Kyocera Cell Phone TXLCC10042B User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

This is because the phone is designed to operate at

multiple power levels so as to use only the power

required to reach the network. In general, the closer

you are to a wireless base station antenna, the lower

the power output.

Before a phone model is available for sale to the

public, it must be tested and certified to the FCC that

it does not exceed the limit established by the

government-adopted requirement for safe exposure.

The tests are performed in positions and locations

(e.g., at the ear and worn on the body) as required

by the FCC for each model. The highest SAR values

for these model phones are:

FCC/IC Notice

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

To maintain compliance with FCC RF exposure

guidelines, if you wear a handset on your body,

use the Kyocera Wireless Corp. (KWC) supplied

and approved:

Phone Case Model: TXLCC10042B

Belt Clip Model: TXLCC10047B

Sport Clip Model: TXLCC10045B

AMPS/CDMA modes (Part 22) - Head: 1.37 W/kg;

Body-worn: 0.66 W/kg

PCS/CDMA mode (Part 24) - Head: 1.36 W/kg;

Body-worn: 0.47 W/kg

Other accessories used with this device for body-worn

operations must not contain any metallic components

and must provide at least 22.5 mm separation distance

including the antenna and the user’s body.

Body-worn measurements differ among phone

models, depending upon availability of accessories

and FCC requirements. The body-worn SAR values

provided above were obtained by using Kyocera

Wireless Corp. [KWC] supplied and approved:

Phone Case Model: TXLCC10042B

Belt Clip Model: TXLCC10047B

Sport Clip Model: TXLCC10045B

While there may be differences between

the SAR levels of various phones and at various

positions, they all meet the government requirement

for safe exposure.

THIS MODEL PHONE MEETS THE GOVERNMENT’S

REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver.

It is designed and manufactured not to exceed the

emission limits for exposure to radio frequency (RF)

energy set by the Federal Communications

Commission of the U.S. Government. These limits are

part of comprehensive guidelines and establish

permitted levels of RF energy for the general

The FCC has granted an Equipment Authorization for

this model phone with all reported SAR levels

evaluated as in compliance with the FCC RF emission

guidelines. SAR information on this model phone is

on file with the FCC and can be found under the

Display Grant section http://www.fcc.gov/oet/fccid

after searching on the FCC ID: OVFKWC-K4X4

Additional information on SAR can be found on the

Cellular Telecommunications and Internet Association

(CTIA) web-site at

population. The guidelines are based on standards that

were developed by independent scientific

organizations through periodic and thorough

evaluation of scientific studies. The standards include a

substantial safety margin designed to assure the safety

of all persons, regardless of age and health. The

exposure standard for wireless mobile phones

employs a unit of measurement known as the Specific

Absorption Rate, or SAR. The SAR limit set by the

FCC is 1.6 W/kg.* Tests for SAR are conducted using

standard operating positions specified by the FCC with

the phone transmitting at its highest certified power

level in all tested frequency bands. Although the SAR

is determined at the highest certified power level, the

actual SAR level of the phone while operating can be

well below the maximum value.

http://www.wow-com.com.

* In the United States and Canada, the SAR limit for

mobile phones used by the public is 1.6 watts/kg (W/

kg) averaged over one gram of tissue. The standard

incorporates a substantial margin of safety to give

additional protection for the public and to account for

any variations in measurements.

User Guide for Kyocera Phantom Phones

iii

Download from Www.Somanuals.com. All Manuals Search And Download.

Other medical devices—If you use any other

personal medical device, consult the manufacturer

of the device to determine if it is adequately shielded

from external RF energy. Your physician may be

able to help you obtain this information.

Caution

The user is cautioned that changes or modifications

not expressly approved by the party responsible for

compliance could void the warranty and user’s

authority to operate the equipment.

In health care facilities—Turn your phone off in

health care facilities when instructed. Hospitals and

health care facilities may be using equipment that is

sensitive to external RF energy.

Optimize your phone’s performance

Use the guidelines on page 1 to learn how to optimize

the performance and life of your phone and battery.

Potentially unsafe areas

Posted facilities—Turn your phone off in any facility

when posted notices require you to do so.

Air bags

If you have an air bag, DO NOT place installed or

portable phone equipment or other objects over the

air bag or in the air bag deployment area. If

equipment is not properly installed, you and your

passengers risk serious injury.

Aircraft—FCC regulations prohibit using your phone

on a plane that is in the air. Turn your phone off

before boarding aircraft.

Vehicles—RF signals may affect improperly installed

or inadequately shielded electronic systems in motor

vehicles. Check with the manufacturer of the device

to determine if it is adequately shielded from external

RF energy. Your physician may be able to help you

obtain this information.

Medical devices

Pacemakers—Warning to pacemaker wearers:

Wireless phones, when in the ‘on’ position, have

been shown to interfere with pacemakers. The

phone should be kept at least six (6) inches away

from the pacemaker to reduce risk.

Blasting areas—Turn off your phone where blasting

is in progress. Observe restrictions, and follow any

regulations or rules.

The Health Industry Manufacturers Association and

the wireless technology research community

recommend that you follow these guidelines to

minimize the potential for interference.

Potentially explosive atmospheres—Turn off your

phone when you are in any area with a potentially

explosive atmosphere. Obey all signs and

instructions. Sparks in such areas could cause an

explosion or fire, resulting in bodily injury or death.

•

Always keep the phone at least six inches

(15 centimeters) away from your pacemaker

when the phone is turned on.

•

Do not carry your phone near your heart.

Use the ear opposite the pacemaker.

Areas with a potentially explosive atmosphere are

often, but not always, clearly marked. They include:

If you have any reason to suspect that

interference is taking place, turn off

your phone immediately.

•

fueling areas such as gas stations

below deck on boats

transfer or storage facilities for fuel or chemicals

vehicles using liquefied petroleum gas, such as

propane or butane

Hearing aids—Some digital wireless phones

may interfere with hearing aids. In the event of

such interference, you may want to consult your

service provider or call the customer service line

to discuss alternatives.

•

areas where the air contains chemicals or

particles such as grain, dust, or metal powders

any other area where you would normally be

advised to turn off your vehicle engine

Download from Www.Somanuals.com. All Manuals Search And Download.

•

NCRP Report 86 (National Council on Radiation

Protection and Measurements, 1986)

Use with care

Use only in normal position (to ear). Avoid dropping,

hitting, bending, or sitting on the phone.

ICNIRP (International Commission on Non-

Ionizing Radiation Protection, 1996)

Keep phone dry

Your phone complies with the standards set by these

reports and the FCC guidelines.

If the phone gets wet, turn the power off immediately

and contact your dealer. Water damage may not be

covered under warranty.

E911 Mandates

Where service is available, this handset complies

with the Phase I and Phase II E911 Mandates issued

by the FCC.

Resetting the phone

If the screen seems frozen and the keypad does not

respond to keypresses, reset the phone by

completing the following steps:

Battery and charger specifications

1. Remove the battery door.

2. Remove and replace the battery.

If the problem persists, return the phone to the

dealer for service.

Charger

Input

Output

CV90-60858-01 100-240 VAC / 50/60

4.5 V 1.5 A

Accessories

CV90-60859-1 120 VAC / 60 Hz

5.2 V 400

Use only Kyocera-approved accessories with

Kyocera phones. Use of any unauthorized

accessories may be dangerous and will invalidate the

phone warranty if said accessories cause damage or

a defect to the phone.

Standard Battery: CV90-K3040 3.7V / 900mAh

Customer support

Your service provider’s customer support department

may be accessible directly from your phone when

you dial a number such as *611. They can answer

questions about your phone, phone bill, call coverage

area, and specific features available to you, such as

call forwarding or voicemail.

To shop online for a Hands-free Car Kit and other

phone accessories, visit www.kyocera-wireless.com/

store.

To order by phone, call (800) 349-4188 (U.S.A. only)

or (858) 882-1410.

For questions about the phone features, refer to the

materials provided with your phone, or visit

www.kyocera-wireless.com.

Radio Frequency (RF) energy

Your telephone is a radio transmitter and receiver.

When it is on, it receives and sends out RF energy.

Your service provider’s network controls the power of

the RF signal. This power level can range from 0.006

to 0.6 watts.

For additional questions, you may contact the

Kyocera Wireless Corp. Customer Care Center in

one of the following ways:

In August 1996, the U.S. Federal Communications

Commission (FCC) adopted RF exposure guidelines

with safety levels for hand-held wireless phones.

These guidelines are consistent with the safety

standards previously set by both U.S. and

•

Web site: www.kyocera-wireless.com

Email: [email protected]

Telephone: 1-800-349-4478 (U.S. and Canada)

or 1-858-882-1401.

Customer support phone numbers are also

available in the following countries.

international standards bodies in the following reports:

•

ANSI C95.1 (American National Standards

Institute, 1992)

Argentina:

0-800-666-0052

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

Become a product evaluator

Australia:

Brazil:

800-507-000

To participate in the testing and evaluation of

Kyocera Wireless Corp. products, including cellular

or PCS phones, visit beta.kyocera-wireless.com.

0-800-55-2362

800-43-1212

Chile:

Colombia

India:

01-800-700-1546

Toll free: 1-600-121214

Toll: 0124-284-5000

093 453 037

Mexico:

001-866-650-5103

Kyocera Wireless Corp.

10300 Campus Point Drive, San Diego, CA 92121

U.S.A.

New Zealand: 0-800-990-100

Panama:

Peru:

001-800-201-1984

0-800-51-934

Visit us at www.kyocera-wireless.com

To purchase accessories, visit

www.kyocera-wireless.com/store

Puerto Rico:

Venezuela:

1-866-664-6443

0-800-100-2640

Before requesting support, please try to reproduce

and isolate the problem. When you contact the

Customer Care Center, be ready to provide the

following information:

•

The name of your service provider.

The actual error message or problem

you are experiencing.

•

The steps you took to reproduce the problem.

The phone’s electronic serial number (ESN).

To find the ESN select Menu → Phone Info.

