Gravely Lawn Mower 985114 16 HP User Guide

Professional 2-WheelTractor  
Owner/Operator Manual  
Models  
985114 - 16 HP  
985115 - 8.5 HP  
985117 - 13.5 HP  
08468600E 6/00  
Supersedes 08468600,A-D  
Printed in USA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Controls and Features. . . . . . . . . . . . . . . . . . . . . 2  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Service and Adjustments . . . . . . . . . . . . . . . . . 15  
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
INTRODUCTION  
THE MANUAL  
PRODUCT REGISTRATION  
Before operation of unit, carefully and completely read  
your manuals. The contents will provide you with an  
understanding of safety instructions and controls  
during normal operation and maintenance.  
A warranty registration card must be filled out, signed,  
and returned at time of purchase. This card activates  
the warranty. Claims meeting requirements during  
limited warranty period will be honored.  
All reference to left, right, front, or rear are given from  
operator standing in operation position and facing the  
direction of forward travel.  
UNAUTHORIZED REPLACEMENT PARTS  
Use only Gravely replacement parts. The replacement  
of any part on this vehicle with anything other than a  
Gravely authorized replacement part may adversely  
affect the performance, durability, or safety of this unit  
and may void the warranty. Gravely disclaims liability  
for any claims or damages, whether warranty, property  
damage, personal injury or death arising out of the use  
of unauthorized replacement parts.  
MODEL AND SERIAL NUMBERS  
When ordering replacement parts  
Transfer  
model & serial  
number label  
from product  
registration  
here.  
or making service inquiries, know  
the Model and Serial numbers of  
your unit and engine.  
Numbers are located on the product  
registration form in the unit literature  
package.They are also printed on a  
serial number label, located on the  
frame of your unit.  
DISCLAIMER  
Gravely reserves the right to discontinue, make  
changes to, and add improvements upon its products  
at any time without public notice or obligation.The  
descriptions and specifications contained in this  
manual were in effect at printing. Equipment described  
within this manual may be optional. Some illustrations  
may not be applicable to your unit.  
Serial  
Number  
Label  
Record Engine Model and Serial numbers here.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
SAFETY ALERTS  
PRACTICES AND LAWS  
Look for these symbols to point out  
important safety precautions. They mean:  
Practice usual and customary safe working  
precautions, for the benefit of yourself and others.  
Understand and follow all safety messages. Be alert to  
unsafe conditions and the possibility of minor,  
moderate, or serious injury or death. Learn applicable  
rules and laws in your area.  
Attention!  
Personal Safety Is Involved!  
Become Alert!  
REQUIRED OPERATOR TRAINING  
Obey The Message!  
Original purchaser of this unit was instructed by the  
seller on safe and proper operation. If unit is to be used  
by someone other than original purchaser; loaned,  
rented or sold, ALWAYS provide this manual and any  
needed safety training before operation.  
The safety alert symbol is used in decals on the unit  
and with proper operation procedures in this manual.  
Understand the safety message. It contains important  
information about personal safety on or near the unit.  
DANGER: IMMINENTLY HAZARDOUS  
SITUATION! If not avoided, WILL RESULT  
in death or serious injury.  
WARNING: POTENTIALLY HAZARDOUS  
SITUATION! If not avoided, COULD  
RESULT in death or serious injury.  
CAUTION: POTENTIALLY HAZARDOUS  
SITUATION! If not avoided, MAY RESULT  
in minor or moderate injury. It may also be  
used to alert against unsafe practices.  
NOTATIONS  
NOTE: General reference information for proper  
operation and maintenance practices.  
IMPORTANT: Specific procedures or information  
required to prevent damage to unit or attachment.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY DECALS AND LOCATIONS  
ALWAYS replace missing or damaged Safety Decals.  
Refer to figure below for Safety Decal locations.  
THROTTLE  
MADE IN U.S.A.  
2
FAST  
Units with  
SLOW  
IGNITION  
Briggs & Stratton  
Engines  
!
SAFETY FIRST  
READ THE OPERATOR'S MANUALS BEFORE OPERATING  
OR SERVICING THIS EQUIPMENT.  
DISENGAGE PTO AND SHIFT INTO NEUTRAL BEFORE  
STARTING ENGINE.  
NEVER ALLOW CHILDREN TO OPERATE THE EQUIPMENT.  
KEEP HANDS AND FEET AWAY FROM MOVING PARTS.  
STAY ALERT FOR PERSONS AND HAZARDS.  
BEFORE LEAVING OPERATOR'S POSITION:  
PUT PTO CONTROL IN THE OUT POSITION.  
REMOVE IGNITION KEY.  
ENGAGE FWD  
PUSH OFF  
PTO  
HIGH-PUSH  
CHOKE  
RANGE  
PULL ON  
PUSH OFF  
REV AND HI  
LO CONTROLS.  
PULL ON  
LOW-PULL  
1
N
Units with  
Robin Engines  
DANGER  
TO AVOID SERIOUS INJURY OR DEATH  
Read the operator's manual.  
If machine stops going uphill, stop blade and  
Do not mow when children or others are  
around.  
back down slowly.  
Avoid sudden turns.  
H
Look down and behind before and while  
backing.  
Keep safety devices (guards, shields, switches,  
etc.)in place and working.  
Never carry children.  
Check interlock system per manual before use.  
Understand location and function of all controls.  
Remove objects that could be thrown by  
the blade.  
L
When parking on  
the wheels.  
a
slope always chock or block  
Go across slopes, not up and down.  
077478  
DANGER  
!
SAFETY FIRST  
4
READ THE OPERATOR'S MANUAL  
BEFORE USING TRACTOR  
BRAKE  
LOCK  
P
DISENGAGE ALL CLUTCHES AND  
CAUTION  
SHIFT INTO NEUTRAL BEFORE  
STARTING ENGINE  
HANDLE  
KEEP  
3
GASOLINE WITH CARE  
DO NOT PARK ON SLOPE UNLESS WHEELS ARE CHOCKED.  
SHIELDS, GUARDS AND SAFETY  
DEVICES IN PLACE KEEP  
HANDS AND FEET AWAY FROM  
MOVING PARTS NEVER LET  
Units with  
Briggs & Stratton  
Engines  
CHILDREN OPERATE TRACTOR  
BE ALERT FOR DANGER TO BY-  
STANDERS, PROPERTY AND FOR  
TERRAIN HAZARDS REMOVE  
IGNITION KEY BEFORE LEAVING  
TRACTOR ENGAGE FWD REV  
-
RELEASE  
CONTROL AND HI  
-
LO GEAR  
CONTROLS WHEN PARKING  
077247  
Units with Steering Brakes  
OH0251  
1. DANGER! To avoid serious injury or death.  
Never carry children.  
Read Operators Manual.  
Remove objects that could be  
thrown by the blade.  
Do not mow when children or others  
are around.  
Go across slopes, not up and down.  
