Integra DVD Player DPS 54 User Manual

Contents  
Important Safety Instructions ............2  
DVD Player  
Introduction .........................................7  
Connecting the DPS-5.4 ...................17  
Getting Started ..................................23  
Playing discs .....................................28  
Viewing JPEG discs..........................39  
DPS-5.4  
Instruction Manual  
Audio Settings menu ........................41  
Video Adjust menu............................42  
Thank you for purchasing the Integra DPS-5.4 DVD  
Player.Read this manual carefully before using your  
new DVD Player.A good understanding of its fea-  
tures and operation will allow you to achieve opti-  
mum performance and enjoyment.  
Initial Settings menu.........................43  
Additional information......................49  
Keep this manual for future reference.  
Using the Remote controller with Other  
Brand’s TVs............................................ 53  
Troubleshooting ................................56  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
This unit contains a semiconductor laser system and is  
classified as a “CLASS 1 LASER PRODUCT”. So, to  
use this model properly, read this Instruction Manual  
carefully. In case of any trouble, please contact the store  
where you purchased the unit.  
For U.S. model  
The laser is covered by a housing which prevents expo-  
sure during operation or maintenance. However, this  
product is classified as a Laser Product by CDRH (Cen-  
ter for Devices and Radiological Health) which is a  
department of the Food and Drug Administration.  
According to their regulations 21 CFR section 1002.30,  
all manufactures who sell Laser Products must maintain  
records of written communications between the manu-  
facturer, dealers and customers concerning radiation  
safety. If you have any complaints about instructions or  
explanations affecting the use of this product, please  
feel free to write to the address on the back page of this  
manual. When you write us, please include the model  
number and serial number of your unit.  
To prevent being exposed to the laser beam, do not try  
to open the enclosure.  
DANGER:  
VISIBLE AND INVISIBLE LASER RADIATION  
WHEN OPEN AND INTERLOCK FAILED OR  
DEFEATED. DO NOT STARE INTO BEAM.  
CAUTION:  
THIS PRODUCT UTILIZES A LASER. USE OF  
CONTROLS OR ADJUSTMENTS OR PERFOR-  
MANCE OF PROCEDURES OTHER THAN THOSE  
SPECIFIED HEREIN MAY RESULT IN HAZARD-  
OUS RADIATION EXPOSURE.  
In compliance with Federal Regulations, the certifica-  
tion, identification and the period of manufacture are  
indicated on the rear panel.  
The label on the right is  
applied on the rear panel  
except for USA and Canadian  
models.  
FCC INFORMATION FOR USER  
CAUTION:  
The user changes or modifications not expressly  
approved by the party responsible for compliance could  
void the user’s authority to operate the equipment.  
1. This unit is a CLASS 1 LASER PRODUCT and employs a  
laser inside the cabinet.  
2. To prevent the laser from being exposed, do not remove the  
cover. Refer servicing to qualified personnel.  
NOTE:  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protec-  
tion against harmful interference in a residential instal-  
lation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there is  
no guarantee that interference will not occur in a partic-  
ular installation.  
If this equipment does cause harmful interference to  
radio or television reception, which can be determined  
by turning the equipment off and on, the user is encour-  
aged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician  
for help.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions—Continued  
For Canadian model  
For European Models  
NOTE: This class B digital apparatus complies with  
Canadian ICES-003.  
Declaration of Conformity  
We,  
ONKYO EUROPE  
For models having a power cord with a polarized plug:  
ELECTRONICS GmbH  
LIEGNITZERSTRASSE  
6, 82194 GROEBENZELL,  
GERMANY  
CAUTION: TO PREVENT ELECTRIC SHOCK,  
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,  
FULLY INSERT.  
declare in own responsibility, that the ONKYO product described  
in this instruction manual is in compliance with the corresponding  
technical standards such as EN60065, EN55013, EN55020 and  
EN61000-3-2, -3-3.  
Modèle pour les Canadien  
REMARQUE: Cet appareil numérique de la classe B  
GROEBENZELL, GERMANY  
est conforme à la norme NMB-003 du Canada.  
I. MORI  
Sur les modèles dont la fiche est polarisee:  
ONKYO EUROPE ELECTRONICS GmbH  
ATTENTION: POUR ÉVITER LES CHOCS ÉLEC-  
TRIQUES, INTRODUIRE LA LAME LA PLUS  
LARGE DE LA FICHE DANS LA BORNE CORRE-  
SPONDANTE DE LA PRISE ET POUSSER  
JUSQU’AU FOND.  
1. Region Numbers  
The DVD standard uses region numbers to control how  
discs can be played around the world, the world being  
divided into six regions. This unit will only play DVD  
discs that match its region number, which can be found  
For British models  
Replacement and mounting of an AC plug on the power  
supply cord of this unit should be performed only by  
qualified service personnel.  
1
on its rear panel (e.g.,  
).  
IMPORTANT  
The wires in the mains lead are coloured in accordance  
with the following code:  
2. About this Manual  
This manual explains how to use all of this unit’s func-  
tions. Although the DVD standard offers many special  
features, not all discs use them all, so depending on the  
disc being played, this unit may not respond to certain  
functions. See the disc’s sleeve notes for supported fea-  
tures.  
When you attempt to use a DVD feature that is  
not available, this logo may appear onscreen,  
indicating that the feature is not supported by  
the current disc or this unit.  
Blue:  
Neutral  
Brown: Live  
As the colours of the wires in the mains lead of this  
apparatus may not correspond with the coloured mark-  
ings identifying the terminals in your plug, proceed as  
follows:  
The wire which is coloured blue must be connected to  
the terminal which is marked with the letter N or  
coloured black.  
The wire which is coloured brown must be connected to  
the terminal which is marked with the letter L or  
coloured red.  
3. Recording Copyright  
Unless it’s for personal use only, recording copyrighted  
material is illegal without the permission of the copy-  
right holder.  
IMPORTANT  
A 5 ampere fuse is fitted in this plug. Should the fuse  
need to be replaced, please ensure that the replacement  
fuse has a rating of 5 amperes and that it is approved by  
ASTA or BSI to BS1362. Check for the ASTA mark or  
the BSI mark on the body of the fuse.  
IF THE FITTED MOULDED PLUG IS UNSUITABLE  
FOR THE SOCKET OUTLET IN YOUR HOME  
THEN THE FUSE SHOULD BE REMOVED AND  
THE PLUG CUT OFF AND DISPOSED OF SAFELY.  
THERE IS A DANGER OF SEVERE ELECTRICAL  
SHOCK IF THE CUT OFF PLUG IS INSERTED  
INTO ANY 13 AMPERE SOCKET.  
4. Power  
WARNING  
BEFORE PLUGGING IN THE UNIT FOR THE  
FIRST TIME, READ THE FOLLOWING SECTION  
CAREFULLY.  
AC outlet voltages vary from country to country. Make  
sure that the voltage in your area meets the voltage  
requirements printed on this unit’s rear panel (e.g., AC  
120 V, 60 Hz).  
If in any doubt, consult a qualified electrician.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions—Continued  
5. Never Touch this Unit with Wet Hands  
Never handle this unit or its power cord while your  
hands are wet or damp. If water or any other liquid gets  
inside this unit, have it checked by your Integra/Onkyo  
dealer.  
9.To Obtain a Clear Picture  
This unit is a high-tech, precision device. If the lens on  
the optical pickup, or the disc drive mechanism  
becomes dirty or worn, the picture quality may be  
affected. To maintain the best picture quality, we recom-  
mend regular inspection and maintenance (cleaning or  
worn part replacement) every 1,000 hours of use  
depending on the operating environment. Contact your  
Integra/Onkyo dealer for details.  
6. Installing this Unit  
• Install this unit in a well-ventilated location.  
Ensure that there’s adequate ventilation all around  
this unit, especially if it’s installed in an audio rack. If  
the ventilation is inadequate, the unit may overheat,  
leading to malfunction.  
• Do not expose this unit to direct sunlight or heat  
sources, because its internal temperature may rise,  
shortening the life of the optical pickup.  
• Avoid damp and dusty places, and places subject to  
vibrations from loudspeakers. Never put the unit on  
top of, or directly above a loudspeaker.  
• Install this unit horizontally. Never use it on its side or  
on a sloping surface, because it may cause a malfunc-  
tion.  
10. Moisture Condensation  
Moisture condensation may damage this unit.  
Read the following carefully:  
When you take a glass containing a cold drink outside  
on a summer’s day, drops of water, called condensation,  
form on the outside of the glass. Similarly, moisture  
may condense on the lens of the optical pickup, one of  
the most important parts inside this unit.  
• Moisture condensation can occur in the following sit-  
uations:  
— The unit is moved from a cold place to a warm  
place.  
— A heater is turned on, or cold air from an air con-  
ditioner is hitting the unit.  
• If you install this unit near a TV, radio, or VCR, the  
picture and sound quality may be affected. If this  
occurs, move this unit away from the TV, radio, or  
VCR.  
— In the summer, when this unit is moved from an  
air conditioned room to a hot and humid place.  
— The unit is used in a humid place.  
7. Care  
• Do not use this unit when there’s the possibility of  
moisture condensation occurring. Doing so may dam-  
age your discs and certain parts inside this unit.  
If condensation does occur, remove all discs and  
leave this unit turned on for two to three hours. By  
this time, the unit will have warmed up and any con-  
densation will have evaporated. To reduce the risk of  
condensation, keep this unit connected to a wall out-  
let.  
Occasionally, you should dust this unit all over with a  
soft cloth. For stubborn stains, use a soft cloth damp-  
ened with a weak solution of mild detergent and water.  
Dry the unit immediately afterwards with a clean cloth.  
Do not use abrasive cloths, thinners, alcohol, or other  
chemical solvents, because they may damage the finish  
or remove the panel lettering.  
8. Handling Notes  
• If you need to transport this unit, use the original  
packaging to pack it how it was when you originally  
bought it.  
• Do not use volatile liquids, such as insect sprays, near  
this unit. Do not leave rubber or plastic items on this  
unit for a long time, because they may leave marks on  
the case.  
• This unit’s top and rear panels may get warm after  
prolonged use. This is normal.  
• When you’ve finished using this unit, remove all discs  
and turn off the power.  
• If you do not use this unit for a long time, it may not  
work properly the next time you turn it on, so be sure  
to use it occasionally.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Basic Operation  
Advanced Operation  
Playback Techniques  
Overview  
Important Safety Instructions...............................2  
Precautions .........................................................3  
Introduction..........................................................7  
Supplied Accessories ......................................7  
DPS-5.4 Features............................................7  
Disc Notes .......................................................8  
Before Using the DPS-5.4.................................11  
Installing the Batteries ...................................11  
Using the Remote Controller .........................11  
Front & Rear Panels..........................................12  
Front Panel....................................................12  
Display...........................................................13  
Rear Panel.....................................................14  
Remote Controller .........................................15  
Playing discs..................................................... 28  
Using the Disc Navigator to browse  
the contents of a disc ................................. 28  
Scanning discs.............................................. 29  
Playing in slow motion .................................. 29  
Frame advance/frame reverse...................... 30  
Looping a section of a disc ........................... 30  
Using repeat play.......................................... 31  
Using random play........................................ 32  
Creating a program list.................................. 33  
Editing a program list .................................... 34  
Other functions available  
from the program menu.............................. 35  
Searching a disc ........................................... 35  
Switching subtitles ........................................ 36  
Switching DVD audio language .................... 36  
Switching VR format DVD-RW  
Connections  
Connecting the DPS-5.4....................................17  
Before Making Any Connections ...................17  
AV Cables & Connectors...............................17  
Basic Setup ...................................................18  
Connecting Your TV ......................................19  
Connecting to an AV Receiver ......................19  
audio channel............................................. 36  
Switching audio channel when playing  
a Video CD................................................. 36  
Zooming the screen ...................................... 37  
Switching camera angles.............................. 37  
Displaying disc information ........................... 38  
Viewing JPEG discs.......................................... 39  
Viewing JPEG discs...................................... 39  
Using the JPEG Disc Navigator  
and Photo Browser..................................... 39  
Using the Photo Browser .............................. 40  
Zooming the screen ...................................... 40  
Connecting  
-compatible Components .....20  
Controlling AV Components  
that are Out of Range .................................21  
Connecting the Power/Turning on the DPS-5.4...22  
Getting Started and Setting up  
Getting Started ..................................................23  
Using the on-screen displays ........................23  
Setting up with the Setup Navigator ..............23  
Detailed Settings  
Audio Settings menu......................................... 41  
Audio DRC.................................................... 41  
Video Adjust menu............................................ 42  
Video Adjust.................................................. 42  
Initial Settings menu ......................................... 43  
Using the Initial Settings menu ..................... 43  
Digital Audio Out settings.............................. 43  
Video Output settings.................................... 44  
Language settings......................................... 45  
Display settings............................................. 46  
Options.......................................................... 47  
PhotoViewer.................................................. 48  
Basic Playback  
Playing discs..................................................25  
Basic playback controls.................................26  
Resume and Last Memory ............................26  
DVD-Video disc menus .................................27  
Video CD PBC menus...................................27  
Miscellaneous information  
Additional information........................................49  
Screen sizes and disc formats.......................49  
Resetting the player.......................................49  
Setting the TV system ...................................49  
Titles, chapters and tracks.............................50  
DVD-Video regions........................................50  
Selecting languages using the language  
Using the remote controller  
Using the Remote controller  
with Other Brand’s TVs .............................. 53  
code list.......................................................50  
Country code list............................................51  
Language code list ........................................52  
Glossary ............................................................55  
Troubleshooting.................................................56  
Specifications ....................................................59  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Supplied Accessories  
DPS-5.4 Features  
Make sure you have the following accessories:  
Highlights  
*1  
*2  
• Dolby Digital and DTS  
RC-536DV  
• DVD-Video / Video CD / Audio CD playback  
*3  
• CD-R, CD-RW (Video CD, audio CD, MP3/WMA /  
JPEG)  
• DVD-R (DVD-Video)  
• DVD-RW (DVD-Video, VR format)  
Vector Linear Shaping Circuitry  
Video  
Remote controller & 2 batteries (AA, R6)  
• Advanced 54 MHz/10-bit video D/A converter  
• Component video output  
• S-Video and composite video outputs  
• Frame-by-frame playback  
• Slow motion playback  
• Fast forward and reverse  
• Repeat playback  
AV cable (RCA/phono) (59-1/16" / 1.5 m)  
• Random playback  
• Supports 4:3 and 16:9 aspect ratio TVs  
• Multiple camera angle support  
• Parental Lock function  
S-Video cable (59-1/16" / 1.5 m)  
cable (31-7/16" / 0.8 m)  
• Screen Saver function  
Audio  
• Direct digital path for signal purity  
• 192 kHz/24-bit D/A converter  
• Optical / Coaxial digital output  
Others  
• Dynamic Range Control setting  
• Adjustable display brightness  
• Full-function remote controller  
• Use the remote controller to control your TV  
Power cord (70-7/8" / 1.8 m)  
Shape may vary depending on the area which it was pur-  
chased.  
*1. Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of Dolby  
Laboratories.  
*2. “DTS” and “DTS Digital Out” are trademarks of Digital The-  
ater Systems, Inc.  
*3.  
Windows Media, and the Windows logo are  
trademarks, or registered trademarks of  
Microsoft Corporation in the United States  
and/or other countries.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction—Continued  
• Don’t use discs with an unusual shape, such as those  
shown below, because you may damage the DPS-5.4.  
Disc Notes  
Supported Discs  
The DPS-5.4 supports the following discs.  
Disc  
Logo  
Format or file type  
See page 50 for  
region information.  
DVD-Video  
• Don’t use discs that have residue from adhesive tape,  
rental discs with peeling labels, or discs with custom-  
made labels or stickers. Doing so may damage the  
DPS-5.4 and you may not be able to remove the disc  
properly.  
DVD-Video  
DVD-R  
DVD-Video,  
VR format  
DVD-RW  
Video CD  
Audio CD  
Discs Made on Personal Computers  
Including PBC  
PCM and DTS  
Discs made on personal computers, including those of a  
compatible format, may not work properly in the DPS-  
5.4 because of incorrect settings in the disc burning soft-  
ware. Check the manuals supplied with your disc burn-  
ing software for additional compatibility information.  
Video CD, audio CD,  
MP3, WMA, JPEG  
About WMA  
CD-R  
WMA is short for Windows Media Audio and refers to  
an audio compression technology developed by  
Microsoft Corporation. WMA data can be encoded by  
using Windows Media Player version 8 or later or Win-  
dows Media Player for Windows XP.  
Video CD, audio CD,  
MP3, WMA, JPEG  
CD-RW  
JPEG  
JPEG CD  
Windows Media and the Windows logo are trademarks  
or registered trademarks of Microsoft Corporation in the  
United States and/or other countries.  
• Some audio CDs feature copy protection that doesn’t  
conform to the official CD standard. Since these are  
nonstandard discs, they may not play properly in the  
DPS-5.4.  
• The DPS-5.4 supports CD-R and CD-RW discs  
recorded in Video CD format, audio CD format, or  
ISO 9660 Level 1 or 2 format with MP3, WMA, and  
JPEG files. It also supports DVD-R and DVD-RW  
discs recorded in DVD-Video format. However, some  
CD-R, CD-RW, DVD-R, and DVD-RW discs may not  
work properly for any of the following reasons:  
incomplete disc finalization, disc burner characteris-  
tics, disc characteristics, the disc is damaged or dirty.  
See the manual supplied with your disc burner for  
more information. Condensation or dirt on the optical  
pickup lens can also affect playback.  
• The DPS-5.4 supports 8 cm and 12 cm discs.  
• The DPS-5.4 does not support disc types not listed.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction—Continued  
MP3/WMA Compatibility  
JPEG Compatibility  
• This unit will play CD-R, and CD-RW discs contain-  
ing files saved in the MPEG-1 Audio Layer 3 (MP3)  
or Windows Media Audio (WMA) format with a sam-  
pling rate of 32*, 44.1 or 48 kHz. Incompatible files  
will not play and the message “Can’t play this format”  
will be displayed (“NO PLAY” in the front panel dis-  
play).  
* This unit will not play 32 kHz WMA files encoded  
at 20 kbps.  
• Fixed bit-rate MP3 files are recommended. Variable  
bit-rate (VBR) MP3 files are playable, but playing  
times may not be shown correctly.  
• This player is compatible with WMA data encoded  
using Windows Media Player version 8 (or less) or  
Windows Media Player for Windows XP.  
• This player is not compatible with lossless-encoding  
or variable bit-rate (VBR) WMA files.  
