Johnson Controls Air Conditioner TCGD18 THRU 60 User Manual
359319-BTG-G-0509  
DESCRIPTION  
The 13 SEER Series unit is the outdoor part of a versatile cli-  
mate system. It is designed with a matching indoor coil compo-  
nent from Johnson Controls Unitary Products. Available for  
typical applications this climate system is supported with acces-  
sories and documents to serve specific functions.  
TECHNICAL  
GUIDE  
FEATURES  
• Quality Condenser Coils - The coil is constructed of alumi-  
num microchannel tubing and enhanced aluminum fins for  
increased efficiency and corrosion protection.  
SPLIT-SYSTEM  
AIR CONDITIONERS  
• Protected Compressor - The compressor is internally pro-  
tected against high pressure, temperature, and externally by  
a factory installed high pressure switch. This is accomplished  
by the simultaneous operation of high pressure relief valve  
and a temperature sensor which protects the compressor if  
undesirable operating conditions occur. A liquid line filter-  
drier further protects the compressor.  
13 SEER – R-410A – 1 PHASE  
MODELS:  
TCGD18 THRU 60  
(1.5 THRU 5 NOMINAL TONS)  
• Durable Finish - The cabinet is made of pre-painted steel.  
The pre-treated galvanized steel provides a better paint to  
steel bond, which resists corrosion and rust creep. Special  
primer formulas and matted-textured finish insure less fading  
when exposed to sunlight.  
• Lower Installed Cost - Installation time and costs are  
reduced by easy power and control wiring connections.  
Available in sweat connect models only. The unit contains  
enough refrigerant for matching indoor coils and 15 feet of  
interconnecting piping. The small base dimension means  
less space is required on the ground or roof.  
• Top Discharge - The warm air from the top mounted fan is  
blown up away from the structure and any landscaping. This  
allows compact location on multi-unit applications.  
• Low Operating Sound Level - The upward air flow carries  
the normal operating noise away from the living area. The  
rigid top panel effectively isolates any motor sound. Isolator  
mounted compressor and the rippled fins of the condenser  
coil muffle the normal fan motor and compressor operating  
sounds.  
• Low Maintenance - Long life permanently lubricated motor-  
bearings need no annual servicing.  
LISTED  
• Easy Service Access - Fully exposed refrigerant connec-  
tions, and a single panel covering the electrical controls  
make for easy servicing of the unit.  
Due to continuous product improvement, specifications are  
subject to change without notice.  
• Secured Service Valves - Secured re-usable service valves  
are provided on both the liquid and vapor sweat connections  
for ease of evacuating and charging.  
Visit us on the web at www.york.com  
Additional rating information can be found at  
• U.L. and C.U.L. listed - approved for outdoor application.  
www.ahridirectory.org  
• Agency Listed - U.L. and C.U.L. listed - approved for out-  
door application. The unit is certified in accordance with the  
Unitary Small Equipment certification program, which is  
based on ARI Standard 210/240.  
WARRANTY  
Standard 5-year limited parts warranty.  
Standard 5-year limited compressor warranty.  
Extended 10-year limited parts warranty when product is  
registered online within 90 days of purchase for replace-  
ment or closing for new home construction.  
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
System Charge for Various Matched Systems  
TCGD18  
S41S1(H)  
0.048/4F1  
3 - 3  
TCGD24  
TCGD30  
S41S1(H)  
0.061/4F1  
3 - 14  
TCGD36  
S41S1(H)  
0.065/4G1  
4 - 9  
TCGD42  
S41S1(H)  
0.075/4G1  
4 - 5  
TCGD48  
TCGD60  
S41S1  
Outdoor Unit  
S41S1  
S41S1(H)  
0.073/4H1  
4 - 9  
Required Orifice or TXV 1,2  
Factory Charge, lbs-oz  
0.055/4F1  
3 - 13  
0.087/4J1  
5 - 6  
Indoor Coil3,4  
AHP18  
Additional Charge, oz  
0
–
4
–
–
–
–
4
4
–
–
–
–
4
–
–
–
0
–
–
–
–
–
4
4
–
–
–
–
4
4
0
4
4
–
–
–
–
0
4
4
–
–
0
–
–
–
0
2
–
–
–
0
2
–
–
–
–
2
–
–
–
–
0
–
–
–
–
0
0
–
–
–
–
0
0
–
2
2
–
–
–
–
–
0
2
–
–
–
–
–
–
–
0
0
–
–
–
0
8
–
–
–
0
–
–
–
–
–
–
8
–
–
–
–
8
–
–
–
–
–
–
0
0
8
–
–
–
–
–
0
–
–
–
8
–
–
–
–
0
–
–
–
–
2
–
–
–
–
–
–
–
0
–
–
–
–
0
–
–
–
0
–
–
–
–
0
4
0
–
–
–
–
0
–
–
–
–
–
–
–
4
0
–
–
–
–
–
–
–
–
4
0
–
–
–
–
0
–
–
–
–
–
4
–
–
–
0
–
–
–
0
–
0
–
–
–
–
–
4
–
–
–
–
–
–
–
0
4
–
–
–
–
0
–
–
–
0
AHP30  
AHP36  
AHP42  
AHP/SHP60  
AHX18  
AHX30  
AHX36  
AHX42  
AHX48  
–
–
–
–
0
–
–
–
–
–
AHX60  
AV*24  
AV*36  
TXV + 0  
–
–
–
0
–
–
–
–
–
0
–
–
–
–
–
0
–
–
–
–
–
–
–
–
0
–
–
–
–
0
–
–
–
–
AV/SV*48  
AV/SV*60  
F4FP024  
F4FP036  
F4FP040  
F4FV060  
F5FP048  
F5FP060  
F6FP018  
F6FP030  
F6FP036  
F6FP042  
F6FP048  
F6FP060  
FC/MC/PC/18  
FC/MC/PC32  
FC/MC/PC35  
FC/MC/PC/36  
FC/MC/PC37  
FC/MC/PC43  
FC/MC/PC48  
FC/MC/PC60  
FC/MC62  
HC18  
TXV + 2  
TXV + 2  
–
–
–
–
2
–
–
–
–
2
TXV + 2  
–
–
–
–
–
–
0
2
–
–
–
–
–
0
–
–
–
2
–
HC30  
HC36  
HC42  
HC60  
UC18  
UC36  
UC48  
UC60  
FOOTNOTES:  
1. For applications requiring a TXV use 1TVM series kit.  
2. Approved orifice shipped with outdoor unit.  
3. Systems matched with furnace or air handlers not equipped with blower-off delays may require blower Time Delay Kit 2FD06700224.  
4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.  
PROCEDURES:  
1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaporator and 15 feet of interconnecting  
line tubing.  
2. Verify the TXV and additional charge required for specific evaporator coil in the system using the above table.  
3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table.  
4. For orifice or TXV matches requiring additional charge, the refrigerant needs to be weighed in for specific coil match and lineset length.  
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for evaporator +  
adder for line set.  
Models 12-48 require start kits for TXV matches.  
Johnson Controls Unitary Products  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
COOLING CAPACITY - With Air Handler Coils  
AIR HANDLER  
COOLING  
NET MBH  
UNIT  
MODEL  
COIL  
RATED  
CFM  
MODEL1  
MODEL  
W
SEER  
EER  
TOTAL  
SENS.  
13 SEER AC WITH MA  
TCGD18S41S1(H)  
TCGD24S41S1(H)  
MA08B  
MA08B  
MA08B  
MA08B  
MA12B  
MA12B  
MA12B  
MA14D  
MA16C  
MA14D  
MA16C  
MA16C  
MA20D  
MA16C  
MA20D  
MA20D  
MA20D  
17  
17  
17  
17  
17  
17  
17  
24  
21  
24  
21  
21  
24  
21  
24  
24  
24  
FC/MC18B  
FC/MC36B  
FC/MC35B  
FC/MC43B  
FC/MC35B  
FC/MC43B  
FC/MC43B  
FC/MC48D  
FC/MC43C  
FC/MC48D  
FC/MC48C  
FC/MC48C  
FC/MC48D  
FC60C  
600  
800  
17.5  
24.0  
24.0  
24.0  
29.0  
29.0  
35.0  
35.0  
42.0  
42.0  
42.0  
48.0  
48.0  
48.0  
48.0  
57.0  
57.0  
12.9  
16.7  
16.7  
16.7  
21.0  
21.0  
24.8  
24.8  
29.2  
29.2  
29.2  
34.4  
34.4  
34.4  
34.4  
38.5  
38.5  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
800  
800  
1000  
1000  
1200  
1200  
1400  
1400  
1400  
1600  
1600  
1600  
1600  
1800  
1800  
TCGD30S41S1(H)  
TCGD36S41S1(H)  
TCGD42S41S1(H)  
TCGD48S41S1(H)  
TCGD60S41S1  
FC/MC60D  
FC/MC60D  
FC/MC62D  
13 SEER AC WITH MV - VARIABLE SPEED  
TCGD18S41S1(H)  
TCGD24S41S1(H)  
MV12B  
MV12B  
MV12B  
MV12B  
MV12B  
MV16C  
MV12B  
MV16C  
MV16C  
MV16C  
MV20D  
MV12D  
MV16C  
MV16C  
MV20D  
MV16C  
MV20D  
MV20D  
MV20D  
MV20D  
17  
17  
17  
17  
17  
21  
17  
21  
21  
21  
24  
24  
21  
21  
24  
21  
24  
24  
24  
24  
FC/MC18B  
FC/MC36B  
FC/MC35B  
FC/MC43B  
FC/MC35B  
FC/MC35C  
FC/MC43B  
FC/MC43C  
FC/MC43C  
FC/MC48C  
FC/MC48D  
FC/MC48D  
FC/MC43C  
FC/MC48C  
FC/MC48D  
FC/MC48C  
FC/MC48D  
FC/MC60D  
FC/MC60D  
FC/MC62D  
600  
800  
17.5  
24.0  
24.0  
24.0  
29.0  
30.0  
29.0  
30.0  
36.0  
36.0  
36.0  
35.0  
42.0  
42.0  
42.0  
48.0  
48.0  
48.0  
57.0  
57.0  
13.3  
17.4  
17.4  
17.3  
21.6  
21.6  
21.6  
21.6  
25.4  
25.4  
25.6  
25.4  
30.0  
30.0  
30.0  
35.0  
35.0  
35.0  
38.5  
38.5  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
13.50  
13.50  
14.00  
13.50  
13.50  
13.50  
13.00  
13.00  
12.50  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
11.00  
11.00  
800  
800  
1000  
1000  
1000  
1000  
1200  
1200  
1200  
1135  
1400  
1400  
1400  
1600  
1600  
1600  
1800  
1800  
TCGD30S41S1(H)  
TCGD36S41S1(H)  
TCGD42S41S1(H)  
TCGD48S41S1(H)  
TCGD60S41S1  
13 SEER AC WITH AV / SV / F*FV - VARIABLE SPEED  
TCGD18S41S1(H)  
TCGD24S41S1(H)  
TCGD30S41S1(H)  
TCGD36S41S1(H)  
AV*24  
AV*36  
17  
21  
21  
21  
24  
24  
24  
24  
24  
24  
24  
–
–
–
–
–
–
–
–
–
–
–
610  
725  
18.0  
24.0  
30.0  
35.0  
42.0  
42.0  
48.0  
48.0  
47.0  
57.0  
56.5  
13.5  
17.4  
21.8  
25.2  
29.8  
29.8  
35.0  
35.0  
34.6  
39.0  
38.5  
14.50  
14.50  
14.50  
13.50  
14.00  
14.00  
13.50  
13.50  
13.40  
13.50  
13.00  
12.00  
12.00  
12.00  
11.50  
12.00  
12.00  
11.50  
11.50  
11.30  
11.50  
11.00  
AV*36  
960  
AV*36  
1190  
1385  
1360  
1625  
1560  
1600  
1730  
1780  
AV/SV*48  
AV/SV*60  
AV/SV*48  
AV/SV*60  
F4FV060  
AV/SV*60  
F4FV060  
TCGD42S41S1(H)  
TCGD48S41S1(H)  
TCGD60S41S1  
For Notes See Page 5.  
