IMPRESSA X7-S
Instructions for use
Download from Www.Somanuals.com. All Manuals Search And Download.
A
B
II
I
Fig. 1
Fig. 2
Fig. 3
2
1
3
Fig. 4
Fig. 5
Fig. 6
III
III
IV
Fig. 7
Fig. 8
Fig. 9
‘
‘
‘
Fig. 12
Fig. 10
Fig. 11
Fig. 13
Download from Www.Somanuals.com. All Manuals Search And Download.
12
13
14
11
15
16
10
9
8
7
17
18
6
5
19
4
3
2
1
J
A
B
C
I
P R O G.
+
E X I T
–
D
F
G
K
L
E
H
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating elements JURA IMPRESSA X7-S
1. Drip tray
2. Drip tray cover
3. Ground container
4. Heigt-adjustable coffee and cappuccino spout
5. Draw-off button 2 coffees
6. Draw-off button 2 Espressos
7. Draw-off button 1 coffee
8. Draw-off button 1 Espresso
9. Draw-off button Cappuccino
10. Selector key for grinder
11. Display dialogue system
12. Grinders
13. Funnel for cleaning tablets
14. Water tank
15. Cover for programming keys
16. Draw-off button steam
17. Draw-off button hot water
18. Pivoting nozzle for hot water/steam
19. Accessory drawer
Programming keys/Coffee key
A ON/OFF switch
B Draw-off button pot
C Draw-off button milk froth
D Rinsing key
E Draw-off button hot water
F
Cleaning button
G Descaling button
H Draw-off buttom steam
I
Open program
J
Forward-setting of criteria/changing of memory
indications up-wards
K Close program
L Back-setting of criteria/changing of memory
indications downwards
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
JURA IMPRESSA X7-S
1. Description...........................................................................................................................................page
2. Safety instructions .................................................................................................................................page
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
9
9
9
9
9
9
9
9
9
9
2.1
2.2
Warnings ....................................................................................................................................page
Safety precautions.........................................................................................................................page
3. Preparing the machine ............................................................................................................................page
3.1
3.2
3.3
3.4
Checking the mains voltage..............................................................................................................page
Checking the fuse ..........................................................................................................................page
Filling the water tank.....................................................................................................................page
Adding coffee beans.......................................................................................................................page
4. Switching the machine on ........................................................................................................................page
5. Rinsing the machine ...............................................................................................................................page
6. Selecting the grinder...............................................................................................................................page
6.1
Setting the grinder ........................................................................................................................page
7. Adjusting the grinder ..............................................................................................................................page
8. Adjusting of water hardness......................................................................................................................page
9. Installing the CLARIS plus filter cartridge...................................................................................................page
9.1
9.2
Installing the filter ........................................................................................................................page
Replacing the filter........................................................................................................................page
10. Coffee ................................................................................................................................................page
10.1 Drawing off coffee/espresso..............................................................................................................page
10.2 Drawing off Cappuccino ..................................................................................................................page
10.3 Drawing off pots of coffee ...............................................................................................................page
11. Drawing off hot water .............................................................................................................................page
12. Drawing off steam..................................................................................................................................page
13. Drawing-off milk froth ............................................................................................................................page
14. Switching the machine off........................................................................................................................page
15. Programming........................................................................................................................................page
15.1 Programming grinding amount .........................................................................................................page
15.2 Programming temperature...............................................................................................................page
15.3 Programming amount of water .........................................................................................................page
15.4 Programming amount of milk...........................................................................................................page
15.5 Programming portion of hot water.....................................................................................................page 10
15.6 Programming water hardness ...........................................................................................................page 10
15.7 Programming clock........................................................................................................................page 10
15.8 Programming machine on................................................................................................................page 10
15.9 Programming machine off ...............................................................................................................page 10
15.10 Draw-offs ....................................................................................................................................page 10
15.11 Programming language...................................................................................................................page 10
16. Care and maintenance.............................................................................................................................page 10
16.1 Fill water ....................................................................................................................................page 10
16.2 Installation of an automatic filling device............................................................................................page 10
16.3 Empty grounds container.................................................................................................................page 10
16.4 Empty drip tray ............................................................................................................................page 10
16.5 Grounds container missing...............................................................................................................page 10
16.6 Drip tray missing ..........................................................................................................................page 10
16.7 Fill beans ....................................................................................................................................page 11
16.8 Removing foreign objects ................................................................................................................page 11
16.9 Clean machine..............................................................................................................................page 11
16.10 Machine scaled.............................................................................................................................page 11
16.11 Clean contacts..............................................................................................................................page 11
16.12 General cleaning instructions............................................................................................................page 11
16.13 Disassembling and cleaning the dual spout...........................................................................................page 11
17. Cappuccino cleaning ...............................................................................................................................page 11
18. Combined cleaning .................................................................................................................................page 11
19. Coffee cleaning......................................................................................................................................page 12
20. Descaling .............................................................................................................................................page 12
21. Disposal...............................................................................................................................................page 12
22. Adjustments by the JURA service technician.................................................................................................page 12
23. Tips for perfect coffee .............................................................................................................................page 12
24. Messages .............................................................................................................................................page 13
25. Problems .............................................................................................................................................page 13
26. Legal information ..................................................................................................................................page 14
27. Technical specifications ...........................................................................................................................page 14
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Important information for the user
3. Preparing the machine
Thank you for choosing this JURA product.