• WMA files encoded with DRM (Digital Rights Man-  
agement) copy protection will not play and the mes-  
sage “Can’t play this format” will be displayed (“NO  
PLAY” in the front panel display).  
• WMA/MP3 discs must be ISO 9660 Level 1 or 2 com-  
pliant. CD physical format: Mode1, Mode2 XA  
Form1. Romeo and Joliet file systems are both com-  
patible with this player.  
• Use CD-R or CD-RW media for recording your files.  
The disc must be finalized (i.e. the session must be  
closed) in order to play in this unit. This player is not  
compatible with multi-session discs. Only the first ses-  
sion of a multi-session disc will be recognized.  
• This player only plays tracks that are named with the  
file extension .mp3, .MP3, .wma, or .WMA.  
• When naming MP3 and WMA files, add the corre-  
sponding file name extension (.mp3 or .wma). Files  
are played according to the file extension. To prevent  
noise and malfunctions, do not use these extensions  
for other kinds of files.  
• Baseline JPEG and EXIF 2.1* still image files up to 8  
mega-pixels are supported (maximum vertical and  
horizontal resolution is 5120 pixels).  
(*File format used by digital still cameras)  
• JPEG discs must be ISO 9660 Level 1 or 2 compliant.  
CD physical format: Mode1, Mode2 XA Form1.  
Romeo and Joliet file systems are both compatible  
with this player.  
• This player only displays files that are named with the  
file extension .jpg or .JPG.  
Copyright  
It is forbidden by law to copy, broadcast, show, broadcast  
on cable, play in public, or rent copyrighted material  
without permission.  
DVD-Video discs are copy-protected, and any record-  
ings made from these discs will be distorted.  
This product incorporates copyright protection technol-  
ogy that is protected by method claims of certain U.S.  
patents and other intellectual property rights owned by  
Macrovision Corporation and other rights owners. Use  
of this copyright-protection technology must be autho-  
rized by Macrovision Corporation, and is intended for  
home and other limited viewing uses only, unless other-  
wise authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
• This player can recognize up to 999 files (WMA/MP3/  
JPEG) and up to 499 folders. If a disc exceeds these  
limits, only files and folders up to these limits will be  
playable. Files and folders are read/displayed in alpha-  
betical order. Note that if the file structure is very com-  
plex, you may not be able to read/play all files on the  
disc.  
• Folder and track names (excluding the file extension)  
are displayed.  
• There are many different recording bit rates available  
to encode MP3 files. This unit was designed to be  
compatible with all of them. Audio encoded at  
128 Kbps should sound close to standard audio CD  
quality. This player will play lower bit-rate files, but  
please note that the sound quality becomes noticeably  
worse at lower bit-rates.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction—Continued  
Handling Discs  
• Never touch the underside of a disc.Always hold discs  
by the edge, as shown.  
Underside  
• Never attach adhesive tape or sticky labels to discs.  
Cleaning Discs  
• For best results, keep your discs clean. Fingerprints  
and dust can affect the sound and picture quality and  
should be removed as follows. Using a clean soft  
cloth, wipe from the center outwards, as shown. Never  
wipe in a circular direction.  
• To remove stubborn dust or dirt, wipe the disc with a  
damp soft cloth, and then dry it with a dry cloth.  
• Never use solvent-based cleaning fluids, such as thin-  
ner or benzine, commercially available cleaners, or  
antistatic sprays intended for vinyl records, because  
they may damage the disc.  
Storing Discs  
• Don’t store discs in places subject to direct sunlight, or  
near heat sources.  
• Don’t store discs in places subject to moisture or dust,  
such as in a bathroom or near a humidifier.  
• Always store discs in their cases and vertically. Stack-  
ing, or putting objects on unprotected discs may cause  
warping, scratches, or other damage.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Using the DPS-5.4  
Installing the Batteries  
Using the Remote Controller  
To use the remote controller, point it at the DPS-5.4’s  
remote control sensor, as shown below.  
Open the battery compartment, as shown.  
1
Remote control sensor  
DPS-5.4  
Sta  
nd  
by/  
On  
Sta  
ndb  
y
Displa  
Pow  
y
er  
Play  
M
ode  
On  
Of  
f
Dim  
mer  
Clear  
Op  
en  
/Clo  
se  
Pa  
use  
Sto  
p
Pla  
y
DPS  
-5.4  
Insert the two supplied batteries (AA) in  
accordance with the polarity diagram  
inside the battery compartment.  
30˚  
2
30˚  
Notes:  
• The remote controller may not work reliably if the  
DPS-5.4 is subjected to bright light, such as direct  
sunlight or inverter-type fluorescent lights. Keep this  
in mind when installing the DPS-5.4.  
• If another remote controller of the same type is used in  
the same room, or the DPS-5.4 is installed close to  
equipment that uses infrared rays, the remote control-  
ler may not work reliably.  
Close the battery compartment.  
3
• Don’t put anything, such as a book, on the remote con-  
troller, because the buttons may be pressed inadvert-  
ently, thereby draining the batteries.  
• The remote controller may not work reliably if the  
DPS-5.4 is installed in a rack behind colored glass  
doors. Keep this in mind when installing the DPS-5.4.  
• The remote controller will not work if there’s an obsta-  
cle between it and the DPS-5.4’s remote control sen-  
sor.  
Notes:  
• The supplied batteries should last for about six  
months, although this will vary with usage.  
• If the remote controller doesn’t work reliably, try  
replacing both batteries.  
• Don’t mix new and old batteries, or different types of  
batteries.  
• If you intend not to use the remote controller for a long  
time, remove the batteries to prevent possible leakage  
and corrosion.  
• Flat batteries should be removed as soon as possible to  
prevent possible leakage and corrosion.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front & Rear Panels  
For detailed information, refer to the pages in brackets.  
Front Panel  
A B  
C
D E F  
G
H I J  
K
L
M
N
Standby/On  
Open/Close  
Stop  
Play  
Pause  
Display  
Dimmer  
Play Mode  
Clear  
Standby  
Power  
On  
Off  
-
DPS 5.4  
S R  
Q
P
O
A Power switch [22]  
J Menu button [27]  
This button is used to display a menu on a  
This is the main power switch. When set to Off, the  
DPS-5.4 is completely shutdown. When set to On,  
the DPS-5.4 can be set to On or Standby.  
Don’t turn on the power until you’ve completed,  
and double checked all connections (pages 17–21).  
DVD-Video disc or to open the Disc Navigator  
when using a Video CD, audio CD, WMA/MP3/  
JPEG disc, or VR format DVD-RW disc.  
K Open/Close  
button [25]  
B Standby/On button [22, 25]  
This button is used to set the DPS-5.4 to On or  
Standby. For models with a Power switch, this but-  
ton has no effect unless the Power switch is set to  
On.  
This button is used to open and close the disc tray.  
L Pause button [26]  
This button is used to pause playback.  
M Stop button [26]  
This button is used to stop playback.  
C Standby indicator [22]  
This indicator lights up when the DPS-5.4 is in  
Standby.  
N Play button [25, 26]  
This button is used to start playback.  
O Down/Up  
/
buttons [26]  
D Display button [38]  
The Down button is used to select the previous  
chapter or track. During playback it selects the  
beginning of the current chapter or track.  
The Up button is used to select the next chapter or  
track.  
This button is used to display information about the  
current disc, title, chapter, or track, including the  
elapsed time, remaining time, total time, and so on.  
E Play Mode button [30–35]  
This button is used to open and close the Play Mode  
menu.  
P Setup button [23]  
This button is used to open and close the onscreen  
setup menus.  
F Remote control sensor [11]  
This sensor receives control signals from the remote  
controller.  
Q Return button [23, 27]  
This button is used to return to the main menu with-  
out saving your changes.  
G Disc tray [25]  
Discs are loaded here.  
R Clear button [34]  
H Top Menu button [27]  
This button is used to display the top menu of a  
DVD-Video disc.  
This button is used to cancel various functions.  
S Dimmer button  
This button is used to adjust the display brightness.  
I Cursor  
/
/
/
& Enter buttons [23]  
The four cursor buttons located around the central  
[Enter] button are used to navigate DVD-Video  
menus and the onscreen setup menus.  
The central [Enter] button is used to start playback  
of the selected title, chapter, or track and to confirm  
settings.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front & Rear Panels—Continued  
Display  
1
2
3
4 5 6  
7
8 9 0  
DVD  
V CD  
GUI  
TITLE  
TRACK CHP  
TOTAL REMAIN  
D
PROGRESSIVE  
A B C D  
E
B Play  
indicator  
1
D indicator  
This indicator is shown during playback.  
This indicator appears when playing Dolby Digital  
material.  
C Pause  
indicator  
2 Disc type indicators  
This indicator appears when playback is paused.  
These indicators show the type of disc loaded.  
D PROGRESSIVE indicator  
This indicator appears when the Progressive Scan-  
ning function is on.  
3 TITLE indicator  
This indicator appears while title numbers are being  
displayed. While stopped, the total number of titles  
on the current DVD-Video disc is displayed here.  
During playback, the number of the current title is  
displayed.  
E Message & time area  
Time information, such as total time, remaining  
time, and so on, is displayed here in hours, minutes,  
and seconds. Other messages are also displayed.  
4 TRACK indicator  
This indicator appears while track numbers are  
being displayed. While stopped, the total number of  
tracks on the current Video CD, audio CD, or MP3/  
WMA disc are displayed. During playback, the  
number of the current track is displayed.  
5 GUI (Graphical User Interface) indicator  
This indicator appears when the onscreen setup  
menu is open.  
6 CHP indicator  
This indicator appears while the number of the cur-  
rent chapter is being displayed.  
7 TOTAL indicator  
This indicator appears while the total time is being  
displayed.  
8 REMAIN indicator  
This indicator appears while the remaining time is  
being displayed.  
9 Repeat  
indicator  
This indicator appears when A–B playback or  
repeat playback is used.  
0 Camera angle  
indicator  
This indicator appears if the DVD-Video disc being  
played features multiple camera angles.  
A DTS indicator  
This indicator appears when playing DTS material.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front & Rear Panels—Continued  
Rear Panel  
1 2  
34  
5
6
7
8
9J  
K
A IR IN/OUT (21)  
H COMPONENT 1 VIDEO OUTPUT [19]  
These RCA/phono connectors can be used to con-  
nect a TV, projector or AV receiver with component  
video inputs.  
The IR IN connector can be used to connect a com-  
mercially available IR receiver, which can be used  
to pickup signals from the remote controller when  
the DPS-5.4 is located in another room, installed in  
a rack, or is out of range of the remote controller  
The IR OUT connector can be used to connect a  
commercially available IR emitter, which can be  
used to pass remote controller signals received by  
the IR IN along to other AV components.  
I VIDEO OUTPUT [18]  
These RCA/phono connectors can be used to con-  
nect TVs, projectors orAV receivers with composite  
video inputs.  
J S VIDEO OUTPUT [19]  
These connectors can be used to connect TVs or  
projectors with S-Video inputs.  
B OPTICAL DIGITAL AUDIO OUTPUT [19]  
This optical digital audio output can be connected  
to an optical digital audio input on a hi-fi amp, AV  
receiver, or surround sound decoder (Dolby Digital,  
DTS).  
K AC INLET [22]  
The supplied power cord is connected here. The  
other of the power cord should be connected to a  
suitable wall outlet.  
C COAXIAL DIGITAL AUDIO OUTPUT [19]  
This coaxial digital audio output can be connected  
to a coaxial digital audio input on a hi-fi amp, AV  
receiver, or surround sound decoder (Dolby Digital,  
DTS).  
D
jacks [20]  
These (Remote Interactive) connectors can be  
connected to the connectors on your other Inte-  
gra/Onkyo AV components for interactive control.  
For remote control operation, you must make an  
analog RCA/phono connection between your DPS-  
5.4 and the other AV component, even if they are  
connected digitally.  
E ANALOG AUDIO OUTPUT [18]  
These RCA/phono connectors can be connected to  
the analog audio inputs on your TV, hi-fi amp, AV  
receiver.  
F RS 232  
This RS-232 port can be connected to an external  
controller.  
G COMPONENT 2 VIDEO OUTPUT [19]  
These BNC connectors can be used to connect  
a TV or projector with BNC component video  
inputs.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front & Rear Panels—Continued  
Remote Controller  
1
N
On  
Standby  
Repeat  
Open/  
Close  
2
3
4
-
A
B
Random  
Play Mode  
Display  
O
P
Q
R
S
1
4
7
2
5
8
0
3
6
9
5
Dimmer  
Clear  
Menu  
Top Menu  
Return  
6
7
T
U
Enter  
Setup  
8
9
V
W
X
Y
Z
a
Audio Angle Subtitle Zoom  
Stop  
Play  
Pause  
Up  
J
K
L
M
Down  
TV Control  
TV/Video Channel  
On/  
Standby  
b
Volume  
-
RC 536DV  
A Standby button [22]  
H Return button [23, 27]  
This button is used to set the DPS-5.4 to Standby.  
This button is used to return to the main menu with-  
out saving your changes.  
B On button [22]  
I Audio button [36]  
This button is used to turn on the DPS-5.4.  
This button is used to select foreign language  
soundtracks and audio formats (e.g., Dolby Digital  
or DTS) on DVD-Video discs.  
For Video CDs you can select left-channel, right-  
channel, or stereo.  
C Repeat button [31]  
This button is used to set the repeat playback func-  
tions.  
D A-B button [30]  
This button is used to set the A–B Repeat Playback  
function.  
J Angle button [37]  
This button is used to select camera angles on  
DVD-Video discs.  
E Number buttons [35]  
These buttons are used to enter title, chapter, and  
track numbers and to enter times for locating spe-  
cific points in time.  
K Stop button [26]  
This button is used to stop playback.  
L Fast Reverse  
/ (  
) button [26, 29,  
F Top Menu button [27]  
This button is used to display the top menu on a  
DVD-Video disc.  
30]  
This button is used for fast reverse, reverse slow  
motion, and reverse frame-by-frame playback.  
G Cursor  
/
/
/
buttons [23]  
These buttons are used to navigate onscreen menus.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front & Rear Panels—Continued  
b TV Control buttons [53]  
M Fast Forward  
/ (  
) button [26, 29,  
30]  
TV/Video button  
Used to select TV or VCR on your TV.  
Channel –/+ buttons  
This button is used for fast forward, slow motion,  
and frame-by-frame playback.  
N Open/Close  
button [25]  
Used to select channels on your TV.  
On/Standby button  
This button is used to open and close the disc tray.  
Used to set your TV to On or Standby.  
O Random button [32]  
Volume  
/
buttons  
This button is used with the Random Playback func-  
tion.  
Used to adjust your TV’s volume.  
P Play Mode button [30]  
This button is used to open and close the Play Mode  
menu.  
Q Display button [38]  
This button is used to display information about the  
current disc, title, chapter, or track, including the  
elapsed time, remaining time, total time, and so on.  
R Dimmer button  
This button is used to adjust the display brightness.  
S Clear button [34]  
This button is used to cancel various functions.  
T Menu button [27]  
This button is used to display the menu on a  
DVD-Video disc or to open the Disc Navigator  
when using a Video CD, audio CD, WMA/MP3/  
JPEG disc, or VR format DVD-RW disc.  
U Enter button [23]  
This button is used to start playback of the selected  
title, chapter, or track, and to confirm settings.  
V Setup button [23]  
This button is used to open and close the onscreen  
setup menus.  
W Zoom button [37]  
This button is used with the Zoom function.  
X Subtitle button [36]  
This button is used to select subtitles on  
DVD-Video discs.  
Y Pause  
This button is used to pause playback.  
Z Down/Up buttons [26]  
button [26]  
/
The Down button is used to select the previous  
chapter or track. During playback it selects the  
beginning of the current chapter or track.  
The Up button is used to select the next chapter or  
track.  
a Play  
button [26]  
This button is used to start playback.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the DPS-5.4  
RCA/phono AV Connection Color Coding  
Before Making Any Connections  
RCA/phono AV connections are usually color coded:  
red, white, and yellow. Use red plugs to connect right-  
channel audio inputs and outputs (typically labeled “R”).  
Use white plugs to connect left-channel audio inputs and  
outputs (typically labeled “L”). And use yellow plugs to  
connect composite video inputs and outputs.  
• Read the manuals supplied with your AV components.  
• Don’t connect the power cord until you’ve completed  
all audio and video connections.  
Optical Digital Inputs  
The DPS-5.4’s optical digital connectors have a shutter-  
type cover that opens when an optical plug is inserted,  
and closes when it’s removed. Push the plug in all the  
way.  
Analog audio  
Right (red)  
Left (white)  
Right (red)  
Left (white)  
Composite video  
(Yellow)  
(Yellow)  
Right!  
• Push each plug in all the way to  
make a good connection (loose  
connections can cause noise or  
malfunctions).  
• To prevent interference, keep  
audio and video cables away from  
power cords and speaker cables.  
Wrong!  
AV Cables & Connectors  
Video  
P
R
B
/ CR  
P
P
R
B
/ CR  
Component video separates the luminance (Y)  
and color difference signals (PR, PB), providing  
the best picture quality. Some TV manufacturers  
label their component video inputs differently.  
The DPS-5.4 has RCA/phono and BNC compo-  
nent video outputs.  
Y
PB  
PR  
/
/
P
Y
C
B
CB  
Y
Component  
video  
PR  
/CR  
P
R
/ CR  
COMPONENT  
2
Y
P
B
PR  
/
/
PB  
C
B
P
B
CB  
Y
Y
S VIDEO  
VIDEO  
S-Video provides better picture quality than com-  
posite video.  
S-Video  
Composite video can be found on virtually all  
TVs, VCRs, and video equipment.  
Composite  
video  
Audio  
OPTICAL  
Optical digital audio connections provide better  
audio quality than analog connections.  
Optical  
digital  
COAXIAL  
AUDIO  
Coaxial digital audio connections provide better  
audio quality than analog connections.  
Coaxial  
digital  
RCA/phono analog audio connectors can be  
found on virtually all AV components.  
L
R
Analog  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the DPS-5.4—Continued  
Basic Setup  
The setup described here is a basic setup that allows you to play discs using just the AV cable supplied with the player.  
In this setup, stereo audio is played through the speakers in your TV.  
VIDEO IN  
TV  
L
R
ANALOG  
INPUT  
To power outlet  
• This player is equipped with copy protection technol-  
Important  
ogy. Do not connect this player to your TV via a VCR  
using AV cables, as the picture from this player will  
not appear properly on your TV. (This player may also  
not be compatible with some combination TV/VCRs  
for the same reason; refer to the manufacturer for more  
information.)  
