Download from Www.Somanuals.com. All Manuals Search And Download.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit
set by the FCC is 1.6 W/kg.* Tests for SAR are
conducted using standard operating positions
specified by the FCC with the phone transmitting at
its highest certified power level in all tested
frequency bands.
* In the United States and Canada, the SAR limit
for mobile phones used by the public is 1.6 watts/
kg (W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of
safety to give additional protection for the public
and to account for any variations in measurements.
Caution
The user is cautioned that changes or
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
modifications not expressly approved by the party
responsible for compliance could void the warranty
and user’s authority to operate the equipment.
Optimize your phone’s performance
Use the guidelines on page 1 to learn how to
optimize the performance and life of your phone
and battery.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe
exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as
required by the FCC for each model.
Air bags
If you have an air bag, DO NOT place installed or
portable phone equipment or other objects over the
air bag or in the air bag deployment area. If
equipment is not properly installed, you and your
passengers risk serious injury.
Medical devices
While there may be differences between
the SAR levels of various phones and at various
positions, they all meet the government
requirement for safe exposure.
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have
been shown to interfere with pacemakers. The
phone should be kept at least six (6) inches away
from the pacemaker to reduce risk.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this
model phone is on file with the FCC and can be
found under the Display Grant section
The Health Industry Manufacturers Association
and the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
•
Always keep the phone at least six inches
(15 centimeters) away from your pacemaker
when the phone is turned on.
http://www.fcc.gov/oet/fccid after searching on the
FCC ID: OVFKWC-KX17.
Additional information on SAR can be found on the
Cellular Telecommunications and Internet
Association (CTIA) web-site at
•
•
•
Do not carry your phone near your heart.
Use the ear opposite the pacemaker.
If you have any reason to suspect that
interference is taking place, turn off your phone
immediately.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your service
provider or call the customer service line to discuss
alternatives.
•
•
•
•
transfer or storage facilities for fuel or
chemicals
vehicles using liquefied petroleum gas, such as
propane or butane
areas where the air contains chemicals or
particles such as grain, dust, or metal powders
any other area where you would normally be
advised to turn off your vehicle engine
Other medical devices—If you use any other
personal medical device, consult the manufacturer
of the device to determine if it is adequately
shielded from external RF energy. Your physician
may be able to help you obtain this information.
Use with care
Use only in normal position (to ear). Avoid
dropping, hitting, bending, or sitting on the phone.
In health care facilities—Turn your phone off in
health care facilities when instructed. Hospitals
and health care facilities may be using equipment
that is sensitive to external RF energy.
Keep phone dry
If the phone gets wet, turn the power off
immediately and contact your dealer. Water
damage may not be covered under warranty.
Potentially unsafe areas
Posted facilities—Turn your phone off in any facility
when posted notices require you to do so.
Resetting the phone
If the screen seems frozen and the keypad does
not respond to keypresses, reset the phone by
completing the following steps:
Aircraft—FCC regulations prohibit using your
phone on a plane that is in the air. Turn your phone
off or switch it to Airplane Mode before boarding
aircraft.
1
2
Remove the battery door.
Remove and replace the battery.
Vehicles—RF signals may affect improperly
installed or inadequately shielded electronic
systems in motor vehicles. Check with the
manufacturer of the device to determine if it is
adequately shielded from external RF energy.
If the problem persists, return the phone to the
dealer for service.
Accessories
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will invalidate
the phone warranty if said accessories cause
damage or a defect to the phone.
Blasting areas—Turn off your phone where blasting
is in progress. Observe restrictions, and follow any
regulations or rules.
Potentially explosive atmospheres—Turn off your
phone when you are in any area with a potentially
explosive atmosphere. Obey all signs and
To shop online for phone accessories, visit
To order by phone, call 800-349-4188 (U.S.A. only)
or 858-882-1410.
instructions. Sparks in such areas could cause an
explosion or fire, resulting in bodily injury or death.
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked. They
include:
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power
of the RF signal. This power level can range from
0.006 to 0.6 watts.
•
•
fueling areas such as gas stations
below deck on boats
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
In August 1996, the U.S. Federal Communications
Commission (FCC) adopted RF exposure
guidelines with safety levels for hand-held wireless
phones. These guidelines are consistent with the
safety standards previously set by both U.S. and
international standards bodies in the following
reports:
Customer support
Your service provider’s customer support
department may be accessible directly from your
phone when you dial a number such as *611. They
can answer questions about your phone, phone
bill, call coverage area, and specific features
available to you, such as call forwarding or
voicemail.
ANSI C95.1 (American National Standards
Institute, 1992)
For questions about the phone features, refer to
the materials provided with your phone, or visit
NCRP Report 86 (National Council on Radiation
Protection and Measurements, 1986)
ICNIRP (International Commission on Non-Ionizing
Radiation Protection, 1996)
For additional questions, you may contact the
Kyocera Wireless Corp. Customer Care Center in
one of the following ways:
Your phone complies with the standards set by
these reports and the FCC guidelines.
Web site: www.kyocera-wireless.com
Email: [email protected]
E911 mandates
Telephone: 1-800-349-4478 (U.S. and Canada) or
1-858-882-1401.
Customer support phone numbers are also
available in the following countries.
Where service is available, this handset complies
with the Phase I and Phase II E911 Mandates
issued by the FCC.
Battery and charger specifications
Argentina:
Australia:
Brazil:
0-800-666-0052
1-800-507-000
Charger
Input
Output
0-800-55-2362
CV90-60858
100-240 VAC 50/60 Hz
100-240 VAC 50/60 Hz
100-240 VAC 50/60 Hz
100-240 VAC 50/60 Hz
100-240 VAC 50/60 Hz
100-240 VAC 50/60 Hz
100-240 VAC 50/60 Hz
100-240 VAC 50/60 Hz
100-240 VAC 50/60 Hz
4.5 V 1.5 A
4.5 V 1.5 A
4.5 V 1.5 A
4.5 V 1.2 A
4.2 V 0.6A
4.2 V 0.6A
V 0.6A
Chile:
800-43-1212
CV90-61139
Colombia:
India:
01-800-700-1546
Toll free:1-600-121214
Toll: 0124-284-5000
001-866-650-5103
CV90-61017
CV90-G2926
CV90-K0281
CV90-K0283
CV90-K0284 4.2
CV90-K0285 4.2
CV90-K0282 4.2
Mexico:
New Zealand: 0-800-990-100
Panama:
Peru:
001-800-201-1984
0-800-51-934
V 0.6A
V 0.6A
Puerto Rico: 1-866-664-6443
Venezuela: 0-800-100-2640
Standard Battery
CV90-M4337-01, 3.7 V / 810 mAh
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
v
Before requesting support, please try to reproduce
and isolate the problem. When you contact the
Customer Care Center, be ready to provide the
following information:
•
•
The name of your service provider.
The actual error message or problem you are
experiencing.
•
•
The steps you took to reproduce the problem.
The phone’s electronic serial number (ESN).
To find the ESN select Menu → Phone Info.
Qualified service
If the problem with your phone persists, return the
phone with all accessories and packaging to the
dealer for qualified service.
Become a product evaluator
To participate in the testing and evaluation of
Kyocera Wireless Corp. products, including cellular
or PCS phones, visit beta.kyocera-wireless.com.
093 453 037
Kyocera Wireless Corp.
10300 Campus Point Drive, San Diego, CA 92121
U.S.A.
