CU-VD50AA / AG
DVD Burner
INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
D Open the tray and insert the disc
• The tray cannot be opened/closed when the burner is off.
Caution
A Press the eject
B Pull out
completely.
C Insert firmly into
button.
place.
E Close the tray
• Push in until the tray snaps in.
F Open the LCD monitor
• The Everio camera turns on.
• The power lamp on the burner
changes from orange to green light.
An hourglass ( ) is displayed when
the burner is recognising the disc.
When completed, the following screen
appears.
6)$%/
#2%!4% &2/- !,,
3%,%#4 !.$ #2%!4%
0,!9"!#+
&).!,):%
3%,%#4
3%4
Pay attention to the following!
• Do not touch the
recording side
• Do not place any
objects on top
• Do not topple
• Do not subject to
mechanical shock
¹ Recording or playback may not function properly if the disc is scratched
or dirty.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Videos to a DVD
Operate on the Everio camera.
¹ Depending on the model connected, the on-screen display may differ from those
shown below.
Select
(move up-down)
Confirm
(push in)
A Select “CREATE FROM ALL”
D Select “Yes”
ALL SCENES
VIDEO
CREATE FROM ALL
SELECT AND CREATE
PLAYBACK
DO YOU WANT TO MAKE
AN AUTOMATIC HEADLINE ON
THE DISC TOP MENU?
FINALIZE
Yes
No
SELECT
SET
SELECT
SET
-%.5ꢀ TOP
E Select “EXECUTE”
B Select “ALL SCENES”
CREATE FROM ALL
ALL SCENES
ALL SCENES
ꢄꢅ
ꢁꢄꢄꢅ
UNSAVED SCENES
$6$ ꢁ
ꢁ
EXECUTE
CANCEL
SELECT
SET
-%.5ꢀ TOP
SELECT
SET
-%.5ꢀ TOP
C Select “OK”
F Press “OK”
ALL SCENES
ALL SCENES
QUANTITY REQUIRED
$6$ꢀ ꢁ ꢂ $6$ꢃ$, ꢀ
COMPLETED
ꢁ
PREPARE AN EMPTY DISC
OK
OK
RETURN
SELECT
SET
-%.5ꢀ TOP
SET
Copy completed!
• Do not turn off the power or remove the USB cable while the the hourglass or the
copy in progress screen is displayed.
You can also choose to copy your favourite scenes. For details, refer to
the instruction manual of the Everio camera.
Note
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Videos Stored on the DVD
A Connect this burner to the TV
Connect to the TV with
an Audio/Video cable.
TV
To power
supply outlet
Red
White
Yellow
To DC jack
Red
White
Yellow
Power lamp
Remove the USB cable
• For details, refer to “Connecting to the TV” (P.12, 13).
B Remove the USB cable
• The power lamp on the burner changes as follows.
Green ꢀ Blinking orange ꢀ Orange
• When the USB cable is removed, the playback navigator appears automatically.
(About 40 seconds.)
(Playback navigator screen on the TV)
1/2
• An unfinalised disc
Caution
cannot be played back
properly. Refer to the
01.06.2008 09:51
01.08.2008 13:42
01.06.2008 11:45
01.08.2008 15:15
01.06.2008 17:09
instruction manual of the
Everio camera and
finalise the disc.
01.08.2008 17:32
DIGEST PLAYBACK
C Use the selection keys on the remote control to select the video to
play back and press the ENTER button.
Playback begins!
• When the power lamp blinks slowly in red due to a drop in the burner’s interior
temperature, some functions will not work and there will be no image displayed on
the TV screen. Wait until the power lamp stops blinking in red before operating this
burner.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
This burner enables DVDs of videos
recorded with the JVC Hard Disk Camera to
be created without using a PC.
This unit applies to the standard “IEC60825-1:2001”
for laser products.
• If you want to edit videos recorded with the camera
and create your original DVDs, use the software
provided with the camera for editing and creating
DVDs.
The socket-outlet shall be installed near the
equipment and shall be easily accessible.
ATTENTION:
This unit contains microcomputers. External
electronic noise or interference could cause
malfunctioning. In such cases, switch the unit off and
unplug the mains power cord. Then plug it in again
and turn the unit on. Take out the disc. After checking
the disc, operate the unit as usual.
• A provided data writing software Power2Go 5.5 Lite
can be used for writing data. However, it cannot be
used to edit videos or create DVDs.
• The burner does not include support for Macintosh.
Dear Customer,
Thank you for purchasing this burner. Before use,
please read the safety information and precautions
contained in pages 6 and 7 to ensure safe use of this
product.
CAUTION:
To avoid electric shock or
damage to the unit, first firmly
insert the small end of the
power cord into the AC
Adapter until it is no longer
wobbly, and then plug the
Safety Precautions
IMPORTANT:
larger end of the power cord into an AC outlet.
In the event that any of the following occur, remove
the plug and make a request for repair to the dealer.
• Smoke or abnormal odour is emitted
• Damage from being dropped
The mains plug shall remain readily operable.
• Remove the mains plug immediately if the burner
functions abnormally.
• Water or an object enters inside
CAUTION:
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC dealer.
A UNIT IS A CLASS 1 LASER PRODUCT.
HOWEVER THIS UNIT USES A VISIBLE LASER
BEAM WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE SURE
TO OPERATE THE UNIT CORRECTLY AS
INSTRUCTED.
Caution on Replaceable lithium battery
The battery used in this device may present a fire or
chemical burn hazard if mistreated.
Do not recharge, disassemble, heat above 100 ؇C or
incinerate. Replace battery with Panasonic
(Matsushita Electric), Sanyo, Sony or Maxell
CR2025.
Danger of explosion or Risk of fire if the battery is
incorrectly replaced.
WHEN THIS UNIT IS PLUGGED INTO THE WALL
OUTLET, DO NOT PLACE YOUR EYES CLOSE TO
THE OPENING OF THE DISC TRAY AND OTHER
OPENINGS TO LOOK INTO THE INSIDE OF THIS
UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
• Dispose of used battery promptly.
• Keep away from children.
• Do not disassemble and do not dispose of in fire.
WARNING:
Batteries shall not be exposed to excessive heat such
as direct sunshine, fire or the like.
CLASS 1 LASER PRODUCT
REPRODUCTION OF LABELS
WARNING LABEL INSIDE OF THE UNIT
The C/B button does not completely shut off mains
power from the unit, but switches operating current
on and off. ABB shows electrical power standby and
ACB shows ON.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions for the Burner
Installation
Be sure to observe the following precautions. Failing to
do so may result in electric shock, fire, injury, or
malfunction.
Do not install in any of the following locations.
• Humid location
• Location of 60 °C or above
• Do not disassemble, dismantle, or modify the
equipment. Requests for repair and inspection should
be made to the dealer.
• Do not insert metal or combustible objects or pour
water or other liquids inside the burner.
• Location subject to direct sunlight
• Location where overheating is likely
• Dusty or smoky locations
• Locations subject to oily smoke or steam such as a
kitchen counter or beside a humidifier
• Unstable location
• Bathroom
• Dusty places
• Slanted location
• Turn off the power when connecting equipment.
• Remove the plug when the burner will not be used for
a prolonged time or prior to cleaning (electricity flows
through the equipment even when the power is off).
• Do not block the ventilation holes of the burner.
• Do not use where there is condensation. Suddenly
carrying the burner from a cold location to a hot
location may result in the formation of drops, which
may cause a malfunction or failure.
ATTENTION:
On placing the unit:
Some TVs or other appliances generate strong
magnetic fields. Do not place such appliances on top
of the unit as it may cause picture disturbance.
• Do not cause the burner to vibrate when discs are in.
When moving the product:
Safety Precautions for Accessories
Press C/B to turn off the power, and wait at least 30
seconds before unplugging the power cord. Then,
wait at least 2 minutes before moving the product.
