JVC Digital Camera GR DVL322 User Manual

ENGLISH

CONTENTS

AUTOMATIC DEMONSTRATION

GETTING STARTED

7 – 14

TAPE

DIGITAL VIDEO CAMERA

RECORDING & PLAYBACK

15 – 24

TAPE RECORDING ........................ 16 – 20

TAPE PLAYBACK .......................... 21 – 24

MEMORY CARD

GR-DVL1020

GR-DVL820

GR-DVL522

GR-DVL322

RECORDING & PLAYBACK

25 – 36

MEMORY CARD RECORDING ......... 26 – 27

MEMORY CARD PLAYBACK ............ 28 – 29

ADVANCED FEATURES .................... 30 – 36

ADVANCED FEATURES

37 – 66

FOR RECORDING ........................... 38 – 45

USING MENUS FOR

DETAILED ADJUSTMENT .............. 46 – 51

DUBBING ..................................... 52 – 53

USING THE REMOTE CONTROL UNIT... 54 – 64

SYSTEM CONNECTIONS.................. 65 – 66

REFERENCES

67 – Back Cover

DETAILS ............................................. 68

TROUBLESHOOTING ...................... 69 – 73

USER MAINTENANCE ............................ 74

CAUTIONS .................................... 75 – 77

SPECIFICATIONS ........................... 78 – 79

INDEX ......................................... 80 – 86

TERMS ............................... 87 – Back Cover

Please visit our Homepage on the World Wide Web and

answer our Consumer Survey (in English only):

http://www.jvc-victor.co.jp/english/index-e.html

For Accessories:

http://www.jvc-victor.co.jp/english/accessory/

The camcorder illustrations

appearing in this instruction

manual are of the

GR-DVL1020.

Memory card recording

features are available on

GR-DVL1020, GR-DVL820

and GR-DVL522

INSTRUCTIONS

LYT0964-001A

Download from Www.Somanuals.com. All Manuals Search And Download.

Dear Customer,

Thank you for purchasing this digital video camera. Before use, please read the safety information and

precautions contained in the following pages to ensure safe use of this product.

Using This Instruction Manual

• All major sections and subsections are listed in the Table Of Contents on the cover page.

• Notes appear after most subsections. Be sure to read these as well.

• Basic and advanced features/operation are separated for easier reference.

It is recommended that you . . .

..... refer to the Index (੬ pgs. 80 – 86) and familiarize yourself with button locations, etc. before use.

..... read thoroughly the Safety Precautions. They contain extremely important information regarding the safe use

of this product.

You are recommended to carefully read the cautions on pages 75 through 77 before use.

SAFETY PRECAUTIONS

WARNING:

CAUTION:

TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.

CAUTIONS:

● If you notice smoke or a peculiar smell coming from

the camcorder or AC Adapter, shut it down and

unplug it immediately. Continue using the

camcorder or AC Adapter under these conditions

could lead to fire or electric shock. Contact your

JVC dealer. Do not attempt to repair the malfunction

yourself.

● To prevent shock, do not open the cabinet. No

user serviceable parts inside. Refer servicing to

qualified personnel.

To avoid electric shock or damage to the unit,

first firmly insert the small end of the power

cord into the AC Adapter until it is no longer

wobbly, and then plug the larger end of the

power cord into an AC outlet.

● When you are not using the AC Adapter for a

long period of time, it is recommended that you

disconnect the power cord from AC outlet.

NOTES:

● The rating plate (serial number plate) and safety

caution are on the bottom and/or the back of the

main unit.

● The rating information and safety caution of the

AC Adapter are on its upper and lower sides.

Download from Www.Somanuals.com. All Manuals Search And Download.

CAUTIONS:

● This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for

playback with a television of a different standard. However, live recording and LCD monitor/viewfinder

playback are possible anywhere.

●

Use the JVC BN-V408U/V416U/V428U battery packs and, to recharge them or to supply power to the

camcorder from an AC outlet, use the provided multi-voltage AC Adapter and Power Cord. (An appropriate

conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)

When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides

to allow for ventilation (10 cm or more on both sides, on top and at the rear).

Do not block the ventilation holes.

(If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.)

No naked flame sources, such as lighted candles, should be placed on the apparatus.

When discarding batteries, environmental problems must be considered and the local rules or laws

governing the disposal of these batteries must be followed strictly.

The apparatus shall not be exposed to dripping or splashing.

Do not use this equipment in a bathroom or places with water.

Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases,

potted plants, cups etc.) on top of this unit.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFETY PRECAUTIONS

Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the

malfunctioning of internal circuitry. There is also a risk of fire or electric shock.

CAUTION!

The following notes concern possible physical damage to the camcorder and to the user.

When carrying, be sure to always securely attach and use the provided shoulder strap. Carrying or holding the

camcorder by the viewfinder and/or the LCD monitor can result in dropping the unit, or in a malfunction.

Take care not to get your finger caught in the cassette holder cover. Do not let children operate the camcorder, as

they are particularly susceptible to this type of injury.

Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder.

CAUTION!

Connecting cables (Audio/Video, S-Video, etc.) to the camcorder and leaving the unit on top of the TV is not

recommended, as tripping on the cables will cause the camcorder to fall, resulting in damage.

Ⅲ This camcorder is designed exclusively for the digital video cassette, SD Memory Card and

MultiMediaCard. Only cassettes marked “

” can be used with this unit.

” and memory cards* marked “

” or

“

Before recording an important scene . . .

.... make sure you only use cassettes with the Mini DV mark

.... make sure you only use memory cards* with the mark

.... remember that this camcorder is not compatible with other digital video formats.

.... remember that this camcorder is intended for private consumer use only. Any commercial use without

proper permission is prohibited. (Even if you record an event such as a show, performance or

exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)

* Memory cards can be used with GR-DVL1020/DVL820/DVL522 only.

Download from Www.Somanuals.com. All Manuals Search And Download.

PROVIDED ACCESSORIES

AAA (R03) Battery

x 2 (for remote

control unit)

Power Cord

Battery Pack

BN-V408U

AC Adapter AP-V10EG or

AP-V12EG

Lens Cap

(See below for

attachment)

Shoulder Strap

CD-ROM

Remote

Control Unit

RM-V717U

PC Connection Cable

(GR-DVL322 only)

Memory Card 8 MB

(GR-DVL1020/DVL820/

DVL522 only) (Already

inserted in the

USB Cable (GR-DVL1020/

DVL820/DVL522 only)

camcorder)

Audio/Video Cable

(ø3.5 mini-plug to

RCA plug)

Editing Cable

GR-DVL322:

One plug has 3 rings

around the pin, and the

other has 1 ring around

the pin.

GR-DVL1020/DVL820/

DVL522:

Both plugs have 1 ring

around the pin.

Lens hood (Already

attached to the camcorder;

GR-DVL1020/DVL820 only)

Core Filter x 1

(for optional S-Video

cable ੬ pg. 6 for

attachment)

NOTE:

In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more

core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

How To Attach The Lens Cap

To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.

NOTE:

To confirm the lens cap is on correctly make sure the cap is flush to the camera.

For GR-DVL1020/

DVL820 Owners:

The lens cap can be

attached only when

the lens hood is

attached to the

camcorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

How To Attach The Core Filter

Attach the Core Filter(s) (if provided with your model ੬ pg. 5) to an optional cable(s). The Core Filter

reduces interference.

3 cm

Stopper

Wind once

Release the

stoppers on both

ends of the Core

Filter.

Run the cable through the Core Filter, leaving approx.

3 cm of cable between the cable plug and the Core Filter.

Wind the cable once around the outside of the Core Filter

as shown in the illustration.

Close the Core Filter until it

clicks shut.

• Wind the cable so that it is not slack.

NOTE:

Take care not to damage the cable.

Ⅲ When connecting cables, attach the end with the Core Filter to the camcorder.

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO

MENU/BRIGHT Wheel

MODE” is set to “ON” (factory-preset).

Ⅲ Automatic Demonstration starts when there is no operation for

AUTO

about 3 minutes after the Power Switch is set to “

” or

MANUAL

“

” and no cassette is in the camcorder.

Ⅲ Performing any operation during the demonstration stops the

demonstration temporarily. If no operation is performed for more

than 3 minutes after that, the demonstration will resume.

Ⅲ “DEMO MODE” remains “ON” even if the camcorder power is

turned off.

Ⅲ To cancel Automatic Demonstration:

1. Set the Power Switch to “

Power Switch

Lock Button

MANUAL

” while pressing down the

Lock Button located on the switch and press the MENU/

BRIGHT wheel in. The Menu Screen appears.

Sub Menu

2. Rotate the MENU/BRIGHT wheel to select “

SYSTEM”

and press it. The SYSTEM Menu appears.

3. Rotate the MENU/BRIGHT wheel to select “DEMO MODE”

DEMO MODE

–

OFF

and press it. The Sub Menu appears.

4. Rotate the MENU/BRIGHT wheel to select “OFF” and press it.

5. Rotate the MENU/BRIGHT wheel to select “

RETURN”,

and press it twice. The normal screen appears.

NOTE:

GR-DVL1020/DVL820/DVL522

only

If you do not detach the Lens Cap, you cannot see the actual changes of the

Automatic Demonstration activated on the LCD monitor or viewfinder.

Download from Www.Somanuals.com. All Manuals Search And Download.

GETTING STARTED

CONTENTS

Power.................................................. 8 – 9

Grip Adjustment ......................................... 10

Viewfinder Adjustment.................................. 10

Shoulder Strap Attachment ............................. 10

Tripod Mounting.......................................... 10

Date/Time Settings...................................... 11

Loading/Unloading A Cassette ......................... 12

Recording Mode Setting ................................. 13

Loading A Memory Card

(GR-DVL1020/DVL820/DVL522 only) ....................... 14

Picture Quality/Image Size Setting

(GR-DVL1020/DVL820/DVL522 only) ....................... 14

Download from Www.Somanuals.com. All Manuals Search And Download.

GETTING STARTED (cont.)

BATT. RELEASE Button

Power

This camcorder’s 2-way power supply system lets

you choose the most appropriate source of power. Do

not use provided power supply units with other

equipment.

CHARGING THE BATTERY PACK

Tilt the viewfinder upward 1. With the arrow on

the battery pack pointing downward, push the battery

pack slightly against the battery pack mount 2, then

slide down the battery pack until it locks in place 3.

Power Switch

Set the Power Switch to “OFF”. Connect the AC

Adapter to the camcorder 4, then connect the Power

Cord to the AC Adapter 5.

CHARGE Lamp

Plug the Power Cord into an AC outlet 6.

The CHARGE lamp on the camcorder blinks to

indicate charging has started.

When the CHARGE lamp stops blinking but stays

lit, charging is finished. Unplug the Power Cord from

the AC outlet. Disconnect the AC Adapter from the

camcorder.

To Detach The Battery Pack . . .

..... Press BATT. RELEASE and pull out the battery

pack.

NOTES:

● If the protective cap is attached to the battery pack,

remove it first.

Battery pack

● During charging, the camcorder cannot be operated.

● Charging is not possible if the wrong type of battery is

used.

● When charging the battery pack for the first time or

after a long storage period, the CHARGE lamp may not

light. In this case, remove the battery pack from the

camcorder, then try charging again.

AC Adapter

● If the battery operation time remains extremely short

even after having been fully charged, the battery is

worn out and needs to be replaced. Please purchase a

new one.

● Using the optional AA-V40 AC Power Adapter/Charger,

you can charge the BN-V408U/V416U/V428U battery

pack without the camcorder. However, it cannot be

used as an AC adapter.

connector

To DC

To AC outlet

Battery pack

BN-V408U

Charging time

approx. 1 hr. 30 min.

approx. 3 hrs.

BN-V416U (optional)

BN-V428U (optional)

approx. 5 hrs.

For other notes, ੬ pg. 68

Download from Www.Somanuals.com. All Manuals Search And Download.

ATTENTION

USING THE BATTERY PACK

Before detaching the power source, make sure that

the camcorder’s power is turned off. Failure to do so

can result in a camcorder malfunction.

Perform step 1 of “CHARGING THE BATTERY

PACK” (੬ pg. 8).

Approximate recording time

<GR-DVL522/DVL322>

NOTES:

● Recording time is reduced significantly under the

following conditions:

Battery pack LCD monitor on

Viewfinder on

• Zoom or Record-Standby mode is engaged

repeatedly.

• The LCD monitor is used repeatedly.

• The playback mode is engaged repeatedly.

● Before extended use, it is recommended that you

prepare enough battery packs to cover 3 times the

planned shooting time.

BN-V408U

1 hr.

(35 min.)

1 hr. 15 min.

(40 min.)

BN-V416U

(optional)

2 hrs.

(1 hr. 10 min.)

2 hrs. 30 min.

(1 hr. 20 min.)

BN-V428U

(optional)

3 hrs. 30 min.

(2 hrs.)

4 hrs. 20 min.

(2 hrs. 20 min.)

BN-V840U

(optional)

5 hrs.

6 hrs. 10 min.

(2 hrs. 50 min.)

(3 hrs. 20 min.)

INFORMATION

BN-V856U

(optional)

7 hrs.

(4 hrs.)

8 hrs. 40 min.

(4 hrs. 40 min.)

The extended-use battery pack kit is a set composed

of a battery pack and AC Power Adapter/Charger:

VU-V840 KIT: BN-V840U battery pack & AA-V15 AC

Power Adapter/Charger

(

) : when the video light is on

VU-V856 KIT: BN-V856U battery pack & AA-V80 AC

Power Adapter/Charger

Approximate recording time

<GR-DVL1020/DVL820>

Read the kit's instruction manual before using.

Also, by using the optional JVC VC-VBN856U DC

Cord, it will be possible to connect BN-V840U or BN-

V856U battery packs to the camcorder and supply

power directly to the camcorder.

Battery pack LCD monitor on

Viewfinder on

BN-V408U

55 min.

(35 min.)

1 hr. 10 min.

(45 min.)

BN-V416U

(optional)

1 hr. 55min.

(1 hr. 15 min.)

2 hrs. 25 min.

(1 hr. 30 min.)

BN-V428U

(optional)

3 hrs. 25 min.

(2 hrs. 15 min.)

4 hrs. 20 min.

(2 hrs. 40 min.)

BN-V840U

(optional)

4 hrs. 25 min.

(2 hrs. 55 min.)

5 hrs. 40 min.

(3 hrs. 30 min.)

BN-V856U

(optional)

6 hrs. 40 min.

(4 hrs. 15 min.)

8 hrs. 30 min.

(5 hrs. 5 min.)

(

) : when the video light is on

USING AC POWER

Use the AC Adapter (connect as shown in the

illustration).

NOTES:

● The provided AC Adapter features automatic voltage

selection in the AC range from 110 V to 240 V.

● For other notes, ੬ pg. 68.

To AC outlet

AC Adapter

To DC connector

Download from Www.Somanuals.com. All Manuals Search And Download.

10EN

GETTING STARTED (cont.)

Grip Adjustment

2 ^{Separate the Velcro strip.}

Pass your right hand through the loop and grasp

Power

Zoom Lever

the grip.

Recording

Start/Stop button

Adjust your thumb and fingers through the grip, to

easily operate the Recording Start/Stop button and

Power Switch and Power Zoom Lever. Be sure to

fasten the Velcro strip to your preference.

Power Switch

Viewfinder Adjustment

AUTO

MANUAL

Set the Power Switch to “

” or “

”

Dioptre

Adjustment Control

while pressing down the Lock Button located on the

switch.

Turn the Dioptre Adjustment Control until the

indications in the viewfinder are clearly focused.

PAUSE

Shoulder Strap Attachment

Make sure the battery pack is removed. Following

the illustration, thread the strap through the eyelet 1,

then fold it back and thread it through the buckle 2.

Repeat the procedure to attach the other end of the

strap to the other eyelet 3 located under the Grip

Strap. Confirm the strap is not twisted.

Tripod Mounting

CAUTION

When attaching the camcorder to a tripod, extend its

legs to stabilise the camcorder. It is not advised to

use small sized tripods. This may cause damage to

the unit by falling over.

To attach the camcorder to a tripod, align the

direction stud and screw to the mounting socket and

stud hole on the camcorder. Then tighten the screw

clockwise. Some tripods are not equipped with studs.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 11

MENU/BRIGHT Wheel

Power Lamp

Date/Time Settings

The date/time is recorded onto the tape at all times,

but its display can be turned on or off during playback

(੬ pg. 50, 51).

MANUAL

” while pressing

down the Lock Button located on the switch. The

power lamp lights and the camcorder is turned on.

Set the Power Switch to “

Press the MENU/BRIGHT wheel in to access the

Menu Screen.

Rotate the MENU/BRIGHT wheel to select

DISPLAY”. Press it and the DISPLAY Menu

appears.

“

Power Switch

Rotate the MENU/BRIGHT wheel to select

“CLOCK ADJ.”. Press it and “day” is highlighted.

Rotate the MENU/BRIGHT wheel to input the day.

Press it. Repeat to input the month, year, hour and

minute.

Lock Button

Display

Rotate the MENU/BRIGHT wheel to select

W I P E / FADER

PROGRAM AE

EXPOSURE

W. BALANCE

CAMERA

MANUAL

SYSTEM

D I SPLAY

DSC

“

RETURN”, and press it twice. The Menu Screen

closes.

NOTE:

Even if you select “CLOCK ADJ.”, if the parameter is not

highlighted the camcorder’s internal clock continues to

operate. Once you move the highlight bar to the first date/

time parameter (day), the clock stops. When you finish

setting the minute and press the MENU/BRIGHT wheel

in, the date and time begin operation from the date and

time you just set.

END

GR-DVL1020/DVL820/

DVL522 only

DISPLAY Menu

ON SCREEN

DATE / T I ME

T I ME CODE

CLOCK

–

LCD / TV

AUTO

OFF

2 5 . 12 . 02

17 : 3 0

ADJ .

RETURN

CLOCK

ADJ .

2 5 . 12 . 02

17 : 3 0

Download from Www.Somanuals.com. All Manuals Search And Download.

12EN

GETTING STARTED (cont.)

Loading/Unloading A Cassette

The camcorder needs to be powered up to load or

eject a cassette.

Erase protection tab*

Make sure the

window side is

facing out.

Slide and hold OPEN/EJECT in the direction of

the arrow then pull the cassette holder cover open

until it locks. The cassette holder opens automatically.

• Do not touch internal components.

Cassette holder

Insert or remove a tape and press “PUSH HERE”

to close the cassette holder.

• Once the cassette holder is closed, it recedes

automatically. Wait until it recedes completely before

closing the cassette holder cover.

• When the battery’s charge is low, you may not be

able to close the cassette holder cover. Do not apply

force. Replace the battery with a fully charged one

before continuing.

OPEN/EJECT

Switch

Close the cassette holder cover firmly until it

locks into place.

Cassette holder cover

PUSH HERE

Approximate recording time

* To Protect Valuable Recordings . . .

.... slide the erase protection tab on the back of the

tape in the direction of “SAVE”. This prevents the

tape from being recorded over. To record on this

tape, slide the tab back to “REC” before loading it.

Recording mode

Tape

30 min.

60 min.

80 min.

30 min.

60 min.

80 min.

45 min.

90 min.

120 min.

Be sure to press only the section labeled “PUSH

HERE” to close the cassette holder; touching other

parts may cause your finger to get caught in the

cassette holder, resulting in injury or product damage.

NOTES:

● It takes a few seconds for the cassette holder to open. Do not apply force.

● If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again. If the

cassette holder still does not open, turn the camcorder off then on again.

● If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few minutes later,

insert it again.

● When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the

cassette holder cover.

● Closing the cassette holder cover before the cassette holder comes out may cause damage to the camcorder.

● Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is closed

with the camcorder switched off, however, it may not recede. It is recommended to turn the power on before loading or

unloading.

● When resuming recording, once you open the cassette holder cover a blank portion will be recorded on the tape or a

previously recorded scene will be erased (recorded over) regardless of whether the cassette holder came out or not.

See page 20 for information about recording from the middle of a tape.

● Loosen the Grip Strap if it appears to interfere with the cassette holder cover operation (੬ pg. 10).

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 13

MENU/BRIGHT Wheel

Power Lamp

Recording Mode Setting

Set the tape recording mode depending on your

preference.

MANUAL

” while pressing

down the Lock Button located on the switch. The

power lamp lights and the camcorder is turned on.

Set the Power Switch to “

Press the MENU/BRIGHT wheel in. The Menu

Screen appears.

Rotate the MENU/BRIGHT wheel to select

CAMERA” and press it. The CAMERA Menu

appears.

“

Power Switch

Rotate the MENU/BRIGHT wheel to select “REC

MODE” and press it. The Sub Menu appears. Select

“SP” or “LP” by rotating the MENU/BRIGHT wheel

and press it. Rotate the MENU/BRIGHT wheel to

Lock Button

select “

RETURN”, and press it twice. The Menu

Screen closes.

Display

• Audio Dubbing (੬ pg. 63) and Insert Editing

(੬ pg. 64) are possible on tapes recorded in the

SP mode.

• “LP” (Long Play) is more economical, providing

1.5 times the recording time.

Menu Screen

Sub Menu

REC MODE

–

NOTES:

● If the recording mode is switched during recording, the

playback picture will be blurred at the switching point.

● It is recommended that tapes recorded in the LP mode

on this camcorder be played back on this camcorder.

● During playback of a tape recorded on another

camcorder, blocks of noise may appear or there may be

momentary pauses in the sound.

GR-DVL1020/DVL820/DVL522 only

Download from Www.Somanuals.com. All Manuals Search And Download.

14EN

GETTING STARTED (cont.)

MENU/BRIGHT Wheel

Power Switch

Display

QUAL I TY

I MAGE S I ZE

REC SELECT

–

F I NE

1024X768

Lock Button

Card Cover

Label

Clipped edge

Power Lamp

RETURN

Memory card

Loading A Memory Card

Picture Quality/Image Size Setting

(GR-DVL1020/DVL820/DVL522 only)

The Picture Quality/Image Size can be selected to

best match your needs. Refer to the chart on page 27

for your selection.

The provided memory card is already inserted in the

camcorder when you receive the camcorder.

2 ^{Make sure the camcorder’s power is off.}

Press PUSH OPEN and open the LCD monitor,

Set the VIDEO/MEMORY Switch to “MEMORY”,

then set the Power Switch to “

down the Lock Button located on the switch. The

power lamp lights and the camcorder turns on.

MANUAL

” while pressing

then open the card cover (MEMORY CARD).

Insert the memory card clipped edge first.

• Do not touch the terminal on the reverse side of the

label.

Press the MENU/BRIGHT wheel in. The Menu

Screen appears.

Rotate the MENU/BRIGHT wheel to select

DSC” and press it. The DSC Menu appears.