Qualified service

If the problem with your phone persists, return the

phone with all accessories and packaging to the

dealer for qualified service.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

Calling using voice tags . . . . . . . . . . . . . . . . . . . 37

Using voice features with

hands-free car kits. . . . . . . . . . . . . . . . . . . . . . . 38

Training voice recognition . . . . . . . . . . . . . . . . . 39

Getting Started. . . . . . . . . . . . . . . . . . . . . . 1

Charging the battery . . . . . . . . . . . . . . . . . . . . . . .1

Using menus . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Making and Answering Calls . . . . . . . . . . 6

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Calling emergency services. . . . . . . . . . . . . . . . . .7

Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Setting up voicemail . . . . . . . . . . . . . . . . . . . . . . .9

Silencing an incoming call . . . . . . . . . . . . . . . . .10

Locking the keypad . . . . . . . . . . . . . . . . . . . . . .10

Using Tools . . . . . . . . . . . . . . . . . . . . . . . 40

Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Alarm Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

World Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Entering Letters, Numbers,

and Symbols . . . . . . . . . . . . . . . . . . . . . . 13

Media Gallery / Fun & Games . . . . . . . . . 43

Tetris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Brick Attack. . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Doodler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

My Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

My Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Storing Contacts . . . . . . . . . . . . . . . . . . . 16

Saving a contact entry. . . . . . . . . . . . . . . . . . . . .16

Editing or erasing a contact . . . . . . . . . . . . . . . .17

Finding contact information . . . . . . . . . . . . . . . .18

Sending and Receiving

Text Messages . . . . . . . . . . . . . . . . . . . . . 20

Sending text messages . . . . . . . . . . . . . . . . . . . .20

Retrieving text messages. . . . . . . . . . . . . . . . . . .23

Customizing message settings. . . . . . . . . . . . . . .25

10 Connecting to the Internet . . . . . . . . . . . 47

Using the Web Browser . . . . . . . . . . . . . . . . . . . 47

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Customizing Your Phone . . . . . . . . . . . . 27

Silencing all sounds . . . . . . . . . . . . . . . . . . . . . .28

Choosing a different ringer. . . . . . . . . . . . . . . . .28

Adjusting volume . . . . . . . . . . . . . . . . . . . . . . . .29

Using shortcuts . . . . . . . . . . . . . . . . . . . . . . . . .29

Personalizing the screen . . . . . . . . . . . . . . . . . .30

Creating a secure environment. . . . . . . . . . . . . .33

Setting message alerts . . . . . . . . . . . . . . . . . . . .34

Network settings. . . . . . . . . . . . . . . . . . . . . . . . .35

Data settings. . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Setting position location. . . . . . . . . . . . . . . . . . .36

Using Voice Recognition . . . . . . . . . . . . 37

Setting up voice dialing . . . . . . . . . . . . . . . . . . .37

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

vii

Download from Www.Somanuals.com. All Manuals Search And Download.

GETTING STARTED

Your phone comes with a removable lithium ion

(LiIon) battery. Fully charge the battery before

using the phone.

Charging the battery

You must have at least a partial charge in the

battery to make or receive calls.

To charge the battery, connect

the AC adapter to the jack on

the lower right side of the

phone, then plug the adapter

into a wall outlet.

Installing the battery

1. Hold the phone facing

away from you.

2. Use your fingernail to

pull the circular latch

toward the bottom of the

phone and pull the

The battery icon in the upper-right corner of the

screen tells you whether the phone is:

•

Charging (the icon is animated)

Partially charged

battery door away.

3. Place the battery in

the phone casing with

the metal contacts

toward the top of

the phone.

fully charged

Recharging the battery: You can safely recharge the

battery at any time, even if it has a partial charge.

Caring for the battery

General safety guidelines

4. Place the battery door notches in the openings

near the bottom of the phone.

•

Do not take apart, puncture, or short-circuit

the battery.

5. Press the circular latch

until it clicks.

If you have not used the battery for more than a

month, recharge it before using your phone.

Avoid exposing the battery to extreme

temperatures, direct sunlight, or high humidity.

Never dispose of any battery in or near a fire. It

could explode.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

Common causes of battery drain

Performing basic functions

Turn the phone on: Press

hourglass icon appears.

•

Playing games

Using the Web

Keeping backlighting on

Operating in analog ( ) mode. Your phone

switches between modes to find the best signal.

To set your phone to operate in a single mode,

select Menu → Settings → Network →

Digital or Analog.

and wait until the

Turn the phone off: Press and hold

phone beeps or the screen goes blank.

until the

Make a call: Enter the number and press

End a call: Press

(the red key).

(the green key).

and follow

Answer a call: Press

Access voicemail: Press and hold

•

Operating in digital mode when far away from a

base station or cell site.

Using data cables or accessories, such as the

Hands-free headset.

Operating when no service is available, or

service is available intermittently.

the system prompts. Contact your service provider

for details about their voicemail system.

Verify your phone number:

Select Menu → Phone Info. Press

scroll through information.

down to

Silence the ringer: Press

, then

to answer.

left.

down.

right.

•

High earpiece and ringer volume settings.

Repeating sound, vibration or lighted alerts.

Lock the keypad: Press and hold

Access a contacts list: Press

Silence all sounds: Press and hold

Access your shortcuts: Press

up.

Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting to know your phone

Jack for Hands-free Headset (sold separately) only.

Home screen. Press (item 3) to select Menu.

OK key selects a menu item or option.

Send/Talk key starts or answers a call.

Navigation key scrolls through lists and positions cursor.

Also accesses shortcuts from the home screen.

Keypad for entering numbers, letters, or symbols.

* Text key changes the text mode in text entry.

Antenna (does not extend)

Clear key erases the last character in text entry, or

returns to the previous menu.

End/Power key turns the phone on or off, ends a call, or

returns you to the home screen.

Jack for AC adapter (included).

Space # key enters a space during text entry.

0 Next key cycles through word choices during text entry.

Warning: Inserting an accessory into the incorrect jack

will damage the phone.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

Using menus

The contents of the main menu are as follows:

Recent Calls

Incoming Calls

Outgoing Calls

Missed Calls

Erase Lists

Contacts

View All

Add New

Messages

Voicemail

Send New*

InBox

Net Alerts*

OutBox*

Saved Msgs

Group Lists*

Erase Msgs

Msg Settings

Settings

Silent Mode

Keyguard

Sounds

Display

Voice Services

Security

Call Information

Network

Convenience

Msg Settings

Accessories

Fun & Games*

Tetris

Phone Info

Your Phone Number

ESN

Icon Key

(Scroll down to view

Brick Attack^TM

Doodler^TM

My Sounds

My Pictures

Tools

information.)

Web Browser

Connects to Internet

Scheduler

Find Name

Alarm Clock

Tip Calculator

Calculator

World Clock*

Timer

Add Voice Dial

Speed Dial List

Voice Dial List

Business List

Personal List

Information

Stopwatch

* Not available on all phones. Check with your service provider.

•

From the home screen, press

select Menu.

** To change the way the menus appear, select

Menu → Settings→ Display → MainMenuView,

then select either Graphic or List and press

Press

left, right, up, or down to see menus.**

to select a menu or menu item.

In this guide, an arrow → tells you to select an

optionfromamenu. Forexample, Menu → Settings

means select Menu, then select the Settings option.

•

Press

up or down to view menu items.

to back up a menu level.

to return to the home screen.

Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

The phone is sending or receiving high-

speed data.

The phone is sending or receiving medium-

speed data.

The phone is sending or receiving

standard-speed data.

Understanding screen icons

These icons may appear on your phone’s screen.

The phone is operating in IS2000 (1X)

digital mode.

The phone is operating in IS95 digital mode.

High-speed data service is available, but the

phone is dormant.

The phone is operating in Analog

(FM) mode.

The phone is receiving a signal. You can

make and receive calls. Fewer bars indicate

a weaker signal.

The phone is at the home screen. To

access the menus, press

Keyguard is on. The keypad is locked.

A call is in progress.

The phone is set to light up instead of ring.

The phone is not receiving a signal. You

cannot make or receive calls.

The phone is set to vibrate or to vibrate and

then ring.

The phone is roaming outside of its home

service area.

You have a text message, voicemail, or page.

Position location is set to your service

provider and to emergency services.

Position location is set to emergency

services only.

(

indicates an urgent text message,

voicemail, or page.)

The battery is fully charged. The more

black bars, the greater the charge.

The alarm clock is set.

The phone is in privacy mode or is

accessing a secure Web site.

High-speed (3G) data service is available

and active on your phone. Check with your

service provider for availability.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

MAKING AND ANSWERING CALLS

For more about finding contact information,

see page 18.

Making a call

1. Make sure you are in an area where the signal

Tip: To call a saved number using your phone’s

voice recognition feature, see “Calling using voice

tags” on page 37.

can be received. Look for the

the home screen.

symbol on

Note: The more bars you see in this symbol, the

clearer the reception will be. If there are no bars,

try to move to where the reception is better. If

your phone cannot locate a signal for 15

minutes, it changes to Power Save mode. If you

see the text “Power Save Mode” and on the

screen, press any key to return to normal

operating mode.

Answering a call

When a call comes in, the phone rings, vibrates,

or lights up (depending on your settings), and a

dancing phone icon appears. The phone number of

the caller also appears if it is not a restricted

number. If the number is stored in your Contacts

directory, the contact name appears.

2. Enter the phone number.

•

To answer the call, press

3. Press

If you do not wish to answer the call, select

4. Press

to end the call.

Silence or Ignore and press

. Silence mutes

the ringer. Ignore mutes the ringer and returns

you to the screen that was active at the time the

call came in. Both actions will send the caller to

voicemail if you do not pick up the call.

Redialing a number

To redial the last number called, press

If you see a message prompting you to speak a

name, press again.

twice.

Calling a saved number

If you have already saved a phone number, you can

use the contacts list to find it quickly.

Silencing an incoming call

•

To silence an incoming call quickly, press

Then press to answer the call.

1. Press

saved contacts.

2. Scroll down the list, find the contact you want,

and press to dial the number.

down. This brings up a list of all

This action silences the current call only. The next

call will ring as normal.

Making and Answering Calls

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting the volume during a call

To adjust the earpiece volume during a call, press

up or down.

Dealing with missed calls

When you have missed a call, “Missed Call” appears

on your screen unless the caller leaves a voicemail.

•

Press

to clear the screen.

Calling emergency services

To view the caller’s number or name, select

Calls. In the Recent Calls list, the missed call is

indicated with a flashing

Note: Regardless of your 3-digit emergency code

(911, 111, 000, 999, etc.), your phone will operate

as described below.

•

If the caller left a voicemail message, select Call.

•

Dial your 3-digit emergency code and press

Setting missed call alerts

You can set an alert to beep every five minutes after

you have missed a call.

You can call the code even if your phone is locked

or your account is restricted. When you call, your

phone enters Emergency mode. This enables the

emergency service exclusive access to your phone

to call you back, if necessary. To make or receive

regular calls after dialing the code, you must exit

this mode.

