JVC Projector DLA RS1X User Manual

ENGLISH FRANÇAIS ESPAÑOL  
INSTRUCTIONS  
MANUEL D’INSTRUCTIONS  
MANUAL DE INSTRUCCIONES  
D-ILA PROJECTOR  
PROJECTEUR D-ILA  
PROYECTOR D-ILA  
DLA-RS1X  
For Customer use :  
Pour utilisation par le client :  
Entrer ci-dessous le N° de série qui  
est situé sous le boîtier. Garder  
cette information comme référence  
pour le futur.  
Instrucción para el cliente :  
Enter below the serial No. which is  
located on the bottom side of the  
cabinet. Retain this information for  
future reference.  
Introduzca a continuación el nº de  
serie que aparece en la parte  
inferior lateral de la caja. Conserve  
esta información como referencia  
para uso ulterior.  
Model No. DLA-RS1X  
Serial No.  
N° de modèle DLA-RS1X  
N° de série  
Modelo Nº DLA-RS1X  
Nº de serie  
LCT2398-001A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
- To allow better heat dissipation, keep a clearance between  
this unit and its surrounding as shown below. When this  
unit is enclosed in a space of dimensions as shown below,  
use an air-conditioner so that the internal and external  
temperatures are the same.  
-
Upon completion of any service or repairs to this product,  
ask the service technician to perform safety checks to  
determine that the product is in proper operating condition.  
- The product should be placed more than one foot away  
from heat sources such as radiators, heat registers,  
stoves, and other products (including amplifiers) that  
produce heat.  
150 mm and above  
- When connecting other products such as VCR’s, and DVD  
players, you should turn off the power of this product for  
protection against electric shock.  
300 mm  
and above  
300 mm  
and above  
- Do not place combustibles behind the cooling fan. For  
example, cloth, paper, matches, aerosol cans or gas  
lighters that present special hazards when over heated.  
- Do not look into the projection lens while the illumination  
lamp is turned on. Exposure of your eyes to the strong  
light can result in impaired eyesight.  
150 mm  
and above  
200 mm  
and above  
- Do not look into the inside of this unit through vents  
(ventilation holes), etc. Do not look at the illumination lamp  
directly by opening the cabinet while the illumination lamp  
is turned on. The illumination lamp also contains ultraviolet  
rays and the light is so powerful that your eyesight can be  
impaired.  
- Do not drop, hit, or damage the light-source lamp (lamp  
unit) in any way. It may cause the light-source lamp to  
break and lead to injuries. Do not use a damaged light  
source lamp. If the light-source lamp is broken, ask your  
dealer to repair it. Fragments from a broken light-source  
lamp may cause injuries.  
- The light-source lamp used in this projector is a high  
pressure mercury lamp. Be careful when disposing of the  
lightsource lamp. If anything is unclear, please consult  
your dealer.  
- Do not ceiling-mount the projector to a place which tends  
to vibrate; otherwise, the attaching fixture of the projector  
could be broken by the vibration, possibly causing it to fall  
or overturn, which could lead to personal injury.  
- Use only the accessory cord designed for this product to  
prevent shock.  
- This product should be operated only with the type of  
power source indicated on the label. If you are not sure of  
the type of power supply to your home, consult your  
product dealer or local power company.  
- This product is equipped with a three-wire plug. This plug  
will fit only into a grounded power outlet. If you are unable  
to insert the plug into the outlet, contact your electrician to  
install the proper outlet. Do not defeat the safety purpose  
of the grounded plug.  
- Power-supply cords should be routed so that they are not  
likely to be walked on or pinched by items placed upon or  
against them. Pay particular attention to cords at doors,  
plugs, receptacles, and the point where they exit from the  
product.  
- For added protection of this product during a lightning  
storm, or when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet and  
disconnect the cable system. This will prevent damage to  
the product due to lightning and power line surges.  
- Do not overload wall outlets, extension cords, or  
convenience receptacles on other equipment as this can  
result in a risk of fire or electric shock.  
- Never push objects of any kind into this product through  
openings as they may touch dangerous voltage points or  
short out parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the product.  
- Do not attempt to service this product yourself as opening  
or removing covers may expose you to dangerous  
voltages and other hazards. Refer all service to qualified  
service personnel.  
*DO NOT allow any unqualified person to install the  
unit.  
Be sure to ask your dealer to install the unit (e.g.  
attaching it to the ceiling) since special technical  
knowledge and skills are required for installation. If  
installation is performed by an unqualified person, it  
may cause personal injury or electrical shock.  
-
Unplug this product from the wall outlet and refer service to  
qualified service personnel under the following conditions:  
a) When the power supply cord or plug is damaged.  
b) If liquid has been spilled, or objects have fallen on the product.  
c) If the product has been exposed to rain or water.  
d) If the product does not operate normally by following the  
operating instructions. Adjust only those controls that are  
covered by the Operation Manual, as an improper adjustment  
of controls may result in damage and will often require  
extensive work by a qualified technician to restore the product  
to normal operation.  
e) If the product has been dropped or damaged in any way.  
f) When the product exhibits a distinct change in performance -  
this indicates a need for service.  
- When replacement parts are required, be sure the service  
technician has used replacement parts specified by the  
manufacturer or with same characteristics as the original  
part. Unauthorized substitutions may result in fire, electric  
shock, or other hazards.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Getting Started  
Safety Precautions (Continued)  
POWER CONNECTION  
For USA and Canada only  
Use only the following power cord.  
Power cord  
WARNING:  
Do not cut off the main plug from this equipment.  
If the plug fitted is not suitable for the power points in  
your home or the cable is too short to reach a power  
point, then obtain an appropriate safety approved  
extension lead or adapter or consult your dealer.  
If nonetheless the mains plug is cut off, dispose of the  
plug immediately, to avoid a possible shock hazard by  
inadvertent connection to the main supply. If a new main  
plug has to be fitted, then follow the instruction given  
below.  
WARNING:  
THIS APPARATUS MUST BE EARTHED.  
IMPORTANT:  
The wires in the mains lead on this product are colored  
in accordance with the following cord:  
Green-and-yellow : Earth  
Blue  
Brown  
: Neutral  
: Live  
As these colors may not correspond with the colored  
making identifying the terminals in your plug, proceed  
as follows:  
The wire which is colored green-and-yellow must be  
connected to the terminal which is marked M with the  
letter E or the safety earth or colored green or green-  
and-yellow.  
The wire which is colored blue must be connected to the  
terminal which is marked with the letter N or colored  
black.  
The wire which is colored brown must be connected to  
the terminal which is marked with the letter L or colored  
red.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main Features  
Supports Multiple Digital  
Devices  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
zComes with a dual HDMI terminal that  
allows digital transmission of high  
definition signals. (pP14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Beautiful Images on Big Screen  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
zEnjoy smooth and high resolution video images with no  
visible grid, brought about by full high definition resolution  
of 1920 c 1080 pixels. (pP20)  
Perfect for Any Location  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
zComes with an 80 % vertical and 34 % horizontal  
lens shift function. (pP18)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Getting Started  
Getting Started  
Replacing the Lamp ...........................................38  
Procedure for Lamp Replacement ................................... 38  
Resetting Lamp Time...................................................... 40  
Controls and Features ........................................10  
How to Use the Remote Control...........................13  
Loading Batteries...........................................................13  
Others  
Selecting Connecting Devices..............................14  
Caution........................................................................ 47  
Mounting this Unit......................................................... 48  
Connecting........................................................15  
Connecting via Video Cable...........................................15  
Connecting via S-video Cable ........................................15  
Connecting via HDMI Cable Or  
Connecting via SCART-RCA Cable..................................17  
Connecting via RGB Video Cable ...................................17  
Specifications....................................................49  
Dimensions................................................................... 50  
Installing the Projector and Screen.......................18  
Projecting Image................................................20  
Convenient Features during Projection.................22  
Setting the Screen Size...................................................22  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Setting Menu.................................................................25  
Customizing Projected Images ............................32  
Changing the Default Image Profile Values......................32  
Registering User-defined Image Profiles...........................33  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ENGLISH  
How to Read this Manual/  
Accessories/Optional Accessories  
About this Manual  
This manual mainly describes the operating method using the remote  
control.  
C
N
D
USER  
1
USER  
2
USER  
3
zButtons on the remote control are described as [Button Name].  
zSelection items on the menu are described as “Selection Item”.  
COLOR  
+
SHARP  
+
GAMMA  
Conventions in this manual  
COLOR  
SHARP  
COLOR  
TEMP  
BRIGHT  
CONTRAST  
INFO  
Describes the limitations of the functions or usage.  
HIDE  
Indicates good-to-know information.  
Describes operational precautions.  
MENU  
EXIT  
ENTER  
Indicates related pages.  
pP9  
TEST  
LIGHT  
Buttons to be used are colored in a  
darker shade.  