To close the card cover, push it until you hear a

click.

“

Rotate the MENU/BRIGHT wheel to select

To Unload A Memory Card . . .

“QUALITY” and press it. The Sub Menu appears.

Rotate the MENU/BRIGHT wheel to select the

desired mode and press it.

..... in step 3 push the memory card, which then

comes out of the camcorder automatically. Pull it

out and close the card cover.

Rotate the MENU/BRIGHT wheel to select

NOTES:

“IMAGE SIZE” and press it. The Sub Menu appears.

Rotate the MENU/BRIGHT wheel to select the

desired mode and press it.

● Be sure to use only SD Memory Cards marked

“

” or MultiMediaCards marked

”.

● Some brands of memory cards are not compatible with

this camcorder. Before purchasing a memory card ,

consult its manufacturer or dealer.

● Before using a new memory card, it is necessary to

FORMAT the card. ੬ pg. 36.

Rotate the MENU/BRIGHT wheel to select

RETURN”, and press it twice. The Menu Screen

closes.

“

ATTENTION

Do not insert/remove the memory card while the

camcorder is turned on, as this may cause the

memory card to be corrupted or cause the camcorder

to become unable to recognize whether or not the

card is installed.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 15

TAPE RECORDING & PLAYBACK

TAPE RECORDING

PLAYBACK

CONTENTS

TAPE RECORDING ......................... 16 – 20

Basic Recording..................................... 16

Journalistic Shooting ............................... 17

Self-Recording ...................................... 17

Operation Mode .................................... 17

Zooming ............................................ 18

Video Light ......................................... 19

Time Code ........................................... 20

TAPE PLAYBACK ........................... 21 – 24

Normal Playback ................................... 21

Still Playback ....................................... 21

Shuttle Search ...................................... 21

Frame-By-Frame Playback ........................ 21

Connections .................................. 22 – 23

Blank Search ........................................ 24

Download from Www.Somanuals.com. All Manuals Search And Download.

16EN

TAPE RECORDING

Basic Recording

Power lamp

NOTE:

Power Switch

You should already have performed the procedures

listed below. If not, do so before continuing.

● Power (੬ pg. 8)

● Grip Adjustment (੬ pg. 10)

● Viewfinder Adjustment (੬ pg. 10)

● Load A Cassette (੬ pg. 12)

● Recording Mode Setting (੬ pg. 13)

Remove the lens cap.

During

shooting

GR-DVL1020/DVL820/DVL522 only: Press PUSH

OPEN, open the LCD monitor and set the VIDEO/

MEMORY Switch to “VIDEO”.

Lock Button

Recording Start/Stop Button

AUTO

MANUAL

Set the Power Switch to “

” or “

”

while pressing down the Lock Button located on the

switch.

Display

Shooting while using the LCD monitor: Make sure

the LCD monitor is fully open. Tilt it upward/

downward for best viewability.

25min

Tape remaining time

indicator (Approximate)

Shooting while using the viewfinder: Close the

LCD monitor.

• The power lamp lights and the camcorder enters the

Record-Standby mode. “PAUSE” is displayed.

min

3 min

90 min

0 min

89 min

(Now calculating)

Press the Recording Start/Stop Button. “

”

1 min

(Blinking)

2 min

(Blinking)

appears while recording is in progress.

(Blinking)

To Stop Recording . . .

..... press the Recording Start/Stop Button. The

camcorder re-enters the Record-Standby mode.

BR I GHT

To Adjust The Brightness Of The Display . . .

..... rotate the MENU/BRIGHT wheel until the bright

level indicator on the display moves and the

appropriate brightness is reached.

MENU/BRIGHT Wheel

• If you are using GR-DVL1020, it is also possible to

adjust the brightness of the viewfinder by closing the

LCD monitor and adjusting as described above.

180°

90°

NOTES:

● If the Record-Standby mode continues for 5 minutes,

the camcorder’s power shuts off automatically. To turn

the camcorder on again, set the Power Switch to

AUTO

MANUAL

“OFF”, then back to “

” or “

”.

● The image will not appear simultaneously on the LCD

monitor and the viewfinder. It will appear in the

viewfinder when the LCD monitor is in the lock position,

and it will appear on the LCD monitor when fully

extended.

VIDEO/MEMORY Switch

(GR-DVL1020/DVL820/

DVL522 only)

PUSH OPEN Button

● When a blank portion is left between recorded scenes

on the tape, the time code is interrupted and errors may

occur when editing the tape. To avoid this, refer to

“Recording from the middle of a tape” (੬ pg. 20).

● To turn the tally lamp or beep sounds off, ੬ pg. 46,

48.

Tally lamp

(lights while

recording is in

progress)

For other notes, ੬ pg. 68

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 17

JOURNALISTIC SHOOTING

In some situations, different shooting angles may

provide more dramatic results. Hold the camcorder in

the desired position and tilt the LCD monitor in the

most convenient direction. It can rotate 270° (90°

downward, 180° upward).

Self-

Recording

SELF-RECORDING

You can shoot yourself while viewing your own image

in the LCD monitor. Open the LCD monitor and tilt it

upward 180° so that it faces forward, then point the

lens toward yourself and start recording.

To turn on the camcorder, set the Power Switch to

any operation mode except “OFF”while pressing

down the Lock Button located on the switch.

Operation Mode

Choose the appropriate operation mode according to

your preference using the Power Switch and VIDEO/

MEMORY Switch (GR-DVL1020/DVL820/DVL522

only).

Power Switch

Power lamp

MANUAL

AUTO

Power Switch Position

Lock Button

OFF

PLAY

MANUAL

Allows you to set various recording functions using

the Menus. If you want more creative capabilities than

Full Auto recording, try this mode.

AUTO

(Full Auto):

Allows you to record using NO special effects or

manual adjustments. Suitable for standard recording.

OFF:

Allows you to switch off the camcorder.

PLAY:

VIDEO/MEMORY Switch

(GR-DVL1020/DVL820/DVL522 only;

open the LCD monitor to access this

switch.)

• Allows you to play back a recording on the tape.

• Allows you to transfer a still image recorded on the

tape to a computer (GR-DVL322 only).

• Allows you to access data stored on the memory

card or to transfer a still image stored on the

memory card to a computer (GR-DVL1020/DVL820/

DVL522 only).

VIDEO/MEMORY Switch Position

(GR-DVL1020/DVL820/DVL522 only)

When the Power Switch is set to “ ^AUTO”, “ ” appears.

VIDEO:

MANUAL

When set to “

” or “PLAY”, there is no indication.

• Allows you to record on a tape or play back a tape.

If “REC SELECT” is set to “

” in the

DSC Menu Screen, still images are recorded on the

memory card as well.

• Zoom magnification over 10X is available

(੬ pg. 18, 47).

(GR-DVL1020/DVL820/DVL522 only)

1024

MEMORY:

Allows you to record on a memory card or access

data stored on a memory card.

When the Power Switch is set to “ ^AUTO” or “

” and

MANUAL

the VIDEO/MEMORY Switch is set to “MEMORY”, the

currently selected image size appears. When set to

“VIDEO”, there is no indication.

Download from Www.Somanuals.com. All Manuals Search And Download.

18EN

TAPE RECORDING (cont.)

Zoom in (T: Telephoto)

FEATURE: Zooming

PURPOSE:

10x

To produce the zoom in/out effect, or an instanta-

20x

40x

neous change in image magnification.

OPERATION:

Zoom In

Slide the Power Zoom Lever towards “T”.

Zoom Out

Zoom out (W: Wide angle)

Slide the Power Zoom Lever towards “W”.

Ⅲ The further you slide the Power Zoom Lever, the

quicker the zoom action.

Zoom display

NOTES:

10x

● Focusing may become unstable during Zooming. In

this case, set the zoom while in Record-Standby,

lock the focus by using the manual focus

(੬ pg. 43), then zoom in or out in Record mode.

● Zooming is possible to a maximum of 700X, or it

can be switched to 10X magnification using the

optical zoom (੬ pg. 47).

Digital zoom zone

10X (optical) zoom

zone

● Zoom magnification of over 10X is done through

Digital image processing, and is therefore called

Digital Zoom.

Approximate zoom ratio

● During Digital zoom, the quality of image may

suffer.

Power Zoom Lever

● Digital zoom cannot be used when the VIDEO/

MEMORY Switch is set to “MEMORY” (੬ pg. 17).

● Macro shooting (as close as approx. 5 cm to the

subject) is possible when the Power Zoom Lever is

set all the way to “W”. Also see “TELE MACRO” in

the Menu Screen on page 48.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 19

FEATURE: Video Light

PURPOSE:

To brighten the scene when natural lighting is too

dim.

OPERATION:

Set LIGHT OFF/AUTO/ON as required:

OFF : Turns off the light.

AUTO : Automatically turns on the light when the

camcorder senses insufficient lighting on

the subject.

LIGHT OFF/AUTO/ON Switch

(Open the LCD monitor to

access this switch.)

: Always keeps the light on as long as the

camcorder is turned on.

Ⅲ The video light can only be used with the

camcorder’s power on.

Ⅲ It is recommended to set the white balance

DANGER

(੬ pg. 45) to

when you use the video light.

Ⅲ The video light can become extremely

Ⅲ When not using the video light, turn it off to save

battery power.

hot. Do not touch it either while in

operation or soon after turning it off,

otherwise serious injury may result.

NOTES:

● Even if the battery indicator (

) does not blink

due to low battery charge, the camcorder may turn

off automatically when you turn on the video light, or

when you start recording with the video light turned

on.

● When LIGHT OFF/AUTO/ON is set to “AUTO”:

• Depending on the lighting conditions, the video

light may keep turning on and off. In this case,

manually switch the light on or off using LIGHT

OFF/AUTO/ON.

• While the “SHUTTER” or “SPORTS” mode

(੬ pg. 39) is engaged, the light is likely to stay

on.

• While the “TWILIGHT” mode (੬ pg. 39) is

engaged, the light will not activate.

Ⅲ Do not place the camcorder into the carrying case

immediately after using the video light, since it remains

extremely hot for some time.

Ⅲ When operating, keep a distance of about 30 cm

between the video light and people or objects.

Ⅲ Do not use near flammable or explosive materials.

Ⅲ Do not place the camcorder in a cabinet or box while

the video light is in operation.

Ⅲ When using the video light, if you wish to install the

camcorder in a fixed position, attach it to a tripod, etc.

Do not affix it directly to a surface such as a table top.

Ⅲ It is recommended that you consult your nearest JVC

dealer for replacing the video light.

• While the “Night-Scope” mode (੬ pg. 38) is

engaged, the light will not activate.

Download from Www.Somanuals.com. All Manuals Search And Download.

20EN

TAPE RECORDING (cont.)

Time Code

During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded

scene on the tape during playback.

If recording starts from a blank portion, the time code begins counting from “00:00:00”

(minute:second:frame). If recording starts from the end of a previously recorded scene, the time code

continues from the last time code number.

To perform Random Assemble Editing (੬ pg. 58 – 62), time code is necessary. If during recording a blank

portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time

code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes

as those existing in a previously recorded scene. To prevent this, perform “Recording From The Middle of A

Tape” below in the following cases;

• When shooting again after playing back a

recorded tape.

• When power shuts off during shooting.

• When a tape is removed and re-inserted during

shooting.

Display

Frames are not displayed

during recording.

Minutes

• When shooting using a partially recorded tape.

• When shooting on a blank portion located

partway through the tape.

• When shooting again after shooting a scene

then opening/closing the cassette holder cover.

Seconds

Frames

(25 frames = 1 second)

12 : 34 : 24

Recording From The Middle Of A Tape

1. Play back a tape or use Blank Search (੬ pg. 24) to find the spot at which you want to start recording,

then engage the Still Playback mode (੬ pg. 21).

AUTO

MANUAL

” while pressing down the Lock Button located on the switch,

2. Set the Power Switch to “

” or “

then start recording.

NOTES:

● The time code cannot be reset.

● During fast-forwarding and rewinding, the time code indication does not move smoothly.

● The time code is displayed only when “TIME CODE” is set to “ON” (੬ pg. 49, 50).

When a blank portion is recorded on a tape

Time code

00:00:00

Time code

05:43:21

Time code

00:00:00

Tape

Already recorded scene

Blank

Newly recorded scene

Shooting start point

Shooting stop point

Shooting start point

Proper recording

Time code

00:00:00

Time code

05:43:21

Time code

05:44:00

Tape

Already recorded scene

New scene

Latest scene

Shooting start point

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 21

TAPE PLAYBACK

Stop Button (5)

Rewind Button (

Play/Pause Button (

Fast-Forward Button (

Normal Playback

)

2 ^{Load a tape (੬ pg. 12).}

Set the VIDEO/MEMORY Switch to “VIDEO”

(GR-DVL1020/DVL820/DVL522 only), then set the

Power Switch to “PLAY” while pressing down the Lock

/6)

)

Button located on the switch. To start playback, press

Power Zoom Lever (VOL.)

• To stop playback, press 5.

• Press

during Stop mode.

to rewind, or

to fast-forward the tape

VIDEO/MEMORY Switch

(GR-DVL1020/DVL820/

DVL522 only; open the

LCD monitor to access

this switch.)

To Control The Speaker Volume . . .

..... slide the Power Zoom Lever (VOL.) towards “+”

to turn up the volume, or towards “–” to turn down

the volume.

Speaker

NOTES:

● If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To

turn on again, set the Power Switch to “OFF”, then to “PLAY”.

● The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (੬ pg. 22).

● You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.

● LCD monitor/viewfinder indications:

• When power is supplied from a battery: the “

” battery pack remaining power indicator is displayed.

When power is supplied from an AC outlet: “

” does not appear.

• During Stop mode, none of the indications are displayed.

● When a cable is connected to the AV connector, the sound is not heard from the speaker.

Still Playback: Pauses during playback.

1) Press

4/6 during playback.

2) To resume normal playback, press

4/6 again.

● If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.

After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

● When

Shuttle Search: Allows high-speed search in either direction.

1) Press for forward or for reverse search during playback.

4/6 is pressed, the image may not pause immediately while the camcorder stabiliseds the still image.

2) To resume normal playback, press /6.

● During playback, press and hold or

release it, normal playback resumes.

3. The search continues as long as you hold the button. Once you

● A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Frame-By-Frame Playback: Allows frame-by-frame search.

1) Engage Still Playback.

2) Rotate the MENU/BRIGHT wheel towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse

Frame-By-Frame Playback during Still Playback.

● To resume normal playback, press

4/6.

● You can also use the provided remote control for Frame-By-Frame Playback (੬ pg. 56).

Slow-Motion Playback/Playback Special Effects and Playback Zoom

Available only with the remote control (provided) (੬ pg. 56, 57).

ATTENTION

During Shuttle Search, parts of the picture may not be clearly visible, particularly on

the left side of the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

22EN

TAPE PLAYBACK (cont.)

Connections

These are some basic types of connections. When making the connections, refer also to your VCR and TV

instruction manuals.

A. Connection to a TV or VCR equipped with an S-VIDEO IN and A/V input

connectors

To AV

To TV or VCR

Audio/Video cable

(provided)

White to

AUDIO L IN**

Connector cover*

Red to

AUDIO R IN**

Yellow:

Not connected

To S-VIDEO

VCR

S-Video cable

(optional)

To S-VIDEO IN

* When connecting the cables, open this cover.

** The Audio cable is not required for watching still images only.

B. Connection to a TV or VCR equipped only with A/V input connectors

To TV or VCR

To AV

White to

AUDIO L IN**

Audio/Video cable

(provided)

Red to

AUDIO R IN**

Connector cover*

VCR

Yellow to

VIDEO IN

* When connecting the cables, open this cover.

** The Audio cable is not required for watching still images only.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 23

NOTES:

2 ^{Make sure all units are turned off.}

in the illustration (੬ pg. 22).

If using a VCR . . . go to step 3.

If not . . . go to step 4.

Connect the camcorder to a TV or VCR as shown

● It is recommended to use the AC Adapter as the

power supply instead of the battery pack (੬ pg. 9).

● To monitor the picture and sound from the camcorder

without inserting a tape or memory card*, set the

AUTO

MANUAL

camcorder’s Power Switch to “

” or “

”,

then set your TV to the appropriate input mode.

* GR-DVL1020/DVL820/DVL522 only

● Make sure you adjust the TV sound volume to its

minimum level to avoid a sudden burst of sound when

the camcorder is turned on.

● If you have a TV or speakers that are not specially

shielded, do not place the speakers adjacent to the TV

as interference will occur in the camcorder playback

picture.

● While the Audio/Video cable is connected to the AV

connector, sound cannot be heard from the speaker.

● If no image is displayed or no sound is heard from the

TV, set “S/AV INPUT” to “OFF” in the Menu Screen

(GR-DVL1020/DVL820 only, ੬ pg. 50).

Connect the VCR output to the TV input, referring

to your VCR’s instruction manual.

5 ^{Turn on the camcorder, the VCR and the TV.}

Set the VCR to its AUX input mode, and set the

TV to its VIDEO mode.

To choose whether or not the following displays

appear on the connected TV . . .

• Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (੬ pg. 50).

Or, press DISPLAY on the remote control

(provided) to turn on/off the date indication.

• Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (੬ pg. 50).

• Playback Sound Mode, Tape Speed And Tape

Running Displays for tape playback

..... set “ON SCREEN” to “LCD” or “LCD/TV” in the

Menu Screen (੬ pg. 50).

Download from Www.Somanuals.com. All Manuals Search And Download.

24EN

TAPE PLAYBACK (cont.)

BLANK Button

Blank Search

Helps you find where you should start recording in

the middle of a tape to avoid time code interruption

(੬ pg. 20).

2 ^{Load a tape (੬ pg. 12).}

Set the VIDEO/MEMORY Switch to “VIDEO”

(GR-DVL1020/DVL820/DVL522 only), then set the

Power Switch to “PLAY” while pressing down the

Lock Button located on the switch.

Press BLANK.

Power Switch

Lock Button

• “BLANK SEARCH” appears blinking and the

camcorder automatically starts reverse or forward

shuttle search, then stops at the spot which is about

3 seconds of tape before the beginning of the

detected blank portion.

Display

To cancel Blank Search midway . . .

..... press 5.

NOTES:

BLANK SEARCH

● In step 3, if the current position is at a blank portion the

camcorder searches in the reverse direction, and if the

current position is at a recorded portion the camcorder

searches in the forward direction.

● Blank Search does not work if “HEAD CLEANING

REQUIRED. USE CLEANING CASSETTE” has

appeared with the tape.

● If the beginning or end of the tape is reached during

Blank Search, the camcorder stops automatically.

● A blank portion which is shorter than 5 seconds of tape

may not be detected.

● The detected blank portion may be located between

recorded scenes. Before you start recording, make sure

there is no recorded scene after the blank portion.

VIDEO/MEMORY Switch (GR-DVL1020/

DVL820/DVL522 only; open the LCD

monitor to access this switch.)

Stop Button (5)

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 25

MEMORY CARD RECORDING & PLAYBACK

MEMORY CARD

RECORDING

PLAYBACK

Memory Card recording features are

available on GR-DVL1020,GR-DVL820

and GR-DVL522.

CONTENTS

MEMORY CARD RECORDING .........26 – 27

Basic Shooting (Snapshot) ............... 26 – 27

MEMORY CARD PLAYBACK ...........28 – 29

Normal Playback .................................. 28

Auto Playback ..................................... 28

Index Playback .................................... 29

Viewing File Information ......................... 29

Removing On-Screen Display .................... 29

ADVANCED FEATURES ....................30 – 36

Protecting Files .................................... 30

Deleting Files ...................................... 31

Dubbing Still Images Recorded On A Tape To A

Memory Card ....................................... 32

E-Mail Clip Recording ............................. 33

Setting Print Information

(DPOF Setting)............................. 34 – 35

Making A New Folder ............................ 36

Initialising A Memory Card ...................... 36

Download from Www.Somanuals.com. All Manuals Search And Download.

26EN

MEMORY CARD RECORDING

SNAPSHOT Button

Basic Shooting (Snapshot)

You can use your camcorder as a digital still camera

for taking snapshots.

NOTE:

You should already have performed the procedures listed

below. If not, do so before continuing.

● Power (੬ pg. 8)

● Grip Adjustment (੬ pg. 10)

● Viewfinder Adjustment (੬ pg. 10)

● Loading A Memory Card (੬ pg. 14)

● Picture Quality/Image Size Setting (੬ pg. 14)

Power Switch

Set the VIDEO/MEMORY Switch to “MEMORY”,

AUTO

MANUAL

then set the Power Switch to “

” or “

”

Lock Button

while pressing down the Lock Button located on the

switch.

VIDEO/MEMORY Switch (Open the

LCD monitor to access this switch.)

Press SNAPSHOT. “PHOTO” appears while the

snapshot is being taken.

The image is recorded on the memory card.

• Still images are recorded in the snapshot mode with

no frame.

Image Size

Displays the image file size: 1280 (1280 x 960)*, 1024 (1024 x 768) or 640 (640 x 480)

(੬ pg. 14).

* GR-DVL1020/DVL820 only.

Shooting icon

Appears and blinks during shooting.

Card icon

Appears during shooting and blinks when a memory card is not loaded:

(SD Memory Card) or

(MultiMediaCard).

1024

Remaining number of shots

Displays the remaining number of shots that can be stored.

The number increases or decreases depending on the Picture Quality/Image Size, etc.

Picture Quality

Displays the quality of image: F (Fine) or S (Standard) (in order of quality) (੬ pg. 14).

Display

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 27

To Delete Unwanted Still Images . . .

FULL

..... when unwanted still images are stored in the

memory card or its memory is full, refer to “Deleting

Files” (੬ pg. 31) and delete unwanted still images.

Snapshot mode with no

frame

To Remove The Shutter Sound . . .

..... when you do not want to hear the shutter sound,

set “BEEP” to “OFF” in the Menu Screen

(੬ pg. 46, 48). The sound is no longer heard

from the speaker.

There is the sound of a shutter closing.

NOTES:

● Even if “DIS” is set to “ON” (੬ pg. 47), the Stabilisedr

will be disabled.

● If Snapshot recording is not possible, “PHOTO” blinks

when SNAPSHOT is pressed.

To Protect Valuable Files (available only for SD

Memory Card) . . .

● If Programme AE with special effects (੬ pg. 38) is

engaged, certain modes of Programme AE with special

effects are disabled during Snapshot recording. In such

a case, the icon blinks.

Write/erase protection tab

● If shooting is not performed for approx. 5 minutes when

AUTO

MANUAL

the Power Switch is set to “

” or “

” and

. . . slide the write/erase protection tab on the side

of the memory card in the direction of

power is supplied from the battery pack, the camcorder

shuts off automatically to save power. To perform

shooting again, set the Power Switch to “OFF”, then to

“LOCK”. This prevents the memory card from

being recorded over. To record on this

memory card, slide the tab back to the

AUTO

MANUAL

“

” or “

”.

