OWNER’S MANUAL
MANUAL DE INSTRUCCIONES
VIDEO CASSETTE RECORDER
VIDEOGRABADOR DE CASSETTE
MVR2040A
ATTENTION
ATENCION
For your protection in the event of theft or loss of this product, please fill in the
information listed below which is for your own personal records.
Por su precaucion en caso de robo o pérdida de este producto, favor de llenar
la información listada baja que es para sus inscripciones personales de usted.
Date of purchase
Fecha de compra
Serial No.
:
:
:
:
Número de serie
Place od Purchase :
Lugar de compra
:
TV/CATV MODE SELECTION
SELECCION DE MODO DE TV/CATV
When shipped from the factory, the TV/CATV menu option is set to the "CATV"
(Cable Television) mode.
If not using CATV (Cable TV), set this menu option to the "TV" mode.
A la salida de fábrica, la opción de menú TV/CATV está en el modo "CATV"
(televisión por cable).
Si no se va a utilizar el CATV (TV cable), cambie la opción de este menú al
modo TV.
Before operating the unit, please read this manual thoroughly.
Antes de usar la unidad, lea detenidadmente este manual del usuario.
4C80401A-E(C-09)
1
25/2/99, 21:22
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
6. ATTACHMENTS
Do not use attachments not recommended by the unit's manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool.
PORTABLE CART WARNING
8. ACCESSORIES
(symbol provided by RETAC)
Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may
fall, causing serious injury, and serious damage to the unit. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer.
8A. An appliance and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and cart combination to overturn.
9. VENTILATION
S3126A
Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable
operation of the unit and to protect it from overheating. These openings must not be blocked or covered. The
openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit
should never be placed near or over a radiator or heat source. This unit should not be placed in built-in installa-
tions such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have
been adhered to.
10. POWER SOURCES
This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company. For units
intended to operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug If your unit is equipped with a
3-wire grounding-type plug, a plug having a third (grounding) pin, this plug will only fit into a grounding-type
power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.
3
4C80401A-E(C-09)
3
25/2/99, 21:22
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
(CONTINUED)
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
13. LIGHTNING
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit
due to lightning and power line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be
fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and support-
ing structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location
of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
a.
When the power-supply cord or plug is damaged.
b.
If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d.
If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
unit to its normal operation.
e.
f.
If the unit has been dropped or the cabinet has been damaged.
When the unit exhibits a distinct change in performance, this indicates a need for service.
20. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock or other hazards.
4
4C80401A-E(C-09)
4
25/2/99, 21:22
Download from Www.Somanuals.com. All Manuals Search And Download.
21. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
22. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
23. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC-NATIONAL ELECTRICAL CODE
S2898A
5
4C80401A-E(C-09)
5
25/2/99, 21:22
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
High Quality Picture Technology - This video cassette recorder marked "HQ" incorporates VHS high quality
technology. A built-in detail enhancer is used to boost the recorded signal and provide maximum picture quality in
playback. It is compatible with other VHS video cassette recorders.
Frequency Synthesized Tuning - Quartz locked direct access tuner automatically locks in each channel for perfect
reception.
Full Load Tape Transport - Permits rapid access between modes.
4 Video Head - Provides optimal picture quality for special effects playback.
8-Program/1-Month Programmable Timer with Everyday/Every Week Capability - The built-in timer allows
automatic absentee recording of up to 8 TV programs within 1month. It is also possible to record a program which is
broadcast at the same time everyday or every week.
On-Screen Display and Programming - When you select a channel or make other changes, the TV will show an
indicator on the screen for a few seconds. Clock settings, timer setting and other set-up operations can be carried
out using the on-screen display menu system.
Digital Auto Tracking - Automatically adjusts tracking during playback for the best possible picture.
181 Channel Tuner - Receives standard VHF and UHF broadcast channels and up to 113 cable channels.
One-Touch Timer Recording (OTR) - Simply by pressing the REC/OTR button, the VCR can be programmed for up
to 5 hours of recording with an immediate start.
Automatic Power On - When loading a cassette tape, this VCR will automatically turn on.
Automatic Playback - When loading a cassette tape without the erase prevention tab, this VCR will automatically
turn on and play back the cassette tape at the correct speed.
Automatic Rewind-Stop-Eject-Power Off - When a tape reaches its end during playback and recording, it will
automatically stop, rewind, stop, eject the tape and the VCR will turn off.
Automatic Repeat Play System - When the AUTO REPEAT option is turned on, this VCR will automatically play
back the same cassette tape repeatedly.
On-Screen 3 Language Display - You can select one of 3 languages; English, Spanish or French, for on-screen
programming.
Frame by Frame Advance - Press the SLOW button during still playback to advance the tape one frame at a time.
Slow Motion - This VCR provide slow motion which offers steady, noise-free playback at 1/10 normal speed.
Real Time Tape Counter - The counter displays on the screen the elapsed time in hours, minutes and seconds and
can be used to locate programs.
Channel Skip - An unwanted channel can be deleted when using the CHANNEL ▲ or ▼ button.
Fluorescent Multi-Function Display - Selected functions are immediately indicated on the diaplay.
2 Speed Picture Search - 3 or 5 times normal speed in SP mode (7X or 9X in LP and 9X or 15X in SLP).
3 Speed Record/Playback - Records and plays three tape speeds (SP, LP, SLP).
Skip Search - When the SKIP SEARCH button on the remote control is pressed during playback, the VCR will
automatically search forward through approximately 60 seconds of tape, and then return to normal playback.
Auto head Cleaning System - Cleans the video heads automatically when a cassette tape is loaded and ejected.
6
4C80401A-E(C-09)
6
25/2/99, 21:22
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
We recommend that you carefully read the descriptions and operating procedures contained in this Owner's
Manual prior to operating your new VCR.
PRECAUTIONS
PRECAUTIONS ....................................................................................................................................................... 8
LOCATION OF CONTROLS .................................................................................................................................. 10
REMOTE CONTROL ............................................................................................................................................. 12
BASIC CONNECTIONS......................................................................................................................................... 14
CATV (CABLE TV) CONNECTIONS ..................................................................................................................... 18
AUDIO/VIDEO CONNECTIONS ............................................................................................................................ 22
SETTING THE VIDEO CHANNEL ......................................................................................................................... 23
ON-SCREEN LANGUAGE SELECTION ............................................................................................................... 24
SETTING THE CLOCK .......................................................................................................................................... 25
SETTING THE CHANNELS ................................................................................................................................... 26
NOISE ELIMINATION (BLUE SCREEN) ............................................................................................................... 29
PLAYBACK
LOADING AND UNLOADING VIDEO CASSETTE TAPES ......................................................................................30
PLAYBACK ............................................................................................................................................................ 31
SPECIAL PLAYBACK ............................................................................................................................................ 33
RECORDING
RECORDING A TV PROGRAM............................................................................................................................. 35
SETTING THE TIMER RECORDING .................................................................................................................... 38
ONE TOUCH TIMER RECORDING (OTR) ........................................................................................................... 41
ADDITIONAL INFORMATION
ON-SCREEN FUNCTION DISPLAY ...................................................................................................................... 42
DUPLICATING A VIDEO TAPE ............................................................................................................................. 43
VIDEO GLOSSARY ............................................................................................................................................... 44
BEFORE REQUESTING SERVICE ....................................................................................................................... 46
VIDEO HEAD CLEANING...................................................................................................................................... 48
SPECIFICATIONS ................................................................................................................................................. 49
7
4C80401A-E(C-09)
7
25/2/99, 21:22
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
MOISTURE CONDENSATION
DO NOT OPERATE THIS VCR FOR AT LEAST TWO OR THREE HOURS WHEN MOISTURE IN THE AIR
CONDENSES ON THE VCR.