• When using the AC adapter, the power cord, and the
USB cable, be sure to observe the following
precautions. Failing to do so may result in electric
shock, fire, injury, or malfunction.
• Do not insert or remove the plug when your hands are wet.
• Fully insert the plug into the outlet.
• Keep dust and metal objects away from the plug.
• Do not damage the cord.
• Place the cord where it will not trip someone up.
• Do not use when thunder can be heard.
• Do not dismantle.
• Do not use for any product other than this one.
• Do not play the provided CD-ROM with an audio
player. Doing so may damage the circuits or
speakers.
Safety Precautions for Discs
Do not use the following discs.
• Cracked discs
• Deeply scratched discs
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
zSafety Precautions .................................................................................................. 6
zGetting Started......................................................................................................... 9
Accessories ............................................................................................................... 9
Placing the Burner..................................................................................................... 9
zNames and Functions of Each Part ..................................................................... 10
Front and Top Panel................................................................................................ 10
Rear Panel............................................................................................................... 10
Remote Control ....................................................................................................... 11
zConnecting to the TV ............................................................................................ 12
Connecting to a TV with HDMI Input Terminal ........................................................ 12
Connecting to a TV with Component Video Input Connectors ................................ 13
zCopying Everio Video to a DVD ........................................................................... 14
Connecting to an Everio Camera ............................................................................ 14
Creating AVCHD Disc/Data Disc/DVD-Video.......................................................... 15
zCopying from PC to DVD ...................................................................................... 16
Connecting to a PC ................................................................................................. 16
Copying to a DVD.................................................................................................... 16
Computers That Can Be Used ................................................................................ 17
Installing CyberLink Power2Go 5.5 Lite .................................................................. 18
CyberLink Power2Go 5.5 Lite Contact Information ................................................. 20
zFolder Configuration............................................................................................. 21
When Creating and Storing Desired Folders and Files on a PC ............................. 22
zPlaying Images Stored on the DVD...................................................................... 23
Viewing Images Copied from the High Definition Everio......................................... 23
Viewing DVD-Video Copied from Everio ................................................................. 27
zChanging the Playback Settings.......................................................................... 29
zOperate in Conjunction with TV via HDMI........................................................... 31
zViewing High Quality Images ............................................................................... 33
zSettings Menu........................................................................................................ 34
Menu Operation Procedures ................................................................................... 34
Settings Menu Items and Descriptions.................................................................... 35
zScreen Displays..................................................................................................... 39
zTroubleshooting .................................................................................................... 41
zError Messages...................................................................................................... 45
zOther Information .................................................................................................. 46
zSpecifications ........................................................................................................ 48
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Accessories
If there are any items missing, please consult your authorised dealer.
AC adapter
(AP-V50U)
Power cord
USB cable
Mini A – Mini B type
Stand
Audio/Video cable
Remote control
(RM-V55U)
Instruction manual
(this manual), other
printed material
DVD-R (blank disc) x 1
CD-ROM (data writing
software) x 1
Do not use the provided AC adapter and power cord for other devices. In
addition, do not use AC adapter and power cord other than those provided
with this burner. Doing so may result in electric shock or fire.
Placing the Burner
o Horizontal orientation
Take note of the top and bottom of the burner and place it in the horizontal
orientation.
o Vertical orientation
Align the groove on the bottom of
Groove
this burner with the bulge on the
stand and fix the burner securely on
the stand.
High side
Low side
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and Functions of Each Part
Front and Top Panel
Power (On/Off)
Stop
Power lamp
Power on: orange
USB connected: green
Play
Pause
Reverse skip
Forward skip
Remote
control sensor
Tray
Access lamp
Ventilation holes
Do not block these
ventilation holes.
To eject tray (P. 3)
Rear Panel
Connect to the Everio camera (P. 14) Connect to the TV’s component
Connect to the PC (P. 16)
video input connectors (P. 13)
Connect to the TV’s video
input connector (P. 13)
Connect to the TV’s
HDMI input terminal
(P. 12)
Connect to the
AC adapter
Connect to the TV’s audio input
connectors (P. 13)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
To display the tool menu (P. 25)
To display the playback menu
(P. 29)
Power (On/Off)
To change the output
resolution of the image (P. 33)
To perform basic setup
(P. 34)
To display information on the
screen (P. 39)
To display the playback
navigator (P. 27)
To display the playback
navigator (P. 23)
To select/confirm
To return to the previous
screen
Basicplayback
operations
(P. 25, 28)
• If the burner responds poorly to the remote control, the battery of the
remote control is weak. Replace it with a new battery. Insert correctly
according to the e and d directions indicated.
Note
• If problem occurs while using the remote control, remove the battery
and insert it again before operating the remote control.
o When using the remote
o When replacing the battery
control for the first time
Pull out the insulation sheet
Lithium battery
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the TV
Connecting to a TV with HDMI Input Terminal
TV
This burner
HDMI input
HDMI cable (not provided)
• Images can only be displayed on a High-bandwidth Digital Content
Protection (HDCP) monitor.
Note
• We recommend using the Category 2 HDMI cable (High Speed cable)
for viewing in higher picture quality.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV with Component Video Input Connectors
TV
Component
video cable
(not provided)
This burner
Component
video input
Y
CB/PB
CR/PR
Audio in (L)
Audio in (R)
Audio cable (not provided)
• Connect to a High-bandwidth Digital Content Protection (HDCP)
monitor when using an HDMI-DVI conversion cable.
Note
Connecting to a TV with Audio/Video Input Connectors
TV
This burner
Video input
Video input
Audio in (L)
Audio in (R)
Audio/Video cable
(provided)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Everio Video to a DVD
By connecting this burner to an Everio camera, you can easily copy recorded images to
a DVD.
Connecting to an Everio Camera
• Everio: Off
• This burner: Off
Preparations
AC adapter
USB connector
DC connector
To power
supply outlet
USB connector
Protrusion
USB cable (provided
with CU-VD50)
To DC jack
To power supply outlet
• When the USB cable is connected, all buttons on the remote control of
this burner are not functional except the power button.
Note
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating AVCHD Disc/Data Disc/DVD-Video
o Discs that can be created on this burner
Copy
High definition videos in
AVCHD Disc AVCHD format.
Playback
Can be played back on AVCHD-
compatible devices (such as Blu-ray
High definition videos in
MPEG-2 format.
Play back on this burner. (P. 23)
Cannot be played back on other devices.
Data Disc
Standard definition videos Can be played back on DVD recorder,
in MPEG-2 format. DVD player or this burner. (P. 27)
DVD-Video
• High definition Everio GZ-HD30/HD40 supports both AVCHD and MPEG-2 format
recording. Other high definition Everio supports MPEG-2 format recording. (As of
May 2008.)
• Mode switch on Everio:
Preparations
or
mode (depending on the item to be copied)
• This burner: On
A Turn on Everio
• The Backup menu will appear on the Everio’s LCD monitor.
B Insert a new disc
• Refer to page 3 on how to insert the disc.
• Refer to page 2 for the recommended discs.
C Create a AVCHD disc, data disc or DVD-Video
• Refer to the instruction manual of your Everio camera on how to create a
AVCHD disc, data disc or DVD-Video.
• Depending on the model connected, still images cannot be copied. For
details, refer to the instruction manual of the Everio camera.
Note
• Do not turn off this burner while data is being written to the disc. The
disc cannot be ejected during data writing. Wait until writing finishes.
• The remote control is not operable when this burner is connected to the
Everio.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying from PC to DVD
This burner can be used as a DVD burner when connected to a PC. And you can use
the provided software to copy to a DVD.
Connecting to a PC
• Everio: Off
• This burner: Off
Preparations
USB cable (provided
with Everio)
PC
USB connector
To power supply outlet
USB connector
DC connector
AC adapter
Copying to a DVD
A Turn on this burner and the PC
• Install the CyberLink Power2Go 5.5 Lite software if you have not done so.
