IBM Computer Drive 71P7279 User Manual

ꢀꢁꢂ  
48X-20X Internal IDE  
CD-ROM Drive  
User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iv 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About this book  
This manual contains instructions for installing, configuring, and  
troubleshooting the IBM® 48X-20X Internal IDE CD-ROM Drive. The manual is  
divided into the following parts:  
Part 1: Installation and user’s guide  
This part contains the product description and expanded installation  
instructions in the following languages:  
v English  
v French  
v Spanish  
v Italian  
v Brazilian Portuguese  
v Traditional Chinese  
v Japanese  
Part 2: Appendixes  
The appendixes contain inofrmation about product specifications, problem  
solving, warranties, and help and service. It also contains the product  
warranties and notices.  
Note: The illustrations in this manual might be slightly different from your  
hardware.  
Registering your option  
Thank you for purchasing this IBM product. Please take a few moments to  
register your product and provide us with information that will help IBM to  
better serve you in the future. Your feedback is valuable to us in developing  
products and services that are important to you, as well as in developing better  
ways to communicate with you. Register your option on the IBM Web site at  
http://www.ibm.com/pc/register  
IBM will send you information and updates on your registered product unless  
you indicate on the Web site questionnaire that you do not want to receive  
further information.  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v
 
vi 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety information  
Before installing this product, read the Safety Information.  
Antes de instalar este produto, leia as Informações de Segurança.  
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.  
Læs sikkerhedsforskrifterne, før du installerer dette produkt.  
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety  
Information.  
Avant dinstaller ce produit, lisez les consignes de sécurité.  
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.  
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.  
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.  
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette  
produktet.  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
vii  
 
Antes de instalar este produto, leia as Informações sobre Segurança.  
Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy.  
Antes de instalar este producto lea la información de seguridad.  
Läs säkerhetsinformationen innan du installerar den här produkten.  
viii 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part 1: Installation and users guide  
The IBM®48X-20X Internal IDE CD-ROM Drive can read a compact disc (CD)  
containing approximately 680 MB1 of information. It is designed for installation  
in a personal computer that uses the integrated drive electronics (IDE) or the  
enhanced IDE architecture.  
The CD-ROM device delivers data up to 48 times the standard CD-ROM  
speed, delivering data at up to 7200 KB2 per second. The drive reads compact  
discs that meet the ISO-9660 and High-Sierra Group (HSG) standards. It also  
reads multiple-session, extended architecture (XA) discs, such as the Kodak  
Photo CD.  
Product description  
In addition to this book, the option package includes:  
v 48X-20X Internal IDE CD-ROM Drive  
v One Yaudio cable, one audio cable  
v Four mounting screws (M3 x 5 mm, slotted)  
v One IDE cable for connecting two IDE devices  
v Laser Safety Guide for CD-ROM drives  
Contact your place of purchase if an item is missing or damaged. Be sure to  
retain your proof of purchase. It might be required to receive warranty service.  
You can find information on how to get help, technical support, and warranty  
calling for technical support, refer to Appendix B. Problem solvingon  
Before you begin  
Determine whether your computer meets the minimum requirements; see  
System requirementson page 1-2 for details. Read the following information  
before you start your installation.  
You must complete the following steps to install the drive:  
1. Determine which IDE connector to use and the corresponding configuration  
setting.  
1. MB equals approximately 1 000 000 bytes when referring to storage capacity.  
2. KB equals approximately 1024 bytes when referring to data transfer speeds.  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-1  
 
2. Place or change the configuration jumper on the drive (and possibly make  
changes to the configuration jumpers of other devices).  
If you do not understand these procedures or are unsure about your ability to  
perform all the procedures described, have a qualified computer technician  
install the CD-ROM drive for you.  
System requirements  
Before you begin installing the drive, be sure your computer meets the  
following system requirements.  
v Minimum microprocessor: 80486  
v Minimum RAM: 4 MB  
v 5.25-inch diskette drive  
v Available IDE connection  
v Available internal power connection  
v Available drive bay  
v One of the following operating systems:  
®
Microsoft Windows® 95  
®
Microsoft Windows 98  
Microsoft® Windows NT® 4.0  
Microsoft Windows 2000 Professional  
Microsoft Windows Millennium Edition (Me)  
Handling instructions  
To protect your device during installation, observe the following precautions:  
v Handle the drive with care. Dropping or jarring the drive can damage the  
components inside the drive housing.  
v Keep the device in its antistatic bag until you are ready to install the drive in  
your computer. Limit your movements. Movement can cause static electricity  
buildup.  
v Do not force insertion of the power cable. Doing so might damage the  
connector or the drive.  
1-2 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Front view of the drive  
Refer to the illustration to identify parts that might be referred to in the  
installation instructions.  
ꢀ1ꢁHeadphone jack. Plug headphones in here for audio output.  
ꢀ2ꢁVolume control. Adjust this dial to control volume.  
ꢀ3ꢁCD tray. Use the CD tray to load a CD into the drive.  
ꢀ4ꢁBusy indicator. This light comes on when the drive reads a data CD or  
plays an audio CD.  
ꢀ5ꢁManual-eject hole. Use this to eject the CD tray if the Eject/Load button is  
not operating correctly.  
ꢀ6ꢁEject/Load button. Push this button to open or close the CD tray.  
Back view of the drive  
Refer to the illustration to identify parts that might be referred to in the  
installation instructions.  
ꢀ1ꢁReserved.  
ꢀ2ꢁAudio-out connector. This connector is used to connect the CD-ROM drive  
to an audio adapter.  
ꢀ3ꢁConfiguration pins. The jumper placement on these pins determines the  
priority of the CD-ROM drive on the IDE bus.  
Part 1: Installation and users guide 1-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ꢀ4ꢁIDE connector. This is used to connect the CD-ROM drive to the IDE cable.  
ꢀ5ꢁDC power connector. This is used to connect the dc power cord to the  
CD-ROM drive.  
Installing the drive  
Follow these steps to install the CD-ROM drive in your computer.  
Step 1. Opening the computer  
1. Turn off the computer and all attached devices.  
2. Unplug the power cords for the computer and all attached devices.  
3. Remove the cover from the computer.  
Step 2. Unpacking the drive  
1. Before opening the antistatic bag that the drive is packed in, touch it to an  
unpainted metal surface for at least two seconds. This will drain the static  
electricity from the package and your body.  
2. Remove the drive from the antistatic bag. If you must put the drive down,  
place the antistatic bag on a flat padded surface, such as a magazine, and  
place the drive on the antistatic bag.  
Step 3. Selecting the IDE port  
Newer computers typically have two IDE ports, each of which can support two  
devices. Typically, the IDE port to which your hard disk drive is connected is  
the primary IDE port. The other IDE port is the secondary port. The IDE port  
and the cable position that you select determine which configuration jumper  
setting that you use for the drive.  
v If you have two IDE ports, connect the CD-ROM drive to the secondary IDE  
port on your system board or IDE adapter. If the CD-ROM drive is the only  
device on the secondary IDE port, use the primary configuration setting. If  
the CD-ROM drive is the second device on the secondary port, use the  
secondary configuration setting.  
v If you must attach the CD-ROM drive to the primary IDE port (the same  
port as a hard disk drive or other fast device), use the secondary setting for  
the CD-ROM drive and the primary setting for the faster device. In some  
instances, you might need to change the hard disk drive configuration  
setting to master-with-secondary-present when attaching a secondary device  
on the same cable. For further information on setting configuration jumpers  
on other devices, refer to the documentation that came with your computer  
or with the device in question.  
v Some non-IBM computers support the cable-select setting, where the  
position of the device on the cable determines whether a device is primary  
1-4 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
or secondary. See the documentation that came with your computer to  
determine if your computer supports this setting.  
Step 4. Setting the configuration jumper  
The illustration shows the primary ꢀ1ꢁsetting, the secondary (or slave)  
ꢀ2ꢁsetting, and the cable-select ꢀ3ꢁsetting. Configure the CD-ROM drive by  
placing the jumper over the set of pins corresponding to the setting you chose  
v If you are configuring the CD-ROM device as primary, set the jumper to the  
master ꢀ1ꢁ device setting. (This is how the drive is set when it is shipped.) If  
there is a second device on the IDE port, make sure that device is configured  
as secondary.  
v If you are configuring the CD-ROM device as secondary, set the jumper to  
the secondary ꢀ2ꢁ device setting. Make sure that the other device on the IDE  
port is configured as primary (or primary-with-secondary-present).  
v If you are configuring the CD-ROM device as cable-select, set the jumper to  
the cable-select ꢀ3ꢁ device setting. If there is another device on the IDE port,  
make sure that the second device is also configured for cable-select.  
Step 5. Mounting the drive in the bay  
Attention: Be sure to use the M3 x5 mm mounting screw in the option  
package. Using screws that are too long might damage the drive  
You can mount the CD-ROM drive horizontally or vertically in the computer. If  
you mount the drive vertically, you must secure any CDs you place into the  
drive before the drive tray is closed, or the CD-ROM drive will not be able to  
read the CD correctly. For further instructions on securing your CDs in a  
vertically mounted drive, go to Loading a CDon page 1-9.  
1. Slide the drive into the bay. Your computer might have specific required  
procedures for installing storage devices. Refer to the documentation that  
came with your computer for further instructions.  
2. Align the drive-bay screw holes with the threaded holes in the drive  
housing or mounting bracket; then thread the screws in loosely to check  
their positions. Usually two screws are used on each side.  
Part 1: Installation and users guide 1-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Check to make sure the alignment is correct; then tighten the screws to  
secure the drive. Do not overtighten.  
Step 6. Attaching the cables to the drive  
Connect the cables to the CD-ROM drive as follows.  
1. If you have an audio adapter, locate the included audio cables and  
determine which cable best fits the CD audio-in port on your audio  
adapter. Connect one end of the selected audio cable to the device  
audio-out connector ꢀ1ꢁ, and the other end of the cable to your audio  
adapter CD audio-in port. Save the other cable in case you use a different  
audio adapter in the future.  
2. Attach a 40-pin IDE cable connector ꢀ2ꢁto the IDE connector on the drive.  
Align the cable so that the color-coded edge is closest to the power cable  
connector ꢀ3ꢁ. Use the IDE cable provided with this option if there is no  
cable attached to the IDE port or if there is only one device connector on  
the IDE cable.  
3. Attach a four-pin power cable ꢀ3ꢁ to the device dc power connector.  
Step 7. Completing the hardware installation  
1. Be sure that the drive is securely mounted and the connectors are firmly  
attached.  
2. Be sure that the cables do not interfere with the computer cover and do not  
block the power-supply fan blades or air-flow paths.  
3. Reinstall the computer cover.  
4. Reconnect all devices and check any devices that might have become  
disconnected, such as the keyboard, mouse, and monitor.  
5. Connect all power cords to electrical outlets.  
1-6 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step 8. Updating your computer configuration  
After you have completed the hardware installation, restart your computer.  
Usually, the configuration-setup information screen is displayed. If this screen  
is not displayed, check your computer documentation for information about  
accessing the configuration or setup utility program.  
To see the configuration information for most IBM computers, press the F1  
button during startup. When you have finished reviewing the information,  
save the changes and exit.  
Note: Some older computers with one IDE port might not display the  
CD-ROM drive information when you review the configuration-setup  
information. You still can use the CD-ROM drive in this situation if you  
have correctly completed the installation.  
Step 9. Installing device drivers  
This section contains the instructions for installing device drivers for the  
CD-ROM drive, based on the operating system you are using.  
Note: User requirements vary; the device driver settings for that operating  
system can be customized. If your computer does not work well with  
the default settings given in the installation instructions in this section,  
on page A-1 for information on customizing your device driver  
configuration settings.  
Device driver for Windows 95, Windows 98, Windows NT, Windows  
2000, and Windows Me  
Windows 98 and Windows Me automatically detect the CD-ROM drive and do  
not present any installation screens. If the driver installation screens are  
displayed after your operating system starts, follow the instructions on the  
screen to install the device drivers. Consult the documentation that comes with  
your operating system for more information.  
Part 1: Installation and users guide 1-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use and care of the drive  
This section includes instructions for the proper care of CDs and the care and  
operation of your CD-ROM drive.  
Caring for a CD  
CDs are high-density media that must be handled with care and kept clean to  
insure that they remain readable. These precautions will help to prolong the  
life of your CDs.  
Attention: Wiping a CD using a circular motion might cause loss of data.  
v Handle the CD by the edges or by the center hole. Do not touch the data  
surface of the CD.  
v To remove dust or fingerprints, wipe the CD from the center to the edge  
with a soft, lint-free cloth.  
v Do not write on the surface.  
v Do not place the CD in direct sunlight.  
v Do not use commercial cleaners to clean the CD.  
v Do not bend the CD.  
Caring for the CD-ROM drive  
To protect your CD-ROM drive during operation, observe the following  
precautions.  
v Remove an CD from the drive before moving the drive.  
v Do not insert foreign objects into the drive.  
v Do not remove the drive cover or attempt to service the drive.  
v Do not operate the drive under any of the following conditions:  
High temperature, high humidity, or direct sunlight  
1-8 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Excessive vibration, sudden shock, or inclined surface  
Excessive dust  
Loading a CD  
To load a CD into a horizontally mounted CD-ROM drive do the following:  
1. Press the Eject/Load button. The tray slides out of the drive.  
2. Insert the CD into the loading tray with the label facing up.  
3. Close the loading tray by pressing Eject/Load button, or by gently pushing  
the tray in.  
Attention: Do not force the tray to open; do not insert foreign objects into  
the CD tray.  
Part 1: Installation and users guide 1-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To load a CD into a vertically mounted CD-ROM drive do the following:  
1. Press the Eject/Load button.  
2. Look at the illustrations and compare them to your loading tray.  
v If your loading tray looks like the left illustration, insert the CD carefully  
so that the edges of the CD are underneath the tabs on the loading tray.  
These plastic tabs cover the edges of the CD and hold it in place. The  
tabs are attached to the tray itself and cannot be moved.  
v If your loading tray looks like the right illustration, insert the CD into  
the tray, and gently push the movable tab forward to hold the CD in  
place.  
3. Close the loading tray by pressing the Eject/Load button, or by gently  
pushing the tray in.  
1-10 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manually ejecting a CD  
If you press the Eject/Load button and the tray does not slide out, turn off the  
computer. Straighten a large paper clip to form a tool, as shown in the  
illustration below. The straightened end must extend at least 45 mm (1.8 in.).  
Insert the extended end into the manual-eject hole on the front of the drive  
(see Front view of the driveon page 1-3 ). Push the paper clip into the hole  
until the tray opens. Gently pull out the tray until you can remove the CD.  
45 mm  
1.8 in  
Playing an audio CD  
To play an audio CD, you must have an audio-CD program installed in your  
computer. Windows 98, Windows Me, Windows NT, and Windows 2000  
applications include audio CD player programs.  
For more information on using your audio playback software, see the  
documentation that comes with your operating system or your computer.  
Windows 95, Windows 98, Windows NT 4.0, Windows 2000,  
or Windows Me  
To use the audio utility do the following:  
1. Turn on your computer and start your operating system, if you have not  
already done so.  
2. Insert an audio CD into the CD-ROM drive.  
3. The CD begins playing. If the CD does not start playing, or if you have  
problems with the audio, check the documentation that comes with your  
audio adapter or computer for problem-solving information.  
Using a data CD  
Data CDs can contain data files, games, or applications.  
Windows 95, Windows 98, Windows NT 4.0, Windows 2000,  
or Windows Me  
To read a data CD do the following:  
1. Turn on your computer and start your operating system, if you have not  
already done so.  
Part 1: Installation and users guide 1-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Insert an data CD into the CD-ROM drive. Many program CDs will  
automatically start at this point. If the CD does not automatically start, go  
on to step 3.  
3. Double-click My Computer.  
4. Verify that the CD-ROM icon is displayed.  
5. Double-click the CD-ROM icon.  
6. Verify that you can view files on the CD.  
If you are unable to select the CD-ROM icon or view data, see Appendix B.  
informationon page C-1 for service information.  
1-12 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapitre 1 : Installation et utilisation  
L’unité de CD-ROM interne IDE 48X-20X d’IBM est capable de lire un disque  
compact (CD) contenant environ 680 Mo1 d’informations. Elle a été conçue  
pour s’installer dans un ordinateur personnel qui dispose de l’architecture IDE  
(integrated drive electronics) ou E-IDE (IDE améliorée).  
Cette unité de CD-ROM lit les données à une vitesse jusqu’à 48 fois supérieure  
à celle d’une unité de CD-ROM standard, en transférant jusqu’à 7200 ko2 par  
seconde. L’unité peut lire les disques compacts conformes aux standards  
ISO-9660 et High-Sierra Group (HSG). Elle peut également lire des disques  
multi-sessions à architecture étendue (XA), tels que les CD Photo Kodak.  
Description du produit  
Outre ce manuel, la boîte de l’option contient :  
v Une unité de CD-ROM interne IDE 48X/20X  
v Un câble audio en “Y”, un câble audio standard  
v Quatre vis de fixation (M3 x 5 mm, rainurées)  
v Un câble IDE servant à raccorder deux périphériques IDE  
v Un manuel relatif aux précautions d’utilisation du laser des unités de  
CD-ROM  
Prenez contact avec votre revendeur si l’un de ces éléments manque ou est  
endommagé. Vous pouvez être amené à fournir la preuve d’achat. Sa  
présentation est habituellement nécessaire pour faire jouer la garantie.  
Vous trouverez des informations sur la manière d’obtenir de l’aide, sur le  
support technique et sur les conditions de la garantie à l’annexe C, Help and  
service information, à la page C-1. Avant d’appeler le support technique,  
consultez l’annexe B, Problem solving, à la page B-1.  
1. Un Mo correspond approximativement à 1 000 000 octets en terme de capacité de stockage.  
2. Un ko représente environ 1024 octets en terme de vitesse de transfert de données.  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-13  
Avant de commencer  
Déterminez si votre ordinateur dispose des caractéristiques minimum requises ;  
consultez la section «Configuration système requise» pour plus de  
renseignements. Lisez les informations ci-après avant de commencer  
l’installation.  
Vous devez accomplir les opérations suivantes pour installer l’unité :  
1. Déterminez quel connecteur IDE utiliser et le paramètre de configuration  
correspondant.  
2. Placez ou déplacez le cavalier de configuration de l’unité (et  
éventuellement, modifiez aussi les cavaliers de configuration d’autres  
périphériques).  
Si vous ne comprenez pas ces opérations ou n’êtes pas certain de pouvoir  
effectuer toutes celles qui sont décrites, demandez à un technicien informatique  
qualifié d’installer l’unité de CD-ROM à votre place.  
Configuration système requise  
Avant de commencer l’installation de l’unité, vérifiez que votre ordinateur  
satisfait aux conditions système suivantes.  
v Microprocesseur : 80486 minimum  
v Mémoire vive : 4 Mo minimum  
v Unité de disquette 5 pouces 1/4  
v Connecteur IDE disponible  
v Connexion d’alimentation interne disponible  
v Baie d’unité disponible  
v Un des systèmes d’exploitation suivants :  
– Microsoft Windows 95  
– Microsoft Windows 98  
– Microsoft Windows NT 4.0  
– Microsoft Windows 2000 Professional  
– Microsoft Windows Millennium Edition (Me)  
1-14 48X-20X Internal IDE CD-ROM Drive: User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Précautions de manipulation  
Afin de protéger votre périphérique lors de l’installation, observez les  
consignes suivantes :  
v Manipulez l’unité avec précaution. Si vous heurtez ou laissez tomber l’unité,  
vous risquez d’endommager ses composants internes.  
v Conservez l’unité dans sa pochette antistatique jusqu’à ce vous soyez prêt à  
l’installer dans votre ordinateur. Limitez vos mouvements. Ceux-ci peuvent  
provoquer l’accumulation d’électricité statique.  
v Ne forcez pas en insérant le câble d’alimentation. Sinon, vous risquez  
d’endommager le connecteur ou l’unité.  
Vue de la face avant de l’unité  
Reportez-vous à l’illustration pour identifier les éléments qui sont mentionnés  
dans les instructions d’installation.  
«1¬Prise pour écouteurs. Branchez vos écouteurs sur cette sortie audio.  
«2¬Réglage du volume. Tournez cette molette pour régler le volume.  
«3¬Plateau du CD. Chargez un CD dans l’unité en le plaçant sur ce plateau.  
«4¬Voyant de fonctionnement. Il s’allume lorsque l’unité lit un CD de données  
ou joue un CD audio.  
«5¬Trou d’éjection manuelle. Utilisez-le pour éjecter le plateau du CD si le  
bouton Ejection/Chargement ne fonctionne pas correctement.  
«6¬Bouton Ejection/Chargement. Appuyez sur ce bouton pour ouvrir ou  
fermer le plateau du CD.  
Chapitre 1 : Installation et utilisation 1-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Vue de la face arrière de l’unité  
Reportez-vous à l’illustration pour identifier les éléments qui sont mentionnés  
dans les instructions d’installation.  
«1¬Réservé.  
«2¬Connecteur de sortie audio. Ce connecteur est utilisé pour raccorder l’unité  
de CD-ROM à une carte audio.  
«3¬Broches de configuration. Le positionnement du cavalier sur ces broches  
détermine la priorité de l’unité de CD-ROM sur le bus IDE.  
«4¬Connecteur IDE. Il sert à connecter l’unité de CD-ROM au câble IDE.  
«5¬Connecteur d’alimentation. Il permet de raccorder le cordon d’alimentation  
à l’unité de CD-ROM.  
Installation de l’unité  
Effectuez les opérations suivantes pour installer l’unité de CD-ROM dans votre  
ordinateur.  
Etape 1. Ouverture de l’ordinateur  
1. Mettez l’ordinateur hors tension, ainsi que tous les périphériques qui y sont  
connectés.  
2. Débranchez les cordons d’alimentation de l’ordinateur, ainsi que ceux de  
tous les périphériques connectés.  
3. Retirez le carter de l’ordinateur.  
1-16 48X-20X Internal IDE CD-ROM Drive: User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Etape 2. Déballage de l’unité  
1. Avant d’ouvrir la pochette antistatique dans laquelle l’unité est emballée,  
placez-la contre une surface en métal nu pendant au moins deux secondes.  