WHAT IS MOISTURE CONDENSATION?
When a cold liquid is poured into a glass, for example, water vapor in the air will condense on the surface of the
glass. This is called moisture condensation.
MOISTURE WILL CONDENSE ON THE UNIT IN THE FOLLOWING CASES;
• When you move this VCR from a cold to a warm place.
• After heating a cold room or under extremely humid conditions.
WHEN YOU EXPERIENCE THE ABOVE CONDITIONS,
Plug the power cord into an AC outlet, set the power switch to ON and leave the unit at room temperature until
moisture condensation disappears.
Depending on the surrounding conditions, this may take two or three hours.
Head Drum
Video Tape
Avoid extreme heat.
If you cause a static discharge when touching the
VCR, and the VCR fails to function, simply unplug the
unit from the wall outlet, wait a few minutes and plug
it back in. The VCR should return to normal operation.
104°F
(40°C)
Do not place the VCR on or near appliances which
may cause electromagnetic interference, e.g. TV,
speakers, etc. Doing so may cause erratic operation
of the VCR including picture and/or sound distortion
or noise.
Avoid extreme cold.
(5°C)
41°F
8
4C80401A-E(C-09)
8
25/2/99, 21:23
Download from Www.Somanuals.com. All Manuals Search And Download.
The ventilation holes prevent overheating. Do not
block or cover these holes. Especially avoid covering
the holes with soft materials such as cloth or paper.
Avoid extreme moisture and dust.
Avoid places subject to strong vibration. Use in a
horizontal (flat) position only.
Do not insert fingers or any other objects into the
cassette loading slot. Do not spray cleaner or wax
directly on the VCR or use forced air to remove dust.
Keep the VCR away from flower vases, sinks, etc. If
liquids should be spilled into the VCR, serious
damage will result. If you spill any liquids into the
VCR, unplug the AC power cord immediately and
consult qualified service personnel before attempting
to use the VC
When you finish operating the VCR, always unload
the cassette and turn off the power.
When you leave your home for a long time, unplug
the AC power cord.
To protect the VCR from a lightning storm, unplug
the AC power cord from the wall outlet and
disconnect the antenna.
POWER SOURCE
If the polarized AC cord does not fit into a
non-polarized AC outlet, do not attempt to
file or cut the blade. It is the user's
responsibility to have an electrician replace
the obsolete outlet.
AC Outlet
AC Plug
9
4C80401A-E(C-09)
9
25/2/99, 21:23
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
FRONT
1
2
3
4
5
POWER
PLAY
STOP/EJECT
REC/OTR
CHANNEL
VIDEDO
IN
AUDIO
10
9
8
7
6
DESCRIPTION OF CONTROLS
1. Cassette Loading Slot - To insert or remove a
7.
STOP/EJECT button - Press once to stop the tape
in any mode. Press again (on the VCR) to eject the
tape.
video tape.
2.
(Rewind) button - In the STOP mode, this
button rapidly winds the tape backwards. In the
PLAY mode, this button activates Reverse Search.
8.
9.
CHANNEL ▲ / ▼ buttons - Used to select a
channel for viewing or recording.
3. PLAY button - Press to play a prerecorded tape.
Remote Sensor - Signals from the Remote
Control are received here.
4.
(Fast Forward) button - In the STOP mode,
this button rapidly winds the tape forward. In the
PLAY mode, this button activates Forward Search.
10.
AUDIO/VIDEO IN jacks - Audio and video signal
cables from an external source can be connected
here.
5. POWER button - Turns the VCR power on and off.
6. REC/OTR button - Press once to start normal
recording. Additional presses activate One Touch
Recording.
10
4C80401A-E(P10-19)
10
25/2/99, 21:24
Download from Www.Somanuals.com. All Manuals Search And Download.
FLUORESCENT DISPLAY
One Touch Timer
Power Indicator
Recording
VCR
OTR
SLP
Timer Record
Tape Speed
VCR
ATR
APM
ATR (Auto Tracking)
AM/PM
Multi-Function Display
LOCATION OF CONNECTORS
1
2
3
REAR
UHF/VHF
IN(ANT)
OUT IN
VIDEO
AUDIO
OUT(TV)
3CH 4CH
5
4
6
DESCRIPTION OF CONTROLS
AUDIO/VIDEO OUT Jacks - Used to output audio
and video signals to a TV, amplifier or VCR.
1.
2.
3.
4. VHF/UHF OUT (TV) Jack - Used to output VHF/UHF
or CATV signals to a TV.
AUDIO/VIDEO IN Jacks - Audio and video signal
cables from an external source can be connected hear
5. 3/4 Channel Selector Switch - Selects the channel
through which the VCR outputs its signal to a TV.
VHF/UHF IN (ANT) Jack - Connect a VHF/UHF
6. AC Power Cord - Connect to a 120V 60Hz outlet.
antenna or CATV cable to this jack.
11
4C80401A-E(P10-19)
11
25/2/99, 21:24
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
1
2
14
POWER
EJECT
CHANNEL
1
4
2
5
8
0
3
6
9
+
15
16
17
–
7
3
4
CALL
TV/VCR
INPUT SELECT
REC/OTR
REW
COUNTER RESET
PAUSE/STILL
F.FWD
SLOW
PLAY
5
6
18
19
7
8
SPEED
MENU
ENTER
STOP
SET
20
21
–
–
+
+
CANCEL
9
10
11
12
13
TIMER REC
AUTO
TRACKING
SKIP
CLOCK/
SEARCH COUNTER
22
23
24
DESCRIPTION OF BUTTONS
1. POWER button - Turns the VCR power on and off.
2. Direct Channel Selection buttons (0-9) - Allow direct
access to any channel.
14. EJECT button - Press to eject the tape.
15. CHANNEL ▲ / ▼ buttons - Used to select a channel
for viewing or recording.
3. CALL button - Displays the present time/day of the week, 16. TV/VCR selector button - Switches between TV
channel, counter, speed selection and VCR mode on
the TV screen.
4. INPUT SELECT button - Switches the program for
and VCR.
