JVC Computer Monitor TM A210G User Manual

COLOR VIDEO MONITOR  
BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR  
MANUEL D’INSTRUCTIONS : MONITEUR VIDEO COULEUR  
MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI  
INSTRUCCIONES : MONITOR DE VIDEO A COLOR  
INSTRUCTIONS  
TM-A210G  
For Customer Use:  
Enter below the Serial No. which is located on the rear of the cabinet.  
Retain this information for future reference.  
Pour l’usage du client:  
Enter ci-dessous le numéro de série qui est situé sur l’arrière du coffret.  
Conserver cette information pour une référence ultérieure.  
Model No. :  
Numéro de modèle :  
TM-A210G  
Serial No. :  
Numéro de série :  
LCT1357-001A-H  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY PRECAUTIONS  
In order to prevent any fatal accidents caused by misoperation  
FCC INFORMATION (U.S.A. only)  
CAUTION: Changes or modification not approved by  
JVC could void the user's authority to operate the  
equipment.  
or mishandling the monitor, be fully aware of all the following  
precautions.  
WARNINGS  
To prevent fire or shock hazard, do not expose this  
monitor to rain or moisture. Dangerous high voltages  
are present inside the unit. Do not remove the back  
cover of the cabinet. When servicing the monitor,  
consult qualified service personnel. Never try to service  
it yourself.  
NOTE: This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there is  
no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and  
receiver.  
WARNING : THIS APPARATUS MUST  
BE EARTHED.  
Machine Noise Information Ordinance 3. GSGV,  
January 18, 1991: The sound pressure level at the  
operator position is equal or less than 70 dB(A)  
according to ISO 7779.  
Improper operations, in particular alternation of high  
voltage or changing the type of tube may result in x-ray  
emission of considerable dose. A unit altered in such a  
way no longer meets the standards of certification, and  
must therefore no longer be operated.  
– Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
– Consult the dealer or an experienced radio/TV  
technician for help.  
This monitor is equipped with a 3-blade grounding-type  
plug to satisfy FCC rule. If you are unable to insert the  
plug into the outlet, contact your electrician.  
Notice (U.S.A. only)  
This product utilizes both a Cathode Ray Tube (CRT) and  
other components that contain lead. Disposal of these  
materials may be regulated in your community due to  
environmental considerations. For disposal or recycling  
information please contact your local authorities, or the  
Electronics Industries Alliance: <http://www.eiae.org.>  
PRECAUTIONS  
÷ Use only the power source specified on the unit.  
(120 V AC/220 – 240 V AC, 50 Hz/60 Hz)  
÷ When not using this unit for a long period of time, or when  
cleaning it, be sure to disconnect the power plug from the  
AC outlet.  
÷ Unplug this unit from the AC outlet and refer servicing to  
qualified service personnel under the following conditions:  
– when the power cord is frayed or the plug is damaged,  
– if liquid has been spilled into the unit,  
– if the unit has been dropped or the cabinet has been  
damaged,  
÷ Do not allow anything to rest on the power cord. And do not  
place this unit where people will tread on the cord. Do not  
overload wall outlets or power cords as this can result in a  
fire or electric shock.  
÷ Avoid using this unit under the following conditions:  
– in extremely hot, cold or humid places,  
– in dusty places,  
– near appliances generating strong magnetic fields,  
– in places subject to direct sunlight,  
– in badly ventilated places,  
– when the unit exhibits a distinct change in performance.  
÷ Do not attempt to service this unit yourself as opening or  
removing covers may expose you to dangerous voltage or  
other hazards. Always refer servicing to qualified service  
personnel.  
÷ When replacement parts are required, have the service  
personnel verify in writing that the replacement parts he/  
she uses have the same safety characteristics as the  
original parts. Use of manufacture’s specified replacement  
parts can prevent fire, shock, or other hazards.  
÷ Upon completion of any servicing or repair work to this unit,  
please ask the service personnel to perform the safety  
check described in the manufacturer’s service literature.  
÷ When this unit reaches the end of its useful life, improper  
disposal could result in a picture tube implosion. Ask  
qualified service personnel to dispose of this unit.  
– in automobiles with doors closed.  
÷ Do not cover the ventilation slots while in operation as this  
could obstruct the required ventilation flow.  
÷ When dust accumulates on the screen surface, clean it with  
a soft cloth.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER CONNECTION  
The power supply voltage rating of this product is 120 V AC (For U.S.A. and Canada only) and 220 – 240 V AC (For European  
countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the  
power cord designated to ensure Safety and EMC regulations of each countries.  
