Notice
There is a different between the PM915-478 & PM915P-478 Mainboard.
PM915-478 Mainboard is w/ VGA port.
PM915P-478 Mainboard is w/o VGA port.
PM915-478
PM915P-478
Download from Www.Somanuals.com. All Manuals Search And Download.
PM915-478 Mainboard
User’s Manual
Rev：EG 1.1
Date：2009.1
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
CHAPTER 1 INTRODUCTION............................ 2
1.1
1.2
1.3
Chipset Introduction...................................... 2
Specification............................................. 2
Mainboard Introduction.................................... 2
CHAPTER 2 PACKAGE CONTENTS........................ 3
CHAPTER 3 MAINBOARD LOCATIONS..................... 4
CHAPTER 4 INSTALLATION............................ 5
4.1
Jumper Setting and Slot................................... 5
CHAPTER 5 BIOS SETUP.............................. 6
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
Main menu................................................. 7
Standard CMOS Features.................................... 8
Advanced BIOS Features.................................... 9
Advanced Chipset Features................................ 10
Integrated Peripherals................................... 11
Power Management Setup................................... 13
Set Sueprvisor Password &Set User Password ............... 14
Save Exit & Without Save Exit Setup ...................... 14
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introduction
1.1 Chipset Introduction
Intel 915GL Chipset
The Intel 915GL chipset supports the latest PC technologies such as Socket
478 CPU, dual-channel DDR memory architecture and AGPe graphics card
interface. Intel Graphics Media Accelerator 900 provides a significant
increase in graphics performance.8 high-speed USB 2.0 ports.
Dual-channel DDR
This Intel 915GL chipset motherboard support TWO DDR DIMM interface that
can make you have more use room. Dual-channel can give you the fastest
frequency.
1.2 Specification
INTEL 915GL
Š
Š
Š
Š
Š
Š
Š
Š
Š
Intel 915GL+ICH6
Supports Socket 478 CPU
Supports 400/533/800MHz HOST BUS Frequency
Intel Graphics Media Accelerator 900 VGA
Dual channel Mode DDR 266/333/400MHz
Supports One AGPe (Accelerated Graphics Port Extension) slot
Supports Two PCI Slot
Supports six channel sound input
Supports Eight USB2.0 ports
1.3 Mainboard Introduction
Key Features：
-Chipset：
Intel 915GL+ICH6
-CPU：
Supports Intel Socket 478 CPU
-Supports 400/533/800MHz HOST BUS Frequency
-Memory：
Supports DDR 266/333/400MHz Memory
2
Download from Www.Somanuals.com. All Manuals Search And Download.
-Built-in Powerful Integrated Graphics
Integrated display function technologies without extend VGA card
Integrated 2D/3D Graphics Controller
-Provides one channel connecting two IDE drives
Supports Ultra ATA66/100synchronous DMA modes
-Provides four channel connecting four SATA drives
With speed up to 150MB/s
-I/O ：
One floppy port support format 360K/720K/1.2M/1.44M/2.88M disk driver
One serial port
One parallel port，supports EPP/ECP/SPP transfers
Eight USB2.0 ports
One PS/2 port
Two SATA ports
One Realtek RTL8111CPCI-E 10/100 Mbps LAN Network
-Onboard AC’97 2.3 specification compliant
Supports six channel sound input (example Realtek ALC653)
-Expansion slot：
One AGPe (Accelerated Graphics Port Extension) slot
Two 32-bit PCI slots 2.2 specification compliant
-Dimension
Micro-ATX form factor
Chapter 2 Package Contents
Your mainboard package contains the following items:
1 One Intel 915GL serial mainboard
2 One 40-pin Ultra DMA 66/100/133 IDE ribbon cable
3 SATA data cable
4 Driver installed CD
5 One user’s manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Mainboard Locations
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Installation
4.1 Jumper Setting and Slot
Clear CMOS Jumper setting
1-2（Default）
Normal
2-3
Clear CMOS
Audio：Front panel Jumper setting
PIN
1
Function
MIC+
PIN
2
Function
Ground
3
Vbias
4
AuD_Vcc(AVCC)
R_Out Back
Key
5
AuD_R_Out
N.C.
