Columbia 159cc Lawn Mower Manual User Manual

INSTRUCTION MANUAL  
21" 3-in-1 Self Propelled Lawn Mower  
Model # DB8621S  
Have product questions or need technical support? Please feel free to contact us!  
Toll free: 1-800-791-9458 Mon-Fri 9-5 EST  
CONTENTS  
Technical data…...………………………………………………………... 3  
Introduction………………………………………………………………. 4  
Safety information…….………………………………………………...  
General safety procedures ……....………………………………………  
Important safety instructions…………………………………………….  
4
5
6
Knowing your lawn mower……………………………………………… 8  
Lawn mower preparation………………………………………………...  
9
Operation……………………....………………………………………… 12  
Maintenance……………………………………………………………... 15  
Storage……………………………………………………………………. 16  
Troubleshooting…………………………………………………………. 17  
Exploded view & parts list……………………………………………… 18  
Warranty………………………………………………………………… 20  
TECHNICAL DATA  
21" 3-in-1 Self Propelled Lawn Mower  
Model # DB8621S  
Engine type:  
4 stroke, OHV, single cylinder with forced air cooling system  
Displacement:  
159 cc  
Fuel tank capacity:  
Oil capacity:  
0.26 Gallon  
17 fl.oz  
Cutting width:  
21 inch  
Cutting height:  
1.18 – 3 inch  
5 Position  
Height adjustment:  
Drive type:  
Rear- wheel drive  
1.4 Bushels  
Grass catcher capacity:  
Wheel:  
Front: 7 inch / Rear: 8 inch  
33.3 x 22.6 x 17.3 inches  
90.4 lb  
Package dimensions (L x W x H):  
Weight:  
3
INTRODUCTION  
Thank You for Purchasing a PowerSmart® Product. This manual provides information regarding the safe  
operation and maintenance of this product. Every effort has been made to ensure the accuracy of the  
information in this manual. PowerSmart® reserves the right to change this product and specifications at  
any time without prior notice.  
Please keep this manual available to all users during the entire life of the lawn mower.  
This manual contains special messages to bring attention to potential safety concerns, lawn  
mower damage as well as helpful operating and servicing information. Please read all the  
information carefully to avoid injury and machine damage.  
QUESTIONS? PROBLEMS?  
Please contact our Customer Service Dept. with any questions and/or comments, either by Email:  
[email protected], or Toll Free at (800) 791-9458. We are available Mon-Fri 9am-5pm EST to  
help solve any issues that you might encounter.  
NOTICE REGARDING EMISSIONS  
Engines that are certified to comply with U.S. EPA emission regulations for SORE (Small Off Road  
Equipment), are certified to operate on regular unleaded gasoline, and may include the following  
emission control systems: (EM) Engine Modifications and (TWC) Three-Way Catalyst (if so equipped).  
SAFETY INFORMATION  
Before operating this lawn mower, read and observe all warnings, cautions, and instructions on the lawn  
mower and in this Owner’s Manual.  
NOTE: The following safety information is not meant to cover all possible conditions and situations that  
may occur. Read the entire Owner’s Manual for safety and operating instructions. Failure to follow  
instructions and safety information could result in serious injury or death.  
This safety alert symbol is used to identify safety information about hazards that can result in personal  
injury.  
A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to  
indicate the likelihood and the potential severity of injury. In addition, a hazard symbol may  
be used to represent the type of hazard.  
DANGER indicates a hazard, which, if not avoided, will result in death or serious injury.  
WARNING indicates a hazard, which, if not avoided, could result in death or serious injury.  
CAUTION indicates a hazard, which, if not avoided, might result in minor or moderate injury.  
CAUTION when used without the alert symbol, indicates a situation that could result in damage to the  
engine.  
4
GENERAL SAFETY PROCEDURES  
For any questions regarding the hazard and safety notices listed in this manual or on the product, please  
call (800) 791-9458 Mon-Fri 9-5 EST before using the engine.  
DANGER: CARBON MONOXIDE  
Using an engine indoors CAN KILL YOU IN MINUTES. Engine exhaust contains carbon  
monoxide (CO). This is a poison gas you cannot see or smell. If you can smell the engine exhaust, you are  
breathing CO. But even if you cannot smell the exhaust, you could be breathing CO.  