• If your TV only has a mono audio input, connect it to  
the DPS-5.4’s MONO ANALOG AUDIO OUTPUT.  
• When connecting to your TV as shown above, do not  
set the “Component Out” setting (page 44) to “Pro-  
gressive.”  
• Before unplugging the player from the power outlet,  
make sure you first switch it into standby using either  
the front panel Standby/On button, or the remote con-  
troller, and wait of the “GOOD BYE” message to dis-  
appear from the player’s display.  
• For the above reasons, do not plug this player into a  
switched power supply found on some amplifiers and  
AV receivers.  
Australian model  
• When TV System is set to “AUTO” or “NTSC”, and  
playing an NTSC disc only: When “Component  
Out” (page 44) is set to “Progressive”, there is no  
video output from the “VIDEO OUTPUT” (com-  
posite) and “S VIDEO” jacks. If you want to display  
video on more than one monitor simultaneously, make  
sure that it is set to Interlace. Switch the player to  
standby then, using the front panel controls, press  
1. Connect the VIDEO OUTPUT and AUDIO OUT-  
PUT ANALOG L/R jacks to a set of A/V inputs  
on your TV.  
Use the supplied AV cable, connecting the red and  
white plugs to the audio outputs and the yellow plug  
to the video output. Make sure you match up the left  
and right audio outputs with their corresponding  
inputs for correct stereo sound.  
Standby/On while pressing  
back to “Interlace.”  
to switch the player  
North American model  
See the following page if you want to use a compo-  
nent or S-Video cable for the video connection.  
When “Component Out” (page 44) is set to “Pro-  
gressive”, there is no video output from the  
“VIDEO OUTPUT” (composite) and “S VIDEO”  
jacks. If you want to display video on more than one  
monitor simultaneously, make sure that it is set to  
Interlace. Switch the player to standby then, using the  
front panel controls, press Standby/On while pressing  
to switch the player back to “Interlace.”  
2. Connect the supplied AC power cord to the AC  
INLET, then plug into a power outlet.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the DPS-5.4—Continued  
ConnectingYour TV  
• Connect the DVD Player to the TV directly. If you  
connect the DVD Player to aVCR, TV/VCR combina-  
tion, or video selector, the playback picture may be  
distorted as DVD videos are copy protected.  
Using S-Video  
If your TV (or other equipment) has an S-Video input,  
you can use this instead of the standard (composite) out-  
put for a better quality picture.  
• Use an S-Video cable (supplied) to connect the S-  
VIDEO OUTPUT to an S-Video input on your TV (or  
monitor or AV receiver).  
COMPONENT  
VIDEO IN  
TV  
Y
PB  
PR  
• The DPS-5.4 has two S-Video output connectors.  
They output the same video signal.  
• Line up the small triangle above the jack with the same  
mark on the plug before plugging in.  
Note:  
• To set up the player for use with a progressive scan TV,  
see “Component Out” on page 44.  
Connecting to an AV Receiver  
Although you can reproduce the DVD Player’s sound  
from the TV speakers with the connections on page 18,  
connecting with an amplifier provides you high quality  
dynamic sounds.  
To reproduce Dolby Digital surround and DTS surround  
sound, you need to connect to an amplifier with a Dolby  
Digital and DTS decoder respectively.  
TV  
S VIDEO IN  
Before connecting  
• When you connect the DVD Player to the amplifier, be  
sure to turn off the power and unplug both units from  
the wall outlet before making any connections. Other-  
wise, the speakers may be damaged.  
Using Component Video  
You can use the component video output instead of the  
standard video out jack to connect this player to your TV  
(or other equipment).  
This should give you the best quality picture from the  
three types of video output available.  
• Use a component video cable (not supplied) to con-  
nect the COMPONENT VIDEO OUTPUT jacks to a  
component video input on your TV, monitor or AV  
receiver.  
• If your TV or projector has BNC component video  
inputs, use a BNC component video cable to connect  
them to the DPS-5.4’s BNC component video outputs.  
• The DPS-5.4 has two component video outputs. The  
COMPONENT 1 output uses RCA/phono connectors.  
The COMPONENT 2 output uses BNC connectors.  
They output the same video signal.  
• Connect the plugs securely.  
To enjoy surround sound you need to connect this player  
to an AV receiver using a digital output. This player has  
both coaxial and optical digital jacks; use whichever is  
convenient.  
In addition to a digital connection, we recommend also  
connecting using the stereo analog connection.  
To record the audio from a CD-R disc etc. to a cassette  
or CDR recorder that’s connected to theAV receiver, and  
when your AV receiver has Zone2, you must connect the  
DPS-5.4’s analog audio outputs to the AV receiver.  
You’ll probably also want to connect a video output to  
your AV receiver. You can use any of the video outputs  
available on this player (the illustration on next page  
shows a standard (composite) connection).  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the DPS-5.4—Continued  
1. Connect one of DIGITALAUDIO OUTPUT jacks  
on this player to a digital input on your AV  
receiver.  
3. Connect the AV receiver’s video output to a video  
input on your TV.  
Tip:  
• The DPS-5.4 has two composite video output connec-  
tors and two pairs of stereo analog audio output con-  
nectors. They output the same video and audio signals  
respectively.  
You usually have to connect the same kind of video  
cable between your DVD player and AV receiver, and  
between your AV receiver and TV.  
OPTICAL  
COAXIAL  
Connecting  
-compatible  
Components  
AV receiver  
This enables you to listen to surround sound.  
For an optical connection, use an optical cable (not sup-  
plied) to connect the “OPTICAL DIGITAL AUDIO  
OUTPUT” jack to an optical input on your AV receiver.  
For a coaxial connection, use a coaxial cable (similar to  
the supplied video cable) to connect the “COAXIAL  
DIGITAL AUDIO OUTPUT” jack to a coaxial input on  
your AV receiver.  
IN  
L
REMOTE  
CONTROL  
R
DVD  
2. Connect the analog AUDIO OUTPUT L/R and  
VIDEO OUTPUT jacks on this player to a set of  
analog audio and video inputs on your AV  
receiver.  
AV receiver  
• The remote controller supplied with Integra/Onkyo  
AV receiver or amplifiers can be used to control the  
DPS-5.4.  
• The function of the upper and lower  
the same. Connect to either one.  
AV receiver  
connectors are  
• For remote control operation, you must make an ana-  
log RCA/phono connection between your DPS-5.4  
and the AV receiver or amplifier, even if they are con-  
nected digitally.  
DVD  
IN  
FRONTL  
R
The diagram shows standard video connections, but you  
can alternatively use the S-Video or component video  
connections if they’re available.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the DPS-5.4—Continued  
Controlling AV Components that are Out of Range  
You can use the following multi-room kits to control the  
DPS-5.4 when it’s out of range of the remote controller:  
• Integra Multi-Room System (IR Remote Controller  
Extension System)  
• Multiroom AV distribution and control systems such  
as those made by Niles® and Xantech®.  
Controlling Other Out-of-range AV Components  
If another AV component is out of range of its remote  
controller, you can use a commercially available IR  
emitter to retransmit the remote controller signals  
received at the DPS-5.4’s IR IN, as shown below.  
IR receiver  
Connecting  
block  
IR IN  
IR OUT  
DPS-5.4  
IR emitter  
Remote controller  
Other  
component  
: Signal flow  
Controlling the DPS-5.4 When It’s Out of Range  
If the DPS-5.4 is located in another room, installed in a  
cabinet, or out of range of its remote controller, you can  
use a commercially available IR receiver to pickup the  
remote controller signals and feed them to the DPS-5.4,  
as shown below.  
Connect the IR emitter to the DPS-5.4’s IR OUT, and  
place the IR emitter in front of the otherAV component’s  
remote control sensor (usually located on its front  
panel), as shown below. See the instructions supplied  
with the IR emitter.  
Other component  
Remote control  
IR receiver  
Connecting  
block  
sensor  
from connecting block  
IR IN  
IR emitter  
Miniplug cable  
DPS-5.4  
Remote controller  
Miniplug  
Inside  
cabinet  
IR Emitter  
: Signal flow  
DPS-5.4  
:Signal flow  
Connect the IR receiver to the DPS-5.4 as shown below.  
Only remote controller signals received by the DPS-  
5.4’s IR IN are fed through to the IR OUT. Signals  
picked up by the DPS-5.4’s remote control sensor are not  
output.  
from connecting block  
Miniplug cable  
DPS-5.4  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the Power/Turning on the DPS-5.4  
Before connecting  
• The DPS-5.4 is shipped with the Power switch in the  
on position ( On). When the power cord is plugged  
in for the first time, the DPS-5.4 will automatically  
enter the standby state and the Standby indicator will  
light (same condition after step 2 below).  
• Make sure that all the connections on pages 17 – 21  
are complete (the connection to a TV is required).  
Press Standby/On on the DVD  
Player or On on the remote con-  
troller.  
The DVD Player turns on and the  
Standby indicator turns off.  
• To put the DVD Player in the standby  
mode, press Standby/On on the DVD  
3
Standby/On  
Player, or Standby on the remote  
controller. Be sure to set the volume  
to minimum before putting the DVD  
Standby/On  
Player in the standby mode for the  
Standby/On  
next use to avoid sudden loud sound  
reproduction.  
Open/Close  
Stop  
Play  
Pause  
Display  
Dimmer  
Play Mode  
Clear  
Standby  
Power  
On  
Off  
-
DPS 5.4  
• While the Standby indicator lights  
up, the DVD Player can receive sig-  
nals from the remote controller.  
However, if you press Power on the  
DVD Player to switch off the main  
power, the remote controller cannot  
be used to turn on the DVD Player.  
• Setting the Standby button to standby  
does not shut off the power com-  
pletely.  
Power  
Plug the supplied power cord  
into the AC INLET and then into  
the power outlet on the wall.  
• Do not use a power cord other than  
the one supplied with the DPS-5.4.  
The power cord supplied is designed  
for use with the DPS-5.4 and should  
not be used with any other device.  
• Never have the power cord discon-  
nected from the DPS-5.4 while the  
other end is plugged into the wall  
outlet. Doing so may cause an elec-  
tric shock. Always connect by plug-  
ging into the wall outlet last and  
disconnect by unplugging from the  
wall outlet first.  
1
Note:  
• This player features a screen saver and an auto power  
off function. If the player is stopped and no button is  
pressed for five minutes, the screen saver starts. If the  
disc tray is closed but no disc is playing and no control  
is pressed for 30 minutes, the player automatically  
goes into standby.  
To a wall outlet  
Press Power to switch on the  
main power.  
2
Power  
The DVD Player enters standby mode.  
The Standby indicator lights up.  
• The buttons on the remote controller  
do not operate if the Power switch is  
set to Off.  
On  
Off  
• To switch off the main power, press  
Power again.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Using the on-screen displays  
Setting up with the Setup Navigator  
For ease of use, this player makes extensive use of graph-  
ical on-screen displays (OSDs).  
Using the Setup Navigator you can make a number of  
other initial settings for this player. We recommend  
using the Setup Navigator, especially if you connected  
this player to anAV receiver for playing surround sound.  
To answer some of the questions about digital audio for-  
mats you may need to look at the instructions that came  
Make sure that you select the input on the TV (by using  
the TV remote) to view the on-screen displays.  
You should get used to the way these work as you’ll need  
to use them when setting up the player, using some of the  
playback features, such as program play, and when mak-  
ing more advanced settings for audio and video.  
All the screens are navigated in basically the same way,  
with your AV receiver.  
0
9
Clear  
/
/
/
Menu  
Top Menu  
using the cursor buttons (  
/
/
/
)to change the  
Enter  
highlighted item and pressing Enter to select it.  
Enter  
Return  
Setup  
Setup  
Audio Angle Subtitle Zoom  
Stop  
Play  
Pause  
Up  
On  
Standby  
Repeat  
Open/  
Close  
Stop  
Down  
-
A
B
Random  
Play Mode  
Display  
1
4
7
2
5
8
0
3
6
9
Dimmer  
If a disc is playing, press Stop ( ).  
Stop  
1
2
3
Clear  
/
/
/
Menu  
Top Menu  
Return  
Enter  
Enter  
Setup  
Return  
Stop  
Setup  
Turn on your TV and make sure  
that you select the input on theTV  
(by using the TV remote) to view  
the setup navigator.  
Audio Angle Subtitle Zoom  
Stop  
Play  
Pause  
Up  
Down  
Press Setup.  
The on-screen display (OSD) appears.  
Note:  
Setup  
Throughout this manual, “Select” means use the cur-  
sor buttons to highlight an item on-screen, then press  
Enter.  
HOME MENU  
DVD  
Audio Settings  
Play Mode  
Video Adjust  
Disc Navigator  
Setup Navigator  
Button  
Setup  
What it does  
Initial Settings  
Display/exit the on-screen display.  
Select “Setup Navigator.”  
4
5
HOME MENU  
DVD  
Enter  
Changes the highlighted menu item.  
Audio Settings  
Play Mode  
Video Adjust  
Disc Navigator  
Setup Navigator  
Selects the highlighted menu item  
(both Enter buttons work in exactly the  
same way).  
Initial Settings  
Enter  
Select a DVD language.  
Return  
Returns to the main menu without sav-  
ing changes.  
Some DVD discs feature on-screen  
menus, soundtracks and subtitles in sev-  
eral languages. Set your preferred lan-  
guage here.  
Setup Navigator  
Language Settings  
Audio Out Settings  
AV Receiver Func.  
DVD Language  
English  
French  
German  
Italian  
Spanish  
Other Language  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started—Continued  
Is your AV receiver DTS compati-  
ble?  
The available languages vary between  
models.  
9
Select “Compatible,” “Not Compatible”  
or “Don’t Know.”  
North American model: English, French,  
Spanish, German, Italian, Other Language.  
Australian model: English, French, Span-  
ish, Chinese (traditional), Other Language.  
Setup Navigator  
Language Settings  
Dolby Digital  
Compatible  
Audio Out Settings DTS  
AV Receiver Func.  
Not Compatible  
Don't Know  
• Note that the language you choose  
here may not be available on all discs.  
• If you want to select a language other  
than those listed, select “Other Lan-  
guage.” See “Selecting languages  
using the language code list” on  
Notes:  
• If you set the player to DTS on a non-  
DTS compatible disc, you will have no  
sound outputting because the disc is  
not have a DTS soundtrack.  
• When a DVD disc is loaded into the  
DVD player, the disc would default to  
Dolby digital format. For DTS play-  
back you would need to select DTS in  
the table of contents of the movie.  
Usually in “Language” or in “Audio  
Setup”.  
page 50 for detailed information.  
Did you connect this player to an  
amplifier or AV receiver?  
Select “Connected” or “Not Connected.”  
6
7
Setup Navigator  
Language Settings  
Audio Out Settings  
AV Receiver Func.  
AV Receiver  
Connected  
Not Connected  
Is your AV receiver MPEG compat-  
ible?  
Select “Compatible,” “Not Compatible”  
or “Don’t Know.”  
10  
11  
12  
• If you selected “Not Connected” here,  
that completes setup using the Setup  
Navigator. Press Enter to exit.  
Setup Navigator  
Did you connect this player to an  
AV receiver using a digital output?  
Select “Connected” or “Not Connected.”  
Language Settings  
Audio Out Settings DTS  
AV Receiver Func. MPEG  
Dolby Digital  
Compatible  
Not Compatible  
Don't Know  
Setup Navigator  
Language Settings  
AV Receiver  
Connected  
Audio Out Settings Digital Audio Out  
AV Receiver Func.  
Not Connected  
Is your AV receiver compatible  
with 96 kHz Linear PCM audio?  
Select “Compatible,” “Not Compatible”  
or “Don’t Know.”  
• If you selected “Not Connected” here,  
that completes setup using the Setup  
Navigator. Press Enter to exit.  
Setup Navigator  
Language Settings  
Audio Out Settings DTS  
AV Receiver Func. MPEG  
96kHz Linear PCM  
Dolby Digital  
Compatible  
Not Compatible  
Don't Know  
Is your AV receiver Dolby Digital  
compatible?  
Select “Compatible,” “Not Compatible”  
or “Don’t Know.”  
8
Press Enter to complete the setup,  
or press Setup to quit the Setup  
Navigator without making any  
changes.  
Setup Navigator  
Language Settings  
Audio Out Settings  
AV Receiver Func.  
Dolby Digital  
Compatible  
Not Compatible  
Don't Know  
Setup Navigator  
Language Settings  
Audio Out Settings DTS  
AV Receiver Func. MPEG  
96kHz Lin
Dolby Digital  
Compatible  
le  
Settings complete  
Press ENTER to exit  
ENTER  
Congratulations, setup is complete!  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started—Continued  
Playing discs  
Load a disc.  
3
Load a disc with the label side facing up,  
using the disc tray guide to align the disc  
(if you’re loading a double-sided DVD  
disc, load it with the side you want to  
play face down).  
The basic playback controls for playing DVD,  
CD, Video CD and WMA/MP3/JEPG discs are covered  
here.  
Standby/On  
Open/Close Play  
Standby/On  
Open/Close  
Stop  
Play  
Pause  
Display  
Dimmer  
Play Mode  
Standby  
Power  
Clear  
On  
Off  
-
DPS 5.4  
On  
Standby  
Repeat  
Open/  
Close  
On  
Open/  
Close  
-
A
B
Random  
Play Mode  
Display  
1
4
7
2
5
8
0
3
6
9
Dimmer  
Press Play ( ) to start playback.  
If you’re playing a DVD or Video CD, a  
menu may appear. See “DVD-Video disc  
menus” on page 27 and “Video CD PBC  
menus” on page 27 for more on how to  
navigate these.  
4
Clear  
Play  
Menu  
Top Menu  
Return  
Enter  
Setup  
Audio Angle Subtitle Zoom  
Stop  
Play  
Pause  
Up  
If you’re playing an WMA/MP3 disc, it  
may take a few seconds before playback  
starts, depending on the complexity of  
the file structure on the disc.  
Remote  
controller  
Play  
Down  
Play  
If you loaded a CD/CD-R/RW contain-  
ing JPEGs, a slideshow will start. See  
“Viewing JPEG discs” on page 39 for  
more on playing these discs.  
• See also “PhotoViewer” on page 48 if  
the disc contains both WMA/MP3  
audio files and JPEG picture files (by  
default, you will not be able to play the  
WMA/MP3 files).  
If the player isn’t already on, press  
DVD player’s Standby/On or the  
remote controller’s On to switch it  
on.  
