LG Electronics DVD Player XBV613 User Manual

V1310MZ.NA1ULZ_ENG

Installation and Operating Guide | Warranty

Model Number | XBV613 | DVD Player + Video Cassette Recorder

For service/

support Call:

Toll Free Number

1-800-243-0000

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND

THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

CAUTION:

This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or

fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installa-

tion, use, and servicing.

This product does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVIC-

ING TO QUALIFIED SERVICE PERSONNEL ONLY.

1. Read these instructions. - All these safety and operating

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience recepta-

cles, and the point where they exit from the product.

instructions should be read before the product is operated.

2. Keep these instructions. - The safety, operating and use

instructions should be retained for future reference.

11. Only use attachments/accessories specified by the

manufacturer.

3. Heed all warnings. - All warnings on the product and in

the operating instructions should be adhered to.

4. Follow all instructions. - All operating and use instruc-

tions should be followed.

5. Do not use this product near water. – For example: near

a bath tub, wash bowl, kitchen sink, laundry tub, in a wet

basement; or near a swimming pool; and other areas

located near water.

6. Clean only with dry cloth. – Unplug this product from the

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with appara-

tus. When a cart is used, use caution when moving

the cart/product combination to avoid injury from

tip-over.

wall outlet before cleaning. Do not use liquid cleaners.

7. Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions. Slots and

openings in the cabinet are provided for ventilation and to

ensure reliable operation of the product and to protect it

from over- heating. The openings should never be blocked

by placing the product on a bed, sofa, rug or other similar

surface. This product should not be placed in a built-in

installation such as a bookcase or rack unless proper ven-

tilation is provided or the manufacturer’s instructions have

been adhered to.

13. Unplug this product during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the product has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the product, the product has been

exposed to rain or moisture, does not operate nor-

mally, or has been dropped.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Operations - VCR . . . . . . . . . . . . . .19-25

Introduction . . . . . . . . . . . . . . . . . . . . .5-9

Moisture Condensation . . . . . . . . . . . . . . . . . .5

Symbol Used in this Manual . . . . . . . . . . . . .5

VCR Tape Playback . . . . . . . . . . . . . . . . .19-20

Basic Instructions . . . . . . . . . . . . . . . . . . . . .19

Auto Tracking . . . . . . . . . . . . . . . . . . . . . . . .19

Manual Tracking . . . . . . . . . . . . . . . . . . . . . .19

Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Still Picture and Frame-by-Frame Playback .19

Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .20

CM SKIP (Commercial Skip) . . . . . . . . . . . . .20

About the

Symbol Display . . . . . . . . . . . .5

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5

About the Remote Control . . . . . . . . . . . . . . .5

Types of Playable Discs . . . . . . . . . . . . . . . . .6

Regional code . . . . . . . . . . . . . . . . . . . . . . . .6

Selecting the Viewing Source . . . . . . . . . . . . .6

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Remote Control . . . . . . . . . . . . . . . . . . . . . . . .8

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

VHS Hi-Fi Stereo/MTS Broadcast . . . . . . . . .20

Hi-Fi Stereo Audio Sound . . . . . . . . . . . . . . .20

MTS (Multi-Channel TV Sound) . . . . . . . . . .20

VCR Tape Recording . . . . . . . . . . . . . . . .21-24

Basic Instructions . . . . . . . . . . . . . . . . . . . . .21

Timer Recording . . . . . . . . . . . . . . . . . . .21-22

Instant Timer Recording . . . . . . . . . . . . . . .23

Recording from External Components . . . . .23

Copying from DVD to VCR . . . . . . . . . . . . .24

On-Screen Display - VCR . . . . . . . . . . . . . . .24

Additional VCR Information . . . . . . . . . . . . .25

VCR Auto Play System . . . . . . . . . . . . . . . . .25

S-VHS Quasi Playback (SQPB) . . . . . . . . . .25

Easy Information . . . . . . . . . . . . . . . . . . . . .25

Preparation . . . . . . . . . . . . . . . . . . . .9-18

Connecting an Antenna or Cable TV . . . . . . .10

Basic TV Connections . . . . . . . . . . . . . . .10-11

Optional TV Connections . . . . . . . . . . . . . . .11

Connection to an amplifier . . . . . . . . . . . . . .12

Initial Settings - VCR . . . . . . . . . . . . . . . .13-14

General Operation . . . . . . . . . . . . . . . . . . . .13

CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

• Auto Clock Set . . . . . . . . . . . . . . . . . . . . .13

• Manual Clock Set . . . . . . . . . . . . . . . . . . .13

PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . .13

TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . .14

• Auto Channel Programming . . . . . . . . . .14

• To Add or Erase Channels . . . . . . . . . . . .14

SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

• FUNCTION OSD . . . . . . . . . . . . . . . . . .14

• AUDIO MODE . . . . . . . . . . . . . . . . . . . . .14

• BROADCAST TYPE

Operations - DVD . . . . . . . . . . . . . .26-32

Playback Setup . . . . . . . . . . . . . . . . . . . . . . .26

General Features . . . . . . . . . . . . . . . . . . .26-27

Additional Features . . . . . . . . . . . . . . . .27-28

Playing an Audio CD or MP3/WMA Disc . . .29

Programmed Playback . . . . . . . . . . . . . . . .29

Viewing a JPEG Disc . . . . . . . . . . . . . . . . . .30

Playing a DivX Movie file . . . . . . . . . . . . . . . .31

Playing a DVD VR format Disc . . . . . . . . . . .32

Maintenance and Service . . . . . . . . . . . . . . .32

(STEREO/SAP/MONO) . . . . . . . . . . . . . .14

• AUDIO OUTPUT

(STEREO/LEFT/RIGHT) . . . . . . . . . . . . .14

Displaying Disc Information on-screen . . . .15

Reference . . . . . . . . . . . . . . . . . . . . . . .33

Initial Settings - DVD . . . . . . . . . . . . . . . .15-18

General Operation . . . . . . . . . . . . . . . . . . . .15

LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . .16

DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . .16

AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . .17

LOCK (Parental Control) . . . . . . . . . . . . . . .18

Language Codes List . . . . . . . . . . . . . . . . . .33

Area Codes List . . . . . . . . . . . . . . . . . . . . . . .33

Troubleshooting . . . . . . . . . . . . . . . . . . .34-35

Specifications . . . . . . . . . . . . . . . . . . . . . . . .36

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

To ensure proper use of this product, please read this

owner’s manual carefully and retain for future refer-

ence.

Storing Discs

After playing, store the disc in its case. Do not

expose the disc to direct sunlight or sources of heat

and never leave it in a parked car exposed to direct

sunlight.

This manual provides information on the operation

and maintenance of your DVD+VCR. Should the unit

require service, contact an authorized service loca-

tion.

Cleaning Discs

Fingerprints and dust on the disc can cause poor pic-

ture quality and sound distortion. Before playing,

clean the disc with a clean cloth. Wipe the disc from

the center out.

Moisture Condensation

Never operate the DVD+VCR immediately after mov-

ing it from a cold location to a warm location. Leave it

for two or three hours without operating it. If you use

the DVD+VCR in such a situation, it may damage

discs/tapes and internal parts.

Symbol Used in this Manual

Note:

Indicates special notes and operating

features.

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

Tip:

Indicates tips and hints for making the task

easier.

A section whose title has one of the following sym-

bols is applicable only to the disc represented by the

symbol.

About the Remote Control

Operation Range

ALL

All discs listed below

DVD and finalized DVD R/RW

Point the remote control at the remote sensor and

press the buttons.

DVD

ACD

Distance: About 23 ft (7 m) from the front of the

Audio CDs

MP3 files

WMA files

DivX files

remote sensor.

MP3

Angle:

About 30° in each direction of the front of the

remote sensor.

WMA

DivX

Battery installation

Detach the battery cover on the rear of

About the Symbol Display

the remote control, and insert two

(R03/AAA) size batteries with 3 and #

aligned correctly.

“

” may appear on your TV display during opera-

tion and indicates that the function is not permitted by

this unit or the disc.

Caution: Do not mix old and new batteries and

never mix different types of batteries such as

standard, alkaline, etc.

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the

disc by the edges so that fingerprints do not get on

the surface. Never stick paper or tape on the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes on Copyrights:

It is forbidden by law to copy, broadcast, show,

broadcast via cable, play in public, or rent copyright-

ed material without permission.

Types of Playable Discs

DVD

(8 cm / 12 cm disc)

Audio CD

This product features the copy protection function

developed by Macrovision. Copy protection signals

are recorded on some discs. When recording and

playing the pictures of these discs picture noise will

appear. This product incorporates copyright protec-

tion technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection tech-

nology must be authorized by Macrovision

(8 cm / 12 cm disc)

In addition, this unit plays DVD R/RW and CD-R/RW

that contains audio titles, MP3, WMA, DivX and/or

JPEG files.

This indicates a product feature that is

capable of playing DVD-RW discs recorded

with Video Recording format.

Corporation, and is intended for home and other limit-

ed viewing uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering or dis-

assembly is prohibited.

Notes:

•

Depending on the conditions of the recording

equipment or the CD-R/RW (or DVD R/RW) disc

itself, some CD-R/RW (or DVD R/RW) discs

cannot be played on the unit.

Notice for Progressive Scan Use

•

Only plays if DVD-RW is recorded in Video mode

and has been finalized.

CONSUMERS SHOULD NOTE THAT NOT ALL

HIGH DEFINITION TELEVISION SETS ARE FULLY

COMPATIBLE WITH THIS PRODUCT AND MAY

CAUSE ARTIFACTS TO BE DISPLAYED IN THE

PICTURE. IN CASE OF 525 PROGRESSIVE SCAN

PICTURE PROBLEMS, IT IS RECOMMENDED

THAT THE USER SWITCH THE CONNECTION TO

THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE

ARE QUESTIONS REGARDING OUR TV SET COM-

PATIBILITY WITH THIS MODEL 525p DVD+VCR,

PLEASE CONTACT OUR CUSTOMER SERVICE

CENTER.

Do not use irregularly shaped CDs (e.g., heart-

shaped or octagonal) since they may result in

malfunctions.

• This DVD+VCR requires discs and recordings to

meet certain technical standards in order to

achieve optimal playback quality. Pre-recorded

DVDs are automatically set to these standards.

There are many different types of recordable disc

formats (including CD-R containing MP3 or WMA

files) and these require certain pre-existing condi-

tions (see above) to ensure compatible playback.

Customers should note that permission is

required in order to download MP3 / WMA files

and music from the Internet. Our company has

no right to grant such permission. Permission

should always be sought from the copyright

owner.

Selecting the Viewing

Source

You must select one of your output sources (DVD or

VCR) to view on the TV screen.