(P. 18)
B Insert a new disc
• Refer to page 3 on how to insert the disc.
• Refer to page 2 for the recommended discs.
C Use Power2Go to copy to a DVD
A Use Power2Go to create a folder.
• Use half-width alphanumeric characters when entering the folder names or
file names. You can enter up to 40 characters.
B Under the “Burner” tab in the Power2Go “Configuration/Information” menu,
check the box next to “Close disc”. Confirm that the file system under the data
tab is set to “UDF 1.5”. Video playback will not function properly if the disc was
created with the file system set to “ISO9660/Joliet”.
C Copy files such as JTS, TPD and JPG into the folder.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
• For details on using Power2Go, refer to the User’s guide, Help and
Readme files installed with the software. You can access the User’s
guide, Help and Readme files from the Start menu on the PC.
• To get customer support and to register the software, you need the
following product key (CD-Key):
Note
PXNVM-NWE4G-XQD9Q-CU9DX-3FQFN-NAKUS
• This burner cannot be used to write files into CD-R or CD-RW discs.
Refer to page 51 for the recommended discs.
• This burner does not response to all the functions of Power2Go 5.5 Lite.
• Power2Go 5.5 Lite does not support conversion of audio files to MP3
format.
• When the “Enter Activation Key” screen appears while using Power2Go
5.5 Lite, close the screen without entering the activation key.
o Removing USB cable from PC
A Carry out removing of hardware on the PC.
B Remove the USB cable.
• To play back disc created on a PC on this burner, follow the following
Caution
procedure.
Insert the disc into this burner. After disc recognition, press the
NAVIGATION/TOP MENU button to display the playback navigator.
(P. 23)
• For data disc created on a PC, the date and time displayed will not be
accurate.
Computers That Can Be Used
CyberLink Power2Go 5.5 Lite can be used on computers satisfying the following
conditions.
Windowsா XP Home Edition (pre-installed)
Operating
system
Windowsா XP Professional (pre-installed)
Windows Vistaீ Home Basic (32-bit edition, pre-installed)
Windows Vistaீ Home Premium (32-bit edition, pre-installed)
Connector
CPU
USB 2.0/1.1 connector (*)
Intelா Pentiumா III, at least 800 MHz
(Intelா Pentiumா 4, at least 2 GHz recommended)
RAM
At least 128 MB (at least 256 MB recommended)
Free hard disk
space
At least 50 MB for installation
At least 5 GB recommended for creating DVDs
Display
Must be capable of displaying 800 x 600 dots
* If you use USB 1.1 cable, it will take approximately 3 hours to write one DVD.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing CyberLink Power2Go 5.5 Lite
• Do not play the provided CD-ROM in an audio player. It is not an audio
CD. Playing this CD-ROM in an audio player will result in a loud high
noise. It may also damage the circuit and speaker.
Caution
A Insert the provided CD-ROM in the PC
Windows Vista:
A Click “Run INSTALL.EXE” on the “AutoPlay” screen.
B Click “Continue” on the “User Account Control” screen.
C The “Choose Setup Language” screen appears.
Windows XP:
• After a while, the “Choose Setup Language” screen appears.
B Confirm the language and then click
“OK”
• The following screen appears.
C Click “Next”
• The “License Agreement” screen appears.
D Confirm the contents and then click
“Yes”
• The “Customer Information” screen appears.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
E Enter the “User Name” and “Company
Name” and then click “Next”
F Follow the on-screen intructions
• Installation starts.
After a while, the “InstallShield Wizard Complete” screen appears.
G Click “Finish”
• The computer will restart and installation is
completed.
• If the screen on the right does not appear,
proceed to step H.
H Click “Finish”
• The “CyberLink Power2Go 5.5” Readme
screen appears.
I Read the contents of the Readme
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CyberLink Power2Go 5.5 Lite Contact Information
For information on CyberLink Power2Go 5.5 Lite or other products, use the following
contact information.
Telephone/fax support
Office hours
(Mon. to Fri.)
Location
Language
Phone #
Fax #
English / German /
Germany French / Spanish / 9:00 am to 5:00 pm
Italian
+49-700-462-92375 +49-241-70525-25
+886-2-8667-1298
+886-2-8667-1300
ext. 333
Taiwan
Japan
Mandarin
Japanese
9:00 am to 6:00 pm
10:00 am to 5:00 pm
+81-3-3516-9555
-
Paid voice support
Lines are open
(Mon. to Fri.)
Location
Language
URL
1:00 pm to 10:00 pm
CST
support/new_site/voice_support.jsp
U.S.A.
English
Support web/e-mail
Language
URL/e-mail address
English
German / French /
Spanish / Italian
Japanese
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Folder Configuration
This shows the folder configuration when files are copied from a high definition Everio
camera or a PC to a DVD.
When Copying from High Definition Everio to Data Disc
(Back-up folders)
Video files
*1
[EVERIO_V]
EVERIO VIDEO
[BACKUP]
NORMAL BACK-UP
(Everio: CREATE FROM ALL)
[08060101]
[08060502]
[MOV001.TOD]
[MOV002.TOD]
\
ROOT
[DATE]
DATE BACK-UP
[08060101]
(Everio: CREATE BY DATE)
[EVENT]
EVENT BACK-UP
[08060101]
(Everio: CREATE BY EVENT)
[FILES]
[08060101]
FILE BACK-UP
(Everio: SELECT FROM SCENES)
[PLAYLIST]
[08060101]
PLAYLIST BACK-UP
(Everio: CREATE BY PLAYLIST)
(Back-up folders)
Still image files
*1
[BACKUP]
NORMAL BACK-UP
[08060101]
[PIC_0001.JPG]
[PIC_0002.JPG]
[EVERIO_S]
EVERIO IMAGE
[08060101]
[08060101]
[DATE]
DATE BACK-UP
[FILES]
FILE BACK-UP
*1
Video and still image files recorded on a high definition Everio camera that are
copied to this burner will be stored in the “EVERIO_V” and “EVERIO_S” folders.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
When Copying from High Definition Everio to AVCHD Disc
Video files
[STREAM]
[BDMV]
00000.m2ts
00001.m2ts
\
ROOT
[BACKUP]
[CLIPINF]
[PLAYLIST]
index.bdmv
MovieObject.bdmv
[EVERIO_I]
When Creating and Storing Desired Folders and Files on a PC
\
ROOT
Video/still image files
*2, 3
*4
[USER2.TPD]
[USER1.JTS]
[USER_DAT]
[USER_DAT2]
[USER_DAT3]
*2 Create folders with Power2Go and copy the desired video and/or still image files
into the folders. You can use any folder names and file names according to your
preference. (Indicated as “USER_DAT” in the illustration.)
*3 Use Power2Go to copy the “USER_DAT” folders to the DVD. (P. 16)
*4 Files with the extension “.TPD” or “.JTS” are high definition Everio video files edited
on the PC.
• Refer also to “Data format (extension)” (P. 49).
• You can create folders and files with any names according to your
Caution
preference; however do not use “EVERIO_V” or “EVERIO_S” as the
folder name.
• Use half-width alphanumeric characters when entering the folder names
or file names. You can enter up to 40 characters.
• You can create up to 6 levels of folders. Playback is not possible if more
than 6 levels are created.
• The total path length of the file is up to 240 characters.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Images Stored on the DVD
You can play back video and still images of Everio stored on a DVD.
Viewing Images Copied from the High Definition Everio
o To start viewing immediately after storing images on a DVD
A Remove the USB cable. (P. 14)
B Connect this burner to the TV.
• For details on connection, refer to “Connecting to the TV” (P. 12, 13).
• Check that the power lamp of this burner lights up in orange.