4
Johnson Controls Unitary Products  
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
COOLING CAPACITY - With Air Handler Coils (Continued)  
AIR HANDLER  
COOLING  
NET MBH  
UNIT  
MODEL  
COIL  
RATED  
CFM  
MODEL1  
MODEL  
W
SEER  
EER  
TOTAL  
SENS.  
13 SEER AC WITH AHP / SHP / AHX / F*FP  
AHP18  
AHX18  
17  
17  
18  
17  
17  
17  
21  
21.5  
17  
21  
17  
21  
17  
21  
18  
17  
21  
21  
21  
21  
21  
24  
21  
21  
21  
24  
21  
24  
24  
24  
24  
24  
24  
24  
24  
24  
24  
24  
–
-
650  
630  
17.5  
18.0  
17.5  
17.8  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
29.0  
29.0  
29.4  
30.0  
29.0  
29.2  
29.4  
35.0  
35.0  
35.2  
35.4  
35.0  
35.8  
41.0  
42.0  
41.0  
42.0  
41.5  
48.0  
48.0  
48.0  
48.0  
48.0  
47.0  
57.0  
58.5  
57.0  
57.5  
12.9  
13.8  
12.9  
13.3  
16.8  
16.9  
16.9  
16.7  
16.8  
17.0  
21.0  
21.0  
22.2  
22.3  
21.0  
21.6  
21.4  
24.8  
24.8  
25.0  
25.2  
24.8  
25.8  
29.2  
29.9  
29.2  
30.1  
29.4  
34.4  
35.0  
35.4  
34.4  
34.4  
34.8  
38.5  
40.0  
38.5  
39.0  
13.00  
14.50  
13.00  
14.50  
13.00  
14.50  
14.50  
13.00  
14.00  
14.00  
13.00  
13.00  
14.00  
14.50  
13.00  
13.50  
14.00  
13.00  
13.00  
13.50  
14.00  
13.00  
13.50  
13.00  
14.50  
13.00  
14.00  
13.50  
13.00  
13.50  
13.50  
13.00  
13.00  
13.00  
13.00  
13.50  
13.00  
13.50  
11.00  
12.00  
11.00  
12.00  
11.00  
12.00  
12.00  
11.00  
11.80  
12.00  
11.00  
11.00  
11.75  
12.00  
11.00  
11.40  
12.00  
11.00  
11.00  
11.50  
11.80  
11.00  
11.50  
11.00  
12.00  
11.00  
11.75  
11.70  
11.00  
11.00  
11.50  
11.00  
11.00  
11.30  
11.00  
11.50  
11.00  
11.50  
TCGD18S41S1(H)  
TCGD24S41S1(H)  
F4FP024  
F6FP018  
AHP30  
–
-
600  
600  
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
795  
AHX30  
820  
AHX36  
815  
F4FP036  
F6FP030  
F6FP036  
AHP30  
800  
850  
855  
1015  
1040  
1025  
1005  
1050  
1035  
980  
AHP36  
AHX30  
TCGD30S41S1(H)  
AHX36  
F4FP040  
F6FP030  
F6FP036  
AHP36  
1235  
1255  
1225  
1190  
1235  
1290  
1485  
1395  
1455  
1455  
1380  
1675  
1600  
1660  
1600  
1600  
1625  
1850  
1905  
1900  
1710  
AHP42  
AHX36  
TCGD36S41S1(H)  
TCGD42S41S1(H)  
AHX42  
F5FP048  
F6FP042  
AHP42  
AHX42  
F5FP048  
F6FP042  
F6FP048  
AHP/SHP48  
AHP/SHP60  
AHX48  
TCGD48S41S1(H)  
TCGD60S41S1  
F5FP048  
F5FP060  
F6FP048  
AHP/SHP60  
AHX60  
F5FP060  
F6FP060  
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210.  
Cooling MBH based on 8°F entering air temperature, 50% RH, and rated air flow.  
EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.  
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power  
input in watt-hours during the same period.  
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.  
— = Not applicable.  
Johnson Controls Unitary Products  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils  
FURNACE**  
COOLING  
NET MBH  
COIL  
MODEL  
UNIT MODEL  
CFM RANGE  
(Min.-max.)  
RATED  
CFM  
W
SEER1  
EER  
TOTAL  
17.5  
17.5  
17.5  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
29.0  
29.0  
29.0  
29.0  
29.0  
29.0  
35.0  
35.0  
35.0  
35.0  
35.0  
42.0  
42.0  
42.0  
42.0  
48.0  
48.0  
48.0  
48.0  
48.0  
57.0  
57.0  
57.0  
57.0  
SENS.  
12.9  
12.9  
12.9  
16.7  
16.7  
16.7  
16.7  
16.7  
16.7  
16.7  
16.7  
16.7  
21.0  
21.0  
21.0  
21.0  
21.0  
21.0  
24.8  
24.8  
24.8  
24.8  
24.8  
29.2  
29.2  
29.2  
29.2  
34.4  
34.4  
34.4  
34.4  
34.4  
38.5  
38.5  
38.5  
38.5  
450 - 750  
450 - 750  
14,17  
14  
FC/MC/PC18  
HC18  
600  
600  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
TCGD18S41S1(H)  
450 - 750  
14,17  
14  
UC18  
600  
600 - 1000  
600 - 1000  
600 - 1000  
600 - 1000  
600 - 1000  
600 - 1000  
600 - 1000  
600 - 1000  
600 - 1000  
800 - 1200  
800 - 1200  
800 - 1200  
800 - 1200  
800 - 1200  
800 - 1200  
1000 - 1400  
1000 - 1400  
1000 - 1400  
1000 - 1400  
1000 - 1400  
1200 - 1600  
1200 - 1600  
1200 - 1600  
1200 - 1600  
1400 - 1800  
1400 - 1800  
1400 - 1800  
1400 - 1800  
1400 - 1800  
1600 - 2000  
1600 - 2000  
1600 - 2000  
1600 - 2000  
FC/MC/PC32  
FC/MC/PC35  
FC/MC/PC36  
FC/MC/PC37  
FC/MC/PC43  
HC30  
800  
17,21  
14,17,21  
14  
800  
800  
800  
TCGD24S41S1(H)  
17,21  
14  
800  
800  
17  
HC36  
800  
21  
HC42  
800  
14,17,21  
14  
UC36  
800  
FC/MC/PC32  
FC/MC/PC35  
FC/MC/PC37  
FC/MC/PC43  
HC36  
1000  
1000  
1000  
1000  
1000  
1000  
1200  
1200  
1200  
1200  
1200  
1400  
1400  
1400  
1400  
1600  
1600  
1600  
1600  
1600  
1800  
1800  
1800  
1800  
17,21  
14  
TCGD30S41S1(H)  
17,21  
17  
21  
HC42  
14  
FC/MC/PC37  
FC/MC/PC43  
FC/MC/PC48  
HC42  
17,21  
21,24  
21  
TCGD36S41S1(H)  
TCGD42S41S1(H)  
TCGD48S41S1(H)  
TCGD60S41S1  
21,24  
17,21  
21,24  
21  
UC48  
FC/MC/PC43  
FC/MC/PC48  
HC42  
21,24  
21,24  
21,24  
24  
UC48  
FC/MC/PC48  
FC/MC/PC60  
HC60  
21,24  
21,24  
21,24  
24  
UC48  
UC60  
FC/MC/PC60  
FC/MC62  
HC60  
24  
21,24  
UC60  
1. Requires a 2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.  
** Refer to Quick Selection Chart for specific furnace match-up.  
6
Johnson Controls Unitary Products  
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
COOLING CAPACITY - With High Efficiency Motor Furnaces  
COOLING  
Net MBH  
FURNACE  
MODEL  
COIL  
MODELS  
W
RATED  
CFM  
MODEL1  
SEER  
EER  
TOTAL  
SENS.  