Power cord  
Power supply voltage : 120 V AC  
220 – 240 V AC  
European countries  
220 – 240 V AC  
United Kingdom  
Countries  
: U.S.A. and Canada  
Warning:  
÷ Do not use the same Power Cord for 120 V AC as for 220 – 240 V AC. Doing so may cause malfunction, electric shock or fire.  
Note for the United Kingdom power cord only  
The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a correctly rated  
approved type, re-fit the fuse cover.  
(Consult your dealer or qualified service personnel.)  
How to replace the fuse  
Open the fuse compartment with the blade screw driver, and  
replace the fuse.  
(* An example is shown in the illustration.)  
Fuse  
SCREEN BURN  
÷ It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright  
images on screen. This may cause a burning (sticking) phenomenon on the screen of cathode-ray tube. This problem does  
not occur as far as displaying normal video playback motion images.  
CONTENTS  
SAFETY PRECAUTIONS ................................................................................. 2  
CONTROLS AND FEATURES ......................................................................... 4  
HOW TO HANDLE BASIC OPERATIONS........................................................ 7  
HOW TO USE THE MENU FUNCTIONS........................................................... 8  
HOW TO INITIALIZE THE SETTING............................................................... 11  
BASIC CONNECTION EXAMPLE.................................................................. 12  
TROUBLESHOOTING .................................................................................... 14  
SPECIFICATIONS .......................................................................................... 15  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS AND FEATURES  
FRONT VIEW  
<Front Panel>  
1 Chroma/Phase button  
CHROMA/ PHASE]  
5 Input A (VIDEO) button and lamp [INPUT  
[
SELECT A]  
Selects the video and audio signals input to the VIDEO A  
e and AUDIO A p terminals on the rear panel. The  
lamp lights when selected.  
Press this button to activate the picture color density  
adjustment mode or picture hue adjustment mode. Each  
time you press the button, the adjustment item changes.  
Picture color density  
Ô
Picture hue  
6 Input B (VIDEO /Y/C) button and lamp  
Adjust the value with the VOLUME/SELECT buttons 3.  
Also used as a control button in the menu function mode.  
[INPUT SELECT B]  
Selects the video and audio signals input to the VIDEO B  
r and AUDIO B q terminals on the rear panel. The  
lamp lights when selected.  
2 Contrast/Brightness button  
[CONTRAST  
Press this button to activate the picture contrast adjust-  
ment mode or picture brightness adjustment mode. Each  
time you press the button, the adjustment item changes.  
/ BRIGHT  
]
Notes:  
÷When both VIDEO B terminals are connected (input) at  
the same time, the Y/C terminal has priority.  
Picture contrast  
Ô
Picture brightness  
7 Power indicator  
Lights in green when the power is ON.  
Lit : When the power is on.  
Unlit : When the power is off.  
Adjust the value with the VOLUME/SELECT buttons 3.  
Also used as a control button in the menu function mode.  
3 Volume/Select buttons  
8 Power switch [POWER  
]
[VOLUME/SELECT –  
+]  
Press this switch to turn the power on or off.  
_ ON : Power is turned on.  
Adjusts the speaker volume. Also used as a control  
button in the menu function mode.  
OFF : Power is turned off.  
4 Menu button [MENU]  
9 Speaker  
Displays and disappears the <MENU> screen.  
Pressing the CHROMA/PHASE button 1 with the Menu  
button depressed will display the <SET-UP MENU>  
screen.  
A built-in speaker is located inside the right side panel  
when the monitor is viewed from the front.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
REAR VIEW  
<Rear Panel>  
p Audio A terminals [AUDIO A IN/OUT]  
Input (IN) and output (OUT) terminals for the audio signal  
corresponding to the VIDEO A terminals e.  
The output terminal is bridge-connected.  
e Video A terminals [VIDEO A IN/OUT]  
Video signal input (IN) and output (OUT) terminals.  
The output terminal is bridge-connected.  
IN : Video signal input terminal  
IN : Audio signal input terminal  
OUT : Bridge-connected video signal output terminal  
OUT : Bridge-connected audio signal output terminal  
Notes:  
Notes:  
÷ For corresponding audio signals, use the AUDIO A  
terminals p.  
÷ Also refer to BASIC CONNECTION EXAMPLE  
on page 12.  
÷ For corresponding video signals, use the VIDEO A  
terminal e.  