•

If you want to view DVD deck output source:

Regional code

This unit has a regional code printed on the rear of

the unit. This unit can play only DVD discs labelled

same as the rear of the unit or “ALL”.

Press DVD until DVD indicator in the display

window lights and output source of DVD deck is

viewed on the TV screen.

If you want to view VCR deck output source:

Press VCR until VCR indicator in the display

window lights and output source of VCR deck is

viewed on the TV screen.

Notes on Regional Codes

•

Most DVD discs have a globe with one or more

numbers in it clearly visible on the cover. This

number must match your DVD+VCR’s regional

code or the disc cannot play.

Notes:

•

If you insert a disc while the DVD+VCR is in the

VCR mode, the DVD+VCR will switch to DVD

mode automatically.

•

If you try to play a DVD with a different region

code from your player, the message “Check

Regional Code” appears on the TV screen.

•

If you insert a cassette tape without prevention

tab while the DVD+VCR is in the DVD mode, the

DVD+VCR will switch to VCR mode automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel

DVD

VCR

REC

g h i jklm

Disc Tray (DVD deck)

Remote Sensor

Insert a disc here.

Point the DVD+VCR remote control here.

Cassette Compartment (VCR deck)

Insert a video cassette here.

Z VCR

Ejects the tape in the VCR deck.

1 POWER

Switches the DVD+VCR ON and OFF.

./m

- DVD: Skip to beginning of current chapter or track,

press twice in quick successions to go to previous

chapter or track. Press and hold button for about two

seconds to search backward.

CH (V/v)

To scan up or down through memorized channels.

- VCR: Rewinds the tape during the stop mode or for

fast reverse picture search.

Z DVD

Opens or closes the disc tray.

Starts playback of a disc or tape.

Display Windows

The DVD deck is selected.

DVD

M/>

DVD: Skip to next chapter or track. Press and hold for

two seconds for a fast forward search.

VCR: Advances the tape during the STOP mode or

for fast forward picture search.

A disc is in the DVD deck.

(Lights when a disc is in the DVD deck

and Flashes when no disc.)

Indicates when the Progressive scan is

active.

[P]

Stops playback of the disc or tape.

Indicates repeat mode.

DVD/VCR (output select)

Select one of your output sources to view on the TV

DVD+VCR is in timer recording or a timer

recording is programmed (VCR part only).

screen between DVD and VCR.

LINE2 (VIDEO/AUDIO (L/R))

A cassette is in the VCR deck.

Connect to the audio/video output of an external

source (Audio system, TV/Monitor, Another VCR).

The VCR deck is selected.

VCR

DVD+VCR is Recording. (VCR part only)

Indicates PM time. (AM is not displayed.)

Lights when TV mode is active.

REC

Indicates total playing time,

elapsed time, remaining time

or current deck status

(Playback, Pause, etc).

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

CLK/CNT Switches between the clock, tape counter and

tape remaining modes on the display.

DISC MENU Accesses menu on a DVD disc.

SETUP/MENU

Accesses or removes DVD Setup menu

and VCR menu.

b B v V Selects menu options.

CH/TRK(v/V) Selects VCR channels. Adjusts

manually the tape’s picture onscreen.

ENTER/OK Confirms menu selections. Displays functions

on the TV screen.

RETURN (O) Removes the setup menu.

PAUSE/STEP (X) Pause playback or recording.

Press repeatedly for frame-by-frame

playback.

SKIP (. / >) Go to next chapter or track. Returns

to beginning of current chapter

or track or go to previous chapter

or track.

STOP (x) Stops playback or recording.

BACKWARD / FORWARD (m / M)

- DVD: Search backward or forward.

- VCR: Rewinds/Advances the tape during the STOP

mode, for fast backward/forward picture search.

PLAY (N) Starts playback.

PROGRAM Places a track on the program list.

CLEAR Removes a mark on the Marker Search menu.

0-9 Selects numbered options in a menu.

AUDIO Selects an audio language (DVD).

SUBTITLE Selects a subtitle language.

ANGLE Selects a DVD camera angle, if available.

ZOOM Enlarges DVD video image.

MARKER Marks any point during playback.

SEARCH Displays Marker Search menu.

TITLE Displays the disc’s Title menu, if available.

POWER Switches DVD+VCR ON and OFF.

OPEN/CLOSE Opens and closes the disc tray.

EJECT Ejects the tape in the VCR deck.

REC/ITR (z) Starts recording. Press repeatedly to set

the recording time.

TV/VCR To view channels selected by the VCR tuner

REPEAT Repeat chapter, track, title or all.

or by the TV tuner.

RANDOM Plays tracks in random order.

DVD Select the DVD+VCR function mode to DVD.

CM SKIP

Fast forwards picture search through

30 seconds of recording.

VCR Select the DVD+VCR function mode to VCR.

INPUT Selects the VCR deck’s source

A-B Repeats sequence between two points (A and B).

(Tuner, LINE 1, or LINE 2).

SPEED Selects recording speed.

DISPLAY

Accesses On-Screen Display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

Caution

Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause

permanent damage to the unit.

b c d e

ANT.IN

AC Power Cord

Plug into the power source.

Connect the VHF/UHF/CATV antenna to this terminal.

VCR IN LINE 1 (VIDEO/AUDIO (Left/Right))

Connect the audio/video output of an external source

(Audio system, TV/Monitor, VCR, Camcorder).

RF. OUT

Connect to a TV with RF coaxial inputs.

COAXIAL (DIGITAL AUDIO OUT jack)

(DVD OUT)

Connect to digital (coaxial) audio equipment.

DVD/VCR OUT (VIDEO/AUDIO (Left/Right))

Connect to a TV with video and audio inputs.

COMPONENT/PROGRESSIVE SCAN VIDEO

OUT (Y Pb Pr) (DVD OUT)

Connect to a TV with Y Pb Pr inputs.

S-VIDEO OUT (DVD OUT)

Connect to a S-Video Input on TV.

AUDIO OUT (Left/Right) (DVD OUT)

Connect to a TV or other equipment with audio inputs.

Preparation

Depending on your TV and other equipment there are various ways you can connect the

player. Please refer to the manuals of your TV, VCR, stereo system or other devices as nec-

essary for additional connection information.

Notes:

•

The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from

each other or turn off the unit after removing the disc.

•

Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel.

Do not connect the DVD+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not con-

nect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection system.

Download from Www.Somanuals.com. All Manuals Search And Download.

To view or record a CATV channel

Connecting an Antenna

or Cable TV

Tune the TV to the DVD+VCR output channel

(CH 3 or 4).

Set the DVD+VCR channel selector to the cable

output channel. (Example: CH3)

Antenna:

Disconnect the antenna from the rear of the TV and

identify the antenna cable. If it is a round 75 ohm

coaxial cable connect it directly to the jack marked

ANT.IN on your DVD+VCR. If your antenna cable is

flat connect it to a 300-ohm to 75-ohm antenna adap-

tor (not supplied) and slip the adaptor over the

ANT.IN jack. Don’t attempt to screw it into to the

DVD+VCR.

Select a channel using the cable converter.

Notes:

•

With this connection, you cannot record one program

while viewing another.

•

If you are using a cable box to tune channels, it is not

necessary to do Auto Channel Set.

Cable TV:

If your cable connection has no converter or

Basic TV Connections

descrambler, unscrew the cable from your TV and

attach it to the ANT.IN jack on the DVD+VCR. If a

converter is required connect a coaxial cable from the

wall jack to the IN connector on the converter, and a

coaxial cable from the OUT connector on the convert-

er to the ANT.IN on your DVD+VCR. This cable

hookup permits both TV and DVD+VCR operation.

Make one of the following connections, depending on

the capabilities of your TV.

Rear of TV

ANTENNA

INPUT

VIDEO

INPUT

AUDIO INPUT

Antenna

Rear of DVD+VCR

COMPONENT/PROGRESSIVE SCAN

VIDEO INPUT

AUDIO INPUT

S-VIDEO

INPUT

Rear of TV

Download from Www.Somanuals.com. All Manuals Search And Download.

RF coaxial connection

Optional TV Connections

These connections support only DVD playback. The

tuner and VCR still output through the RF.OUT (R) or

DVD/VCR OUT (A, V) jacks.

Connect the RF.OUT jack on the DVD+VCR to the

antenna in jack on the TV using the supplied 75-ohm

Coaxial Cable (R).

How to set the DVD+VCR’s RF output

channel

S-Video connection

Connect the S-VIDEO OUT jack on the DVD+VCR

to the S-Video in jack on the TV using the optional

S-Video cable (S).

1. When the DVD+VCR is turned off, press and hold

CH (V/v) on the front panel for more than five

seconds. “RF03” or “RF04” appears in the display

window.

Component Video / Progressive Scan

connection

2. Press CH (V/v) to change the RF output channel

(RF03 or RF04). Tune the TV to this channel.

If your television is a high-definition or “digital ready”

television, you may take advantage of the

DVD+VCR’s progressive scan output for higher

video resolution.

3. Turn off the DVD+VCR.

Audio/Video connection

Connect the COMPONENT/PROGRESSIVE SCAN

VIDEO OUT jacks on the DVD+VCR to the corre-

sponding in jacks on the TV using an optional Y Pb

Pr cable (C).

1. Connect the DVD/VCR VIDEO OUT jack on the

DVD+VCR to the video in jack on the TV using

the video cable supplied (V).

2. Connect the Left and Right DVD/VCR AUDIO

OUT jacks on the DVD+VCR to the audio left/right

in jacks on the TV (A1) using the supplied audio

cables.

Notes:

•

Progressive scan does not work with the analog video

connections (yellow VIDEO OUT jack and S-VIDEO

OUT jack).

Note:

If you use this connection, set the TV’s source selector to

VIDEO.

•

When you use Component Video signal, set the

Progressive Scan to “Off” on the setup menu.

If your TV does not accept the Progressive Scan format,

the picture will appear scrambled.

Audio connection

Connect the Left and Right AUDIO OUT jacks of the

DVD+VCR to the audio left/right in jacks on the TV

using the supplied audio cables (A2).

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to an Amplifier

Rear of DVD+VCR

You can only listen to DVD playback using COAXIAL

(X) and AUDIO OUT (A2) connections. The tuner and

VCR will still be heard through the RF.OUT (R) or

DVD/VCR AUDIO OUT (A1) jack. (See page 10.)

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Pro Logic II/Pro

Logic

Connect the Left and Right AUDIO OUT (or

DVD/VCR AUDIO OUT) jacks on the DVD+VCR to

the audio left and right in jacks on your amplifier,

receiver, or stereo system using the audio cables

(A1, A2) supplied.

