Indesit Refrigerator PBAAAXXXX User Manual

PBAxxxx  
PBAAxxxx  
PBAAAxxxx  
English  
Operating Instructions  
REFRIGERATOR/FREEZER COMBINATION  
Contents  
Operating Instructions, 1  
Assistance, 2  
Description of the appliance, 3  
Description of the appliance, 4  
Reversible doors, 5  
Installation, 6  
Start-up and use, 7  
Maintenance and care, 8  
Precautions and tips, 9  
Troubleshooting, 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the appliance  
Control panel  
1. ON/OFF  
The entire product (both the refrigerator and freezer compartments)  
may be switched on by pressing this button. The red LED indicates  
that the product is switched off, while the green LED shows that it is  
operating.  
2. REFRIGERATOR - and + temperature adjustment  
Used to modify the temperature setting of the refrigerator; confirmation  
corresponding to the selected temperature appears on the display.  
3. Refrigerator display  
Shows the set temperature for the refrigerator compartment.  
4. ECO  
Controls the activation and deactivation of the ECO function (optimal  
operating temperature for minimal energy consumption). When this  
function is activated, the ECO LED on the keypad lights up.  
Press and hold the ECO button for 8 seconds so that the  
corresponding LED begins to flash; this will allow you to set the  
temperature to +4°,+5°,+6° in the Refrigerator compartment and -18°,-  
19°,-20° in the Freezer compartment.Ten minutes after the most  
recent user interaction, the display enters its energy saving mode  
(all LEDs switch off, except the ON/OFF and PRIME indicator  
lights). To exit the energy saving mode, simply press any button  
or open the refrigerator door.  
5. FREEZER TEMPERATURE ALARM  
The temperature of the freezer has exceeded the safety threshold for  
optimal food storage (see Troubleshooting section)  
6. DOOR OPEN ALARM  
The refrigerator door has been open for more than two minutes (see  
Troubleshooting section)  
7.  
(intelligent operation)  
LED  
The PRIME LED indicates that the product is controlling the internal  
temperature so as to optimise it.  
8. CHILD LOCK  
Activates or deactivates the control panel button lock in order to avoid  
the risk of the various functions being activated accidentally by  
children. The CHILD LOCK LED on the keypad lights  
up.  
9. FREEZER - and + temperature adjustment  
Used to modify the temperature setting of the freezer;  
confirmation corresponding to the selected  
temperature appears on the display.  
1
2
10. FREEZER display  
Shows the set temperature for the freezer  
compartment.  
11. SUPER COOL  
3
Activates or deactivates the SUPER COOL function  
(rapid cooling). The SUPER COOL LED on the  
keypad lights up and ‘SC’ appears on the refrigerator  
7
display.  
6
5
12. SUPER FREEZE  
Activates or deactivates the SUPER FREEZE function  
(rapid freezing). The SUPER FREEZE LED on the  
keypad lights up and ‘SF’ appears on the freezer  
display.  
10  
9
4
13. HOLIDAY  
Activates or deactivates the HOLIDAY function (the  
HOLIDAY LED on the keypad lights up), while the  
temperature values +12°C and -18°C appear on the  
refrigerator and freezer displays respectively. Ten  
13  
11  
12  
minutes after the most recent user interaction, the  
display enters its energy saving mode (see ECO  
function).  
8
14. ICE PARTY  
Activates the ICE PARTY function (the temperature  
14  
is decreased for the amount of time it takes to cool a  
bottle). The ICE PARTY LED on the keypad lights  
up.  
  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the appliance  
Overall view  
The instructions contained in this manual are applicable to different  
model refrigerators. The diagrams may not directly represent the  
appliance purchased. For more complex features, consult the following  
pages.  
1 Levelling FEET  
2 STORAGE compartment  
3 Ice3 Ice tray *.  
4 FREEZER and STORAGE compartment  
5 FRUIT and VEGETABLE bin *  
6 FRESH BOX for MEAT and CHEESE *  
7 WINE RACK *  
8 SHELVES *  
9 LAMP (see Maintenance).  
10 Removable multipurpose SHELVES  
11 BOTTLE shelf  
*Varies by number and/or position, available only on certain models.  