Ceci a pour effet de décharger l’électricité statique accumulée sur  
l’emballage et sur votre corps.  
2. Retirez l’unité de la pochette antistatique. S’il vous faut poser l’unité, placez  
la pochette antistatique sur une surface plane (un magazine, par exemple)  
et placez l’unité sur la pochette antistatique.  
Etape 3. Sélection du port IDE  
Les ordinateurs les plus récents comportent généralement deux ports IDE,  
chacun pouvant prendre en charge deux périphériques. Habituellement, le port  
IDE auquel votre unité de disque dur est connectée est le port IDE primaire.  
L’autre port IDE est le port secondaire. Le port IDE et le positionnement choisi  
pour le câble IDE déterminent la position du cavalier de configuration que  
vous utiliserez pour l’unité.  
v Si vous avez deux ports IDE, connectez l’unité de CD-ROM au port IDE  
secondaire de la carte principale ou de la carte IDE. Si l’unité de CD-ROM  
est le seul périphérique sur le port IDE secondaire, utilisez la position  
primaire. Si l’unité de CD-ROM est le deuxième périphérique connecté au  
port secondaire, utilisez la position secondaire.  
v Si vous devez connecter l’unité de CD-ROM au port IDE primaire (le même  
port que celui dédié à l’unité de disque dur ou à un autre périphérique  
rapide), utilisez la position secondaire pour l’unité de CD-ROM et la  
position primaire pour le périphérique plus rapide. Dans certaines  
circonstances, vous devrez changer le paramétrage de la configuration de  
l’unité de disque dur pour la placer sur maître-avec-présence-d’un-  
secondaire lorsque vous raccorderez un périphérique secondaire sur le même  
câble. Pour plus d’informations sur le paramétrage des cavaliers de  
configuration d’autres périphériques, reportez-vous à la documentation  
fournie avec votre ordinateur ou avec le périphérique concerné.  
v Certains ordinateurs non IBM supportent le paramétrage sélection-câble  
dans lequel la position du périphérique sur le câble détermine si ce  
périphérique est primaire ou secondaire. Consultez la documentation fournie  
avec votre ordinateur pour déterminer s’il supporte ce paramétrage.  
Chapitre 1 : Installation et utilisation 1-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Etape 4. Positionnement du cavalier de configuration  
L’illustration représente la position primaire «1¬, la position secondaire (ou  
esclave) «2¬ et la position sélection-câble «3¬. Configurez l’unité de CD-ROM  
en plaçant le cavalier sur le groupe de broches correspondant au paramétrage  
que vous avez choisi à l’étape 3. Voir «Etape 3. Sélection du port IDE» à la  
1-18 48X-20X Internal IDE CD-ROM Drive: User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v Si vous configurez l’unité de CD-ROM comme périphérique primaire,  
positionnez le cavalier sur la position maître «1¬ (c’est la position définie sur  
l’unité telle qu’elle est livrée). Si un deuxième périphérique est présent sur le  
port IDE, assurez-vous qu’il est configuré comme périphérique secondaire.  
v Si vous configurez l’unité de CD-ROM comme périphérique secondaire,  
positionnez le cavalier sur la position secondaire «2¬. Vérifiez que l’autre  
périphérique présent sur le port IDE est configuré comme périphérique  
primaire (ou comme maître-avec-présence-d’un-secondaire).  
v Si vous configurez l’unité de CD-ROM en mode sélection-câble, positionnez  
le cavalier sur la position sélection-câble «3¬. Si un autre périphérique est  
présent sur le port IDE, assurez-vous qu’il a aussi la configuration  
sélection-câble.  
Etape 5. Montage de l’unité dans la baie  
Avertissement : Vérifiez que vous utilisez bien les vis de fixation M3 x 5 mm  
fournies dans la boîte. L’utilisation de vis trop longues risque d’endommager  
l’unité.  
Vous pouvez monter l’unité de CD-ROM horizontalement ou verticalement  
dans l’ordinateur. Si vous montez l’unité verticalement, vous devrez  
positionner le CD en le verrouillant dans l’unité de CD-ROM avant de fermer  
le plateau, sinon la lecture ne s’effectuera pas. Pour plus de détails sur la façon  
de placer de manière adéquate vos CD dans une unité montée verticalement,  
1. Glissez l’unité à l’intérieur de la baie. Votre ordinateur peut nécessiter des  
procédures spécifiques pour l’installation de périphériques de stockage.  
Consultez la documentation fournie avec votre ordinateur pour plus de  
renseignements.  
2. Alignez les trous de vis de la baie avec les trous filetés du boîtier de l’unité  
ou de l’étrier de fixation, puis serrez légèrement les vis afin de vérifier leurs  
positions. Habituellement, on utilise deux vis de chaque côté.  
3. Vérifiez que l’alignement est correct, puis serrez un peu plus les vis afin  
d’immobiliser l’unité. Ne les serrez pas trop fort.  
Chapitre 1 : Installation et utilisation 1-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Etape 6. Raccordement des câbles à l’unité  
Raccordez les câbles à l’unité de CD-ROM comme suit.  
1. Si vous disposez d’une carte son, examinez les câbles audio fournis et  
déterminez celui qui s’adapte le mieux au port d’entrée CD audio de votre  
carte son. Raccordez l’une des extrémités du câble audio choisi au  
connecteur de sortie audio de l’unité «1¬, et l’autre extrémité du câble au  
port d’entrée CD audio de votre carte son. Conservez l’autre câble au cas  
où vous utiliseriez une carte son différente à l’avenir.  
2. Raccordez le connecteur à 40 broches du câble IDE «2¬au connecteur IDE  
de l’unité. Alignez le câble de sorte que le bord repéré par une couleur se  
trouve près du connecteur du cordon d’alimentation «3¬. Utilisez le câble  
IDE livré avec ce produit si aucun câble n’est déjà raccordé au port IDE ou  
s’il n’y a qu’un seul connecteur de périphérique sur le câble IDE.  
3. Raccordez un câble d’alimentation à quatre broches «3¬ au connecteur  
d’alimentation du périphérique.  
Etape 7. Achèvement de l’installation matérielle  
1. Vérifiez que l’unité est maintenue solidement et que les connecteurs sont  
enfoncés correctement.  
2. Vérifiez que les câbles ne gênent pas la fermeture du carter de l’ordinateur  
et ne bloquent pas les pales du ventilateur de l’alimentation ou les grilles  
d’aération.  
3. Réinstallez le carter de l’ordinateur.  
4. Raccordez tous les périphériques et vérifiez qu’aucun autre dispositif, tel  
que le clavier, la souris ou l’écran n’a été malencontreusement déconnecté.  
5. Raccordez tous les cordons d’alimentation à leur prise de courant.  
1-20 48X-20X Internal IDE CD-ROM Drive: User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Etape 8. Mise à jour de la configuration de votre ordinateur  
Après avoir terminé l’installation matérielle, redémarrez votre ordinateur.  
Généralement, l’écran de configuration apparaît. Si ce n’est pas le cas,  
consultez la documentation de votre ordinateur pour savoir comment accéder à  
l’utilitaire de configuration.  
Pour examiner les informations de configuration sur la plupart des ordinateurs  
IBM, appuyez sur la touche F1 au moment du démarrage. Lorsque vous avez  
terminé, enregistrez les modifications et quittez l’utilitaire de configuration.  
Remarque : Certains anciens ordinateurs ne comportant qu’un seul port IDE  
peuvent ne pas afficher d’informations sur l’unité de CD-ROM  
lorsque vous affichez les informations de configuration. Vous  
pouvez malgré tout utiliser l’unité de CD-ROM dans ce cas si  
vous avez correctement effectué son installation.  
Etape 9. Installation des pilotes de périphérique  
Cette section contient les instructions d’installation des pilotes de périphérique  
de l’unité de CD-ROM, selon le système d’exploitation que vous utilisez.  
Remarque : Les besoins varient selon l’utilisateur ; les paramètres du pilote de  
périphérique peuvent être personnalisés en fonction du système  
d’exploitation employé. Si votre ordinateur ne fonctionne pas  
correctement avec les paramètres par défaut indiqués dans les  
instructions d’installation de cette section, consultez l’annexe A,  
Customizing device driver configuration settings, à la page A-1  
pour savoir comment personnaliser les paramètres de  
configuration de votre pilote de périphérique.  
Pilotes de périphérique pour Windows 95, Windows 98, Windows  
NT, Windows 2000 et Windows Me  
Windows 98 et Windows Me détectent automatiquement l’unité de CD-ROM et  
n’affichent pas d’écran d’installation. Si l’écran d’installation des pilotes  
apparaît après le démarrage de votre système d’exploitation, suivez les  
instructions affichées à l’écran pour installer les pilotes de l’unité. Consultez la  
documentation fournie avec votre système d’exploitation pour plus  
d’informations.  
Chapitre 1 : Installation et utilisation 1-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Précautions d’utilisation  
Cette section comporte des renseignements sur la manière adéquate de  
manipuler les CD et d’utiliser votre unité de CD-ROM.  
Manipulation des CD  
Les CD sont des supports haute densité qui doivent être manipulés avec  
précaution et ne pas être salis afin de rester lisibles. Ces précautions vous  
permettront de prolonger la vie de vos CD.  
Avertissement : Evitez de nettoyer les CD en effectuant un mouvement  
circulaire, ce qui risque d’entraîner une perte de données.  
v Tenez les CD par le bord ou par leur trou central. Ne touchez pas la surface  
des CD.  
v Pour retirer de la poussière ou des traces de doigts, nettoyez le CD à partir  
du centre en allant vers les bords avec un chiffon doux non pelucheux.  
v N’écrivez pas sur la surface.  
v Ne placez pas les CD sous la lumière directe du soleil.  
v N’utilisez pas de produits du commerce pour nettoyer vos CD.  
v Ne pliez pas les CD.  
Précautions d’utilisation de l’unité de CD-ROM  
Pour protéger votre unité de CD-ROM en fonctionnement, observez les  
précautions suivantes.  
v Retirez le CD présent dans l’unité avant de déplacer cette dernière.  
v N’insérez pas d’objets étrangers dans l’unité.  
v Ne retirez pas le couvercle et ne tentez pas de réparer vous-même l’unité.  
1-22 48X-20X Internal IDE CD-ROM Drive: User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v Ne faites pas fonctionner l’unité dans l’une des situations suivantes :  
Température élevée, fort degré d’hygrométrie ou exposition directe aux  
rayons du soleil  
– Vibration excessive, choc violent ou surface inclinée  
– Environnement très poussiéreux  
Chargement d’un CD  
Pour charger un CD dans une unité de CD-ROM montée horizontalement,  
procédez comme suit :  
1. Appuyez sur le bouton Ejection/Chargement. Le plateau sort de l’unité.  
2. Posez le CD sur le plateau de chargement en positionnant son étiquette  
vers le haut.  
3. Fermez le plateau de chargement en appuyant sur le bouton  
Ejection/Chargement, ou en repoussant doucement le plateau.  
Avertissement : Ne tentez pas de forcer l’ouverture du plateau ; ne placez  
pas d’objets étrangers sur le plateau.  
Chapitre 1 : Installation et utilisation 1-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Pour charger un CD dans une unité de CD-ROM montée verticalement,  
procédez comme suit :  
1. Appuyez sur le bouton Ejection/Chargement.  
2. Examinez les illustrations et comparez-les avec votre plateau de  
chargement.  
v Si votre plateau de chargement ressemble à celui de l’illustration de  
gauche, insérez le CD avec précaution de sorte que les bords du CD  
soient logés sous les ergots du plateau de chargement. Ces ergots en  
plastique bloquent les bords du CD et le maintiennent en place. Les  
ergots sont fixés au plateau et ne peuvent pas être retirés.  
v Si votre plateau de chargement ressemble à celui de l’illustration de  
droite, insérez le CD dans le plateau et poussez doucement la languette  
mobile vers l’avant pour maintenir le CD en place.  
3. Fermez le plateau de chargement en appuyant sur le bouton  
Ejection/Chargement, ou en repoussant doucement le plateau.  
1-24 48X-20X Internal IDE CD-ROM Drive: User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ejection manuelle d’un CD  
Si vous appuyez sur le bouton Ejection/Chargement et que le plateau ne sort  
pas, éteignez l’ordinateur. Dépliez un grand trombone, comme le montre  
l’illustration ci-dessous. L’extrémité dépliée doit s’étendre sur au moins 45 mm.  
Insérez l’extrémité dépliée dans le trou d’éjection manuelle situé sur la face  
avant de l’unité (voir «Vue de la face avant de l’unité» à la page 1-15). Poussez  
le trombone dans le trou jusqu’à ce que le plateau s’ouvre. Tirez doucement le  
plateau vers vous jusqu’à ce que vous puissiez retirer le CD.  
45 mm  
1.8 in  
Lecture d’un CD audio  
Pour pouvoir lire un CD audio, vous devez disposer d’un programme de  
lecture de CD audio sur votre ordinateur. Parmi les applications fournies avec  
Windows 98, Windows Me, Windows NT et Windows 2000 se trouvent des  
programmes de lecture de CD audio.  
Pour plus d’informations sur l’utilisation de votre logiciel de lecture de CD  
audio, consultez la documentation fournie avec votre système d’exploitation ou  
votre ordinateur.  
Windows 95, Windows 98, Windows NT 4.0, Windows 2000  
ou Windows Me  
Pour faire fonctionner l’utilitaire audio, procédez comme suit :  
1. Mettez votre ordinateur sous tension et démarrez votre système  
d’exploitation, si ce n’est pas déjà fait.  
2. Insérez un CD audio dans l’unité de CD-ROM.  
3. La lecture du CD commence. Si le CD n’est pas lu ou si vous avez des  
problèmes avec la reproduction audio, consultez la documentation fournie  
avec votre carte son ou votre ordinateur pour obtenir des informations sur  
la manière de remédier à ce problème.  
Chapitre 1 : Installation et utilisation 1-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Utilisation d’un CD de données  
Les CD de données peuvent contenir des fichiers de données, des jeux ou des  
applications.  
Windows 95, Windows 98, Windows NT 4.0, Windows 2000  
ou Windows Me  
Pour lire un CD de données, procédez comme suit :  
1. Mettez votre ordinateur sous tension et démarrez votre système  
d’exploitation, si ce n’est pas déjà fait.  
2. Insérez un CD de données dans l’unité de CD-ROM. De nombreux CD de  
logiciels démarrent automatiquement à ce moment. Si le CD ne démarre  
pas automatiquement, passez à l’étape 3.  
3. Cliquez deux fois sur Poste de travail.  
4. Vérifiez que l’icône du CD-ROM est affichée.  
5. Cliquez deux fois sur l’icône du CD-ROM.  
6. Vérifiez que la liste des fichiers présents sur le CD apparaît.  
Si vous ne pouvez pas sélectionner l’icône du CD-ROM ou afficher les fichiers  
qu’il renferme, consultez l’annexe B, Problem solving, à la page B-1 ou  
reportez-vous à l’annexe C, Help and service information, à la page C-1 pour  
des informations de dépannage.  
1-26 48X-20X Internal IDE CD-ROM Drive: User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parte 1: Instalación y guía del usuario  
La unidad de CD ROM IBM® IDE interna 48X-20X puede leer un disco  
1
compacto (CD) que contenga aproximadamente 680 MB . Está diseñada para  
su instalación en un PC que utilice la electrónica de unidades integradas (IDE)  
o la arquitectura IDE mejorada.  
El dispositivo de CD ROM distribuye los datos a una velocidad de hasta 48  
2
veces la de un CD ROM normal, enviando datos a hasta 7200 KB . La unidad  
puede leer los discos compactos que se ajustan a los estándares ISO-9660 y  
High-Sierra Group (HSG). También lee discos multisesión y arquitectura  
ampliada (XA) como, por ejemplo, los CD de fotografías de Kodak.  
Descripción del producto  
Además de este manual, el paquete opcional incluye:  
v Una unidad de CD ROM IDE interna 48X-20X  
v Un cable de audio “Y”, un cable de audio  
v Cuatro tornillos de montaje (M3 x 5 mm, con ranura)  
v Un cable IDE para conectar dos dispositivos IDE  
v La guía de seguridad láser para las unidades de CD ROM  
Póngase en contacto con el punto de venta si falta algún artículo o si está  
dañado. Asegúrese de guardar la prueba de compra. Es posible que la necesite  
para recibir el servicio de garantía.  
Puede obtener información acerca de cómo obtener ayuda, soporte técnico y  
servicio de garantía en el “Apéndice C. Help and service information” en la  
página C-1. Antes de llamar al soporte técnico, consulte “Apéndice B.  
Resolución de problemas” en la página B-1.  
Antes de empezar  
Determine si el sistema satisface los requisitos mínimos; consulte el apartado  
“Requisitos del sistema” en la página 1-28 para obtener más detalles. Lea la  
información siguiente antes de empezar con la instalación.  
Debe realizar los pasos siguientes para instalar la unidad:  
1. Un MB representa aproximadamente 1 000 000 de bytes en cuanto a la capacidad de  
almacenamiento de la información.  
2. Un KB representa aproximadamente 1024 bytes en cuanto a la velocidad de transferencia de datos  
por segundo.  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-27  
1. Determine el conector IDE que debe utilizar y los valores de configuración  
correspondientes.  
2. Coloque el puente de configuración en la unidad o cámbielo (y  
posiblemente realice modificaciones en los puentes de configuración de los  
otros dispositivos).  
Si no entiende estos procedimientos o no está seguro de su habilidad para  
realizar todos los procedimientos descritos, deje que un técnico cualificado en  
informática instale el CD ROM.  
Requisitos del sistema  
Antes de empezar a instalar la unidad, asegúrese de que el sistema satisface  
los requisitos siguientes.  
v Microprocesador mínimo: 80486  
v RAM mínima: 4 MB  
v Unidad de disquetes de 5,25 pulgadas  
v Conexión a IDE disponible  
v Conexión a alimentación interna disponible  
v Bahía de unidad disponible  
v Uno de los sistemas operativos siguientes:  
®
– Microsoft Windows® 95  
®
– Microsoft Windows 98  
– Microsoft® Windows NT® 4.0  
– Microsoft Windows 2000 Professional  
– Microsoft Windows Millennium Edition (Me)  
Instrucciones de manipulación  
Para proteger el dispositivo durante la instalación, observe las precauciones  
siguientes:  
v Manipule la unidad con cuidado. Si la unidad sufre golpes o caídas, los  
componentes del interior del alojamiento de la unidad pueden resultar  
dañados.  
v Guarde el dispositivo en la bolsa antiestática hasta que esté preparado para  
instalar la unidad en el sistema. Limite sus movimientos. El movimiento  
puede hacer que se cree electricidad estática.  
v No fuerce la inserción del cable de alimentación. Si lo hace, podría dañar el  
conector o la unidad.  
1-28 Unidad de CD ROM IDE interna 48X-20X: Guía del usuario  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Vista frontal de la unidad  
Consulte la ilustración para identificar las piezas a las que las instrucciones de  
instalación pueden hacer referencia.  
«1¬Conector de auriculares. Conecte los auriculares aquí para la salida de  
audio.  
«2¬Control de volumen. Ajuste este botón para controlar el volumen.  
«3¬Bandeja del CD. Utilice la bandeja del CD para cargar un CD en la unidad.  
«4¬Indicador de Ocupado. Esta luz se enciende cuando la unidad lee un CD  
de datos o reproduce un CD de audio.  
«5¬Orificio para la expulsión manual. Utilícelo para expulsar la bandeja del  
CD si el botón de ejecución/carga no funciona correctamente.  
«6¬Botón de ejecución/carga. Pulse este botón para abrir o cerrar la bandeja  
del CD.  
Vista posterior de la unidad  
Consulte la ilustración para identificar las piezas a las que las instrucciones de  
instalación pueden hacer referencia.  
«1¬Reservado.  
«2¬Conector de salida de audio. Este conector se utiliza para conectar la  
unidad de CD ROM a un adaptador de audio.  
Parte 1: Instalación y guía del usuario 1-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
«3¬Pins de configuración. La colocación del puente sobre estos pins determina  
la prioridad de la unidad de CD ROM en el bus IDE.  
«4¬Conector IDE. Se utiliza para conectar la unidad de CD ROM al cable IDE.  
«5¬Conector de corriente continua. Se utiliza para conectar el cable de  
corriente continua a la unidad de CD ROM.  
Instalación de la unidad  
Siga estos pasos para instalar la unidad de CD ROM en el sistema.  
Paso 1. Apertura del sistema  
1. Apague el sistema y todos los dispositivos conectados.  
2. Desenchufe los cables de alimentación del sistema y de todos los  
dispositivos conectados.  
3. Extraiga la cubierta del sistema.  
Paso 2. Desembalaje de la unidad  
1. Antes de abrir la bolsa antiestática en la que la unidad está embalada,  
acérquela a una superficie de metal sin pintar durante dos segundos como  
mínimo. Esto atraerá la electricidad estática del paquete y de su cuerpo.  
2. Extraiga la unidad de la bolsa antiestática. Si debe colocar la unidad hacia  
abajo, coloque la bolsa antiestática en una superficie plana acolchada como,  
por ejemplo, una revista, y coloque la unidad sobre la bolsa antiestática.  