COAXIAL

AUDIO INPUT

DIGITAL INPUT

Amplifier (Receiver)

Connecting to an amplifier equipped with two

channel digital stereo (PCM) or to an Audio/Video

receiver equipped with a multi-channel decoder

(Dolby Digital™, MPEG 2, or DTS)

Manufactured under license from Dolby

Laboratories. “Dolby”, “Pro Logic”, and the

double-D symbol are trademarks of Dolby

Laboratories.

1. Connect one of the DVD+VCR’s DIGITAL AUDIO

OUT jacks (COAXIAL X) to the corresponding in

jack on your amplifier. Use an optional digital

(COAXIAL X) audio cable.

DTS and DTS Digital Out are trademarks of

Digital Theater Systems, Inc.

2. You will need to activate the DVD+VCR’s digital

output. (See “AUDIO” on page 17).

Accessory Audio/Video (A/V) Connections to

DVD+VCR

Digital Multi-channel sound

Connect the VCR IN LINE 1 or LINE 2 jacks on the

DVD+VCR to the audio/video out jacks on your

accessory component, using the optional audio/video

cables. (Refer to page 23 for “Recording from

External Components”.)

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your DVD+VCR (MPEG

2, Dolby Digital and DTS). Check the receiver manual

and the logos on the front of the receiver.

Caution:

Due to the DTS Licensing agreement, the digital

output will be in DTS digital out when DTS audio

stream is selected.

Notes:

•

If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will pro-

duce a strong, distorted sound or no sound at all.

Six Channel Digital Surround Sound via digital connec-

tion can only be obtained if your receiver is equipped

with a Digital Multi-channel decoder.

To see the audio format of the current DVD in the on-

screen display, press AUDIO.

Download from Www.Somanuals.com. All Manuals Search And Download.

• AUTO CLOCK SET

Initial Settings - VCR

The Auto Clock Set feature is set to ON at the fac-

tory. In the ON setting, the DVD+VCR looks for a

channel carrying XDS (Extended Data Services)

information. XDS updates the clock using the

Coordinated Universal Time.

By using the VCR Setup menu, you can make

various adjustments to items such as clock setting,

and timer recordings.

- Use b / B to choose ON or OFF.

• DAYLIGHT SAVINGS

Your DVD+VCR allows remote control adjustment of

several features.

You can turn Daylight Savings On or Off manually.

If you choose “AUTO”, the DVD+VCR sets the

clock using the DST information broadcast in the

signal (channel).

General Operation

1. Press VCR on the remote control.

- Use b / B to choose AUTO, ON or OFF.

2. Press MENU and the MAIN menu will appear.

• TIME ZONE

You can set your local Time Zone manually. If you

choose “AUTO”, the DVD+VCR sets the clock

using the first Coordinated Universal Time informa-

tion it finds in a broadcast signal.

- Use b / B to choose the correct time zone

(AUTO, EASTERN, CENTRAL, MOUNTAIN,

PACIFIC, ALASKA or HAWAII).

Notes:

3. Use v / V to select the desired menu, then press

•

The Auto Clock feature enables the DVD+VCR to set up

ENTER/OK.

the clock while the DVD+VCR is turned off.

•

There are cases where the TV station does not send or

sends wrong date and/or time information and the

DVD+VCR sets the incorrect time. If this happens we

recommend that you set the clock manually.

4. Use v / V to choose a desired option on the seleted

Menu. Then use b / B to choose a desired setting.

5. Press MENU when finished.

Note:

Manual Clock Set

Menus remain on-screen for 3 minutes.

Use v / V / b / B to enter the necessary information.

•

MONTH : Choose the month.

•

DAY : Choose the date.

The day of the week will display automatically.

CLOCK

• YEAR : Choose the year.

• TIME : Choose the time.

The DVD+VCR gives you two ways to set the time

and date: the Auto Clock Feature or Manually.

Press and hold b / B to advance clock continuously.

Notes:

•

Auto Clock Set

If setting the clock manually, “AUTO CLOCK SET” must

set to “OFF”. If it is set to “ON”, an incorrect date and/or

time will be entered again when the DVD+VCR is turned

off.

•

The clock uses the 12-hour system. Be sure to set AM

and PM correctly.

PROGRAM

The Timer Recording function allows you to record up

to 8 programs within a period of one year. (See pages

21-22).

Download from Www.Somanuals.com. All Manuals Search And Download.

TUNING

SETUP

This DVD+VCR is equipped with a frequency synthe-

sized tuner capable of receiving up to 181 channels.

These include VHF channels 2-13, UHF channels

14-69 and CATV channels 1-125.

Auto Channel Programming

FUNCTION OSD

The on-screen display can be turned on or off.

AUDIO MODE

The DVD+VCR has two separate audio playback sys-

tems, the high quality VHS Hi-Fi system and standard

NORMAL mono system. The same audio is generally

recorded on both systems. The VHS Hi-Fi system

plays on separate (left and right) channels, and the

NORMAL system plays monaural sound. The normal

track is always played so the cassette can be played

on a DVD+VCR that does not have VHS Hi-Fi.

1. Choose the SOURCE SELECT option, then use

b / B to select TUNER.

Use b / B to switch among TUNER, LINE1, and LINE2.

2. Choose the AUTO CHANNEL SET option, then

use b / B to find channels.

• The tuner will automatically cycle through all available

channels (TV/CATV) in the area and place them in

the tuner’s memory.

BROADCAST TYPE (STEREO/SAP/MONO)

Multichannel Television Sound (MTS) carries stereo

and/or Second Audio Program (SAP) bilingual sig-

nals. Set this display to the desired position when

both MTS stereo and SAP signals are received.

When only one of the MTS signal is received, the

DVD+VCR automatically selects the corresponding

receiving mode (Stereo or SAP) regardless of the

selected position. For normal operation, the display

should be in the STEREO position. The DVD+VCR

will then record a STEREO program when available,

and record a mono program IF the program is NOT

IN STEREO. For weak STEREO and/or SAP broad-

casts, changing the display to mono may give clearer

sound.

• After the AUTO CHANNEL SET is complete, the

TUNING menu will hide and return to the TV screen

automatically.

3. Make sure the TUNING BAND is set appropriately

(TV or CATV).

• TV : If you are using a standard antenna to receive

channels.

• CATV : If you are using basic cable to receive

channels.

To Add or Erase Channels

This feature allows you to add or erase channels

from memory manually.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

1. Choose the CH. ADD/DEL option, then use b / B

Used during playback [when AUDIO MODE (HI-

FI/NORMAL) is in HI-FI position] for selecting the

audio output signals from the AUDIO OUT terminals

(L ch and R ch), and RF.OUT. This display setting

should normally be left in the stereo position, so that

when a stereo tape is played, the stereo sound will

be heard through the left and right channels. If a

mono tape is played and the audio output is set to

stereo, the same mono sound will be heard from both

left and right channels.

to select a channel to add or erase.

2. Use ENTER/OK to add or erase the channel.

Repeat steps 1 and 2 to add or erase other

channels.

3. Press MENU to return to the TV screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Displaying Disc Information

on-screen - DVD

Initial Settings - DVD

By using the DVD Setup menu, you can make vari-

ous adjustments to items such as picture and sound.

You can also set a language for the subtitles and the

Setup menu, among other things. For details on each

Setup menu item, see pages 16 to 18.

You can display various information about the disc

loaded on-screen.

1. Press DISPLAY to show various playback infor-

mation.

To display and exit the Menu:

The items displayed differ depending on the disc

type or playing status.

Press SETUP/MENU to display the menu. A second

press of SETUP/MENU will take you back to initial

screen.

1 / 3

1 / 12

To go to the next level:

Press B on the remote control.

To go back to the previous level:

0:20:09

Press b on the remote control.

ABC

1 ENG

General Operation

1 / 1

1. Press DVD on the remote control.

3D SUR

2. Press SETUP/MENU. The Setup menu appears.

3. Use v / V to select the desired option then press

B to move to the second level. The screen shows

the current setting for the selected item, as well

as alternate setting(s).

2. You can select an item by pressing v / V and

change or select the setting by pressing b / B.

^ꢀTitle (Track) – Current title (or track)

number/total number of titles (or tracks)

^ꢀChapter – Current chapter number/total number

of chapters

4. Use v / V to select the second desired option

then press B to move to the third level.

^ꢀTime – Elapsed playing time

5. Use v / V to select the desired setting then press

ENTER/OK to confirm your selection. Some items

require additional steps.

^ꢀAudio – Selected audio language or channel

^ꢀSubtitle – Selected subtitle

^ꢀAngle – Selected angle/total number of angles

^ꢀSound – Selected sound mode

6. Press SETUP/MENU or PLAY (N) to exit the

Setup menu.

Note:

If no button is pressed for a few seconds, the on-

screen display disappears.

Download from Www.Somanuals.com. All Manuals Search And Download.

Progressive Scan

LANGUAGE

Progressive Scan Video provides the highest quality

pictures with less flickering.

If you are using the Component Video jacks for con-

nection to a TV or monitor that is compatible with a

progressive scan signal, set Progressive Scan to On.

To turn on progressive scan:

Connect component/progressive out of this unit to the

input of your monitor/television, set your television or

monitor to component/progressive Input.

Menu Language

Select a language for the VCR and DVD’s setup

menu and information display.

1. Select “Progressive Scan” on the DISPLAY menu

then press B.

Disc Audio / Subtitle / Menu

2. Select “On” using the v / V buttons.

Select the language you prefer for the audio track

(disc audio), subtitles, and the disc menu.

3. Pressing ENTER/OK will set this unit to progres-

sive scan mode.

Original: Refers to the original language in which the

disc was recorded.

Note:

If you set Progressive Scan to ON in error, you must reset

the DVD+VCR. Press STOP (x) and hold it for more then

five seconds before releasing it. The video output will be

restored to the standard setting, and a

picture will once again be visible on a conventional analog

TV or monitor.

Other: To select another language, press number

buttons then ENTER/OK to enter the corresponding

4-digit number according to the language code list in

the reference chapter (see page 33). If you enter the

wrong language code, press CLEAR.

Off (for Disc Subtitle) : Turn off Subtitle.

DISPLAY

TV Aspect

4:3 :

Select when a standard 4:3 TV is connected.

16:9 : Select when a 16:9 wide TV is connected.

Display Mode

Display Mode setting works only when the TV Aspect

mode is set to “4:3”.

Letterbox: Displays a wide picture with bands on the

upper and lower portions of the screen.

Panscan: Automatically displays the wide picture on

the entire screen and cuts off the portions that do not

fit.

Download from Www.Somanuals.com. All Manuals Search And Download.

AUDIO

OTHERS

Each DVD disc has a variety of audio output options.

Set this unit’s AUDIO options according to the type of

audio system you use.

Auto Play

You can set up the DVD+VCR so a DVD disc auto-

matically starts playing whenever the DVD is insert-

ed.

