LG Electronics Computer Drive HT762TZW User Manual

HT762TZW-A0_DCANLLK_canENG_2933 2/21/08 8:51 PM Page 1

http://www.lg.ca

Model: HT762TZW(HT762TZW, SH72TZ-S/C/W, W93-T/R)

Full HD up-scaling

(1080p)

Portable In

View Full HD picture quality Listen to music from your

Unique Features

with simple setup.

portable device (MP3,

Notebook, etc).

Go to page 19

Go to page 10

P/NO : MFL42932933

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 3

Copyrights

IMPORTANT SAFETY

INSTRUCTIONS

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

It is forbidden by law to copy, broadcast, show, broadcast via cable, play in

public, or rent copyrighted material without permission. This product features

the copy protection function developed by Macrovision. Copy protection signals

are recorded on some discs. When recording and playing the pictures of these

discs picture noise will appear. This product incorporates copyright protection

technology that is protected by method claims of certain U.S. patents and other

intellectual property rights owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology must be authorized by

Macrovision Corporation, and is intended for home and other limited viewing

uses only unless otherwise authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

1. Read these instructions.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manu-

facturer's instructions.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVI-

SION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY

CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525

PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT

THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’

OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPAT-

IBILITY WITH THIS MODEL 525p UNIT, PLEASE CONTACT OUR CUS-

TOMER SERVICE CENTER.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or

the third prong are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsolete out-

let.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen into

the apparatus, the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 4

Welcome to your new DVD Receiver

Contents

Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7

What is SIMPLINK?

LED indicator of Wireless Transmitter . . . . . . . . . . . . .8

LED indicator of Wireless Receiver . . . . . . . . . . . . . .8

Setting an ID of Wireless Transmitter . . . . . . . . . . . . .8

Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . .9-10

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . .13-14

Setting the sound mode . . . . . . . . . . . . . . . . . . . . . .14

Displaying Disc Information . . . . . . . . . . . . . . . . . . .15

Playing a disc or file . . . . . . . . . . . . . . . . . . . . . .15-17

Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . .18

Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . .18

Listening to music from your USB device . . . . . . . . .19

Listening to music from your portable player . . . . . . .19

Controlling your TV with the supplied Remote Control .20

Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . .23

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Some functions of this unit are controlled by TV’s remote control when this unit and

LG TV with SIMPLINK are connected through HDMI connection.

•

Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop,

Power Off, etc.

•

Refer to the TV owner’s manual for the details of SIMPLINK function.

LG TV with SIMPLINK function has the logo as shown above.

Use a higher version cable than 1.2A HDMI cable.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects

filled with liquids, such as vases, should be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances should be placed on a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or

branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension

cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these

conditions could result in electric shock or fire. Periodically examine the cord of your appliance,

and if its appearance indicates damage or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the

point where the cord exits the appliance.

To disconnect power from the unit, unplug the unit from the outlet. When installing the product,

ensure that the plug is easily accessible.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 5

Setting up

Attaching the speakers to the DVD receiver

You will have received 4 speaker cables.

Each one is color-coded by a band near each end and connects one of

the 4 speakers to the DVD receiver.

The speakers are detached from the speaker stands.

Connect the wires to the DVD receiver.

Match each wire’s colored band to the same colored connection terminal

on the rear of the DVD receiver. To connect the cable to the DVD receiv-

er, press each plastic finger pad to open the connection terminal. Insert

the wire and release the finger pad.

Connect the red end of each wire to the

terminals marked +(plus) and the black

end to the terminals marked - (minus).

Assembling to the Speakers

1 Fix the post to the base by rotating the post. And Draw the

speaker cord through the hole on the base.

Connect the wires to the speakers.

2 Draw the speaker cord through the hole on the speaker.

Connect the other end of each wire to the correct speaker according to

3 Fix the speaker to the stand by rotating the speaker. Connect the

speaker cord to the appropriate terminals on the speaker.

the color coding:

COLOR

SPEAKER

POSITION

Green

Orange

Red

Center

Above screen, directly in front of you.

Sub Woofer

Front

In front of you, to the right of the

screen.

White

Front

In front of you, to the left of the

screen.

To connect the cable to the speakers, press each plastic finger pad to open the

connection terminals on the base of each speaker. Insert the wire and release

the finger pad.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 6

Setting up

Attaching the speakers to the Wireless Receiver

Connect the power cord of the Wireless Receiver to the outlet.

Connect the wires to the Wireless Receiver.

Connect the Wireless Receiver and the rear speaker (right, left) with the speaker cable.

Attaching the

Wireless Transmitter

to the DVD receiver

Connect the DC power

cable to the unit and trans-

mitter.

Connect the SOUND SIG-

NAL connector of the

Wireless Transmitter and

rear (right, left) speaker of

the main set with the

sound signal cable.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 7

Be careful of the following

About Ferrite Core

•

Be careful to make sure children do not put their hands or any objects into

the *speaker duct.

Be sure to attach the ferrite core to the speaker cable (for connecting to

this unit and wireless receiver).

