CommerCial mixer
instruCtions
Batteur sur soCle CommerCial
instruCtions
Batidora Con Base ComerCial
instruCCiones
1-855-845-9684
Details inside
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
2 Year Hassle Free Warranty................................................................................ Inside Front Cover
Proof of Purchase & Product Registration Card................................................... Inside Front Cover
Stand Mixer Safety............................................................................................................................ 4
Warranty........................................................................................................................................... 5
For the 50 United States, District of Columbia, and Puerto Rico........................................... 5
Arranging for Service After the Warranty Expires................................................................... 6
Arranging for Service Outside the 50 United States and Puerto Rico..................................... 6
Ordering Accessories and Replacement Parts......................................................................... 6
Electrical Requirements.................................................................................................................... 7
Troubleshooting Problems................................................................................................................ 7
Stand Mixer Features........................................................................................................................ 8
Assembling Your Bowl Lift Stand Mixer ........................................................................................... 9
Using Your KitchenAid® Attachments ............................................................................................ 10
Mixing Time.................................................................................................................................... 10
Mixer Use....................................................................................................................................... 10
Speed Control Guide - 10 Speed Stand Mixers.............................................................................. 11
Beater To Bowl Clearance.............................................................................................................. 12
Mixing Tips ..................................................................................................................................... 13
Basic White Bread .......................................................................................................................... 14
Care And Cleaning ......................................................................................................................... 15
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Stand Mixer Safety
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put Stand Mixer in water or other
liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug Stand Mixer from outlet when not in use, before putting on or taking off
parts and before cleaning.
5. Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas and
other utensils away from beater during operation to reduce the risk of injury to
persons and/or damage to the Stand Mixer.
6. Do not operate Stand Mixer with a damaged cord or plug or after the Stand Mixer
malfunctions, or is dropped or damaged in any manner. Call the KitchenAid®
Customer Satisfaction Center at 1-855-845-9684 for more information.
7. The use of attachments not recommended or sold by KitchenAid® may cause fire,
electrical shock or injury.
8. Do not use the Stand Mixer outdoors.
9. Do not let the cord hang over edge of table or counter.
10. Remove flat beater, wire whip or dough hook from Stand Mixer before washing.
SAVE THESE INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
4
KitchenAid® Stand Mixer Warranty for
the 50 United States, District of Columbia,
and Puerto Rico
This warranty extends to the purchaser and any succeeding owner for Stand Mixers
operated in the 50 United States, District of Columbia, and Puerto Rico.
Length of
Warranty:
KitchenAid Will Pay
For Your Choice of:
KitchenAid Will Not
Pay For:
Two Year Full Warranty from
date of purchase.
A.Damage resulting
from accident,
alteration, misuse
or abuse.
B. Replacement parts
or repair labor costs
for Stand Mixers
operated outside the
50 United States,
District of Columbia,
and Puerto Rico.
Hassle-Free Replacement
of your stand mixer. See
inside front cover for
details on how to arrange
for service, or call the
Customer Satisfaction
Center toll-free at
1-855-845-9684.
OR
The replacement parts
and repair labor costs
to correct defects
in materials and
workmanship.
KITCHENAID DOES NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so this exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which
vary from state to state.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Arranging for Service
After the Warranty Expires
For service information, call toll-free
1-855-845-9684 or write to:
Customer Satisfaction Center,
KitchenAid Portable Appliances,
P.O. Box 218, St. Joseph, MI 49085-0218.
Arranging for Service Outside
the 50 United States and Puerto Rico
Consult your local KitchenAid® dealer or
the store where you purchased the stand
mixer for information on how to obtain
service.
Ordering Accessories and Replacement Parts
To order accessories or replacement
parts for your Stand Mixer, call toll-free
1-855-845-9684 or write to:
Customer Satisfaction Center,
KitchenAid Portable Appliances,
P.O. Box 218, St. Joseph, MI 49085-0218.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Electrical Requirements
Volts: 120 A.C. only. Hertz: 60
The power rating for your Stand Mixer is
printed on the trim brand or on the serial
plate.
WARNING
Model KSM7990 Only:
Volts
Horsepower
Hertz
120
1.3
60
Electrical Shock Hazard
Do not use an extension cord. If the
power supply cord is too short, have
a qualified electrician or serviceman
install an outlet near the appliance.
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
Troubleshooting Problems
Please read the following before
If your Stand Mixer should
malfunction or fail to operate,
please check the following:
- Is the Stand Mixer plugged in?