Dolby Digital / DTS / MPEG

Bitstream: Select “Bitstream” if you connect the

DVD+VCR’s DIGITAL AUDIO OUT jack to an

amplifier or other equipment with a Dolby Digital,

DTS or MPEG decoder.

PCM (for Dolby Digital / MPEG): Select when

connected to a two-channel digital stereo amplifi-

er. DVDs encoded in Dolby Digital or MPEG will

be automatically downmixed to two-channel PCM

audio.

If Auto Play mode is set to On, this DVD player will

search for title that has the longest playback time and

then play back the title automatically.

On: Auto Play function is active.

Off: Auto Play function is not active.

Note:

The Auto Play function may not work for some DVDs.

Off (for DTS): If you select “Off”, the DTS signal

is not output through the DIGITAL AUDIO OUT

jack.

B.L.E. (Black Level Expansion)

To select the black level of playback pictures. Set

your preference and monitor’s ability.

Sample Freq. (Frequency)

On: Expanded grey scale. (0 IRE cut off)

If your receiver or amplifier is NOT capable of han-

dling 96 kHz signals, select 48 kHz. When this choice

is made, this unit automatically converts any 96 kHz

signals to 48 kHz so your system can decode them.

Off: Standard grey scale. (7.5 IRE cut off)

DivX(R) VOD

If your receiver or amplifier is capable of handling 96

kHz signals, select 96 kHz. When this choice is

made, this unit passes each type of signal through

without any further processing.

We provide you the DivX^®VOD (Video On Demand)

registration code that allows you to rent and purchase

videos using the DivX^®VOD service. For more infor-

mation, visit www.divx.com/vod.

Check the documentation for your amplifier to verify

1. Select “DivX(R) VOD” option then press B.

its capabilities.

2. Press ENTER/OK while “Select” is selected and

DRC (Dynamic Range Control)

the registration code will appear.

Use the registration code to purchase or rent the

videos from DivX^®VOD service at

With the DVD format, you can hear a program’s

soundtrack in the most accurate and realistic presen-

tation possible, thanks to digital audio technology.

However, you may wish to compress the dynamic

range of the audio output (the difference between the

loudest sounds and the quietest ones). This allows

you to listen to a movie at a lower volume without los-

ing clarity of sound. Set DRC to On for this effect.

www.divx.com/vod. Follow the instructions and

download the video onto a disc for playback on

this unit.

3. Press ENTER/OK to exit.

Note:

All the downloaded videos from DivX^®VOD can only

be played back on this unit.

Vocal

Set to On only when a multi-channel karaoke DVD is

playing. The karaoke channels on the disc mix into

normal stereo sound.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Press ENTER/OK to confirm your rating selection,

then press SETUP/MENU to exit the menu.

5. Press OPEN/CLOSE (Z) to activate parental

control.

LOCK (Parental Control)

Password (Security Code)

You can enter or change password.

1. Select “Password” on the LOCK menu then press

Rating

2. Follow step 2 as shown left column (Rating).

To change the password, select the “Change”,

press ENTER/OK and input the new 4-digit code

then press ENTER/OK. Input it again to verify.

Some movies contain scenes that may not be suitable

for children to view. Many of these discs contain

parental control information that applies to the complete

disc or to certain scenes on the disc. Movies and

scenes are rated from 1 to 8, depending on the area.

DVD video discs may or may not respond to the

parental control setting if the Area code of the disc is

set wrongly. Some discs offer more suitable scenes as

an alternative. Ratings are area dependent.

3. Press SETUP/MENU to exit the menu.

If you forget your Security Code

If you forget your security code you can clear it using

the following steps:

The parental control feature allows you to block

access to scenes below the rating you input, thereby

preventing your children from being able to view

material you believe is unsuitable.

1. Press SETUP/MENU to display the Setup menu.

2. Input the 6-digit number “210499” and the security

code is cleared.

1. Select “Rating” on the LOCK menu then press B.

3. Enter a new code as described above.

2. To access the Rating, Password and Area Code

features, you must input the 4-digit security code

you created.

Area Code

Enter the Area Code whose standards were used to

rate the DVD video disc, based on the list in the

reference chapter (see page 33).

If you have not yet entered a security code you are

prompted to do so. Input a 4-digit code and press

ENTER/OK. Enter it again and press ENTER/OK

to verify. If you make a mistake before pressing

ENTER/OK, press CLEAR.

1. Select “Area Code” on the LOCK menu then

press B.

3. Select a rating from 1 to 8 using the v / V buttons.

2. Follow step 2 as shown left (Rating).

1-8: Rating one (1) has the most restrictions and

rating eight (8) is the least restrictive.

3. Select the first character using v / V buttons.

Unlock : If you select unlock, parental control is

4. Press B and select the second character using

not active and the disc plays in full.

v / V buttons.

5. Press ENTER/OK to confirm your area code

selection.

Note:

If you set a rating for the player, all disc scenes with

the same rating or lower are played. Higher rated

scenes are not played unless an alternate scene is

available on the disc. The alternative must have the

same rating or a lower one. If no suitable alternative

is found, playback stops. You must enter the 4-digit

password or change the rating level in order to play

the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations - VCR

This chapter describes how to operate the VCR and

DVD.

Manual Tracking

To manually adjust the tracking use the CH/TRK (v/V)

buttons on the remote control or CH (v/V) on the front

panel during playback.

VCR Tape Playback

Press the VCR button to select the device to be oper-

ated.

Notes:

•

Vertical jitter requires a very fine adjustment.

Tracking is automatically reset to normal when the

tape is ejected or the power cord is unplugged for

more than 3 seconds.

Basic Instructions

1. Turn on the TV.

2. Tune the TV to the DVD+VCR output channel

(CH 3 or 4) or if a direct VIDEO/AUDIO

connection is made between the DVD+VCR and

the TV, set the TV’s source selector to VIDEO.

This function lets you visually search for a tape sec-

tion in either direction: forward and reverse. During

the high-speed picture search modes, the audio is

muted and horizontal lines (noise bars) appear. Also,

a short time is needed to stabilize the tape speed

when re-entering the PLAY mode so slight interfer-

ence may be observed during this time.

3. Insert a pre-recorded video cassette.

The

indicator lights and the DVD+VCR

powers on automatically.

4. If the

(TIMER) indicator in the display window

is lit, press POWER (1) once.

To search:

5. If a tape without a safety tab is inserted the unit

starts playback automatically.

1. Press BACKWARD (m) or FORWARD (M)

during playback.

If not, press PLAY (N).

2. To return to playback, press PLAY (N).

6. Press STOP (x) to stop playback. If the tape

reaches the end before you press STOP (x) the

DVD+VCR automatically stops, rewinds and

ejects the tape.

Note:

After 3 minutes in SEARCH mode the DVD+VCR

returns to PLAY mode to protect the tape and video

heads.

Note:

It is not necessary to select the tape speed for play-

back because it is automatically selected by the

DVD+VCR. Also, during playback the TV/VCR selec-

tor switches to VCR mode automatically.

Still Picture and Frame-by-Frame Playback

1. Press PAUSE/STEP (X) during playback.

A still picture appears on the TV screen and the

audio is muted.

Auto Tracking

If the still picture vibrates vertically, stabilize it by

Automatic tracking adjusts the picture to remove

snow or streaks and beings when:

using CH/TRK (v/V) on the remote control.

3. Press PAUSE/STEP (X) repeatedly to advance

•

A tape is played for the first time.

The tape speed (SP, LP, SLP) changes.

the video picture one frame at a time.

4. To return to playback, press PLAY (N).

Streaks or snow appear due to scratches on the

tape.

Note:

After 5 minutes in STILL mode the DVD+VCR stops

to protect the tape and video heads.

Download from Www.Somanuals.com. All Manuals Search And Download.

Slow Motion

1. While in still mode, press FORWARD (M). The

tape is played at a speed 1/19 times slower than

the normal speed.

2. Use CH/TRK (v/V) on the Remote Control if

necessary to adjust the tracking.

2. Set the AUDIO OUTPUT option to STEREO so

that the left channel sound (L) is heard from the

left speaker and the right channel sound (R) is

heard from the right speaker.

3. To return to the normal speed, press

PLAY (N).

Notes:

•

During slow motion, audio is muted and horizontal

lines (noise bars) may appear on the TV

screen.This is normal.

After 3 minutes in SLOW MOTION mode the

DVD+VCR goes back to PLAY mode to protect

the tape and video heads.

•

CM SKIP (Commercial Skip)

The other options are (LEFT) POSITION, which

results in the left channel sound (L) being heard

from both speakers or (RIGHT) POSITION, which

results in the right channel sound (R) being heard

from both speakers.

This feature is useful for skipping commercials or

short program segments.

1. Press CM SKIP in playback mode.

The DVD+VCR performs a fast forward picture

search through 30 seconds of recording.

3. Insert a cassette and press PLAY (N).

2. Press CM SKIP again to extend the search time

by an addition 30 seconds. The maximum search

time is 3 minutes.

MTS (Multi-Channel TV Sound)

3. When the search is complete, the DVD+VCR

goes into playback mode automatically.

This DVD+VCR can decode MTS stereo and bilingual

(SAP) off-the-air broadcast sound signals. It also

decodes stereo TV sound from local cable companies

as long as they operate on assigned cable frequen-

cies and use the EIA-recommended MTS stereo/bilin-

gual TV sound system.

VHS Hi-Fi Stereo/

MTS Broadcast

Multichannel TV Sound Indicator (MTS)

When you press ENTER/OK one or both of the indi-

cators appears on the TV Screen.

This DVD+VCR is equipped with the VHS Hi-Fi audio

sound system for recording and playback. The infor-

mation below gives a brief description of Hi-Fi audio

and how to record and play a tape in the Hi-Fi audio

mode.

STEREO

The DVD+VCR can record in stereo onto the VHS

Hi-Fi audio tracks when the BROADCAST TYPE

option is in the STEREO position. The DVD+VCR

can also record mono audio onto the mono audio

track.

Hi-Fi Stereo Audio Sound

A stereo TV with AUDIO/VIDEO input jacks or a

stereo audio system is required for true stereo play-

back. To experience the full and rich stereo sound

available with Hi-Fi recorded tapes, we recommend

the connection of this unit to a home stereo audio

system.

SAP

Some stations transmit a Second Audio Program,

which is used for a second language or additional

information.

1. Set the AUDIO MODE option to HI-FI on the VCR

SETUP menu .

STEREO/SAP

Use the BROADCAST TYPE option to select the

desired recording mode (STEREO or SAP).

Download from Www.Somanuals.com. All Manuals Search And Download.

To record one TV program while watching

another

VCR Tape Recording

Basic Instructions

1. Press TV/VCR to select the TV mode during

recording. The TV indicator appears.