17. COUNTER RESET button - Resets the Real Time
Counter to 00:00:00.
viewing between the VCR and an external input source. 18. PAUSE/STILL button - During recording, this button
5. SLOW button - Press to play back a tape in slow
motion or to advance the tape one frame at a time
during still playback.
temporarily stops the tape. The " " will appear on the
screen. During playback, it stops the tape and displays
a still image on the TV screen.
6. REC/OTR button - Press once to start normal recording. 19. F. FWD button - In the STOP mode, this button rapidly
Additional presses activate One-touch Timer Recording
7. PLAY button - Press to play a prerecorded tape.
8. REW button - In the STOP mode, this button rapidly
winds the tape backwards. In the PLAY mode, this button
activates Reverse Search.
9. STOP button - Press once to stop the tape.
10. SPEED (SP/LP/SLP) selector button - Sets the tape
speed for recording.
winds the tape forward. In the PLAY mode, this button
activates Forward Search.
20. ENTER button - Used to enter information for timer
recording, auto repeat, language and clock setting.
21. CANCEL button - Used to clear the selected timer
recording program.
22. TIMER REC button - Used to set the VCR to start
recording at a preset time.
11. MENU button - Press to display the on-screen menu
function.
23. CLOCK/COUNTER selector button - Switches
beyween the clock and the Real time tape counter.
12. SET +/– buttons - Used to set the clock, timer recording, 24. SKIP SEARCH button - Press in playback mode to search
auto repeat, language and noise mute.
13. AUTO/Manual TRACKING buttons - Allow automatic
or manual adjustment of tracking to minimize picture
noise during playback.
forward trough approximately 60 seconds of tape.
12
4C80401A-E(P10-19)
12
25/2/99, 21:24
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY INSTALLATION
Open the battery compart-
ment cover.
Install two "AAA" (penlight
size) batteries.
Replace the cover.
1
2
3
BATTERY CAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh
ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow
battery manufacturer's directions.)
EFFECTIVE DISTANCE OF THE REMOTE CONTROL
15 FEET
30° 30°
NOTES: When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the
•
Remote Sensor, the remote operation may be unstable.
When there is an obstacle between the VCR and the remote control, the remote control may not operate.
•
13
4C80401A-E(P10-19)
13
25/2/99, 21:24
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC CONNECTIONS
If you are using an antenna system, follow the instructions on pages 14-17. If you are a cable (CATV) subscriber,
skip ahead to page 18 for the proper connections.
ANTENNA TO VCR CONNECTION
The VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV and connect
it to the VCR. Then connect the VCR to the TV. Below are 3 common methods of connecting an antenna system to a
VCR. Find the type of antenna system you are using and follow the connection diagram. After you have connected the
antenna to the VCR, follow the instructions on pages 16-17 to connect the VCR to the TV.
COMBINATION VHF/UHF ANTENNA WITH 75 OHM COAXIAL CABLE
1
75 OHM COAXIAL CABLE
COMBINATION VHF/UHF ANTENNA WITH 300 OHM TWIN LEAD (FLAT) WIRE
2
300 OHM TWIN LEAD (FLAT) WIRE
SEPARATE VHF AND UHF ANTENNAS
3
UHF
VHF
300 OHM TWIN LEAD (FLAT) WIRE
75 OHM COAXIAL CABLE
If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300 ohm
inputs and one 75 ohm output.
NOTE:
NOTES: A clear picture will not be obtained by the VCR unless the antenna signal is good. Connect the antenna to
•
the VCR properly.
For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an
outdoor type antenna is required.
If you are not sure about the connection, please refer to qualified service personnel.
•
•
14
4C80401A-E(P10-19)
14
25/2/99, 21:24
Download from Www.Somanuals.com. All Manuals Search And Download.
This VCR has a single 75 ohm antenna input for connection to an antenna (VHF/UHF) or cable (CATV) system.
If you have separate VHF and UHF antennas (number 3 below), use a combiner to connect the antennas to the VCR.
VCR
NOTE: If a VHF or UHF antenna is
used, set the TV/CATV
MENU option to "TV"
IN
mode.
OUT
VCR
NOTE: If a VHF or UHF antenna is
used, set the TV/CATV
MENU option to "TV"
mode.
MATCHING TRANSFORMER
300 OHM INPUT
IN
75 OHM OUTPUT
(NOT SUPPLIED)
OUT
VCR
NOTE: If a VHF or UHF antenna is
used, set the TV/CATV
MENU option to "TV"
mode.
COMBINER
75/300 OHM INPUTS
75 OHM OUTPUT
(NOT SUPPLIED)
IN
OUT
15
4C80401A-E(P10-19)
15
25/2/99, 21:24
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC CONNECTIONS
(CONTINUED)
VCR TO TV CONNECTION
After you have connected the antenna to the VCR (see pages 14 & 15), you must connect the VCR to the TV.
Below are 3 common methods of connecting your VCR to a TV. Find the type of TV you are using and follow
the connection diagram.
1
IN
75 OHM COAXIAL CABLE (SUPPLIED)
OUT
VCR
2
IN
75 OHM COAXIAL CABLE (SUPPLIED)
OUT
VCR
3
IN
75 OHM COAXIAL CABLE (SUPPLIED)
OUT
VCR
16
4C80401A-E(P10-19)
16
25/2/99, 21:24
Download from Www.Somanuals.com. All Manuals Search And Download.
This VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna
inputs (numbers 2 and 3 below), use a splitter to connect the VCR to the TV for VHF and UHF reception.
NOTE: If a VHF or UHF
antenna is used, set the
TV/CATV MENU option to
"TV" mode.
VHF/UHF IN
TV with single 75 ohm
VHF/UHF antenna input
NOTE: If a VHF or UHF
SPLITTER
antenna is used, set the
75 OHM INPUT
TV/CATV MENU option to
"TV" mode.
UHF
VHF
75/300 OHM OUTPUTS
(NOT SUPPLIED)
TV with 300 ohm UHF
and 75 ohm VHF
antenna inputs
NOTE: If a VHF or UHF
antenna is used, set the
TV/CATV MENU option to
"TV" mode.
SPLITTER
UHF
VHF
75 OHM INPUT
300 OHM OUTPUTS
(NOT SUPPLIED)
TV with 300 ohm UHF
and 300 ohm VHF
antenna inputs
17
4C80401A-E(P10-19)
17
25/2/99, 21:24
Download from Www.Somanuals.com. All Manuals Search And Download.
CATV (CABLE TV) CONNECTIONS
Many cable companies offer services permitting reception of extra channels including pay or subscription
channels.This VCR has an extended tuning range and can be tuned to most cable channels without using a
cable company supplied converter box, except for those channels which are intentionally scrambled. If you
subscribe to a special channel which is scrambled, you must have a descrambler box for proper reception.
IMPORTANT: Make sure the TV/CATV MENU option is set to "CATV" mode.
1
VCR
VHF/UHF
IN
INCOMING CABLE
OUT
IMPORTANT: Make sure the TV/CATV MENU option is set to "CATV" mode.