If machine stops going uphill, stop blade  
and back down slowly  
Avoid sudden turns.  
Look down and behind before and while  
backing  
Keep safety devices (guards, shields,  
switches, etc.) in place and working.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. CAUTION  
Check interlock system per manual before  
use.  
Do not park on slope unless wheels are  
chocked.  
Understand location and function of all  
controls.  
SAFETY RULES  
Preparation  
When parking on a slope always chock or  
block the wheels.  
Improper use of this tractor can injure people and  
damage the equipment. People using or servicing this  
tractor must read and follow the instructions in this  
manual.  
2. Safety First  
Read the operators manuals before  
operating or servicing this equipment.  
It is important to understand that this manual and any  
other Gravely instruction manuals do not cover every  
possible danger. It is impossible for Gravely to know of  
all possible dangers in operating and servicing the  
tractor and attachments.  
Disengage the PTO and shift into neutral  
before starting engine.  
Never allow children to operate the  
equipment.  
The purchaser must give these instructions to the  
people operating and maintaining this tractor. These  
people must use eye and foot protection.  
Keep hands and feet away from moving  
parts.  
Read this manual, the attachment manual and the  
engine manual carefully before operating unit.  
Stay alert for persons and hazards.  
Learn the location and function of all controls.  
Know how to stop in an emergency.  
Before leaving operators position:  
- Put PTO control in the out position.  
- Remove ignition key.  
Understand and follow each danger, warning, caution  
and instruction decal installed on this product.  
- Engage FWD-REV and Hi-Lo controls.  
Never permit children to operate the unit. Do not allow  
adults to operate it without proper instruction.  
3. Safety First  
Safe operation of this equipment requires your  
complete and unimpaired attention at all times. Do not  
operate unit after or during the use of drugs or alcohol.  
Read the operators manuals before using  
tractor.  
Keep all people and animals away from the operating  
area.  
Disengage all clutches and shift into  
neutral before starting engine.  
Use caution with gasoline. Gasoline is very ammable  
and its vapors are explosive. Keep it in a clean, tight  
and approved (Red) container. Never put gasoline in  
the fuel tank while the engine is running or hot. Clean  
up spilled gasoline before starting engine. Do not ll  
fuel tank indoors. Never allow smoking materials,  
sparks or ame (match, pilot light, etc.) near mower or  
fuel container. Replace fuel tank cap and fuel container  
cap securely.  
Handle gasoline with care.  
Keep shields, guards and safety devices in  
place.  
Keep hands and feet away from moving  
parts.  
Inspect area of operation and remove all material  
which could be thrown by the attachment such as  
stones, sticks, wires and other foreign objects.  
Never let children operate tractor.  
Be alert for danger to bystanders, property  
and for terrain hazards.  
When transporting the unit, connect the chassis to the  
transport vehicle. Never secure by control levers, rods,  
or like items that could be damaged.  
Remove ignition key before leaving tractor.  
Replace all parts that become damaged or lost.  
Engage FWD-REV control and Hi-Lo gear  
controls when parking.  
Wear hand, foot, head, ear and eye protection. Do not  
wear loose clothing which might get caught in rotating  
parts.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before leaving the operators position, put the PTO  
lever in the OFFposition, turn off and remove ignition  
key. Move the shift control to rst gear position.  
Operation  
Be certain that all shields, guards, and interlock  
switches are in the correct position and operating  
properly.  
Do not touch parts which might be hot from operation.  
Before attempting to maintain, adjust or service allow  
hot parts to cool.  
Before starting the engine, put the PTO lever in the  
OFFposition and the gear shift lever in the neutral N”  
position.  
Maintenance and Storage  
Check the operation of the operator presence controls  
before operating the tractor. With either the PTO or the  
direction control lever engaged, the engine should run  
only if at least one of the operator presence switches is  
depressed.  
Keep the equipment in good condition. Maintain it as  
directed in this manual. Check all hardware at regular  
intervals.  
Use only Gravely accessories, attachments and  
replacement parts.  
Do not use the equipment in the dark without adequate  
lighting.  
Do not overspeed the engine. Do not override the  
governor.  
Keep away from moving parts. Stay clear of the  
attachment when the engine is running.  
Before making any repairs or adjustments, disengage  
the PTO, turn off and remove the ignition key and wait  
for all motion to stop.  
Do not let people other than the operator near the  
operating equipment. Never direct discharge of  
material towards bystanders. The operator is  
responsible for the safety of bystanders.  
To reduce re hazard and overheating, keep equipment  
free of grass, leaves, debris or excessive lubricants.  
Worn out mufers can result in re or explosion and  
Operate the attachment only on safe surfaces as  
prescribed in the attachment manual. Disengage the  
attachment drive when moving the tractor to and from  
work areas.  
should be replaced immediately.  
Never store equipment with gasoline in tank inside a  
building where fumes may reach an open ame or  
spark. Allow engine to cool before storing in any  
enclosure.  
Use a slow speed and engage the shift lever slowly  
when operating on slopes.  
Refer to Storage if unit is to be stored for extended  
Travel across slopes, not up and down. Use extreme  
caution when changing direction on slopes. Do not  
operate on steep slopes.  
periods.  
SPARK ARRESTER  
Look for and keep away from hazards such as  
drop-offs. Stay alert for holes, rocks and other hidden  
hazards in the area of operation.  
This product is equipped with an internal combustion  
engine. DO NOT use on or near any unimproved, forest  
covered or brush covered land unless the exhaust  
system is equipped with a spark arrester meeting  
applicable local, state or federal laws. A spark arrester,  
if used, must be maintained in effective working order  
by the operator.  
After hitting an object, disengage the PTO, turn off and  
remove the ignition key and wait for all motion to stop.  
Check for damage. Repair any damage before  
restarting unit.  
Look behind when operating in reverse. Look for  
people and hazards.  
Operate only from the operators position just behind  
the handlebars.  
If there is a sudden change in the sound or vibration of  
the equipment, disengage the PTO, turn off and  
remove the ignition key, wait for all motion to stop and  
check for damage. Repair any damage or failure before  
restarting unit.  
Never run the engine indoors except to move it outside.  
Exhaust fumes are dangerous.  
Go slowly on slick surfaces. Always be sure of your  
footing, keep a rm grip on the handlebars and walk,  
never run.  
Follow trafc laws when operating on or near a road.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
Position Handlebar  
TOOLS REQUIRED  
1. Disconnect Ignition Harness.  
Phillips Screwdriver, Needle Nose Pliers, Open-End  
Wrench: 3/8, 7/16, 9/16 & 3/4 and or Adjustable  
Wrench  
2. Position the handlebar right side up.  
3. Move the left handle of the handlebar under the  
right side of the frame, across the engine and out  
between the left side of the frame and the PTO  
control.  
REMOVE UNIT FROM CARTON  
Remove the unit and components from the shipping  
container.  