1. Turn on the DVD+VCR and TV.

2. Using the TV, select the channel to be viewed.

2. Tune the TV to the DVD+VCR output channel

(CH 3 or 4) or if a direct VIDEO/AUDIO connec-

tion is made between the DVD+VCR and the TV,

set the TV’s source selector to VIDEO.

Timer Recording

3. Insert a video cassette with the safety tab intact.

For unattended recording, you must input the

channels to be recorded and the starting and ending

times.

4. Select the desired channel using CH/TRK (v/V).

5. If you are recording from another source via

audio/video input jacks (at the rear or front panel),

select LINE1 or LINE2 using INPUT.

Things to know before starting

If you try to set the program timer before setting

the clock, “PLEASE SET THE CLOCK” appears

for a moment and then CLOCK menu appears on

the TV screen. Set the time and date before

proceeding.

6. Set the desired recording speed (SP or SLP) by

pressing SPEED. This DVD+VCR is not designed

to record in LP mode.

7. Set the MTS mode (STEREO or SAP). Set the

BROADCAST TYPE option to SAP if applicable.

1. Turn on the DVD+VCR and the TV.

8. Press REC/ITR (z) and recording starts. The

REC indicator appears in the display window. If a

cassette with no safety tab is loaded, the cassette

is ejected.

2. Be sure the TV is set to the DVD+VCR output

channel (3 or 4).

3. Make sure the TUNING BAND in the TUNING

menu is set appropriately (TV or CATV).

9. Press STOP (x) to stop recording. If the tape

reaches the end before STOP (x) is pressed, the

DVD+VCR stops, rewinds and ejects the tape.

4. Press MENU and the MAIN menu appears.

5. Use v / V to choose the PROGRAM menu and

Tip:

press ENTER/OK.

Use PAUSE/STEP (X) for best results when making

changes while recording. For example, if you want to

change channels while recording, first press

PAUSE/STEP (X) to put the unit in pause mode,

select the desired channel on the DVD+VCR, and

then press PAUSE/STEP (X) again to resume

recording.

Note:

If eight programs are already entered, the FULLY

PROGRAMMED message appears for a moment

and then PROGRAM 1 appears on the TV

screen.

During the VCR recording mode, you cannot change

to the DVD mode.

To pause the recording

6. Use the v / V buttons to switch between the

program options, and the b / B buttons to input

the program information:

1. Press PAUSE/STEP (X) to pause the tape during

recording. The REC indicator flashes in the display

window.

Input the month, day, start and stop times of the

program you want to record.

2. When you want to continue recording, press

PAUSE/STEP (X) or press REC/ITR (z).

After 5 minutes in PAUSE mode, the DVD+VCR

stops automatically to protect the tape and the

video heads.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANNEL: Select a TV channel, LINE1 or

LINE2.

Checking or Erasing the Timer Program

If you have CABLE TV and use a cable box (con-

verter) you must set the channel to match the

cable box output channel (usually CH 3 or 4).

Change channels on the cable box instead of with

the DVD+VCR. If you use a cable converter, you

can program multiple recordings only on the con-

verter box output channel. This is because the

converter determines what channel you view

through your DVD+VCR.

Programming can be checked whenever the

DVD+VCR is turned on.

1. Press MENU and the MAIN menu appears.

2. Use v / V to choose the PROGRAM menu and

press ENTER/OK.

SPEED: AUTO mode determines how much tape

is left and switches the speed from SP to SLP if it

is necessary to complete recording the program. If

this occurs there could be some picture and

sound distortion at the point where the speed

changes.

3. Use b / B to select a program you want to check

or erase. To erase the program, press CLEAR.

REPEAT: To record up to 8 programs on a certain

day of every week select WEEKLY. To record up

to 8 programs at the same time Monday through

Friday select DAILY. Otherwise select ONCE.

4. Press MENU to return to the TV screen.

Program Priority

7. Press MENU and the program is memorized by

the DVD+VCR.

If the recording start and end times of preset pro-

grams overlap on the same day (see the example),

the second program is not recorded until the first is

finished.

8. Additional programs may be entered by repeating

steps 1-7.

9. Ensure you insert a tape with the record safety

tab intact before the first programmed time.

10. Press STOP (x) to end timer recording.

Notes:

•

If you make a mistake or want to change a set-

ting, use v to select the option and correct it

using b / B.

In this example, the first part of program numbers 2

and 3 are not recorded.

•

If the program preset time is past, the “PAST

TIME PROGRAMMED” message appears on the

TV screen. Return to the incorrect program and

program it with the correct time.

•

If you enter a past date, the timer recording will

be performed on that date of the next year.

If the power fails or the DVD+VCR is unplugged

the clock and timer settings are kept in memory

for only 3 seconds. Otherwise you must reset the

clock and timer.

•

If the tape indicator is blinking, no tape is loaded.

When you are playing DVD at programmed

Recording time, the DVD+VCR automatically

change to VCR mode and start recording.

•

The DVD+VCR will automatically power off when

Timer Recording ends.

Download from Www.Somanuals.com. All Manuals Search And Download.

Extending the Recording Time

Instant Timer Recording

The recording time can be extended anytime by

pressing REC/ITR (z). Subsequent presses result in

advancing the recording time by 30-minute

increments.

With this feature you can record for a preset length

without using the program timer.

1. Turn on DVD+VCR and the TV.

2. Be sure the TV is tuned to the DVD+VCR output

channel (CH 3 or 4). If a direct VIDEO/AUDIO

connection is made between the DVD+VCR and

the TV, set the TV’s source selector to VIDEO.

Note:

If you press PAUSE/STEP (X) during instant timer record-

ing, the instant timer recording is cancelled.

3. Insert a video cassette with the safety tab intact.

Recording from External

Components

4. Select the desired channel using CH/TRK (v/V)

or the number buttons (0-9). The channel number

appears on the TV screen. If you are recording

from another source via audio/video input jacks

(at the rear or front panel), select LINE1 (rear

jacks) or LINE2 (front jacks) by using INPUT.

You can record from an external component, such as

a camcorder or VCR, connected to any of the

DVD+VCR’s external inputs.

5. Set the desired recording speed (SP or SLP)

using SPEED. The tape speed appears on the TV

screen.

1. Make sure that the component you want to record

from is connected properly to the DVD+VCR. See

page 12.

6. Press REC/ITR (z) twice. The menu appears on

2. Press INPUT repeatedly to select the external

the TV screen, recording starts, and the

input to record from.

(TIMER) indicator lights.

•

LINE1 (L1): Audio/Video Input mounted on

back panel.

INSTANT TIMER RECORD

LINE2 (L2): Audio/Video Input mounted on

CHANNEL

SPEED

front panel.

3. Load a recordable tape.

START

LENGTH

NOW

0H30M

4. Set a recording mode (SP or SLP) as necessary

by pressing SPEED repeatedly.

5. Play the tape or disc in the external component. If

you have a TV attached to your DVD+VCR, you

can see the video palying.

7. Press REC/ITR (z) repeatedly to select the

recording time length. Each time you press this

button the recording time increases 30 minutes

(up to 9 hours). At the end of the recording, the

DVD+VCR will stop recording and shut off.

6. Press REC/ITR (z) once to start recording.

The REC indicator lights in the display window.

7. Press STOP (x) to stop recording.

If you set the time to 0H00M, the DVD+VCR goes

into the normal recording mode. Press STOP (x)

to stop the recording.

Notes:

•

Before recording, confirm the recording start posi-

tion.

Note:

•

If your source is copy-protected using

CopyGuard, you will not be able to record it using

this unit. See Copyright on page 6 for more

details.

During Instant Timer Recording, you cannot change the

channel on the DVD+VCR.

Checking the Recording Time

•

To record for a fixed length of time, see Instant

Timer Recording.

Press REC/ITR (z) once to check the recording time.

The recalled setting automatically returns to the TV

screen after 6 seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Each press of the ENTER/OK changes the TV screen

in the following sequence.

Copying from DVD to VCR

You can copy the contents of a DVD to a VHS tape.

STOP

STEREO

1. Insert the disc you wish to copy into the DVD

deck and close the disc tray.

APR 30 , SAT

2:15 PM

2. Insert a blank VHS video tape into the VCR deck.

2:15 PM

0:35:40

3. Find the place on the DVD from which you want

to start dubbing using the PLAY, FF, REW and

PAUSE functions.

REM 1:58

For best results, pause playback at the point from

which you want to record.

Real-Time Counter

If a tape with contents recorded on it is inserted into

the VCR, the real-time counter shows length of the

tape running in hours, minutes, and seconds. Press

CLK/CNT to select the real-time counter display.

Every press of CLK/CNT changes the TV screen as

illustrated below.

4. Press the z REC/ITR. The DVD goes into PLAY

mode and the VCR goes into RECORD mode. If

the DVD disc menu appears, you may need to

press PLAY (N) manually to begin copying.

5. When the DVD is finished playing, press STOP (x)

to end copying.

2:15 AM

CLOCK

0:05:25

COUNTER

REM 1:07

REMAINING TIME

Notes:

•

If the DVD you are attempting to copy is copy protected,

you will not be able to copy the disc. It is not permitted

to copy Macrovision encoded DVDs (or Discs). “Lock” is

displayed in the display window.

Counter Memory

This feature is useful if there is a section of tape you

want to view immediately after recording or if you

want to return to the same point several times.

•

You must stop the copy process manually when the

DVD movie ends, or the unit may replay and record over

and over again.

1. Begin recording or playing a tape.

2. Press CLK/CNT until the real-time counter is dis-

played on the TV screen.

When you stop the DVD playback during copying, the

recording on VCR is stopped automatically.

3. At the point that you want to locate later, reset the

real-time counter to “0:00:00” by pressing CLEAR.

4. Continue to play or record.

5. Press STOP (x) when recording or playback fin-

ishes.

On-Screen Display - VCR

Some of these functions will be displayed every time

the DVD+VCR is operated.

6. Press BACKWARD (m). The tape automatically

stops when the tape counter returns to about

“0:00:00”.

Tape Remaining

❶

❷

❸

❹

❺

This function displays the amount of time remaining

on the tape during recording or playback. Press

CLK/CNT repeatedly until the REM indicator displays

on the TV screen during recording or playback.

The remaining tape length may not be displayed cor-

rectly depending on the condition of the tape and the

kind of the tape (T-140, T-160, or T-210 etc.).

PLAY

HI-FI

CH 4

STEREO

OCT 8 , SAT

2:15 PM

Notes:

❻

❼

•

The function displays can be seen displayed on the TV

screen for 5 seconds.

❶ TAPE SPEED DISPLAY

❷ FUNCTION DISPLAY

❸ HI-FI DISPLAY

❺ STEREO/SAP DISPLAY

(MONO is not displayed)

The clock (or tape counter, tape remaining) mode will be

❻ DATE DISPLAY

displayed until you press ENTER/OK.