9
8
10  
11  
7
6
8
5
3
4
3
10  
2
Completo Prime Display TIF  
1
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reversible doors  
If it is necessary to change the direction in which the doors open, please  
contact the Technical Assistance Centre.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
GB  
Changing the plug:  
Removing the plug  
If your appliance has a non-rewireable moulded plug and you should  
wish to remove it to add a longer cable or to re-route the mains cable  
through partitions, units etc. please ensure that either:  
!Before placing your new appliance into operation please read these  
operating instructions carefully. They contain important information for  
safe use, for installation and for care of the appliance.  
-
The plug is replaced by a fused 13amp re-wireable plug bearing  
the BSI mark of approval.  
! Please keep these operating instructions for future reference. Pass  
them on to possible new owners of the appliance.  
or  
-
The mains cable is wired directly into a 13amp cable outlet,  
controlled by a switch (in compliance with BS 5733) which is  
accessible without moving the appliance.  
Positioning and connection  
Positioning  
1. Place the appliance in a well-ventilated humidity-free room.  
2. Do not obstruct the rear fan grills. The compressor and condenser  
give off heat and require good ventilation to operate correctly and  
save energy.  
3. Leave a space of at least 10 cm between the top part of the  
appliance and any furniture above it, and at least 5 cm between  
the sides and any furniture/side walls.  
Disposing of the plug  
Cut off and dispose of the supplied plug if it does not fit your socket. The  
cable should be cut as close as possible to the moulded plug.  
Remove the fuse.  
4. Ensure the appliance is away from any sources of heat (direct  
sunlight, electric stove, etc.).  
5. In order to maintain the correct distance between the appliance  
and the wall behind it, fit the spacers supplied in the installation kit,  
following the instructions provided.  
WARNING:  
To avoid a shock hazard do not insert the discarded plug  
into a socket anywhere else.  
Fitting a new plug  
Levelling  
IMPORTANT:  
1. Install the appliance on a level and rigid floor.  
2. If the floor is not perfectly horizontal, adjust the refrigerator by  
tightening or loosening the front feet.  
WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE  
WITH THE FOLLOWING CODE...  
Electrical connections  
After the appliance has been transported, carefully place it vertically  
and wait at least 3 hours before connecting it to the electricity mains.  
Before inserting the plug into the electrical socket ensure the following:  
• The appliance is earthed and the plug is compliant with the law.  
• The socket can withstand the maximum power of the appliance,  
which is indicated on the data plate located on the bottom left side  
of the fridge (e.g. 150 W).  
• The voltage must be in the range between the values indicated on  
the data plate located on the bottom left side (e.g. 220-240V).  
• The socket is compatible with the plug of the appliance. If the  
socket is incompatible with the plug, ask an authorised technician  
to replace it (see Assistance). Do not use extension cords or  
multiple sockets.  
Green and Yellow  
Blue  
Brown  
- Earth  
- Neutral  
- Live  
!Once the appliance has been installed, the power supply cable and  
the electrical socket must be easily accessible.  
! The cable must not be bent or compressed.  
! The cable must be checked regularly and replaced by authorised  
technicians only (see Assistance).  
As the colours of the wires in the mains lead may not correspond with  
the coloured markings identifying the terminals in your plug, proceed  
as follows:  
-
Connect Green and Yellow wire to terminal marked 'E' or  
or  
! The manufacturer declines any liability should these  
safety measures not be observed.  
coloured Green and Yellow.  
Connect Brown wire to terminal marked 'L' or coloured red or  
brown.  
Connect Blue wire to terminal marked 'N' or coloured Black or  
Blue.  
-
-
Your appliance is supplied with a 13amp fused plug that can be  
plugged into a 13amp socket for immediate use. Before using the  
appliance please read the instructions below.  
If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse.  
WARNING:  
THIS APPLIANCE MUST BE EARTHED.  
If you are in any doubt about the electrical supply to your  
machine, consult a qualified electrician before use.  
Replacing fuse covers:  
When replacing a faulty fuse, a 13amp ASTA approved fuse to BS  
1362 should always be used and the fuse cover re-fitted.  
If the fuse cover is lost, the plug must not be used until a replacement  
is obtained.  
