COMPACT COMPONENT SYSTEM
SYSTEME DE COMPOSANTS COMPACT
FS-P400
—Consists of CA-FS400 and SP-UXP400
—Composé CA-FS400 et SP-UXP400
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
GVT0128-001A
[C]
Download from Www.Somanuals.com. All Manuals Search And Download.
For U.S.A.
For Canada/pour le Canada
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS
ELECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQUAU FOND.
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Section 820-40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
For Canada/pour le Canada
THIS DIGITAL APPARATUS DOES NOT EXCEED
THE CLASS B LIMITS FOR RADIO NOISE
EMISSIONS FROM DIGITAL APPARATUS AS SET
OUT IN THE INTERFERENCE-CAUSING
EQUIPMENT STANDARD ENTITLED “DIGITAL
APPARATUS,” ICES-003 OF THE DEPARTMENT
OF COMMUNICATIONS.
Consult the dealer or an experienced radio/TV
technician for help.
CET APPAREIL NUMERIQUE RESPECTE LES
LIMITES DE BRUITS RADIOELECTRIQUES
APPLICABLES AUX APPAREILS NUMIRIQUES DE
CLASSE B PRESCRITES DANS LA NORME SUR LE
MATERIEL BROUILLEUR: “APPAREILS
NUMERIQUES”, NMB-003 EDICTEE PAR LE
MINISTRE DES COMMUNICATIONS.
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
1 CLASS 1 LASER PRODUCT
2 CAUTION: Do not open the top cover. There are no
user serviceable parts inside the Unit; leave all
servicing to qualified service personnel.
3
CAUTION: Visible and invisible laser radiation when
open and interlock failed or defeated. Avoid direct
exposure to beam.
4 REPRODUCTION OF LABEL: CAUTION LABEL,
PLACED INSIDE UNIT.
1 PRODUIT LASER CLASSE 1
2 ATTENTION: N’ouvrez pas le couvercle supérieur. Il
n’y a aucune pièce réparable par l’utilisateur à
l’intérieur de l’appareil; confiez toute réparation à un
personnel qualifié.
3 ATTENTION: Risque de radiations laser visible et
invisible quand l’appareil est ouvert ou que le
systéme de verrouillage ne fonctionne pas ou a été
mis hors service. Évitez toute exposition directe au
rayon.
4 REPRODUCTION DE L’ÉTIQUETTE: ÉTIQUETTE
DE PRÉCAUTION PLACÉE L’INTERIEUR DE
L’APPAREIL.
.
G-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction........................................................ 2
Precautions..........................................................................2
How to Read This Manual..................................................2
Getting Started................................................... 3
Step 1: Unpack....................................................................3
Step 2: Prepare the Remote Control ...................................3
Step 3: Hook Up .................................................................4
Before Operating the System ............................ 7
Daily Operations—Playback............................. 8
Listening to the Radio.........................................................9
Playing Back a Disc..........................................................10
Playing Back a Tape .........................................................11
Daily Operations—Sound & Other
Adjustments...................................................... 12
Adjusting the Volume.......................................................12
Adjusting the Sound .........................................................12
Changing the Display Brightness .....................................13
Setting the Clock...............................................................13
Turning Off the Power Automatically..............................13
Advanced Disc Operations.............................. 14
Programming the Playing Order—Program Play.............14
Playing at Random—Random Play..................................15
Playing Repeatedly—Repeat Play....................................16
Prohibiting Disc Ejection—Child Lock............................16
Advanced Tape Operations............................. 17
Recording on a Tape.........................................................17
Synchronized Disc Recording ..........................................18
Timer Operations............................................. 19
Setting the Timer ..............................................................19
Additional Information ................................... 22
Learning More about This System ...................................22
Troubleshooting................................................................23
Maintenance......................................................................23
Specifications....................................................................24
Parts Index ........................................................................24
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Precautions
How to Read This Manual
To make this manual as simple and easy-to-understand as
possible, we have adapted the following methods:
• Button and control operations are explained as listed in the
table below. In this manual, the operations using the
remote control is mainly explained; however, you can use
the buttons and controls on the main unit if they have the
same (or similar) name and marks.
Installation
• Install in a place which is level, dry and neither too hot nor
too cold—between 5°C and 35°C (41°F and 95°F).
• Install the System in a location with adequate ventilation to
prevent internal heat buildup inside the System.
DO NOT install the System in a location near
heat sources, or in a place subject to direct
sunlight, excessive dust or vibration.
•
Some related tips and notes are explained later in the
sections “Learning More about This System” and
“Troubleshooting,” but not in the same section
explaining the operations. If you want to know more
about the functions, or if you have a doubt about the
functions, go to these sections and you will find the
answers.