•

Select Menu → Settings → Sounds →

Missed Call → Enabled.

To turn off the alert when it rings, press

To cancel the alert, select Menu → Settings →

Sounds → Missed Call → Disabled.

To exit Emergency mode

When you have completed the emergency call:

Viewing recent call details

1. Press

to select Exit.

Details on the last 29 calls you made or received

are stored in the Recent Calls list. You can get

details on the caller’s name and phone number,

along with the time and length of the call. Icons

indicate the types of calls in the list.

2. Press

again to confirm your choice.

Note: To determine who has access to your

location, see “Setting position location” on

page 36.

Outgoing call

Forwarded call

Three-way call

Incoming call

Missed call (flashing)

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing recent calls

1. Select Menu → Recent Calls.

Erasing recent calls

1. Select Menu → Recent Calls → Erase Lists.

2. Select a list: Incoming Calls, Outgoing Calls,

2. Select an option: Incoming Calls, Outgoing

or Missed Calls.

Calls, Missed Calls, or Erase All.

3. Select a recent call item.

3. Press

right and press

to select Yes.

4. Select an option:

Speed dialing

–

Time—Show the time of the call.

Speed dialing allows you to quickly dial a stored

phone number by entering a one- or two-digit

speed dialing location number and pressing

Number—Show the caller’s number (for an

incoming call), or the number you called

(for an outgoing call).

Note: Before you can use speed dialing, you must

save a phone number as a contact and assign a

speed dial location to it.

–

Prepend—Place the cursor at the beginning

of the phone number so you can add an

area code, if you plan to save the number as

a contact.

•

To save a phone number as a new contact and

add a speed dial location, see “Saving a contact

entry” on page 16.

Save New or View Contact—Save the phone

number as a contact or view a contact that

has been saved.

•

To add a speed dial location to a saved contact,

see “Editing or erasing a contact” on page 17.

–

Add to—Add the phone number to a

saved contact.

Using speed dialing

To call a contact that has a speed dial location:

View Contact—Show details on the contact

if the caller’s information is already in your

Contacts directory.

•

From the home screen, enter a one- or two-

digit speed dialing location and press

Note: If the phone number has been classified as

“secret,” you must enter your four-digit lock code

to view or edit it. For information on the lock code,

see “Changing your lock code” on page 33. To

classify a phone number as secret, see “Saving a

contact entry” on page 16.

Making and Answering Calls

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: Contact your service provider to set up your

password and personal greeting.

1-Touch Dialing

1-Touch Dialing is the fastest way to speed dial a

contact that has a speed dial location.

Checking voicemail messages

Note: You must (1) enable 1-Touch dialing on your

phone and (2) have a speed dial location assigned to

a contact. To assign a speed dial location to a contact

see “Saving a contact entry” on page 16 or “Editing

or erasing a contact” on page 17.

When a voice message is received, your screen will

display a message: “New Message [x] Voicemail.”

This text will remain for about five minutes. After

that, look for the

symbol at the top of your

screen. The symbol flashes if the message is urgent.

If you see “New Message” on your screen

Enabling 1-Touch dialing

1. Select Menu → Settings → Convenience →

1. Press

to select Call. This initiates a call to

your voicemail number.

1-Touch Dialing → Enabled.

2. Follow the prompts to retrieve the message.

For specific information on getting voicemail

messages, contact your service provider.

2. Press

Using 1-Touch Dialing

To call a contact that has a speed dial location:

If you see the

1. Press

symbol

to initiate a call to your voicemail

•

From the home screen, press and hold a speed

dialing location. If it is a two-digit location,

press the first digit briefly, then press and hold

the second digit. For example, if the speed

number.

2. Follow the prompts to retrieve the message.

Note: You can set the phone to beep, light up, or play

a tune every five minutes to remind you that you have

voicemail. See “Setting message alerts” on page 34

and “Setting backlighting to flash” on page 32.

dialing location is 15, press

press and hold

briefly, then

Setting up voicemail

Before your phone can receive voicemail messages,

you must set up a password and record a personal

greeting with your service provider. When you have

set up your voicemail, all unanswered calls to your

phone are automatically transferred to voicemail,

even if your phone is in use or turned off.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

Silencing an incoming call

•

Tracking calls

You can track the number and duration of calls

made and received on your phone.

To silence an incoming call quickly, press

Then press to answer the call.

This action silences the current call only. The next

call will ring as normal.

1. Select Menu → Settings → Call Information.

2. Select a timer:

–

Recent Calls—Tracks all calls you have made

and received since you last reset this timer.

Adjusting the volume during a call

•

To adjust the earpiece volume during a call,

press up or down.

–

All Calls Timer—Tracks all calls you have

made and received. This timer cannot be reset.

Locking the keypad

The Keyguard locks your keypad to prevent

accidental key presses when the phone is turned on

and a call is not in progress. You can still answer or

silence an incoming call.

3. To reset a timer, highlight Reset and press

Timing your calls

You can set your phone to beep 10 seconds before

each minute passes when you are on a call.

•

Select Menu → Settings → Sounds →

Minute Alert → Enabled.

•

To lock the keypad from the home screen,

press left and hold.

•

To unlock the keypad, press

in this order.

Receiving data or faxes

Your phone may be able to receive certain data or

faxes, depending on the system sending the

information. You cannot receive voice calls while

the phone is in data/fax mode. For more

Changing the keyguard setting

1. Select Menu → Settings → Keyguard.

2. Highlight an option. You can set the phone to

lock the keypad immediately, or automatically if

no key is pressed after 30 seconds, 1 minute, or

5 minutes.

information, see “Data settings” on page 35.

3. Press

to save.

Making and Answering Calls

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Call Guard to avoid roaming calls

You can set your phone to warn you before you

answer or place a call while roaming.

Setting roaming alerts and

ringers

Setting an alert for roaming

You can set your phone to alert you with beeps when

you roam outside of your home service area.

•

Select Menu → Settings → Convenience →

Call Guard → Call prompt.

The phone makes a distinctive ring to indicate an

incoming call while you are roaming, and you must

1. Select Menu → Settings → Network →

press

to accept the call or to place a call

Roam/Svc Alert.

while roaming.

2. Select an option and press

–

When no svc alerts you with three tones

Controlling network roaming

decreasing in pitch when service is lost and

three tones increasing in pitch when service

is acquired again.

Specifying digital or analog mode

You may force the phone into either digital or

analog mode. This is useful if you are in an area

that borders on digital service and the automatic

feature is causing the phone to keep switching

between modes.

Roam Change alerts you with two

decreasing tones when roaming service is

acquired and three increasing tones when

home area service is acquired again.

1. Select Menu → Settings → Network →

Any Change alerts you with three

increasing tones if there is a change in

roaming service or three decreasing tones

if the phone loses service.

Digital/Analog.

2. Select an option and press

–

Automatic automatically switches the phone

between digital and analog.

Setting the roam ringer

You can set a ringer to indicate when an incoming

call will be subject to roaming charges.

Analog only sets the phone to work in

analog mode only.

Analog call forces a call into analog mode

for the duration of the next call.

1. Select Menu → Settings → Sounds →

Roam Ringer.

Digital only sets the phone to work in digital

2. Highlight Enabled and press

. You’ll hear a

sample of the ringer.

mode only.

3. Press

to set the ringer.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

Turning roaming on or off

This setting allows you to control the phone’s

roaming feature by specifying which signals the

phone will accept.

1. Select Menu → Settings → Network →

Roam Option.

2. Select an option and press

–

Automatic (recommended setting) accepts

any system the phone service provides.

–

No Roaming prevents you from making

or receiving calls outside of your home

service area.

Note: If your phone has more than one setting for

Automatic, contact your service provider to

determine which one to use.

Making and Answering Calls

Download from Www.Somanuals.com. All Manuals Search And Download.

ENTERING LETTERS, NUMBERS, AND SYMBOLS

You can enter letters, numbers, and symbols in

contacts, text messages, and your banner.

Entering numbers

•

To enter a number while in

number key once.

mode, press a

or mode,

Understanding text entry screens

The current text entry mode (and capitalization

setting, when applicable) are indicated by icons.

•

To enter a number while in

press and hold a number key until the number

appears on the screen.

Entering words letter by letter

Use normal text mode to enter letters.

text entry

field

1. Press a key once for the first letter, twice for the

second letter, and so on. If your phone is set to

Spanish, French, or Portuguese, accented

letters are available.

capitalization setting

text entry mode

2. Wait for the cursor to move right and enter the

Text entry modes

There are four text entry modes:

Number mode

next letter.

Entering words quickly

When you press a series of keys using

mode,

Normal text mode

checks its dictionary of common words and

guesses at the word you are trying to spell.

Rapid text entry mode

Symbol mode

1. For each letter of the word you want, press the

Note: The mode you start in depends on the task

you are doing. For example, when entering a phone

number, you’re in number mode. When entering a

name for a contact, you’re in normal text mode.

key once. For example, to enter the word “any”

press:

→

2. If the word doesn’t match what you want, press

to look at other word matches.

3. When you see the word you want, press

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

Entering symbols

While entering text, you can enter symbols

Capitalization settings

Three capitalization settings are available in

and

modes:

by pressing

until you see the symbol you

want. Using this method, you have access to the

following symbols:

Capitalize next letter

Lower case next letter

@ ?

To access the full set of symbols:

1. Press right to highlight the current mode

and press to enter the menu.

Symbols.

down to view the list of symbols.

–

’

Capitalize first letter of every word (in a

contact) or sentence (in a text message)

If no icon appears, all letters will be in lower case.

To change capitalization settings:

Press

2. Select

•

until the icon for the setting you

3. Press

want appears.

4. Press the number key corresponding to the

symbol you want.

Changing modes

Sometimes you need to change modes. For

example, to enter numbers in an email address

while in

mode, you must change to

mode, enter the numbers, and then change

back to

mode to complete the address.

To change text entry modes, you can either:

•

Press and hold

you want appears.

-or-

until icon for the mode

•

Press

right to highlight the current text

mode, press

to enter the menu, then select

a different mode.

Entering Letters, Numbers, and Symbols

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick reference to text entry

This table gives general instructions for entering letters, numbers, and symbols.

To...

Do this...

Use

mode and press a key until you see the letter you

Enter a letter

want. For more information, see page 13.

Use mode and press a key once to enter its number.

For more options, see page 13.

Use mode and press

you want. See page 14.

Enter a number

Enter a symbol

until you find the symbol

Enter a space

Press

Erase a character

Erase all characters

Press and hold

Press up or down.