4. Rotate the handlebar into the mounting position.  
5. Reconnect ignition harness.  
Fwd-Rev  
Control  
Rod  
6. Retain the handlebar in position with four 3/8-16 x  
1.25 bolts and locknuts and tighten hardware  
(Figure 2).  
Hi-Lo  
Control Rod  
7. Connect the wiring harness from handlebar to the  
unit.  
8. Mount the Hi-Lo gear control handle assembly  
and pivot to the left handlebar with a 1/2-13 x  
3.50 bolt, locknut, and washer (Figure 3).  
Handlebar  
Assembly  
2
Tractor  
Assembly  
Optional  
3
Brake Handle  
Assembly  
Brake Rod, RH  
6
4
1
5
5
Brake Rod, LH  
DH0040  
DH0010  
1. Hi-Lo Control Handle  
2. Brake Handle Grip  
3. Hi-Lo Control Rod  
4. Extension Rod  
5. Adjust and Jam Nuts  
6. Left Handlebar  
Figure 1  
ASSEMBLY  
Figure 3  
2
3
5
3
4
4
1
DH0020  
1. Ignition Switch  
Harness  
2. Ignition Switch  
3. Instrument Panel  
4. Control Lever  
5. Handlebar (Left)  
Figure 2  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assemble Steering Brakes (Optional)  
Connect Gear Shift and Directional Control  
Rods  
4
1. Fwd/Rev Control  
Handle  
1
2
2. Right Handlebar  
3. Hand Lever Pivot  
4. Fwd/Rev Control  
Rod  
3
4
5
1
5. Adjust and Jam  
Nuts  
2
7
3
8
Figure 5  
6
5
Connect the Fwd/Rev and Hi-Lo gear control rods to  
the tractor and their respective handles using bushings,  
1/4-20 x 1.5 bolts, .281 x .625 x .065 x at washers and  
1/4-20 locknuts. See the gear shift control and  
direction control. (Figure 1) and (Figure 5) Adjust per  
Owner/Operator Manual.  
1. Steering Brake  
Handle  
2. Instruction Plate  
3. Left Hand Brake Rod  
4. Right Hand Brake  
Rod  
5. Rear Hitch  
6. Adjustment Bracket  
7. Bolt and Nut (remove  
rst)  
8. Right Hand Brake  
Assembly  
Install Hubs and Wheels  
For Semi-Pneumatic Wheels: install bushings and  
wheel/hub assemblies onto tractor axles. For all other  
wheels: install hubs to axles and secure wheels to  
hubs with hardware provided.  
Figure 4  
1. Remove nut and bolt from handle brackets.  
(Figure 4)  
Install Attachment(s)  
Left Hand Rod:  
Install each attachment following instructions provided.  
2. Hook the rear of the left hand brake rod into the  
left side of the brake handle weldment. Before  
installing on hitch, place the forward end of the  
left hand brake rod below mufer brace.  
Charge Battery  
See Service Battery in Maintenance.  
Fill Engine Fuel Tank  
Add clean fuel to fuel tank. See Engine Manual for  
correct type and capacity.  
3. Connect the forward end to the pivot plate with a  
.375 x .75 clevis pin, (2) .406 x .812 x .065 at  
washers and a .09 x .75 cotter pin. Insert clevis  
pin with cotter pin to the outside of adjustment  
bracket. (Figure 4)  
Check Engine Oil  
Check and add oil if needed. See Engine Manual for  
specications.  
Right Hand Rod:  
1. Hook the rear of the right hand brake rod into the  
right outside end of the brake handle weldment.  
Check Safety Interlock System  
2. Place the carriage bolt through the brake handle  
WARNING: FAILURE OF INTERLOCK,  
together with improper operation could  
result in death or serious injury.  
3. Put two nylon washers on the bolt between the  
handle and the handlebar weldment  
4. Retain with another nylon washer, rubber washer,  
steel washer and lock nut. (Figure 4)  
Lubricate Pivot Points  
5. Connect the adjustment bracket to the cam lever  
arm with a clevis pin, two .406 x .812 x .065 at  
washers and .09 x .75 cotter pin.  
Put a drop of engine oil on the pivots of the throttle  
lever, the direction control lever, the gear shift lever, the  
PTO control, and range shift handle.  
6. Push brake handle grip onto handle.  
Check Function of all Controls  
7. Connect the interlock plug to the wiring harness.  
8. Fasten the instruction plate and the brake handle  
brackets to the rear hitch with the nut and bolt just  
removed and an additional 1/2-13 bolt and  
locknut.  
WARNING: FAILURE OF CONTROLS  
could result in death or serious injury.  
Ensure unit runs and performs properly.  
9. Adjust brakes per Adjustments.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Throttle Lever  
CONTROLS AND FEATURES  
The throttle lever is used to control the  
engine speed. To increase the engine  
speed, move the lever up to the FAST”  
position. To decrease the engine speed,  
move the lever down to the SLOW”  
position.  
NOTE: Read the attachment(s) and tractor manuals  
before operating the equipment. Operate the tractor  
only from the operators position, behind the  
handlebars. Service the tractor and attachment before  
operating.  
Refer to Controls and Features for the following.  
Direction Control Lever  
F W D  
Choke Control  
The choke control is used to choke a cold  
engine for starting. The choke control is  
The direction control lever controls the  
movement of the tractor. Push the control  
forward to go forward. Pull the control back  
located on the instrument panel. On 8.5HP  
and 13.5HP tractors, push the choke lever  
up to the ONposition to choke the engine. On all  
other tractors, pull the choke control knob out to the  
ONposition to choke the engine.  
to move the tractor backwards.  
N
REV  
PTO Control  
Gear Shift Lever  
The gear shift lever has two operating  
positions. The forward (HIGH) position is  
the fast gear. The rearward (LOW) position  
The PTO control is used to connect or  
disconnect the engine power to an  
attachment. The forward position is OFF;  
the rearward position is ON.  
HIGH  
GEAR  
SHIFT  
is the slow gear.  
STOP  
Ignition Switch  
The ignition switch is used to start  
(electric start models) and stop the  
engine.  
RUN  
The gear shift lever also controls the PTO  
speed. The forward (HIGH) position is the  
fast PTO speed. The rearward (LOW)  
position is the slow PTO speed.  
START  
LOW  
NOTE: The gear shift lever must be in the neutral  
position to engage PTO lever.  
Hourmeter  
The hourmeter shows total time which the ignition  
switch has been in the ONposition.  
NOTE: The gear shift lever must be in the HIGHor  
LOWposition to properly transmit power to the PTO  
or wheels.  
Fuse  
Range Shift Handle  
The range shift handle has two operating  
Electric start models have a fuse to protect the  
electrical system.  
positions. Pull the handle to the rearward  
(LOW) position for the slow speed. Push  
Kick Stand  
H
The kick stand is used to hold the tractor level when  
there is no attachment on the tractor. The kick stand  
must be in the raised position when moving the tractor.  
the handle to the forward (HIGH) position  
for the fast speed.  