Visit us at www.kyocera-wireless.com
To purchase accessories, visit
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Creating a secure environment . . . . . . . . . . . . . 29
Network settings . . . . . . . . . . . . . . . . . . . . . . . . 31
1
Getting Started. . . . . . . . . . . . . . . . . . . . . 1
Installing the battery . . . . . . . . . . . . . . . . . . . . . .1
Getting to know your phone . . . . . . . . . . . . . . . .3
Using menus . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Performing basic functions . . . . . . . . . . . . . . . . .5
7
8
Fun & Games . . . . . . . . . . . . . . . . . . . . . 32
Brick Attack . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Race 21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
My Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Saving memory . . . . . . . . . . . . . . . . . . . . . . . . . 33
2
Making and Answering Calls . . . . . . . . . 6
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Using the speakerphone . . . . . . . . . . . . . . . . . . .7
Viewing recent calls . . . . . . . . . . . . . . . . . . . . . .7
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Setting up voicemail . . . . . . . . . . . . . . . . . . . . . .9
Silencing an incoming call . . . . . . . . . . . . . . . . .9
Calling emergency services . . . . . . . . . . . . . . . .10
Locking the keypad . . . . . . . . . . . . . . . . . . . . . .10
Controlling network roaming . . . . . . . . . . . . . .11
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3
Storing Contacts . . . . . . . . . . . . . . . . . . 12
Creating a new contact . . . . . . . . . . . . . . . . . . .12
Editing or erasing a contact . . . . . . . . . . . . . . . .12
Editing a phone number . . . . . . . . . . . . . . . . . .13
Finding contact information . . . . . . . . . . . . . . .13
4
5
Entering Text, Numbers,
and Symbols . . . . . . . . . . . . . . . . . . . . . 15
Sending and Receiving
Text Messages . . . . . . . . . . . . . . . . . . . . 18
Sending text messages . . . . . . . . . . . . . . . . . . . .18
Retrieving text messages . . . . . . . . . . . . . . . . . .20
Customizing message settings . . . . . . . . . . . . . .22
6
Customizing Your Phone . . . . . . . . . . . 24
Silencing all sounds . . . . . . . . . . . . . . . . . . . . .25
Choosing ringers . . . . . . . . . . . . . . . . . . . . . . . .25
Adjusting volume . . . . . . . . . . . . . . . . . . . . . . . .25
Setting message alerts . . . . . . . . . . . . . . . . . . . .26
Using shortcuts . . . . . . . . . . . . . . . . . . . . . . . . .27
Personalizing the screen . . . . . . . . . . . . . . . . . .27
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
1
GETTING STARTED
Installing the battery
Your phone comes with a removable lithium ion
(LiIon) battery.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls. Fully charge the
battery before using the phone.
1. Hold the phone with the back facing you.
To charge the battery, connect
the AC adapter to the jack on the
bottom of the phone, then plug
the adapter into a wall outlet.
2. Unsnap the battery
door by using the latch
located at the bottom
of the battery door.
The battery icon in the upper-
right corner of the screen tells
you whether the phone is:
3. Place the battery in the
phone casing with the
metal contacts toward
the bottom of the
phone.
•
•
•
Charging (the icon is animated)
Partially charged
Fully charged
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
4. Place the battery door tabs in the openings on
the side of the phone.
Caring for the battery
5. Press the battery door
until it snaps into place.
General safety guidelines
•
Do not take apart, puncture, or short-circuit
the battery.
•
If you have not used the battery for more than
a month, recharge it before using your phone.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
1
•
•
Avoid exposing the battery to extreme
temperatures, direct sunlight, or high
humidity.
Never dispose of any battery in or near a fire –
it could explode.
The phone is not receiving a signal. You
cannot make or receive calls.
The phone is roaming outside of its
home service area.
You have a voice message.
Common causes of battery drain
The battery is fully charged. The more
black bars, the greater the charge.
•
•
•
Playing games.
Keeping backlighting on.
Operating in digital mode when far away from
a base station or cell site.
The alarm clock is set.
The phone is in privacy mode.
The phone is at the home screen. To
•
•
Using accessories.
Operating when no service is available, or
service is available intermittently.
access Menu, press
.
The phone is set to light up instead of
ring.
The phone is set to vibrate or to vibrate
and then ring.
•
•
•
High earpiece and ringer volume settings.
Repeating sound, vibration or lighted alerts.
Long conversation.
Keyguard is on. The keypad is locked.
Understanding screen icons
These icons may appear on your phone’s home
screen.
The phone is operating in IS95 digital
mode.
The phone is operating in IS2000 (1X)
digital mode.
The phone is receiving a signal. You can
make and receive calls. Fewer bars
indicate a weaker signal.
A call is in progress.
2
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to know your phone
Home screen.
1
2
3
4
5
6
7
Speakerphone key activates the speakerphone.
Send/Talk key starts or answers calls.
Keypad for entering numbers, letters, or symbols.
* Shift key changes the text mode in text entry.
Jack for hands-free headset and data cable (sold separately)*.
Navigation key positions cursor during text entry. Scrolls
through menu lists.
OK key selects a menu item or option.
8
9
Back key accesses menu options, erases characters in text
entry, returns to previous screen.
End/Power key turns the phone on and off. Ends a call.
# Space key enters a space during text entry.
0 Next key cycles through word choices during text entry.
Jack for AC adapter (included)*.
10
11
12
13
*Warning: Inserting an accessory into the incorrect jack will damage the phone.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Using menus
The contents of the main menu are as follows:
Recent Calls
All Calls
Incoming Calls
Outgoing Calls
Missed Calls
Erase Lists
Contacts
View All
Add New
Messages
Voicemail
New Text Msg
InBox
OutBox
Saved Msgs
Drafts
Erase Msgs
Group Lists
Msg Settings
Settings
Silent Mode
Keyguard
Sounds
Display
Security
Call Information
Network
Convenience
Msg Settings
Accessories
Fun & Games
Brick AttackTM
Phone Info
Your number:
SW Version:
PRL Version:
Factory config:
ESN:
Technology:
SID:
Icon Key:
Race 21TM
My Sounds
Tools
Scheduler
Alarm Clock
Tip Calculator
Calculator
World Clock
Timer
Find Name
Speed Dial List
Business List
Personal List
Information
Stopwatch
•
Press
Press
menus and options*.
to select Menu.
left, right, up, or down to view
In this guide, an arrow → tells you to select an
option from a menu. For example, Menu →
Settings means select Menu, then select the
Settings option.
•
•
•
•
Press
Press
Press
to select a menu item.
* To change the way the menus appear, select
to back up a menu level.
Menu → Settings → Display → Main Menu View,
to return to the home screen.
then select Graphic, or List and press
. See
“Choosing a menu view” on page 28 for details.
4
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing basic functions
To...
From the home screen...
Turn the phone on
Turn the phone off
Make a call
Press
Press and hold
Enter the number, and press
and wait until the phone chimes.
until the phone beeps.
.
End a call
Press
Press
.
.
Answer a call
Access voicemail
Verify your phone number
Press and hold
and follow the system prompts.
Select Menu → Phone Info.
Silence the ringer on an
incoming call
Press
-or-
, then
to answer.
Press
up or down, then
to answer.
Access contacts list
Silence all sounds
Lock the keypad
Press
Press
Press
Press
down.
right.
left.
Access your shortcut
up. See “Defining the feature shortcut (up)” on page 27.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
5
2
MAKING AND ANSWERING CALLS
Making a call
1. Make sure you are in an area where a signal
Answering calls
When a call comes in, the phone rings and
can be received. Look for
screen.
Note: The more bars you see in this symbol,
the stronger the signal. If there are no bars,
move to where the signal strength is better.
on the home
“
Incoming Call” appears on the screen.
The phone number of the caller also appears if it
is not restricted. If the number is stored in your
Contacts directory, the contact name appears.
To answer the call:
2. Enter the phone number.
•
Press
to answer the incoming call
3. Press
.
-or-
•
4. Press
to end the call.