Press and hold

Move the cursor right or left

Change text entry modes

Capitalize the next letter

Lower case the next letter

Capitalize the first letter of each word

mode, press

. Choose

mode, press

left or right.

Highlight an option at the bottom of

the screen

Press

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

STORING CONTACTS

Use your phone’s Contacts directory to store

information about a person or company. Your phone

can hold, on average, about 200 phone numbers.

–

Assign Picture or Unassign Picture—Select

or remove a picture to identify an incoming

call from this contact.

–

Save—Save the information.

Saving a contact entry

To save a contact, take these steps.

Number Type—Select work, home, mobile,

pager, or fax. The number type will appear

as an icon next to the number in the

Contacts list.

1. From the home screen, enter the phone

number you want to save.

Tip: Enter the area code with the phone number

so that you can dial it from any service area.

–

Add Voice Dial—Speak the name of the

contact person for this number so that you

can dial it using voice recognition (VR). For

more information, see page 37.

Note: To save a contact without entering a

phone number, select Menu → Contacts → Add

New, select an option, and skip to step 3.

–

Speed Dialing—Select a speed dialing

location from the list.

2. Press

to select Save New.

Secret—Select Yes to lock the phone

number. If a phone number is locked, you

must enter your four-digit lock code (see

page 33) to view or edit the number.

3. Enter a name for the contact. If you need to

learn how to enter letters, see page 13.

Either save the contact now or assign options.

To save now, press

-or-

to select Save.

–

Primary Number—Classify this number as

the primary number for the contact.

To assign options, press

right twice, then

Classify Contact—Classify the contact as

Personal or Business. (See page 29 to set

the phone to ring differently for personal

and business calls.)

press

to select Options. Press up or

down to highlight an option:

–

Assign Ringer or Unassign Ringer—Select

or remove a ringer to identify an incoming

call from this contact.

4. Press

to select Save. A check mark and the

word “Saved” appear.

Storing Contacts

Download from Www.Somanuals.com. All Manuals Search And Download.

–

Assign Picture or Unassign Picture to select

or remove a picture to identify an incoming

call from this contact.

Adding a code or extension

When you save the phone number of an automated

service, you may include a pause where your phone

would stop dialing; for example, where you would

wait to dial an extension.

–

Erase Contact to erase the entire contact.

Edit Name of the contact.

1. Enter the first portion of the phone number.

Classify Contact as personal or business.

2. Press

right to scroll through the options at

6. Enter the new information.

7. Press to select Save.

the bottom of the screen.

3. Press

to select a type of pause.

Editing a phone number

1. Select Menu → Contacts.

2. Select View All or Find Name to find the contact

–

Time Pause—Stops dialing for two

seconds, then continues to dial.

–

Hard Pause—Stops dialing until you

select Release.

you want to edit.

4. Enter the remaining numbers.

3. Highlight the contact to edit and press

4. Press down to highlight the phone number

you want to edit and press

5. Highlight an option for the phone number and

press

5. Select Save New.

Editing or erasing a contact

To make changes to a contact, take these steps.

(Toerase all saved contacts, see page 34.)

–

Send Text Msg—Send a text message to the

phone number you selected.

1. Select Menu → Contacts.

2. Select View All or Find Name to find the contact

View Number—See the phone number you

selected.

you want to edit.

3. Highlight the contact to edit and press

Add Voice Dial—Speak the name of the

contact person for this number so that you

can dial it using voice recognition (VR). For

more information, see page 37.

4. Select Options.

5. Highlight an option and press

to select it:

–

Add New to add a number, address, or note.

–

Speed Dialing—Assign or remove the

Assign Ringer or Unassign Ringer to select

or remove a ringer to identify an incoming

call from this contact.

location you use to speed dial the number.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

–

Edit Type—Assign a type: work, home,

mobile, pager, or fax. The type icon appears

next to the phone number in the Contacts list.

Checking the Frequent List or the

All Contacts list

From the home screen, press

down to see the

–

Erase Number—Erase the number from

the contact.

last 15 of your most frequently called contacts (if

you have enabled the Frequent List setting). You also

see the All Contacts list if you scroll down past the

double line.

Erase Voice Dial—Erase the voice dial

name associated with the number.

–

Edit Number—Change the phone number.

To enable the Frequent List setting

Edit Voice Dial—Record a new voice

dial name.

•

Select Menu → Settings → Convenience →

Frequent List → Enabled.

–

Secret—Make the number secret so that it

will not appear on the screen until the lock

code is entered. Secret numbers can be

called without a lock code. (For more

information, see “Restricting calls” on

page 34.)

Searching the Contacts directory

1. Select Menu → Contacts.

2. Select a search method:

–

View All—List all saved contacts.

Add New—Add new contacts.

–

Primary Number—Make this number the first

one that shows up when you open the contact.

Find Name—Locate a specific name. Enter

part of the contact name, then select Find.

Prepend—Move the cursor to the

beginning of the number so you can add the

area code.

–

Add Voice Dial—Speak the name of the

contact person for this number so that you

can dial it using voice recognition (VR).

–

Exit—Exit without making changes.

Speed Dial List, Voice Dial List, Business

List, or Personal List—Select a contact

from a list.

6. Enter the new information and follow the prompts.

7. Press to select Save, if necessary.

3. Scroll down until you find the name you want,

then press

Finding contact information

To find a phone number or contact, either (1)

check the frequent contacts list, (2) search the

Contacts directory, or (3) use Fast Find.

–

To call the contact, highlight the number

and press

To display contact information, press

–

Storing Contacts

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Fast Find

With Fast Find, you press one or two keys to view

close matches of the number you are looking for.

Viewing contacts

The following icons may appear next to information

in your Contact entries.

•

From the home screen,

select Menu → Settings → Convenience →

Fast Find → Enabled.

work

home

mobile

pager

fax

email address

street address

Web page URL

Note

Using Fast Find

1. From the home screen, press the keys

corresponding to the letters of the name you

want to find. A matching contact or speed dial

entry appears. Press

matching entries.

down to scroll through

2. View the name you want, then press

to call

the number or press to view contact details.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

SENDING AND RECEIVING TEXT MESSAGES

This chapter describes how to send, receive, and

erase text messages from your phone. For

–

Enter a space or comma after the first number.

Then enter another recipient manually.

information on voicemail messages, see page 9.

Note: You can send a message to up to 10

contacts at once. The messages will be sent one

at a time, once to each addressee.

Important: The features and menus described in

this chapter may vary depending on services

available in your area. In addition, usage charges

may apply to each message. For details, check with

your service provider.

4. When you are done entering addresses, press

right to highlight Next and press

5. Enter the message. To learn how to enter text,

see page 13. To add special features such as

smiley faces, see “Including pictures, sounds,

and prewritten text” on page 20.

Sending text messages

You can only send text messages to phones that are

capable of receiving them, or to email addresses.

Note: Depending on your service provider, you

may be charged for more than one message if

your message exceeds a certain number of

characters. For more information, see

“Understanding appended messages” on

page 22.

Writing a message

To send a text message to a single recipient:

1. Select Menu → Messages → Send New.

2. Choose a method to enter the recipient’s phone

number or email address:

6. When you have completed the message, press

–

Select a saved number from the Recent List

or Contacts List, or select a Group List you

have created. For more about group lists,

see page 25.

to select Send.

Including pictures, sounds, and

prewritten text

–

Enter a New Address manually.

Depending on the services available from your

carrier, you may include smiley faces, graphics, and

sound in your text messages.

(To learn how to enter text, see page 13.)

3. To add another recipient to this message,

choose a method:

1. Create a text message and enter the addresses.

–

Press

right to select Options. Then

2. Select Next to advance to the message text

select Recent List, Contacts, or Group Lists.

entry screen.

Sending and Receiving Text Messages

Download from Www.Somanuals.com. All Manuals Search And Download.

3. From the text entry screen, press

right

Setting sending options

twice, select Options → Insert and select from

the options:

When you are ready to send a message, you have

several options for how and when you want the

message to be received.

–

My Sounds—Add a sound or melody.

Highlight one from the list and press

select Insert.

1. Once you have completed the message, press

right to highlight Options and press

Then choose from the list:

–

My Pictures—Add a graphic you have

received in a text message, created using

Doodler, or downloaded to your phone.

–

Insert—Enhance your message with sounds,

graphics, smiley faces, prewritten text, or

contact information (if available from your

service provider). See options on page 20.

Press

graphics and press

Smileys—Select a smiley face icon. If the

right or left to scroll through

to select Insert.

–

Add Address—Return to the “To” screen

to add another recipient without losing

the message text. Enter the new address,

then select Next to return to the message

entry screen.

recipient’s phone does not support the same

technology as your phone, the icons will

appear to them in a more simplistic form.

Tip: Press and hold

to cycle through

smileys while in the text entry screen.

–

Msg Receipt—Alerts you when the

recipient has received your message.

(Service may not be available to you. Check

with your service provider.)

Highlight one and press

to select Insert.

–

QuickText—Select a prewritten message.

Highlight one from the list and press

select Insert. (To edit or create new

prewritten messages, see page 26.)

–

Set Priority—Label the message as “Urgent.”

Callback Number—Include a callback

number with the message to let the recipient

know at what number they can call you back.

Select Yes to include your own number, or

Edit to enter a different callback number.

Contacts—Add information about a saved

contact. Highlight the contact from the list

and press

to insert it.

4. When you have completed the message, you can

send it immediately or set sending options. To

–

Send Later—Schedule when to send

send it immediately, press

to select Send. To

the message.

set sending options, see the following procedure.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

–

Save Message—Save the message in

your Saved folder. This prevents the

message from being deleted if you have

activated AutoErase, and enables you to

send the message to others.

If you cannot send messages

You may not be able to send or receive messages if

your phone’s memory is nearly full, or if digital

service is not available at the time. To free up

memory, erase old messages. See “Erasing

messages” on page 25.

Save QuickText—Save the message you

have just entered as a prewritten message,

then return to the message entry screen so

you can send the message.

Understanding appended messages

Characters remaining

Text entry field

2. When you have finished setting options, press

to return to the message window.

3. Highlight Send and press

Adding a signature

If you go over the character limit for a single

message, the phone may automatically append an

empty segment to your message to make space.

This setting allows you to create signature text.

The signature does not display in the message

creation screen; however, the signature is included

at the end of all outgoing messages.

Important: Your service provider will charge you

for each message segment.