L
Rock the tractor back and forth by moving the direction  
control lever back and forth while moving the range  
shift handle helps align the clutch teeth to engage the  
two-speed axle.  
Brake Handlebar  
On tractors with steering brakes, the brake handlebar is  
used to steer the tractor. Swing the brake handlebar left  
for a right turn or right for a left turn.  
WARNING: Never move the range shift  
handle while on a slope or while the  
tractor is moving. Move the handle only  
when the tractor is on level ground and  
stopped (except for rocking to engage the  
clutch as described above).  
Parking Brake  
The parking brake is used to hold the tractor in position  
when not in use.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. If the engine is cold, apply the choke. See Engine  
Manual for detailed instructions.  
FILL FUEL TANK  
5. Set the throttle to the proper starting position.  
After the engine starts, adjust the choke as  
needed.  
WARNING: Use caution with fuel. Fuel is  
very ammable. Keep fuel in a clean and  
tight container. Keep fuel away from re or  
heat. Never put fuel in the fuel tank while  
the engine is running or hot. Clean up any  
spilled fuel before starting the engine.  
6. Pull the starter handle out until compression is  
felt in the engine. Then pull with one swift  
continuous motion. Hold the starter handle to  
allow a slow rewind of the rope.  
Add fuel to the fuel tank as needed. See engine  
manual for the correct type and grade of fuel.  
7. If the engine does not start after six pulls of the  
starter, see Troubleshooting.  
1. Put the unit in an open area.  
Electric Start Engine  
2. Stop the engine and lock the brake.  
1. Move the direction control lever to the NEUTRAL”  
3. Clean the fuel cap and the area around the fuel  
cap to prevent dirt from entering the fuel tank.  
position.  
2. Ensure the PTO control is in the OFFposition  
and the gear shift lever is in the NEUTRAL”  
position.  
4. Remove the cap from the fuel tank.  
5. Fill the fuel tank. Be careful not to spill the fuel.  
6. Install the cap on the fuel tank and tighten.  
3. If the engine is cold, apply the choke. See Engine  
Manual for detailed instructions.  
7. Clean up any spilled fuel before starting the  
engine.  
4. Set the throttle to the proper position. After the  
engine starts, adjust the choke as needed.  
SAFETY INTERLOCK SYSTEM  
One of the operator presence control levers must be  
depressed so the power take off (PTO) or direction  
control lever can be operated.  
5. Put the key in the ignition switch. Turn the key to  
the STARTposition. When the engine starts,  
release the key.  
6. NOTE: Do not operate the starter for more than  
15 seconds. Allow 45 seconds for cooling before  
operating the starter again.  
CAUTION: The operator presence control  
is to protect the operator from the moving  
parts of the attachment and the powered  
moving of the equipment. Operate the  
equipment only when the operator  
7. If the engine does not start after six tries, see  
Troubleshooting.  
Stopping the Engine  
presence control is in working condition.  
1. Move the direction control lever to the NEUTRAL”  
position.  
TO STOP IN AN EMERGENCY  
2. Move the throttle control to the SLOWposition.  
1. Turn the ignition key to "Off".  
3. Move the HI/LO to the NEUTRALposition and  
the PTO control to the OFFposition.  
2. Move the HI/LO to the NEUTRALposition and  
the PTO control to the OFFposition.  
4. Turn the ignition key to the OFFposition.  
Remove the ignition key before leaving the  
tractor.  
3. Wait for all moving parts to stop before leaving  
the operators position.  
TO OPERATE UNIT  
TO START AND SHUT OFF ENGINE  
Before Each Use  
Operating the Transmission  
Learn to operate the tractor in an open area while  
using a slow gear and slow engine speed.  
Check each item in "Before Each Use" in the  
Maintenance Schedule.  
1. Start the engine.  
Manual Start  
2. Move the gear shift lever to the HIGHor LOW”  
1. Move the direction control lever to the NEUTRAL”  
position.  
position.  
3. Move the range shift handle to the HIGHor  
LOWposition.  
2. Ensure the PTO control is in the OFFposition  
and the gear shift lever is in the NEUTRAL”  
position.  
4. Move the throttle lever above the SLOWposition  
(fast enough so that the engine will not stall).  
3. Put the key in the ignition switch and turn it to the  
5. Depress an operator presence handle.  
ONposition.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: One of the operator presence control levers  
must be held down at all times whenever the  
transmission is in gear and/or the PTO lever is in the  
ONposition.  
2. Reduce engine speed.  
3. Travel forward to other work area.  
PARKING  
6. To go forward, move the direction control lever  
forward until the lever stays in the forward  
position. If the lever is not in the full forward  
position, the clutch will slip and cause premature  
clutch wear.  
1. Stop the unit on level ground.  
2. Put the PTO lever in the OFFposition.  
3. Turn off and remove ignition key.  
4. Move the shift control to rst gear position.  
7. To move backward, hold the direction control  
lever to the rear. The lever will return to  
NEUTRALwhen released.  
5. Apply parking brake (if equipped.) Pull up on the  
brake handle until the brake rod is at the top of  
the slot.  
8. To stop the tractor, put the direction control lever  
in the NEUTRALposition. If the PTO is off, you  
can release the operator presence handle.  
TO TRANSPORT UNIT  
1. Move unit onto transport vehicle.  
2. Tie unit down securely. Do not secure by rods,  
linkages or controls that may be damaged.  
USING THE PTO  
To Engage PTO:  
TIPS FOR OPERATION  
1. Start the engine.  
Use slow gears when operating the tractor on rough  
ground, slopes, small areas, near buildings or other  
obstacles.  
2. After the engine is warm, move the throttle lever  
just above the SLOWposition.  
3. Move the gear shift lever to the NEUTRAL”  
Use a slow gear and a fast engine speed when  
operating a snowblower, rotary cultivator, or a mower in  
heavy grass.  
position. Depress an operator presence handle.  
4. Pull the PTO control back to the ONposition  
with one continuous, fast pull.  
Walk behind, never between the handlebars.  
5. Move the throttle lever to the FASTposition.  
6. Move the gear shift lever to the HIGHor LOW”  
position.  
NOTE: The gear shift lever must be in either the HIGH”  
or LOWposition to properly power the attachment.  
7. Operate the direction control lever for desired  
travel.  
To Disengage PTO:  
1. Stop the tractor with the direction control lever.  
2. Move the throttle lever to the SLOWposition.  
3. Move the gear shift to the NEUTRALposition.  
4. Push the PTO control in (forward) to the OFF”  
position.  
Using the Steering Brakes (optional)  
The steering brakes are used when the tractor is being  
driven forward.  
To make a right turn, push the brake handlebar to the  
left.  
To make a left turn, pull the brake handlebar to the  
right.  
CAUTION: Use only the tractor  
handlebars to steer when driving in  
reverse.  