Press
to answer the incoming call and
turn on the speakerphone.
Redialing a number
To redial the last number called, received, or
To silence or ignore the call
When an incoming call is received, you can
choose to do one of the following:
missed, press
three times.
Calling a saved number
If you have already saved a phone number, you
can use the Contacts list to find it quickly.
•
•
•
Press
Press
down to silence the ringer.
to silence the ringer.
Press
call.
. Then press
to answer the
1. Press
down to view all Contacts.
2. Scroll down the list to find the contact you
•
Select Ignore Call to immediately send the
caller to voicemail. Missed Call appears on
your screen until the caller leaves a message.
Note that in the absence of voicemail, this
feature drops the call.
want to call.
3. Highlight the name and press
to dial
the number.
Note: If the contact has more than one phone
number assigned to it, press to select the
contact’s name, highlight the phone number you
want to call, and press
.
6
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the volume during a call
Setting missed call alerts
•
To adjust the earpiece volume during a call,
press up or down.
You can set an alert to beep every five minutes
after you have missed a call.
•
Select Menu → Settings → Sounds →
Missed Call → Enabled.
Using the speakerphone
Your Kyocera Prisma phone has a built-in
speakerphone that you can use during a call. This
function works only for the current call. Once the
call is ended, the speakerphone turns off and
earpiece volume returns to normal.
Viewing recent calls
Details on the last calls you made, received, and
missed (10 each, 30 total) are stored in the Recent
Calls list and are identified by the following icons:
Turn on the speakerphone
Outgoing call
Incoming call
Forwarded call
Conference call*
•
•
Press
prior to making a call.
Missed call
(flashing)
During an incoming call alert, press
to
answer the call and turn on the speakerphone
simultaneously.
•
Once the speakerphone is turned on,
displays on the screen.
Recent call details
Turn off the speakerphone
Press to turn off the speakerphone.
1. To view details of recent call, select Menu →
•
Recent Calls.
2. Select from All Calls, Incoming Calls,
Dealing with missed calls
Outgoing Calls, and Missed Calls.
When you have missed a call, “Missed Calls”
appears on your screen unless the caller leaves a
voicemail.
3. Select a recent call and press
.
Select from the following:
–
Time displays the time the call was made,
•
•
To clear the screen, press
To return the call, highlight Missed Calls,
press then press
.
received, or missed and its duration.
–
Number displays the phone number of
.
the call.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
7
–
Prepend allows you to add an area code to
the number if you plan to save the number
as a contact.
Erasing recent calls
1. Select Menu → Recent Calls → Erase Lists.
2. Select an option: Incoming Calls, Outgoing
–
–
Send Msg allows you to send a text
message to the phone number.
Calls, Missed Calls or Erase All.
3. Press
right and press
to select Yes.
Save New adds the phone number to the
Contacts list.
or
View Contact allows you to view the contact
information to make changes, if necessary.
Speed dialing
Speed dialing allows you to quickly dial a stored
phone number by entering a one- or two-digit
speed dialing location number and pressing
.
–
–
Add to adds the phone number to a
saved contact.
Note: Before you can use speed dialing, you must
save a phone number as a contact and assign a
speed dial location to it.
Erase deletes the call from the list of
recent calls.
Note: If the phone number has been classified as
“secret,” you must enter your four-digit lock code
to view or edit it. For information on the lock
code, see “Changing your lock code” on page 29.
To classify a phone number as secret, see
“Creating a new contact” on page 12.
Refer to “Creating a new contact” on page 12 to
create a new contact, or “Editing or erasing a
contact” on page 12 to add speed dial to an
existing contact.
Using speed dialing
To call a contact that has a speed dial location:
Calling recent calls
•
From the home screen, enter the one- or two-
digit speed dialing location and press
1. Select Menu → Recent Calls.
2. Select a list: All Calls, Incoming Calls,
.
Outgoing Calls, or Missed Calls.
1-Touch dialing
1-Touch dialing is the fastest way to speed dial a
contact that has a speed dial location.
3. Select a recent call.
4. Highlight the number you want to call.
5. Press
.
Note: You must (1) enable 1-Touch dialing on
your phone and (2) have a speed dial location
assigned to a contact.
8
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
See “Enabling 1-Touch dialing,” and “Using 1-
Touch dialing”on this page.
Checking voicemail messages
When a voice message is received, your screen
displays “
the
1 New Voicemail(s)” along with
symbol at the top of your screen.
Enabling 1-Touch dialing
1. Select Menu → Settings → Convenience →
The symbol flashes if the message is urgent.
1-Touch Dialing → Enabled.
If you see “ 1 New Voicemail(s)”
2. Press
.
1. Press
to select Call, which initiates a call
Using 1-Touch dialing
to your voicemail number.
To call a contact that has a speed dial location:
2. Follow the prompts to retrieve the message.
•
From the home screen, press and hold the
speed dialing number. If it is a two-digit
number, press the first digit briefly, then press
and hold the second digit. For example, if the
speed dialing location is 15, press
To clear the screen without checking messages:
•
Press
right and press
to select
Ignore.
If you see only the
symbol
to initiate a call to your
briefly, then press and hold
.
1. Press and hold
voicemail number.
Setting up voicemail
2. Follow the prompts to retrieve the message.
Before your phone can receive voicemail
messages, you must set up a password and record
a personal greeting with your service provider.
When you have set up your voicemail, all
unanswered calls to your phone are automatically
transferred to voicemail, even if your phone is in
use or turned off.
•
You can set the phone to beep or vibrate every
five minutes to remind you that you have
voicemail. See “Setting message alerts” on
page 26.
Silencing an incoming call
•
To silence an incoming call quickly, press
. Then press to answer the call.
1. From the home screen, press and hold
2. Press at the message.
.
This action silences the current call only. The next
call will ring as normal.
3. Follow the system prompts to create a
password and record a greeting.
Note: If you are having trouble accessing your
voicemail, contact your service provider.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
9
–
–
All Calls Timer—Tracks all calls you have
made and received. This timer cannot be
reset.
Calling emergency services
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described below.
Reset All Timers—Resets timers for all
recent, home, and roam calls.
•
Dial your 3-digit emergency code and
press
.
Timing your calls
You can set your phone to beep 10 seconds
before each minute passes when you are on a call.
You can call the code even if your phone is locked
or your account is restricted. When you call, your
phone enters Emergency mode. This enables the
emergency service exclusive access to your phone
to call you back, if necessary. To make or receive
regular calls after dialing the code, you must exit
this mode.
•
Select Menu → Settings → Sounds →
Minute Alert → Enabled.
Locking the keypad
The Keyguard locks your keypad to prevent
accidental key presses when the phone is turned
on and a call is not in progress. You can still
answer or silence an incoming call.
To exit Emergency mode
When you have completed the emergency call:
1. Press
to select Exit.
•
To lock the keypad from the home screen,
press left and hold.
2. Press
again to confirm your choice.
•
To unlock the keypad, press
in this order.
Tracking calls
You can track the number and duration of calls
made and received on your phone.
Changing the keyguard setting
1. SelectMenu→Settings→Call Information →
1. Select Menu → Settings → Keyguard.
Call Timers.
2. Highlight an option. You can set the phone to
lock the keypad immediately, or automatically
if no key is pressed after 30 seconds,
1 minute, or 5 minutes.
2. Select a timer:
–
Recent Calls—Tracks all calls you have
made and received since you last reset this
timer. To reset this timer to zero, select
•
Press
to save.
Reset and press
.
10
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Call Guard to avoid roaming
calls
Controlling network roaming
Setting an alert for roaming
You can set the phone to warn you before you
answer or place a call while roaming.
You may use this setting if you want the phone to
alert you when you roam outside of your home
service area.