Paso 3. Selección del puerto IDE  
Los sistemas nuevos suelen tener dos puertos IDE, a cada uno de los cuales  
pueden conectarse dos dispositivos. Generalmente, el puerto IDE al que está  
conectada la unidad de disco duro es el puerto IDE primario. El otro puerto  
IDE es el puerto secundario. El puerto IDE y la posición del cable que  
seleccione determinarán el valor del puerto de configuración que deberá  
utilizar para la unidad.  
v Si tiene dos puertos IDE, conecte la unidad de CD ROM al puerto IDE  
secundario de la placa del sistema o del adaptador IDE. Si la unidad de CD  
ROM es el único dispositivo del puerto IDE secundario, utilice el valor de  
configuración primario. Si la unidad de CD ROM es el segundo dispositivo  
del puerto secundario, utilice el valor de configuración secundario.  
v Si debe conectar la unidad de CD ROM al puerto IDE primario (el mismo  
puerto que la unidad de disco duro o algún otro dispositivo rápido), utilice  
el valor secundario para la unidad de CD ROM y el valor primario para el  
dispositivo rápido. En algunos casos, es posible que necesite cambiar el valor  
de configuración de la unidad de disco duro a maestro con secundario  
presente al conectar un dispositivo secundario al mismo cable. Para obtener  
1-30 Unidad de CD ROM IDE interna 48X-20X: Guía del usuario  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
más información sobre cómo definir los puentes de configuración de otros  
dispositivos, consulte la documentación que acompaña al sistema o al  
dispositivo en cuestión.  
v Algunos sistemas que no son de IBM proporcionan soporte al valor de  
selección de cable, donde la posición del dispositivo en el cable determina si  
un dispositivo es primario o secundario. Consulte la documentación que  
acompaña al sistema para determinar si proporciona soporte a este valor.  
Paso 4. Definición del puente de configuración  
La ilustración muestra el valor primario «1¬, el valor secundario (o esclavo)  
«2¬ y el valor de selección de cable «3¬. Configure la unidad de CD ROM  
colocando el puente sobre el conjunto de pins correspondientes al valor que  
haya seleccionado en el paso 3. Consulte el apartado “Paso 3. Selección del  
v Si está configurando el dispositivo de CD ROM como primario, defina el  
puente en el valor de dispositivo maestro «1¬. (Así es como está configurada  
la unidad cuando se envía). Si hay un segundo dispositivo en el puerto IDE,  
asegúrese de que esté configurado como secundario.  
v Si está configurando el dispositivo de CD ROM como secundario, defina el  
puente en el valor de dispositivo secundario «2¬. Asegúrese de que el otro  
dispositivo del puerto IDE esté configurado como primario (o primario con  
secundario presente).  
v Si está configurando el dispositivo de CD ROM como selección de cable,  
defina el puente en el valor de dispositivo «3¬ de selección de cable. Si hay  
otro dispositivo en el puerto IDE, asegúrese de que el dispositivo secundario  
también esté configurado para selección de cable.  
Paso 5. Montaje de la unidad en la bahía  
Atención: Asegúrese de utilizar el tornillo de montaje M3 x5 mm del paquete  
opcional. Si utiliza tornillos demasiados largos, la unidad podría dañarse.  
Puede montar la unidad de CD ROM horizontal o verticalmente en el sistema.  
Si monta la unidad verticalmente, debe fijar los CD que coloque en la unidad  
antes de cerrar la bandeja de la unidad ya que, si no, la unidad no podrá leer  
Parte 1: Instalación y guía del usuario 1-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
el CD correctamente. Para obtener instrucciones acerca de cómo asegurar los  
CD en una unidad montada verticalmente, consulte el apartado “Carga de un  
1. Deslice la unidad dentro de la bahía. Es posible que el sistema necesite  
procedimientos específicos para instalar dispositivos de almacenamiento.  
Consulte la documentación que acompaña al sistema para obtener más  
información.  
2. Alinee los orificios para los tornillos de la bahía de la unidad con los  
orificios perforados en el alojamiento de la unidad o en la pieza de sujeción  
de montaje; a continuación, pase los tornillos sin apretarlos para comprobar  
su posición. Normalmente se utilizan dos tornillos en cada lado.  
3. Compruebe que la alineación sea correcta; a continuación, apriete los  
tornillos para que la unidad quede fijada. No apriete demasiado.  
Paso 6. Conexión de los cables a la unidad  
Conecte los cables a la unidad de CD ROM de la forma siguiente:  
1. Si tiene un adaptador de audio, busque los cables de audio incluidos y  
determine qué cable se ajusta mejor al puerto de entrada de CD del  
adaptador de audio. Conecte un extremo del cable de audio seleccionado al  
conector de salida de audio del dispositivo «1¬ y el otro extremo al puerto  
de entrada de audio del CD del adaptador de audio. Guarde el otro cable  
por si utiliza un adaptador de audio distinto en el futuro.  
2. Conecte un conector de cable IDE de 40 pins «2¬ al conector IDE de la  
unidad. Alinee el cable de forma que el lado con códigos de color quede  
más cerca del conector del cable de alimentación «3¬. Utilice el cable IDE  
que se proporciona con esta opción si no hay ningún cable conectado al  
puerto IDE o si sólo hay un conector de dispositivos en el cable IDE.  
3. Conecte un cable de alimentación de 4 pins «3¬ al conector de corriente  
continua del dispositivo.  
1-32 Unidad de CD ROM IDE interna 48X-20X: Guía del usuario  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Paso 7. Finalización de la instalación del hardware  
1. Asegúrese de que la unidad esté montada de forma segura y de que los  
conectores estén conectados firmemente.  
2. Asegúrese de que los cables no interfieran con la cubierta del sistema y no  
bloqueen las palas del ventilador de la fuente de alimentación ni las vías de  
entrada y salida de aire.  
3. Vuelva a instalar la cubierta del sistema.  
4. Conecte todos los dispositivos de nuevo y compruebe si se ha desconectado  
algún dispositivo como el teclado, el ratón o el monitor.  
5. Conecte todos los cables de alimentación a tomas de corriente.  
Paso 8. Actualización de la configuración del sistema  
Una vez finalizada la instalación del hardware, vuelva a arrancar el sistema.  
Normalmente se visualiza la pantalla de información de configuración. Si no se  
visualiza esta pantalla, busque información en la documentación del sistema  
acerca de cómo acceder al programa de configuración.  
Para ver la información de configuración de la mayor parte de sistemas IBM,  
pulse el botón F1 durante el arranque. Cuando haya terminado de revisar la  
información, guarde los cambios y salga.  
Nota: Es posible que algunos sistemas más antiguos con un puerto IDE no  
muestren la información de la unidad de CD ROM cuando repase la  
información de configuración. En este caso, todavía puede utilizar la  
unidad de CD ROM si ha completado la instalación correctamente.  
Paso 9. Instalación de los controladores de dispositivos  
Este apartado contiene las instrucciones para instalar controladores de  
dispositivos para la unidad de CD ROM, según el sistema operativo que  
utilice.  
Nota: Los requisitos del usuario varían; los valores de los controladores de  
dispositivos para el sistema operativo no pueden personalizarse. Si el  
sistema no funciona bien con los valores por omisión proporcionados en  
las instrucciones de instalación de este apartado, consulte el  
“Apéndice A. Personalización de los valores de configuración de los  
controladores de dispositivos” en la página A-1 para obtener  
información sobre cómo personalizar los valores de configuración de los  
controladores de dispositivos.  
Controlador de dispositivo para Windows 95, Windows 98,  
Windows NT, Windows 2000 y Windows Me  
Windows 98 y Windows Me detectan de forma automática la unidad de CD  
ROM y no muestran ninguna pantalla de instalación. Si se visualizan las  
pantallas de instalación después de arrancar el sistema operativo, siga las  
Parte 1: Instalación y guía del usuario 1-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
instrucciones de la pantalla para instalar los controladores de dispositivos.  
Consulte la documentación que acompaña al sistema operativo para obtener  
más información.  
Utilización y cuidado de la unidad  
Este apartado incluye instrucciones para el cuidado adecuado de los CD y del  
funcionamiento de la unidad de CD ROM.  
Cuidado de un CD  
Los CD son soportes de alta densidad que deben manipularse con cuidado y  
mantenerse limpios para garantizar que continúen siendo legibles. Estas  
precauciones le ayudarán a prolongar la vida de los CD.  
Atención: Si limpia un CD utilizando un movimiento circular puede  
producirse una pérdida de datos.  
v Aguante el CD por el borde o por el orificio central. No toque la superficie  
de los datos del CD.  
v Para eliminar polvo o huellas, limpie el CD desde el centro hacia el borde  
con un trapo suave que no deje hilos.  
v No escriba sobre la superficie.  
v No coloque el CD bajo la luz directa del sol.  
v No utilice limpiadores comerciales para limpiar el CD.  
v No doble el CD.  
Cuidado de la unidad de CD ROM  
Para proteger la unidad de CD ROM durante su funcionamiento, observe las  
precauciones siguientes.  
v Extraiga un CD de la unidad antes de moverla.  
1-34 Unidad de CD ROM IDE interna 48X-20X: Guía del usuario  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v No inserte objetos extraños en la unidad.  
v No extraiga la cubierta de la unidad ni intente repararla.  
v No haga funcionar la unidad en las condiciones siguientes:  
– Altas temperaturas, mucha humedad o luz directa del sol  
– Vibraciones excesivas, sacudidas súbitas o superficies inclinadas  
– Polvo excesivo  
Carga de un CD  
Para cargar un CD en una unidad de CD ROM montada horizontalmente,  
realice los pasos siguientes:  
1. Pulse el botón de expulsión/carga. La bandeja se desliza fuera de la  
unidad.  
2. Inserte el CD en la bandeja de carga con la etiqueta hacia arriba.  
3. Cierre la bandeja de carga pulsando el botón de expulsión/carga o  
empujando la bandeja hacia dentro con suavidad.  
Atención: No fuerce la bandeja para abrirla; no inserte objetos extraños en la  
bandeja del CD.  
Parte 1: Instalación y guía del usuario 1-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Para cargar un CD en una unidad de CD ROM montada verticalmente, realice  
los pasos siguientes:  
1. Pulse el botón de expulsión/carga.  
2. Mire las ilustraciones y compárelas con la bandeja de carga.  
v Si la bandeja de carga se parece a la ilustración de la izquierda, inserte el  
CD con cuidado de forma que los bordes del CD queden por debajo de  
las lengüetas de la bandeja de carga. Estas lengüetas de plástico recubren  
los bordes del CD y lo mantienen en su sitio. Las lengüetas están sujetas  
a la propia bandeja y no pueden moverse.  
v Si la bandeja de carga se parece a la ilustración de la derecha, inserte el  
CD en la bandeja y empuje la lengüeta móvil con suavidad hacia fuera  
para que mantener el CD en su lugar.  
3. Cierre la bandeja de carga pulsando el botón de expulsión/carga o  
empujando la bandeja hacia dentro con suavidad.  
1-36 Unidad de CD ROM IDE interna 48X-20X: Guía del usuario  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Expulsión de un CD manualmente  
Si pulsa el botón de expulsión/carga y la bandeja no se desliza hacia fuera,  
apague el sistema. Enderece un clip grande para formar una herramienta,  
como se muestra en la ilustración siguiente. El extremo enderezado debe tener  
por lo menos 45 mm (1,8). Inserte el extremo enderezado en el orificio de  
expulsión manual de la parte frontal de la unidad (consulte el apartado “Vista  
frontal de la unidad” en la página 1-29). Vaya introduciendo el clip en el orificio  
hasta que se abra la bandeja. Estire la bandeja hacia fuera con suavidad hasta  
que pueda extraer el CD.  
Reproducción de un CD de audio  
Para reproducir un CD de audio, debe tener instalado un programa de audio  
en el sistema. Entre las aplicaciones de Windows 98, Windows Me, Windows  
NT y Windows 2000 se incluyen programas de reproducción de CD de audio.  
Para obtener más información acerca de cómo utilizar el software para la  
reproducción del audio, consulte la documentación que se incluye con el  
sistema operativo o con el sistema.  
Windows 95, Windows 98, Windows NT 4.0, Windows 2000 o  
Windows Me  
Para utilizar el programa de utilidad de audio, realice los pasos siguientes:  
1. Encienda el sistema y arranque el sistema operativo si todavía no lo ha  
hecho.  
2. Inserte un CD de audio en la unidad de CD ROM.  
3. El CD se empezará a oir. Si el CD no empieza a oirse o si tiene problemas  
con el audio, compruebe la documentación que acompaña al adaptador de  
audio o al sistema para obtener información sobre la resolución de  
problemas.  
Utilización de un CD de datos  
Los CD de datos pueden contener archivos, juegos o aplicaciones.  
Windows 95, Windows 98, Windows NT 4.0, Windows 2000 o  
Windows Me  
Para leer un CD de datos, realice los pasos siguientes:  
Parte 1: Instalación y guía del usuario 1-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Encienda el sistema y arranque el sistema operativo si todavía no lo ha  
hecho.  
2. Inserte un CD de datos en la unidad de CD ROM. Muchos CD de  
programas empezarán de forma automática en este momento. Si el CD no  
empieza automáticamente, vaya al paso 3.  
3. Pulse dos veces el botón sobre Mi PC.  
4. Verifique que se visualice el icono de CD ROM.  
5. Pulse dos veces el botón sobre el icono CD ROM.  
6. Verifique que puede ver los archivos del CD.  
Si no puede seleccionar el icono de CD ROM o ver los datos, consulte el  
“Apéndice B. Resolución de problemas” en la página B-1 o el “Apéndice C.  
Help and service information” en la página C-1 para obtener información sobre  
cómo repararlo.  
1-38 Unidad de CD ROM IDE interna 48X-20X: Guía del usuario  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parte 1: Guida per l’utente e all’installazione  
L’unità CD-ROM con IDE interno IBM®48X-20X è in grado di leggere un CD  
(compact disc) che contiene circa 680 MB1 di informazioni. Essa è designata per  
l’installazione relativa ad un elaboratore che utilizza la struttura IDE  
(integrated drive electronics) o EIDE (enhanced IDE).  
L’unità CD-ROM distribuisce i dati sino a 48 volte rispetto alla velocità del  
CD-ROM standard, distribuendo i dati sino a 7200 KB2 al secondo. L’unità  
legge i CD che soddisfano gli standard ISO-9660 e HSG (High-Sierra Group).  
Legge anche sessioni multiple, i dischi con struttura estesa (XA), come i CD  
fotografici Kodak.  
Descrizione del prodotto  
Oltre a questo manuale, il pacchetto di opzioni include:  
v Unità CD-ROM con IDE interno 48X-20X  
v Un cavo audio “Y”, un cavo audio  
v Quattro viti di fissaggio (M3 x 5 mm)  
v Un cavo IDE per la connessione di due unità IDE  
v Guida relativa alla sicurezza del laser per le unità CD-ROM  
Se un componente è mancante o danneggiato, contattare il punto di vendita.  
Conservare la ricevuta di acquisto. E’ possibile usufruire della garanzia.  
E’ possibile rilevare le informazioni relative all’assistenza tecnica, al supporto  
tecnico e alla garanzia nella sezione “Appendice C. Informazioni sull’assistenza  
tecnica” a pagina C-1. Prima di contattare l’assistenza tecnica, consultare la  
sezione “Appendice B. Risoluzione dei problemi” a pagina B-1.  
Prima di iniziare  
Determinare se l’elaboratore soddisfi i requisiti minimi; per le informazioni  
dettagliate, consultare la sezione “Requisiti del sistema” a pagina 1-40. Prima di  
avviare l’installazione, leggere le seguenti informazioni.  
E’ necessario completare la seguente procedura per installare l’unità:  
1. Determinare il connettore IDE da utilizzare e l’impostazione della  
configurazione corrispondente.  
1. MB equivale circa 1 000 000 byte relativa alla capacità della memoria.  
2. KB equivale circa 1024 byte relativi alle velocità di trasferimento dati.  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-39  
2. Posizionare o modificare il cavallotto di configurazione dell’unità (e  
possibilmente apportare le modifiche ai cavallotti di configurazione di altre  
unità).  
Se tali procedure non sono state comprese oppure l’utente non è sicuro della  
propria abilità nell’eseguire tutte le procedure descritte, rivolgersi ad un tecnico  
qualificato per installare l’unità CD-ROM.  
Requisiti del sistema  
Prima di installare l’unità, verificare che l’elaboratore soddisfi i seguenti  
requisiti del sistema.  
v Microprocessore minimo: 80486  
v Memoria RAM minima: 4 MB  
v Unità minidisco da 5,25  
v Connessione IDE disponibile  
v Connessione di alimentazione interna disponibile  
v Vano dell’unità disponibile  
v Uno dei seguenti sistemi operativi:  
®
– Microsoft Windows® 95  
®
– Microsoft Windows 98  
– Microsoft® Windows NT® 4.0  
– Microsoft Windows 2000 Professional  
– Microsoft Windows Me (Millennium Edition)  
Gestione delle istruzioni  
Durante l’installazione, per proteggere l’unità, osservare le seguenti  
precauzioni:  
v Maneggiare l’unità con cura. Il trasporto o la caduta dell’unità può  
danneggiare i componenti interni.  
v Conservare l’unità in un involucro di protezione da elettricità statica fino a  
quando si desidera installarla nell’elaboratore. Limitare i propri movimenti.  
Il movimento può generare elettricità statica.  
v Non forzare l’inserimento dei cavi di alimentazione. Operando in questo  
modo, è possibile danneggiare il connettore o l’unità.  
1-40 Unità CD-ROM con IDE interno 48X-20X: Guida per l’utente  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Vista anteriore dell’unità  
Per individuare le parti che potrebbero fare riferimento alle istruzioni  
sull’installazione, consultare l’illustrazione.  
«1¬Connettore per cuffie. Per l’emissione audio, collegare le cuffie in questo  
punto.  
«2¬Controllo del volume. Regolare questa finestra per il controllo di volume.  
«3¬Vassoio CD. Utilizzare il vassoio del CD per caricare un CD nell’unità.  
«4¬Indicatore di segnale occupato. Questo indicatore si accende quando l’unità  
legge un CD di dati o riproduce un CD audio.  
«5¬Foro di espulsione manuale. Utilizzare tale foro per espellere il vassoio del  
CD nel caso in cui il pulsante di caricamento/espulsione non funziona  
correttamente.  
«6¬Pulsante di caricamento/espulsione. Premere tale pulsante per aprire o  
chiudere il vassoio del CD.  
Vista posteriore dell’unità  
Per individuare le parti che potrebbero fare riferimento alle istruzioni  
sull’installazione, consultare l’illustrazione.  
«1¬Riservato.  
«2¬Connettore di emissione audio. Questo connettore viene utilizzato per  
collegare l’unità CD-ROM ad un adattatore audio.  
Parte 1: Guida per l’utente e all’installazione 1-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
«3¬Piedini di configurazione. La posizione del cavallotto su questi piedini  
determina la priorità dell’unità CD-ROM sul bus IDE.  
«4¬Connettore IDE. Questo connettore viene utilizzato per collegare l’unità  
CD-ROM al cavo IDE.  
«5¬Connettore di alimentazione DC. Tale connettore viene utilizzato per  
collegare il cavo di alimentazione dc all’unità CD-ROM.  
Installazione dell’unità  
Per installare l’unità CD-ROM, seguire tale procedura.  
Passo 1. Apertura dell’elaboratore  
1. Spegnere l’elaboratore e tutte le unità collegate.  
2. Scollegare i cavi di alimentazione dell’elaboratore e di tutte le periferiche  
collegate.  
3. Rimuovere il coperchio dall’elaboratore.  
Passo 2. Disimballaggio dell’unità  
1. Prima di aprire l’imballo antistatico in cui è contenuta l’unità, metterlo in  
contatto con una superficie metallica per almeno due secondi. In questo  
modo, si riduce l’elettricità statica presente nell’involucro di protezione e  
nel proprio corpo.  
2. Rimuovere l’unità dall’imballo di protezione da elettricità statica. Se è  
necessario poggiare l’unità, posizionare l’imballo antistatico su una  
superficie piana, come una rivista e posizionare l’unità sull’imballo  
antistatico.  
Passo 3. Selezionare la porta IDE  
Di solito, gli elaboratori nuovi dispongono di due porte IDE, ognuna delle  
quali è in grado di supportare due unità. Di solito, la porta IDE su cui viene  
collegata l’unità disco fisso è la porta IDE primaria. L’altra porta IDE è la porta  
secondaria. La porta IDE e la posizione del cavo selezionata determinano  
l’impostazione del cavallotto di configurazione utilizzata per l’unità.  
v Se si dispone di due porte IDE, collegare l’unità CD-ROM alla porta IDE  
secondaria della scheda di sistema o dell’adattatore IDE. Se l’unità CD-ROM  
è l’unica unità della porta IDE secondaria, utilizzare l’impostazione di  
configurazione primaria. Se l’unità CD-ROM è la seconda unità della porta  
secondaria, utilizzare l’impostazione di configurazione secondaria.  
v Se è necessario collegare l’unità CD-ROM alla porta IDE primaria (la stessa  
porta dell’unità disco fisso o di un’altra unità veloce), utilizzare  
l’impostazione secondaria per l’unità CD-ROM e l’impostazione primaria per  
l’unità più veloce. In alcuni esempi, potrebbe essere necessario modificare  
1-42 Unità CD-ROM con IDE interno 48X-20X: Guida per l’utente  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
l’impostazione di configurazione dell’unità disco fisso come impostazione  
secondaria insieme a quella principale, quando viene collegata un’unità  
secondaria sullo stesso cavo. Per ulteriori informazioni sull’impostazione dei  
cavallotti di configurazione su altre unità, consultare la documentazione  
fornita con l’elaboratore oppure con l’unità in uso.  
v Alcuni elaboratori non IBM supportano l’impostazione di selezione del cavo,  
dove la posizione dell’unità del cavo determina se un’unità è primaria o  
secondaria. Per determinare se l’elaboratore supporta tale impostazione,  
consultare la documentazione fornita con l’elaboratore.  
Passo 4. Impostazione del cavallotto di configurazione  
La figura illustra l’impostazione «1¬ primaria, l’impostazione «2¬ secondaria e  
l’impostazione «3¬ di selezione del cavo. Configurare l’unità CD-ROM  
posizionando il cavallotto sulla serie di piedini corrispondenti all’impostazione  
selezionata nel Passo 3. Consultare la sezione “Passo 3. Selezionare la porta  
v Se si configura l’unità CD-ROM come primaria, impostare il cavallotto come  
impostazione dell’unità «1¬ primaria. Questa modalità è il modo in cui viene  
impostata l’unità quando viene fornita. Se è presente una seconda unità sulla  
porta IDE, verificare che l’unità sia configurata come secondaria.  
v Se si configura l’unità CD-ROM come secondaria, impostare il cavallotto  
come impostazione dell’unità «2¬ secondaria. Verificare che l’altra unità della  
porta IDE sia configurata come primaria (oppure impostazione secondaria  
insieme a quella primaria).  
v Se si configura l’unità CD-ROM come selezione del cavo, impostare il  
cavallotto come impostazione dell’unità «3¬ di selezione del cavo. Se è  
presente un’altra unità sulla porta IDE, verificare che la seconda unità sia  
configurata come selezione del cavo.  