• After pressing the power button, it will take about 25 seconds to display
the intermediate screen. (P. 34)
A Insert the disc containing the copied images and the playback
navigator will appear
1/2
NAVIGATION
NAVIGATION
DVD-R
PAGE 001/002
DVD-R
PAGE 001/002
VIDEO
IMAGE
VIDEO
IMAGE
FOLDER
08060101
FOLDER
08060101
001
002
003
004
01.06.2008 09:51
01.08.2008 13:42
01.06.2008 11:45
01.06.2008 17:09
01.06.2008 10:20 01.06.2008 10:35 01.06.2008 11:03 01.06.2008 11:17
005 006 007 008
01.08.2008 15:15
01.08.2008 17:32
01.06.2008 11:21 01.06.2008 13:34 01.06.2008 15:41 01.06.2008 15:56
DIGEST PLAYBACK
SELECT
ENTER
RETURN
SELECT
ENTER
RETURN
PREVIOUS
NEXT
EXIT
TOOL MENU
TOOL
PREVIOUS
NEXT
EXIT
TOOL MENU
TOOL
TOP MENU
TOP MENU
Data disc (still images)
AVCHD disc
Data disc (video images)
• It will take about 40 seconds to display the playback navigator.
• To alternate between video and still images on a disc that contains video and still
images, switch using the TOOL MENU. (P. 25)
• For data disc (video), the file being selected is played back on its thumbnail.
(Motion thumbnail) It will take several seconds to display all the eight thumbnails.
And a little bit more time to show the motion thumbnail.
• The menu displayed may differ from the menu shown above when an AVCHD
disc created on other devices is inserted.
B Select and confirm on the file using the remote control
A Select
• Playback of the selected file starts.
• You can also press the PLAY button to play
back.
• You can browse the pages using the
PREVIOUS / NEXT (
/
) buttons.
B Confirm
• To stop an AVCHD disc during playback, press the STOP button. When
playback stops, the intermediate screen will appear. (P. 34)
To display the playback navigator, press the NAVIGATION/TOP MENU
button.
Note
23
Download from Www.Somanuals.com. All Manuals Search And Download.
o Digest Playback (for AVCHD disc only)
• Use the selection keys to select “DIGEST PLAYBACK” and press the ENTER
button. The videos will be played back for several seconds consecutively.
• Press the NAVIGATION/TOP MENU button during playback to display the sub
menu.
TO NORMAL PLAYBACK : Plays back the video normally.
TO INDEX MENU
: Returns to the playback navigator screen.
o To play back images in a different folder [for data disc (video/still
images) only]
A Display the folder list
Folder Name
A Select folder name
NAVIGATION
DVD-R
PAGE 001/002
VIDEO
IMAGE
FOLDER
08060101
001
002
003
004
01.06.2008 10:20 01.06.2008 10:35 01.06.2008 11:03 01.06.2008 11:17
005 006 007 008
B Confirm
01.06.2008 11:21 01.06.2008 13:34 01.06.2008 15:41 01.06.2008 15:56
SELECT
ENTER
RETURN
PREVIOUS
NEXT
EXIT
TOOL MENU
TOOL
TOP MENU
B Select the folder to play back
• The playback navigator appears when the ENTER button is pressed. Select and
confirm on the file to be played back.
NAVIGATION
DVD-R
01/002
A Select
FOLDER
VIDEO
ROOT
EVERIO VIDEO
NORMAL BACK-UP
001
08060101
08060102
08060501
08060701
ꢄꢁꢆꢄꢇꢆꢈꢉ ꢁꢁꢀꢁꢌ
08061301
08061302
005
DATE BACK-UP
08060101
08060501
08060701
ꢄꢁꢆꢄꢇꢆꢈꢉ ꢁꢋꢀꢋꢇ
08061301
B Confirm
SELECT
ENTER
RETURN
PREVIOUS
NEXT
EXIT
TOOL MENU
TOOL
TOP MENU
• You can also select the folder from the “TOOL MENU” (P. 25).
• Files are automatically sorted into the folders created depending on the item selected
in the Backup menu of the high definition Everio.
• To play back images copied from the PC, select the edited video files. (P. 22)
• Select a folder name when you have created a folder on the PC according to your
preference. (P. 22)
• If images do not appear, check the resolution setting. (P. 33)
Caution
• For short video clips (less than 3 seconds), the image will freeze for a few
seconds before playing the next file. (P. 44)
• For data disc (video), the image will freeze for a few seconds before
continuing to the next folder.
• Depending on the still image standards, some images are displayed
using a “?” thumbnail, and playback may fail in this case.
Note
• Progressive JPEG files and special files created on the PC cannot be
played back. Videos that are not playable are also displayed as “?”.
• It may take some time to display the images if the size is too large or
when there are too many files.
• For data disc (still images) created on a PC, files with less than 640 x
480 resolution will not be displayed in full screen.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
o Displaying the TOOL MENU [for data disc (video/still images) only]
You can switch between video/still images or display file details from the TOOL
MENU.
TOOL MENU
Operate when playback navigator is displayed
NAVIGATION
DVD-R
TOOL MENU
BACK
FOLDER SELECT
SWITCH TO IMAGE MODE
00SHOW DETAIL
VIDEO
IMAGE
A Select
FOLDER
08060101
001
002
003
01.06.2008 10:20 01.06.2008 10:35 01.06.2008 11:03 ꢄꢁ
0
0
0
5
0
0
6
0
0
7
0
0
01.06.2008 11:21 01.06.2008 13:34 01.06.2008 15:41 ꢄꢁ
0
B Confirm
SELECT
ENTER
RETURN
PREVIOUS
NEXT
EXIT
TOOL MENU
TOOL
TOP MENU
Select an item with the selection keys and press the ENTER button.
• FOLDER SELECT: Displays the folder list.
• SWITCH TO IMAGE MODE : Switches from video to still image.
(SWITCH TO VIDEO MODE: Switches from still image to video.)
• SHOW DETAIL: Displays the file name, folder name, recorded date, and playback
duration (for video) or image size (for still image). The playback
duration display for video will not be available if the file has not been
played back before.
• When the disc contains both videos and still images, the videos will be
Note
displayed first. To view still images, select “SWITCH TO IMAGE MODE”
from the TOOL MENU.
o Buttons that can be used during playback (AVCHD / data disc)
Description
Video Image Playback
Remote Control Button
Still Image Playback
Pressing this button when in
the paused or variable speed
playback mode resumes
normal playback.
PLAY
Starts the slide show.
PAUSE
STOP
Pauses playback.
Stops playback.
Pauses the slide show.
Stops the slide show.
Fast-forwards playback.
Changes in the order of Search
+1 to Search +3 with each
press.
Press the button when in the
paused mode to enable forward
playback frame by frame.
Press and hold the button to
slow down the playback speed.
Pressing the button each time
changes the playback speed
between 1/16x, 1/4x, and 1/2x.
FWD
b
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Video Image Playback
Remote Control Button
Still Image Playback
Rewinds playback. Changes in
the order of Search b1 to
Search b3 with each press.
Press the button when in the
paused mode to enable reverse
playback frame by frame. (Not
available for AVCHD disc.)
Reverse playback at slow
speed is not possible.
REV
b
Displays the next still
image.
NEXT
Displays the next video image.
Displays the beginning of the
video image.
Displays the previous still
image.
PREVIOUS
Rotates the still image by
Advances the playback position 90 degrees in the
Skip
by about 30 seconds.
clockwise direction.
Rotates the still image by
90 degrees in the anti-
backward by about 7 seconds. clockwise direction.
(When in paused mode.)
Moves the playback position
Replay
Enlarges the still image.
(2-step)
You can select the
position to enlarge using
the Up/Down/Left/Right
buttons. Press the
ENTER
b
RETURN button to restore
the original size.
(When in paused mode.)
NAVIGATION Displays the playback
/TOP MENU navigator.
Displays the playback
navigator.
Displays the playback menu.
Displays the playback
menu. (P. 29)
TOOL
(P. 29)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing DVD-Video Copied from Everio
o To start viewing immediately after storing images on a DVD
A Remove the USB cable. (P. 14)
B Connect this burner to the TV.