13 SEER HP WITH VARIABLE SPEED FURNACES2  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*9X*B12  
FC/MC/PC18A  
FC/MC/PC18B  
FC/MC/PC18B  
UC18A  
14  
17  
17  
14  
17  
17  
14  
17  
17  
14  
14  
17  
17  
14  
17  
21  
21  
14  
17  
17  
21  
21  
14  
17  
14  
17  
17  
14  
17  
17  
14  
17  
17  
14  
17  
17  
14  
17  
17  
14  
17  
21  
21  
17  
21  
14  
17  
21  
21  
17  
21  
540  
580  
590  
590  
595  
590  
620  
580  
610  
620  
620  
580  
610  
800  
850  
715  
825  
815  
835  
775  
770  
810  
840  
865  
775  
760  
815  
805  
765  
815  
805  
760  
800  
775  
760  
815  
805  
765  
815  
970  
1120  
1105  
850  
1085  
1075  
1105  
1125  
710  
870  
1095  
1055  
17.7  
18.0  
18.0  
18.0  
18.0  
18.0  
17.5  
17.5  
17.5  
17.5  
17.5  
17.5  
17.5  
24.0  
24.0  
23.8  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
24.0  
23.8  
24.0  
24.0  
23.6  
23.6  
23.6  
29.2  
30.0  
30.0  
28.8  
29.8  
29.8  
30.0  
30.0  
28.2  
29.6  
30.0  
30.0  
12.9  
13.4  
13.4  
13.4  
13.4  
13.4  
12.7  
12.6  
12.8  
12.8  
12.7  
12.5  
12.6  
16.9  
17.0  
16.3  
17.0  
16.8  
16.8  
16.8  
16.8  
16.8  
17.0  
17.0  
17.0  
16.8  
17.1  
16.9  
17.0  
16.9  
17.0  
16.9  
17.0  
16.8  
16.8  
17.2  
16.6  
16.7  
16.7  
21.4  
22.8  
22.8  
20.6  
22.8  
22.4  
22.9  
22.9  
19.3  
21.2  
22.9  
22.9  
14.50  
14.50  
14.50  
14.50  
14.50  
14.50  
14.50  
14.50  
14.50  
14.50  
14.50  
14.50  
14.50  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
13.80  
14.00  
14.00  
13.80  
14.00  
13.80  
13.20  
14.00  
14.00  
14.00  
14.00  
14.00  
13.80  
14.00  
14.00  
14.00  
13.80  
14.00  
12.50  
12.50  
12.50  
12.00  
12.00  
12.00  
12.50  
12.00  
12.50  
12.00  
12.00  
12.00  
12.50  
11.50  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
11.50  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
12.00  
11.50  
12.00  
12.00  
11.50  
11.50  
11.50  
11.00  
11.50  
12.00  
12.00  
12.00  
12.00  
11.50  
12.00  
12.00  
12.00  
11.50  
12.00  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*9X*B12  
UC18B  
UC18B  
TCGD18S41S1(H)  
T*(8,L)C*A12  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)C*A12  
T*(8,L)C*A12  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*9X*C16  
FC/MC/PC18A  
FC/MC/PC18B  
FC/MC/PC18B  
HC18  
UC18A  
UC18B  
UC18B  
FC/MC/PC32A  
FC/MC/PC35B  
FC/MC/PC35C  
FC/MC/PC35C  
FC/MC/PC36A  
FC/MC/PC36B  
FC/MC/PC36B  
FC/MC/PC36C  
FC/MC/PC36C  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC32A  
FC/MC/PC35B  
FC/MC/PC35B  
FC/MC/PC36A  
FC/MC/PC36B  
FC/MC/PC36B  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC43B  
HC30  
T*9X*C20  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*9X*B12  
T*9X*C16  
T*9X*C20  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)C*A12  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)C*A12  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)C*A12  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)C*A12  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)C*A12  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
TCGD24S41S1(H)  
HC36  
HC36  
UC36A  
UC36B  
UC36B  
FC/MC/PC32A  
FC/MC/PC35B  
FC/MC/PC35C  
FC/MC/PC35C  
FC/MC/PC35B  
FC/MC/PC35C  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43B  
FC/MC/PC43C  
T*9X*C16  
TCGD30S41S1(H)  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
T*9X*C16  
For Notes See Page 10.  
Johnson Controls Unitary Products  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)  
COOLING  
Net MBH  
FURNACE  
MODEL  
COIL  
MODELS  
W
RATED  
CFM  
MODEL1  
SEER  
EER  
TOTAL  
SENS.  
13 SEER HP WITH VARIABLE SPEED FURNACES2  
T*9X*C20  
T*(8,L)C*A12  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)C*A12  
T*(8,L)C*B12  
FC/MC/PC43C  
FC/MC/PC32A  
FC/MC/PC35B  
FC/MC/PC35B  
FC/MC/PC35C  
FC/MC/PC35C  
FC/MC/PC35C  
FC/MC/PC35C  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43C  
HC36  
21  
14  
17  
17  
21  
21  
21  
21  
14  
17  
17  
21  
21  
21  
21  
17  
17  
21  
21  
21  
21  
14  
17  
21  
21  
17  
21  
21  
21  
21  
21  
21  
24  
21  
21  
21  
21  
24  
14  
17  
17  
21  
21  
21  
21  
21  
21  
21  
21  
24  
21  
720  
1045  
995  
28.2  
29.2  
29.6  
29.4  
29.6  
30.0  
29.6  
29.6  
29.8  
30.0  
30.0  
30.0  
30.0  
30.0  
30.0  
29.6  
29.4  
30.0  
30.0  
30.0  
30.0  
35.2  
35.2  
35.2  
35.6  
35.2  
35.4  
35.0  
35.6  
35.8  
35.8  
35.4  
35.4  
34.2  
34.8  
34.6  
34.0  
34.0  
33.8  
35.2  
35.2  
35.6  
35.6  
35.4  
35.6  
36.0  
36.0  
36.0  
36.0  
36.0  
35.6  
19.3  
21.8  
21.4  
22.0  
22.0  
22.4  
22.0  
22.0  
21.8  
22.0  
22.0  
22.1  
22.1  
22.0  
22.1  
21.4  
22.0  
22.1  
22.1  
22.0  
22.1  
25.4  
25.4  
24.8  
25.6  
25.4  
25.4  
24.6  
25.2  
25.8  
25.8  
25.0  
25.0  
24.8  
25.4  
24.8  
24.6  
24.6  
23.0  
25.2  
25.2  
25.4  
25.4  
25.2  
25.4  
26.0  
26.1  
26.0  
26.5  
26.2  
25.4  
14.00  
13.20  
14.00  
13.50  
14.00  
14.00  
14.00  
14.00  
13.80  
14.00  
13.80  
14.00  
14.00  
14.00  
14.00  
14.00  
13.70  
14.00  
14.00  
14.00  
14.00  
13.30  
13.30  
14.00  
13.80  
13.25  
13.45  
13.55  
14.00  
14.00  
13.70  
13.70  
13.70  
13.50  
13.50  
13.15  
13.25  
13.30  
13.50  
13.50  
13.50  
14.00  
14.00  
13.50  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
14.00  
12.00  
11.00  
11.50  
11.50  
12.00  
12.00  
12.00  
12.00  
11.50  
12.00  
11.50  
12.00  
12.00  
12.00  
12.00  
11.50  
11.50  
12.00  
12.00  
12.00  
12.00  
11.25  
11.25  
11.50  
11.70  
11.25  
11.40  
11.40  
11.50  
11.50  
11.50  
11.50  
11.50  
11.50  
11.50  
11.20  
11.20  
11.25  
11.00  
11.00  
11.00  
11.50  
12.00  
11.50  
11.50  
12.00  
12.00  
11.50  
11.50  
12.00  
11.50  
1045  
1025  
1080  
1005  
985  
980  
990  
TCGD30S41S1(H) (T*9C/T*9V)*B12  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
1035  
990  
1000  
1030  
995  
995  
HC36  
1045  
990  
HC42  
HC42  
1000  
1030  
995  
HC42  
HC42  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
UC48C  
1290  
1300  
1175  
1250  
1270  
1260  
1185  
1185  
1270  
1280  
1205  
1240  
1185  
1300  
1280  
1205  
1240  
980  
T*9X*C16  
T*9X*C20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
T*9X*C20  
T*9X*D20  
T*(8,L)X*C16  
T*(8,L)X*C20  
UC48C  
T*9X*C16  
TCGD36S41S1(H)  
UC48C  
T*9X*C20  
UC48C  
T*9X*D20  
T*(8,L)C*A12  
UC48D  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
HC42  
T*(8,L)C*B12  
1210  
1200  
1205  
1190  
1240  
1200  
1210  
1155  
1195  
1330  
1240  
1205  
(T*9C/T*9V)*B12  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
T*(8,L)C*C16  
For Notes See Page 10.  
8
Johnson Controls Unitary Products  
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)  
COOLING  
Net MBH  
FURNACE  
MODEL  
COIL  
MODELS  
W
RATED  
CFM  
MODEL1  
SEER  
EER  
TOTAL  
SENS.  
13 SEER HP WITH VARIABLE SPEED FURNACES2  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
HC42  
HC42  
21  
21  
21  
21  
21  
21  
21  
24  
17  
21  
21  
17  
21  
21  
21  
21  
21  
21  
24  
21  
21  
21  
21  
24  
21  
21  
21  
21  
21  
21  
21  
21  
24  
21  
21  
21  
21  
21  
21  
21  
21  
24  
1190  
1240  
1200  
1210  
1155  
1195  
1305  
1240  
1300  
1475  
1415  
1270  
1410  
1400  
1360  
1475  
1425  
1420  
1435  
1400  
1515  
1425  
1420  
1435  
1425  
1450  
1360  
1395  
1435  
1410  
1395  
1430  
1450  
1425  
1450  
1360  
1395  
1435  
1410  
1395  
1430  
1450  
35.6  
35.4  
35.6  
34.6  
34.8  
34.6  
35.0  
34.8  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
41.5  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
41.5  
41.5  
41.5  
41.5  
41.5  
25.6  
25.2  
25.4  
24.8  
24.8  
24.8  
25.6  
25.0  
29.0  
29.9  
29.5  
29.0  
29.6  
29.6  
29.5  
30.1  
29.3  
29.3  
29.7  
29.4  
30.0  
29.2  
29.4  
29.4  
30.0  
30.4  
29.6  
29.6  
30.1  
30.1  
30.3  
30.3  
29.9  
30.0  
30.0  
30.0  
30.0  
30.2  
30.2  
30.2  
30.0  
30.2  
14.00  
13.50  
14.00  
13.50  
14.00  
13.50  
13.30  
13.80  
13.50  
13.50  
13.50  
13.50  
13.30  
13.50  
13.80  
14.00  
13.50  
13.50  
13.50  
13.50  
13.50  
13.30  
13.20  
13.40  
13.50  
13.50  
13.30  
13.50  
13.80  
14.00  
13.50  
13.50  
13.80  
13.50  
13.50  
13.40  
13.50  
13.50  
13.50  
13.30  
13.20  
13.40  
12.00  
11.50  
11.50  
11.50  
11.50  
11.50  
11.00  
11.50  
11.50  
11.50  
11.50  
11.50  
11.00  
11.00  
11.50  
11.50  
11.50  
11.50  
11.50  
11.00  
11.00  
11.00  
11.00  
11.00  
11.50  
11.50  
11.00  
11.00  
11.50  
11.50  
11.50  
11.50  
11.50  
11.50  
11.50  
11.00  
11.00  
11.00  
11.50  
11.00  
11.00  
11.00  
HC42  
UC48C  
TCGD36S41S1(H)  
UC48C  
UC48C  
UC48C  
UC48D  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
UC48C  
T*9X*C16  
T*9X*C20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
T*9X*C20  
T*9X*D20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
UC48C  
UC48C  
T*9X*C20  
UC48C  
T*9X*D20  
UC48D  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
HC42  
TCGD42S41S1(H)  
HC42  
HC42  
HC42  
UC48C  
UC48C  
UC48C  
UC48C  
UC48D  
For Notes See Page 10.  