÷ Also refer to BASIC CONNECTION EXAMPLE  
on page 12.  
r Video B terminals [VIDEO B IN/OUT]  
Video signal input (IN) and output (OUT) terminals.  
The output terminal is bridge-connected.  
q Audio B terminals [AUDIO B IN/OUT]  
Input (IN) and output (OUT) terminals for the audio  
signals corresponding to the VIDEO B terminals r.  
The output terminal is bridge-connected.  
IN : Video signal input terminal  
OUT : Bridge-connected video signal output terminal  
IN : Audio signal input terminal  
OUT : Bridge-connected audio signal output terminal  
Notes:  
÷For corresponding audio signals, use the AUDIO B  
terminals q.  
Notes:  
÷When both VIDEO B terminals are connected (input) at  
the same time, the Y/C terminal has priority.  
÷Also refer to BASIC CONNECTION EXAMPLE on  
page 12.  
÷ For corresponding video signals, use the VIDEO B  
terminals r.  
÷ Also refer to BASIC CONNECTION EXAMPLE  
on page 12.  
t Video B (Y/C) terminals [VIDEO B Y/C IN/OUT]  
Y/C (S-video) signal input (IN) and output (OUT) terminals.  
The output terminal is bridge-connected.  
w Remote terminals  
[REMOTE INPUT, ASPECT]  
Remote terminals for external control. Selecting VIDEO A  
or VIDEO B and ASPECT RATIO is available via external  
control. External control is set in the <SET-UP MENU>  
screen.  
(The input signal is automatically terminated if a cable is  
not connected to the OUT terminals.)  
The output terminal is bridge-connected.  
IN :Y/C-separated (S-video) signal input terminal  
OUT :Bridge-connected Y/C-separated (S-video) signal  
output terminal  
To use external control, you must build a switch cable  
and connect it to the REMOTE terminals.  
External control switch  
External control  
functions  
Notes:  
Open circuit  
(open)  
Closed circuit  
(short)  
÷For corresponding audio signals, use the AUDIO B  
terminals q.  
÷When both VIDEO B terminals are connected (input) at  
the same time, the Y/C terminal has priority.  
÷Also refer to BASIC CONNECTION EXAMPLE on  
page 13.  
ASPECT RATIO  
INPUT  
4–3 (4:3)  
INPUT A  
16–9 (16:9)  
INPUT B  
Note:  
÷ Also refer to BASIC CONNECTION EXAMPLE on  
page 12.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS AND FEATURES (cont’d)  
REAR VIEW  
<Rear Panel>  
To AC outlet  
(120 V AC,  
50 Hz/60 Hz)  
For U.S.A. and Canada  
To AC outlet  
(220 – 240 V AC,  
50 Hz/60 Hz)  
For Europe  
For the United Kingdom  
y AC inlet [AC IN]  
Power input connector. Connect the provided AC power  
cord u to an AC outlet (120 V AC or 220 – 240 V AC,  
50 Hz/60 Hz).  
u Power cord  
Connects the provided power cord (120 V AC or  
220 – 240 V AC, 50 Hz/60 Hz) to the AC IN connector y.  
Caution:  
In North America (USA and Canada), this monitor comes  
with one power cable. In Europe and the United King-  
dom, two power cables are provided (one for use in  
continental European countries and the other for the UK).  
Be sure to use the power cable that is appropriate for the  
AC outlets used in your region. If none of the power  
cables provided is suitable, please contact your dealer or  
qualified service personnel to obtain the correct type of  
power cable.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO HANDLE BASIC  
OPERATIONS  
BASIC OPERATION  
STATUS indication  
(PAL or NTSC)  
1. Press the POWER switch to turn on the power.  
PAL  
_ ON : Power turns ON. (Power indicator: lit)  
OFF: Power turns OFF. (Power indicator: unlit)  
2. Press the INPUT SELECT buttons to choose input.  
Select video/audio signals input to terminals on the rear  
panel. The lamp for the selected button lights up.  
About the STATUS indication  
INPUT  
SELECT  
button  
Terminals on the rear panel  
÷ With the COLOR SYSTEM setting set  
to AUTO mode, when you turn on the  
power or select inputs, the color  
Video signal input  
Audio signal input  
1 Input A  
(VIDEO)  
VIDEO A terminal  
AUDIO A terminal  
system indication appears for about  
3 seconds on the screen while PAL or  
NTSC signals are being detected.  
It does not appear when receiving a  
B/W signal or when no signal is input.  
Refer to page 8 for more information  
about COLOR SYSTEM setting and  
page 9 for more information about  
STATUS indication setting.  