If you’re playing a DVD or Video CD,  
also turn on your TV and make sure that  
it is set to the correct video input.  
1
2
Standby/On  
Remote  
controller  
On  
Press Open/Close to open the disc  
tray.  
Open/Close  
Remote  
controller  
Open/  
Close  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started—Continued  
Front panel controls  
Basic playback controls  
The table below shows the basic controls on the remote  
controller for playing discs.  
Pause  
Play  
Standby/On  
Open/Close  
Pause  
Stop  
Play  
Display  
Dimmer  
Play Mode  
Clear  
Standby  
Power  
On  
Off  
On  
Standby  
Repeat  
-
DPS 5.4  
Open/  
Close  
-
A
B
Random  
Play Mode  
Display  
/
Stop  
1
4
7
2
5
8
0
3
6
9
Numbers  
Dimmer  
The Play, Stop, and Pause buttons on the front panel  
work in exactly the same way as their remote control  
buttons on the  
front panel work slightly differently from the remote but-  
tons.  
Clear  
Menu  
Top Menu  
Return  
equivalents. The combined  
/
Enter  
Setup  
Audio Angle Subtitle Zoom  
Press and hold for fast scan; press for track/chapter skip.  
See Front panel on page 12 for the location and descrip-  
tion of all the front panel controls for your model.  
Play  
Pause  
Down  
Stop  
Play  
Pause  
Up  
Stop  
/
Down  
Up  
/
Notes:  
You may find with some DVD discs that some play-  
back controls don’t work in certain parts of the disc.  
This is not a malfunction.  
Button  
What it does  
Starts playback.  
• Track skip and number buttons for track selection do  
not work with unfinalized CD-R/RW discs.  
DVD and Video CD: If the display shows  
RESUME or LAST MEM playback starts  
from the resume or last memory point  
(see also “Resume and Last Memory”  
right colum.)  
Resume and Last Memory  
Pauses a disc that’s playing, or restarts a  
paused disc.  
When you stop playback of a DVD or Video CD disc,  
“RESUME” is shown in the display indicating that you  
can resume playback again from that point.  
If the disc tray is not opened, the next time you start play-  
back the display shows “RESUME” and playback  
resumes from the resume point.  
For DVD discs only: If you take the disc out of the  
player, the play position is stored in memory. When you  
load the disc next time, the display shows “LAST MEM”  
and you can resume playback (this works for up to five  
discs).  
Stops playback.  
DVD and Video CD: Display shows  
RESUME. Press Stop ( ) again to cancel  
the resume function (see also “Resume  
and Last Memory” right colum).  
Press to start fast reverse scanning.  
Press Play ( ) to resume normal play-  
back.  
Press to start fast forward scanning.  
If you want to clear the resume/last memory point, press  
Stop ( ) while “RESUME” or “LAST MEM” is dis-  
played.  
Press Play ( ) to resume normal play-  
back.  
Skips to the start of the current track or  
chapter, then to previous tracks/chapters.  
While the Resume function is active,  
pressing this button starts playback from  
the beginning of the title (DVD) or the first  
track (VCD).  
Notes:  
• When a Video CD is loaded, the Resume point is lost  
if the player is switched off or the disc tray opened.  
• For the Last Memory function to work, you must press  
Stop ( ) to stop playback before opening the disc tray.  
• The Last Memory function doesn’t work with VR for-  
mat DVD-RW discs.  
Skips to the next track or chapter.  
Use to enter a title, chapter, or track num-  
ber.  
Press Enter to select (or wait a few sec-  
onds).  
Numbers • If the disc is stopped, playback starts  
from the selected title (for DVD) or track  
number (for CD/Video CD/WMA/MP3 ).  
• If the disc is playing, playback jumps to  
the start of the selected chapter or track.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started—Continued  
DVD-Video disc menus  
Video CD PBC menus  
On  
Standby  
Repeat  
On  
Standby  
Repeat  
Open/  
Close  
Open/  
Close  
-
-
A
B
Random  
Play Mode  
Display  
A
B
Random  
Play Mode  
Display  
1
4
7
2
5
8
0
3
1
4
7
2
5
8
0
3
6
9
6
9
Numbers  
Numbers  
Return  
Dimmer  
Dimmer  
/
/
/
Clear  
Clear  
Menu  
Menu  
Top Menu  
Return  
Top Menu  
Return  
Top Menu  
Return  
Menu  
Enter  
Enter  
Setup  
Setup  
Enter  
Down  
Enter  
Audio Angle Subtitle Zoom  
Audio Angle Subtitle Zoom  
Stop  
Play  
Pause  
Up  
Stop  
Play  
Pause  
Up  
Down  
Down  
Up  
/
Many DVD-Video discscontain menus from which you  
can select what you want to watch. They may give access  
to additional features, such as subtitle and audio lan-  
guage selection, or special features such as slideshows.  
See the disc packaging for details.  
Sometimes DVD-Video menus are displayed automati-  
cally when you start playback; others only appear when  
you press Menu or Top Menu.  
Some Video CDshave menus from which you can  
choose what you want to watch. These are called PBC  
(Playback control) menus.  
You can play a PBC Video CD without having to navi-  
gate the PBC menu by starting playback using a number  
button to select a track, rather than the Play ( ) button.  
Button  
Return  
What it does  
Displays the PBC menu.  
Button  
What it does  
Use to enter a numbered menu option.  
Press Enter to select.  
Numbers  
Displays the “top menu” of a DVD  
disc—this varies with the disc.  
Top Menu  
Displays the previous menu page (if  
there is one).  
Displays a DVD disc menu—this var-  
ies with the disc and may be the same  
as the “top menu.”  
Menu  
Displays the next menu page (if there  
is one).  
Moves the cursor around the screen.  
Selects the current menu option.  
/
/
/
Enter  
Returns to the previously displayed  
menu screen.  
Return  
Highlights a numbered menu option  
(some discs only). Press Enter to  
select.  
Numbers  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Introduction  
Disc Navigator  
Title 1-10  
Chapter 1-3  
Most of the features described in this chapter make use  
of on-screen displays. For an explanation of how to nav-  
igate these, see “Using the on-screen displays” on  
page 23.  
Many of the functions covered in this chapter apply to  
DVD discs, Video CDs, CDs and WMA/MP3/JPEG  
discs, although the exact operation of some varies  
slightly with the kind of disc loaded.  
Some DVD discs restrict the use of some functions (ran-  
dom or repeat, for example). This is not a malfunction.  
When playing Video CDs, some of the functions are not  
available during PBC playback. If you want to use them,  
start the disc playing using a number button to select a  
track.  
DVD  
Title 01  
Title 02  
Title 03  
Title 04  
Title 05  
Title 06  
Title 07  
Title 08  
Chapter 001  
Chapter 002  
Chapter 003  
For a VR (Video Recording) mode DVD-  
RW disc select beween the “Playlist” and  
“Original” areas of the disc, or a title.  
Press  
title.  
(cursor right) to preview the  
• It’s not possible to switch between  
“Original” and “Playlist” during play-  
back.  
• Not all VR format DVD-RW discs  
have a Playlist.  
Using the Disc Navigator to browse  
the contents of a disc  
Disc Navigator  
Title(1-03)  
DVD-RW  
Original  
01. 3/31 FIRST LEAGUE  
02. 4/28 SECOND LEAGUE  
03. 4/29 FINAL ROUND  
Play List  
Use the Disc Navigator to browse through the contents  
of a disc to find the part you want to play.You can use the  
Disc Navigator when a disc is playing or stopped.  
0
9
The screen for CDs and Video CDs  
shows a list of tracks.  
Clear  
/
/
/
Menu  
Top Menu  
Return  
Disc Navigator  
Track 1-10  
Enter  
Enter  
Setup  
CD  
Track 01  
Track 02  
Track 03  
Track 04  
Track 05  
Track 06  
Track 07  
Track 08  
Setup  
Audio Angle Subtitle Zoom  
Stop  
Play  
Pause  
Up  
Down  
The screen for anWMA/MP3 disc shows  
the folder names on the left and the track  
names on the right (note that if there are  
more than 16 folders or names that con-  
tain accented or non-roman characters,  
tracks and folders may show up with  
generic names “-F_033”, “T_035”, etc.).  
Select a folder, or a track within a folder.  
Press Setup and select “Disc Nav-  
igatorfrom the on-screen display.  
Alternatively, if a VR format DVD-RW,  
CD, Video CD or WMA/MP3/JPEG disc  
is loaded, you can press Menu, which  
takes you straight to the Disc Navigator  
screen.  
1
Setup  
HOME MENU  
DVD  
Disc Navigator  
Folder 1-17  
Track 1-10  
WMA/MP3  
Audio Settings  
Video Adjust  
001. ACP  
002. Nth Degree  
003. Pfeuti  
001. Gravity deluxe  
002. Tesla's patent  
003. Border dispute  
004. Delayed by rain  
005. Accident incident  
006. Pigeon post  
004. Live  
Play Mode  
Disc Navigator  
Setup Navigator  
005. Glitch music  
006. CodHead  
007. Thermo  
008. Missing Man  
007. Outernational  
008. Vacuum tube  
Initial Settings  
Playback starts after you press Enter.  
Select what you want to play.  
Depending on the type of disc you have  
loaded, the Disc Navigator looks slightly  
different.  
2
Tips:  
• The Disc Navigator is not available unless there is a  
disc loaded.  
• It’s not possible to use the Disc Navigator when play-  
ing a Video CD in PBC mode, or an unfinalized CD-  
R/RW disc.  
• Another way to find a particular place on a disc is to  
use one of the search modes. See “Searching a disc”  
on page 35.  
The screen for DVD discs shows the  
titles on the left and the chapters on the  
right. Select a title, or a chapter within a  
title.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs—Continued  
Scanning discs  
Playing in slow motion  
You can fast-scan discs forward or backward at various  
different speeds.  
You can play DVDs and Video CDs at four different for-  
ward slow motion speeds. DVD-Video discs can also be  
played at two reverse speeds. (With Video CDs and VR  
format DVD-RWs, you can only use forward slow  
motion playback.)  
On  
Standby  
Repeat  
Open/  
Close  
-
A
B
Random  
Play Mode  
Display  
1
4
7
2
5
8
0
3
On  
Standby  
Repeat  
6
9
Open/  
Close  
Dimmer  
-
A
B
Random  
Play Mode  
Display  
Clear  
1
4
7
2
5
8
0
3
Menu  
Top Menu  
Return  
6
9
Dimmer  
Enter  
Setup  
Clear  
Menu  
Top Menu  
Return  
Audio Angle Subtitle Zoom  
Play  
Stop  
Play  
Pause  
Up  
Enter  
Setup  
Down  
/
Audio Angle Subtitle Zoom  
Play  
Pause  
Stop  
Play  
Pause  
Up  
Down  
/
During playback, press  
to start scanning.  
or  
1
2
During playback, press Pause ( ).  
1 Pause  
Press repeatedly to increase the  
scanning speed.  
• WMA/MP3 tracks can only be  
scanned at one speed.  
• The scanning speed is shown on-  
Press and hold  
or  
or  
2
3
until slow motion playback starts.  
• The slow motion speed is shown  
onscreen.  
• There is no sound during slow motion  
playback.  
screen (i.e., Scan1  
).  
To resume normal playback, press  
Play ( ).  
• Sound can be heard while scanning  
audio CDs and MP3 discs.  
3
Play  
Press repeatedly to change the  
slow motion speed.  
• There is no sound while scanning  
DVDs, Video CDs and WMA discs,  
and no subtitles while scanning DVDs.  
• When scanning a Video CD or WMA/  
MP3 track, playback automatically  
resumes at the end or beginning of the  
track.  
• Depending on the disc, normal play-  
back may automatically resume when  
a new chapter is reached on a DVD  
disc.  
• The slow motion speed is displayed  
onscreen.  
To resume normal playback, press  
Play ( ).  
4
Play  
Notes:  
• The picture quality during slow  
motion playback is not as good as dur-  
ing normal playback.  
• Depending on the disc, normal play-  
back may automatically resume when  
a new chapter is reached.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs—Continued  
Frame advance/frame reverse  
Looping a section of a disc  
You can advance or back up a DVD disc frame-by-  
frame. With Video CDs and VR format DVD-RWs, you  
The A-B Repeat function allows you to specify two  
points (A and B) within a track (CD and Video CD) or  
title (DVD) that form a loop which is played over and  
over.  
can only use frame advance.  
0
Clear  
Note:  
Menu  
Top Menu  
You can’t use A-B Repeat with WMA/MP3 discs,  
Video CDs in PBC 1mode, or unfinalized CD-R/RW  
discs.  
Enter  
Return  
Setup  
Audio Angle Subtitle Zoom  
Play  
Pause  
Stop  
Play  
Pause  
Up  
Down  
On  
Standby  
Repeat  
Open/  
Close  
/
-
A
B
Random  
Play Mode  
Display  
A-B  
1
4
7
2
5
8
0
3
Play Mode  
6
9
Dimmer  
During playback, press Pause ( ).  
1 Pause  
Clear  
/
/
/
Menu  
Top Menu  
Return  
Enter  
Setup  
Enter  
Audio Angle Subtitle Zoom  
Press  
or  
to reverse  
2
3
Stop  
Play  
Pause  
Up  
or advance a frame at a time.  
Down  
During playback, press Play Mode  
and select “A-B Repeat” from the  
list of functions on the left.  
To resume normal playback, press  
Play ( ).  
1
Play  
Play Mode  
Tips:  
Play Mode  
• The picture quality when using frame  
reverse is not as good as frame  
advance.  
A-B Repeat  
Repeat  
A(Start Point)  
B(End Point)  
Off  
Random  
Program  
• Depending on the disc, normal play-  
back may automatically resume when  
a new chapter is reached.  
Search Mode  
• When changing direction with a DVD  
disc, the picture may “move” in an  
unexpected way. This is not a malfunc-  
tion.  
Press Enter on “A (Start Point)” to  
set the loop start point.  
2
Play Mode  
Enter  
A-B Repeat  
Repeat  
A(Start Point)  
B(End Point)  
Off  
Random  
Program  
Search Mode  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs—Continued  
During playback, press Play Mode  
and selectRepeatfrom the list of  
functions on the left.  
Press Enter on “B (End Point)” to  
set the loop end point.  
1
Play Mode  
3
Play Mode  
Enter  
Play Mode  
A-B Repeat  
Repeat  
A(Start Point)  
B(End Point)  
Off  
A-B Repeat  
Repeat  
Title Repeat  
Chapter Repeat  
Repeat Off  
Random  
Program  
Random  
Search Mode  
Program  
Search Mode  
After pressing Enter, playback jumps  
back to the start point and plays the loop.  
• The minimum loop time is 2 seconds.  
Select a repeat play option.  
If program play is active, select “Pro-  
gram Repeat” to repeat the program list,  
or “Repeat Off” to cancel.  
For DVD discs, select “Title Repeat” or  
“Chapter Repeat” (or “Repeat Off”).  
2
To resume normal playback,select  
“Off” from the menu.  
4
Using the A-B button  
Play Mode  
With the A-B button you can qucikly set the A-B Repeat  
function. Simply press the A-B button to set the A point.  
“A” appears on the display. Pres the A-B button again to  
set the B point. “B” appears on the display and A-B  
repeat playback starts. To cancel A-B repeat playback,  
press the Clear button.  
A-B Repeat  
Repeat  
Title Repeat  
Chapter Repeat  
Repeat Off  
Random  
Program  
Search Mode  
For CDs and Video CDs, select “Disc  
Repeat” or “Track Repeat” (or “Repeat  
Off”).  
Using repeat play  
Play Mode  
There are various repeat play options, depending on the  
kind of disc loaded. It’s also possible to use repeat play  
together with program play to repeat the tracks/chapters  
in the program list (see “Creating a program list” on  
page 33).  
A-B Repeat  
Repeat  
Disc Repeat  
Track Repeat  
Repeat Off  
Random  
Program  
Search Mode  
Note:  
You can’t use Repeat play with Video CDs in PBC  
mode, or unfinalized CD-R/RW discs.  
For WMA/MP3 discs, select “Disc  
Repeat”, “Folder Repeat” or “Track  
Repeat” (or “Repeat Off”).  
Play Mode  
On  
Standby  
Repeat  
Open/  
Close  
-
A-B Repeat  
Repeat  
Disc Repeat  
Folder Repeat  
Track Repeat  
Repeat Off  
A
B
Random  
Play Mode  
Display  
Repeat  
Random  
1
4
7
2
5
8
0
3
Play Mode  
Program  
Search Mode  
6
9
Dimmer  
Clear  
/
/
/
Menu  
Top Menu  
Return  
Using the Repeat Button  
Enter  
Setup  
Enter  
With the Repeat button you can quickly set the Repeat  
Playback function. Press Repeat repeatedly to select one  
of the repeat options. Repeat playback starts when the  
current title, chapter, or track has finished playing.  
To cancel repeat playback, press Clear.  
Audio Angle Subtitle Zoom  
Notes:  
You can’t use repeat and random play at the same  
time.  
• If you switch camera angle during repeat play, repeat  
play is canceled.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs—Continued  
Using random play  
For WMA/MP3 discs, select “Random  
All” (all folders) or “Random Track”  
(current folder only), (or “Random Off”).  
Use the random play function to play titles or chapters  
(DVD-Video) or tracks (CD, Video CD and WMA/MP3  
discs) in a random order.  
Play Mode  
You can set the random play option when a disc is play-  
ing or stopped.  
You can’t use random play with VR format DVD-RW  
discs, Video CDs playing in PBC mode, or while a  
DVD disc menu is being displayed.  
A-B Repeat  
Repeat  
Random All  
Random Track  
Random Off  
Random  
Program  
Search Mode  
Using the Random Button  
On  
Standby  
Repeat  
Open/  
Close  
With the Random button you can quickly set the Random  
Playback function. Press Random repeatedly to select  
one of the random options. Pess Enter, the random play-  
back starts.  
-
A
B
Random  
Play Mode  
Display  
Random  
Play Mode  
1
4
7
2
5
8
0
3
6
9
Dimmer  
To cancel random playback, press Clear.  
Clear  
Clear  
/
/
/
Menu  
Top Menu  
Return  
Tips:  
• To stop the disc and cancel random playback, press  
Stop ( ) .  
Enter  
Setup  
Enter  
• To cancel random playback without stopping play-  
back, press Clear. The disc will play to the end, then  
stop.  
Audio Angle Subtitle Zoom  
Up  
Down  
• During random play, the  
tion a little differently to normal:  
and  
buttons func-  
returns to the  
Press Play Mode and select “Ran-  
dom” from the list of functions on  
the left.  