CE Marking certifies that this appliance conforms to the  
following EEC directives:  
Low Voltage Equipment - 73/23/EEC & 93/68 EEC  
Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/  
68/EEC  
Replacement fuse covers:  
If a replacement fuse cover is fitted, it must be of the correct colour as  
indicated by the coloured marking or the colour that is embossed in  
words on the base of the plug.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Child Lock  
Start-up and use  
To activate the Child Lock function, press and hold the Child Lock GB  
button for 2 seconds; the activation of this button lock is confirmed by  
a short beep and the illumination of the corresponding LED on the  
keypad. To deactivate the function, press and hold the Child Lock  
button for 2 seconds; deactivation will be confirmed by a short beep  
and by the corresponding LED switching off.  
Starting the appliance  
! After transportation of the appliance, carefully place it in an upright  
position and wait at least 3 hours before connecting it to the electricity  
mains, to make sure it operates as it should.  
• Clean the inside of the refrigerator well using warm water and  
bicarbonate of soda before placing food inside it.  
• The appliance comes with a motor protection control system which  
makes the compressor start approximately 8 minutes after being  
switched on. The compressor also starts each time the power  
supply is cut off whether voluntarily or involuntarily (blackout).  
Chiller system  
No Frost  
Freezer Compartment  
When the product is switched on the freezer compartment is set to its  
default value of -18°C. We recommend that the SUPER FREEZE  
function is set (the freezer status bar continues to display the set  
value) in order to accelerate the cooling process of the compartment;  
whentheinsideofthecompartmenthasreacheditsoptimaltemperature  
the function will be deactivated and the food may be placed inside.  
Refrigerator Compartment  
When the appliance is switched on the refrigerator compartment is  
set to its default value of +5°C. We recommend that the SUPER COOL  
function is set (the refrigerator status bar continues to display the set  
value) in order to accelerate the cooling process of the compartment.  
After a few hours it will be cool enough for food to be placed inside.  
The No Frost system circulates cold air continuously to collect humidity  
and prevent ice and frost formation. The system maintains an optimal  
humidity level in the compartment, preserving the original quality of  
the food, preventing the food from sticking together and making  
defrosting a thing of the past. Do not block the aeration cells by  
placing food or containers in direct contact with the refrigerating back  
panel. Close bottles and wrap food tightly.  
Navigating the display  
Setting the temperatures:  
If the product is switched on, the refrigerator and freezer compartment  
displays will indicate the temperature values set at that moment. To  
change them, simply press the -and + buttons corresponding to the  
compartment for which you wish to change the set temperature. More  
specifically, each time the buttons are pressed, the temperature  
increases or decreases and the level of cold generated inside the  
compartment is adjusted accordingly. The temperature values that  
may be selected for the refrigerator compartment are +8°C, +7°C,  
+6°C, +5°C, +4°C, +3°C and +2°C, while the values that may be set  
for the freezer are -18°C, -19°C, -20°C, -21°C, -22°C, -24°C and -  
26°C.  
When the “ECO” function is active, the appliance automatically adjusts  
the temperatures according to the conditions inside and outside the  
refrigerator, in order to minimise the amount of energy consumed; the  
activation of this function is signalled by the ECO LED on the keypad  
lighting up.  
Using the refrigerator to its full potential  
• Adjust the temperature using the display.  
• ActivatetheSUPERCOOLfunctiontolowerthetemperaturequickly,  
for example, when you place a large number of new food items  
inside a fridge and the internal temperature rises slightly. This  
function quickly cools the groceries by temporarily reducing the  
temperature until it reaches the ideal level.  
• Place only cold or lukewarm foods in the compartment, never hot  
foods (see Precautions and tips).  
• Remember that cooked foods do not last longer than raw foods.  
• Do not store liquids in open containers: they will increase the level  
of humidity in the refrigerator and cause condensation to form.  
SHELVES: with or without grill.  
Due to the special guides the shelves are removable and the height is  
adjustable (seediagram), allowingeasystorageoflargecontainersand  
food. Height can be adjusted without complete removal of the shelf.  
When the HOLIDAY function is active the temperature may not be  
adjusted, however the appliance adjusts itself automatically so that  
the optimal settings for the situation are used: +12°Cfor the refrigerator  
compartment and -18°C for the freezer compartment. The activation  
of this function is indicated by the HOLIDAY LED lighting up.  