•
Select Menu → Settings → Convenience →
Call Guard → Call prompt.
1. Select Menu → Settings → Network →
–
The phone now emits a distinctive roam
alert to indicate when you are roaming
during calls.
Roam/Svc Alert.
2. Select an option and press
.
–
–
–
When no svc alerts you with three tones
–
To accept or place a call while roaming,
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
you must press
.
Note: This functionality is disabled when the
phone is in emergency mode.
Roam Change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
Turning roaming on or off
This setting allows you to control the phone’s
roaming feature by specifying which signals the
phone will accept.
Any Change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones
if the phone loses service.
1. Select Menu → Settings → Network →
Roam Option.
2. Select an option and press
.
Setting the roam ringer
–
Automatic (recommended setting)
accepts any system the phone service
provides.
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
–
No roaming prevents you from making
or receiving calls outside of your home
service area.
1. Select Menu → Settings → Sounds →
Roam Ringer.
2. Highlight Enabled to hear the ringer.
Note: If your phone has more than one setting for
Automatic, contact your service provider to
determine which one to use.
3. Press
to set.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
11
3
STORING CONTACTS
Use your phone’s Contacts directory to store
information about a person or company. Your
phone can hold, on average, about 200 phone
numbers.
–
Classify Contact as Personal, Business,
or Neither. (See page 25 to set the phone
to ring differently for personal and
business calls.)
5. Select Save when done.
Creating a new contact
Adding a code or extension
1. From the home screen, enter the phone
number you want to save, including the
area code.
When you save the phone number of an
automated service, you may include a pause
where your phone would stop dialing; for
example, where you would wait to dial an
extension.
Note: To save a contact without entering a
phone number, select Menu → Contacts →
Add New, select an option, and skip to step 3.
1. Enter the first portion of the phone number.
2. Select Save New.
2. Press
right and select a type of pause:
3. Enter a name for the contact. If you need to
–
Time Pause—Stops dialing for two
learn how to enter letters, see page 15.
seconds, then continues to dial.
4. Press
right twice and select Options to
–
Hard Pause—Stops dialing until you
add information to the contact’s number.
select Release.
–
–
–
–
–
Assign or Unassign Ringer to identify an
incoming call from this contact.
3. Enter the remaining numbers.
4. Select Save New and follow the prompts.
Number Type to designate a number as
Work, Home, Mobile, Pager, or Fax.
Editing or erasing a contact
To make changes to a contact, take these steps.
1. Select Menu → Contacts.
Speed Dialing to assign a speed dial
number to your phone number.
Secret hides the number from view in the
contacts list and other areas of the phone.
2. Select View All or Find Name to find the
contact you want to edit.
Primary Number assigns phone number as
primary number for contact.
3. Highlight the contact to edit and press
.
12
Storing Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select Options.
–
Secret to make the number secret so that
it will not appear on the screen until the
lock code is entered. Secret numbers can
be called without a lock code. (For more
information, see “Restricting calls” on
page 30.)
5. Highlight an option and press
to select it:
Assign Ringer, Unassign Ringer, Erase
Contact, Edit Name, or Classify Contact.
Editing a phone number
1. Select Menu → Contacts.
2. Select View All or Find Name to find the
–
–
Primary Number to make this number
the first one that shows up when you open
the contact.
contact you want to edit.
Prepend to move the cursor to the
beginning of the number so you can add
the area code.
3. Highlight the contact to edit and press
.
4. Press
number or email address you want to edit and
press
5. Choose from the following options:
down to highlight the phone
6. Enter the new information and follow the
.
prompts.
7. Select Save, if necessary.
–
–
–
–
Send Text Message to send a text message
to that number or email address.
Finding contact information
View Number to see the phone number
you selected.
To find a phone number or contact, you can (1)
check the frequent contacts list, (2) search the
Contacts directory, or (3) use Fast Find.
Speed Dialing to assign or remove the
location you use to speed dial the number.
Checking the Frequent List
Edit Type to assign a type: work, home,
mobile, pager, or fax. The type icon
appears next to the phone number in the
Contacts list.
Press
down. The last 15 of your most
frequently called contacts appear when the
Frequent List is enabled. Scroll past the double
line for an alphabetical list of all contacts.
–
–
Erase Number to erase the number from
the contact.
To enable the Frequent List setting
Edit Number to change the phone number.
•
Select Menu → Settings → Convenience →
Frequent List → Enabled.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
13
To use Fast Find
Searching the Contacts directory
1. From the home screen, press the keys
corresponding to the letters of the name you
want to find. A matching contact appears.
Press
down for a list of all contacts.
To quickly get down the list, enter the first letter
of the contact. The menu skips to that letter
of the alphabet.
2. When the name you want is displayed, press
to select View.
-or-
3. Press
then press
down to select the number,
to call.
1. Select Menu → Contacts.
2. Select from the following:
–
–
View All—List all contacts.
Find Name—Locate a specific name.
Enter part of the contact name, then
select Find.
–
Speed Dial List, Business List, or
Personal List—Select a contact from
a list.
3. Scroll down until you find the name you want,
then press
To call the contact, highlight the number
and press
.
–
.
Using Fast Find
To set Fast Find
With Fast Find, you press one or two keys to view
close matches of the number you are looking for.
•
From the home screen, select Menu →
Settings → Convenience → Fast Find →
Enabled.
14
Storing Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
4
ENTERING TEXT, NUMBERS, AND SYMBOLS
You can enter letters, numbers, and symbols in
Contacts, text messages, and your banner.
Entering numbers
•
•
To enter a number while in
a number key once.
mode, press
or
Understanding text entry
screens
The current text entry mode (and capitalization
setting, when applicable) are indicated by icons.
To enter a number while in
mode, press and hold a number key until the
number appears on the screen.
Entering words letter by letter
text entry
field
Use normal alpha to enter letters.
1. Press a key once for the first letter, twice for
the second letter, and so on. If your phone is
set to Spanish, accented letters are available.
text entry
mode
2. Wait for the cursor to move right and enter the
next letter.
Text entry modes
There are five text entry modes:
Case change
Entering words quickly
When you press a series of keys using
mode,
checks its dictionary of common words and
guesses at the word you are trying to spell.
Normal alpha
Rapid Entry
1. For each letter of the word you want, press the
Numbers only
key once. For example, to enter the word
Add Symbol
“any” press:
2. If the word doesn’t match what you want,
press to look at other word matches.
3. When you see the word you want, press
→
→
.
Note: The mode you start in depends on the task
you are doing. For example, when entering a
phone number, you’re in number mode. When
entering a name for a contact, you’re in normal
text mode.
.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
15
To change text entry modes, you can
either:
Entering symbols
While entering text, you can enter symbols by
•
Press and hold
until the icon for the
pressing
until you see the symbol you
mode you want appears.
want. Using this method, you have access to the
following symbols:
-or-
.
& @ ,
1
‘
:
?
•
Highlight
, press
and scroll
through the options.
To access the full set of symbols:
1. Select
2. Select
3. Press
.
Capitalization settings
Three capitalization settings are available in
Symbols and press
.
up or down to view the list of
and
modes:
symbols.
Capitalize next letter
Lower case next letter
4. Press the number key corresponding to the
symbol you want.
Switching default text entry modes
Capitalize first letter of every word (in a
contact) or sentence (in a text message)
You can change the default text entry mode when
creating a text message. This setting applies only
to the message body screen, not the “To” screen.
If no icon appears, all letters will be in lower case.
To change capitalization settings:
1. Select Menu → Messages → Msg Settings →
•
Press
until the icon for the setting you
Default Text.
want appears.