3.1 Checking the mains voltage
Please study these instructions carefully before using your new ma-
chine and keep them in a safe place for easy reference in the futu-
re.
Should you require further information or should particular pro-
blems occur that are not dealt with in sufficient detail for you in
these operating instructions, then please ask your local dealer for
the information you require or get in touch with us directly.
The machine has been set to the correct mains voltage in the
factory. Ensure that your mains voltage corresponds to the details
on the rating plate attached to the reverse of your machine
(Fig. 1/A).
E
3.2 Checking the fuse
Check whether the fuse matches your machine.
You will also find useful tips on operation and maintenance
Don’t forget to check out the Knowledge Builder our ani-
mated operating instructions. LEO, our assistant, will take
you through all the functions.
3.3 Filling the water tank
Ⅲ Remove the water tank and rinse it out well with cold tap water.
Ⅲ Then fill the water tank and put it back into the machine. Please
ensure that the tank locks in properly .
Please only use fresh, cold water. Never fill up with milk,
mineral water and other fluids. You can also top up water
without removing the tank. Simply remove the cover and
pour in the water from above with a vessel and replace the
lid again.
1. Description
The first IMPRESSA for the office and small gastronomy area is
outstanding not only because of its modern technology, but also a
number of features, and prepares 1 or 2 cups of espresso/coffee in
only one brewing process. The Intelligent Pre Brew Aroma System
(I.P.B.A.S.©) ensures that the full coffee aroma is made use of and
supplies the best espresso/coffee, guaranteed to be covered by a
splendid froth. Optionally, coffee can be used from either of the
grinders, and the mixture can be programmed individually. Draw-
ing-off Cappuccino is possible at the push of a button and without
moving the cups. Integrated rinsing, cleaning and de-scaling pro-
grammes ensure perfect cleanliness at the push of a button.
3.4 Adding coffee beans
To ensure that your machine gives satisfaction for a long
time and to avoid repairs, please note that the grinder on
your JURA coffee machine is not suitable for coffee beans
that have been treated with additives (e.g. sugar) during or
after roasting. Use of such coffee blends can result in
damage to the grinder. Any repair costs incurred as a result
are not covered by the warranty provisions.
2. Safety instructions
2.1 Warnings
You have the possibility of adding two different sorts of coffee
beans.
Ⅲ Remove the cover from the bean container.
Ⅲ Children are unaware of the dangers that can be caused by
electrical machines; for this reason, children should never be left
unsupervised with electrical machines.
Ⅲ Clean out any dirt or foreign objects from the bean container.
Ⅲ Fill coffee beans into the bean container and replace the cover
again.
Ⅲ The machine may only be used by people who have been
instructed.
Ⅲ Never use a faulty machine or one with a damaged power cable.
4. Switching the machine on
Ⅲ Never repair or open the machine yourself. Repairs may only be
done by authorised service centres using original spare parts and
accessories.
Ⅲ Operate the switch on the reverse of the machine (Fig. 1/II).
Ⅲ Switch the machine on with the ON/OFF
: PLEASE WAIT
Ⅲ Place an empty cup under the coffee spout (4).
operating switch.
Ⅲ Never immerse the machine in water.
Ⅲ
Ⅲ
: RINSE UNIT
2.2 Safety precautions
Ⅲ Never expose the machine to the effects of weather (rain, snow,
frost) and never operate it with your hands wet.
The rinsing is done first via the Cappuccino nozzle, after
which the coffee spout is cleaned.
Ⅲ Place the IMPRESSA on a firm, level base that is resistant to
any water that may leak. Never stand on hot or warm surfaces
(oven hobs). Keep out of the reach of children.
5. Rinsing the machine
Ⅲ Remove the plug from the power socket if you are away for
some time (holidays etc.).
A rinsing process is automatically started when the machine is
switched off.
However, if no Cappuccino has been drawn off, the rinsing is only
done via the coffee spout when switching off. When the machine
has been switched off and has cooled down, the rinsing process is
requested when it is switched on again.