• Leave sufficient distance between the System and the TV.
• Keep the speakers away from the TV to avoid interference
with TV.
Power sources
Indicates that you press the button
• When unplugging the System from the wall outlet, always
pull on the plug, not the AC power cord.
briefly
.
Indicates that you press the button
briefly and repeatedly until an
option you want is selected.
DO NOT handle the AC power cord with wet
hands.
Moisture condensation
Moisture may condense on the lenses inside the System in
the following cases:
Indicates that you press one of the
buttons.
• After starting to heat the room
• In a damp room
• If the System is brought directly from a cold to a warm
place
Should this occur, the System may malfunction. In this case,
leave the System turned on for a few hours until the moisture
evaporates, unplug the AC power cord, then plug it in again.
Indicates that you press and hold the
button for specified seconds.
• The number inside the arrow
indicates the period of press (in this
example, 2 seconds).
2 sec.
• If no number is inside the arrow,
press and hold until the entire
procedure is complete or until you
get a result you want.
Others
• Should any metallic object or liquid fall into the System,
unplug the AC power cord and consult your dealer before
operating any further.
Indicates that you turn the control
toward the specified direction(s).
DO NOT disassemble the System since there
are no user serviceable parts inside.
• If you are not going to operate the System for an extended
period of time, unplug the AC power cord from the wall
outlet.
Indicates that this operation is only
possible using the remote control.
Remote
ONLY
Indicates that this operation is only
possible using the buttons and controls on
the main unit.
If anything goes wrong, unplug the AC power cord and
consult your dealer.
Main Unit
ONLY
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1: Unpack
After unpacking, check to be sure that you have all the
following items. The number in parentheses indicates the
quantity of each piece supplied.
• FM antenna (1)
Step 1:Unpack the package and
check the accessories.
• AM loop antenna (1)
• Remote control (1)
• Batteries (2)
If any item is missing, consult your dealer immediately.
Step 2: Prepare the Remote Control
Insert the batteries into the remote control by matching the
polarity (+ and –) correctly.
1
Step 2:Prepare the remote control.
R6(SUM-3)/AA(15F)
2
Step 3:Hook up the components such
as AM/FM antennas, speakers,
etc. (see pages 4 to 6).
3
• DO NOT use an old battery together with a
new one.
• DO NOT use different types of batteries
together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to use
the remote control for an extended period of
time. Otherwise, the remote control will be
damaged from battery leakage.
Finally plug the AC power cord.
Now you can operate the System.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Hook Up
If you need more detailed information, see page 6.
Illustrations of the input/output terminals below are typical
examples.
When you connect other components, refer also to their
manuals since the terminal names actually printed on the rear
may vary.
Turn the power off to all components before connections.
For better FM/AM reception
AM loop antenna
Keep it connected.
Outdoor FM
antenna
(not supplied)
Vynile-covered wire (not supplied)
Extend it horizontally.
Disconnect the supplied FM antenna, and connect to an outdoor FM
antenna using a 75 Ω wire with coaxial type connector.
AUDIO OUT
White
LEFT
RIGHT
Audio cord (not supplied)
AUX
Red
VCR, etc.
To a wall outlet
Plug the AC power cord only after all connections are complete.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FM antenna (supplied)
Extend it so that you can obtain the best
reception.
AM loop antenna (supplied)
Turn it until the best reception is
obtained.
P U S H O P E N
E
S
E R
E V
R
T O
A U
Red
White
5
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect the AM loop antenna
To assemble and connect the AM loop antenna
To assemble the AM loop antenna
1 Hold
3 Release
2 Insert
• If the AM loop antenna wire or speaker cords are covered
with vinyl, remove the vinyl to expose the tip of the
antenna by twisting the vinyl.
• Make sure the antenna conductors do not touch any other
terminals, connecting cords and power cord. Also, keep the
antennas away from metallic parts of the System,
connecting cords, and the AC power cord. This could cause
poor reception.
To connect the speaker cords
Make sure the both speakers are connected correctly and
firmly.
1 Hold
3 Release
2 Insert
When connecting the speaker cords, match the polarity of
the speaker terminals: Red cord to (+) and black cord to (–).
• DO NOT connect more than one speaker to
each terminal.
• DO NOT allow the conductor of the speaker
cords to be in touch with the metallic parts of
the System.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operating the System
The indications on the display teach you a lot of things while you are operating the System.
Before operating the System, be familiar with when and how the indicator illuminates on the display.
3 FM reception indicators
• MONO: lights while receiving an FM stereo station in
monaural.
1
2
3 4
5
• ST (stereo): lights while an FM stereo station with
sufficient signal strength is tuned in.