*Speaker duct: A hall for plentiful bass sound on speaker cabinet(enclosure).

•

This ferrite core can reduce noises.

Set the distance between this unit and Wireless Receiver within 10m.

Optimum performance can be implemented only when the Wireless

Transmitter and the Wireless Receiver within distance of 2m to 10m is used

since communication failure may occur if longer distance is used.

Be sure to match the speaker cable to the appropriate terminal on the com-

ponents: + to + and – to –. If the cables are reversed, the sound will be dis-

torted and will lack bass.

It takes a few seconds (and may take longer) for the Wireless Transmitter and

Wireless Receiver to communicate with each other.

When the unit is turned off, the Wireless Transmitter is in standby mode (off)

automatically after about 10 seconds.

How to attach the ferrite core

Press the stopper [a] of the ferrite core to open.

Wind the speaker cables once on the ferrite core. (Refer to the fig.3 and

comment.).

•

Close the ferrite core until it clicks.

•

If the Wireless Transmitter is turned off, the Wireless Receiver will not func-

tion.

Rear of wire-

less receiver

(fig.3)

The

length

here is as

short as

possible.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 8

LED indicator of Wireless

Transmitter

Setting an ID of Wireless

Transmitter

Operation

When the unit is manufactured, the ID is already set. If an interference

occurs or you use a new Wireless Receiver, an ID is set again.

LED color

BLUE

The main set is turned on, everything is connected

and transmitting.

ON Wireless Kit

RED

The wireless transmitter is in standby mode.

The DC cable is disconnected to the unit.

1 Connect the SOUND SIGNAL connector of

the transmitter and the rear (right, left) speaker

terminals of main unit with the SOUND

OFF (No display)

SIGNAL cable.:

2 Connect the DC cable to the unit

and transmitter.:

LED indicator of Wireless

Receiver

3 Turn off the Wireless Receiver:

POWER Switch

4 Press the ID. for more than 3 seconds:

The Blue LED indicator will quickly flicker

Operation

LED color

ID.

BLUE

The Wireless Receiver is receiving the signal of

the Wireless transmitter

5 Turn on the Wireless Receiver:

POWER Switch

RED

The Wireless Receiver is in standby mode.

The Wireless Receiver is turned off.

Be careful of the following

OFF (No display)

If there is a strong electromagnetic wave product nearby, interference may

occur. Put the unit (Wireless Receiver and main unit) away from there.(Ex:

Microwave oven)

If there is no audio signal for longer than 10 minutes, the Wireless Receiver

and Wireless Transmitter will automatically switch to standby mode. In power

saving mode, both LEDs will turn red. LEDs will turn blue when there is any

audio signal back.

If you operate main unit then wireless speakers (rear speakers) sound within a

few seconds in standby mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 9

Hooking up the unit

a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.

Audio In connection

Video Out connection

The unit’s Audio jacks are

colour coded (red for right

audio and white for left

audio). If your TV has only

one input for audio (mono),

connect it to the left (white)

audio jack on the unit.

Connect the VIDEO OUT-

PUT jack on the unit to the

corresponding input jack on

your TV using a Video cable.

AM/FM connection

AM - Connect the AM loop

aerial to the DVD receiver.

FM - Connect the FM aerial.

The reception will be its best

when the two loose ends of

the aerial are in a straight and

horizontal line.

Component Video connection

Connect the COMPO-

NENT/PROGRESSIVE

SCAN OUTPUT jacks on the

unit to the corresponding

input jacks on your TV using

a Y PB PR cable.

b Plug the power cord into the power source.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 10

Hooking up the unit

HDMI Out connection

Hooking up the unit - more

function

Connect the HDMI OUTPUT jack

on the unit to the HDMI input jack

on an HDMI compatible TV using

an HDMI cable. Set the TV’s

source to HDMI. In stop mode,

select HDMI mode by pressing

HDMI.

Resolution Setting

You can change the resolution for component video

and HDMI output.

Press RESOLUTION repeatedly to select the desired

resolution - 480i, 480p, 720p, 1080i, 1080p

The resolution may not be selected depending on the

connection or TV.

Available resolution according to connection

[HDMI OUT]: 1080p, 1080i, 720p and 480p

[COMPONENT VIDEO OUT]: 1080i, 720p, 480p and

480i

[VIDEO OUT]: 480i

Notes on HDMI connection

•

If the picture does not appear on the screen with

the analog video connections, change the resolu-

tion to 480i.

•

For 720p and 1080i resolution on the component

video out, only non-copy protected discs can be

played back. If the disc is copy protected, it will be

displayed at the 480p(NTSC) resolution.

1080p, 1080i, 720p and 480p does not work with

the analog video connections (MONITOR OUT).

If you change the resolution, the display MENU

(MP3/JPEG/DivX) size is changed.

If your TV does not accept your resolution setting,

abnormal picture appears on the screen.

Please read owner’s manual for TV, and then set

the resolution that your TV can accept.