To activate and deactivate the functions, simply press the relevant  
button; the function status will be signalled by the corresponding LED  
on the keypad switching on or off.  
Severalofthefunctions(SUPERCOOL, SUPERFREEZE, ICEPARTY,  
ECO) are incompatible with others (HOLIDAY,...); remember that  
there is a pre-established order of priority which will help you to  
operate the product in the best possible way.  
When the ICE PARTY function has finished, press the ICE PARTY  
button to stop the corresponding LED from flashing and to silence the  
sound alert. The flashing and sound alerts indicate that the function is  
complete and that the bottle should be removed from the freezer  
compartment.  
TEMPERATURE Indicator light*: to identify the coldest area in the  
refrigerator.  
1. Check that OK appears clearly on the indicator light (see diagram).  
*Varies by number and/or position, available only on certain models.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. If the word “OK” does not appear it means that the temperature is  
too high: adjust the REFRIGERATOR OPERATION knob to a higher  
position (colder) and wait approximately 10 hours until the  
temperature has been stabilised.  
GB  
3. Check the indicator light again: if necessary, readjust it following  
the initial process. If large quantities of food have been added or if  
the refrigerator door has been opened frequently, it is normal for  
the indicator not to show OK. Wait at least 10 hours before adjusting  
the REFRIGERATOR OPERATION knob to a higher setting.  
MAX  
WATER LEVEL  
FRESH BOX*  
This is the new box to keep meat, fish and cheese fresh. When  
positioned in the “lower” part of the fridge compartment, it is ideal for  
meat and fish; when moved to the “top” part of the fridge, it is perfect  
for cheese.It can be taken out of the fridge when it is not needed.  
Using the freezer to its full potential  
• Adjust the temperature using the display.  
• To freeze fresh food in the best and safest way possible, activate  
the SUPER FREEZE function 24 hours before placing the food  
in the freezer. After placing the food inside, activate the SUPER  
FREEZE function again; it will be deactivated automatically after  
24 hours.  
• Fresh food that needs to be frozen must not come into contact with  
food that has already been defrosted. Fresh food must be stored  
in the top FREEZER and STORAGE compartment where the  
temperature drops below -18°C and guarantees rapid freezing.  
• Do not re-freeze food that is defrosting or that has already been  
defrosted. These foods must be cooked and eaten (within 24  
hours).  
Maintenance and care  
Switching the appliance off  
During cleaning and maintenance it is necessary to disconnect the  
appliance from the electricity supply:  
• Do not place glass bottles which contain liquids, and which are  
corked or hermetically sealed in the freezer because they could  
break.  
1. Press the ON/OFF button to switch off the appliance.  
2. Pull the plug out of the socket.  
• The maximum quantity of food that may be frozen daily is indicated  
on the plate containing the technical properties located on the  
bottom left side of the refrigerator compartment (for example: Kg/  
24h: 4).  
! If this procedure is not followed, the alarm may sound. This alarm  
does not indicate a malfunction. To restore normal operation, hold the  
ON/OFF button down for more than two seconds. To disconnect the  
appliance, follow points 1 and 2 above.  
! Do not open the door during freezing.  
Cleaning the appliance  
! If there is a power cut or malfunction, do not open the freezer door.  
This will help maintain the temperature inside the freezer, ensuring  
that foods are conserved for at least 9 -14 hours.  
!to avoid blocking the air circulation inside the freezer compartment,  
it is advisable not to obstruct the ventilation holes with food or  
containers.  
• We recommend you clean your fridge with our Professional Fridge  
cleaner.To order please call us on 08448 225 225 or visit  
• The external and internal parts, as well as the rubber seals may be  
cleaned using a sponge that has been soaked in lukewarm water  
and bicarbonate of soda or neutral soap. Do not use solvents,  
abrasive products, bleach or ammonia.  
Ice3 ice tray  
• The removable accessories may be soaked in warm water and  
soap or dishwashing liquid. Rinse and dry them carefully.  
• The back of the appliance may collect dust which can be removed  
by delicately using the hose of a vacuum cleaner set on medium  
power. The appliance must be switched off and the plug must be  
pulled out before cleaning the appliance.  
The fact that they are situated on the top part of the freezer drawers  
ensures greater cleanliness: the ice no longer comes into contact with  
the food placed inside the freezer compartment; furthermore, the  
dripping of the water during filling is avoided (a lid to cover up the hole  
after filling with water is also provided).  