4 MP3 indicator
SLEEP MONO ST MP3
123 REC
REC
RANDOM
PRGM ALL
• Lights when an MP3 track is detected.
5 REC indicator
A.STANDBY
• Lights while recording.
6 Tape operation indicators
8
6
7
9
•
2 3 (tape direction):
Indications on the main display
–Lights to indicate the current tape running direction.
–Flashes slowly during playback and recording.
–Flashes quickly while rewinding a tape.
(reverse mode):
• While listening to radio:
• While selecting “TAPE”
or “AUX”:
•
ST
–
–
–
: tape play continues endlessly.
: tape automatically reverses once.
: tape play stops at the end of one side.
RDS
Source name
Band
Frequency
7 Disc operation indicators
• While playing a CD/MP3*:
• RANDOM: lights when Random Play mode is activated.
• PRGM (program): lights when Program Play mode is
activated.
•
(repeat)/ALL:
–
–
: lights when One Track Repeat is activated.
Track number
Elapsed playing time
: lights when All Track Repeat is activated.
• While disc play is stopped:
8 Main display
9 A(auto). STANDBY indicator
• Lights when Auto Standby is activated.
• Flashes when disc or tape playback stops with Auto
Standby activated.
CD:
Total track number
Total playing time
MP3:
Group number
Track number
*When you start playing an MP3 disc, the group number,
track number, track name, (and ID3 Tag) will be shown
before the elapsed playing time appears.
1 Rhythm Ax indicator
• Lights when Rhythm Ax is activated.
2 Timer indicators
•
: lights when Daily Timer or Recording Timer stands
by; flashes while setting or working.
• 1/2/3: lights when a Daily Timer (1, 2, or 3) stands by;
flashes while setting or working.
• REC: lights when the Recording Timer stands by; flashes
while setting or working.
• SLEEP: lights when the Sleep Timer is activated.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily Operations—Playback
1 Turn on the power.
The STANDBY/ON lamp on the main unit lights in
green.
• Without pressing STANDBY/ON
turns on by pressing one of the source selecting
buttons in the next step.
, the System
1
10 keys
2 Select the source.
4,7,¢
SET
Playback automatically starts if the selected source is
ready to start.
PRESET UP
PRESET DOWN
GROUP UP
GROUP DOWN
• If you press AUX, start playback source on the
external component.
2
3
REV.
MODE
FM MODE
3 Adjust the volume.
4 Operate the target source as explained
later.
To turn off (stand by) the unit
The STANDBY/ON lamp on the main unit
STANDBY/ON
lights in red.
• A small amount of power is always
consumed even while on standby.
STANDBY/ON
1
2
3
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers. Be sure to turn down the volume before
connecting or putting the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (stand by) the System with
the volume set to an extremely high level;
Otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
VOLUME
4
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
Listening to the Radio
To preset the stations
You can preset 30 FM and 15 AM stations.
To select the band (FM or AM)
1 Tune in to a station you want to preset.
• You can also store the monaural reception mode for FM
preset stations if selected (see above).
FM
AM
2 Activate the preset number entry mode.
SET
To tune in to a station
While FM or AM is selected...
Remote control:
Main unit:
• Finish the following process while the indication on the
display is flashing.
2 sec.
2 sec.
3 Select a preset number for the station you store.
DOWN
UP
Examples:
To select preset number 5, press
5.
To select preset number 15,
press +10, then 5.
1
3
2
5
8
4
6
9
Frequency starts changing on the display.
7
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency changes
step by step.
To select preset number 30,
press +10, +10, then 10.
10
10
• You can also use the PRESET UP/PRESET DOWN
buttons.
To stop searching manually, press either button.
Remote
ONLY
4 Store the station.
If the received FM station is hard to listen
SET
The MONO indicator lights on the display.
Reception will improve though stereo
effect is lost—Monaural reception mode.
To restore the stereo effect, press the
button again (the MONO indicator goes
off).
FM
MODE
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
To tune in to a preset station
Playing Back a Disc
1 Select the band (FM or AM).
This System can play back the following discs—regular CD
and CD-R/CD-RW (recorded either in the audio CD or MP3
format).
FM
AM
To insert a disc
You can insert a disc while playing another source.
2 Select a preset number for the station you store.
• You can also use the
PRESET UP/PRESET
DOWN buttons.
1
3
2
5
8
CD
4
6
9
7
10
10
To close the disc tray, press 0 again.
• If you press 3, disc tray closes automatically and playback
starts.
To start:
To pause:
To stop:
To release, press again.
MP3 groups/tracks configuration
This System plays back MP3 tracks as follows.