To Travel to Another Work Area  
1. Disengage PTO.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
CHECK FASTENERS  
Check all fasteners after 25 hours of operation to make  
sure that they are tight. Replace any fastener that is  
missing.  
MAINTENANCE SCHEDULE  
25 100 200  
CHECK CLUTCHES  
After 25 hours of operation, check the adjustment of  
the forward-reverse and gear clutches.  
The reverse clutch is adjusted correctly when the  
direction control lever stops 15 degrees past vertical to  
the rear. The lever should return to neutral position  
from reverse.  
Check Engine Oil  
Check Air Cleaner  
*
The forward clutch is adjusted correctly when the  
direction control lever is in the full forward position and  
the large spring has a coil clearance of .010(.254mm).  
Check Engine Cooling  
Lubricate Control  
Linkage  
The Hi-Low Gear clutch is adjusted correctly when the  
gear shift lever is in the HIGHor LOWposition and  
the spring coils are .010(.254mm) apart.  
Check Fasteners  
Check Clutches  
To adjust clutches, see Service and Adjustments.  
Adjust PTO Brake  
Adjust Slip Clutch  
Lubricate Transmission  
Service Battery  
ADJUST PTO BRAKE  
Adjust the PTO brake after every 100 hours of  
operation. See Service and Adjustments.  
ADJUST SLIP CLUTCH  
Adjust the slip clutch after every 100 hours of  
operation. See Service and Adjustments.  
• •  
CHECK ENGINE OIL  
LUBRICATE TRANSMISSION  
Check the engine oil daily, or before each use. Never  
operate the engine when the oil level is below the low  
mark on the dipstick. See the engine manual for oil  
change schedule and detailed instructions.  
After every 100 hours of operation, check the level of  
the lubricant in the transmission. Never operate the  
tractor when the transmission oil level is below the  
LOWmark on the dipstick.  
CHECK AIR CLEANER  
Check the air cleaner daily. See the engine manual for  
detailed instructions.  
1
CHECK ENGINE COOLING  
Check the cooling system every 25 hours. Clean all of  
the grass and other material from the cooling ns and  
intake screen of the engine. If necessary, remove the  
engine shrouds to clean the engine.  
3
LUBRICATE CONTROL LINKAGE  
2
Every 25 hours of operation put a drop of engine oil on  
the pivots of the throttle lever, the direction control  
lever, the gear shift lever, the PTO control, and range  
shift handle.  
1. Oil Filler Plug  
2. Dipstick  
3. Dipstick Tube  
NOTE: There are no grease ttings on the tractor.  
Figure 6  
1. Stop the engine and raise the hood.  
2. Make sure that the tractor is level.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Clean the dipstick tube and the dipstick (Figure  
6).  
Battery Electrolyte First Aid  
Follow First Aid directions for contact with battery uid.  
4. Remove the dipstick, wipe it with a clean cloth or  
towel and put it back in the tube.  
External Contact: Flush with water.  
Eyes: Flush with water for at least 15 minutes and  
get medical attention immediately!  
5. Pull the dipstick out again and look at the oil.  
6. If the oil level is below the low mark on the  
dipstick, add oil.  
Internal Contact: Drink large quantities of water.  
Follow with Milk of Magnesia, beaten egg or  
vegetable oil. Get medical attention immediately!  
7. Clean the area around the ller plug.  
8. Remove the ller plug.  
IMPORTANT: In case of internal contact, DO NOT  
induce vomiting!  
9. Add new, clean lubricant until the dipstick  
indicates that the oil level is correct. See Engine  
Manual.  
The tractor is equipped with a low maintenance battery.  
Check the uid level every 200 hours or at the end of  
the year. Keep the battery clean. If acid is on the  
outside of the battery or the electrical connections are  
corroded, clean the outside of the battery with water  
and baking soda solution. (Figure 7)  
10. Install the ller plug and the dipstick.  
SERVICE BATTERY  
When charging the battery remove it from the unit rst.  
When the battery cables are disconnected, remove the  
negative (-) (ground) cable rst. When replacing the  
battery cable connect the positive (+) cable rst. Any  
time the battery cables are disconnected, clean the  
cable clamps and the battery post or connection.  
WARNING: ELECTRIC SHOCK may  
result in injury and/or damage to unit.  
DO NOT allow objects to come into  
contact with both terminals at the same  
time.  
On tractors not equipped with a maintenance-free  
battery, remove the battery and place on a bench or  
other place which is well ventilated and acid spill will  
not create damage. Fill the battery to the bottom of the  
ll tubes with 1.265 specic gravity electrolyte. Twenty  
minutes after lling with electrolyte, charge the battery  
at 6 to 8 amps for 20 minutes. Follow charger  
REVERSE CONNECTIONS may result in  
sparks which can cause death or serious  
injury. ALWAYS connect positive (+) lead  
of charger to positive (+) terminal, and  
negative (-) to negative (-) terminal.  
ALWAYS connect positive (+) cable  
FIRST, and negative (-) cable SECOND.  
manufacturers instructions for safe procedure. Wait 20  
minutes after charging before replacing the battery vent  
caps and placing on chassis.  
WARNING: EXPLOSIVE GASES from  
battery can cause death or serious injury.  
ALWAYS keep open ames, sparks or  
smoking materials away from batteries.  
2
1
POISONOUS BATTERY FLUID contains  
sulfuric acid. Contact with skin, eyes or  
clothing can cause severe chemical burns.  
ALWAYS wear safety glasses and  
protective gear near battery.  
4
3
2
DO NOT TIP any battery beyond 45˚ angle  
in any direction.  
3
1
4
ALWAYS KEEP BATTERIES OUT OF  
REACH of children.  
WARNING: Battery posts, terminals and  
related accessories contain lead and lead  
compounds, chemicals known to the State  
of California to cause cancer and  
reproductive harm. Wash hands after  
handling.  
OH0170  
OH0240  
1. Fuel Cap  
2. Negative Battery  
Cable  
3. Battery  
4. Positive Battery  
Cable  
Figure 7  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERVICE AND ADJUSTMENTS  
3. Hold the rear nut and jam with the forward nut.  
FORWARD-REVERSE CLUTCH  
To adjust the forward clutch (Figure 8) :  
WARNING: Stop the engine before  
1. Put the direction control in the forward position.  
adjusting the forward-reverse clutch.  
2. Loosen the rear set of jam nuts on the control  
extension rod in the fwd-rev control rod.  
To adjust the reverse clutch (Figure 8) :  
3. Adjust the forward nut until the large spring coils  
1. Loosen the jam nuts on the end of the control  
extension rod in the fwd-rev control rod.  
are .010(.254mm) apart.  
4. Hold the forward nut and jam with the rear nut.  
2. Adjust the rear nut so that the direction control  
lever stops 15 degrees past vertical to the rear.  