2. Select Normal Alpha or Rapid Mode.
Changing modes
Sometimes you need to change modes. For
example, to enter numbers in an email address
while in
mode, enter the numbers, and then change
back to mode to complete the address.
mode, you must change to
16
Entering Text, Numbers, and Symbols
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick reference to text entry
This table gives general instructions for entering letters, numbers, and symbols.
To...
Do this...
Enter a letter
Use
mode and press a key until you see the letter you
want. For more information, see page 15.
Use mode and press a key once to enter its number.
For more options, see page 15.
Enter a number
Enter a symbol
Press
until you find the symbol you want. See
page 16.
Enter a space
Press
Press
.
Erase a character
.
Erase all characters
Press and hold
Press up or down.
Press and hold
.
Move the cursor right or left
Change text entry modes
Change to uppercase
Change to lowercase
Select soft options on the screen
.
In
mode, press
. Choose
. Choose
.
In
mode, press
.
.
Press
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
17
5
SENDING AND RECEIVING TEXT MESSAGES
This chapter describes how to send, receive, and
erase text messages from your phone. For
3. To add another recipient to this message,
choose a method:
information on voicemail messages, see page 9.
–
Scroll right to Options and press
Select Recent List, Contacts, or
Group Lists.
.
Important: The features and menus described in
this chapter may vary depending on services
available in your area. In addition, usage charges
may apply to each message. For details, check
with your service provider.
- or -
–
Enter a space after the first number. Then
enter another recipient manually.
Note: You can send a message to up to 10
recipients at once. The messages will be sent
one at a time, once to each addressee.
Sending text messages
You can only send text messages to phones that
are capable of receiving them.
Note: You can not send messages to secret
numbers.
Creating a text message
4. When you are done entering addresses,
1. Select Menu → Messages → New Text Msg.
2. Select an address to enter the recipient’s
select Next.
5. Enter the message. To learn how to enter text,
phone number or email address:
see page 15.
–
Select a saved number from the Recent
List or Contacts List, or select from the
Group Lists you have created. For more
about group lists, see page 22.
–
To add smileys or prewritten text, press
right to Options and press
Select Insert... → Smileys or AutoText.
.
6. Once you have completed the message, select
Send to send the message immediately.
- or -
–
Enter a New Address manually.
(To learn how to enter text, see page 15.)
18
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Scroll down to select:
8. When you have finished setting options, press
to return to the message window.
–
Add Address—Return to the “To” screen
to add another recipient without losing the
message text. Enter the new address, then
select Next to return to the message entry
screen.
9. Press
to send the message.
Adding a signature
The signature you create does not display in the
message creation screen; however, the signature
is included at the end of all outgoing messages
and is counted as characters in your messages.
–
Msg Receipt—Request a receipt that the
recipient received the message. (This
service may not be available. Check with
your service provider.)
To create a signature:
1. Select Menu → Messages → Msg Settings →
–
–
Set Priority—Label the message as
“Urgent.”
Signature.
2. Enter your signature in the text field.
Callback Number—Include a callback
number with the message to let the
recipient know at what number they can
call you back. Select Yes to include your
own number, Edit to enter a different
callback number, or No to cancel the
callback number.
3. Select
to save the setting.
If you cannot send messages
You may not be able to send or receive messages
if your phone’s memory is nearly full, or if digital
service is not available at the time. To free up
memory, erase old messages. See “Erasing
messages” on page 21.
–
–
Send Later—Schedule when to send
the message.
Save Message—Save the message in
your Drafts folder. This prevents the
message from being deleted if you have
activated AutoErase, and enables you to
send the message to others.
Receiving incoming calls while
creating messages
•
If you don’t wish to answer the call, select
Ignore. The phone returns to the message
screen.
–
Save AutoText—Save the message you
have just entered as a prewritten message,
then return to the message entry screen so
you can send the message.
•
To answer the call, press
. Your message
is saved to the Drafts folder. To return to the
message, select Menu → Messages → Drafts
and select Resume.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Viewing the OutBox
The message cannot be sent
because service is not available. An
alert appears on your phone if the
message cannot be sent.
You can check the status of messages you have
sent as long as they have been saved to the
OutBox.
To set the OutBox
The scheduled message has been sent
and will be delivered as scheduled. You
cannot cancel delivery of the message.
The OutBox default is set to disabled to conserve
memory. If you want to save your sent messages:
•
Select Menu → Messages →
Msg Settings → Save to OutBox.
The message has been received by the
recipient you specified.
–
Select Enabled to save all sent messages to
the OutBox.
The message has been received and
opened by the recipient you specified.
(This symbol may not be available.
Check with your service provider.)
–
Select Prompt to alert you to choose
whether or not to save your message.
To view the OutBox
The message has been sent to more
than one recipient.
1. Select Menu → Messages → OutBox.
2. Press
up or down through the list of
messages. One of the following symbols
appears next to each message:
Retrieving text messages
When a text message is received, your screen
displays “
the
1 New Text Message(s)”, along with
symbol at the top of your screen. The
The message is pending and will be sent
when possible. You can cancel delivery
of the message.
symbol flashes if the message is urgent.
If you the
note
You can choose to:
“1
New
Text
The scheduled message will be sent at
the scheduled time. You cannot cancel
delivery of the message.
•
•
View the message—Press
Ignore the message—Press
press
.
right, then
.
20
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If you receive a new message while you are
reading a message, the one you are reading will
be replaced by the new one. You can find the
older message in the InBox:
–
Save New Address to save the sender’s
phone number or email address in your
Contacts list.
–
–
Forward to forward the message.
Select Menu → Messages → InBox.
Reply with Copy to reply to the message
with a copy of the original attached.
If you see the
symbol
–
Save AutoText to save the text from the
message as AutoText, which you can insert
into other messages. Graphics and sound
will not be saved as part of AutoText.(For
more about AutoText, see page 23.)
If the
urgent.
symbol is flashing, the message is
1. Select Menu → Messages → InBox.
A list of all your received messages appears.
New, unread messages appear in italics.
3. Select Done.
indicates an “Urgent” message.
Setting message alerts
2. Press
up or down to scroll through the
to read a message.
list of messages.
You can set your phone to alert you of incoming
text messages or pages. For more information,
see “Setting message alerts” on page 26.
3. Press
Reading the message
The options available to you may vary. Check with
your service provider.
Erasing messages
Your phone is designed to store 50 text messages
and pages. It is a good idea to erase old messages,
as messages take up memory in your phone.
Note: Sounds embedded in text messages will not
play if the phone is set to Silent Mode.
You have the option of erasing text messages and
pages as you send or read them, erasing them one
at a time from the list in the OutBox or InBox, or
erasing them all at once.
1. If the text message is long, press
down
to view the entire message.
2. When you are finished, you can Reply to the
sender, Play the sound embedded in the
message, Erase the message, Save the
message to your Saved folder, or set additional
Options for the message:
–
View Sender information.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
21
2. Highlight Old InBox Msgs and press
.
Erasing single messages
Older messages will now be erased as new
messages are received.
1. Select Menu → Messages.
2. Press
message you want to erase: InBox, OutBox,
Saved Msgs, or Drafts.
down to find the type of text
•
To disable this setting select Menu →
Messages → Msg Settings → Auto-Erase →
Disabled.
3. Press
.
4. Highlight the message to erase and press
.
Customizing message settings
To make messaging easier, you can customize
settings for sending and receiving messages.
5. Press
to select Erase. A notification
appears: “Erase this message?”
6. Select Yes to erase the message.
Creating group lists
Note: You can erase a scheduled message from
the OutBox, but you cannot cancel delivery of the
message.
You can create and save a list of multiple
recipients. Your Kyocera Prisma phone stores five
group lists with up to 10 recipients per list.
Erasing all messages
1. Select Menu → Messages → Group Lists →
Create New.