Digital Audio in connection

•

Connect the unit’s OPTICAL

IN jack to the optical out jack

on your TV (or Digital Device

etc.)

Enjoying audio from an external source

You can enjoy audio from an external source through

your DVD receiver.

Press AUX repeatedly to select the desired input

source. - AUX, AUX OPT, AUDIO IN

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 11

Remote control

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ a ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

RETURN (O) : Press to move backwards in the menu.

PRESET(-/+) : Selects programed station of Radio.

TUN.(-/+) : Tunes in the desired radio station.

ENTER : Acknowledges menu selection.

TUNER : Selects the System’s tuner (FM and AM bands).

AUX : Changes the input source ( AUX, AUX OPT,

PORTABLE)

USB : Plays the multimedia files.

DIMMER : Changes brightness of the display window on

the front panel during power-on status.

TUNER

AUX

OPEN/CLOSE

POWER

DVD

b / B / v / V (left/right/up/down) :Used to navigate on-

screen displays.

USB

PROG./MEMO.

DIMMER

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ e ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

AUDIO

SOUND

S-TITLE

CLEAR

OPEN/CLOSE (Z) : Opens and closes the disc tray.

DVD : Selects the function (DVD/CD)

PROG./MEMO. : Accesses or removes Program menu.

POWER : Switches the unit ON or OFF.

VSM : Press VSM to set the VIRTUAL sound.

XTS Pro : Supplies more natural and realistic sound.

Supplies great sound effect.

SLEEP : Sets the System to turn off automatically at a

REPEAT

REPEAT A-B

MARKER

SCAN

TITLE

SKIP

SCAN +

PAUSE/STEP

specified time.

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ b ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

AUDIO : Selects an audio language (DVD) or an audio

channel (CD).

STOP

PLAY

MUTE : Press MUTE to mute your unit. You can mute your

unit in order, for example, to answer the telephone.

VOLUME (+/-) : Adjusts speaker volume.

ZOOM

DISPLAY

RETURN

SETUP

SOUND : Selects the sound mode.

0-9 numerical buttons : Selects numbered options in a

menu.

S-TITLE : During playback ,S - TITLE repeatedly to select

a desired subtitle language.

HDMI : Switches the HDMI mode to HDMI (active) and

OFF (inactive).

RESOLUTION (RESOL.): Changes the resolution depend-

ing on your TV.

CLEAR : Removes a track number on the Program List.

REPEAT : Repeats a Chapter/ Track/ Title/ all.

REPEAT A-B : Repeats sequence.

ENTER

MARKER : Marks a point during playback.

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ f ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

SEARCH : Displays MARKER SEARCH menu.

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ c ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

SCAN(bb / BB) : Search backward or forward.

SLEEP

MUTE

TV Control buttons : Controls the TV. See the page 20.

VOL

Put the batteries into the remote control

SKIP(. / >): Go to next or previous chapter/ track.

TITLE : If the current DVD title has a menu, the title menu

appears on the screen. Otherwise, the disc menu may

appear.

Make sure that the + (plus) and – (minus) on the batter-

ies match those on the remote control.

STOP (x): Stops playback.

PLAY (B): Starts playback

PAUSE/STEP (X): Pause playback.

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ d ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

MENU : Accesses the menu on a DVD disc.

ZOOM : Watching an enlarged video image

SETUP : Accesses or removes setup menu

DISPLAY : Accesses On-Screen Display.

RESOL .

HDMI

POWER

INPUT

CHANNEL

VOLUME

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 12

Main Unit

Open/Close

Func., Play

Press and hold down this button for

about 3 seconds then press repeat-

edly to select other function.

DVD/CD Disc Drawer

PORT. IN port

The PORT. In port means you can connect

a audio device to play trough the surround

sound speakers.

Pause

Mono/Stereo(St.)

Stop

Power

Turn the unit

on and off.

Tuning (-/+)

Skip / Search

USB port

Volume

Control the volume when using any function.

The USB port allows you can connect a

memory device to your DVD player.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 13

Adjust the settings

5.1 Speaker Setup

ON REMOTE

1 Display setup menu :

SETUP

v V

1 Open the settings menu:

2 Scroll to the audio icon:

SETUP

2 Select a desired option on the first level:

3 Move to second level:

3 Scroll right to enter the audio menu, then

select 5.1 Speaker Setup:

B v V ENTER

4 Select a desired option on the second level: v V

4 Highlight the speaker you want to adjust:

b B

5 Move to third level:

6 Change the setting:

v V, ENTER

Adjust the settings - more function

Adjust the language settings

OSD – Select a language for the Setup menu and on-screen display.

Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.

[Original]: Refers to the original language in which the disc was recorded.

[Others]: To select another language, press number buttons then ENTER to

enter the corresponding

4-digit number according to the language code list in the reference chapter

(see page 21). If you make a mistake before pressing ENTER, press CLEAR.

[OFF] (for Disc Subtitle): Turn off Subtitle.

