|
Model FB735
ImageReader Ultra
Color Flatbed Scanner
User's Manual
Version 1.0
Ó
Info Peripherals 1997
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
The information contained in this document is subject to change
without notice.
Info Peripherals makes no warranty of any kind with regard to this
material, including, but not limited to, the implied warranties of
fitness for a particular purpose.
Info Peripherals shall not be liable for errors contained herein or
for incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communication. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for
help.
CAUTION: Any changes or modifications not expressly
approved by the manufacture of this device could void the user's
authority to operate the equipment.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1. INTRODUCTION............................................................................. 1.-1
2. SCANNER INSTALLATION........................................................... 2.-1
2.1 PRECAUTIONS................................................................................ 2.-1
2.2 UNLOCKING THE SCANNER............................................................. 2.-2
2.3 CONNECTING THE CABLE ............................................................... 2.-3
2.4 DOCUMENT PLACEMENT ................................................................ 2.-4
3. SCANNER DRIVER INSTALLATION........................................... 3.-2
3.1 AUTO-INSTALLATION PROGRAM..................................................... 3.-2
3.2 UNINSTALL THE SCANNER.............................................................. 3.-5
4.SCANNER OPERATION & DOCUMENT PRINTING .................. 4.-1
4.1 IMAGE TYPE .................................................................................. 4.-4
4.2 SCANNING PARAMETERS & IMAGE CONTROL.................................. 4.-6
4.3 SCANNING................................................................................... 4.-11
4.4 PRINTING .................................................................................... 4.-13
5. MAINTENANCE.............................................................................. 5.-1
6. TROUBLESHOOTING ................................................................... 6.-1
6.1 QUESTIONS AND ANSWERS............................................................. 6.-1
6.2 TECHNICAL SERVICE...................................................................... 6.-6
7. SPECIFICATIONS........................................................................... 7.-6
7.1 MODEL: FB7................................................................................. 7.-6
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Welcome
Thank you for purchasing an Info ImageReader Scanner. This
product is the result of our efforts to develop high technology
computer peripherals that are easy to use, affordably priced, and
that enhance your computing experience. The FB7 is designed in
an exact A4 size and less weight in an aim to save the most space
possible while maintaining the highest quality scanning results as
well as quality optical resolution at 300 x 600 dpi.
Using this manual
This manual includes complete instructions for scanner
installation, use, and maintenance. Note that se,Ó in this
context, refers to scanner operation independent of the task
performed with the application software. This guide is organized
in a o as you readÓ format. For best results, perform the tasks as
they are presented.
This manual assumes that you have a basic understanding of the
DOS and Windows operating system. As a convention, this guide
presents all references to guide names or sections in italics, and
commands you must type at a command line are presented in a
different typeface.
Assistance
If you experience difficulties and cannot find solutions within this
guide, please contact Info Technical Support Department at
(800) 777-3280, Monday through Friday, between 8:00 AM and
4:30 PM, Pacific time. If you wish, you may fax questions to (408)
538-2577, or email questions to [email protected].
1.-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Provide a fax number or email address for return contact. We
maintain a BBS at (408) 538-2580 that contains the latest updates
and fax on demand system at (408) 538-2585.
What is TWAIN?
TWAIN is the interface that links the scanner with scanning
software applications. TWAIN is an industry standard that enables
you to use the ImageReader with any TWAIN-compliant software
application.
With the introduction of Windows 95, the TWAIN specification
has been overhauled to take advantage of the 32-bit architecture.
Your scanner installation software contains two TWAIN sources
— one for using your scanner with 16-bit applications (i.e.
InfoCenter Lite) and one for using your scanner with 32-bit
applications (i.e. Adobe Photoshop). Use the following as a guide
to select the appropriate source.
16-bit applications are legacy Windows 3.x programs that you are
running under Windows 95.
32-bit applications are programs specifically designed for
Windows 95, to take advantage of performance enhancements
provided by the new architecture.
Please Note: Windows 3.1x does not support 32-bit applications,
therefore the 16-bit scanning source should always be selected
when running Windows 3.1x. You may experience scanning
problems if you do not use the appropriate source.