NEVER use an engine inside homes, garages, crawlspaces, or other partly enclosed areas. Deadly levels  
of carbon monoxide can build up in these areas. Using a fan, or opening windows and/or doors will NOT  
properly vent CO nor supply adequate fresh air. ONLY use an engine outside and far away from  
windows, doors, and vents. These openings can pull in engine exhaust.  
Even if you use an engine correctly, CO may leak into the home. ALWAYS use a battery-powered or  
battery-backup CO alarm in the home. If you start to feel sick, dizzy, or weak after the engine has been  
running, move to fresh air RIGHT AWAY. See a doctor. You may have carbon monoxide poisoning.  
WARNING: The exhaust from this product contains chemicals known to the State of California to cause  
cancer, birth defects, or other reproductive harm.  
WARNING: This engine may emit highly flammable and explosive gasoline vapors, which can cause  
severe burns or even death if ignited. A nearby open flame can lead to explosion even if it isn’t directly in  
contact with gasoline.  
Do not operate near an open flame.  
Do not smoke near the engine.  
Always operate on a firm, level surface.  
Always turn engine off before refueling. Allow engine to cool for at least 2 minutes before  
removing fuel cap. Loosen cap slowly to relieve pressure in tank.  
Do not overfill fuel tank. Gasoline may expand during operation. Do not fill to the top of the tank.  
Allow for expansion.  
Always check for spilled fuel before operating.  
Empty fuel tank before storing or transporting the engine.  
WARNING: This engine produces heat when running. Temperatures near exhaust can exceed 1500F  
(650 C).  
Do not touch hot surfaces. Pay attention to warning labels on the engine identifying hot parts of the  
machine.  
Allow engine to cool down after use before touching engine or areas of the engine that become hot during  
use.  
CAUTION: Misuse of this engine can damage it or shorten its life.  
Only use engine for its intended purposes.  
5
IMPORTANT SAFETY INSTRUCTIONS  
General Operation  
Read, understand, and follow all instructions on the machine and in the manual(s) before starting.  
1. Do not put hands or feet near or under the machine. Keep clear of the discharge opening at all times.  
2. Only allow responsible adults, who are familiar with the instructions, to operate this machine.  
3. Clear the area of objects such as rocks, wire, toys, etc., which could be thrown by the blade. Stay  
behind the handle when the engine is running.  
4. Be sure the area is clear of bystanders before operating. Stop machine if anyone enters the area.  
5. Do not operate machine barefooted or while wearing sandals. Always wear substantial footwear.  
6. Do not pull machine backward unless absolutely necessary. Always look down and behind before and  
while moving backward.  
7. Never direct discharged material toward anyone. Avoid discharging material against a wall or  
obstruction. Material may ricochet back toward the operator. Stop the blade when crossing gravel  
surfaces.  
8. Do not operate machine without the entire grass catcher, discharge guard, rear guard, or other safety  
protective devices in place and working.  
9. Never leave a running machine unattended.  
10. Stop the engine and wait until the blade comes to a complete stop before cleaning the machine,  
removing grass catcher, or unclogging the discharge guard.  
11. Operate machine only in daylight or good artificial light.  
12. Do not operate machine while under the influence of alcohol or drugs.  
13. Never operate mower in wet grass. Always be sure of your footing; walk; never run.  
14. Disengage the drive system, if so equipped, before starting the engine.  
15. If the machine should start to vibrate abnormally, stop the engine and check for the cause  
immediately. Vibration is generally a warning of trouble.  
16. Always wear eye protection when operating machine.  
17. See manufacturer's instructions for proper operation and installation of accessories. Only use  
accessories approved by the manufacturer.  
Slope Operation  
Slopes are a major factor related to slip and fall accidents, which can result in severe injury. Operation on  
all slopes require extra caution. If you feel uneasy on a slope, do not mow it.  
1. Mow across the face of slopes; never up and down. Exercise extreme caution when changing  
direction on slopes.  
2. Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could cause a slip and  
fall accident. Tall grass can hide obstacles.  
3. Do not mow on wet grass or excessively steep slopes. Poor footing could cause a slip and fall  
accident.  