Ⅲ Always remove the plug from the power socket before cleaning.
Ⅲ When removing the plug from the power socket, never tug on
the cord or the machine itself.
Ⅲ The machine is connected to the mains power socket via an
electric cable. Please ensure that no-one trips over the cable and
pulls the machine down. Keep children and pets at a distance.
6. Selecting the grinder
Ⅲ Never put the machine or parts of it into the dishwasher.
You can select the grinder manually
Ⅲ To prevent overheating, please put the machine in a place with a
good circulation of air.
Ⅲ Press the key
1x or 2x. The light above the key tells you
which grinder has been activated (grinder left or grinder right).
Ⅲ If you use de-scaling agents containing acid, remove any
splashes and drips on sensitive surfaces, in particular natural
stone and wood surfaces, straight away or take corresponding
safety precautions.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
6.1 Setting the grinder
9. Installing the CLARIS plus filter cartridge
So that the coffee can be matched to the grinder as well as possi-
ble, carry out the following steps:
If the CLARIS plus filter cartridge is installed properly you
don’t have to de-scale your machine anymore. For more
information on the CLARIS plus filter cartridge refer to the
brochure “CLARIS plus. Hard on limescale. Gentle on your
coffee machine.”
Ⅲ Press the key
Ⅲ Draw off 6 coffee and 6 espresso by manually selecting the
grinder “left” and then the grinder “right”.
We recommend that you also readjust the grinder after:
– a change of sort of coffee beans
– extreme changes of the degree of grinding
– service
9.1 Installing the filter
First installation of a CLARIS plus filter cartridge must
be carried out by a service engineer. Contact your service
partner.
7. Adjusting the grinder
9.2 Replacing the filter
You have the opportunity of adapting the grinder to the roast of
your coffee. We recommend the following:
After drawing off 50 liters the filter cartridge will be used
up. Please monitor the period of use of the CLARIS plus
filter cartridge (max. 2 months) using the scale on the
cartridge holder by the water tank.
for a light roast Ǟ a finer adjustment
for a dark roast Ǟ a coarser adjustment
Ⅲ To adjust the grinding, turn the setting rings into the required
position (Fig. 2)
Ⅲ
: Replace water filter
Ⅲ You have the following options:
the smaller the dots, the finer the grinding
the larger the dots, the coarser the grinding
1. Switch off your IMPRESSA X7-S.
2. Press the following key combination (Fig. 11). NB: Press the
keys at the same time.
The grinding may only be adjusted with the grinder in
operation.
Ⅲ
: OK
3. Empty the water tank and install the filter cartridge together with
the cartridge holder in the water tank, applying a gentle pressure
downward. Move back the cartridge holder until it engages
audibly (Fig. 12).
8. Adjustment of water hardness
Water is heated in the machine. This leads to scale as a result of
use, which is automatically shown on the display. The machine
must be adjusted to match the hardness of the water used. For this,
please use the enclosed test stick.
4. Fill the water tank with cold, fresh tap water and reinstall it.
5. After replacing the filter draw off 0.5 liters of water.
The water may be slightly coloured (not harmful)
1° water hardness on the German scale corresponds to 1.79°
on the French scale.
10. Coffee
The machine has 5 hardness settings to choose from. The indica-
tions on the display mean:
10.1 Drawing off coffee / espresso
WATER HARDNESS
LEVEL —
Ⅲ
: SELECT PRODUCT
Water hardness function switched off
Ⅲ Place 1 or 2 cups, as necessary, under the coffee spout (4) and
press the required selection switch. The pre-brew system
(I.P.B.A.S©) moisturises the coffee powder, briefly interrupts the
discharge and then starts the actual brewing procedure.
WATER HARDNESS German water hardness 1 – 7°
LEVEL 1 French water hardness 1.79 – 12.53°
WATER HARDNESS German water hardness 8 – 15°
LEVEL 2 French water hardness 14.32 – 26.85°
You can interrupt the draw-off prematurely by pressing any
of the coffee draw-off buttons. In order to obtain outstanding
froth, you can adapt the coffee spout (4) individually to
match the size of your cups.
WATER HARDNESS German water hardness 16 – 23°
LEVEL 3 French water hardness 28.64 – 41.14°
WATER HARDNESS German water hardness 24 – 30°
LEVEL 4 French water hardness 42.96 – 53.7°
10.2 Drawing off cappuccino
Ⅲ
: SELECT PRODUCT
In the factory, the machine is set to hardness level 3. You can alter
this setting. Proceed as follows:
Ⅲ Put milk/Tetra Pak into a jug and immerse the cappuccino tube
into the milk.