A note about application software
The scanner hardware by itself is not very useful. It takes a
combination of the scanner hardware and application software to
1.-2
Download from Www.Somanuals.com. All Manuals Search And Download.
perform any task. Before scanning, you need to choose the
appropriate application(s) to use for the task at hand. Please read
this section to gain an understanding of the types of scanning
software there are.
Scanning software generally falls into two groups, Graphics
(image editing), or OCR (Optical Character Recognition). Each
type has specific features designed to address the technical
challenges faced in the scanning of graphics or of text.
Graphics: Software provides the user with image editing tools for
performing extensive modifications to art, photographs, or other
continuous tone images. While having the ability to scan text,
unlike OCR software it is not designed to specifically identify
individual characters. Any image scanned using a graphics
program can only be saved in a graphics file format (i.e. Tiff or
Gif). It cannot be saved as an editable text file. Your system
software CD includes iPhoto Express image editing software to
facilitate your image editing requirements.
OCR: Software in this category is designed to recognize
alphanumeric characters in preparation for export to word
processing and desktop publishing applications. In other terms, it
creates text files. OCR software will not provide image editing
capabilities. If there is no intention of editing a given piece of text
(with or without graphics), it may be simpler to scan and save it as
a graphic. OCR is one of many scanning control features included
in the InfoCenter application software included on your system
software CD.
Additional types of applications are available that offer solutions
for special or unique tasks. These include document storage, form
scanning, fax utilities, copy utilities, custom screen saver creation,
photo album creation, and so on. If applications are intended to
link directly to the scanning device, look for the TWAIN-
1.-3
Download from Www.Somanuals.com. All Manuals Search And Download.
compliant specification. If compliant, you may use these
application to scan with your ImageReader scanner.
Figure 1-1 shows how the scanner is packed. Please check all the
items against your checklist contained in the box or against this
diagram. If there are any missing or damaged parts, please contact
your nearest dealer immediately for replacement or repair.
1.-4
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Power Adapter, 2. Cushion 3. Manual, Driver Kit CD.
4. D25P Cable, etc 5. Scanner 6. Carton
Figure 1-1 Scanner packing
1.-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Scanner Installation
2.1 Precautions
Ÿ
Keep the scanner out of direct sunlight. Direct
exposure to the sun or excessive heat may cause
damage to the unit.
Ÿ
Ÿ
Ÿ
Do not install the scanner in a humid or dusty place.
Be sure to use the proper AC power source.
Place the scanner securely on an even, flat surface.
Tilted or uneven surfaces may cause mechanical or
paper-feeding problems.
Ÿ
Ÿ
Retain the scanner box and packing materials for
shipping purposes.
Remember to unlock the scanner before use (2.2)
2.-1
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2
Unlocking the Scanner
As shown below, unlock the scanner by turning the scanner
lock to the Unlock position.
1. Lock Position 2. Unlock Position
Figure 2-1
Unlocking the Scanner
2.-2
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3
Connecting the Cable
Connect the power cable and signal cable as shown below.
1. Scanner
2. Power Supply
3. D25P Cable
5. Printer Cable
4. PC Parallel Port
Figure 2-2 ImageReader Ultra scanner cable connection
2.-3
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4
Document Placement
As shown in Figure 2-3, place the document on the glass
with the text facing away from you.
3
1. Document Cover
3. Reference Frame
5. Document Board
2. Document Pad
4. Glass
6. Document
Figure 2.3 Document Placement
2.-4
Download from Www.Somanuals.com. All Manuals Search And Download.
3. System Requirements
System requirements are largely dependent on the ”workÓ
performed. By work, we are referring to the task or operation
performed using the scanner in conjunction with application
software.
Because scanners are capable of inputting large amounts of data in
relatively short periods of time, they commonly push computer
systems to the limits of their capabilities. Before beginning any
scanning task or operation, carefully consider your system
processing capabilities, especially processor speed, RAM, and
available hard disk space. OCR processes, fax operations, and the
processing of simple black & white graphics are least demanding.
High resolution scanning of large images in full color creates an
extreme demand for processor time and memory.