The tape counter and the remaining tape length indica-

tor appear only when a cassette is inserted. Also, the

remaining tape length indicator appears after any tape

operation.

❼ CLOCK/ COUNT/

REMAIN DISPLAY

❹ CHANNEL DISPLAY

Download from Www.Somanuals.com. All Manuals Search And Download.

S-VHS Quasi Playback (SQPB)

Additional VCR Information

•

During manual recording, timer recording, Instant

Timer Recording, playback, or fast forward

modes, the DVD+VCR automatically starts

rewinding the tape at the end of the tape. The

cassette stops at the beginning of the tape and is

ejected.

•

This DVD+VCR can play back S-VHS recorded

tapes, however, it cannot make recordings using

S-VHS format tapes.

SQPB is an abbreviation for S-VHS Quasi

Playback.

After you have finished using the DVD+VCR,

rewind, eject, and remove the cassette. Place the

cassette in its protective sleeve to protect it from

dust. It is not necessary to rewind the cassette

before removing it, but if you do, it is ready to play

or record the next time you use it.

Easy Information

If the Extended Data Service (XDS) signals are pro-

vided along with normal TV signal in your area or dur-

ing playback of a tape recorded with Extended Data

Service (XDS) signals, the station ID, program title,

and program details are shown on the TV screen.

When viewing a channel with Extended Data Service

(XDS) signals, press ENTER/OK and the station ID

will appear on the TV screen. Press ENTER/OK again

and the program details will appear on the TV screen.

When viewing a tape recorded with Extended Data

Service (XDS) signals, press ENTER/OK twice and

the program title and program details will appear on

the TV screen.

Be sure the DVD+VCR channel selector is on the

correct channel you wish to record. The channel

that is being recorded can always be checked by

setting the television on the DVD+VCR channel

(CH 3 or 4) and pressing the TV/VCR to turn the

DVD+VCR’s TV indicator off.

Do not attempt to hook up more than one televi-

sion set to the DVD+VCR for either recording or

playback.

Program Details

LENGTH: Indicates the run length of a program.

TIME REMAINING: Indicates the remaining time of a

program.

VCR Auto Play System

RATING: Indicates the rating of the current program

(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The

rating N/A means that the motion picture ratings are not

applicable to this program.

This DVD+VCR features automatic playback.

When you load a tape with the safety tab removed

the following occurs:

WABC

STEREO

•

The Output Source is changed to VCR mode

automatically.

•

The power turns on automatically and playback begins.

“Home video”

APR 30 , SAT

2:15 PM

At the end of the tape, the DVD+VCR stops, then

rewinds.

Easy Information Screen

(Station ID)

•

The tape is ejected after rewinding and the turns itself

off automatically.

PROGRAM DETAILS

“Home video”

LENGTH 01:00

TIME REMAINING 00:26

RATING N/A

Note:

Auto power off does not function during regular DVD play

mode. (DVD+VCR power stays on.)

Easy Information Screen

(Program details)

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations - DVD

Playback Setup

ꢀ Turn the TV on and select the video input source connected to this unit.

ꢀ Audio System: Turn the Audio System on and select the input source connected to this unit.

1. Press OPEN/CLOSE (Z) to open the disc tray.

2. Load your chosen disc in the tray with the playback side down.

3. Press OPEN/CLOSE (Z) to close the tray.

Playback starts automatically. If playback does not start, press PLAY N.

In some cases, the disc menu might appear instead.

Note:

If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be

entered and/or the disc must be authorized (see “Rating”, on page 17).

General features

Buttons

Operations

Discs

Z (OPEN / CLOSE)

X (PAUSE)

Opens or closes the disc tray.

During playback, press X to pause playback.

Press X repeatedly to play Frame-by-Frame.

During playback, press SKIP (. or >) to go to the

next chapter/track or to return to the beginning of the cur-

rent chapter/track.

ALL

DVD

DivX

SKIP (. / >)

ALL

Press SKIP . twice briefly to step back to the previous

chapter/track.

DVD

ACD

DivX

MP3

BACKWORD

During playback, press BACKWARD/FORWARD

/FORWARD(m / M) (m or M) repeatedly to select the required scan speed.

DVD, DivX disc; 4 steps

MP3, Audio CD ; 3 steps

While the playback is paused, press FORWARD M

repeatedly to play in slow motion (4 steps, forward only).

DVD

ALL

DivX

REPEAT

During playback, press REPEAT repeatedly to select a

desired repeat mode.

DVD Video discs: Chapter/Title/Off

Audio CD, DivX/MP3/WMA discs: Track/All/Off

Note:

If you press SKIP (>) once during Repeat Chapter

playback, the repeat playback cancels.

A-B

During playback, each press of A-B button to select point

A and point B and repeats a sequence from point A

(Starting point) to point B (End point).

DVD

DivX

ACD

Note:

The A-B repeat function is available only in the current

track.

Download from Www.Somanuals.com. All Manuals Search And Download.

Buttons

Operations

Discs

ZOOM

During playback or pause mode, press ZOOM to enlarge

the video image (4 steps).

DVD

DIVX

You can move through the zoomed picture using b B v V

buttons. Press CLEAR to exit.

Note:

Zoom may not work on some DVDs.

ACD

DVD

MP3

WMA

RANDOM

TITLE

During playback or in stop mode, press RANDOM for ran-

dom playback.

If the current DVD title has a menu, the title menu appears

on the screen. Otherwise, the disc menu may appears.

DISC MENU

(ANGLE)

The disc menu appears on the screen.

DVD

During playback of DVD disc contains scenes recorded

different camera angles, press ANGLE repeatedly to

select a desired angle.

Tip:

The Camera Angle icon is displayed on the TV screen

when alternate angles are available.

DVD

DivX

(SUBTITLE)

During playback, press SUBTITLE repeatedly to select a

desired subtitle language.

(AUDIO)

During playback, press AUDIO repeatedly to hear a differ-

ent audio language or audio track.

Time Search DVD

DivX

Additional features

To start playing at any chosen time on the disc:

1. Press DISPLAY during playback.

3D Surround

To produce a 3D surround effect that simulates multi-

channel audio from two stereo speakers (instead of

the five+ speakers normally required for multi-channel

audio from a home theater system).

2. Press v / V to select the time clock icon and

“--:--:--” appears.

3. Input the required start time in hours, minutes,

and seconds from left to right. If you enter the

wrong numbers, press CLEAR to remove the

numbers you entered. Then input the correct

numbers.

DVD

DivX

1. Press DISPLAY during playback.

2. Use 3 or 4 to select the sound option.

4. Press ENTER/OK to confirm. Playback starts from

The sound option will be highlighted.

the selected time.

3. Use 1 or 2 to select “3D SUR”.

To turn off the 3D Surround effect, select

“Normal”.

ACD

1. Press AUDIO during playback.

“3D SUR” appears on the menu screen.

2. To return to normal playback, press AUDIO

repeatedly until “3D SUR” disappears from the

menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Marker Search DVD

To enter a Marker

DivX

You can start playback from up to nine memorized

points. To enter a marker, press MARKER at the

desired point on the disc. The Marker icon appears

on the TV screen briefly. Repeat to enter up to nine

markers.

To Recall or Clear a Marked Scene

1. During disc playback, press SEARCH. The mark-

er search menu appears on the screen.

2. Within 10 seconds, press b / B to select a marker

number that you want to recall or clear.

3. Press ENTER/OK and playback starts from the

marked scene. Or, Press CLEAR and the marker

number is erased from the list.

4. You can play any marker by inputting its number

on the marker search menu.

Last Scene Memory DVD

ACD

This player memorizes last scene from the last disc

that is viewed. The last scene remains in memory

even if you remove the disc from the player or switch

off the player. If you load a disc that has the scene

memorized, the scene is automatically recalled.

Note:

This player does not memorize the scene of a disc if

you switch off the player before commencing to play

the disc.

Screen Saver

The screen saver appears when you leave the

DVD+VCR in Stop mode for about five minutes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing an Audio CD or

MP3/WMA file

Programmed Playback

The program function enables you to store your

favorite tracks from any disc in the player memory.

A program can contain 30 tracks.

This unit can play Audio CDs or MP3/WMA files

recorded media.

1. Insert an Audio CD or MP3/WMA files recorded

media. AUDIO CD or MUSIC menu appears.

MP3/ WMA/ Audio CD

Once you insert an MP3/WMA files recorded media

or Audio CD, a menu appears on the TV screen.

Press v / V to select a track/file then press PLAY or

ENTER/OK and playback starts. You can use variable

playback functions. Refer to page 26-28.

2. During STOP mode, press PROGRAM and

the

mark will appear

Note:

Press PROGRAM again to exit the program edit

mode, then the

mark will disappear.

3. Select a track on the “List”, then press

ENTER/OK to place the selected track on the

“Program” list. Repeat to place additional tracks

on the list.

4. Select the track you want to start playing on the

ID3 TAG

“Program” list.

• When playing a file containing information such as

track titles, you can see the information by pressing

DISPLAY. [ Song, Artist, Album, Comment, Genre ]

5. Press PLAY or ENTER/OK to start. Playback

begins in the order in which you programmed the

tracks. Playback stops after all of the tracks on

the “Program” list have played once.

6. To resume normal playback from programmed

playback, select a track on the list and then press

PLAY.

• If there is no information, “No ID3 TAG” appear on

the menu screen.

Tips:

•

If you are in a file list on the “MUSIC” menu and

Repeat Programmed Tracks

want to return to the Folder list, use the v / V to

Press REPEAT to select a desired repeat mode.

highlight

and press ENTER/OK.

• Track: repeats the current track

• Press DISC MENU to move to the next page.

• All: repeats all the tracks on programmed list.

• Off(No display): does not play repeatedly.

• On a CD with MP3/WMA and JPEG you can switch

MP3/WMA and JPEG. Press TITLE and MUSIC or

PHOTO word on top of the menu is highlighted.

Note:

If you press > once during Repeat Track playback,

the repeat playback cancels.

MP3 / WMA disc compatibility with this player is

limited as follows:

Erasing a Track from “Program” List

1. During STOP mode, press PROGRAM and

• Sampling frequency: within 8 - 48 kHz (MP3),

within 32 - 48kHz (WMA)

the

mark will appear

• Bit rate: within 32 - 320kbps (MP3),

32 - 320kbps (WMA)

2. Use v V b B to select the track that you wish to

erase from the Program list.

• The player cannot read an MP3/WMA file that

has a file extension other than “.mp3” / “.wma”.

• CD-R physical format should be ISO 9660

• If you record MP3 / WMA files using software

that cannot create a file system (eg. Direct-CD)

it is impossible to playback MP3 / WMA files.

We recommend that you use Easy-CD Creator,

which creates an ISO 9660 file system.

