|
User’s Guide
KODAK DP900 / DP1100 Digital Projectors
PN 009-0405-00
3/99
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety Terms: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Unpacking the Projector. . . . . . . . . . . . . . . . . . . . . . 3
Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Front of Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Rear and Side of Projector . . . . . . . . . . . . . . . . . . . . . . . . . .4
Connector Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Connecting the Projector. . . . . . . . . . . . . . . . . . . . . 5
Connecting to a Laptop Computer . . . . . . . . . . . . . . . . . . . .6
Connecting to a Desktop Computer . . . . . . . . . . . . . . . . . . .7
Connecting to a Video Player . . . . . . . . . . . . . . . . . . . . . . . .9
Starting the Projector . . . . . . . . . . . . . . . . . . . . . . . 11
Using the Remote Control . . . . . . . . . . . . . . . . . . . 14
Using the Keypad. . . . . . . . . . . . . . . . . . . . . . . . . . 15
Turning Off the Projector . . . . . . . . . . . . . . . . . . . . 17
For More Information . . . . . . . . . . . . . . . . . . . . . . . 18
3/99
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide
KODAK DP900 / DP1100 Digital Projectors
This guide contains the setup and operating procedures for your
KODAK DP900 or DP1100 Digital Projector. For more
information on how to connect, operate and maintain your
projector, refer to your Reference Manual.
Safety Instructions
Please read and follow all safety instructions provided before
using your new projector. Failure to comply with safety
instructions may result in fire, electrical shock, or personal injury
and may damage or impair protection provided by equipment.
Please save all safety instructions.
Safety Definitions
•
Warning: Statements identify conditions or practices
that could result in permanent personal injury.
Caution: Statements identify conditions or practices that
could result in damage to your equipment.
•
Safety Symbols
Attention: For information about use of a feature, please
refer to the Reference Manual.
Warning: Hot surface. Do not touch.
An arrow pointing to the lamp door on the projector.
3/99
1
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide KODAK DP900 / DP1100
Safety Terms:
•
Warning: Don’t look directly into the lens when the
projector is turned on.
•
Warning: Don’t block ventilation openings.
•Warning: To replace the lamp, turn the power off
and unplug the power cord. To avoid burns, wait 30
minutes before opening the lamp door. Follow all
instructions provided in the Reference Manual.
Connect the power cord to a receptacle with a
protective safety (earth) ground terminal.
•
Warning: Refer all service to qualified service personnel.
Servicing your own projector will void the warranty. See “For
More Information” on page 18 for the customer service
contact information.
•
•
•
•
Caution: Don’t set liquids on the projector. Spilled liquids
may damage your projector.
Caution: Don’t place the projector on a hot surface or in
direct sunlight.
Caution: Do not drop the projector. Transport the projector
in a Kodak-approved case.
Caution: For ceiling mount installations, please use the
ceiling mount recommended in the Reference Guide and
follow all instructions provided with it.
•
Caution: The projector lamp bulb is pressurized and may
rupture after more than 1,000 hours use. Always change the
bulb as soon as you notice a decrease in the brightness.
2
3/99
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking the Projector
Unpacking the Projector
The projector comes with the items shown here. If any items are
missing, call your dealer immediately.
2
1
4
5
3
6
7
8
9
11
10
Digital projector and lens cap
Soft carry case
RCA audio/video cable
Cable hub connector
Audio cable
1.
2.
3.
4.
5.
6.
7.
Remote control
8.
Power cord
PS/2 mouse cable
USB mouse cable
MAC adapter
9.
DP900 / DP1100 User’s Guide,
Reference Manual, and
Online User Guide CD
10.
11.
Note: Optional accessories are not shown.
3/99
3
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide KODAK DP900 / DP1100
Projector Features
Front of Projector
focus ring
elevator button
zoom ring
Rear and Side of Projector
keypad
front of projector
connector panel
elevator button
power
cord
connector
speaker
power switch
Connector Panel
computer
audio in
s-video
cable
hub connector
composite
connector
L/R audio in
(for video source)
4
3/99
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Projector
Connecting the Projector
You can connect your projector to a laptop computer, desktop
computer, or video player. All connections are made with the aid
of icons on the cables. The cables with their icons are shown here.
Caution: Make sure your projector, computer and video
player are turned off before you connect them.