2 Input B  
(VIDEO Y/C)  
VIDEO B terminal  
VIDEO B (Y/C) terminal  
AUDIO B terminal  
Note: The Y/C (S-video) terminal has priority.  
3. Press the VOLUME/SELECT buttons to adjust the  
speaker volume.  
00 ~ 50  
Press this button to display the speaker volume level on the  
screen.  
+ : The Built-in speaker volume is increased. (00 = 50)  
: The Built-in speaker volume is decreased. (50 = 00)  
* Screen indication will disappear about 10 seconds after  
operating or immediately when you press the MENU button.  
VOLUME  
:
20  
+
PICTURE ADJUSTMENT  
1. Press select buttons corresponding to the item  
you want to adjust.  
20 ~ +20  
CHROMA  
CONTRAST  
The item you select is displayed on the screen.  
1 Phase control  
: Press the CHROMA/PHASE button  
twice.  
2 Chorma control : Press the CHROMA/PHASE button  
once.  
PHASE  
BRIGHT  
3 Brightness control: Press the CONTRAST/BRIGHT button  
twice.  
4 Contrast control : Press the CONTRAST/BRIGHT button  
PHASE  
:
00  
once.  
+
2. Adjust with the VOLUME/SELECT buttons.  
VOLUME/SELECT button  
Notes:  
Items  
+
÷ Phase control is effective only in the  
NTSC color system mode.  
÷ Chroma control is not effective when  
receiving B/W or when no signal is  
input.  
÷ When CHROMA is adjusted to “–20,”  
the picture becomes less colorful.  
÷ NO EFFECTis displayed (for about  
3 seconds) when your selected  
function has no effect.  
PHASE  
(Phase)  
reddish  
greenish  
CHROMA  
(Chroma)  
lighter  
darker  
lower  
deeper  
brighter  
higher  
BRIGHT  
(Brightness)  
CONTRAST  
(Contrast)  
* Screen indication will disappear about 10 seconds after operating or  
immediately when you press the MENU button.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE MENU FUNCTIONS  
DISPLAY AND SELECTION IN THE <MENU>  
SCREEN MODE (SETTING)  
<MENU> screen  
You can set the following menu items.  
Set them depending on your needs.  
SHARPNESS  
COLOR SYSTEM  
ASPECT RATIO  
COLOR TEMP.  
1. Press the MENU button.  
MENU  
The <MENU> screen is displayed.  
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT  
button to select MENU items.  
CHROMA  
CONTRAST  
A selection mark (3) is put next to the selected item.  
<Front panel buttons>  
1 Selection mark (3): Indicates the  
menu item you select.  
2 Menu item: Menu items you can  
select.  
3 Setting display: Indicates the current  
settings (value).  
4 Function display: The functions of  
the front panel buttons (5 buttons on  
the left) correspond to the function  
displayed.  
Front panel  
button  
Function  
displayed  
Contents  
PHASE  
BRIGHT  
CHROMA/  
PHASE  
Forward selection mark (3)  
CONTRAST/  
BRIGHT  
5
Reverse selection mark (3)  
3. Press the VOLUME/SELECT buttons to set.  
Function  
Contents  
displayed  
Front panel  
button  
VOLUME/  
SELECT (+)  
Function  
displayed  
+
Contents  
5
Forward the menu item.  
Reverse the menu item.  
Increase (to max. value)  
Forward the setting value  
Decrease (to min. value)  
Reverse the setting value  
3
Lower the adjustment  
value. (to the minimum)  
VOLUME/  
2
SELECT ()  
+
Raise the adjustment  
value. (to the maximum)  
Menu items  
SHARPNESS  
Purpose  
Setting range  
3
2
Forward the setting value.  
Reverse the setting value.  
Exits the <MENU> screen.  
00  
+1  
+04  
+05  
Picture sharpness  
Color system  
Aspect ratio  
COLOR  
SYSTEM  
EXIT  
ASPECT RATIO  
4 3  
16 9  
Color temperature of white  
balance  
Notes:  
9300  
6500  
COLOR TEMP.  
÷ When the screen aspect ratio is set to  
16 9 (16:9) in ASPECT RATIO, the  
picture will be vertically reduced.  
÷ When ASPECT REMOTE is set to  
ON in the <SET-UP MENU> screen,  
REMOTE is displayed in ASPECT  
RATIO. ASPECT RATIO cannot be  
set in the MENU when ASPECT  
REMOTE is ON.  