5 Move between the options and change

the settings:

v V b B

6 Set the output level (volume) of a speaker:

Anywhere between -5dB and +5dB.

Size : Since the speaker setting are

fixed, you cannot change the setting.

Adjust the display settings

b B

TV Aspect – Select which screen aspect to use based on the shape of your TV

screen.

[4:3]: Select when a standard 4:3 TV is connected.

[16:9]: Select when a 16:9 wide TV is connected.

7 Set the distance each Speaker is away

from your set watching position.

This ensures that all sound reaches you

perfectly synchronised. You cannot adjust the

front or subwoofer speakers.

Display Mode – If you selected 4:3, you’ll need to define how you would like

widescreen programs and films to be displayed on your TV screen.

[Letterbox]: This displays a widescreen picture with black bands at the top

and bottom of the screen.

b B

8 Test the signals of each speaker:

Adjust the volume to your taste

according to these signals.

b B

[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.

9 Save your settings and exit the Setup

menu:

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 14

Adjust the audio settings

Setting the sound mode

Switch on XTS/XTS Pro Sound

DRC (Dynamic Range Control) – Make the sound clear when the volume is

turned down (Dolby Digital only). Set to [On] for this effect.

XTS allows you to get the best sound quality for whatever you are watching. Press

the XTS Pro button repeatedly to cycle through the three options:XTS On, XTS Pro

On, Normal.

Vocal – Select [On] to mix karaoke channels into normal stereo. This function is

effective for multi-channel karaoke DVDs only.

HD AV Sync - Sometimes Digital TV encounters a delay between picture and

sound. If this happens you can compensate by setting a delay on the sound so

that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use vV

to scroll up and down through the delay amount, which you can set at anything

between 0 and 300m sec.

XTS -

Use XTS when the bass of an original soundtrack is weak by

enhancing the subwoofer. It also splits the sound evenly

between the front and rear speakers.

XTS-P - This optimizes the audio signal in balanced frequency response and

enhances the speakers’ performance. XTS Pro also recognizes Dolby

Digital, Pro Logic II, and DTS surround-sound processing modes.

The delay will vary depending on which digital TV channel you are on. If you

change the channel you may need to readjust the HD AV Sync.

Adjust the lock settings

Set a pre-programmed sound field

To access the lock options, you must enter the 4-digit password. If you have not

yet entered a password you are prompted to do so. Enter a 4-digit password.

Enter it again to verify. If you make a mistake while entering the number, press

CLEAR to delete numbers.

This system has a number of pre-set surround sound fields. Select the one

which best suits the program you are watching by pressing SOUND repeatedly

to cycle through the options: Bypass, On Stage, Studio, Club, Hall, Theatre,

Church, Movie, Music, Matrix.

If you forget your password you can reset it. Press SETUP to display the Setup

menu. Input ‘210499’ and press ENTER. The password has now been cleared.

VSM (VIRTUAL SOUND MATRIX)

You can select the Virtual sound. Press VSM to set the virtual sound.

Rating – Select a rating level. The lower the level, the stricter the rating. Select

[Unlock] to deactivate the rating.

2Ch source

[ON STAGE] mode: Simulates a large Concert hall

[VIRTUAL] mode: Realtime 3D positioned sound rendering technology

with stereo sources, optimized for stereo speakers. Listeners may expe-

rience amazing virtual surround effects with their own multimedia play-

ers.

Password – Sets or changes the password for lock settings.

[New]: Enter a new 4-digit password using the numerical buttons then press

ENTER. Enter the password again to confirm.

[Change]: Enter the new password twice after entering the current password.

Area code – Select a code for a geographic area as the playback rating level.

This determines which area’s standards are used to rate DVDs controlled by the

parental lock. See the Area Codes on page 21.

5.1Ch source

[VIRTUAL] mode: The Multichannel sound changes the sound in 5.1 ch

into a virtual one in the 10.1 ch so that it provides such a feeling that

you listen to the sound simultaneously from the right and left speakers

and center speaker.

Adjust the others settings

PBC (Playback Control) – Playback control provides special navigation fea-

tures that are available on some Video CDs. Select [On] to use this feature.

DivX(R) Registration – We provide you with the DivX® VOD (Video On

Demand) registration code that allows you to rent and purchase videos using

the DivX® VOD service.

For more information, visit www.divx.com/vod.

Press ENTER when [Select] icon is highlighted and you can view the registra-

tion code of the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 15

Displaying Disc Information

Playing a Disc or file

ON REMOTE

1 Press DISPLAY:

DISPLAY

v V

1 Open the disc tray:

2 Insert a Disc: (On unit)

3 Close the disc tray:

OPEN/CLOSE

2 Select a item:

3 Adjust the Display menu settings:

4 To return the exit:

b B

OPEN/CLOSE

DISPLAY

4 Adjust the menu settings:

or Select a file from the menu:

vV b B

v V

5 Start the Disc playing:

PLAY

STOP

Displaying Disc Information - more function

You can select an item by pressing vV and change or select the setting by

6 To stop the Disc playing:

pressing b B.