Cable hub connector
To your
To your
computer
projector
Mouse
Audio
Monitor
Audio cable
To the audio
connection on
the cable hub
To the audio
connection on
your computer
PS/2 mouse cable
To the mouse
To the PS/2 mouse
port on your
connection on the
cable hub
computer
USB mouse cable
To the mouse
connection on the
cable hub
To the USB
port on your
computer
3/99
5
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide KODAK DP900 / DP1100
Connecting to a Laptop Computer
audio cable
cable hub connector
mouse cable
1. Connect the
end of the cable hub connector to the
connector on the projector’s connector panel.
2. Plug the end of the cable hub connector into the video
connector on your laptop.
3. Plug either end of the audio cable into the audio connector on
your computer; plug the other end of the audio cable into the
connector on the cable hub.
4. Plug the
connector on your computer; plug the
mouse cable into the connector on the cable hub.
Or if you have a USB connection:
end of the PS/2 mouse cable into the mouse
end of the PS/2
mouse connector on your computer; plug the
USB mouse cable into the connector on the cable hub.
end of the USB mouse cable into the USB
end of the
To start using your projector, go to “Starting the Projector” on
page 11.
6
3/99
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Projector
Connecting to a Desktop Computer
audio cable
hub connector
mouse cable
monitor cable
1. Connect the
end of the cable hub connector to the
connector on the projector’s connector panel.
2. Locate the cable that connects your monitor to your computer
and unplug it from the computer.
3. Plug your monitor cable into the
hub.
connector on the cable
4. Plug the
end of the cable hub into the monitor connector
on your computer.
5. Unplug the audio cable, if present, from your computer and
plug either end of the audio cable into the audio connector on
your computer. Plug the other end of the audio cable into the
connector on the cable hub.
3/99
7
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide KODAK DP900 / DP1100
6. Unplug the mouse cable from your computer and plug the
end of the PS/2 mouse cable into the mouse connector on your
computer. Then plug the end of the PS/2 mouse cable into
the connector on the cable hub.
Or if you have a USB connection:
end of the USB mouse cable into the USB
mouse connector on your computer and plug the
end of
the USB mouse cable into the
connector on the cable hub.
To start using your projector, go to “Starting the Projector” on
page 11.
8
3/99
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Projector
Connecting to a Video Player
If your video player uses a round, one-prong composite video
connector, you need only the A/V cable that was shipped with the
projector. If your video player uses a round, four-prong S-video
connector, you need an S-video cable in addition to the
A/V cable.
Note: The S-video cable is sold separately. To order the cable,
refer to the Reference Manual.
Connecting with an AV Cable
audio/video cable
1. Plug the A/V cable’s yellow connector into the “video-out”
port on your video player. This port may be labeled “To
Monitor.”
2. Plug the other yellow connector into the composite connector
on the back of the projector.
3. Plug the A/V cable’s white connector into the left “audio out”
port on your video player. Plug the cable’s red connector into
the right “audio out” port on the video player.
4. Plug the A/V cable’s other white and red connectors to the left
and right “audio in” ports on the projector.
To start using your projector, go to “Starting the Projector” on
page 11.
3/99
9
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide KODAK DP900 / DP1100
Connecting with an S-video Cable
S-video cable
A/V cable
1. Connect the S-video cable to the “s-video out” connector on
the video player.
2. Plug the other end of the cable into the “s-video” connector on
the projector.
player and to the projector.
The yellow connectors on the A/V cable are not connected to
anything when used with the S-video cable.
To start using your projector, go to “Starting the Projector” on
page 11.
10
3/99
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the Projector
Starting the Projector
1. Remove the lens cap.
2. Plug the power cord into the side of the projector, then plug it
into your electrical outlet.
Power switch
Power cord connection
3. Press the “I” side of the power switch to turn on the projector.
The Kodak start-up screen appears and the power LED on top
of the projector lights up.
4. Turn on your video source - a video player or a computer.
The video image appears on the projection screen.
3/99
11
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide KODAK DP900 / DP1100
5. Position the projector and adjust the zoom setting for the
image size you want.
DP900
20 ft.
6 m
12 ft.
3.7 m
5 ft.
1.5 m
DP1100
20 ft.
6 m
12 ft.
3.7 m
5 ft.
1.5 m
12
3/99
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the Projector
6. Make basic image adjustments. (Refer to the Reference
Manual for advanced image adjustments.)