Check the Accessories  
Remote Control  
AAA size Batteries  
(for operation confirmation)  
Power Cord  
(2.4 m)  
zInstruction manual, warranty card and other printed material are also included.  
Optional Accessories  
Please check with your authorized dealer for details.  
zReplacement Lamp: BHL5009-S (Lamp Unit)  
zReplacement Filter: LC32058-002A (Inner Filter)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
1
Getting Started  
Controls and Features  
To adjust the focus  
(pP21)  
To adjust the size of the image  
(pP21)  
zThis unit comes with buffer material that cushions the lens. Remove the buffer  
material before use.  
zDo not throw away the buffer material, retain for future use. (pP47)  
Front Side/Left Side  
Remote Sensor  
(pP13)  
Air Inlets  
Lamp Cover (pP38)  
Lens Cap  
Exhaust Vent  
Rear Side/Top Surface  
Remote Sensor (pP13)  
To connect the power cord (pP20)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ENGLISH  
Light on (Red):  
Warning mode (pP37)  
Light on (Red):  
Standby mode  
WARNING  
LAMP  
Light on (Green):  
During projection  
Light on/Blinking (Orange):  
Blinking (Green):  
Image is temporarily hidden  
(pP21)  
Lamp warning (pP37)  
STANDBY/ON  
STANDBY/ON  
Blinking (Red):  
Cool Down mode (pP21)  
To turn on/off the power  
INPUT  
HIDE  
To hide the image temporarily (pP21)  
To switch input  
(pP20)  
MENU  
EXIT  
To return to the previous menu  
To select or confirm  
To display the menu  
(pP24)  
ENTER  
Bottom Surface  
Feet: The height (0 f 5 mm) can be adjusted by turning the foot.  
Air Inlets/Filter (pP41)  
To adjust the position of the image (pP19)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Getting Started  
Controls and Features (Continued)  
Remote Control  
........  
........  
ON  
OFF  
OPERATE  
To turn on the power  
To turn off the power  
HDMI 1  
HDMI 2  
COMP.  
Select input mode (pP20)  
VIDEO  
S-VIDEO  
ASPECT  
To set the screen size  
(pP22)  
CINEMA  
NATURAL  
DYNAMIC  
C
N
D
To switch image profile  
(pP32)  
To set gamma  
(pP32)  
USER  
1
USER  
2
USER  
3
COLOR  
+
SHARP  
+
GAMMA  
To adjust color density  
To adjust the outline of the image  
(pP32)  
(pP32)  
COLOR  
SHARP  
COLOR  
TEMP  
To set color temperature  
BRIGHT  
CONTRAST  
(pP32)  
INFO  
HIDE  
To adjust contrast  
To adjust brightness  
(pP32)  
(pP32)  
To display information  
To hide the image temporarily  
(pP21)  
MENU  
EXIT  
To return to the previous menu  
To display the menu  
(pP24)  
ENTER  
To illuminate buttons on the remote control  
To select or confirm  
To display test patterns  
TEST  
LIGHT  
PROJECTOR  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
How to Use the Remote Control  
Loading Batteries  
1
2
3
zIf the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. When this  
happens, replace the batteries. Insert the batteries according to the +- marks.  
zBe sure to insert the - end first.  
zIf an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again and  
operate the remote control.  
Effective Range of Remote Control Unit  
When directing the remote control  
toward this unit  
This unit  
30°  
zWhen aiming the remote control towards the  
remote sensor on this unit, ensure that the  
distance to the sensor in front or at the rear of  
this unit is within 7 m.  
30°  
20°  
20°  
zIf the remote control fails to work properly,  
move closer to this unit.  
Remote Control  
When reflecting off a screen  
zEnsure that total of distance A between this  
unit and screen and distance B between  
remote control and screen is within 7 m.  
zAs the efficiency of signals reflected from the  
remote control unit differ with the type of  
screen used, operable distance may  
decrease.  
30°  
30°  
This unit  
20°  
20°  
A
B
.
.
.
O
N
....  
TE  
ERA  
... OP  
.
.....  
F
OF  
MP  
CO  
2
MI  
HD  
1
MI  
HD  
CT  
PE  
AS  
Screen  
IC  
D
IDEO  
NAM  
S-V  
D
Y
L
URA  
EO  
VID  
N
A
T
A
EM  
CIN  
N
C
US  
ER  
3
ER  
2
US  
ER  
US  
A
MM  
1
GA  
P
AR  
SH  
+
OR  
+
R
LO  
C
OL  
CO MP  
TE  
P
AR  
SH  
HT  
IG  
R
LO  
BR  
CO  
ST  
RA  
NT  
CO  
IN  
FO  
E
HID  
IT  
EX  
NU  
ME  
ER  
ENT  
HT  
LIG  
T
TES  
Remote Control  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
2
Preparation  
Selecting Connecting Devices  
zDo not turn on the power until connection is complete.  
zThe connection procedures differ according to the device used. For details, refer to the instruction manual of the device to be  
connected.  
zFor audio output, connect the device to an amplifier.  
zThe images may not be displayed depending on the devices and cables to be connected.  
Use an HDMI compliant cable (sold separately) with the HDMI logo.  
zIt may not be possible to connect to this unit depending on the dimension of the connector cover of the cables to be  
connected.  
DVD Recorder  
DVD Player  
To connect via HDMI terminal (pP16)  
To connect RS-232C terminal  
To connect via component video terminals (pP16)  
COMPONENT  
To connect via video terminal (pP15)  
To connect via S-video terminal (pP15)  
VCR  
Camcorder  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
ENGLISH  
Connecting  
Connecting via Video Cable  
This unit  
HD
RS232C  
MPONENT  
VCR and camcorder  
SVIDEO  
Y
G
C
B/PB  
B
C
R/PR  
R
Video cable (sold separately)  
Video output  
To video input terminal  
Connecting via S-video Cable  
This unit  
HD
RS232C  
MPONENT  
VCR and camcorder  
VIDEO  
SYNC  
Y
G
C
B/PB  
B
C
R/PR  
R
S-video cable (sold separately)  
S-video output  
To S-video input terminal  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
2
Preparation  
Connecting (Continued)  
Connecting via HDMI Cable Or HDMI-DVI Conversion Cable  
This unit  
HDMI-DVI conversion cable (sold separately)  
DVI output terminal  
DVD recorder  
RS232C  
COMPONENT  
SVIDEO  
O  
C  
Y
G
C
B/PB  
B
C
R/PR  
R
HDMI output terminal  
HDMI cable (sold separately)  
To HDMI 1 or HDMI 2 input terminal  
Connecting via Component Video Cable  
This unit  
DVD player  
HD  
RS232C  
MPONENT  
SVIDEO  
VIDEO  
SYNC  
Component video output terminals  
C /P (Red)  
Component video cable  
(sold separately)  
R
R
C /P (Blue)  
B
B
To component video input terminals  
Y (Green)  
zSet “COMP” in the setting menu to “Y Pb/Cb Pr/Cr”. (pP28 - Q)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
ENGLISH  
Connecting via SCART-RCA Cable  
This unit  
HD  
RS232C  
MPONENT  
S-VIDEO  
DVD player for European market  
SCART-RCA cable  
(sold separately)  
SCART terminal  
To RGB video and sync signal input terminals  
zSet “COMP” in the setting menu to “SCART”. (pP28 - Q)  
Connecting via RGB Video Cable  
This unit  
HD  
RS232C  
MPONENT  
Device equipped with RGB output  
S-VIDEO  
VIDEO  
SYNC  
RGB video output terminals  
R (Red)  
RGB video cable  
(sold separately)  
B (Blue)  
To RGB video input terminals  
G (Green) (Includes sync signal)  
zSet “COMP” in the setting menu to “RGB”. (pP28 - Q)  
zFor information on compatible input signals, see “Specifications”. (pP49)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2
Preparation  
Installing the Projector and Screen  
Install this unit and the screen. Place this unit and the screen perpendicular to each other.  
Failing to do so may give rise to trapezoidal distortion of the projected image.  
A Install the projector and screen  
Left/Right position  
*0 % up/down position (center)  
Approximately 34 % (maximum) of the projected image  
(Turn the dial to the right for maximum)  
Approximately 34 % (maximum) of the projected image  
(Turn the dial to the left for maximum)  
Up/Down position  
*0 % left/right position (center)  
Approximately 80 % (maximum) of the projected image  
(Turn the dial to the left for maximum)  
Approximately 80 % (maximum) of the projected image  
(Turn the dial to the right for maximum)  
Shifting range of projected image  
80%  
34%  
34%  
MDMI  
2
MDMI  
1
RS-232C  
COMPONENT  
S-VIDEO  
VIDEO  
SYNC  
Y
G
C
B/PB  
B
C
R/PR  
R
80%  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ENGLISH  
B Adjust such that the projected image is in the center of the screen  
Moves the image to the  
left or right  
Moves the image up or  
down  
TIPS  
zAdjustment can be done easily by moving the image  
upwards towards the center.  
zIt may be necessary to set “Pixel Adjust” in the setting menu after adjusting the image position. (pP27 - J)  
Screen Size and Projection Distance  
Determine the distance from the lens to the screen to achieve your desired screen size.  