- Is the fuse in the circuit to the Stand
Mixer in working order? If you have a
circuit breaker box, be sure the circuit
is closed.
- Turn the Stand Mixer off for 10-15
seconds, then turn it back on. If the
mixer still does not start, allow it to
cool for 30 minutes before turning it
back on.
calling your service center.
1. The Stand Mixer may warm up during
use. Under heavy loads with extended
mixing time periods, you may not be
able to comfortably touch the top of
the Stand Mixer. This is normal.
2. The Stand Mixer may emit a pungent
odor, especially when new. This is
common with electric motors.
3. If the flat beater hits the bowl, stop
the Stand Mixer. See “Beater to
Bowl Clearance”.
If the problem is not due to one of the
above items, see the KitchenAid®
Warranty. Do not return the Stand Mixer
to the retailer, as they do not provide
service.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Stand Mixer Features
Motor Head
Speed Control
Lever
Beater Height
Adjustment Screw
Bowl Lift Lever
(Not Shown)
Spring Latch
and Bowl Pin
(Not Shown)
Beater Shaft
Bowl Support
Locating Pins
7 Quart Stainless
Steel Bowl
Bowl handle (style may
vary depending on model)
Stainless Steel
Flat Beater
Stainless Steel
Spiral Dough Hook
11-Wire Stainless Steel
Elliptical Whip
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Assembling Your Bowl Lift Stand Mixer
To Lower Bowl
1. Rotate lever back and down.
WARNING
To Attach Flat Beater, Wire Whip,
or Dough Hook
1. Turn speed control to OFF.
2. Unplug Stand Mixer or disconnect
power.
3. Slip flat beater
on beater shaft
and press upward
Electrical Shock Hazard
as far as possible.
Plug into a grounded 3 prong
outlet.
4. Turn beater to right, hooking beater
over the pin on shaft.
5. Plug into a grounded 3 prong outlet
or reconnect power.
Do not remove ground prong.
Do not use an adapter.
To Remove Flat Beater, Wire Whip,
or Dough Hook
Do not use an extension cord.
1. Turn speed control to OFF.
2. Unplug Stand Mixer or disconnect
power.
3. Press beater upward as far as
possible and turn left.
4. Pull beater from beater shaft.
5. Plug into a grounded 3 prong outlet
or reconnect power.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
To Attach Bowl
1. Turn speed control to OFF.
2. Unplug Stand Mixer or disconnect power.
3. Place bowl lift lever in down position.
4. Fit bowl supports over locating pins.
5. Press down on back of bowl until
bowl pin snaps into spring latch.
6. Raise bowl before mixing.
Commercial Stand Mixer SPEED
Control and Lever Guard
7. Plug into a grounded 3 prong outlet
or reconnect power.
The Soft Start™ feature minimizes
splash-out by starting the mixer slowly
before increasing to the selected
speed. To further reduce the potential
for splash-out, always begin mixing
using the STIR speed, then gradually
move to higher speeds as needed. See
“Speed Control Guide”.
To Remove Bowl
1. Turn speed control to OFF.
2. Unplug Stand Mixer or disconnect
power.
3. Place bowl lift lever in down position
4. Remove flat beater, wire whip, or
dough hook.
5. Grasp bowl handle and lift straight
up and off locating pins.
Auto-Reset Motor Protection
If the Stand Mixer stops due to overload,
slide the speed control lever to OFF.
After a few minutes, the stand mixer
will automatically reset. Slide the Speed
Control Lever to the desired speed
and continue mixing. If the Stand Mixer
does not restart, see “Troubleshooting
Problems”.
To Raise Bowl
1. Rotate lever to straight-up position.
2. Bowl must always be in raised, locked
position when mixing.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Using Your KitchenAid® Attachments
Flat Beater for normal to heavy mixtures:
cakes
creamed frostings
candies
cookies
pie pastry
biscuits
quick breads
meat loaf
mashed potatoes
Wire Whip for mixtures that need air incorporated:
eggs
sponge cakes
angel food cakes
mayonnaise
egg whites
heavy cream
boiled frostings
some candies
Dough Hook for mixing and kneading yeast doughs:
breads
rolls
coffee cakes
buns
Mixing Time
Your KitchenAid® Stand Mixer will mix
faster and more thoroughly than most
other electric stand mixers. Therefore,
the mixing time in most recipes must
be adjusted to avoid overbeating. With
cakes, for example, beating time may be
half as long as with other stand mixers.
Mixer Use
The Stand Mixer may warm up during
use. Under heavy loads with extended
mixing time, you may not be able to
comfortably touch the top of the Stand
Mixer. This is normal.