Passo 5. Fissaggio dell’unità nel vano  
Avvertenza: Utilizzare la vite di fissaggio da M3 x5 mm fornita nel pacchetto  
di opzione. L’utilizzo delle viti troppo lunghe potrebbe danneggiare l’unità  
Parte 1: Guida per l’utente e all’installazione 1-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E’ possibile fissare l’unità CD-ROM orizzontalmente o verticalmente. Se si fissa  
l’unità verticalmente, è necessario collegare i CD, inseriti nell’unità, prima di  
chiudere il vassoio dell’unità o l’unità CD-ROM non riesce a leggere il CD  
correttamente. Per ulteriori istruzioni sul fissaggio dei CD in un’unità fissata  
verticalmente, consultare la sezione “Caricamento di un CD” a pagina 1-48.  
1. Far scorrere l’unità nel vano. L’elaboratore potrebbe disporre di specifiche  
procedure richieste per l’installazione delle unità di memoria. Per ulteriori  
istruzioni, consultare la documentazione fornita con l’elaboratore.  
2. Allineare i fori delle viti tra il vano e l’unità con i fori filettati del supporto  
di fissaggio o dell’alloggiamento dell’unità; quindi inserire le viti per  
verificare le relative posizioni. Di solito, due viti vengono utilizzate su  
ciascun lato.  
3. Verificare che l’allineamento sia corretto; quindi serrare le viti per fissare  
l’unità. Non serrare eccessivamente.  
Passo 6. Collegamento dei cavi all’unità  
Collegare i cavi all’unità CD-ROM come segue.  
1. Se si dispone di un adattatore audio, individuare i cavi audio inclusi e  
determinare il cavo che si adatta in modo migliore alla porta di immissione  
audio CD dell’adattatore audio. Collegare un’estremità del cavo audio  
selezionato al connettore di emissione audio dell’unità «1¬ e l’altra  
estremità del cavo alla porta di immissione audio CD dell’adattatore audio.  
Conservare l’altro cavo nel caso in cui viene utilizzato un adattatore audio  
diverso in futuro.  
2. Collegare un connettore di cavo IDE a 40 piedini «2¬ al connettore IDE  
sull’unità. Allineare il cavo in modo tale che il margine colorato sia più  
vicino al connettore del cavo di alimentazione «3¬. Utilizzare il cavo IDE  
fornito con questa opzione se non è presente alcun cavo collegato alla porta  
IDE oppure se è presente solo un connettore dell’unità sul cavo IDE  
dell’elaboratore.  
1-44 Unità CD-ROM con IDE interno 48X-20X: Guida per l’utente  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Collegare un cavo di alimentazione a quattro piedini «3¬ al connettore di  
alimentazione dc dell’unità.  
Passo 7. Completamento dell’installazione dell’hardware  
1. Verificare che l’unità sia fissata correttamente e che i connettori siano  
collegati correttamente.  
2. Verificare che i cavi no intralcino il coperchio dell’elaboratore e che non  
blocchino la ventola dell’alimentatore o il canale del flusso d’aria.  
3. Reinstallare il coperchio dell’elaboratore.  
4. Ricollegare tutte le unità e verificare qualsiasi unità che potrebbe essere  
scollegata, come la tastiera, il mouse ed il video.  
5. Collegare tutti i cavi di alimentazione alle prese elettriche.  
Passo 8. Aggiornamento della configurazione  
dell’elaboratore  
Una volta terminata l’installazione dell’hardware, riavviare l’elaboratore. Di  
solito, vengono visualizzate le informazioni relative all’impostazione e alla  
configurazione. Se tale pannello non viene visualizzato, per le informazioni  
relative all’accesso del programma per l’impostazione o per la configurazione,  
consultare la documentazione dell’elaboratore.  
Per visualizzare le informazioni di configurazione relative alla maggior parte  
degli elaboratori IBM, premere il pulsante F1 durante l’avvio. Una volta  
terminata la visualizzazione delle informazioni, salvare le modifiche apportate  
ed uscire.  
Nota: E’ possibile che alcuni elaboratori vecchi, dotati di una porta IDE, non  
visualizzino le informazioni relative all’unità CD-ROM, quando vengono  
visualizzate di nuovo le informazioni di impostazione e di  
configurazione. Se l’installazione è stata completata correttamente è  
anche possibile utilizzare l’unità CD-ROM.  
Passo 9. Installazione dei driver di periferica  
Questa sezione contiene le istruzioni relative all’installazione dei driver di  
periferica dell’unità CD-ROM, in base al sistema operativo in uso.  
Nota: I requisiti dell’utente variano; è possibile personalizzare le impostazioni  
dei driver di periferica del sistema operativo in uso. Se l’elaboratore non  
funziona con le impostazioni predefinite, fornite dalle istruzioni  
sull’installazione in questa sezione, consultare la sezione “Appendice A.  
Personalizzazione delle impostazioni di configurazione dei driver di  
periferica” a pagina A-1 per le informazioni sulla personalizzazione delle  
impostazioni di configurazione dei driver di periferica.  
Parte 1: Guida per l’utente e all’installazione 1-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Driver di periferica per Windows 95, Windows 98, Windows NT,  
Windows 2000 e Windows Me  
I sistemi operativi Windows 98 e Windows Me rilevano automaticamente  
l’unità CD-ROM e non visualizzano alcun pannello di installazione. Se i  
pannelli di installazione del driver vengono visualizzati dopo l’avvio del  
sistema operativo, seguire le istruzioni visualizzate per installare i driver di  
periferica. Per ulteriori informazioni, consultare la documentazione fornita con  
il sistema operativo in uso.  
1-46 Unità CD-ROM con IDE interno 48X-20X: Guida per l’utente  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Utilizzo e manutenzione dell’unità  
Questa sezione comprende le istruzioni relative alla manutenzione corretta dei  
CD e al funzionamento dell’unità CD-ROM.  
Manutenzione di un CD  
I CD sono strumenti a densità elevata che devono essere gestiti con cura e  
pulizia appropriata in modo da essere leggibili. Tali precauzioni consentono di  
prolungare la durata dei CD.  
Avvertenza: Non passare il panno sulla superficie del CD facendo dei  
movimenti circolari perché ciò potrebbe danneggiare i dati in modo  
irreversibile.  
v Afferrare il CD per le estremità o per il foro centrale. Non toccare la  
superficie dei dati del CD.  
v Per rimuovere la polvere o le impronte, passare un panno morbido e pulito  
dall’interno verso l’esterno del CD.  
v Non scrivere sulla superficie.  
v Non collocare il CD alla luce diretta del sole.  
v Per pulire il CD, non utilizzare prodotti per la pulizia.  
v Non curvare il CD.  
Manutenzione dell’unità CD-ROM  
Durante il funzionamento, per proteggere l’unità CD-ROM osservare le  
seguenti precauzioni:  
v Rimuovere un CD dall’unità prima di spostare l’unità.  
v Non inserire oggetti esterni nell’unità.  
v Non rimuovere il coperchio dell’unità o tentare di effettuare assistenza  
sull’unità.  
Parte 1: Guida per l’utente e all’installazione 1-47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v Non utilizzare l’unità nelle seguenti condizioni:  
Temperatura elevata, umidità elevata o luce diretta del sole  
– Vibrazioni eccessive, urti improvvisi o superficie inclinata  
– Polvere eccessiva  
Caricamento di un CD  
Per caricare un CD in un’unità CD-ROM fissata orizzontalmente, procedere nel  
modo seguente:  
1. Premere il pulsante di espulsione/caricamento. Il vassoio viene estratto  
dall’unità.  
2. Inserire il CD nel vassoio di caricamento con l’etichetta rivolta verso l’alto.  
3. Chiudere il vassoio di caricamento premendo il pulsante di  
espulsione/caricamento oppure esercitando una leggera pressione sul  
vassoio verso l’interno dell’unità.  
Avvertenza: Non estrarre con forza il vassoio; non inserire oggetti esterni nel  
vassoio del CD.  
1-48 Unità CD-ROM con IDE interno 48X-20X: Guida per l’utente  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Per caricare un CD in un’unità CD-ROM fissata verticalmente, procedere nel  
modo seguente:  
1. Premere il pulsante di espulsione/caricamento.  
2. Consultare le illustrazioni e confrontarle con il vassoio di caricamento in  
uso.  
v Se il vassoio di caricamento è simile all’illustrazione a sinistra, inserire il  
CD con attenzione, in modo che i bordi del CD siano posizionati al di  
sotto della linguetta del vassoio di caricamento. Queste linguette di  
plastica coprono i bordi del CD e lo posizionano correttamente. Le  
linguette sono collegate al vassoio e non è possibile spostarle.  
v Se il vassoio di caricamento è simile all’illustrazione a destra, inserire il  
CD nel vassoio ed premere leggermente sulla linguetta in avanti per  
posizionare il CD correttamente.  
3. Chiudere il vassoio di caricamento premendo il pulsante di  
espulsione/caricamento oppure esercitando una leggera pressione sul  
vassoio verso l’interno dell’unità.  
Parte 1: Guida per l’utente e all’installazione 1-49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Espulsione manuale di un CD  
Se viene premuto il pulsante di espulsione/caricamento ed il vassoio non viene  
estratto, spegnere l’elaboratore. Raddrizzare la graffetta per la carta per  
formare uno strumento, come riportato nella figura seguente. L’estremità di  
una graffetta deve essere di almeno 45 mm. Inserire l’estremità estesa nel foro  
di espulsione manuale, posto sulla parte anteriore dell’unità (consultare la  
sezione “Vista anteriore dell’unità” a pagina 1-41). Premere la graffetta per la  
carta nel foro fino a quando viene aperto il vassoio. Estrarre il vassoio  
delicatamente fino a quando è possibile rimuovere il CD.  
45 mm  
1.8 in  
Riproduzione di un CD audio  
Per riprodurre un CD audio, è necessario disporre di un programma audio CD  
installato sull’elaboratore. Le applicazioni di Windows 98, Windows Me,  
Windows NT e Windows 2000 comprendono i programmi di riproduzione di  
CD audio.  
Per ulteriori informazioni sull’utilizzo del software di riproduzione audio,  
consultare la documentazione fornita con il sistema operativo o con  
l’elaboratore.  
Windows 95, Windows 98, Windows NT 4.0, Windows 2000 o  
Windows Me  
Per utilizzare il programma di utilità audio, procedere nel modo seguente:  
1. Accendere l’elaboratore ed avviare il sistema operativo.  
2. Inserire un CD audio nell’unità CD-ROM.  
3. La riproduzione del CD inizia. Se il CD non avvia la riproduzione oppure  
se si verificano problemi con l’audio, per le informazioni sulla risoluzione  
dei problemi, consultare la documentazione fornita con l’adattatore audio o  
l’elaboratore.  
Utilizzo di un CD dati  
E’ possibile che i CD dati contengano i file di dati, giochi o applicazioni.  
1-50 Unità CD-ROM con IDE interno 48X-20X: Guida per l’utente  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Windows 95, Windows 98, Windows NT 4.0, Windows 2000 o  
Windows Me  
Per leggere un CD dati, procedere nel modo seguente:  
1. Accendere l’elaboratore ed avviare il sistema operativo.  
2. Inserire un CD dati nell’unità CD-ROM. Diversi CD di programma  
vengono avviati automaticamente. Se il CD non viene avviato  
automaticamente, andare al passo 3.  
3. Fare doppio clic su Risorse del computer.  
4. Verificare che sia visualizzata l’icona CD-ROM.  
5. Fare doppio clic sull’icona CD-ROM.  
6. Verificare che sia possibile visualizzare i file sul CD.  
Se non si è in grado di selezionare l’icona CD-ROM oppure visualizzare i dati,  
per le informazioni sull’assistenza tecnica, consultare la sezione “Appendice B.  
Risoluzione dei problemi” a pagina B-1 o “Appendice C. Informazioni  
sull’assistenza tecnica” a pagina C-1.  
Parte 1: Guida per l’utente e all’installazione 1-51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-52 Unità CD-ROM con IDE interno 48X-20X: Guida per l’utente  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parte 1: Instalação e Guia do Usuário  
A Unidade de Disco de CD-ROM IDE Interna IBM®48X-20X pode ler um disco  
compacto (CD) contendo aproximadamente 680 MB1 de informações. Ela foi  
projetada para ser instalada em um computador pessoal que utiliza a  
arquitetura IDE (Integrated Drive Electronics) ou EIDE (Enhanced Integrated  
Drive Electronics) avançada.  
O dispositivo de CD-ROM fornece dados até 48 vezes a velocidade do  
CD-ROM padrão, fornecendo dados em até 7200 KB2 por segundo. A unidade  
lê discos compactos que atendem aos padrões ISO-9660 e High-Sierra Group  
(HSG). Ela também lê discos de múltiplas sessões de arquitetura estendida  
(XA), como o Kodak Photo CD.  
Descrição do Produto  
Além deste manual, o pacote de opcionais inclui:  
v Unidade de Disco de CD-ROM IDE Interna 48X-20X  
v U cabo de áudio “Y” e um cabo de áudio  
v Quatro parafusos de montagem (M3 x 5 mm, para slot)  
v Um cabo IDE para a conexão de dois dispositivos IDE  
v Guia de Segurança do Laser para unidades de CD-ROM  
Entre em contato com o fornecedor se algum item estiver faltando ou  
danificado. Certifique-se de guardar o comprovante de compra. Ele pode ser  
necessário para a solicitação do serviço de garantia.  
Você pode localizar mais informações sobre como obter auxílio, suporte técnico  
e serviço de garantia no “Apêndice C. Informações de Auxílio e Serviços” na  
página C-1. Antes de ligar para o suporte técnico, consulte o “Apêndice B.  
Resolução de Problemas” na página B-1.  
Antes de Começar  
Determine se o computador atende aos requisitos mínimos; consulte  
“Requisitos do Sistema” na página 1-54 para obter detalhes. Leia as seguintes  
informações antes de começar a instalação.  
1. MB equivale aproximadamente a 1 000 000 bytes quando refere-se à capacidade de  
armazenamento  
2. KB equivale aproximadamente a 1024 bytes quando refere-se a velocidades de transferência de  
dados  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-53  
Você deve concluir as seguintes etapas para instalar a unidade:  
1. Determine qual conector IDE utilizará e a definição de configuração  
correspondente.  
2. Posicione o jumper de configuração na unidade ou altere-o (e  
possivelmente faça alterações nos jumpers de configuração de outros  
dispositivos).  
Se não entender esses procedimentos ou não tiver certeza sobre sua habilidade  
em executar todos os procedimentos descritos, peça a um técnico de  
computador qualificado que instale sua unidade de CD-ROM.  
Requisitos do Sistema  
Antes de começar a instalar a unidade, assegure-se de que o computador  
atenda aos seguintes requisitos do sistema.  
v Microprocessador mínimo: 80486  
v Quantidade mínima de RAM: 4 MB  
v Unidade de disquete de 5,25 pol.  
v Conexão IDE disponível  
v Conexão de alimentação interna disponível  
v Compartimento de unidade disponível  
v Um dos seguintes sistemas operacionais:  
®
– Microsoft Windows® 95  
®
– Microsoft Windows 98  
– Microsoft® Windows NT® 4.0  
– Microsoft Windows 2000 Professional  
– Microsoft Windows Millennium Edition (Me)  
Instruções de Manuseio  
Para proteger o dispositivo durante a instalação, observe as seguintes  
precauções:  
v Manuseie a unidade com cuidado. Soltar ou balançar a unidade poderá fazer  
com que os componentes dentro do invólucro da unidade sejam danificados.  
v Mantenha o dispositivo em sua bolsa antiestática até o momento de  
instalação da unidade no computador. Limite seus movimentos. Eles podem  
causar acúmulo de eletricidade estática.  
v Não force a inserção do cabo de alimentação. Isso pode danificar o conector  
ou a unidade.  
1-54 Unidade de Disco de CD-ROM IDE Interna 48X-20X: Guia do Usuário  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Vista Frontal da Unidade  
Consulte a ilustração para identificar as partes que podem ser mencionadas  
nas instruções de instalação.  
«1¬Tomada do fone de ouvido. Conecte os fones de ouvido nessa tomada para  
a saída de áudio.  
«2¬Controle de volume. Ajuste esse indicador para controlar o volume.  
«3¬Bandeja de CD. Utilize a bandeja de CD para carregar um CD na unidade.  
«4¬Indicador de ocupado. Essa luz acende quando an unidade lê um CD de  
dados ou reproduz um CD de áudio.  
«5¬Orifício de ejeção manual. Utilize-o para ejetar a bandeja de CD se o botão  
Ejetar/Carregar não estiver operando corretamente.  
«6¬Botão Ejetar/Carregar. Pressione esse botão para abrir ou fechar a bandeja  
de CD.  
Vista Posterior da Unidade  
Consulte a ilustração para identificar as partes que podem ser mencionadas  
nas instruções de instalação.  
«1¬Reservado.  
«2¬Conector de saída de áudio. Esse conector é utilizado para conectar a  
unidade de CD-ROM a uma placa de áudio.  
Parte 1: Instalação e Guia do Usuário 1-55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
«3¬Pinos de configuração. O posicionamento dos jumpers nesses pinos  
determina a prioridade da unidade de CD-ROM no barramento IDE.  
«4¬Conector IDE. Esse conector é utilizado para conectar a unidade de  
CD-ROM ao cabo IDE.  
«5¬Conector de alimentação CC. Esse conector é utilizado para conectar o  
cabo de alimentação CC à unidade de CD-ROM.  
Instalando a Unidade  
Siga estas etapas para instalar a unidade de CD-ROM no computador.  
Etapa 1. Abrindo o Computador  
1. Desligue o computador e todos os dispositivos conectados.  
2. Desconecte os cabos de alimentação do computador e de todos os  
dispositivos conectados.  
3. Remova a tampa do computador.  
Etapa 2. Desembalando a Unidade  
1. Antes de abrir a bolsa antiestática na qual a unidade vem embalada,  
encoste a bolsa em uma superfície de metal não-pintada por pelo menos  
dois segundos. Isso drenará a eletricidade estática da embalagem e de seu  
corpo.  
2. Retire a unidade da bolsa. Se você precisar retirar a unidade da bolsa,  
ponha a bolsa antiestática sobre uma superfície plana e revestida, como  
uma revista, e coloque a unidade sobre a bolsa antiestática.  
Etapa 3. Selecionando a Porta IDE  
Os computadores mais novos têm geralmente duas portas IDE e cada uma  
pode suportar dois dispositivos. Em geral, a porta IDE à qual a unidade de  
disco rígido está conectada é a porta IDE primária. A outra porta IDE é a porta  
secundária. A porta IDE e a posição do cabo selecionada determinam qual  
posicionamento do jumper de configuração é utilizado para a unidade.  
v Se houver duas portas IDE, conecte a unidade de CD-ROM à porta IDE  
secundária na placa de sistema ou na placa IDE. Se a unidade de CD-ROM  
for o único dispositivo na porta IDE secundária, utilize a definição de  
configuração primária. Se a unidade de CD-ROM for o segundo dispositivo  
na porta secundária, utilize a definição de configuração secundária.  
v Se você precisar conectar a unidade de CD-ROM à porta IDE primária (a  
mesma porta da unidade de disco rígido ou de outro dispositivo veloz),  
utilize a definição secundária para a unidade de CD-ROM e a definição  
primária para o dispositivo mais veloz. Em alguns casos, pode ser necessário  
alterar a definição de configuração da unidade de disco rígido para mestre  
1-56 Unidade de Disco de CD-ROM IDE Interna 48X-20X: Guia do Usuário  
Download from Www.Somanuals.com. All Manuals Search And Download.  
com secundário presente, ao conectar um dispositivo secundário no mesmo  
cabo. Para obter mais informações sobre o posicionamento dos jumpers de  
configuração em outros dispositivos, consulte a documentação que  
acompanha o computador ou o dispositivo em questão.  
Alguns computadores não-IBM suportam a definição seleção de cabo, na  
qual a posição do dispositivo no cabo determina se um dispositivo é  
primário ou secundário. Consulte a documentação que acompanha o  
computador para determinar se ele suporta essa definição.  
Etapa 4. Definindo o Jumper de Configuração  
A ilustração mostra a definição «1¬ primária, a definição «2¬ secundária (ou  
escravo) e a definição «3¬ seleção de cabo. Configure a unidade de CD-ROM,  
colocando o jumper sobre o conjunto de pinos correspondentes à definição  
escolhida na Etapa 3. Consulte a “ Etapa3. Selecionando a Porta IDE” na  
página 1-4.  
Parte 1: Instalação e Guia do Usuário 1-57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v Se estiver configurando a unidade de CD-ROM como primária, defina o  
jumper para o dispositivo «1¬ mestre. (Essa é a forma como a unidade é  
vem definida.) Se houver um segundo dispositivo na porta IDE, certifique-se  
de ele esteja configurado como secundário.  
v Se estiver configurando a unidade de CD-ROM como secundária, defina o  
jumper para o dispositivo «2¬ secundário. Certifique-se de que o outro  
dispositivo na porta IDE esteja configurado como primário (ou primário com  
secundário presente).  
v Se estiver configurando a unidade de CD-ROM como seleção de cabo, defina  
o jumper para o dispositivo «3¬ seleção de cabo. Se houver outro dispositivo  
na porta IDE, certifique-se de que o dispositivo secundário também esteja  
configurado para seleção de cabo.  
Etapa 5. Montando a Unidade no Compartimento  
Aviso: Assegure-se de utilizar o parafuso de montagem M3 x 5 mm incluído  
no pacote de opcionais. O uso de parafusos muito longos pode danificar a  
unidade.  