4. If you want to set the other menu items, repeat  
procedures 2 and 3.  
5. Press the MENU button to quit.  
MENU  
Front panel  
button  
Function  
displayed  
Contents  
Quit (or Release) the <MENU>  
screen  
MENU  
EXIT  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISPLAY AND SELECTIONS IN THE <SET-UP  
MENU> MODE (SETTING)  
<SET-UP MENU> screen  
You can set the following set-up menu items.  
H. POSITION  
WHITE BALANCE  
CONTROL LOCK  
STATUS DISPLAY  
INPUT REMOTE  
ASPECT REMOTE  
Notes:  
÷ Parameter for H. POSITION can be set separately depending on the video input  
(Input A (VIDEO) or Input B (VIDEO)) selected by the input select buttons on the front  
panel.  
Select the required video input with the input select buttons on the front panel in  
advance.  
÷ WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature  
value. Set COLOR TEMP. to 6500 or 9300 on the <MENU> screen beforehand.  
1. While pressing the MENU button, press the  
CHROMA/PHASE button.  
<Front panel buttons>  
CHROMA  
MENU  
The <SET-UP MENU> screen is displayed.  
1 Selection mark (3): Indicates the  
menu item you select.  
2 Menu item: Menu items you can  
select.  
3 Setting display: Indicates the  
current settings (value).  
4 Function display: The functions of  
the front panel buttons (5 buttons  
on the left) correspond to the  
function displayed.  
PHASE  
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT  
button to select the desired menu item.  
A selection mark (3) is put next to the selected item.  
CHROMA  
CONTRAST  
Front panel  
button  
Function  
displayed  
Contents  
Function  
Contents  
displayed  
CHROMA/  
PHASE  
PHASE  
BRIGHT  
Forward selection mark (3)  
5
Forward the menu item.  
Reverse the menu item.  
CONTRAST/  
BRIGHT  
5
Reverse selection mark (2  
)
Lower the adjustment  
value. (to the minimum)  
+
Raise the adjustment  
value. (to the maximum)  
3
2
Forward the setting value.  
Reverse the setting value.  
Exit the <SET-UP MENU>  
screen. (release)  
EXIT  
DRV  
3. Press the VOLUME/SELECT buttons to set.  
Selects DRIVE adjustment.  
Front panel  
button  
Function  
displayed  
Contents  
Selects CUT OFF  
adjustment.  
CUTO  
R·B  
+
Increase (to max. value)  
Forward the setting value  
VOLUME/  
SELECT (+)  
3
Adjusts red and blue  
signal level.  
CUTO  
Selects CUT OFF setting screen  
Decrease (to min. value)  
Adjusts red, green and  
blue signal level.  
VOLUME/  
SELECT ()  
RGB  
2
Reverse the setting value  
Selects DRIVE setting screen  
DRV  
Turns the ON-SCREEN  
display on or off. (This  
function is effective only  
in the DRIVE or CUT OFF  
adjustment mode.)  
DISP  
Notes:  
÷ To adjust the white balance, select WHITE BALANCE and  
press the VOLUME/SELECT (+) or () button to display the  
CUT OFF or DRIVE setting screen, then adjust each setting.  
÷ Press the EXIT (MENU) button to return to the <SET-UP  
MENU> screen.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE MENU  
FUNCTIONS (cont’d)  
Set-up menu items  
Purpose  
Settings  
H. POSITION  
Adjusts the horizontal position of  
the screen (+ : Horizontal position  
shifts to the right/: Horizontal  
position shifts to the left)  
05  
04  
01 00 +01  
+04  
+05  
WHITE BALANCE  
Adjusts the white balance  
Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment.  
Screen setting is changed to the selected setting mode.  
DRIVE  
R.DRIVE  
B.DRIVE  
Adjusts red level  
09  
09  
09  
08  
08  
08  
01 00 +01  
01 00 +01  
01 00 +01  
+08  
+08  
+08  
+09  
+09  
+09  
Adjusts blue level  
Adjusts red cut off  
Adjusts green cut off  
Adjusts blue cut off  
CUT OFF R. CUT OFF  
G. CUT OFF  
09  
09  
08  
08  
01 00 +01  
01 00 +01  
+08  
+08  
+09  
+09  
B. CUT OFF  
CONTROL LOCK  
STATUS DISPLAY  
INPUT REMOTE  
ASPECT REMOTE  
Sets the operation buttons on the  
front panel to control lock mode  
OFF  
ON  
ON  
OFF  
Sets the status display of the color  
system  
Sets external control of input  
selection (INPUT A/B)  
OFF  
OFF  
ON  
ON  
Sets external control of the aspect  
ratio  
Notes:  
4. To set the other set-up menu items, repeat the  
procedures 2 and 3.  