1
Play Mode  
beginning of the current track/chapter. You can’t go  
back further than this. selects another track/chap-  
ter at random from those remaining.  
You can’t use random play together with program or  
repeat play.  
Play Mode  
A-B Repeat  
Repeat  
Random Title  
Random Chapter  
Random Off  
Random  
Program  
Search Mode  
Select a random play option.  
For DVD discs, select “Random Title” or  
“Random Chapter,” (or “Random Off”).  
2
Play Mode  
A-B Repeat  
Repeat  
Random Title  
Random Chapter  
Random Off  
Random  
Program  
Search Mode  
For CDs and Video CDs, select “On” or  
“Off” to switch random play on or off.  
Play Mode  
A-B Repeat  
Repeat  
On  
Off  
Random  
Program  
Search Mode  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs—Continued  
Creating a program list  
For a DVD disc, you can add a whole  
title, or a chapter within a title to the pro-  
gram list.  
This feature lets you program the play order of titles/  
chapters/folders/tracks on a disc.  
You can’t use Program play withVR format DVD-RW  
discs, Video CDs playing in PBC mode, or while a  
DVD disc menu is being displayed.  
• To add a title, select the title.  
Program  
Program Step  
Title 1~38  
Chapter 1~4  
01. 01  
02.  
Title 01  
Title 02  
Title 03  
Title 04  
Title 05  
Title 06  
Title 07  
Title 08  
Chapter 001  
Chapter 002  
Chapter 003  
Chapter 004  
03.  
04.  
05.  
06.  
On  
Standby  
Repeat  
Open/  
Close  
07.  
-
08.  
A
B
Random  
Play Mode  
Display  
1
4
7
2
5
8
0
3
Play Mode  
• To add a chapter, first highlight the  
title, then press (cursor right) and  
select a chapter from the list.  
6
9
Dimmer  
Clear  
/
/
/
Menu  
Top Menu  
Return  
Program  
Program Step  
Title 1-38  
Chapter 1-4  
Enter  
01. 01-003  
02.  
Title 01  
Title 02  
Title 03  
Title 04  
Title 05  
Title 06  
Title 07  
Title 08  
Chapter 001  
Chapter 002  
Chapter 003  
Chapter 004  
Setup  
Enter  
Play  
03.  
04.  
Audio Angle Subtitle Zoom  
05.  
06.  
Stop  
Play  
Pause  
Up  
07.  
08.  
Down  
For a CD or Video CD, select a track to  
add to the program list.  
Program  
Press Play Mode and select “Pro-  
gramfrom the list of functions on  
the left.  
1
Play Mode  
Program Step  
Track 1~12  
01. 04  
02.  
Track 01  
Track 02  
Track 03  
Track 04  
Track 05  
Track 06  
Track 07  
Track 08  
03.  
04.  
Play Mode  
05.  
06.  
07.  
A-B Repeat  
Repeat  
Create/Edit  
08.  
Playback Start  
Playback Stop  
Program Delete  
Program Memory  
Random  
Program  
Search Mode  
Off  
For an WMA/MP3 disc, you can add a  
whole folder, or a track within a folder to  
the program list.  
• To add a folder, select the folder.  
SelectCreate/Editfrom the list of  
program options.  
2
Program  
Program Step  
Folder 1-6  
Track 1-10  
01. 001  
02.  
001. ACP  
001. Gravity deluxe  
002.Tesla's patent  
003. Border dispute  
004. Delayed by rain  
005. Accident incident  
006. Pigeon post  
Play Mode  
002. Nth Degree  
003. Pfeuti  
03.  
A-B Repeat  
Repeat  
Create/Edit  
04.  
004. Live  
Playback Start  
Playback Stop  
Program Delete  
Program Memory  
05.  
005. Glitch music  
006. CodHead  
06.  
Random  
07.  
007. Outernational  
008. Vacuum tube  
Program  
08.  
Search Mode  
Off  
• To add a track, first find the folder, then  
press (cursor right) and select a  
track name from the list.  
The Program edit screen that appears  
depends on the kind of disc loaded.  
On the left side is the program list, then  
to the right is a list of titles (if a DVD disc  
is loaded), tracks (for CDs and Video  
CDs), or folder names (for WMA/MP3  
discs). On the far right is a list of chapters  
(for DVD) or track names (for WMA/  
MP3).  
Program  
Program Step  
Folder 1-6  
Track 1-10  
01. 001-003  
001. ACP  
001. Gravity deluxe  
002.Tesla's patent  
003. Border dispute  
004. Delayed by rain  
005. Accident incident  
006. Pigeon post  
02.  
03.  
04.  
05.  
06.  
07.  
08.  
002. Nth Degree  
003. Pfeuti  
004. Live  
005. Glitch music  
006. CodHead  
007. Outernational  
008. Vacuum tube  
After pressing Enter to select the title/  
chapter/folder/track, the program step  
number automatically moves down one.  
Select a title, chapter, folder or  
track for the current step in the  
program list.  
3
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs—Continued  
Editing a program list  
Repeat step 3 to build up a pro-  
gram list.  
A program list can contain up to 24 titles/  
chapters/folders/tracks.  
4
5
After creating a program list, you can add, delete and  
change steps.  
To play the program list, press  
(play).  
Program play remains active until you  
turn off program play (see below), erase  
the program list (see below), eject the  
disc or switch off the player.  
On  
Standby  
Repeat  
Open/  
Close  
-
A
B
Random  
Play Mode  
Display  
Play  
1
4
7
2
5
8
0
3
Play Mode  
Clear  
6
9
Dimmer  
Clear  
Menu  
Top Menu  
Return  
Tips:  
/
/
/
Enter  
• To save your program list and exit the program edit  
screen without starting playback, press Play Mode or  
Setup. (Don’t press Return—your program list won’t  
be saved.)  
Setup  
Enter  
Audio Angle Subtitle Zoom  
Stop  
Play  
Pause  
• During program play, press  
to skip to the next  
program step; press  
program step.  
• Press Clear during playback to switch off program  
play. Press while stopped to erase the program list.  
to go back to the previous  
Press Play Mode and select “Pro-  
gramfrom the list of functions on  
the left.  
1
Play Mode  
SelectCreate/Editfrom the list of  
program options.  
2
3
To clear a step, highlight the step  
number and press Clear.  
Clear  
To insert a step in the middle of the  
program list, highlight the step  
where you want the new step to  
appear, then select a title/chapter/  
folder/track to add.  
4
5
After pressing Enter, the new step is  
inserted into the list.  
To add a step to the end of the pro-  
gram list, highlight the next free  
step then select a title/chapter/  
folder/track to add.  
Tips:  
• To save your program list and exit the program edit  
screen without starting playback, press Play Mode or  
Setup.  
• If you want to exit the program edit screen without  
saving the changes you made, press Return.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs—Continued  
Other functions available from the  
program menu  
Searching a disc  
You can search DVD discs by title or chapter number, or  
by time. CDs can be searched by track number, and  
Video CDs by track number or time. WMA/MP3 discs  
can be searched by folder or track number.  
As well as creating and editing a program list, you can  
start program play, cancel program play, erase the pro-  
gram list, and memorize a program list from the Play  
Mode menu.  
On  
Standby  
e  
-
t  
A
B
Random  
Play Mode  
Display  
1
4
7
2
5
8
0
3
Play Mode  
6
9
Numbers  
Dimmer  
Menu  
On  
Standby  
Repeat  
Open/  
Close  
-
A
B
Random  
Play Mode  
Display  
/
/
/
Clear  
Top Menu  
Return  
1
4
7
2
5
8
0
3
Play Mode  
6
9
Enter  
Dimmer  
Setup  
Enter  
Clear  
Audio Angle Subtitle Zoom  
/
/
/
Menu  
Top Menu  
Return  
Enter  
Setup  
Press Play Mode and select  
“Search Mode” from the list of  
functions on the left.  
The search options that appear depend on  
the kind of disc loaded. The screen below  
shows the DVD search options.  
Enter  
1
Play Mode  
Audio Angle Subtitle Zoom  
Play  
Pause  
Press Play Mode and select “Pro-  
gramfrom the list of functions on  
the left.  
1
Play Mode  
Play Mode  
A-B Repeat  
Repeat  
Title Search  
Play Mode  
Chapter Search  
Time Search  
Random  
Program  
A-B Repeat  
Repeat  
Create/Edit  
Search Mode  
Playback Start  
Playback Stop  
Program Delete  
Program Memory  
Random  
Program  
Search Mode  
Off  
Select a search mode.  
2
Select a program play function.  
Create/Edit—See above  
Playback Start—Starts playback of a  
saved program list  
Playback Stop—Turns off program  
play, but does not erase the program  
list  
Program Delete—Erases the program  
list and turns off program play  
Program Memory (DVD only)—  
Select “On” to save the program list  
for the disc loaded. (Select “Off” to  
cancel the program memory for the  
disc loaded)  
Use the number buttons to enter a  
title, chapter, folder or track num-  
ber, or a time.  
2
3
1
4
7
2
5
8
0
3
6
9
Play Mode  
A-B Repeat  
Repeat  
Title Search  
Input Chapter  
Chapter Search  
Time Search  
0
0
1
Random  
Program  
Search Mode  
• For a time search, enter the number of  
minutes and seconds into the currently  
playing title (DVD) or track (Video  
CD) you want playback to resume  
from. For example, press 4, 5, 0, 0 to  
have playback start from 45 minutes  
into the disc. For 1 hour, 20 minutes  
and 30 seconds, press 8, 0, 3, 0.  
Notes:  
• Program lists are saved for the DVD disc loaded.  
When you load a disc with a saved program list, pro-  
gram play is automatically turned on.  
You can save program lists for up to 24 discs. After  
that, the oldest one is replaced with the new one saved.  
Press Enter to start playback.  
4
Enter  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs—Continued  
Notes:  
Switching VR format DVD-RW audio  
channel  
• The disc must be playing in order to use time search.  
• Search functions are not available with Video CDs in  
PBC mode, or unfinalized CD-R/RW discs.  
When playing aVR format DVD-RW disc recorded with  
dual-mono audio, you can switch between the main, sub,  
and mixed channels during playback.  
Switching subtitles  
Some DVD discs have subtitles in one or more lan-  
guages; the disc box will usually tell you which subtitle  
languages are available.  
Enter  
Return  
Setup  
Audio Angle Subtitle Zoom  
Audio  
Stop  
Play  
Pause  
Up  
You can switch subtitle language during playback.  
Down  
Enter  
Return  
Setup  
Audio Angle Subtitle Zoom  
Press Audio repeatedly to select  
an audio channel option.  
Subtitle  
Audio  
Stop  
Play  
Pause  
Up  
Down  
Audio  
1L  
Dolby Digital 1+1CH  
Press Subtitle repeatedly to select  
a subtitle option.  
Subtitle  
Switching audio channel when  
playing a Video CD  
Current / Total  
Subtitle  
1/2  
English  
When playing a Video CD, you can switch between ste-  
reo, just the left channel or just the right channel.  
Notes:  
• Some discs only allow you to change subtitle language  
from the disc menu. Press Top Menu to access.  
• To set subtitle preferences, see “Subtitle Language”  
on page 45.  
Enter  
Return  
Setup  
Audio Angle Subtitle Zoom  
Audio  
Stop  
Play  
Pause  
Up  
Down  
Switching DVD audio language  
When playing a DVD disc recorded with dialog in two or  
more languages, you can switch audio language during  
playback.  
Press Audio repeatly to select an  
audio channel option.  
Audio  
Enter  
Audio  
Stereo  
Return  
Setup  
Audio Angle Subtitle Zoom  
Audio  
Stop  
Play  
Pause  
Up  
Down  
Press Audio repeatedly to select  
an audio language option.  
Audio  
Current /Total  
Audio  
1/2  
French  
Dolby Digital 3/2.1CH  
Notes:  
• Some discs only allow you to change audio language  
from the disc menu. Press Top Menu to access.  
• To set audio language preferences, see “Audio Lan-  
guage” on page 45.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs—Continued  
Zooming the screen  
Switching camera angles  
Using the zoom feature you can magnify a part of the  
screen by a factor of 2 or 4, while watching a DVD or  
Video CD.  
Some DVD discs feature scenes shot from two or more  
angles—check the disc box for details.  
When a multi-angle scene is playing, a  
icon appears  
Menu  
Top Menu  
on screen to let you know that other angles are available  
(this can be switched off if you prefer—see “Angle Indi-  
cator” on page 46).  
Enter  
Return  
Setup  
Return  
Audio Angle Subtitle Zoom  
Zoom  
Stop  
Play  
Pause  
Up  
Enter  
Down  
Setup  
Audio Angle Subtitle Zoom  
Angle  
Stop  
Play  
Pause  
Up  
On/  
Down  
During playback, use the Zoom  
button to select the zoom factor.  
1
Zoom  
• Normal  
• 2x  
• 4x  
During playback (or when  
paused), press Angle to switch  
angle.  
Angle  
Normal  
Zoom  
2
Zoom 2x  
Zoom 4x  
Zoom 4x  
• Since DVD andVideo CD have a fixed  
resolution, picture quality will deterio-  
rate, especially at 4x zoom. This is not  
a malfunction.  
Use the cursor buttons to change  
the zoomed area.  
2
You can change the zoom factor and the  
zoomed area freely during playback.  
• If the navigation square at the top of  
the screen disappears, press Zoom  
again to display it.  
Notes:  
• We do not recommend using DVD disc menus when  
the screen is zoomed as menu options will not be high-  
lighted.  
• If you are displaying subtitles, these will disappear  
when the screen is zoomed. They will reappear when  
you return the screen to normal.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs—Continued  
Note:  
Displaying disc information  
You can see disc information (number of titles/chap-  
ters, tracks, folders and so on) from the Disc Navigator  
screen. See “Using the Disc Navigator to browse the  
contents of a disc” on page 28.  
Various track, chapter and title information, as well as  
the video transmission rate for DVD discs, can be dis-  
played on-screen while a disc is playing.  
On  
Standby  
Repeat  
Open/  
Close  
-
A
B
Random  
Play Mode  
Display  
1
4
7
2
5
8
0
3
6
9
Display  
Dimmer  
Clear  
Menu  
To show/switch the information  
displayed, press Display.  
When a disc is playing, the information  
appears at the top of the screen. Keep  
pressing Display to change the displayed  
information.  
Display  
• DVD displays  
Play  
DVD  
Current / Total  
11/38  
1. French  
Audio Dolby Digital 3/2.1CH  
Elapsed  
2.05  
Remain  
4.57  
Total  
7.02  
Title  
1. English  
1
Subtitle  
Angle  
Play  
DVD  
Current / Total  
11/38  
Elapsed  
2.05  
Remain  
4.57  
Total  
7.02  
Chapter  
Tr. Rate  
8.6Mbps  
• VR format DVD-RW displays  
Play  
DVD-RW  
Current / Total Elapsed  
1/32 0.08  
Original  
Remain  
30.22  
Total  
30.30  
Title  
1
- -  
Audio Dolby Digital  
Play  
2/0CH  
Subtitle  
Original  
DVD-RW  
Current / Total  
1/1  
Chapter  
Tr. Rate  
4.3Mbps  
• CD and Video CD displays  
Play  
Track  
Play  
Disc  
CD  
Current / Total  
2/16  
Elapsed  
1.07  
Remain  
4.40  
Total  
5.47  
CD  
Elapsed  
28.00  
Remain  
30.20  
Total  
58.20  
• WMA/MP3 disc displays  
Play  
MP3  
Current / Total  
1/17  
Elapsed  
0.18  
Remain  
12.42  
Total  
13.00  
Track  
Track Name  
Outernational  
Play  
MP3  
Current / Total  
Folder  
2/7  
Folder Name ACP  
• JPEG disc displays  
Play  
JPEG  
Current / Total  
File  
1/40  
File Name  
FL000001  
Play  
JPEG  
Current / Total  
1/40  
Folder  
Folder Name Holiday  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing JPEG discs  
Viewing JPEG discs  
Using the JPEG Disc Navigator and  
Photo Browser  
After loading a CD/CD-R/RW containing JPEG pic-  
tures, press Play ( ) to start a slideshow from the first  
folder/picture on the disc. The player displays the pic-  
tures in each folder in alphabetical order.  
Use the JPEG Disc Navigator to find a particular folder  
or picture by filename; use the Photo Browser to find a  
picture within a folder by thumbnail image.  
Pictures are automatically adjusted so that they fill as  
much of the screen as possible (if the aspect ratio of the  
picture is different to your TV screen you may notice  
black bars at the sides, or at the top and bottom of the  
screen).  
On  
Standby  
Repeat  
Open/  
Close  
-
A
B
Random  
Play Mode  
Display  
1
4
7
2
5
8
0
3
6
9
Dimmer  
On  
Standby  
Repeat  
/
/
/
Clear  
Open/  
Close  
Menu  
Top Menu  
Return  
-
A
B
Random  
Play Mode  
Display  
Menu  
1
4
7
2
5
8
0
3
Enter  
Setup  
Enter  
6
9
Dimmer  
Audio Angle Subtitle Zoom  
Clear  
Stop  
Play  
Pause  
Up  
Menu  
Top Menu  
Return  
Down  
Menu  
Enter  
Setup  
Audio Angle Subtitle Zoom  
Angle  
Play  
Zoom  
Pause  
Down  
Stop  
Play  
Pause  
Up  
Press Menu to display the Disc  
Navigator screen.  
1
Menu  
Down  
Up  
/
Disc Navigator  
Folder 1-2  
File 1-40  
001. FL000001  
002. FL000002  
003. FL000003  
004. FL000004  
005. FL000005  
006. FL000006  
007. FL000007  
008. FL000008  
JPEG  
001. F_001  
002. F_002  
While the slideshow is running:  
Button  
What it does  
Pauses the slideshow; press again to  
restart.  
The left column shows the folders on the  
disc, the right column shows the files in a  
folder.  
Displays the previous picture.  
Displays the next picture.  
Pauses the slideshow and rotates the  
currently displayed picture 90˚ clock-  
wise. Press Play ( ) to restart slide-  
show).  
Use the cursor buttons (  
) to navigate.  
When a file is highlighted, a thumbnail  
image is displayed.  
• When a folder is highlighted you can  
press Enter to open the Photo Browser  
screen for that folder. See below for  
more on using the Photo Browser.  
/
/
/
2
3
Angle  
Enter  
Pauses the slideshow and zooms the  
screen (see below). Press Play ( ) to  
restart slideshow).  
Zoom  
Displays the Disc Navigator screen  
(see below).  