Playing a Disc or file - more function

Current title (or track)

number/total number of titles (or tracks)

Current chapter number/total number of chapters

1/6

DVD

VCD

Playing a DVD or Video CD that has a menu

4/26

Most DVDs or Video CD now have menus which load first before the film begins

to play. You can navigate these menus using vV b B to highlight an option.

Press ENTER to select.

Elapsed playing time

Selected audio language or channel

ENG

3/2.1CH

KOR

1/3

Selected subtitle

Selected angle/total number of angles

ALL

Skip to the next/previous chapter/track

Press SKIP (>) to move to the next chapter/track.

Press SKIP (.) to return to the beginning of the current chapter/track.

Press SKIP (.) twice briefly to step back to the previous chapter/track.

Selected sound mode

Moving to another GROUP (in case of DVD Audio Disc)

Viewing another PAGE (in case of DVD Audio Disc)

ALL

Pause playback

Symbol Used in this Manual

Press PAUSE/STEP (X) to pause playback. Press PLAY (B) to continue play-

back.

ALL

DVD

VCD

ACD

MP3

WMA

DivX

All discs and files listed below

DVD and finalized DVD R/RW

Video CDs

MP3 files

WMA files

DivX files

DVD

DivX

VCD

Frame-by-Frame playback

Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.

Audio CDs

ALL

Playing repeatedly

Press REPEAT repeatedly to select an item to be repeated. The current title,

chapter or track will be played back repeatedly. To return to normal playback,

press REPEAT repeatedly to select [OFF]. This function does not operate dur-

ing Video CD playback, change the PBC to OFF on setup menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 16

ALL

Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEG

Fast forward or fast reverse

When playing a disc or USB Flash Drive containing DivX, MP3/WMA and JPEG

files together, you can select which menu of files you would like to play by

pressing TITLE

Press SCAN (m or M) to play fast forward or fast reverse during playback.

You can change the playback speed by pressing SCAN (m or M) repeated-

ly. Press PLAY (B) to continue play at normal speed.

DVD

DivX

Selecting a subtitle language

DivX

Changing the character set to display DivX subtitle correctly

During playback, press S-TITLE ( ) repeatedly to select a desired subtitle lan-

guage.

If the subtitle does not display properly during playback, press and hold S-

TITLE for about 3 seconds then press S-TITLE to select another language code

until the subtitle is displayed properly

DVD

VCD

Slow down the playing speed

DivX

DivX file requirement

While playback is paused, press SCAN (bb or BB) to slow down, go forward

or reverse playback. You can change the various playback speed by pressing

SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal

speed. The video CD cannot be slow down reverse playback.

DivX disc compatibility with this player is limited as follows:

Available resolution size: 800x600 (W x H) pixel

The file name of the DivX subtitle is available by 45 characters.

If the cords is impossible code to express in the DivX file, it may be displayed

as " _ " mark on the display.

•

DVD

VCD

ACD

MP3

WMA

Watch and listen 1.5 times faster

Press PLAY when a DVD is already playing to watch and listen to a DVD 1.5

times faster than normal playback speed. B x1.5 will appear in the top right cor-

ner of the screen. Press PLAY again to return to normal playback speed.

•

If the number of the screen frame is over 30 per 1 second, this unit may not

operate normally.

If the video and audio structure of recorded files are not interleaved, either

video or audio is outputted.

The file name of the DivX subtitle is available by 45 characters.

If the name of movie file is different from that of the subtitle file,during play-

back of a DivX file, subtitle may not be displayed.

DVD

Viewing the Title menu

•

Press TITLE to display the disc's title menu, if available.

DVD

Viewing the DVD MENU

•

MPEG4 file extensions: “.avi”, “.mpg”, “.mpeg”

Playable DivX subtitle: SubRip(*.srt/*.txt) ,SAMI(*.smi), SubStation

Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt)

(Files (VobSub(.sub) included with USB device is not supported

SubViewer 2.0 (.sub/.txt), TMPlayer(.txt), DVD Subtitle System(.txt)

Playable Codec format: “MP43”, “3IV1 “, “3IV2”

Press MENU to display the disc menu, if available.

DVD

DivX

VCD

Starting play from selected time

Searches for the starting point of entered time code. Press DISPLAY during

playback and select the time clock icon. Input the required start time in hours,

minutes, and seconds and press ENTER. If you enter the wrong number, press

CLEAR to enter again.

•

Playable Audio format: “AC3”, “PCM”, “MP3”

Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)

Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)

CD-R/RW, DVD R/RW Format: ISO 9660

DVD

Last Scene Memory

Maximum Files/Disc: Less than 999 (total number of files and folders)

This unit memorizes the last scene from the last disc that is viewed. The last

scene remains in memory even if you remove the disc from the player or switch

off(Stand-by mode) the unit. If you load a disc that has the scene memorized,

the scene is automatically recalled.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 17

ACD

MP3

WMA

DVD

Creating your own program

Watching a enlarged video image

You can play the contents of a disc in the order you want by arranging the order

of the music files on the disc. The program is cleared when the disc is removed.