1. Select Menu → Messages → Erase Msgs.
2. Enter a name for the list. For help entering
2. Select a folder to erase all messages from:
InBox, OutBox, Saved Folder, or Drafts. To
erase messages from all folders,
select All Messages.
text, see page 15.
3. Press
to select Next.
4. To enter the first phone number or email
3. A message appears: “Erase all messages?”
address, select an option:
Select Yes to erase messages or No to cancel.
–
–
–
Recent List to select numbers from your
Recent List.
Erasing messages automatically
New Address to enter the phone number
or email address manually.
Use this setting to have old messages
automatically erased from the InBox when
memory is low.
Contacts List to select numbers or email
addresses from your phone book.
1. Select Menu → Messages → Msg Settings →
Auto-Erase.
5. Select Options to select the next number.
22
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select Recent List or Contacts then the
contact to add.
7. When finished, select Done.
8. To send a message to your new group, see
“Sending text messages” on page 18.
Creating and editing prewritten
messages (AutoText)
Your phone comes with prewritten (AutoText)
messages, such as “Please call me,” which you
can insert into the body of a text message. You can
create new ones. Your phone will store up to 40
AutoText messages, with up to 100 characters per
message.
1. Select Menu → Messages →
Msg Settings → Edit AutoText.
2. To create a new pre-written message,
select New AutoText.
-or-
To edit an existing pre-written message,
highlight the message and press
.
3. Enter or edit the text and press
to select
Done. For help entering text, see page 15.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
23
6
CUSTOMIZING YOUR PHONE
The contents of the Settings menu are as follows.
Silent Mode
Vibrate Only
Display
Backlighting
Network
Privacy Alert*
Accessories
Pwr Backlight
Vibrate, Ring
Lights Only
Norm. Sounds
My Banner
Main Menu View
Screen Saver
Wallpaper
Color Themes
Auto-Hyphen
Language
Set Phone Line*
Roam/Svc Alert
Roam Option*
Headset Ring
Auto-Answer
TTY Device
Keyguard
Guard Now
30s autogrd
1m autogrd
5m autogrd
Disabled
Convenience
Shortcut Key
Fast Find
Frequent List
1-Touch Dialing
Call Guard
Time Format
Contrast
Security
Lock Phone
Sounds
Ringer Volume
Msg Settings
Voicemail Num.
Limit Calls
Ringer Type
Alerts
Lock Code
Erase Contacts
Emergency #’s
Business Ring
Personal Ring
Roam Ringer
Earpiece Volume
Spkrphone Vol.
Key Volume
Signature
Edit AutoText
Callback Number
Msg Receipt**
Save to OutBox
Auto-Erase
Call Information
Call Timers
Recent Calls
Key Length
Missed Call
All Calls Timer
Reset All Timers
Default Text
Smart Sound
Minute Alert
*Not available on all phones. Check with your service provider.
**This service may not be available. Check with your service provider.
24
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Silencing all sounds
Choosing ringers
Your Kyocera Prisma phone has several preset
ringers you can choose to use for incoming calls.
Your phone is set to make sounds when you
receive calls, press keys, navigate through menus,
and receive alerts (such as new messages).
1. Select Menu → Settings → Sounds →
You can silence all sounds and set the phone to
vibrate or light up when you receive calls and alerts.
Ringer Type.
2. Scroll down the list to hear the different rings.
3. Press
to select a ringer from the list.
Setting the phone to vibrate or light up
1. Select Menu → Settings → Silent Mode.
Assigning business and
personal ringers
2. Choose an option and press
:
–
Vibrate Only—Causes the phone to vibrate
for the duration of the incoming call or
other alert. appears.
You can assign ringers to contacts classified as
business or personal in your Contacts directory.
Note: To classify a contact as Business or
Personal, see page 12.
–
Vibrate, Ring—Causes the phone to
vibrate for the first 10 seconds and then
ring for the remainder of the incoming
1. Select Menu → Settings → Sounds.
2. Ηighlight Business Ring or Personal Ring and
call alert.
appears.
press
.
–
–
Lights Only—Causes the phone to light up
for the duration of the incoming call or
3. Select a ringer and press
.
other alert.
appears.
Smart Sound
Norm. Sounds—Causes the phone to ring
for the incoming call or alert (in effect,
returns phone to a non-silent mode).
This setting automatically adjusts the volume
during a call, based on surrounding noise levels.
1. Select Menu → Settings → Sounds →
Smart Sound.
3. Press
to return to the home screen.
Note: The phone will ring when it is attached to
an external power source (such as a charger),
even if all sounds have been silenced.
2. Highlight Disabled or Enabled and press
.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Adjusting key tone volume
Adjusting volume
You can adjust the earpiece, speakerphone, and
ringer volume as well as key tones.
You can change the volume of the tones the phone
makes when you press the keys.
1. Select Menu → Settings → Sounds →
Adjusting the earpiece volume
Key Volume.
To adjust the earpiece volume manually during a
2. Press
right to increase the volume, or left
to save.
call, press
up or down.
to decrease the volume.
To set the earpiece volume:
3. Press
1. Select Menu → Settings → Sounds →
Setting key length
Earpiece Volume.
You can change duration of the tones the phone
makes when you press the keys.
2. Press
right to increase the volume, or left
to save.
to decrease the volume.
1. Select Menu → Settings → Sounds →
3. Press
Key Length.
Adjusting the ringer volume
2. Choose Normal or Long.
1. Select Menu → Settings → Sounds →
3. Press
to save.
Ringer Volume.
2. Press
right to increase the volume, or left
to save.
Setting message alerts
You can choose how you want be alerted of
incoming voicemail, pages, or text messages.
to decrease the volume.
3. Press
1. Select Menu → Settings → Msg Settings →
Adjusting speakerphone volume
Alerts.
1. Select Menu → Settings → Sounds →
2. Select the type of alert: Message Alert, Page
Spkrphone Vol.
Alert, or Voicemail Alert.
2. Press
right to increase the volume, or left
to save.
3. Press
to select an option:
to decrease the volume.
–
Vibrate, Beep, HiYa!, Rock!, Happy!, sets
the phone to alert you once when a new
message is received.
3. Press
26
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
Vibe, remind; Beep, remind; HiYa! remind;
Rock! remind; HappyRemind sets the
phone to notify you once when a new
message is received and then notify you
again every five minutes. To stop a
Creating a shortcut to frequent
contacts
By default, your phone lists your entire contacts
list when you select Contacts. You can also set the
phone to show a list of your most frequent
contacts.
reminder alert, press
to select Ignore.
Disabled—Turn off message alerts.
1. Select Menu → Settings → Convenience →
Frequent List.
Using shortcuts
From the home screen, you can access shortcuts
by pressing
2. Select Enabled to include the list or Disabled
to remove it.
in four different directions.
Using the Frequent Contacts shortcut
Three shortcuts are automatically programmed
into your phone (down, left, and right).
•
From the home screen, press
down.
Your 15 most frequently called contacts
appear at the top of the list, followed by your
complete Contact list.
•
•
•
Down lists the phone’s Contacts directory.
Left locks the keypad.
Right silences sounds and sets phone to
vibrate.
Choosing a different language
Your phone may display alternative languages.
For the fourth direction (up), you can set a
shortcut to one of the features of your phone.
1. Select Menu → Settings → Display →
Language.
Defining the feature shortcut (up)
2. Select a language, and press
.
1. Select Menu → Settings → Convenience →
Shortcut Key.
Personalizing the screen
2. Highlight the feature you want a shortcut to,
and press
to select it.
Changing your banner
Using the up feature shortcut
The banner is the personal label for your phone.
It appears on the home screen above the time and
date. The banner can be up to 14 characters long.
•
From the home screen, press and hold
up.