Ⅲ Switch the machine on with the ON/OFF
: PLEASE WAIT
Ⅲ Press the key PROG. (I) until an acoustic signal is heard.
operating switch.
Ⅲ Place 1 cup under the coffee spout and press the draw-off key
. The machine firstly prepares the milk froth, then the coffee
(Fig. 3).
Ⅲ
Ⅲ
: AJUST COFFEE QUANTITY / SELECT
PRODUCT
You can interrupt the milk froth and the coffee prematurely
by pressing the draw-off key once more.
+
Ⅲ Press the key
until the following report appears:
10 min. after the draw-off of Cappuccino, a rinsing is auto-
matically started. The rinsing is announced in advance by an
acoustic signal.
Ⅲ
: WATER HARDNESS LEVEL 3
Ⅲ Press the key PROG., an acoustic signal is heard and the level
set flashes.
+
-
Ⅲ By pressing the key
store, press the key PROG. An acoustic signal is heard.
or
you can set the required level. To
Ⅲ Press the key EXIT (K).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
10.3 Drawing off pots of coffee
ꢀ Draw-offs
ꢀ Language
Ⅲ
: SELECT PRODUCT
Ⅲ Place 1 pot under the coffee spout (4) and press the draw-off key
(pot of coffee). Your pot of coffee is brewed in a number of cy-
cles. The number of cycles is shown in the display.
15.1 Programming grinding amount
E
Ⅲ Switch your machine on the with ON/OFF
operating switch.
You can interrupt the draw-off prematurely at any time by
pressing the draw-off key again.
Ⅲ Press the key PROG. until an acoustic signal is heard.
: ADJUST COFFEE QUANTITY /
SELECT PRODUCT
Ⅲ Press the required draw-off key.
: (selected product)
Ⅲ
11. Drawing off hot water
Ⅲ
Ⅲ
: SELECT PRODUCT
Ⅲ Place a cup under the pivoting nozzle (18) and press the draw-
off key
.............. ..............
II
–
+
+
-
Ⅲ By pressing the key
be ground.
or
you can determine the amount to
.
Ⅲ
: PORTION HOT WATER
Ⅲ To store, press the key PROG.
Ⅲ The draw-off of the programme portion of hot water stops auto-
matically.
Ⅲ
: (selected product)
Ğ: 100% ġ: 0%
You can determine the allocation of the grinder “left” or “right”.
You can interrupt the draw-off prematurely at any time by
pressing the draw-off key again.
+
-
Ⅲ By pressing the key
or
you can change the values.
Ⅲ To store, press the key PROG.
: ADJUST COFFEE QUANTITY /
SELECT PRODUCT
Ⅲ Press the required draw-off key, the key
When water is drawn off, there can be splattering at the
beginning. The pivoting nozzle becomes hot. Avoid direct
contact with the skin.
Ⅲ
+
in order to reach the
next phase or the key EXIT to quit the programming.
12. Drawing off steam
Ⅲ
: SELECT PRODUCT
15.2 Programming Temperature
Ⅲ Place a cup with the liquid to be heated under the pivoting
Ⅲ
: ADJUST TEMPERATURE / SELECT PRODUCT
nozzle (18) and press the draw-off key
: STEAM ACTIVE
.
Ⅲ Press the required draw-off key.
Ⅲ
Ⅲ
: (selected product)
STAND. TEMP.
Ⅲ To end the draw-off of steam, press the key
.
+
-
Ⅲ Select the required temperature with the keys
standart)
or
(high or
When steam is drawn off, there can be splattering at the
beginning. The pivoting nozzle becomes hot. Avoid direct
contact with the skin.
Ⅲ To store, press the key PROG.
Ⅲ
: ADJUST TEMPERATURE / SELECT PRODUCT
+
Ⅲ Press the required draw-off key, the key
next phase or the key EXIT to quit the programming.
in order to reach the
13. Drawing-off milk froth
Ⅲ
: SELECT PRODUCT
Ⅲ Pour milk/Tetra Pak into a jug and immerse the Cappuccino tube
into the milk.
15.3 Programming amount of water
Ⅲ Place 1 cup under the coffee spout (4) and press the draw-off
Ⅲ
: ADJUST WATER QUANTITY /
SELECT PRODUCT
Ⅲ Press the required draw-off key.
key
.
The programme amount is prepared and stops automatically.
Ⅲ
: (selected product)
WATER 90 ML
You can interrupt the draw-off prematurely at any time by
pressing the draw-off key again.
+
-
Ⅲ You can change the value by pressing the key
Ⅲ To store, press the key PROG.
or
.
10 min. after the draw-off of milk, a rinsing is automatically
started. The rinsing is announced in advance by an acoustic
signal.