6
7
8
9
AuD_L_Out
10
L_Out Back
SATA：PIN Jumper setting
SATA1 Function
Ground
SATA3 Function
Ground
PIN
1
PIN
1
RSATA_RXP1
RSATA_RXN1
Ground
RSATA_RXP3
RSATA_RXN3
Ground
2
2
3
3
4
4
RSATA_TXN1
RSATA_TXP1
Ground
RSATA_TXN3
RSATA_TXP3
Ground
5
5
6
6
7
7
Expansion slot
DIMM1/DIMM2
PCI1/PCI2
AGPe
184 PIN DDR MEMORY SLOT
120 PIN PCI BUS expansion slots
AGPeslot
(AcceleratedGraphicsPortExtension)
USB: Expansion Connector
PIN
1
Function
PIN
2
Function
VCC：Power
VCC：Power
D-：Data - Signal
D+：Data + Signal
GND：Ground
NC
3
D-：Data - Signal
D+：Data + Signal
GND：Ground
KEY
4
5
6
7
8
9
10
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connectors
PS/2（Bottom）
PS/2（Top）
R_USB1
PS/2 Keyboard (Purple)
PS/2 Mouse Header(Green)
USB1/2 Connector Port
F_USB2/LAN
F_USB3
USB3/4/LAN Connector Port
USB5/6 Connector Port
F_USB4
USB7/8 Connector Port
LPT
Printer Connector Port
Serial Port COM1 Connector Port
On-board VGA connector
Audio Output/Audio Input/Microphone
Digital Input/Output Port
Primary/Secondary IDE Port
SATA Port
COM1
VGA
LINE OUT/LINE IN/MIC
SPDIF_I/ SPDIF_O
IDE
SATA1/SATA3
FDD
Floppy Disk Drive Connector Port
ATX/ATX_12V Power Supply Connector
Port
ATX/ATX_12V
CPU_FAN/PWR_FAN
CPU/System FAN Port
Function Port Panel
Power Supply LED
Pin2：Power Supply Anode；
Pin4：Ground
HDD LED
Pin1：Power Supply Anode；
Pin3：LED Signal
Power Supply Switch
Reset Switch
Pin6、8：Switch Signal
Pin5、7：Reset Switch
Chapter 5 BIOS Setup
The BIOS Setup Utility record settings and information of your
computer, such as date and time, the type of hardware installed, and
variousconfigurationsettings. Yourcomputerappliesthoseinformation
to initialize all the components when booting up and basic function of
coordination between system components.
If the Setup Utility configuration is incorrect, it may cause the system
to malfunction. It can even stop you computer booting properly. If it
happens, you can use the clear CMOS jumper to clear the CMOS memory which
6
Download from Www.Somanuals.com. All Manuals Search And Download.
has stored the configuration information; or you can hold down the Page
Up key while rebooting your computer. Holding down the Page Up key also
clears the setup information
5.1Main menu
You can use cursor arrow keys to highlight anyone of options on the
main menu page. Press Enter to select the highlighted option. Press
the Escape key to leave the setup utility. Press the F9 key to go back
to menu in BIOS. Some options on the main menu page lead to tables of
items with installed value that you can use cursor arrow keys to
highlightonitem, andpressPageUpandPageDownkeystocyclethrough
alternative values of that item. The other options on the main menu
page lead to dialog boxes that require your answer Yes or No by hitting
the Y or N keys. If you have already changed the setup utility, press
F10 to save those changes and exit the utility.
— Standard CMOS Features
Setup date、time、floppy type
— Advanced BIOS Features
Setup BIOS provides function，for example virus、boot-strap induct
— Advanced Chipset Features
Setup mainboard chipset parameter，for example DRAM Timing
— Integrated Peripherals
Setup include mainboard all peripherals drive
— Power Management Setup
Setup CPU、Hard disk、Monitor drive power save mode
— PnP/PCI Configurations
Setup PnP and PCI interface parameter
— PC Health Status
— Frequency/Voltage Control
7
Download from Www.Somanuals.com. All Manuals Search And Download.