This unit uses a 2.0x manual zoom lens for projection.  
Relationship Between Projection Screen Size and Projection Distance  
Projection Screen  
Size  
Projection Screen  
Size  
Approximate Projection Distance  
Approximate Projection Distance  
(Diagonal Length)  
Aspect Ratio 16:9  
W (Wide) f T (Tele)  
(Diagonal Length)  
Aspect Ratio 16:9  
W (Wide) f T (Tele)  
60"  
Approx.  
1.78 m  
Approx.  
3.63 m  
140"  
(Approx. 3.56 m)  
Approx.  
4.24 m  
Approx.  
8.54 m  
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
(Approx. 1.52 m)  
70"  
Approx.  
2.09 m  
Approx.  
4.24 m  
150"  
(Approx. 3.81 m)  
Approx.  
4.55 m  
Approx.  
9.16 m  
(Approx. 1.78 m)  
80"  
Approx.  
2.40 m  
Approx.  
4.86 m  
160"  
(Approx. 4.06 m)  
Approx.  
4.86 m  
Approx.  
9.77 m  
(Approx. 2.03 m)  
90"  
Approx.  
2.71 m  
Approx.  
5.47 m  
170"  
(Approx. 4.32 m)  
Approx.  
5.16 m  
Approx.  
10.38 m  
(Approx. 2.29 m)  
100"  
(Approx. 2.54 m)  
Approx.  
3.01 m  
Approx.  
6.08 m  
180"  
(Approx. 4.57 m)  
Approx.  
5.47 m  
Approx.  
11.00 m  
110"  
(Approx. 2.79 m)  
Approx.  
3.32 m  
Approx.  
6.70 m  
190"  
(Approx. 4.83 m)  
Approx.  
5.78 m  
Approx.  
11.61 m  
120"  
(Approx.3.05 m)  
Approx.  
3.63 m  
Approx.  
7.31 m  
200"  
(Approx. 5.08 m)  
Approx.  
6.08 m  
Approx.  
12.23 m  
130"  
(Approx. 3.30 m)  
Approx.  
3.93 m  
Approx.  
7.93 m  
zThe projection distances in the table are provided only as a guide. Use them as a reference during installation.  
zTo adjust the installation, use a projected image of aspect ratio 16:9.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Basic Operation  
Projecting Image  
This section describes the basic operations to project input images on the screen.  
Preparation  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
zRemove the lens cap.  
........  
........  
ON  
OFF  
OPERATE  
A Insert the power plug to the power outlet  
HDMI 1  
HDMI 2  
COMP.  
A Connect to this unit  
VIDEO  
S-VIDEO  
ASPECT  
B Connect to the power outlet  
A STANDBY/ON  
CINEMA  
NATURAL  
DYNAMIC  
C
N
D
USER  
1
USER  
2
USER  
3
Light on (Red)  
A
Power Cord  
(Supplied)  
B
COLOR  
+
SHARP  
+
GAMMA  
COLOR  
SHARP  
COLOR  
TEMP  
BRIGHT  
CONTRAST  
INFO  
HIDE  
B Turn on the power  
ON  
MENU  
EXIT  
A STANDBY/ON  
Light on (Green)  
ENTER  
zYou can also press the [STANDBY/ON] button on the unit to turn on the  
power. (pP11)  
TEST  
LIGHT  
C Project the image  
a Select input mode  
HDMI 1  
HDMI 2  
COMP.  
VIDEO  
S-VIDEO  
PROJECTOR  
zYou can also select the input mode by pressing the [INPUT] button on  
the unit. (pP11)  
b Play back the selected device  
WARNING  
LAMP  
D Adjust the position of the projection screen  
STANDBY/ON  
zSee “Installing the Projector and Screen” for procedures on adjusting the  
position. (pP18)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
ENGLISH  
E Adjust the image size (zoom)  
TIPS  
You can hide the image  
Smaller  
Bigger  
temporarily  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
You can hide the image temporarily.  
Hold and rotate the tab  
A STANDBY/ON  
HIDE  
F Adjust the focus  
Green light blinks when  
the image is hidden  
zPress the [HIDE] button again to  
display image.  
Turn the ring and adjust  
zThe power cannot be turned off  
when the image is temporarily  
hidden.  
G Turn off the power  
OFF  
MEMO  
While a confirmation screen is displayed  
About Cool Down mode  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
zThe Cool Down mode is a function  
to cool down the lamp for  
OFF  
approximately 60 seconds after  
projection is complete.  
This function prevents the internal  
parts of the unit from deformation  
or damage due to overheating of  
the lamp. It also prevents lamp  
blowout and premature shortening  
of lamp life.  
A STANDBY/ON  
Blinking (Red)  
zDuring Cool Down mode, the  
[STANDBY/ON] indicator blinks in  
red.  
Cool Down mode  
zAfter the Cool Down mode is  
complete, the unit automatically  
returns to standby mode.  
A STANDBY/ON  
Light on (Red)  
zDo not pull out the power plug  
during Cool Down mode. This may  
shorten the lamp life and cause a  
malfunction.  
zThe power cannot be turned off within approximately 90 seconds after it  
has been turned on. Start operation only after 90 seconds time.  
zYou can also press the [STANDBY/ON] button on the unit to turn off the  
power. (pP11)  
zPut back the lens cap after use to prevent the lens from dirt.  
zPull out the power plug when the unit will not be used for a prolonged time.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Basic Operation  
Convenient Features during Projection  
You can change the screen size of the projected image or hide the surrounding area of an image for which  
quality at the outer area has deteriorated.  
Setting the Screen Size  
The projected image can be set to a most appropriate screen size (aspect  
ratio).  
........  
........  
ON  
OFF  
OPERATE  
ASPECT  
4:3  
16:9 ZOOM  
HDMI 1  
HDMI 2  
COMP.  
zThe screen size can also be set from “Aspect” of the setting menu. (pP29 - S)  
zWhen high definition images are input, the screen size is fixed at “16:9”.  
VIDEO  
S-VIDEO  
ASPECT  
CINEMA  
NATURAL  
DYNAMIC  
Input Image and Projected Image by Different Screen Size Settings  
C
N
D
Screen Size  
Input Image  
USER  
1
USER  
2
USER  
3
4:3  
16:9  
Zoom  
COLOR  
+
SHARP  
+
GAMMA  
COLOR  
SHARP  
COLOR  
TEMP  
BRIGHT  
CONTRAST  
INFO  
HIDE  
SDTV(4:3)  
Aspect Ratio: Same  
Most appropriate  
screen size  
Aspect Ratio:  
Landscape  
Image is stretched  
horizontally  
Aspect Ratio: Same  
Top and bottom of the  
image are missing  
MENU  
EXIT  
ENTER  
SDTV(4:3)  
Image recorded in  
landscape (black  
bands on top and  
bottom) of DVD  
software  
Aspect Ratio: Same  
Small image is  
projected  
Aspect Ratio:  
Landscape  
Image is stretched  
horizontally  
Aspect Ratio: Same  
Most appropriate  
screen size  
TEST  
LIGHT  
zDepending on the input image, selecting “4:3” may result in a vertically stretched  
image while selecting “16:9” provides you with the most appropriate screen size.  
PROJECTOR  
Masking the Surrounding Area of an Image  
Images for which quality at the outer area has deteriorated can be projected  
by masking (hiding) the surrounding area of the projected image.  
A Project the image  
iImage for which quality at the outer  
area has deteriorated.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
ENGLISH  
B Mask the image  
a Display the setting menu  
MEMO  
Setup  
Source  
Install.  
Func.  
Info.  
Image  
zMasking is available only when high  
definition images are input.  
Image Adjust  
Color Temp.  
Gamma  
MENU  
Offset  
Pixel Adjust  
b Select “Setup” g “Mask”  
Image  
Setup  
Source  
Install.  
Func.  
Info.  
ASELECT  
2.5%  
Image Profile  
5%  
Off  
Profile Memory  
Picture Position  
HDMI Input Level  
ENTER  
Mask  
BCONFIRM  
Overscan  
c Set a mask value  
Image  
Setup  
Source  
Install.  
Func.  
Info.  
ASELECT  
2.5%  
Image Profile  
5%  
Profile Memory  
Picture Position  
HDMI Input Level  
ENTER  
Off  
Mask  
BCONFIRM  
Overscan  
Example:  
When the “Mask” value is changed  
from “Off” g “5%”  
C To end  
MENU  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Settings  
Setting Menu  
Projected images can be adjusted to a desired view by changing the default settings.  