Menu  
To resume the slideshow from the  
highlighted file, press Enter.  
Notes:  
• The Pause ( ), Angle and Zoom buttons do not work  
while the display shows “LOADING.”  
• The time it takes for the player to load a file increases  
with large file sizes.  
Enter  
• Up to 999 files are viewable on a disc. If there are more  
files than this on a disc, only the first 999 files are  
viewable.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing JPEG discs—Continued  
Using the Photo Browser  
Zooming the screen  
The Photo Browser displays nine thumbnail images at a  
time from the current folder.  
Using the zoom feature you can magnify a part of the  
screen by a factor of 2 or 4, while viewing pictures from  
a JPEG disc.  
On  
Standby  
Repeat  
Open/  
Close  
-
A
B
Random  
Play Mode  
Display  
On  
Standby  
Repeat  
Open/  
Close  
-
A
B
Random  
Play Mode  
Display  
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
Dimmer  
6
9
Dimmer  
/
/
/
Clear  
Menu  
Top Menu  
Return  
/
/
/
Clear  
Menu  
Top Menu  
Return  
Enter  
Setup  
Enter  
Enter  
Setup  
Audio Angle Subtitle Zoom  
Stop  
Play  
Pause  
Up  
Audio Angle Subtitle Zoom  
Zoom  
Down  
Stop  
Play  
Pause  
Up  
Down  
Up  
/
Play  
Down  
From the Disc Navigator screen,  
highlight a folder to display then  
press Enter.  
The Photo Browser screen opens with the  
first nine pictures displayed as thumb-  
nails.  
1
During slideshow playback, use  
the Zoom button to select the  
zoom factor.  
1
Zoom  
Enter  
• Normal  
Normal  
• 2x  
• 4x  
Photo Browser  
2 / 40 Live at Soft  
Zoom 2x  
Zoom 4x  
Use the cursor buttons (  
) to highlight a thumbnail pic-  
ture.  
• Use the track skip buttons (  
) to see the previous / next page of  
thumbnails. Keep the button pressed if  
you want to skip several pages; release  
when you reach the page you want.  
• To return to the Disc Navigator screen,  
press Return.  
/
/
/
2
3
• The slideshow is paused when the  
screen is zoomed.  
• Since JPEG pictures have a fixed reso-  
lution, picture quality may deteriorate,  
especially at 4x zoom. This is not a  
malfunction.  
Enter  
and  
Use the cursor buttons (  
/
/
/
2
) to change the zoomed area.  
You can change the zoom factor and the  
zoomed area freely.  
• When you change the zoom area, this  
becomes the new “default” zoom area  
for the disc loaded.  
Press Enter to display the selected  
thumbnail full size on screen.  
The slideshow resumes from the selected  
picture.  
Enter  
Enter  
To resume the slideshow, press  
Play ( ).  
3
Play  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Settings menu  
• Audio DRC is only effective through the digital output  
when “Digital Out” (see page 43) is set to “On”, and  
“Dolby Digital Out” (see page 43) is set to “Dolby  
Digital > PCM”.  
• The effect of Audio DRC depends on your speakers  
and AV receiver settings.  
Audio DRC  
Default setting: Off  
When watching Dolby Digital DVDs at low volume, it’s  
easy to lose the quieter sounds completely—including  
some of the dialog.  
Switching Audio DRC (Dynamic Range Control) to On  
can help by bringing up the quieter sounds, while con-  
trolling loud peaks.  
How much of a difference you hear depends on the mate-  
rial you’re listening to. If the material doesn’t have wide  
variations in volume, you may not notice much change.  
On  
Standby  
Repeat  
Open/  
Close  
-
A
B
Random  
Play Mode  
Display  
1
4
7
2
5
8
0
3
6
9
Dimmer  
Clear  
Menu  
Top Menu  
Return  
/
Enter  
Setup  
Enter  
Setup  
Audio Angle Subtitle Zoom  
Stop  
Play  
Pause  
Up  
Down  
Press Setup and selectAudio Set-  
tings” from the on-screen display.  
1
Setup  
HOME MENU  
DVD  
Audio Settings  
Play Mode  
Video Adjust  
Disc Navigator  
Setup Navigator  
Initial Settings  
Highlight Audio DRC, then use the  
(cursor left/right) buttons to  
change to “On” or “Off”, as  
required.  
2
3
/
Enter  
Audio Settings  
Audio DRC  
Off  
Press Enter to make the setting  
and exit the Audio Settings screen.  
Enter  
Notes:  
• Audio DRC is only effective with Dolby Digital audio  
sources.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Adjust menu  
Video Adjust  
Adjust the picture quality settings.  
4
Default setting: Standard  
Memory1  
From theVideoAdjust screen you can select the standard  
video presentation or define presets of your own.  
Recall Settings  
Contrast  
Memory1  
min  
min  
min  
max  
max  
max  
Brightness  
Chroma Level  
On  
Standby  
Repeat  
Open/  
Close  
-
A
B
Random  
Play Mode  
Display  
• Use the  
tons to select a setting.  
• Use the (cursor left/right) but-  
/
(cursor up/down) but-  
1
4
7
2
5
8
0
3
6
9
/
Dimmer  
tons to adjust the current setting.  
• Press Display to switch between full  
and single view.  
• To use the settings from another pre-  
set, select “Recall Settings,” and then  
Clear  
Menu  
Top Menu  
Return  
/
Enter  
Setup  
Enter  
Setup  
Audio Angle Subtitle Zoom  
use the  
/
(cursor left/right) but-  
Stop  
Play  
Pause  
Up  
tons to select Memory 1, Memory 2, or  
Standard.  
You can adjust any or all of the following  
picture quality settings:  
Down  
Press Setup and select “Video  
Adjust” from the on-screen dis-  
play.  
Contrast—Adjusts the contrast  
between light and dark.  
Brightness—Adjusts the overall  
brightness.  
Chroma Level—Adjusts how satu-  
rated colors appear.  
1
Setup  
HOME MENU  
DVD  
Audio Settings  
Play Mode  
Video Adjust  
Disc Navigator  
Setup Navigator  
Press Enter to save the preset and  
exit the Video Adjust screen.  
5
Initial Settings  
Enter  
Use the  
buttons to select a preset.  
/
(cursor left/right)  
2
3
Video Adjust  
Enter  
Standard  
• With the Standard option, the default  
settings are used. If you choose this  
option, go to step 5.  
• With the Memory 1-2 options, you can  
store and recall your own settings. If  
you select this option, go to step 3.  
Press  
(cursor down) to select  
“Detailed Settings” then press  
Enter.  
Enter  
Video Adjust  
Memory1  
Detailed Settings  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings menu  
Dolby Digital Out  
Using the Initial Settings menu  
You only need to make this setting if you connected this  
player to an AV receiver (or other component) using one  
of the digital outputs.  
The Initial Settings menu gives you complete control in  
setting up your DVD player, including audio, and video  
output settings, audience limitation settings, among oth-  
ers.  
Default setting: Dolby Digital  
If an option is grayed out it means that it cannot be  
changed at the current time. This is usually because a  
disc is playing. Stop the disc, then change the setting.  
Initial Settings  
Digital Audio Out  
Video Output  
Language  
Digital Out  
Dolby Digital  
Dolby Digital Out  
DTS Out  
Dolby Digital > PCM  
Display  
96 kHz PCM Out  
MPEG Out  
Options  
While playback is stopped, press  
Setup and select “Initial Settings”  
from the on-screen display.  
1
Setup  
If your AV receiver (or other connected component) is  
Dolby Digital compatible, set to “Dolby Digital”, other-  
wise set to “Dolby Digital > PCM”.  
HOME MENU  
DVD  
Audio Settings  
Play Mode  
Video Adjust  
DTS Out  
Disc Navigator  
Setup Navigator  
You only need to make this setting if you connected this  
player to an AV receiver (or other component) using one  
of the digital outputs.  
Initial Settings  
Select the setup category from the  
list on the left, then select an item  
from the menu list to the right.  
Default setting: DTS  
2
Initial Settings  
Digital Audio Out  
Video Output  
Language  
Digital Out  
DTS  
Off  
Dolby Digital Out  
DTS Out  
Make the setting you want.  
3
Display  
96 kHz PCM Out  
MPEG Out  
Options  
Note:  
• The language options shown in the onscreen display  
illustrations on the following pages may not corre-  
spond to those available in your country or region.  
If your AV receiver (or other connected component) has  
a built-in DTS decoder, set this to “DTS”, otherwise set  
to “Off”. Check the manual that came with the other  
component if you’re unsure whether it is DTS compati-  
ble.  
Digital Audio Out settings  
Note:  
Digital Out  
• If you set to DTS with a non-DTS compatible ampli-  
fier, noise will be output when you play a DTS disc.  
You only need to make this setting if you connected this  
player to an AV receiver (or other component) using one  
of the digital outputs.  
96kHz PCM Out  
You only need to make this setting if you connected this  
player to an AV receiver (or other component) using one  
of the digital outputs.  
Default setting: On  
Initial Settings  
Digital Audio Out  
Video Output  
Language  
Digital Out  
On  
Off  
Default setting: 96 kHz > 48kHz  
Dolby Digital Out  
DTS Out  
Initial Settings  
Display  
96 kHz PCM Out  
MPEG Out  
Options  
Digital Audio Out  
Video Output  
Language  
Digital Out  
96 kHz > 48kHz  
96 kHz  
Dolby Digital Out  
DTS Out  
Display  
96 kHz PCM Out  
MPEG Out  
If at any time you need to switch off the digital audio  
output, set this to “Off”, otherwise leave it “On”.  
Note that you can’t switch on/off the optical and coaxial  
outputs individually.  
Options  
If your AV receiver (or other connected component) is  
compatible with high sampling rates (96 kHz), set this to  
“96 kHz,” otherwise set it to “96 kHz > 48 kHz” (96 kHz  
audio is converted to a more compatible 48 kHz). Check  
the manual that came with the other component if you’re  
unsure whether it is 96 kHz compatible.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings menu—Continued  
Default setting: Interlace  
MPEG Out  
You only need to make this setting if you connected this  
player to an AV receiver (or other component) using one  
of the digital outputs.  
Initial Settings  
Digital Audio Out  
Video Output  
Language  
Progressive  
Interlace  
TV Screen  
Component Out  
S-Video Out  
Display  
Default setting: MPEG > PCM  
Options  
Initial Settings  
Digital Audio Out  
Video Output  
Language  
Digital Out  
MPEG  
If you have a progressive-scan compatible TV, set this to  
“Progressive” for flicker-free video output. If your TV is  
not compatible with progressive-scan video, set to Inter-  
lace.  
Dolby Digital Out  
DTS Out  
MPEG > PCM  
Display  
96 kHz PCM Out  
MPEG Out  
Options  
Check the operating instructions that came with your TV  
if you’re unsure about its compatibility.  
• When setting to “Progressive”, you have to press Enter  
once more to confirm. See also below for important  
information on progressive scan video.  
If your AV receiver (or other connected component) is  
compatible with MPEG audio, set this to “MPEG”, oth-  
erwise set it to “MPEG > PCM” (MPEG audio is con-  
verted to more compatible PCM audio). Check the  
manual that came with the other component if you”re  
unsure whether it is MPEG audio compatible.  
About progressive scan video  
Compared to interlace video, progressive scan video  
effectively doubles the scanning rate of the picture,  
resulting in a very stable, flicker-free image. Progressive  
scan video is available only from the component video  
output.  
Video Output settings  
TV Screen  
Default setting: 4:3 (Letter Box)  
Initial Settings  
Important  
Digital Audio Out  
Video Output  
Language  
4:3 (Letter Box)  
4:3 (Pan&Scan)  
16:9 (Wide)  
TV Screen  
• Australian model and when TV system is set to  
“AUTO” or “NTSC” only: When Component Out  
(see above) is set to “Progressive”, there is no video  
output from the VIDEO OUT (composite) and  
S (S-video) jacks. If you want to display video on  
more than one monitor simultaneously, make sure that  
it is set to “Interlace.” See also “Setting the TV sys-  
tem” on page 49.  
Component Out  
S-Video Out  
Display  
Options  
If you have a widescreen TV, select the “16:9 (Wide)”  
setting—widescreen DVD software is then shown using  
the full screen area. When playing software recorded in  
conventional (4:3) format, the settings on your TV will  
determine how the material is presented—see the man-  
ual that came with your TV for details on what options  
are available.  
If you have a conventional TV, select either “4:3 (Letter  
Box)” or “4:3 (Pan & Scan)”. In Letter Box mode, wide-  
screen software is shown with black bars at the top and  
bottom of the screen. Pan & Scan chops the sides off  
widescreen material to make it fit the 4:3 screen (so even  
though the image looks larger on the screen, you’re actu-  
ally seeing less of the picture). See also “Screen sizes  
and disc formats” on page 49. Pan & Scan only works  
with DVD-Video discs that support Pan & Scan.  
North American model  
When Component Out (see above) is set to “Pro-  
gressive”, there is no video output from theVIDEO  
OUT (composite) and S (S-video) jacks. If you want  
to display video on more than one monitor simulta-  
neously, make sure that it is set to “Interlace.” See also  
“Setting the TV system” on page 49.  
If you connect a TV that is not compatible with a  
progressive scan signal and switch the player to  
progressive, you will not be able to see any picture  
at all. In this case, switch everything off and reconnect  
using the supplied video cable (see “Basic Setup” on  
page 18), then switch back to Interlace. Switch the  
player to standby then, using the front panel controls,  
Component Out  
press Standby/On while pressing  
player back to “Interlace.”  
to switch the  
You only need to make this setting if you connected this  
player to a progressive scan compatible TV using the  
component video outputs.  
• Australian model and when TV system is set to  
“AUTO” or “NTSC” only: When set to “Progressive”,  
PAL and NTSC discs are both output as progressive  
NTSC video. When TV System is set to “PAL” only:  
Progressive cannot be selected. See page 49.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings menu—Continued  
Compatibility of this unit with progressive-scan TVs.  
This player is compatible with progressive video Macro  
Vision System Copy Guard.  
Tips:  
You can switch between the languages recorded on a  
DVD disc during playback using the Audio button.  
(This does not affect this setting.) See “Switching  
DVD audio language” on page 36.  
• Some DVD discs set the audio language automatically  
when loaded, overriding the “Audio Language” set-  
ting.  
• Discs with two or more audio languages usually allow  
you to select the audio language from the disc menu.  
Press Menu to access the disc menu.  
CONSUMERS SHOULD NOTE THAT NOT ALL  
HIGH DEFINITION TELEVISION SETSARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED  
THAT THE USER SWITCH THE CONNECTION TO  
THE “STANDARD DEFINITION” OUTPUT. IF  
THERE ARE QUESTIONS REGARDING OUR TV  
SET COMPATIBILITY WITH THIS MODEL 525p  
DVD PLAYER, PLEASE CONTACT OUR CUS-  
TOMER SERVICE CENTER.  
Subtitle Language  
Default setting: English  
Initial Settings  
S-Video Out  
Digital Audio Out  
Video Output  
Language  
Audio Language  
Subtitle Language  
DVD Menu Lang.  
Subtitle Display  
English  
French  
You only need to make this setting if you connected this  
player to your TV using an Svideo cable.  
German  
Display  
Italian  
Options  
Spanish  
Other Language  
Default setting: S2  
Initial Settings  
This setting is your preferred subtitle language for DVD  
discs. If the language you specify here is recorded on a  
disc, the player automatically plays the disc with those  
subtitles.  
Digital Audio Out  
Video Output  
Language  
TV Screen  
S1  
S2  
Component Out  
S-Video Out  
Display  
Options  
The DVD format recognizes 136 different languages.  
Select “Other Language” if you want to specify a lan-  
guage other than those listed. See also “Selecting lan-  
guages using the language code list” on page 50.  
If you find that the picture is stretched or distorted on the  
default “S2” setting, try changing it to “S1”.  
Language settings  
Audio Language  
Default setting: English  
Initial Settings  
Digital Audio Out  
Video Output  
Language  
Audio Language  
Subtitle Language  
DVD Menu Lang.  
Subtitle Display  
English  
French  
German  
Display  
Italian  
Options  
Spanish  
Other Language  
This setting is your preferred audio language for DVD  
discs. If the language you specify here is recorded on a  
disc, the player automatically plays the disc in that lan-  
guage.  
The DVD format recognizes 136 different languages.  
Select “Other Language” if you want to specify a lan-  
guage other than those listed. See also “Selecting lan-  
guages using the language code list” on page 50.  
The available languages vary between models.  
North American model: English, French, Spanish, German,  
Italian, Other Language.  
Australian model: English, French, Spanish, Chinese (tradi-  
tional), Other Language.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings menu—Continued  
The available languages vary between models.  
Subtitle Display  
Default setting: On  
Initial Settings  
North American model: English, French, Spanish, German,  
Italian, Other Language.  
Australian model: English, French, Spanish, Chinese (tradi-  
tional), Other Language.  
Digital Audio Out  
Video Output  
Language  
Audio Language  
On  
Off  
Tips:  
Subtitle Language  
DVD Menu Lang.  
Subtitle Display  
You can change or switch off the subtitles on a DVD  
disc during playback using the Subtitle button. (This  
does not affect this setting.) See “Switching subtitles”  
on page 36.  
• Some DVD discs set the subtitle language automati-  
cally when loaded, overriding the “Subtitle Language”  
setting.  
Display  
Options  
When set to “On”, the player displays subtitles accord-  
ing to the “Subtitle Language” setting. Set to “Off” to  
switch subtitles off altogether.  
• Discs with two or more subtitle languages usually  
allow you to select the subtitle language from the disc  
menu. Press Menu to access the disc menu.  
Display settings  
OSD Language  
Default setting: English  
Initial Settings  
DVD Menu Language  
Default setting: w/Subtitle Lang.  
Initial Settings  
Digital Audio Out  
Video Output  
Language  
OSD Language  
On Screen Display  
Angle Indicator  
English  
français  
Deutsch  
Italiano  
Español  
Digital Audio Out  
Video Output  
Language  
Audio Language  
Subtitle Language  
DVD Menu Lang.  
Subtitle Display  
w/Subtitle Lang.  
English  
Display  
French  
Options  
Display  
German  
Options  
Italian  
Spanish  
Other Language  
This sets the language of this player’s onscreen displays.  
The available languages vary between models.  
Some multilingual discs have disc menus in several lan-  
guages. This setting specifies in which language the disc  
menus should appear. Leave on the default setting for  
menus to appear in the same language as your “Subtitle  
Language”—see above.  
The DVD format recognizes 136 different languages.  