5
1
7
4
7
1
2
7
3
8
9
1
7
6
10  
OH0181  
1. Jam Nuts  
5. Large Spring  
6. Brake Rod Assembly  
7. Adjusting Nuts  
9. Adjustment Bracket  
10. Cam Lever Arm  
2. Fwd-Rev Control Rod  
3. Control Extension Rod  
4. Fwd-Rev Neutral Spring  
8. Fwd-Rev Lever Assembly  
Figure 8  
1. Loosen and separate the jam nuts on the end of  
the control extension rod in the Hi-Low control  
rod.  
HI/LOW GEAR CLUTCH  
WARNING: Stop the engine before  
adjusting the gear clutch.  
2. Put the gear shift lever in the LOWposition.  
3. Adjust the nut (rear) near the spring until the  
spring coils are .010(.254mm) apart.  
To adjust the HIGHclutch:  
4. Move the gear shift lever to the NEUTRAL”  
1. Loosen and separate the jam nuts on the rear of  
the control extension rod in the Hi-Low control  
rod.  
position.  
5. Hold the nut adjusted to the spring and jam with  
the other (front) nut.  
2. Put the gear shift lever in the HIGHposition.  
3. Adjust the nut (front) near the spring until the  
spring coils are .010(.254mm) apart.  
4. Move the gear shift lever to the NEUTRAL”  
position.  
5. Hold the nut adjusted to the spring and jam with  
the other (rear) nut (Figure 9).  
To adjust the LOWclutch:  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
1
2
3
7
9
2
2
1
5
1
6
8
4
1. Adjusting Nuts  
2. Jam Nuts  
3. Adjustment Bracket  
4. Pivot Plate  
5. Brake Rod Assembly  
6. Hi-Low Control Rod  
7. Large Spring  
8. Hi-Low Lever Assembly  
9. Control Extension Rod  
Figure 9  
PTO BRAKE  
To adjust the PTO brake:  
2
WARNING: Stop the engine before  
adjusting the PTO brake.  
1
3
1. Remove the attachment and lower the rear of the  
tractor to the ground.  
2. Carefully clean the front of the transmission.  
Remove the quick hitch studs from the  
transmission.  
3. Remove the quick hitch casting and PTO brake  
assembly (Figure 10).  
1. PTO Brake Bolts  
2. Springs  
3. PTO shaft  
2
Figure 11  
1
2
NOTE: Do not tighten the bolts in a circular sequence,  
that is, by tightening the bolt next to one which was just  
tightened. The bolts should be tightened in a cross  
sequence, that is, by tightening one bolt, then  
tightening the bolt which is across from it on the plate.  
Continue tightening the bolts in this sequence until all  
the bolts are tightened.  
2
Make sure the trunnion block is on the shipper shaft  
and held in place by the dog. The dog should rest on  
the spiral teeth of the clutch dog plate. Install the  
gasket.  
2
2. Quick Hitch Stud  
1. Quick Hitch Adapter  
Figure 10  
Align the splines on the quick hitch shaft with those in  
the dog. Slide the quick hitch casting and PTO brake  
assembly back into the place on the front of the  
transmission. Install the quick hitch studs and tighten.  
NOTE: The attachment gasket must be replaced if  
damaged.  
4. Tighten all PTO brake bolts until the springs are  
solid. Back all bolts up 1/2 turn (Figure 11).  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: Do not tighten the bolts in a circular sequence,  
that is, by tightening the bolt next to one which was just  
tightened. The bolts should be tightened in a cross  
sequence, that is, by tightening one bolt, then  
tightening the bolt which is across from it on the plate.  
Continue tightening the bolts in this sequence until all  
the bolts are tightened. (Figure 12)  
SLIP CLUTCH  
To adjust the slip clutch:  
WARNING: Stop the engine before  
adjusting the slip clutch.  
1. Remove the attachment and lower the rear of the  
tractor to the ground.  
13. Slide the clutch assembly back onto the pinion  
shaft.  
2. Carefully clean the front of the transmission.  
14. Install the retaining ring and slide the pinion shaft  
completely into the transmission.  
3. Remove the quick hitch studs from the  
transmission.  
15. Reinstall the shipper shaft and other parts that  
were removed. Make sure the trunnion block is on  
the shipper shaft and held in place by the dog.  
The dog should rest on the spiral teeth of the  
clutch dog plate.  
4. Remove the quick hitch PTO assembly and PTO  
brake assembly.  
NOTE: The attachment gasket must be replaced if  
damaged.  
16. Install the gasket.  
5. Remove the dog and trunnion block.  
17. Align the splines on the quick hitch shaft with  
those in the dog.  
6. Disconnect the wiring harness from the PTO  
brake interlock switch.  
18. Slide the quick hitch casting and PTO brake  
assembly back into place on the front of the  
transmission.  
7. Remove the shifter parts.  
8. Slide the shipper shaft assembly through the top  
of the advance casting.  
19. Install the quick hitch studs and tighten.  
9. Slide the clutch assembly and pinion shaft out of  
the transmission.  
STEERING BRAKE ADJUSTMENT  
(OPTIONAL):  
10. Remove the retaining ring and slide the clutch  
assembly off of the pinion shaft.  
1. Park the tractor in a level area.  
11. Turn all of the jam nuts counterclockwise to  
loosen.  
2. Put the parking brake handle in the OFF(down)  
position.  
12. Torque bolts to 70 in. lbs. in two stages. First  
tighten bolts to 20 in. lbs. in pattern shown  
(Figure 12). Then tighten to 70 in. lbs. in same  
pattern.  
3. Loosen the jam nuts on the right and left brake  
rod assemblies (Figure 8)(Figure 9).  
4. Turn the adjusting nuts until the brake handle  
cross bar is parallel with the instrument panel.  
(See Controls and Features.)  
5. Move the brake handlebar all the way to the right  
and measure the distance from the right end  
edge of the brake handle cross bar to the right  
side of the instrument panel.  
6
6. Move the brake handlebar all the way to the left  
and make the same measurement on the left.  
1
4
7. Adjust the nuts until the difference between the  
two measurements is 1/2to 3/4(13 to 19mm).  
8. Turn both adjusting nuts the same amount,  
clockwise to increase the measurement  
difference or counterclockwise to decrease the  
measurement difference.  
3
2
5
9. Tighten the jam nuts.  
10. Loosen the jam nuts below the compression  
spring on the right side of the tractor and adjust  
until one has the desired tension for the right  
brake.  
Figure 12  
11. Tighten the jam nuts.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STORAGE  
Check each item in "Before Storage" in the  
Maintenance Schedule. See Engine Manual for  
detailed instructions on preparing the engine for  
storage.  
NOTE: Do not use harsh or abrasive cleaners on any  
painted surface. Do not allow gasoline or oil to remain  
on any surface.  
3. Refer to the engine manual and prepare the  
engine for storage.  
When The Tractor Will Not Be Operated For  
Two Months Or More:  
4. Charge the battery initially and then every three  
weeks.  
1. Do the daily and 25-hour maintenance, but do not  
add gasoline.  