When you are scanning with the TWAIN interface, the number
labeled image size (calculated in bytes) provides the working file
size that is the result of the selected scanning mode, resolution,
and image size. Take careful note of this information.
Minimum and recommended system requirements are:
* IBM compatible PC 386/486, Pentium or later;
* Microsoft Windows 3.1,Windows 95, Windows NT;
* One printer port available (enhanced parallel port
recommended);
* 20 Megabytes of available hard disk space for installation;
* 8 Megabytes of RAM (16 Megabytes or higher
recommended);
* A video graphics array (VGA) monitor;
3.-1
Download from Www.Somanuals.com. All Manuals Search And Download.
* A Microsoft Windows-compatible pointing device (e.g.,
mouse);
* A CD ROM drive.
3.1
Scanner Driver Installation
3.2 Auto-Installation Program
Installation procedures of FB7 Scanner driver with Info
Peripherals Auto-installation Program are as follows:
1. Start Windows 3.1 or Windows 95.
2. Insert FB7 CD into your CD ROM drive.
In Windows 3.1 or higher
3. From the File Menu, choose RUN, type d:\driver\
FB7.exe (d represents the letter for your current CD ROM
drive. If your CD-ROM drive has a different letter
designation, substitute the correct letter for the letter
"D"). Click O.K.
3.-2
Download from Www.Somanuals.com. All Manuals Search And Download.
In Windows 95 or Windows NT
3. Press the Start button, choose RUN, type d:\driver\
setup.exe (d: the CD ROM drive in use), and then click
O.K. (See Figure 3-1,3-2)
4. Follow the on-screen instructions to complete the
installation.
Fig. 3.1
3.-3
Download from Www.Somanuals.com. All Manuals Search And Download.
3.-4
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3
Uninstall the Scanner
You can uninstall the scanner by selecting
Start….Programs…. Scanner FB7 and double clicking on
the Uninstall command from the Scanner FB7.
3.-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
Scanner Operation & Document
Printing
Scanning Images from within an Application (TWAIN)
1. Open your TWAIN compliant application and
choose Select Source from the File menu. If the
Select Source menu options are not available
from the File menu, see the user guide of your
application to learn how the TWAIN link is used.
2. A dialog box appears containing the different
TWAIN sources that you can choose from to
bring an image into your application.
3. If you are scanning from a 16-bit application (i.e.
InfoCenter Lite or ImagePals GO!) you need to
select the 16-bit scanning source - ImageReader
Ultra\16v4.00. If you are scanning from a 32-bit
application (i.e. Adobe Photoshop) you need to
select the 32-bit scanning source - ImageReader
Ultra\32v4.00. Check your application manuals
if you are unsure whether you are scanning from
a 16 or 32 bit application.
Please note: The 32-bit source is only available
under Windows 95. Windows 3.1 users should
always select the 16-bit scanning source.
If the wrong source is selected you will receive a
"cannot access TWAIN scanner driver" error
message. Repeat steps 1-3 and select the correct
source. If the problem persists, restart your
computer with the correct source selected.
4.-1
Download from Www.Somanuals.com. All Manuals Search And Download.
4. If you have previously selected a different
source, you will need to select the ImageReader
Ultra source again prior to scanning with the
ImageReader Ultra scanner.
5. Place the image to be scanned face down on the
glass (Fig. 2-3).
6. From the File menu, select Acquire.
7. FB7 TWAIN user interface will pop up on the
screen. Click on the Preview (preview allows
your to make adjustments to the scan area prior
to final scan) or Scan button to get the image.
4.-2
Download from Www.Somanuals.com. All Manuals Search And Download.
FB7 TWAIN user interface:
4.-3
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1
Image Type
FB7 provides five image types as explain in below:
Line art
Error Diffusion
Halftone
Scanning Source
Gray Scale
Color
Scanning Source
Two scanning sources are provided- flatbed as well
as transparency.
Line art
Line art presents the image in black and white only
and there are no intermediate shades of gray in
between.
Halftone
In addition to the black and white display,
Halftone can present the gray shades of a scanned
image by varying the dot (pixel) sizes.
Error Diffusion
While taking up but a minimum storage space,
error diffusion gives good image texture and
excellent image details.