Ⅲ
: ADJUST WATER QUANTITY /
SELECT PRODUCT
+
Ⅲ Press the required draw-off key, the key
next phase or the key EXIT to quit the programming.
in order to reach the
14. Switching the machine off
Ⅲ Switch the machine off with the ON/OFF
operating switch. A
rinsing is automatically started when the machine is switched
off.
15.4 Programming amount of milk
Ⅲ
: ADJUST MILK QUANTITY / SELECT
PRODUCT
Ⅲ Press the key
15. Programming
or
The following phases can be programmed:
Ⅲ
: (selected product)
10 SEC.
ꢀ Grinding amount
ꢀ Temperature
ꢀ Amount of water
ꢀ Amount of milk
ꢀ Portion of hot water
ꢀ Water hardness
ꢀ Clock
+
-
Ⅲ You can alter the time by pressing the keys
time from 3 – 60 sec.)
or
(draw-off
Ⅲ To store, press the key PROG.
Ⅲ
: ADJUST MILK QUANTITY / SELECT
PRODUCT
ꢀ Machine on
ꢀ Machine off
+
Ⅲ Press the required draw-off key, the key
next phase or the key EXIT to quit the programming.
in order to reach the
9
Download from Www.Somanuals.com. All Manuals Search And Download.
15.5 Programming portion of hot water
15.10 Draw-offs
Ⅲ Place a cup under the pivoting nozzle (18).
Ⅲ
: AUDIT TRAIL (total audit trail)
Ⅲ
Ⅲ
Ⅲ
: HOT WATER PORTION / PRESS FOR HOT
: ENOUGH HOT WATER ? / PRESS FOR HOT
: HOT WATER PORTION / PRESS FOR HOT
Ⅲ Press the required draw-off key to inquire the draw-offs.
WATER
WATER
WATER
+
Ⅲ Press the key
EXIT to quit the programming.
in order to reach the next phase or the key
Draw-offs of steam cannot be inquired.
+
Ⅲ Press the key
in order to reach the next phase or the key
EXIT to quit the programming.
15.11 Programming language
Ⅲ Press the key PROG.
15.6 Programming water hardness
+
-
Ⅲ By pressing the keys
or
you can select the required
language.
Ⅲ
: WATER HARDNESS
LEVEL 3
Ⅲ To store, press the key PROG.
+
Ⅲ Press the key PROG.
Ⅲ Press the key
EXIT to quit the programming.
in order to reach the next phase or the key
+
-
Ⅲ You can set the water hardness by pressing the keys
Ⅲ To store, press the key PROG.
or
.
+
Ⅲ Press the key
in order to reach the next phase or the key
16. Care and maintenance
16.1 Fill water
EXIT to quit the programming.
To determine the water hardness, please read Chapter 8
“Setting the water hardness”
Ⅲ
: FILL WATER TANK
Ⅲ When this display lights up, no more drawing-off is possible. Fill
with water as described under Section 3.3.
15.7 Programming CLOCK
The water tank should be rinsed out every day and filled
with fresh water.
If you use an automatic filling device, we recommend that
you rinse the water tank out regularly and fill it up with fresh
water.
Programming the clock is necessary if the function “Machine on”
is used.
Ⅲ
: TIME.
—:—
Ⅲ Press the key PROG.
Ⅲ By pressing the keys
+
-
or
you can set the hours.
you can set the minutes.
16.2 Installation of an automatic filling device
Ⅲ To store, press the key PROG.
Please read the operating instructions of the automatic filling
device.
+
-
Ⅲ By pressing the keys
or
Ⅲ To store, press the key PROG.
+
Ⅲ Press the key
EXIT to quit the programming.
in order to reach the next phase or the key
16.3 Empty grounds container
The grounds container collects the coffee grounds.
Ⅲ
: EMPTY DRAWER
15.8 Programming machine on
Ⅲ When this display lights up, no more draw-offs are possible and
Programming the clock is necessary if the function “Machine on”
is used.
the grounds container must be emptied.
Ⅲ Carefully remove the drip tray – there is water in it. Then re-
Ⅲ
: UNIT
move the grounds container (Fig. 4).
ON —:—
Ⅲ Press the key PROG.
Ⅲ By pressing the keys
+
-
or
you can set the hours.
you can set the minutes.
16.4 Empty drip tray
Ⅲ To store, press the key PROG.
Ⅲ
: EMPTY DRIP TRAY
+
-
Ⅲ By pressing the keys
or
Ⅲ When this display lights up, no more draw-offs are possible and
the drip tray must be emptied.
Ⅲ To store, press the key PROG.
+
Ⅲ Press the key
EXIT to quit the programming.
in order to reach the next phase or the key
Ⅲ Carefully remove the drip tray – there is water in it (Fig. 4).