To Put The Tractor Into Service:  
2. Clean the tractor. Paint or oil bare metal surfaces  
to prevent rust.  
1. Refer to the engine service manual and prepare  
the engine for service.  
IMPORTANT: NEVER spray unit with water or store  
unit outdoors. Water can seep into sealed bearings,  
which are sealed against dirt and debris only, causing  
reduced component life.  
2. Charge the battery.  
3. Put fresh, clean gasoline in the fuel tank.  
TROUBLESHOOTING  
PROBLEM  
PROBABLE CAUSE  
CORRECTION  
1. Fwd-Rev lever in FORWARD”  
1. Place Fwd-Rev lever in neutral position.  
2. Disengage PTO.  
Starter will  
not operate  
when ignition  
key is turned  
to S”  
position  
2. PTO engaged  
3. Clean and tighten battery connections.  
4. Replace fuse.  
3. Loose battery cable(s)  
4. Blown fuse  
5. Charge battery.  
position.  
5. Discharged battery  
6. Defective solenoid switch  
7. Defective starter  
6. Replace. Call your dealer.  
7. Replace starter. Call your dealer.  
1. Discharged battery  
2. Loose battery cable  
3. Defective starter  
1. Charge the battery. See Maintenance.  
2. Clean and tighten battery connections.  
3. Replace starter. Call your dealer.  
Solenoid  
switch clicks  
but starter will  
not operate  
when ignition  
is turned to  
Sposition.  
1. Fuel tank empty  
1. Fill tank with clean, fresh fuel.  
2. Turn fuel shut-off valve on.  
3. Replace relay. Call your dealer.  
4. See Engine Manual  
Enginestarter  
operates but  
engine will  
not start  
when ignition  
switch is  
2. Fuel shut-off valve at the fuel tank  
turned off  
3. Relay defective  
4. Engine failure  
turned to S”  
position.  
1. Engine choke in ONposition  
2. Restricted air cleaner element  
3. Restricted fuel cap vent  
1. Move engine choke to "OFF".  
2. Clean air cleaner. See engine manual.  
3. Clear obstruction from fuel cap vent.  
4. See Engine Manual  
Engine starts  
but runs  
roughly.  
4. Engine carburetor malfunction  
5. Engine electrical system trouble  
5. See Engine Manual  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROBLEM  
PROBABLE CAUSE  
CORRECTION  
1. Operator presence handle not  
pressed  
1. Press and hold at least one operator  
presence control.  
Engine stops  
when PTO or  
Fwd-Rev is  
engaged.  
2. Operator presence handle out of  
adjustment  
2. Call your dealer.  
3. Replace switch. Call your dealer.  
3. Faulty switch  
1. Gear shift lever in NEUTRAL”  
1. Place gear shift lever in Hi or Low position.  
The tractor  
will not move  
when the  
position  
2. Place range shift lever in Hi or Low  
position.  
2. Range shift handle in NEUTRAL”  
direction  
position  
3. Adjust Fwd-Rev clutch. See Adjustments  
control lever  
is moved to  
FORWARD”  
or  
3. Fwd-Rev clutch needs adjustment  
4. Internal transmission damage  
or call your dealer.  
4. Call your dealer.  
REVERSE.  
1. Gear shift lever in NEUTRAL”  
1. Place gear shift lever in Hi or Low position.  
Attachment  
will not  
operate.  
position  
2. Clear debris from attachment. Repair  
before restarting engine.  
2. Attachment jammed or damaged  
3. Attachment slip clutch out of  
adjustment or damaged  
3. Adjust or repair.  
4. Adjust or repair.  
4. Shipper shaft and clutch dog loose  
and out of adjustment  
1. Hi/Low clutch worn  
1. Adjust or repair.  
2. Adjust or repair.  
3. Repair  
Attachment  
operates  
slowly  
2. Attachment slip clutch needs  
adjustment or repair  
3. Attachment damaged  
4. Engine problems  
4. See Engine Manual  
1. Debris blocking the linkage  
1. Clear debris from linkage. Repair before  
restarting engine.  
Transmission  
will not go  
into HIGH”  
range. Jumps  
out of range  
2. Rust on the clutch sliding pin  
3. Shifting clutch dogs worn/damaged  
2. Clean or replace.  
3. Adjust or replace.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES  
ACCESSORIES  
See your authorized Gravely dealer to add these  
optional accessories.  
78506400 Tractor Cover  
78506500 Retro-Fit Kit  
78506600 High Lift Blade Kit, 40Mowers  
78506700 High Lift Blade Kit, 50Mowers  
78506800 Sand Blade Kit, 40Mowers  
78506900 Sand Blade Kit, 50Mowers  
78802700 Handle Interlock Kit  
Mowing  
78500600 30Mower Drive (Short)  
78500700 30Mower Drive (Long)  
78500800 40Commercial Mower Drive Prior to  
5000 Series  
78500900 40Commercial Mower Drive On 5000  
Series & Newer Models  
ATTACHMENTS  
See your authorized Gravely dealer to add these  
optional attachments.  
78501000 42Sickle Mower Cutter Bar  
78501100 Chain Guard  
885001  
885002  
885003  
885004  
785009  
885007  
885008  
885009  
885010  
885011  
833007  
885014  
885015  
885013  
885016  
885017  
30Mower Deck  
30Mower Deck  
40Mower Deck  
40Commercial Mower Deck  
Drive not included  
50Mower Deck  
32Flail Mower  
42Sickle Mower  
Rotary Plow  
78501200 Front Mount Kit  
78501300 Front Anti-Scalp Roller  
78501400 Rear Anti-Scalp Roller  
78501500 30Weight Kit  
Garden  
78501600 Rotary Cultivator Drive  
78501700 Planter Drill (Less Blades)  
78505900 10Planter Drill Blade  
78506000 19Planter Drill Blade  
Snow Removal  
Cultivator  
32Sno Thro  
48Dozer Blade  
44Brush  
73500700 Snowblower Drift Bar  
78501900 48Snow Dozer Hitch  
78502000 48Snow Dozer Counterweight Kit  
78502100 48Snow Dozer Skid Kit  
78502200 Power Brush Conversion Kit  
78502300 44Power Brush Completing Kit  
78502400 Tire Chains (4:00 x 8) (Pair)  
78502500 Tire Chains (7:50 x 8) (Pair)  
78502600 Tire Chains (8:50 x 8) (Pair)  
Miscellaneous  
Winter Cab  
Cart  
Sulky  
78502700 Pow-R-Steering Kit  
78502900 Quick Hitch Pin Kit  
78503000 Attachment Adapter Kit  
78503100 Dual Wheel Spacers  
78509800 Dual Wheel Spacers  
78503200 Trailing Hitch Kit  
78510600 Coupler Strut Weldment Kit  
78503400 Remote Air Cleaner Kit  
78503500 High Performance Air Cleaner Kit  
78503600 QS Mufer Kit  
78506100 Triple Purpose Wrench  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERVICE PARTS  
Be sure to always use genuine Gravely parts to keep  
your Sno-Thro running like new.  