4.-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Gray (256 levels gray scale)
Gray presents a 256 shades of gray in an image.
256 Color
The 10 bits color information presents 256 colors
and gives more tonal range and subtlety in an image.
True Color (16.7 million colors)
The 30 bits True Color presents 16.7 million color
and give much more tonal range and details in a
color image.
4.-5
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2
Scanning Parameters & Image Control
Resolution: The number of dpi (dots (pixels) per square inch)
that the FB7 uses for a scan. Generally, denser
pixel coverage per square inch (higher resolution)
results in sharper images. Please note: Scanning
resolution has a direct impact on the scanned image
file size - higher resolution settings result in a larger
file size. Increased demands on your disk space
due to high resolution settings can also slow down
the scanning process. Avoid exceeding the
recommended resolution settings for your scanning
task (refer to the scanning software User Guide).
Brightness: Adjusts the lightness or darkness of an image. The
higher the value, the brighter the image.
Contrast:
Adjusts the range between the darkest and the
lightest shades in the image. The higher the
contrast, the bigger the different gray scales.
4.-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Level
Auto Area
Descreen
Color Match
Reset
Image Information
Auto Level: Optimizes the output quality of the scanned image.
Auto Area: Automatically sets the whole document as the scan
area, no matter what its size.
Descreen:
Eliminates the Moire patterns commonly found in
printed matter (refer to figure 4-4)
4.-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Before descreen
After descreen
Figure 4-4
4.-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Match: Adjusts the color quality of the image to make it
close to the original. This function uses default
parameters to adjust the image.
Reset:
Resets the current scanning parameters to the
original parameters.
Invert:
The invert command reverses the brightness and
the color in the image. For color images, each pixel
will be changed into its complementary color at the
command of Invert.
Calibration: Defines Brightness for the scanner. Users are
recommended to calibrate the light source if the
scanned image looks undesirable or comes out to
be too dark.
Quality/Speed Mode:
Users can select the mode to perform scanning
according to their own need. Select quality mode
scanning if your emphasis is on the quality of the
scanned image. Or, select speed mode scanning if
you want to speed up the scanning process.
Pixel/Inch/Cm:
Represents the different measuring systems to be
used in each scan.
Set Gamma: Adjusts the midtone of the image without losing
details of the lightest and the darkest areas at the
same time.
4.-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Information:
Gives specific information of the previewed image.
Such as:
1. Image File size (varies according to scan
settings)
2. Size of the scanning area
3. Position of the scanned image within
he preview window
4.-10
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3
Scanning
Preview:
Previews the image to be scanned, allowing you to
adjust to scan area prior to final scan.
Executes the final Scan.
Scan:
Exit:
Cancels the current scan job.
Document Size: To designate the size of your document, just click
on its icon on the margin of the preview window
As shown in the figure below, in the Preview window, you can define
the area to be scanned by dragging the four cursor auxiliary lines.
4.-11
Download from Www.Somanuals.com. All Manuals Search And Download.
4.-12
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4
Printing
Connect the printer cable as shown below.
1. Scanner
2. Power Supply
3. D25P Cable
5. Printer Cable
4. PC Parallel port
Caution:
1. Be sure to power on the scanner if you want to do pass-
through printing.
4.-13
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Do not scan and print at the same time.
3. If your PC does not support EPP mode or have pass-through
compatibility problem, please contact your authorized local
computer dealer or Info Peripherals, Inc. at (800) 777-3208 ext.
2534 to order an EPP interface card.
4.-14
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Maintenance
Clean the Document Board Glass:
As shown in Figure 5-1, wipe the scanner glass with a piece of
soft clean cloth to rid the glass of dust or toner particles.
1. Document Board Glass
Figure 5-1 Clean the document board glass.
5.-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Troubleshooting
If you have any operational problem, please check the
following troubleshooting hints.
6.1
Questions and Answers
Question: Why do I receive the error message ”Scanner Test
FailedÓ when attempting to scan?
The following steps should also be followed if your scanner connection test
(described in step 3 of Quick Start Guide) is unsuccessful.