Você pode montar a unidade de CD-ROM no computador na posição  
horizontal ou vertical. Se montá-la na posição vertical, será necessário prender  
os CDs que forem colocados na unidade antes de a bandeja da unidade ser  
fechada ou a unidade de CD-ROM não poderá ler o CD corretamente. Para  
obter mais instruções sobre como prender os CDs em uma unidade montada  
na posição vertical, vá para “Carregando um CD” na página 1-62.  
1. Deslize a unidade para dentro do compartimento. O computador poderá  
ter procedimentos específicos requeridos para instalação de dispositivos de  
armazenamento. Consulte a documentação que acompanha o computador  
para obter instruções adicionais.  
2. Alinhe os orifícios de parafusos do compartimento de unidade com os  
orifícios alinhados no invólucro da unidade ou no suporte de montagem;  
então rosqueie levemente os parafusos para verificar suas posições.  
Normalmente, são utilizados dois parafusos de cada lado.  
3. Verifique se o alinhamento está correto; em seguida, aperte os parafusos  
para prender a unidade. Não os aperte em excesso.  
1-58 Unidade de Disco de CD-ROM IDE Interna 48X-20X: Guia do Usuário  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Etapa 6. Conectando os Cabos à Unidade  
Conecte os cabos à unidade de CD-ROM, conforme segue.  
1. Se você tiver uma placa de áudio, localize os cabos de áudio incluídos e  
determine qual cabo se encaixa melhor na porta de entrada de áudio do  
CD na placa de áudio. Conecte uma extremidade do cabo de áudio  
selecionado ao conector de saída de áudio do dispositivo «1¬ e a outra  
extremidade à porta de entrada de áudio do CD da placa de áudio. Guarde  
o outro cabo caso utilize uma placa de áudio diferente no futuro.  
2. Conecte um conector de cabo IDE de 40 pinos «2¬ao conector IDE da  
unidade. Alinhe o cabo de maneira que a borda codificada por cor fique  
mais próxima ao conector do cabo de alimentação «3¬. Utilize o cabo IDE  
fornecido com este opcional, se não houver nenhum cabo conectado à porta  
IDE ou se houver apenas um conector de dispositivo no cabo IDE.  
3. Conecte um cabo de alimentação de quatro pinos «3¬ ao conector de  
alimentação CC do dispositivo.  
Etapa 7. Concluindo a Instalação do Hardware  
1. Assegure-se de que a unidade esteja montada firmemente e de que os  
conectores também estejam conectados firmemente.  
2. Assegure-se de que os cabos não interfiram na tampa do computador nem  
bloqueiem o caminho das lâminas do ventilador da fonte de alimentação ou  
o caminho do fluxo de ar.  
3. Instale novamente a tampa do computador.  
4. Reconecte todos os dispositivos e verifique todos aqueles que possam ter  
ficado desconectados, como teclado, mouse e monitor.  
5. Conecte todos os cabos de alimentação às tomadas elétricas.  
Step 8. Atualizando a Configuração do Computador  
Depois de ter concluído a instalação do hardware, reinicie o computador.  
Normalmente, a tela de informações de configuração/instalação é exibida. Se  
Parte 1: Instalação e Guia do Usuário 1-59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
isso não ocorrer, verifique a documentação do computador para obter  
informações sobre como acessar o programa utilitário de configuração ou  
instalação.  
Para ver as informações de configuração da maioria dos computadores IBM,  
pressione o botão F1 durante a inicialização. Quando terminar de rever as  
informações, salve as alterações e saia.  
Nota: Alguns computadores mais antigos com uma porta IDE podem não  
exibir as informações da unidade de CD-ROM, durante a revisão das  
informações de configuração/instalação. Ainda é possível utilizar a  
unidade de CD-ROM nessa situação, se você tiver concluído  
corretamente a instalação.  
Etapa 9. Instalando Drivers de Dispositivo  
Esta seção contém as instruções de instalação de drivers de dispositivo para a  
unidade de CD-ROM, com base no sistema operacional que você está  
utilizando.  
Nota: Os requisitos do usuário variam; as definições do driver de dispositivo  
para o sistema operacional podem ser personalizadas. Se o computador  
não funcionar bem com as definições padrão fornecidas nas instruções  
de instalação nesta seção, consulte o “Apêndice A. Personalizando  
Definições de Configuração do Driver de Dispositivo” na página A-1  
para obter informações sobre como personalizar as definições de  
configuração do driver de dispositivo.  
Driver de Dispositivo para Windows 95, Windows 98, Windows NT,  
Windows 2000 e Windows Me  
O Windows 98 e o Windows Me detectam automaticamente a unidade de  
CD-ROM e não apresentam nenhuma tela de instalação. Se as telas de  
instalação do driver forem exibidas após o início do sistema operacional, siga  
as instruções na tela para instalar os drivers de dispositivo. Consulte a  
documentação que acompanha o sistema operacional para obter mais  
informações.  
1-60 Unidade de Disco de CD-ROM IDE Interna 48X-20X: Guia do Usuário  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Utilização e Cuidados com a Unidade  
Esta seção inclui instruções sobre o cuidado adequado com os CDs e sobre o  
cuidado e a operação da unidade de CD-ROM.  
Cuidando de um CD  
CDs são mídias de alta densidade que devem ser manuseadas com cuidado e  
mantidas limpas para garantir que permaneçam legíveis. As seguintes  
precauções ajudam a prolongar a vida útil dos CDs.  
Aviso: Limpar um CD com um movimento circular pode causar perda de  
dados.  
v Segure o CD nas bordas ou no orifício central. Não toque em sua superfície  
de dados.  
v Para remover poeira ou digitais, limpe o CD do centro para a borda com um  
pano macio e sem fiapos.  
v Não escreva na superfície.  
v Não exponha o CD à luz direta do sol.  
v Não utilize produtos de limpeza comerciais para limpar o CD.  
v Não entorte o CD.  
Cuidados com a Unidade de CD-ROM  
Para proteger a unidade de CD-ROM durante a operação, observe as  
precauções a seguir:  
v Remova um CD da unidade antes de mover a unidade.  
v Não insira objetos estranhos na unidade.  
v Não remova a tampa da unidade ou tente fazer reparos nela.  
v Não opere a unidade sob quaisquer uma das seguintes condições:  
Parte 1: Instalação e Guia do Usuário 1-61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperatura alta, umidade alta ou luz direta do sol  
– Vibração excessiva, choque repentino ou superfície inclinada  
– Poeira excessiva  
Carregando um CD  
Para carregar um CD em uma unidade de CD-ROM montada na posição  
horizontal, faça o seguinte:  
1. Pressione o botão Ejetar/Carregar. A bandeja desliza para fora da unidade.  
2. Insira o CD na bandeja de carregamento com a etiqueta voltada para cima.  
3. Feche a bandeja de carregamento pressionando o botão Ejetar/Carregar ou  
empurrando cuidadosamente a bandeja para dentro.  
Aviso: Não force a bandeja a abrir; não insira objetos estranhos na bandeja  
de CD.  
1-62 Unidade de Disco de CD-ROM IDE Interna 48X-20X: Guia do Usuário  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Para carregar um CD em uma unidade de CD-ROM montada na posição  
vertical, faça o seguinte:  
1. Pressione o botão Ejetar/Carregar.  
2. Veja as ilustrações e compare-as com a sua bandeja de carregamento.  
v Se ela for parecida com a ilustração esquerda, insira o CD  
cuidadosamente de forma que suas bordas fiquem sob as presilhas na  
bandeja de carregamento. Essas presilhas de plástico cobrem as bordas  
do CD e o mantêm no local. Elas estão conectadas à própria bandeja e  
não podem ser movidas.  
v Se ela for parecida com a ilustração direita, insira o CD na bandeja e  
empurre cuidadosamente a presilha móvel para frente a fim de manter o  
CD no local.  
3. Feche a bandeja de carregamento pressionando o botão Ejetar/Carregar ou  
empurrando cuidadosamente a bandeja para dentro.  
Parte 1: Instalação e Guia do Usuário 1-63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ejetando Manualmente um CD  
Se você pressionar o botão Ejetar/Carregar e a bandeja não deslizar para fora,  
desligue o computador. Endireite um clipe de papel grande para formar uma  
ferramenta, conforme mostrado na ilustração a seguir. A extremidade do clipe  
aberto deve estender-se a pelo menos 45 mm (1,8 pol). Insira a extremidade  
estendida no orifício de ejeção manual na parte frontal da unidade (consulte  
“Vista Frontal da Unidade” na página 1-55). Empurre o clipe de papel no  
orifício até que a bandeja seja aberta. Puxe cuidadosamente a bandeja para fora  
até que o CD possa ser removido.  
Reproduzindo um CD de Áudio  
Para reproduzir um CD de áudio, é necessário que um programa de CD de  
áudio esteja instalado no computador. Os aplicativos Windows 98, Windows  
Me, Windows NT e Windows 2000 incluem programas de reprodução de CD  
de áudio.  
Para obter mais informações sobre o uso do software de reprodução de áudio,  
consulte a documentação que acompanha o sistema operacional ou o  
computador.  
Windows 95, Windows 98, Windows NT 4.0, Windows 2000  
ou Windows Me  
Para utilizar o utilitário de áudio, faça o seguinte:  
1. Ligue o computador e inicie o sistema operacional, se ainda não o tiver  
feito.  
2. Insira o CD de áudio na unidade de CD-ROM.  
3. O CD começa a tocar. Se isso não ocorrer ou se você tiver problemas com o  
áudio, verifique a documentação que acompanha a placa de áudio ou o  
computador para obter informações sobre soluções de problemas.  
Utilizando um CD de Dados  
CDs de dados contêm arquivos de dados, jogos ou aplicativos.  
Windows 95, Windows 98, Windows NT 4.0, Windows 2000  
ou Windows Me  
Para ler um CD de dados, faça o seguinte:  
1-64 Unidade de Disco de CD-ROM IDE Interna 48X-20X: Guia do Usuário  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Ligue o computador e inicie o sistema operacional, se ainda não o tiver  
feito.  
2. Insira o CD de dados na unidade de CD-ROM. Muitos CDs de programas  
iniciarão automaticamente nesse ponto. Se isso não ocorrer, vá para a etapa  
3.  
3. Dê um clique duplo em Meu Computador.  
4. Verifique se o ícone de CD-ROM é exibido.  
5. Dê um clique duplo no ícone CD-ROM.  
6. Verifique se você pode exibir os arquivos no CD.  
Se não puder selecionar o ícone de CD-ROM ou exibir dados, consulte o  
“Apêndice B. Resolução de Problemas” na página B-1 ou o “Apêndice C.  
Informações de Auxílio e Serviços” na página C-1 para obter informações sobre  
serviço.  
Parte 1: Instalação e Guia do Usuário 1-65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-66 Unidade de Disco de CD-ROM IDE Interna 48X-20X: Guia do Usuário  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 íGwΓU  
IBM®48X-20X í IDE iH¬]t680 MBCb]pWAꢀ  
iw Integrated Drive Electronics (IDE) Enhanced IDE (EIDE) ꢀ  
[cHqúC  
ꢀm¬tiF@δ48 tAeqiFCϕ  
7200 KBCꢂꢀiH¬X ISO-9660 High-Sierra Group (HSG) ꢀ  
µíC]iH¬ꢀꢁhÑq@Bꢁí[c (XA) @ΦíApA  
Kodak Photo CDA¿C  
úí  
úFΓUºAú]tFUCMG  
v 48X-20X í IDE ≈  
v @° YTuꢂ@°Tsu  
v w]M3 x 5 mm, tíꢀ  
v @°sΓIDE ꢀmIDE u  
v pgwΓU  
½YlaAMgPsCOdzRCϕznDΓ  
ßAAiαzú÷RσC  
C-1 y²C. Help and service informationz σñúz÷p≤o≤  
UBNΣAHOAÑTCbzNΣAºeA²ꢁ  
B-1 y²B. Problem solvingz Añ÷eC  
u@  
YnTwzqúOXCDF\ 1-68 ytDz Añꢀ  
TCbz}lwºeA²¬UCTC  
wꢂꢀAz¿UCwBJG  
1. Mwn@IDE sHtm]wC  
2. wmWtm⌡(°ípΣª÷ꢀmtm⌡)C  
pGzúA Wz{AOúTwzOαꢃµ¿{AóXµ  
NHUzwC  
1. q(CD)C 1 MB Ñ1,000,000 Txsq  
2. ΣñA1 KB Ñ1024 xsq  
©
Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-67  
tD  
bwºeA²TwzqúXUCtDG  
v LBzCDG 80486  
v RAM CDG 4 MB  
v 5.25 Tníꢂꢀ≈  
v sbꢂiꢁIDE sum  
v sbꢂiꢁqu  
v sbꢂiꢁꢂꢀ≈≈ꢁ  
v qúwwUCΣñ@@tG  
®
Microsoft Windows® 95  
®
Microsoft Windows 98  
Microsoft® Windows NT® 4.0  
Microsoft Windows 2000 Professional  
Microsoft Windows Millennium Edition (Me)  
hBBzꢀꢁN  
bwíAFnO@zꢀmAϕuUCwIG  
v pꢅhBC¿n iαꢂlañC  
v
NOsRq]UñA@znwXCbXꢀw  
ACz@CNe÷PRqúC  
v
quYπΦVAHúijµíJquCjµíJquYA  
iαYC  
1-68 48X-20X í IDE : ΓU  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
 
\UCHOUíAHKyßiH QwíñUⁿ  
C  
ꢀ1ꢁ íC BTΘXAbꢀBíJC  
ꢀ2ꢁqεC πBΦAYiεqC  
ꢀ3ꢁCD ½LC  CD ½LiN CD JwñC  
ꢀ4ꢁúLOCoOGAϕwb¬AObꢂ  
TC  
ꢀ5ꢁΓꢀhꢂꢁCpGhX/J÷sLku@AΓ hꢃ  
hXꢀC  
ꢀ6ꢁhX/J÷sC ÷@Uo÷sYi}÷¼½LC  
ß°  
\UCHOUíAHKyßiH QwíñUⁿ  
C  
ꢀ1ꢁOdC  
ꢀ2ꢁTΘXYC oYsPtdC  
ꢀ3ꢁtm}C b}WiHXXUtmAMwbIDE ꢄ  
yWu² C  
ꢀ4ꢁIDE sC osiNsIDE uC  
1 íGwΓU 1-69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ꢀ5ꢁDC qsC osOsDC quC  
w  
ϕUCBJNwzqúñC  
BJ 1. }qú  
1. ÷¼qúΣꢀmqC  
2. εúqúmquC  
3. úqúC  
BJ 2. ε]ꢀ  
1. b}]RqUºeA²bWúꢀ≈ϕꢈGϕ  
CiHsb]WHz¡WRqC  
2. qRqUñXꢀCpGzUA²NRqU mbQ  
¡]p°xꢀϕWAMßANmbRqUWC  
BJ 3. IDE s  
qAbs¼qúñΓIDE sAC@siHΣΓíꢂꢀ  
C@δ ÑAqúñwsDnIDE sC t@IDE sꢀ  
YnIDE sCzIDE sMumAPtm⌡  
]wftαꢀmB@C  
v pGzqúñΓIDE sANsDOIDE tdW  
n IDE sCpGbꢇnIDE sWus@ꢀmAN  
}]wꢁDntmC pGnsWGꢀmAhꢁ  
Nꢀ}]wntm]wC  
v pGzNsDnIDE s]YPwΣªtꢀ  
m@P@sꢀAh]wnsA ²tꢅ  
ꢀmꢁDnsCbYípUApGP@°ꢀunꢀ  
ꢀ m A  N w ] w u D n B s b ꢂ ꢇ n ꢀ m v  
(master-with-secondary-present)C÷oꢀmW]wTA\H  
qúΣªwΘꢀmσíC  
v YD IBM tCqúiHΣuu]wv\αAiHHꢀmsꢀ  
uWmꢈMwꢅꢀmDnnꢀmCpGzqúπΣu  
]w\αA\Hzqúñ÷σC  
BJ 4. tm⌡]w  
πFDn ꢀ1ꢁ ]wBn]ꢀ2ꢁ ]wAHuꢀ3ꢁ  
]wCNzbBJ 3 ñ]wwm}WAYit  
1-70 48X-20X í IDE : ΓU  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
mC÷TA\ 1-70 yBJ 3. IDE sz Aꢀ  
eC  
v pGznNꢀmtm¿DnꢀmAN]wDn ꢀ1ꢁ ꢀ  
m]wC(zbtµfANwgz¿ꢀ@]w)CpGb IDE sꢀ  
WsbꢂGꢀmAꢀTwꢅꢀmtmnꢀmC  
v pGznNꢀmtm¿ꢇnꢀmAN]wn ꢀ2ꢁ ꢀ  
m]wCdTwt@sbP@IDE sWꢀmAtm¿ꢂ  
D n ꢀ m A O ] w u D n B s b ꢂ ꢇ n ꢀ m v  
(primary-with-secondary-present) ]wC  
v
pGznNꢀmtm¿uꢀmAN]wu∩  
ꢀ3ꢁ ꢀm]wCpGIDE sWPsbꢂΣªꢀmAdTw  
ꢅꢀm]]wuC  
BJ 5. Nwꢁꢀñ  
i: H]ñM3 x5 mm wC°ꢀiα  
ꢂlaC  
ziHNH¡ ΦíwzqúñCpGzH Φíwꢀ  
Ahb÷¼½LºeA²TwnAhPqúLk  
T¬C÷ wñTwíA\ 1-75  
yJz eC  
1. NJñCbzqúwxsꢀmiαnSϕ{Cꢂ  
Hzqúñ÷σC  
2. Nꢂꢀ≈≈Wꢂꢀꢀⁿ½[WFMß²ꢁꢁ≥  
WAT{ΣmLCqACΓTwC  
3. dTwꢇwFMßAWHTwCúiHCoꢉ  
C  
1 íGwΓU 1-71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BJ 6. su  
ϕUCΦítuC  
1. pGzqúñtdAtdWiHftT¼s  
TuCNTu@sꢀꢀΘXY ꢀ1ꢁ WA Nt@ꢅ  
stdWT¼sWC¼ΣªuAHK  
N½tdßiHftC  
2. N 40 wIDE uY ꢀ2ꢁ sWIDE YWCuAꢁ  
úPCΓΣtquY ꢀ3ꢁCpGqúñIDE sꢅSuA  
O IDE uWu@ꢀmYAhH]ꢁñꢀ  
IDE uC  
3. N 4-wqu ꢀ3ꢁ sDC qYWC  
BJ 7. ¿wΘw@ꢂ  
1. ꢀT{wgꢀA BYíw¡TsC  
2. ꢀTwuú½¬!qúAϕq¡ꢀ  
÷qC  
3. ½s!qúC  
4. ½ssíꢀmAdOꢀm¿uFd!pΣ  
LB½°ÑÑC  
5. NíꢀmquíqíyWC  
BJ 8. sqútm  
bz¿wΘw@ºßA½sꢅ zqúCqAπtm]me  
CpGπeAd\qúíσAHo÷tmw{  
í÷TC  
Ynd\jhIBM qútmΩTAbí÷U F1 ÷sCϕz°ꢃ  
÷]wTºßAxsMß°C  
1-72 48X-20X í IDE : ΓU  
Download from Www.Somanuals.com. All Manuals Search And Download.  
: Yu@IDE s¼qú ÑAϕzb°tm]mΩTAi  
αΣú÷÷TCYOboípUAunzw{ꢄ  
TLAz!MßiHꢁꢀC  
BJ 9. wꢀmX{í  
z@tA"OQwꢀmX {í@PΦíC  
: HꢃꢀDúPFiH@tqꢀmX {í  
]wCpGzqúñwíw]]w!LkB  
@AhA-1 y²A. Customizing device driver configuration  
settingsz Añ÷qꢀmX {ítm]w÷TC  
Windows 95BWindows 98BWindows NTBWindows 2000 ꢀ  
Windows Me ꢀmX{í  
Windows 98 M Windows Me Búπꢉ⌠≤weCp  
Gbzꢅ @tºßAπX {íweAeWwꢂ  
ꢀmX {íC÷TA\H@tíσC  
1 íGwΓU 1-73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POi  
úz÷PPOiíC  
Oi  
"@¬KCΘAHnpꢅOHTOΣñtTi¬CU  
CNiH° RC  
i: HΦV °iαy¿ΣñyóC  
v HΓΣtñípꢇCúntꢀϕC  
v Mú#AHXnL¼"ꢀñíVΣt °C  
v úiHbϕWgrC  
v iH²ΘUC  
v úiHMΣ»MC  
v úiH⌠Ns%C  
Oi  
YnO@B@ñAϕUCwIG  
v bºeA²XΣñC  
v únNΣL½íJñ  
v únꢃµε°Anꢃµ≈  
v KbUCú}ñꢁꢀG  
¬B¬πΘgñ  
gBoꢀϕW  
Lh#ꢁ  
1-74 48X-20X í IDE : ΓU  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Jꢀ  
YnNJ⌠¡wAµUCBJG  
1. ÷@UuhX/Jv÷sC½LXC  
2. N@WAꢁꢁmJ½LñC  
3. ÷@UuhX/Jv÷sON½LVꢁꢁJAYi÷¼½LC  
i:  
úiHjON½LXFiHNº½íJ½LñC  
1 íGwΓU 1-75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
YnNJ½wAµUCBJG  
1. ÷@UuhX/Jv÷sC  
2. dꢄꢂꢅ zJ½LíC  
v pGz½LO¬ñ½LApꢅaíJA²  
ΣtJ½LdCoªddϕΣtA  
HOꢂTmWCodO½LWA BOLkNΣ  
XC  
v pGz½LOkANíJ½LñAMßꢁꢁaN  
idVeXAYiNTwbTmWC  
3. ÷@UuhX/Jv÷sON½LVꢁꢁJAYi÷¼½LC  
1-76 48X-20X í IDE : ΓU  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ΓꢀhXꢁꢀ  
pGz÷UuhX/Jv÷sA²½LLkhXA²÷¼qúCpUꢂ  
AN@Ow¿@uπCꢀ°45 τ]1.8 T.  