Part no.  
Qty  
1
Description  
03621100  
04202200  
21527200  
21527300  
Battery (Robin Model)  
Battery (Briggs Model)  
Air Cleaner (Robin EH25)  
1
1
1
Assembly-Air Cleaner  
Element (Robin EH41)  
21527100  
1
Air-Cleaner Element (Robin  
EH25)  
08811700  
21526800  
21526900  
08861651  
03498451  
08526151  
07226600  
07226700  
1
1
1
3
3
1
1
1
Fuel-Filter (Robin)  
Spark Plug (Robin EH25)  
Spark Plug (Robin EH41)  
Blade-50”  
Blade-40”  
Blade-30”  
Belt-50Mower drive  
Belt-40Mower drive  
SPECIFICATIONS  
Model Number  
Height - in (cm)  
Length - in (cm)  
Width - in (cm)  
Weight - lbs (Kg)  
985114  
985115  
36.5 (92.7)  
985117  
58 (147.3)  
25 (63.5)  
425 (192.8)  
420 (183)  
428 (195)  
Wheel Size - in (cm)  
4.0 x 8 (10.2 x 20.3) Stud Tread  
4.0 x 8 (10.2 x 20.3) Trac Tread  
18 x 8.5-8 (45.7 x 21.6-20.3) Turf Chief  
18 x 8.5-8 (45.7 x 21.6-20.3) Turf Saver  
16 x 5 x 3 (40.6 x 12.7x 7.2) Semi-Pneumatic Ground Grip  
See Tire Sidewall  
Tire Pressure  
Steering Brakes  
Engine  
7 x 1.75 Drum Type  
N/A  
7 x 1.75 Drum Type  
16 HP Briggs & Stratton  
16HP  
8.5 HP Robin  
EH25  
13.5 HP Robin  
EH41  
Engine Operating Fast Idle Speed - RPM  
Fuel  
3300-1600  
See Engine Manual for type and grade  
Fuel Tank Capacity - gal (Liters)  
Transmission Oil Capacity - qt (Liters)  
Transmission Oil Type  
1.5 (5.68)  
5.0 (4.73)  
SAE 30  
Engine Oil Type and Capacity  
Battery  
See Engine Manual  
12V BCI Group 22F,  
42amp/Hr  
12V BCI Group, 230 CCA. 29 min. Reverse Capacity  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY  
2Year Limited Warranty  
Ariens Company hereby warrants to the original consumer purchaser  
that all Gravely Two-Wheel, Professional G, Pro, and ProMaster products  
will be free from defects in material and workmanship for a period of  
two (2) years from the date of purchase or 1000 hours, whichever  
comes first.  
Gravely Division of Ariens Company  
655 West Ryan Street  
P.O. Box 157  
Brillion, WI 54110-0157  
920-756-2141  
Protection Plan  
Ariens Company will repair or replace any part found upon examination  
by the Ariens Company to be defective. Such repair or replacement  
will be free of charge to the purchaser (labor and parts), except as  
noted below.  
Fax 920-756-2407  
This warranty is subject to the following exceptions, conditions, and limitations:  
Usage Requirement  
The duration of this warranty shall be ninety days or 1000 hours, whichever comes first, if the product is rented or leased.  
Purchasers Responsibilities  
Exclusions (No Warranty)  
The purchaser must perform maintenance & minor adjustments  
per the operators manual.  
The purchaser must notify Ariens Company or an authorized  
Gravely service representative of the need for warranty service.  
The purchaser must transport the product to and from the place  
of warranty repair.  
Normal maintenance, services, and normal replacement items,  
such as spark plugs, oil, oil filters, air filters, mufflers, belts,  
tires, shoes, runners, scraper blades, shear bolts, mower blades,  
mower vanes, headlights, light bulbs, knives, etc. are not covered  
by this warranty.  
Any equipment which has been altered, misused, misassembled,  
improperly adjusted, neglected, or damaged by accident is not  
covered by this warranty.  
Service completed by someone other than an authorized  
Gravely dealer is not covered by this warranty.  
Any attachment not approved by Gravely nor any parts that  
are not genuine Gravely service parts are not covered by this  
warranty.  
Engines and engine accessories are covered only by the  
warranty made by the engine manufacturer, and are not covered  
by this warranty.  
Product Registration  
The Gravely dealer must fill out and return the warranty  
registration card to validate the warranty.  
Service Parts and Accessories  
Service parts and accessories not purchased with the product  
covered by this warranty are warranted to be free of defects  
for a period of ninety (90) days following the date of purchase,  
and will be replaced free of charge (except for labor).  
This warranty applies only to products purchased in the United  
States (including Puerto Rico) and Canada. In all other countries,  
contact place of purchase.  
Service  
Warranty service must be done by an authorized Gravely dealer.  
To find a Gravely dealer near you, contact Ariens Company.  
Battery Warranty Prorated  
One to three months - Free replacement  
Four to twelve months - Prorated over 12 months  
Ariens Company may from time to time change the design of its products. Nothing contained in this warranty shall be construed as  
obligating Ariens Company to incorporate such design changes into previously manufactured products, nor shall such changes be  
construed as an admission that previous designs were defective.  
LIMITATION OF REMEDY AND DAMAGES  
Ariens Companys liability under this express warranty, and under  
Ariens Company makes no warranty other than  
any implied warranty that may exist, is limited to repair or replacement  
DISCLAIMER OF FURTHER WARRANTY  
what is expressly made in this warranty. If the law  
of any defective part. In no event shall Ariens Company be liable  
of your state provides that an implied warranty of  
merchantability, or an implied warranty of fitness  
for a particular purpose, applies to Ariens Company,  
any such implied warranty is limited to the duration  
of this express warranty.  
for incidental, special, or consequential damages (including lost  
profits). This warranty gives you specific legal rights. You may also  
have other rights which vary from state to state. Some states do  
not allow the exclusion of incidental or consequential damages, or  
limitations on how long an implied warranty lasts, so the above  
limitations and exclusions may not apply to you.  
Form: GLW2-062399  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GRAVELY  
A Division of Ariens Company  
655 West Ryan Street  
P.O. Box 157  
Brillion, WI 54110-0157  
920-756-2141  
Fax 920-756-2407  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Lawn Mower Accessory 48624599 User Guide
Jonsered Lawn Mower LT2220 CMA2 User Guide
Land Pride Lawn Mower DRG04 User Guide
McCulloch Lawn Mower 165H107RB BA165H107RBC User Guide
Poulan Lawn Mower 179075 User Guide
Schulte Lawn Mower XH1500 Series User Guide
Sears Lawn Mower 143 User Guide
Sears Lawn Mower 91725752 User Guide
Snapper Lawn Mower EMRP216014B User Manual
Stiga Lawn Mower 8211 3013 10 User Guide