Johnson Controls Unitary Products  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)  
COOLING  
Net MBH  
FURNACE  
MODEL  
COIL  
MODELS  
W
RATED  
CFM  
MODEL1  
SEER  
EER  
TOTAL  
SENS.  
13 SEER HP WITH VARIABLE SPEED FURNACES2  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
FC/PC60C  
FC/MC/PC60D  
FC/PC60C  
FC/PC60C  
FC/MC/PC60D  
FC/PC60C  
FC/PC60C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
FC/MC/PC60D  
FC/PC60C  
FC/PC60C  
FC/PC60C  
FC/PC60C  
FC/PC60C  
FC/MC/PC60D  
FC/PC60C  
FC/PC60C  
FC/MC/PC60D  
FC/MC/PC60D  
FC/MC62D  
UC60C  
21  
21  
21  
21  
24  
21  
21  
21  
21  
24  
21  
21  
21  
21  
21  
21  
24  
24  
21  
21  
21  
21  
21  
21  
21  
21  
24  
21  
21  
21  
21  
21  
21  
24  
21  
21  
24  
21  
21  
24  
21  
21  
24  
21  
21  
24  
1600  
1660  
1565  
1615  
1635  
1605  
1595  
1575  
1625  
1490  
1575  
1625  
1615  
1640  
1590  
1655  
1645  
1615  
1625  
1605  
1590  
1655  
1605  
1690  
1575  
1560  
1630  
1645  
1665  
1640  
1735  
1575  
1560  
1630  
1735  
1645  
1615  
1615  
1655  
1630  
1605  
1655  
1615  
1605  
1655  
1615  
48.0  
48.0  
48.0  
48.0  
48.0  
48.0  
48.0  
48.0  
47.0  
47.5  
47.0  
47.0  
48.0  
48.0  
48.0  
48.0  
48.0  
48.0  
48.0  
48.0  
48.0  
48.0  
56.5  
57.0  
56.0  
56.0  
56.5  
56.5  
57.0  
56.0  
56.5  
56.0  
56.0  
56.0  
56.5  
56.0  
55.5  
56.5  
56.0  
56.0  
55.5  
55.0  
53.5  
54.0  
53.5  
53.5  
34.4  
34.4  
34.8  
34.4  
34.8  
34.6  
34.8  
34.6  
34.6  
33.8  
33.8  
33.8  
34.4  
34.8  
34.6  
34.8  
35.2  
35.0  
35.2  
35.0  
35.2  
35.2  
37.8  
37.8  
37.8  
37.8  
37.8  
37.8  
37.8  
37.2  
38.5  
37.2  
37.2  
37.2  
38.5  
37.2  
36.8  
37.4  
37.2  
37.4  
37.0  
36.8  
35.8  
35.2  
35.0  
35.0  
13.30  
13.20  
13.10  
13.20  
13.20  
13.30  
13.30  
13.30  
13.40  
13.20  
13.10  
13.10  
13.30  
13.20  
13.10  
13.20  
13.20  
13.20  
13.30  
13.50  
13.10  
13.10  
13.50  
13.50  
13.30  
13.30  
13.30  
13.30  
13.50  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.30  
13.50  
13.20  
13.30  
13.50  
13.30  
13.00  
13.00  
13.00  
13.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.50  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
10.90  
11.00  
10.80  
10.90  
T*9X*C20  
T*9X*D20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
T*9X*C20  
T*9X*D20  
T*9X*C16  
TCGD48S41S1(H)  
T*9X*C20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
(T*9C/T*9V)*D20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
T*9X*C20  
T*9X*D20  
T*9X*C20  
T*(8,L)X*C20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
UC60D  
FC/PC60C  
FC/PC60C  
UC60D  
T*9X*C20  
T*9X*D20  
TCGD60S41S1  
T*(8,L)X*C20  
T*9X*C20  
UC60D  
UC60D  
(T*9C/T*9V)*D20  
T*(8,L)C*C20  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
T*(8,L)C*C20  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
T*(8,L)C*C20  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
FC/MC/PC60D  
FC/MC62D  
FC/MC62D  
FC/MC62D  
FC/PC60C  
FC/PC60C  
HC60  
UC60C  
UC60C  
UC60D  
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.  
2. Variable speed furnaces have B.O.D (Blower on Delay) standard.  
10  
Johnson Controls Unitary Products  
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
Thermostats - Compatible thermostat controls are available  
through accessory sourcing. For optimum performance and  
installation, refer to the UPGNET “Low Voltage Wiring Diagram”  
document to select and apply controls.  
ACCESSORIES  
Refer to Price Manual for specific model numbers.  
Off Cycle Timer Delay - Provides a 5-minute off cycle to pre-  
vent rapid recycling of the compressor.  
Hard Start Kit - Required when using TXV indoor coil. Also,  
provides increased starting torque for areas with low voltage.  
SOUND POWER RATINGS*  
UNIT MODEL  
(dBA)  
75  
18  
24  
30  
36  
42  
48  
60  
Model  
18  
Source 1 Kit numbers  
S1-2SA06708606  
S1-2SA06721706  
S1-2SA06705906  
S1-2SA06708906  
S1-2SA06708806  
S1-2SA06708806  
S1-2SA06707906  
76  
76  
24  
76  
30  
76  
36  
77  
42  
78  
48  
* Rated in accordance with ARI 270-95 Standards.  
60  
TYPICAL INSTALLATION  
MINIMUM 18” SERVICE  
ACCESS CLEARANCE  
ON ONE SIDE  
THERMOSTAT  
60” OVERHEAD  
CLEARANCE  
WEATHERPROOF  
DISCONNECT  
SWITCH  
NEC CLASS 1 WIRING  
6” CLEARANCE  
TO FURNACE OR  
AIR HANDLER  
AROUND PERIMETER  
TERMINAL BLOCK  
NEC CLASS 2 WIRING  
TO INDOOR COIL  
NOTE:  
ALL OUTDOOR WIRING  
CONTROL  
ACCESS  
PANEL  
MUST BE WEATHERPROOF.  
SEAL OPENING(S) WITH  
PERMAGUM OR EQUIVALENT  
TYPICAL FIELD WIRING  
ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES  
POWER WIRING  
CONTROL WIRING  
FACTORY WIRING  
POWER WIRING  
208/230-1-60  
24 VOLT CONTROL WIRING  
MINIMUM 18 GA. WIRE  
(NEC CLASS 2)  
FURNACE OR AIR HANDLER TERMINAL BLOCK  
Y R G W  
C
*
TERMINAL W IS ONLY  
REQUIRED ON SYSTEMS  
WITH HEAT.  
CONTACTOR  
TERMINALS  
GND.  
LUG  
*
COIL  
R
Y
G
W
ROOM THERMOSTAT  
CONDENSING UNIT  
ALL OUTDOOR WIRING MUST BE WEATHERPROOF. USE COPPER CONDUCTORS ONLY.  
Johnson Controls Unitary Products  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
COOLING PERFORMANCE DATA  
AIR CONDITIONER MODEL NO.  
TCGD18S41S1(H)  
INDOOR COIL MODEL NO.  
FC/MC/PC18  
IDCFM  
450  
75  
600  
75  
750  
75  
CONDENSING  
ENTERING AIR  
TEMPERATURE  
ID DB (°F)  
ID WB (°F)  
T.C.  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
62  
62  
62  
15.7 17.8 17.7 19.3 19.9 16.9 18.4 18.0 19.5 20.2 18.0 18.9 18.4 19.6 20.4  
16.0 13.8 12.1 12.0 9.3 17.3 15.9 13.5 13.0 9.8 18.5 17.9 14.9 13.9 10.4  
65  
75  
S.C.  
KW  
1.0  
15.0 16.8 16.6 18.4 19.2 16.2 17.5 17.1 18.6 19.4 17.4 18.2 17.5 18.8 19.6  
15.3 13.6 11.7 11.6 8.9 16.6 15.6 13.2 12.8 9.6 17.9 17.6 14.7 13.9 10.3  
1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1  
14.2 15.8 15.6 17.4 18.5 15.5 16.6 16.1 17.7 18.6 16.8 17.4 16.7 18.1 18.8  
14.5 13.4 11.2 11.2 8.6 15.9 15.3 12.8 12.6 9.4 17.2 17.2 14.4 13.9 10.1  
1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2  
0.9  
0.9  
0.9  
0.9  
0.9  
0.9  
0.9  
0.9  
0.9  
0.9  
0.9  
0.9  
0.9  
0.9  
T.C.  
S.C.  
KW  
T.C.  
85  
S.C.  
KW  
T.C.  
13.5 14.8 14.6 16.4 17.7 14.8 15.7 15.2 17.5 17.9 16.1 16.6 15.8 17.3 18.0  
13.8 13.1 10.8 10.7 8.2 15.2 15.0 12.5 12.4 9.1 16.6 16.9 14.2 14.0 10.0  
95  
S.C.  
KW  
1.3  
12.6 13.7 13.2 15.1 16.5 13.8 14.6 13.8 15.5 16.7 15.0 15.5 14.4 16.0 16.8  
12.8 12.5 10.2 10.3 7.9 14.1 14.1 11.8 11.9 8.8 15.4 15.7 13.4 13.6 9.8  
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5  
11.6 12.6 11.8 13.8 15.4 12.7 13.5 12.5 14.2 15.5 13.8 14.5 13.1 14.6 15.6  
1.3  
1.3  
1.3  
1.3  
1.3  
1.3  
1.3  
1.3  
1.3  
1.3  
1.3  
1.3  
1.3  
1.3  
T.C.  
105  
115  
125  
S.C.  
KW  
T.C.  
S.C.  
KW  
11.9 11.9  
1.6 1.6  
9.6  
1.6  
9.8  
1.6  
7.6 13.1 13.2 11.2 11.6  
1.6 1.6 1.6 1.6 1.6  
8.6 14.3 14.6 12.7 13.3 9.6  
1.6 1.6 1.6 1.6 1.6 1.6  
T.C.  
10.7 11.4 10.5 12.5 14.2 11.7 12.4 11.2 12.9 14.3 12.7 13.4 11.8 13.3 14.4  
S.C.  
KW  
11.0 11.2  
1.8 1.8  
9.0  
1.8  
9.4  
1.8  
7.3 12.1 12.3 10.5 11.2  
1.8 1.8 1.8 1.8 1.8  
8.3 13.1 13.5 12.0 12.9 9.4  
1.8 1.8 1.8 1.8 1.8 1.8  
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.  
Multipliers for determining the performance with other indoor sections.  
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed  
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.  
Air Handlers  
–
Coils  
T.C.  
1.00  
1.00  
1.00  
1.03  
1.03  
1.02  
1.00  
1.00  
1.02  
S.C.  