• For details on connection, refer to “Connecting to the TV” (P. 12, 13).
• Check that the power lamp of this burner lights up in orange.
• After pressing the power button, it will take about 25 seconds to display
the intermediate screen. (P. 34)
o To play back the copied files
A Insert the disc containing the copied images
• Playback starts automatically.
o To select and play back a desired file
A Insert the disc containing the copied images
• Playback starts automatically.
B During playback, press the NAVIGATION/TOP MENU button to
display the playback navigator
• Depending on the disc, you can display the playback navigator by pressing the
MENU button.
C Select and confirm on the file to play back
A Select
B Confirm
• To stop playback, press the STOP button. When playback stops, the
intermediate screen will appear. (P. 34)
Note
To display the playback navigator, press the NAVIGATION/TOP MENU
button.
• If images do not appear, check the resolution setting. (P. 33)
Caution
27
Download from Www.Somanuals.com. All Manuals Search And Download.
o Buttons that can be used during playback (DVD-Video)
Remote Control Button
Description
Pressing this button when in the paused or variable speed
playback mode resumes normal playback.
PLAY
PAUSE
STOP
Pauses playback.
Stops playback.
Fast-forwards playback. Changes in the order of Search +1
to Search +3 with each press.
Press the button when in the paused mode to enable
forward playback frame by frame.
FWD
Press and hold the button to slow down the playback
speed. Pressing the button each time changes the
playback speed between 1/16x, 1/4x, and 1/2x.
Rewinds playback. Changes in the order of Search b1 to
Search b3 with each press.
Press the button when in the paused mode to enable
reverse playback frame by frame.
REV
Press and hold the button to slow down the reverse
playback speed. Pressing the button each time changes
the reverse playback speed between b1/16x and b1/4x.
NEXT
Displays the next video.
PREVIOUS Displays the previous video.
Skip
Advances the playback position by about 30 seconds.
Moves the playback position backward by about 7 seconds.
Displays the playback menu. (P. 29)
Replay
TOOL
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Playback Settings
You can alter the method for playing back video/still images as well as the image
settings.
Operate during playback
PLAYBACK SETTING
REPEAT
OFF
CHANGE TITLE
CHANGE CHAPTER
indicates the default settings during purchase of this product.
DISC SETTING
If the disc contains more than one audio language, subtitle
language or has multi-angle scenes, you can select with
this setting.
AUDIO LANGUAGE
SUBTITLE
CHANGE ANGLE
Set the audio language to be played back.
Set the subtitle language to be displayed.
Switch the angle (camera) to be played back.
PLAYBACK SETTING
REPEAT
For configuring settings on video playback and repeat playback of slide shows.
OFF
Do not repeat.
TITLE
Repeats playback of the title. (For video images only.)
Repeats playback between the chapters. (For AVCHD
discs and DVD-Videos only.)
Repeats playback of files within a folder. (For files
stored on the PC only.)
CHAPTER
FOLDER
Repeats playback of all files*. (For data disc stored on
high definition Everio only.)
* The files in the current folder are played back
repeatedly when you play back from the playback
navigator.
ALL
Repeats playback between two predetermined points A
and B. (For DVD-Videos only.)
A-B
CHANGE TITLE (For AVCHD discs and DVD-Videos only)
Jumps to the specified title.
CHANGE CHAPTER (For AVCHD discs and DVD-Videos only)
Jumps to the specified chapter.
SLIDESHOW INTERVAL (For still images only)
5 SEC / 10 SEC /15 SEC For specifying the time for displaying images.
SLIDESHOW EFFECTS (For still images only)
For specifying the fade effect when switching to another image.
OFF
ON
Disable fade effect.
Enable fade-in or fade-out from black colour.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO SETTING
You can only configure settings for video images.
PICTURE QUALITY
For specifying the video image quality.
NORMAL
CINEMA
FINE
Set to this value under normal circumstances.
Plays back in cinema-like picture quality.
Plays back in clear sharply defined picture quality.
Plays back in soft textured picture quality.
SOFT
Plays back images in the picture quality specified in
“DETAIL SETTING”.
USER SETTING
DIGITAL NOISE REDUCTION
For specifying whether to enable noise removal from the image.
OFF
ON
Disable noise removal.
Enable noise removal.
DETAIL SETTING
For specifying the advanced settings when “PICTURE QUALITY” is set to “USER
SETTING”.
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
For specifying the image contrast level.
For specifying the image brightness level.
For specifying the image contour.
For specifying the colour intensity of the image.
For specifying the image gray level.
GAMMA
3DNR
For specifying the image noise reduction.
PROGRESSIVE OUTPUT
For playing back the source material after converting to an appropriate progressive
video.
Automatically detects the film material and video material
and converts to the appropriate progressive video.
AUTO1
In addition to “AUTO1”, automatically detects the 30fps
progressive video and converts to the appropriate
progressive video.
Converts the video material to the appropriate progressive
video.
AUTO2
VIDEO
• Changing the setting may have no effect on some images.
Note
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Operate in Conjunction with TV via
HDMI
Connecting this burner to an HDMI-CEC-enabled TV using the HDMI cable allows you
to utilise the following convenient functions.
• Connect an HDMI cable between this
Preparations
burner and the TV. (P. 12)
CONNECTION SETTING
• Turn on the TV and set the HDMI-CEC
MONITOR TYPE
16:9
576i
COMPONENT OUTPUT
HDMI VIDEO MODE
related setting in its menu to “on”. (For
details, refer to the instruction manual of
the TV.)
• Turn on this burner and set “CONTROL
WITH HDMI” under “CONNECTION
SETTING” in the settings menu to “ON”.
(P. 34, 37)
SELECT
ENTER
RETURN
EXIT
HDMI cable (not provided)
Operation method 1
• Insert a disc.
• The TV automatically
switches to the HDMI input.
(Turn on the TV
(Press the PLAY or
NAVIGATION/TOP
MENU button if the
playback navigator does
not appear.)
beforehand.)
Operation method 2
• This burner turns off
automatically.
• Turn off the TV.
• Some TV will turn on automatically and switch to the HDMI input just by
turning on this burner.
Note
• Depending on the TV connected, the onscreen display language of this
burner will automatically switched to the language that was being
selected for the TV when the burner is turned on.
(This is applicable only if this burner supports the language selected for
the TV.)
To use this burner using a language that differs from the onscreen
display language of the TV, set “CONTROL WITH HDMI” to “OFF”.
• Malfunction may occur when devices such as amplifier and selector are
connected. Set “CONTROL WITH HDMI” to “OFF”.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
• HDMI-CEC (Consumer Electronics Control) is an industry standard that
enables interoperability between HDMI-CEC compliant devices that are
connected via HDMI cables.
Note
• Not all HDMI-compatible devices comply with the HDMI-CEC standard.
The HDMI control function of this burner will not work when connected
to these devices.
• This burner is not guaranteed to operate with all HDMI-CEC-enabled
devices.
• Depending on the specifications of each HDMI-CEC-enabled device,
some functions may not work with this burner. (For details, refer to the
instruction manual of your TV.)
• Unintended operations may occur with some connected devices. In
these cases, set “CONTROL WITH HDMI” to “OFF”.
• HDMI control does not function when the USB cable is connected.
Remove the USB cable if you want to use the HDMI control function.
• HDMI control does not function immediately after inserting the power
cord to the AC outlet. Press the power button on this burner to turn it on.
• If the HDMI cable connection is changed, perform the following
operations to allow this burner and the connected devices to recognise
each other.
Caution
A With the TV turned on, turn off and on this burner again.
B Set the “CONTROL WITH HDMI” under “CONNECTION SETTING” in
the settings menu to “OFF”, then set to “ON” again.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing High Quality Images
You can change the video output resolution when this burner is connected to a high
definition TV using a HDMI or component video cable.