Nꢂꢀ@íJeΦOWΓ hꢃꢇ]\ 1-69 y  
z AeꢀC NOwVeJA½L}εCpꢅaN½LXAM  
ßXzC  
45 mm  
1.8 in  
Tꢀ  
YnTAzqúñwgwT CD {íC Windows  
98BWindows MeBWindows NT Windows 2000 ꢀꢁ{íñYwg]t  
T{íC  
÷p≤TnΘ÷TA\Hz@tqú÷σ  
C  
Windows 95BWindows 98BWindows NT 4.0BWindows  
2000 Windows Me  
YnT{íAµUCBJG  
1. ²A}qúꢅ z@tC  
2. NTíJñC  
3. }lCpGꢃ  
AOTΦXFDAꢂ  
dHtdqúñσAHo MD÷TC  
ꢀ  
ñiαxsꢂBC{íÑC  
Windows 95BWindows 98BWindows NT 4.0BWindows  
2000 Windows Me  
Yn¬AµUCBJG  
1. ²A}qúꢅ z@tC  
2. NíJñCAjí{íꢃ  
{íAiµBJ 3C  
3. s÷ΓUqúC  
CpGñ  
4. τOπ CD-ROM C  
5. s÷ΓU CD-ROM C  
1 íGwΓU 1-77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. dT{ziH°WC  
pGzLkCD-ROM O°ñA\ B-1 y²  
B. Problem solvingz C-1 y²C. Help and service informationz Ñσ  
eHMDNΣA÷TC  
1-78 48X-20X í IDE : ΓU  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Q<H 1: $s9H<k*hSf<6<:&,$I  
IBM®b"? 48 \. CD-ROM Ii$V (IDE) O"s 680 MB1 N3sQ/  
H&G#9/ (CD) rI_hk3H,G-^9#\=JO"Integrated Drive  
Electronics (IDE) "<-F/Ac<^?OH% IDE "<-F/Ac<rHQ9  
kQ<=Jk&3sTe<?<KhjU1k_WKJCF$^9#  
CD-ROM uVO"8` CD-ROM .YNGb 48 \ (Gb 7200 KB2 / C) G  
G<?r>w7^9#\Ii$VO"ISO-9660 H High-Sierra Group (HSG) 8  
`r~?93sQ/H&G#9/rI_hj^9#3N>"^kA;C7gs"  
H%"<-F/Ac< (XA) G#9/ (Kodak U)H CD JI) bI_hj^  
9#  
=Jb@  
\qN>K"\*W7gs&QC1<8KO!NJ\,^^lF$^9#  
v b"? 48 \. CD-ROM Ii$V (IDE)  
v “Y” *<G#*&1<Vk 1 \"*<G#*&1<Vk 1 \  
v hjU1QM8 4 \ (M3 x 5 mm"BU-)  
v 2 fN IDE GP$9\3Q IDE 1<Vk 1 \  
v CD-ROM Ii$VKX9kl<6<NB4eNjz-  
J\,T-";}7F$klgKO"*ce2NNd9K4"m/@5$#N}  
q^?O/l8CHN5(O,:]I7F*$F/@5$#]Z5<S9ru1  
k?aKs(raailklg,"j^9#  
XkW";Q5]<H"*hS]Z5<S9r~j9k}!O" C-1 Z<8N  
XAppendix C. Help and service informationYK-\5lF$^9#;Q5]<  
HKEC9k0K" B-1 Z<8NXAppendix B. Problem solvingYr2H7F  
/@5$#  
Oak0K  
*H$N3sTe<?<,G.Wor~?7F$k+=L7F/@5$#\YK  
D$FO" 1-80Z<8NX79F`WoYr2H7F/@5$#hjU1rOa  
k0K!Npsr*I_/@5$#  
\Ii$VrhjU1kKO"!N9FCWrB\7F/@5$#  
1. HQ9k IDE 3M/?<H"P~9k=._jMrhj7^9#  
1. MB O"-1hNFL r(9lg"s 1 000 000 P$HKjv7^9#  
2. KB O"G<?>w.Yr(9lg"s 1024 P$HKjv7^9#  
©
Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-79  
2. \Ii$VeG=.8csQ<rhjU1k+"r97^9 (lgKhCF  
O">NGP$9N=.8csQ<rQ97^9)#  
e-Njg,h/}rG-J$lg"^?Ob@7?jgr9YFBTG-k+  
I&+o+iJ$lgO"lgN3sTe<?<;QTK CD-ROM Ii$VN  
hjU1reoCFBT7FbiCF/@5$#  
79F`Wo  
\Ii$VNhjU1r+O9k0K"*H$N3sTe<?<,!N79F`  
WoKgCF$k+N'7F/@5$#  
v ^$/mWm;C5<: 80486 Je  
v RAM: 4 MB Je  
v 5.25 $sANG#91CH&Ii$V  
v IDE \3,HQD=G"k3H  
v btE;\3,HQD=G"k3H  
v Ii$V&Y$,HQD=G"k3H  
v !N*Zl<F#s0&79F`N&AN 1 D  
– Microsoft® Windows® 95  
– Microsoft Windows® 98  
– Microsoft® Windows NT® 4.0  
– Microsoft Windows 2000 Professional  
– Microsoft Windows Millennium Edition (Me)  
hj7$eNb@  
hjU1fK\GP$9r]n9k?a"!NmUv`riCF/@5$#  
v \Ii$VO5EKhj7CF/@5$#\Ii$VrnH7?j"Wbr  
?(kH"Ii$V&O&8s0btN=.tJr;}9k*=l,"j^  
9#  
v \GP$9O"3sTe<?<XNhjU1`w,0;9k^G"SEI_  
^K~l?^^K7F*$F/@5$#hjU1~N0nOG.BK^(^  
9#0/3HKhCF"EE$,_Q5lkD=-,"j^9#  
v E;1<Vkr5}K^~7J$G/@5$#3M/?<d\Ii$Vr;  
}9klg,"j^9#  
1-80  
48X-20X Internal IDE CD-ROM Drive: User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
\Ii$VN5L^  
3N^r2H7F"hjU1b@KPF/kFtrN'7F*$F/@5$#  
«1¬ XCI[s&8cC/# *<G#*POrT&KO"XCI[sr33K  
97~sG/@5$#  
«2¬ \je<`&3sHm<k# 3N@$dkO"\je<`r4a9kNK  
HQ7^9#  
«3¬ CD Hl$# CD Hl$O"CD rIi$VK;CH9kNKHQ7^  
9#  
«4¬ HQf$sG#1<?<# 3Ni$HO"\Ii$V,G<? CD rI_  
hC?j"*<G#* CD rF89kH*sKJj^9#  
«5¬ soQhjP7j# $8'/H/;CH&\?s,57/n07F$J$l  
gK"CD Hl$r$8'/H9kNKHQ7^9#  
«6¬ $8'/H/;CH&\?s# 3N\?sr!7F"CD Hl$r+$?  
j"D8?j7^9#  
\Ii$VNXL^  
3N^r2H7F"hjU1b@KPF/kFtrN'7F*$F/@5$#  
«1¬ =sQ_#  
«2¬ *<G#*PO3M/?<#3N3M/?<O" CD-ROM Ii$Vr*<  
G#*&"@W?<K\39kNKHQ5l^9#  
Q<H 1: $s9H<k*hSf<6<:&,$I 1-81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
«3¬ =.Ts#3liNTseN8csQ<N[VKhj"IDE P9GN  
CD-ROM Ii$VN%hgL,h^j^9#  
«4¬ IDE 3M/?<#\ CD-ROM Ii$Vr IDE 1<VkK\37^9#  
«5¬ DC E;3M/?<#DC E;3<Ir\ CD-ROM Ii$VK\37^  
9#  
\Ii$VNhjU1  
\ CD-ROM Ii$Vr3sTe<?<KhjU1kjgO"!NH*jG9#  
9FCW 1. 3sTe<?<r+/  
1. 3sTe<?<H\3GP$9r9YF*UK7^9#  
2. 3sTe<?<H9YFN\3GP$9NE;3<INWi0r07^9#  
3. 3sTe<?<N+P<rhj07^9#  
9FCW 2. Ii$Vr-q+ihjP9  
1. \Ii$V,~lilF$kSEI_^r+1k0K"=N^r"Iu5l  
F$J$b0LK/J/Hb 2 CV(l5;^9#3lKhCF"=NQC  
1<8HMN+iEE$,|n5l^9#  
2. \Ii$VrSEI_^+ihjP7^9#\Ii$VrV+J1lPJi  
J$lg"?iG@i+JLNe ((oNeJI) KSEI_^r_-"=  
NSEI_^NeK\Ii$VrV-^9#  
9FCW 3. IDE ]<Hr*r9k  
77$?$WN3sTe<?<Nlg"Lo 2 DN IDE ]<H,"j"F]  
<H, 2 fNGP$9r5]<H7^9#lLK"1 DN IDE ]<H,Wi  
$^j< IDE ]<HH7FO<I&G#9/K\37"b&l}N IDE ]<  
H,;+s@j<&]<HHJj^9#*r7? IDE ]<HH1<VkLVK  
hCF"\Ii$VGHQ9k=.8csQ<,h^j^9#  
v IDE ]<H, 2 D"klg"\ CD-ROM Ii$Vr"79F`&\<I+  
IDE "@W?<eN;+s@j< IDE ]<HK\37^9#\ CD-ROM I  
i$V,;+s@j< IDE ]<HeN#lNGP$9G"klg"^9?<  
K_j7^9#\ CD-ROM Ii$V,;+s@j<&]<HeN 2 f\N  
GP$9G"klgO"9l<VK_j7^9#  
v \ CD-ROM Ii$VrWi$^j< IDE ]<H (O<I&G#9/^?O  
>Nb.GP$9H18]<H) K\37J1lPJiJ$lgO"\  
CD-ROM Ii$Vr9l<VK_j7"hjb.NGP$9r^9?<K_  
j7^9#lgKhCFO"181<VkeG9l<V&GP$9r\39  
kH-KO<I&G#9/N=._jMrV9l<V,8_9k^9?<W  
KQ97J1lPJiJ$3H,"j^9#>NGP$9eGN=.8cs  
Q<N_jN\YKD$FO"*H$N3sTe<?<+:vNGP$9K  
U0NqAr2H7F/@5$#  
1-82  
48X-20X Internal IDE CD-ROM Drive: User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
v ltN IBM J0N3sTe<?<GO"1<Vk*rN_jM,5]<H5  
lF$kbNb"j^9#3liN3sTe<?<GO"1<VkeNGP  
$9NLVKhCF"=NGP$9,^9?<+9l<V+,h^j^9#  
*H$N3sTe<?<,3N_jMr5]<H9k+I&+N'9kK  
O"*H$N3sTe<?<KU0NqAr2H7F/@5$#  
9FCW 4. =.8csQ<r_j9k  
^GO"^9?< «1¬ _jM"9l<V «2¬ _jM"*hS1<Vk*r «3¬  
_jMr(7F$^9#\ CD-ROM Ii$Vr=.9kKO"9FCW 3 G  
*r7?_jMKP~9kTsN;CHNeK8csQ<rV-^9#1-82Z<  
v \ CD-ROM GP$9r^9?<H7F=.9klg"8csQ<r^9?  
< «1¬ K_j7^9#(\Ii$VO"PY~K3N_jKJCF$^9#)  
IDE ]<HeK 2 f\NGP$9,"klgO"=NGP$9,9l<VH  
7F=.5lF$k+N'7^9#  
v \ CD-ROM GP$9r9l<VH7F=.9klg"8csQ<r9l<  
V «2¬ K_j7^9#IDE ]<HeNb&l}NGP$9,^9?< (^?  
O9l<V,8_9k^9?<) H7F=.5lF$k+N'7^9#  
v \ CD-ROM GP$9r1<Vk*rH7F=.9klg"8csQ<r1  
<Vk*r «3¬ K_j7^9# IDE ]<HeKLNGP$9,"klg  
O"2 f\NGP$9b1<Vk*rQK=.5lF$k+N'7F/@5  
$#  
9FCW 5. \Ii$VrY$KhjU1k  
M8v`: ,:"*W7gs&QC1<8N M3 x 5 mm hjU1QM8r  
4HQ/@5$#HQ9kM8,9a.kH"\Ii$Vr;}9k*=l,"  
j^9#  
\ CD-ROM Ii$VO"3sTe<?<bKD"#"IAiN~-KbhjU  
1il^9#\Ii$VrDKhjU1klg"Ii$V&Hl$rD8k0  
K"\Ii$VK~l? CD rGj9k,W,"j^9#=&7J$H"\  
CD-ROM Ii$V,=N CD r57/I_hlJ/Jj^9#DKhjU1?  
Ii$VbG CD rGj9k}!KD$F\7/O"1-87Z<8NXCD N;C  
HYKJsG/@5$#  
Q<H 1: $s9H<k*hSf<6<:&,$I 1-83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. \Ii$VrY$NfK^~7^9#*H$N3sTe<?<KhCFO"  
-1uVrhjU1kNKCLJjg,Wa5lklg,"j^9#5iK  
\7$X(KD$FO"*H$N3sTe<?<KU0NqAr2H7F/  
@5$#  
2. Ii$V&Y$NM8jr"Ii$V&O&8s0^?OhjU1bqbN  
M83U-NjHLVr=m(^9#=NeK"M8rK/L7F_F"=  
NLVrA'C/7^9#Lo"=l>lN&K 2 \NM8rHQ7^9#  
3. LVgo;,57$+N'7F+i"M8ryaF\Ii$VrGj7^  
9#-D/yaa.J$h&K7F/@5$#  
9FCW 6. 1<Vkr\Ii$VK\39k  
!Nh&K7F"1<Vkr\ CD-ROM Ii$VK\37^9#  
1. *<G#*&"@W?<,"klg"QC1<8K^^lF$k*<G#  
*&1<Vkr+D1F"IN1<Vk,"*<G#*&"@W?<eN  
CD *<G#*~O]<HKGb,g9k+r=G7^9#*r7?*<G  
#*&1<VkNl}N<rGP$9&*<G#*PO3M/?< «1¬ K\  
37"1<VkN>}N<r*<G#*&"@W?<N CD *<G#*~O  
]<HK\37^9#-h"[Jk*<G#*&"@W?<rHQ9klg  
N?aK"b& 1 \N1<VkOHCF*$F/@5$#  
2. 40 Ts IDE 1<Vk&3M/?< «2¬ r"\Ii$VeN IDE 3M/?  
<K\37^9#1<Vkr"',15l?&,E;1<Vk&3M/?<  
«3¬ KGba/Jkh&KLVgo;7^9# IDE ]<HK1<Vk,\  
35lF$J$lg"^?O IDE 1<VkeKGP$9&3M/?<, 1  
D7+J$lg"3N*W7gsHloKs!5l? IDE 1<VkrHQ  
7^9#  
3. 4 TsE;1<Vk «3¬ r"GP$9N DC E;3M/?<K\37^  
9#  
9FCW 7. O<I&'"NhjU1r0;9k  
1. \Ii$V,7C+jHhjU1il"3M/?<,57/\35lF$k  
+N'7^9#  
1-84  
48X-20X Internal IDE CD-ROM Drive: User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. 1<Vk,3sTe<?<N+P<NYbKJCF$?j"E;!=NU!  
sN),dLwP)r827F$J$+N+a^9#  
3. 3sTe<?<&+P<r5LjhjU1^9#  
4. GP$9r9YFF\37"-<\<I"^&9"bK?<JI"hj07  
?D=-N"kGP$9rA'C/7^9#  
5. E;3<Ir9YFE;3s;sHK\37^9#  
9FCW 8. 3sTe<?<N=.r979k  
O<I&'"NhjU1r0;7?i"3sTe<?<rFO07^9#Lo"  
=.;CH"CWpshL,=(5l^9#3NhL,=(5lJ$lgO"*  
H$N3sTe<?<NqAr2H7F"=.^?O;CH"CW&f<F#j  
F#<&Wm0i`XN"/;9}!rN'7F/@5$#  
[HsIN IBM 3sTe<?<GO=.psr=(9kKO"O0~K F1 r  
!7^9#3NpsN97rN'7"Q9r]I7F*;7^9#  
m: IDE ]<H, 1 D7+J$?$WN3sTe<?<NfKO"=.;CH  
"CWpsr=(9kH-K"CD-ROM Ii$Vpsr=(7J$bN,  
"j^9#3Nh&Ju7Gb"hjU1,57/0;7F$kBj"\  
CD-ROM Ii$VrHQG-^9#  
9FCW 9. GP$9&Ii$P<r$s9H<k9k  
3N;/7gsGO"HQ7F$k*Zl<F#s0&79F`Kp$F"\  
CD-ROM Ii$VQNGP$9&Ii$P<N$s9H<k}!KD$Fb@  
7^9#  
m: f<6<KhCF"Wo,[JCF$^9#3N*Zl<F#s0&79F  
`NGP$9&Ii$P<_jMO+9?^$:G-^9#3N;/7gs  
N$s9H<kb@G(7?GU)kHN_jMGO"*H$N3sTe<  
?<,&^/!=7J$lg"GP$9&Ii$P<N=._jMN+9?  
^$:KD$FNpsO" A-1 Z<8NXAppendix A. Customizing device  
driver configuration settingsYr2H7F/@5$#  
Windows 95"Windows 98"Windows NT"Windows 2000"*hS  
Windows Me QNGP$9&Ii$P<  
Windows 98 *hS Windows Me O"CD-ROM Ii$Vr+0*K!P7"$  
s9H<khLr=(7^;s#*Zl<F#s0&79F`,+O5l?eK  
$s9H<khL,=(5l?i"hLNX(K>$"GP$9&Ii$P<r  
$s9H<k7F/@5$#\7/O"*H$N*Zl<F#s0&79F`K  
U0NqAr2H7F/@5$#  
Q<H 1: $s9H<k*hSf<6<:&,$I 1-85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ii$VNHQHj~l  
3N;/7gsKO"CD N57$j~l*hS\ CD-ROM Ii$VNj~l  
*hS`nKD$FNX(,-\5lF$^9#  
CD Nj~l  
CD Ob)YaG#"G9#I_hjD=JuVK]D?aK"5EKhj7  
$"oK-l$K7F*/,W,"j^9#*H$N CD Nw?rdP9?a  
K"!NmUv`riCF/@5$#  
M8v`: CD r_~}~KU/HG<?,:olk*=l,"j^9#  
v CD O"o^?Of{Njr}CFhj7CF/@5$#CD NG<?LKO  
(lJ$G/@5$#  
v [3j^?OXfrhj|/KO"@i+/"1PNJ$[G CD rf{+  
ioK~+CFU$F/@5$#  
v =LK-~7J$G/@5$#  
v CD r>M|wK"FJ$G/@5$#  
v TNN/j<J<rHQ7F CD r/j<Ks07J$G/@5$#  
v CD rJ2J$G/@5$#  
CD-ROM Ii$VNj~l  
0nfN CD-ROM Ii$Vr]n9k?aK"J<NmUv`riCF/@5  
$#  
v Ii$Vr\09k0K"CD rIi$V+ihjP7F/@5$#  
v Ii$VK[*r^~7J$G/@5$#  
v Ii$V&+P<rhj07?j"Ii$Vr]i7h&H7J$G/@5  
$#  
v !NINroNbHGbIi$VrT07J$G/@5$#  
1-86  
48X-20X Internal IDE CD-ROM Drive: User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
b9"b>Y"^?O>M|w  
aYN60"^cJWb"^?O9$?L  
aYN[3j  
CD N;CH  
#KhjU1il? CD-ROM Ii$VK CD r;CH9kKO"!Nh&K  
7F/@5$#  
1. $8'/H/;CH&\?sr!7^9#Hl$,Ii$V+i9i$I7F  
PF-^9#  
2. CD r CD Hl$KiYkreK~1F^~7^9#  
3. $8'/H/;CH&\?sr!9+"Hl$r=CH!7~lF"CD Hl  
$r D8^9#  
M8v`: Hl$r5}K+3&H7J$G/@5$#CD Hl$K[*r^  
~7J$G/@5$#  
Q<H 1: $s9H<k*hSf<6<:&,$I 1-87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DKhjU1il? CD-ROM Ii$VK CD r;CH9kKO"!Nh&K  
7F/@5$#  
1. $8'/H/;CH&\?sr!7^9#  
2. ^r+F"*H$N CD Hl$HfS7F/@5$#  
v *H$N CD Hl$,8N^KwF$klgO"CD No, CD Hl$  
eN?VNb&KJkh&K CD r5EK^~7^9#3liNWi9A  
C/N?VO CD Nor$$"jjNLVK]}7^9#?VOHl$+  
NKhjU1ilF*j"\09k3HOG-^;s#  
v *H$N CD Hl$,&N^KwF$klgO" CD rHl$K^~  
7"\0D=J?Vr0}K=CH!7F CD rjjNLVK]}7^  
9#  
3. $8'/H/;CH&\?sr!9+"Hl$r=CH!7~lF"CD Hl  
$rD8^9#  
1-88  
48X-20X Internal IDE CD-ROM Drive: User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD rj0GhjP9  
$8'/H/;CH&\?sr!7F"Hl$,9i$I7FPF3J$lg  
O"3sTe<?<NE;rZCF/@5$#g?N/jCWr^C90K-P  
7F"<^K(9h&JD<kK7^9#^C90K-P7?<O"/J/Hb  
45 mm O-SF$k,W,"j^9#-P7?<rIi$VN0LK"kso  
QhjP7jK^~7^9 (1-81 Z<8NX\Ii$VN5L^Yr2H7F/  
@5$ )#Hl$,+/^G"/jCWrjK!7~l^9#CD rhjP;k  
h&KJk^G"Hl$r =CHz-P7^9#  
45 mm  
1.8 in  
*<G#* CD NF8  
*<G#* CD rF89kKO"*H$N3sTe<?<K*<G#* CD W  
m0i`r$s9H<k7F*/,W,"j^9#Windows 98"Windows  
Me"Windows NT"*hS Windows 2000 "Wj1<7gsKO"*<G#*  
CD Wl$d<&Wm0i`,H_~^lF$^9#  
*<G#*F8=UH&'"NHQ!KD$F\7/O"*H$N*Zl<F#  
s0&79F`^?O3sTe<?<KU0NqAr2H7F/@5$#  
Windows 95"Windows 98"Windows NT 4.0"Windows  
2000"^?O Windows Me  
*<G#*&f<F#jF#<rHQ9kKO"!Nh&K7^9#  
1. 3sTe<?<NE;r^@*sK7F$J$lgO"33G*sK7"*  
Zl<F#s0&79F`rO07^9#  
2. *<G#* CD r CD-ROM Ii$VK^~7^9#  
3. CD NF8,+O7^9#CD ,F8r+O7J$+"*<G#*Kdj,  
"klgO"*H$N*<G#*&"@W?<^?O3sTe<?<KU0  
NqArA'C/7F"djrhpsr4Y^9#  
G<? CD NHQ  
G<? CD O"G<?&U!$k"2<`"^?O"Wj1<7gsr}?9  
k3H,G-^9#  
Windows 95"Windows 98"Windows NT 4.0"Windows  
2000"^?O Windows Me  
G<? CD rI_hkKO"!Nh&K7^9#  
Q<H 1: $s9H<k*hSf<6<:&,$I 1-89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. 3sTe<?<NE;r^@*sK7F$J$lgO"33G*sK7"*  
Zl<F#s0&79F`rO07^9#  
2. G<? CD r CD-ROM Ii$VK^~7^9#?/NWm0i` CD  
O"3N~@G+0*K+O5l^9#CD ,+0*K+O5lJ$lg  
O"9FCW 3 KJ_^9#  
3. V^$ 3sTe<?Wr@Vk/jC/7^9#  
4. VCD-ROMW"$3s,=(5lk3HrN'7^9#  
5. VCD-ROMW"$3sr@Vk/jC/7^9#  
6. CD eNU!$kr=(G-k3HrN'7^9#  
VCD-ROMW"$3sr*r9k+"G<?r=(9k3H,G-J$lgO"  
B-1 Z<8NXAppendix B. Problem solvingYr2H9k+" C-1 Z<8N  
XAppendix C. Help and service informationYG5<S9psr2H7^9#  
1-90  
48X-20X Internal IDE CD-ROM Drive: User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A. Customizing device driver configuration  
settings  
This section contains information about how to customize and configure device  
drivers.  