● The Motor Drive mode (੬ pg. 42) is disabled when the

VIDEO/MEMORY Switch is set to “MEMORY”.

● Still images taken are compliant to DCF (Design rule for

Camera File system). They do not have any

compatibility with devices which are not compliant to

DCF.

position opposite to “LOCK” before loading it.

Approximate Number of Storable Images <GR-DVL522>

SD Memory Card

MultiMediaCard

Image Size/Picture

Quality

8MB

16MB

32MB

64MB

190

8MB

16MB

32MB

100

1024 x 768/FINE

1024 x 768/

STANDARD

320

215

645

145

310

205

605

405

160

105

640 x 480/FINE

640 x 480/

STANDARD

160

295

625

1215

190

320

Approximate Number of Storable Images <GR-DVL1020/DVL820>

SD Memory Card

MultiMediaCard

Image Size/Picture

Quality

8MB

16MB

32MB

64MB

120

8MB

16MB

32MB

1280 x 960/FINE

1280 x 960/

STANDARD

205

405

190

100

200

100

1024 x 768/FINE

1024 x 768/

STANDARD

320

210

640

145

310

205

605

405

160

105

640 x 480/FINE

640 x 480/

STANDARD

150

295

625

1215

160

320

NOTE:

The number of storable images depends on the selected picture quality as well as the composition of the subjects in the

images and the type of memory card being used.

Download from Www.Somanuals.com. All Manuals Search And Download.

28EN

MEMORY CARD PLAYBACK

Normal Playback

Rewind Button (

Play/Pause Button

/6)

(

2 ^{Load a memory card (੬ pg. 14).}

then set the Power Switch to “PLAY” while pressing

down the Lock Button.

Set the VIDEO/MEMORY Switch to “MEMORY”,

Stop Button (5)

Fast-Forward Button

(3)

• The type of file played back last time is played.

If you want to select another type of file, go to

step 3. If not, go to step 4.

Press SELECT. The MEMORY SELECT Screen

appears. Rotate the MENU/BRIGHT wheel to select

the type of file: IMAGE or E-MAIL CLIP (੬ pg. 33).

Then press the MENU/BRIGHT wheel in. The

selected type of file is displayed.

SELECT Button

If you are viewing an IMAGE file . . .

MANUAL

AUTO

Press to display the next image, or press

VIDEO/MEMORY Switch

(Open the LCD monitor

to access this switch.)

display the previous image.

OFF

If you are viewing an E-MAIL CLIP file . . .

PLAY

Press

4/6 to play back the displayed video clip. To

stop video clip playback, press 5.

Lock Button

Power Switch

NOTES:

● Pressing INFO gives you details on the displayed

file (੬ pg. 29, “Viewing File Information”).

● You can also overview several files at a time

(੬ pg. 29, Index Playback).

● You can turn off the on-screen playback display

(੬ pg. 29, “Removing On-Screen Display”).

[For Normal Playback: IMAGE]

To display the

next image

To display the

previous image

Auto Playback

You can run through all the images stored on memory

automatically.

2 ^{Perform steps 1 and 2 above.}

Press

4/6.

• If you press

during Auto Playback, images are

displayed in descending order.

• If you press during Auto Playback, images are

displayed in ascending order.

To end Auto Playback, press 5.

Display

NOTES:

● Even if you shoot a new image after playing back a low-

numbered one, this will not overwrite an existing image,

because new images are automatically stored after the

last-recorded one.

[For Auto Playback: IMAGE]

● Images shot in a file size that is not compatible with this

camcorder will be displayed as reduced-size thumbnail

images. These thumbnail images cannot be transferred

to a PC.

Normal Playback:

E-MAIL CLIP

● Images shot with devices (such as JVC GR-DVX70)

that are not compatible with DCF cannot be viewed with

this camcorder; “UNSUPPORTED FILES” will be

displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 29

MENU/BRIGHT Wheel

INFO Button

Index Playback

INDEX Button

You can view several different files stored on the

memory card at a time. This browsing capability

makes it easy to locate a particular file you want.

2 ^{Perform steps 1 through 3 of “Normal Playback”.}

3 ^{Press INDEX. The Index Screen appears.}

Rotate the MENU/BRIGHT wheel to move the

frame to the desired file.

• Pressing

displays the next page and

displays the previous page.

• Pressing INFO gives you details on the currently

selected file (੬ “Viewing File Information”).

SELECT Button

Selected image

Index number

Press the MENU/BRIGHT wheel in. The selected

file is displayed.

• Pressing INFO gives you details on the displayed

file (੬ “Viewing File Information”).

Index Screen

Viewing File Information

You can get the relevant file information by pressing

the INFO button during normal playback or Index

playback.

DCF

:Folder and file number

(IMAGE files only)

FOLDER :Folder name (੬ pg. 36)

Info Screen

FILE

DATE

SIZE

:File name (੬ pg. 36)

:Date the file was made

:Image size (੬ pg. 14)

DCF

: 1 0 0 - 0 0 1 0

: 1 0 0 JVCGR

: DVC0 0 0 1 0

: 2 7 . 3 . 0 2

FOLDER

F I LE

DATE

S I ZE

QUALITY :Picture quality

(IMAGE files only ੬ pg. 14)

:Playback time

: 1 0 2 4X7 6 8

QUAL I TY : F I NE

PROTECT : OFF

TIME

(E-MAIL CLIP files only ੬ pg. 33)

PROTECT :When set to ON, the file is protected

from accidental erasure (੬ pg. 30).

Operation mode indicator

• Press INFO again to close the Info Screen.

Battery indicator

Playback Screen

NOTE:

With images shot with another device or processed on a

PC, “QUALITY: – – –” will be displayed.

Removing On-Screen Display

Perform steps 1 and 2 of “Normal Playback”

(੬ pg. 28).

Make sure an IMAGE file is displayed

(੬ pg. 28); if not, press SELECT to access the

MEMORY SELECT Screen. Rotate the MENU/

BRIGHT wheel to select “IMAGE” and press it.

Menu Screen

Press the MENU/BRIGHT wheel in. The Menu

Screen appears. Rotate the MENU/BRIGHT wheel to

select “DISPLAY”, then press it.

D I SPLAY OFF

4 Rotate the MENU/BRIGHT wheel to select “OFF”,

then press it. The operation mode indicator and

battery indicator ( ) disappear.

RETURN

• To display the indicators again, select “ON” in step

Download from Www.Somanuals.com. All Manuals Search And Download.

30EN

ADVANCED FEATURES

MENU/BRIGHT Wheel

Protecting Files

The Protect mode helps prevent the accidental

erasure of files.

2 ^{Load a memory card (੬ pg. 14).}

Set the VIDEO/MEMORY Switch to “MEMORY”,

then set the Power Switch to “PLAY” while pressing

down the Lock Button located on the switch.

• A stored file is displayed.

If you want to select another type of file, go to

step 3. If not, go to step 4.

Power Switch

Lock Button

Press SELECT. The MEMORY SELECT Screen

appears. Rotate the MENU/BRIGHT wheel to select

the type of file: IMAGE or E-MAIL CLIP (੬ pg. 33).

Then press the MENU/BRIGHT wheel in. The

selected type of file is displayed.

VIDEO/MEMORY Switch

(Open the LCD monitor

to access this switch.)

Press the MENU/BRIGHT wheel in. The Menu

Screen appears. Rotate the MENU/BRIGHT wheel to

select “PROTECT”, then press it.

Rotate the MENU/BRIGHT wheel to select the

desired mode.

CURRENT : Protects the currently displayed file.

PROT.ALL : Protects all files stored on the memory

card.

Press the MENU/BRIGHT wheel in. The

PROTECT Screen appears.

• If you selected “CURRENT” in step 5, press

SELECT Button

Menu Screen

to select the desired file.

Display

Rotate the MENU/BRIGHT wheel to select

“EXECUTE” and press it.

PROTECT

DELETE

DPOF

• To cancel protection, select “RETURN”.

NOTES:

NO . RESET

FORMAT

D I SPLAY

● If the “

” mark appears, the currently displayed file is

protected.

● When the memory is initialised or corrupted, even

protected files are deleted. If you do not want to lose

important files, transfer them to a PC and save them.

END

TO REMOVE PROTECTION

Before doing the following, perform steps 1 through 4

PROTECT

CURRENT

PROT . ALL

CANC . ALL

above.

RETURN

Rotate the MENU/BRIGHT wheel to select the

desired mode.

CURRENT : Removes protection from the currently

displayed file.

PROTECT Screen

CANC.ALL : Removes protection from all files stored

on the memory card.

PROTECT

Press the MENU/BRIGHT wheel in. The

PROTECT Screen appears.

• If you selected “CURRENT”, press

select the desired file.

PROTECTED

RETURN

7Rotate the MENU/BRIGHT wheel to select

“EXECUTE” and press it.

• To cancel selection, select “RETURN”.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 31

MENU/BRIGHT Wheel

Deleting Files

Previously stored files can be deleted either one at a

time or all at once.

2 ^{Load a memory card (੬ pg. 14).}

Set the VIDEO/MEMORY Switch to “MEMORY”,

then set the Power Switch to “PLAY” while pressing

down the Lock Button located on the switch.

• A stored file is displayed.

If you want to select another type of file, go to

step 3. If not, go to step 4.

Power Switch

Lock Button

Press SELECT. The MEMORY SELECT Screen

appears. Rotate the MENU/BRIGHT wheel to select

the type of file: IMAGE or E-MAIL CLIP (੬ pg. 33).

Then press the MENU/BRIGHT wheel in. The

selected type of file is displayed.

VIDEO/MEMORY Switch

(Open the LCD monitor

to access this switch.)

Press the MENU/BRIGHT wheel in. The Menu

Screen appears. Rotate the MENU/BRIGHT wheel to

select “DELETE”, then press it.

Rotate the MENU/BRIGHT wheel to select the

desired mode.

CURRENT : Deletes the currently displayed file.

ALL

: Deletes all files stored on the memory

card.

Press the MENU/BRIGHT wheel in. The DELETE

Screen appears.

SELECT Button

Menu Screen

• If you selected “CURRENT” in step 5, press

Display

to select the desired file.

Rotate the MENU/BRIGHT wheel to select

“EXECUTE” and press it.

DELETE

CURRENT

ALL

• If the “

” mark appears, the selected file is

protected and cannot be deleted

(੬ pg. 30).

• To cancel deletion, select “RETURN”.

RETURN

NOTES:

● Protected files (੬ pg. 30) cannot be deleted with the

above operation. To delete them, remove protection

first.

DELETE Screen

DELETE

● Once files are deleted, they cannot be restored. Check

files before deleting.

DELETE?

EXECUTE

RETURN

CAUTION

Do not remove the memory card or perform any other

operation (such as turning off the camcorder) during

deletion. Also, be sure to use the provided AC

Adapter, as the memory card may be corrupted if the

battery becomes exhausted during deletion. If the

memory card becomes corrupted, initialise it.

(੬ pg. 36)

Download from Www.Somanuals.com. All Manuals Search And Download.

32EN

ADVANCED FEATURES (cont.)

SNAPSHOT Button

Dubbing Still Images Recorded On A Tape

To A Memory Card

Still images can be dubbed from a tape to a memory

card.

Load a memory card (੬ pg. 14) and cassette

(੬ pg. 12).

Set the VIDEO/MEMORY Switch to “VIDEO”,

then set the Power Switch to “PLAY” while pressing

down the Lock Button.

Press the MENU/BRIGHT wheel in. The Menu

Power Switch

Lock Button

Screen appears. Rotate it to select “

press it. The VIDEO Menu appears.

VIDEO” and

Rotate the MENU/BRIGHT wheel to select

COPY” and press it. The Sub Menu

appears. Rotate it to select “ON” and press it.

Selection is complete.

“

Display

Menu Screen

Rotate the MENU/BRIGHT wheel to select “

RETURN” and press it twice. The normal playback

screen reappears.

COPY

–

OFF

To select a video image to be dubbed, start

playback by pressing /6. At the moment you find

the image you wish to dub, press it again to engage

Still Playback.

To start dubbing, press SNAPSHOT. The selected

image is stored on the memory card.

• “ ” blinks during dubbing.

NOTES:

● If SNAPSHOT is pressed in step 7 when a memory

card is not loaded, the message “COPYING FAILED” is

displayed.

● If an image recorded on the tape using the WIDE mode

(੬ pg. 48) is dubbed to a memory card, the WIDE

mode identifying signal is not dubbed with it.

● To use Playback Special Effects with a video image you

wish to dub, perform up to step 7 using the remote

control (provided) (੬ pg. 56).

Play/Pause Button (

4/6)

Stop Button (5)

MENU/BRIGHT Wheel

● Images are dubbed in 640 x 480 pixels.

E-MAIL Button

VIDEO/MEMORY Switch

(Open the LCD monitor

to access this switch.)

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 33

Display

E-Mail Clip Recording

160

E-

MAIL CLIP

35mi n

00 : 00

STANDBY

Remaining time

(GR-DVL1020/DVL820 only)

You can make video clips from real-time camera

image or recorded video footage and store them in a

memory card as files which can be conveniently sent

via e-mail.

Shooting starts when the

Recording Start/Stop

Button is pressed

TO MAKE VIDEO CLIPS FROM REAL-TIME

CAMERA IMAGE

160

E-MAIL CLIP

35mi n

00 : 15

REC

Load a memory card (੬ pg. 14). Set the VIDEO/

MEMORY Switch to “MEMORY”, then set the Power

AUTO

MANUAL

” while pressing down

Switch to “

” or “

the Lock button located on the switch.

Press E-MAIL. The camcorder enters the E-Mail

Clip Record-Standby mode.

Shooting stops when the

Recording Start/Stop

Button is pressed again

Press the Recording Start/Stop Button to start

shooting.

Press the Recording Start/Stop Button to stop

COMPLETED

shooting. “COMPLETED” is displayed, then the

camcorder re-enters the E-Mail Clip Record-Standby

mode.

Press E-MAIL to end E-Mail Clip Recording. The

normal screen reappears.

Recording is complete

To view video clips stored on a memory card . . .

..... ੬ pg. 28, 29.

TO MAKE VIDEO CLIPS FROM RECORDED

VIDEO FOOTAGE

Load a memory card (੬ pg. 14) and cassette

NOTES:

(੬ pg. 12). Set the VIDEO/MEMORY Switch to

“VIDEO”, then set the Power Switch to “PLAY”

while pressing down the Lock Button located on the

switch.

● Approximate maximum recording time per video clip is

3 minutes.

● Video clips are stored in 160 x 120-pixel format.

● Playback operation cannot be performed during E-Mail

Clip Recording.

● If the end of the tape is reached in step 3, the E-Mail

Clip Record-Standby mode will be automatically

cancelled.

● The video clip files made with this camcorder are

MPEG4 compliant, however, some MPEG4 files made

with other devices may not be played back with this

camcorder.

● You can delete unwanted video clips (੬ pg. 31,

“Deleting Files”) or protect important ones from

accidental erasure (੬ pg. 30, “Protecting Files”).

● Video noise may appear while viewing video clips in the

LCD monitor or viewfinder, however, this noise is not

present in the actual video clips stored on the memory

card.

4/6 to start tape playback.

3 ^Press

Press E-MAIL. “E-MAIL CLIP STANDBY”

appears and the camcorder enters the E-Mail Clip

Record-Standby mode.

Press the Recording Start/Stop Button to start E-

Mail Clip Recording.

Press the Recording Start/Stop Button to stop E-

Mail Clip Recording. “COMPLETED” is displayed,

then the camcorder re-enters the E-Mail Clip Record-

Standby mode.

Press E-MAIL to end E-Mail Clip Recording. The

● You can also view video clips on your PC by using

Windows^®Media Player. Refer to the instructions of the

PC and software.

normal screen reappears.

To cancel E-Mail Clip Recording . . .

..... after step 3, press E-MAIL again or press 5 to

stop tape playback.

To view video clips stored on a memory card . . .

..... ੬ pg. 28, 29.

Download from Www.Somanuals.com. All Manuals Search And Download.

34EN

ADVANCED FEATURES (cont.)

MENU/BRIGHT Wheel

Setting Print Information (DPOF Setting)

This camcorder is compatible with the DPOF (Digital

Print Order Format) standard in order to support

future systems such as automatic printing, which

records information about the still images you wish to

print (such as the number of prints to make). There

are 2 print information settings available: “To print all

still images (one print for each)” explained below and

“To print by selecting still images and no. of prints”

(੬ pg. 35).

TO PRINT ALL STILL IMAGES

(ONE PRINT FOR EACH)

Power Switch

Lock Button

Set the VIDEO/MEMORY switch to “MEMORY”,

then set the Power Switch to “PLAY”, while pressing

down the Lock Button located on the switch.

• A stored file is displayed.

VIDEO/MEMORY Switch

(Open the LCD monitor

to access this switch.)

Make sure an IMAGE file is displayed

(੬ pg. 28); if not, press SELECT to access the

MEMORY SELECT Screen. Rotate the MENU/

BRIGHT wheel to select “IMAGE” and press it.

Press the MENU/BRIGHT wheel in. The Menu

Screen appears.

Rotate the MENU/BRIGHT wheel to select

“DPOF” and press it. The Sub Menu appears.

Rotate the MENU/BRIGHT wheel to select “ALL

1” and press it. Selection is complete. The DPOF

Screen appears.

SELECT Button

Menu Screen

Display

Rotate the MENU/BRIGHT wheel to select

“EXECUTE” and press it. The normal playback

screen appears.

• To cancel selection, rotate the MENU/BRIGHT

wheel to select “RETURN” and press it.

DPOF

CURRENT

ALL

RESET

RETURN

To Reset The Setting . . .

..... select “RESET” in step 5. The setting is reset to 0

for all still images.

DPOF Screen

DPOF

ALL1?

EXECUTE

RETURN

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 35

Fast-Forward (

3) Button

TO PRINT BY SELECTING STILL IMAGES AND

NO. OF PRINTS

MENU/

BRIGHT Wheel

Rewind Button (

2 ^{Perform steps 1 through 4 on pg. 34.}

Rotate the MENU/BRIGHT wheel to select

“CURRENT” and press it. Selection is complete. The

DPOF Screen appears.

Press

print appears.

so that the image you wish to

Rotate the MENU/BRIGHT wheel to move the

highlight bar to the SHEETS number indication and

press it.

SELECT Button

Select the number of prints by rotating the MENU/

BRIGHT wheel and press it.

Repeat steps 3 through 5 for the desired number of

prints.

VIDEO/MEMORY Switch (Open the

LCD monitor to access this switch.)

• The number of prints can be set up to 15.

• To correct the number of prints, select the image

again and change the number.

Display

Rotate the MENU/BRIGHT wheel to select

“RETURN” and press it. Selection is complete.

“SAVE?” appears.

DPOF Screen

DPOF

• If you did not change any settings in step 3 through

5, the Menu Screen reappears.

SHEETS

Rotate the MENU/BRIGHT wheel to select

“EXECUTE”, then press it to save the setting you

have just made.

0 0

RETURN

• To cancel selection, rotate the MENU/BRIGHT

wheel to select “CANCEL” and press it.

DPOF

To Reset The No. Of Prints . . .

..... select “RESET” in step 5 on pg. 34. The number

of prints is reset to 0 for all still images.

SHEETS

0 5

CAUTION

While performing the above, never disconnect power, as

this may cause the memory to be corrupted. For safety,

all buttons including the Power Switch are disabled in

step 6.

DPOF

NOTES:

● “BATTERY LOW” appears if the battery remaining

power is too low.

SAVE?

● If you load a memory card already set as shown above

in a printer compatible with DPOF, it will make prints of

the selected still images automatically.

● To print images recorded on a tape, first dub them to a

memory card (੬ pg. 32).

EXECUTE

CANCEL

Download from Www.Somanuals.com. All Manuals Search And Download.

36EN

ADVANCED FEATURES (cont.)

Making A New Folder

New still pictures you are going to take can be

separated from previously shot pictures by resetting

the file name to DVC00001; these new pictures will

be stored in a new folder.

Folder and File names

Each time shooting takes place, a file name is

made using a number which is larger by one than

the largest number of the file names which are in

use. Even if you delete an image file with a

number in the middle of range, the number will

not be used for a new shot; a gap will remain in

the numerical sequence. If the file name reaches

DVC09999, a new folder (such as “101JVCGR”)

will be made and the file name will start again

from DVC00001.

Set the VIDEO/MEMORY Switch to “MEMORY”,

then set the Power Switch to “PLAY” while pressing

down the Lock Button located on the switch.

• A stored file is displayed.

Make sure an IMAGE file is displayed

(੬ pg. 28); if not, press SELECT to access the

MEMORY SELECT Screen. Rotate the MENU/

BRIGHT wheel to select “IMAGE” and press it.

MENU/BRIGHT Wheel

Press the MENU/BRIGHT wheel in. The Menu

Screen appears. Rotate the MENU/BRIGHT wheel to

select “NO. RESET”, then press it. The NO. RESET

Screen appears.

VIDEO/MEMORY Switch (Open the

LCD monitor to access this switch.)

Rotate the MENU/BRIGHT wheel to select

“EXECUTE”, then press it. The new folder (such as

“101JVCGR”) will be made and the file name of the

next shot starts from DVC00001.

Initialising A Memory Card

You can initialise a memory card anytime.

After initialising, all files and data stored on the

memory card, including those which have been

protected, are cleared.

SELECT Button

Perform step 1 of “Making A New Folder” above.

Press the MENU/BRIGHT wheel in. The Menu

Screen appears. Rotate the MENU/BRIGHT wheel to

select “FORMAT” and press it. The FORMAT Screen

appears.

MANUAL

AUTO

Lock Button

OFF

PLAY

Power Switch

Rotate the MENU/BRIGHT wheel to select

Display

“EXECUTE” and press it. The memory card is

initialised. When initialisation is finished, “NO

IMAGES STORED” or “NO E-MAIL CLIP STORED”

appears.

FORMAT

Menu Screen

ERASE ALL

EX I ST I NG DATA?

• To cancel initialisation, rotate the MENU/BRIGHT

wheel to select “RETURN” and press it.