Procedures for Menu Operation  
Example:  
When changing “Aspect” from “4:3” to “16:9”  
........  
........  
ON  
OFF  
OPERATE  
A Display the setting menu  
HDMI 1  
HDMI 2  
COMP.  
Setup  
Source  
Install.  
Func.  
Info.  
Image  
VIDEO  
S-VIDEO  
ASPECT  
Image Adjust  
Color Temp.  
Gamma  
CINEMA  
NATURAL  
DYNAMIC  
MENU  
C
N
D
Offset  
Pixel Adjust  
USER  
1
USER  
2
USER  
3
COLOR  
+
SHARP  
+
GAMMA  
COLOR  
SHARP  
COLOR  
TEMP  
B Select “Source” g “Aspect”  
BRIGHT  
CONTRAST  
INFO  
HIDE  
Image  
Setup  
Source  
4:3  
Install.  
Func.  
Info.  
ASELECT  
COMP  
16:9  
Zoom  
HDMI  
ENTER  
Aspect  
Film Mode  
Color System  
Black Level  
MENU  
EXIT  
BCONFIRM  
ENTER  
C Set to “16:9”  
TEST  
LIGHT  
Image  
Setup  
Source  
Install.  
Func.  
Info.  
ASELECT  
4:3  
COMP  
HDMI  
16:9  
ENTER  
Zoom  
Aspect  
Film Mode  
Color System  
Black Level  
BCONFIRM  
PROJECTOR  
D To end  
MENU  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
ENGLISH  
Setting Menu  
Item values shown in  
are factory settings.  
zItems that can be configured differ according to the input signals.  
Image > Image Adjust  
A Contrast  
Adjusts the contrast of the projected image.  
(Black) b50 f 50 (White)  
B Brightness  
Adjusts the brightness of the projected image.  
(Darken) b30 f 30 (Brighten)  
C Color  
Adjusts the color density of the projected image.  
(Lighten) b50 f 50 (Darken)  
D Tint  
Adjusts the hue of the projected image.  
(Red) b30 f 30 (Green)  
E Sharpness  
Adjusts the outline of the projected image.  
(Soft) b30 f 30 (Sharp)  
F DNR  
Adjusts the strength of noise removal of the projected image.  
(Weak) 0 f 30 (Strong)  
z“Contrast”, “Brightness”, “Color” and “Sharpness” can also be configured from the remote control. (pP12)  
z“Tint” can only be adjusted when NTSC signals are input to the video or S-video input terminal.  
Image > Color Temp.  
G Color Temp.  
Sets the color temperature of the projected image.  
Low  
Select this to give a reddish tinge to the image.  
Select this to have a balanced image.  
Middle  
High  
Select this to give a bluish tinge to the image.  
Red  
(Less red) b255 f 0 (More red)  
(Less green) b255 f 0 (More green)  
(Less blue) b255 f 0 (More blue)  
(Less red) b255 f 0 (More red)  
(Less green) b255 f 0 (More green)  
(Less blue) b255 f 0 (More blue)  
Memory10  
Memory20  
Green  
Blue  
Red  
Green  
Blue  
* The red, green and blue colors can be adjusted and registered respectively.  
zThis setting can also be configured from the remote control. (pP12)  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4
Settings  
Setting Menu (Continued)  
Image > Gamma  
H Gamma  
Sets the gradation characteristics of the projected image.  
Normal  
For normal circumstances, select this setting.  
Theater1  
Theater2  
Dynamic  
Sets gamma to “Theater1”.  
Sets gamma to “Theater2”.  
Select this when in well-lighted areas (such as living room) or when playing games.  
The gamma can be set according to your preferences.  
Custom  
(Gamma Setup)  
Correction Value  
The coefficient (1.8 f 2.6) of the gamma curve can be selected.  
The gamma curve for the colors (R, G, B) can be adjusted  
separately.  
Adjusting “W” will adjust for all “R, G, B” values. Gamma curves  
are represented by a “G”.  
Gamma Adjust *  
Save  
Load  
Saves the adjusted gamma data.  
Loads the gamma data that was saved.  
Returns the gamma coefficients to the values set by “Correction  
Value”.  
All Reset  
z“Normal” is suitable for normal circumstances but other settings can be selected according to your preferences.  
zThis setting can also be configured from the remote control. (pP12)  
*“Gamma Adjust”  
A Select the reference gamma curve coefficient (1.8 f 2.6) in “Correction Value”.  
B Select the color to be adjusted in the gamma adjustment screen.  
Correction Value  
Gamma Adjust  
Save  
W
R
G
Load  
B
All Reset  
C Adjust the gamma curve in the gamma curve adjustment screen.  
1023  
512  
1023  
Correction Value  
Gamma Adjust  
Save  
Correction Value  
Gamma Adjust  
Save  
512  
Load  
Load  
All Reset  
All Reset  
Adjustment Point (R)  
Adjustment Point (R)  
X:  
Y:  
5
51  
%
X:  
Y:  
5
51  
%
0
50  
100 (%)  
0
50  
100 (%)  
Select the point where the gradation (brightness) is to  
Adjust the gradation (brightness) with the  
be adjusted with the H / I buttons.  
J / K buttons.  
D To end  
Do you save gamma data?  
Yes : Push [ENTER] button  
EXIT  
EXIT  
EXIT  
ENTER  
No : Push [EXIT] button  
z If gamma curve is adjusted repeatedly, calculation errors will be accumulated and the gamma curve may not be able to  
revert back to its original form. In that case, select the coefficient in “Correction Value” again or retrieve the previous gamma  
data using “Load”.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
Image > Offset  
I Offset  
Adjusts the respective brightness of the red, green and blue colors in dark image areas. (Offset level)  
Red  
(Less red) b60 f 60 (More red)  
(Less green) b60 f 60 (More green)  
(Less blue) b60 f 60 (More blue)  
Green  
Blue  
Image > Pixel Adjust  
J Pixel Adjust  
Makes fine adjustments of 1 pixel unit for each minor color shift in the horizontal/vertical direction of the image.  
Horiz. Red  
Horiz. Green  
Horiz. Blue  
Vert. Red  
(Moves red to left) 1 f 7 (Moves red to right)  
(Moves green to left) 1 f 7 (Moves green to right)  
(Moves blue to left) 1 f 7 (Moves blue to right)  
(Moves red down) 1 f 5 (Moves red up)  
Vert. Green  
Vert. Blue  
(Moves green down) 1 f 5 (Moves green up)  
(Moves blue down) 1 f 5 (Moves blue up)  
zThe horizontal and vertical directions are reversed when the image is flipped to the left or right, or flipped up or down.  
zTo adjust, use still images with distinct outlines.  
zAs the adjustments are minor, the effect may be difficult to see for some images.  
Setup > Image Profile  
K Image Profile  
Configures the image profile. (pP32)  
Cinema  
Natural  
Dynamic  
User1  
Select this to view images with movie quality in a dark room.  
Select this to view projected images with quality as-is in a dark room.  
Select this to view images with clear quality in a bright room.  
Selects image profile registered in “User1”.  
User2  
Selects image profile registered in “User2”.  
User3  
Selects image profile registered in “User3”.  
zThis setting can also be configured from the remote control. (pP12)  
Setup > Profile Memory  
L Profile Memory  
Registers or deletes image profiles.  
Save User1  
Save User2  
Save User3  
Clear User1  
Clear User2  
Clear User3  
Reset Cinema  
Reset Natural  
Reset Dynamic  
Registers image profile in “User1”.  
Registers image profile in “User2”.  
Registers image profile in “User3”.  
Returns image profile in “User1” to factory setting (natural).  
Returns image profile in “User2” to factory setting (natural).  
Returns image profile in “User3” to factory setting (natural).  
Returns image profile in “Cinema” to factory setting.  
Returns image profile in “Natural” to factory setting.  
Returns image profile in “Dynamic” to factory setting.  
z“Contrast”, “Brightness”, “Color”, “Sharpness”, “DNR”, “Color Temp.”, “Gamma” and “Offset” are registered in “Image Profile”.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Settings  
Setting Menu (Continued)  
Setup > Picture Position  
M Picture Position  
Adjusts the horizontal/vertical position of the projected image.  
zThe display position value varies with the input signal.  
zThis adjustment is available only for analog input signals.  
Setup > HDMI Input Level  
N HDMI Input Level  
Configures the input level setting of the HDMI input terminal.  
Standard  
For normal circumstances, select this setting.  
Select this setting when the black-and-white of the projected image is unclear when  
RGB video signals are input from DVI devices.  
Enhanced  
zThis setting is available only when projecting the HDMI input.  
Setup > Mask  
O Mask  
Masks (Hides) the outer area of the projected image.  
2.5%  
5%  
Masks 2.5 % of the screen.  
Masks 5 % of the screen.  
No masking.  
