NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Hardware Pack
Assembly Instruction
Parts List
MARCY OLYMPIC BENCH
MWB 716
Warranty
Ordering Parts
Model
MWB 716
Retain This
Manual for
Reference
08-18-03
OWNER'S
MANUAL
IMPEX FITNESS PRODUCTS
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY NOTICE
PRECAUTIONS
This exercise machine is built for optimum safety. However, certain precautions apply
whenever you operate a piece of exercise equipment. Be sure to read the entire manual
before you assemble or operate your machine. In particular, note the following safety
precautions:
1. Keep children and pets away from the machine at all times. DO NOT
leave children unattended in the same room with the machine.
2. Only one person at a time should use the machine.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the machine on a clear, leveled surface. DO NOT use the machine
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the machine. Running
or aerobic shoes are also required when using the machine.
7. Use the machine only for its intended use as described in this manual. DO
NOT use attachments not recommended by the manufacturer.
8. Do not place any sharp object around the machine.
9. Disabled person should not use the machine without a qualified person or
physician in attendance.
10. Before using the machine to exercise, always do stretching exercises to
properly warm up.
11. Never operate the machine if the machine is not functioning properly.
12. A spotter is recommended during exercise.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF
35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES
NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED
BY OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE PACK
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches.
NOTE: It is strongly recommended two or more people assembling this machine to avoid
possible injury.
STEP 1 (See Diagram 1)
A.) Connect the two Rear Upright Beams (#1) by a Cross Brace (#2) in the mid-span. Align the
holes and secure them with one Weight Post (#3), three M10 x 3 1/8” Carriage Bolts (#36),
three ∅ ¾” Washers (#43), and three M10 Aircraft Nuts (#46) on each end of the Cross
Brace.
B.) Insert two Crutches (#4) into the top openings on the Upright Beams. Secure them with two
Lock Knobs (#20) through selected holes to obtain desired height of the Supports.
C.) Place Backrest Adjustment Bar (#14) between the two Upright Beams on the selected bar
holder to obtain desired incline of Backrest
D.) Attach a Spring Clip (#21) onto each Weight Post.
DIAGRAM 1
4
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2 (See Diagram 2)
A.) Attach the Front Stabilizer (#6) to the Main Seat Support (#5). Secure it with three M10 x
2 ¾” Carriage Bolts (#37), ؾ” Washers (#43), and M10 Aircraft Nuts (#46).
B.) Attach the Main Seat Support (#5) to the Cross Brace. Secure it with one Bracket (#7),
two M10 x 3 1/8” Carriage Bolts (#36), two Ø ¾” Washers (#43), and two M10 Aircraft
Nuts (#46).
DIAGRAM 2
5
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3 (See Diagram 3)
A.) Attach the side-holes on the Backrest Supports (#8) to the long pivot on the Main Seat
Support. Place the Backrest Board (#11) onto the Backrest Supports. Secure it with four
M6 x 1 3/8” Hex Bolts (#41) and Ø ½” Washers (#45). Place the other end of Backrest
Board rest against the backrest Adjustment Bar.
B.) Attach the Seat Bracket (#9) to the short pivot on Main Seat Support. Secure it with one
M10 x 4 ¾” Allen Bolt (#38), two Ø ¾” Washers (#43), and one M10 Aircraft Nut (#46).
C.) Place the Seat (#12) onto the Seat Bracket. Secure it with four M6 x 5/8” Hex Bolts (#42)
and Ø ½” Washers (#45).
D.) Use a 4” L-shaped Pin (#35) to secure the Seat inclined position.
E.) Attach the Arm Curl Pad (#13) to the Arm Curl Stand (#10). Secure it with two M8 x 5/8”
Allen Bolts (#40) and Ø 5/8” Washers (#44). Insert the Arm Curl Stand into the top
opening on the Front Stabilizer. Use a Lock Knob (#20) to secure the Arm Curl Stand at
desired height.