Hierarchy
Level 1
ROOT
Level 2
Level 3
Level 4
Level 5
9
01
03
04
10
3
7
02
4
5
6
8
11
12
05
1
2
01
Group with its play order
1
MP3 track with its play order
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To select a track
Playing Back a Tape
Increases the track numbers.
Decreases the track numbers.
To insert a tape
You can play back tapes of types I, II, and IV.
Push
Insert
Close
Remote
ONLY
To select a group (MP3 only)
Before starting playback...
GROUP UP
With the tape side facing outside
Increases the group numbers.
GROUP DOWN
To start:
To stop:
Decreases the group numbers.
Group number and group name appear.
To locate a particular portion
While playing a disc, press and hold until the portion you
want is reached.
To rewind tape:
Before or after play...
Rewind the tape to the right.
Rewind the tape to the left.
PRESET UP
Fast-forwards the track.
PRESET DOWN
Fast-reverses the track.
To change the tape running direction
To locate a track directly and start play
3 (forward play)
2 (reverse play)
Examples:
1
4
3
2
5
8
To select track number 5, press
5.
To select track number 15, press
+10, then 5.
To select track number 30, press
+10, +10, then 10.
6
To reverse the tape automatically
REV.
MODE
9
7
10
10
Tape is played from the forward side to the
reverse side. When the reverse side is played
back, playback stops.
Tape is automatically reversed, and playback
repeats until you stop it.
Tape will not be reversed. When the current
side of the tape reaches its end, playback stops.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily Operations—Sound & Other Adjustments
Adjusting the Volume
Remote control
You can adjust the volume level from level 0 (VOL MIN) to
level 40 (VOL MAX).
Remote control:
Main unit:
VOLUME
SLEEP
CLOCK/
TIMER
VOLUME
DISPLAY
SET
Remote
ONLY
4/¢
To drop the volume in a moment
To restore the volume, press again, or
adjust the volume level.
FADE
MUTING
A.STANDBY
RHYTHM AX
BASS/
TREBLE
DIMMER
FADE
MUTING
VOLUME
+/–
Adjusting the Sound
To emphasize rhythm feeling—RHYTHM AX
This function emphasizes bass attack feeling, and also
changes the subwoofer level.
RHYTHM AX
RHYTHMAX
OFF
(Canceled)
Main unit
To adjust the tone
You can adjust the bass and treble level from –5 to +5.
To adjust the bass
BASS/
TREBLE
TRE
BASS
Canceled
VOLUME
RHYTHM AX
To adjust the treble
BASS
/TREBLE
VOLUME +/–
BASS/
TREBLE
TRE
Canceled
BASS
4/¢
VOLUME
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
Changing the Display Brightness
Turning Off the Power
Remote
ONLY
You can dim the display window.
Automatically
To turn off the unit after playback is over—Auto
Standby
DIMMER
DIM 2
DIM OFF
DIM 1
A.STANDBY
(Canceled)
ON
OFF
(Canceled)
DIM 1
DIM 2
Dims the display.
Erases the display illumination.
When Auto Standby is in use, the A.STANDBY indicator
lights on the display.
When the tape or disc play stops, the A.STANDBY indicator
starts flashing. If no operation is done for about 3 minutes
while the indicator is flashing, the System turns off (stands
by) automatically.
Remote
ONLY
Setting the Clock
Without setting the built-in clock, you cannot use Daily/
Recording Timers (see page 19) and Sleep Timer.
• To exit from the clock setting, press CLOCK/TIMER as
required.
• Auto Standby does not work while you are listening to
radio and the external component (AUX).
• To go back to the previous step, press CANCEL.
To turn off the unit after a certain period of time
—Sleep Timer
1 Activate the clock setting mode.
CLOCK/
TIMER
1 Specify the time (in minutes).
SLEEP
10 20 30 60 90 120 150
Canceled
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
2 Wait until the set time goes off.
2 Adjust the hour.
To check the time remaining until the shut-off time
SET
SLEEP
SLEEP
3 Adjust the minute.
• If you press the button repeatedly, you can change the shut-
off time.
SET
Now the built-in clock starts working.
To check the current time during play
DISPLAY
Clock
Source information
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Disc Operations
Programming the Playing Order—
Remote control
Remote
ONLY
Program Play
You can arrange the playing order of the tracks (up to 50)
before you start playback.
1 Before starting playback, activate Program Play.
PLAY
MODE
10 keys
PROGRAM
RANDOM
Canceled
4,7,¢
CANCEL
CD 6
REPEAT
PRGM
PLAY
MODE
2 Select tracks you want for Program Play.
Examples:
1
3
2
5
8
To select track number 5, press
5.
To select track number 15, press
+10, then 5.
To select track number 30, press
+10, +10, then 10.