Off  
zMasking is available only when high definition images are input.  
Setup > Overscan  
P Overscan  
Selects whether or not to set overscan for the 4:3 video signals (NTSC, PAL, SECAM, 480i, 576i, 480p and 576p).  
Off  
On  
No overscan.  
Overscans the top, left, bottom and right at 2.5 % each.  
Source > COMP  
Q COMP  
Configures the input signals of the component video input terminals.  
Y Pb/Cb Pr/Cr  
RGB  
Select this when component video signals are input.  
Select this when RGB video signals are input.  
Select this when RGB video signals and sync signals are input from SCART plug for  
European market.  
SCART  
zThis setting is available only when projecting the component video input.  
Source > HDMI  
R HDMI  
Configures the input signals of the HDMI input terminal.  
Auto  
Automatically configures input signals.  
YCbCr(4:4:4)  
YCbCr(4:2:2)  
RGB  
Select this when Y Cb Cr (4:4:4) video signals are input.  
Select this when Y Cb Cr (4:2:2) video signals are input.  
Select this when RGB video signals are input.  
zThis setting is available only when projecting the HDMI input.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
Source > Aspect  
S Aspect  
Configures the screen size (aspect ratio) of the projected image.  
4:3  
Sets screen size of the projected image to 4:3.  
16:9  
Zoom  
Sets screen size of the projected image to 16:9.  
Zooms the image.  
zWhen high definition images are input, the screen size is fixed at “16:9”.  
zThis setting can also be configured from the remote control. (pP12, 22)  
Source > Film Mode  
T Film Mode  
Select this to view movies shot on film.  
Auto  
Off  
For normal circumstances, select this setting.  
Select this when you are not watching movies shot on film.  
Source > Color System  
U Color System  
Configures the color system.  
Auto  
Configures the color system automatically.  
Select this when the color system is NTSC.  
Select this when the color system is NTSC4.43.  
Select this when the color system is PAL.  
Select this when the color system is PAL-M.  
Select this when the color system is PAL-N.  
Select this when the color system is SECAM.  
NTSC  
NTSC4.43  
PAL  
PAL-M  
PAL-N  
SECAM  
zThis setting is available only when projecting the video or S-video input.  
Source > Black Level  
V Black Level  
Configures the black level.  
Select this when the gradation of the dark portions of an image is indistinct with the  
7.5 % setting.  
0 %  
7.5 %  
Select this when the dark portions of an image appear washed out with the 0 % setting.  
zThis setting can only be adjusted when NTSC signals are input to the video or S-video input terminal.  
Install. > Menu Position  
W Menu Position  
Sets the display position of the menu.  
Upper left  
Displays menu on the upper left of the screen.  
Displays menu on the upper center of the screen.  
Displays menu on the upper right of the screen.  
Displays menu on the left center of the screen.  
Displays menu on the center of the screen.  
Displays menu on the right center of the screen.  
Displays menu on the lower left of the screen.  
Displays menu on the lower center of the screen.  
Displays menu on the lower right of the screen.  
Upper center  
Upper right  
Left center  
Center  
Right center  
Lower left  
Lower center  
Lower right  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Settings  
Setting Menu (Continued)  
Install. > Menu Display  
X Menu Display  
Sets the duration for displaying the menu.  
15 sec  
On  
Displays for 15 seconds.  
Always display.  
Install. > Line Display  
a Line Display  
Sets whether to display the input when switching input.  
5 sec  
Off  
Displays for 5 seconds.  
Do not display.  
Install. > Flip H  
b Flip H  
Select this when the image is projected from the back of the screen or when the projector is hung from the ceiling.  
On  
Off  
Flips image to the left or right.  
Do not flip image to the left or right.  
Install. > Flip V  
c Flip V  
Select this when the projector is hung from the ceiling.  
On  
Off  
Flips image up or down.  
Do not flip image up or down.  
Install. > High Altitude Mode  
d High Altitude Mode  
Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).  
On  
Off  
Activate.  
Do not activate.  
Func. > Back Color  
e Back Color  
Configures the screen color displayed when there is no input signal.  
Blue  
Sets screen color to “Blue”.  
Sets screen color to “Black”.  
Black  
Func. > Sleep Timer  
f Sleep Timer  
Sets the lapse time before automatically switching to the standby mode when there is no input signal.  
15  
30  
60  
Off  
Switch to standby mode after 15 minutes.  
Switch to standby mode after 30 minutes.  
Switch to standby mode after 60 minutes.  
Do not switch to standby mode.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
Func. > Logo  
g Logo  
Sets whether to display “Logo” during startup.  
Off  
On  
Do not display.  
Displays for 5 seconds.  
Func. > Lamp Power  
h Lamp Power  
Configures the output of the light-source lamp.  
Normal  
High  
For normal circumstances, select this setting. (170 W)  
Select this when it is difficult to see the image in a bright room. (200 W)  
zChanging the lamp power will not change the lamp time (lamp life).  
zThe setting cannot be changed within approximately 90 seconds after this unit has been turned on.  
zSettings cannot be changed within approximately 60 seconds after they are made.  
Func. > Test Pattern  
i Test Pattern  
Displays 6 types of test patterns.  
zThis can also be displayed from the remote control. (pP12)  
Func. > Language  
j Language  
Sets the language of the menu display.  
日本語  
Japanese  
English  
English  
Deutsch  
Español  
Italiano  
Français  
Português  
Nederlands  
Svenska  
Norsk  
German  
Spanish  
Italian  
French  
Portuguese  
Dutch  
Swedish  
Norwegian  
Chinese (Simplified)  
中文  
Info.  
k Input  
Displays the currently selected video input.  
l Format  
Displays the types of the current input video signals.  
m Lamp Time  
Displays the accumulated hours of usage of the light-source lamp.  
zThis can also be displayed from the remote control. (pP12)  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Settings  
Customizing Projected Images  
You can adjust the projected image to a desired image quality and register the adjusted value. (Image  
Profile) Besides the default “Cinema”, “Natural” and “Dynamic” settings, there are 3 more types of user-  
defined settings for image profile.  
Changing the Default Image Profile Values  
“Contrast”, “Brightness”, “Color”, “Sharpness”, “DNR”, “Color Temp.”, “Gamma” and  
“Offset” are registered in the image profile.  
........  
........  
ON  
OFF  
OPERATE  
A Select the image profile  
CINEMA NATURAL DYNAMIC  
HDMI 1  
HDMI 2  
COMP.  
C
N
D
VIDEO  
S-VIDEO  
ASPECT  
CINEMA  
NATURAL  
DYNAMIC  
C
N
D
B Adjust image quality  
USER  
1
USER  
2
USER  
3
Example: To adjust “Contrast”  
COLOR  
+
SHARP  
+
GAMMA  
a Display the setting menu  
COLOR  
SHARP  
COLOR  
TEMP  
MENU  
BRIGHT  
CONTRAST  
INFO  
HIDE  
b Select “Image” g “Image Adjust” g “Contrast”  
Image  
Setup  
Source  
Install.  
Func.  
Info.  
MENU  
EXIT  
SELECT  
Image Adjust  
Color Temp.  
Gamma  
Contrast  
Brightness  
Color  
0
0
0
4
0
0
ENTER  
ENTER  
Tint  
Offset  
Sharpness  
DNR  
Pixel Adjust  
TEST  
LIGHT  
c Adjust the setting  
ENTER  
Contrast  
0
ADJUST  
PROJECTOR  
d To end the adjustments  
EXIT  
C Other items can also be adjusted  
D To end  
z“Contrast”, “Brightness”, “Color”, “Sharpness”, “Color Temp.”  
and “Gamma” can also be adjusted from the remote control.  
(pP12)  
MENU  
zTo return to the default values, reset the registered settings  
with “Profile Memory” in the setting menu. (pP27 - L)  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
ENGLISH  
Registering User-defined Image Profiles  
A Select the image profile  
CAUTION  
USER  
1
USER  
2
USER  
3
zAdjustment settings of image  
quality will not be registered if other  
image profiles are selected before  
registering these settings.  
B Adjust image quality  
zSee “Changing the Default Image Profile Values” for procedures on  
adjusting the image quality. (pP32)  
C Register the image profile  
a Display the setting menu  
MENU  
b Select “Setup” g “Profile Memory”  
Image  
Setup  
Source  
Install.  
Func.  
Info.  
ASELECT  
Save User1  
Save User2  
Save User3  
Clear User1  
Clear User2  
Clear User3  
Reset Cinema  
Reset Natural  
Reset Dynamic  
Image Profile  
Profile Memory  
Picture Position  
HDMI Input Level  
Mask  
ENTER  
BCONFIRM  
c Register the setting  
Image  
Setup  
Source  
Install.  
Func.  
Info.  