To create a signature

When you start a message, the maximum character

limit (“200” in the example) appears above the text

entry screen. This number counts down as you enter

characters, until it reaches 0. If you continue to enter

text after this counter reaches 0, a message segment

may be appended. If a segment is appended, a

message will appear on the phone screen.

1. Select Menu → Settings → Msg Settings →

Signature.

2. Enter your signature in the text field.

3. Press

to select OK and save the setting.

Note: The signature text is tallied by the

character counter because the signature is

included in the text field.

Sending and Receiving Text Messages

Download from Www.Somanuals.com. All Manuals Search And Download.

Receiving incoming calls while

creating messages

The message cannot be sent because

service is not available. An alert

appears on your phone if the message

cannot be sent.

•

If you don’t wish to answer the call,

select Ignore.

The scheduled message has been sent

and will be delivered as scheduled. You

cannot cancel delivery of the message.

•

To answer the call, press

. The message

you were working on will be saved in the Saved

folder. To return to the message, select

Menu → Messages → Saved and select it.

The message has been received by the

recipient you specified.

Viewing the OutBox

You can check the status of messages you have sent

as long as they have been saved to the OutBox.

The message has been received and

opened by the recipient you specified.

(This symbol may not be available.

Check with your service provider.)

Note: If messages you have sent were not saved to

the OutBox, select Menu → Messages → Msg

Settings → Save to Outbox.

The message has been sent to more

than one recipient.

The message has never been sent, or

has not been sent since it was last

modified. You can cancel delivery of

the message.

To view the OutBox:

1. Select Menu → Messages → OutBox.

2. Press

up or down through the list of

messages. One of the following symbols

appears next to each message:

Retrieving text messages

The message is pending and will be

sent when possible. You can cancel

delivery of the message.

When a text message is received, your screen will

display text similar to: “New message 1 Text Msg”.

This text will remain for approximately five

The scheduled message will be sent at

the scheduled time. You cannot cancel

delivery of the message.

minutes. After that, look for the

top of your screen. The symbol flashes if the

message is urgent.

symbol at the

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

2. When you are finished, you can Reply to the

sender, Play the sound embedded in the

message, Erase the message, Save the message

to your Saved folder, or set additional Options

for the message:

If you see the “New Message” note

You can choose to:

•

View the message—Press

Ignore the message—Press

right and

press

–

View Sender information.

•

Clear the screen—Press

Forward the message.

Note: If you receive a new message while you are

reading a message, the one you are reading will be

replaced by the new one. You can find the older

message in the InBox: Select Menu →

Messages → InBox.

Reply with Copy to reply to the message

with a copy of the original attached.

–

Save Object(s), such as sound or pictures,

from the message. (This option is available

if the incoming message includes a graphic

or sound.)

If you see the

symbol

If the symbol is flashing, the message is urgent.

Save Contact to save the sender’s phone

number or email address in your Contacts

list. (This option is available if a vCard is

included in the message.)

1. Select Menu → Messages → InBox.

A list of all your received messages appears.

New, unread messages appear in bold.

Save as QuickText to save the text from the

message as QuickText, which you can insert

into other messages. Graphics and sound

will not be saved as part of QuickText.(For

more about QuickText, see page 26.)

indicates an “Urgent” message.

2. Press

of messages.

3. Press

up or down to scroll through the list

to read a message.

3. Select Done.

Reading the message

The options available to you may vary. Check with

your service provider.

Note: The

symbol indicates:

•

A graphic did not come through. It may be too

large or incorrectly formatted.

Note: Sounds embedded in text messages will not

play if the phone is set to Silence All mode.

An appended message is missing. (For more

about appended messages, see page 22.)

1. If the text message is long, press

down to

view the entire message.

Sending and Receiving Text Messages

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting message alerts

Erasing all messages

1. Select Menu → Messages → Erase Msgs.

You can set your phone to alert you of incoming

text messages or pages. For more information, see

“Setting message alerts” on page 34.

2. Press

an option:

up or down and press

to select

–

InBox erases all messages in your InBox.

Erasing messages

It is a good idea to erase old messages, as messages

take up memory in your phone.

OutBox erases all messages in your OutBox.

Saved Folder erases all messages in your

Saved folder.

You have the option of erasing text messages and

pages as you send or read them, erasing them one-

at-a-time from the list in the OutBox or InBox, or

erasing them all at once.

–

All Messages erases all text messages in all

folders listed above.

3. A message appears: “Erase all messages?”

Select Yes to erase messages or No to cancel.

Erasing single messages

1. Select Menu → Messages.

Erasing messages automatically

Use this setting to have old messages automatically

erased from the InBox when memory is low.

2. Press

down and press

to select the

type of text message you want to erase (InBox,

OutBox, or Saved).

1. Select Menu → Messages → Msg Settings →

Auto-Erase.

3. Press

to select the message to erase.

2. Press

to select Old InBox Msgs.

4. Select Erase to erase the message. A notification

appears: “Erase this message?”

Customizing message settings

To make messaging easier, you can customize

settings for sending and receiving messages.

5. Select Yes to erase the message.

Note: You can erase a scheduled message from

the OutBox, but you cannot cancel delivery of

the message.

Creating group lists

You can create and save a list of multiple recipients.

Your Phantom phone will store five group lists with

up to 10 recipients per list.

1. Select Menu → Messages → Group Lists →

Create New.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Enter a name for the list. For help entering text,

will store up to 20 QuickText messages, with up to

100 characters per message.

see page 13.

3. Press

to select Next.

1. Select Menu → Messages → Msg Settings →

Edit QuickText.

4. To enter the first phone number or email

address, select an option:

2. To create a new pre-written message, highlight

New QuickText and press

–

Recent List—Select numbers from your

Recent List.

-or-

–

New Address—Enter the phone number or

email address yourself. To learn how to

enter text, see page 13.

To edit an existing pre-written message,

highlight the message and press

3. Enter or edit the text and press

to select

–

Contacts List—Select contacts from your

Done. For help entering text, see page 13.

phone book.

Note: You can also save an incoming message

5. To enter the next address, enter a space or

comma after the first number or email address.

(If you insert a saved contact or a number from

the Recent List, the phone will insert the comma

as QuickText. For directions, see page 24.

Switching default text entry mode

You can set the default text entry mode to appear in

message text entry screens.

automatically.) Then press

right twice,

select Options, and choose from the options.

1. Select Menu → Messages → Msg Settings →

Default Text.

6. When finished, press

right and press

to select Done.

2. Select Normal Alpha or Rapid Mode.

7. To send a message to your new group, see

For more information on text entry modes,

see page 13.

“Sending text messages” on page 20.

Creating and editing prewritten

messages (QuickText)

Your phone comes with prewritten (QuickText)

messages, such as “Please call me,” which you can

insert into the body of a text message. You can edit

these messages and create new ones. Your phone

Sending and Receiving Text Messages

Download from Www.Somanuals.com. All Manuals Search And Download.

CUSTOMIZING YOUR PHONE

The contents of the Settings menu are as follows.

Silent Mode

Keyguard

Display (continued)

Wallpaper**

Color Themes**

Auto-Hyphen

Language

Time Format

Contrast

Call Information

Recent Calls

All Calls Timer

Data Timer

Convenience (continued)

Frequent List

1-Touch Dialing

Web Prompt

Call Guard

Sounds

Ringer Volume

Ringer Type

Business Ring

Personal Ring

Roam Ringer

Earpiece Volume

Key Volume

Key Length

Missed Call

Smart Sound

Minute Alert

Network

Data/Fax Calls

Privacy Alert

Voice Privacy

Data Setup

User Name

Set Phone Line

Roam/Svc Alert***

Roam Option***

Digital/Analog***

Location***

Msg Settings

Voicemail Num.

Alerts

Voice Services

Add Voice Dial

Erase Voice Dial

Voice Training

Voice Wake-Up

Voice Answer

Signature

Edit QuickText

Callback Number

Msg Receipt

Save to Outbox

Auto-Erase

Security

Lock Phone

Limit Calls

Default Text

Display

Backlighting

My Banner

Convenience

Shortcut Key

Accessories

Pwr Backlight

Lock Code

Erase Contacts

Emergency #’s

Fast Find

Headset Ring

Auto-Answer

TTY Device***

Com Speed***

Flashing Lights

Main Menu View

Screen Saver*

* Available on grayscale phones only

** Available on color phones only

*** Not available on all phones. Check with your service provider.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

Shortcut to Vibrate Only mode

From the home screen, press

hold. appears.

Silencing all sounds

•

right and

right

Your phone is set to make sounds when you receive

calls, press keys, navigate through menus, and

receive alerts (such as new messages).

Turning sounds back on

To restore all sounds to the phone:

You can silence all sounds and set the phone to

vibrate or light up when you receive calls and alerts.

•

From the home screen, press

and hold.

Setting the phone to vibrate or light up

-or-

1. Select Menu → Settings → Silent Mode.

•

Select Menu → Settings → Silent Mode →

Norm. Sounds.

The

2. Choose an option and press

–

Vibrate Only—Causes the phone to vibrate

disappears. The phone will now

for the duration of the incoming call or

other alert. appears.

ring for incoming calls and alerts.

–

Vibrate, Ring—Causes the phone to vibrate

for the first 10 seconds and then ring for the

remainder of the incoming call alert.

appears.

Choosing a different ringer

Your Kyocera Phantom phone has 15 ringers you

can from choose to use for incoming calls.

1. Select Menu → Settings → Sounds →

–

Lights Only—Causes the phone to light up

for the duration of the incoming call or

Ringer Type.

2. Scroll down the list to hear the different rings.

other alert.

appears.

3. Press

to select a ringer from the list.

3. Press

to return to the home screen.

Note: The phone will ring when it is attached to an

external power source (such as a charger), even if

all sounds have been silenced.

Customizing Your Phone

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifying ringers for different callers

You can assign ringers that identify calls from different

phone numbers saved in your Contacts directory.

Adjusting the ringer volume

1. Select Menu → Settings → Sounds →

Ringer Volume.

•

To assign a ringer to an individual contact,

see page 16.

2. Press

right to increase the volume, or left to

decrease the volume.

•

To assign a ringer to a class of contacts:

Changing the key tones

1. Select Menu → Settings → Sounds.

2. Ηighlight Business Ring or Personal Ring and

You can change the volume and duration of the

tones the phone makes when you press the keys.

Select Menu → Settings → Sounds and choose

Key Volume or Key Length.

press

3. Select a ringer and press

Note: To classify a contact as Business or

Personal, see page 16.

Using shortcuts

From the home screen, you can access shortcuts by

pressing the navigation key in different directions.