4
6
9
7
10
10
3 Start playback.
Main unit
The tracks you have selected are
played back in the order you
have programmed.
To skip a track:
To pause:
To stop:
To release, press
again.
CD 6
4
,7,¢
CD 0
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
To check the programmed contents
Before or after playback...
Playing at Random—Random Play
You can play all tracks at random.
In the programmed order.
1 Before starting playback, activate Random Play.
In the reverse order.
PLAY
MODE
PROGRAM
RANDOM
Canceled
To modify the program
Before or after playback...
To erase the last step:
To erase the entire
program:
RANDOM
CANCEL
2 Start playback.
Playback starts in random order.
Random Play ends when all
tracks are played.
To add steps in the program:
Repeat step 2.
To exit from Program Play
Before or after playback...
To skip a track:
To pause:
To stop:
PLAY
MODE
PROGRAM
RANDOM
Canceled
4 does not work.
To release, press
again.
• Exiting from Program Play erases the stored program.
To exit from Random Play
Before or after playback...
PLAY
MODE
PROGRAM
RANDOM
Canceled
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
3 Select the end point (B).
Playing Repeatedly—Repeat Play
SET
You can repeat playback.
Before starting playback...
A-B Repeat starts. The selected portion plays repeatedly.
REPEAT
ALL
Canceled
To cancel A-B Repeat
(No indication)
REPEAT
ALL
A-B Repeat
While playing...
Canceled
(No indication)
REPEAT
ALL
A-B Repeat
• A-B Repeat will also be canceled when you stop playback.
Canceled
(No indication)
Repeats the current (or specified)
track—One Track Repeat.
Main Unit
ONLY
Prohibiting Disc Ejection—Child Lock
You can lock the disc tray so that no one can eject the loaded
disc.
Repeats all tracks—All Track Repeat.
ALL
• This is possible while the System is on standby.
A-B Repeat See below for details.
“A” starts flashing in the main display.
While the disc tray is closed...
To repeat a particular portion—A-B Repeat
You can repeat a particular portion while playing back a CD.
CD
1 During playback, activate A-B Repeat.
(at the same time)
REPEAT
ALL
A-B Repeat
To cancel the prohibition, repeat the same procedure.
“UNLOCKED” appears on the display.
Canceled
(No indication)
2 Select the start point (A).
SET
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Tape Operations
IMPORTANT
It should be noted that it may be unlawful to re-record
Remote control
pre-recorded tapes, records, or discs without the consent
of the owner of copyright in the sound or video
recording, broadcast or cable programme and in any
literary, dramatic, musical, or artistic embodied therein.
Recording on a Tape
You can use type I tapes for recording.
• To play a tape, see page 11.
7
1 Insert a recordable cassette.
TAPE 2 3
CD 6
FM/AM
AUX
Push
Insert
Close
REV.
MODE
With the tape side facing outside
2 Check the tape running direction and Reverse Mode
settings on the display.
Reverse mode indicator
Main unit
Tape direction indicator
Current source
To change the direction
PUSH OPEN 0
3 (forward)
2 (reverse)
To change the Reverse mode if necessary
REV.
MODE
TAPE 2 3
CD 6
FM/AM
AUX
To record on both sides.
• When using Reverse Mode, start
REC
7
(
)
recording in the forward (3) direction.
To record on only one side.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select and start playing the source—“FM,” “AM,”
To record Program Play or Random Play
1 Select Program Play (and make a program) or Random
Play, but do not start playback.
“CD,” or “AUX.”
• When recording a disc, you can also use “Synchronized
Disc Recording” (see below).
2 Press REC to start recording.
• When CD play stops, recording continues. It is required
that recording be stopped manually.
4 Start recording.
REC
To record only your favorite track
You can specify tracks to be recorded on the tape while
listening to a disc.
On the main unit
1 Start playing a disc.
To stop recording:
2 While a track you want to record on the tape is
playing...
Synchronized Disc Recording
You can start and stop both disc play and tape recording at
the same time.
The CD player returns to the
REC
beginning of that track and the
track is recorded on the tape.
After recording the track, the CD
player and cassette deck
To record the entire disc
On the main unit
automatically stop.
1 Load a disc and insert a recordable cassette.
• If the current playing source is not the CD player, press
CD 3/8, then 7.
3 Repeat steps 2 and 3 to record other tracks you want.
• You can exchange the discs if necessary.
2 Check the tape running direction and Reverse Mode
settings on the display.
To protect your recording
Cassettes have two small tabs on the back to protect
from unexpected erasure or re-recording.
To protect your recording, remove these tabs.
• See step 2 of “Recording on a Tape” on page 17.
3 Start recording.
The System automatically
REC
creates 4-second blanks between
the tunes recorded on the tapes.