4. Do not mow near drop-offs, ditches, or embankments. You could lose your footing or balance.  
Children  
Sever injury can occur if the operator is not alert to the presence of children in the immediate area.  
Children are often attracted to the mowing activity. Never assume that children will remain where you  
last saw them.  
1. Keep children out of the mowing area and under the watchful care of a responsible adult other than  
the operator.  
2. Be alert and turn mower off if a child enters the area.  
3. Never allow children under the age of 16 to operate the lawn mower.  
6
4. Use extra care when approaching blind corners, shrubs, trees, or other objects that may block your  
view of a child.  
Service  
1. Safe Handling of Gasoline  
2. To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is  
extremely flammable and the vapors are explosive.  
3. Extinguish all cigarettes, cigars, pipes, and other sources of ignition.  
4. Only use a US EPA approved compliant portable fuel container.  
5. Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling.  
6. Never attempt to refuel the lawn mower while indoors.  
7. Never store the machine or fuel container where there is an open flame, spark, or pilot light such  
as on a water heater or on other appliances.  
8. Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place  
containers on the ground away from your vehicle before filling.  
9. Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not  
possible, then refuel such equipment with a portable container, rather than from a gasoline  
dispenser nozzle.  
10. Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until  
fueling is complete. Do not use a nozzle lock-open device.  
11. If fuel is spilled on clothing, change clothing immediately.  
12. Never overfill fuel tank. Replace gas cap and tighten securely.  
General Service  
1. Never operate machine in a closed area.  
2. Keep all nuts and bolts tight to be sure the equipment is in safe working condition.  
3. Never tamper with safety devices. Check their proper operation regularly.  
4. Keep machine free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and  
remove any fuel-soaked debris. Allow machine to cool before storing  
5. If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before starting.  
6. Never make any adjustments or repairs with the engine running. Disconnect the spark plug wire  
to prevent unintended starting.  
7. Check grass catcher components and the discharge guard frequently and replace with  
manufacturer's recommended parts, when necessary.  
8. Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing  
them.  
9. Do not change the engine governor setting or overspeed the engine.  
10. Maintain or replace safety and instruction labels, as necessary.  
7
KNOWING YOUR LAWN MOWER  
Please use the illustration below to familiarize yourself with the location and function of the components  
that control of your lawn mower.  
15  
14  
13  
12  
11  
10  
1
2
9
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Recoil Starter handle  
Grass catcher  
Cutting height adjustment lever  
Rear wheel  
Side discharge cover  
Oil dipstick  
Front wheel  
9
Air Filter  
Fuel tank cap  
Rear discharge door  
Lower handle  
Upper handle  
Engine start/stop lever  
Drive control bar  
10  
11  
12  
13  
14  
15  
Cutting height adjustment lever  
8
LAWN MOWER PREPARATION  
The following section describes steps necessary to prepare the lawn mower for use. If after reading this  
section, you are unsure about how to perform any of the steps please call (800) 791-9458 Mon-Fri 9-5  
EST for customer service. Failure to perform these steps properly can damage the lawn mower or shorten  
its lifespan.  
UNPACKING  
Unpack the lawn mower and all its parts, and compare against the list below. Do not discard the carton or  
any packaging until the engine is completely assembled.  
1
2
3
4
5
6
7
8
9
10  
1
Side discharge chute  
Grass Catcher  
Lawn mower with upper handle  
Lower handle  
6
7
8
9
Washer (2)  
Screw M8 (2)  
Flange bolts M6 (2)  
Cable clip  
Spark plug wrench  
2
3
4
5
Knob (2)  
10  
9
ATTACH LOWER & UPPER HANDLE  
1. Take lower handle and line up the hole in the lower handle with the  
hole on the handle bracket.  
2. Secure the lower handle with Sleeve with provided M6 Hexagonal  
flange bolts on each side.  
M6 flange bolts  
3. Pull upper handle up and lock it in position with boltswasher and  
knob on both side.  
Knobwasher and screw  
4. Insert the recoil starter handle cable into the hook provided on the  
upper handle.  