1. Pull out the tray by pushing it up. Check that the tray is ompletely  
empty and fill it with water through the opening provided.  
2. Take care not to exceed the level indicated (MAX WATER LEVEL).  
Excess water prevents the ice cubes from dispensing (if this  
happens, wait for the ice to melt and empty the tray).  
3. Turn the tray 90°: due to the connected compartments each mould  
fills with water (see diagram).  
4. Close the opening with the lid provided and put the tray back,  
placing the top part in the corresponding housing and allowing it to  
drop in again.  
Avoiding mould and unpleasant odours  
• The appliance is manufactured with hygienic materials which are  
odour free. In order to maintain an odour free refrigerator and to  
prevent the formation of stains, food must always be covered or  
sealed properly.  
• If you want to switch the appliance off for an extended period of  
time, clean the inside and leave the doors open.  
*
Replacing the light bulb  
5. When the ice has formed (minimum time approximately 8 hours)  
knock the tray against a hard surface and wet the outside so that  
the ice cubes come loose and take them out through the opening.  
• We recommend you clean your fridge with our Professional Fridge  
cleaner.To order please call us on 08448 225 225 or visit  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
To replace the light bulb in the refrigerator compartment, pull out the  
plug from the electrical socket. Follow the instructions below.  
Access the light bulb by removing the cover as indicated in the  
diagram. Replace it with a similar light bulb within the power range  
indicated on the cover.  
responsible for their safety. Children should be supervised to  
ensure that they do not play with the appliance.  
• Keep packaging material out of the reach of children! It can become  
a choking or suffocation hazard.  
GB  
Disposal  
• Observe local environmental standards when disposing packaging  
material for recycling purposes.  
• The European Directive 2002/96/EC on Waste Electrical and  
Electronic Equipment (WEEE), requires that old household electrical  
appliancesmustnotbedisposedofinthenormalunsortedmunicipal  
waste stream. Old appliances must be collected separately in  
order to optimise the recovery and recycling of the materials they  
contain and reduce the impact on human health and the  
environment. The crossed out “wheeled bin” symbol on the product  
reminds you of your obligation, that when you dispose of the  
appliance it must be separately collected. Consumers should  
contact their local authority or retailer for information concerning  
the correct disposal of their old appliance.  
1
1
2
Precautions and tips  
Respecting and conserving the environment  
• Install the appliance in a fresh and well-ventilated room. Ensure  
that it is protected from direct sunlight and do not place it near heat  
sources.  
• Try to avoid keeping the door open for long periods or opening the  
door too frequently in order to conserve energy.  
• Do not fill the appliance with too much food: cold air must circulate  
freely for food to be preserved properly. If circulation is impeded,  
the compressor will work continuously.  
• Do not place hot food directly into the refrigerator. The internal  
temperature will increase and force the compressor to work harder  
and will consume more energy.  
!The appliance was designed and manufactured in compliance with  
international safety standards. The following warnings are provided  
for safety reasons and must be read carefully.  
This appliance complies with the following Community Directives:  
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments;  
-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and  
subsequent amendments;  
- 2002/96/CE..  
• Defrost the appliance if ice forms (see Maintenance). A thick layer  
of ice makes cold transference to food products more difficult and  
results in increased energy consumption.  
General safety  
• The appliance was designed for domestic use inside the home  
and is not intended for commercial or industrial use.  
• The appliance must be used to store and freeze food products by  
adults only and according to the instructions in this manual.  
• The appliance must not be installed outdoors, even in covered  
areas. It is extremely dangerous to leave the appliance exposed  
to rain and storms.  
• Do not touch the appliance with bare feet or with wet or moist  
hands and feet.  
• Do not touch the internal cooling elements: this could cause skin  
abrasions or frost/freezer burns.  
• When unplugging the appliance always pull the plug from the mains  
socket, do not pull on the cable.  
• Before cleaning and maintenance, always switch off the appliance  
and disconnect it from the electrical supply. It is not sufficient to set  
the temperature adjustment knobs on ON/OFF (appliance off) to  
eliminate all electrical contact.  
Troubleshooting  
If the appliance does not work, before calling for Assistance (see  
Assistance), check for a solution from the following list.  