1.00  
1.00  
1.00  
1.07  
1.05  
1.03  
1.00  
1.00  
1.03  
KW  
1.00  
1.00  
1.00  
0.94  
0.94  
0.89  
1.00  
1.00  
0.93  
Furnaces  
Coils  
T.C.  
1.01  
1.03  
1.03  
1.03  
1.03  
1.03  
1.03  
1.01  
1.02  
1.02  
1.03  
1.02  
1.03  
S.C.  
1.00  
1.04  
1.04  
1.04  
1.04  
1.04  
1.04  
1.02  
1.05  
1.05  
1.05  
1.03  
1.05  
KW  
0.89  
0.91  
0.91  
0.94  
0.94  
0.94  
0.91  
0.89  
0.89  
0.90  
0.91  
0.89  
0.89  
HC18  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*9X*B12  
FC/MC/PC18A  
FC/MC/PC18B  
FC/MC/PC18B  
UC18A  
–
UC18  
AHP18  
AHX18  
AV*24  
–
–
T*(8,L)X*A12  
T*(8,L)X*B12  
T*9X*B12  
–
UC18B  
MV12B  
MA08B  
F4FP024  
F6FP018  
FC/MC18B  
UC18B  
FC/MC18B  
T*(8,L)C*A12  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)C*A12  
T*(8,L)C*A12  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
FC/MC/PC18A  
FC/MC/PC18B  
FC/MC/PC18B  
HC18  
–
–
UC18A  
UC18B  
UC18B  
12  
Johnson Controls Unitary Products  
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
COOLING PERFORMANCE DATA  
AIR CONDITIONER MODEL NO.  
TCGD24S41S1(H)  
INDOOR COIL MODEL NO.  
FC/MC/PC36  
IDCFM  
600  
75  
800  
75  
1000  
CONDENSING  
ENTERING AIR  
TEMPERATURE  
ID DB (°F)  
ID WB (°F)  
T.C.  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
75  
62  
80  
67  
80  
72  
62  
62  
22.0 27.4 27.3 29.1 30.3 24.3 28.8 28.6 30.4 31.7 26.6 30.1 29.8 31.8 33.2  
22.0 19.9 17.3 17.0 13.8 24.2 22.9 19.6 18.8 14.8 26.4 26.0 22.0 20.6 15.7  
65  
75  
S.C.  
KW  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
T.C.  
20.5 25.3 25.1 27.4 29.3 23.0 26.9 26.6 28.9 30.7 25.5 28.4 28.0 30.4 32.2  
20.5 19.3 16.4 16.5 13.4 22.8 22.1 18.8 18.4 14.4 25.1 24.9 21.3 20.3 15.5  
S.C.  
KW  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
T.C.  
19.0 23.2 23.0 25.8 28.3 21.7 25.0 24.6 27.4 29.7 24.4 26.7 26.1 28.9 31.2  
19.0 18.6 15.6 15.9 12.9 21.4 21.2 18.1 18.0 14.1 23.9 23.7 20.5 20.0 15.3  
85  
S.C.  
KW  
1.7  
1.7  
1.7  
1.7  
1.8  
1.7  
1.7  
1.7  
1.8  
1.8  
1.7  
1.7  
1.7  
1.8  
1.8  
T.C.  
17.5 21.1 20.8 23.8 27.2 20.4 23.1 22.5 24.0 28.7 23.3 25.0 24.3 27.5 30.1  
17.5 18.0 14.7 15.4 12.4 20.0 20.3 17.3 16.8 13.7 22.6 22.6 19.8 19.7 15.1  
95  
S.C.  
KW  
1.8  
1.8  
1.8  
1.9  
1.9  
1.9  
1.9  
1.9  
1.9  
1.9  
1.9  
1.9  
1.9  
1.9  
2.0  
T.C.  
16.2 19.0 18.4 21.7 24.8 18.7 21.0 20.2 23.3 26.3 21.3 22.9 22.0 24.9 27.7  
16.1 16.6 13.7 14.4 11.6 18.4 18.6 15.9 16.6 13.0 20.6 20.6 18.2 18.8 14.5  
105  
115  
125  
S.C.  
KW  
2.0  
2.0  
2.0  
2.0  
2.1  
2.0  
2.0  
2.0  
2.0  
2.1  
2.0  
2.0  
2.0  
2.1  
2.1  
T.C.  
14.8 17.0 16.1 19.3 22.5 17.1 18.9 17.9 20.8 23.9 19.4 20.9 19.7 22.3 25.4  
14.8 15.3 12.7 13.5 10.8 16.8 17.0 14.6 15.7 12.4 18.7 18.7 16.5 17.8 13.9  
S.C.  
KW  
2.1  
2.1  
2.1  
2.1  
2.2  
2.1  
2.1  
2.1  
2.2  
2.2  
2.2  
2.2  
2.1  
2.2  
2.3  
T.C.  
13.5 14.9 13.8 16.8 20.1 15.5 16.9 15.6 18.3 21.6 17.5 18.9 17.4 19.8 23.1  
13.5 13.9 11.7 12.5 10.1 15.1 15.4 13.3 14.7 11.7 16.8 16.8 14.9 16.9 13.3  
S.C.  
KW  
2.2  
2.2  
2.2  
2.3  
2.4  
2.3  
2.3  
2.2  
2.3  
2.4  
2.3  
2.3  
2.3  
2.3  
2.4  
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.  
Multipliers for determining the performance with other indoor sections.  
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed  
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.  
Air Handlers  
–
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
S.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.01  
1.01  
1.04  
1.04  
1.00  
1.04  
1.00  
1.03  
1.00  
1.00  
1.01  
1.02  
KW  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.92  
0.92  
0.91  
0.91  
1.00  
0.91  
1.00  
0.91  
1.00  
1.00  
0.93  
0.92  
Furnaces  
Coils  
T.C.  
1.00  
1.00  
0.99  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.98  
0.98  
0.98  
S.C.  
1.01  
1.02  
0.98  
1.02  
1.00  
1.00  
1.00  
1.00  
1.01  
1.02  
1.02  
1.01  
1.01  
1.02  
1.01  
1.01  
1.01  
1.01  
1.00  
1.01  
1.00  
1.00  
1.02  
0.99  
0.99  
0.99  
KW  
0.96  
0.92  
0.91  
0.92  
0.92  
0.92  
0.92  
0.92  
0.92  
0.92  
0.92  
0.93  
0.92  
0.94  
0.93  
0.91  
0.92  
0.94  
0.92  
0.93  
0.93  
0.92  
0.94  
0.92  
0.91  
0.92  
FC/MC/PC32  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*9X*C16  
FC/MC/PC32A  
FC/MC/PC35B  
FC/MC/PC35C  
FC/MC/PC35C  
FC/MC/PC36A  
FC/MC/PC36B  
FC/MC/PC36B  
FC/MC/PC36C  
FC/MC/PC36C  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC32A  
FC/MC/PC35B  
–
FC/MC/PC35  
–
FC/MC/PC37  
–
FC/MC/PC43  
T*9X*C20  
–
HC30  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*9X*B12  
–
HC36  
–
HC42  
–
UC36  
T*9X*C16  
AHP30  
AHX30  
AHX36  
AV*36  
MV12B  
MA08B  
MV12B  
MA08B  
MV12B  
MA08B  
F4FP36  
F6FP030  
F6FP036  
–
T*9X*C20  
–
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)C*A12  
T*(8,L)C*B12  
–
–
FC/MC36B  
FC/MC36B  
FC/MC35B  
FC/MC35B  
FC/MC43B  
FC/MC43B  
–
(T*9C/T*9V)*B12 FC/MC/PC35B  
T*(8,L)C*A12  
T*(8,L)C*B12  
FC/MC/PC36A  
FC/MC/PC36B  
(T*9C/T*9V)*B12 FC/MC/PC36B  
T*(8,L)C*A12  
T*(8,L)C*B12  
FC/MC/PC37A  
FC/MC/PC43B  
–
(T*9C/T*9V)*B12 FC/MC/PC43B  
–
T*(8,L)C*A12  
T*(8,L)C*B12  
HC30  
HC36  
(T*9C/T*9V)*B12 HC36  
T*(8,L)C*A12  
T*(8,L)C*B12  
UC36A  
UC36B  
(T*9C/T*9V)*B12 UC36B  
Johnson Controls Unitary Products  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
COOLING PERFORMANCE DATA  
AIR CONDITIONER MODEL NO.  
TCGD30S41S1(H)  
INDOOR COIL MODEL NO.  
FC/MC/PC35  
IDCFM  
800  
75  
1000  
75  
1200  
75  
CONDENSING  
ENTERING AIR  
TEMPERATURE  
ID DB (°F)  
ID WB (°F)  
T.C.  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
62  
62  
62  
28.4 31.4 30.8 33.1 34.4 29.8 31.8 31.4 33.4 34.5 31.2 32.3 32.1 33.7 34.7  
28.8 25.8 21.7 21.2 16.0 30.4 28.2 23.6 22.6 17.1 31.9 30.7 25.4 24.0 18.1  
65  
75  
S.C.  
KW  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
T.C.  
26.4 28.8 28.2 30.9 32.6 27.9 29.7 28.9 31.4 32.8 29.5 30.5 29.6 31.8 32.9  
26.9 24.7 20.5 20.3 15.4 28.5 27.1 22.6 22.0 16.4 30.2 29.5 24.6 23.7 17.5  
S.C.  
KW  
1.8  
1.8  
1.8  
1.9  
1.9  
1.8  
1.8  
1.8  
1.9  
1.9  
1.9  
1.9  
1.9  
1.9  
1.9  
T.C.  
24.4 26.3 25.6 28.8 30.9 26.0 27.5 26.4 29.3 31.0 27.7 28.7 27.1 29.8 31.2  
24.9 23.6 19.4 19.4 14.7 26.6 26.0 21.6 21.4 15.8 28.4 28.4 23.9 23.4 16.8  
85  
S.C.  
KW  
2.0  
2.0  
2.0  
2.0  
2.1  
2.0  
2.0  
2.0  
2.0  
2.1  
2.0  
2.0  
2.0  
2.1  
2.1  
T.C.  
22.4 23.8 23.0 26.7 29.1 24.2 25.3 23.8 29.0 29.3 26.0 26.9 24.7 27.9 29.4  
22.9 22.5 18.2 18.5 14.1 24.8 24.9 20.7 21.2 15.1 26.7 27.3 23.1 23.1 16.2  
95  
S.C.  
KW  
2.1  
2.1  
2.1  
2.2  
2.3  
2.2  
2.2  
2.2  
2.2  
2.3  
2.2  
2.2  
2.2  
2.2  
2.3  
T.C.  