DIAGRAM 3
6
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 4 (See Diagram 4)
A.) Attach the Leg Developer (#15) to the Front Stabilizer (#6). Secure it with one Axle
(#19), two M10 x 5/8” Allen Bolts (#39), and two Ø ¾” Washers (#43).
B.) Insert one Foam Tube (#18) halfway through the hole on the Front Stabilizer. Insert two
Foam Tubes halfway through the holes on the Leg Developer.
C.) Push six Foam Rolls (#22) onto the Foam Tubes from both ends. Plug six Foam Roll
End Caps (#29) into the ends.
D.) Attach the Curl Bar (#16) to the bracket on the Leg Developer. Secure it with a 3” L-
shaped Pin (#34). Attach an Olympic Sleeve (#32) onto the weight post on the Leg
Developer. Attach a Spring Clip (#21) to the Sleeve. NOTE: When using the decline
position to do Ab exercises, place at least 30 lbs of weights on the post to hold down the
Leg Developer.
E.) When using Leg Developer, remove the Arm Curl Stand and the Curl Bar.
DIAGRAM 4
7
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
KEY NO. DESCRIPTION
Q’ty
1
2
3
4
5
6
7
8
Rear Upright Beam
Cross Brace
Weight Post
2
1
2
2
1
1
1
2
1
1
1
1
1
1
1
1
1
3
1
3
3
6
2
2
2
2
2
1
6
2
1
1
1
1
1
8
3
1
2
2
4
4
15
2
8
12
2
2
Crutch
Main Seat Support
Front Stabilizer
Bracket
Backrest Support
Seat Bracket
Arm Curl Stand
Backrest Board
Seat
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Arm Curl Pad
Backrest Adjustment Bar
Leg Developer
Curl Bar
Curl Bar Handle
Foam Tube
Axle
Lock Knob
Spring Clip
Foam Roll
Curl bar Handle Grip
∅ 1 1/8” Cone-shaped End Cap
Ø 2 3/8” Bushing
Ø 2” Cone-shaped End Cap
2 3/8” x 1 5/8” End Cap
Ø 1” End Cap
Foam Roll End Cap
2 3/8” x 2” Sleeve
2” x 1 ¾” Sleeve
Olympic Sleeve
M8 x ½” Screw
3” L-shaped Pin
4” L-shaped Pin
M10 x 3 1/8” Carriage Bolt
M10 x 2 ¾” Carriage Bolt
M10 x 4 ¾” Allen Bolt
M10 x 5/8” Allen Bolt
M8 x 5/8” Allen Bolt
M6 x 1 3/8” Hex Bolt
M6 x 5/8” Hex Bolt
∅ ¾” Washer
∅ 5/8” Washer
∅ ½” Washer
M10 Aircraft Nut
1” End Cap
Ø 1 ½” Bushing
9
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPEX INC.
LIMITED WARRANTY
IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal
use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty
extends only to the original purchaser.
repairing, at IMPEX's option.
IMPEX's obligation under this Warranty is limited to replacing or
All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Customer
Service Department at 1-800-999-8899. All freights on products returned to IMPEX must be prepaid by the
customer. This warranty does not extend to any product or damage to a product caused by or attributable to
freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an IMPEX authorized
service center or for products used for commercial or rental purposes. No other warranty beyond that
specifically set forth above is authorized by IMPEX.
IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the product or other damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other
consequential damages or whatsoever natures.
Some states do not allow the exclusion or limitation of
incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal right. You may also have other rights which vary from state to state.
IMPEX INC.
14777 Don Julian
City of Industry, CA 91746
ORDERING REPLACEMENT PARTS
Replacement parts can be ordered by calling our Customer Service Department toll-free at 1-800-999-8899
during our regular business hours: Monday through Friday, 9 am until 5 pm Pacific standard time.
When ordering replacement parts, always give the following information.
1.
2.
3.
4.
Model
Description of Parts
Part Number
Date of Purchase
10
Download from Www.Somanuals.com. All Manuals Search And Download.
|