2
VCR
CONVERTER/DESCRAMBLER
VHF/UHF
IN
INCOMING CABLE
OUT
IMPORTANT: Make sure the TV/CATV MENU option is set to "CATV" mode.
3
VCR
VHF/UHF
IN
INCOMING CABLE
CONVERTER/DESCRAMBLER
OUT
NOTE: WHENEVER A CONVERTER/DESCRAMBLER BOX IS PLACED BEFORE THE VCR, YOU MUST TUNE
THE VCR TO THE OUTPUT OF THE CONVERTER/DESCRAMBLER BOX, USUALLY CHANNEL 3 OR 4.
18
4C80401A-E(P10-19)
18
25/2/99, 21:24
Download from Www.Somanuals.com. All Manuals Search And Download.
This VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled
programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult
your local cable company for more information concerning connection to their descrambler equipment. There are
many ways to connect your VCR to a cable system. Below are six common methods of connection.
TV
For basic cable service, no premium (scrambled) channels.
ALLOWS:
Recording of nonscrambled channels.
Use of the programmable timer.
Recording of one channel while watching another.
*
*
*
VHF/UHF IN
ALLOWS:
TV
Recording of channels through the converter box (scrambled and
unscrambled).
*
Using the programmable timer to record only the channel selected
at the converter box.
*
PREVENTS:
Recording one channel while watching another.
Using the VCR tuner to select channels.
*
*
NOTE:
VHF/UHF IN
To record from converter/descrambler, VCR tuner must be tuned to the
converter output channel, usually channel 3 or 4.
TV
ALLOWS:
Recording of unscrambled channels
Using the programmable timer.
Recording an unscrambled channel while watching any channel
selected at the converter box.
*
*
*
PREVENTS:
Recording scrambled channels.
*
NOTE:
VHF/UHF IN
If you are playing a tape or using the tuner built into the VCR, the
converter must be set to the video channel output of the VCR (either 3
or 4).
19
4C80401A-E(P10-19)
19
25/2/99, 21:24
Download from Www.Somanuals.com. All Manuals Search And Download.
CATV (CABLE TV) CONNECTIONS
(CONTINUED)
IMPORTANT: Make sure the TV/CATV MENU option is set to "CATV" mode.
1
VCR
SPLITTER
VHF/UHF
IN
A
B
INCOMING CABLE
OUT
CONVERTER/DESCRAMBLER
IMPORTANT: Make sure the TV/CATV MENU option is set to "CATV" mode.
2
VCR
SPLITTER
VHF/UHF
IN
OUT
INCOMING CABLE
A
B
CONVERTER/DESCRAMBLER
IMPORTANT: Make sure the TV/CATV MENU option is set to "CATV" mode.
3
VCR
CONVERTER/
DESCRAMBLER
SPLITTER
VHF/UHF
IN
OUT
INCOMING CABLE
A
B
CONVERTER/DESCRAMBLER
WHENEVER A CONVERTER/DESCRAMBLER BOX IS PLACED BEFORE THE VCR, YOU MUST TUNE
THE VCR TO THE OUTPUT OF THE CONVERTER/DESCRAMBLER BOX, USUALLY CHANNEL 3 OR 4.
NOTE:
20
4C80401A-E(P20-29)
20
25/2/99, 21:25
Download from Www.Somanuals.com. All Manuals Search And Download.
ALLOWS:
Recording of all channels through the converter box.
*
*
*
TV
Recording of one channel while watching another.
Using the programmable timer to record only the channel
selected at the converter box.
A/B SWITCH
PREVENTS:
Watching scrambled channels while recording another channel.
Using the VCR tuner to select channels.
*
*
A
B
NOTE:
VHF/UHF IN
To record from converter/descrambler, VCR tuner must be tuned to
the converter output channel, usually channel 3 or 4.
ALLOWS:
TV
Recording of nonscrambled channels.
*
*
*
Recording of one channel while watching another.
Watching premium channels through the converter while recording
nonscrambled channels.
Using the programmable timer.
*
A/B SWITCH
PREVENTS:
Recording scrambled channels.
*
VHF/UHF IN
A
B
ALLOWS:
TV
Recording of all channels through the converter box.
*
*
Recording a scrambled or unscrambled channel while watching
another (scrambled or unscrambled) channel.
Using the programmable timer to record only the channel selected
at the converter box.
*
A/B SWITCH
PREVENTS:
Using the VCR tuner to select channels.
*
NOTE:
VHF/UHF IN
A
To record from converter/descrambler, VCR tuner must be tuned to
the converter output channel, usually channel 3 or 4.
B
YOU MUST TUNE
CHANNEL 3 OR 4.
21
4C80401A-E(P20-29)
21
25/2/99, 21:25
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO/VIDEO CONNECTIONS
If your TV has AUDIO IN and VIDEO IN jacks, you can connect your VCR to them to receive a higher quality
picture and sound. If you have a stereo, you can connect a stereo amplifier to enjoy powerful sound.
AUDIO/VIDEO CONNECTION
From ANTENNA/CATV system
AUDIO/VIDEO Cord
TO VHF/UHF IN
(Not supplied)
VCR
TV
TO VIDEO OUT
TO AUDIO OUT
IN
OUT
TO VHF/UHF
OUT
TO ANT IN
TO VIDEO IN
TO AUDIO IN
1. Connect the VIDEO OUT jack on the VCR to the VIDEO IN jack on the TV.
2. Connect the AUDIO OUT jack on the VCR to the AUDIO IN jack on the TV.
3. Set the VIDEO/TV selector of your TV to "VIDEO".
STEREO AMPLIFIER CONNECTIONS
When you connect your VCR to a Stereo Component System, you can view the picture from the VCR while
enjoying powerful sound from your audio system.
NOTE: Sound will be monaural.
From ANTENNA/CATV system
TO VHF/UHF IN
VIDEO Cord
TO VIDEO IN
TV
(Not supplied)
VCR
TO ANT IN
IN
TO VIDEO OUT
TO AUDIO OUT
OUT
TO AUX IN
TO AUX (R) IN
TO VHF/UHF
OUT
AUDIO Cord (Not supplied)
Connect the AUDIO OUT jack on the VCR to the AUDIO IN jack on the stereo.
22
4C80401A-E(P20-29)
22
25/2/99, 21:25
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE VIDEO CHANNEL
To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV
must be set to channel 3 or 4 (video channel).
When a TV is connected with an antenna cable only.
Set the 3/4 Channel selector
switch (Rear of the VCR) to
CH 3 or 4.
Turn ON the VCR POWER
button.
Turn ON the TV and set to
CH 3 or 4 to correspond
with the channel selected
2
3
1
2
in
.