20.5 21.8 20.4 23.7 26.3 22.0 23.1 21.3 24.3 26.4 23.6 24.5 22.1 24.8 26.4  
21.0 20.7 17.1 17.4 13.2 22.6 22.7 19.1 19.7 14.3 24.3 24.7 21.0 22.0 15.4  
105  
115  
125  
S.C.  
KW  
2.3  
2.3  
2.3  
2.4  
2.4  
2.4  
2.4  
2.3  
2.4  
2.5  
2.4  
2.4  
2.3  
2.4  
2.5  
T.C.  
18.6 19.8 17.9 20.9 23.5 19.9 21.0 18.8 21.4 23.5 21.2 22.2 19.6 21.8 23.6  
19.1 18.9 15.9 16.4 12.3 20.5 20.5 17.5 18.6 13.5 22.0 22.2 19.1 20.9 14.7  
S.C.  
KW  
2.5  
2.5  
2.4  
2.5  
2.6  
2.5  
2.5  
2.5  
2.5  
2.6  
2.6  
2.6  
2.5  
2.6  
2.6  
T.C.  
16.8 17.9 15.4 18.1 20.7 17.8 18.9 16.2 18.5 20.7 18.9 19.9 17.1 18.8 20.7  
17.3 17.2 14.8 15.3 11.4 18.4 18.4 16.0 17.6 12.6 19.6 19.6 17.1 19.8 13.9  
S.C.  
KW  
2.7  
2.7  
2.6  
2.7  
2.8  
2.7  
2.7  
2.6  
2.7  
2.8  
2.7  
2.7  
2.7  
2.7  
2.8  
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.  
Multipliers for determining the performance with other indoor sections.  
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed  
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.  
Furnaces  
Coils  
T.C.  
1.03  
1.03  
0.97  
1.02  
1.03  
1.03  
0.97  
1.01  
1.02  
1.02  
1.02  
1.03  
1.02  
1.02  
1.03  
1.03  
1.03  
1.03  
1.03  
1.03  
1.03  
1.02  
1.02  
1.03  
1.03  
1.03  
1.03  
S.C.  
1.09  
1.09  
0.92  
1.01  
1.09  
1.09  
0.92  
1.03  
1.01  
1.04  
1.04  
1.06  
1.04  
1.04  
1.03  
1.04  
1.04  
1.04  
1.04  
1.04  
1.04  
1.01  
1.04  
1.04  
1.04  
1.04  
1.04  
KW  
0.99  
0.95  
0.89  
0.94  
0.99  
0.95  
0.89  
0.99  
0.95  
0.97  
0.93  
0.94  
0.94  
0.93  
0.97  
0.95  
0.97  
0.93  
0.92  
0.95  
0.93  
0.95  
0.97  
0.93  
0.92  
0.95  
0.93  
Air Handlers  
–
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.01  
1.03  
1.03  
1.01  
1.02  
1.00  
1.01  
1.02  
1.00  
1.00  
1.01  
1.01  
S.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.06  
1.06  
1.04  
1.02  
1.02  
1.00  
1.02  
1.02  
1.00  
1.00  
1.03  
1.02  
KW  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.95  
0.95  
0.95  
0.92  
0.93  
1.00  
0.92  
0.93  
1.00  
1.00  
0.97  
0.93  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC32A  
FC/MC/PC35B  
FC/MC/PC35B  
FC/MC/PC35C  
FC/MC/PC35C  
FC/MC/PC35C  
FC/MC/PC35C  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43C  
HC36  
FC/MC/PC35  
–
FC/MC/PC37  
–
FC/MC/PC43  
–
HC36  
–
HC42  
T*9X*C16  
AHP30  
AHP36  
AHX30  
AHX36  
AV*36  
MV12B  
MV16C  
MA12B  
MV12B  
MV16C  
MA12B  
F4FP040  
F6FP030  
F6FP036  
–
T*9X*C20  
–
T*(8,L)C*A12  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)C*A12  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
–
–
–
FC/MC35B  
FC/MC35C  
FC/MC35B  
FC/MC43B  
FC/MC43C  
FC/MC43B  
–
–
–
Furnaces  
Coils  
T.C.  
1.01  
1.03  
1.03  
0.99  
1.03  
1.03  
S.C.  
1.02  
1.09  
1.09  
0.98  
1.09  
1.07  
KW  
1.01  
0.99  
0.95  
0.91  
0.94  
0.94  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
FC/MC/PC32A  
FC/MC/PC35B  
FC/MC/PC35C  
FC/MC/PC35C  
FC/MC/PC35B  
FC/MC/PC35C  
HC36  
HC42  
HC42  
HC42  
HC42  
T*9X*C16  
14  
Johnson Controls Unitary Products  
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
COOLING PERFORMANCE DATA  
AIR CONDITIONER MODEL NO.  
TCGD36S41S1(H)  
INDOOR COIL MODEL NO.  
FC/MC/PC43  
IDCFM  
1000  
75  
1200  
75  
1400  
CONDENSING  
ENTERING AIR  
TEMPERATURE  
ID DB (°F)  
ID WB (°F)  
T.C.  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
75  
62  
80  
67  
80  
72  
62  
62  
34.7 36.1 35.2 37.4 37.3 33.8 35.5 34.8 37.0 37.5 32.9 34.9 34.4 36.6 37.6  
34.3 33.0 27.6 25.5 18.4 33.3 31.0 26.2 24.6 18.0 32.3 29.1 24.7 23.6 17.7  
65  
75  
S.C.  
KW  
2.0  
2.0  
2.0  
2.0  
2.0  
2.0  
2.0  
2.0  
2.0  
2.0  
1.9  
2.0  
1.9  
2.0  
2.0  
T.C.  
33.6 34.7 33.6 35.9 36.6 32.6 33.9 33.2 35.5 36.6 31.5 33.2 32.7 35.1 36.6  
33.3 32.5 27.5 25.6 18.6 32.1 30.6 25.8 24.5 18.0 31.0 28.7 24.2 23.3 17.5  
S.C.  
KW  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.1  
2.2  
2.2  
2.2  
2.2  
T.C.  
32.4 33.2 32.0 34.4 35.8 31.3 32.3 31.5 34.1 35.7 30.2 31.5 31.0 33.7 35.5  
32.2 32.0 27.3 25.8 18.8 30.9 30.2 25.5 24.3 18.0 29.6 28.3 23.7 22.9 17.3  
85  
S.C.  
KW  
2.4  
2.4  
2.4  
2.4  
2.4  
2.4  
2.4  
2.4  
2.4  
2.4  
2.3  
2.4  
2.4  
2.4  
2.4  
T.C.  
31.3 31.7 30.4 33.0 35.0 30.1 30.7 29.9 35.0 34.8 28.9 29.8 29.4 32.2 34.5  
31.1 31.5 27.2 26.0 19.0 29.7 29.7 25.2 24.9 18.0 28.3 27.9 23.2 22.5 17.1  
95  
S.C.  
KW  
2.6  
2.6  
2.6  
2.6  
2.7  
2.6  
2.6  
2.6  
2.6  
2.7  
2.5  
2.6  
2.6  
2.6  
2.6  
T.C.  
27.9 28.8 27.2 29.8 32.5 27.0 27.8 26.6 29.4 32.2 26.0 26.9 25.9 29.0 31.9  
28.7 28.9 25.0 25.0 18.4 27.3 27.2 23.2 23.2 17.3 25.8 25.6 21.5 21.4 16.2  
105  
115  
125  
S.C.  
KW  
2.8  
2.8  
2.8  
2.8  
2.9  
2.8  
2.8  
2.8  
2.8  
2.9  
2.7  
2.8  
2.7  
2.8  
2.9  
T.C.  
24.6 26.0 24.2 26.8 30.1 23.9 25.1 23.4 26.3 29.8 23.3 24.1 22.6 25.9 29.5  
26.3 26.3 22.8 24.1 17.8 24.9 24.8 21.3 22.2 16.6 23.5 23.3 19.8 20.3 15.4  
S.C.  
KW  
3.0  
3.0  
3.0  
3.0  
3.1  
3.0  
3.0  
2.9  
3.0  
3.1  
2.9  
2.9  
2.9  
3.0  
3.1  
T.C.  
21.3 23.2 21.1 23.7 27.6 20.9 22.3 20.2 23.2 27.3 20.5 21.3 19.3 22.7 27.0  
23.9 23.8 20.6 23.2 17.2 22.5 22.4 19.4 21.2 15.9 21.1 21.0 18.2 19.2 14.6  
S.C.  
KW  
3.2  
3.2  
3.2  
3.2  
3.4  
3.2  
3.2  
3.1  
3.2  
3.3  
3.1  
3.1  
3.1  
3.2  
3.3  
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.  
Multipliers for determining the performance with other indoor sections.  
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed  
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.  
Furnaces  
Coils  
T.C.  
1.01  
1.01  
0.98  
0.99  
0.99  
0.97  
0.97  
0.97  
1.01  
1.01  
1.02  
1.02  
1.01  
1.02  
1.03  
1.03  
1.03  
1.03  
1.03  
1.02  
1.02  
1.01  
1.02  
0.99  
0.99  
0.99  
1.00  
0.99  
S.C.  
1.01  
1.01  
1.00  
1.02  
1.00  
0.99  
0.99  
0.93  
1.01  
1.01  
1.02  
1.02  
1.02  
1.02  
1.05  
1.05  
1.04  
1.06  
1.05  
1.02  
1.03  
1.02  
1.02  
1.00  
1.00  
1.00  
1.03  
1.01  
KW  
0.97  
0.97  
0.93  
0.95  
0.97  
0.95  
0.95  
0.94  
0.98  
0.98  
0.94  
0.93  
0.97  
0.95  
0.94  
0.93  
0.95  
0.97  
0.94  
0.94  
0.93  
0.97  
0.95  
0.93  
0.92  
0.94  
0.97  
0.94  
Air Handlers  
–
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.01  
1.01  
1.01  
1.01  
1.00  
1.01  
1.01  
1.00  
1.01  
1.00  
1.02  
S.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.01  
1.02  
1.01  
1.02  
1.00  
1.02  
1.03  
1.00  
1.02  
1.00  
1.04  
KW  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.96  
0.94  
0.92  
0.92  
1.00  
0.92  
0.92  
1.00  
0.92  
1.00  
0.98  
T*9X*C20  
FC/MC/PC48C  
FC/MC/PC48D  
UC48C  
FC/MC/PC43  
T*9X*D20  
–
FC/MC/PC48  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
–
HC42  
UC48C  
–
UC48  
UC48C  
AHP36  
AHP42  
AHX36  
AHX42  
AV*36  
MV16C  
MA12B  
MV16C  
MV20D  
MA14D  
MV12D  
F5FP048  
F6FP042  
–
T*9X*C20  
UC48C  
–
T*9X*D20  
UC48D  
–
T*(8,L)C*A12  
T*(8,L)C*B12  
(T*9C/T*9V)*B12  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
HC42  
–
–
FC/MC43C  
FC/MC43B  
FC/MC48C  
FC/MC48D  
FC/MC48D  
FC/MC48D  
–
–
Furnaces  
Coils  
T.C.  