The display —:— means that the function is switched off.
16.5 Grounds container missing
Ⅲ
: DRAWER MISSING
Ⅲ When this display lights up, the grounds container has not been
inserted properly or is missing.
15.9 Programming machine off
Ⅲ
: UNIT OFF
5.0 HRS.
16.6 Drip tray missing
Ⅲ Press the key PROG.
Ⅲ By pressing the keys
off or 0.5 hrs. – 9 hrs.).
Ⅲ
: DRIP TRAY MISSING
+
-
or
you can set the hours (switched
Ⅲ When this display lights up, the drip tray has not been inserted
properly.
Ⅲ To store, press the key PROG.
+
Ⅲ Press the key
EXIT to quit the programming.
in order to reach the next phase or the key
10
Download from Www.Somanuals.com. All Manuals Search And Download.
16.7 Fill beans
16.13 Disassembling and cleaning the dual spout
Ⅲ
: FILL COFFEE BEANS
We recommend to disassemble and clean the dual spout if
you make milk products regularly.
Ⅲ Fill with beans as described in Chapter 3.4.
Ⅲ Remove the cover of the height-adjustable dual spout.
Ⅲ Take the spouts apart (Fig. 13).
The display FILL COFFEE BEANS goes off after a draw-off
of coffee.
We recommend that you clean the bean container out with a
dry cloth from time to time before filling. For this, switch the
machine off.
E
Ⅲ Thoroughly rinse all the parts with warm water.
Ⅲ Reassemble the parts (Fig. 13).
Ⅲ Attach the spouts to the IMPRESSA X7-S.
Ⅲ Put back the cover, making sure it locks into place.
16.8 Removing foreign objects
Use corresponding brushes for carrying out the cleaning
steps described in sections above.
Ⅲ Switch your machine off with the ON/OFF
Ⅲ Remove the plug from the power socket.
operating switch.
Ⅲ Open the hinged door on the reverse of the machine (Fig. 5).
17. Cappuccino cleaning
Ⅲ Press the slides downwards (Fig. 6) and remove the bean con-
tainer.
Carry out this cleaning every day.
Ⅲ Remove any beans with a vacuum cleaner.
Ⅲ Position the spanner (Fig. 7).
Once the cleaning sequence has started, it must not be interrupted.
It takes about 5 min.
Ⅲ Turn the spanner in an anti-clockwise direction until the foreign
object becomes loose.
Ⅲ Switch the machine on with the ON/OFF
Ⅲ Press the key until an acoustic signal is heard.
: SELECT
switch.
Ⅲ Remove remaining powder with a vacuum cleaner.
Ⅲ Now replace the bean container and pull the slides to the front
before closing the door (Fig. 6).
Ⅲ
CLEANING
– +
+
Ⅲ Press the key
.
16.9 Clean machine
Ⅲ
: CAPPUCCINO CLEANING
Ⅲ Press the key again.
: CLEANER FOR CAPPUCCINO /
PRESS CLEANING
Ⅲ
: CLEANING NECESSARY
Ⅲ
After 220 draw-offs or 180 rinsings, the machine has to be cleaned.
You can continue to draw off coffee and hot water/steam. We re-
commend that you clean the machine (Chapter 19) within the next
few days.
Place a vessel of at least 0.5 l under the coffee spout (4).
Carry out a cleaning (Chapter 19).
Ⅲ Put about 25 cl of water into a vessel and add the cleaner. You
can see the amount of cleaner on the label or the sheet accompa-
nying the product in question. Immerse the Cappuccino tube
into it.
16.10 Machine scaled
Ⅲ Press the key
: CAPPUCCINO CLEANING / PLEASE WAIT
Ⅲ An acoustic signal is heard.
: WATER FOR CAPPUCCINO / PRESS CLEAN
.
Ⅲ
: DECALCIFYING NECESSARY
Ⅲ
The machine recognises the necessity of de-scaling. You can con-
tinue to draw off coffee or hot water/steam. We recommend that
you carry out the de-scaling (Chapter 20) within the next few days.
Ⅲ
Fill a vessel with fresh water and immerse the Cappuccino
tube into it.
16.11 Clean contacts
Ⅲ
: EMPTY DRIP TRAY / CLEAN CONTACTS
Ⅲ Press the key
.
The de-scaling residue in the area of the contacts must be removed.
Please proceed as follows:
Ⅲ
: CAPPUCCINO CLEANING / PLEASE WAIT
Ⅲ Rinse the contact fasteners in trough (B) (Fig. 8) as well as the
contacts (A) with hot water and washing-up liquid. Then ad-
ditionally clean the contact fasteners in trough (B) with a brush.