Answer 1: Verify that the correct scanning source was selected. Open
”Select SourceÓ from the File menu. If you are using a 16
bit application to scan (i.e. InfoCenter Lite) select the 16-bit
scanning source (ImageReader Ultra\16v4.00) If you are
scanning from a 32-bit application (i.e. Adobe Photoshop)
select the 32-bit scanning source (ImageReader
Ultra\32v4.00). Then attempt to scan - if the problem persists
- restart your computer.
Please note: The 32-bit source is only available under
Windows 95. Windows 3.1 users should always select the
16-bit scanning source.
Answer 2: Check that your scanner is connected and tightly screwed in to
the computer’s port
Answer 3: Check that the AC power cord is connected to the scanner and
power outlet.
Answer 4: Follow instructions below to adjust your computer’s BIOS
printer port setting to EPP, ECP or SPP (according to what
your computer supports)
Changing your BIOS Setting
6.-1
Download from Www.Somanuals.com. All Manuals Search And Download.
The FB735 - ImageReader Ultra scanner requires that your computer is a
PC System with a 486 or Pentium Processor with PCI slots, it must have a
motherboard that supports EPP, ECP or SPP parallel port. EPP is
recommended in order to achieve the fastest scans. After installing the
scanner, you may need to change Printer Port (LPT type) in your BIOS or
CMOS settings to accommodate desired (EPP, ECP or SPP) connection.
Please consult your computer’s hardware manual for instructions if you are
unsure about how to accomplish this. If your system does not support
EPP, SPP or ECP call (800) 777-3208 ext. 2534 to order an EPP
interface card.
Caution!
Changing your BIOS or CMOS settings can render your computer system
inoperable. Use caution to ensure that only the Parallel mode is changed.
Please consult your computer hardware manual for instructions specific to
your system.
To Change Your Parallel Port Mode Setting (in most systems):
1. Restart your computer and when in start-up mode press your delete
key, this will take you to the BIOS or CMOS menu.
2. locate the Parallel Port option, it will tell you what address the
parallel port is set for and the mode of the port.
3. Read your screen for instructions on how to change settings, and
change your LPT setting to EPP or ECP.
4. Save changes and exit.
Question:
Why do my scanning results seem dark?
Answer: 1) Modify the Gamma setting to 1.8 for your monitor and, when
printing, set Gamma to 2.2 for your printer (refer to your
monitor/printer manuals for instructions on performing
gamma adjustments).
2) Prior to scanning, increase the Brightness setting of the
TWAIN user interface.
Question: The scanning speed of my scanner is much slower than that
of those installed at other computers. Can I speed it up?
Answer:
Set your PC printer port to the EPP mode in your BIOS setup.
6.-2
Download from Www.Somanuals.com. All Manuals Search And Download.
EPP is the fastest and most recommended mode to use. If you
do not have this option, you may need to purchase an EPP
Interface card. Call Info Peripherals at (800)777-3208 ext.
2534.
Question: How long does it take for the scanner to initialize?
Answer:
If your printer port supports SPP mode only, it takes about two
minutes for the scanner to initialize. If your printer port
supports EPP mode, the initialization speed is much faster,
about 20 seconds.
Printer Questions
Question: What is the function of the Pass-Through Port?
Answer:
The ImageReader Ultra is conveniently equipped with a pass-
through port. This port allows you to connect any other
parallel port device such as a printer to the scanner so that
they can share the same port from your computer.
Question: How do I use the pass-through port?
Answer:
Connect the printer’s cable to the port labeled Printer on the
back of the scanner. Both the scanner and the printer are now
sharing the same parallel port and can be used at any time,
except in tandem.
Question: Sometimes my pass-through printing does not work at all,
why?
Answer:
Your scanner may be off. When performing pass-through
printing, be sure the scanner is on (indicated by the power
light on scanner front).
Question: After installing Works for Windows, my overall printing speed
has slowed dramatically. Why?
Answer:
If you have installed Works for Windows, it adds entries into your
win.ini file for the Windows Printing System (WPS). This entry
will slow your printing speed considerably. To correct the
problem, perform the following adjustments:
1. Edit your win.ini file. From Windows 3.x, click File then
6.-3
Download from Www.Somanuals.com. All Manuals Search And Download.
select Run. Type in sysedit and click OK. From Windows 95,
click Start, select Run. Type in sysedit and click OK.