Changing the Windows 98 and Windows Me device-driver  
settings  
Windows 98 and Windows Me have two device-driver configuration  
parameters: Auto Insert Notify and DMA. These are ordinarily setup  
automatically by Windows. If you need to set them up, the following  
procedures will help.  
The Auto Insert Notify parameter enables the computer to start audio CD  
software as soon as a CD is inserted into the CD-ROM drive.  
The DMA parameter improves computer performance by having the computer  
DMA controller handle moving data from the CD to memory, freeing the  
computer microprocessor to perform more important tasks. For example,  
activating DMA might make movies and games run more smoothly because  
the microprocessor will have more time to perform video tasks.  
To change these parameter settings from Windows 98 or Windows Me, do the  
following steps. (This also pertains to setting Auto Insert Notification for  
Windows NT 4.0.)  
1. Click Start-->Settings-->Control Panel.  
2. Double-click System.  
3. Click the Device Manager tab; double-click CD-ROM; select the CD-ROM  
driver listed; then click the Properties button.  
4. Click the Settings tab.  
5. Under Options, click the box next to either Auto Insert Notification or  
DMA.  
6. Click OK.  
Changing the Windows 2000 desktop device driver  
To change the Windows 2000 desktop device driver, follow these steps:  
1. Click Start-->Settings-->Control Panel.  
2. Double-click System.  
3. Click the Hardware tab.  
4. Click the Device Manager button.  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A-1  
 
5. Click the IDE ATA/ATAPI controller to open the tree.  
6. Double-click the device that corresponds to the port of your CD-ROM. It  
will either be Primary IDE or Secondary IDE.  
7. Click the Advanced Settings tab.  
8. Select the Transfer Mode pull-down and select DMA if available.  
9. Click OK.  
10. Click Close to close the System Properties window. A message displays,  
informing you that the system settings have changed.  
A-2 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B. Problem solving  
Computer problems can be caused by hardware, software, or user error. Using  
the information in this section, you might be able to solve problems yourself or  
gather helpful information you can pass on to a service technician. You might  
also need to refer to your computer, operating-system, or audio-adapter  
publications.  
Problem descriptions  
Review the following list for any problem descriptions that might fit your  
situation.  
Your computer or CD-ROM drive does not operate correctly  
or the Busy indicator light does not come on.  
Take the following actions:  
1. Make sure that the CD is inserted with the label side up or facing out if the  
drive is installed vertically.  
2. Make sure that all devices are properly connected to the computer and the  
electrical outlet.  
3. Turn off the computer, unplug the cables from the electrical outlets for your  
computer and all attached devices, and remove the computer cover.  
4. Make sure that all power and IDE cables are securely attached. Disconnect  
the IDE cable and check for bent or misaligned pins. If you do not find any  
problems, reconnect the cable. Replace the computer cover, and reattach all  
cables and power cords. Turn on the computer and attempt to open the CD  
tray by pressing the Eject/Load button. If the tray fails to open and the  
Busy indicator light does not display, turn off the computer and try  
replacing the 4-pin dc power cable.  
5. Make sure that the color-coded edge on the IDE cable aligns with pin 1 on  
the IDE port and is closest to the power cable on the CD-ROM drive. See  
6. Make sure that the IDE cable is connected to the correct IDE port  
information.  
7. Check the CD-ROM drive and any other device on the IDE cable for the  
proper jumper configuration settings. See Step 4. Setting the configuration  
jumperon page 1-5 for more information.  
8. Check to see if the middle connector on the IDE cable is attached to the  
IDE port on the system board. If it is, remove the connector and reattach  
the cable correctly. The middle port is used only if you are connecting two  
devices to the IDE port. If there are two devices on the IDE port, attach the  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B-1  
 
connector at one end of the cable to the IDE port. Attach the CD-ROM  
drive or any other slower device to the middle connector, and attach the  
other end connector to your hard disk drive or other device. If you are  
connecting only one device to an IDE port, attach one end of the cable to  
the IDE port and the other end connector to the device; leave the middle  
connector open.  
You cannot access the CD-ROM drive, or the CD-ROM icon  
does not display (Windows 95, Windows 98, Windows NT  
4.0, Windows 2000, or Windows Me)  
When the CD-ROM drive is installed, a CD-ROM icon appears in theMy  
Computerwindow.  
To verify that the icon is there do the following:  
1. Double-click My Computer.  
2. Look for an icon for the CD-ROM drive.  
If a CD-ROM icon is not present in the window that displays:  
1. Make sure that the drive has been properly installed.  
2. Make sure that the configuration jumper is set properly. See Step 4. Setting  
3. Restart your computer.  
If the device icon is still not present, check cable connections and configuration  
jumper settings on other devices, and resolve any conflicts that might exist.  
If a drive icon is still not found after you try the above procedures, continue  
with the following steps.  
If you are using Windows 95, Windows 98, or Windows Me follow these  
instructions:  
1. Click Start-->Settings-->Control Panel.  
2. Double click System.  
3. Click the Device Managertab.  
4. At the top of the box, click View Devices by Type.  
5. Double-click Hard Disk Controllersto list the available controllers. Make  
sure that there are no conflicts with the controller by doing the following:  
a. Click to select a controller from the list.  
b. Click the Properties button.  
c. On the General tab, under Device Status, there is a statement that  
indicates whether that controller is working properly. Click OK to  
return to the Device Manager tab in the System Properties window.  
B-2 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Check to see if there is a conflict between devices by doing the following:  
a. In the System Properties window, double-click CD-ROM to list the  
available devices, and click to select one from the list.  
b. Click the Properties button.  
c. Under Device Status, there is a statement indicating whether the  
CD-ROM device is working properly. If there is a conflict and one or  
both of the devices are nonworking, refer to Appendix C. Help and  
7. Click OK in the System Properties window.  
8. Shut down and restart the computer.  
If you are using Windows NT 4.0, follow these instructions:  
1. Click Start --> Settings --> Control Panel.  
2. Double-click SCSI Adapters.  
3. Click the Device tab.  
4. Check to see that neither controller has conflicts by doing the following:  
a. Click to select a controller.  
b. Click Properties.  
c. Click the Card Info tab; under the Device Status section, there is a  
statement indicating whether the controller is working properly.  
d. Click OK to return to the SCSI Adapter window.  
e. Click to select another controller.  
f. Click the Card Infotab; under the Device Status section, check the  
statement to see whether the controller is working properly.  
g. If you have more than two SCSI controllers, use the above steps to  
check the device status of the other controller(s).  
h. If you discover a conflict and one or more of the controllers is not  
If you are using Windows 2000, follow these steps:  
1. Click Start --> Settings --> Control Panel.  
2. Click System.  
3. Click Hardware tab.  
4. Click the Device Managerbutton.  
5. Double-click Hard Disk Controllers to list the available controllers. Look  
for yellow circles with an exclamation point to indicate any conflicts. If  
conflicts occur, see Appendixes B or C for further instruction.  
Appendix B. Problem solving B-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The CD-ROM drive is not recognized by the operating  
system, or drive performance is erratic.  
Some computers, such as IBM PS/ValuePoint models 6472, 6482, 6484, 6492,  
and 6494, have a compatible mode and a high performance mode for mass storage  
devices. Normally, the CD-ROM drive functions better under high performance  
mode.  
However, if your drive is not functioning properly in that mode, you might  
need to use compatible mode.  
Check the configuration-setup information for your computer.  
1. Access your configuration utility program.  
2. Select Devices.  
3. Scroll down to the Mass Storage Devices section.  
4. Mass Storage Devices contains the entries Primary IDE Mode and  
Secondary IDE mode. These entries are used to set the performance mode  
of each IDE port. Set the mode to Compatible for the port on which you  
installed your CD-ROM drive.  
Other IBM and non-IBM computers might have similar settings. Check to see if  
your BIOS or configuration-setup utility provides for compatible and high  
performancemodes for IDE performance. For these computers, use the compatible  
mode for slower IDE devices, such as this CD-ROM drive. Refer to the  
documentation that comes with your computer for additional details on  
selecting IDE performance modes. Many older computers will not have a  
selection of IDE performance modes. If the CD-ROM drive still does not read  
the data CD, the CD-ROM drive might be defective.  
The CD cannot be read.  
Consider the following actions.  
v The CD might be dirty; clean it as described in Caring for a CDon  
v The CD might be defective; try another CD.  
v The CD is not ISO-9660 or High Sierra Group (HSG) compatible. Check with  
your place of purchase.  
The CD does not play sound.  
Consider the following actions.  
v Check that you are using an audio CD and not a data CD.  
v Adjust the volume control on the drive. See Front view of the driveon  
page 1-3 if headphones are connected to the front of the drive.  
B-4 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v Adjust the audio-adapter volume control. See the documentation that comes  
with your sound adapter and audio-CD player program.  
v Turn off the computer, unplug the cables from the electrical outlets for your  
computer and all attached devices, and remove the computer cover. Check  
that the audio-signal cable connects the CD-ROM with the audio adapter.  
You receive a common error message.  
These are some common error messages and actions to take when they are  
displayed.  
v CDR-101  
The Not ready reading the drivesituation occurs if you try to access the  
CD-ROM drive before the drive is ready. The Busy indicator light comes on  
when you attempt to access the drive after loading a CD into the CD tray.  
Wait until the Busy indicator light turns off before attempting to access the  
drive.  
Appendix B. Problem solving B-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v CDR-103  
The CD in the CD-ROM drive is not a High Sierra or an ISO 9660 format.  
The CD-ROM drive does not support this format.  
The connectors on the audio cables provided do not fit the  
connector on your audio adapter.  
Some audio adapters might require special cable.s See the documentation that  
comes with your audio adapter.  
You might have to purchase separately an audio cable for the CD-ROM drive.  
The audio-out connector on the CD-ROM drive requires a MPC-2 compliant  
Molex 70066-G connector. (See Back view of the driveon page 1-3 to locate  
the audio connector.) If you are using an IBM computer or IBM audio adapter,  
assistance.  
The front headphone jack does not work (Windows 98,  
Windows 2000, and Windows Me).  
If the front headphone jack does not work, do the following steps:  
1. Right-click on My Computer.  
2. Select Properties.  
3. Select the Device Manager tab.  
4. Open the tree to CD-ROM.  
5. Double-click on the device or select it and press the Properties button.  
6. Select the Properties tab.  
7. Uncheck the Enable Digital audio for this CD-ROM devicebox.  
B-6 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C. Help and service information  
This section contains information on how to obtain online and telephone  
technical support.  
Online technical support  
Online technical support is available during the life of your product. Online  
assistance can be obtained through the Personal Computing Support Web site.  
Online technical support  
IBM Personal Computing Support Web site http://www.ibm.com/pc/support  
During the warranty period, assistance for replacement or exchange of  
defective components is available. In addition, if your IBM option is installed  
in an IBM computer, you might be entitled to service at your location. Your  
technical support representative can help you determine the best alternative.  
Telephone technical support  
Installation and configuration support through the HelpCenter will be  
withdrawn or made available for a fee, at IBMs discretion, 90 days after the  
option has been withdrawn from marketing. Additional support offerings,  
including step-by-step installation assistance, are available for a nominal fee.  
To assist the technical support representative, have available as much of the  
following information as possible:  
v Option name  
v Option number  
v Proof of purchase  
v Computer manufacturer, model, serial number (if IBM), and manual  
v Exact wording of the error message (if any)  
v Description of the problem  
v Hardware and software configuration information for your system  
If possible, be at your computer. Your technical support representative might  
want to walk you through the problem during the call.  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C-1  
 
For the support telephone number and support hours by country, refer to the  
following table or to the enclosed technical support insert. Support phone  
numbers are also available by clicking HelpCenter phone list on the IBM  
support Web page at  
http://www.ibm.com/pc/support  
If the number is not provided, contact your IBM reseller or IBM marketing  
representative. Response time may vary depending on the number and nature  
of the calls received.  
Support 24 hours a day, 7 days a week  
Canada (Toronto only)  
Canada (all other)  
416-383-3344  
1-800-565-3344  
1-800-772-2227  
U.S.A. and Puerto Rico  
C-2 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D. Product warranties and notices  
Warranty Statements  
The warranty statements consist of two parts: Part 1 and Part 2. Part 1 varies  
by country. Part 2 is the same for both statements. Be sure to read both the  
Part 1 that applies to your country and Part 2.  
v United States, Puerto Rico, and Canada (Z125-4753-05 11/97) (see IBM  
v Worldwide except Canada, Puerto Rico, Turkey, and United States  
v Worldwide Country-Unique Terms (see Part 2 - Worldwide  
IBM Statement of Limited Warranty for United States, Puerto  
Rico, and Canada (Part 1 - General Terms)  
This Statement of Warranty includes Part 1 - General Terms and Part 2 -  
Country-unique Terms.The terms of Part 2 may replace or modify those of Part  
1.The warranties provided by IBM in this Statement of Warranty apply only to  
Machines you purchase for your use, and not for resale, from IBM or your reseller.  
The term Machinemeans an IBM machine, its features, conversions, upgrades,  
elements, or accessories, or any combination of them. The term Machinedoes not  
include any software programs, whether pre-loaded with the Machine, installed  
subsequently or otherwise. Unless IBM specifies otherwise, the following warranties  
apply only in the country where you acquire the Machine. Nothing in this Statement  
of Warranty affects any statutory rights of consumers that cannot be waived or limited  
by contract. If you have any questions, contact IBM or your reseller.  
Machine - 48X-20X CD-ROM Drive  
Warranty period* - One (1) year  
* Contact your place of purchase for warranty service information. Some IBM Machines are  
eligible for on-site warranty service depending on the country where service is performed.  
The IBM Warranty for Machines  
IBM warrants that each Machine 1) is free from defects in materials and  
workmanship and 2) conforms to IBMs Official Published Specifications. The  
warranty period for a Machine is a specified, fixed period commencing on its  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-1  
 
Date of Installation. The date on your sales receipt is the Date of Installation,  
unless IBM or your reseller informs you otherwise.  
During the warranty period IBM or your reseller, if approved by IBM to  
provide warranty service, will provide repair and exchange service for the  
Machine, without charge, under the type of service designated for the Machine  
and will manage and install engineering changes that apply to the Machine.  
If a Machine does not function as warranted during the warranty period, and  
IBM or your reseller are unable to either 1) make it do so or 2) replace it with  
one that is at least functionally equivalent, you may return it to your place of  
purchase and your money will be refunded. The replacement may not be new,  
but will be in good working order.  
Extent of Warranty  
The warranty does not cover the repair or exchange of a Machine resulting  
from misuse, accident, modification, unsuitable physical or operating  
environment, improper maintenance by you, or failure caused by a product for  
which IBM is not responsible. The warranty is voided by removal or alteration  
of Machine or parts identification labels.  
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND  
REPLACE ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR  
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE. THESE WARRANTIES GIVE YOU  
SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS  
WHICH VARY FROM JURISDICTION TO JURISDICTION. SOME  
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION  
OF EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION  
OR LIMITATION MAY NOT APPLY TO YOU. IN THAT EVENT, SUCH  
WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY  
PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.  
Items Not Covered by Warranty  
IBM does not warrant uninterrupted or error-free operation of a Machine.  
Unless specified otherwise, IBM provides non-IBM machines WITHOUT  
WARRANTIES OF ANY KIND.  
Any technical or other support provided for a Machine under warranty, such  
as assistance via telephone with how-toquestions and those regarding  
Machine set-up and installation, will be provided WITHOUT WARRANTIES  
OF ANY KIND.  
D-2 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty Service  
To obtain warranty service for the Machine, contact your reseller or IBM. In the  
United States, call IBM at 1-800-772-2227. In Canada, call IBM at  
1-800-565-3344. (In Toronto, call 416-383-3344.) You may be required to present  
proof of purchase.  
IBM or your reseller provides certain types of repair and exchange service,  
either at your location or at a service center, to keep Machines in, or restore  
them to, conformance with their Specifications. IBM or your reseller will  
inform you of the available types of service for a Machine based on its country  
of installation. IBM may repair the failing Machine or exchange it at its  
discretion.  
When warranty service involves the exchange of a Machine or part, the item  
IBM or your reseller replaces becomes its property and the replacement  
becomes yours. You represent that all removed items are genuine and  
unaltered. The replacement may not be new, but will be in good working order  
and at least functionally equivalent to the item replaced. The replacement  
assumes the warranty service status of the replaced item.  
Any feature, conversion, or upgrade IBM or your reseller services must be  
installed on a Machine which is 1) for certain Machines, the designated,  
serial-numbered Machine and 2) at an engineering-change level compatible  
with the feature, conversion, or upgrade. Many features, conversions, or  
upgrades involve the removal of parts and their return to IBM. A part that  
replaces a removed part will assume the warranty service status of the  
removed part.  
Before IBM or your reseller exchanges a Machine or part, you agree to remove  
all features, parts, options, alterations, and attachments not under warranty  
service.  
You also agree to  
1. ensure that the Machine is free of any legal obligations or restrictions that  
prevent its exchange;  
2. obtain authorization from the owner to have IBM or your reseller service a  
Machine that you do not own; and  
3. where applicable, before service is provided  
a. follow the problem determination, problem analysis, and service request  
procedures that IBM or your reseller provides,  
b. secure all programs, data, and funds contained in a Machine,  
c. provide IBM or your reseller with sufficient, free, and safe access to  
your facilities to permit them to fulfill their obligations, and  
d. inform IBM or your reseller of changes in a Machines location.  
Appendix D. Product warranties and notices D-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IBM is responsible for loss of, or damage to, your Machine while it is 1) in  
IBMs possession or 2) in transit in those cases where IBM is responsible for  
the transportation charges.  
Neither IBM nor your reseller is responsible for any of your confidential,  
proprietary or personal information contained in a Machine which you return  
to IBM or your reseller for any reason. You should remove all such information  
from the Machine prior to its return.  
Production Status  
Each IBM Machine is manufactured from new parts, or new and used parts. In  
some cases, the Machine may not be new and may have been previously  
installed. Regardless of the Machines production status, IBMs appropriate  
warranty terms apply.  
Limitation of Liability  
Circumstances may arise where, because of a default on IBMs part or other  
liability, you are entitled to recover damages from IBM. In each such instance,  
regardless of the basis on which you are entitled to claim damages from IBM  
(including fundamental breach, negligence, misrepresentation, or other contract  
or tort claim), IBM is liable for no more than  
1. damages for bodily injury (including death) and damage to real property  
and tangible personal property; and  
2. the amount of any other actual direct damages, up to the greater of U.S.  
$100,000 (or equivalent in local currency) or the charges (if recurring, 12  
monthscharges apply) for the Machine that is the subject of the claim.  
This limit also applies to IBMs suppliers and your reseller. It is the  
maximum for which IBM, its suppliers, and your reseller are collectively  
responsible.  
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE  
FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES  
(OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE); 2)  
LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR 3) SPECIAL,  
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC  
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR  
SAVINGS), EVEN IF IBM, ITS SUPPLIERS OR YOUR RESELLER IS  
INFORMED OF THEIR POSSIBILITY. SOME JURISDICTIONS DO NOT  
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR  
EXCLUSION MAY NOT APPLY TO YOU.  
D-4 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IBM Statement of Warranty Worldwide except Canada,  
Puerto Rico, Turkey, United States (Part 1 - General Terms)  
This Statement of Warranty includes Part 1 - General Terms and Part 2 -  
Country-unique Terms.The terms of Part 2 may replace or modify those of Part  
1. The warranties provided by IBM in this Statement of Warranty apply only to  
Machines you purchase for your use, and not for resale, from IBM or your reseller.  
The term Machinemeans an IBM machine, its features, conversions, upgrades,  
elements, or accessories, or any combination of them. The term Machinedoes not  
include any software programs, whether pre-loaded with the Machine, installed  
subsequently or otherwise. Unless IBM specifies otherwise, the following warranties  
apply only in the country where you acquire the Machine. Nothing in this Statement  
of Warranty affects any statutory rights of consumers that cannot be waived or limited  
by contract. If you have any questions, contact IBM or your reseller.  
Machine - 48X-20X CD-ROM Drive  
Warranty period* - One (1) year  
* Contact your place of purchase for warranty service information. Some IBM Machines are  
eligible for on-site warranty service depending on the country where service is performed.  