POWER
CH
3
4
OR
3 4
POWER
1
1
4
5
2
7
8
3
EJECT
CALL
INPUT SELECT
6
CHANNEL
0
9
REC/OTR
+
TV/VCR
5
REW
SLOW
–
COUNTER RESET
PLA
Y
P
AUSE/S
SPEED
MENU
4
F
.FWD
AUT
ST
OP
–
+
O
SET
–
+
ENTER
TRACKING
SEASRKCIHP
CANCEL
CLOCK/
COUNTER
TIMER REC
Select any channel to receive a TV station in
your area.
Press the TV/VCR selector button to select the
VCR position.
5
4
TV/VCR
CH 125
CHANNEL
The channel number will appear on the screen and
display about 4 seconds.
The VCR indicator will light in the display.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/4
channel selector and the TV to CH 3 or 4, play back a prerecorded tape and tune the TV to receive a sharp color
picture from the video cassette recorder. Refer to your TV owner's manual for details.
23
4C80401A-E(P20-29)
23
25/2/99, 21:26
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN LANGUAGE SELECTION
This VCR can display on the TV screen in the English, Spanish or French languages.
Press the SET + or – button
Press the MENU button.
Press the SET + or – button to
select the SYSTEM SET UP
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the
video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button
to select the VCR mode.
1
to select the LANGUAGE
option, then press the
ENTER button.
2
option, then press the ENTER button.
ENTER
ENTER
MENU
–
SET
+
–
SET
+
When a TV is connected with an
audio/video cable, turn the TV and
this VCR on and select the video
input mode on the TV.
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
ON OFF
SYSTEM SET UP
CLOCK SET
LANGUAGE/LENGUA/LANGUE
⟨
+ –
⟩
⟨
+ – ⟩
/ /ENTER/MENU
/
/ENTER/MENU
POWER
1
4
5
2
7
8
3
EJECT
CALL
INPUT SELECT
6
CHANNEL
0
9
REC/OTR
+
TV/VCR
REW
SLOW
1 4
–
COUNTER RESET
PLA
Y
P
AUSE/ST
SPEED
MENU
F
.FWD
AUT
ST
OP
–
+
O
SET
–
+
ENTER
TRACKING
SEASRKCIHP
1 2 3
CANCEL
1 2
CLOCK/
COUNTER
TIMER REC
Press the SET + or – button to select the desired
language: ENGLISH, ESPAÑOL or FRANCAIS.
Press the MENU button three times.
3
4
MENU
–
SET
+
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
⟨
+ – ⟩
/ /ENTER/MENU
24
4C80401A-E(P20-29)
24
25/2/99, 21:26
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
EXAMPLE: Setting the clock to "8:30 AM" October, 23 (SAT), 1999.
Press the SET + or – button
to select the CLOCK SET
option, then press the
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the
video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button
to select the VCR mode.
Press the MENU button.
1
2
ENTER button.
MENU
ENTER
–
SET
+
When a TV is connected with an
audio/video cable, turn the TV and
this VCR on, and select the video
input mode on the TV.
SYSTEM SET UP
CLOCK SET
LANGUAGE/LENGUA/LANGUE
⟨
+ – ⟩
/ /ENTER/MENU
POWER
1
4
5
2
7
8
3
EJECT
CALL
INPUT SELECT
6
CHANNEL
0
9
REC/OTR
+
TV/VCR
REW
SLOW
1
–
COUNTER RESET
PLA
Y
P
AUSE/S
SPEED
MENU
F
.FWD
AUT
O
ST
OP
–
+
2 3
4
SET
–
+
ENTER
TRACKING
SEASRKCIHP
CANCEL
CLOCK/
COUNTER
TIMER REC
Set the day, year and time as in Step 3.
• The day of the week will automatically appear
when you set the year.
• Press and hold down the button to increase/
decrease the minute by 10.
Press the SET + or – button to set the month,
then press the ENTER button.
4
3
–
SET
+
• Auto date and time start functioning when you
finish setting.
ENTER
ENTER
–
SET
+
MONTH
DAY
10
1
MONTH
DAY
10
(SUN)
23 (SAT)
YEAR
TIME
2000
12
YEAR
TIME
1999
:
00 AM
8
:
30 AM
⟨
+ – ⟩
/ /ENTER/CANCEL/MENU
⟨
+ – ⟩
/ /ENTER/CANCEL/MENU
NOTES: After a power failure or disconnection of the power, the timer will be lost. In this case, reset the present time.
•
Press the CANCEL button to move cursor backward for correction.
If you want to corret time or date while the clock is functioning, press the MENU button, then press SET +
or – button to select the SYSTEM SET UP option, then press the ENTER button.
•
•
To make any adjustments perform steps 2 through 4.
25
4C80401A-E(P20-29)
25
25/2/99, 21:26
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CHANNELS
This VCR is equipped with a channel memory feature which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed
into the VCR’s memory. In addition to normal VHF and UHF channels, this VCR can receive up to 113 Cable TV
channels.To use thisVCR with an antenna, set theTV/CATV menu option to theTV mode.When shipped from the
factory, this menu option is in the CATV mode.
TV/CATV SELECTION
Press the MENU button.
Press the SET + or – button to select the CH SET
UP option, then press the ENTER button.
1
2
–
SET
+
ENTER
MENU
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
ON OFF
⟨
+ – ⟩
/ /ENTER/MENU
POWER
1
4
5
2
7
8
3
EJECT
CALL
INPUT SELECT
6
CHANNEL
0
9
REC/OTR
+
TV/VCR
REW
SLOW
1 5
–
COUNTER RESET
PLA
Y
P
AUSE/ST
SPEED
MENU
F
.FWD
AUT
ST
OP
–
+
O
SET
–
+
ENTER
TRACKING
SEASRKCIHP
2 3
CANCEL
2 4
CLOCK/
COUNTER
TIMER REC
Press the SET + or – button
to select the TV/CATV mode.
Press the ENTER button to
select the TV or CATV mode.
The arrow indicates the
selected mode.
Press the MENU button
twice to return to normal TV
viewing.
3
4
5
–
SET
+
ENTER
MENU
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
TV
- VHF/UHF channels
CATV - Cable TV channels
⟨
+ – ⟩
/ /ENTER/MENU
26
4C80401A-E(P20-29)
26
25/2/99, 21:26
Download from Www.Somanuals.com. All Manuals Search And Download.
Your VCR can receive a maximum of 181 channels by presetting the channels into memory.
AUTOMATIC MEMORY TUNING
Press the MENU button.
CHECK BEFORE YOU BEGIN
1
Press the SET + or – button to select the CH
SET UP option, then press the ENTER button.
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
MENU
–
SET
+
ENTER
When a TV is connected with an audio/video cable,
turn the TV and this VCR on, and select the video
input mode on the TV.
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
ON OFF
⟨
+ – ⟩
/ /ENTER/MENU
POWER
1
4
8
5
2
7
3
EJECT
CALL
INPUT SELECT
6
CHANNEL
0
9
REC/OTR
+
TV/VCR
REW
SLOW
1
–
COUNTER RESET
PLA
Y
P
AUSE/S
SPEED
MENU
F
.FWD
AUT
ST
OP
–
+
O
SET
–
+
ENTER
TRACKING
SEASRKCIHP
CANCEL
1 2
CLOCK/
COUNTER
TIMER REC
Press the SET + or – button to select the AUTO
CH MEMORY mode, then press the ENTER
button.