— Load Fail-Safe Defaults
Setup the default values in system
— Load Optimized Defaults
Setup the best performance values in system
— Set Supervisor Password
Setup supervisor password in system
— Set User Password
Setup user password in system
— Save & Exit Setup
Setup save and exit, press Y to save and exit
— Exit Without Save Setup
Setup without save and exit, press N to without save and exit
5.2Standard CMOS Features
— Date（mm：dd：yyyy）
These items set up system date
— Time（hh：mm：ss）
These items set up system time
— Primary/Secondary Master/Slave
These items configure devices connected to the Primary and Secondary
IDE channels. To configure an IDE hard disk drive, choose Auto. If
the Auto setting fails to find a hard disk drive, set it to User, and
then fill in the hard disk characteristics manually. If you have a
CD-ROM drive, select the setting CD-ROM. If you have an ATAPI device
with removable media, select Floptical.
— Drive A/B
— Video
— Halt On
8
Download from Www.Somanuals.com. All Manuals Search And Download.
— Base Memory
— Expanded Memory
—
Total Memory
5.3 Advanced BIOS Features
— CPU Feature
Default：Press Enter
Default: 16Min
Delay Prior to Thermal
Thermal Management
Limit CPUID MaxVal
C1E Function
Default: Thermal Monitor 1
Default: Disabled
Default: Auto
Execute Disable Bit
— Removable Device Priority
Floppy Disks
Default: Enabled
Default: Press Enter
— Hard Disk Boot Priority
— Virus Warning
— CPU L1&L2 Cache
Default: Press Enter
Default：Disabled
Default：Enabled
Leave these items enabled since all the processors that can be
installed on this board have internal L2 cache memory.
Hyper-Threading Technology
— Quick Power On Self Test
— USB Flash Disk Type
Default: Enabled
Default：Enabled
Default: Floppy
Default：Removable
— First Boot Device
When system boot-strap first time detect device.
— Second Boot Device Default：CDROM
When system boot-strap first time detect device.
— Third Boot Device Default：Hard Disk
When system boot-strap first time detect device.
— Boot Other Device
Default：Enabled
9
Download from Www.Somanuals.com. All Manuals Search And Download.
If you enable this item, the system will also search for other boot
devices if it fails to find an operating system from the first two
locations.
— Swap Floppy Drive
Default：Disabled
If you have two diskette drives installed and you enable this item,
drive A becomes drive B and drive B becomes drive A.
— Boot Up Floppy Seek
— Boot Up NumLock Status
— Gate A20 Option
— Typematic Rate Setting
Typematic Rate（chars/sec）
Typematic Delay(Msec)
Default：Enabled
Default：On
Default：Normal
Default：Disabled
Default：6
Default：250
— Security Option
— ACPI Mode
Default：Setup
Default：Enabled
Default: 1.4
— MPS Version Control For OS
— OS Select For DRAM > 64MB
— Report No FDD For WIN 95
— Full screen Logo show
— Small Logo (EPA) show
Default：Non-OS2
Default：No
Default：Enabled
Default：Enabled
5.4 Advanced Chipset Features
— DRAM Timing Selectable
X CAS Latency Time
Default: By SPD
Default：Auto
X DRAM RAS# to CAS# Delay
X DRAM RAS# Precharge
Default：Auto
Default：Auto
Default: Auto
X Precharge dealy (tRAS)
X System Memory Frequency
— SLP-S4# Assertion Width
— System BIOS Cacheable
Default：Auto
Default：4 to 5 sec
Default：Enabled
10
Download from Www.Somanuals.com. All Manuals Search And Download.