The IBM Warranty for Machines  
IBM warrants that each Machine 1) is free from defects in materials and  
workmanship and 2) conforms to IBMs Official Published Specifications. The  
warranty period for a Machine is a specified, fixed period commencing on its  
Date of Installation. The date on your sales receipt is the Date of Installation,  
unless IBM or your reseller informs you otherwise.  
During the warranty period IBM or your reseller, if approved by IBM to  
provide warranty service, will provide repair and exchange service for the  
Machine, without charge, under the type of service designated for the Machine  
and will manage and install engineering changes that apply to the Machine.  
If a Machine does not function as warranted during the warranty period, and  
IBM or your reseller are unable to either 1) make it do so or 2) replace it with  
one that is at least functionally equivalent, you may return it to your place of  
purchase and your money will be refunded. The replacement may not be new,  
but will be in good working order.  
Extent of Warranty  
The warranty does not cover the repair or exchange of a Machine resulting  
from misuse, accident, modification, unsuitable physical or operating  
environment, improper maintenance by you, or failure caused by a product for  
Appendix D. Product warranties and notices D-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
which IBM is not responsible. The warranty is voided by removal or alteration  
of Machine or parts identification labels.  
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND  
REPLACE ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR  
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE. THESE WARRANTIES GIVE YOU  
SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS  
WHICH VARY FROM JURISDICTION TO JURISDICTION. SOME  
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION  
OF EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION  
OR LIMITATION MAY NOT APPLY TO YOU. IN THAT EVENT, SUCH  
WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY  
PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.  
Items Not Covered by Warranty  
IBM does not warrant uninterrupted or error-free operation of a Machine.  
Unless specified otherwise, IBM provides non-IBM machines WITHOUT  
WARRANTIES OF ANY KIND.  
Any technical or other support provided for a Machine under warranty, such  
as assistance via telephone with how-toquestions and those regarding  
Machine set-up and installation, will be provided WITHOUT WARRANTIES  
OF ANY KIND.  
Warranty Service  
To obtain warranty service for the Machine, contact your reseller or IBM. You  
may be required to present proof of purchase.  
IBM or your reseller provides certain types of repair and exchange service,  
either at your location or at a service center, to keep Machines in, or restore  
them to, conformance with their Specifications. IBM or your reseller will  
inform you of the available types of service for a Machine based on its country  
of installation. IBM may repair the failing Machine or exchange it at its  
discretion.  
When warranty service involves the exchange of a Machine or part, the item  
IBM or your reseller replaces becomes its property and the replacement  
becomes yours. You represent that all removed items are genuine and  
unaltered. The replacement may not be new, but will be in good working order  
and at least functionally equivalent to the item replaced. The replacement  
assumes the warranty service status of the replaced item.  
D-6 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Any feature, conversion, or upgrade IBM or your reseller services must be  
installed on a Machine which is 1) for certain Machines, the designated,  
serial-numbered Machine and 2) at an engineering-change level compatible  
with the feature, conversion, or upgrade. Many features, conversions, or  
upgrades involve the removal of parts and their return to IBM. A part that  
replaces a removed part will assume the warranty service status of the  
removed part.  
Before IBM or your reseller exchanges a Machine or part, you agree to remove  
all features, parts, options, alterations, and attachments not under warranty  
service.  
You also agree to  
1. ensure that the Machine is free of any legal obligations or restrictions that  
prevent its exchange;  
2. obtain authorization from the owner to have IBM or your reseller service a  
Machine that you do not own; and  
3. where applicable, before service is provided  
a. follow the problem determination, problem analysis, and service request  
procedures that IBM or your reseller provides,  
b. secure all programs, data, and funds contained in a Machine,  
c. provide IBM or your reseller with sufficient, free, and safe access to  
your facilities to permit them to fulfill their obligations, and  
d. inform IBM or your reseller of changes in a Machines location.  
IBM is responsible for loss of, or damage to, your Machine while it is 1) in  
IBMs possession or 2) in transit in those cases where IBM is responsible for  
the transportation charges.  
Neither IBM nor your reseller is responsible for any of your confidential,  
proprietary or personal information contained in a Machine which you return  
to IBM or your reseller for any reason. You should remove all such information  
from the Machine prior to its return.  
Production Status  
Each IBM Machine is manufactured from new parts, or new and used parts. In  
some cases, the Machine may not be new and may have been previously  
installed. Regardless of the Machines production status, IBMs appropriate  
warranty terms apply.  
Limitation of Liability  
Circumstances may arise where, because of a default on IBMs part or other  
liability, you are entitled to recover damages from IBM. In each such instance,  
regardless of the basis on which you are entitled to claim damages from IBM  
Appendix D. Product warranties and notices D-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(including fundamental breach, negligence, misrepresentation, or other contract  
or tort claim), IBM is liable for no more than  
1. damages for bodily injury (including death) and damage to real property  
and tangible personal property; and  
2. the amount of any other actual direct damages, up to the greater of U.S.  
$100,000 (or equivalent in local currency) or the charges (if recurring, 12  
monthscharges apply) for the Machine that is the subject of the claim.  
This limit also applies to IBMs suppliers and your reseller. It is the  
maximum for which IBM, its suppliers, and your reseller are collectively  
responsible.  
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE  
FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES  
(OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE); 2)  
LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR 3) SPECIAL,  
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC  
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR  
SAVINGS), EVEN IF IBM, ITS SUPPLIERS OR YOUR RESELLER IS  
INFORMED OF THEIR POSSIBILITY. SOME JURISDICTIONS DO NOT  
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR  
EXCLUSION MAY NOT APPLY TO YOU.  
Part 2 - Worldwide Country-Unique Terms  
ASIA PACIFIC  
AUSTRALIA: The IBM Warranty for Machines: The following paragraph is  
added to this Section: The warranties specified in this Section are in addition to  
any rights you may have under the Trade Practices Act 1974 or other  
legislation and are only limited to the extent permitted by the applicable  
legislation.  
Extent of Warranty: The following replaces the first and second sentences of  
this Section: The warranty does not cover the repair or exchange of a Machine  
resulting from misuse, accident, modification, unsuitable physical or operating  
environment, operation in other than the Specified Operating Environment,  
improper maintenance by you, or failure caused by a product for which IBM is  
not responsible.  
Limitation of Liability: The following is added to this Section: Where IBM is  
in breach of a condition or warranty implied by the Trade Practices Act 1974,  
IBMs liability is limited to the repair or replacement of the goods or the  
supply of equivalent goods. Where that condition or warranty relates to right  
to sell, quiet possession or clear title, or the goods are of a kind ordinarily  
D-8 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
acquired for personal, domestic or household use or consumption, then none  
of the limitations in this paragraph apply.  
PEOPLES REPUBLIC OF CHINA: Governing Law: The following is added to  
this Statement: The laws of the State of New York govern this Statement.  
INDIA: Limitation of Liability: The following replaces items 1 and 2 of this  
Section:  
1. liability for bodily injury (including death) or damage to real property and  
tangible personal property will be limited to that caused by IBMs  
negligence;  
2. as to any other actual damage arising in any situation involving  
nonperformance by IBM pursuant to, or in any way related to the subject  
of this Statement of Warranty, IBMs liability will be limited to the charge  
paid by you for the individual Machine that is the subject of the claim.  
NEW ZEALAND: The IBM Warranty for Machines: The following paragraph  
is added to this Section: The warranties specified in this Section are in addition  
to any rights you may have under the Consumer Guarantees Act 1993 or other  
legislation which cannot be excluded or limited. The Consumer Guarantees Act  
1993 will not apply in respect of any goods which IBM provides, if you require  
the goods for the purposes of a business as defined in that Act.  
Limitation of Liability: The following is added to this Section: Where  
Machines are not acquired for the purposes of a business as defined in the  
Consumer Guarantees Act 1993, the limitations in this Section are subject to the  
limitations in that Act.  
EUROPE, MIDDLE EAST, AFRICA (EMEA)  
The following terms apply to all EMEA countries.  
The terms of this Statement of Warranty apply to Machines purchased from an  
IBM reseller. If you purchased this Machine from IBM, the terms and  
conditions of the applicable IBM agreement prevail over this warranty  
statement.  
Warranty Service  
If you purchased an IBM Machine in Austria, Belgium, Denmark, Estonia,  
Finland, France, Germany, Greece, Iceland, Ireland, Italy, Latvia, Lithuania,  
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland or  
United Kingdom, you may obtain warranty service for that Machine in any of  
those countries from either (1) an IBM reseller approved to perform warranty  
service or (2) from IBM.  
Appendix D. Product warranties and notices D-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you purchased an IBM Personal Computer Machine in Albania, Armenia,  
Belarus, Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic, Georgia,  
Hungary, Kazakhstan, Kirghizia, Federal Republic of Yugoslavia, Former  
Yugoslav Republic of Macedonia (FYROM), Moldova, Poland, Romania, Russia,  
Slovak Republic, Slovenia, or Ukraine, you may obtain warranty service for  
that Machine in any of those countries from either (1) an IBM reseller  
approved to perform warranty service or (2) from IBM.  
The applicable laws, Country-unique terms and competent court for this  
Statement are those of the country in which the warranty service is being  
provided. However, the laws of Austria govern this Statement if the warranty  
service is provided in Albania, Armenia, Belarus, Bosnia and Herzegovina,  
Bulgaria, Croatia, Czech Republic, Federal Republic of Yugoslavia, Georgia,  
Hungary, Kazakhstan, Kirghizia, Former Yugoslav Republic of Macedonia  
(FYROM), Moldova, Poland, Romania, Russia, Slovak Republic, Slovenia, and  
Ukraine.  
The following terms apply to the country specified:  
EGYPT: Limitation of Liability: The following replaces item 2 in this Section:  
2. as to any other actual direct damages, IBMs liability will be limited to the  
total amount you paid for the Machine that is the subject of the claim.  
Applicability of suppliers and resellers (unchanged).  
FRANCE: Limitation of Liability: The following replaces the second sentence  
of the first paragraph of this Section: In such instances, regardless of the basis  
on which you are entitled to claim damages from IBM, IBM is liable for no  
more than: (items 1 and 2 unchanged).  
GERMANY: The IBM Warranty for Machines: The following replaces the first  
sentence of the first paragraph of this Section: The warranty for an IBM  
Machine covers the functionality of the Machine for its normal use and the  
Machines conformity to its Specifications.  
The following paragraphs are added to this Section: The minimum warranty  
period for Machines is six months.  
In case IBM or your reseller are unable to repair an IBM Machine, you can  
alternatively ask for a partial refund as far as justified by the reduced value of  
the unrepaired Machine or ask for a cancellation of the respective agreement  
for such Machine and get your money refunded.  
Extent of Warranty: The second paragraph does not apply.  
D-10 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty Service: The following is added to this Section: During the warranty  
period, transportation for delivery of the failing Machine to IBM will be at  
IBMs expense.  
Production Status: The following paragraph replaces this Section: Each  
Machine is newly manufactured. It may incorporate in addition to new parts,  
re-used parts as well.  
Limitation of Liability: The following is added to this Section: The limitations  
and exclusions specified in the Statement of Warranty will not apply to  
damages caused by IBM with fraud or gross negligence and for express  
warranty.  
In item 2, replace U.S. $100,000with "EUR 500,000."  
The following sentence is added to the end of the first paragraph of item 2:  
IBMs liability under this item is limited to the violation of essential contractual  
terms in cases of ordinary negligence.  
IRELAND: Extent of Warranty: The following is added to this Section: Except  
as expressly provided in these terms and conditions, all statutory conditions,  
including all warranties implied, but without prejudice to the generality of the  
foregoing all warranties implied by the Sale of Goods Act 1893 or the Sale of  
Goods and Supply of Services Act 1980 are hereby excluded.  
Limitation of Liability: The following replaces items one and two of the first  
paragraph of this Section: 1. death or personal injury or physical damage to  
your real property solely caused by IBMs negligence; and 2. the amount of  
any other actual direct damages, up to the greater of EUR 500,000 or  
125 percent of the charges (if recurring, the 12 monthscharges apply) for the  
Machine that is the subject of the claim or which otherwise gives rise to the  
claim.  
Applicability of suppliers and resellers (unchanged).  
The following paragraph is added at the end of this Section: IBMs entire  
liability and your sole remedy, whether in contract or in tort, in respect of any  
default shall be limited to damages.  
ITALY: Limitation of Liability: The following replaces the second sentence in  
the first paragraph: In each such instance unless otherwise provided by  
mandatory law, IBM is liable for no more than: (item 1 unchanged) 2) as to any  
other actual damage arising in all situations involving non-performance by  
IBM pursuant to, or in any way related to the subject matter of this Statement  
of Warranty, IBMs liability, will be limited to the total amount you paid for the  
Machine that is the subject of the claim.  
Appendix D. Product warranties and notices D-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Applicability of suppliers and resellers (unchanged).  
The following replaces the second paragraph of this Section: Unless otherwise  
provided by mandatory law, IBM and your reseller are not liable for any of the  
following: (items 1 and 2 unchanged) 3) indirect damages, even if IBM or your  
reseller is informed of their possibility.  
SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND:  
Limitation of Liability: The following is added to this Section: IBMs entire  
liability to you for actual damages arising in all situations involving  
nonperformance by IBM in respect of the subject matter of this Statement of  
Warranty will be limited to the charge paid by you for the individual Machine  
that is the subject of your claim from IBM.  
TURKIYE: Production Status: The following replaces this Section: IBM fulfills  
customer orders for IBM Machines as newly manufactured in accordance with  
IBMs production standards.  
UNITED KINGDOM: Limitation of Liability: The following replaces items 1  
and 2 of the first paragraph of this Section:  
1. death or personal injury or physical damage to your real property solely  
caused by IBMs negligence;  
2. the amount of any other actual direct damages or loss, up to the greater of  
Pounds Sterling 150,000 or 125 percent of the charges (if recurring, the 12  
monthscharges apply) for the Machine that is the subject of the claim or  
which otherwise gives rise to the claim.  
The following item is added to this paragraph: 3. breach of IBMs obligations  
implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply  
of Goods and Services Act 1982.  
Applicability of suppliers and resellers (unchanged).  
The following is added to the end of this Section: IBMs entire liability and  
your sole remedy, whether in contract or in tort, in respect of any default will  
be limited to damages.  
NORTH AMERICA  
CANADA: Warranty Service: The following is added to this section: To obtain  
warranty service from IBM, call 1-800-565-3344. In Toronto, call 416-383-3344.  
UNITED STATES OF AMERICA: Warranty Service: The following is added to  
this section: To obtain warranty service from IBM, call 1-800-772-2227.  
D-12 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notices  
This publication was developed for products and services offered in the U.S.A.  
IBM may not offer the products, services, or features discussed in this  
document in other countries. Consult your local IBM representative for  
information on the products and services currently available in your area. Any  
reference to an IBM product, program, or service is not intended to state or  
imply that only that IBM product, program, or service may be used. Any  
functionally equivalent product, program, or service that does not infringe any  
IBM intellectual property right may be used instead. However, it is the users  
responsibility to evaluate and verify the operation of any non-IBM product,  
program, or service.  
IBM may have patents or pending patent applications covering subject matter  
described in this document. The furnishing of this document does not give you  
any license to these patents. You can send license inquiries, in writing, to:  
IBM Director of Licensing  
IBM Corporation  
North Castle Drive  
Armonk, NY 10504-1785  
U.S.A.  
The following paragraph does not apply to the United Kingdom or any  
country where such provisions are inconsistent with local law:  
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS  
PUBLICATION AS ISWITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of  
express or implied warranties in certain transactions, therefore, this statement  
may not apply to you.  
This information could include technical inaccuracies or typographical errors.  
Changes are periodically made to the information herein; these changes will be  
incorporated in new editions of the publication. IBM may make improvements  
and/or changes in the product(s) and/or the program(s) described in this  
publication at any time without notice.  
IBM may use or distribute any of the information you supply in any way it  
believes appropriate without incurring any obligation to you.  
Any performance data contained herein was determined in a controlled  
environment. Therefore, the result obtained in other operating environments  
may vary significantly. Some measurements may have been made on  
development-level systems and there is no guarantee that these measurements  
Appendix D. Product warranties and notices D-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
will be the same on generally available systems. Furthermore, some  
measurements may have been estimated through extrapolation. Actual results  
may vary. Users of this document should verify the applicable data for their  
specific environment.  
Trademarks  
The following terms are trademarks of the IBM Corporation in the United  
States or other countries or both:  
IBM  
PS/2  
HelpCenter  
Microsoft, Windows, and Windows NT are trademarks of the Microsoft  
Corporation.  
Other company, product, and service names may be trademarks or service  
marks of others.  
D-14 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48X-20X CD-ROM Drive  
Federal Communications Commission (FCC) statement  
Note: This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more  
of the following measures:  
v Reorient or relocate the receiving antenna.  
v Increase the separation between the equipment and receiver.  
v Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
v Consult an IBM authorized dealer or service representative for help.  
Properly shielded and grounded cables and connectors must be used in order  
to meet FCC emission limits. Proper cables and connectors are available from  
IBM authorized dealers. IBM is not responsible for any radio or television  
interference caused by using other than recommended cables and connectors or  
by unauthorized changes or modifications to this equipment. Unauthorized  
changes or modifications could void the users authority to operate the  
equipment.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) this device may not cause harmful interference,  
and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
Responsible party:  
International Business Machines Corporation  
New Orchard Road  
Armonk, NY 10504  
Telephone: 1-919-543-2193  
Tested To Comply  
With FCC Standards  
FOR HOME OR OFFICE USE  
Appendix D. Product warranties and notices D-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Industry Canada Class B emission compliance statement  
This Class B digital apparatus complies with Canadian ICES-003.  
Avis de conformite a la reglementation dIndustrie Canada  
Cet appareil numérique de classe B est conforme à la norme NMB-003 du  
Canada.  
Deutsche EMV-Direktive (electromagnetische Verträglichkeit)  
Dieses Gerät ist berechtigt in Übereinstimmung mit dem deutschen EMVG  
vom 9.Nov.92 das EG-Konformitätszeichen zu führen.  
Der Aussteller der Konformitätserklärung ist die IBM UK, Greenock.  
Dieses Gerät erfüllt die Bedingungen der EN 55022 Klasse B.  
European Union - emission directive  
This product is in conformity with the protection requirements of EU Council  
Directive 89/366/ECC on the approximation of the laws of the Member States  
relating to electromagnetic compatibility.  
IBM can not accept responsibility for any failure to satisfy the protection  
requirements resulting from a non-recommended modification of the product,  
including the fitting of non-IBM option cards.  
This product has been tested and found to comply with the limits for Class B  
Information Technology Equipment according to CISPR 22/European Standard  
EN 55022. The limits for Class B equipment were derived for typical residential  
environments to provide reasonable protection against interference with  
licensed communication devices.  
Union Européenne - Directive Conformité électromagnétique  
Ce produit est conforme aux exigences de protection de la Directive  
89/336/EEC du Conseil de lUE sur le rapprochement des lois des États  
membres en matière de compatibilité électromagnétique.  
IBM ne peut accepter aucune responsabilité pour le manquement aux exigences  
de protection résultant dune modification non recommandée du produit, y  
compris linstallation de cartes autres que les cartes IBM.  
Ce produit a été testé et il satisfait les conditions de l’équipement informatique  
de Classe B en vertu de CISPR22/Standard européen EN 55022. Les conditions  
D-16 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
pour l’équipement de Classe B ont été définies en fonction dun contexte  
résidentiel ordinaire afin de fournir une protection raisonnable contre  
linterférence dappareils de communication autorisés.  
Unione Europea - Directiva EMC (Conformidad électromagnética)  
Este producto satisface los requisitos de protección del Consejo de la UE,  
Directiva 89/336/CEE en lo que a la legislatura de los Estados Miembros sobre  
compatibilidad electromagnética se refiere.  
IBM no puede aceptar responsabilidad alguna si este producto deja de  
satisfacer dichos requisitos de protección como resultado de una modificación  
no recomendada del producto, incluyendo el ajuste de tarjetas de opción que  
no sean IBM.  
Este producto ha sido probado y satisface los límites para Equipos Informáticos  
Clase B de conformidad con el Estándar CISPR22 y el Estándar Europeo EN  
55022. Los límites para los equipos de Clase B se han establecido para entornos  
residenciales típicos a fin de proporcionar una protección razonable contra las  
interferencias con dispositivos de comunicación licenciados.  
Union Europea - Normativa EMC  
Questo prodotto è conforme alle normative di protezione ai sensi della  
Direttiva del Consiglio dellUnione Europea 89/336/CEE sullarmonizzazione  
legislativa degli stati membri in materia di compatibilità elettromagnetica.  
IBM non accetta responsabilità alcuna per la mancata conformità alle  
normative di protezione dovuta a modifiche non consigliate al prodotto,  
compresa linstallazione di schede e componenti di marca diversa da IBM.  
Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei  
limiti stabiliti per le le apparecchiature di informatica Classe B ai sensi del  
CISPR 22/Norma Europea EN 55022. I limiti delle apparecchiature della Classe  
B sono stati stabiliti al fine di fornire ragionevole protezione da interferenze  
mediante dispositivi di comunicazione in concessione in ambienti residenziali  
tipici.  
Appendix D. Product warranties and notices D-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-18 48X-20X Internal IDE CD-ROM Drive: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢁꢂꢃ  
Part Number: 71P7279  
Printed in the United States of America  
on recycled paper containing 10%  
recovered post-consumer fiber.  
*71P7279*  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Heat Pump 312794E User Manual
Grizzly Meat Grinder H6247 User Manual
Hamilton Beach Juicer 395W User Manual
HannsG Computer Monitor HH181 User Manual
Healthrider Treadmill HRTL08980 User Manual
Heatcraft Refrigeration Products Fan Air Cooled Condensing Units User Manual
Heat Glo LifeStyle Indoor Fireplace BAY 40 User Manual
Honeywell Fan HT 380 Series User Manual
HP Hewlett Packard Power Supply 6235A User Manual
Hyundai IT Flat Panel Television HLT 2672 User Manual