(Intermediate screen)
Operate when in the intermediate screen*
* To display the intermediate screen, refer to page 34.
Current resolution: AUTO
• Press the button each time to change the output resolution.
o Connection using HDMI cable (“HDMI VIDEO MODE” : “ON”)
(Resolutions not supported by the TV are not displayed.)
AUTO
576p
720p
1080i
1080p
o Connection using component video cable
(“HDMI VIDEO MODE” : “OFF”, HDMI cable not connected)
576i
576p
720p
1080i
o Connection using video cable
Setting is not necessary. “576i” is output regardless of the setting.
• If this burner is connected to a TV that does not support the preset output
Caution
resolution using a HDMI cable, the setting switches automatically to
“AUTO”.
• When this burner is connected using a component video cable with the
output resolution set to “1080i” or “720p”, the output resolution will be set
to “576i” or “576p” if a DVD-Video disc is inserted.
• When the HDMI cable is connected, the resolution of the component
connectors is fixed at “576i”. (“HDMI VIDEO MODE” : “ON”)
Note
• When the resolution is set to “576p” for the HDMI cable connection, the
“4:3 PAN&SCAN” or “4:3 LETTERBOX” display format under
“MONITOR TYPE” in the settings menu will be selected if the image
size is 4:3. (P. 35)
• For NTSC system, “576i” and “576p” are displayed as “480i” and “480p”
respectively.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Menu
Change the settings of this burner according to the environment of use.
Menu Operation Procedures
• The SET UP button can only function when the intermediate screen
Caution
(screen without image display) is displayed. If the playback navigator is
displayed, press STOP (for AVCHD disc and DVD-Video) or
NAVIGATION/TOP MENU (for data disc) to clear the screen.
Example: When changing “MONITOR TYPE” under “CONNECTION SETTING” from
“16:9” to “4:3 LETTERBOX”
A Display the settings menu
B Select “CONNECTION SETTING”
A Select
CONNECTION SETTING
MONITOR TYPE
16:9
576i
COMPONENT OUTPUT
HDMI VIDEO MODE
B Confirm
SELECT
ENTER
RETURN
EXIT
C Select “MONITOR TYPE”
A Select
CONNECTION SETTING
MONITOR TYPE
16:9
576i
COMPONENT OUTPUT
HDMI VIDEO MODE
B Confirm
SELECT
ENTER
RETURN
EXIT
D Select “4:3 LETTERBOX”
A Select
CONNECTION SETTING
16:9
MONITOR TYPE
16:9
576i
16:9FULL
COMPONENT OUTPUT
HDMI VIDEO MODE
4:3 PAN&SCAN
4:3 LETTERBOX
B Confirm
SELECT
ENTER
RETURN
EXIT
E Close the settings menu
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Menu Items and Descriptions
indicates the default settings during purchase of this product.
¹ Menu items for which setting cannot be changed will appear grayed out on the
screen.
DISC SETTING
If the disc contains more than one audio language, subtitle
language or has multi-angle scenes, you can select with this
setting.
AUDIO LANGUAGE Set the audio language to be played back.
SUBTITLE
CHANGE ANGLE
Set the subtitle language to be displayed.
Switch the angle (camera) to be played back.
VIDEO SETTING
BLACK LEVEL CONTROL
For specifying the black level of the video image.
DARKER
BRIGHTER
Set to this value under normal circumstances.
Set to this value to brighten the dark areas of the video image.
AUDIO SETTING
DYNAMIC RANGE COMPRESSION
For specifying the dynamic range (ratio between strong and weak signals) of audio
sound. Minute sounds may be heard when the dynamic range is compressed.
ON
OFF
Outputs audio sound after compressing the dynamic range.
Outputs the recorded audio sound without compressing.
CONNECTION SETTING
MONITOR TYPE
Specify the screen size according to the TV connected. (If the screen size of the TV
is fixed, images displayed on the TV will not change even if you change the settings
of the burner.)
When connecting to a wide-screen TV (16:9)
(A black band will appear on both left and right sides for 4:3
images.)
16:9
When connecting to a wide-screen TV (16:9)
(4:3 images will be stretched sideways.)
16:9FULL
When connecting to a 4:3 TV
(The left and right sides of 16:9 images will be missing.)
4:3 PAN&SCAN
When connecting to a 4:3 TV
(A black band will appear at the top and bottom for 16:9
images.)
4:3 LETTERBOX
• Changing the setting may have no effect on some images.
Note
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION SETTING
COMPONENT OUTPUT
For specifying the output resolution setting of the component connectors. You can
also specify the setting using the remote control. (P. 33)
576i*
576p*
720p
During output in D1 (576i)
During output in D2 (576p)
During output in D3 (1080i)
During output in D4 (720p)
1080i
HDMI SETTING
HDMI VIDEO MODE
Specify this setting when you are using the burner with both the HDMI terminal
and component connectors connected.
ON
OFF
Outputs with priority given to the HDMI terminal.
Outputs with priority given to the component connectors.
HDMI OUTPUT
For specifying the output resolution setting of the HDMI terminal. You can also
specify the setting using the remote control. (P. 33)
AUTO
576p*
Set to this value under normal circumstances.
During output in D2 (576p)
720p
During output in D3 (1080i)
1080i
During output in D4 (720p)
1080p
During output in D5 (1080p) (P. 12)
24p OUTPUT
JVC camcorders do not support 1080/24p recording. (As of May 2008.)
Specify this setting when viewing video images recorded by other devices in
1080/24p on a TV that supports 1080/24p via HDMI connection.
Select this value to output the images in 1080/24p to a TV that
supports 1080/24p. Set to “OFF” if the images cannot be
played back properly.
AUTO
OFF
Set to this value under normal circumstances.
x.v.Color
Specify this setting when viewing video images recorded in x.v.Color on a TV that
supports x.v.Color. This enhances viewing through reproducing colours closely to
their natural colours.
AUTO
Set to this value under normal circumstances.
Set to this value when the video images are distorted or when
the colours are not correctly reproduced.
OFF
* For NTSC system, “576i” and “576p” are displayed as “480i” and “480p” respectively.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Deep Color
This function works during playback. Specify this setting when viewing images on
a TV that supports Deep Color. This allows viewing of high definition images of
30-bit and 36-bit colour depths that are higher than the full 24-bit colour.
Select this value to view high definition images on a TV that
supports Deep Colour. Set to “OFF” if the images cannot be
played back properly.
AUTO
OFF
Set to this value under normal circumstances.
HDMI ENHANCE SETTING
Specify this setting when connected to a TV that comes with the DVI input
terminal using an HDMI-DVI conversion cable.
STANDARD
Set to this value under normal circumstances.
Set to this value when the black and white colours of the video
image are not clear.
ENHANCED
CONTROL WITH HDMI
For specifying whether to use the HDMI-CEC function which allows the TV to
operate in conjunction with this burner. (P. 31)
OFF
ON
Do not operate in conjunction with TV.
Operate in conjunction with TV.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER SETTING
RESUME *
For specifying whether to memorise the stop position.
ON
OFF
Memorise the stop position.
Do not memorise the stop position.
ON SCREEN GUIDE
For specifying whether to display the playback status information.
AUTO
OFF
Display for 5 seconds.
Do not display.
ON SCREEN LANGUAGE
For specifying the language to be displayed for the settings menu screen and others.
“ENGLISH” is set as the default language.
(
/ ENGLISH / FRANÇIAS / DEUTSCH / ITALIANO / NEDERLANDS /
PORTUGUÊS / ESPAÑOL /
/
/
/ РУССКИЙ)
SCREEN SAVER
For specifying whether to activate the screensaver.
Activates the screensaver when this burner is not operated for
an interval of 5 minutes.
ON
OFF
Do not activate the screensaver.
INITIALIZE SETTING
Restores the settings to the default state at the time of purchase.