•
•
•
•
Adjust the zoom ring
Focus by rotating focus lens.
Be sure the projector is at a 90-degree angle to the screen.
Adjust the height of the projector. Press and hold the
elevator button. Raise the projector to the height you
want, then release the button.
elevator button
3/99
13
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide KODAK DP900 / DP1100
Using the Remote Control
Point the remote control at the projection screen or at the front or
rear of the projector. For best results, point the remote directly at
the projector. The range for optimum operation is about
40 feet (12 m).
The remote has four function buttons, a disk mouse and two
mouse buttons, one on the top of the remote and one on the
bottom.
disk mouse
standby
simulates the right mouse button
computer
menu
video
simulates the left mouse button
14
3/99
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Keypad
Using the Keypad
The keypad is lit green while the menus are displayed and is lit
orange when the projector is on. While the menus are displayed,
the volume, source, and standby buttons act as navigation buttons.
menu button - displays a menu of
projector options on the screen
source button - toggles
back and forth
between video and
computer sources
volume -
volume -
increases volume
decreases volume
standby - turns off the image without
turning off the projector
simulates left and right mouse buttons
3/99
15
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide KODAK DP900 / DP1100
To view the on-screen menus, press the
button on the
keypad or remote. The menu bar appears and the volume, source,
and standby buttons become navigation buttons. To select a menu,
use the keypad or the remote control to move the cursor left and
right to highlight the menu you want. The drop-down menu
appears.
To change a menu setting, use the up and down navigation
buttons on the keypad or the disk mouse on the remote to move
the cursor to the desired item. The selected item is highlighted.
Then use the left and right mouse buttons at the bottom of the
keypad or the mouse buttons on the remote control to adjust a
setting. Changes are saved when you close the menus.
To access another menu, use the left and right navigation buttons
on the keypad or the disk mouse on the remote control to move
left or right to another menu.
16
3/99
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning Off the Projector
Turning Off the Projector
To turn off the projector for a short period of time, press the
button on the keypad or remote control. This blanks the screen for
a preset amount of time but keeps the projector running. After the
set amount of time elapses again, the lamp turns off. To exit
standby mode, press the
button again.
To completely turn off the projector, press the “0” side of the
power switch on the side of the projector. If you want to turn the
projector back on immediately, allow about a minute for the lamp
to cool. The lamp will not light if it is too hot.
Always unplug the projector from the wall outlet before
unplugging the cord at the projector.
3/99
17
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide KODAK DP900 / DP1100
For More Information
The first place to look for help is in the Reference Manual. Be
sure to check the guidelines in “Troubleshooting.”
Online Services
Contact Kodak via:
World Wide Web
(click on Service and Support)
America Online
CompuServe
(keyword) KODAK
GO KODAK
ftp.kodak.com
Faxed Information
Kodak offers automated support by fax:
U.S. and Canada
Europe
1-800-295-5531
44-131-458-6962
U.K.
44-0-131-458-6962
18
3/99
Download from Www.Somanuals.com. All Manuals Search And Download.
For More Information
Customer Support
If you have questions concerning the operation of your KODAK
projector, you can speak directly to a customer support
representative. Have the projector serial number ready, and be at
your computer with your projector when you call.
In the U.S. and Canada call toll free, 1-888-375-6325, between
the hours of 9:00 a.m. and 8:00 p.m. (Eastern Standard Time)
Monday through Friday.
In Europe call
Austria/Osterreich
Germany/Deutschland
Spain/Espana
01 795 67000
069 9509 6055
91 4069130
02 713 1398
01 402 6815
08 587 70305
38 48 7088
Belgium/Belgique
Ireland/Eire
Sweden/Sverige
Denmark/Danmark
Italy/Italia
02 696 33205
01 838 5358
Switzerland/Schweiz/
Suisse
Finland/Soumi
Netherlands/Nederland
UK (National Line)
France
0800 11 8043
020 346 9128
0870 6061031
0141 918578
Norway/Norge
1 Int. Fax Line
23 16 2041
+44 (0) 870 6061032
3/99
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Eastman Kodak Company
343 State Street
Rochester, New York 14650
Kodak is a trademark of
Eastman Kodak Company.
PN 009-0405-00
3/99
©Eastman Kodak Company
Printed in the U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|