The auto tuning will start. The channel display
3
will count up5and when finished, the screen
2
returns to normal.
ENTER
–
SET
+
CH SET UP
TV CATV
CH 001
AUTO CH MEMORY
ADD/DELETE
⟨
+ – ⟩
/ /ENTER/MENU
27
4C80401A-E(P20-29)
27
25/2/99, 21:26
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CHANNELS
(CONTINUED)
TO ADD/DELETE CHANNELS
Press the MENU button.
Press the SET + or – button
to select the CH SET UP
Press the SET + or – button
Select the desired channels
to be memorized or deleted
using the SET + or – button.
to select the ADD/DELETE
mode, then press the
ENTER button.
2
3
1
option, then press the ENTER button.
ENTER
–
SET
+
ENTER
MENU
–
SET
+
–
SET
+
CH SET UP
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
NO NOISE BACKGROUND
ON OFF
⟨
+ – ⟩
/ /ENTER/MENU
⟨
+ –
⟩
/
/ENTER/MENU
POWER
1
4
5
2
7
8
3
EJECT
CALL
INPUT SELECT
6
CHANNEL
0
9
REC/OTR
+
TV/VCR
REW
1 5
SLOW
–
COUNTER RESET
PLA
Y
P
AUSE/S
SPEED
MENU
F
.FWD
AUT
ST
OP
–
+
O
SET
–
+
ENTER
TRACKING
1 2 3
SEASRKCIHP
CANCEL
2 4
CLOCK/
COUNTER
TIMER REC
Press the MENU button three times after adding
or deleting all of the desired channels, to return
to normal TV viewing.
Press the ENTER button if you wish to DELETE
the channel from memory.
Press the ENTER button if you wish to ADD the
unmemorized channel.
4
5
Repeat Steps 3 and 4 for each channel to be added or
deleted.
MENU
ENTER
ADD
CH 002
⟨
+ – ⟩
/ /ENTER/MENU
28
4C80401A-E(P20-29)
28
25/2/99, 21:26
Download from Www.Somanuals.com. All Manuals Search And Download.
NOISE ELIMINATION (BLUE SCREEN)
When you don't want to receive a weak signal broadcast, the Blue back screen can be obtained by selecting
the NO NOISE BACKGROUND "ON". When the unit is shipped from the factory, the NO NOISE BACK-
GROUND is set to the "ON".
Press the MENU button, then press the SET + or
– button to select the NO NOISE BACKGROUND
option.
CHECK BEFORE YOU BEGIN
1
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the
VCR mode.
–
SET
+
MENU
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
ON OFF
⟨
+ – ⟩
/ /ENTER/MENU
POWER
1
4
5
2
7
8
1
3
EJECT
CALL
6
INPUT SELECT
CHANNEL
0
9
REC/OTR
+
TV/VCR
REW
SLOW
–
COUNTER RESET
PLA
Y
P
AUSE/S
SPEED
MENU
F
.FWD
3
AUT
ST
OP
1
–
+
O
SET
–
+
ENTER
TRACKING
SEASRKCIHP
CANCEL
2
CLOCK/
COUNTER
TIMER REC
Press the ENTER button to select the ON position.
Press the MENU button again.
2
3
MENU
ENTER
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
ON OFF
⟨
+ – ⟩
/ /ENTER/MENU
29
4C80401A-E(P20-29)
29
25/2/99, 21:27
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING AND UNLOADINGVIDEO CASSETTETAPES
Use only video cassette tapes marked
.
LOADING
Push the center of the tape until it is automatically retracted.
AUTOMATIC POWER ON
The VCR will turn on automatically and the POWER indicator will light.
AUTOMATIC PLAY
When loading a cassette tape without the erase prevention tab, playback will start immediately.
Insert the cassette with its labeled side facing
you. An inverted cassette cannot be inserted.
The in the counter display.
2
1
UNLOADING
To unload a cassette, press the EJECT button on the
remote control, or press the STOP/EJECT button on
the VCR twice. The first press will stop the tape in
Pull the cassette out.
2
1
any mode. The second press will eject the tape. The "
"
will appear on the screen. The EJECT indicator will light in
the display.
EJECT
STOP/EJECT
OR
AUTOMATIC EJECT
If the VCR automatically rewinds the tape to the beginning
(AUTO REWIND FEATURE), the tape will be ejected
automatically (See the NOTE on page 37).
The counter display will change to the clock display.
Always eject the tape when not in use.
The cassette can be ejected even if the POWER switch is "OFF".
NOTES:
•
•
30
4C80401A-E(P30-33)
30
25/2/99, 21:27
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
TAPES
To play a prerecorded cassette tape
TO START PLAYBACK
CHECK BEFORE YOU BEGIN
Turn ON the TV and set to the video channel 3 or 4.
Load a prerecorded tape (When loading a
cassette tape without the erase prevention tab,
playback will start automatically).
1
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
The clock display will change in the counter display.
POWER
1
4
5
2
7
8
2
3
EJECT
CALL
INPUT SELECT
6
CHANNEL
0
9
REC/OTR
+
TV/VCR
REW
SLOW
–
COUNTER RESET
PLA
Y
P
AUSE/S
SPEED
MENU
F
.FWD
AUT
ST
OP
–
+
O
SET
–
+
ENTER
TRACKING
SEASRKCIHP
CANCEL
CLOCK/
COUNTER
TIMER REC
TO STOP PLAYBACK
Press the PLAY button. Playback will start.
Press the STOP button once. The tape will stop but
remain fully loaded and ready to play.
2
PLAY
STOP
The " " will appear on the screen about 4 seconds.
The STOP indicator will light in the display about 4 seconds.
The " " will appear on the screen about 4 seconds.
The PLay indicator will light in the display about 4 seconds.
31
4C80401A-E(P30-33)
31
25/2/99, 21:28
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
(CONTINUED)
TO REWIND OR FORWARD THE TAPE RAPIDLY
Press the REW button in the STOP mode.
Press the F.FWD button in the STOP mode.
F.FWD
REW
The "
" will appear on the screen about 4 seconds.
The "
" will appear on the screen about 4 seconds.
The REW indicator will light in the display about 4 seconds.
The F.FWD indicator will light in the display about 4 seconds.
POWER
1
4
5
2
7
8
3
EJECT
CALL
INPUT SELECT
6
CHANNEL
0
9
REC/OTR
+
TV/VCR
REW
SLOW
–
COUNTER RESET
PLA
Y
P
AUSE/S
SPEED
MENU
F
.FWD
AUT
ST
OP
–
+
O
SET
–
+
ENTER
TRACKING
SEASRKCIHP
CANCEL
CLOCK/
COUNTER
TIMER REC
DIGITAL TRACKING CONTROL
When a tape is played, the Digital Auto Tracking System automatically adjusts the tracking to obtain the best
possible picture. If noise bars appear during playback, adjust the tracking manually:
• Press the Manual TRACKING + or – button to obtain the best possible picture. To resume automatic tracking,
press the AUTO Tracking button.