The display is completely switched off.  
• The plug has not been inserted into the electrical socket, or not far  
enough to make contact, or there is no power in the house.  
The motor does not start.  
• The appliance comes with a motor protection control (see Start-up  
and use).  
The display is on but it is dim.  
• Pull out and reverse the plug before putting it back in the socket.  
• In the case of a malfunction, under no circumstances should you  
attempt to repair the appliance yourself. Repairs carried out by  
inexperienced persons may cause injury or further malfunctioning  
of the appliance.  
• Do not use any sharp or pointed utensils or electrical equipment -  
other than the type recommended by the manufacturer - inside the  
frozen food storage compartments.  
The alarm sounds and DOOR OPEN ALARM flashes on the  
display (“d” is displayed instead of the REFRIGERATOR  
temperature).  
• The refrigerator door has been open for more than two minutes.  
Thesoundalertstopswhenthedoorisclosedorwhentheappliance  
is switched off and on again.  
• Do not put ice cubes taken directly from the freezer into your  
mouth.  
• This appliance is not intended for use by persons (including  
children) with reduced physical, sensory or lack of experience  
and knowledge unless they have been given supervision or  
instruction concerning use of the appliance by a person  
The alarm sounds and TEMPERATURE ALARM flashes on the  
display (“A1” is displayed instead of the FREEZER  
temperature).  
• The temperature inside the freezer is too high. The freezer will  
maintain a temperature of around 0°C so that the food will not  
refreeze, allowing you to eat it within 24 hours or to refreeze it after  
it has been cooked.  
To switch off the buzzer, open and close the appliance door or  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
press the + and – freezer temperature adjustment buttons once.  
Press these buttons a second time to display the set value on the  
freezer display, switch off the TEMPERATURE ALARM LED and  
restore normal operation.  
GB  
The alarm sounds and temperature alarm flashes on the  
display (“A2” is displayed instead of the FREEZER  
temperature).  
• The temperature of the freezer is dangerously high: the food inside  
must not be eaten. The freezer will maintain a temperature of  
approximately -18°C.  
To switch off the buzzer, open and close the appliance door or  
press the + and – freezer temperature adjustment buttons once.  
Press these buttons a second time to display the set value on the  
freezer display, switch off the TEMPERATURE ALARM LED and  
restore normal operation.  
The refrigerator and the freezer do not cool well.  
• The doors do not close properly or the seals are damaged.  
• The doors are opened too frequently.  
• The temperature that has been set is too high (see Start-up and  
use).  
• The refrigerator or the freezer have been over-filled.  
The food inside the refrigerator is beginning to freeze.  
• The temperature that has been set is too low (see Start-up and  
use).  
The motor runs continuously.  
• The SUPER FREEZE button has been pressed (rapid freezing):  
the yellow SUPER FREEZE light is on or flashing (see Description).  
• The door is not closed properly or is continuously opened.  
• The outside ambient temperature is very high.  
The appliance makes a lot of noise.  
• The appliance has not been installed on a level surface (see  
Installation).  
• The appliance has been installed between cabinets that vibrate  
and make noise.  
• The internal refrigerant makes a slight noise even when the  
compressor is off. This is not a defect, it is normal.  
Early ending of functions  
• Electrical disturbance on the network or brief interruptions of the  
power supply.  
Don’t forget should our advice fail to resolve the problem with  
your appliance please call us on 08448 224 224 to arrange an  
engineer visit. Or visit www.indesitservice.co.uk  
Product failures are fully covered by your 12 months parts and  
labour guarantee. However, if we attend and there is no  
product failure or the failure has been caused by damage,  
misuse or by incorrect installation, charges will apply.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
195090014.01  
05/2011  
GB  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  

InFocus Projector SP CEIL 001 User Manual
Invacare Wheelchair ACC260 User Manual
John Deere Utility Vehicle XUV 620i User Manual
Johnson Controls Humidifier AVC Series User Manual
JVC Flat Panel Television GR D20 User Manual
JVC Stereo System CA MXJ150R User Manual
Jwin Cordless Telephone JT P570 User Manual
Kenwood Car Video System DDX7032 User Manual
Kenwood Two Way Radio TK 5400 User Manual
Knoll Systems Projector HDP404 User Manual