1. Select Menu → Settings → Display →
My Banner.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
27
2. Press
right and then
to select Edit.
–
5 sec/in call, 10 sec/in call, 30 sec/in call,
1 min/in call—Turn backlighting on for
the duration of a call, and for 5, 10, 30
seconds or 1 minute after your
last keypress.
3. Enter your new text. Press
to clear any
digits.
4. Press
to select Save.
Choosing a menu view
Note: These settings drain the battery more
quickly and reduce talk and standby times.
Two menu views are available:
1. Select Menu → Settings → Display →
Setting power backlighting
Main Menu View, then the option you want:
You can set backlighting to remain on when an
external power source, such as the AC adapter, is
used with the phone.
–
Graphic displays a graphical icon view of
menu items.
–
List displays menu items in text format.
Note: Power backlighting may not be available
with accessories.
2. Press
to return to the home screen. The
next time you select Menu, you will see the
menu view you selected.
1. Select Menu → Settings → Accessories →
Pwr Backlight.
Adjusting the backlighting
2. Select Always On to keep backlighting on.
Your screen lights up while you are in a call or
when you press a key on the keypad. However,
you can set the length of time that bright
backlighting remains on.
Note: The battery charges more slowly when
power backlighting is on.
Changing the display contrast
1. Select Menu → Settings → Display →
1. Select Menu → Settings → Display →
Contrast.
Backlighting.
2. Press
left or right to adjust the contrast.
2. Select an option from the list:
3. Press
to select Save.
–
5 seconds, 10 seconds, 30 seconds,
1 minute —Turn backlighting on for 5,
10, 30 seconds or 1 minute after your
last keypress.
Setting numbers to auto-hyphenate
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan.
For example, 1-222-333-4444.
28
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Select Menu → Settings → Display →
Auto-Hyphen → Enabled.
3. Highlight a color theme from the list and
press
.
4. Press
to return to the home screen.
Selecting a screen saver
Choosing a different time/date format
Screen savers appear on the home screen and are
activated 10 seconds after the last keypress.
Incoming calls and alerts override screen savers.
1. Select Menu → Settings → Display →
Time Format.
1. Select Menu → Settings → Display →
Screen Saver.
2. Highlight the option you want.
3. Press
to save the setting.
2. Highlight a screen saver and press
.
3. Press to return to the home screen and
Creating a secure environment
wait 10 seconds to view the screen saver you
chose.
This section describes all the features involved in
securing your phone and preventing access to
personal information. All security features are
shielded by a four-digit lock code.
Selecting wallpaper
Wallpaper appears on the home screen.
Changing your lock code
1. Select Menu → Settings → Display →
Wallpaper.
The lock code is typically 0000 or the last 4 digits
of your phone number.
2. Highlight a wallpaper design and press
.
The image appears.
1. Select Menu → Settings → Security.
3. Select Assign to save your selection.
2. Enter your four-digit lock code.
4. Press
to return to the home screen.
3. Select Lock Code. A message appears:
“Change Code?”
Selecting a color theme
4. Press
digit code.
5. Enter your new lock code again.
to select Yes and enter a new four-
You can select a color theme for the display
background of your phone.
1. Select Menu → Settings → Display →
Color Themes.
2. Scroll through the options to view the
color themes.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
29
–
–
Limit Out [going] calls only. Incoming
calls can still be received and answered.
Locking your phone
When your phone is locked, you can call only
emergency numbers or your service provider
number. You can still receive incoming calls.
Limit All calls, both incoming and
outgoing.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Lock Phone.
Designating emergency numbers
The emergency numbers feature allows you to
specify three personal phone numbers that can be
called when the phone is locked.
4. Highlight an option:
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Emergency #’s.
–
–
Never does not lock the phone.
On power up locks the phone every time
you turn it on.
–
Now locks the phone immediately.
4. Select an Unassigned slot.
5. Press
.
Note: Enter the phone number, including the
area code. Do not enter 1 before the area
code.
Unlocking the phone
1. From the home screen, press
to
5. Press
Notes:
to select Done.
select Unlock.
2. Enter your four-digit lock code.
•
You can view these numbers only when they’re
being entered for the first time.
Restricting calls
•
•
You cannot edit these numbers.
You can restrict the calls that can be made from
your phone to emergency numbers, your
contacts, and service provider numbers.
To make a call to an emergency number from
a locked phone, you must dial the number
(including area code) exactly as it was stored
in Emergency Numbers.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Limit Calls.
Erasing all contacts
4. Choose an option:
You can erase all entries from your Contacts
directory.
–
No Limit limits no calls.
1. Select Menu → Settings → Security.
30
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Enter your four-digit lock code.
1. Connect the TTY device to the phone.
3. Select Erase Contacts.
2. Enter
from
your keypad.
4. Select Yes. A message appears: “Erase ALL
contacts?”
3. Press
4. Press
5. Press
6. Press
to select the TTY option.
to clear the message.
5. Select Yes and press
to erase all
contacts.
down to highlight an option.
.
Network settings
Note: TTY/TDD service may not be available.
Check with your service provider for more
information.
Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
Ensuring Call Privacy
You can set your phone to sound an alert if
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
enhanced CDMA voice privacy is lost or regained
(check with your service provider to see if CDMA
voice privacy is enabled in your area). When voice
privacy is activated during a call, you will see a
message and
on your screen.
Note: You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection:
To set this alert:
•
Select Menu → Settings → Network →
Privacy Alert → Enabled.
1. Select Menu → Settings → Network →
Set Phone Line.
2. Select one of the two lines and press
.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired. Note: Enable TTY only when
using the phone with a TTY device.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
31
7
FUN & GAMES
The games in this section may not be available on
your phone. Check with your service provider for
availability.
Race 21
This game is a timed variation of Black Jack. Each
game comprises three 90-second rounds. To
score points, add cards in each of the four
columns, trying to reach but not exceed 21 in
each column during the course of the game.
If you receive an incoming call alert while you are
playing Brick Attack™ or Race 21™, the game is
paused and exited. You can return to play once
the call alert ends. Games do not remain paused if
the phone is turned off or loses power.
1. Select Menu → Fun & Games → Race 21.
2. Press
at the splash screen.
3. Select New Game. The first card to be placed
is shown at the top left of the screen. Press a
key to add a card to the row as follows:
Brick Attack
The goal of this game is to eliminate bricks
arranged in levels. You send a moving ball
upward using a paddle at the bottom of
the screen.
Add cards to the first row
Add cards to the second row
1. Select Menu → Fun & Games → Brick Attack.
Add cards to the third row
Add cards to the fourth row
2. Press
to select New.
–
–
–
To pause the game, press
, then press
left or
to Resume.
Shortcut: Press
left or right to choose
To move the paddle, press
right.
arrows at the bottom of the screen. Then press
to add cards to corresponding rows.
Note: Each time you place a card, a new card
appears for placement.
To exit the game, highlight Exit and press
.
4. Continue placing cards until you are satisfied
with your selections.
–
You can pause by pressing
up, or end
the game at any time by pressing
.
32
Fun & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
You lose points each time you exceed 21
in a column.
My Sounds
The My Sounds menu stores the sounds that you
receive from text messages.
Select
to skip one card per round.
to select to get your score and
advance to the next round.
6. Select an option and press
5. Press
To access stored sounds:
1. Select Menu → Fun & Games → My Sounds.
to select it.
New Game—Initiates game play. To pause
the game, press . From here you can
2. Press
the sounds.
3. Highlight an option and press
up or down to scroll through
–
to select it:
Play allows you to listen to the sound.
choose Resume, New or Quit.
–
–
–
–
–
–
Resume Game—Returns you to the game
you were last playing.
Send opens a new message entry screen.