Recoil starter handle  
10  
GRASS CATCHER  
Attach grass catcher  
1. Lift mower rear discharge door.  
2. Place grass catcher into the slots in the handle brackets.  
3. Release the rear discharge door so that it rests on the grass catcher.  
Remove grass catcher  
1. Lift mower rear discharge door.  
2. Lift grass catcher up and off the slots in the handle bracket.  
3. Release mower rear discharge door to allow it to close rear opening of mower.  
SIDE DISCHARGE CHUTE  
To convert mower for side discharge, the grass catcher has been  
removed and that the rear discharge door is closed.  
1. Lift the spring-loaded discharge cover located on the side of the  
mower.  
2. Slide two hooks of the side discharge chute under the hinge pin  
and lower the spring on the side discharge cover.  
Caution: Do not attempt to remove the permanently mounted spring  
loaded side discharge cover at any time.  
11  
ADJUSTING THE CUTTING HEIGHT  
Warning! Cutting height adjustments should only be performed after the engine and blades  
have come to a complete stop!  
It is always best to begin cutting your lawn with a higher deck height to prevent scalping your lawn.  
The cutting height is adjusted with a single lever.  
Actuate the adjustment lever and pull it to the required position. Please make sure that the lever locks into  
position.  
Cutting height adjustment lever  
OPERATION  
GAS AND OIL FILL-UP  
The engine comes shipped without oil or gasoline. Be sure to add oil and gasoline before starting the  
engine.  
Refer to the separate engine operator’s manual for additional engine information.  
1. Add oil before starting mower for the first time.  
2. Service the engine with gasoline as instructed in the separate engine operator’s manual.  
Warning: Use extreme care when handling gasoline. Gasoline is extremely flammable and  
its vapors are explosive. Never fuel the machine indoors or while the engine is hot or running.  
Extinguish all cigarettes, cigars, pipes and other potential sources of ignition.  
12  
ENGINE START/STOP LEVER  
This lawn mower comes equipped with an engine start/stop lever to  
prevent unintentional starting and to ensure safe operation. Releasing this  
lever will quickly stop the blade in case of danger. The lever must be  
actuated before the lawn mower is started. When the engine start/stop  
lever is released, it must return to its initial position.  
Engine start/stop lever  
Before you start mowing, you should run through this process several  
times in order to ensure that the lever and actuator cables are working  
properly. Repeat the test several times after the engine has started up.  
When the engine start/stop lever is released, the engine must stop within a  
few seconds. If not, contact Customer Service.  
Warning: The blade begins to rotate as soon as the engine is started.  
START THE ENGINE  
1. Ensure that the ignition cable is connected to the spark plug.  
2. Stand behind the lawn mower. Actuate the engine start/stop lever with one hand. The other hand must  
be on the starter handle.  
3. Start the engine using the starter handle. To do this pull out the handle approx. 4 –6 inches (until you  
feel a resistance) and then start the engine with a sharp tug. If the engine does not start, tug the handle  
again.  
Caution: Never allow the actuator cable to snap back.  
Caution: In cold weather, it may be necessary to repeat the starting process several times.  
STOP THE ENGINE  
Release the engine start/stop lever to stop the engine.  
DRIVE CONTROL BAR  
Drive control bar  
If you press drive control bar the clutch for the drive will be closed and the  
lawnmower will start to move with the engine running. Release the drive  
control bar in good time to stop the moving lawnmower.  
Practice starting and stopping before you use the mower for the first time  
until you are familiar with controlling the mower.  
MOWING  
The engine throttle on your mower has been preset to provide optimum bagging and mulching  
performance for years to come.  
Only use a sharp blade that is in good condition. This will prevent the grass blades from becoming frayed  
and the lawn from turning yellow.  
Mow in straight lines for a nice, clean look. The swaths should overlap each other by a few inches in  
order to avoid stripes.  
It’s import to keep the underside of the mower deck clean and remove grass build-up. This buildup will  
decrease mulching quality, and make it harder for the equipment to bag the grass.  
13  
Always mow along inclines (not up and down). You can prevent the lawn mower from slipping down by  
holding a position at an angle upwards. Select the cutting height according to the length of the grass. If  
necessary, mow a number of times so that you never cut more than 2 inches of grass in one go.  
Turn off the engine before doing any checks on the blade. Keep in mind that the blade continues to rotate  
for a few seconds after the engine has been turned off. Never attempt to manually stop the blade.  