Three shortcuts are automatically programmed into

your phone:

Importing additional ringers

You can download additional ringers into your

Kyocera Phantom phone using the Kyocera Phone

Desktop software (sold separately). To purchase

this software and other accessories, visit

www.kyocera-wireless.com/store.

Press

left

Left locks the keypad.

Right silences sounds

and sets phone to

vibrate.

You may be able to download ringers over-the-air.

Check with your service provider for availability.

right

Down lists the phone’s

Contacts directory.

Adjusting volume

You can adjust the volume of the earpiece, the ringer,

or the beeps you hear when the keys are pressed.

Press

down

You can set a shortcut to

one of the features of

your phone.

Adjusting the earpiece volume

To adjust the earpiece volume manually during a call,

press

up or down to find a comfortable level.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

Defining the feature shortcut (up)

1. Select Menu → Settings → Convenience →

Choosing a different menu view

You can change the appearance of the menus you

see when you select Menu from the home screen.

Shortcut Key.

2. Highlight the feature you want a shortcut to, and

1. Select Menu → Settings → Display →

press

Using the feature shortcut

From the home screen, press and hold

to select it.

Main Menu View, then the option you want:

•

up.

Choosing a different language

Your phone may display alternative languages.

Graphic

List

1. Select Menu → Settings → Display →

Language.

2. Press

next time you press

view you selected.

to return to the home screen. The

2. Select a language, and press

, you will see the menu

Personalizing the screen

Adjusting the backlighting

Changing your banner

Your screen lights up while you are in a call or

when you press a key on the keypad. However, you

can change when and how backlighting lights up.

The banner is the personal label for your phone.

It appears on the home screen above the time and

date. The banner can be up to 14 characters long.

1. Select Menu → Settings → Display →

Backlighting.

My Banner.

2. Select an option from the list:

2. Select Edit.

–

5 seconds, 10 seconds, 30 seconds, or 1

Minute —(Default) Turn backlighting on

for 5, 10, 30 seconds or 1 minute after your

last keypress.

3. Press

to clear the screen.

4. Enter your new text.

5. Press

to save.

Customizing Your Phone

Download from Www.Somanuals.com. All Manuals Search And Download.

–

5 sec/in call , 10 sec/in call, 30 sec/in call, or

1 Min/in call—Turn backlighting on for the

duration of a call, and for 5, 10, 30 seconds

or 1 minute after your last keypress.

(Note: These four settings drain the

battery more quickly and reduce talk

and standby times.)

Caution: A small percentage of users may be photo

sensitive to flashing lights. In rare cases, exposure

to flashing lights, under certain circumstances, may

produce seizures. While such an event is not known

to occur with mobile phone use, and the Phantom

phone has been designed to minimize the

possibility of any such occurrence, those who

believe they may be photo sensitive should not

enable the Flashing Lights feature.

Setting power backlighting

You can set backlighting to remain on when an

external power source, such as the AC adapter, is

used with the phone.

Changing the display contrast

1. Select Menu → Settings → Display →

Contrast.

Note: Power backlighting may not be available with

some accessories. Check with your service provider.

2. Select the level of contrast you want.

1. Select Menu → Settings → Accessories →

Setting numbers to auto-hyphenate

Pwr Backlight.

Auto-hyphenation is a setting that automatically

inserts hyphens into your phone numbers to be

consistent with the U.S. dialing plan.

2. Select Always On to keep backlighting on.

(The battery charges more slowly when power

backlighting is on.)

For example, 1-222-333-4444.

•

Select Menu → Settings → Display →

Auto-Hyphen → Enabled.

Setting backlighting to flash

You can set the backlighting on your phone to flash

in a certain style when an incoming call is received.

When this setting is activated, the lights will flash

even if you silence the ringer.

1. Select Menu → Settings → Display →

Flashing Lights.

2. Select from Fast Flash, Slow Flash, or

Heartbeat, or Rhythm. As you highlight the

options a sample of each flash is provided.

3. Press

to select your option.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting a screen saver

Selecting a color theme

You can select a color theme to display on your

phone. This feature is available only on phones with

a color screen display.

Note: Screen savers are not available on all

Phantom phones. They are included only on

phones with a grayscale screen display and in some

phones with a color screen display which also

include an application such as BREW, Axcess Apps,

or Download Shop. For availability, contact your

service provider.

1. Select Menu → Settings → Display →

Color Themes.

2. Highlight a color theme from the list and

press

Screen savers work only from the home screen, and

they are activated 10 seconds after the last keypress.

Incoming calls and alerts override screen savers.

3. Press

to return to the home screen.

Choosing a different time/date format

1. Select Menu → Settings → Display →

Screen Saver.

Time Format.

2. Highlight a screen saver and press

2. Highlight the option you want.

3. Press to return to the home screen and wait

Creating a secure environment

10 seconds to view the screen saver you chose.

This section describes all the features involved in

securing your phone and preventing access to

personal information. All security features are

shielded by a four-digit lock code.

Note: You can add graphics you have created or

saved to the Screen Savers list. Refer to “My

Pictures” on page 46.

Selecting wallpaper

Wallpaper appears on the home screen, when the

phone is not in use. This feature is available only on

Phantom phones with a color screen display.

1. Select Menu → Settings → Display →

Wallpaper.

2. Highlight a wallpaper design and press

3. Press to return to the home screen and

view the wallpaper you chose.

Customizing Your Phone

Download from Www.Somanuals.com. All Manuals Search And Download.

Designating emergency numbers

Changing your lock code

The lock code is typically 0000 or the last 4 digits

of your phone number.

The emergency numbers feature allows you to

specify three personal phone numbers that can be

called when the phone is locked.

1. Select Menu → Settings → Security.

2. Enter your four-digit lock code and select Lock

1. Select Menu → Settings → Security.

2. Enter your four-digit lock code.

3. Select Emergency #’s.

Code. A message appears: “Change Code?”

3. Select Yes and enter a new four-digit code.

Enter your new lock code again.

4. Select an Unassigned slot.

Note: Enter the phone number, including the

area code. Do not enter 1 before the area code.

Locking your phone

When your phone is locked, you can call only

emergency numbers or your service provider

number. You can still receive incoming calls.

5. Press

Notes:

to select Done.

•

You can view these numbers only when they’re

being entered for the first time.

1. Select Menu → Settings → Security.

2. Enter your four-digit lock code.

3. Select Lock Phone.

•

You cannot edit these numbers.

To make a call to an emergency number from a

locked phone, you must dial the number

(including area code) exactly as it was stored in

Emergency Numbers.

4. Highlight an option:

–

Never—Does not lock the phone.

On power up—Locks the phone every time

you turn it on.

Restricting calls

–

Now—Locks the phone immediately.

You can restrict the calls that can be made from

your phone to only those that have been saved in

your Contacts Directory.

5. Press

Unlocking the phone

1. Select Menu → Settings → Security.

2. Enter your four-digit lock code.

3. Select Limit Calls.

1. From the home screen, press

select Unlock.

2. Enter your four-digit lock code.

4. Select Contacts Only.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

Erasing all contacts

You can erase all contacts from the

Contacts directory.

Setting alerts for your headset

When a headset (sold separately) is attached to the

phone, you can set alert sounds to originate from

the headset.

1. Select Menu → Settings → Security.

2. Enter your four-digit lock code.

3. Select Erase Contacts.

1. Select Menu → Settings → Accessories →

Headset Ring.

2. Select Out headset to have alerts originate from

4. Select Yes to erase all contacts. A message

the headset.

appears: “Erase ALL contacts?”

5. Select Yes to erase all contacts.

Network settings

Setting message alerts

You can choose how you want be alerted of

incoming voicemail, pages, or text messages.

Switching between phone lines

Your phone can have two service accounts, or

phone lines, associated with it. Each phone line has

its own phone number. When you are using one

line, you cannot receive calls from the other.

It would be as if the phone were “off” for that

number. Your voicemail, however, will still take

messages. All contacts and settings are shared for

both lines.

1. Select Menu → Settings →

Msg Settings → Alerts.

2. Select the type of alert: Message Alert, Net Alert,

Page Alert, or Voicemail Alert.

3. Press

to select an option:

–

Vibrate, Beep, Hiya!, Rock!, or Happy—Set

the phone to vibrate, beep, or play a tune once

when a new message is received.

1. Select Menu → Settings → Network →

Set Phone Line.

2. Select the other line and press

–

Options with remind—Set the phone to notify

you once when a new message is received and

then notify you again every five minutes. To stop

Note: Before you can switch between phone lines,

you must first establish a second phone line with

your service provider. Once it has been established,

a second phone number becomes available in the

menu for selection.

a reminder alert, press

to select Ignore.

–

Disabled—Turn off message alerts.

Customizing Your Phone

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Connect the phone to the laptop or PC.

Data settings

2. Set the Com Speed.

Setting Com port speed

3. Select Menu → Settings → Network →

The Com Speed sets the data rate at which your

phone connects to a laptop or PC, or at which it

sends and receives over-the-air text messages.

Data/Fax Calls.

4. Press

to select an option:

–

Voice only—Allow only voice calls.

1. Select Menu → Settings → Accessories →

Fax next call or Data next call—Set the

phone to fax mode or data mode for the

next incoming call or the next 10 minutes.

Com Speed.

2. Select the speed. The options are: 19.2 kbps,

115.2 kbps (default), 230.4 kbps.

–

Fax until off or Data until off—Force the

phone into fax mode or data mode until the

phone is turned off.

Note: There may be a higher charge for making

calls using high-speed data in areas where 1X

service is available. Check with your service

provider for details.

Note: You cannot receive voice calls while the

phone is in data/fax mode.

Setting the phone to receive data

or faxes

Connecting to a TTY/TDD device

TTY/TDD may not be available on your phone.

Check with your service provider for availability.

Your phone may be able to receive certain data or

faxes, depending on the system sending the

information. To receive data or faxes, you must

connect the phone to a laptop or PC and switch the

phone from voice mode to data/fax mode.

You can connect the phone to a TTY device for the

hearing impaired. Note: Enable TTY only when

using the phone with a TTY device.

1. Connect the TTY device to the phone.

Note: To purchase a cable, contact your service

provider, call (800) 349-4188 (U.S.A. only) or

(858) 882-1410, or visit

2. Enter

your keypad.

3. Press to select the TTY option.

from

www.kyocera-wireless.com/store.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting position location

This setting allows you to share your location

information with network services other than

emergency services (911, 111, 000, 999, etc.), in

markets where service has been implemented.