If the Stand Mixer becomes overloaded,
it will automatically shut off to prevent
damage. See “Auto-Reset Motor
Protection”.
NOTE: Do not scrape bowl while Stand
Mixer is operating.
The bowl and beater are designed
to provide thorough mixing without
frequent scraping. Scraping the bowl once
or twice during mixing is usually sufficient.
Turn Stand Mixer off before scraping.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Speed Control Guide – 10 Speed Stand Mixers
All speeds feature Soft Start™ operation, which minimizes splash-out and flour puff.
The mixer will start slowly before increasing to the selected speed.
Number of Speed
Speed
Stir
STIR
For slow stirring, combining, mashing,
starting all mixing procedures. Use to add
flour and dry ingredients to batter, and add
liquids to dry ingredients. Do not use STIR
speed to mix or knead yeast doughs.
2
SLOW MIXING
For slow mixing, mashing, faster stirring.
Use to mix and knead yeast doughs, heavy
batters and candies; start mashing potatoes
or other vegetables; cut shortening into
flour; mix thin or splashy batters.
4
MIXING,
BEATING
For mixing semi-heavy batters, such as
cookies. Use to combine sugar and
shortening and to add sugar to egg whites
for meringues. Medium speed for cake
mixes.
6
BEATING,
CREAMING
For medium-fast beating (creaming) or
whipping. Use to finish mixing cake,
doughnut, and other batters. High speed
for cake mixes.
8
FAST BEATING,
WHIPPING
For whipping cream, egg whites, and
boiled frostings.
10
FAST WHIPPING
For whipping small amounts of cream, egg
whites or for final whipping of mashed
potatoes.
NOTE: Use speed 2 to mix or knead yeast dough or fondants. Use of any other speed
with heavy doughs may cause mixer to stop rotating to limit mixer damage. This is
normal operation. If this occurs, turn the speed selector to off, and then turn back on to
a lower speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Beater to Bowl Clearance
Your Stand Mixer is adjusted at the factory so the flat beater just clears the bottom of
the bowl. If, for any reason, the flat beater hits the bottom of the bowl or is too far away
from the bowl, you can correct the clearance easily.
1. Unplug Stand Mixer or disconnect
power.
Raise Bowl
Lower Bowl
2. Place bowl lift lever in down position.
3. Attach flat beater.
4. Adjust so flat beater just clears bottom
surface of bowl when in lifted position
by turning screw (A) counterclockwise
to raise the bowl and clockwise to
lower the bowl. Just a slight turn is all
that is required: the screw will not
rotate more than 1/4 turn (90 degrees)
in either direction. (The full range of
adjustment is 1/2 turn, or 180 degrees.)
A
5. Place bowl lift lever in up position to
check clearance.
6. Repeat steps 4 and 5 if necessary.
NOTE: When properly adjusted, the flat
beater will not strike on the bottom or
side of the bowl. If the flat beater or the
wire whip is so close that it strikes the
bottom of the bowl, the beater or whip
may wear.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Mixing Tips
Using Your Recipes with the Mixer
Adding Ingredients
There are a number of methods that
can be used for making cake with your
KitchenAid® Stand Mixer.
Always add ingredients as close to side of
bowl as possible, not directly into moving
beater.
For example, the “quick mix” method
(sometimes referred to as the “dump”
method) is ideal for simple cakes, such as
yellow cake and white cake. This method
calls for combining dry ingredients with
most or all liquid ingredients in one step.
NOTE: If ingredients in very bottom of
bowl are not thoroughly mixed, then the
beater is not far enough into the bowl.
See “Beater to Bowl Clearance”.
Cake Mixes
When preparing packaged cake mixes,
use Speed 2 for low speed, Speed 4 for
medium speed, and Speed 6 for high
speed. For best results, mix for the time
stated on the package directions.
More elaborate cakes, such as a torte,
should be prepared using the traditional
cake mixing method. With this method,
sugar and the shortening, butter,
or margarine are thoroughly mixed
(creamed) before other ingredients are
added. For all cakes, mixing times may
change because your KitchenAid® Stand
Mixer works more quickly than other
mixers. In general, mixing a cake with
the KitchenAid® Stand Mixer will take
about half the time called for in most
cake recipes.
Adding Nuts, Raisins,
or Candied Fruits
In general, solid materials should be
folded in the last few seconds of mixing
on Stir Speed. The batter should be thick
enough to prevent the fruit or nuts from
sinking to the bottom of the pan during
baking. Sticky fruits should be dusted
with flour for better distribution in the
batter.