2. Close all windows that appear and leave the one labeled
C:\windows\win.ini (The title may be different if you have
windows on a different drive or different directory name. In
either case you will see win.ini at the end of it)
3. Click search then find. Type in the text: MS Text Converters
and click Find.
4. You should see 2 lines, one that starts with MSWorksWin.
The line below it starts with Works for Dos 2.0.At the end of
both lines delete the entry ,wps.
5. Now click File then Exit. When prompted to save changes, do
so. After a restart of your computer, your printing should be
back to normal
If you are experiencing any printer problems check the following:
1) Check scanner cable connection. Be sure the cable is
plugged into the port marked Printer on the back of the
scanner
2) Adjust your printer spooler. Occasionally there may be a
conflict between ImageReader Ultra scanner and specific
printers. An indication of this occurs when an attempt to print
prompts the error message printer not foundÓ or printer not
recognizedÓ (assuming your computer’s BIOS or CMOS is
already set to EPP). In this case, you need to adjust your
printer spooler to print directly to your printer:
To modify the printer spooler:
1. Click on START> SETTINGS> PRINTERS.
2. Right click with your mouse on your default printer, then
select Properties from the drop-down menu
3. Click on the Details tab
4. Click on the Spool settings button.
5. In the spool settings window select the option to Print
Directly To The Printer.
6. Click on OK then OK once again.
7. If prompted to reboot please do so.
6.-4
Download from Www.Somanuals.com. All Manuals Search And Download.
If the problem persists, you will need to disable the Bi-
Directional printing option.
To disable the Bi-Directional printing option:
The process of disabling the bi-directional printing option is different for
individual printers. Please consult your printer manual or contact the printer
manufacturer for instructions specific to your printer.
Please note: Pass-through printing may pose a problem for some printers. In
this case, you may need to add a second printer card to your
computer for printing purposes, or you may call your local
authorized computer printer dealer for further support.
6.-5
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 Technical Service
Info Peripheral provides technical support free of charge
for the first 90 days after purchase. To ensure the fastest
possible service, please prepare the following information
prior to contacting us:
Ÿ
Ÿ
Scanner serial & revision number (located on the
bottom of the scanner);
Hardware configuration (e.g., your host CPU type,
RAM size, free disk space, display card, interface
card...);
Ÿ
The name and version of your scanning software
application;
Ÿ
Ÿ
The version of your scanner driver.
Version of Windows (3.1x or 95)
7. Specifications
All specifications are subject to change without notice.
7.1
Model: FB7
Scanner Type:
Optical Resolution:
Flatbed Scanner
Up to 300 dpi * 600 dpi
(H*V)
Maximum Resolution:
Scanning Modes:
9600 dpi
Black & White mode
Halftone mode (64-step)
7.-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Error diffusion
10-bit gray scale
30-bit color
Document Size
Interface:
A4, B5, A5, business card
Printer port (supports
SPP/EPP for PC)
100Vac~240Vac,
50~60Hz, external
12 watts (12Vdc,1A)
399 x 260 x 73 (mm)
2.7kg (5.96lbs)
Power Source:
Power Consumption:
Dimensions: (WxDxH)
Weight:
7.-7
Download from Www.Somanuals.com. All Manuals Search And Download.
EC Declaration of Conformity
According to EN45014
Manufacturer's Name:
Info Peripherals, Inc.
FB7
Model Number :
conforms to the following Product Specifications:
Emission:
EN 50081-1 (1992)
EN 55022 (Class B)
(Conducted Radiated) (1994)
EN 60555-2 (Harmonics) (1987)
EN 60555-3 (Flicker) (1987)
Immunity:
EN50082-1 (1992)
IEC 1000-4-2 (ESD) (1995)
IEC 1000-4-3 (RS) (1995)
IEC 1000-4-4 (EFT/Burst) (1995)
IEC 1000-4-5 (SURGE) (1995)
Date:
December 1995
7.-8
Download from Www.Somanuals.com. All Manuals Search And Download.
|