1.01  
1.01  
1.01  
1.02  
1.01  
1.01  
1.00  
1.02  
1.02  
1.02  
S.C.  
1.02  
1.02  
1.00  
1.03  
1.02  
1.02  
0.99  
1.02  
1.04  
1.04  
KW  
0.98  
0.98  
0.96  
0.96  
0.98  
0.98  
0.96  
0.97  
0.98  
0.98  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
HC42  
HC42  
HC42  
UC48C  
UC48C  
T*9X*C16  
UC48C  
T*9X*C20  
UC48C  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
UC48D  
Johnson Controls Unitary Products  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
COOLING PERFORMANCE DATA  
AIR CONDITIONER MODEL NO.  
TCGD42S41S1(H)  
INDOOR COIL MODEL NO.  
FC/MC/PC43  
IDCFM  
1200  
75  
1400  
75  
1600  
75  
CONDENSING  
ENTERING AIR  
TEMPERATURE  
ID DB (°F)  
ID WB (°F)  
T.C.  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
62  
62  
62  
44.4 45.5 43.6 47.0 48.5 45.9 46.5 45.0 48.5 49.8 47.5 47.5 46.5 50.1 51.1  
41.5 35.6 29.7 28.7 21.5 42.9 37.5 31.4 30.2 22.9 44.4 39.4 33.2 31.7 24.3  
65  
75  
S.C.  
KW  
2.5  
2.5  
2.5  
2.5  
2.5  
2.5  
2.5  
2.5  
2.5  
2.6  
2.5  
2.5  
2.5  
2.5  
2.6  
T.C.  
42.3 42.9 41.2 45.1 46.6 44.2 44.3 42.7 46.6 47.9 46.0 45.7 44.2 48.1 49.1  
39.4 35.2 29.2 28.5 21.3 41.1 37.4 31.1 30.1 22.4 42.9 39.7 33.0 31.8 23.6  
S.C.  
KW  
2.7  
2.7  
2.7  
2.8  
2.8  
2.7  
2.7  
2.7  
2.8  
2.8  
2.8  
2.8  
2.8  
2.8  
2.9  
T.C.  
40.2 40.3 38.9 43.3 44.6 42.4 42.1 40.4 44.7 45.9 44.6 43.9 41.9 46.0 47.2  
37.2 34.7 28.7 28.2 21.2 39.3 37.3 30.8 30.0 22.0 41.5 40.0 32.9 31.8 22.9  
85  
S.C.  
KW  
3.0  
3.0  
3.0  
3.0  
3.1  
3.0  
3.0  
3.0  
3.1  
3.1  
3.0  
3.0  
3.0  
3.1  
3.1  
T.C.  
38.2 37.7 36.5 41.5 42.7 40.7 39.9 38.0 42.0 44.0 43.2 42.1 39.6 43.9 45.3  
35.0 34.3 28.1 28.0 21.0 37.5 37.3 30.5 29.4 21.6 40.0 40.3 32.8 31.9 22.2  
95  
S.C.  
KW  
3.2  
3.2  
3.2  
3.3  
3.4  
3.3  
3.3  
3.3  
3.3  
3.4  
3.3  
3.3  
3.3  
3.4  
3.4  
T.C.  
35.3 34.7 32.8 37.4 38.7 37.5 36.7 34.2 38.6 39.8 39.8 38.8 35.6 39.8 40.9  
32.3 32.1 26.5 26.4 19.6 34.5 34.5 28.8 28.4 20.4 36.7 37.0 31.1 30.5 21.2  
105  
115  
125  
S.C.  
KW  
3.5  
3.5  
3.5  
3.6  
3.7  
3.5  
3.5  
3.5  
3.6  
3.7  
3.6  
3.6  
3.5  
3.6  
3.7  
T.C.  
32.4 31.7 29.2 33.4 34.8 34.5 33.6 30.5 34.6 35.7 36.5 35.5 31.8 35.7 36.7  
29.7 30.0 25.0 24.9 18.2 31.6 31.9 27.2 27.0 19.3 33.5 33.8 29.4 29.1 20.3  
S.C.  
KW  
3.7  
3.7  
3.7  
3.8  
4.0  
3.8  
3.8  
3.7  
3.8  
4.0  
3.8  
3.8  
3.7  
3.9  
4.0  
T.C.  
29.6 28.8 25.6 29.4 30.9 31.4 30.5 26.8 30.5 31.7 33.2 32.2 28.0 31.7 32.5  
27.1 27.9 23.5 23.4 16.8 28.7 29.3 25.6 25.6 18.1 30.2 30.6 27.6 27.8 19.4  
S.C.  
KW  
4.0  
4.0  
3.9  
4.0  
4.2  
4.0  
4.0  
4.0  
4.1  
4.3  
4.1  
4.1  
4.0  
4.1  
4.3  
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.  
Multipliers for determining the performance with other indoor sections.  
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed  
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.  
Furnaces  
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
0.99  
1.00  
1.00  
1.00  
1.00  
0.99  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.99  
0.99  
0.99  
0.99  
0.99  
S.C.  
1.00  
1.02  
1.01  
1.03  
1.00  
1.01  
1.01  
1.01  
1.02  
0.99  
1.00  
1.01  
1.01  
1.01  
1.01  
1.01  
1.01  
1.01  
1.01  
1.01  
1.01  
1.01  
1.01  
1.01  
1.01  
KW  
0.96  
0.96  
1.00  
1.00  
0.99  
1.00  
1.00  
0.97  
0.97  
0.97  
0.97  
0.97  
0.96  
0.98  
0.98  
0.97  
0.97  
0.97  
0.98  
0.97  
0.96  
0.95  
0.97  
0.97  
0.96  
Air Handlers  
–
Coils  
T.C.  
1.00  
1.00  
1.00  
0.97  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.99  
S.C.  
1.00  
1.00  
1.00  
1.00  
1.02  
1.02  
1.00  
1.02  
1.02  
1.00  
1.00  
1.00  
1.03  
1.01  
KW  
1.00  
1.00  
1.00  
0.97  
0.92  
0.91  
1.00  
0.91  
0.91  
1.00  
1.00  
1.00  
0.94  
0.93  
T*9X*C20  
FC/MC/PC48C  
FC/MC/PC48D  
UC48C  
FC/MC/PC48  
T*9X*D20  
–
HC42  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
–
UC48  
UC48C  
AHP42  
AHX42  
MV16C  
MA16C  
MV16C  
MV20D  
MA14D  
MA16C  
F5FP048  
F6FP042  
F6FP048  
–
UC48C  
–
T*9X*C20  
UC48C  
FC/MC43C  
FC/MC43C  
FC/MC48C  
FC/MC48D  
FC/MC48D  
FC/MC48C  
–
T*9X*D20  
UC48D  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
HC42  
–
–
Furnaces  
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
S.C.  
0.99  
1.02  
1.01  
0.99  
1.02  
1.02  
1.01  
1.03  
1.00  
KW  
0.96  
0.96  
0.96  
0.96  
1.00  
1.00  
0.96  
0.96  
0.96  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
HC42  
HC42  
HC42  
UC48C  
T*9X*C16  
UC48C  
T*9X*C20  
UC48C  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
UC48C  
UC48D  
16  
Johnson Controls Unitary Products  
Download from Www.Somanuals.com. All Manuals Search And Download.  
359319-BTG-G-0509  
COOLING PERFORMANCE DATA  
AIR CONDITIONER MODEL NO.  
TCGD48S41S1(H)  
INDOOR COIL MODEL NO.  
FC/MC/PC48  
IDCFM  
1400  
75  
1600  
75  
1800  
CONDENSING  
ENTERING AIR  
TEMPERATURE  
ID DB (°F)  
ID WB (°F)  
T.C.  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
75  
62  
80  
67  
80  
72  
62  
62  
49.7 51.4 50.6 55.8 54.6 52.0 53.1 51.9 56.4 55.4 54.4 54.7 53.2 56.9 56.3  
47.2 43.1 35.9 36.0 26.1 49.2 45.9 38.2 37.4 27.6 51.2 48.7 40.4 38.8 29.0  
65  
75  
S.C.  
KW  
2.7  
2.8  
2.8  
2.8  
2.8  
2.7  
2.8  
2.8  
2.8  
2.8  
2.7  
2.8  
2.8  
2.8  
2.9  
T.C.  
47.5 48.6 47.7 52.9 52.4 49.8 50.3 48.9 53.6 53.1 52.0 52.1 50.2 54.3 53.8  
44.9 42.0 35.0 34.9 25.4 47.0 44.8 37.1 36.5 26.8 49.0 47.6 39.3 38.2 28.1  
S.C.  
KW  
3.0  
3.0  
3.0  
3.1  
3.1  
3.0  
3.0  
3.0  
3.1  
3.2  
3.0  
3.0  
3.0  
3.1  
3.2  
T.C.  
45.4 45.8 44.8 49.9 50.2 47.5 47.6 46.0 50.8 50.8 49.7 49.4 47.1 51.7 51.4  
42.7 41.0 34.0 33.8 24.8 44.7 43.7 36.1 35.7 26.0 46.8 46.5 38.2 37.6 27.2  
85  
S.C.  
KW  
3.2  
3.3  
3.3  
3.4  
3.4  
3.3  
3.3  
3.3  
3.4  
3.5  
3.3  
3.3  
3.3  
3.4  
3.5  
T.C.  
43.2 42.9 42.0 47.0 47.9 45.3 44.9 43.1 48.0 48.4 47.4 46.8 44.1 49.1 48.9  
40.4 39.9 33.0 32.7 24.1 42.4 42.6 35.1 34.6 25.2 44.5 45.4 37.1 37.0 26.3  
95  
S.C.  
KW  
3.5  
3.5  
3.5  
3.6  
3.7  
3.6  
3.6  
3.5  
3.7  
3.8  
3.6  
3.6  
3.6  
3.7  
3.8  
T.C.  
39.8 39.4 37.3 42.4 43.6 41.6 41.1 38.4 43.4 44.0 43.5 42.9 39.5 44.4 44.5  
37.1 37.0 30.9 30.9 22.9 38.9 39.3 32.9 33.0 23.9 40.8 41.5 34.9 35.1 25.0  
105  
115  
125  
S.C.  
KW  
3.8  
3.8  
3.8  
3.9  
4.0  
3.9  
3.9  
3.8  
3.9  
4.1  
3.9  
3.9  
3.8  
4.0  
4.1  
T.C.  