ASELECT  
Save User1  
Save User2  
Save User3  
Clear User1  
Clear User2  
Clear User3  
Reset Cinema  
Reset Natural  
Reset Dynamic  
Image Profile  
Profile Memory  
Picture Position  
HDMI Input Level  
Mask  
ENTER  
BCONFIRM  
D To end  
MENU  
zTo return to the default values, reset the registered settings with “Profile  
Memory” in the setting menu. (pP27 - L)  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5
Troubleshooting  
Troubleshooting  
Before sending the unit to your authorized dealer for repair, check the following points.  
The following situations are not malfunctions.  
You do not need to worry under the following situations if there is no abnormality on the screen.  
zPart of the top surface or front of the unit is hot.  
zA creaking sound is heard from the unit.  
zAn operating sound is heard from the internal of the unit.  
Perform the following operations when the unit is unable to operate normally due to external static or noises.  
A When the unit is in standby mode, pull out the power plug, then insert again.  
B Press the power button on the unit to turn on the power again.  
A sound may be heard when the lamp is off but there is no danger.  
D-ILA device is manufactured using high-precision technology but there may be some missing pixels or pixels that remain  
permanently lit up.  
Power is not supplied  
Is the power cord disconnected?  
Insert the power cord (plug) firmly.  
pP20  
pP39  
Remove the power plug when the unit is in standby mode and  
close the lamp cover properly. After that, insert the plug  
again.  
Is the lamp cover properly shut?  
After the Cool Down mode is complete, turn on the power  
again.  
Is the lamp in Cool Down mode?  
pP21  
Projected image is dark  
Check the lamp time on the information menu. Prepare a new  
Is the lamp near exhaustion?  
lamp unit or replace as soon as possible when the lamp is near pP38f40  
exhaustion.  
The unit works when power is turned on but stops abruptly after a few minutes  
Are the air inlets and exhaust vent  
blocked?  
Remove the power plug when the unit is in standby mode and  
remove any blocking object. After that, insert the plug again.  
pP2, 10  
pP41  
Is the filter dirty?  
Clean the filter.  
Video image does not appear  
Is the lens cap removed?  
Remove the lens cap.  
pP20  
Is the correct external input selected?  
Is the AV device properly connected?  
Is the power of the AV device turned on?  
Select the correct external input.  
Connect the AV device properly.  
Turn on the power of the AV device and play the video.  
pP20  
pP14f17  
pP20  
Are the correct signals being output from  
the AV device?  
Set the AV device properly.  
pP14f17  
pP28 - Q  
pP28 - R  
Set “COMP” and “HDMI” in the setting menu according to the  
input signal.  
Is the setting of the input terminal correct?  
Is the video image temporarily hidden?  
Press the [HIDE] button to display the video image again.  
Adjust “Color” and “Tint” in the setting menu.  
pP21  
Color does not appear or looks strange  
Is the image correctly adjusted?  
pP25 - C D  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
ENGLISH  
Video image is fuzzy  
Is the focus correctly adjusted?  
Adjust accordingly using the focus adjustment ring.  
Set the unit at a correct distance from the screen.  
pP21  
Is the unit placed too near or too far away  
from the screen?  
pP18, 19  
Video images are missing  
Has setting been performed for screen  
mask?  
Set “Mask” in the setting menu to “Off”.  
pP23, 28 - O  
pP28 - M  
Alter the “Picture Position” value in the setting menu to ensure  
that images are not missing.  
Is the display out of position?  
Remote control does not work  
Are batteries installed correctly?  
Are batteries exhausted?  
Match the polarities (+ or -) correctly when inserting the  
batteries.  
pP13  
pP13  
pP13  
Replace with new batteries.  
Is there an obstructive object between the  
remote control and remote sensor?  
Remove any obstructive objects.  
Is the remote control held too far away  
from the unit?  
Hold the remote control closer to the sensor when using.  
Set “Sleep Timer” in the setting menu to “Off”.  
pP13  
Power is cut off suddenly  
Has setting been performed for sleep  
time?  
pP30 - f  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Troubleshooting  
What to Do When These Messages  
Are Displayed  
Message  
Cause (Details)  
No device is connected to the input terminal.  
COMP  
The input terminal is connected but there is no signal.  
No input  
gInput the video signals.  
A video signal that cannot be used in this unit has been input.  
gInput video signals that can be used.  
HDMI-2  
Out of range  
The message is displayed when the accumulated lamp time has exceeded  
1900 hours.  
Lamp replacement  
To clear the message, press the [EXIT] button.  
EXIT  
gGet ready a new lamp unit and replace as soon as possible.  
The message is displayed when the accumulated lamp time has exceeded  
2000 hours.  
Lamp replacement  
Warning  
The message is displayed each time during projection.  
To clear the message, press the [EXIT] button.  
EXIT  
gReplace with a new lamp unit and reset the lamp time. (pP38f40)  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ENGLISH  
About Warning Indicators  
The accumulated lamp time or warning mode of this unit is displayed by the indicators.  
For information on indicator display during normal operation, see “Controls and Features” (pP10).  
Indicator  
No.  
Content  
LAMP  
WARNING  
Lamp replacement is near (pP38 f 40)  
(When accumulated lamp time has exceeded 1900 hours)  
1
2
Light on  
b
Lamp has reached end of life (pP38 f 40)  
(When accumulated lamp time has exceeded 2000 hours)  
3
4
5
Lamp does not light up and unit is unable to project  
Lamp is turned off during projection  
Lamp cover is removed  
Blinking  
Light on  
There is an error in the circuit operation  
(Operation error in microcomputer circuit)  
6
7
There is an error in the circuit operation  
(Operation error in drive circuit)  
Internal temperature is abnormally high  
(Internal temperature error)  
8
b
Light on  
External temperature is high  
(External temperature error)  
9
Cooling fan has stopped  
(Fan locked)  
10  
Actions to Be Taken for Warning Mode  
When the unit enters into warning mode (No. 3 to 10), it will automatically stop projection and run the cooling fan for  
about 60 seconds.  
After the cooling fan has stopped, pull out the power plug from the power outlet.  
Then, follow the procedures below.  
No.  
3
Check  
Action  
zCheck that an impact shock has not occurred during  
operation.  
4
Turn on the power again.  
zCheck that the lamp unit and lamp cover are correctly  
installed.  
5
6
7
zCheck that nothing is blocking the air inlets.  
zCheck that the external temperature is normal.  
Leave the unit until it cools down.  
After that, turn on the power again.  
8
9
10  
If the warning indication is displayed again, wait for the cooling fan to stop. Then pull out the power plug from the power outlet.  
Call your authorized dealer for repair.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5
Troubleshooting  
Replacing the Lamp  
The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp unit.  
zWhen the lamp replacement time approaches, a message is displayed on the screen and the condition is indicated by the  
indicator. (pP36, 37)  
Procedure for Lamp Replacement  
CAUTION  
A Remove the lamp cover  
zPull the power plug from the power  
outlet. Failure to do so may cause  
zRemove the screws with a + screwdriver.  
injuries or electric shocks.  
zDo not replace the lamp  
immediately after the unit has been  
used. Allow a cooling period of 1  
hour or more before replacement.  
The temperature of the lamp is still  
high and this may cause a burn.  
zDo not apply shock to the lamp  
unit. It may cause lamp blowout.  
zDo not use flammable air duster to  
clean the internal parts of the unit.  
This may cause fire.  
B Loosen the screws on the lamp unit  
zLoosen the screws with a + screwdriver.  
MEMO  
Usable Lamp Life  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
zThe usable lamp life for this unit is  
approximately 2000 hours. The  
usable lamp life of 2000 hours is  
merely the average usable life of  
lamps and we do not provide any  
guarantee for this figure.  
zThe lamp life may not reach 2000  
hours depending on the operating  
conditions.  
zWhen the lamp has reached the  
end of its usable life, deterioration  
progresses rapidly.  
C Pull out the lamp unit  
zGrasp the handle and pull out the lamp unit.  
zIf the image is dark or the color  
tone is abnormal, replace the lamp  
unit as soon as possible.  
Purchasing the Lamp Unit  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Please consult your authorized  
dealer.  
Lamp Unit  
Part No. : BHL5009-S  
Handle  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
ENGLISH  
D Install the new lamp unit  
CAUTION  
zUse only genuine replacement  
parts for the lamp unit. Also, never  
attempt to re-use an old lamp unit.  
This may cause a malfunction.  
zDo not touch the surface of a new  
lamp. This may shorten the lamp  
life and cause lamp blowout.  
MEMO  
E Tighten the screws of the lamp unit  
After Replacing the Lamp  
zFasten the screws with a + screwdriver.  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
zDo not place the removed lamp  
unit at locations reachable by  
children or near combustible items.  
zDispose used lamp units in the  
same way as fluorescent lamps.  
Follow your local community rules  
for disposal.  
F Attach the lamp cover  
zInsert the top part (with 2 claws) of the lamp cover into the unit.  
zFasten the screws with a + screwdriver.  