÷ When the CONTROL LOCK function is  
set to ON, pressing operation buttons on  
the front panel will display the message  
CONTROL LOCK ON!on the screen  
for about 3 seconds.  
5. Press the MENU button to quit.  
÷ The CONTROL LOCK function is  
maintained even when the power is  
turned off.  
÷ To turn off the CONTROL LOCK  
function, while holding the MENU button  
press the CHROMA/PHASE button.  
Then set the CONTROL LOCK function  
to OFF.  
MENU  
Front panel Function  
Contents  
button  
displayed  
Quit (or Release) the <MENU>  
screen  
MENU  
EXIT  
÷ Even when the CONTROL LOCK  
function is set to ON, the following  
operations are available:  
Power Switch operation  
Volume control with the VOLUME/  
SELECT buttons  
External control when INPUT  
REMOTE or ASPECT REMOTE is  
valid  
Display or disappear of the <SET-UP  
MENU> screen.  
÷ The STATUS DISPLAY function can be  
set to display (ON) or not display (OFF)  
the present color system when the  
power is turned on or the input signal is  
changed. Refer to page 7 for more  
information.  
When the INPUT REMOTE function is  
valid (ON), pressing the Input A or  
Input B buttons will display the message  
REMOTE ON!on the screen for about  
3 seconds.  
÷ To enable INPUT REMOTE or ASPECT  
REMOTE, select the function on the  
<SET-UP MENU> screen and set to ON.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO INITIALIZE THE  
SETTING  
SCREEN DISPLAY AND SELECTIONS IN THE  
<SET-UP MENU> RESET MODE  
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and  
the volume level to their factory-set (initial) values.  
<SET-UP MENU> RESET screen  
<SETUP MENU> RESET  
Are you sure ?  
Yesthen <+>  
1. Press the Power ( ) switch to turn the power  
No”  
then <MENU>  
OFF ().  
2. While pressing both MENU button and CHROMA/  
PHASE button, press the Power ( ) switch to turn  
the power ON (_).  
Initial settings  
Initialization  
(setting)  
Functions (Items)  
The <SET-UP MENU> RESET screen is displayed.  
* The screen automatically disappears when no operation  
is performed after about 5 minutes.  
SHARPNESS  
+03  
AUTO  
43  
COLOR SYSTEM  
ASPECT RATIO  
COLOR TEMP.  
6500  
Note:  
H. POSITION  
00  
÷ The <SET-UP MENU> RESET screen will not be  
displayed if the MENU or CHROMA/PHASE buttons are  
pressed for a very short time. Keep pressing them until  
the display screen appears.  
WHITE BALANCE  
R. CUT OFF 00  
G. CUT OFF 00  
B. CUT OFF 00  
R. DRIVE  
B. DRIVE  
00  
00  
CONTROL LOCK OFF  
STATUS DISPLAY ON  
3. Setting  
INPUT REMOTE  
OFF  
ASPECT REMOTE OFF  
Initialization is required.  
PHASE  
00  
00  
00  
00  
CHROMA  
CONTRAST  
BRIGHT  
Press the VOLUME/SELECT [+] button.  
* Initialization is completed, and the <SET-UP MENU>  
RESET screen disappears.  
Initialization is not required.  
VOLUME  
20  
MENU  
Press the MENU button.  
* Initialization is aborted, and the <SET-UP MENU>  
RESET screen disappears.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC CONNECTION EXAMPLE  
Notes:  
Before connecting your system, make sure that all units are turned off.  
The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected.  
Be sure to refer to the instructions provided with the unit(s) you are connecting.  
Each pair of input (IN) and output (OUT) terminals are bridge-connected.  
If youre not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other cables to the bridged output (OUT)  
terminal as this will cause the terminating resistance switch to open (auto terminate function).  
When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video components.  
(For example, if both terminals are connected to the same VCR, resonance may occur except during playback. This is caused by the same video  
signal loopingbetween the VCRs, and is not a malfunction.)  
Select the video input (INPUT A (VIDEO) or INPUT B (VIDEO)) with the INPUT SELECT buttons on the front panel.  
The ASPECT RATIO or INPUT A/B settings can be controlled via the REMOTE terminal by setting ASPECT REMOTE or INPUT REMOTE in the  
<SET-UP MENU> screen to valid. (Refer to pages 9 and 10.)  