During playback or pause mode, press ZOOM to enlarge the video image (3

steps). You can move through the zoomed picture using b B vV buttons. Press

CLEAR to exit.

Select a desired music file then press PROG./MEMO. or select “

press ENTER to add the music file to the program list. To add all music files on

the disc, select “ ” and then press ENTER. Select a music file from the pro-

“ and then

DVD

Slow down the playing speed

While playback is paused, press SCAN(bb or BB) to slow down, go forward or

reverse playback. You can change the various playback speed by pressing

SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal

speed.

gram list then press ENTER to start programed playback.To clear a music file

from the program list, select the music file you want to clear then press CLEAR

or select “

program list, select "

icon and then press ENTER. To clear all music files from the

”

" then press ENTER.

DVD

DivX

Marking a favorite scene

MP3

WMA

Displaying file information (ID3 TAG )

You can mark positions by pressing MARKER at the desired position for up to 9

markers. Also you can recall or clear positions by pressing SEARCH.

Use b or B to select a desired marker, then press ENTER to recall it or CLEAR

to clear it.

While playing an MP3 file containing file information, you can display the infor-

mation by pressing DISPLAY repeatedly.

MP3/WMA music file requirement

MP3/WMA compatibility with this unit is limited as follows:

• File extensions: “.mp3”, “.wma”.

• Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)

• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)

• CD-R/RW, DVD R/RW Format: ISO 9660

• Maximum Files/Disc: Less than 999 (total number of files and folders)

Screen Saver

The screen saver appears when you leave the unit in Stop mode for about five

minutes.

DVD

Repeating a specific portion (A-B)

Press REPEAT A-B at the beginning of the portion you wish to repeat and again

at the end of the portion. Your selected portion will be repeated continually.

To return to normal playback, press REPEAT A-B to select [OFF].

DVD

DivX

Hearing a different audio

During playback, press AUDIO ( ) repeatedly to switch between the available

audio languages or encoding methods.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 18

Viewing photo files

Listening to the radio

Be sure that both FM and AM aerials are connected.

ON REMOTE

1 Open the disc tray: (On unit: Z)

2 Insert a disc: (On unit)

OPEN/CLOSE

ON REMOTE

1 Turn the power on:

POWER

TUNER

TUN-/+

3 Close the disc tray: (On unit: Z)

4 Select a photo file:

OPEN/CLOSE

v V

2 Select either FM or AM:

3 Select a radio station:

5 Display the selected file in full screen:

6 To return to the menu:

ENTER

4 To ‘save’ a radio station:

A preset number will show in the display.

PROG/MEMO.

STOP

5 To select a ‘saved’ station input the preset

number:

Up to 50 radio stations can be saved.

Viewing photo files - more function

PRESET-/+

Viewing photo files as a slide show

6 To confirm press:

PROG/MEMO.

Use vV b B to highlight (

) icon then press ENTER to start slide show.

You can change slide show speed using b B when (

) icon is highlighted.

Listening to the radio - more function

Skip to the next/previous photo

Look for radio stations automatically

Press SKIP (. or >) to view the previous/next photo.

Press and hold TUN.-/TUN.+ for more than a second. The tuner will scan auto-

matically and stop when it finds a radio station.

Rotate a photo

Use vV b B to rotate the photo in full screen mode.

Choose a preset number for a radio station

When storing a radio station, the preset number can be chosen. When the play-

er automatically shows a preset number, press PRESET -/+ to change it. Press

PROG./MEMO. to save your chosen number.

Pause a slide show

Press PAUSE/STEP (X) to pause a slide show. Press PLAY (B) to continue the

slide show.

Delete all the saved stations

Photo file requirement

Press and hold PROG./MEMO for two seconds. ERASE ALL will flash up on the

DVD receiver display. Press PROG./MEMO to erase all saved radio stations.

JPEG file compatibility with this unit is limited as follows:

• File extensions: “.jpg”

• Photo size: Less than 2MB recommended

• CD-R/RW, DVD R/RW Format: ISO 9660

• Maximum Files/Disc: Less than 999 (total number of files and folders)

Improve poor FM reception

Press PAUSE (MONO/ST) on the front panel. This will change the tuner from

stereo to mono and usually improve the reception.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 19

USB device requirement

Listening to music from your

USB device

The advantage of connecting your portable USB player through the sys-

tem’s USB port is that the USB device can be controlled from the system.

•

Do not extract the USB device while in operation.

To prevent data loss, back up all data.

If you use a USB extension cable or USB hub, the USB device might not be

recognized.

•

A device using NTFS file system is not supported. (Only FAT (16/32) file sys-

tem is supported.)

•

The USB function of this unit does not support all USB devices.

Digital camera and mobile phone are not supported.

This unit does not supported more than 999 files.

If the connected USB device has two or more folders, a drive folder is dis-

played on the screen. If you want to move to the previous menu after you

select a folder, press RETURN.