On the main unit
To re-record on a protected tape, cover the holes with
adhesive tape.
• When either CD play or recording ends, both CD player
and the cassette deck stop at the same time.
To record a “Live” disc
It will not be desirable to put 4-second blank portions
between the tunes recorded on the tape.
To record the entire disc without any interruption
recorded, pause the disc play (press CD 3/8 twice)
before pressing REC.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Operations
Remote
ONLY
Setting the Timer
Remote control
Using Daily Timer, you can wake up with your favorite
song. On the other hand, with Recording Timer, you can
make a tape of a radio broadcast automatically.
• You can store three Daily Timer settings and one
Recording Timer setting; however, you can activate only
one of Daily Timers and Recording Timer at the same time.
• To exit from the timer setting, press CLOCK/TIMER as
required.
STANDBY/ON
CLOCK/
TIMER
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
SET
4/¢
PRESET
UP/DOWN
1 Select one of the timer setting modes you want to set—
Daily 1 ON time, Daily 2 ON time, Daily 3 ON time, or
Recording Timer ON time.
CANCEL
Daily 1 Timer
Daily 2 Timer
Daily 3 Timer
CLOCK/
TIMER
Daily 1*
ON (Time) Daily 2*
ON (Time) Daily 3*
ON (Time)
ON (Time)
Canceled
Clock setting
REC
(see page 13)
Recording Timer
1
Ex. When Daily Timer 1 setting mode is selected
2 Make the timer setting as you want.
For Daily Timers:
1
Set the hour then the minute for on-time.
SET
2
Select the playback source—“TUNER,” “CD,” or
“TAPE.”
SET
1
*Daily Timer initial settings when shipped from the
factory
•Daily 1: ON Time (AM6:00)/Source (TUNER)/
Volume level (8)
•Daily 2: ON Time (AM7:00)/Source (TUNER)/
Volume level (8)
•Daily 3: ON Time (AM10:00)/Source (TUNER)/
Volume level (8)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select the volume level.
4
Select the volume level.
SET
SET
• You can select the volume level (“VOLUME 0” to
“VOLUME 40” and “VOLUME – –”). If you select
“VOLUME – –,” the volume is set to the last level
when the unit has been turned off.
• You can select the volume level (“VOLUME 0” to
“VOLUME 40” and “VOLUME – –”). If you select
“VOLUME – –,” the volume is set to the last level
when the unit has been turned off.
For Recording Timer:
1
2
3
Set the hour then the minute for on-time.
3 Turn off the unit (on standby) if you have set the timer
with the System turned on.
SET
STANDBY/ON
Set the hour then the minute for off-time.
SET
Select a preset station number.
• Select “FM” or “AM,” then a preset number.
PRESET UP
SET
PRESET DOWN
Select the band.
Select a preset
number.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn off the Timer after its setting is done
Since Daily Timer is activated at the same time everyday,
you may need to cancel it on some particular days.
• Recording Timer can also be canceled temporarily.
How Daily Timer actually works
Once the Daily Timer has been set, the timer (
indicator and timer number indicator (1/2/3) are lit on the
display. Daily Timer is activated at the same time
everyday until the timer is turned off manually (see the
next column) or another Daily Timer is activated.
)
1 Select the Timer you want to cancel.
Daily 1 Timer
Daily 2 Timer
Daily 3 Timer
CLOCK/
TIMER
When the on-time comes
Daily 1
ON (Time)
Daily 2
ON (Time)
Daily 3
ON (Time)
The System turns on, tunes in to the last received station
or start playing the loaded disc, and sets the volume level
to the preset level.
ON (Time)
Canceled
Clock setting
REC
(see page 12)
Recording Timer
About one hour after the playback starts, the System
stops it, and turns off (stands by) automatically.
• The timer setting remains in memory until you change
it.
Ex.When Daily
Timer 1
1
• Without canceling the Daily Timer, you can change the
source or adjust the volume after Daily Timer starts
playback.
The current set source and on time appears.
2 Turn off the selected Timer.
CANCEL
How Recording Timer actually works
When Recording Timer has been set, Timer (
)
indicator and the REC indicator are lit on the display.
Recording Timer works only once.
To turn on the Timer again, repeat the above steps and
press in step 2...
SET
When the on-time comes
The System turns on, tunes in to the specified station, sets
the volume level to the preset level, and starts recording.
When the off-time comes
The System stops recording, and turns off (stands by).
• The timer setting remains in memory until you change
it.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Advanced Disc Operations (see pages 14 to 16)
Programming the Playing Order—Program Play:
• You cannot specify a group number of an MP3 disc for
Program Play.
• If you try to program a 51st track, “FULL” appears on the
display.
• While programming steps...