EXECUTE

RETURN

CAUTION

Do not perform any other operation (such as turning

off the camcorder) during initialisation. Also, be sure

to use the provided AC Adapter, as the memory card

may be corrupted if the battery becomes exhausted

during initialisation. If the memory card becomes

corrupted initialise it.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 37

ADVANCED FEATURES

CONTENTS

FOR RECORDING ........................................... 38 – 45

Night-Scope............................................................ 38

Programme AE With Special Effects ..........................38 – 39

Fade/Wipe Effects .............................................40 – 41

Snapshot (For Tape Recording)....................................... 42

Auto Focus/Manual Focus ............................................ 43

Exposure Control ...................................................... 44

Iris Lock ................................................................ 44

White Balance Adjustment ........................................... 45

Manual White Balance Operation.................................... 45

USING MENUS FOR DETAILED ADJUSTMENT............. 46 – 51

For Recording Menu............................................46 – 49

For Playback Menu ............................................50 – 51

DUBBING .................................................... 52 – 53

Dubbing To Or From A VCR ........................................... 52

Dubbing To Or From A Video Unit Equipped With A DV Connector .... 53

USING THE REMOTE CONTROL UNIT ..................... 54 – 64

Installing The Batteries ............................................... 54

Slow-Motion Playback ............................................... 56

Frame-By-Frame Playback ........................................... 56

Playback Special Effects .............................................. 56

Playback Zoom ........................................................ 57

Random Assemble Editing .....................................58 – 62

For More Accurate Editing ............................................ 62

Audio Dubbing ......................................................... 63

Insert Editing .......................................................... 64

SYSTEM CONNECTIONS .................................... 65 – 66

Connection To A Personal Computer ................................. 65

Using The Camcorder As A WebCam

(GR-DVL1020 only) ....................................................... 66

Download from Www.Somanuals.com. All Manuals Search And Download.

38EN

FOR RECORDING

NOTES:

Night-Scope

● During Night-Scope, the following functions or settings

cannot be activated and its indicator blinks or goes out:

• Some modes of “Programme AE With Special Effects”

(੬ pg. 38, 39).

• “GAIN UP” in the CAMERA Menu (੬ pg. 47).

• “DIS” in the MANUAL Menu (੬ pg.47).

• “Video light” when LIGHT OFF/AUTO/ON is set to

“AUTO” (੬ pg. 19).

Makes dark subjects or areas even brighter than they

would be under good natural lighting. Although the

recorded image is not grainy, it may look as if it is

strobing due to the slow shutter speed.

MANUAL

” while pressing

Set the Power Switch to “

down the Lock Button located on the switch.

● During Night-Scope, it may be difficult to bring the

camcorder into focus. To prevent this, use of manual

focus and/or a tripod is recommended.

Press NIGHT so that the Night-Scope indicator

”appears.

• The shutter speed is automatically adjusted to

“

provide up to 30 times sensitivity.

• “A” appears beside “

” while the shutter speed is

being automatically adjusted.

To Deactivate Night-Scope . . .

..... press NIGHT again so that the Night-Scope

indicator disappears.

MENU/BRIGHT Wheel

Programme AE With Special Effects

MANUAL

” while pressing

down the Lock Button located on the switch.

Lock Button

Set the Power Switch to “

Press the MENU/BRIGHT wheel in. The Menu

Screen appears.

Power Switch

NIGHT Button

Rotate the MENU/BRIGHT wheel to select “

PROGRAMME AE”, then press it.

Rotate the MENU/BRIGHT wheel to select the

desired mode (੬ pg. 39), then press it. Selection is

complete. Press the MENU/BRIGHT wheel in again.

The Menu Screen closes.

• The PROGRAMME AE Menu disappears and the

selected mode is activated. The selected mode

indicator appears.

To Deactivate The Selected Mode . . .

..... select “OFF” in step 4.

NOTES:

● Programme AE with special effects can be changed

during recording or during Record-Standby.

● Some modes of Programme AE special effects cannot

be used during Night-Scope.

Display

ᮡ

SNO

SPOTL I GHT

I L I GHT

SEP I A

MONOTONE

CLASS I C F I LM

STROBE

IMPORTANT

Some modes of Programme AE with special effects

cannot be used with certain Fade/Wipe Effects

(੬ pg. 40, 41). If an unusable mode is selected, its

indicator blinks or goes out.

SLOW

ᮢ

GR-DVL1020/DVL820/DVL522 only

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 39

SEPIA

SHUTTER

Recorded scenes have a brownish tint like old

photos. Combine this with the Cinema mode for a

classic look.

1/50–The shutter speed is fixed at 1/50th of a

second. Black bands that usually appear when

shooting a TV screen become narrower.

1/120–The shutter speed is fixed at 1/120th of a

second. The flickering that occurs when shooting

under a fluorescent light or mercury-vapour lamp is

reduced.

MONOTONE

Like black and white films, your footage is shot in

B/W. Used together with the Cinema mode, it

enhances the “classic film” effect.

SPORTS

(Variable

Shutter Speed:

1/250 – 1/4000)

CLASSIC FILM*

Gives recorded scenes a strobe effect.

This setting allows fast-moving images to be

captured one frame at a time, for vivid, stable slow-

motion playback. The faster the shutter speed, the

darker the picture becomes. Use the shutter

function under good lighting conditions.

SNOW

Compensates for subjects that may otherwise

appear too dark when shooting in extremely bright

surroundings such as in the snow.

STROBE*

Your recording looks like a series of consecutive

snapshots.

SPOTLIGHT

Compensates for subjects that may otherwise

appear too bright when shooting under extremely

strong direct lighting such as spotlights.

SLOW (Slow Shutter) (GR-DVL522/DVL322 only)

Lights dark subjects or areas even brighter than

they would be under good natural lighting. Use

“SLOW” only in dark areas.

NOTE:

SLOW 4X

“SPOTLIGHT” has the same effect as –3 with the

exposure control (੬ pg. 44).

Slow Shutter raises light sensitivity to allow

shooting in dark environments.

SLOW 10X

Slow Shutter raises light sensitivity further to allow

shooting in even darker environments.

NOTES:

● When using “SLOW”, the image takes on a strobe-

like effect.

● When using “SLOW”, it may be difficult to bring the

camcorder into focus. To prevent this, use of manual

focus and/or a tripod is recommended.

TWILIGHT

Makes evening scenes look more natural.

White Balance (੬ pg. 45) is initially set to

can be changed to your desired setting. When

, but

Twilight is chosen, the camcorder automatically

adjusts the focus from approx. 10 m to infinity.

From less than 10 m, adjust the focus manually.

* For GR-DVL1020/DVL820 Owners:

Available when the VIDEO/MEMORY Switch is set to

“VIDEO”.

Download from Www.Somanuals.com. All Manuals Search And Download.

40EN

FOR RECORDING (cont.)

Fade/Wipe Effects

These effects let you make pro-style scene transi-

tions. Use them to spice up the transition from one

scene to the next.

IMPORTANT

Some Fade/Wipe Effects cannot be used with certain

modes of Programme AE with special effects

(੬ pg. 38, 39). If an unusable Fade/Wipe Effect is

selected, its indicator blinks or goes out.

Fade or Wipe works when tape recording is started

or when you stop recording.

Set the VIDEO/MEMORY Switch to “VIDEO”

Lock Button

(GR-DVL1020/DVL820/DVL522 only), then set the

MANUAL

Power Switch to “

” while pressing down the

MENU/BRIGHT Wheel

Lock Button located on the switch.

Press the MENU/BRIGHT wheel in. The Menu

Screen appears.

Rotate the MENU/BRIGHT wheel to select “

WIPE/FADER”, then press it.

Rotate the MENU/BRIGHT wheel to select the

desired function, then press it. Selection is complete.

Press the MENU/BRIGHT wheel in again.

• The WIPE/FADER Menu disappears and the effect

is reserved. The indicator representing the selected

effect appears.

Power Switch

Press the Recording Start/Stop Button to activate

the Fade-in/out or Wipe-in/out.

Recording Start/Stop Button

To Deactivate The Selected Effect . . .

..... select “OFF” in step 4.

VIDEO/MEMORY Switch

(GR-DVL1020/DVL820/DVL522

only; open the LCD monitor to

access this switch.)

NOTE:

You can extend the length of a Fade or Wipe by pressing

and holding the Recording Start/Stop Button.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 41

Fader And Wipe Menu

Effect

Fade in or out with a white screen.

FADER — WHITE

Fade in or out with a black screen.

FADER — BLACK

FADER — B.W

Fade in to a colour screen from a black and white screen, or fade out

from colour to black and white.

Wipe in on a black screen from the upper right to the lower left corner,

or wipe out from lower left to upper right, leaving a black screen.

WIPE — CORNER

WIPE — WINDOW

WIPE — SLIDE

The scene starts in the centre of a black screen and wipes in toward

the corners, or comes in from the corners, gradually wiping out to the

centre.

Wipe in from right to left, or wipe out from left to right.

Wipe in as the two halves of a black screen open to the left and right,

revealing the scene, or wipe out and the black screen reappears from

left and right to cover the scene.

WIPE — DOOR

The scene wipes in from the bottom to the top of a black screen, or

wipes out from top to bottom, leaving a black screen.

WIPE — SCROLL

WIPE — SHUTTER

Wipe in from the centre of a black screen toward the top and bottom,

or wipe out from the top and bottom toward the centre leaving a black

screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

42EN

FOR RECORDING (cont.)

SNAPSHOT Button

Snapshot (For Tape Recording)

This feature lets you record still images that look like

photographs onto a tape.

Power Switch

SNAPSHOT MODE SELECTION

Set the VIDEO/MEMORY Switch to “VIDEO” (GR-

DVL1020/DVL820/DVL522 only), then set the Power

MANUAL

Switch to “

” while pressing down the Lock

Button located on the switch.

Press the MENU/BRIGHT wheel in. The Menu

Lock Button

Screen appears.

Rotate the MENU/BRIGHT wheel to select “

CAMERA”. Press it and the CAMERAMenu appears.

Rotate the MENU/BRIGHT wheel to select

VIDEO/MEMORY Switch

(GR-DVL1020/DVL820/

DVL522 only; open the

LCD monitor to access

this switch.)

“SNAP MODE”, then press it.

Rotate the MENU/BRIGHT wheel to select the

desired Snapshot mode, then press it.

Rotate the MENU/BRIGHT wheel to select

“

RETURN” and press it twice. The Menu Screen

closes.

SNAPSHOT RECORDING

Display

Press SNAPSHOT. “PHOTO” appears while the

snapshot is being taken.

Menu Screen

If you press during Record-Standby . . .

...... “PHOTO” appears and a still image will be recorded for

approx. 6 seconds, then the camcorder re-enters the

Record-Standby mode.

SNAP MODE

–

FULL

P I N–UP

FRAME

If you press during Recording . . .

...... “PHOTO” appears and a still image will be recorded for

approx. 6 seconds, then the normal recording resumes.

AUTO

GR-DVL1020/DVL820/

DVL522 only

• Regardless of the Power Switch position (“

” or

MANUAL

“

”), Snapshot recording takes place using the

selected Snapshot mode.

FULL

Snapshot mode

with no frame

Motor Drive Mode

Keeping SNAPSHOT pressed provides an effect similar to

serial photography. (Interval between still images: approx.

1 second)

NOTES:

● To remove the shutter sound, ੬ “BEEP” on pg. 46, 48.

● If Snapshot recording is not possible, “PHOTO” blinks when

SNAPSHOT is pressed.

● If Programme AE with special effects (੬ pg. 38) is

engaged, certain modes of Programme AE with special

effects are disabled during Snapshot recording. In such a

case, the icon blinks.

PIN-UP

Pin-Up mode

● If SNAPSHOT is pressed when “DIS” is set to “ON”

(੬ pg. 47), the Stabiliser will be disabled.

● The Motor Drive mode is disabled when “REC SELECT” is

set to “

” in the Menu Screen (੬ pg. 49).

● If “REC SELECT” is set to “

” in the DSC

Menu Screen, still images are recorded on the memory card

as well (640 X 480 pixels).

● During tape playback as well, all snapshot modes are

FRAME

Snapshot mode

with frame

available when “

COPY” is set to “OFF” in the

Menu Screen (੬ pg. 50). However, the shutter sound is

not heard.

● During Snapshot recording, the image displayed in the

viewfinder may be partially missing. However, there is no

effect in the recorded image.

● When a cable is connected to the AV connector, the shutter

sound is not heard from the speaker, however it is recorded

onto the tape.

There is the sound effect of a shutter closing.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 43

Focus detection zone

While focusing on a further

subject

While focusing on a nearer

subject

FEATURE: Auto Focus

PURPOSE:

The camcorder’s Full Range AF system offers continuous shooting ability from close-up (as close as approx.

5 cm to the subject) to infinity.

However, correct focus may not be obtainable in the situations listed below (in these cases use manual

focusing):

• When two subjects overlap in the same scene.

• When illumination is low.*

• When the subject has no contrast (difference in brightness and darkness), such as a flat, one-colour wall, or

a clear, blue sky.*

• When a dark object is barely visible in the viewfinder.*

• When the scene contains minute patterns or identical patterns that are regularly repeated.

• When the scene is affected by sunbeams or light reflecting off the surface of a body of water.

• When shooting a scene with a high-contrast background.

* The following low-contrast warnings appear blinking:

and

NOTES:

● If the lens is smeared or blurred, accurate focusing is not possible. Keep the lens clean, wiping with a piece of soft

cloth if it gets dirty. When condensation occurs, wipe with a soft cloth or wait for it to dry naturally.

● When shooting a subject close to the lens, zoom out first (੬ pg. 18). If zoomed-in in the auto focus mode, the

camcorder may automatically zoom out depending on the distance between the camcorder and the subject. This

will not occur when “TELE MACRO” (੬ pg. 48) is activated.

FEATURE: Manual Focus

PURPOSE:

To obtain correct focus.

OPERATION:

1) If you are using the viewfinder, you should already have made the necessary viewfinder adjustments

(੬ pg. 10).

2) Set the Power Switch to “

MANUAL

” while pressing down the Lock Button located on the switch, then press

FOCUS (੬ pgs. 80 and 81, # FOCUS Button). The manual focus indicator appears.

3) To focus on a farther subject, rotate the MENU/BRIGHT wheel towards “+”. “ ” appears and blinks.

To focus on a nearer subject, rotate the MENU/BRIGHT wheel towards “–”. “ ” appears and blinks.

4) Press the MENU/BRIGHT wheel in. Focus adjustment is complete.

AUTO

To reset to Auto Focus, press FOCUS twice or set the Power Switch to “

”.

If FOCUS is pressed once, the camcorder will enter the focus adjustment mode again.

NOTES:

● Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you focus in

on a subject in the wide-angle position, sharply focused images cannot be obtained when zoomed up because the

depth-of-field is reduced at longer focal lengths.

● When the focus level cannot be adjusted any further or closer, “ ” or “ ” will blink.

Download from Www.Somanuals.com. All Manuals Search And Download.

44EN

FOR RECORDING (cont.)

Exposure Control

Iris Lock

Manual exposure adjustment is recommended in the

following situations:

Use this function in the following situations:

• When shooting a moving subject.

• When shooting using reverse lighting or when the

background is too bright.

• When shooting on a reflective natural background

such as at the beach or when skiing.

• When the background is overly dark or the subject

light.

• When the distance to the subject changes (so its

size in the LCD monitor or the viewfinder changes),

such as when the subject is backing away.

• When shooting on a reflective natural background

such as at the beach or when skiing.

• When shooting objects under a spotlight.

• When zooming.

When the subject is close, keep the iris locked. Even

when the subject moves away from you, the image

will not darken or brighten.

MANUAL

” while pressing

down the Lock Button located on the switch.

Set the Power Switch to “

Press the MENU/BRIGHT wheel in. The Menu

Screen appears.

Before the following steps, perform steps 1

through 4 of “Exposure Control”.

Rotate the MENU/BRIGHT wheel to select “

EXPOSURE”, then press it.

Adjust zoom so that the subject fills the LCD

monitor or the viewfinder, then press and hold the

MENU/BRIGHT wheel for over 2 seconds. The

exposure control indicator and “ ” appear.

Rotate the MENU/BRIGHT wheel to select

“MANUAL”, then press it. The Menu Screen disap-

pears. The exposure control indicator appears.

Press the MENU/BRIGHT wheel in. “ ” changes to

“

” and the iris is locked.

Rotate the MENU/BRIGHT wheel towards “+” to

brighten the image, or towards “–” to darken the

image. (maximum ±6)

Iris lock indicator

Press the MENU/BRIGHT wheel in. Exposure

adjustment is complete.

MENU/BRIGHT

Wheel

To Return To Automatic Exposure Control . . .

..... select “AUTO” in step 4. Or, set the Power Switch

AUTO

to “

”.

BACKLIGHT Button (5)

To Brighten The Subject Quickly . . .

..... press BACKLIGHT.

is displayed and the

subject is brightened. If pressed again,

disappears and the brightness returns to the

previous level.

• +3 exposure has the same effect as the

BACKLIGHT Button.

• Using BACKLIGHT may cause the light around the

subject to become too bright and the subject to

become white.

Power Switch

• Backlight compensations is also available when the

AUTO

Power Switch is set to “

”.

To Return To Automatic Iris Control . . .

..... rotate MENU/BRIGHT to display “AUTO” then

press it in step 4. The exposure control indicator

and “ ” disappear. Or, set the Power switch to

AUTO

NOTE:

You cannot use the manual exposure control at the same

time with backlight, spotlight (੬ pg. 39) compensation

and “SNOW” (੬ pg. 39).

“

”.

To Lock The Exposure Control And The Iris . . .

..... after step 4 of “Exposure Control”, adjust the

exposure rotating the MENU/BRIGHT wheel.

Then lock the iris in step 5 of “Iris Lock”. For

automatic locking, rotate the MENU/BRIGHT

wheel to select “AUTO”, then press it in step 4.

The iris becomes automatic after about 2

seconds.

Iris

Like the pupil of the human eye, it contracts in well-lit

environments to keep too much light from entering,

and dilates in dim environments to allow in more light.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 45

White Balance Adjustment

Manual White Balance Operation

A term that refers to the correctness of colour

reproduction under various lighting. If the white

balance is correct, all other colours will be accurately

reproduced.

Perform Manual White Balance when shooting under

various types of lighting.

Follow steps 1 through 4 of the white balance

adjustment, and select “ MWB”.

The white balance is usually adjusted automatically.

However, more advanced camcorder operators

control this function manually to achieve a more

professional colour/tint reproduction.

Hold a sheet of plain white paper in front of the

subject. Adjust zoom or position yourself so that the

white paper fills the screen.

MANUAL

” while pressing

down the Lock Button located on the switch.

Set the Power Switch to “

Press the MENU/BRIGHT wheel in until

begins blinking rapidly.

When the setting is completed,

blinking.

resumes normal

Press the MENU/BRIGHT wheel in. The Menu

Screen appears.

4 Press the MENU/BRIGHT wheel in twice. The

Menu Screen closes and the Manual White Balance

indicator is displayed.

Rotate the MENU/BRIGHT wheel to select

W.BALANCE”, then press it. The W.BALANCE

Menu appears.

“

Rotate the MENU/BRIGHT wheel to select the

desired mode.

“AUTO” ................. White balance is adjusted

automatically (factory preset).

MENU/BRIGHT Wheel

“

MWB” ............ White balance is set manually.

FINE” ............. Outdoors on a sunny day.

CLOUD” ........ Outdoors on a cloudy day.

HALOGEN” ... A video light or similar type of

lighting is used.

White paper

Press the MENU/BRIGHT wheel in. Selection is

complete. Press the MENU/BRIGHT wheel in again.

The Menu Screen closes and the selected mode

indicator except “AUTO” appears.

Power Switch

To Return To Automatic White Balance . . .

..... select “AUTO” in step 4. Or, set the Power Switch

AUTO

to “

”.

NOTE:

White balance cannot be used when Sepia or Monotone

NOTES:

(੬ pg. 39) is activated.

● In step 2, it may be difficult to focus on the white paper.

In such a case, adjust focus manually (੬ pg. 43).

● A subject can be shot under various types of lighting

conditions indoors (natural, flourescent, candlelight,

etc.). Because the colour temperature is different

depending on the light source, the subject tint will differ

depending on the white balance settings. Use this

function for a more natural result.

● Once you adjust white balance manually, the setting is

retained even if the power is turned off or the battery

removed.

Download from Www.Somanuals.com. All Manuals Search And Download.

46EN

USING MENUS FOR DETAILED ADJUSTMENT

MENU/BRIGHT Wheel

For Recording Menu

This camcorder is equipped with an easy-to-use,

on-screen menu system that simplifies many of the

more detailed camcorder settings (੬ pg. 47 – 49).

Lock Button

MANUAL

” while pressing

down the Lock Button located on the switch.

Set the Power Switch to “

Power Switch

Press the MENU/BRIGHT wheel in. The Menu

Screen appears.

Rotate the MENU/BRIGHT wheel to select the

desired function menu, and press it. The selected

function menu appears.

Display

W I P E / FADER

PROGRAM AE

EXPOSURE

W. BALANCE

CAMERA

Menu Screen

Function menu setting depends on the function.

If you have selected “

WIPE/FADER”,

EXPOSURE” or

MANUAL

REC MODE

SOUND MODE

ZOOM

SNAP MODE

GA I N UP

–

SYSTEM

“

PROGRAM AE”, “

W. BALANCE” . . .

12B I T

D I SPLAY

DSC

FULL

AGC

END

..... see pg. 47.

If you have selected “

MANUAL”, “

CAMERA”, “

RETURN

SYSTEM”, “

DISPLAY” or

“

DSC” (GR-DVL1020/DVL820/DVL522 only) . . .

..... go to step 5.

Sub Menu

Rotate the MENU/BRIGHT wheel to select the

D I S

–

OFF

desired function and press it. The Sub Menu appears.

Then, rotate the MENU/BRIGHT wheel to select the

parameter, and press it. Selection is complete.

Rotate the MENU/BRIGHT wheel to select

“

RETURN” and press it twice. The Menu Screen

closes.

• The

icon represents “END”.

BEEP

–

MELODY

TALLY

NOTE:

I D NUMBER

DEMO MODE

S I DE LED

CAM RESET

0 6

When the Menu Screen is left on for a couple of

minutes, a residual image may be left on the screen

and it may take several seconds for the residual

image to disappear. This is not due to any defect of

the unit.

RETURN

ON SCREEN

DATE / T I ME

T I ME CODE

CLOCK

–

LCD / TV

AUTO

OFF

2 5 . 12 . 02

17 : 3 0

ADJ .

RETURN

QUAL I TY

I MAGE S I ZE

REC SELECT

–

F I NE

1024X768

W I P E / FADER

PROGRAM AE

EXPOSURE

W. BALANCE

CAMERA

RETURN

MANUAL

SYSTEM

D I SPLAY

DSC

END

Normal Screen

* Actual menus differ by model and may appear

differently from these illustrations. Some menu items

may be unavailable on your model.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 47

Menu Screen Explanations

WIPE/FADER

PROGRAM AE

EXPOSURE

Refer to “Fade/Wipe Effects” (੬ pg. 40, 41).