To help determine the ideal mixing time,
observe the batter or dough and mix
only until it has the desired appearance
described in your recipe, such as “smooth
and creamy.”
Liquid Mixtures
Mixtures containing large amounts of
liquid ingredients should be mixed at
lower speeds to avoid splashing.
Increase speed only after mixture
has thickened.
To select the best mixing speeds, see
“Speed Control Guide”.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Basic White Bread
1/2 cup (120 mL)
low-fat milk
3 tbs (45 mL) sugar
2 tsp (10 mL) salt
3 tbs (45 mL) butter or
margarine
2 packages active dry
yeast
1-1/2 cups (355 mL)
warm water
(105°F to 115°F)
[40°C to 46° C]
5-6 cups (1.2 to 1.5 L)
all-purpose flour
Place milk, sugar, salt, and butter in small saucepan.
Heat over low heat until butter melts and sugar
dissolves. Cool to lukewarm.
Dissolve yeast in warm water in warmed mixer bowl.
Add lukewarm milk mixture and 4 1/2 cups (1 L) flour.
Attach bowl and dough hook to mixer. Turn to Speed
2 and mix about 1 minute.
Continuing on Speed 2, add remaining flour, 1/2 cup
(120 mL) at a time, and mix about 1-1/2 minutes,
or until dough starts to clean sides of bowl. Knead
on Speed 2 about 2 minutes longer, or until dough
is smooth and elastic. Dough will be slightly sticky to
the touch.
Place dough in greased bowl, turning to grease top.
Cover. Let rise in warm place, free from draft, about
1 hour, or until doubled in bulk.
Punch dough down and divide in half. Shape each half
into a loaf, and place in greased 8-1/2 x 4-1/2 x 2-1/2"
(21.25 x 11.25 x 6.25 cm) baking pans. Cover. Let rise
in warm place, free from draft, about 1 hour, or until
doubled in bulk.
Bake at 400°F (200°C) for 30 minutes, or until golden
brown. Remove from pans immediately and cool on
wire racks.
Yield: 32 servings (16 slices per loaf).
Per serving: About 95 cal, 3 g protein, 18 g carb,
1 g fat, 0 mg chol, 148 mg sodium.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Care and Cleaning
• Unplug the Stand Mixer before
3. Remove the nut from the lifter rod
located inside the column, then remove
the washer and spring.
cleaning or disconnect power.
• Stainless steel bowl, flat beater,
wire whip, and spiral dough hook
may be washed in an automatic
dishwasher. Or, clean them thoroughly
in hot sudsy water and rinse completely
before drying. Do not store beaters on
shaft.
NOTE: Note the order that they were
assembled (the washer goes between
the spring and nut), for reassembly.
Nut
• The bowl is dishwasher-safe. It can
also be hand-washed in hot sudsy
water, rinsed thoroughly, and dried.
• Wipe the Stand Mixer with a clean
damp cloth. Do not use abrasive
cleansers or scouring pads and do
not immerse the Stand Mixer in
water.
• Wipe the beater shaft frequently,
removing any residue that may
accumulate.
4. Loosen the screw holding the
bowl clip to the front of the bowl
support – it is not necessary to
remove the screw all of the way.
This allows the bowl support to
slide down.
To remove the Bowl Support
for cleaning
1. Unplug Stand Mixer or disconnect
power.
2. Remove the Stand Mixer base by
removing the 3 screws located on
the bottom of the mixer. Remove
the vent screen and the mixer base.
Screws
Screw
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Care and Cleaning (cont.)
5. Slide the bowl support down so that
Planetary Cleaning Instructions
1. Unplug the Stand Mixer or disconnect
the power.
2. Remove the retaining ring with
retaining ring pliers, slide the ring
and the washer down the shaft.
the tabs on the back of the bowl
support line up with the slots
in the column. Remove the bowl
support by passing the tabs
through the slots.
Retaining Ring
Groove
Washer
Retaining Ring
6. Clean the bowl support and column
with the mild detergent and a wash
cloth. Do not use abrasive cleansers
or scouring pads.
7. To reassemble, reverse steps
1 through 6.
3. Clean the shaft, retaining ring, and
washer with a mild detergent and wash
cloth. Do not use abrasive cleaners or
scouring pads. Do not immerse the
stand mixer in water.
4. To reassemble, reverse steps 1 through 4,
making sure retaining ring is fully seated
into groove.
Flat Beater Cleaning Instructions
1. To clean the drain hole in the flat
beater, use a small round brush,
toothpick, or skewer to run through
the hole.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
|