18. Combined cleaning
Once the cleaning sequence has started, it must not be interrupted.
It takes about 20 min.
Ⅲ Switch the machine on with the ON/OFF
Ⅲ Press the key until an acoustic signal is heard.
: SELECT
CLEANING
switch.
16.12 General cleaning instructions
Ⅲ Never use abrasive articles or corrosive chemicals to clean your
machine.
Ⅲ
– +
Ⅲ Wipe off the inside and outside of the casing with a soft, damp
cloth.
+
Ⅲ Press the key
2x.
Ⅲ
: ENTIRE CLEANING
Ⅲ Press the key
: EMPTY DRAWER / INSERT
TABLET (Fig. 10) /
CLEANER FOR CAPPUCCINO
Ⅲ Clean the pivoting nozzle after every use.
.
Ⅲ After heating milk, draw off a little hot water, in order to clean
the pivoting nozzle from the inside.
Ⅲ
Ⅲ The water tank must be rinsed and filled with fresh water every
day.
Ⅲ Place a sufficiently large vessel under the coffee spout.
If you see any visible scaling in the water tank, you can
remove it with a customary de-scaling agent.
Ⅲ Put about 25 cl of water into a vessel and add the cleaner. You
can see the amount of cleaner on the label or the sheet accompa-
nying the product in question. Immerse the cappuccino tube into
it.
Remove the water tank in order to clean it.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
21. Disposal
Ⅲ Press the key
.
Ⅲ
Ⅲ
: ENTIRE CLEANING / PLEASE WAIT
Please dispose of old machines in an environmentally
compatible way
Old machines contain valuable materials capable of being
recycled which should be salvaged for recycling. Please
therefore dispose of old machines via suitable collection
systems.
: WATER FOR CAPPUCCINO / PRESS CLEAN
Fill a vessel with fresh water and immerse the Cappuccino
tube into it.
Ⅲ Press the key
.
Ⅲ
Ⅲ
: COMBI CLEANING / PLEASE WAIT
: EMPTY DRAWER
22. Adjustments by the JURA service technician
The following adjustments/alterations can only be done by a
JURA service technician.
19. Coffee cleaning
– Re-arrangement of the key occupancy of the coffee
products
– Alteration of the cycles in “pot of coffee” draw-off
– Filter capacity
Once the cleaning sequence has started, it must not be interrupted.
It takes about 15 min.
Ⅲ Switch the machine on with the ON/OFF
Ⅲ Press the key until an acoustic signal is heard.
: SELECT
CLEANING – +
switch.
23. Tips for perfect coffee
Ⅲ
Height-adjustable coffee spout
You can adjust the height of the coffee spout to the size of your
+
Ⅲ Press the key
3x.
cups.
Ⅲ
: COFFEE CLEANING
Ⅲ Press the key
: EMPTY DRAWER / INSERT TABLET
Grinding
Ⅲ
Please refer to Chapter 7 “Setting of grinder“
(Fig. 10) /
PRESS CLEANING
Ⅲ Place a sufficiently large vessel under the coffee spout (4).
Ⅲ Press the key
Pre-warm cups
You can warm the cups in advance with hot water or steam. The
smaller the quantity of coffee, the more important the warming of
the cups.
.
Ⅲ
Ⅲ
: COFFEE CLEANING/ PLEASE WAIT
: EMPTY DRAWER
Sugar and cream
Heat is lost by stirring the contents of the cup. Adding milk or
cream from the fridge considerably lowers the temperature of the
coffee.
20. Descaling
The machine has an integrated descaling programme. The process
takes about 40 min.
Once the descaling process has started, it must not be inter-
rupted
If you use descaling agents containing acid, remove any splashes
and drips on sensitive surfaces, in particular natural stone and
wood surfaces, straight away or take corresponding safety pre-
cautions.
Ⅲ Switch the machine off with the ON/OFF
switch.
Ⅲ Press the key until an acoustic signal is heard.
Ⅲ
Ⅲ
: EMPTY DRIP TRAY
: INSERT AGENT IN TANK / PRESS
DECALCIFYING
Dissolve 3 tablets completely in 0.7 litres of water in a vessel
and pour the mixture into the empty water tank.
Place two sufficiently large vessels under the pivoting nozzle
(18) and the coffee spout.
Ⅲ Press the key
: UNIT DECALCIFYING / PLEASE WAIT
Ⅲ An acoustic signal is heard.
.
Ⅲ
Ⅲ
Ⅲ
: EMPTY DRIP TRAY
: FILL WATER TANK
Ⅲ Place a vessel under the pivoting nozzle (18) and the coffee
spout (4).