Select “Other Language” if you want to specify a lan-  
guage other than those listed. See also “Selecting lan-  
guages using the language code list” on page 50.  
The available languages vary between models.  
NorthAmerican model: English, Français, Español, Deutsch,  
Italiano.  
Australian model: English, Français, Español,  
.
On Screen Display  
Default setting: On  
Initial Settings  
Digital Audio Out  
Video Output  
Language  
OSD Language  
On  
Off  
On Screen Display  
Angle Indicator  
North American model: English, French, Spanish, German,  
Italian, Other Language.  
Display  
Options  
Australian model: English, French, Spanish, Chinese (tradi-  
tional), Other Language.  
This sets whether operation displays are shown on-  
screen (“Play”, “Resume”, “Scan” and so on.)  
Angle Indicator  
Default setting: On  
Initial Settings  
Digital Audio Out  
Video Output  
Language  
OSD Language  
On Screen Display  
Angle Indicator  
On  
Off  
Display  
Options  
If you prefer not to see the camera icon onscreen during  
multi-angle scenes on DVD discs, change this setting to  
“Off”.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings menu—Continued  
Options  
Press Enter to register the password and  
return to the Options menu screen.  
If you forget your password, you can reset the  
player then register a new one. See “Resetting the  
player” on page 49 for how to reset the player.  
3
Parental Lock  
Default level: Off  
Default password: none  
Default Country code: us (2119)  
Changing your password  
Some DVD-Video discs feature a Parental Lock level. If  
your player is set to a lower level than the disc, the disc  
won’t play. This gives you some control about what your  
children watch on your DVD player.  
To change your password, confirm your existing pass-  
word then enter a new one.  
Select “Password Change”.  
Some discs also support the Country code feature. The  
player does not play certain scenes on these discs,  
depending on the Country code you set.  
Before you can set the Parental Lock level or the Country  
code you must register a password.  
As the password owner, you can change the Parental  
Lock level or Country code whenever you like. You can  
also change the password.  
1
Initial Settings  
Digital Audio Out  
Video Output  
Language  
Parental Lock  
PhotoViewer  
Password Change  
Level Change  
Country Code  
Display  
Options  
Notes:  
Use the number buttons to enter your  
existing password, then press Enter.  
The numbers appear as asterisks as you enter  
them.  
2
• Not all discs that you may consider inappropriate for  
your children use the Parental Lock feature. These  
discs will always play without requiring the password  
first.  
Initial Settings  
• If you forget your password, you’ll need to reset the  
player to its factory settings (see “Resetting the  
player” on page 49), then register a new password.  
Parental Lock: Password Change  
Digital Audio Out  
Video Output  
Password  
*
*
*
*
Language  
Display  
New Password  
Options  
Registering a new password  
You must register a password before you can change the  
Parental Lock level or enter a Country code.  
Enter a new password.  
3
4
Select “Password”.  
1
Initial Settings  
Initial Settings  
Parental Lock: Password Change  
Password  
Digital Audio Out  
Video Output  
Language  
Digital Audio Out  
Video Output  
Language  
Parental Lock  
PhotoViewer  
Password  
*
*
*
*
*
*
*
*
Level Change  
Country Code  
Display  
New Password  
Options  
Display  
Options  
Press Enter to register the new password  
and return to the Options menu screen.  
Use the number buttons to enter a 4-digit  
password.  
2
Initial Settings  
Digital Audio Out  
Parental Lock: Register Code Number  
Video Output  
Language  
*
*
*
*
Display  
Options  
The numbers you enter show up as asterisks (*)  
on-screen.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings menu—Continued  
Setting/changing the Parental Lock level  
Select a Country code.  
There are two ways you can do this.  
• Select by code letter: Use  
down) to change the Country code.  
3
Select “Level Change”.  
1
/
(cursor up/  
Initial Settings  
Digital Audio Out  
Video Output  
Language  
Parental Lock  
PhotoViewer  
Password Change  
Level Change  
Initial Settings  
Country Code  
Parental Lock: Country Code  
Digital Audio Out  
Display  
Video Output  
Language  
Display  
Password  
*
*
*
*
Options  
Country Code List  
us  
Code  
Options  
2
1
1
9
Use number buttons to enter your pass-  
word, then press Enter.  
2
3
• Select by code number: Press  
(cursor right)  
then use the number buttons to enter the 4-digit  
Country code (you can find the “Country code  
list” on page 51.)  
Initial Settings  
Parental Lock : Level Change  
Digital Audio Out  
Video Output  
Language  
Display  
Password  
*
*
*
*
Initial Settings  
Options  
1
2
3
4
5
6
7
8
off  
Parental Lock: Country Code  
Digital Audio Out  
Video Output  
Language  
Display  
Password  
*
*
*
*
Country Code List  
us  
Code  
Select a new level.  
Options  
2
1
1
9
Initial Settings  
Parental Lock : Level Change  
Password  
Digital Audio Out  
Video Output  
Language  
Press Enter to set the new Country code  
and return to the Options menu screen.  
*
*
*
*
4
Display  
Options  
1
2
3
4
5
6
7
8
off  
Note:  
• Changing the Country code does not take effect until  
the next disc is loaded (or the current disc is reloaded).  
Press  
(cursor left) repeatedly to lock more lev-  
els (more discs will require the password);press  
(cursor right) to unlock levels. You can’t lock  
level 1.  
PhotoViewer  
To cancel the Parental Lock function, select “Off.”  
Default setting: On  
Press Enter to set the new level and return  
to the Options menu screen.  
Initial Settings  
4
Digital Audio Out  
Video Output  
Language  
Parental Lock  
PhotoViewer  
On  
Off  
Display  
Setting/changing the Country code  
Options  
You may also want to refer to the “Country code list” on  
page 51.  
This setting is important if you load a disc that contains  
both WMA/MP3 audio files and JPEG picture files.  
The default “On” setting allows you to view only the  
JPEG files on this kind of disc. Set to “Off” to be able to  
play the WMA/MP3 audio files.  
Select “Country Code”.  
1
Initial Settings  
Digital Audio Out  
Video Output  
Language  
Parental Lock  
PhotoViewer  
Password Change  
Level Change  
Country Code  
Display  
Note:  
Options  
• Changing the PhotoViewer setting does not take effect  
until the next disc is loaded (or the current disc is  
reloaded).  
Use number buttons to enter your pass-  
word, then press Enter.  
2
Initial Settings  
Parental Lock: Country Code  
Digital Audio Out  
Video Output  
Language  
Display  
Password  
*
*
*
*
Country Code List  
us  
Code  
Options  
2
1
1
9
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
Screen sizes and disc formats  
Resetting the player  
DVD-Video discs come in several different screen aspect  
ratios, ranging from TV programs, which are generally  
4:3, to Cinema- Scope widescreen movies, with an  
aspect ratio of up to about 7:3.  
Televisions, too, come in different aspect ratios; “stan-  
dard” 4:3 and widescreen 16:9.  
Use this procedure to reset all the player’s settings to the  
factory default.  
Switch the player into standby.  
1
Using the front panel buttons,hold  
down the Stop ( ) button and  
2
Stop  
Widescreen TV users  
press Standby/On to switch the  
player back on.  
If you have a widescreen TV, the TV Screen setting  
(page 44) of this player should be set to “16:9 (Wide)”.  
When you watch discs recorded in 4:3 format, you can  
use the TV controls to select how the picture is pre-  
sented. Your TV may offer various zoom and stretch  
options; see the instructions that came with your TV for  
details.  
Standby/On  
Please note that some movie aspect ratios are wider than  
16:9, so even though you have a widescreen TV, these  
discs will still play in a “letter box” style with black bars  
at the top and bottom of the screen.  
Setting the TV system  
(Australian model)  
The default setting of this player is “AUTO”, and unless  
you notice that the picture is distorted when playing  
some discs, you should leave it set to “AUTO”. If you  
experience picture distortion with some discs, set the TV  
system to match your country or region’s system. Doing  
this, however, may restrict the kinds of disc you can  
watch. The table below shows what kinds of disc are  
compatible with each setting (“AUTO” , “PAL” and  
“NTSC”).  
Standard TV users  
If you have a standard TV, the “TV Screen” setting  
(page 44) of this player should be set to “4:3 (Letter  
Box)” or “4:3 (Pan&Scan)”, depending on which you  
prefer.  
Set to “4:3 (Letter Box)”, widescreen discs are shown  
with black bars top and bottom.  
Standby/On  
Standby/On  
Open/Close  
Stop  
Play  
Pause  
Display  
Dimmer  
Play Mode  
Clear  
Standby  
Power  
On  
Off  
-
DPS 5.4  
Set to “4:3 (Pan&Scan)”, widescreen discs are shown  
with the left and right sides cropped.  
Although the picture looks larger, you don’t actually see  
the whole picture.  
If the player is on, press Standby/  
On to switch it to standby.  
1
2
Standby/On  
Using the front panel controls,  
hold down  
then press  
Standby/On to switch the TV sys-  
tem.  
The TV system changes as follows:  
Please note that many widescreen discs override the  
player’s settings so that the disc is shown in letter box  
format regardless of the setting.  
Standby/On  
Note:  
AUTO  
NTSC  
PAL  
• Using the “16:9 (Wide)” setting with a standard 4:3  
TV, or either of the “4:3” settings with a widescreen  
TV, will result in a distorted picture.  
Note:  
You have to switch the player into standby (press  
Standby/On) before each change.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information—Continued  
Disc  
Format  
NTSC  
Player setting  
Selecting languages using the  
language code list  
Type  
DVD  
NTSC  
NTSC  
NTSC  
NTSC  
PAL  
AUTO  
MOD.PAL NTSC  
MOD.PAL NTSC  
Some of the language options (such as “DVD Language”  
in the Setup Navigator) allow you to set your prefered  
language from any of the 136 languages listed in the lan-  
guage code list on page 52.  
Video CD NTSC  
PAL  
PAL  
PAL  
PAL  
CD/no  
NTSC or  
PAL  
NTSC  
disc  
On  
Standby  
Repeat  
Open/  
Close  
-
A
B
Random  
Play Mode  
Display  
Titles, chapters and tracks  
1
4
7
2
5
8
0
3
6
9
DVD discs are generally divided into one or more titles.  
Titles may be further subdivided into chapters.  
Dimmer  
Clear  
Menu  
Top Menu  
Return  
Enter  
/
/
/
Setup  
Title 1  
Title 2  
Title 3  
Audio Angle Subtitle Zoom  
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2  
CDs and Video CDs are divided into tracks.  
Select “Other Language”.  
1
2
Use the  
/
(cursor left/right)  
buttons to select either a code  
letter or a code number.  
Track 1  
Track 2  
Track 3  
Track 1  
Track 1  
Track 2  
Enter  
CD-ROMs contain folders and files. MP3 and WMA  
files are referred to as tracks. Folders may contain further  
folders.  
Use the  
/
(cursor up/down)  
3
buttons to select a code letter or  
a code number.  
Folder A  
Track 1  
Folder B Folder C  
Enter  
See “Language code list” on page 52  
for a complete list of languages and  
codes.  
Track 2  
Track 3  
Track 1  
File 1  
File 2  
DVD-Video regions  
All DVD-Video discs carry a region mark on the case  
somewhere that indicates which region(s) of the world  
the disc is compatible with. Your DVD player also has a  
region mark, which you can find on the rear panel. Discs  
from incompatible regions will not play in this player.  
Discs marked “ALL” will play in any player.  
The diagram below shows the various DVD regions of  
the world.  
1
5
2
1
6
2
3
4
5
2
4
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information—Continued  
Country code list  
Country code  
letter  
Country  
Country code  
Argentina  
Australia  
Austria  
0118  
0121  
0120  
0205  
0218  
0301  
0312  
0314  
0411  
0609  
0618  
0405  
0811  
0914  
0904  
0920  
1016  
1118  
1325  
1324  
1412  
1426  
1415  
1611  
1608  
1620  
1821  
1907  
0519  
1905  
0308  
2023  
2008  
0702  
2119  
ar  
au  
at  
Belgium  
Brazil  
be  
br  
ca  
cl  
Canada  
Chile  
China  
cn  
dk  
Denmark  
Finland  
France  
fr  
Germany  
Hong Kong  
India  
de  
hk  
in  
Indonesia  
Italy  
id  
it  
Japan  
jp  
Korea, Republic of  
Malaysia  
Mexico  
kr  
my  
mx  
nl  
Netherlands  
New Zealand  
Norway  
nz  
no  
pk  
ph  
pt  
Pakistan  
Philippines  
Portugal  
Russian Federation  
Singapore  
Spain  
ru  
sg  
es  
se  
ch  
tw  
th  
Sweden  
Switzerland  
Taiwan  
Thailand  
United Kingdom  
USA  
gb  
us  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information—Continued  
Language code list  
Language  
Language  
Language  
code  
letter  
Language  
code  
letter  
Language  
code  
Language  
code  
Language  
code  
letter  
Language  
Language  
code  
Japanese  
English  
French  
ja  
1001  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
Inupiak  
hr  
hu  
hy  
ia  
0818  
0821  
0825  
0901  
0905  
0911  
0914  
0919  
0923  
1009  
1023  
1101  
1111  
1112  
1113  
1114  
1119  
1121  
1125  
1201  
1214  
1215  
1220  
1222  
1307  
1309  
1311  
1312  
1314  
1315  
1318  
1319  
1320  
1325  
1401  
1405  
1415  
1503  
1513  
1518  
1601  
1612  
Sindhi  
sd  
sg  
1904  
1907  
en  
fr  
0514  
0618  
0405  
0920  
0519  
2608  
1412  
1620  
1922  
1821  
1115  
0512  
0101  
0102  
0106  
0113  
0118  
0119  
0125  
0126  
0201  
0205  
0207  
0208  
0209  
0214  
0215  
0218  
0301  
0315  
0319  
0325  
0401  
0426  
0515  
0520  
0521  
0601  
0609  
0610  
0615  
0625  
0701  
0704  
0712  
0714  
0721  
0801  
0809  
Sangho  
Serbo-  
Croatian  
sh  
1908  
German  
Italian  
de  
it  
Sinhalese  
Slovak  
Slovenian  
Samoan  
Shona  
si  
sk  
sl  
1909  
1911  
1912  
1913  
1914  
1915  
1917  
1918  
1919  
1920  
1921  
1923  
2001  
2005  
2007  
2008  
2009  
2011  
2012  
2014  
2015  
2018  
2019  
2020  
2023  
2111  
2118  
2126  
2209  
2215  
2315  
2408  
2515  
2621  
ie  
Spanish  
Chinese  
Dutch  
es  
zh  
nl  
ik  
Indonesian  
Icelandic  
Hebrew  
in  
sm  
sn  
so  
sq  
sr  
ss  
st  
is  
Portuguese  
Swedish  
Russian  
Korean  
Greek  
pt  
iw  
ji  
Somali  
Albanian  
Serbian  
Siswati  
Sesotho  
Sundanese  
Swahili  
Tamil  
sv  
ru  
ko  
el  
Yiddish  
Javanese  
Georgian  
Kazakh  
jw  
ka  
kk  
kl  
Afar  
aa  
ab  
af  
Greenlandic  
Cambodian  
Kannada  
Kashmiri  
Kurdish  
su  
sw  
ta  
te  
tg  
th  
ti  
Abkhazian  
Afrikaans  
Amharic  
Arabic  
km  
kn  
ks  
ku  
ky  
la  
am  
ar  
as  
ay  
az  
ba  
be  
bg  
bh  
bi  
Telugu  
Tajik  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Byelorussian  
Bulgarian  
Bihari  
Kirghiz  
Thai  
Latin  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tonga  
Lingala  
ln  
tk  
Laothian  
Lithuanian  
Latvian  
lo  
tl  
lt  
tn  
to  
tr  
lv  
Malagasy  
Maori  
mg  
mi  
mk  
ml  
mn  
mo  
mr  
ms  
mt  
my  
na  
ne  
no  
oc  
om  
or  
Turkish  
Tsonga  
Tatar  
Bislama  
Bengali  
Tibetan  
Breton  
ts  
bn  
bo  
br  
ca  
co  
cs  
cy  
da  
dz  
eo  
et  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
tt  
Twi  
tw  
uk  
ur  
uz  
vi  
Ukrainian  
Urdu  
Catalan  
Corsican  
Czech  
Uzbek  
Malay  
Vietnamese  
Volapük  
Wolof  
Welsh  
Maltese  
Burmese  
Nauru  
vo  
wo  
xh  
yo  
zu  
Danish  
Bhutani  
Esperanto  
Estonian  
Basque  
Persian  
Finnish  
Fiji  
Xhosa  
Nepali  
Yoruba  
Zulu  
Norwegian  
Occitan  
eu  
fa  
Oromo  
Oriya  
fj  
Panjabi  
pa  
pl  
Faroese  
Frisian  
fo  
Polish  
fy  
Pashto,Push  
to  
ps  
qu  
rm  
1619  
1721  
1813  
Irish  
ga  
gd  
gl  
Quechua  
Scots-Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
Rhaeto-  
Romance  
gn  
gu  
ha  
hi  
Kirundi  
rn  
ro  
1814  
1815  
1823  
1901  
Romanian  
Kinyarwanda  
Sanskrit  
rw  
sa  
Hindi  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Remote controller with Other Brand’s  
TVs  
Learning a pre-programming code  
Press some operation buttons  
5
for the component that you want  
to operate to check if the system  
operates properly.  
If the system operates properly, the  
code is correct. If the component does  
not operate properly, return to step 2.  
On  
Standby  
Repeat  
Open/  
Close  
-
A
B
Random  
Play Mode  
Display  
1
4
7
2
5
8
0
3
6
9
Numbers  
Dimmer  
Notes:  
Clear  
Menu  
Top Menu  
Return  
• With some brand’s components, some buttons may not  
work correctly.  
• If more than one code is given in the table, try the code  
one by one until you reach the code for your compo-  
nent (i.e. if the first code does not work, then try the  
next).  
/
/
/
Enter  
Setup  
Enter  
Audio Angle Subtitle Zoom  
Stop  
Play  
Pause  
Up  
Down  
• The code can be retained by changing the batteries  
within 1 minute. If the code is lost, store the pre-pro-  
gramming code again.  
TV Control  
TV/Video Channel  
On/  
Standby  
On/  
Standby  
Volume  
TV Control  
Controlling a TV  
-
RC 536DV  
Press On/Standby to turn on the  
device.  
On/  
1
2
Standby  
You can make RC-536DV remote controller to operate a  
TV from other brand than Integra/Onkyo by storing the  
pre-programming code of the brand in the RC-536DV.  