Regularly check to see if the blade is securely attached, is in good condition and is sharp. If the contrary  
is the case, sharpen the blade or replace it. In the event that the blade strikes an object, immediately turn  
off the lawn mower and wait for the blade to come to a complete stop. Then inspect the condition of the  
blade and the blade mount. Replace any parts that are damaged.  
USING AS SIDE DISCHARGE  
You should fit the mulching adapter in order to use the side discharge.  
1. On the side of the mower, lift the side discharge cover.  
2. Slide two hooks of side discharge chute under hinge pin on the side  
discharge cover. Lower the side discharge cover.  
Caution: Do not remove side discharge cover at any time.  
USING AS A REAR BAGGER  
To use the grass catcher to collect clippings while you are operating the mower.  
1. Attached grass catcher following instruction in the lawn mower preparation. Grass clippings will  
automatically collect in bag as you run the mower. Operate mower until grass catcher is full.  
2. Stop engine completely by releasing the engine start/stop lever. Make sure that the engine has come  
to a complete stop.  
3. Lift rear discharge door and pull grass catcher up and away from the mower to remove the grass  
catcher. Dispose of the grass clippings and reinstall the grass catcher when complete.  
Warning: If you strike a foreign object, stop the engine. Remove spark plug wire,  
thoroughly inspect mower for any damage, and repair damage before restarting and  
operating. Excessive vibration of the mower during operation is an indication of damage.  
The mower should be promptly inspected and repaired.  
14  
MAINTENANCE  
Proper routine maintenance of this mower will help prolong the life of the machine.  
Always observe safety rules when performing any maintenance.  
The warranty on this lawn mower does not cover items that have been subjected to operator abuse or  
negligence. To receive full valve from warranty, operator must maintain the lawn mower as instructed  
here.  
Changing of engine-governed speed will void engine warranty.  
All adjustments should be checked at least once each season.  
Periodically check all fasteners and make sure these are tight.  
Warning: Always stop engine, allow engine to cool, disconnect spark plug wire before  
performing any type of maintenance on your machine.  
DECK CARE  
It is important to clean underside of the mower deck after use to prevent the build-up of grass clippings or  
other debris. Follow steps below for proper cleaning.  
1. Allow the engine to run until it is out of fuel. Do not attempt to pour fuel from the engine.  
2. Disconnect spark plug wire. Refer to engine operator’s manual.  
3. Slowly tip mower so that it rests on the housing.  
4. To prevent oil spills, always tip the mower so that the Air Filter is facing up.  
5. Hold mower firmly and scrape and clean the underside of the deck with a suitable tool.  
6. Gently lower the mower back on its wheels on the ground.  
Warning: Never tip the mower more than 90° in any direction and do not leave the mower tipped for any  
length of time. Oil can drain into the upper part of the engine causing a starting problem.  
MOWER BLADE  
To ensure safe operation, have all blade sharpening, balancing and mounting work carried out by an  
authorized service center. To achieve optimal results, we recommend having the blade checked once a  
year.  
If, in spite of all caution, the blade comes into contact with an obstacle, switch off the engine immediately  
and pull off the spark plug connector. Tilt the lawn mower to the rear and check the blade for damage.  
Always keep the side with the air cleaner facing up. Damaged or bent blades must be replaced. Never  
straighten a bent blade. Never work with bent or heavily worn blades as this will result in vibrations,  
causing further damage to the mower.  
Warning: Risk of injury when working with a damaged blade.  
15  
STORAGE  
CAUTION: Never place any type of storage cover or tarp on the MOWER while it is still hot.  
If the MOWER is being stored for short periods of time (30 to 60 days), add stabilized fuel to the gas tank  
until it is full. Run the engine for 2 – 3 minutes allowing stabilized fuel mixture to circulate through the  
carburetor.  
NOTE: Keeping the fuel tank full, reduces the amount of air and vapor and helps reduce deterioration of  
the fuel. This will also help minimize moisture accumulation common with ethanol blended fuels.  
When storing the mower for extended periods of time:  
1. Start the engine and run it until the tank and fuel line are completely empty and the engine stalls.  
2. Change the oil after each season.  
3. Remove the spark plug. Use an oil-can to fill the cylinder with approx. 2 ml of oil. Slowly pull back  
the starter handle, which will bathe the cylinder wall with oil. Screw the spark plug back in.  