7 VIDEO A Connection Example (Select Input A (VIDEO))  
Video Camera  
Video  
Video  
(Video signal cable)  
(Video signal cable)  
VCR  
Audio  
Audio  
(Audio signal cable)  
(Audio signal cable)  
Video Monitor  
Video Monitor  
VCR  
7 VIDEO B (VIDEO) Connection  
Example (Select Input B  
(VIDEO))  
Video Camera  
Audio  
Audio  
(Audio signal cable)  
(Audio signal cable)  
VCR  
Video  
Video  
(Video signal cable)  
(Video signal cable)  
Video Monitor  
REMOTE  
(Remote cable)  
REMOTE  
(Remote cable)  
Video Monitor  
VCR  
External control switch  
External control switch  
open circuit (open)  
open circuit (open)  
RCA pin  
RCA pin  
closed circuit (short)  
closed circuit (short)  
External control switch  
External control  
External control switch  
External control  
functions  
Open circuit Closed circuit  
Open circuit Closed circuit  
functions  
(open)  
(short)  
(open)  
(short)  
INPUT  
INPUT A  
INPUT B  
ASPECT RATIO  
43 (4:3)  
169 (16:9)  
: Signal Flow  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 VIDEO B (Y/C) Connection Example (Select Input B (Y/C))  
Audio  
Audio  
(Audio signal cable)  
(Audio signal cable)  
Video Camera  
VCR  
Y/C (S-video)  
(Y/C (S-video) signal cable)  
Video Monitor  
Video Monitor  
Y/C (S-video)  
VCR  
(Y/C (S-video) signal cable)  
: Signal Flow  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Solutions to common problems related to your monitor are described here. If none of the solutions presented here  
solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance.  
Problems  
Points to be checked  
Measures (Remedy)  
Firmly insert the power plug.  
No power supply.  
Is the power plug loosened or disconnected?  
No picture with the  
power on.  
Is the video signal output from the connected  
component?  
Set the connected component correctly.  
Is the input signal selected properly?  
Select the required video signal input with the  
Input select button. (See page 7.)  
Is the video cable disconnected?  
Connect the video signal cable firmly.  
(See page 12 and 13.)  
No sound.  
Is the audio signal output from the connected  
component?  
Set the connected component correctly.  
Is the volume output set to minimum?  
Adjust the speaker volume with the VOLUME/  
SELECT button. (See page 7.)  
Is the audio cable disconnected?  
Connect the audio signal cable firmly.  
(See page 12 and 13.)  
Shaking picture.  
Is the monitor close to a device generating a  
strong magnetic field?  
Move the device away from the monitor until the  
picture stabilizes.  
No colors, wrong  
color, or dark picture.  
Is the color system selected properly?  
Set COLOR SYSTEM in the <MENU> screen to  
AUTO. (See page 8.)  
Has the picture control setting (CONTRAST,  
BRIGHT, CHROMA or PHASE) been changed?  
Set each picture control to the standard setting.  
(See page 7.)  
Unnatural, irregularly Is the monitor close to a speaker, magnet or any Move the device away from the monitor and turn  
colored, or distorted  
picture.  
other device generating a strong magnetic field? the monitors power off. Wait at least 30 minutes,  
then turn the power on again.  
Dark stripes appear  
at the top and bottom  
of the screen, picture  
vertically squeezed.  
Is the aspect ratio set to 16:9?  
Set ASPECT RATIO in the <MENU> screen to  
[4 3 (4 : 3)]. (See page 8.)  
When controlling externally, ASPECT RATIO  
should be set to [4 3 (4 : 3)].  
(See page 12.)  
Function buttons on  
Has control of the buttons been locked? (Has  
Set CONTROL LOCK in the <SET-UP MENU>  
the front panel do not the CONTROL LOCK function been set to ON?) screen to OFF. (See pages 9 and 10.)  
function.  
The INPUT SELECT  
buttons do not  
function.  
Is input selection under external control? (Has  
the INPUT REMOTE function been set to valid  
(A/B)?)  
Set INPUT REMOTE in the <SET-UP MENU>  
screen to OFF. (See pages 9 and 10.)  
The following are not malfunctions:  
÷ When a bright still image (such as a white cloth) is displayed for a long period, it may appear to be colored. This is due to the  
structure of the cathode ray tube and will be deleted when another image is displayed.  