Note: This feature works only when your phone is

in digital mode. You do not have the option of

turning off the locator to emergency services.

1. Select Menu → Settings → Network →

Location.

2. If you see a message prompt, press

to continue.

3. Select 911 Only or Location On.

–

911 Only (default) shares your position

information only with emergency services

when you call your 3-digit emergency code

(911, 000, 111, 999, etc.).

–

Location On shares your position

information with your service provider’s

network, in addition to emergency services.

For information on emergency calls, see “Calling

emergency services” on page 7.

Customizing Your Phone

Download from Www.Somanuals.com. All Manuals Search And Download.

USING VOICE RECOGNITION

Voice recognition allows you to make and

answer calls by speaking commands into the

phone’s microphone.

Editing a voice tag

1. Select Menu → Contacts → Voice Dial List.

2. Highlight the contact you want to edit, and press

Note: You cannot use voice recognition to end a

to select it.

call; you must press

3. Highlight the phone number and press

4. Select Add Voice Dial, Edit Voice Dial,

Setting up voice dialing

or Erase Voice Dial.

To make or receive calls using voice recognition

(voice dialing), contacts must be saved and have

associated voice tags.

5. Follow the prompts.

Calling using voice tags

1. If you haven’t already done so, record a voice

Creating a voice tag for a contact

1. Select Menu → Contacts → Add Voice Dial.

tag for the person you wish to call.

2. From the home screen, press

. The phone

2. Follow the voice prompts to record a name for

responds: “Say a name.”

the contact.

3. Say the name of the person you want to call.

3. Highlight an option:

4. If the name you said matches a contact in the

Voice Dial List, the phone responds: “Calling

(Name).” Remain silent to make the call, or say

“No” tocancel.

–

Add new—Save a new contact to go with

the voice tag.

–

Add to existing—Add the voice tag to a

saved contact.

Note: If the phone finds multiple voice tags that

sound like the name you said, you will be asked

to verify which name you want to call. Say “Yes”

when you hear the correct name. Say “No”

when you hear an incorrect name.

Viewing entries with voice tags

•

Select Menu → Contacts → Voice Dial List.

A list of all contacts with assigned

voice tags appears.

5. When you are finished, press

. You cannot

end the call with a voice command.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

To wake up the phone:

Using voice features with

hands-free car kits

You can use voice commands to make a phone call

or to answer the phone only if your phone is

connected to a professionally installed Kyocera

hands-free car kit (sold separately).

1. Say “Wake Up” and listen for a tone.

2. Say “Wake Up” again until you hear two tones.

If the phone does not recognize your “Wake up”

command, see “Training voice recognition” on

page 39.

Note: The following features apply only to

professionally installed hands-free car kits

unless noted.

Answering the phone

You can set the hands-free car kit to either

(1) answer automatically or (2) ring until you

answer using a voice command.

To shop for hands-free car kits, visit

www.kyocera-wireless.com/store, or call

800-349-4188 (U.S.A. only) or

858-882-1410.

Answering automatically

To set your phone to answer automatically:

•

Select Menu → Settings → Accessories →

Auto-Answer → After 5 secs.

Waking up the phone

Note: This setting also works wih the portable

hands-free car kit.

If your phone is connected to a professionally

installed Kyocera hands-free car kit, you can use a

voice command to activate the phone to make a

phone call.

Answering using voice commands

If Auto-Answer is turned off, you can use a voice

command to answer an incoming call using the

Kyocera hands-free car kit.

Note: Voice Wake-up does not work with

Keyguard active.

To activate the Voice Wake-up setting:

To turn off Auto-Answer:

1. Select Menu → Settings → Voice Services →

•

Select Menu → Settings → Accessories →

Auto-Answer → Disabled.

Voice Wake-Up → With ext. pwr.

2. Select Menu → Settings → Keyguard →

Disabled, then press

Using Voice Recognition

Download from Www.Somanuals.com. All Manuals Search And Download.

To activate the Voice Answer setting:

Training voice recognition

1. Select Menu → Settings → Voice Services →

If your phone is having trouble recognizing your

voice, you can train it with the commands “Yes,”

No,” and “Wake up.”

Voice Answer.

2. Highlight Enabled, then press

1. Select Menu → Settings → Voice Services.

2. Select Voice Training.

3. Select Menu → Settings → Silent Mode →

Norm. Sounds then press

To answer a call:

3. Read the message and press

When you receive an incoming call, the phone

responds: “Incoming call, answer?” or “Incoming

roam call, answer?” If the caller is recognized as a

saved contact entry, then the phone will say

“Incoming call from (Name), answer?”

4. Select Train All.

5. Follow the prompts for each word until training

is complete.

Note: The “Wake up” command can only be

used with a hands-free car kit or headset

(both sold separately).

•

Say “Yes” or press any key except

Ignoring an incoming call

To ignore an incoming call, do one of the following:

•

Say “No” and press

to silence the alert.

Remain silent. The voice alert repeats twice

and the phone rings once, then returns to the

home screen.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

USING TOOLS

Viewing, editing, or erasing an event

1. Select Menu → Tools → Scheduler.

Scheduler

The Scheduler allows you to schedule events and

set reminder alerts.

2. Select View Day or View Month to find the event

you want to view, edit, or erase.

Adding an event

1. Select Menu → Tools → Scheduler.

3. Press

up, down, left, or right to highlight an

to select it.

right and press to select Edit,

event and press

–

For a day in this month, select View Day. Press

4. Press

left and right to scroll through days.

Erase, or New. Follow the prompts.

5. Press to return to the home screen or

to return to scheduler options.

–

For a day in a different month, select

View Month. Press

up or down to scroll

through months, and right or left to scroll

through days.

Alarm Clock

Use the Alarm Clock to set an alert for a specific

time. The alert occurs only if the phone is on.

2. Press

to add an event to a selected date.

3. Enter a name for the event and press

. For

help entering text, see page 13.

1. Select Menu → Tools → Alarm Clock → Set.

4. Set the event Start time, Duration, and Alarm

–

Press

and minutes.

up or down to select an hour

and press

–

Press

up or down to select hour,

Press

left or right to switch between

minutes, and timing of alarm.

hours, minutes, and a.m./p.m.

–

Press left or right to move between fields.

Use the phone keypad to enter numbers.

5. Add a note to the event and press

or press

2. Press

to select Done and save the setting.

twice to finish.

3. When the alarm rings, select Off to turn off the

alarm or Snooze to silence the alarm for

10 minutes.

Using Tools

Download from Www.Somanuals.com. All Manuals Search And Download.

Tip Calculator

The Tip Calculator helps you calculate how much

tip to include on a bill.

Clear one function or one digit from the

screen. Hold down to clear all of the digits

and operations and display a zero.

Exit the calculator and return to home screen.

1. Select Menu → Tools → Tip Calculator.

2. Enter the amount of your bill and press

World Clock

World Clock may not be available on your phone.

Check with your service provider for availability.

3. Select the amount you want to include as a tip

(10%, 15%, 18%, 20%, Other) and press

Your total bill appears, including tip.

The World Clock lets you check times in cities

around the world in relation to local time.

4. If you want to split the bill, press

right and

press

to select Split.

1. Select Menu → Tools → World Clock.

5. Press

to clear the default of 2 guests.

The World Clock menu is displayed. Your local

time and date is on the first line, followed by

your selected world city and that city’s time

and date.

6. Enter the number of guests and press

The amount each guest pays is calculated.

Calculator

When you first access World Clock, you are

prompted to select a city.

Use the calculator for basic mathematical equations.

1. Select Menu → Tools → Calculator.

2. Use the keypad to enter numbers.

2. Press

to select Cities.

The Cities menu is displayed, showing 85 world

cities in alphabetical order.

3. Press

to select mathematical operations.

equal

divide

add

multiply

3. Press

up or down to scroll through the

cities list. You can also use the number keys

(2-9) to alphabetically tab through the list.

subtract

decimal point

Clear all numbers entered and display a zero.

4. Press

to select a city, like Athens.

MR Display the value currently stored in memory.

The World Clock menu is displayed again,

with Athens’ time and date.

M+ Add the displayed digit to the value stored

in memory.

MC Clear the value currently stored in memory.

Change the sign of the displayed number.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

From the World Clock menu, you can also select

Search to search by city or country.

Timer

This timer counts down for a specified amount of

time. It beeps when that amount of time has elapsed.

1. Select Search from the World Clock menu.

The Search By menu is displayed.

2. Select your type of search.

1. Select Menu → Tools → Timer.

2. Press

to Set.

–

Press

search by City.

3. Press

up or down to set the hours, minutes,

and seconds. To move the cursor, press

left

Press

down, then press

to search

or right.

by Country.

4. Select Start to begin the countdown.

Select Stop to pause the countdown.

3. If you search by City, the Find City screen

is displayed.

a. Use your number keys (2-9) to enter the

letter(s) by which you want to search. For

example, press 2 once to enter the letter A.

5. When the alarm rings, press

to silence it.

Stopwatch

1. Select Menu → Tools → Stopwatch.

2. Select Start to have the stopwatch begin counting.

b. Press Search.

c. Cities beginning with A are displayed, like

Anchorage, Athens, and Atlanta.

3. Select Stop to stop counting.

d. Use

to move through the list, then press

to select a city.

4. Select Reset to set the counter back to zero and

begin counting again.

4. If you search by Country, the Find Country

Press

when finished.

screen is displayed.

a. Use your number keys (2-9) to enter the

letter(s) by which you want to search. For

example, press 2 once to enter the letter A.

b. Press Search.

c. Countries beginning with A are displayed,

like Afghanistan, Algeria, and Australia.

d. Use

to move through the list, then press

to select a country.

Using Tools

Download from Www.Somanuals.com. All Manuals Search And Download.

MEDIA GALLERY / FUN & GAMES

The games described in this chapter may not be

available on your phone. Check with your service

provider for availability.

–

Scoreboards—Displays the top five scores

for the different game variations, including

No Time Limit (default), Timed 2 Min,

Timed 3 Min, Timed 5 Min., and Garbage.

If you receive an incoming call alert while you are

playing Tetris® or Brick Attack™, the game is

paused and exited. You can return to play once the

call alert ends. Games do not remain paused if the

phone is turned off or loses power.

Settings—Choose a level of play, sounds,

and game type:

–

Starting level—Choose a level of play.

Game Type—Choose type of game.

Sound—Choose when music will play

with this game: Sound Always, During

Title, or No Sound (The No Sound

setting does not silence the sounds made

when you press keys. To silence keys,

see “Silencing all sounds” on page 28.)