Claws  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Troubleshooting  
Replacing the Lamp (Continued)  
Resetting Lamp Time  
........  
........  
ON  
OFF  
OPERATE  
After installing a new lamp unit, reset the lamp time.  
HDMI 1  
HDMI 2  
COMP.  
A Insert the power plug to the power outlet  
VIDEO  
S-VIDEO  
ASPECT  
CINEMA  
NATURAL  
DYNAMIC  
A STANDBY/ON  
Light on (Red)  
C
N
D
USER  
1
USER  
2
USER  
3
COLOR  
+
SHARP  
+
GAMMA  
COLOR  
SHARP  
COLOR  
TEMP  
BRIGHT  
CONTRAST  
B Reset lamp time  
INFO  
HIDE  
zPress in the order as shown.  
zPress each button within 2-second intervals and press the last button for 2  
seconds or more.  
MENU  
EXIT  
EXIT  
HIDE  
ENTER  
ENTER  
Press for 2 seconds or more  
TEST  
LIGHT  
zThe [LAMP] indicator and [STANDBY/ON] indicator blink alternately for 3  
seconds. After that, the unit switches to standby mode.  
WARNING  
LAMP  
STANDBY/ON  
CAUTION  
zReset the lamp time only when you  
have replaced the lamp.  
zNever reset it when the lamp is still  
in use. Otherwise, the approximate  
standard for gauging replacement  
time may be inaccurate and lamp  
blowout may occur.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ENGLISH  
Cleaning and Replacing the Filter  
Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur.  
A Remove the inner filter  
CAUTION  
Lift up while pushing the claw  
zPull the power plug from the power  
outlet.  
MEMO  
If the filter is damaged or too  
dirty to be cleaned  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
B Clean the filter  
zReplace with a new filter. A dirty  
filter will dirty the internal parts of  
the unit and cause shadows on the  
video image.  
zTo purchase a new filter or when  
there is dirt in the internal parts,  
consult your authorized dealer.  
Inner Filter  
Part No. : LC32058-002A  
zWash the filter with water and dry it in a shaded area.  
zIn extremely soiled cases, use of a neutral detergent is recommended.  
Put on rubber gloves when using a neutral detergent.  
zAfter washing the filter with water, make sure that it is completely dry before  
reinstalling. Otherwise, electric shocks or malfunctions may occur.  
zDo not clean the filter with a vacuum cleaner or air duster. The filter is soft  
and may be damaged.  
C Reinstall the inner filter  
Check that the left and right  
claws are locked onto the unit  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6
Others  
RS-232C Interface  
Control of this unit via a computer is possible by connecting the computer to this unit with a RS-232C cross  
cable (D-Sub 9 pin).  
RS-232C Specifications  
Pin No.  
Signal  
RxD  
Operation  
Receive data  
Transmit data  
Signal ground  
b
Signal Direction  
This unit  
2
This unit PC  
1
5
3
5
TxD  
This unit PC  
9
6
GND  
N/C  
b
b
1, 4, 6 b 9  
zPC refers to the controller such as a personal computer.  
Mode  
Non-synchronous  
Character Length  
Parity  
8 bit  
None  
D0 D1 D2 D3 D4 D5 D6 D7  
Start Bit  
1
Stop Bit  
1
Start Bit  
Stop Bit  
Data Rate  
Data Format  
19200 bps  
Binary  
Command Format  
The command between this unit and the computer consists of “Header”, “Unit ID”, “Command”, “Data” and “End”.  
zHeader (1 byte), Unit ID (2 bytes), Command (2 bytes), Data (n bytes), End (1 byte)  
Header  
This binary code indicates the start of communication.  
Binary code  
Type  
Description  
21  
3F  
40  
Operating command  
Reference command  
Response command  
PC This unit  
PC This unit  
This unit PC  
This unit PC  
06  
ACK  
(When the command is accepted without error, it returns to PC)  
Unit ID  
This code specifies the unit. The binary code is fixed at “8901”.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
ENGLISH  
Command and data  
Operating command and data (Binary code)  
Command  
Type  
Data description  
Checks whether communication is available between this unit and  
the PC during standby.  
0000  
Connection check  
During standby  
31 : Turns on the power.  
5057  
4950  
Power supply  
During power on  
30 : Turns off the power. (Standby mode)  
During power on  
30 : S-VIDEO  
31 : VIDEO  
32 : COMP.  
36 : HDMI 1  
37 : HDMI 2  
Input  
During power on  
30 : Switches to “Normal”.  
31 : Switches to “Theater1”.  
32 : Switches to “Theater2”.  
33 : Switches to “Dynamic”.  
34 : Switches to “Custom”.  
4754  
Gamma table  
30 : 1.8  
31 : 1.9  
32 : 2.0  
33 : 2.1  
34 : 2.2  
35 : 2.3  
36 : 2.4  
37 : 2.5  
38 : 2.6  
4750  
4752  
Gamma coefficient  
Gamma data (R)  
Sets the gradation (0 ~ 1023) of the output signal in hexadecimal.  
The data is 16 bit (2 byte) with the 2 byte data in the high/low order.  
4747  
4742  
Gamma data (G)  
Gamma data (B)  
Same as gamma data (R).  
Same as gamma data (R).  
During power on  
5453  
5243  
Test pattern  
30 : Do not display.  
36 : Displays staircase (gray).  
Sends the same code as the supplied remote control.  
Remote Control  
z“Remote control code” (pP45)  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Others  
RS-232C Interface (Continued)  
Reference command and data (Binary code)  
Command  
Type  
Data description  
During standby or power on  
30 : Standby mode  
5057  
Power supply  
31 : Power-on mode  
32 : During Cool Down mode  
34 : Warning mode  
During power on  
30 : S-VIDEO  
31 : VIDEO  
32 : COMP.  
36 : HDMI 1  
37 : HDMI 2  
4950  
Input  
During power on  
30 : “Normal”  
31 : “Theater1”  
32 : “Theater2”  
33 : “Dynamic”  
34 : “Custom”  
4754  
4750  
Gamma table  
30 : 1.8  
31 : 1.9  
32 : 2.0  
33 : 2.1  
34 : 2.2  
35 : 2.3  
36 : 2.4  
37 : 2.5  
38 : 2.6  
Gamma coefficient  
4752  
4747  
4742  
Gamma data (R)  
Gamma data (G)  
Gamma data (B)  
Gradation of the output signal (0 f 1023)  
Gradation of the output signal (0 f 1023)  
Gradation of the output signal (0 f 1023)  
During power on  
5453  
Test pattern  
30 : Do not display.  
36 : Staircase (gray).  
End  
This code indicates the end of communication. The binary code is fixed at “0A”.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
Remote control code  
zBinary code is sent during communication.  
Remote control button  
Remote control button  
name  
Binary code  
Binary code  
name  
J
37 33 30 31  
37 33 30 32  
37 33 30 33  
37 33 30 35  
37 33 30 36  
37 33 31 44  
37 33 32 45  
37 33 32 46  
37 33 33 34  
37 33 33 36  
37 33 34 42  
37 33 34 43  
37 33 34 44  
37 33 35 39  
37 33 36 39  
37 33 36 41  
37 33 36 42  
USER1  
USER2  
37 33 36 43  
37 33 36 44  
37 33 36 45  
37 33 37 30  
37 33 37 31  
37 33 37 34  
37 33 37 35  
37 33 37 36  
37 33 37 37  
37 33 37 38  
37 33 37 39  
37 33 37 41  
37 33 37 42  
37 33 37 43  
37 33 37 44  
37 33 37 45  
37 33 37 46  
K
EXIT  
USER3  
OPERATE ON  
OPERATE OFF  
HIDE  
HDMI 1  
HDMI 2  
INFO  
MENU  
ENTER  
I
GAMMA  
COLOR TEMP  
ASPECT  
H
CONTRAST (a)  
CONTRAST (b)  
BRIGHT (a)  
BRIGHT (b)  
COLOR (a)  
COLOR (b)  
SHARP (a)  
SHARP (b)  
VIDEO  
S-VIDEO  
COMP.  
TEST  
CINEMA  
NATURAL  
DYNAMIC  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Others  
RS-232C Communication Examples  
This section shows the communication examples of RS-232C.  
Operating command  
Type  
Command  
Description  
Checks connection  
PC This unit: 21 89 01 00 00 0A  
This unit PC: 06 89 01 00 00 0A  
Connection check  
PC This unit: 21 89 01 50 57 31 0A  
This unit PC: 06 89 01 50 57 0A  
Power (On)  
Power (Off)  
When power is turned on from standby mode  
PC This unit: 21 89 01 50 57 30 0A  
This unit PC: 06 89 01 50 57 0A  
When power is turned off (standby mode)  
from power-on mode  
PC This unit: 21 89 01 49 50 32 0A  
This unit PC: 06 89 01 49 50 0A  
Input (COMP.)  