Listening to music from your

portable player

The player can be used to play the music from many types of portable

players.

ON REMOTE

1 Connect the USB device to the unit

using a USB cable (not supplied).:

2 Select the USB function:

USB

v V

3 Select a file from the menu:

4 Start your music playing:

5 Before disconnecting the portable USB

device, change to any other function by

pressing:

DVD or TUNER

6 Remove the USB device:

Listening to music from your USB device -

more function

ON REMOTE

1 Connect the portable player by plugging the

unit into PORT. IN on the front of the player.:

Compatible USB Devices

•

Devices which require additional program installation when you have con-

nected it to a computer, are not supported.

MP3 Player : Flash type MP3 player.

2 Turn the power on:

POWER

AUX

3 Select the PORTABLE function:

The MP3 player requiring installation of a driver is not supported.

4 Turn the portable player on and start it

playing:

USB Flash Drive : Devices that support USB1.0 or USB1.1.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 20

Manufacturer

Code Number

Manufacturer

MONTGOMERY

WARD

NEC

NOBLEX

PACKARD BELL

PANASONIC

PHILCO

Code Number

01,06,08,09

23,24,32,33,34

01,08

07,11,13,25,35,36

01,06,07,08,09,

15,38,43,58

06,07,43,61,62,65

03,37,44

11,13

16,17,23

01,03,37,44,69

16,17,23

01,08,09,25,68

28,29

01,08

09,25,26,27,28,29

09,22,23,24,60,66

01,06,08,09,10,

23,24,33,34

12,62

Controlling your TV with

the supplied Remote

Control

You can control the sound level, input source, TV’s

ADMIRAL

AIWA

AKAI

AMARK

AOC

BELL & HOWELL

BROKSONIC

CANDLE

CCE

CENTURION

CINERAL

CITIZEN

CORONADO

CROWN

CURTIS MATHES

DAEWOO

DAYTRON

EMERSON

FISHER

16,33,37,44,45

18,19

channel and power switch of your LG TV with the

supplied remote control.

Controlling other TV’s with the remote control

PHILIPS

PIONEER

PORTLAND

PROSCAN

QUASAR

RADIO SHACK

RCA

REALISTIC

SAMPO

SAMSUNG

SANYO

You can control the sound level, input source, TV’s

channel and power switch of non-LG TVs as well. If

your TV is listed in the table, set the appropriate

manufacturer code. While holding down TV

POWER button, press the number buttons to select

the manufacturer code for your TV. Release TV

POWER button.

49,50,51,52,53,54,55

01,03,08,33,35,37,44

16,38,39,40,41,42,43

01,08

01,09,16,17,18,19

28,29

SCOTT

SEARS

SEMP

SHARP

FUNAI

46,47

GENERAL ELECTRIC

GRADIENTE

HITACHI

JC PENNEY

JVC

KIOTE

KMC

KTV

LG (GOLDSTAR)

LODGENET

LOGIK

LXI

MAGNAVOX

03,10,11,13,37,44

01,56,57,63,67

09,14,15,43

01,08,10,27,35

20,21,63,67

SIGNATURE 2000

SONY

SOUNDESIGN

SYLVANIA

01,04,05,06,07,

08,35,51

46,47

01,08,09,31

01,07,08,09,35,39,40

SYMPHONIC

TATUNG

TEKNIKA

TELERENT

THOMSON

YORX

07,09,16,33,51

09,33

09,24,25,26,27,28,29

01,02,04,05,06,

07,08,09,20,

34,35,43,51,61,62,65

TOSHIBA

WARDS

XR1000

01,25,26,27,64

01,06,08,09,10,33,34

MAJESTIC

MARANTZ

MEMOREX

MGA/MITSUBISHI

01,32

ZENITH

01, 02,33,59

01,08,32,34

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 21

Language Codes

Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.

Language

Afar

Afrikaans

Albanian

Ameharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Bengali; Bangla

Bhutani

Bihari

Breton

Code

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

9072

Language

Croatian

Czech

Danish

Dutch

English

Esperanto

Estonian

Faroese

Fiji

Finnish

French

Frisian

Galician

Georgian

German

Greek

Greenlandic

Guarani

Gujarati

Code

7282

6783

6865

7876

6978

6979

6984

7079

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

Language

Hausa

Hebrew

Hindi

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Code

7265

7387

7273

7285

7383

7378

7365

7165

7384

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Language

Lingala

Lithuanian

Macedonian

Malagasy

Malay

Malayalam

Maori

Marathi

Moldavian

Mongolian

Nauru

Nepali

Norwegian

Oriya

Code

7678

7684

7775

7771

7783

7776

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

Language

Quechua

Rhaeto-Romance 8277

Rumanian

Russian

Samoan

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Shona

Sindhi

Singhalese

Slovak

Slovenian

Spanish

Sudanese

Swahili

Swedish

Tagalog

Code

8185

Language

Tajik

Tamil

Telugu

Thai

Tonga

Turkish

Turkmen

Twi

Code

8471

8465

8469

8472

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

8279

8285

8377

8365

7168

8382

8372

8378

8368

8373

8375

8376

6983

8385

8387

8386

8476

Italian

Ukrainian

Urdu

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Korean

Kurdish

Laothian

Latin

Uzbek

Vietnamese

Volapük

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

Panjabi

Pashto, Pushto

Persian

Polish

Portuguese

Bulgarian

Burmese

Byelorussian

Chinese

Latvian, Lettish

Area Codes

Choose a area code from this list.