36.5 35.9 32.7 38.0 39.3 38.1 37.5 33.9 38.9 39.8 39.7 39.1 35.1 39.8 40.2  
33.9 34.2 28.9 29.2 21.6 35.5 36.0 30.9 31.3 22.7 37.2 37.7 32.8 33.3 23.8  
S.C.  
KW  
4.1  
4.1  
4.0  
4.2  
4.3  
4.1  
4.1  
4.1  
4.2  
4.4  
4.2  
4.2  
4.1  
4.2  
4.4  
T.C.  
33.1 32.4 28.1 33.5 35.1 34.5 33.8 29.4 34.4 35.5 35.9 35.3 30.6 35.2 36.0  
30.7 31.4 26.9 27.5 20.4 32.1 32.7 28.8 29.6 21.5 33.5 34.0 30.7 31.6 22.5  
S.C.  
KW  
4.4  
4.4  
4.3  
4.4  
4.6  
4.4  
4.4  
4.3  
4.5  
4.7  
4.5  
4.5  
4.4  
4.5  
4.7  
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.  
Multipliers for determining the performance with other indoor sections.  
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed  
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.  
Air Handlers  
–
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.98  
0.98  
S.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.01  
1.03  
1.01  
1.01  
1.01  
1.01  
1.00  
1.00  
1.01  
1.00  
1.00  
1.00  
1.00  
1.01  
1.01  
KW  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.96  
0.91  
0.91  
0.91  
0.91  
1.00  
1.00  
0.91  
1.00  
1.00  
1.00  
1.00  
0.95  
0.95  
Furnaces  
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.98  
0.99  
0.98  
0.98  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
S.C.  
1.00  
1.00  
1.01  
1.00  
1.01  
1.01  
1.01  
1.01  
1.01  
0.98  
0.98  
0.98  
1.00  
1.01  
1.00  
1.01  
1.01  
1.01  
1.02  
1.02  
1.02  
1.02  
KW  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.98  
0.99  
0.98  
0.98  
0.99  
0.99  
0.99  
0.99  
0.99  
0.98  
0.98  
0.96  
0.99  
0.99  
FC/MC/PC60  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
FC/PC60C  
–
HC60  
–
UC48  
–
UC60  
T*9X*C20  
AHP/SHP48  
AHP/SHP60  
AHX48  
AV/SV*48  
AV/SV*60  
MV16C  
MV20D  
MA16C  
MA20D  
MV20D  
MA16C  
MA20D  
F5FP048  
F5FP060  
F6FP048  
F4FV060  
–
T*9X*D20  
–
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
–
FC/MC/PC60D  
FC/PC60C  
–
–
T*9X*C20  
FC/PC60C  
FC/MC48C  
FC/MC48D  
FC/MC48C  
FC/MC48D  
FC/MC60D  
FC60C  
FC/MC60D  
–
T*9X*D20  
FC/MC/PC60D  
FC/PC60C  
T*9X*C16  
T*9X*C20  
FC/PC60C  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
(T*9C/T*9V)*D20  
T*(8,L)C*C16  
T*(8,L)C*C20  
(T*9C/T*9V)*C16  
(T*9C/T*9V)*C20  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
FC/MC/PC60D  
FC/PC60C  
–
–
–
FC/PC60C  
FC/PC60C  
FC/PC60C  
Johnson Controls Unitary Products  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COOLING PERFORMANCE DATA  
AIR CONDITIONER MODEL NO.  
TCGD60S41S1  
INDOOR COIL MODEL NO.  
FC/MC/PC60  
IDCFM  
1600  
75  
1800  
75  
2000  
75  
CONDENSING  
ENTERING AIR  
TEMPERATURE  
ID DB (°F)  
ID WB (°F)  
T.C.  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
62  
62  
62  
55.8 63.8 62.1 65.2 71.9 60.3 65.7 62.8 66.7 69.8 64.8 67.5 63.5 68.2 67.8  
54.7 51.6 41.4 41.1 34.1 58.4 54.2 43.9 42.6 31.9 62.1 56.8 46.5 44.2 29.6  
65  
75  
S.C.  
KW  
3.0  
3.0  
3.0  
3.1  
3.1  
3.0  
3.0  
3.0  
3.1  
3.1  
3.0  
3.1  
3.0  
3.1  
3.1  
T.C.  
56.9 61.1 58.9 62.7 69.7 59.2 63.0 59.9 64.3 67.9 61.4 64.9 61.0 65.9 66.0  
53.9 50.4 40.5 40.0 33.5 55.8 53.1 43.1 41.8 31.5 57.7 55.7 45.6 43.6 29.5  
S.C.  
KW  
3.4  
3.5  
3.5  
3.5  
3.6  
3.4  
3.5  
3.5  
3.5  
3.5  
3.5  
3.5  
3.5  
3.5  
3.5  
T.C.  
58.0 58.4 55.7 60.3 67.6 58.0 60.4 57.1 61.9 65.9 58.1 62.4 58.5 63.6 64.1  
53.2 49.3 39.7 39.0 32.9 53.3 52.0 42.2 41.0 31.2 53.4 54.7 44.8 42.9 29.4  
85  
S.C.  
KW  
3.9  
3.9  
3.9  
3.9  
4.0  
3.9  
3.9  
3.9  
3.9  
4.0  
3.9  
3.9  
3.9  
3.9  
4.0  
T.C.  
59.1 55.7 52.5 56.9 65.5 56.9 57.8 54.3 57.0 63.9 54.7 59.8 56.0 61.2 62.2  
52.4 48.1 38.8 37.9 32.3 50.7 50.9 41.4 38.8 30.8 49.0 53.6 43.9 42.3 29.4  
95  
S.C.  
KW  
4.3  
4.3  
4.3  
4.4  
4.5  
4.3  
4.3  
4.3  
4.4  
4.4  
4.3  
4.3  
4.3  
4.4  
4.4  
T.C.  
56.4 52.2 48.8 54.0 60.1 54.0 54.3 50.5 55.7 59.7 51.6 56.3 52.2 57.4 59.4  
49.7 45.9 37.5 36.5 29.7 47.9 48.3 40.0 38.7 29.4 46.2 50.6 42.5 40.9 29.0  
105  
115  
125  
S.C.  
KW  
4.9  
4.9  
4.9  
4.9  
5.0  
4.9  
4.9  
4.9  
5.0  
5.0  
4.9  
4.9  
4.9  
5.0  
5.0  
T.C.  
53.8 48.8 45.2 50.2 54.8 51.2 50.9 46.8 51.9 55.7 48.7 53.0 48.5 53.6 56.6  
47.1 43.8 36.2 35.0 27.3 45.3 45.7 38.6 37.3 27.9 43.5 47.7 41.1 39.6 28.6  
S.C.  
KW  
5.5  
5.4  
5.4  
5.5  
5.6  
5.5  
5.5  
5.4  
5.5  
5.6  
5.4  
5.5  
5.4  
5.5  
5.6  
T.C.  
51.2 45.4 41.6 46.5 49.4 48.5 47.5 43.2 48.2 51.6 45.7 49.7 44.8 49.8 53.8  
44.5 41.7 34.9 33.6 24.9 42.6 43.2 37.3 35.9 26.5 40.7 44.7 39.7 38.3 28.2  
S.C.  
KW  
6.1  
6.0  
5.9  
6.1  
6.2  
6.0  
6.0  
6.0  
6.1  
6.2  
6.0  
6.0  
6.0  
6.1  
6.2  
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.  
Multipliers for determining the performance with other indoor sections.  
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed  
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.  
Air Handlers  
–
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
S.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.01  
1.01  
1.00  
1.01  
1.00  
1.00  
1.00  
1.00  
KW  
1.00  
1.00  
1.00  
1.00  
0.98  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.96  
0.99  
Furnaces  
Coils  
T.C.  
0.99  
1.00  
0.98  
0.98  
0.99  
0.99  
1.00  
0.98  
0.99  
0.98  
0.98  
0.98  
0.99  
0.98  
0.97  
0.99  
0.98  
0.99  
0.98  
0.97  
0.94  
0.95  
0.94  
0.94  
S.C.  
0.98  
0.98  
0.98  
0.98  
0.98  
0.98  
0.98  
0.97  
1.00  
0.97  
0.97  
0.97  
1.00  
0.97  
0.95  
0.97  
0.96  
0.96  
0.96  
0.95  
0.93  
0.91  
0.90  
0.90  
KW  
0.99  
1.00  
0.98  
0.98  
0.99  
0.99  
1.00  
0.98  
0.99  
0.98  
0.98  
0.98  
0.99  
0.98  
0.96  
0.94  
0.97  
0.96  
0.94  
0.96  
0.95  
0.93  
0.96  
0.95  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
FC/PC60C  
FC/MC/PC60D  
FC/PC60C  
FC/PC60C  
FC/MC/PC60D  
FC/MC/PC60D  
FC/MC62D  
UC60C  
FC/MC62  
–
HC60  
–
UC60  
T*9X*C20  
AHP/SHP60  
AHX60  
AV/SV*60  
MV20D  
MA20D  
MV20D  
MA20D  
F5FP060  
F6FP060  
F4FV060  
–
T*9X*D20  
–
T*9X*C20  
–
T*(8,L)X*C20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
FC/MC60D  
FC/MC60D  
UC60D  
FC/MC62D  
FC/PC60C  
FC/PC60C  
UC60D  
FC/MC62D  
T*9X*C20  
–
–
–
T*9X*D20  
T*(8,L)X*C20  
T*9X*C20  
UC60D  
UC60D  
(T*9C/T*9V)*D20  
T*(8,L)C*C20  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
T*(8,L)C*C20  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
T*(8,L)C*C20  
(T*9C/T*9V)*C20  
(T*9C/T*9V)*D20  
FC/MC/PC60D  
FC/MC62D  
FC/MC62D  
FC/MC62D  
FC/PC60C  
FC/PC60C  
HC60  
UC60C  
UC60C  
UC60D  
Subject to change without notice. Published in U.S.A.  
Copyright © 2009 by Johnson Controls, Inc. All rights reserved.  
359319-BTG-G-0509  
Supersedes: 359319-FTG-F-0309  
Johnson Controls Unitary Products  
5005 York Drive  
Norman, OK 73069  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer PWE 91272 W User Manual
JVC Digital Camera GR DV4000 User Manual
Karcher Pressure Washer G 2000 MK User Manual
Kawasaki Motorized Toy Car 74110 User Manual
Kenwood MP3 Player HD20GA7 User Manual
Kenwood Stereo System KRF V6200D User Manual
King Canada Nail Gun 8228 User Manual
KitchenAid Ice Maker KUIS15NRTBO User Manual
Kolcraft Stroller S47J R7 User Manual
KoldFront Air Conditioner PAC9000 User Manual