• File names should have a maximum of 8 letters

and must incorporate an .mp3 or .wma extension.

• They should not contain special letters such as

/ ? * : “ < > l etc.

3. Press CLEAR. Repeat step 1~3 to erase addition-

al tracks on the list.

Erasing the Complete Program List

1. During STOP mode, press PROGRAM and

the

mark will appear

2. Use v V b B to select “Clear All”, then press

ENTER/OK.

Note:

The programs are also cleared when the power is off

or the disc is removed.

• The total number of files in a folder should be

less than 1190 files.

Download from Www.Somanuals.com. All Manuals Search And Download.

Slide Show JPEG

Viewing a JPEG Disc

Use v V b B to highlight the

(Slide Show) then

Using this DVD+VCR you can view discs with JPEG

files.

press ENTER/OK.

1. Insert a disc and close the tray. The PHOTO

menu appears on the TV screen.

Still Picture JPEG

1. Press PAUSE/STEP (X) during slide show.

The player will now go into PAUSE mode.

2. To return to the slide show, press PLAY (N) or

press PAUSE/STEP (^X) a gain.

Moving to another File JPEG

Press SKIP (> or .) or cursor (b or B) once

while viewing a picture to advance to the next or

previous file.

Zoom JPEG

2. Press v / V to select a folder, and press

ENTER/OK. A list of files in the folder appears.

If you are in a file list and want to return to the

previous Folder list, use the v / V buttons on the

Use zoom to enlarge the photo image. (see page 27)

To rotate picture JPEG

Press v / V during showing a picture to rotate the

remote to highlight

and press ENTER/OK.

picture clockwise or counter clockwise.

3. If you want to view a particular file, press

v / V to highlight a file and press ENTER/OK or

PLAY (N). The selected file will appear for view-

ing.

JPEG disc compatibility with this player is

limited as follows:

While viewing a file, you can press STOP to move

to the previous menu (PHOTO menu).

• Depending upon the size and number of JPEG

files, it could take a long time for the DVD+VCR

to read the disc’s contents. If you don’t see an

on-screen display after several minutes, some of

the files may be too large — reduce the resolution

of the JPEG files to less than 5760 (Horizontal) x

3840 (Vertical) pixels and burn another disc.

Tips:

•

Information and user guidance regarding the current

image is displayed in the lower part of the screen. You

can toggle this bar on and off using RETURN (O).

•

There are three Slide Speed options

>>> (Fast), >> (Normal) and > (Slow)

Use v V b B to highlight the Speed. Then, use b / B to

select the option you want to use then press

ENTER/OK.

• The total number of files in a folder should be

less than 1190 files.

• Some discs may be incompatible due to a differ-

ent recording format or the condition of disc.

•

On a disc with MP3/WMA and JPEG you can switch

MP3/WMA and JPEG. Press TITLE and MUSIC or

PHOTO word on top of the menu is highlighted.

• Ensure that all the selected files have the “.jpg”

extensions when copying into the CD layout.

• If the files have “.jpe” or “.jpeg” extensions,

please rename them as “.jpg” file.

• File names without “.jpg” extension will not be

able to be read by this DVD+VCR. Even though

the files are shown as JPEG image files in

Windows Explorer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a DivX Movie file

Using this DVD+VCR, you can play DivX file.

DivX disc compatibility with this player is

limited as follows:

• Available resolution size of the DivX file is under

1. Insert a DivX file recorded media. The MOVIE

menu appears on the TV screen.

720x576 (W x H) pixel.

• The file name of the DivX subtitle is available by

56 characters.

• If there is impossible code to express in the DivX

file, it may be displayed as “ _ ” mark on the dis-

play.

• If the number of the screen frame is over 30

per 1 second, this unit may not operate nor-

mally.

• If the video and audio structure of recorded

file is not interleaved, either video or audio is

outputted.

2. Press v / V to select a folder, and press ENTER.

A list of files in the folder appears.

• If the file is recorded with GMC, the unit sup-

ports only 1-point of the record level.

3. If you want to view a particular file, press v / V to

highlight a file and press ENTER/OK or PLAY.

You can use variable playback functions. Refer to

page 26-28.

GMC?

GMC is the acronym for Global Motion

Compensation. It is an encoding tool specified in

MPEG4 standard. Some MPEG4 encoders, like

DivX or Xvid, have this option.

4. Press STOP to stop the playback. The Movie

menu appears

There are different levels of GMC encoding, usu-

ally called 1-point, 2-point, or 3-point GMC.

Playable DivX file

Tips:

• If you are in a file list and want to return to the pre-

vious Folder list, use the v / V buttons on the

.avi, .mpg, .mpeg

Playable Subtitle format

remote to highlight

• Press DISC MENU to move to the next page.

• On a CD with MP3/WMA, JPEG and MOVIE file,

you can switch MUSIC, PHOTO and MOVIE menu.

Press TITLE and MUSIC, PHOTO and MOVIE word

on top of the menu is highlighted.

and press ENTER/OK.

SubRip(*.srt/*.txt)

SAMI(*.smi)

SubStation Alpha(*.ssa/*.txt)

MicroDVD(*.sub/*.txt)

SubViewer 1.0(*.sub)

SubViewer 2.0(*.sub/*.txt) /

TMPlayer(*.txt)

• The disc subtitle may not be displayed properly, if a

Playable Codec format

DivX subtitle is downloaded through the internet.

“DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “XVID”,

“MP43”, “3IVX”.

• If the Disc Subtitle setup menu does not have the

DivX subtitile language you are going to play, the

subtitle may not be displayed properly.

Playable Audio format

“Dolby Digital”, “DTS”, “PCM”, “MP3”, “WMA”.

• Sampling frequency: within 8 - 48 kHz (MP3),

within 32 - 48kHz (WMA)

Notice for displaying the DivX subtitle

If the subtitle does not display properly during play-

back, press and hold SUBTITLE about 3 seconds

then press b / B to select another language code until

the subtitle is displayed properly.

• Bit rate: within 8 - 320kbps (MP3),

32 - 320kbps (WMA)

• Not all the WMA Audio format is compatible with

this unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a DVD VR format

Disc

This unit will play DVD-R/RW discs recorded using

the DVD-Video format that have been finalized using

a DVD-recorder.

Maintenance and Service

Refer to the information in this chapter before con-

tacting a service technician.

Handling the Unit

• This unit will play DVD-RW discs recorded using

the Video Recording (VR) format.

When shipping the unit

Please save the original shipping carton and packing

materials. If you need to ship the unit, for maximum

protection, re-pack the unit as it was originally packed

at the factory.

1. Insert a disc and close the tray, It start playing

automatically.

2. The DVD-VR menu appears on the TV screen

when you press DISC MENU buttons while play-

ing.

Keeping the exterior surfaces clean

•

Do not use volatile liquids such as insecticide

spray near the unit.

•

Do not leave rubber or plastic products in contact

with the unit for a long period of time. since they

leave marks on the surface.

Cleaning the unit

To clean the player, use a soft, dry cloth. If the sur-

faces are extremely dirty, use a soft cloth lightly mois-

tened with a mild detergent solution.

3. Press v / V to select a track then press PLAY or

ENTER and playback starts.

Do not use strong solvents such as alcohol, benzine,

or thinner, as these might damage the surface of the

unit.

4. Press DISC MENU to move to the list menu.

Notes:

Maintaining the Unit

• Unfinalized DVD-R/RW discs cannot be played in

this player.

The DVD+VCR is a high-tech, precision device. If the

optical pick-up lens and disc drive parts are dirty or

worn, the picture quality could be diminished.

• Some DVD-VR disc are made with CPRM data by

DVD RECORDER. Player does not support these

kinds of discs.

Depending on the operating environment, regular

inspection and maintenance are recommended after

every 1,000 hours of use.

What is ‘CPRM’?

CPRM is a copy protection system (with scramble

system) only allowing the recording of ‘copy once’

broadcast programs. CPRM stands for Content

Protection for Recordable Media.

For details, please contact your nearest authorized

service center.

This player is CPRM compatible, which means that

you can record copy-once broadcast programs, but

you cannot then make a copy of those recordings.

CPRM recordings can only be made on DVD-RW

discs formatted in VR mode, and CPRM recordings

can only be played on players that are specifically

compatible with CPRM.

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

Language Codes List

Use this list to input your desired language for the following initial settings:

Disc Audio, Disc Subtitle, Disc Menu.

Language

Abkhazian

Afar

Code

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Language

Fiji

Code

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Language

Lingala

Code

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

8185

Language

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Code

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Finnish

Lithuanian

Macedonian

Malagasy

Malay

Afrikaans

Albanian

Ameharic

Arabic

French

Frisian

Galician

Georgian

German

Greek

Malayalam

Maltese

Armenian

Assamese

Aymara

Maori

Greenlandic

Guarani

Gujarati

Hausa

Marathi

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

Tamil

Basque

Tatar

Bengali; Bangla

Bhutani

Hebrew

Hindi

Nepali

Telugu

Thai

Norwegian

Oriya

Bihari

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Tibetan

Tigrinya

Tonga

Breton

Panjabi

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Pashto, Pushto

Persian

Turkish

Turkmen

Twi

Polish

Italian

Portuguese

Quechua

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Ukrainian

Urdu

Chinese

Corsican

Croatian

Czech

Rhaeto-Romance 8277

Rumanian

Russian

8279

8285

8377

8365

7168

8382

8372

8378

8368

Uzbek

Vietnamese

Volapük

Welsh

Samoan

Danish

Sanskrit

Dutch

Korean

Scots Gaelic

Serbian

Wolof

English

Kurdish

Laothian

Latin

Xhosa

Esperanto

Estonian

Faroese

Serbo-Croatian

Shona

Yiddish

Yoruba

Zulu

Latvian, Lettish

Sindhi

Area Codes List

Choose a area code from this list.

Area

Code

Area

Code

Area

Code

Area

Saudi Arabia

Senegal

Code

Afghanistan

Argentina

Australia

Austria

Ethiopia

Malaysia

Maldives

Mexico

Fiji

Finland

France

Germany

Great Britain

Greece

Greenland

Islands

Hong Kong

Hungary

India

Singapore

Slovak Republic

Slovenia

Monaco

Mongolia

Morocco

Nepal

Belgium

Bhutan

South Africa

South Korea

Spain

Bolivia

Brazil

Netherlands

Cambodia

Canada

Chile

Netherlands Antilles AN

Sri Lanka

Sweden

New Zealand

Nigeria

Switzerland

Taiwan

China

Norway

Oman

Colombia

Congo

Indonesia

Israel

Thailand

Pakistan

Panama

Paraguay

Philippines

Poland

Turkey

Costa Rica

Croatia

Italy

Uganda

Jamaica

Japan

Ukraine

Czech Republic

Denmark

Ecuador

Egypt

United States

Uruguay

Kenya

Kuwait

Portugal

Romania

Russian Federation RU

Uzbekistan

Vietnam

Libya

El Salvador

Luxembourg

Zimbabwe

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Cause

Correction

Symptom

No power.