4. Clean the cooling fins of the cylinder and the housing.  
5. Be sure to clean the entire equipment to protect the paint.  
6. Store the equipment in a well-ventilated place.  
16  
TROUBLESHOOTING  
Problem  
Cause  
Solution  
Engine  
disengaged.  
start/stop  
lever  
Engage engine start/stop lever.  
Spark plug wire disconnected. Connect spark plug wire.  
Fuel tank empty or stale fuel.  
Engine not primed.  
Faulty spark plug.  
Fill tank with clean, fresh gasoline.  
Press primer bulb.  
Clean, adjust gap, or replace.  
Clean fuel line.  
Engine fails to start  
Blocked fuel line.  
Engine flooded.  
Spark plug wire loose.  
Wait a few minutes to restart, do not prime.  
Connect and tighten spark plug wire.  
Clean fuel line. Fill tank with clean, fresh  
gasoline.  
Blocked fuel line or stale fuel.  
Engine runs erratic.  
Water or dirt in fuel system.  
Dirty air filter  
Engine oil lever low.  
Air flow restricted.  
Drain fuel tank. Refill with fresh fuel.  
Please refer to engine manual.  
Fill crankcase with proper oil.  
Clean area around and on top of engine.  
Engine overheats.  
Idles poorly.  
Spark plug fouled, faulty, or  
gap too wide.  
Reset gap or replace spark plug.  
Dirty air cleaner.  
Blade loose or unbalanced.  
Bent/damaged blade.  
Please refer to engine manual.  
Tighten and balance blade.  
See an authorized service dealer.  
Do not mow when grass is wet, wait until  
dry to cut.  
Excessive  
vibration/noise  
Mower will not mulch  
grass.  
Wet grass.  
Mow once at a high cutting height, then  
mow again at desired height or make a  
narrower cutting path.  
Excessively high grass.  
Dull blade.  
Uneven cut.  
Sharpen or replace blade.  
17  
EXPLODED VIEW AND PARTS LIST  
18  
Item  
Stock#  
Description  
Qty  
Item  
Stock#  
Description  
Axle closing ring  
Qty  
1
2
3
303190263  
303030036  
303042023  
Vertical shaft engine  
Nylon locknut  
Flat washer  
1
3
3
42  
43  
44  
303050007  
303160470  
303123017A  
4
1
2
Advance gear Right  
Cylindrical pin  
4
5
303041022  
303020274  
Washer  
3
3
45  
46  
203010750  
303180942  
Rear defense cover  
2
1
Hex washer screw  
Rear self drive axle seaming  
6
7
203050381  
303090066A  
303160455  
303160456  
303020468  
203050382  
303010329  
203050383  
302030053  
Side discharge deflector  
Spring Pin shaft  
Torsional Spring  
Side Discharge Bracket  
Hex washer screw  
Side discharge chute  
Self-tapping screw  
Front cover  
1
1
1
1
2
1
6
1
2
47  
48  
49  
50  
51  
52  
53  
54  
55  
303071038  
303160471  
203050398  
303050050  
203021115  
303240504  
303071049  
303010095  
303071047  
Rear adjustment spring leaf  
Advance gear Left  
8" left wheel  
1
1
8
1
9
Axle closing ring  
Rear axle sleeve  
Drive assembly  
2
10  
11  
12  
13  
14  
2
1
Fixed support  
1
Self-tapping screw  
Rubber keeper  
24  
1
Sheath  
15  
303071032  
Front adjustment spring leaf  
1
56  
302080050  
Rubber sheet  
1
16  
17  
18  
19  
20  
21  
303030032  
303020339  
203050393  
303030077  
203050394  
203021112  
Nylon locknut  
Hex washer screw  
Wheel cover  
4
6
4
4
1
4
57  
58  
59  
60  
61  
62  
302120037  
303080491  
303010332  
303030119  
203050388  
203050389  
Grass collector  
Collector holder  
Self-tapping screw  
Square nut  
1
1
8
2
1
1
Flange nylon locknut  
7" right wheel  
Axle sleeve  
Rear base  
Rear block cover  
22  
23  
24  
303043005  
303180934  
303071034  
Corrugated washer  
Front axle seaming  
Axle keeper  
2
1
4
63  
64  
65  
303130336  
203050390  
303130337  
Rear cover torsional spring left  
Rear cover  
1
1
1
Rear cover torsional Spring right  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
303010216  
203050395  
303180943  
303160454  
302040071  
303110033  
203050396  
303160741  
303180937  
303071037  
303043023A  
303020469  
303030087  
303020159  
203050397  
303100065  
203021209  