Learning More about This System
Daily Operations—Playback (see pages 8 to 11)
Listening to the Radio:
• If you store a new station into an occupied preset number, the
previously stored station in that number will be erased.
• When you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If this
happens, preset the stations again.
Your entry will be ignored if you have tried to program an item
number that does not exist on the disc (for example, selecting
track 14 on a disc that only has 12 tracks).
Playing Back a Disc:
• When using an 8 cm disc, place it on the inner circle of the disc
tray.
• This System cannot play “packet write” discs.
• For MP3 playback...
– MP3 discs are required a longer readout time than regular
CDs. (It depends on the complexity of the group/file
configuration.)
– Some MP3 files cannot be played back and will be skipped.
This result from their recording processes and conditions.
– When making MP3 discs, use ISO 9660 Level 1 or Level 2
for the disc format.
– This system can play back MP3 files with the extension code
<.mp3> (regardless of the letter case—upper/lower).
– It is recommended that you make each MP3 file at a
sampling rate of 44.1 kHz and at bit rate of 128 kbps. This
System cannot play back files made at bit rate of less than 64
kbps.
– This System can recognize the total of 255 tracks and of 64
groups. Those exceeding the maximum number cannot be
recognized.
Advanced Tape Operations (see pages 17 to 18)
Recording on a Tape:
• The recording level is automatically set correctly. Thus, you
can adjust the sound you are actually listening to without
affecting the recording level.
• There is leader tape which cannot be recorded onto at the start
and end of cassette tapes. Thus, when recording CDs or radio
broadcasts, wind the leader tape first to ensure that the
recording will be made without any music part lost.
• If you start recording with no cassette inserted, “NO TAPE”
appears on the display. If a protected tape has been inserted,
“NO REC” appears.
• When using Reverse Mode for recording, start recording in the
forward (3) direction first; otherwise, recording will stop
when only one side (reverse) of the tape is recorded.
• You can also change Reverse Mode setting (
after starting recording.
and
)
• You cannot open or close the disc tray while recording.
Synchronized Disc Recording:
• When the tape reaches its end in the forward direction (3)
– Playback order of MP3 tracks may be different from the one
you have intended while recording (see page 10). If a folder
does not include MP3 tracks, they are ignored.
during recording with Reverse Mode set to
, the last tune
will be re-recorded at the beginning of the reverse side.
• You cannot open the cassette holder during Synchronized
Disc Recording.
Playing Back a Tape:
• It is not recommended to use the C-120 or longer tapes. These
tapes easily jams in the pinch rollers and the capstans, and may
cause characteristic deterioration.
Timer Operations (see pages 19 to 21)
• When you unplug the AC power cord or if a power failure
occurs, the timer will be canceled. You need to set the clock
first, then the timer again.
• Without stopping the recording, you cannot change the source
after Recording Timer start recording.
Daily Operations—Sound & Other Adjustments
(see pages 12 to 13)
Adjusting the Volume:
• If you set the Sleep Timer after Daily Timer starts playing the
selected source, Daily Timer is canceled.
• Be sure to turn down the volume before connecting or putting
the headphones.
• If you set the Sleep Timer after Recording Timer starts
recording, Recording Timer is canceled, but recording
continues until Sleep Timer shuts off the power.
Adjusting the Sound:
• This function also affects the sound through the headphones.
• This function does not affect recording.
Setting the Clock:
• “AM12:00” will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Operations:
Daily Timer and Recording Timer do not work.
] The System has been turned on when the on-time comes.
Timer starts working only when the System is turned off.
Troubleshooting
If you are having a problem with your System, check this list
for a possible solution before calling for service.
General:
Maintenance
Adjustments or settings are suddenly canceled before
you finish.
To get the best performance of the System, keep your discs,
tapes, and mechanism clean.
] There is a time limit. Repeat the procedure again.
Operations are disabled.
Handling discs
• When removing the disc from its case, hold it at the edge while
pressing the center hole lightly.
] The built-in microprocessor may malfunction due to
external electrical interference. Unplug the AC power cord
and then plug it back in.
• Do not touch the shiny surface of the disc, or bend the disc.
• Put the disc back in its case after use to prevent warping.
• Be careful not to scratch the surface of the disc.
• Avoid exposure to direct sunlight, temperature extremes, and
moisture.
Unable to operate the System from the remote control.
] The path between the remote control and the remote sensor
on the System is blocked.
] The batteries are exhausted.
No sound is heard.
] Speaker connections are incorrect or loose.
] Headphones are connected.
To clean the disc:
Wipe the disc with a soft cloth in a straight line from center to
edge.
Radio Operations:
Hard to listen to broadcasts because of noise.
] Antennas connections are incorrect or loose.