AUTO
–
TRACKING
+
AUTO
TRACKING
+
–
FORWARD/REVERSE PICTURE SEARCH
If you want to see the tape program during REW (F.FWD) mode, press and hold the REW (F.FWD) button again.
The backward (forward) visual search picture will be seen on the screen. Release to return to the REW (F.FWD) mode.
32
4C80401A-E(P30-33)
32
25/2/99, 21:28
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
TO VISUALLY SEARCH FOR DESIRED POINTS
When either the F.FWD or REW button is pressed in the PLAYBACK mode, the speed search picture will appear.
When pressed twice, the search picture will increase speed. Speed search time depends upon the speed used
(SP, LP or SLP) during recording.To rewind or fast forward a tape, press the STOP button, and then press the REW
or F.FWD button.
To visually search backward, press the REW button
once or twice in the PLAYBACK mode.
To visually search forward, press the F.FWD button
once or twice in the PLAYBACK mode.
F.FWD
REW
The CUE indicator will light in the display about 4 seconds.
Press the PLAY button to resume normal viewing speed.
The REVEW indicator will light in the display about 4 seconds.
Press the PLAY button to resume normal viewing speed.
SKIP SEARCH
TO WATCH A STILL PICTURE
Press the SKIP SEARCH button in the PLAY mode.
The VCR will search forward through approximately
60 seconds of the tape (e.g. unwanted commercial
time) and then resume normal playback.
Press the PAUSE/STILL button in the PLAYBACK
mode.
PAUSE/STILL
SKIP
SEARCH
The STILL indicator will light in the display about 4 seconds.
Press the PAUSE/STILL button again to resume normal
playback.
The CUE 1 indicator will light in the display.
(For example : 1 press).
SLOW MOTION PLAYBACK
FRAME BY FRAME ADVANCE
Press the SLOW button during STILL playback.
SLOW
Press the SLOW button in the PLAYBACK mode.
Playback will proceed at 1/10th of the normal speed.
SLOW
The SLOW indicator will light in the display about 4 seconds.
Press the PLAY button again to resume normal playback.
NOTE: SLOW TRACKING AND VERTICAL LOCK
ADJUSTMENT
If noise bars appear in the picture during slow motion, press
the Manual TRACKING + or – button to reduce the noise
bars. If the still picture jitters excessively, press the Manual
TRACKING + or – button to stabilize the still picture.
The still picture will advance by one frame each time
you press the button. Hold the button for continuous
frame by frame viewing.
Press the PAUSE/STILL button again to resume normal
playback.
Best results during speed search playback can be obtained with cassette tapes recorded in the "SP"and"SLP"
•
NOTES:
mode.
The audio output is muted during SPEED SEARCH and STILL.
•
•
•
A few noise bars will appear on the picture during SPEED SEARCH ,STILL, FRAME ADVANCE and SLOW MOTION.
To prevent damage to the tape, CUE, REVIEW and STILL playback is automatically changed to the PLAYBACK
mode after 5 minutes.
33
4C80401A-E(P30-33)
33
25/2/99, 21:28
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
(CONTINUED)
TO WATCH A TAPE REPEATEDLY
CHECK BEFORE YOU BEGIN
Press the MENU button.
Press the SET + or – button to select the AUTO
REPEAT option.
1
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the VCR
mode.
–
SET
+
MENU
When a TV is connected with an audio/video cable,
turn the TV and this VCR on, and select the video
input mode on the TV.
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
⟨
+ – ⟩
/ /ENTER/MENU
POWER
1
4
5
2
7
8
3
EJECT
CALL
INPUT SELECT
6
CHANNEL
0
9
REC/OTR
+
TV/VCR
REW
SLOW
–
1 3
COUNTER RESET
PLA
Y
P
AUSE/S
SPEED
MENU
F
.FWD
AUT
ST
OP
–
+
O
SET
–
+
ENTER
TRACKING
SEASRKCIHP
CANCEL
1
2
CLOCK/
COUNTER
TIMER REC
Press the ENTER button to select the ON
position.
Press the MENU button.
If you press the PLAY button, the tape will play
over and over until the repeat mode is canceled.
3
2
MENU
ENTER
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
"
" will appear if you press the CALL button.
⟨
+ – ⟩
/ /ENTER/MENU
To cancel, press the CALL button again.
NOTE: To cancel repeat mode, follow the above steps 1 and 2, then press the ENTER button to select the OFF
position. Press the MENU button to return to the TV.
34
4C80401A-E(P30-33)
34
25/2/99, 21:28
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING A TV PROGRAM
RECORDING AND VIEWING THE SAME TV PROGRAM
Load a cassette tape with the erase prevention
tab intact.
The VCR will automatically turn on.
CHECK BEFOREYOU BEGIN
1
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the
VCR mode.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
The clock display will change in the counter display.
VHF/UHF/CATV CHANNELS
POWER
TV
CATV
1
4
5
VHF
2-13
VHF
2-13
2
7
8
3
3
EJECT
CALL
STD/HRC/IRC
14-36
UHF
14-69
6
INPUT SELECT
CHANNEL
0
9
REC/OTR
(A) (W)
37-59
+
TV/VCR
REW
SLOW
–
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
COUNTER RESET
PLA
Y
P
AUSE/S
SPEED
MENU
2
(86) (94)
95-99
F
.FWD
AUT
ST
OP
–
+
O
SET
(A-5) (A-1)
100-125
(100)(125)
01
–
+
ENTER
TRACKING
SEASRKCIHP
CANCEL
CLOCK/
COUNTER
TIMER REC
(5A)
Press the direct channel selection buttons or the
CHANNEL ▲ or ▼ button to select the channel to
be recorded.
Press the SPEED selector button to select the
desired tape speed SP, LP or SLP.
3
2
1-9
Press 0 twice and then 1-9 as required.
(Example; to select 2, press 002.)
Press 0 first and then the remaining 2
digits in order from left to right.
(Example; press 018 for 18.)
Press 2 digits in order. (Example; press
22 for 22.)
10-19
SPEED
20-99
100-125 Press the 3 digits in order. (Example;
press 110 for 110.)
CHANNEL
CH 110
1
1
0
00 : 00 : 00 SP
or
The counter and SP, LP or SLP will appear on the
screen about 4 seconds.
Since the VCR has its own TV tuner, it is not actually necessary to have the TV turned on in order to make a
recording. Turning on the TV merely allows confirmation of the proper channel settings on your VCR.
NOTE:
35
4C80401A-E(P34-39)
35
25/2/99, 21:42
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING A TV PROGRAM
(CONTINUED)
TO STOP RECORDING
Press the REC/OTR button.