Assign allows you to use the sound as a
Scoreboard—Provides you with the top
five scores.
ringer on your phone.
–
Delete erases the sound from your
Music—Choose when you hear music
with this game. Select from Music Always,
During Title, or No Music.
My Sounds list and from the Ringer menu.
Saving memory
–
–
–
Sound Effects—Choose to Enable or
Disable sound effects.
It is a good idea to erase old sounds as they take
up memory in your phone. To erase a sound,
select it and then select Delete.
Instructions—Press
up or down to
scroll faster or go back to review.
Refer to “My Sounds” .
Credits—Press
up or down to scroll
faster or go back to review..
7. Press
to end all games.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
33
8
TOOLS
Scheduler
The Scheduler allows you to schedule events and
set reminder alerts.
Alarm Clock
Use the Alarm Clock to set an alert for a specific
time. The alert occurs only if the phone is on.
1. Select Menu → Tools → Alarm Clock.
Creating an event
2. Select Set.
1. Select Menu → Tools → Scheduler.
–
–
–
Press
and minutes.
up or down to select an hour
2. Press
down to select Add Event and
press
.
Press
left or right to switch between
3. Enter a name for the event. For help entering
hours, minutes, and a.m./p.m.
text, see page 15.
Use the phone keypad to enter numbers.
4. Select Next.
3. Press
to select Done and save the setting.
5. Enter the time, length, and alarm for the event.
4. When the alarm rings, select Off to turn off the
alarm or Snooze to silence the alarm for
10 minutes.
–
Press
up or down to select date,
hour, minutes, and timing of alarm.
–
Press
left or right to move between
fields.
Tip Calculator
The Tip Calculator helps you calculate how much
tip to include on a bill.
6. Select Next, enter a note if required.
7. Select Next.
Viewing, editing, or erasing an event
1. Select Menu → Tools → Tip Calc.
2. Enter the amount of your bill.
3. Select Next.
1. Select Menu → Tools → Scheduler.
2. Select View Day or View Month to find the
event you want to view, edit, or erase.
4. Select the amount you want to include as a tip
(10%, 15%, 18%, 20%, Other) and press
. Your total bill appears, including tip.
3. Press
an event and press
4. Select Edit or Erase. Follow the prompts.
up, down, left, or right to highlight
to select it.
5. To split the bill, select Split and press
.
5. Press
to return to the home screen.
34
Tools
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Enter the number of guests and press
select Next. The amount each guest pays is
calculated.
to
World Clock
World Clock may not be available on your phone.
Check with your service provider for availability.
7. Select Done.
The World Clock lets you check times in cities
around the world in relation to local time.
Calculator
Use the calculator for basic mathematical
equations.
1. Select Menu → Tools → World Clock.
Your local time and date is on the first line,
followed by your selected world city and that
city’s time and date.
1. Select Menu → Tools → Calculator.
2. Use the keypad to enter numbers.
When you first access World Clock, you are
prompted to select a city.
3. Use
to navigate left and right to select
mathematical operations.
2. Press
to select Cities. The Cities menu is
4. Press
to calculate the result.
displayed, showing 85 world cities in
alphabetical order.
Example: Enter 5, press
right to select X,
press
, enter 2, and then press to
3. Press
up or down to scroll through the
cities. You can also use the number keys
(2-9) to alphabetically tab through the list.
obtain the result of 10.
5. Press
to clear the screen.
4. Press
to select a city, like Athens. The
World Clock menu is displayed again, with
Athens’ time and date.
6. Press
to return to the home screen.
Options
Changes the number to positive or
negative.
From the World Clock menu, you can also select
Search to search by city or country.
C
.
Clears the last entry
1. Select Search from the World Clock menu.
The Search By menu is displayed.
2. Select your type of search.
Inserts a decimal point.
Adds displayed digit to the value stored
in memory.
M+
–
–
Press
Press
to search by City.
Displays currently stored value on
screen.
MR
MC
down, then press
to
search by Country.
Clears value currently stored in memory.
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
35
3. If you search by City, the Find City screen
3. Press
minutes, and seconds. To move the cursor,
press left or right.
up or down to set the hours,
is displayed.
a. Use your number keys (2-9) to enter the
letter(s) by which you want to search. For
4. Select Start and begin the countdown.
Select Stop to pause the countdown.
Select Reset to clear the timer.
example, press
once to enter the
letter A.
b. Press Search.
5. Press
to silence the alarm.
c. Cities beginning with A are displayed, like
Stopwatch
Anchorage, Athens, and Atlanta.
1. Select Menu → Tools → Stopwatch.
2. Select Start to begin counting.
3. Select Stop to stop counting.
d. Use
press
to move through the list, then
to select a city.
4. If you search by Country, the Find Country
screen is displayed.
4. Select Reset to clear the counter.
a. Use your number keys (2-9) to enter the
5. Press
to return to the home screen.
letter(s) by which you want to search. For
example, press
once to enter the
letter A.
b. Press Search.
c. Countries beginning with A are displayed,
like Afghanistan, Algeria, and Australia.
5. Use
to move through the list, then press
to select a country.
Timer
This timer counts down for a specified amount of
time. It beeps when that amount of time has
elapsed.
1. Select Menu → Tools → Timer.
2. Select Set.
36
Tools
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Numerics
1-touch dialing, 9
E
limiting calls out, 30
lock code, 29
locking
emergency
calls, 10
A
emergency mode, 10
keypad, 10
phone, 29
alarm clock, 2, 34
alerts
for messages, 26
for missed calls, 7
assigning business and personal
ringers, 25
exit emergency mode, 10
erasing
M
contact entries, 30
text messages, 21
memory, saving, 21
menu view, 28
My Sounds, 33
F
auto-hyphenation, 28
AutoText, 22
fast find, 14
finding contact information, 13
frequent contacts, 13
N
number mode, 15
B
O
banner, 27
battery, 1
blocking outgoing calls, 30
Brick Attack, 32
G
games
outbox, 19
P
Brick Attack, 32
My Sounds, 33
Race 21, 32
phone numbers
editing, 13
verifying your own, 5
phone, unlocking, 29
prepend, 13
C
calculator, 35
call counters, 10
calls
H
hands-free car kit
purchasing, iv
hands-free headset
purchasing, iv
hard pause, 12
R
answering, 6
Race 21, 32
recent call icons, 7
resetting the phone, iv
ringers
missed, 7
redialing, 6
color themes, 29
contacts directory, 12
contrast, 28
I
icons, 2
inbox, 21
choosing types, 25
for roaming calls, 11
silencing, 5
countdown timer, 36
customer support, v
K
keyguard, 2, 10
keypad, locking, 10
volume, 26
D
roaming, 2
digital mode, 2
display contrast, 28
alerts, 11
controlling, 11
ringer, 11
L
language, 27
lights-only mode, 2, 25
User Guide for the Kyocera Prisma Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
37
S
U
saved phone numbers
editing, 13
unlocking the phone, 30
V
scheduler, 34
screen contrast, 28
screen icons, 2, 15, 20, 25
screen savers, 28
secret contacts, 8
security, 29
vibrate, 2, 25
voicemail, 9
setting up, 5
volume
earpiece, 7, 26
key beep, 26
ringer, 26
shortcuts, 27
setting, 27
using, 27
W
wallpaper, 29
world clock, 35
silent mode, 2, 25
sound files, 33
speakerphone
turning off, 7
turning on, 7
stopwatch, 36
symbol mode, 16
T
text entry, 15
quick reference, 16
text messages, 18
time format, 29
timer, 36
timing calls, 10
tip calculator, 34
Tools
alarm clock, 34
calculator, 35
scheduler, 34
stopwatch, 36
timer, 36
tip calculator, 34
world clock, 35
TTY/TDD, 31
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|