When video input is set to component  
PC This unit: 21 89 01 52 43 37 33 32 45 0A  
This unit PC: 06 89 01 52 43 0A  
Remote Control  
(MENU)  
When the same operation as pressing the  
[MENU] button on the remote control is made  
Reference command  
Type  
Command  
Description  
PC This unit: 3F 89 01 50 57 0A  
This unit PC: 06 89 01 50 57 0A  
This unit PC: 40 89 01 50 57 31 0A  
When information on power-on mode is  
acquired  
Power (On)  
PC This unit: 3F 89 01 49 50 0A  
This unit PC: 06 89 01 49 50 0A  
This unit PC: 40 89 01 49 50 30 0A  
When information on S-VIDEO input is  
acquired  
Input (S-VIDEO)  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ENGLISH  
Copyright and Caution  
About Trademarks and Copyright  
zHDMI, HDMI logo and high definition multimedia interface  
are trademarks or registered trademarks of HDMI  
Licensing LCC.  
zThis product uses Ricoh TrueType fonts manufactured  
and sold by Ricoh Co., Ltd.  
Caution  
D-ILA Device Characteristics  
Maintenance Procedures  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Do not project still pictures or pictures that have still  
segments for a long period of time. The still parts of the  
picture may remain on the screen. This is a characteristic of  
D-ILA devices and not a malfunction. The picture will  
disappear over time.  
Dirt on the cabinet  
zGently clean dirt on the cabinet with a soft cloth. In the  
case of heavy soiling, soak a cloth in water, wring dry and  
wipe, followed by wiping again with a dry cloth.  
Pay attention to the following as the cabinet may  
deteriorate in condition or paint may come off.  
Do not wipe with thinner or benzene  
When Unit is Unused for a Long Time  
Do not spray volatile chemicals like insecticide  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Do not allow prolonged contact with rubber or plastic  
products  
Dirt in the air inlets  
Prolonged disuse of the unit may effect an error on the  
functions. Turn on the power occasionally and operate the  
unit.  
zUse a vacuum cleaner to suck up the dirt. Otherwise, use  
a cloth to wipe off the dirt. If dirt is allowed to accumulate  
in the air inlets, the internal temperature cannot be  
adjusted and this may cause a malfunction.  
Viewing Advice  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Looking at the screen continually for a prolonged time will  
cause your eyes to get tired. Allow your eyes to rest at  
intervals.  
Dirt on the lens  
zClean the dirt using commercial blowers or lens cleaning  
papers for cleaning glasses and cameras.  
Do not use fluid-type cleaning agents. This may lead to  
peeling of the surface coating film.  
Usage Environment  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
zAvoid direct exposure of screen to direct sunlight and  
illumination. Block light using a curtain. Images can be  
well projected by darkening the brightness of the room.  
zDo not use this unit in rooms with cigarette smoke or oily  
smoke. This may cause the unit to malfunction.  
Transporting this Unit  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Before transporting or shipping this unit, attach the buffer  
material on the top and bottom of the lens for protection.  
Failure to do so may subject the lens to shock causing  
damage.  
Attach the buffer material after adjusting the lens to the  
center position.  
Parts Replacement  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
This unit contains parts (optical part, cooling fan, etc.) that  
require replacement to maintain its functioning. The  
estimated time for parts replacement varies greatly  
depending on the usage and environment. Please consult  
your authorized dealer for replacement.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
6
Others  
Mounting this Unit  
Measures to prevent the unit from toppling or dropping should be taken for safety reasons and accident prevention  
during emergencies including earthquakes.  
When mounting this unit on a pedestal or ceiling, remove the 4 feet on the bottom surface and use all the 4 screw  
holes (M5 screws) to mount.  
Ceiling  
Bottom Surface  
4 locations  
Air inlets  
Precautions for Mounting  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
zSpecial expertise and techniques are required for  
mounting this unit. Be sure to ask your dealer or a  
specialist to perform mounting.  
zRegardless whether the unit is still under guarantee, JVC  
is not liable for any product damage caused by mounting  
the unit with non-JVC ceiling fittings or when the  
environment is not suitable for ceiling-mount.  
zDepth of the screw holes (screw length) is 30 mm. Use  
screws shorter than 30 mm but longer than 19 mm.  
zWhen using the unit hanging from a ceiling, pay attention  
to the surrounding temperature. When a heater is in use,  
temperature around the ceiling is higher than expected.  
Using other screws will result in malfunctioning or  
cause the unit to drop.  
zWhen mounting to a pedestal, ensure sufficient space  
(foot height of 21.5 mm or higher) around the unit so that  
the air inlets are not blocked.  
zDo not tilt this unit more than 5 degrees from side to side  
when using. This may result in uneven colors or shortening  
of lamp life.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ENGLISH  
Specifications  
Product Name  
D-ILA Projector  
DLA-RS1X  
Model Name  
D-ILA device 1 2 /  
Display Panel/Size  
0.7" (1920 pixels c1080 pixels) c 3 (Total no. of pixels: Approx. 6.22 million)  
2.0x manual zoom lens (1.4: 1 f 2.8: 1) (Zoom/Focus: Manual)  
200 W Ultra-high pressure mercury lamp [Part No.: BHL5009-S]  
Approx. 60" f 200" (Aspect ratio: 16:9)  
Projection Lens  
Light-source Lamp  
Screen Size  
Projection Distance  
Color System  
Approx. 1.8 m f 12.2 m  
NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM (Auto/Manual switch)  
480i, 480p, 576i, 576p, 720p/50 Hz, 720p/60 Hz, 1080i/50 Hz, 1080i/60 Hz  
Analog Video Input Format  
480i, 480p, 576i, 576p, 720p/50 Hz, 720p/60 Hz, 1080i/50 Hz, 1080i/60 Hz,  
1080p/24 Hz, 1080p/50 Hz, 1080p/60 Hz, VGA/60Hz  
Digital Video Input Format  
Resolution  
1920 dots c 1080 dots  
Input Terminals  
1-line, RCA pin jack c 1  
1.0 V(p-p), 75 &, synchronous  
Video Input  
(VIDEO)  
1-line, mini DIN 4 pin c 1  
Y: 1.0 V(p-p), 75 &  
S-video Input  
(S-VIDEO)  
C: 0.286 V(p-p), 75 & (NTSC); 0.3 V(p-p), 75 & (PAL)  
1-line, RCA pin jack c 3  
Y: 1.0 V(p-p), 75 &  
Component Video Input  
(COMPONENT)  
C /P , C /P : 0.7 V(p-p), 75 &  
B
B
R
R
HDMI Input  
(HDMI 1, HDMI 2)  
2-line, HDMI 19 pin c 2 (HDCP compliant) 3  
Power Requirements  
Power Consumption  
AC 110 V - 240 V 50/60 Hz  
280 W (Standby mode: 2.7 W)  
Temperature: 5 % f 35 %  
Operation Environment  
Humidity: 20 % f 80 % (No condensation)  
(Storage Temperature: b10 % f 60 %)  
Installation Height  
Below 5000 ft (Approx. 1524 m)  
455 mm c 172.5 mm c 418.5 mm  
(17 7/8" c 6 7/8" c 16 1/2")  
Dimensions (Width c Height c Depth)  
(Excluding lens and protrusion portion)  
Mass  
11.6 kg (25.5 lbs)  
(See Page 9)  
Accessories  
*1 D-ILA is the abbreviation for Direct drive Image Light Amplifier.  
*2 D-ILA devices are manufactured using extremely high-precision technology. Pixel effectiveness is 99.99 %. Only 0.01 % or less of the pixels  
are either missing or would remain permanently lit up.  
*3 HDCP is the abbreviation for High-bandwidth Digital Content Protection system.  
The image of HDMI input terminal may not be displayed due to HDCP specification change.  
Design and specifications are subject to change without prior notice.  
Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order to aid comprehension.  
Images may differ from the actual product.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6
Others  
Dimensions  
(Unit: mm)  
Top Surface  
Bottom Surface  
300  
81  
455  
Front  
Left Side  
227.5  
88.5  
245.5  
42  
Center of Lens  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
FOR SERVICING (Only in U.S.A.)  
Printed in Japan  
1207TTH-SW-VP  
© 2007 Victor Company of Japan, Limited  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intel Server TM700 User Manual
Jabra Headphones BT2080 User Manual
Jameco Electronics Automobile Electronics 545 User Manual
Jenn Air Microwave Oven JMV8186AA User Manual
Jwin Cordless Telephone JT P570 User Manual
Kenmore Clothes Dryer 1109787 User Manual
Kenmore Sewing Machine 38519005 User Manual
KitchenAid Dishwasher 8573754 User Manual
Kobe Range Hoods Ventilation Hood RA3830SQD User Manual
Kompernass Hot Beverage Maker KH 1142 User Manual