Press the STOP button to stop recording.
4
REC/OTR
CH 110
STOP
"
" will appear on the screen about 4 seconds.
"
" will appear on screen about 4 seconds.
The REC indicator will light in the display about 4 seconds. The STOP indicator will light in the display about 4 seconds.
POWER
1
4
5
4
2
7
8
3
EJECT
CALL
INPUT SELECT
6
CHANNEL
0
9
REC/OT
+
TV/VCR
REW
SLOW
–
COUNTER RESET
PLA
Y
P
AUSE/S
SPEED
MENU
F
.FWD
AUT
O
ST
OP
–
+
SET
–
+
ENTER
TRACKING
SEASRKCIHP
CANCEL
CLOCK/
COUNTER
TIMER REC
TO STOP RECORDING TEMPORARILY
Press the PAUSE/STILL button to avoid recording unwanted material. Press again to continue the recording.
PAUSE/STILL
"
" will appear on screen about 4 seconds and the REC indicator will light in the display to continue pause mode.
NOTE: The pause function will be released after 5 minutes to prevent damage to the tape or the VCR. The VCR
will change to the STOP mode.
NOTE: AUTO REWIND FEATURE
This VCR will automatically rewind the tape when the tape has ended (except during OTR and TIMER REC).
It will also eject the tape and turn the VCR’s power OFF.
36
4C80401A-E(P34-39)
36
25/2/99, 21:42
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING ONE PROGRAM WHILE WATCHING ANOTHER
While the VCR is recording, press the TV/VCR
selector button to select the TV position.
The TV/VCR indicator will go off and recording
will continue.
Select the TV channel you want to watch by
using the TV channel selector.
1
2
TV/VCR
NOTE: Some CATV hookups do not permit viewing one channel while recording another. See pages 18-21.
TO PREVENT AN ACCIDENTAL RECORDING TO RECORD AGAIN
After recording, break off the erase prevention
tab if you do not wish to record over the tape.
Cover the hole with adhesive tape.
Be careful the tape does not extend past the edges
of the cassette housing.
Erase prevention tab
Adhesive tape
TAPE SPEED AND MAXIMUM RECORDING/PLAYBACK TIME
VIDEO CASSETTE TAPE
TAPE SPEED
T-210
T-160
T-120
T-90
T-60
T-30
SP
2 hours
4 hours
6 hours
1-1/2 hours
3 hours
1 hour
2 hours
3 hours
30 minutes
1 hour
3-1/2 hours
7 hours
2-2/3 hours
5-1/3 hours
8 hours
(Standard Play)
LP
(Long Play)
SLP
4-1/2 hours
10-1/2 hours
1-1/2 hours
(Super Long Play)
37
4C80401A-E(P34-39)
37
25/2/99, 21:42
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE TIMER RECORDING
Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1 month.
EXAMPLE: Program a timer recording for the 26th day, channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1. (Tape speed: SLP)
Press the MENU button. Check the TIMER REC
SET option is selected, then press the ENTER
button.
CHECK BEFORE YOU BEGIN
1
Turn on the TV and set to the video channel 3 or 4.
Press the TV/VCR selector button to select the VCR
•
•
mode.
Load a video cassette with the erase prevention tab
intact. The VCR will automatically turn on.
•
ENTER
MENU
Check that the clock and date are correct (see page
25).
•
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
⟨
+ – ⟩
/ /ENTER/MENU
POWER
1
4
5
2
7
8
3
EJECT
CALL
INPUT SELECT
6
CHANNEL
0
9
REC/OTR
+
TV/VCR
REW
SLOW
–
COUNTER RESET
PLA
Y
P
AUSE/ST
SPEED
1
MENU
F
.FWD
AUT
ST
OP
–
+
O
SET
–
+
ENTER
TRACKING
2 3
SEASRKCIHP
CANCEL
1 2 3
CLOCK/
COUNTER
TIMER REC
Press the SET + or – button to select the date,
then press the ENTER button.
Press the SET + or – button to select the one of
the program line, then press the ENTER button.
2
3
–
SET
+
ENTER
ENTER
–
SET
+
DATE START
END
CH
– –
– –
– –
– –
– –
– –
– –
– –
TIMER REC SET
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
–
–
–
–
–
–
–
–
DATE
START
END
26 (WED)
12
– –
1
:
:
00 AM
– –
CH
SPEED
SP
⟨
+ –
⟩
⟨
+ – ⟩
/ /ENTER/CANCEL/MENU
/
/ENTER/CANCEL/MENU
NOTE:
To set the timer for other programs, press the MENU button. Check that the TIMER REC SET option is
selected, then press the ENTER button. Press the SET + or – button until the next program blinks, then
press the ENTER button. Repeat steps 3 to 4 to set the second program.
38
4C80401A-E(P34-39)
38
25/2/99, 21:42
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the start time, end time, channel and tape
speed as in step 3.
Press the ENTER button to accept them.
To enter other programmes, repeat step 2
through 4. Or, press the MENU button twice to
return to the normal screen.
5
4
–
SET
+
ENTER
MENU
ENTER
TIMER REC SET
DATE START
END
CH
(
)
26 WE 11:00PM 11:30PM 25 SLP
DATE
START
END
CH
SPEED
26 (WED)
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
– –
– –
– –
– –
– –
– –
– –
–
–
–
–
–
–
–
11
11
:
:
00 PM
30 PM
25
SLP
⟨
+ – ⟩
/ /ENTER/CANCEL/MENU
⟨
+ –
⟩
/
/ENTER/CANCEL/MENU
POWER
4
1
4
5
2
7
8
3
EJECT
CALL
6
INPUT SELECT
CHANNEL
0
9
REC/OTR
+
TV/VCR
REW
5
SLOW
–
COUNTER RESET
PLA
Y
P
AUSE/S
SPEED
MENU
F
.FWD
AUT
ST
OP
–
+
5
O
SET
–
+
ENTER
TRACKING
SEASRKCIHP
CANCEL
CLOCK/
COUNTER
TIMER REC
6
TO CORRECT THE SETTINGS
While setting, press the ENTER button to flash the item
to correct, then re-enter the setting with the SET + or –
button.
Press the TIMER REC button. The power will go
off, the Timer Record indicator will light and the
VCR stands by for recording.
6
When finished, press the ENTER button.
TIMER REC
To cancel timer recoreding, press the button again and
the Timer Record indicator will go out.
NOTES: • The VCR cannot be used while the Timer Record indicator is lit.
After a power failure or disconnection of the power plug, all programmed recording settings must be reset
upon resumption of power. In this case, reset the clock (see page 25) and reprogram any timer recordings.
Press the CANCEL button to move cursor backward for correction.
•
•
•
To record from external source set the channel to "L1" or "L2". "L1" and "L2" will appear next to
CH 125 (or 69).
39
4C80401A-E(P34-39)
39
25/2/99, 21:43
Download from Www.Somanuals.com. All Manuals Search And Download.
|