Ⅲ
Ⅲ
: PRESS DESCALING
: UNIT DECALCIFYING / PLEASE WAIT
Ⅲ An acoustic signal is heard
Ⅲ
: EMPTY DRIP TRAY / CLEAN CONTACTS
(Chapter 16.4).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
24. Messages
Cause Action
FILL WATER TANK
FILL COFFEE BEANS
EMPTY DRAWER
The tank is empty
Top up with water
The water level display in the tank has jammed
Empty tank, rinse out and replace when it has
been filled
E
The tank is scaled; the water level display is
jammed
Remove the tank, de-scale it, rinse well,
fill and put in again
The bean container is empty
Fill up with beans
Although beans have been filled, the display
does not go off
Draw off a cup of coffee.
“FILL BEANS” only goes off after a draw-off
A foreign body has got jammed
Remove the foreign body as described in
Section 16.8 “Removing foreign objects”
The grounds container is full
Remove the tray, empty the grounds container,
replace the tray
The display appears after
only a few cups
Leave the machine switched on while the grounds
container is emptied.
The counter is only reset if the machine is
switched on.
DRIP TRAY MISSING
EMPTY DRIP TRAY
The drip tray has not locked in properly
The drip tray is full
Position the tray correctly.
Carefully remove the tray, empty it, rinse it out
and replace it
The display does not go off despite the tray
being emptied
Remove the tray, clean the metal contacts,
see Chapter 16.11
CLEANING NECESSARY 220 draw-offs or 180 rinsings have been done
Carry out cleaning according to Chapter 19
The display does not go off
despite the cleaning
Do the cleaning once more;
but do not add a cleaning tablet this time
DECALCIFYING
NECESSARY
The machine must be de-scaled
Carry out de-scaling as described in Chapter 20
The display does not go off
despite the de-scaling
De-scale the machine again; this time only with
water, without de-scaling agent
MALFUNCTION
Various causes
Call the office trader
25. Problems
Problems
Cause
Action
Coffee only drips out
when drawing off
– powder too fine
– adjust grinder to a coarser grinding
– run one or two rinse programmes.
– If the results are no better, clean
– the machine.
Coffee flow is stopped after – not enough powder in the system
the pre-brew
– draw off one cup of coffee
Grinder is very noisy
– foreign object in the grinder
– Cappuccino blocked
– refer to Chapter 16.8
Not enough froth when
frothing milk
– carry out a Cappuccino cleaning
– (refer to Chapter 17)
Device cannot be
switched on with the
ON/OFF switch
– Main switch (Fig. 1/II) not switched on
– Flat not engaged properly
– switch on
– close flap
If the messages or problems nevertheless still persist, please get in touch with your dealer or directly with the firm of
JURA Elektroapparate AG.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
26. Legal information
27. Technical specifications
These operating instructions contain all the information necessary
for the correct use, operation and maintenance of your machine.
Understanding and complying with the directives contained in
these operating instructions are essential for the use of the machine
without risk and also for safety during operation and maintenance.
These operating instructions cannot cover all imaginable uses of
the machine.
Version «CH»
Voltage:
230 V AC
1500 W
6.5 A
Output :
Intensity of current:
Safety check:
We would further point out that the contents of these operating
instructions in no way constitute a part of or amend any previous
or existing contract, agreement or legal relationship. All obligations
on the part of JURA Elektroapparate AG result from the sales
agreement in question, which also contains the complete details of
the valid warranty terms. These contractual warranty terms are
neither extended nor limited in any way by the information con-
tained in these operating instructions.
These operating instructions contain information protected by
copyright. Photocopying or translation into another language with-
out the prior written approval of JURA Elektroapparate AG are not
admissible.
Energy consumption standby:
3 Wh
Energy consumption ready to make coffee: approx. 51 Wh
Pump pressure:
2 x max. 15 bar
5.0 litres
Water tank:
Capacity, bean container:
Capacity, grounds container:
Cable length:
2 x 650 gr
max. 40 port.
approx. 1.8 m
18.5 kg
Weight:
Dimensions (BxHxD):
43 x 58.5 x 51 cm
Version «International»
Voltage:
230 V AC
2200 W
9.6 A*
Voltage:
Intensity of current:
Safety check:
Energy consumption standby:
3 Wh
Energy consumption ready to make coffee: approx. 52 Wh
Pump pressure:
2 x max. 15 bar
5.0 litres
Water tank:
Capacity, bean container:
Capacity, grounds container:
Cable length:
2 x 650 gr
max. 40 port.
approx. 1.8 m
18.5 kg
Weight:
Dimensions (BxHxD):
43 x 58.5 x 51 cm
* During the preparation of draw-offs of coffee, steam or hot water
can also be drawn off.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
|