— Video BIOS Cacheable
— Memory Hole At 15M-16M
— PCI Express Root port Function
PCI Express port 1
Default：Disabled
Default：Disabled
Default: Press Enter
Default: Auto
PCI Express port 2
Default: Auto
PCI Express port 3
Default: Auto
PCI Express port 4
Default: Auto
PCI Express port 5
Default: Auto
PCI Express port 6
Default: Auto
PCI-E Compliancy Mose
**VGA Setting **
Default: v1.0a
— PEG/Onchip VGA Control
— On-chip Frame Buffer Size
— DVMT Mode
— FIXED Memory Size
— DVMT Memory Size
— Boot Display
Default：Auto
Default：8MB
Default：DVMT
Default：128MB
Default：128MB
Default：Auto
5.5 Integrated Peripherals
— OnChip IDE Device
— IDE HDD Block Mode
— IDE DMA Transfer access
— On-Chip Primary/ Secondary PCI IDE
Default: Press Enter
Default：Enabled
Default：Enabled
Chipset inside the first/second channel of PCI IDE interface
Default：Enabled
— IDE Primary/Secondary Master/Slave PIO
The first/second IDE primary master/primary slave control PIO mode
Default：Auto
— IDE Primary/ Secondary Master/Slave UDMA Default：Auto
11
Download from Www.Somanuals.com. All Manuals Search And Download.
*** On-Chip Serial ATA Setting ***
X SATA Mode
Default：IDE
— On-chip serial ATA
X SATA PORT Speed Settings
PATA IDE Mode
Default: Auto
Default: Disabled
Default：Primary
Default:p1,p3ISSecondary
SATA Port
— Onboard Device
— USB Controller
Default: Press Enter
Default：Enabled
Default：Enabled
Default：Disabled
Default：Disabled
Default：Auto
— USB 2.0 Controller
— USB Keyboard Support
— USB Mouse Support
— Azalia/AC97 Audio select
— Onboard LAN controller
— BIOS ROM Write Protect
— Onboard LAN PXE ROM
Default: Enabled
Default：Enabled
Default: Enabled
— Super IO Device
— KBC input clock
Default: Press Enter
Default: 8MHZ
12
Download from Www.Somanuals.com. All Manuals Search And Download.
— POWER ON Function
X KB Power ON Password
X Hot Key Power ON
Default: BUTTON ONLY
Default: Enter
Default: Ctrl-F1
— Onboard FDC Controller
Setup onboard FDC controller
— Onboard Serial Port 1/2
Setuponboardserialport1/2
— UART Mode Select
Default: Enabled
Default：3F8/IRQ4/2F8/IRQ4
Setup UART mode select
— UR2 Duplex Mode
Default：Normal
Default：Half
— Onboard Parallel Port
Setup select parallel port
— Parallel Port Mode
Setup parallel port mode
— ECP Mode USE DMA
Default：378/IRQ7
Default：SPP
Default: 3
— PWRON After PWR-Fail
Default：off
5.6 Power Management Setup
— ACPI Function
Setup if use ACPI function
— ACPI Suspend Type
— Power Management
— Video off Method
— Video off In Suspend
— Suspend Type
Default：Enabled
Default: S1 POS
Default：User Define
Default：DPMS
Default：Yes
Default：Stop Grant
Default：3
— MODEM Use IRQ
— Suspend Mode
— HDD Power Down
— Soft-Off by PWR-BTTN
Default：Disabled
Default：Disabled
Default：Instant-Off
13
Download from Www.Somanuals.com. All Manuals Search And Download.
— Wake-up by PCI card
Default：Disabled
— Power On by Ring
— Resume by Alarm
Date (of Month) Alarm
— Time (hh:mm:ss) Alarm
Default: Disabled
Default：Disabled
Default：0
Default：0
** Reload Global Timer Events **
— Primary/ Secondary IDE 0/1
— FDD,COM,LPT Port
Default：Disabled
Default：Disabled
Default: Disabled
— PCI PIRQ [A-D]#
5.7 Set Supervisor Password &Set User Password
If you highlight this item and press Enter, a dialog box appears that
you can enter a supervisor password. You can enter no more than six
letters or numbers. Press Enter after you have typed in the password.
There will be the second dialog box asking you to retype the password
for confirmation. Press Enter after you have retyped it correctly. Then
the password is required for the access to the setup utility or for it
at start-up, depending on the setting of the password check item in
advanced setup.
5.8 Save Exit & Without Save Exit Setup
Highlight this item and press Enter to save the changes that you have
made in the setup utility configuration and exit the program. When the
save and exit dialog box appears, press Y to save and exit, or press
N to exit without saving.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
|