Self-tapping screw  
7" left wheel  
21" steel deck  
Small pulley  
Belt  
10  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6
2
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
302060025  
303020558  
203040007  
303080488  
303080503  
303030066  
203020336A  
303043010  
303020057  
303030025  
303020442  
303200100  
303080502  
303080489  
303080490  
303160531  
303030065  
Rubber plug  
Flange locknut  
Clip  
1
2
1
1
1
2
2
2
2
2
1
1
1
1
1
1
1
Lower frame left  
Lower frame right  
Nut  
Square Key  
Belt cover  
Knob  
Flat washer  
Saddle washer  
T bolt  
Blade connector  
21" Blade  
Cover nut  
Butterfly washer  
Hex washer screw  
Flange locknut  
Square Neck Bolt  
8" right wheel  
Stamping bearing  
Internal gear  
Hex washer screw  
Cable  
Drive control bar  
Upper frame  
Cutting control bar  
Hook  
Nut  
19  
TWO (2) YEARS LIMITED WARRANTY  
PowerSmart is committed to building equipment that will provide years of dependable service. Our warranties are  
consistent with our commitment and dedication to quality.  
TWO (2) YEARS LIMITED WARRANTY OF POWER SMART PRODUCTS FOR HOME USE.  
PowerSmart (“Seller") warrants to the original purchaser only, that all PowerSmart consumer power tools will be  
free from defects in material or workmanship for a period of two (2) years from date of purchase. If the tool(s) is  
used while providing professional or commercial services, the warranty coverage shall be for a maximum of (90)  
days.  
SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Two (2) Years Limited  
Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the re¬pair or  
replacement of parts, without charge, which are defective in material or workmanship and which have not been  
misused, carelessly handled, or improperly repaired, by person(s) other than an Authorized Seller or Service  
Center.  
Please be aware that normal wear parts are not covered this warranty. This includes drive belts, blades and grass  
bags. Carburetor issues, and/or other damage found to be the result of stale, contaminated or compromised fuel, is  
not covered under this limited warranty.  
To make a claim under this Limited Warranty, you must return the entire power tool product; transportation  
prepaid, to PowerSmart. The owner must include a legible copy of the original receipt, which shall list the date of  
purchase, along with the company’s name where the product was purchased.  
THIS LIMITED WARRANTY DOES NOT APPLY TO ANY ACCESSORY ITEMS INCLUDED WITH THE  
TOOL SUCH AS CIRCULAR SAW BLADES OTHER RELATED ITEMS OR TO ANY REPLACEMENT  
PARTS LISTED UNDER MAINTENANCE.  
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO TWO (2) YEARS FROM DATE OF  
PURCHASE. SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW  
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY  
NOT APPLY TO YOU.  
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES  
(INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE  
OR USE OF THIS PRODUCT. SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT  
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO  
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE  
OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN  
CANADA AND FROM COUNTRY TO COUNTRY.  
For questions, comments, technical assistance or to order repair parts  
Please call toll free at: 1-800-791-9458 (M-F 9am – 5pm CST)  
PLEASE SAVE ALL OF YOUR ORIGINAL RECEIPTS. THIS WARRANTY IS VOID WITHOUT THEM.  
20  

Dixon Lawn Mower ZTR 7523 User Guide
Gravely Lawn Mower 992077 19HP 144Z User Guide
Husqvarna Lawn Mower 36 EL User Guide
Husqvarna Lawn Mower 2748 GLS CA User Guide
Husqvarna Lawn Mower 966495701 User Manual
Snapper Lawn Mower 1691530 User Guide
Snapper Lawn Mower C21400R2 CP21400R2 CP21550V User Manual
Snapper Lawn Mower ESPV21S User Manual
Snapper Lawn Mower P21407R 2 User Manual
Snapper Lawn Mower ZU2014K User Manual