] The AM loop antenna is too close to the System.
] The FM antenna is not properly extended and positioned.
Handling cassette tapes
• If the tape is loose in its cassette, take up the slack by inserting
a pencil in one of the reels and rotate it.
– If the tape is loose, it may get stretched, cut, or caught in the
cassette.
• Be careful not to touch the tape surface.
• Avoid the following places to store the tape—in dusty places,
in direct sunlight or heat, in moist areas, on a TV or speaker,
or near a magnet.
Disc Operations:
The disc does not play.
] The disc is placed upside down. Place the disc with the label
side up.
To keep the best recording and playback sound quality
• Use a cotton swab moistened with alcohol to clean the heads,
capstans, and pinch rollers.
• Use a head demagnetizer (available at electronics and audio
shops) to demagnetize the heads (when the System turned off).
ID3 Tag on an MP3 disc cannot be shown.
] There are two types of ID3 Tag—Version 1 and Version 2.
This System can only show ID3 Tag Version 1.
MP3 groups and tracks are not played back as you
expect.
] The playing order is determined when the disc was
recorded. It depends on the writing application.
Cleaning the System
• Stains should be wiped off with a soft cloth. If the System is
heavily stained, wipe it with a cloth soaked in water-diluted
neutral detergent and wrung well, then wipe clean with a dry
cloth.
The disc sound is discontinuous.
] The disc is scratched or dirty.
The disc tray does not open or close.
] The AC power cord is not plugged in.
] Child Lock is in use (see page 16).
• Since the System may deteriorate in quality, it become
damaged or get its paint peeled off, be careful about the
following:
– DO NOT wipe it with a hard cloth.
– DO NOT wipe it strongly.
– DO NOT wipe it with thinner or benzine.
– DO NOT apply any volatile substance such as insecticides
to it.
Tape Operations:
The cassette holder cannot be opened.
] Power supply from the AC power cord has been cut off
while the tape was running. Turn on the System.
– DO NOT allow any rubber or plastic to remain in contact for
a long time.
Recordings:
Impossible to record.
] Small tabs on the back of the cassette are removed. Cover
the holes with adhesive tape.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Parts Index
Refer to the pages to see how to use the buttons and controls.
Amplifier section
Output Power:
40 W (20 W + 20 W) at 4 Ω (10% THD)
Speakers/Impedance: 4 Ω – 16 Ω
Remote control
Audio Input
AUX:
400 mV/50 kΩ
STANDBY/ON
Tuner section
1
4
7
2
5
8
3
FM tuning range: 87.5 MHz – 108.0 MHz
8
SLEEP
AM (MW) tuning range: 530 kHz – 1 710 kHz
6
13
CLOCK/
TIMER
10, 11
11
9
13, 19
13
CD player section
Dynamic range: 88 dB
DISPLAY
SET
10
10
PRESET UP
11
GROUP UP
Signal-to-noise ratio: 93 dB
Wow and flutter: Immeasurable
13, 19
11
10
9, 13, 14, 19
9, 13, 14, 19
GROUP DOWN
CANCEL
PRESET DOWN
15, 19
11
8, 10, 11
Cassette deck section
Frequency response
Normal (type I): 50 Hz – 14 000 Hz
Wow and flutter: 0.15% (WRMS)
REV.
MODE
FM
9
13
11
16
REPEAT
A.STANDBY
RHYTHM AX
MODE
PLAY
MODE
14, 15
BASS/
TREBLE
Speakers
Speaker units: 10 cm cone x 1
Impedance: 4 Ω
Dimensions (approx.): 145 mm x 230 mm x 191 mm
(5 3/4 in. x 9 1/16 in. x 7 9/16 in.)
(W/H/D)
12
12
13
DIMMER
FADE
MUTING
8, 12
12
VOLUME
RM-SFSP400J REMOTE CONTROL
Mass (approx.): 1.8 kg (4.0 lbs) each
Supplied Accessories
See page 3.
Main unit
General
Power requirement: AC 120 V
,60 Hz
Power consumption: 50 W (at operation)
1.4 W (on standby)
11
Dimensions (approx.): 170 mm x 230 mm x 311 mm
(6 3/4 in. x 9 1/16 in. x 12 1/4 in.)
(W/H/D)
7
Mass (approx.): 4.5 kg (10.0 lbs)
12
12
Remote
sensor
STANDBY/ON
BASS
RHYTHM AX
AUX
/TREBLE
VOLUME
8
CD
TAPE
FM/AM
8, 10,
11, 14
8, 12
REC
DOWN
UP
18
CD
10,16
9, 13,
14, 19
8
PHONES
24
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
EN, FR
0304AIMMDWJEM
© 2004 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
|