Find the 3-digit number for the  
Press the desired operation but-  
ton.  
1
brand name of the component  
that you want to operate in the  
table on page 54.  
Channel  
+
: Changes the TV channel  
upward.  
: Changes the TV channel down-  
ward.  
: Increases the TV volume.  
: Decrease the TV volume.  
Turn on the TV that you want to  
operate.  
2
Volume  
While holding down the On/  
Standby on the RC-536DV that  
you want to program, press  
Enter, and then release both but-  
tons.  
3
On/  
Standby  
TV/Video : Switches the TV/VCR  
inputs.  
TV/Video  
(Make sure you press On/Standby  
before Enter.)  
Enter  
Within 10 seconds, enter the 3-  
digit code number.  
4
1
4
7
2
5
8
0
3
6
9
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Remote controller with Other Brand’s TVs—Continued  
Pre-programming Code List  
Brand  
Code  
Brand  
Code  
SAMSUNG  
SANYO  
202, 203, 204, 205, 206, 207, 208  
AIWA  
AKAI  
100. 101  
102, 103, 104  
105  
209, 210, 211, 212  
SCHNEIDER  
SEARS  
103  
AUDIO SONIC  
BELL&HOWELL  
BLAUPUNKT  
BRIONVEGA  
CENTURION  
COLTINA  
CORONAD  
CROWN  
213  
106  
SELECO  
214, 215  
107  
SHARP  
216, 217  
108, 109  
110  
SONY  
218, 219, 220, 221, 222, 223  
SYMPHONIC  
TELEFUNKEN  
THOMSON  
TOSHIBA  
UNIVERSUM  
ZENITH  
224, 225  
201, 226, 227  
228  
111, 112, 113  
114  
115, 116  
213, 229  
230  
DAEWOO  
DUAL  
117, 118, 119, 120, 121  
122  
231, 232  
EMERSON  
FENNER  
123, 124, 125, 126, 127  
128, 129  
FERGUSON  
FISHER  
130, 131  
132  
FUNAI  
133, 134, 135  
FUJITSU GENERAL  
GE • PANA  
GE • RCA  
GOLD STAR  
GOODMANS  
GRUNDIG  
HITACHI  
136, 137,138  
139, 140  
141  
142, 143  
144  
145, 146  
147, 148, 149, 150  
HYPER  
151  
INNO-HIT  
IRRADIO  
JVC  
152  
103  
153, 154, 155, 156, 157  
KENDO  
158  
KTV  
159, 160  
LUXOR  
161  
MAGNAVOX  
MARANTZ  
MARK  
162, 163  
164  
165  
MATSUI  
166, 167, 168, 169  
170, 171, 172, 173  
174, 175  
MITSUBISHI  
MIVAR  
NEC  
176, 177  
NOKIA  
178, 179, 180, 181  
181  
NOKIA OCEANIC  
NORDMENDE  
OKANO  
182, 183  
152  
ORION  
184, 185, 186  
187, 188, 189, 190  
162, 191, 152  
192, 193  
PANASONIC  
PHILIPS  
PIONEER  
PROSCAN  
QUASAR  
RADIOSHARK  
RCA  
194  
195  
196  
141, 197, 198, 110, 199, 200  
201, 182, 183  
SABA  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Analog audio  
JPEG  
An electrical signal that directly represents sound. Com-  
pare this to digital audio which can be an electrical sig-  
nal, but is an indirect representation of sound. See also  
“Digital audio”.  
A file format used for still images, such as photographs  
and illustrations. JPEG files are identified by the file  
extension “.jpg” or “.JPG”. Most digital cameras use this  
format.  
Aspect ratio  
MP3  
The width of a TV screen relative to its height. Conven-  
tional TVs are 4:3 (in other words, the screen is almost  
square); widescreen models are 16:9 (the screen is  
almost twice as wide as it is high).  
MP3 (MPEG1 audio layer 3) is a compressed audio file  
format. Files are recognized by their file extension  
“.mp3” or “.MP3”.  
MPEG audio  
An audio format used on Video CDs and some DVD  
discs. This unit can convert MPEG audio to PCM format  
for wider compatibility with digital recorders and AV  
amplifiers. See also “PCM (Pulse Code Modulation)”.  
Digital audio  
An indirect representation of sound by numbers. During  
recording, the sound is measured at discrete intervals  
(44,100 times a second for CD audio) by an analog-to-  
digital converter, generating a stream of numbers.  
MPEG video  
On playback, a digital-to-analog converter generates an  
analog signal based on these numbers. See also “Sam-  
pling frequency” and “Analog audio”.  
The video format used for Video CDs and DVDs. Video  
CD uses the older MPEG-1 standard, while DVD uses  
the newer and much better quality MPEG-2 standard.  
Dolby Digital  
PBC (PlayBack Control) (Video CD only)  
Using a maximum of 5.1 channels of audio,  
this high quality surround system is used in many of the  
finer movie theaters around the world.  
The on-screen display shows which channels are active,  
for example showing 3/2.1. The 3 being the two front  
channels and the center channel; the 2 being the surround  
channels, and the .1 being the LFE channel.  
A system of navigating a Video CD through on-screen  
menus recorded onto the disc. Especially good for discs  
that you would normally not watch from beginning to  
end all at once—karaoke discs, for example.  
PCM (Pulse Code Modulation)  
The most common system of encoding digital audio,  
found on CDs and DAT. Excellent quality, but requires a  
lot of data compared to formats such as Dolby Digital  
and MPEG audio. For compatibility with digital audio  
recorders (CD, MD and DAT) and AV amplifiers with  
digital inputs, this unit can convert Dolby Digital, DTS  
and MPEG audio to PCM. See also “Digital audio”.  
DRM  
DRM (digital rights management) is a type of server  
software developed to enable secure distribution of paid  
content over the web, recently incorporated by WMA  
(Windows Media Audio ).  
DTS  
Regions (DVD-Video only)  
DTS stands for Digital Theater Systems. DTS is  
a surround system different from Dolby Digital that has  
become a popular surround sound format for movies.  
These associate discs and players with particular areas of  
the world. This unit will only play discs that have com-  
patible region codes. You can find the region code of  
your unit by looking on the rear panel. Some discs are  
compatible with more than one region (or all regions).  
Dynamic range  
The difference between the quietest and loudest sounds  
possible in an audio signal (without distorting or getting  
lost in noise).  
Dolby Digital and DTS soundtracks are capable of a very  
wide dynamic range, delivering dramatic cinema-like  
effects.  
Sampling frequency  
The rate at which sound is measured to be turned into  
digital audio data. The higher the rate, the better the  
sound quality, but the more digital information is gener-  
ated. Standard CD audio has a sampling frequency of  
44.1kHz, which means 44,100 samples (measurements)  
per second. See also “Digital audio”.  
EXIF (Exchangeable Image File)  
A file format developed by Fuji Photo Film for digital  
still cameras. Digital cameras from various manuafctur-  
ers use this compressed file format which carries date,  
time and thumbnail information, as well as the picture  
data.  
WMA  
WMA is short for Windows Media Audio and refers to  
an audio compression technology developed by  
Microsoft Corporation. WMA data can be encoded by  
using Windows Media Player version 8 or Windows  
Media Player for Windows XP.  
File extension  
A tag added to the end of a filename to indicate the type  
of file. For example, “.mp3” indicates an MP3 file.  
ISO 9660 format  
International standard for the volume and file structure  
of CD-ROM discs.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you have any trouble using your DPS-5.4, check the following table for possible causes and remedies. If you still can’t  
resolve the issue yourself, please contact your Integra/Onkyo dealer.  
Symptoms  
Causes  
Remedies  
Connect the power cord to a suitable wall outlet  
(page 22).  
The power cord is not connected.  
The [Power] switch is set to Off.  
Set the [Power] switch to On (page 22).  
Can’t turn on the DPS-5.4?  
Turn off the DPS-5.4, wait five seconds, then try  
External interference is affecting the DPS- turning it on again. If that fails, disconnect the  
5.4’s digital circuitry.  
power cord from the wall outlet, wait five seconds,  
reconnect it, then try turning it on again.  
Place the disc in the center of the disc tray  
(page 25).  
The disc is not centered in the disc tray.  
The disc tray won’t close  
properly?  
The disc is dirty.  
No disc is loaded.  
Remove the disc and clean it (page 10).  
Load a disc (page 25).  
The disc cannot be played because it’s  
incompatible.  
Use only compatible discs (page 8).  
The disc is upside down.  
The disc is not centered in the disc tray.  
The disc is dirty.  
Load the disc the correct way up (page 25).  
Place the disc in the center of the disc tray  
(page 25).  
Can’t start playback?  
Remove the disc and clean it (page 10).  
The disc uses parental lock and the Paren-  
tal Lock function is on.  
Turn off the Parental Lock function (page 47).  
If the region number on the disc does not match  
the region number on the DPS-5.4, the disc can’t  
be played (page 50).  
The DVD-Video disc is intended for use in  
another region.  
The disc is dirty.  
Remove the disc and clean it (page 10).  
The picture distorts occa-  
sionally?  
You’re using the Fast Forward or Fast  
Reverse function.  
A little picture distortion may occur when using  
these functions. This is normal.  
The DPS-5.4 is connected to your TV via a  
VCR or other video equipment and a  
copy-protection system is affecting the  
picture.  
Connect the DPS-5.4 directly to your TV  
(page 18).  
Picture instability or noise?  
No picture?  
The wrong input source is selected on  
your TV.  
On your TV, select the input to which the DPS-5.4  
is connected.  
Check the video cable and correct as necessary  
(page 18).  
The video cable is not connected properly.  
Before you disconnect the power cord, set the  
DPS-5.4 to Standby by pressing the [Standby/On]  
button, and wait until “GOOD BYE” has disap-  
peared from the display.  
If there’s a power failure, or the power  
cord is disconnected inadvertently, any  
settings are lost.  
Settings are not saved?  
The DPS-5.4 is connected to your TV via a  
VCR or other video equipment and a  
copy-protection system is affecting the  
picture.  
Connect the DPS-5.4 directly to your TV  
(page 18).  
Brightness is unstable or  
the picture is noisy?  
Your TV doesn’t support progressive scan-  
ning.  
Reset the DPS-5.4 to its initial settings (page 44).  
Select normal playback (pages 30–34).  
Chapters or tracks don’t  
play in the correct order?  
You are using repeat playback, program  
playback, or random playback.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting—Continued  
Turn off the DPS-5.4, wait five seconds, then turn  
it on again. If that doesn’t resolve the issue, discon-  
nect the power cord from the wall outlet, wait five  
seconds, reconnect it, then try again.  
Buttons on the DPS-5.4 and Power supply voltage fluctuations and  
remote controller don’t  
work?  
other anomalies, such as static electricity,  
can interfere with normal operation.  
The 96 kHz PCM Out setting is set to  
“96 kHz.”  
Change the 96 kHz PCM Out setting to96 kHz >  
48 kHz,or use analog connections (page 43).  
The Digital Out setting is set to “Off.”  
Change the Digital Out setting to “On” (page 43).  
The wrong input source is selected on  
your TV, hi-fi amp, or AV receiver.  
On your TV, hi-fi amp, or AV receiver, select the  
input to which the DPS-5.4 is connected.  
Check the audio cable and correct as necessary  
(page 19).  
The audio cable is not connected properly.  
The TV, hi-fi amp, or AV receiver con-  
nected to the DPS-5.4’s audio outputs is  
either not on or its volume is turned  
down.  
Turn on the TV, hi-fi amp, or AV receiver and set  
its volume as appropriate.  
No sound?  
A DPS-5.4 Digital Audio Out setting is set Check the Digital Audio Out settings and correct  
incorrectly.  
as necessary (page 43).  
Playback is paused.  
Resume playback (page 26).  
DTS audio is only output by the digital outputs. To  
The DVD-Video disc or CD uses the DTS play DTS material you need to connect one of the  
audio format and you are using the analog DPS-5.4’s digital outputs to a digital input on a  
outputs.  
hi-fi amp or AV receiver that has a DTS decoder  
built-in (page 19).  
Set the TV Screen setting to match the aspect ratio  
of your TV (page 44).  
The TV Screen setting is wrong.  
The picture appears  
stretched or the wrong  
shape?  
If you’ve used an S-Video cable to connect your  
TV, in some cases the picture may appear  
stretched. In this case, try changing the S-Video  
Out setting to “S1” (page 45).  
Your TV is connected with an S-Video  
cable.  
Audio CD playback skips or  
jumps or is noisy?  
An audio CD is loaded but  
the DPS-5.4 displays “NO  
DISC”?  
The first track doesn’t play?  
Locating a specific point  
takes longer than usual?  
Copy-controlled CDs are special discs that don’t  
conform to the audio CD standard and, therefore,  
may not work properly with the DPS-5.4.  
The loaded audio CD uses copy control.  
Playback starts in the mid-  
dle of a track?  
Some sections of a track are  
skipped?  
Playback stops in the mid-  
dle of a track?  
The DPS-5.4 displays the  
wrong messages?  
MP3 files without a .mp3” or .MP3” file-  
name extension are not recognized.  
Use the correct filename extension (page 9).  
The DPS-5.4 recognizes only the first 499 folders  
and 999 files. Folders in excess of this aren’t recog-  
nized and cannot be played (page 9).  
The MP3 disc contains over 499 folders  
Some MP3 files don’t play? and 999 files.  
The DPS-5.4 doesn’t fully support multisession  
discs. Only files in the first session can be played  
(page 9).  
The MP3 disc is a multisession disc.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting—Continued  
The disc is not ISO9660 Level 1 or 2 for-  
mat.  
Correct format should be used when recording is  
ISO 9660 and closed session(page 9).  
Can’t play MP3/WMA/  
JPEG discs?  
The disc has not been finalized.  
Finalize the disc (page 9).  
MP3 files without a .mp3” or .MP3” file-  
name extension are not recognized.  
Can’t select MP3 files?  
Can’t play WMA files?  
Use the correct filename extension (page 9).  
WMA files without a .wma” or .WMA”  
filename extension are not recognized.  
Use the correct filename extension (page 9).  
Don’t use the copyright option (page 9).  
Use the correct filename extension (page 9).  
The WMA file’s copyright option is on.  
JPEG files without a .jpg” or .JPG” file-  
name extension are not recognized.  
Can’t view JPEG files?  
Only Baseline JPEG files are supported.  
Progressive JPEG files are not.  
Use Baseline JPEG files (page 9).  
There are no batteries in the remote  
controller.  
Install new batteries (page 11).  
The batteries are flat.  
Replace with new batteries (page 11).  
Check the batteries and correct as necessary  
(page 11).  
The batteries are installed incorrectly.  
You’re not pointing the remote controller Point the remote controller at the DPS-5.4’s  
at the DPS-5.4’s remote sensor.  
remote sensor (page 11).  
Buttons on the DPS-5.4  
work OK but those on the  
remote controller don’t?  
Use the remote controller closer to the DPS-5.4  
(page 11). The remote controller has a range of  
approximately 16 ft. (5 meters).  
You’re too far away from the DPS-5.4.  
Make sure that the DPS-5.4 is not subjected to  
direct sunshine or inverter-type fluorescent lights.  
Relocate if necessary.  
A strong light source is interfering with  
the DPS-5.4’s remote sensor.  
If the DPS-5.4 is installed in a cabinet with  
colored glass doors, the remote controller Open the doors, or use a cabinet without colored  
may not work reliably when the doors are glass.  
closed.  
The DPS-5.4 contains a microcomputer for signal processing and control functions. In very rare situations, severe inter-  
ference, noise from an external source, or static electricity may cause it to lockup. In the unlikely even that this should  
happen, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
North American model: Standard NTSC,  
Australian model: PAL/AUTO  
Video system  
North American model: 1,  
Australian model: 4,  
Region code  
Laser  
Semiconductor laser, wavelength 650 nm (DVD), 780 nm (CD)  
4 Hz–20 kHz @ 48 kHz sampling rate  
4 Hz–44 kHz @ 96 kHz sampling rate  
DVD linear audio  
CD audio  
Frequency response  
4 Hz–20 kHz  
Signal-to-noise ratio (digital audio)  
Audio dynamic range (digital audio)  
Harmonic distortion (digital audio)  
Wow and flutter  
106 dB  
96 dB  
0.008%  
Below measurable level (±0.001% (W. PEAK) or less)  
5˚ to 35˚ C (41˚ F to 95˚ F)  
Install horizontally  
Temperature  
Operating conditions  
Installation  
Y: 1.0 V (p–p), 75 , negative sync, RCA/phono x1, BNC x1  
PB/PR: 0.7 V (p–p), 75 Ω  
COMPONENT VIDEO  
Video outputs  
Audio outputs  
Y: 1.0 V (p–p), 75 , negative sync, 4-pin mini DIN x2  
C: 0.286 V (p–p), 75 Ω  
S VIDEO (S-Video)  
VIDEO (composite video)  
OPTICAL  
1.0 V (p–p), 75 , negative sync, RCA/phono x2  
–22.5 dBm, optical connector x1  
COAXIAL  
0.5 V (p–p), 75 , RCA/phono x1  
ANALOG  
2.0 V rms, 470 , RCA/phono x1  
North American model: 120 V AC, 60 Hz  
Australian model: 100–240 V AC, 50/60 Hz  
Power supply  
Power consumption  
15 W  
General  
Power consumption in  
Standby mode  
North American model: 1.6 W  
Australian model: 2.5 W  
Weight  
3.3 kg (7.3 lbs.)  
Dimensions (W x H x D)  
435 X 81 X 313 mm (17-1/8" X 3-3/16" X 12-5/16")  
Specifications and features subject to change without notice.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integra Division of  
ONKYO U.S.A. CORPORATION  
18 park Way, Upper Saddle River, N.J. 07458, U.S.A.  
Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com  
Integra Division of  
ONKYO CORPORATION  
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN  
Tel: 072-831-8111 Fax: 072-831-8124  
SN29343491  
(C) Copyright 2003 ONKYO CORPORATION Japan. All rights reserved.  
I0306-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Infinity Portable Speaker ERS 610 User Manual
Intel Computer Hardware ADE 6050 User Manual
Invacare Bathroom Aids 6358 User Manual
Jabra Bluetooth Headset GN1215 User Manual
Jenn Air Cooktop CCE1400 User Manual
Jet Tools Saw HBS 814GH User Manual
JVC CD Player KD G320 User Manual
Kalorik Mixer USK HM 32594 User Manual
Kenwood Marine Radio TS 520S User Manual
Konexx Telephone Office Konnector User Manual