Refer to “Programme AE With Special Effects” (੬ pg. 38, 39).

Refer to “Exposure Control” and “Iris Lock” (੬ pg. 44).

W.BALANCE

Refer to “White Balance Adjustment” and “Manual White Balance Operation”

(੬ pg. 45).

REC MODE

Allows you to set the tape recording mode (SP or LP) depending on your

preference (੬ pg. 13).

SOUND

MODE

12BIT

Enables tape recording of stereo sound on four separate channels, and is

recommended for use when performing audio dubbing. (Equivalent to the

32 kHz mode of previous models)

16BIT

10X

Enables tape recording of stereo sound on two separate channels. (Equivalent

to the 48 kHz mode of previous models)

ZOOM

When set to “10X” while using digital zoom, the zoom magnification will reset to

10X since digital zoom will be disengaged.

40X

Allows you to use the Digital Zoom. By digitally processing and magnifying

images, zooming is possible from 10X (the optical zoom limit), to a maximum

of 40X digital magnification.

700X

Allows you to use the Digital Zoom. By digitally processing and magnifying

images, zooming is possible from 10X (the optical zoom limit), to a maximum

of 700X digital magnification.

SNAP MODE

GAIN UP OFF

AGC

Refer to “Snapshot (For Tape Recording)” (੬ pg. 42).

Allows you to shoot dark scenes with no picture brightness adjustment.

The overall appearance may be grainy, but the image is bright.

AUTO

The shutter speed is automatically adjusted (1/25 — 1/200 sec.). Shooting a

subject in low or poor lighting at 1/25 sec. shutter speed provides a brighter

image than in the AGC mode, but the subject’s movements are not smooth or

natural. The overall appearance may be grainy. While the shutter speed is

being automatically adjusted, “

” is displayed.

DIS

OFF

To compensate for unstable images caused by camera-shake, particularly at

high magnification.

NOTES:

● Accurate stabilisation may not be possible if hand shake is excessive, or

under the following conditions:

• When shooting subjects with vertical or horizontal stripes.

• When shooting dark or dim subjects.

• When shooting subjects with excessive backlighting.

• When shooting scenes with movement in various directions.

• When shooting scenes with low-contrast backgrounds.

● Switch off this mode when recording with the camcorder on a tripod.

● The “

” indicator blinks or goes out if the Stabiliser cannot be used.

: Factory-preset

NOTES:

MANUAL

”.

AUTO

● Settings made in the “

CAMERA” Menu remain effective whether the Power Switch is set to “

” or “

MANUAL

However, the menu settings can be changed only when the Power Switch is set to “

● The “

”.

MANUAL

”.

MANUAL” settings are effective only when the Power Switch is set to “

CONTINUED ON NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

48EN

USING MENUS FOR DETAILED ADJUSTMENT (cont.)

Menu Screen Explanations (cont.)

TELE

MACRO

OFF

Usually the distance to a subject where the lens is in focus depends on the

zoom magnification. Unless there is a distance more than 1m to the subject,

the lens is out of focus at the maximum telephoto setting. When set to “ON”,

you can shoot a subject as large as possible at a distance of approx. 60 cm.

• Depending on the zoom position, the lens may go out of focus.

WIDE

MODE

OFF

Records with no change in the screen ratio. For playback on a TV with a

normal screen ratio.

CINEMA

Inserts black bands at the top and bottom of the screen. During playback on

wide-screen TVs, the black bands at the top and bottom of the screen are cut

and the screen ratio becomes 16:9.

appears. When using this mode, refer

to your wide-screen TV’s instruction manual. During playback/recording on 4:3

TVs/LCD monitor/viewfinder, black bands are inserted at the top and bottom of

the screen and the image appears like a letterboxed 16:9 movie.

• The “CINEMA” mode is effective only when the VIDEO/MEMORY Switch is

set to “VIDEO” (GR-DVL1020/DVL820/DVL522 only).

SQUEEZE For playback on TVs with an aspect ratio of 16:9. Naturally expands the image

to fit the screen without distortion. appears. When using this mode, refer to

your wide-screen TV’s instruction manual. During playback/recording on 4:3

TVs/LCD monitor/viewfinder, the image is elongated vertically.

• The “SQUEEZE” mode is effective only when the VIDEO/MEMORY Switch is

set to “VIDEO” (GR-DVL1020/DVL820/DVL522 only).

S.WIDE

“

” appears. The zoom range is extended beyond the maximum optical

zoom wide angle range. This mode’s wide angle setting is equivalent to using

a 0.9X wide conversion lens. Zooming is possible from 0.9X to 10X. This mode

is suitable for shooting in a small room.

(GR-DVL1020/

DVL820 only)

• “S.WIDE” mode is effective only when the VIDEO/MEMORY Switch is set to

“VIDEO”.

WIND

CUT

OFF

Disengages the function which cuts down on noise created by wind.

Helps cut down on noise created by wind. “

sound will change. This is normal.

” appears. The quality of the

BEEP

OFF

Even though not heard while shooting, shutter sound is recorded on the tape.

BEEP

The beep sounds when the power is turned on or off, and at the beginning and

end of recording. Also to activate the shutter sound effect (੬ pg. 26, 42).

MELODY

Instead of a beep, a melody sounds when any operation is performed. It also

activates the shutter sound effect (੬ pg. 26, 42).

TALLY

OFF

The tally lamp remains off at all times.

The tally lamp comes on to signal the start of recording.

ID NUMBER

This number is necessary when connecting the camcorder to a device such as

a computer using the J terminal (JLIP) or PC connector. The numbers range

from 01 to 99. Factory setting is 06.

(GR-DVL322 only)

: Factory-preset

NOTES:

MANUAL

”.

● The “

● “

MANUAL” settings are effective only when the Power Switch is set to “

SYSTEM” functions which are set when the Power Switch is set to “ _MANUAL” are also applied when the Power

Switch is set to “PLAY” (੬ pg. 50).

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 49

DEMO

MODE

OFF

Automatic demonstration will not take place.

Demonstrates certain functions such as Programme AE with special effects,

etc., and can be used to confirm how these functions operate.

Demonstration starts in the following cases:

• When the Menu Screen is closed after “DEMO MODE” is turned “ON”.

• With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes

AUTO

MANUAL

” .

after the Power Switch is set to “

” or “

Performing any operation during the demonstration stops the demonstration

temporarily. If no operation is performed for more than 3 minutes after that, the

demonstration will resume.

NOTES:

● If a tape is in the camcorder, the demonstration cannot be turned on.

● “DEMO MODE” remains “ON” even if the camcorder power is turned off.

● If “DEMO MODE” remains “ON”, some functions will not be available. After

viewing demo, set to “OFF”.

SIDE LED ON

The Side LED indicator (੬ p. 80, 81) lights on the camcorder when the Power

(GR-DVL1020/

AUTO

MANU

”.

Switch is set to “

” or “

DVL820 only)

OFF

Does not reset all settings to the factory-preset.

Resets all settings to the factory-preset.

CAM

CANCEL

RESET

EXECUTE

LCD

Keeps the camcorder’s display (except the date, time and time code) from

appearing on the connected TV screen.

SCREEN

Makes the camcorder’s display appear on screen when the camcorder is

connected to a TV.

LCD/TV

The date/time does not appear.

DATE/

TIME

OFF

Displays the date/time for approx. 5 seconds in the following cases:

• When the Power Switch is set from “OFF” to “

AUTO

MANUAL

”.

AUTO

” or “

• When tape playback starts. The camcorder displays the date/time when

scenes are recorded.

• When the date is changed during tape playback.

The date/time is always displayed.

Time code is not displayed.

TIME

CODE

OFF

Time code is displayed on the camcorder and on the connected TV. Frame

numbers are not displayed during recording.

Allows you to set the current date and time (੬ pg. 11).

CLOCK ADJ.

(GR-DVL1020/DVL820/DVL522 only)

QUALITY

Refer to “Picture Quality/Image Size Setting” (੬ pg. 14).

IMAGE SIZE

REC

SELECT

When Snapshot recording is performed with the VIDEO/MEMORY Switch set

to “VIDEO”, still images are recorded only onto the tape.

When Snapshot recording is performed with the VIDEO/MEMORY Switch set

to “VIDEO”, still images are recorded not only onto the tape but also on the

memory card (640 x 480 pixels). In this mode, the “SNAP MODE” selection in

the CAMERA Menu is also applicable to memory card recording.

: Factory-preset

NOTES:

MANUAL

” are also applied

●

“

SYSTEM” and “

DISPLAY” functions which are set when the Power Switch is set to “

when the Power Switch is set to “PLAY” (

੬

pg. 50). “CLOCK ADJ.” only appears when the Power Switch is set to

MANUAL

“

”.

AUTO

”. However,

● Settings made in the “

the menu settings can be changed only when the Power Switch is set to “

DISPLAY” Menu remain effective even when the Power Switch is set to “

MANUAL

”.

● The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control (provided)

(੬ pg. 23, 52, 59).

Download from Www.Somanuals.com. All Manuals Search And Download.

50EN

USING MENUS FOR DETAILED ADJUSTMENT (cont.)

For Playback Menu

VIDEO/MEMORY Switch

(GR-DVL1020/DVL820/DVL522 only; open

the LCD monitor to access this switch.)

The following procedure applies to all except Synchro

Comp (੬ pg. 62).

Power Switch

Set the VIDEO/MEMORY Switch to “VIDEO” (GR-

MENU/BRIGHT Wheel

DVL1020/DVL820/DVL522 only), then set the Power

Switch to “PLAY” while pressing down the Lock

Button located on the switch.

Press the MENU/BRIGHT wheel in. The Menu

Screen appears.

Rotate the MENU/BRIGHT wheel to select the

desired function menu, and press it. The selected

function menu appears.

Display

Rotate the MENU/BRIGHT wheel to select the

desired function, and press it to display the Sub Menu.

V I DEO

SYSTEM

D I SPLAY

SOUND MODE

12B I T MODE

SYNCHRO

Lock Button

Rotate the MENU/BRIGHT wheel to select the

REC MODE

COPY

desired parameter and press it. Selection is complete.

Recording

Start/Stop Button

S / AV I NPUT

Rotate the MENU/BRIGHT wheel to select “

RETURN” and press it twice to close the Menu Screen.

END

Menu Screen Explanations

SOUND MODE ੬ pg. 51.

SOUND MODE

–

STEREO

SOUND

O . O

12BIT MODE

SYNCHRO

REC MODE

੬ pg. 51.

੬ pg. 62.

12B I T MODE

SYNCHRO

REC MODE

COPY

S / AV I NPUT

OFF

Allows you to set the tape

recording mode (SP or LP)

depending on your preference

(੬ pg. 13). It is recommended

you use “REC MODE” in the

RETURN

“

VIDEO” Menu when using

this camcorder as a recorder

BEEP

–

MELODY

during dubbing (੬ pg. 53).

TALLY

I D NUMBER

DEMO MODE

S I DE LED

CAM RESET

COPY ON: Enables dubbing of images

(GR-DVL1020/ recorded on a tape to a memory

DVL820/DVL522 card (੬ pg. 32).

only)

OFF: Enables snapshots to be

taken during tape playback.

RETURN

S/AV INPUT

(GR-DVL1020/

DVL820 only)

ON: Enables audio/video signal

input from the AV and S-VIDEO

connectors (੬ pg. 52).

ON SCREEN

DATE / T I ME

T I ME CODE

–

LCD / TV

AUTO

OFF

OFF: Enables audio/video signal

output to a TV, VCR, etc. via the

AV and S-VIDEO connectors

(੬ pg. 22, 52).

RETURN

Each setting is linked with “

DISPLAY” or “ SYSTEM”, which

appears when the Power Switch is

set to “

The parameters are the same as in

the description on pg. 48, 49.

MANUAL

” (੬ pg. 48, 49).

* Actual menus differ by model and may appear

differently from these illustrations. Some menu items

may be unavailable on your model.

NOTES:

● The date indication can also be turned on/off by

pressing DISPLAY on the remote control (provided).

● “REC MODE” can be set when the Power Switch is set

MANUAL

to “PLAY” or “

” (੬ pg. 13, 47).

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 51

Playback Sound

During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the

sound back. Select the type of sound to accompany your playback picture. According to the menu access

explanation on pg. 50, select “SOUND MODE” or “12BIT MODE” from the Menu Screen and set it to the desired

parameter.

STEREO

SOUND MODE SOUND L

SOUND R

Sound is output on both “L” and “R” channels in stereo.

Sound from the “L” channel is output in stereo.

Sound from the “R” channel is output in stereo.

MIX

Original and dubbed sounds are combined and output in stereo on both

“L” and “R” channels in stereo.

12BIT MODE

SOUND 1

Original sound is output on both “L” and “R” channels in stereo.

Dubbed sound is output on both “L” and “R” channels in stereo.

SOUND 2

: Factory-preset

NOTES:

● The “SOUND MODE” setting is available for both 12-bit and 16-bit sound. (In previous models’ functions, “12-bit” is

called “32 kHz” and “16-bit” is called “48 kHz”.)

● The camcorder cannot detect the sound mode in which the recording was made during fast-forward or rewind. During

playback the sound mode is displayed in the upper left corner.

Display

ON SCREEN setting:

For playback sound, tape

speed and tape running.

DATE/TIME setting:

For date/time.

TIME CODE setting:

For time code.

12B I T / SOUND

2 5 . 12 . 02

17 : 3 0

12 : 34 : 24

Frames*

Seconds

Minutes

*25 frames = 1 second

Download from Www.Somanuals.com. All Manuals Search And Download.

52EN

DUBBING

Connector cover*

Dubbing To Or From A VCR

[To Use This Camcorder As A Player]

Power Switch

Following the illustration, connect the camcorder

and the VCR. Also refer to pg. 22 and 23.

To AV

Set the VIDEO/MEMORY Switch to “VIDEO” (GR-

DVL1020/DVL820/DVL522 only), then set the

camcorder’s Power Switch to “PLAY” while pressing

down the Lock Button located on the switch, turn on

the VCR’s power, and insert the appropriate

cassettes in the camcorder and the VCR.

Audio/Video

cable (provided)

S-VIDEO

4 ^{Engage the VCR’s AUX and Record-Pause modes.}

Engage the camcorder’s Play mode to find a spot

S-Video cable

(optional)

just before the edit-in point. Once it is reached, press

4/6 on the camcorder.

White to AUDIO

L IN or OUT

Press /6 on the camcorder and engage the

VCR’s Record mode.

Engage the VCR’s Record-Pause mode and

Yellow to

VIDEO** IN

or OUT

Red to

AUDIO R IN

or OUT

press /6 on the camcorder.

NOTES:

Repeat steps 4 through 6 for additional editing,

then stop the VCR and camcorder when finished.

VCR

● As the camcorder starts to play your footage it will

appear on your TV. This will confirm the connections

and the AUX channel for dubbing purposes.

● Before you start dubbing, make sure that the indications

do not appear on the connected TV. If they do, they are

being recorded onto the new tape.

To S-VIDEO IN

or OUT

When connecting the cables, open this cover.

** Connect when an S-Video cable is not used.

To choose whether or not the following displays

appear on the connected TV . . .

• Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in

the Menu Screen (੬ pg. 50).

Or, press DISPLAY on the remote control

(provided) to turn on/off the date indication.

• Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (੬ pg. 50).

• Playback Sound Mode, Tape Speed And Tape

Running Displays

..... set “ON SCREEN” to “LCD” or “LCD/TV” in the

Menu Screen (੬ pg. 50).

For GR-DVL1020/DVL820 owners:

[To Use This Camcorder As A Recorder ]

1. Set the VIDEO/MEMORY Switch to “VIDEO”,

then set the camcorder’s Power Switch to

“PLAY” while pressing down the Lock Button

located on the switch.

2. Set “S/AV INPUT” to “ON” and set “REC

MODE” to “SP” or “LP” (੬ pg. 50).

3. Connect the cables as shown in the illustration

and load a cassette to record on.

4. Press the Recording Start/Stop button to

AV. IN

engage the Record-Pause mode. “

appears on the screen.

”

5. Press the Recording Start/Stop button to start

recording. rotates.

6. Press the Recording Start/Stop button again to

engage the Record-Pause mode.

rotating.

stops

NOTES:

● After dubbing, set “S/AV INPUT” back to “OFF”.

● Analog signals can be converted to digital signals

with this procedure.

● It is also possible to dub from another camcorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 53

Dubbing To Or From A Video Unit Equipped

With A DV Connector (Digital Dubbing)

It is also possible to copy recorded scenes from this

camcorder onto another video unit equipped with a

DV connector. Since a digital signal is sent, there is

little if any image or sound deterioration.

VIDEO/MEMORY Switch

(GR-DVL1020/DVL820/DVL522 only)

[To use this camcorder as a player]

Make sure all units are turned off. Connect this

camcorder to a video unit equipped with a DV input

connector using a DV cable as shown in the

illustration.

To DV

Lock Button

Set this camcorder’s VIDEO/MEMORY Switch to

“VIDEO” (GR-DVL1020/DVL820/DVL522 only), then

the Power Switch to “PLAY” while pressing down the

Lock Button located on the switch, turn on the video

unit’s power, and insert the appropriate cassettes in

this camcorder and the video unit.

MANUAL

AUTO

Core filter

OFF

PLAY

DV cable

(optional)

Power Switch

to play back the source tape.

4 ^Press

While watching the playback on the monitor,

engage the DV connector-equipped video unit’s

record mode from the spot on the source tape you

want to begin recording.

Core filter

To DV

IN/OUT

NOTES:

● It is recommended to use the AC Adapter as the

power supply instead of the battery pack (੬ pg. 9).

● If the remote control is used when both the player and

recorder are JVC video units, both units will perform the

same operation. To prevent this from happening, press

the buttons on both units.

Video unit equipped

with DV connector

● If a blank portion or disturbed image is played back on

the player during dubbing, the dubbing may stop so that

an unusual image is not dubbed.

● Even though the DV cable is connected correctly,

sometimes the image may not appear in step 4. If this

occurs, turn off the power and make connections again.

● If “Playback Zoom” (੬ pg. 57), “Playback Special

Effects” (੬ pg. 56) or “Snapshot” is attempted during

playback, only the original playback image recorded on

the tape is output from the DV connector.

● When using a DV cable, be sure to use the optional

JVC VC-VDV204U DV cable.

[To Use This Camcorder As A Recorder]

1. Set this camcorder’s VIDEO/MEMORY Switch to “VIDEO” (GR-DVL1020/DVL820/DVL522 only), then the

Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

2. Set “REC MODE” to “SP” or “LP” in the Menu Screen (੬ pg. 50).

3. Connect the DV cable as shown in the illustration and load a cassette to record on.

4. Press the Recording Start/Stop button to engage the Record-Pause mode. “

” appears on the screen.

DV. IN

5. Press the Recording Start/Stop button to start recording.

6. Press the Recording Start/Stop button again to engage the Record-Pause mode.

rotates.

stops rotating.

NOTES:

● Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND

MODE” setting (੬ pg. 47).

● During Digital Dubbing, no signals are output from the video or audio connectors.

Download from Www.Somanuals.com. All Manuals Search And Download.

54EN

USING THE REMOTE CONTROL UNIT

The Full-Function Remote Control Unit can operate

this camcorder from a distance as well as the basic

operations (Playback, Stop, Pause, Fast-Forward and

Rewind) of your VCR. It also makes additional

playback functions possible.

Tab

Installing The Batteries

The remote control uses two “AAA (R03)” size

batteries. See “General Battery Precautions”

(੬ pg. 75).

1Remove the battery compartment cover while

–

pushing up the tab as illustrated.

Insert two ”AAA (R03)” size batteries in the

correct direction.

Re-attach the battery compartment cover.

Remote sensor

When using the remote control, be sure to point it at the remote

sensor. The transmitted beam’s approximate effective distance for

indoor use is 5m.

The transmitted beam may not be effective or may cause incorrect

operation outdoors or when the remote sensor is directly exposed

to sunlight or powerful lighting.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 55

(

)

Functions

With the camcorder’s Power

Switch set to the camera

With the camcorder’s Power Switch

set to “PLAY”.

Buttons

AUTO

MANUAL

”).

position (“

” or “

1 Infrared beam transmitting window Transmits the beam signal.

2 Zoom (T/W) Buttons

3 DISPLAY Button

4 SHIFT Button

Zoom in/out (੬ pg. 18)

Zoom in/out (੬ pg. 57)

੬ pg. 23, 50, 59

੬ pg. 57, 58

—

5 SLOW Rewind/Forward Buttons

—

੬ pg. 56

੬ pg. 57

Left/Right Buttons

6 REW Button

—

•Rewind/Reverse Shuttle Search on the

tape (੬ pg. 21)

•Displays previous page/file on the

memory card* (੬ pg. 28)

7 FADE/WIPE Button

8 EFFECT ON/OFF Button

9 EFFECT Button

0 PAUSE IN Connector

! START/STOP Button

@ MBR SET Button

—

੬ pg. 60

੬ pg. 56

੬ pg. 59

Functions the same as the Recording Start/Stop Button on the camcorder.

੬ pg. 58

Functions the same as SNAPSHOT on the camcorder.

—

# SNAPSHOT Button

$ Up Button

—

੬ pg. 57

੬ pg. 64

INSERT Button

% Down Button

—

੬ pg. 57

੬ pg. 63

A. DUB Button

^ PLAY Button

—

•Starts Playback of the tape (੬ pg. 21)

•Starts Auto Playback of the memory

card* (੬ pg. 28)

& FF Button

—

•Forward/Forward Shuttle Search on the

tape (੬ pg. 21)

•Displays next page/file on the memory

card* (੬ pg. 28)

* STOP Button

—

•Stops the tape (੬ pg. 21)

•Stops Auto Playback* (੬ pg. 28)

( PAUSE Button

) R.A.EDIT Buttons

—

Pauses the tape (੬ pg. 56)

੬ pg. 58 – 62

* GR-DVL1020/DVL820/DVL522 only.

Download from Www.Somanuals.com. All Manuals Search And Download.

56EN

USING THE REMOTE CONTROL UNIT (cont.)

Remote sensor

FEATURE: Slow-Motion Playback

PURPOSE:

To allow slow-speed search in either direction

during tape playback.

OPERATION:

1) To change from normal to Slow-Motion

Playback, press SLOW (

0) more than

approx. 2 seconds. After approx. 1 minute in

Slow Rewind or approx. 2 minutes in Slow

Forward, normal playback resumes.

Ⅲ To stop Slow-Motion Playback, press PLAY (4).

NOTES:

● You can also engage Slow-Motion Playback from

Still Playback by pressing SLOW more than approx.

2 seconds.

● During Slow-Motion Playback, due to digital image

processing, the picture may take on a mosaic effect.