÷ You experience a mild electric shock when you touch the picture tube. This phenomenon is due to a normal buildup of static  
electricity on the CRT and is not harmful.  
÷ The monitor emits a strange sound when the room temperature changes suddenly. This is only a problem if an abnormality  
appears on the screen as well.  
÷ If two or more monitors are operated next to each other, their images may shake or be distorted. This phenomenon is due to  
mutual interference; it is not a malfunction. Move the monitors away from each other until the interference disappears or turn  
the power off on any monitor that is not being used.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
MODEL  
Type  
TM-A210G  
Color video monitor  
PAL, NTSC (3.58)  
Colour system  
Picture tube  
54 cm measured diagonally,  
flat-square type,  
90° deflection, in-line gun,  
vertical line trio type  
(phosphor stripe pitch H/V: 0.63/0.64 mm)  
Effective screen size  
Width  
Height  
Diagonal  
406.4 mm (16")  
304.8 mm (12")  
508 mm (20")  
Scanning frequency  
Horizontal resolution  
H: 15.734 kHz (NTSC), 15.625 kHz (PAL)  
V: 59.94 Hz (NTSC), 50 Hz (PAL)  
450 TV lines or more  
Input terminals  
VIDEO A  
Composite video: 1 line, BNC connector x 2,  
1 V(p-p), 75 , negative sync  
(bridge connection possible, auto termination)  
VIDEO B  
Composite video: 1 line, BNC connector x 2,  
1 V(p-p), 75 , negative sync  
(bridge connection possible, auto termination)  
When both  
VIDEO B  
terminals are  
connected (input)  
at the same time,  
the Y/C terminal  
has priority.  
Y/C-separated: 1 line, mini-DIN 4-pin connector x 2  
Y: 1.0 V(p-p), 75 , negative sync  
C: burst 0.286 V(p-p), 75 (NTSC), 0.3 V(p-p), 75 (PAL)  
(bridge connection possible, auto termination)  
AUDIO A  
AUDIO B  
REMOTE  
1 line (monaural), RCA pin x 2, 0.5 V(rms), high-impedance  
(bridge connection possible)  
1 line (monaural), RCA pin x 2, 0.5 V(rms), high-impedance  
(bridge connection possible)  
2 line, RCA pin x 2  
1 W (nominal)  
Audio power output  
Built-in speaker  
8 cm round x 1, impedance of 8 Ω  
Environmental conditions  
Operation temperature: 0 to 40 °C  
Operation humidity: 20 to 80% (non-condensing)  
Power requirements  
Power consumption  
Dimensions  
120 V AC / 220 240 V AC, 50 Hz/60 Hz  
1.3 A (120 V AC), 0.9 A (220 240 V AC)  
Width  
Height  
Depth  
476 mm (18-3/4")  
407.5 mm (16-1/8")  
492 mm (19-3/8")  
Weight  
28.1 kg (61.8 lbs)  
AC power cord  
Accessory  
* Illustrations used in this manual are for explanatory purposes only. The appearance of the actual product may differ slightly.  
* Dimensions and weight are approximate.  
* E. & O. E. Design and specifications subject to change without notice.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Dimensions  
Unit : mm (inch)  
< Side View >  
< Front View >  
476 (18-3/4)  
479 (18-7/8)  
1.5 (1/16)  
*
416.4 (16-1/2)  
*
CHROMA  
PHASE  
CONTRAST  
BRIGHT  
VOLUME/SELECT  
MENU  
A
B
ON  
OFF  
INPUT SELECT  
POWER  
382.8 (15-1/8)  
3.5 (1/4)  
105 (4-1/4)  
135 (5-3/8)  
128.5 (5-1/8)  
20 ( 7/8)  
492 (19-3/8)  
* Asterisks ( ) are used to indicate front panel  
*
dimensions.  
7 Y/C (Mini DIN 4 pin) terminal  
specification  
Pin No.  
Signal  
GND (Y)  
GND (C)  
Y
1
2
3
4
C
VICTOR COMPANY OF JAPAN, LIMITED  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Jackson Cooktop J051E User Manual
JBL Stereo System SR X Series User Manual
JVC VCR 0703 AH PJ BJ User Manual
Karcher Pressure Washer G 2600 PC User Manual
Karcher Water System 600 LP User Manual
Kenmore Water System 350 Series User Manual
King Canada Planer KC 125FX User Manual
Kinyo MP3 Docking Station DS 361 User Manual
KitchenAid Outdoor Cart KFBP100LSS User Manual
Kowa Switch KE811CT User Manual