Tetris

The goal of this game is to guide the falling blocks

down the screen to create a solid horizontal row at

the bottom. The game ends when the new block

cannot enter the play field because the area is

occupied by another block or obstacle.

Navigation: Use the following keys to guide the

1. Select Menu → Fun & Games → Tetris.

blocks down the screen:

2. Press

backlight to conserve battery?”

3. Select an option and press

to select Yes at the prompt, “Turn off

To:

Use:

Rotate

Counterclockwise

to select it.

New Game—Initiates game play. To pause

the game, press or . Pressing

–

Hard drop

Move Left

left

returns you to the menu where you can

Continue Game to resume or choose from

the other available options.

Rotate Clockwise

Move Right

, or

right

down

–

Resume Saved—Returns you to the game

you were last playing.

Soft drop the tile

Return to Tetris menu

Pause

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Use keys 1–9 to move the cursor

Brick Attack

around the screen.

The goal of this game is to eliminate bricks

arranged in levels. You send a moving ball upward

using a paddle at the bottom of the screen.

Note: Press

to bring the cursor

back to center.

Note: For more drawing tips, refer to the

following sections.

1. Select Menu → Fun & Games → Brick Attack.

2. Press

to select Yes at the prompt, “Turn off

backlight to conserve battery?”

Select a drawing color

3. Press

to select New.

1. Press

left or right to highlight Color at the

–

To pause the game, press , then press

bottom of the screen. Press

to Resume.

2. Highlight a color from the palette and press

–

To move the paddle, press

left or right.

Move cursor away from drawing

4. To exit the game, highlight Exit and press

1. Press

up or down to select

(Shortcut: Press

Doodler

You can create and save graphics on your phone.

2. Press a number key to move the cursor.

Note: To start drawing again, select a drawing

shade or color.

1. Select Menu → Media Gallery

(or Fun & Games)→ Doodler.

2. Wait 5 seconds for the intro screen to

Clear screen

disappear, or press

to clear it.

•

Press

3. Select New Doodle to open the drawing screen.

cursor

Media Gallery / Fun & Games

Download from Www.Somanuals.com. All Manuals Search And Download.

Erase part of drawing

1. Press up or down to select

Resuming a doodle

•

To return to the last saved doodle you were

working on, select Menu → Media Gallery (or

Fun & Games) → Doodler → Resume Doodle.

2. Press a number key to move the eraser.

Add a shape

To return to another saved doodle, select Menu →

Media Gallery (or Fun & Games) → Doodler →

My Pictures.

1. Press

left or right to select Add Shape.

2. Press

3. Select a shape and press

My Sounds

4. To modify the shape, press

right or left to

Your phone contains preset sounds, which you can

add to outgoing text messages. Check with your

service provider for availability.

highlight an option and press

Options are Size, Rotate, and Move. (To move

the shape, use keys 1–9.)

To access stored sounds:

5. Select Done.

1. Select Menu → Media Gallery

(or Fun & Games) → My Sounds.

Saving the doodle

It is a good idea to save the doodle while you are

working on it. If you receive a call while creating an

unsaved doodle, it will be lost.

2. Press

the sounds.

3. Highlight an option and press

up or down to scroll through

to select it:

Play allows you to listen to the sound.

•

Highlight Save and press

. The image will be

–

saved in the My Pictures folder. (See page 46.)

Send opens a new message entry screen.

Note: If you make changes to an existing

doodle, you must save it with a different name.

Assign allows you to use the sound as a

ringer on your phone.

–

Delete erases the sound from your

My Sounds list.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

My Pictures

Saving memory

The My Pictures menu stores 25 graphics you

have created using the Doodler or received via

text messaging. It also includes predefined graphics

for your use. Check with your service provider

for availability.

It is a good idea to erase old sounds and pictures,

as they take up memory in your phone. To erase a

sound or picture, select it and and then select

Delete. Refer to “My Sounds” and “My Pictures”.

Note: All downloaded graphics are also stored in

the Screen Saver menu.

To view, edit, or erase graphics:

1. Select Menu → Media Gallery

(or Fun & Games) → My Pictures.

2. Press

the graphics.

3. Highlight an option and press

up or down to scroll through

to select it:

Send opens a new message entry screen.

–

Assign sets your graphic as a screen saver.

Edit takes you to the Doodler, where you

can modify the graphic. You cannot edit

predefined graphics.

–

Delete erases the graphic from memory.

The graphic is also erased from the Screen

Saver menu. (You cannot delete predefined

graphics that came with the phone.)

Exit returns you to the home screen.

Media Gallery / Fun & Games

Download from Www.Somanuals.com. All Manuals Search And Download.

10 CONNECTING TO THE INTERNET

–

An underline and an arrow indicate that

there is more text. Press down to view

to return to the

Using the Web Browser

You can use your phone to browse the Internet if

you have obtained phone Internet services from

your service provider and if over-the-air Internet

access is available in your area.

more text. Press

previous screen.

4. When you have finished using the Internet,

press to exit the browser.

Note: You cannot receive incoming calls while you

are using the Web Browser.

Using the Web menu options

The following options may appear on your screen:

Starting the Web Browser

1. Select Menu → Web Browser.

•

Home returns you to the main Web Browser

window, or home page.

A message about airtime fees appears every

time you start the browser.

Mark Site saves the current location as a

bookmark for easy access.

To cancel the message, see “Changing the Web

prompt” on page 48.

Bookmarks displays a list of your saved

Web sites.

For more information about how airtime is

charged, contact your service provider.

Setup gives you options for changing how

information is displayed.

2. Press

to continue.

–

Show URL displays the entire URL.

If this is the first time you have connected to the

Internet, a message informs you that security is

not yet enabled for your Web Browser.

About Openwave displays information

about your Web Browser version.

–

Encryption should not be used unless you

are instructed to do so by your service

provider.

3. Press

to select Yes to enable security.

When you are connected, a browser home page

appears. It has a list of bookmarks and some

Web menu options at the bottom of the screen.

UP.Link selects a different browser server.

You can use this option if you have more

than one Web Browser account.

–

appears in a secure session.

Restart restarts the Web Browser.

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

Searching for a Web site

Changing the Web prompt

1. Select Menu → Settings → Convenience →

How you search for a Web site depends on your

service provider. For more information, contact

your service provider.

WebPrompt .

2. Highlight an option and press

to select it:

–

At Start confirms that airtime fees will be

applied when you use the browser.

Bookmarking a Web site

1. Go to the site you would like to bookmark.

2. Select Mark Site from the bottom of the screen.

–

At End verifies you want to exit the browser.

Both prompts you when you start the

browser and exit the browser.

Going to a bookmarked site

1. Select Menu → Web Browser.

–

No Prompts does not use any prompts.

2. If you see a message prompt, press

to continue.

3. From your Web home page, press

right to highlight Bookmarks. A list of

bookmarks appears.

4. Enter the number corresponding to the

bookmark you want and press

Checking Net alerts

Alerts received from a Web site are sent to your Net

Alerts inbox.

1. Select Menu → Messages → Net Alerts.

This action launches the browser inbox.

2. Press

to accept browser fees.

3. Select an alert and follow the prompts.

Connecting to the Internet

Download from Www.Somanuals.com. All Manuals Search And Download.

INDEX

Numerics

1-Touch dialing, 9

erasing

contact entries, 34

text messages, 25

lights-only mode, 5, 28

set to flashing, 31

limiting calls out, 33

lock code, 33

locking

Alarm Clock, 5, 40

alerts

Fast Find, 19

fax mode, 35

finding a saved phone number, 18

flashing lights, 31

frequent contacts, 18

keypad, 10

phone, 33

for headsets, 34

for messages, 34

for missed calls, 7

analog mode, 5

auto-hyphenation, 31

memory, saving, 25

menu view, 30

games

backlighting, 31

banner, 30

Brick Attack, 44

Doodler, 44

Tetris, 43

number mode, 13

number type, 16

battery, 1

blocking outgoing calls, 33

bookmarks, 48

Brick Attack, 44

OutBox, 23

hands-free car kit

answering using voice, 38

purchasing, v

hands-free headset

and phone ringer, 34

jack, 3

phone book (Contacts directory),

phone numbers

editing, 17

finding, 19

saving, 16

verifying your own, 2

phone, unlocking, 33

portable hands-free car kit, 38

position location, 5, 36

prepend, 8, 18

Calculator, 41

call counters, 10

callback number, 21

Contacts directory, 16

contrast, 31

purchasing, v

hard pause, 17

countdown timer, 42

icons, 5

InBox, 24

data/fax setup, 10, 35

digital mode, 5

display contrast, 31

Doodler, 44

keyguard, 5, 10

keypad, locking, 10

QuickText, 21, 22, 26

emergency

language, 30

lights, 31

redialing a number, 6

resetting the phone, v

position location, 5, 36

User Guide for Kyocera Phantom Phones

Download from Www.Somanuals.com. All Manuals Search And Download.

ringers

choosing types, 28

TTY/TDD, 35

for different calls, 29

for roaming calls, 11

silencing, 2

unlocking the phone, 33

vibrate, 5, 28

Voice Answer, 38

voice dialing, 37

voicemail, 2, 9

volume

volume, 29

roaming, 5

alerts, 11

controlling, 11

ringer, 11

earpiece, 7, 10, 29

key beep, 29

ringer, 29

saved phone numbers

editing, 17

finding, 19

Scheduler, 40

Web Browser, 47

World Clock, 41

screen contrast, 31

screen icons, 5, 7, 13, 23, 28

screen savers, 32

secret contacts, 8, 16

security, 32

shortcuts, 29

silent mode, 5, 28

smileys, 21

sound files, 45

speed dialing, 8

Stopwatch, 42

symbol mode, 14

Tetris, 43

text entry, 13

quick reference, 15

text messages, 20

time format, 32

Timer, 42

timing calls, 10

Tip Calculator, 41

Index

Download from Www.Somanuals.com. All Manuals Search And Download.

Kustom Stereo Amplifier Sienna16 User Manual
La Crosse Technology Weather Radio 724 1710 User Manual
LevelOne Switch FSW 0507TX User Manual
Linear Satellite Radio DXT 21 EC User Manual
Linn Stereo Amplifier Stereo Pre Amplifier User Manual
LST Smoke Alarm PA58 3 User Manual
Majestic Appliances Indoor Fireplace UV36 User Manual
Makita Power Hammer HR5000 003101 User Manual
Maytag Iron MLI7000AAW User Manual
Metabo Power Hammer 600396420 User Manual