● After SLOW (

0) is pressed and held, the still

SLOW

Forward Button

image may be displayed for a few seconds, followed

by a blue screen for a few seconds. This is not a

malfunction.

SLOW

Rewind Button

PLAY

● There may be a small margin between the slow-

motion playback start point you chose and the

actual start point for Slow-Motion Playback.

● During Slow-Motion Playback, there will be

disturbances in video and the picture may seem

unstable, especially with steady images. This is not

a malfunction.

EFFECT

ON/OFF

PAUSE

EFFECT

● During Slow-Motion Playback, press PAUSE (6) to

pause playback.

PLAYBACK EFFECT

OFF

PLAYBACK EFFECT

Select Menu

FEATURE: Frame-By-Frame Playback

PURPOSE:

To allow frame-by-frame search during tape

playback.

CLASS I C F I LM

MONOTONE

SEP I A

STROBE

OPERATION:

1) To change from normal to Frame-By-Frame

Playback, press SLOW (

or SLOW (

is pressed, the frame is played back.

0) repeatedly for forward

9) repeatedly for reverse. Each time it

NOTE:

You can also engage Frame-By-Frame Playback from

Still Playback by pressing SLOW ( or ) repeatedly.

FEATURE: Playback Special Effects

PURPOSE:

To allow you to add creative effects to the playback image.

OPERATION:

1) To start playback, press PLAY (4).

2) Point the remote control at the camcorder's remote sensor and press EFFECT. The PLAYBACK EFFECT

Select Menu appears.

3) Move the highlight bar to the desired effect by pressing EFFECT. The selected function is activated and

after 2 seconds the menu disappears.

Ⅲ To deactivate the selected effect, press EFFECT ON/OFF on the remote control. Pressing it again re-

activates the selected effect.

Ⅲ To change the selected effect, repeat from step 2 above.

NOTE:

The effects that can be used during playback are Classic Film, Monotone, Sepia and Strobe. The effects work the

same in playback as they did in recording. Refer to page 39 for more information.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 57

Remote sensor

FEATURE: Playback Zoom

PURPOSE:

To magnify the recorded image up to 70X at any

time during playback.

OPERATION:

1) Press PLAY (4) to find the scene of interest.

2) Press the Zoom Buttons (T/W) on the remote

control. Make sure the remote control is pointed

at the camcorder's remote sensor. Pressing T

zooms in.

3) You can move the image on screen around to

find a particular portion of the picture. While

holding down SHIFT, press

(Left),

(Right), (Up) and (Down).

Ⅲ To end zoom, press and hold W until magnifica-

tion returns to normal. Or, press STOP (5) and

Zoom Buttons

Up Button

then press PLAY (4).

SHIFT

NOTES:

Left Button

Down Button

● Zoom can also be used during slow-motion and still

playback.

● Due to ditital image processing, the quality of the

image may suffer.

PLAY

STOP

Right Button

Normal playback

To move image, press

(Right) while keeping

SHIFT held down.

Press T

Download from Www.Somanuals.com. All Manuals Search And Download.

58EN

USING THE REMOTE CONTROL UNIT (cont.)

Random Assemble Editing [R.A.Edit]

Create edited videos easily using your camcorder as

the source player. You can select up to 8 “cuts” for

automatic editing, in any order you like. R.A.Edit is

more easily performed when the MBR (Multi-Brand

Remote) is set to operate with your brand of VCR

(see VCR CODE LIST), but can also be performed by

operating the VCR manually.

VCR (Recording deck)

Before operation, make sure the batteries are

installed in the remote control (੬ pg. 54).

SET REMOTE/VCR CODE

SHIFT

MBR SET

Turn off the power to the VCR and point the

remote towards the VCR’s infrared sensor. Then,

referring to the VCR CODE LIST, press and hold

MBR SET, and enter the brand code.

The code is automatically set once you release MBR

SET, and the VCR’s power comes on.

Make sure the VCR’s power is on. Then, while

holding SHIFT, press the button on the remote for the

desired function. The functions the remote can control

are PLAY, STOP, PAUSE, FF, REW and VCR REC

STBY (you do not need to press SHIFT for this one).

8 9 `

You are now ready to try Random Assemble

Editing.

VCR CODE LIST

VCR BRAND

NAME

BRAND

CODE

VCR BRAND

NAME

BRAND

CODE

IMPORTANT

Although the MBR is compatible with JVC VCRs

and those of many other makers, it may not work

with yours or may offer limited functions.

AKAI

2ꢀ

4ꢀ

PHILIPS

9ꢀ

5ꢀ

1ꢀ

4ꢀ

1ꢀ

6ꢀ

2ꢀ

3ꢀ

2ꢀ

BLAUPUNKT

DAEWOO

NOTES:

● If the VCR’s power does not come on in step 1, try

another code from the VCR CODE LIST.

● Some brands of VCR do not come on automatically. In

this case, turn the power on manually and try step 2.

● If the remote control is not able to control the VCR, use

the controls on the VCR.

FERGUSON

7ꢀ

8ꢀ

ꢀ

SAMSUNG

SANYO

GRUNDIG

HITACHI

4ꢀ

● When the remote control’s batteries run out, the VCR

brand you have set will be erased.

In that case, replace the old battery with a new one to

reset the VCR brand.

6ꢀ

1ꢀ

5ꢀ

`ꢀ

9ꢀ

1ꢀ

6ꢀ

SELECO,

REX

JVC

1ꢀ

6ꢀ

SHARP

SONY

LG/GOLDSTAR

MITSUBISHI

7ꢀ

ꢀ

THOMSON,

TELEFUNKEN,

SABA,

1ꢀ

6ꢀ

7ꢀ

NEC

7ꢀ

PANASONIC

3ꢀ

7ꢀ

1ꢀ

4ꢀ

NORDMENDE

TOSHIBA

9ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 59

Connector cover**

MAKE CONNECTIONS

Also refer to pg. 22 and 23.

A JVC VCR equipped with a remote

pause connector . . .

..... connect the editing cable to the Remote PAUSE

connector.

A JVC VCR not equipped with a remote

pause connector but equipped with an

R.A.EDIT connector . . .

..... connect the editing cable to the R.A.EDIT

connector.

To EDIT***

or JLIP***

To S-VIDEO

To AV

A VCR other than above . . .

..... connect the editing cable to the remote control’s

Audio/Video

cable

(provided)

2 ^{PAUSE IN connector.}

Insert a recorded tape into the camcorder. Set the

S-Video

cable

(optional)

VIDEO/MEMORY Switch to “VIDEO” (GR-DVL1020/

DVL820/DVL522 only), then set the Power Switch to

“PLAY” while pressing down the Lock Button located

on the switch.

Editing

cable

(provided)

White to

AUDIO L IN

Turn the VCR power on, insert a recordable tape

and engage the AUX mode (refer to the VCR’s

instructions).

Yellow to

VIDEO IN*

Red to

AUDIO R IN

NOTES:

● Before Random Assemble Editing, make sure the

indications do not appear on the TV monitor. If they do,

they will be recorded onto the new tape.

S-VIDEO IN

To Remote

PAUSE or R.A.EDIT

To choose whether or not the following displays

appear on the connected TV . . .

• Date/Time

VCR

To PAUSE IN

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (੬ pg. 50).

Or, press DISPLAY on the remote control

(provided) to turn on/off the date indication.

• Time Code

DISPLAY

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (੬ pg. 50).

• Playback Sound Mode, Tape Speed And Tape Running

Displays

..... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu

Screen (੬ pg. 50).

● When editing on a VCR equipped with a DV input

connector, an optional DV cable can be connected

instead of an S-Video cable and audio/video cable.

Connect when an S-Video cable is not used.

** When connecting cables, open this cover.

*** JLIP : GR-DVL322

EDIT : GR-DVL1020/DVL820/DVL522

For GR-DVL322 Owners:

ATTENTION FOR EDITING CABLE

Make sure you connect the end with the core

filter (plug which has 3 rings around the pin) to

the camcorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

60EN

USING THE REMOTE CONTROL UNIT (cont.)

SELECT SCENES

Programme

Point the remote control at the camcorder’s

I N

OUT

MODE

Random Assemble

Editing Menu

– –

– – : – –

remote sensor. Press PLAY ( ) and then press

R.A.EDIT ON/OFF on the remote control.

The Random Assemble Editing Menu appears.

If using a Fade/Wipe at the beginning of the

scene, press FADE/WIPE on the remote control.

• Cycle through the effects by pressing repeatedly,

and stop when the one you want is displayed.

T I ME CODE

TOTAL

– –

00 : 00

At the beginning of the scene, press EDIT IN/

OUT on the remote control. The Edit-In position

appears in the Random Assemble Editing Menu.

Remote sensor

At the end of the scene, press EDIT IN/OUT. The

Edit-Out position appears in the Random Assemble

Editing Menu.

If using a Fade/Wipe at the end of the scene,

press FADE/WIPE.

• Cycle through the effects by pressing repeatedly,

and stop when the one you want is displayed.

• If you select a Fade/Wipe effect for an Edit-Out

point, the effect is automatically applied to the

following Edit-In point.

• When you use Fade/Wipe effects, that time is

included in the total time.

If using Playback Special Effects, press EFFECT

(੬ pg. 56).

10 Repeat steps 6 through 9 to register additional

• To change previously registered points, press

CANCEL on the remote control. The registered

points disappear, one at a time, from the most

recently registered point.

REW

PLAY

scenes.

FADE/WIPE

EFFECT

R.A.EDIT

ON/OFF

EDIT IN/OUT

• If you are not using Fade/Wipe or Programme AE

with special effects, repeat steps 6 and 7 only.

CANCEL

NOTES:

● When choosing a scene, set Edit-In and Edit-Out points so that there is a relatively large difference between them.

● If the search time for an in-point exceeds 5 minutes, the recording deck’s Record-Standby mode will be cancelled and

editing will not take place.

● If there are blank portions before or after the Edit-In and Edit-Out points, a blue screen may be included in the edited

version.

● Since time codes register time only as accurately as seconds, the time code total time may not match the total

programme time exactly.

● Turning off the camcorder’s power erases all registered Edit-In and Edit-Out points.

● If you select Sepia or Monotone mode from Programme AE with special effects, you cannot use the Black & White

Fader. In this case the Black & White indicator begins blinking. Once the next Edit-In point is registered, the effect is

turned off. To combine these effects, use Sepia or Monotone during recording, then use the Black & White Fader

during Random Assemble Editing.

● It is not possible to use Fade/Wipe effects and Programme AE with special effects during Random Assemble Editing

using a DV cable.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 61

AUTOMATIC EDITING TO VCR

11 Rewind the tape in the camcorder to the

beginning of the scene you want to edit and press

PAUSE (6).

12 Point the remote control towards the VCR’s

remote sensor and press VCR REC STBY (q6), or

manually engage the VCR’s Record-Pause mode.

13 Press the Recording Start/Stop Button on the

camcorder. Editing proceeds as programmed, right

through to the end of the last registered scene.

• When dubbing is complete, the camcorder enters

the Pause mode, and the VCR enters its Record-

Pause mode.

• If you do not register an Edit-Out point, the tape will

be dubbed all the way to the end automatically.

• If you operate the camcorder during automatic

editing, the VCR will enter its Record-Pause mode

and automatic editing will stop.

Recording Start/Stop Button

I N

OUT

MODE

Random Assemble

Editing Menu

00 : 25

07 : 18

03 : 33

09 : 30

15 : 55

02 : 05 – – – –

08 : 31 – – – –

05 : 53

– –

13 : 15

16 : 29 – – – –

– –

– – – –

T I ME CODE

TOTAL

1 6

3 0

14 Engage the Stop modes for the camcorder and

9 : 39

the VCR.

To make the R.A.Edit counter display disappear,

press R.A.EDIT ON/OFF on the remote control.

Remote Sensor

NOTES:

● Pressing R.A.EDIT ON/OFF on the remote control

clears all settings registered during Random Assemble

Editing.

● When the editing cable is connected to the remote

control’s Pause In connector during dubbing, make sure

the remote control is pointed at the VCR’s sensor, and

the path between the two is unobstructed.

● Random Assemble Editing may not function properly

when using a tape including several duplicated time

codes (੬ pg. 20).

CONTINUED ON NEXT PAGE

PAUSE

R.A.EDIT

ON/OFF

VCR REC STBY

Download from Www.Somanuals.com. All Manuals Search And Download.

62EN

USING THE REMOTE CONTROL UNIT (cont.)

Programme 1

For More Accurate Editing

Some VCRs make the transition from Record-Pause

to Record mode faster than others. Even if you begin

editing for the camcorder and the VCR at exactly the

same time, you may lose scenes you wanted, or find

that you have recorded scenes you did not want. For

a cleanly edited tape, confirm and adjust the timing of

the camcorder against your VCR.

I N

– – : – –

OUT

MODE

Random Assemble

Editing Menu

– –

T I ME CODE

TOTAL

– –

00 : 00

DIAGNOSING VCR/CAMCORDER TIMING

VIDEO Menu

Play back the tape in the camcorder, then point

the remote control at the camcorder’s remote sensor

and press R.A.EDIT ON/OFF.

SYNCHRO

–

O . 1

The Random Assemble Editing Menu appears.

Perform Random Assemble Editing on Pro-

gramme 1 only. In order to check VCR and

camcorder timing, select the beginning of a scene

transition as your Edit-In point.

Play back the dubbed scene.

Remote sensor

• If any images from the scene prior to the transition

you chose for your Edit-In point were recorded, that

means your VCR moves too quickly from Record-

Pause to Record mode.

• If the scene you tried to dub starts in progress, the

VCR is slow to start recording.

ADJUSTMENT OF VCR/CAMCORDER TIMING

Point the remote control at the camcorder’s

remote sensor and press R.A.EDIT ON/OFF to make

the Random Assemble Editing menu disappear, then

press the MENU/BRIGHT wheel in. The Menu

Screen appears.

Rotate the MENU/BRIGHT wheel to select “

VIDEO” and press it. The VIDEO Menu appears.

Then, rotate it to “SYNCHRO” and press it. The value

for “SYNCHRO” is highlighted.

Based on the diagnostics performed, you can

now advance the VCR’s record timing by rotating the

MENU/BRIGHT wheel towards “+”. You can also

delay the VCR’s record timing by rotating the MENU/

BRIGHT wheel towards “–”. The adjustment range is

from –1.3 to +1.3 seconds, in 0.1-second increments.

Press the MENU/BRIGHT wheel in to finish the

setting.

R.A.EDIT

ON/OFF

Rotate the MENU/BRIGHT wheel to select

RETURN” and press it twice.

Now perform Random Assemble Editing beginning

“

with step 4 on page 60.

NOTES:

● Before performing actual Random Assemble Editing, do

a few Random Assemble Editing trial runs to check

whether the value you have input is appropriate or not,

and make adjustments accordingly.

● Depending on the recorder, there may be situations

where the timing difference cannot be fully corrected.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 63

Display

Audio Dubbing

Audio Dub

Standby mode

The audio track can be customized only when

recorded in the 12-bit mode (੬ pg. 47).

NOTES:

● Audio Dubbing is not possible on a tape recorded in 16-

bit audio, on a tape recorded in the LP mode or on a

blank portion of a tape.

● To perform Audio Dubbing while watching on the

television, make connections (੬ pg. 22).

Power Switch

Play back the tape to locate the point where

editing will start, then press PAUSE (6).

While holding A.DUB (e) on the remote control,

press PAUSE (6). “6e” appears.

Press PLAY ( ) , then begin “narrating”.

Speak into the microphone.

• To pause dubbing, press PAUSE (6).

To end Audio Dubbing, press PAUSE (6), then

STOP (5).

Speaker

To hear the dubbed sound during playback . . .

..... set “12BIT MODE” to “SOUND 2” or “MIX” in the

Menu Screen (੬ pg. 50, 51).

Remote sensor

NOTES:

● Sound is not heard from the speaker during Audio

Dubbing.

● When editing onto a tape that was recorded at 12-bit,

the old and new soundtracks are recorded separately.

● If you dub onto a blank space on the tape, the sound

may be disrupted. Make sure you only edit recorded

areas.

● If feedback or howling occurs during TV playback, move

the camcorder’s microphone away from the TV, or turn

down the TV’s volume.

● If you change from 12-bit to 16-bit in mid-recording and

then use the tape for Audio Dubbing, it is not effective

from the point where 16-bit recording began.

● During Audio Dubbing, when the tape moves to scenes

recorded in the LP mode, scenes recorded in 16-bit

audio or a blank portion, Audio Dubbing stops

(੬ pg. 85).

Stereo

microphone

● To perform Audio Dubbing with a video unit connected

to the camcorder’s AV connector, first set

“S/AV INPUT” to “ON” in the Menu Screen

(GR-DVL1020/DVL820 only ੬ pg. 50).

A.DUB

PLAY

PAUSE

STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

64EN

USING THE REMOTE CONTROL UNIT (cont.)

Insert Editing

You can record a new scene into a previously

recorded tape, replacing a section of the original

recording with minimal picture distortion at the in and

outpoints. The original audio remains unchanged.

NOTES:

● Before performing the following steps, make sure that

“TIME CODE” is set to “ON” in the Menu Screen

(੬ pg. 49, 51).

● Insert Editing is not possible on a tape recorded in the

LP mode or on a blank portion of a tape.

● To perform Insert Editing while watching in the

television, make connections (੬ pg. 22).

Power Switch

Lock Button

Play back the tape, locate the Edit-Out point and

press PAUSE (6). Confirm the time code at this point

(੬ pg. 49, 51).

Display

Press REW (

then press PAUSE (6).

2) until the Edit-In point is located,

Press and hold INSERT (w) on the remote

control, then press PAUSE (6). “6w” and the Time

Code (min.:sec.) appear and the camcorder enters

Insert-Pause mode.

12 : 34

Press START/STOP to begin editing.

• Confirm the insert at the time code you checked in

step 1.

Remote sensor

• To pause editing, press START/STOP. Press it again

to resume editing.

To end Insert Editing, press START/STOP, then

STOP (5).

NOTES:

● Programme AE with special effects (੬ pg. 38, 39) can

be used to spice up the scenes being edited during

Insert Editing.

● During Insert Editing, the date and time information

changes.

● If you perform Insert Editing onto a blank space on the

tape, the audio and video may be disrupted. Make sure

you only edit recorded areas.

● During Insert Editing, when the tape moves to scenes

recorded in the LP mode or a blank portion, Insert

Edting stops (੬ pg. 86).

START/STOP

INSERT

PLAY

REW

STOP

PAUSE

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 65

SYSTEM CONNECTIONS

[A] Using USB or PC connection cable

GR-DVL322 only

RS-232C

PC connection cable

(provided)

To PC

USB cable

(provided)

To USB

connector

GR-DVL1020/DVL820/DVL522 only

[B] Using DV cable

Power Switch

Core filter

To DV

DV cable (optional)

To DV

connector

PC with DV

connector

VIDEO/MEMORY

Switch (GR-DVL1020/DVL820/DVL522 only;

open the LCD monitor to access this switch.)

NOTES:

Connection To A Personal Computer

● Refer to “SOFTWARE INSTALLATION AND USB (or

PC) CONNECTION GUIDE” for the installation of the

bundled software and drivers.

[A] Using USB or PC connection cable

This camcorder can transfer still images to a PC by

using the software.

● It is recommended to use the AC Adapter as the

power supply instead of the battery pack (੬ pg. 9).

● Never connect the USB or PC connection cable and

the DV cable simultaneously to the camcorder.

Connect only the cable you wish to use to the

camcorder.

[B] Using DV cable

It is also possible to transfer still images to a PC with

a DV connector by using software equipped with the

PC or commercially available software.

● If the PC connected to the camcorder via the USB

cable is not powered, the camcorder does not enter the

USB mode.

● The date/time information cannot be captured into the

PC.

2 ^{Make sure the camcorder and PC are turned off.}

Connect the camcorder to your PC using the

appropriate cable as shown in the illustration.

For GR-DVL1020/DVL820/DVL522 Owners:

● Refer to the instruction manuals of the PC and

Software.

If you are using the USB connection, set the VIDEO/

MEMORY switch to “MEMORY”.

● The still images can also be transferred to a PC with a

DV connector-equipped capture board.

● When using a DV cable, be sure to use the optional

JVC VC-VDV206U or VC-VDV204U DV cable

depending on the type of DV connector (4 or 6 pins)

on the PC, or use the DV cable provided with the

capture board.

Turn the camcorder’s Power Switch to “PLAY”

while pressing down the Lock Button located on the

switch and turn on the PC.

• Refer to the instruction manual of the software on

how to transfer a still image to the PC.

● The system may not work properly depending on the

PC or capture board you are using.

When finished, turn off the PC first, then the

camcorder.

For GR-DVL1020/DVL820/DVL522 Owners:

“ACCESSING FILES” appears on the LCD monitor

while the PC is accessing data in the camcorder or

the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “AC-

CESSING FILES” is displayed on the LCD monitor

since this can result in product damage.

Download from Www.Somanuals.com. All Manuals Search And Download.

66EN

SYSTEM CONNECTIONS (cont.)

VIDEO/MEMORY Switch

(Open the LCD monitor

to access this switch.)

Using The Camcorder As A WebCam

(GR-DVL1020 only)

Power Switch

This camcorder can be used as a WebCam via USB

connection.

Make sure all necessary software (provided) are

installed in your PC and all units are turned off.

Connect the camcorder to your PC using the USB

cable.

Set the VIDEO/MEMORY Switch to “MEMORY”

AUTO

MANUAL

”,

and set the Power Switch to “

” or “

then turn on the PC.

• “Web CAMERA” appears on the screen.

To USB

• If the PC is not powered on, the camcorder does not

enter the Web Camera mode.

When finished, turn off the PC first, then the

camcorder. Disconnect the USB cable from the

camcorder and PC.

USB cable

(provided)

NOTES:

● It is recommended to use the AC Adapter as the

power supply instead of the battery pack (੬ pg. 9).

● Use the provided software PIXELA ImageMixer to

capture video in real-time.

● You can also use the camcorder for webconference by

using Windows^®Microsoft Netmeeting and signing up

for Microsoft Hotmail.

To USB

connector

● In the Web Camera mode, the following buttons cannot

be operated: E-MAIL, SNAPSHOT, the Recording

Start/Stop button.

Refer to the instruction manuals of the PC and

provided Software.

USB-equipped PC

Display

Web CAMERA

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 67

REFERENCES

CONTENTS

DETAILS ............................................ 68

TROUBLESHOOTING ....................... 69 – 73

USER MAINTENANCE ............................. 74

CAUTIONS .................................. 75 – 77

SPECIFICATIONS ........................... 78 – 79

INDEX ....................................... 80 – 86

Controls, Connectors And Indicators ....... 80 – 81

Indications ................................... 82 – 86

TERMS ........................ 87 – Back Cover

Download from Www.Somanuals.com. All Manuals Search And Download.