Area

Code

Area

Costa Rica

Croatia

Czech Republic

Denmark

Ecuador

Egypt

El Salvador

Ethiopia

Fiji

Finland

France

Germany

Great Britain

Greece

Code

Area

Code

Area

Maldives

Mexico

Monaco

Mongolia

Morocco

Nepal

Netherlands

Netherlands Antilles AN

New Zealand

Nigeria

Norway

Oman

Pakistan

Panama

Code

Area

Code

Area

Code

Afghanistan

Argentina

Australia

Austria

Belgium

Bhutan

Bolivia

Greenland

Hong Kong

Hungary

India

Indonesia

Israel

Italy

Jamaica

Japan

Kenya

Kuwait

Libya

Luxembourg

Malaysia

Paraguay

Philippines

Poland

Portugal

Romania

Russian Federation RU

Saudi Arabia

Senegal

Singapore

Slovak Republic

Slovenia

South Africa

South Korea

Spain

Sri Lanka

Sweden

Switzerland

Taiwan

Thailand

Turkey

Uganda

Ukraine

Brazil

Cambodia

Canada

Chile

China

Colombia

Congo

United States

Uruguay

Uzbekistan

Vietnam

Zimbabwe

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 22

Troubleshooting

CAUSE

CORRECTION

PROBLEM

No power

No picture

Plug the power cord into the wall outlet securely.

Select the appropriate video input mode on the TV so the pic-

ture from the DVD Receiver appears on the TV screen.

Connect the video cables securely to both the TV and DVD

Receiver.

The power cord is disconnected.

The TV is not set to receive the DVD signal.

The video cables are not connected securely.

Select the correct input mode of the audio receiver so you can

hear the sound from the DVD receiver.

Connect the audio cables into the connection terminals cor-

rectly.

There is little or no sound

Equipment connected via the audio cable is not set to

receive DVD signal output.

The audio cables are not connected to the speakers or

receiver securely.

Replace with a new audio cable.

Clean the disc using a soft cloth with outward strokes.

Insert a disc

The audio cables are damaged.

The disc is dirty.

No disc is inserted.

The DVD picture quality is poor

A DVD/CD will not play

Insert a playable disc (check the disc type, colour system

and regional code).

An unplayable disc is inserted.

Place the disc with the label or printed side facing

upwards.

The disc is inserted upside down.

Press SETUP to close the menu screen.

Enter your password or change the rating level.

The menu is open on screen.

There is a parental lock which prevents the playback of DVDs

with a certain rating.

Clean the disc using a soft cloth with outward strokes.

Move DVD receiver and audio components further away from

your TV.

Humming noise heard while a

DVD or CD is playing

The disc is dirty.

The DVD receiver is located too close to the TV, causing feed-

back.

Check the antenna connection and adjust its position.

Attach an external aerial if necessary.

Radio stations can’t be tuned in

properly

The antenna is positioned or connected poorly.

Tune to the station manually.

Preset some radio stations, see page 18 for details.

The signal strength of the radio station is too weak.

No stations have been preset or preset stations have

been.cleared(when tuning by scanning preset channels).

The remote is not pointed directly at the DVD receiver.

The remote is too far from the DVD receiver.

There is an obstacle in the path between the remote control

and the unit.

The remote control doesn’t

work well / at all

Point the remote directly at the unit.

Use the remote within 23 feet (7m) of the DVD receiver.

Remove the obstacle.

Replace the batteries with new ones.

The batteries in the remote control are flat.

Download from Www.Somanuals.com. All Manuals Search And Download.

HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 23

About the

Symbol Display

Types of Playable Discs

“

” may appear on your TV display during operation and indicates that the

Logo

Type

function explained in this owner’s manual is not available on that specific DVD

video disc.

DVD-VIDEO: Discs such as movies that can

be purchased or rented.

Regional Codes

DVD-R: Video mode and finalized only

This unit has a regional code printed on the rear of the unit. This unit can play

only DVD discs labeled same as the rear of the unit or “ALL”.

•

Most DVD discs have a globe with one or more numbers in it clearly visible

on the cover. This number must match your unit’s regional code or the disc

cannot play.

If you try to play a DVD with a different regional code from your player, the

message “Check Regional Code” appears on the TV screen.

DVD-RW: Video mode and finalized only

DVD VR format that have been finalized can not be

played in this unit

•

DVD+R: Video mode only

Supports the double layer disc also

Copyrights

DVD+RW: Video mode only

Video CD (VCD/SVCD):

Audio CD: