JVC Digital Camera GR D54 User Manual

Dear Customer,  
Thank you for purchasing this digital  
video camera. Before use, please read  
the safety information and precautions  
contained in the pages 2 – 3 to ensure  
safe use of this product.  
ENGLISH  
DIGITAL VIDEO CAMERA  
GETTING STARTED  
5
11  
18  
31  
43  
GR-D54  
VIDEO RECORDING &  
PLAYBACK  
Please visit our Homepage on the World Wide Web for  
Digital Video Camera:  
For Accessories:  
ADVANCED FEATURES  
REFERENCES  
TERMS  
To deactivate the demonstration, set  
“DEMO MODE” to “OFF”.  
(pg. 18, 20)  
INSTRUCTIONS  
EN  
LYT1259-001A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
EN  
3
Do not point the lens or the viewfinder directly into the sun.  
This can cause eye injuries, as well as lead to the  
malfunctioning of internal circuitry. There is also a risk of  
fire or electric shock.  
CAUTION!  
The following notes concern possible physical damage to  
the camcorder and to the user.  
This camcorder is designed exclusively for the digital video  
cassette. Only cassettes marked  
can be used with  
this unit.  
When carrying, be sure to always securely attach and use  
the provided strap. Carrying or holding the camcorder by  
the viewfinder and/or the LCD monitor can result in  
dropping the unit, or in a malfunction.  
Before recording an important scene…  
make sure you only use cassettes with the Mini DV mark  
.
Take care not to get your finger caught in the cassette  
holder cover. Do not let children operate the camcorder, as  
they are particularly susceptible to this type of injury.  
remember that this camcorder is not compatible with other  
digital video formats.  
remember that this camcorder is intended for private  
consumer use only. Any commercial use without proper  
permission is prohibited. (Even if you record an event such as  
a show, performance or exhibition for personal enjoyment, it  
is strongly recommended that you obtain permission  
beforehand.)  
Do not use a tripod on unsteady or unlevel surfaces. It  
could tip over, causing serious damage to the camcorder.  
CAUTION!  
Connecting cables (Audio/Video, S-Video, etc.) to the  
camcorder and leaving it on top of the TV is not  
recommended, as tripping on the cables will cause the  
camcorder to fall, resulting in damage.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
GETTING STARTED  
4
EN  
Power .............................................................................6  
Recording Menus ........................................................ 19  
Snapshot (For Video Recording) ................................. 24  
Manual Focus .............................................................. 24  
Iris Lock ....................................................................... 25  
Backlight Compensation .............................................. 26  
Dubbing To Or From A Video Unit Equipped With A DV  
Connection To A Personal Computer .......................... 29  
Audio Dubbing ............................................................. 30  
Insert Editing ............................................................... 30  
VIDEO RECORDING & PLAYBACK  
Basic Recording ...........................................................11  
LCD Monitor And Viewfinder ........................................12  
Tape Remaining Time ..................................................12  
Zooming .......................................................................12  
Journalistic Shooting ....................................................13  
Self Recording .............................................................13  
Time Code ...................................................................13  
Recording From The Middle Of A Tape .......................13  
VIDEO PLAYBACK ...........................................................14  
Normal Playback ..........................................................14  
Still Playback ................................................................14  
Shuttle Search .............................................................14  
Blank Search ................................................................14  
Playback Using The Remote Control ...........................15  
Connections To A TV Or VCR .....................................17  
REFERENCES  
31  
ADDITIONAL INFORMATION ........................................... 31  
TROUBLESHOOTING ....................................................... 32  
CAUTIONS ..................................................................... 36  
USER MAINTENANCE ...................................................... 38  
SPECIFICATIONS ............................................................ 39  
INDEX ........................................................................... 40  
TERMS  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED  
How To Attach The Lens Cap  
To protect the lens, attach  
the provided lens cap to  
the camcorder as shown  
in the illustration.  
EN  
5
Provided Accessories  
or  
NOTE:  
To confirm the lens cap is on  
correctly make sure the cap  
is flush to the camcorder.  
Push.  
Place here during  
shooting.  
How To Attach The Shoulder Strap  
Follow the illustration.  
1 Thread the strap through the eyelet.  
2 Fold it back and thread it through the strap guide and  
the buckle.  
To adjust the length of the strap, loosen and then tighten  
the strap in the buckle.  
a AC Adapter AP-V14E or AP-V15E  
b Power Cord  
c Battery Pack BN-V408U-B  
3 Slide the strap guide fully towards the eyelet.  
d Audio/Video Cable (ø3.5 mini-plug to RCA plug)  
e Core Filter (for USB Cable and optional S-Video  
Cable. pg. 6 for attachment)  
Strap guide  
2
f Shoulder Strap (See the right column for attachment)  
g CD-ROM  
h Lens Cap (See the right column for attachment)  
i Remote Control Unit RM-V718U  
j Lithium Battery CR2025* (for remote control unit)  
k USB Cable  
Buckle  
l Cable Adapter  
* A lithium battery is pre-installed in the Remote Control Unit  
at time of shipment (with insulation sheet). To use the  
Remote Control Unit, remove the insulation sheet.  
3
1
NOTES:  
Eyelet  
In order to maintain optimum performance of the  
camcorder, provided cables may be equipped with one or  
more core filter. If a cable has only one core filter, the end  
that is closest to the filter should be connected to the  
camcorder.  
Make sure to use the provided cables for connections. Do  
not use any other cables.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
GETTING STARTED  
6
EN  
How To Attach The Core Filter (for USB Cable and  
optional S-Video Cable)  
Power  
Power Switch  
Attach the core filters to the cables. The core filter  
reduces interference.  
POWER/CHARGE lamp  
Lock Button  
1 Release the stoppers on both ends of the core filter.  
Stopper  
Battery pack  
mount  
2 Run the cable through the core filter, leaving approx.  
3 cm of cable between the cable plug and the core filter.  
Wind the cable once around the outside of the core filter  
as shown in the illustration.  
Arrow  
To DC connector  
Mark  
Wind the cable so that it is not slack.  
3 cm  
Battery pack  
BATT.RELEASE  
AC Adapter  
Power Cord  
Wind once.  
3 Close the core filter until it clicks shut.  
To AC outlet  
This camcorders 2-way power supply system lets you  
choose the most appropriate source of power. Do not use  
provided power supply units with other equipment.  
Charging The Battery Pack  
NOTES:  
Take care not to damage the cable.  
When connecting a cable, attach the end with the core filter  
to the camcorder.  
1 With the arrow on the battery pack pointing upward,  
push the battery pack slightly against the battery pack  
mount a.  
2 Slide up the battery pack until it locks in place b.  
3 Set the Power Switch to OFF (CHARGE).  
4 Connect the AC Adapter to the camcorder, then  
connect the Power Cord to the AC Adapter.  
5 Plug the AC Adapter into an AC outlet. The POWER/  
CHARGE lamp on the camcorder blinks to indicate  
charging has started.  
6 When the POWER/CHARGE lamp goes out, charging  
is finished. Unplug the AC Adapter from the AC outlet.  
Disconnect the AC Adapter from the camcorder.  
To detach the battery pack  
Slide the battery pack down slightly while sliding BATT.  
RELEASE to detach it.  
Battery pack  
BN-V408U*  
Charging time  
Approx. 1 hr. 30 min.  
Approx. 3 hr.  
BN-V416U  
BN-V428U  
* Provided  
NOTES:  
Approx. 5 hr.  
If the protective cap is attached to the battery pack, remove  
it first.  
During charging, the camcorder cannot be operated.  
Charging is not possible if the wrong type of battery is used.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
GETTING STARTED  
EN  
7
When charging the battery pack for the first time or after a  
long storage period, the POWER/CHARGE lamp may not  
light. In this case, remove the battery pack from the  
camcorder, then try charging again.  
If the battery operation time remains extremely short even  
after having been fully charged, the battery is worn out and  
needs to be replaced. Please purchase a new one.  
For other notes, pg. 31.  
The Benefits Of  
Lithium-Ion Batteries  
Lithium-ion battery packs  
are small but have a large  
power capacity. However,  
when one is exposed to  
cold temperatures (below  
10°C), its usage time  
becomes shorter and it  
may cease to function. If  
this happens, place the  
battery pack in your pocket  
or other warm, protected  
place for a short time, then  
re-attach it to the camcorder. As long as the battery pack  
itself is not cold, it should not affect performance.  
(If youre using a heating pad, make sure the battery pack  
does not come in direct contact with it.)  
Using The Battery Pack  
Perform steps 1 2 in Charging The Battery Pack.  
Lithium-ion is vulnerable in  
colder temperatures.  
Maximum continuous recording time  
Battery pack  
BN-V408U*  
BN-V416U  
LCD monitor on  
1 hr. 10 min.  
Viewfinder on  
1 hr. 40 min.  
2 hr. 20 min.  
3 hr. 15 min.  
5 hr. 50 min.  
BN-V428U  
4 hr. 10 min.  
For other notes, pg. 31.  
* Provided  
NOTES:  
Grip Adjustment  
Recording time is reduced significantly under the following  
conditions:  
1 Adjust the velcro strip.  
Zoom or Record-Standby mode is engaged repeatedly.  
The LCD monitor is used repeatedly.  
The playback mode is engaged repeatedly.  
The White LED Light is used.  
Before extended use, it is recommended that you prepare  
enough battery packs to cover 3 times the planned  
shooting time.  
2 Pass your right hand through the loop and grasp the  
grip.  
3 Adjust your thumb and fingers through the grip to  
easily operate the Recording Start/Stop Button, Power  
Switch and Power Zoom Lever. Be sure to fasten the  
velcro strip to your preference.  
ATTENTION:  
Before detaching the power source, make sure that the  
camcorders power is turned off. Failure to do so can result in  
a camcorder malfunction.  
Using AC Power  
Connect the AC Adapter to the camcorder, then connect  
the Power Cord to the AC Adapter as shown in the  
illustration on page 6.  
NOTES:  
The provided AC Adapter features automatic voltage  
selection in the AC range from 110 V to 240 V.  
Do not allow the DC terminals of the AC Adapter to come in  
contact with metals, as this can result in a short circuit and  
cause malfunction.  
For other notes, pg. 31.  
About Batteries  
DANGER! Do not attempt to take the batteries apart, or  
expose them to flame or excessive heat, as it may cause  
a fire or explosion.  
WARNING! Do not allow the battery or its terminals to  
come in contact with metals, as this can result in a short  
circuit and possibly start a fire.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
GETTING STARTED  
8
EN  
Power-Linked Operation  
When the Power Switch is set to Aor M, you can also  
turn on/off the camcorder by opening/closing the LCD  
monitor or pulling out/pushing in the viewfinder.  
Operation Mode  
To turn on the camcorder, set the Power Switch to any  
operation mode except OFF (CHARGE)while pressing  
down the Lock Button located on the switch.  
INFORMATION:  
POWER/CHARGE lamp  
The following explanations in this manual supposes the  
use of LCD monitor in your operation. If you want to use  
the viewfinder, close the LCD monitor and pull out the  
viewfinder fully.  
Power Switch  
Lock Button  
Date/Time Settings  
MMENU/VOL.  
The date/time is recorded onto the tape at all times, but  
its display can be turned on or off during playback.  
(pg. 18, 21)  
1 Set the Power Switch to Mwhile pressing down the  
Lock Button located on the switch.  
2 Open the LCD monitor fully. (pg. 12)  
Choose the appropriate operation mode according to  
your preference using the Power Switch.  
3 Press the MMENU/VOL. Wheel in. The Menu Screen  
appears.  
Power Switch Position  
CAMERA DISPLAY  
4 Rotate the MMENU/VOL.  
BR I GHT  
Wheel to select n, and press it.  
ON SCREEN  
DATE / T I ME  
T I ME CODE  
CLOCK  
LCD / TV  
AUTO  
OFF  
2 0 . 1 2  
1 7  
A (Full Auto Recording):  
The CAMERA DISPLAY Menu  
appears.  
Allows you to record using NO special effects or  
manual adjustments. Suitable for standard recording.  
The Aindicator appears on the display.  
.
0 4  
3 0  
ADJ .  
:
5 Rotate the MMENU/VOL.  
Wheel to select CLOCK ADJ.,  
and press it. The parameter for  
Dayis highlighted.  
RETURN  
M (Manual Recording):  
Allows you to set various recording functions using the  
Menus. (pg. 18)  
If you want more creative capabilities than Full Auto  
Recording, try this mode.  
There is no indication on the display.  
CAMERA DISPLAY  
6 Rotate the MMENU/VOL.  
Wheel to input the day, and press  
it. Repeat to input the month, year,  
hour and minute.  
CLOCK  
ADJ .  
2 0 . 1 2  
.
0 4  
1 7 : 3 0  
OFF:  
7 Rotate the MMENU/VOL.  
Allows you to switch off the camcorder.  
Wheel to select BRETURN, and  
press it twice. The Menu Screen closes.  
PLAY:  
Allows you to play back a recording on the tape.  
Allows you to set various playback functions using  
the Menus. (pg. 18)  
NOTE:  
Even if you select CLOCK ADJ., if the parameter is not  
highlighted, the camcorders internal clock continues to  
operate. Once you move the highlight bar to the first date/  
time parameter (day), the clock stops. When you finish  
setting the minute and press the MMENU/VOL. Wheel in, the  
date and time begin operation from the date and time you  
have just set.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
GETTING STARTED  
EN  
9
Viewfinder Adjustment  
Brightness Adjustment Of The Display  
1 Set the Power Switch to Aor Mwhile pressing  
1 Set the Power Switch to M”  
MMENU/VOL.  
down the Lock Button located on the switch.  
or PLAYwhile pressing down  
the Lock Button located on the  
switch.  
2 Make sure the LCD monitor is closed and locked. Pull  
out the viewfinder fully and adjust it manually for best  
viewability.  
2 Open the LCD monitor fully.  
(pg. 12)  
3 Turn the Dioptre Adjustment Control until the  
indications in the viewfinder are clearly focused.  
3 Press the MMENU/VOL.  
Wheel in. The Menu Screen  
appears.  
4 Rotate the MMENU/VOL.  
Wheel to select n, and  
press it. The CAMERA  
DISPLAY Menu appears.  
BRIGHT  
5 Rotate the MMENU/VOL.  
Wheel to select BRIGHT, and press it. The Menu  
Screen closes and the brightness control indicator  
appears.  
PAUSE  
6 Rotate the MMENU/VOL. Wheel until the appropriate  
brightness is reached.  
7 Press the MMENU/VOL. Wheel in.  
Dioptre Adjustment Control  
It is also possible to adjust the brightness of the viewfinder  
by pulling out the viewfinder, setting PRIORITYin the  
SYSTEM Menu to FINDER(pg. 18, 20) and adjusting  
as described above.  
CAUTION:  
When retracting the viewfinder, take care not to pinch your  
fingers.  
Tripod Mounting  
To attach the camcorder to a  
tripod, align the direction stud  
and screw to the mounting  
socket and stud hole on the  
camcorder. Then tighten the  
screw clockwise.  
Some tripods are not  
equipped with studs.  
CAUTION:  
When attaching the camcorder  
to a tripod, extend its legs to  
stabilise the camcorder. It is not advised to use small sized  
tripods. This may cause damage to the unit by falling over.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
EN GETTING STARTED  
10  
Approximate recording time  
Loading/Unloading A Cassette  
The camcorder needs to be powered up to load or eject a  
Recording mode  
Tape  
30 min.  
SP  
LP  
cassette.  
30 min.  
60 min.  
80 min.  
45 min.  
90 min.  
OPEN/EJECT  
60 min.  
80 min.  
120 min.  
Cassette holder  
cover  
To switch the recording mode, refer to pages 18 and 19.  
To protect valuable recordings  
PUSH HERE  
Slide the erase protection tab on the back of the tape in  
the direction of SAVE. This prevents the tape from  
being recorded over. To record on this tape, slide the tab  
back to RECbefore loading it.  
For other notes, pg. 31.  
Make sure the  
window side is facing  
out.  
Cassette holder  
Erase protection tab  
1 Slide and hold OPEN/EJECT in the direction of the  
arrow, then pull the cassette holder cover open until it  
locks. The cassette holder opens automatically.  
Do not touch internal components.  
2 Insert or remove a tape and press PUSH HEREto  
close the cassette holder.  
Be sure to press only the section labelled PUSH HEREto  
close the cassette holder; touching other parts may cause  
your finger to get caught in the cassette holder, resulting in  
injury or product damage.  
Once the cassette holder is closed, it recedes  
automatically. Wait until it recedes completely before  
closing the cassette holder cover.  
When the battery packs charge is low, you may not be able  
to close the cassette holder cover. Do not apply force.  
Replace the battery pack with a fully charged one or use  
AC power before continuing.  
3 Close the cassette holder cover firmly until it locks into  
place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
VIDEO RECORDING EN  
11  
1 Remove the lens cap.  
Basic Recording  
2 Open the LCD monitor fully. (pg. 12)  
3 Set the Power Switch to Aor Mwhile pressing  
NOTE:  
down the Lock Button located on the switch.  
Before continuing, perform the procedures listed below:  
Power (pg. 6)  
The POWER/CHARGE lamp lights and the camcorder  
enters the Record-Standby mode. PAUSEis displayed.  
To record in LP (Long Play) mode, pg. 18, 19.  
Loading a Cassette (pg. 10)  
4 To start recording, press the Recording Start/Stop  
Button. The T RECappears on the display while  
recording is in progress.  
5 To stop recording, press the Recording Start/Stop  
Button again. The camcorder re-enters the Record-  
Standby mode.  
Push.  
NOTES:  
The image will not appear simultaneously on the LCD  
monitor and the viewfinder.  
If the Record-Standby mode continues for 5 minutes, the  
camcorders power shuts off automatically. To turn the  
camcorder on again, push back and pull out the viewfinder  
again or close and re-open the LCD monitor.  
LCD monitor/viewfinder indications:  
POWER/CHARGE lamp  
Power Zoom Lever  
When power is supplied from a battery: the “  
battery indicator is displayed. (pg. 35)  
When power is supplied from an AC outlet: the “  
battery indicator does not appear.  
When a blank portion is left between recorded scenes on  
the tape, the time code is interrupted and errors may occur  
when editing the tape. To avoid this, refer to Recording  
From The Middle Of A Tape(pg. 13).  
To turn the beep sounds off, pg. 18, 20.  
For other notes, pg. 31.  
Power Switch  
Lock Button  
Recording Start/Stop Button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
EN VIDEO RECORDING  
12  
LCD Monitor And Viewfinder  
Zooming  
While using the LCD monitor:  
Produces the zoom in/out effect, or an instantaneous  
change in image magnification.  
Make sure the viewfinder is pushed back in. Press the  
Monitor Opening Button and open the LCD monitor fully.  
It can rotate 270° (90° downward, 180° upward).  
Zoom In  
Slide the Power Zoom Lever towards T.  
While using the viewfinder:  
Make sure the LCD monitor is closed and locked. Pull out  
the viewfinder fully.  
Be sure to pull out the viewfinder until you hear a click,  
otherwise it may be pushed back in during use.  
Zoom Out  
Slide the Power Zoom Lever towards W.  
The further you slide the Power Zoom Lever, the quicker the  
zoom action.  
Zoom in (T: Telephoto)  
1
x
W
T
10  
x
W
T
20  
xW  
T
40  
xW  
T
Zoom out (W: Wide angle)  
Monitor Opening Button  
10  
x
W
T
NOTES:  
The image will not appear simultaneously on the LCD  
monitor and the viewfinder. When the viewfinder is pulled  
out while the LCD monitor is opened, you can select which  
one to use. Set PRIORITYto the desired mode in  
SYSTEM Menu. (pg. 18, 20)  
16X (optical) zoom zone  
Approximate zoom ratio  
Coloured bright spots may appear all over the LCD monitor  
or the viewfinder. However, this is not a malfunction.  
(pg. 34)  
NOTES:  
Focusing may become unstable during Zooming. In this  
case, set the zoom while in Record-Standby, lock the focus  
by using the manual focus (pg. 24), then zoom in or out  
in Record mode.  
Zooming is possible to a maximum of 900X, or it can be  
switched to 16X magnification using the optical zoom.  
(pg. 19)  
Zoom magnification of over 16X is done through Digital  
image processing, and is therefore called Digital Zoom.  
During Digital zoom, the quality of image may suffer.  
Macro shooting (as close as approx. 5 cm to the subject) is  
possible when the Power Zoom Lever is set all the way to  
W. Also see TELE MACROin MANUAL Menu on page  
19.  
Tape Remaining Time  
Approximate tape remaining time appears on the display.  
“– h – – mmeans the camcorder is calculating the  
remaining time. When the remaining time reaches  
2 minutes, the indication starts blinking.  
0
h
25  
m
hm  
(Now calculating)  
1h 0m  
0h59m  
0h 1m  
0h 3m  
0h 0m  
0h 2m  
(Blinking)  
(Blinking)  
(Blinking)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
VIDEO RECORDING EN  
13  
Journalistic Shooting  
Recording From The Middle Of A Tape  
In some situations, different  
shooting angles may provide  
more dramatic results. Hold the  
camcorder in the desired position  
and tilt the LCD monitor in the  
most convenient direction. It can  
rotate 270° (90° downward, 180°  
upward).  
1) Play back a tape or use Blank Search (pg. 14) to  
find the spot at which you want to start recording, then  
engage the Still Playback mode. (pg. 14)  
2) Set the Power Switch to Aor Mwhile pressing  
down the Lock Button located on the switch, then start  
recording.  
NOTES:  
The time code cannot be reset.  
During fast-forwarding and rewinding, the time code  
indication does not move smoothly.  
The time code is displayed only when TIME CODEis set  
to ON. (pg. 20)  
Self Recording  
Open the LCD monitor and tilt  
it upward to 180° so that it  
faces forward, then point the  
lens toward yourself and start  
recording.  
When a blank portion is recorded on a tape  
Time code  
00:00:00  
Time code Time code  
05:43:21 00:00:00  
Self Recording  
Time Code  
During recording, a time code is recorded on the tape.  
This code is to confirm the location of the recorded scene  
on the tape during playback.  
Already  
recorded scene  
Newlyrecorded  
scene  
Blank  
Tape  
Display  
Shooting start Shooting stop Shooting start  
point  
point  
point  
Minutes  
Seconds  
(25 frames = 1 second)  
12 : 34 : 24  
Proper recording  
Time code  
00:00:00  
Time code Time code  
05:43:21 05:44:00  
* Frames are not displayed during recording.  
If recording starts from a blank portion, the time code  
begins counting from 00:00:00(minute:second:frame).  
If recording starts from the end of a previously recorded  
scene, the time code continues from the last time code  
number.  
Already  
recorded scene  
New  
Tape  
Latest scene  
scene  
If during recording a blank portion is left partway through  
the tape, the time code is interrupted. When recording is  
resumed, the time code starts counting up again from  
00:00:00. This means the camcorder may record the  
same time codes as those existing in a previously  
recorded scene. To prevent this, perform Recording  
From The Middle Of A Tape(See the right column) in the  
following cases;  
Shooting start Shooting start Shooting start  
point point point  
When shooting again after playing back a recorded tape.  
When power shuts off during shooting.  
When a tape is removed and re-inserted during shooting.  
When shooting using a partially recorded tape.  
When shooting on a blank portion located partway through  
the tape.  
When shooting again after shooting a scene then opening/  
closing the cassette holder cover.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
EN VIDEO PLAYBACK  
14  
Shuttle Search  
MMENU/VOL.  
BLANK SEARCH  
Allows high-speed search in either direction during video  
playback.  
1) During playback, press 5 for forward search, or  
3 for reverse search.  
2) To resume normal playback, press 4/9.  
During playback, press and hold 5 or 3. The search  
continues as long as you hold the button. Once you release  
the button, normal playback resumes.  
A slight mosaic effect appears on the display during Shuttle  
Search. This is not a malfunction.  
ATTENTION:  
During Shuttle Search, parts of the  
picture may not be clearly visible,  
particularly on the left side of the  
screen.  
Power Switch  
Lock Button  
8
4/9  
Blank Search  
Helps you find where you should start recording in the  
middle of a tape to avoid time code interruption.  
(pg. 13)  
1 Load a cassette. (pg. 10)  
2 Set the Power Switch to PLAYwhile pressing down  
the Lock Button located on the switch.  
3 During Stop mode, press BLANK SEARCH.  
The BLANK SEARCHindication appears and the  
camcorder automatically starts reverse or forward search,  
then stops at the spot which is about 3 seconds of tape  
before the beginning of the detected blank portion.  
To cancel Blank Search midway, press 8.  
3
5
Speaker  
NOTES:  
Before starting Blank Search, if the current position is at a  
blank portion, the camcorder searches in the reverse  
direction. If the current position is at a recorded portion, the  
camcorder searches in the forward direction.  
Blank Search does not work if USE CLEANING  
CASSETTEhas appeared with the tape.  
Normal Playback  
1 Load a cassette. (pg. 10)  
2 Set the Power Switch to PLAYwhile pressing down  
the Lock Button located on the switch.  
If the beginning or end of the tape is reached during Blank  
Search, the camcorder stops automatically.  
A blank portion which is shorter than 5 seconds of tape  
may not be detected.  
The detected blank portion may be located between  
recorded scenes. Before you start recording, make sure  
there is no recorded scene after the blank portion.  
3 To start playback, press 4/9.  
4 To stop playback, press 8.  
During Stop mode, press 3 to rewind, or 5 to fast-  
forward the tape.  
To control the speaker volume  
Rotate the MMENU/VOL. Wheel towards +to turn up  
the volume, or towards “–” to turn down the volume.  
NOTES:  
The playback picture can be viewed in the LCD monitor,  
viewfinder or on a connected TV. (pg. 17)  
For other notes, pg. 31.  
Still Playback  
Pauses during video playback.  
1) Press 4/9 during playback.  
2) To resume normal playback, press 4/9 again.  
If still playback continues for more than about 3 minutes,  
the camcorders Stop mode is automatically engaged.  
When 4/9 is pressed, the image may not pause  
immediately while the camcorder stabilises the still image.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                           
VIDEO PLAYBACK EN  
15  
Buttons And Functions  
Playback Using The Remote Control  
The Full-Function Remote Control Unit can operate this  
camcorder from a distance as well as the basic  
operations (Playback, Stop, Pause, Fast-Forward and  
Rewind) of your VCR. It also makes additional playback  
functions possible. (pg. 16)  
Installing The Battery  
The remote control uses one  
lithium battery (CR2025).  
1 Pull out the battery holder  
by inserting a pointed  
instrument into the slot.  
2
A Infrared beam transmitting window  
3
1
2 Insert the battery in the  
The following buttons are available only when the  
camcorders Power Switch is set to PLAY.  
holder, and be sure to have  
the +mark visible.  
1
B AUDIO Button ..................................... (pg. 18, 21)  
C PAUSE Button* .......................................... (pg. 16)  
Up Button .................................................. (pg. 16)  
D SLOW Rewind Button................................ (pg. 16)  
E REW Button* ....................................... (pg. 14, 19)  
Left Button ................................................ (pg. 16)  
F INSERT Button .......................................... (pg. 30)  
G STOP Button* ...................................... (pg. 14, 19)  
Down Button ............................................. (pg. 16)  
H SHIFT Button ............................................ (pg. 16)  
I EFFECT ON/OFF Button .......................... (pg. 16)  
J EFFECT Button ........................................ (pg. 16)  
K SLOW Forward Button............................... (pg. 16)  
L FF Button* ........................................... (pg. 14, 19)  
Right Button .............................................. (pg. 16)  
M PLAY Button*....................................... (pg. 14, 19)  
N A. DUB Button ........................................... (pg. 30)  
O DISPLAY Button ................................. (pg. 17, 27)  
3 Slide the holder back in  
Slot  
until you hear a click.  
Beam Effective Area  
(indoor use)  
When using the remote control,  
be sure to point it at the remote  
sensor. The transmitted beams  
approximate effective distance  
for indoor use is 5 m.  
NOTE:  
The transmitted beam may not be  
Remote sensor  
effective or may cause incorrect  
operation when the remote sensor  
is directly exposed to sunlight or  
powerful lighting.  
The following buttons are available when the camcorders  
Power Switch is set to Aor M.  
a S.SHOT (Snapshot) Button*  
b START/STOP Button*  
c Zoom (T/W) Buttons** ........................ (pg. 12, 16)  
*
Functions the same as each corresponding button on the  
camcorder. (pg. 41)  
** Functions when the camcorders Power Switch is set to  
PLAYas well.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
EN VIDEO PLAYBACK  
16  
Playback Zoom  
Magnifies the recorded image up to 56X at any time  
during video playback.  
1) Press PLAY (U) to start video  
playback. Or perform normal playback of  
images.  
Up Button  
or PAUSE  
SLOW Forward  
Button  
SLOW Rewind  
Button  
Left Button  
Right Button  
PLAY  
Down Button  
or STOP  
2) At the point you want to zoom in, press  
the Zoom Button (T).  
To zoom out, press the Zoom Button (W).  
Zoom Buttons  
SHIFT  
Slow-Motion Playback  
Allows slow-speed search in either direction during video  
playback.  
During normal video playback, press SLOW (YI or IU)  
more than approx. 2 seconds.  
After approx. 5 minutes (approx. 20 seconds with an 80-  
minute cassette) in Slow Rewind or approx. 5 minutes in  
Slow Forward, normal playback resumes.  
3) You can move the image on the screen  
around to find a particular portion of the  
picture. While holding down SHIFT, press  
L (Left), F (Right), U (Up) and E (Down).  
To end zoom, press and hold W until  
magnification returns to normal. Or, press STOP (8) and  
then press PLAY (U) during video playback.  
NOTES:  
To pause Slow-Motion playback, press PAUSE (9).  
To stop Slow-Motion playback, press PLAY (U).  
Zoom can also be used during slow-motion and still  
playback.  
Due to digital image processing, the quality of the image  
may suffer.  
NOTES:  
You can also engage Slow-Motion Playback from Still  
Playback by pressing SLOW (YI or IU) more than approx.  
2 seconds.  
Playback Special Effects  
Allows you to add creative effects to the video playback  
image.  
The effects that can be used during playback are  
CLASSIC FILM, MONOTONE, SEPIA and STROBE. The  
effects work the same in playback as they did in  
recording. (pg. 23)  
During Slow-Motion Playback, due to digital image  
processing, the picture may take on a mosaic effect.  
After SLOW (YI or IU) is pressed and held, the still image  
may be displayed for a few seconds, followed by a blue  
screen for a few seconds. This is not a malfunction.  
There may be a small margin between the slow-motion  
playback start point you chose and the actual start point for  
Slow-Motion Playback.  
CLASSIC FILM: Gives recorded scenes a strobe  
effect.  
During Slow-Motion Playback, there will be disturbances in  
video and the picture may seem unstable, especially with  
steady images. This is not a malfunction.  
MONOTONE: Like classic black and white films,  
your footage is shot in B/W. Used together with the  
Cinema mode, it enhances the classic filmeffect.  
SEPIA: Recorded scenes have a brownish tint like  
old photos. Combine this with the Cinema mode for a  
classic look.  
Frame-By-Frame Playback  
Allows frame-by-frame search during video playback.  
During normal or still playback, press SLOW (IU)  
repeatedly for forward or SLOW (YI) repeatedly for  
reverse. Each time SLOW (YI or IU) is pressed, the  
frame is played back.  
STROBE: Your recording looks like a series of  
consecutive snapshots.  
1) To start playback,  
EFFECT  
EFFECT ON/OFF  
press PLAY (U).  
2) Press EFFECT.  
The PLAYBACK  
EFFECT Select Menu  
appears.  
3) Press EFFECT  
repeatedly to move  
the highlight bar to the  
desired effect.  
The selected function is activated and after 2 seconds the  
menu disappears.  
To deactivate the selected effect, press EFFECT ON/OFF.  
To reactivate the selected effect press EFFECT ON/OFF  
again.  
To change the selected effect, repeat from step 2 above.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
VIDEO PLAYBACK EN  
17  
1 Make sure all units are turned off.  
Connections To A TV Or VCR  
These are some basic types of connections. When  
making the connections, refer also to your VCR and TV  
instruction manuals.  
2 Connect the camcorder to a TV or VCR as shown in  
the illustration.  
If using a VCR, go to step 3.  
If not, go to step 4.  
3 Connect the VCR output to the TV input, referring to  
your VCRs instruction manual.  
4 Turn on the camcorder, the VCR and the TV.  
5 Set the VCR to its AUX input mode, and set the TV to  
its VIDEO mode.  
To choose whether or not the following displays  
appear on the connected TV  
Date/Time  
Set DATE/TIMEto AUTO, ONor OFF. (pg. 18, 21)  
Or, press DISPLAY on the remote control to turn on/off the  
date indication.  
To AV  
To S  
Time Code  
Audio/Video  
cable  
(provided)  
S-Video cable  
(optional)  
Set TIME CODEto ONor OFF. (pg. 18, 21)  
Indications other than date/time and time code  
Set ON SCREENto OFF, LCDor LCD/TV.  
(pg. 18, 21)  
NOTES:  
It is recommended to use the AC Adapter as the power  
supply instead of the battery pack. (pg. 7)  
To monitor the picture and sound from the camcorder  
without inserting a tape, set the camcorders Power Switch  
to Aor M, then set your TV to the appropriate input  
mode.  
1
2
3
4
Make sure you adjust the TV sound volume to its minimum  
level to avoid a sudden burst of sound when the camcorder  
is turned on.  
If you have a TV or speakers that are not specially shielded,  
do not place the speakers adjacent to the TV as  
interference will occur in the camcorder playback picture.  
When a cable is connected to the AV connector, the sound  
is not heard from the speaker.  
Cable Adapter*  
Y/C/CVBSVideo  
Out Select Switch  
To TV or VCR  
TV  
VCR  
A White to AUDIO L IN**  
B Red to AUDIO R IN**  
C Yellow to VIDEO IN  
D To S-VIDEO IN***  
*
If your VCR has a SCART connector, use the provided  
cable adapter.  
** Not required for watching still images only.  
*** Connect when your TV/VCR has S-VIDEO IN and A/V  
input connectors. In this case, it is not necessary to  
connect the yellow video cable.  
NOTE:  
Set the video out select switch of the cable adapter as  
required:  
Y/C: When connecting to a TV or VCR which accepts Y/  
C signals and uses an S-Video cable.  
CVBS: When connecting to a TV or VCR which does not  
accept Y/C signals and uses an audio/video cable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
EN MENUS FOR DETAILED ADJUSTMENT  
18  
Menus without Sub Menus  
Changing The Menu Settings  
This camcorder is equipped with an easy-to-use, on-  
screen menu system that simplifies many of the more  
detailed camcorder settings. (pg. 19 – 21)  
v WIPE/FADER (pg. 22)  
r PROGRAM AE (pg. 23)  
p EXPOSURE (pg. 25)  
u W. BALANCE (pg. 26)  
Selected menu icon  
blinks.  
Selected  
parameter  
PROGRAM AE  
1) Rotate the MMENU/VOL.  
Wheel to select the desired  
parameter.  
Example: r PROGRAM AE  
Menu  
SHUTTER  
SPORTS  
MMENU/VOL.  
SPOTLIGHT  
TWILIGHT  
SEPIA  
MONOTONE  
2) Press the MMENU/VOL.  
Wheel in. Selection is complete.  
The Menu Screen returns.  
Repeat the procedure if you wish  
to set other function menus.  
3) Press the MMENU/VOL.  
Wheel in again. The Menu Screen  
closes.  
Power Switch  
Lock Button  
1 For Video Recording Menus:  
Set the Power Switch to “M” while pressing down the  
Lock Button located on the switch.  
m CAMERA (pg. 19)  
q MANUAL (pg. 19)  
s SYSTEM (pg. 20)  
n CAMERA DISPLAY  
(pg. 20)  
Selected menu icon  
blinks.  
For Video Playback Menus:  
Set the Power Switch to “PLAY” while pressing down the  
Lock Button located on the switch.  
Selected function  
CAMERA  
REC MODE  
t VIDEO (pg. 21)  
2 Open the LCD monitor fully. (pg. 12)  
SOUND MODE1 2b i  
t
ZOOM  
SNAP MODE  
GA I N UP  
4 0 x  
n VIDEO DISPLAY (pg. 21)  
1) Rotate the MMENU/VOL.  
Wheel to select the desired  
function, and press it. The Sub  
Menu appears.  
FULL  
AUTO  
3 Press the MMENU/VOL. Wheel in. The Menu Screen  
A
appears.  
4 Rotate the MMENU/VOL. Wheel to select the desired  
function, and press it. The selected function menu  
appears.  
RETURN  
Example: m CAMERA Menu  
2) Rotate the MMENU/VOL.  
Wheel to select the desired  
parameter.  
3) Press the MMENU/VOL.  
Wheel in. Selection is complete.  
Repeat the procedure if you wish  
to set other function menus.  
4) Press the MMENU/VOL.  
Wheel in. The Menu Screen  
returns.  
Repeat the procedure if you wish  
to set other function menus.  
5) Press the MMENU/VOL.  
Wheel in again. The Menu  
Screen closes.  
Sub Menu  
Screen for Video Recording Screen for Video Playback  
CAMERA  
REC MODE  
Menu  
Menu  
WI PE / FADER  
OFF  
FADER–WH I TE  
FADER–BLACK  
FADER–B .W  
WI PE–CORNER  
WI PEWI NDOW  
WI PE–SL I DE  
WI PE–DOOR  
WI PE–SCROLL  
WI PE–SHUTTER  
V I DEO  
SOUND MODESTEREO  
NARRAT I ON  
REC MODE  
OFF  
S / AV I NPUT  
OFF  
RETURN  
RETURN  
CAMERA  
REC MODE  
5 Setting procedure hereafter depends on the selected  
SOUND MODE1 2b i  
t
ZOOM  
4 0 x  
FULL  
AUTO  
function.  
SNAP MODE  
GA I N UP  
A
RETURN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
MENUS FOR DETAILED ADJUSTMENT EN  
19  
GAIN UP  
Recording Menus  
OFF: Allows you to shoot dark scenes with no picture  
brightness adjustment.  
[AGC]: The overall appearance may be grainy, but the  
image is bright.  
CAMERA  
The “m” settings are effective when the Power Switch is  
set to both “A” and “M”. However, the menu settings can  
be changed only when the Power Switch is set to “M”.  
[ ] = Factory-preset  
AUTO  
: The shutter speed is automatically  
adjusted. Shooting a subject in low or poor lighting at  
slow shutter speed provides a brighter image than in the  
AGC mode, but the subject’s movements are not smooth  
or natural. The overall appearance may be grainy. While  
REC MODE  
the shutter speed is being automatically adjusted, “  
is displayed.  
[SP]: To record in the SP (Standard Play) mode  
LP: Long Play—more economical, providing 1.5 times  
the recording time.  
MANUAL  
NOTES:  
The “q” settings are effective only when the Power  
Switch is set to “M”.  
[ ] = Factory-preset  
Audio Dubbing (pg. 30) and Insert Editing (pg. 30) are  
possible on tapes recorded in the SP mode.  
If the recording mode is switched, the playback picture will  
be blurred at the switching point.  
DIS  
It is recommended that tapes recorded in the LP mode on  
this camcorder be played back on this camcorder.  
During playback of a tape recorded on another camcorder,  
blocks of noise may appear or there may be momentary  
pauses in the sound.  
OFF: Disables the function.  
[ON  
]: To compensate for unstable images caused  
by camera-shake, particularly at high magnification.  
NOTES:  
SOUND MODE  
Accurate stabilisation may not be possible if hand shake is  
excessive, or under the following conditions:  
• When shooting subjects with vertical or horizontal stripes.  
• When shooting dark or dim subjects.  
• When shooting subjects with excessive backlighting.  
• When shooting scenes with movement in various  
directions.  
• When shooting scenes with low-contrast backgrounds.  
Switch off this mode when recording with the camcorder on  
a tripod.  
[12 bit]: Enables video recording of stereo sound on four  
separate channels, and is recommended for use when  
performing Audio Dubbing. (Equivalent to the 32 kHz  
mode of previous models)  
16 bit: Enables video recording of stereo sound on two  
separate channels. (Equivalent to the 48 kHz mode of  
previous models)  
ZOOM  
The “  
” indicator blinks or goes out if the Stabiliser  
16X: When set to “16X” while using digital zoom, the  
zoom magnification will reset to 16X since digital zoom  
will be disengaged.  
cannot be used.  
TELE MACRO  
[40X]: Allows you to use the Digital Zoom. By digitally  
processing and magnifying images, zooming is possible  
from 16X (the optical zoom limit), to a maximum of 40X  
digital magnification.  
900X: Allows you to use the Digital Zoom. By digitally  
processing and magnifying images, zooming is possible  
from 16X (the optical zoom limit), to a maximum of 900X  
digital magnification.  
[OFF]: Disables the function.  
ON: Usually the distance to a subject where the lens is in  
focus depends on the zoom magnification. Unless there  
is a distance more than 1 m to the subject, the lens is out  
of focus at the maximum telephoto setting. When set to  
“ON”, you can shoot a subject as large as possible at a  
distance of approx. 60 cm.  
NOTE:  
Depending on the zoom position, the lens may go out of  
focus.  
SNAP MODE  
[FULL]: Snapshot mode with no frame  
PIN-UP: Pin-Up mode  
FRAME: Snapshot mode with frame  
[FULL]  
PIN-UP  
FRAME  
For details on the procedure, refer to “Snapshot (For  
Video Recording)” (pg. 24).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                   
EN MENUS FOR DETAILED ADJUSTMENT  
20  
WIDE MODE  
NOTES:  
If a cassette is in the camcorder, the demonstration cannot  
be turned on.  
[OFF]: Records with no change in the screen ratio. For  
playback on a TV with a normal screen ratio.  
CINEMA : Inserts black bands at the top and bottom of  
the screen. The  
on wide-screen TVs, the black bands at the top and  
bottom of the screen are cut and the screen ratio  
becomes 16:9. When using this mode, refer to your wide-  
screen TV’s instruction manual. During playback/  
recording on 4:3 TVs/LCD monitor/viewfinder, black  
bands are inserted at the top and bottom of the screen  
and the image appears like a letter boxed 16:9 movie.  
SQUEEZE : For playback on TVs with an aspect ratio  
of 16:9. Naturally expands the image to fit the screen  
“DEMO MODE” remains “ON” even if the camcorder power  
is turned off.  
If “DEMO MODE” remains “ON”, some functions will not be  
available. After viewing demo, set to “OFF”.  
indicator appears. During playback  
PRIORITY  
[LCD]: The image is displayed on the LCD monitor when  
the viewfinder is pulled out while the LCD monitor is  
opened.  
FINDER: The image is displayed in the viewfinder when  
the viewfinder is pulled out while the LCD monitor is  
opened.  
without distortion. The  
indicator appears. When using  
this mode, refer to your wide-screen TV’s instruction  
manual. During playback/recording on 4:3 TVs/LCD  
monitor/viewfinder, the image is elongated vertically.  
CAM RESET  
EXECUTE: Resets all settings to the factory-preset.  
RETURN: Does not reset all settings to the factory-  
preset.  
WIND CUT  
[OFF]: Disengages the function.  
CAMERA DISPLAY  
ON  
: Helps cut down on noise created by wind. The  
” indicator appears. The quality of the sound will  
The “n” (CAMERA DISPLAY) settings are effective even  
when the Power Switch is set to “A”. However, the menu  
settings can be changed only when the Power Switch is set  
to “M”.  
The “n” (CAMERA DISPLAY) settings are effective only  
for shooting except “BRIGHT”.  
change. This is normal.  
SYSTEM  
The “s” functions which are set when the Power Switch  
is set to “M” are also applied when the Power Switch is  
set to “PLAY”.  
[ ] = Factory-preset  
[ ] = Factory-preset  
BRIGHT  
pg. 9, “Brightness Adjustment Of The Display”  
BEEP  
OFF: Turns off sounds when performing any operations.  
It also deactivates the shutter sound effect, however the  
shutter sound is recorded onto the tape during Snapshot  
for Video Recording (pg. 24).  
BEEP: The beep sounds when the power is turned on or  
off, and at the beginning and end of recording. It also  
activates the shutter sound effect. (pg. 18, 24)  
[MELODY]: Instead of a beep, a melody sounds when  
any operation is performed. It also activates the shutter  
sound effect. (pg. 18, 24)  
ON SCREEN  
LCD: Keeps the camcorder’s display (except the date,  
time and time code) from appearing on the connected TV  
screen.  
[LCD/TV]: Makes the camcorder’s display appear on  
screen when the camcorder is connected to a TV.  
DATE/TIME  
OFF: The date/time does not appear.  
[AUTO]: Displays the date/time for approx. 5 seconds  
when the Power Switch is set from “OFF” to “A” or “M”.  
ON: The date/time is always displayed.  
REMOTE  
OFF: Disables the remote control operations.  
[ON]: Enables the remote control operations.  
The date indication can also be turned on/off by pressing  
the DISPLAY Button on the remote control. (pg. 17, 27)  
DEMO MODE  
TIME CODE  
OFF: Automatic demonstration will not take place.  
[ON]: Demonstrates certain functions such as Program  
AE with special effects, etc., and can be used to confirm  
how these functions operate. Demonstration starts in the  
following cases:  
[OFF]: Time code is not displayed.  
ON: Time code is displayed on the camcorder and on the  
connected TV. Frame numbers are not displayed during  
recording. (pg. 13)  
When the Menu Screen is closed after “DEMO MODE” is  
turned “ON”.  
CLOCK ADJ.  
pg. 8, “Date/Time Settings”  
With “DEMO MODE” set to “ON”, if there is no operation for  
about 3 minutes after the Power Switch is set to “A” or “M”.  
Performing any operation during the demonstration stops  
the demonstration temporarily. If no operation is  
performed for more than 3 minutes after that, the  
demonstration will resume.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                     
MENUS FOR DETAILED ADJUSTMENT EN  
21  
SYSTEM  
Playback Menus  
Each setting is linked with s, which appears when the  
Power Switch is set to M. (pg. 18)  
The parameters are the same as in the description on  
page 20.  
VIDEO  
[ ] = Factory-preset  
[ ] = Factory-preset  
SOUND MODE and NARRATION  
During tape playback, the camcorder detects the sound  
mode in which the recording was made, and plays the  
sound back. Select the type of sound to accompany your  
playback picture. According to the menu access  
explanation on page 18, select SOUND MODEor  
NARRATIONfrom the Menu Screen and set it to the  
desired parameter.  
BEEP  
OFF / BEEP / [MELODY]  
OFF / [ON]  
REMOTE  
DEMO MODE  
PRIORITY  
CAM RESET  
OFF / [ON]  
[LCD] / FINDER  
EXECUTE / RETURN  
SOUND MODE  
[STEREO  
channels in stereo.  
SOUND L : Sound from the Lchannel is output.  
SOUND R : Sound from the Rchannel is output.  
]: Sound is output on both Land R”  
VIDEO DISPLAY  
The n(VIDEO DISPLAY) settings are effective only for  
video playback except BRIGHT.  
The parameters (except OFFin ON SCREEN settings)  
are the same as in the description on page 20.  
[ ] = Factory-preset  
NARRATION  
[OFF]: Original sound is output on both Land R”  
channels in stereo.  
ON: Dubbed sound is output on both Land R”  
BRIGHT  
pg. 9, Brightness Adjustment Of The Display”  
channels in stereo.  
MIX: Original and dubbed sounds are combined and  
output in stereo on both Land Rchannels.  
ON SCREEN  
When set to OFF, the camcorders display disappears.  
DATE/TIME [OFF] / AUTO / ON  
OFF / [LCD] / LCD/TV  
NOTES:  
You can also use AUDIO button on the provided remote  
control (pg. 15) to change the output sound (without  
having to access the Playback Menu).  
When set to AUTO, the date/time are displayed in the  
following cases:  
When playback starts. The camcorder displays the date/  
time when scenes are recorded.  
The SOUND MODEsetting is available for both 12-bit and  
16-bit sound. (In previous modelsfunctions, 12-bitis  
called 32 kHzand 16-bitis called 48 kHz.)  
The camcorder cannot detect the sound mode in which the  
recording was made during fast-forward or rewind. During  
playback the sound mode is displayed in the upper left  
corner.  
When the date is changed during playback.  
TIME CODE  
[OFF] / ON  
REC MODE  
[SP] / LP  
Allows you to set the video recording mode (SP or LP)  
depending on your preference. It is recommended you  
use REC MODEin VIDEO Menu when using this  
camcorder as a recorder during dubbing. (pg. 27, 28)  
NOTE:  
REC MODEcan be set when the Power Switch is set to  
PLAYor M.  
S/AV INPUT  
[OFF]: Disables audio/video signal input from the AV and  
S-Video connectors. (pg. 27)  
ON: Enables audio/video signal input from the AV and S-  
Video connectors. (pg. 27)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                             
FEATURES FOR RECORDING  
22  
EN  
SNAPSHOT  
Power Switch  
Lock Button  
Night Scope  
Makes dark subjects or areas even brighter than they  
would be under good natural lighting. Although the  
recorded image is not grainy, it may look as if it is  
strobing due to the slow shutter speed.  
Recording Start/Stop Button  
1 Set the Power Switch to Mwhile pressing down the  
Lock Button located on the switch.  
2 Open the LCD monitor fully. (pg. 12)  
3 Press NIGHT so that the Night-Scope indicator “  
appears.  
The shutter speed is automatically adjusted to provide up to  
LIGHT  
30 times sensitivity.  
“ ” appears beside “  
while the shutter speed is being  
automatically adjusted.  
NIGHT  
To deactivate Night-Scope  
Press NIGHT again so that the Night-Scope indicator  
disappears.  
White LED Light  
NOTES:  
During Night-Scope, the following functions or settings  
cannot be activated and its indicator blinks or goes out:  
Some modes of Program AE With Special Effects”  
(pg. 23).  
• “GAIN UPin CAMERA Menu. (pg. 19)  
• “DISin MANUAL Menu. (pg. 19)  
During Night-Scope, it may be difficult to bring the  
camcorder into focus. To prevent this, use of a tripod is  
recommended.  
White LED Light  
White LED Light can be used to brighten the subject in  
the dark place during video recording.  
1 Press LIGHT repeatedly to change the setting.  
OFF: Turns off the light.  
ON: The light is on always. (  
AUTO: The light turns on automatically when dark.  
appears.)  
appears.)  
Wipe Or Fader Effects  
(
IMPORTANT:  
2 Press the Recording Start/Stop Button to start video  
Some Wipe/Fader Effects cannot be used with certain modes  
of Program AE with special effects. (See the right column.) If  
an unusable Wipe/Fader Effect is selected, its indicator blinks  
in blue or goes out.  
recording or SNAPSHOT to shoot a still image.  
NOTES:  
Be careful not to point the LED Light directly to eyes.  
If the light does not reach the subject, the Night-Scope  
function will be activated, and makes it possible to shoot  
the subject brighter.  
These effects let you make pro-style scene transitions.  
Use them to spice up the transition from one scene to the  
next.  
There is a difference in the brightness of the images shot  
between the centre area which is illuminated by the LED  
Light and the surrounding areas (which will be darker).  
Since subjects are shot at a reduced shutter speed when  
the White LED Light setting is ON, they will appear slightly  
blurred.  
Wipe or Fader works when video recording is started or  
stopped.  
1 Set the Power Switch to Mwhile pressing down the  
Lock Button located on the switch.  
2 Open the LCD monitor fully. (pg. 12)  
3 Set vto the desired mode. (pg. 18)  
The WIPE/FADER menu disappears and the effect is  
reserved.  
The selected effect indicator appears.  
4 Press the Recording Start/Stop Button to activate the  
Fade-in/out or Wipe-in/out.  
To deactivate the selected effect  
Select OFFin step 3. The effect indicator disappears.  
NOTE:  
You can extend the length of a Wipe or Fader by pressing and  
holding the Recording Start/Stop Button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
FEATURES FOR RECORDING EN  
23  
WIPE/FADER  
PROGRAM AE  
OFF: Disables the function. (Factory-preset)  
OFF: Disables the function. (Factory-preset)  
SHUTTER 1/50: The shutter speed is fixed at 1/  
50th of a second. Black bands that usually appear when  
shooting a TV screen become narrower.  
SHUTTER 1/120: The shutter speed is fixed at 1/  
120th of a second. The flickering that occurs when  
shooting under a fluorescent light or mercury-vapour  
lamp is reduced.  
FADERWHITE: Fade in or out with a white  
screen.  
FADERBLACK: Fade in or out with a black  
screen.  
FADERB.W: Fade in to a colour screen from a  
black and white screen, or fade out from colour to black  
and white.  
WIPECORNER: Wipe in on a black screen from  
the upper right to the lower left corner, or wipe out from  
lower left to upper right, leaving a black screen.  
SPORTS  
(Variable Shutter Speed: 1/250 1/4000)  
This setting allows fast-moving images to be captured  
one frame at a time, for vivid, stable slow-motion  
playback. The faster the shutter speed, the darker the  
picture becomes. Use the shutter function under good  
lighting conditions.  
WIPEWINDOW: The scene starts in the centre of  
a black screen and wipes in toward the corners, or  
comes in from the corners, gradually wiping out to the  
centre.  
SNOW: Compensates for subjects that may  
otherwise appear too dark when shooting in extremely  
bright surroundings such as in the snow.  
WIPESLIDE: Wipe in from right to left, or wipe out  
from left to right.  
SPOTLIGHT: Compensates for subjects that may  
otherwise appear too bright when shooting under  
extremely strong direct lighting such as spotlights.  
WIPEDOOR: Wipe in as the two halves of a black  
screen open to the left and right, revealing the scene, or  
wipe out and the black screen reappears from left and  
right to cover the scene.  
NOTE:  
SPOTLIGHThas the same effect as 3 with the exposure  
control. (pg. 25)  
WIPESCROLL: The scene wipes in from the  
bottom to the top of a black screen, or wipes out from top  
to bottom, leaving a black screen.  
TWILIGHT: Makes evening scenes look more  
natural. White Balance (pg. 26) is automatically set to  
WIPESHUTTER: Wipe in from the centre of a  
black screen toward the top and bottom, or wipe out from  
the top and bottom toward the centre leaving a black  
screen.  
, but can be changed to your desired setting. When  
Twilight is chosen, the camcorder automatically adjusts  
the focus from approx. 10 m to infinity. From less than 10  
m, adjust the focus manually.  
SEPIA: Recorded scenes have a brownish tint like  
old photos. Combine this with the Cinema mode for a  
classic look.  
Program AE With Special Effects  
MONOTONE: Like classic black and white films,  
your footage is shot in B/W. Used together with the  
Cinema mode, it enhances the classic filmeffect.  
CLASSIC FILM: Gives recorded scenes a strobe  
effect.  
IMPORTANT:  
Some modes of Program AE with special effects cannot be  
used with certain Wipe/Fader effects. (See the left column.) If  
an unusable mode is selected, the indicator of Program AE  
with Special Effects blinks or goes out.  
1 Set the Power Switch to Mwhile pressing down the  
STROBE: Your recording looks like a series of  
consecutive snapshots.  
Lock Button located on the switch.  
2 Open the LCD monitor fully. (pg. 12)  
3 Set rto the desired mode. (pg. 18)  
The PROGRAM AE menu disappears and the selected  
effect is activated.  
The selected effect indicator appears.  
To deactivate the selected effect  
Select OFFin step 3. The effect indicator disappears.  
NOTES:  
Program AE with special effects can be changed during  
recording or during Record-Standby.  
Some modes of Program AE with special effects cannot be  
used during Night-Scope.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                               
EN FEATURES FOR RECORDING  
24  
Auto Focus  
FOCUS  
SNAPSHOT  
The camcorders Full Range AF  
system offers continuous shooting  
ability from close-up (as close as  
approx. 5 cm to the subject) to  
infinity.  
MMENU/VOL.  
However, correct focus may not be  
obtainable in the situations listed  
below (in these cases perform  
Manual Focus):  
Focus detection zone  
Lock Button  
When two subjects overlap in the same scene.  
When illumination is low.*  
When the subject has no contrast (difference in brightness  
and darkness), such as a flat, one-colour wall, or a clear,  
blue sky.*  
Power Switch  
When a dark object is barely visible in the LCD monitor or  
the viewfinder.*  
When the scene contains minute patterns or identical  
patterns that are regularly repeated.  
Snapshot (For Video Recording)  
When the scene is affected by sunbeams or light reflecting  
off the surface of a body of water.  
When shooting a scene with a high-contrast background.  
This feature lets you record still images that look like  
photographs onto a tape.  
1 Set the Power Switch to Mwhile pressing down the  
* The following low-contrast warnings appear blinking:  
,
Lock Button located on the switch.  
,
and  
2 Open the LCD monitor fully. (pg. 12)  
NOTES:  
If the lens is smeared or blurred, accurate focusing is not  
possible. Keep the lens clean. (pg. 38) When  
condensation occurs, wipe with a soft cloth or wait for it to  
dry naturally.  
3 Set SNAP MODEto the desired mode.  
(pg. 18, 19)  
4 Press SNAPSHOT.  
There is the sound effect of a shutter closing.  
The Oindication appears and a still image will be  
recorded for approx. 6 seconds, then the camcorder re-  
enters the Record-Standby mode.  
When shooting a subject close to the lens, zoom out first.  
(pg. 12) If zoomed-in in the auto focus mode, the  
camcorder may automatically zoom out depending on the  
distance between the camcorder and the subject. This will  
not occur when TELE MACROis set to ON. (pg. 19)  
You can perform Snapshot also during recording. A still  
image will be recorded for approx. 6 seconds, then the  
normal recording resumes.  
Regardless of the Power Switch position (Aor M),  
Snapshot recording takes place using the selected  
Snapshot mode.  
Manual Focus  
NOTE:  
NOTES:  
If you are using the viewfinder, you should already have  
performed Viewfinder Adjustment(pg. 9).  
To remove the shutter sound, refer to BEEPon page 20.  
When WIDE MODEis set to SQUEEZE  
(pg. 20),  
1 Set the Power Switch to M”  
While focusing on a  
the Oindication blinks in blue and Snapshot recording  
becomes impossible.  
while pressing down the Lock  
Button located on the switch.  
further subject  
If Program AE with special effects (pg. 23) is engaged,  
certain modes of Program AE with special effects are  
disabled during Snapshot recording. In such a case, the  
icon blinks.  
If SNAPSHOT is pressed when DISis set to ON”  
(pg. 19), the Stabiliser will be disabled.  
During Snapshot recording, the image displayed in the  
viewfinder may be partially missing. However, there is no  
effect in the recorded image.  
2 Press FOCUS. The manual  
focus indicator appears.  
3 To focus on a further subject,  
rotate the MMENU/VOL. Wheel  
towards +. The “ ” indicator  
appears and blinks.  
Manual focus indicator  
When a cable is connected to the AV connector, the shutter  
sound is not heard from the speaker, however it is recorded  
onto the tape.  
To focus on a nearer subject,  
rotate the MMENU/VOL. Wheel  
towards “–”. The “ ” indicator  
appears and blinks.  
While focusing on a  
nearer subject  
Motor Drive Mode  
Keeping SNAPSHOT pressed in step 4 provides an  
effect similar to serial photography. (Interval between still  
images: approx. 1 second)  
To reset to Auto Focus  
Press FOCUS twice or set the  
Power Switch to A.  
If FOCUS is pressed once, the  
camcorder will enter the focus  
adjustment mode again.  
Manual focus indicator  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
FEATURES FOR RECORDING EN  
25  
NOTES:  
Iris Lock  
Be sure to focus the lens in the maximum telephoto position  
when you use the Manual Focus mode. If you focus in on a  
subject in the wide-angle position, sharply focused images  
cannot be obtained when zoomed up because the depth-  
of-field is reduced at longer focal lengths.  
Like the pupil of the human eye, the iris contracts in well-  
lit environments to keep too much light from entering,  
and dilates in dim environments to allow in more light.  
Use this function in the following situations:  
When shooting a moving subject.  
When the distance to the subject changes (so its size in the  
LCD monitor or the viewfinder changes), such as when the  
subject is backing away.  
When the focus level cannot be adjusted any further or  
closer, “ ” or “ ” will blink.  
Exposure Control  
When shooting on a reflective natural background such as  
at the beach or when skiing.  
When shooting objects under a spotlight.  
When zooming.  
Manual exposure control is recommended in the  
following situations:  
When shooting using reverse lighting or when the  
background is too bright.  
When shooting on a reflective natural background such as  
at the beach or when skiing.  
When the subject is close, keep the iris locked. Even  
when the subject moves away from you, the image will  
not darken or brighten.  
Before doing the following, perform steps 1 5 in  
Exposure Control.  
When the background is overly dark or the subject is bright.  
1 Set the Power Switch to Mwhile pressing down the  
Lock Button located on the switch.  
6 Adjust zoom so that the subject fills the LCD monitor  
or the viewfinder, then press and hold the MMENU/VOL.  
Wheel for over 2 seconds. The exposure control indicator  
and the “ ” indication appear.  
2 Open the LCD monitor fully. (pg. 12)  
3 Press the MMENU/VOL. Wheel in. The Menu Screen  
appears.  
7 Press the MMENU/VOL. Wheel  
4 Rotate the MMENU/VOL. Wheel to select  
in. The “ ” indication changes to  
p (EXPOSURE), and press it.  
and the iris is locked.  
3
5 Rotate the MMENU/VOL. Wheel to select MANUAL,  
and press it.  
To return to automatic iris  
control  
Rotate the MMENU/VOL. Wheel  
to select AUTO, then press it in  
step 5. Or, set the Power Switch to  
A.  
The exposure control indicator appears.  
6 To brighten the image, rotate the MMENU/VOL.  
Wheel towards +. To darken the image, rotate the  
MMENU/VOL. Wheel towards “–”. (maximum 6)  
+3 exposure has the same effect as the backlight  
compensation. (pg. 26)  
Iris Lock Indicator  
The exposure control indicator and “ ” disappear.  
To lock the exposure control and the iris  
After step 5 of Exposure Control, adjust the exposure  
by rotating the MMENU/VOL. Wheel. Then lock the iris in  
steps 6 and 7 of Iris Lock. For automatic locking, rotate  
the MMENU/VOL. Wheel to select AUTO, then press it  
in step 5. The exposure control and the iris become  
automatic.  
3 exposure has the same effect as when ris set to  
SPOTLIGHT. (pg. 23)  
7 Press the MMENU/VOL. Wheel in. Exposure  
adjustment is complete.  
To return to automatic exposure control  
Select AUTOin step 5. Or, set the Power Switch to A.  
NOTES:  
You cannot use the manual exposure control at the same  
time when ris set to SPOTLIGHTor SNOW”  
(pg. 23), or with the backlight compensation. (pg. 26)  
If the adjustment does not cause any visible change in  
brightness, set GAIN UPto AUTO. (pg. 18, 19)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
EN FEATURES FOR RECORDING  
26  
Backlight Compensation  
Manual White Balance Adjustment  
Backlight compensation  
brightens the subject quickly.  
Press BACKLIGHT. The  
indicator is displayed and the  
subject is brightened. If  
pressed again,  
Adjust the white balance  
manually when shooting  
under various types of  
lighting.  
1 Set the Power Switch to  
Mwhile pressing down  
the Lock Button located on  
disappears and the  
BACKLIGHT Button  
White paper  
brightness returns to the  
previous level.  
Using the BACKLIGHT  
Button may cause the light around the subject to become  
too bright and the subject to become white.  
Backlight compensations is also available when the Power  
Switch is set to A.  
the switch.  
2 Open the LCD monitor fully. (pg. 12)  
3 Set uto MWB. (pg. 18)  
indication blinks slowly.  
4 Hold a sheet of plain white paper in front of the  
subject. Adjust zoom or position yourself so that the  
white paper fills the screen.  
White Balance Adjustment  
5 Press the MMENU/VOL. Wheel in until  
begins  
blinking rapidly.  
The white balance that refers to the correctness of colour  
reproduction under various lighting. If the white balance  
is correct, all other colours will be accurately reproduced.  
The white balance is usually adjusted automatically.  
However, more advanced camcorder operators control  
this function manually to achieve a more professional  
colour/tint reproduction.  
When the setting is completed,  
resumes normal  
blinking.  
6 Press the MMENU/VOL. Wheel in twice. The Menu  
Screen closes and the Manual White Balance indicator  
is displayed.  
NOTES:  
In step 4, it may be difficult to focus on the white paper. In  
such a case, adjust focus manually. (pg. 24)  
A subject can be shot under various types of lighting  
conditions indoors (natural, fluorescent, candlelight, etc.).  
Because the colour temperature is different depending on  
the light source, the subject tint will differ depending on the  
white balance settings. Use this function for a more natural  
result.  
To change the setting  
Set uto the desired mode. (pg. 18)  
The selected mode indicator except AUTOappears.  
[AUTO]: White balance is adjusted automatically.  
MWB: Adjust the white balance manually when  
shooting under various types of lighting. (Manual  
White Balance Adjustment)  
Once you adjust white balance manually, the setting is  
retained even if the power is turned off or the battery  
removed.  
FINE: Outdoors on a sunny day.  
CLOUD: Outdoors on a cloudy day.  
HALOGEN: A video light or similar type of lighting  
is used.  
[ ] = Factory-preset  
To return to automatic white balance  
Set uto AUTO. (pg. 18)  
Or, set the Power Switch to A.  
NOTE:  
White balance cannot be used when ris set to SEPIAor  
MONOTONE. (pg. 23)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
EDITING EN  
27  
To use this camcorder as a player  
Dubbing To Or From A VCR  
1 Following the illustrations, connect the camcorder and  
the VCR. Also refer to page 17.  
2 Set the camcorders Power Switch to PLAYwhile  
pressing down the Lock Button located on the switch.  
3 Turn on the VCRs power.  
4 Insert the source cassette in the camcorder.  
5 Insert the recording cassette in the VCR.  
6 Engage the VCRs AUX and Record-Pause modes.  
Refer to the instruction manual for the VCR.  
7 Press 4/9 on the camcorder to start playback of the  
source tape.  
To AV  
To S  
8 At the point you want to start dubbing, engage the  
VCRs Record mode.  
Audio/Video  
cable  
(provided)  
S-Video cable  
(optional)  
9 To pause dubbing, engage the VCRs Record-Pause  
mode and press 4/9 on the camcorder.  
10 Repeat steps 7 9 for additional editing. Stop the  
VCR and camcorder.  
NOTES:  
It is recommended to use the AC Adapter as the power  
supply instead of the battery pack. (pg. 7)  
As the camcorder starts to play your footage, it will appear  
on your TV. This will confirm the connections and the AUX  
channel for dubbing purposes.  
1
2
3
4
Before you start dubbing, make sure that the indications do  
not appear on the connected TV. If they do, they are being  
recorded onto the new tape.  
Cable Adapter*  
Y/C/CVBSVideo  
Out Select Switch  
To choose whether or not the following displays appear  
on the connected TV  
Date/time  
To TV or VCR  
Set DATE/TIMEto AUTO, ONor OFF.  
(pg. 18, 21) Or, press DISPLAY on the remote control  
to turn on/off the date indication.  
TV  
Time code  
Set TIME CODEto OFFor ON. (pg. 18, 21)  
Indications other than date/time and time code  
Set ON SCREENto OFF, LCDor LCD/TV.  
(pg. 18, 21)  
VCR  
A White to AUDIO L IN or OUT  
B Red to AUDIO R IN or OUT  
C Yellow to VIDEO IN or OUT  
D To S-VIDEO IN or OUT**  
To use this camcorder as a recorder  
1) Perform steps 1 to 2 in To use this camcorder as a  
player.  
*
If your VCR has a SCART connector, use the provided  
cable adapter. (The provided cable adapter accepts only  
output signals from this camcorder. To use this camcorder  
as a recorder, use a commercially available cable  
adapter.)  
2) Set S/AV INPUTto ON. (pg. 18, 21)  
3) Set REC MODEto SPor LP. (pg. 18, 19)  
4) Insert the recording cassette in this camcorder.  
5) Press the Recording Start/Stop Button to engage the  
Record-Pause mode. The “  
indication appears  
A/V.IN  
** Connect when your TV/VCR has an S-VIDEO IN/OUT  
connector. In this case, it is not necessary to connect the  
yellow video cable.  
on the screen.  
6) Press the Recording Start/Stop Button to start  
recording. The T indication rotates.  
7) Press the Recording Start/Stop Button again to stop  
recording. The T indication stops rotating.  
NOTE:  
Set the video out select switch of the cable adapter as  
required:  
Y/C: When connecting to a TV or VCR which accepts Y/  
C signals and uses an S-Video cable.  
CVBS: When connecting to a TV or VCR which does not  
accept Y/C signals and uses an audio/video cable.  
NOTES:  
After dubbing, set S/AV INPUTback to OFF.  
Analogue signals can be converted to digital signals with  
this procedure.  
It is also possible to dub from another camcorder.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                       
EN EDITING  
28  
To use this camcorder as a player  
Dubbing To Or From A Video Unit  
Equipped With A DV Connector (Digital  
Dubbing)  
1 Make sure all units are turned off.  
2 Connect this camcorder to a video unit equipped with  
a DV input connector using a DV cable as shown in the  
illustration.  
It is also possible to copy recorded scenes from the  
camcorder onto another video unit equipped with a DV  
connector. Since a digital signal is sent, there is little if  
any image or sound deterioration.  
3 Set this camcorders Power Switch to PLAYwhile  
pressing down the Lock Button located on the switch.  
4 Turn on the video units power.  
5 Insert the source cassette in this camcorder.  
6 Insert the recording cassette in the video unit.  
7 Press 4/9 on this camcorder to start playback of the  
source cassette.  
8 At the point you want to start dubbing, engage the  
video units Record mode.  
9 To pause dubbing, engage the video units Record-  
Pause mode and press 4/9 on this camcorder.  
10 Repeat steps 7 9 for additional editing. Stop the  
video unit and camcorder.  
To DV IN/OUT  
NOTES:  
It is recommended to use the AC Adapter as the power  
supply instead of the battery pack. (pg. 7)  
If the remote control is used when both the player and  
recorder are JVC video units, both units will perform the  
same operation. To prevent this from happening, press the  
buttons on both units.  
DV cable  
(optional)  
Core filter  
If a blank portion or disturbed image is played back on the  
player during dubbing, the dubbing may stop so that an  
unusual image is not dubbed.  
Even though the DV cable is connected correctly,  
sometimes the image may not appear in step 8. If this  
occurs, turn off the power and make connections again.  
If Playback Zoom(pg. 16) or Playback Special Effects”  
(pg. 16) is attempted or SNAPSHOT is pressed during  
playback, only the original playback image recorded on the  
tape is output from the DV connector.  
To DV IN/OUT  
Video unit equipped  
with DV connector  
When using a DV cable, be sure to use the optional  
JVC VC-VDV204U DV cable.  
To use this camcorder as a recorder  
1) Perform steps 1 to 3 in To use this camcorder as a  
player.  
2) Set REC MODEto SPor LP. (pg. 18, 19)  
3) Insert the recording cassette in this camcorder.  
4) Press the Recording Start/Stop Button to engage the  
Record-Pause mode.  
The “  
indication appears on the screen.  
DV. IN  
5) Press the Recording Start/Stop Button to start  
recording. The T indication rotates.  
6) Press the Recording Start/Stop Button again to stop  
recording. The T indication stops rotating.  
NOTES:  
If no image is displayed on the LCD monitor, set S/AV  
INPUTto OFF. (pg. 18, 21)  
Digital Dubbing is performed in the sound mode recorded  
on the original tape, regardless of the current SOUND  
MODEsetting. (pg. 19)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
EDITING EN  
29  
[A] Using USB cable  
It is possible to do the following things:  
Connection To A Personal Computer  
Transfer still/moving images recorded on a tape to a  
PC.  
Capture still/moving images in real-time.  
Use this camcorder as a WebCam.  
[A] Using USB cable  
[B] Using DV cable  
OR  
[B] Using DV cable  
It is also possible to transfer still/moving images to a PC  
with a DV connector by using the provided software,  
software equipped with the PC or commercially available  
software.  
NOTES:  
To USB  
To DV IN/OUT  
Refer to “SOFTWARE INSTALLATION AND USB  
CONNECTION GUIDE” for the installation of the bundled  
software and drivers.  
The software operation manual is provided as PDF file on  
the CD-ROM.  
It is recommended to use the AC Adapter as the power  
supply instead of the battery pack. (pg. 7)  
Never connect the USB cable and the DV cable  
simultaneously to the camcorder. Connect only the  
cable you wish to use to the camcorder.  
Core filter  
USB cable  
(provided)  
DV cable (optional)  
When using a DV cable, be sure to use the optional  
JVC VC-VDV206U or VC-VDV204U DV cable depending  
on the type of DV connector (4 or 6 pins) on the PC.  
If the PC connected to the camcorder via the USB cable is  
not powered, the camcorder does not enter the USB mode.  
The date/time information cannot be captured into the PC.  
Refer to the instruction manuals of the PC and Software.  
The system may not work properly depending on the PC or  
capture board you are using.  
Core filter  
To DV  
connector  
To USB  
connector  
PC with DV  
connector  
PC  
“USB MODE” and/or “ACCESSING FILES” appears  
on the LCD monitor while the PC is accessing data  
in the camcorder or the camcorder is transferring a  
file to the PC.  
NEVER disconnect the USB cable while  
“ACCESSING FILES” is displayed on the LCD  
monitor since this can result in product damage.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN EDITING  
30  
Audio Dubbing  
Insert Editing  
The audio track can be customised only when recorded  
in the 12-bit and SP modes. (pg. 19)  
Use the provided remote control.  
You can record a new scene into a previously recorded  
tape, replacing a section of the original recording with  
minimal picture distortion at the in and outpoints. The  
original audio remains unchanged.  
Use the provided remote control.  
NOTES:  
Stereo Microphone  
PAUSE  
Before performing the following steps, make sure that  
TIME CODEis set to ON. (pg. 18, 21)  
Insert Editing is not possible on a tape recorded in the LP  
mode or on a blank portion of a tape.  
START/  
STOP  
To perform Insert Editing while watching in the television,  
make connections. (pg. 17)  
REW  
1 Play back the tape, locate the Edit-Out point and  
press PAUSE (9). Confirm the time code at this point.  
(pg. 13)  
PLAY  
A.DUB  
INSERT  
STOP  
2 Press REW (3) until the Edit-In point is located,  
Speaker  
then press PAUSE (9).  
3 Press and hold INSERT (I) on the remote control,  
then press PAUSE (9). The 9Iindicator and the Time  
Code (min.:sec.) appear and the camcorder enters  
Insert-Pause mode.  
1 Play back the tape to locate the point where editing  
will start, then press PAUSE (9).  
2 While holding A. DUB (D) on the remote control,  
press PAUSE (9). The 9Dand MICindicators  
appear.  
4 Press START/STOP to begin editing.  
Confirm the insert at the time code you checked in step 1.  
To pause editing, press START/STOP. Press it again to  
resume editing.  
3 Press PLAY (U), then begin narrating. Speak into  
the microphone.  
To pause dubbing, press PAUSE (9).  
5 To end Insert Editing, press START/STOP, then  
STOP (8).  
4 To end Audio Dubbing, press PAUSE (9), then STOP  
(8).  
NOTES:  
To hear the dubbed sound during playback  
Set NARRATIONto ONor MIX. (pg. 18, 21)  
Program AE with special effects (pg. 23) can be used to  
spice up the scenes being edited during Insert Editing.  
During Insert Editing, the date and time information  
changes.  
NOTES:  
Sound is not heard from the speaker during Audio Dubbing.  
When editing onto a tape that was recorded at 12-bit, the  
old and new soundtracks are recorded separately.  
If you dub onto a blank space on the tape, the sound may  
be disrupted. Make sure you only edit recorded areas.  
If feedback or howling occurs during TV playback, move the  
camcorders microphone away from the TV, or turn down  
the TVs volume.  
If you perform Insert Editing onto a blank space on the  
tape, the audio and video may be disrupted. Make sure you  
only edit recorded areas.  
During Insert Editing, when the tape moves to scenes  
recorded in the LP mode or a blank portion, Insert Editing  
stops. (pg. 35)  
If you change from 12-bit to 16-bit in mid-recording and  
then use the tape for Audio Dubbing, it is not effective from  
the point where 16-bit recording began.  
During Audio Dubbing, when the tape moves to scenes  
recorded in the LP mode, scenes recorded in 16-bit audio  
or a blank portion, Audio Dubbing stops.  
To perform Audio Dubbing while watching on the television,  
make connections. (pg. 17)  
To perform Audio Dubbing with a video unit connected to  
the camcorders AV connector, first set S/AV INPUTto  
ONin VIDEO Menu. (pg. 18, 21)  
The AUXindication appears instead of MIC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
ADDITIONAL INFORMATION EN  
31  
Power (pg. 6)  
VIDEO RECORDING (pg. 11)  
Perform charging where the temperature is between 10°C  
and 35°C. 20°C to 25°C is the ideal temperature range for  
charging. If the environment is too cold, charging may be  
incomplete.  
Charging time is based on room temperature of 20°C.  
Charging times are for a fully discharged battery pack.  
Charging time varies according to the ambient temperature  
and the status of the battery pack.  
When you use the LCD monitor outdoors in direct sunlight,  
the LCD monitor may be difficult to see. If this happens, use  
the viewfinder instead.  
The cassette holder cannot be opened unless a power  
supply is attached.  
There may be a delay after you open the cassette holder  
cover until the cassette holder opens. Do not use force.  
Once the cassette holder is closed, it recedes  
automatically. Wait until it recedes completely before  
closing the cassette holder cover.  
To avoid interference with reception, do not use the AC  
Adapter near a radio.  
Since the AC Adapter processes electricity internally, it  
becomes warm during use. Be sure to use it only in well-  
ventilated areas.  
When the Recording Start/Stop button is pressed, it may  
take a few seconds before actual recording starts. The T”  
indicator starts rotating when the camcorder actually starts  
recording.  
The following operation stops charging:  
Set the Power Switch to PLAY, Aor M.  
Disconnect the AC Adapter from the camcorder.  
Unplug the AC Adapter from the AC outlet.  
Detach the battery from the camcorder.  
Using the optional AA-V40 AC Power Adapter/Charger, you  
can charge the BN-V408U/V416U/V428U battery pack  
without the camcorder. However, it cannot be used as an  
AC Adapter.  
The time required to calculate and display the remaining  
tape length, and the accuracy of the calculation, may vary  
according to the type of tape used.  
TAPE ENDappears when the tape reaches its end, and  
the power goes off automatically if left in this condition for 5  
minutes. TAPE ENDalso appears when a cassette at its  
end is loaded.  
VIDEO PLAYBACK (pg. 14)  
Clean the video heads using an optional dry cleaning  
cassette when:  
Loading/Unloading A Cassette (pg. 10)  
It takes a few seconds for the cassette holder to open. Do  
not apply force.  
No picture during playback.  
If you wait a few seconds and the cassette holder does not  
open, close the cassette holder cover and try again. If the  
cassette holder still does not open, turn the camcorder off  
then on again.  
If the tape does not load properly, open the cassette holder  
cover fully and remove the cassette. A few minutes later,  
insert it again.  
When the camcorder is suddenly moved from a cold place  
to a warm environment, wait a short time before opening  
the cassette holder cover.  
Closing the cassette holder cover before the cassette  
holder recedes may cause damage to the camcorder.  
Even when the camcorder is switched off, a cassette can  
be loaded or unloaded. After the cassette holder is closed  
with the camcorder switched off, however, it may not  
recede. It is recommended to turn the power on before  
loading or unloading.  
Blocks of noise appear during playback.  
For details, pg. 37.  
If Stop mode continues for 5 minutes when power is  
supplied from a battery, the camcorder shuts off  
automatically. To turn on again, set the Power Switch to  
You can also view the playback picture on the LCD monitor  
with it flipped over and pushed against the camcorder body.  
LCD monitor/viewfinder indications:  
When power is supplied from a battery: the “  
battery indicator is displayed. (pg. 35)  
When power is supplied from an AC outlet: the “  
battery indicator does not appear.  
When a cable is connected to the AV connector, the sound  
is not heard from the speaker.  
When resuming recording, once you open the cassette  
holder cover a blank portion will be recorded on the tape or  
a previously recorded scene will be erased (recorded over)  
regardless of whether the cassette holder came out or not.  
See Recording From The Middle Of A Tape(pg. 13).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
EN TROUBLESHOOTING  
32  
If the problem still exists after following the steps below,  
please consult your nearest JVC dealer.  
During recording, the date/ time does not appear.  
DATE/TIMEis set to OFF.  
HSet DATE/TIMEto ON. (pg. 18, 20)  
The camcorder is a microcomputer-controlled device.  
External noise and interference (from a TV, a radio, etc.)  
might prevent it from functioning properly. In such  
cases, first disconnect its power supply unit (battery  
pack, AC Adapter, etc.) and wait a few minutes; and  
then re-connect it and proceed as usual from the  
beginning.  
During recording, sound cannot be heard.  
This is normal.  
The LCD monitor or viewfinder indications blink.  
Certain Wipe/Fader effects, certain modes of Program AE  
with special effects, DISand other functions that cannot  
be used together are selected at the same time.  
HRe-read the sections covering Wipe/Fader effects,  
Program AE with special effects and DIS. (pg. 18 23)  
Power  
No power is supplied.  
The power is not connected properly.  
HConnect the AC Adapter securely. (pg. 7)  
The battery is dead.  
HReplace the dead battery with a fully charged one.  
(pg. 6, 7)  
Digital Zoom does not work.  
16X optical zoom is selected.  
HSet ZOOMto 40Xor 900X. (pg. 19)  
Coloured bright spots appear all over the LCD  
monitor.  
The LCD monitor is not open fully or the viewfinder is not  
pulled out when recording.  
HOpen the LCD monitor fully or pull out the viewfinder.  
White spots or bright spots of light (red, green or blue) may  
appear on the LCD monitor. This may occur when the  
Night-Scope function is activated during recording and is  
not a malfunction.  
The POWER/CHARGE lamp blinks in the Record-  
Standby mode.  
If the Record-Standby mode continues for 5 minutes, the  
camcorders power shuts off automatically.  
Video Playback  
Then, the POWER/CHARGE lamp will blink to indicate for  
charging if the battery pack is attached to the camcorder  
and its power is supplied from the AC Adapter.  
HPush back and pull out the viewfinder again or close and  
re-open the LCD monitor to return to the Record-Standby  
mode.  
Play, Rewind and Fast-Forward functions do not  
work.  
The Power Switch is set to Aor M.  
HSet the Power Switch to PLAY. (pg. 14)  
The tape is moving, but there is no picture.  
Video Recording  
Your TV has AV input terminals, but is not set to its VIDEO  
mode.  
HSet the TV to the mode or channel appropriate for video  
playback. (pg. 17)  
The cassette holder cover is open.  
HClose the cassette holder cover. (pg. 10)  
Recording cannot be performed.  
The Power Switch is set to PLAYor OFF.  
HSet the Power Switch to Aor M. (pg. 11, 18)  
The tapes erase protection tab is set to SAVE.  
HSet the tapes erase protection tab to REC. (pg. 10)  
TAPE ENDappears.  
HReplace with new cassette. (pg. 10)  
The cassette holder cover is open.  
HClose the cassette holder cover.  
Blocks of noise appear during playback, or there is  
no playback picture and the screen becomes blue.  
HClean the video heads with an optional cleaning cassette.  
(pg. 37)  
When shooting a subject illuminated by bright light,  
vertical lines appear.  
This is a result of exceedingly high contrast, and is not a  
malfunction.  
When the screen is under direct sunlight during  
shooting, the screen becomes red or black for an  
instant.  
This is not a malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TROUBLESHOOTING EN  
Advanced features  
Other problems  
The focus does not adjust automatically.  
The POWER/CHARGE lamp on the camcorder does  
not light.  
Focus is set to the Manual mode.  
HSet Focus to the Auto mode. (pg. 24)  
The lens is dirty or covered with condensation.  
HClean the lens and check the focus again. (pg. 38)  
The recording was done in a dark place, or the contrast  
was low.  
The temperature of the battery is extremely high/low.  
Charging is difficult in places subject to extremely high/low  
temperatures.  
HTo protect the battery, it is recommended to charge it in  
places with a temperature of 10°C to 35°C. (pg. 36)  
Snapshot mode cannot be used.  
SET DATE/TIME!appears.  
The Squeeze mode (SQUEEZE) is selected.  
HDisengage the Squeeze (SQUEEZE) mode. (pg. 18, 20)  
The date/time is not set.  
HSet the date/time. (pg. 8)  
The built-in clock battery has run out and the previously set  
date/time has been erased.  
The colour of Snapshot looks strange.  
HConsult your nearest JVC dealer for replacement.  
The light source or the subject does not include white. Or  
there are various different light sources behind the subject.  
HFind a white subject and compose your shot so that it also  
appears in the frame. (pg. 18, 24)  
The Sepia (SEPIA) or Monotone (MONOTONE) mode is  
activated.  
There is no picture.  
The camcorder is not getting power, or some other  
malfunction exists.  
HTurn the camcorders power off and on again. (pg. 8)  
HDisengage the Sepia (SEPIA) and Monotone  
(MONOTONE). (pg. 18, 23)  
Some functions are not available using the  
MENU/VOL. Wheel.  
The image taken using Snapshot is too dark.  
The Power Switch is set to A.  
HSet the Power Switch to M. (pg. 8)  
Shooting was performed under backlit conditions.  
HPress BACKLIGHT. (pg. 26)  
When the image is printed from the printer, a black  
bar appears at the bottom of the screen.  
The image taken using Snapshot is too bright.  
The subject is too bright.  
HSet rto SPOTLIGHT. (pg. 23)  
This is not a malfunction.  
HBy recording with DISactivated (pg. 18, 19) this can  
be avoided.  
White Balance cannot be activated.  
The Sepia (SEPIA) or Monotone (MONOTONE) mode is  
activated.  
HDisengage the Sepia (SEPIA) or Monotone (MONOTONE)  
mode before setting White Balance. (pg. 23)  
Wipe/Fader effects do not work.  
The Power Switch is set to A.  
HSet the Power Switch to M. (pg. 8)  
The Black & White Fader does not work.  
The Sepia (SEPIA) or Monotone (MONOTONE) mode is  
activated.  
HDisengage the Sepia (SEPIA) and Monotone  
(MONOTONE). (pg. 18, 23)  
Program AE with special effects does not work.  
The Power Switch is set to A.  
HSet the Power Switch to M. (pg. 8)  
The image looks like the shutter speed is too slow.  
When shooting in the dark, the unit becomes highly  
sensitive to light when GAIN UPis set to AUTO.  
HIf you want the lighting to look more natural, set GAIN UP”  
to AGCor OFF. (pg. 18, 19)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN TROUBLESHOOTING  
34  
When the camcorder is connected via the DV  
connector, the camcorder does not operate.  
Images on the LCD monitor are jittery.  
The speaker volume is too great.  
HTurn the speaker volume down. (pg. 14)  
The DV cable was plugged/unplugged with power turned  
on.  
The LCD monitor, the viewfinder and the lens have  
become dirty (ex. fingerprints).  
HTurn the camcorders power off and on again, then operate  
it.  
HWipe them gently with soft cloth. Wiping strongly can  
cause damage. (pg. 38) To clean the viewfinder, please  
consult your nearest JVC dealer.  
The rear of the LCD monitor is hot.  
The light used to illuminate the LCD monitor causes it to  
become hot.  
HClose the LCD monitor to turn it off or set the Power Switch  
to OFF, and let the unit cool down.  
Time code does not appear.  
TIME CODEis set to OFF.  
HSet TIME CODEto ON. (pg. 18, 20, 21)  
Images on the LCD monitor appear dark or whitish.  
An error indication (E01, E02 or E06) appears.  
In places subject to low temperature, images become dark  
due to the characteristics of the LCD monitor. When this  
happens, the displayed colours differ from those that are  
actually recorded. This is not a defect of the camcorder.  
HAdjust the brightness and angle of the LCD monitor.  
(pg. 9, 12)  
A malfunction of some kind has occurred. In this case the  
camcorders functions become unusable.  
Hpg. 35.  
An error indication (E03 or E04) appears.  
When the LCD monitors fluorescent light reaches the end  
of its service life, images on the LCD monitor become dark. A malfunction of some kind has occurred. In this case the  
HConsult your nearest JVC dealer.  
camcorders functions become unusable.  
Hpg. 35.  
Coloured bright spots appear all over the LCD  
monitor or the viewfinder.  
The remote control does not work.  
REMOTEis set to OFF.  
The LCD monitor and the viewfinder are made with high-  
precision technology. However, black spots or bright spots  
of light (red, green or blue) may appear constantly on the  
LCD monitor or the viewfinder during recording or  
playback. These spots are not recorded on the tape. This is  
not due to any defect of the unit. (Effective dots: more than  
99.99 %)  
HSet REMOTEto ON. (pg. 18, 20)  
The remote control does not point at the remote sensor.  
HPoint at the remote sensor. (pg. 15)  
The remote control batteries are exhausted.  
HReplace the batteries with fresh ones. (pg. 15)  
The indicators and the image colour on the LCD  
monitor are not clear.  
This may occur when the surface or the edge of the LCD  
monitor is pressed.  
The cassette will not load properly.  
The batterys charge is low.  
HInstall a fully charged battery. (pg. 6, 7)  
Picture does not appear on the LCD monitor.  
The viewfinder is pulled out and PRIORITYis set to  
FINDER.  
HPush the viewfinder back in or set PRIORITYto LCD.  
(pg. 12, 18, 20)  
The LCD monitors brightness setting is too dark.  
HAdjust the brightness of the LCD monitor. (pg. 9)  
HIf the monitor is tilted upward 180 degrees, open the  
monitor fully. (pg. 12)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TROUBLESHOOTING EN  
35  
Warning Indications  
A. DUB ERROR!  
<CANNOT DUB ON A LP RECORDED TAPE>  
<CANNOT DUB ON A 16bit RECORDING>  
<CHECK TAPES ERASE PROTECTION TAB>  
Displays the battery remaining power.  
Remaining power level  
Appears if Audio Dubbing is attempted on a tape  
recorded in the LP mode. (pg. 30)  
Appears if Audio Dubbing is attempted on a tape  
recorded in 16-bit audio. (pg. 30)  
Appears if A. DUB (D) on the remote control is pressed  
when the erase protection tab is set to SAVE.  
(pg. 30)  
High  
Exhausted  
As the battery power comes close to nil, the battery  
indicator blinks.  
When the battery power is exhausted, power turns off  
automatically.  
INSERT ERROR!  
Appears if Insert Editing is attempted on a blank portion  
of a tape. (pg. 30)  
Appears when no tape is loaded. (pg. 10)  
CHECK TAPES ERASE PROTECTION TAB  
INSERT ERROR!  
<CANNOT EDIT ON A LP RECORDED TAPE>  
<CHECK TAPES ERASE PROTECTION TAB>  
Appears when the erase protection tab is set to SAVE”  
while the Power Switch is set to Aor M. (pg. 8)  
USE CLEANING CASSETTE  
Appears if Insert Editing is attempted on a tape  
recorded in the LP mode. (pg. 30)  
Appears if INSERT (I) on the remote control is  
pressed when the erase protection tab is set to SAVE.  
(pg. 30)  
Appears if dirt is detected on the heads during recording.  
Use an optional cleaning cassette. (pg. 37)  
CONDENSATION, OPERATION PAUSED  
COPYING FAILED  
PLEASE WAIT  
Appears if dubbing of copyguarded signals is attempted  
while this camcorder is being used as a recorder.  
Appears if condensation occurs. (The two indications  
above swiches alternately every 3 seconds.) When this  
indication is displayed, wait more than 1 hour until  
condensation disappears.  
E01, E02 or E06  
UNIT IN SAFEGUARD MODE REMOVE AND  
REATTACH BATTERY  
TAPE!  
The error indications (E01, E02 or E06) show what type  
of malfunction has occurred. When an error indication  
appears, the camcorder turns off automatically. Remove  
the power supply (battery, etc.) and wait a few minutes for  
the indication to clear. When it does, you can resume  
using the camcorder. If the indication remains, consult  
your nearest JVC dealer.  
Appears if a tape is not loaded when the Recording Start/  
Stop Button or SNAPSHOT Button is pressed while the  
Power Switch is set to Aor M.  
TAPE END  
Appears when the tape ends during recording or  
playback. (pg. 31)  
E03 or E04  
SET DATE/TIME!  
UNIT IN SAFEGUARD MODE EJECT AND REINSERT  
TAPE  
Appears when the date/time is not set. (pg. 8)  
Appears when the built-in clock (lithium) battery is  
discharged and the previously set date/time is erased.  
(pg. 8)  
The error indications (E03 or E04) show what type of  
malfunction has occurred. When an error indication  
appears, the camcorder turns off automatically. Eject the  
cassette once and re-insert it, then check if the indication  
clears. When it does, you can resume using the  
camcorder. If the indication remains, consult your nearest  
JVC dealer.  
LENS CAP  
Appears for 5 seconds after power is turned on if the lens  
cap is attached.  
A. DUB ERROR!  
Appears if Audio Dubbing is attempted on a blank portion  
of a tape. (pg. 30)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
EN CAUTIONS  
36  
Battery Packs  
Cassettes  
The supplied battery pack is  
a lithium-ion battery. Before  
using the supplied battery  
pack or an optional battery  
pack, be sure to read the  
following cautions:  
To avoid hazards…  
...do not burn.  
...do not short-circuit the  
terminals. When transporting, make sure the provided  
battery cap is attached to the battery. If the battery cap is  
misplaced, carry the battery in a plastic bag.  
...do not modify or disassemble.  
...do not expose the battery to temperatures exceeding  
60°C, as this may cause the battery to overheat, explode  
or catch fire.  
...use only specified chargers.  
To prevent damage and prolong service life…  
...do not subject to unnecessary shock.  
...charge in an environment where temperatures are within  
the tolerances shown in the chart below. This is a chemical  
reaction type battery cooler temperatures impede  
chemical reaction, while warmer temperatures can prevent  
complete charging.  
...store in a cool, dry place. Extended exposure to high  
temperatures will increase natural discharge and shorten  
service life.  
...fully charge and then fully discharge the battery every 6  
months when storing the battery pack over a long period  
time.  
...remove from charger or powered unit when not in use, as  
some machines use current even when switched off.  
To properly use and store your cassettes, be sure to read  
the following cautions:  
During use…  
...make sure the cassette bears the Mini DV mark.  
...be aware that recording onto prerecorded tapes  
automatically erases the previously recorded video and  
audio signals.  
Terminals  
...make sure the cassette is positioned properly when  
inserting.  
...do not load and unload the cassette repeatedly without  
allowing the tape to run at all. This slackens the tape and  
can result in damage.  
...do not open the front tape cover. This exposes the tape to  
fingerprints and dust.  
Store cassettes…  
...away from heaters or other heat sources.  
...out of direct sunlight.  
...where they wont be subject to unnecessary shock or  
vibration.  
...where they wont be exposed to strong magnetic fields  
(such as those generated by motors, transformers or  
magnets).  
...vertically, in their original cases.  
LCD Monitor  
To prevent damage to the LCD monitor, DO NOT…  
...push it strongly or apply any shocks.  
...place the camcorder with the LCD monitor on the bottom.  
To prolong service life…  
...avoid rubbing it with coarse cloth.  
Be aware of the following phenomena for LCD  
monitor use. These are not malfunctions…  
...While using the camcorder, the surface around the LCD  
monitor and/or the back of the LCD monitor may heat up.  
...If you leave power on for a long time, the surface around  
the LCD monitor becomes hot.  
NOTES:  
It is normal for the battery pack to be warm after charging,  
or after use.  
Temperature Range Specifications  
Charging: 10°C to 35°C  
Operation: 0°C to 40°C  
Storage: 20°C to 50°C  
The lower the temperature, the longer recharging takes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
CAUTIONS EN  
37  
Main Unit  
How To Handle A CD-ROM  
Take care not to soil or scratch the mirror surface (opposite  
to the printed surface). Do not write anything or put a sticker  
on either the front or back surface. If the CD-ROM gets  
dirty, gently wipe it with a soft cloth outward from the centre  
hole.  
Do not use conventional disc cleaners or cleaning spray.  
Do not bend the CD-ROM or touch its mirror surface.  
Do not store your CD-ROM in a dusty, hot or humid  
environment. Keep it away from direct sunlight.  
For safety, DO NOT…  
...open the camcorders chassis.  
...disassemble or modify the unit.  
...short-circuit the terminals of the battery pack. Keep it away  
from metallic objects when not in use.  
...allow inflammables, water or metallic objects to enter the  
unit.  
...remove the battery pack or disconnect the power supply  
while the power is on.  
...leave the battery pack attached when the camcorder is not  
in use.  
Avoid using the unit…  
About moisture condensation  
You have observed that pouring a cold liquid into a glass  
will cause drops of water to form on the glassouter  
surface. This same phenomenon occurs on the head  
drum of a camcorder when it is moved from a cool place  
to a warm place, after heating a cold room, under  
extremely humid conditions or in a place directly  
subjected to the cool air from an air conditioner.  
Moisture on the head drum can cause severe damage to  
the video tape, and can lead to internal damage to the  
camcorder itself.  
...in places subject to excessive humidity or dust.  
...in places subject to soot or steam such as near a cooking  
stove.  
...in places subject to excessive shock or vibration.  
...near a television set.  
...near appliances generating strong magnetic or electric  
fields (speakers, broadcasting antennas, etc.).  
...in places subject to extremely high (over 40°C) or  
extremely low (under 0°C) temperatures.  
DO NOT leave the unit…  
...in places of over 50°C.  
...in places where humidity is extremely low (below 35%) or  
extremely high (above 80%).  
Serious malfunctioning  
If malfunctioning occurs, stop using the unit  
immediately and consult your local JVC dealer.  
...in direct sunlight.  
...in a closed car in summer.  
...near a heater.  
To protect the unit, DO NOT…  
...allow it to become wet.  
...drop the unit or strike it against hard objects.  
...subject it to shock or excessive vibration during  
transportation.  
...keep the lens directed at extremely bright objects for long  
periods.  
The camcorder is a microcomputer-controlled device.  
External noise and interference (from a TV, a radio,  
etc.) might prevent it from functioning properly. In such  
cases, first disconnect its power supply unit (battery  
pack, AC Adapter, etc.) and wait a few minutes and  
then re-connect it and proceed as usual from the  
beginning.  
...expose the lens and viewfinders lens to direct sunlight.  
...carry it by holding the LCD monitor or the viewfinder.  
...swing it excessively when using the hand strap or the grip.  
...swing the soft camera case excessively when the  
camcorder is inside it.  
Dirty heads can cause the following problems:  
...No picture during playback.  
...Blocks of noise appear during playback.  
...During recording, the Head Clog Warning indicator “  
appears.  
...Recording cannot be performed properly.  
In such cases, use an optional cleaning cassette. Insert it and  
play back. If the cassette is used more than once  
consecutively, damage to the video heads may result. After  
the camcorder plays back for about 20 seconds, it stops  
automatically. Also refer to the cleaning cassettes  
instructions.  
If, after using the cleaning cassette, the problems still exist,  
consult your nearest JVC dealer.  
Mechanical moving parts used to move the video heads and  
video tape tend to become dirty and worn out over time. In  
order to maintain a clear picture at all times, periodic check-  
ups are recommended after using the unit for about 1,000  
hours. For periodic check-ups please consult your nearest  
JVC dealer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN USER MAINTENANCE  
38  
After Use  
Cleaning The Camcorder  
1 Turn off the camcorder.  
1 To clean the exterior, wipe gently with a soft cloth. Put  
the cloth in diluted mild soap and wring it well to wipe off  
heavy dirt. Then wipe again with a dry cloth.  
2 Slide and hold OPEN/EJECT in the direction of the  
arrow, then pull the cassette holder cover open until it  
locks. The cassette holder opens automatically. Remove 2 Press the Monitor Opening Button and open the LCD  
the cassette.  
monitor. Wipe gently with a soft cloth. Be careful not to  
damage the monitor. Close the LCD monitor.  
3 Press PUSH HEREto close the cassette holder.  
Once the cassette holder is closed, it recedes  
automatically. Wait until it recedes completely before  
closing the cassette holder cover.  
3 To clean the lens, blow it with a blower brush, then  
wipe gently with lens cleaning paper.  
NOTES:  
4 Slide BATT.RELEASE 1 and remove the battery pack  
2 3.  
Avoid using strong cleaning agents such as benzine or  
alcohol.  
Cleaning should be done only after the battery pack has  
been removed or other power units have been  
disconnected.  
Mould may form if the lens is left dirty.  
When using a cleaner or chemically treated cloth refer to  
the cautions of each product.  
OPEN/EJECT  
Cassette holder  
cover  
To clean the viewfinder, please consult your nearest JVC  
dealer.  
PUSH HERE  
Remove.  
Cassette holder  
BATT.RELEASE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SPECIFICATIONS EN  
39  
Camcorder  
For Digital Video Camera  
Format  
DV format (SD mode)  
Signal format  
PAL standard  
Recording/Playback format  
Video: Digital component recording  
Audio: PCM digital recording, 32 kHz 4-channel (12-bit),  
48 kHz 2-channel (16-bit)  
Cassette  
Mini DV cassette  
For General  
Power supply  
DC 11.0 V (Using AC Adapter)  
DC 7.2 V (Using battery pack)  
Power consumption  
Approx. 3.3 W (LCD monitor off, viewfinder on)  
Approx. 4.6 W (LCD monitor on, viewfinder off)  
Approx. 8.6 W (Maximum)  
Dimensions (W x H x D)  
71 mm x 91 mm x 118 mm  
(with the LCD monitor closed and the viewfinder pushed  
back in)  
Weight  
Approx. 500 g  
(without cassette and battery)  
Approx. 590 g  
Tape speed  
SP: 18.8 mm/s, LP: 12.5 mm/s  
Maximum recording time (using 80 min. cassette)  
SP: 80 min., LP: 120 min.  
For Connectors  
S
(incl. cassette and battery)  
Operating temperature  
0°C to 40°C  
S-Video input:  
Y: 0.8 V to 1.2 V (p-p), 75 , analogue  
C: 0.2 V to 0.4 V (p-p), 75 , analogue  
S-Video output:  
Operating humidity  
35% to 80%  
Storage temperature  
20°C to 50°C  
Pickup  
1/6" CCD  
Y: 1.0 V (p-p), 75 , analogue  
C: 0.29 V (p-p), 75 , analogue  
AV  
Video input: 0.8 V to 1.2 V (p-p), 75 , analogue  
Video output: 1.0 V (p-p), 75 , analogue  
Audio input: 300 mV (rms), 50 k, analogue, stereo  
Audio output: 300 mV (rms), 1 k, analogue, stereo  
DV  
Lens  
F 1.6, f = 2.7 mm to 43.2 mm, 16:1 power zoom lens  
Filter diameter  
ø30.5 mm  
Input/output: 4-pin, IEEE 1394 compliant  
USB  
LCD monitor  
2.37" diagonally measured, LCD panel/TFT active matrix  
system  
Viewfinder  
Electronic viewfinder with 0.24" colour LCD  
Speaker  
Monaural  
5-pin  
AC Adapter  
Power requirement  
AC 110 V to 240 Vd, 50 Hz/60 Hz  
Output  
White LED Light  
Effective distance: 1.5 m  
DC 11 V G, 1 A  
Specifications shown are for SP mode unless otherwise  
indicated. E & O.E. Design and specifications subject to  
change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN INDEX  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
INDEX EN  
41  
Controls  
a Menu Wheel [MMENU/VOL.] (pg. 18)  
Speaker Volume Control [MMENU/VOL.] (pg. 14)  
b Snapshot Button [SNAPSHOT] (pg. 24)  
c Power Zoom Lever [T/W] (pg. 12)  
d Manual Focus Button [FOCUS] (pg. 24)  
Blank Search Button [BLANK SRCH] (pg. 14)  
e Dioptre Adjustment Control (pg. 9)  
f Recording Start/Stop Button (pg. 11)  
g Power Switch [A, M, PLAY, OFF] (pg. 8)  
h Lock Button (pg. 8)  
Q S-Video Input**/Output Connector [S-VIDEO]  
(pg. 17, 27)  
R USB (Universal Serial Bus) Connector (pg. 29)  
S Digital Video Connector [DV] (i.Link*) (pg. 28, 29)  
T Audio/Video Input/Output Connector [AV]  
U DC Input Connector [DC] (pg. 6, 7)  
* i.Link refers to the IEEE1394-1995 industry specification  
and extensions thereof. The logo is used for products  
compliant with the i.Link standard.  
i Stop Button [8] (pg. 14)  
j Rewind Button [3] (pg. 14)  
Night Button [NIGHT] (pg. 22)  
Indicators  
V POWER/CHARGE Lamp (pg. 8, 11)  
k Play/Pause Button [4/9] (pg. 14)  
l Fast-Forward Button [5] (pg. 14)  
Backlight Compensation Button [BACKLIGHT]  
(pg. 26)  
m Battery Release Switch [BATT.RELEASE] (pg. 6)  
n Cassette Open/Eject Switch [OPEN/EJECT]  
(pg. 10)  
o White LED Light Switch [LIGHT] (pg. 22)  
p Monitor Opening Button (pg. 12)  
For models without button, simply pull on bottom end  
of LCD monitor to open.  
Other Parts  
W Shoulder Strap Eyelet (pg. 5)  
X Battery Pack Mount (pg. 7)  
Y Grip Strap (pg. 7)  
Z LCD Monitor (pg. 12, 13)  
a Speaker (pg. 14)  
b Stud Hole (pg. 9)  
c Tripod Mounting Socket (pg. 9)  
d Cassette Holder Cover (pg. 10)  
e Stereo Microphone (pg. 30)  
f White LED Light (pg. 22)  
g Viewfinder (pg. 9)  
h Remote Sensor (pg. 15)  
i Camera Sensor  
(Be careful not to cover this area, a sensor necessary  
for shooting is built-in here.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN INDEX  
42  
During Video Playback  
LCD Monitor/Viewfinder Indications  
1
2
3 4  
5
During Video Recording  
12 b i t / M I X  
L
I
J
g
K LM  
N
O
1h40m  
A
B
MIC  
40  
x
W
T
BLANK SEARCH  
PUSH "STOP" BUTTON  
TO CANCEL  
P
Q
REC  
C
D
E
F
G
R
g
3
VOLUME  
6
BRIGHT  
1 0  
.
11. 04  
10: 00  
S
T
20 : 21 : 25  
SOUND 12 b i t  
11. 04  
10: 00  
g
9
7
8
15:55  
H
a Sound Mode Indicator (pg. 21)  
b Blank Search Indicator (pg. 14)  
c Tape Speed (pg. 19)  
d U : Playback  
X
W V  
U
a Operation Mode (pg. 8)  
b
: Night-Scope Indicator (pg. 22)  
(Appears when Night-Scope is engaged.)  
: Gain Up Mode (pg. 19)  
(Appears when “GAIN UP” is set to “AUTO” and the  
shutter speed is automatically adjusted.)  
c White LED Light Indicator (pg. 22)  
d White Balance Indicator (pg. 26)  
: Backlight Compensation Indicator (pg. 26)  
: Exposure Adjustment Indicator (pg. 25)  
f Selected Program AE With Special Effects Indicator  
(pg. 23)  
: Fast-Forward/Shuttle Search  
: Rewind/Shuttle Search  
3
9 : Pause  
9 U : Forward Frame-By-Frame Playback/Slow-  
Motion  
Y 9 : Reverse Frame-By-Frame Playback/Slow-  
Motion  
e
D : Audio Dubbing  
9D : Audio Dubbing Pause  
(Appear while a tape is running.)  
e Sound Input For Audio Dubbing (pg. 30)  
f Battery Indicator (pg. 35)  
g Date/Time (pg. 20, 21)  
h VOLUME +, – : Volume Level Indicator (Speaker)  
(pg. 14)  
(The level indicator g moves.)  
BRIGHT : Brightness Control Indicator (LCD monitor/  
Viewfinder) (pg. 9)  
g Iris Lock Indicator (pg. 25)  
h Digital Image Stabiliser (“DIS”) (pg. 19)  
i Approximate Zoom Ratio (pg. 12)  
(Appears during zooming.)  
j Zoom Indicator (pg. 12)  
(Appears during zooming.)  
(The level indicator g moves.)  
k Selected Wipe/Fader Effect Indicator (pg. 22)  
l Tape Running Indicator (pg. 11)  
(Rotates while tape is running.)  
(The level indicator g moves.)  
i Time Code (pg. 20, 21)  
m Selected Wide Mode Indicator (pg. 20)  
n Recording Speed Mode (SP/LP) (pg. 19)  
o Tape Remaining Time (pg. 12)  
p REC: (Appears during recording.) (pg. 11)  
PAUSE: (Appears during Record-Standby mode.)  
(pg. 11)  
O: (Appears when taking Snapshot.) (pg. 24)  
q Insert Editing/Insert Editing Pause Mode (pg. 30)  
r BRIGHT: Brightness Control Indicator (LCD monitor/  
Viewfinder) (pg. 9)  
(The level indicator g moves.)  
s Wind Cut Indicator (pg. 20)  
t Battery Indicator (pg. 35)  
u Date/Time (pg. 8)  
v Sound Mode Indicator (pg. 19)  
(Appears for approx. 5 seconds after turning on the  
camcorder.)  
w Manual Focus Adjustment Indicator (pg. 24)  
x Time Code (pg. 20, 21)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
A
Auto Focus ...................................................................24  
Playback Special Effects ............................................. 16  
Playback Zoom ........................................................... 16  
B
Battery Pack ........................................................6, 7, 36 Priority Setting (PRIORITY) ........................................ 20  
Beep (BEEP) ...............................................................20 Program AE With Special Effects (PROGRAM AE)  
Blank search ................................................................14  
Brightness Adjustment Of The Display (BRIGHT) .........9  
Sports (SPORTS) ................................................. 23  
Spotlight (SPOTLIGHT) ........................................ 23  
C
Cleaning The Camcorder .............................................38  
Clock adjustment (CLOCK ADJ.) ...................................8  
Connections  
Dubbing ..........................................................27, 28  
To A PC ................................................................29  
R
D
Date/Time  
Display (DATE/TIME) ......................................20, 21  
Remote control setting (REMOTE) ............................. 20  
Resetting Menu Settings (CAM RESET) ..................... 20  
Digital Image Stabilisation (DIS) ..................................19  
Dubbing .................................................................27, 28  
E
Self Recording ............................................................. 13  
Shuttle Search ............................................................. 14  
Snapshot ..................................................................... 24  
Snapshot Mode (SNAP MODE) .................................. 19  
Speaker Volume .......................................................... 14  
S-Video/AV input (S/AV INPUT) ..................... 21, 27, 28  
F
Fast-Forward The Tape ...............................................14  
G
Grip Adjustment .............................................................7  
T
Tripod Mounting ............................................................ 9  
I
Iris ................................................................................25  
Iris Lock .......................................................................25  
Unloading A Cassette ................................................. 10  
J
Journalistic Shooting ....................................................13  
Viewfinder Adjustment .................................................. 9  
L
W
Loading A Cassette .....................................................10  
White Balance (W.BALANCE) .................................... 26  
White LED Light .......................................................... 22  
Wide Mode (WIDE MODE)  
Cinema (CINEMA) ................................................ 20  
Squeeze (SQUEEZE) ........................................... 20  
Wipe In/Out ........................................................... 22, 23  
M
Manual Focus ..............................................................24  
Menu Screen  
CAMERA ...............................................................19  
CAMERA DISPLAY ..............................................20  
MANUAL ...............................................................19  
SYSTEM .........................................................20, 21  
VIDEO ...................................................................21  
VIDEO DISPLAY ...................................................21  
Z
Zooming (ZOOM) .................................................. 12, 19  
Motor Drive Mode ........................................................24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN  
Printed in Malaysia  
1203-FO-ID-PJ  
COPYRIGHT© 2003 VICTOR COMPANY OF JAPAN, LTD.  
EX  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Impact Driver 2161P and 2161XP Series User Manual
Intel Computer Hardware 281809 003 User Manual
Intel Computer Hardware BLKDH67GDB3 User Manual
Intel Personal Computer BV80605001908AK User Manual
IOGear Mouse GME222 User Manual
Kambrook Bread Maker KDM1 User Manual
Kenmore Microwave Oven 72162362 User Manual
Kenwood Car Stereo System KDC 3026R User Manual
KitchenAid Cooktop KECC501B User Manual
KitchenAid Range KESC307 User Manual