DATE DISPLAY STYLE (For data disc only)
Sorts the dates in order. (year.month.day / month.day.year / day.month.year)
TIME DISPLAY CHOICE (For data disc only)
For specifying the time display. (12h / 24h)
* For resume function, the stop position will be reset if the burner is connected to an
Everio or a PC via the USB cable, or when the burner is turned off and the disc is
removed.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Displays
You can display information during playback on the screen.
• Press each time to hide/show information.
o During playback of AVCHD disc copied from a high definition Everio
Chapter Number
Playback Time
Title Number
Disc Type
DVD-R
Dolby D 2ch
T2
C1
00:00:25
Audio Format
Playback Mode
Playback Position
o During playback of video data disc copied from a high definition
Everio
Playback Time
File Date/Time
Disc Type
DVD-R
01.06.2008 10:20 00:00:25
MPEG 2ch
Playback Position
Audio Format
Playback Mode
39
Download from Www.Somanuals.com. All Manuals Search And Download.
o During playback of still image data disc copied from a high definition
Everio
File Date/Time
Disc Type
DVD-R
01.06.2008 10:20
Playback Mode
o During playback of DVD disc copied from Everio
Chapter Number
Playback Time
Title Number
Disc Type
DVD-R
Dolby D 2ch
T1
C1
00:00:25
Audio Format
Playback Mode
Playback Position
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Trouble
Action
Cannot turn the
power on.
zMake sure the AC adapter and power cord are
properly connected. (P. 2)
zPress the power button on this burner for more
than 5 seconds to reset the burner. (The burner
will turn off automatically.)
Cannot function
properly.
zThe burner and AC adapter will become hot
with prolonged use. This is not a malfunction.
zIf the burner is abnormally hot, remove the AC
adapter and consult the dealer from which the
burner is purchased.
The burner or AC
adapter is hot.
zThe burner cannot function properly due to a
drop in its interior temperature. Wait until the
power lamp stops blinking.
zThere is a rise in the burner’s interior
temperature. Turn off the burner, wait for a
while then turn on again.
The power lamp
blinks slowly in red
while using the
burner.
zMake sure the USB cable is connected
properly. Insert the connector with the
protrusion to the burner, and the other end to
the Everio camera. (P. 14)
The burner is not
recognised by the
Everio camera.
The burner is not
recognised by the PC.
zMake sure the USB cable provided with the
Everio camera is connected properly. (P. 16)
zUse discs recommended for the burner. (P. 48)
zInsert the disc with the label facing up.
zWipe off any dirt that is found on the tray.
zUse discs for which the writing surface is not
damaged.
Writing fails.
zDo not use deformed discs.
zIf disc writing is currently in progress, the disc
tray cannot be opened. Wait till the writing
process ends.
zIf the disc cannot be properly ejected after the
burner is dropped or due to other malfunctions,
insert a thin rod into the force eject hole to eject
the disc. (P. 44)
Cannot open the disc
tray.
Unable to write/read
data at the maximum
speed (when
zUse the recommended discs. (P. 48)
connected to a PC)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble
Action
The remote control is
not working.
zThe remote control is not operable when the
disc tray is opened. Close the disc tray.
zIf the burner does not work at all, remove the
power plug and insert again. (It may not
function properly due to lightning strike or static
electricity.)
Unable to operate.
zConnect this burner to a TV. (P. 12, 13)
zSwitch to the external output that connects the
burner to the TV with a video/audio input
connectors.
zAfter pressing the power button, it will take
about 25 seconds to display the intermediate
screen. (P. 34)
No images on the TV.
zIf there are too many recorded files or when a
disc that is not recommended is used, it will
take several minutes to display the playback
navigator.
zCheck the resolution setting again. (P. 33)
Images are distorted
during fast-forward/
fast-reverse playback.
z
Images may be distorted for sections where the
playback speed changes. This is not a
malfunction.
zWhen both the HDMI terminal and Audio/Video
VIDEO MODE” in the settings menu to “OFF” to
output the images with priority given to the
Audio/Video output connectors. (P. 36)
The images cannot be
displayed in the
normal aspect ratio.
zInsert the disc with the label facing up.
zWipe off any dirt that is found on the tray.
zMake sure that the writing surface of the disc is
not damaged.
Reading fails.
zDo not use deformed discs.
Playback cannot
function properly.
zPlayback of commercial DVD-Video is not
guaranteed.
zAVCHD disc created on a high definition Everio
is equipped with the Digest Playback function. If
the PREVIOUS / NEXT button is pressed
repeatedly during playback, Digest Playback
will start when the normal playback ends.
(P. 24)
Digest Playback
starts when the
PREVIOUS / NEXT
button is pressed
repeatedly.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble
Action
Unable to read the
content of the AVCHD
disc using the PC’s
explorer function.
zThe PC’s operation system does not support
the AVCHD disc. Install the Power2Go software
provided.
Unable to play back
images added by a
PC.
zWhen playing back a disc (multi-border disc)
containing images added by a PC, the added
images cannot be played back.
The TV switches input
automatically when
the burner is played.
The TV turns off when
this burner is turned
off.
zThe HDMI-CEC function is enabled. To disable,
set “CONTROL WITH HDMI” in the settings
menu to “OFF”. (P. 37)
This burner functions
when the TV’s remote
control is being
operated.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems with seamless playback
During continuous playback of multiple files, the image will freeze for a few seconds
while switching the files in the following cases.
• When the recording dates are different:
The image will freeze for a few seconds when switching between files with different
recording dates.
For files with the same date, playback is seamless.
• When files are deleted:
If files are deleted and added after deleting during continuous recording, the image
will freeze for a few seconds at the part where deleting is done.
When no files are deleted, playback is seamless.
• When the picture quality (XP/SP/EP) is changed during recording:
The image will freeze for a few seconds when switching between files with different
picture quality.
For files recorded in the same picture quality, playback is seamless.
• When the recorded file is less than 3 seconds:
The image will freeze for a few seconds at the end of a file that is less than
3 seconds.
• When more than 99 files with the same date are recorded:
The image will freeze for a few seconds when switching between files at every 99 file
recordings.
For continuous 99 files, playback is seamless.
Disc cannot be ejected
When a disc cannot be ejected with the eject button, use the following procedure to
eject by force.
A Turn off this burner.
B Insert a thin rod into the force eject hole
located next to the eject button and the tray will
be ejected.
C Pull out the tray manually and remove the disc.
Force eject hole
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Trouble
Action
zThe disc may be dirty. Clean the disc and try again.
zThe disc or data format is not supported. Check the
disc or data format (extension). (P. 49)
Unplayable disc
zInsert a disc that can be played on this burner.
(P. 49)
zThe “Close disc” check box in Power2Go might have
been unchecked to allow further recording. Under
the “Burner” tab in the Power2Go “Configuration/
Information” menu, check the box to close the disc.
(P. 16)
Incompatible disc
zDisc is not finalised when it is copied from the high
definition Everio. Make sure to finalise the disc after
copying. (For details, refer to the instruction manual
of the Everio camera.)
Unfinalized disc
Use finalized disc
Disc error
zThe disc may be dirty. Clean the disc and try again.
zDiscs with a region code that differs from the region
code set for this burner cannot be played back.
Insert a disc with a region code that matches the
region code of this burner. (P. 46)
Region code error
Cannot execute the
operation
zOperate after stopping playback.
zFile data may be missing.
zThe disc or data format is not supported. Check the
disc or data format (extension). (P. 49)
Cannot play back
zYou have selected a folder that does not contain any
videos.
Select a folder with video files. (P. 25)
No video files
stored
zYou have selected a folder that does not contain any
still images.
Select a folder with still image files. (P. 25)
No image files
stored
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Cleaning Procedure
IMPORTANT:
• Be sure to unplug the burner before beginning cleaning.
• Do not use liquid or aerosol cleaners.
• Ensure that no moisture or liquid comes into contact with the drive during cleaning.
Exterior of the Burner:
Wipe dirt off with a dry cloth.
Disc Tray:
Wipe off dirt with a soft dry cloth.
Do not touch the lens. To clean the lens, use commercially
available lens cleaning blower for cameras. Using a lens cleaning
disc will cause malfunction.
Lens
Disc:
Use a commercially available cleaning cloth to gently wipe from the inner edge to the
outer edge.
Do not paste any stickers on the label side of the disc. This will cause the center of
rotation to deviate and increase the vibration of the rotating disc thereby affecting
proper playback.
Storage:
Make sure that discs are kept in their cases. If discs are piled on top of one another
without their protective cases, they can be damaged. Do not put discs in a location
where they may be exposed to direct sunlight, or in a place where the humidity or
temperature is high. Avoid leaving discs in your car!
Region Codes
Region codes are numbers for restricting DVD video playback. The world is separated
into six regions and each region is identified by a number. If the number for a disc does
not match the number for the player, the disc cannot be played on the player.
Disclaimer
JVC accepts no liability whatsoever for loss of data resulting from inappropriate
connections or handling.
Copyrights
Duplicating copyright protected material, for other than personal use, without the
permission of the copyright holder is prohibited by copyright law.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Registered Trademarks and Trademarks
• Microsoft, Windows, and Windows Vista are is either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
• Macintosh and Mac OS are trademarks of Apple, Inc., registered in the United States
and other countries.
• Pentium is a registered trademark of Intel Corporation in the United States.
• Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
• HDMI, the HDMI logo and high definition multimedia interface are trademarks or
registered trademarks of HDMI Licensing LCC.
• The x.v.Color and x.v.Color logos are trademarks.
• The AVCHD and AVCHD logos are trademarks of Matsushita Electric Industrial Co.,
Ltd. and Sony Corporation.
• Other company and product names mentioned herein are registered trademarks and/
or trademarks of their respective holders.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Rated current
Dimensions
Mass
2.3 A
152 x 42 x 195 mm (W x H x D)
Approx. 920 g (excluding AC adapter and connection cables)
Operating
environment
Operating temperature: 0 ؇C to 35 ؇C
Storage temperature: -20 ؇C to 60 ؇C
Laser power
For DVD: 656 to 663 nm, 1.04 mW
(wavelength,output) For CD: 777 to 788 nm, 1.33 mW
AC adapter (AP-V50U)
Power supply
Input capacity
Output
AC110 V to 240 V, 50 Hz/60 Hz
0.6 A
DC 5.3 V, 3.5 A
Operating
temperature
0 ؇C to 40 ؇ C
Dimensions
Mass
52 x 31 x 120 mm (W x H x D, excluding power cord)
Approx. 136 g
Remote control (RM-V55U)
Type
DC 3 V (CR2025 button battery)
Battery life
Approx. 1 year (depending on the frequency of use)
Operating distance Approx. 5 m (face up)
Operating
0 ؇C to 40 ؇ C
temperature
Dimensions
Mass
42 x 12 x 100 mm (W x H x D)
Approx. 32 g (including lithium battery)
Recommended discs
DVD-R
JVC, TDK, Verbatim, SONY
JVC *2, Verbatim
JVC
DVD-R DL *1
DVD-RW
• Use of this burner may not be possible or optimal performance may not be achieved
depending on the disc used. We suggest using the recommended discs.
• Use DVDs for videos.
• This burner supports only 12 cm discs.
• The appearance and specifications of this product may be modified without prior
notice.
*1 DVD-R DL discs can be used when the burner is connected to a high definition
Everio and PC.
*2 For DVD-R DL manufactured by JVC, use of discs with the “Also recommended for
high definition Everio” message stated is recommended.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback feature
Discs supported
DVD-R, DVD-R DL, DVD-RW
Data format
(extension)
zAVCHD or DVD data disc created by connecting to a high
definition Everio
zDVD video disc created by connecting to Everio
zDVD data disc for which data is recorded using the high
definition Everio, processed using an editing software of
Everio, and written to a specific folder on this burner
• Select the file format for GZ-HD series as the output format
in the PowerDirector output menu.
• Set the file system under the data tab in the Power2Go 5.5
Lite configuration menu to “UDF 1.5”.
• If images created by selecting “SVRT” in the PowerDirector
output menu cannot be played back correctly, deselect
“SVRT” and execute again.
zExtensions recognised by this burner are as follows.
(Extensions that have been changed cannot be played back
properly.)
• Data recorded on Everio (via PC): MTS, TOD, MOD, JPG
• Data edited on PC: JTS, TPD, JPG
• When playing back a file created on a PC, pressing the
PLAY button after searching may cause the playback
position to deviate.
Video output
Audio output
1.0 V 75 K (Pin jack)
2.0 Vrms (Pin jack)
Component video
output
Y p-p: 1.0 V 75 K (Pin jack)
CB/CR, PB/PR p-p: 0.7 V 75 K (Pin jack)
HDMI output
terminal
19-pin HDCP, x.v.Color, Deep Color compliant
Video: 1080p / 1080i / 720p / 576p* / 576i*
(We do not provide guarantee for compatibility with DVI-D.)
Audio: 2CH PCM/bit stream
* For NTSC system, the video output format is 480p or 480i.
• Discs other than those above cannot be played back properly.
Caution
49
Download from Www.Somanuals.com. All Manuals Search And Download.
When connected to an Everio camera
Interface
USB 2.0
Interface cable
USB cable (Mini A type - Mini B type)
Compatible discs for Everio
writing
DVD-R, DVD-RW
High definition
(8 cm discs cannot
be used)
DVD-R, DVD-R DL, DVD-RW
DVD-Video (video only)
Everio
Recording format
Everio
High definition AVCHD disc (video)
Everio
Data disc (video, still image)
Recording time
Everio
Approx. 30 minutes (including time for
finalisation)
When recording videos for about 90 minutes
in the Fine mode to a 4.7 GB disc. (This may
vary according to conditions such as the
number of titles.)
High definition AVCHD disc:
Everio
Approx. 60 minutes (including time for
finalisation)
• When recording videos for about 60 minutes
in the XP mode to a 8.5 GB DVD-R DL disc.
(This may vary according to conditions such
as the number of files.)
Data disc:
Approx. 45 minutes (including time for
finalisation)
• When recording videos for about 40 minutes
in the FHD mode to a 8.5 GB DVD-R DL
disc. (This may vary according to conditions
such as the number of files.)
• GZ-MC100, GZ-MC200, GZ-MC500, GZ-MG20, GZ-MG40, GZ-MG50, and
GZ-MG70 cannot be used.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
When connected to a PC
USB 2.0, USB 1.1 *1
USB cable (USB cable provided with Everio can also be used)
Interface
Interface cable
Supported operating Windowsா XP Home Edition, Windowsா XP Professional
system
Windows Vistaீ Home Basic, Windows Vistaீ Home
Premium
(Macintosh is not supported.)
Data buffer capacity 2 MB
Data transfer rate
(for USB 2.0)
Writing
DVD-R: Maximum 8x
DVD-RW: Maximum 6x
DVD-R DL: Maximum 6x
Reading
DVD-R: Maximum 8x
DVD-RW: Maximum 8x
DVD-R DL: Maximum 8x
CD-R: Maximum 24x *2
CD-RW: Maximum 24x *2
CD-ROM: Maximum 24x
Compatible discs
(8 cm discs cannot
be used)
Writing
DVD-R, DVD-RW, DVD-R DL
Reading
DVD-R, DVD-RW, DVD-R DL, CD-ROM, CD-R,
CD-RW
Supported software PowerProducer 4 NE (provided with Everio)
CyberLink Power2Go 5.5 Lite (provided with CU-VD50)
*1 If you are using a USB 1.1 cable, it will take approximately 3 hours to write one
DVD.
*2 Any CD recorded using the packet-write method is not supported.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in Malaysia
0608MNH-SW-VM
© 2008 Victor Company of Japan, Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
|