68EN

DETAILS

I T E M S

N O T E S

❍ Perform charging where the temperature is between 10°C and 35°C. 20°C to

25°C is the ideal temperature range for charging. If the environment is too

cold, charging may be incomplete.

➪ Power

(੬ pg. 8)

❍ Charging times are for a fully discharged battery pack.

❍ Charging time varies according to the ambient temperature and the status of

the battery pack.

❍ To avoid interference with reception, do not use the AC Adapter near a radio.

❍ Since the AC Adapter processes electricity internally, it becomes warm

during use. Be sure to use it only in well-ventilated areas.

❍ The following operation stops charging:

• Set the Power Switch to “PLAY”, “

AUTO

MANUAL

”.

” or “

• Disconnect the AC adapter from the camcorder.

• Unplug the AC adapter’s power cord from the AC outlet.

• Detach the battery from the camcorder.

❍ When you use the LCD monitor outdoors in direct sunlight, the LCD monitor

may be difficult to see. If this happens, use the viewfinder instead.

➪ TAPE

RECORDING

(੬ pg. 16, 17)

❍ The cassette holder cannot be opened unless a power supply is attached.

❍ There may be a delay after you open the cassette holder cover until the

cassette holder opens. Do not use force.

❍ Once the cassette holder is closed, it recedes automatically. Wait until it

recedes completely before closing the cassette holder cover.

❍ When the Recording Start/Stop button is pressed, it may take a few seconds

before actual recording starts. “

actually starts recording.

” starts rotating when the camcorder

❍ The time required to calculate and display the remaining tape length, and the

accuracy of the calculation, may vary according to the type of tape used.

❍ “TAPE END” appears when the tape reaches its end, and the power goes off

automatically if left in this condition for 5 minutes. “TAPE END” also appears

when a cassette at its end is loaded.

About Batteries

DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause

a fire or explosion.

WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short

circuit and possibly start a fire.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but have a large power capacity. However, when one is exposed to cold

temperatures (below 10°C), its usage time becomes shorter and it may cease to function. If this happens, place

the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the camcorder.

As long as the battery pack itself is not cold, it should not affect performance.

(If you’re using a heating pad, make sure the battery pack does not come in direct contact with it.)

Lithium-ion is vulnerable in colder temperatures.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 69

TROUBLESHOOTING

If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer.

The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,

etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery

pack, AC Adapter, etc.) and wait a few minutes; and then re-connect it and proceed as usual from the

beginning.

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

1 No power is supplied.

• The power is not connected

properly.

• The battery is dead.

• Connect the AC Adapter securely

(੬ pg. 9).

• Replace the dead battery with a

fully charged one (੬ pg. 8, 9).

2 “SET DATE/TIME!” appears. • The date/time is not set.

• The built-in clock battery has run

• Set the date/time (੬ pg. 11).

• Consult your nearest JVC dealer

for replacement.

out and the previously set date/time

has been erased.

3 Recording cannot be

— For Tape Recording —

• The tape’s erase protection tab is

set to “SAVE”.

• The Power Switch is set to “PLAY”

or “OFF”.

• Set the tape’s erase protection tab

to “REC” (੬ pg. 12).

AUTO

performed.

• Set the Power Switch to “

” or

MANUAL

“

” (੬ pg. 17).

• Set the VIDEO/MEMORY Switch to

“VIDEO”.

• The VIDEO/MEMORY Switch is set

to “MEMORY”.

• Replace with new cassette

• “TAPE END” appears.

(੬ pg. 12).

• The cassette holder cover is open.

— For Memory Card Recording —

• The VIDEO/MEMORY Switch is set

to “VIDEO”.

• Close the cassette holder cover.

• Set the VIDEO/MEMORY Switch to

“MEMORY”.

4 There is no picture.

• The camcorder is not getting power, • Turn the camcorder’s power off and

or some other malfunction exists.

on again (੬ pg. 17).

5 The focus does not adjust

• Focus is set to the Manual mode.

• The recording was done in a dark

place, or the contrast was low.

• The lens is dirty or covered with

condensation.

• Set Focus to the Auto mode

(੬ pg. 43).

• Clean the lens and check the focus

again (੬ pg. 74).

automatically.

CONTINUED ON NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

70EN

TROUBLESHOOTING (cont.)

CORRECTIVE ACTION

SYMPTOM

POSSIBLE CAUSES

6 The cassette will not load

• The cassette is in the wrong

position.

• The battery’s charge is low.

• Set it in the right position

(੬ pg. 12).

• Install a fully charged battery

(੬ pg. 8, 9).

properly.

7 The memory card will not

• The memory card is in the wrong

position.

• Set it in the right position

(੬ pg. 14).

load properly.

8 Snapshot mode cannot be

• The Squeeze mode is selected.

• Disengage the Squeeze mode

(੬ pg. 48).

used.

9 The colour of Snapshot

• The light source or the subject does • Find a white subject and compose

looks strange.

not include white. Or there are

various different light sources

behind the subject.

your shot so that it also appears in

the frame (੬ pg. 26, 42).

• Turn off Sepia and Monotone

(੬ pg. 38, 39).

• The Sepia or Monotone mode is

activated.

0 The image taken using

• Shooting was performed under

backlit conditions.

• Press the BACKLIGHT Button

(੬ pg. 44).

Snapshot is too dark.

! The image taken using

• The subject is too bright.

• Set “PROGRAMME AE” to

“SPOTLIGHT” in the Menu Screen

(੬ pg. 38).

Snapshot is too bright.

@ Digital Zoom does not work. • 10X optical zoom is selected.

• The VIDEO/MEMORY Switch is set

to “MEMORY”.

• Set “ZOOM” to “40X” or “700X” in

the Menu Screen (੬ pg. 47).

• Set the VIDEO/MEMORY Switch to

“VIDEO” (੬ pg. 17, 18).

# The Black & White Fader

• The Sepia or Monotone mode is

activated.

• Turn off Sepia and Monotone

(੬ pg. 38, 40).

does not work.

$ Even when Slow Shutter is

not selected, the image

looks like it is activated.

• When shooting in the dark, the unit • If you want the lighting to look

becomes highly sensitive to light

and the image takes on an effect

similar to Slow Shutter.

more natural, set GAIN UP to

“AGC” or “OFF” in the Menu

Screen (੬ pg. 47).

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 71

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

% White Balance cannot be

• The Sepia or Monotone mode is

activated.

• Turn off Sepia or Monotone before

setting White Balance (੬ pg. 39,

45).

activated.

^ When shooting a subject

illuminated by bright light,

vertical lines appear.

• This is a result of exceedingly high

contrast, and is not a malfunction.

————

& When the screen is under

direct sunlight during

shooting, the screen

becomes red or black for an

instant.

• This is not a malfunction.

* During recording, the date/

• “DATE/TIME” is set to “OFF” in the

Menu Screen.

• Set “DATE/TIME” to “ON” in the

Menu Screen (੬ pg. 49).

time does not appear.

( Files stored on the memory • Files stored on the memory card

card cannot be deleted. are protected.

• Remove protection from the files

stored on the memory card and

delete them (੬ pg. 30, 31).

) Time code does not appear. • “TIME CODE” is set to “OFF” in the • Set “TIME CODE” to “ON” in the

Menu Screen.

Menu Screen (੬ pg. 49, 50).

q Images on the LCD monitor • In places subject to low tempera-

• Adjust the brightness and angle of

the LCD monitor (੬ pg. 16, 17).

appear dark or whitish.

ture, images become dark due to

the characteristics of the LCD

monitor. When this happens, the

displayed colours differ from those

that are actually recorded. This is

not a defect of the camcorder.

• When the LCD monitor's fluores-

cent light reaches the end of its

service life, images on the LCD

monitor become dark. Consult your

nearest JVC dealer.

CONTINUED ON NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

72EN

TROUBLESHOOTING (cont.)

CORRECTIVE ACTION

SYMPTOM

POSSIBLE CAUSES

w The rear of the LCD monitor • The light used to illuminate the LCD • Close the LCD monitor to turn it off

is hot.

monitor causes it to become hot.

or set the Power Switch to “OFF”,

and let the unit cool down.

e The indicators and the

image colour on the LCD

monitor are not clear.

• This may occur when the surface or

the edge of the LCD monitor is

pressed.

————

r The LCD monitor or

• Certain Fade/Wipe effects, certain

modes of Programme AE with

special effects, “DIS” and other

functions that cannot be used

together are selected at the same

time.

• Re-read the sections covering

Fade/Wipe effects, Programme AE

with special effects and “DIS”

(੬ pg. 38 – 41, 47).

viewfinder indications blink.

t Coloured bright spots

appear all over the LCD

monitor or the viewfinder.

• The LCD monitor and the view-

finder are made with high-precision

technology. However, black spots or

bright spots of light (red, green or

blue) may appear constantly on the

LCD monitor or the viewfinder.

These spots are not recorded on

the tape. This is not due to any

defect of the unit. (Effective dots:

more than 99.99 %)

————

y During recording, sound

• This is normal.

cannot be heard.

AUTO

u Play, Rewind and Fast-

Forward functions do not

work.

• The Power Switch is set to “

”

• Set the Power Switch to “PLAY”

(੬ pg. 21).

MANUAL

or “

”.

AUTO

i A memory card cannot be

• The Power Switch is set to “

• Set the Power Switch to “PLAY”

(੬ pg. 28).

MANUAL

played back.

or “

”.

• The VIDEO/MEMORY Switch is set • Set the VIDEO/MEMORY

to “VIDEO”.

Switch to “MEMORY”.

o The LCD monitor image is

• During playback of the unrecorded

portion, High-speed Search and still

playback, LCD monitor indications

appear distorted. This is not a

defect.

distorted.

————

p Images on the LCD monitor • The speaker volume is too great.

• Turn the speaker volume down

(੬ pg. 21).

are jittery.

Q Blocks of noise appear

• Clean the video heads with an

optional cleaning cassette

(੬ pg. 76).

during playback, or there is

————

no playback picture and the

screen becomes blue.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 73

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

W The LCD monitor, the

viewfinder and the lens

have become dirty (ex.

fingerprints).

• Wipe them gently with soft cloth.

Wiping strongly can cause damage

(੬ pg. 74).

————

E An unusual mark appears.

• Check the section of the manual

that explains LCD monitor/

viewfinder indications

————

(੬ pg. 82 – 86).

R An error indication

• A malfunction of some kind has

occurred. In this case the

camcorder’s functions become

unusable.

• Remove the power supply (battery

pack, etc.) and wait a few minutes

for the indication to clear. When it

does, you can resume using the

camcorder. If the indication

(E01, E02 or E06) appears.

remains even though you repeat

the above two or three times,

please consult your nearest JVC

dealer. Do not eject the cassette.

This will cause damage to the tape.

T An error indication

• A malfunction of some kind has

occurred. In this case the

camcorder’s functions become

unusable.

• Eject the cassette once and re-

insert it, then check if the indication

clears. When it does, you can

resume using the camcorder. If the

indication remains even though

you repeat the above two or three

times, please consult your nearest

JVC dealer.

(E03 or E04) appears.

Y The charger indicator on

the camcorder does not

light.

• The temperature of the battery is

extremely high/low.

• Charging is difficult in places

subject to extremely high/low

temperatures.

• To protect the battery, it is

recommended to charge it in

places with a temperature of 10°C

to 35°C (੬ pg. 75).

U When the image is printed

from the printer, a black bar

appears at the bottom of

the screen.

• This is not a malfunction.

• By recording with “DIS” activated

(੬ pg. 47) this can be avoided.

I When the camcorder is

connected via the DV

connector, the camcorder

does not operate.

• The DV cable was plugged/

unplugged with power turned on.

• Turn the camcorder’s power off

and on again, then operate it.

O The memory card cannot

be removed from the

camcorder.

• Push in the memory card a few

more times (੬ pg. 14).

————

Download from Www.Somanuals.com. All Manuals Search And Download.

74EN

After Use

USER MAINTENANCE

Cleaning The Camcorder

To clean the exterior, wipe gently with a soft cloth.

Put the cloth in diluted mild soap and wring it well to

wipe off heavy dirt. Then wipe again with a dry cloth.

2 ^{Turn off the camcorder.}

Slide and hold OPEN/EJECT in the direction of

the arrow, then pull the cassette holder cover open

until it locks. The cassette holder opens automatically.

Remove the cassette.

Press PUSH OPEN and open the LCD monitor.

Wipe gently with a soft cloth. Be careful not to

damage the monitor. Close the LCD monitor.

Press “PUSH HERE” to close the cassette holder.

• Once the cassette holder is closed, it recedes

automatically. Wait until it recedes completely before

closing the cassette holder cover.

To clean the lens, blow it with a blower brush,

then wipe gently with lens cleaning paper.

To clean the viewfinder, raise it to the vertical

Tilt the viewfinder upward 1. Press BATT.

position. Open the viewfinder cleaning hatch in the

RELEASE 2 and remove the battery pack 3 .

direction of the arrow 1.

Insert a lens blower or soft cloth into the gap at

the bottom of the viewfinder and clean the interior of

the viewfinder with it 2.

Close the hatch. Tilt the viewfinder back to the

horizontal position.

NOTES:

● Avoid using strong cleaning agents such as benzine or

alcohol.

Remove.

● Cleaning should be done only after the battery pack

has been removed or other power units have been

disconnected.

Cassette holder

● Mould may form if the lens is left dirty.

● When using a cleaner or chemically treated cloth refer

to the cautions of each product.

OPEN/EJECT

Switch

Cassette holder cover

PUSH HERE

BATT. RELEASE Button

Hatch

Lens blower

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 75

CAUTIONS

Video Light

Battery Packs

The supplied battery pack is a

DANGER

lithium-ion battery. Before using

the supplied battery pack or an

optional battery pack, be sure to

read the following cautions:

Ⅲ The video light can become extremely

hot. Do not touch it either while in

operation or soon after turning it off,

otherwise serious injury may result.

Ⅲ Do not place the camcorder into the

carrying case immediately after using the video

light, since it remains extremely hot for some time.

Ⅲ When operating, keep a distance of about 30 cm

between the video light and people or objects.

Ⅲ Do not use near flammable or explosive materials.

Ⅲ Do not place the camcorder in a cabinet or box

while the video light is in operation.

Ⅲ When using the video light, if you wish to install the

camcorder in a fixed position, attach it to a tripod,

etc. Do not affix it directly to a surface such as a

table top.

1. To avoid hazards . . .

... do not burn.

... do not short-circuit the terminals. When

transporting, make sure the provided battery cap

is attached to the battery. If the battery cap is

misplaced, carry the battery in a plastic bag.

... do not modify or disassemble.

Terminals

... do not expose the battery to temperatures

exceeding 60°C, as this may cause the battery

to overheat, explode or catch fire.

... use only specified chargers.

2. To prevent damage and prolong service life . . .

... do not subject to unnecessary shock.

... charge in an environment where temperatures

are within the tolerances shown in the chart

below. This is a chemical reaction type battery—

cooler temperatures impede chemical reaction,

while warmer temperatures can prevent

complete charging.

... store in a cool, dry place. Extended exposure to

high temperatures will increase natural

discharge and shorten service life.

... fully charge and then fully discharge the battery

every 6 months when storing the battery pack

over a long period time.

Ⅲ It is recommended that you consult your nearest

JVC dealer for replacing the video light.

General Battery Precautions

If the remote control is not functioning even if it is

being operated correctly, the batteries are exhausted.

Replace them with fresh ones.

Use only the following batteries: AAA (R03) size x 2

Please make note of the following rules for battery

use. When misused, the batteries can leak or

explode.

... remove from charger or powered unit when not

in use, as some machines use current even

when switched off.

1. When replacing batteries, refer to page 54.

2. Do not use any different size of batteries from

those specified.

3. Be sure to install batteries in the correct direction.

4. Do not use rechargeable batteries.

5. Do not expose the batteries to excessive heat as

NOTES:

● It is normal for the battery pack to be warm after

charging, or after use.

Temperature Range Specifications

Charging ................ 10°C to 35°C

Operation ............... 0°C to 40°C

Storage .................. –10°C to 30°C

● Recharging time is based on room temperature of

20°C.

they can leak or explode.

6. Do not dispose of the batteries in a fire.

7. Remove the batteries from the unit if it is to be

stored for an extended period to avoid battery

leakage which can cause malfunctions.

8. Do not recharge the provided batteries.

● The lower the temperature, the longer recharging takes.

Cassettes

To properly use and store your cassettes, be sure to

read the following cautions:

1. During use . . .

... make sure the cassette bears the Mini DV mark.

... be aware that recording onto prerecorded tapes

automatically erases the previously recorded

video and audio signals.

... make sure the cassette is positioned properly

when inserting.

... do not load and unload the cassette repeatedly

without allowing the tape to run at all. This

slackens the tape and can result in damage.

... do not open the front tape cover. This exposes

the tape to fingerprints and dust.

Download from Www.Somanuals.com. All Manuals Search And Download.

76EN

CAUTIONS (cont.)

2. Avoid using the unit . . .

... in places subject to excessive humidity or dust.

... in places subject to soot or steam such as near

a cooking stove.

... in places subject to excessive shock or vibration.

... near a television set.

... near appliances generating strong magnetic or

electric fields (speakers, broadcasting antennas,

etc.).

... in places subject to extremely high (over 40°C)

extremely low (under 0°C) temperatures.

2. Store cassettes . . .

... away from heaters or other heat sources.

... out of direct sunlight.

... where they won’t be subject to unnecessary

shock or vibration.

... where they won’t be exposed to strong magnetic

fields (such as those generated by motors,

transformers or magnets).

... vertically, in their original cases.

Memory Cards

3. DO NOT leave the unit . . .

... in places of over 50°C.

... in places where humidity is extremely low (below

35%) or extremely high (above 80%).

... in direct sunlight.

... in a closed car in summer.

... near a heater.

4. To protect the unit, DO NOT . . .

... allow it to become wet.

... drop the unit or strike it against hard objects.

... subject it to shock or excessive vibration during

transportation.

... keep the lens directed at extremely bright

objects for long periods.

... expose the lens to direct sunlight.

... carry it by holding the LCD monitor or the

viewfinder.

... swing it excessively when using the shoulder

strap or the grip.

To properly use and store your memory cards, be

sure to read the following cautions:

1. During use . . .

... make sure the memory card bears the SD or

MultiMediaCard mark.

... make sure the memory card is positioned

properly when inserting.

2. While the memory card is being accessed

(during recording, playback, deletion, initializa-

tion, etc.) . . .

... never unload the memory card and never turn

off the camcorder.

3. Store memory cards . . .

... away from heaters or other heat sources.

... out of direct sunlight.

... where they won’t be subject to unnecessary

shock or vibration.

... where they won’t be exposed to strong magnetic

fields (such as those generated by motors,

transformers or magnets).

5. Dirty heads can cause the following problems:

LCD Monitor

1. To prevent damage to the LCD monitor,

DO NOT . . .

... push it strongly or apply any shocks.

... place the camcorder with the LCD monitor on

the bottom.

2. To prolong service life . . .

... avoid rubbing it with coarse cloth.

3. Be aware of the following phenomena for LCD

monitor use.

These are not malfunctions:

• While using the camcorder, the surface around

the LCD monitor and/or the back of the LCD

monitor may heat up.

• If you leave power on for a long time, the surface

around the LCD monitor becomes hot.

• No picture during playback.

• Blocks of noise appear during playback.

• During recording or playback, the Head Clog

Warning indicator “ ” appears.

• Recording cannot be performed properly.

In such cases, use an optional cleaning cassette.

Insert it and play back. If the cassette is used more

than once consecutively, damage to the video

heads may result. After the camcorder plays back

for about 20 seconds, it stops automatically. Also

refer to the cleaning cassette’s instructions.

If, after using the cleaning cassette, the problems

still exist, consult your nearest JVC dealer.

Mechanical moving parts used to move the video

heads and video tape tend to become dirty and

worn out over time. In order to maintain a clear

picture at all times, periodic check-ups are

recommended after using the unit for about 1,000

hours. For periodic check-ups please consult your

nearest JVC dealer.

Main Unit

1. For safety, DO NOT . . .

... open the camcorder’s chassis.

... disassemble or modify the unit.

... short-circuit the terminals of the battery pack.

Keep it away from metallic objects when not in

use.

... allow inflammables, water or metallic objects to

enter the unit.

... remove the battery pack or disconnect the

power supply while the power is on.

... leave the battery pack attached when the

camcorder is not in use.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 77

Serious malfunctioning

How to handle a CD-ROM

If malfunctioning occurs, stop using the unit

immediately and consult your local JVC dealer.

• Take care not to soil or scratch the mirror surface

(opposite to the printed surface). Do not write

anything or put a sticker on either the front or back

surface. If the CD-ROM gets dirty, gently wipe it with

a soft cloth outward from the centre hole using a

circular motion.

• Do not use conventional disc cleaners or cleaning

spray.

• Do not bend the CD-ROM or touch its mirror

surface.

• Do not store your CD-ROM in a dusty, hot or humid

environment. Keep it away from direct sunlight.

The camcorder is a microcomputer-controlled

device. External noise and interference (from a

TV, a radio, etc.) might prevent it from functioning

properly. In such cases, first disconnect its power

supply unit (battery pack, AC Adapter, etc.) and

wait a few minutes and then re-connect it and

proceed as usual from the beginning.

About moisture condensation . . .

● You have observed that pouring a cold liquid

into a glass will cause drops of water to form

on the glass‘ outer surface. This same

phenomenon occurs on the head drum of a

camcorder when it is moved from a cool place

to a warm place, after heating a cold room,

under extremely humid conditions or in a place

directly subjected to the cool air from an air

conditioner.

● Moisture on the head drum can cause severe

damage to the video tape, and can lead to

internal damage to the camcorder itself.

Download from Www.Somanuals.com. All Manuals Search And Download.