ꢀ The power cord is disconnected.

ꢀ Plug the power cord into the wall out-

let securely.

ꢀ Refer to page 6.

The power is on, but

the DVD+VCR does

not work.

ꢀ DVD or VCR button is not switched

properly.

ꢀ Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

ꢀ No disc is inserted.

ꢀ No tape is inserted.

No picture.

No sound.

ꢀ Select the appropriate video input

mode on the TV so the picture from

the DVD+VCR player appears on the

TV screen.

ꢀ The TV is not set to receive DVD+VCR

signal output.

ꢀ Connect the video cable into the jacks

ꢀ The video cable is not connected

securely.

ꢀ Check the connection.

ꢀ Wrong connection.

ꢀ Select the correct input mode of the

audio receiver so you can listen to the

sound from the DVD+VCR.

ꢀ The equipment connected with the

audio cable is not set to receive

DVD+VCR signal output.

ꢀ Connect the audio cable into the jacks

ꢀ The audio cables are not connected

securely.

ꢀ Turn on the equipment connected with

ꢀ The power of the equipment connected

the audio cable.

with the audio cable is turned off.

ꢀ Set the AUDIO options to the correct

ꢀ The AUDIO options are set to the wrong

position.

ꢀ Clean the disc.

ꢀ The disc is dirty.

The playback picture is

poor.

ꢀ Check tuning, carry out tuning again.

ꢀ Clean video heads.

ꢀ The TV channels are not tuned in properly.

ꢀ Tape heads are dirty.

ꢀ Use CH/TRK (v/V) for manual track-

ꢀ Tape is a rental or was recorded on

ing adjustment while tape is playing.

another VCR.

ꢀ Make sure that your TV can support

525p Progressive scan picture or set

Progressive scan to off.

ꢀ This unit can only output 525p

Progressive scan picture.

The “PROGRESSIVE

SCAN MODE”

ꢀ Keep pressing the STOP button for

ꢀ DVD+VCR was turned off while setting

more than 5 seconds.

the Progressive scan mode.

message remains to be

displayed.

ꢀ The Progressive Scan is set to “On” on

the setup menu but is connected to a

standard(analog) television with compo-

nent video input.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cause

Correction

Symptom

ꢀ An unplayable disc is inserted.

ꢀ Insert a playable disc. (Check the disc

The DVD+VCR does

not start playback.

type and Regional code.)

ꢀ Place the disc with the playback side

ꢀ The disc is placed upside down.

down.

ꢀ Place the disc on the disc tray correctly

ꢀ The disc is not placed within the

inside the guide.

guide.

ꢀ Clean the disc.

ꢀ The disc is dirty.

ꢀ Cancel the Rating function or change

ꢀ The Rating level is set.

the rating level.

ꢀ Eject the tape in.

ꢀ Is the cassette compartment empty?

Video tape cannot be

inserted.

ꢀ Audio mode is not set properly.

No Hi-Fi sound

ꢀ Select STEREO by repeatedly pressing

AUDIO on the remote control.

ꢀ Remove the obstacle.

The remote control

ꢀ There is an obstacle in the path of the

does not work properly.

remote control and this unit.

ꢀ Replace the batteries with new ones.

ꢀ The batteries in the remote control are

exhausted.

ꢀ Point the remote control at the remote

ꢀ The remote control is not pointed at

sensor of the DVD+VCR.

the remote sensor of the DVD+VCR.

ꢀ Operate the remote control within 23ft

ꢀ The remote control is too far from the

(7m).

DVD+VCR.

ꢀ When using a VCR, first press the VCR

button. When using a DVD, first press

the DVD button.

ꢀ This remote control use the same

buttons for VCR and DVD functions

(ex.PLAY).

ꢀ Turn camcorder on and operate

Camcorder image is

not shown.

ꢀ Camcorder is off.

properly.

ꢀ Press INPUT to select LINE input

Camcorder image via

AV input to DVD+VCR

is not shown on TV

screen.

ꢀ DVD+VCR SOURCE SELECT is not

channel (LINE1 or LINE2).

set to LINE1 or LINE2.

Timer recording is not

possible.

ꢀ Set clock to correct time.

ꢀ Clock in DVD+VCR is not set to

correct time.

ꢀ Timer has been programmed

ꢀ Reprogram Timer.

incorrectly.

ꢀ Reprogram Timer and turn DVD+VCR

ꢀ

indicator light does not appear after

programming timer.

off to enable timer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

General

Power requirements

120V, 60 Hz

Power consumption

Dimensions (approx.)

Weight (approx.)

16 W

16.9" X 3.1" X 10.4" (430 X 78.5 X 265 mm) (w x h x d)

9.24 lbs (4.2 kg)

5˚C to 40˚C (41˚F to 104˚F)

5 % to 90 %

Operating temperature

Operating humidity

Signal system

NTSC

Inputs

ANTENNA IN

VHS VIDEO IN(LINE1, 2)

VHS AUDIO IN(LINE1, 2)

75 ohms (VHF/UHF/CATV)

1 V (p-p) 75 ohms, sync negative, RCA jack x 2

-6.0 dBm more than 47 ohms, RCA jack (L, R) x 2

Outputs

VIDEO OUT

1 V (p-p) 75 ohms, sync negative

S-VIDEO OUT

(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1

COMPONENT VIDEO OUT

(PROGRESSIVE SCAN)

Audio output (digital audio)

Audio output (analog audio)

RF OUT

(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1

(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2

0.5 V (p-p), 75 ohms, RCA jack x 1

2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 1

Channel 3 or 4 (Adjustable)

VCR Specifications

Head system

Timer

Four head helical scan azimuth system

12-hour display type with AM, PM

SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec

12.7 mm

Tape speed

Tape width

Maximum recording time

Rewind time

SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)

About 3 minutes (T-120)

Channel coverage

Frequency range

Signal-to-noise ratio

Dynamic range

VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)

20 Hz to 20 kHz

More than 43 dB

More than 88 dB

Channel separation

More than 60 dB

DVD Specifications

Laser system

Semiconductor laser, wavelength 650 nm

DVD (PCM 96 kHz): 8 Hz to 44 kHz,

DVD (PCM 48 kHz): 8 Hz to 22 kHz

CD: 8 Hz to 20 kHz

Frequency response

Signal-to-noise ratio

Harmonic distortion

Dynamic range

More than 100 dB (ANALOG OUT jacks only)

Less than 0.008%

More than 95 dB (DVD/CD)

Accessories:

Video cable x 1, Audio cable (L/R) x 1, RF 75-ohm Coaxial Cable x 1, Remote control x 1, Batteries (R03/AAA) x 2

• Design and specifications are subject to change without prior notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

ZENITH

LIMITED WARRANTY-USA

Zenith will repair or replace your product, at Zenith’s option, if it proves to be defective in material or workmanship

under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of

Installation”) of original consumer purchase of the product. This warranty is good only to the original purchaser of

the product and effective only when used in the United States, excluding U.S. Territories.

WARRANTY PERIOD:

HOW SERVICE IS HANDLED:

This is an Exchange Product. Call 1-800-243-0000 for

LABOR: 90 DAYS from the Date of Purchase.

PARTS: ONE YEAR from the Date of Purchase.

instructions on getting the defective unit replaced.

Please retain dated sales receipt and your box to

return the unit to LG for repair or replacement.

Replacement Units is warranted for the remaining

period of the original warranty.

Shipping charges both ways will be paid by Zenith during

the first 90 days of the Warranty Period. During the

remainder of the Warranty Period (91-365 days), you pay

in-bound shipping charges and Zenith pays return ship-

ping charges.

Visit our website at http://www.zenithservice.com

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT

LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE

EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS

WARRANTY PERIOD ABOVE. ZENITH WILL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, OR

INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS, IN CONNECTION WITH

THE PRODUCT. SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY

LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITA-

TIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

THIS LIMITED WARRANTY DOES NOT APPLY TO:

• Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,

maintenance or failure to maintain, or separate system components; and

• Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside envi-

ronmental specifications or contrary to the requirements or precautions in the Operating Guide, accident, light-

ning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or volt-

age, signal reception or input, software not licensed directly by LG, software errors that do not disable function-

ality, operating and software protocols adopted after the date of manufacture or for outside the US, institutional

or commercial use, or other causes not arising out of defect in material or workmanship.

The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.

CUSTOMER INTER-ACTIVE CENTER NUMBERS:

Call 1-800-243-0000 (24 hours a day, 365 days per year) and select an

appropriate option from the menu.

Or visit our website at http://www.zenithservice.com

For Warranty Service, Where to buy,

Product Assistance, or Customer

Assistance

To contact us by mail:

LG Customer Interactive Center, PO Box 240007

201 James Record Road, Huntsville, AL 35824

Attn: CIC

FOR WARRANTY SERVICE:

You must call 1-800-243-0000 (24 hours a day, 365 days per year) and select an appropriate option from the menu

to confirm the product is defective and to obtain a Return Authorization (RA). If the defect has occurred during the

first 90 days of the Warranty Period, Zenith will send you a return-shipping label. After you obtain an RA for return,

please box your unit with a legible copy of the sales receipt and enough packing material to ensure undamaged

delivery of your product. When you receive the label, place it on the box and call the 800# in the instructions for

pick-up. When your unit is received, Zenith will repair or replace your unit in accordance with this Limited Warranty.

ADVANCE SHIPMENT. If a replacement unit is available and you want second day delivery, our service representa-

tive will ask for your credit card number. Zenith requires a reserved deposit by credit card as surety for such

advance shipment. Your credit card will not be charged if you return the defective unit in 10 business days. For

advance shipment, the return label will come with the replacement unit sent to you. Please follow boxing and ship-

ping instructions above.

Marketed and distributed by:

LG ELECTRONICS U.S.A., INC.

1000 SYLVAN AVENUE

GS# 3835RV00???

Printed in Indonesia

Issue O

ENGLEWOOD CLIFFS, NJ

Download from Www.Somanuals.com. All Manuals Search And Download.

LaCie Network Card 400USB User Manual
Lincoln Electric Welding System IM318 B User Manual
Lochinvar Water Heater MFH Iamp;S 02 User Manual
Loewe Flat Panel Television A 37 Full HD+ 100 User Manual
Magnavox Pet Fence FW58 User Manual
Magnavox TV DVD Combo 32MD359B User Manual
Makita Power Screwdriver BFL300F User Manual
Melissa Vacuum Cleaner 640 110 User Manual
Memorex VCR MVR2040 A User Manual
Mercedes Benz Automobile GLX350 User Manual