78EN

SPECIFICATIONS

Camcorder

General

Power supply

: DC 11.0 V

DC 7.2 V

(Using AC Adapter)

(Using battery pack)

Power consumption

LCD monitor off, viewfinder on

: Approx. 4.5 W (GR-DVL1020/DVL820)

Approx. 4.3 W (GR-DVL522/DVL322)

LCD monitor on, viewfinder off

Video light

: Approx. 5.7 W (GR-DVL1020/DVL820)

Approx. 5.3 W (GR-DVL522/DVL322)

: Approx. 2.8 W (GR-DVL1020/DVL820)

Approx. 3.5 W (GR-DVL522/DVL322)

Dimensions (W x H x D)

: 79 mm x 89 mm x 184 mm

(GR-DVL1020/DVL820)

79 mm x 89 mm x 167 mm

(GR-DVL522/DVL322)

(with the LCD monitor closed and the viewfinder pushed down)

: Approx. 580 g (GR-DVL1020)

Approx. 570 g (GR-DVL820)

Approx. 560 g (GR-DVL522)

Approx. 550 g (GR-DVL322)

: 0°C to 40°C

: 35% to 80%

: –20°C to 50°C

: 1/3.8" CCD (GR-DVL1020/DVL820)

1/4" CCD (GR-DVL522/DVL322)

Weight

Operating temperature

Operating humidity

Storage temperature

Pickup

Lens

: F 1.8, f = 3.8 mm to 38 mm, 10:1 power zoom lens

(GR-DVL1020/DVL820)

F 1.8, f = 3.6 mm to 36 mm, 10:1 power zoom lens

(GR-DVL522/DVL322)

Filter diameter

LCD monitor

: ø37 mm

: 3.5" diagonally measured, LCD panel/TFT active matrix system

(GR-DVL1020)

2.5" diagonally measured, LCD panel/TFT active matrix system

(GR-DVL820/DVL522/DVL322)

Viewfinder

Speaker

: Electronic viewfinder with 0.44" colour LCD

(GR-DVL1020)

Electronic viewfinder with 0.24" black/white LCD

(GR-DVL820/DVL522/DVL322)

: Monaural

Digital Video Camera

Format

Signal format

: DV format (SD mode)

: PAL standard

Recording/Playback format

: Video: Digital component recording

: Audio: PCM digital recording, 32 kHz 4-channel (12-bit),

48 kHz 2-channel (16-bit)

Cassette

: Mini DV cassette

Tape speed

: SP: 18.8 mm/s

LP: 12.5 mm/s

Maximum recording time

(using 80 min. cassette)

: SP: 80 min.

LP: 120 min.

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 79

Digital Still Camera Function (GR-DVL1020/DVL820/DVL522 only)

Storage media

: SD Memory Card/MultiMediaCard

Compression system

: Still image : JPEG (compatible)

Moving image* : MPEG4 (compatible)

File size

: 3 modes (1280 X 960 pixels*, 1024 x 768 pixels, 640 x 480 pixels)

Picture quality

: 2 modes (FINE/STANDARD)

Approximate number of

storable images

: ੬ pg. 27.

* GR-DVL1020/DVL820 only.

Connectors

S-Video

Output

: Y:1 V (p-p), 75 Ω, analogue

C:0.29 V (p-p), 75 Ω, analogue

: Y:0.8 V (p-p) – 1.2 V (p-p), 75 Ω, analogue

C:0.2 V (p-p) – 0.4 V (p-p), 75 Ω, analogue

Input (GR-DVL1020/DVL820 only)

Video output

: 1 V (p-p), 75 Ω, analogue

Video input (GR-DVL1020/DVL820 only) : 0.8 V (p-p) – 1.2 V (p-p), 75 Ω, analogue

Audio output : 300 mV (rms), 1 kΩ, analogue, stereo

Audio input (GR-DVL1020/DVL820 only) : 300 mV (rms), 50 kΩ, analogue, stereo

Output

Input

: 4-pin, IEEE 1394 compliant

USB (GR-DVL1020/DVL820/DVL522 only) : 5-pin

PC (GR-DVL322 only)

: ø2.5 mm, 3-pole

EDIT (GR-DVL1020/DVL820/DVL522 only) : ø3.5 mm, 2-pole

JLIP (GR-DVL322 only)

: ø3.5 mm, 4-pole

AC Adapter

Power requirement

Output

: AC 110 V to 240 V`, 50 Hz/60 Hz

: DC 11 V , 1 A

Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications

subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

80EN

INDEX Controls, Connectors And Indicators

2 3 4 5 o

w e

R T

0 ! @ #

MANUAL

AUTO

OFF

PLAY

^ & * t

s d f

( ) q y u

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 81

Controls

Connectors

1 OPEN/EJECT Switch ............................ ੬ pg. 12

The connectors w to r are located beneath a cover.

2 • Stop Button [5] .................................... ੬ pg. 21

• BACKLIGHT Button ............................. ੬ pg. 44

w Audio/Video Input (GR-DVL1020/DVL820 only)/

Output Connector [AV] ............... ੬ pg. 22, 52, 59

3 • Rewind Button [2] ............................. ੬ pg. 21

• NIGHT Button ...................................... ੬ pg. 38

e • J Terminal [JLIP (Joint Level Interface Protocol)]

(GR-DVL322 only) ............................... ੬ pg. 59

You can also connect to a JLIP-compatible

camcorder or VCR to control it from the

computer using the optional Software

HS-V16KITE.

4 Play/Pause Button [4/6] ....................... ੬ pg. 21

5 Fast-Forward Button [3] ..................... ੬ pg. 21

6 Monitor Open Button [PUSH OPEN] ..... ੬ pg. 16

7 Dioptre Adjustment Control.................... ੬ pg. 10

• Edit Connector [EDIT]

(GR-DVL1020/DVL820/DVL522 only) . ੬ pg. 59

8 Battery Release Button

r DC Input Connector ............................. ੬ pg. 8, 9

t Digital Video Connector

[BATT. RELEASE] ................................... ੬ pg. 8

9 Recording Start/Stop Button .................. ੬ pg. 16

[DV IN/OUT] (i.Link*) ....................... ੬ pg. 53, 65

* i.Link refers to the IEEE1394-1995 industry

specification and extensions thereof. The logo

is used for products compliant with the i.Link

standard.

0 • MENU Wheel [+, –, PUSH] .................. ੬ pg. 46

• LCD Monitor BRIGHT (Brightness)

Control [+, –] ........................................ ੬ pg. 16

! Snapshot Button

[SNAPSHOT] ....................... ੬ pg. 26, 27, 32, 42

y S-Video Input (GR-DVL1020/DVL820 only)/

Output Connector [S-VIDEO] .... ੬ pg. 22, 52, 59

@ • Power Zoom Lever [T/W]..................... ੬ pg. 18

• Speaker Volume Control [VOL.] .......... ੬ pg. 21

# • FOCUS Button..................................... ੬ pg. 43

• BLANK Button ..................................... ੬ pg. 24

u • PC Connector

(GR-DVL322 only) ............................... ੬ pg. 65

• USB (Universal Serial Bus) Connector

(GR-DVL1020/DVL820/DVL522 only)

....................................................... ੬ pg. 65, 66

$ Lock Button............................................ ੬ pg. 17

% Power Switch

AUTO

MANUAL

[

, PLAY, OFF] ................. ੬ pg. 17

Indicators

^ INDEX Button

(GR-DVL1020/DVL820/DVL522 only) ... ੬ pg. 29

i Tally Lamp ....................................... ੬ pg. 16, 48

o CHARGE Lamp ....................................... ੬ pg. 8

& INFO Button

(GR-DVL1020/DVL820/DVL522 only) ... ੬ pg. 29

p Side LED Indicator

* VIDEO/MEMORY Switch [VIDEO, MEMORY]

(GR-DVL1020/DVL820/DVL522 only) ... ੬ pg. 17

(GR-DVL1020/DVL820 only) ................. ੬ pg. 49

Q Power Lamp .................................... ੬ pg. 16, 17

( E-MAIL Button

(GR-DVL1020/DVL820 only) ................. ੬ pg. 33

Other Parts

) SELECT Button

W • Remote Sensor.................................... ੬ pg. 54

• Camera Sensor

(GR-DVL1020/DVL820 only) ................. ੬ pg. 28

q Video Light Switch

Be careful not to cover this area, a sensor

necessary for shooting is built-in here.

[LIGHT OFF/AUTO/ON]......................... ੬ pg. 19

E Viewfinder .............................................. ੬ pg. 10

R Video Light ............................................. ੬ pg. 19

T Stereo Microphone ................................ ੬ pg. 63

Y Viewfinder Cleaning Hatch .................... ੬ pg. 74

U Shoulder Strap Eyelets .......................... ੬ pg. 10

I Grip Strap .............................................. ੬ pg. 10

O LCD Monitor .................................... ੬ pg. 16, 17

P Speaker ................................................. ੬ pg. 21

a Battery Pack Mount ................................. ੬ pg. 8

s Stud Hole ............................................... ੬ pg. 10

d Tripod Mounting Socket ......................... ੬ pg. 10

f MEMORY CARD Cover

(GR-DVL1020/DVL820/DVL522 only) ... ੬ pg. 14

Download from Www.Somanuals.com. All Manuals Search And Download.

82EN

INDEX Indications

LCD Monitor/Viewfinder Indications During Tape Recording Only

1 Displays the selected Fade/Wipe effect.

(੬ pg. 40, 41)

3 4 5 6

2 Appears when in the Squeeze or Cinema mode.

(੬ pg. 48)

3 Rotates while the tape is running.

4 Displays the recording mode (SP or LP).

(੬ pg. 13)

(੬ pg. 16)

LP 50min

REC

5 Displays the tape remaining time.

6 • “REC” appears during recording.

• “PAUSE” appears during Record-Standby

mode.

(੬ pg. 16)

7 Appears when the wind cut mode is engaged to

cut down on noise created by wind. (੬ pg. 48)

SOUND 12B I T

15 : 55

8 Appears when the Insert Editing (w) or Insert

Editing Pause (6w) mode is engaged.(੬ pg. 64)

9 Displays the sound mode for approx. 5 seconds

after turning on the camcorder.

(੬ pg. 47)

8 7

0 Displays the Time Code.

(੬ pg. 20, 49)

LCD Monitor/Viewfinder Indications During Memory Card Recording Only

(GR-DVL1020/DVL820/DVL522 only)

1 Displays the image size.

(੬ pg. 14)

2 Appears and blinks during shooting. (੬ pg. 26)

3 • Appears during shooting.

• Blinks when a memory card is not loaded.

(੬ pg. 26)

2 3 4 5

1024

4 Displays the picture quality.

There are 2 modes available: F (Fine) and

S (Standard) (in order of quality).

5 Displays the remaining number of shots that can

be stored. (੬ pg. 26)

(੬ pg. 14)

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 83

LCD Monitor/Viewfinder Indications During Both Tape And Memory Card

Recording

8 9

40x W

PHOTO

BR I GHT

1 0 . 01 . 02

10 : 0 0

AUTO

1 Appears when the Power Switch is set to “

”.

6 Appears when the iris is locked.

(੬ pg. 44)

(੬ pg. 17)

7 Appears when Digital Image Stabiliser (“DIS”) is

2 •

: Appears when Night-Scope is engaged.

(੬ pg. 38)

: Appears when “GAIN UP” is set to

“AUTO” and the shutter speed is being

engaged. (੬ pg. 47)

8 Approximate zoom ratio: Appears during

•

zooming.

(੬ pg. 18)

9 Appears during zooming.

automatically adjusted.

3 Appears when the white balance is adjusted.

(੬ pg. 45)

(੬ pg. 47)

Zoom level indicator

(੬ pg. 18)

0 Appears when taking a Snapshot. (੬ pg. 26, 42)

! Displays the brightness of the LCD monitor.

4 • “ؓ” : Appears when the exposure is adjusted.

(੬ pg. 16)

(੬ pg. 44)

•

: Appears when backlight compensation is

used. (੬ pg. 44)

5 Displays the selected Programme AE with special

effects. (੬ pg. 38)

@ Displays the date/time.

# Appears when the focus is adjusted manually.

(੬ pg. 43)

(੬ pg. 11)

Download from Www.Somanuals.com. All Manuals Search And Download.

84EN

INDEX Indications (cont.)

LCD Monitor/Viewfinder Indications During Tape Playback

1 Displays the sound mode.

2 Displays the Blank Search mode.

3 Displays the tape speed.

(੬ pg. 50, 51)

(੬ pg. 24)

(੬ pg. 13)

4 Appears while a tape is running.

12B I T

SOUND

: Playback

: Fast-Forward/Shuttle search

: Rewind/Shuttle search

: Pause

: Forward slow-motion

: Reverse slow-motion

: Audio Dubbing

BLANK SEARCH

VOLUME

6e : Audio Dubbing Pause

5 Displays the date/time.

(੬ pg. 50, 51)

2 5 . 12 . 02

10 : 0 0

6 • BRIGHT : Displays the brightness of the LCD

monitor. (੬ pg. 16)

• VOLUME : Displays the speaker volume.

(੬ pg. 21)

116 : 21 : 25

The level indicator moves.

7 Displays the time code.

(੬ pg. 50, 51)

LCD Monitor/Viewfinder Indications During Memory Card Playback

(GR-DVL1020/DVL820/DVL522 only)

1 Displays the operation mode.

2 Displays the brightness of the LCD monitor.

(੬ pg. 29)

(੬ pg. 16)

The level indicator moves.

BR I GHT

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 85

Warning Indications

Indications

Function

Displays the battery remaining power.

Remaining power level: high

Remaining power level: exhausted

As the battery power comes close to nil, the battery indicator

blinks.

When the battery power is exhausted, power turns off automatically.

Appears when no tape is loaded.

(੬ pg. 12)

Appears when the erase protection tab is set to “SAVE” while the Power Switch

CHECK TAPE’S ERASE

PROTECTION TAB

MANUAL

AUTO

is set to “

” or “

” and the VIDEO/MEMORY Switch (GR-DVL1020/

pg. 12)

DVL820/DVL522 only) is set to “VIDEO”.

(੬

Appears if dirt is detected on the heads during recording or playback.

Use an optional cleaning cassette. (੬ pg. 76)

HEAD CLEANING

REQUIRED USE

CLEANING CASSETTE

Appears if condensation occurs. When this indication is displayed, wait more

than 1 hour until condensation disappears.

CONDENSATION

OPERATION PAUSED

PLEASE WAIT

Appears if a tape is not loaded when the Recording Start/Stop Button or

AUTO

SNAPSHOT Button is pressed while the Power Switch is set to “

“

” or

TAPE!

MANUAL

” and the VIDEO/MEMORY Switch (GR-DVL1020/DVL820/DVL522

only) is set to “VIDEO”.

TAPE END

Appears when the tape ends during recording or playback.

(੬ pg. 68)

Appears if a tape in another format is loaded when the VIDEO/MEMORY Switch

(GR-DVL1020/DVL820/DVL522 only) is set to “VIDEO”.

DIFFERENT

FORMATTED TAPE

● Appears when the date/time is not set.

● Appears when the built-in clock battery runs out and the previously set

(੬ pg. 11)

SET DATE/TIME!

date/time is erased. Consult your nearest JVC dealer for replacement.

LENS CAP

Appears for 5 seconds after power is turned on if the lens cap is attached.

LENS COVER

Appears if Audio Dubbing is attempted on a blank portion of a tape.

A. DUB ERROR!

(੬ pg. 63)

● Appears if Audio Dubbing is attempted on a tape recorded in the LP mode.

(੬ pg. 63)

A. DUB ERROR!

<CANNOT DUB

ON A LP RECORDED TAPE>

<CANNOT DUB

ON A 16BIT

RECORDING>

<CHECK TAPE’S ERASE

PROTECTION TAB>

● Appears if Audio Dubbing is attempted on a tape recorded in 16-bit audio.

(੬ pg. 63)

● Appears if A. DUB (e) on the remote control is pressed when the erase

protection tab is set to “SAVE”.

(੬ pg. 63)

CONTINUED ON NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

86EN

INDEX Indications (cont.)

Indications

Function

Appears if Insert Editing is attempted on a blank portion of a tape.

(੬ pg. 64)

INSERT ERROR!

● Appears if Insert Editing is attempted on a tape recorded in the LP mode.

(੬ pg. 64)

INSERT ERROR!

<CANNOT EDIT

ON A LP RECORDED TAPE>

<CHECK TAPE’S ERASE

PROTECTION TAB>

● Appears if INSERT (w) on the remote control is pressed when the erase

protection tab is set to “SAVE”.

(੬ pg. 64)

Appears when the memory card’s memory is full and shooting is not

possible.

MEMORY IS FULL

COPYING FAILED

● Appears if dubbing of copyguarded signals is attempted while this

camcorder is being used as a recorder.

● Appears in the following cases when dubbing from a tape to a memory

card:

– when no memory card is loaded.

– when the memory card's memory is full.

– when the memory card is not formatted.

(੬ pg. 32, 33)

MEMORY CARD!

PLEASE INSERT CARD

Appears if there is no memory card loaded when you attempt to record on a

memory card or access data on a memory card.

Appears when there is a problem with a memory card and its memory is

corrupt, or it has not been initialised. Initialise the memory card. (੬ pg. 36)

PLEASE

FORMAT

Appears if there are no image files stored on the memory card when you

attempt memory card playback.

NO IMAGES STORED

Appears if there are no E-Mail Clip files stored on the memory card when you

NO E-MAIL CLIP STORED

attempt memory card playback.

(੬ pg. 33)

Appears when the camcorder does not recognize the loaded memory card.

Remove the memory card once and insert it again. Repeat these procedures

until no indication appears. If the indication still appears, the memory card is

corrupted.

CARD ERROR!

UNSUPPORTED FILES

Appears if a file in another format is selected.

● Appears when you attempt to record on a copy-protected SD Memory Card.

● Appears when you attempt Memory Card menu operation with a copy-

protected SD Memory Card loaded.

CHECK CARD’S WRITE

PROTECTION SWITCH

The error indications (E01, E02 or E06) show what type of malfunction has

occured. When an error indication appears, the camcorder turns off automati-

cally. Remove the power supply (battery, etc.) and wait a few minutes for the

indication to clear. When it does, you can resume using the camcorder. If the

indication remains, consult your nearest JVC dealer.

E01, E02 or E06

UNIT IN SAFEGUARD

MODE REMOVE AND

REATTACH BATTERY

The error indications (E03 or E04) show what type of malfunction has

occured. When an error indication appears, the camcorder turns off

automatically. Eject the cassette once and re-insert it, then check if the

indication clears. When it does, you can resume using the camcorder. If the

indication remains, consult your nearest JVC dealer.

E03 or E04

UNIT IN SAFEGUARD

MODE EJECT AND

REINSERT TAPE

Download from Www.Somanuals.com. All Manuals Search And Download.

EN 87

Terms

AC Adapter................................................ ੬ pg. 8, 9

Audio Dubbing ............................................ ੬ pg. 63

Auto Date .................................................... ੬ pg. 49

Auto Focus .................................................. ੬ pg. 43

Auto Playback ............................................. ੬ pg. 28

Auto Shut off ................................... ੬ pg. 16, 21, 27

Icons ................................................... ੬ pg. 47 – 49

Index Playback............................................ ੬ pg. 29

Index Screen ............................................... ੬ pg. 29

Initialise A Memory Card ............................. ੬ pg. 36

Insert Editing ............................................... ੬ pg. 64

Iris ............................................................... ੬ pg. 44

Iris Lock ....................................................... ੬ pg. 44

Backlight Compensation ............................. ੬ pg. 44

Battery Low ................................................. ੬ pg. 85

Battery Pack ........................................ ੬ pg. 8, 9, 75

Beep............................................................ ੬ pg. 48

Blank Search............................................... ੬ pg. 24

Brighten The LCD Monitor .......................... ੬ pg. 16

Journalistic Shooting ................................... ੬ pg. 17

LCD monitor/Viewfinder Indications .... ੬ pg. 82 – 86

Load A Tape ................................................ ੬ pg. 12

Manual Focus ............................................. ੬ pg. 43

Memory Card ........................................ ੬ pg. 14, 76

Menu Screen, CAMERA ............................. ੬ pg. 47

Menu Screen, DISPLAY ........................ ੬ pg. 49, 50

Menu Screen, DSC ............................... ੬ pg. 14, 49

Menu Screen, MANUAL........................ ੬ pg. 47, 48

Menu Screen, SYSTEM ...................... ੬ pg. 48 – 50

Menu Screen, VIDEO ................................. ੬ pg. 50

Monotone .................................................... ੬ pg. 39

Motor Drive Mode ....................................... ੬ pg. 42

MultiMediaCard ..................................... ੬ pg. 14, 76

Channels (Left/Right) .................................. ੬ pg. 51

Charge The Battery Pack .............................. ੬ pg. 8

Cinema ........................................................ ੬ pg. 48

Classic Film................................................. ੬ pg. 39

Clean The Camcorder ................................. ੬ pg. 74

Connections .......... ੬ pg. 8, 9, 22, 23, 52, 59, 65, 66

Darken The LCD Monitor ............................ ੬ pg. 16

Date/Time Display ............................... ੬ pg. 49 – 51

Date/Time Settings...................................... ੬ pg. 11

Deleting Files .............................................. ੬ pg. 31

Demonstration Mode ............................... ੬ pg. 6, 49

Digital Zoom .......................................... ੬ pg. 18, 47

DIS (Digital Image Stabiliser) ...................... ੬ pg. 47

Dioptre Adjustment...................................... ੬ pg. 10

DPOF (Digital Print Order Format) .............. ੬ pg. 34

Dubbing................................................. ੬ pg. 52, 53

Night-Scope ................................................ ੬ pg. 38

Picture Quality/Image Size.......................... ੬ pg. 14

Playback Special Effects ............................. ੬ pg. 56

Playback Zoom ........................................... ੬ pg. 57

Power Switch Position ................................ ੬ pg. 17

Programme AE With Special Effects ..... ੬ pg. 38, 39

Protecting Files ........................................... ੬ pg. 30

Provided Accessories .................................... ੬ pg. 5

E-Mail Clip Recording ................................. ੬ pg. 33

Erase Protection ......................................... ੬ pg. 12

Exposure Control ........................................ ੬ pg. 44

Random Assemble Editing .................. ੬ pg. 58 – 62

Record-Standby .......................................... ੬ pg. 16

Recording Mode.......................................... ੬ pg. 13

Remote Control ........................................... ੬ pg. 54

Reset........................................................... ੬ pg. 49

Rewind The Tape ........................................ ੬ pg. 21

Fade-In/Out ........................................... ੬ pg. 40, 41

Fast-Forward The Tape ............................... ੬ pg. 21

Frame-By-Frame Playback ................... ੬ pg. 21, 56

Gain Up ....................................................... ੬ pg. 47

Grip Adjustment .......................................... ੬ pg. 10

CONTINUED ON NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

Indesit Washer WIL103 User Manual
Insignia Fan NS F12R6 22 User Manual
Intellinet Network Solutions Network Router 524537 User Manual
JVC Speaker System CA UXP30 User Manual
JVC Stereo Receiver RX D205S User Manual
Kaito electronic Car Stereo System KA009R User Manual
Kawasaki Saw 840563 User Manual
Kenwood Car Stereo System XR S17P User Manual
Kenwood Mixer FP905 User Manual
KitchenAid Double Oven KEBK276SBL04 User Manual