Hunter Fan Fan 90437 User Manual

ClassicTripod Fan  
Owners Manual  
Model  
90437  
90440  
44834-01  
20130305  
©2013 Hunter Fan Co.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Thank you for choosing the Hunter Oscillating Stand  
Fan. This manual gives you complete instructions for  
assembling and using your fan. Here are some the  
features you will enjoy with your fan:  
3 An attractive design that enhances any decor  
3 A powerful motor for maximum air flow  
3 Three speeds to adjust your comfort level  
3 All metal construction  
3 Parts of this fan, including the blades and the grill,  
have been treated with Hunters Dust Armor Protection,  
making them less likely to attract dust and dirt.  
SAFETY AND WARNINGS  
To reduce the risk of fire or electrical shock, DO NOT use  
this fan with any solid-state speed control device.  
When using electrical appliances, basic precautions  
should always be taken to reduce the risk of fire, electric  
shock and personal injury:  
Read all instructions before using this fan.  
1. Improper installation may result in the risk of fire,  
electric shock or personal injury.  
2. To prevent the risk of fire and electric shock, DO  
NOT use the unit near windows. Rain and moisture  
may create an electrical hazard.  
3. The power plug must be removed from the power  
socket when not in use, before cleaning, servicing,  
maintenance and before moving to another location.  
4. DO NOT put fan in a damp place or where humidity  
is high, such as a bathroom.  
5. The fan should be placed on a flat, stable surface to  
avoid overturning.  
6. Use fan only for intended use, as described in this  
instruction manual.  
7. To protect against electrical shock, DO NOT immerse  
any part of the unit in water or spray with liquids.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
8. Close supervision is necessary when any appliance  
is used near children.  
9. NEVER insert fingers, pencils or any other objects  
through the grill when the fan is running.  
10. DO NOT operate any appliance with a damaged  
cord or plug, after the appliance malfunctions or has  
been dropped or damaged in any manner.  
11. To disconnect, grip plug and pull from wall outlet.  
NEVER yank on cord.  
12. ALWAYS use on a dry surface.  
13. This product is intended for household use only and  
not for commercial or industrial use.  
14. DO NOT operate fan in the presence of explosive  
and/or flammable fumes.  
15. DO NOT place fan or any parts near an open flame,  
cooking or any other heating appliances.  
16. DO NOT use near curtains, plants, window  
treatments, etc.  
17. This appliance has a grounded three-prong plug  
and is suitable for grounded receptacle use only.  
An adapter is available for connecting three-blade  
grounding-type plugs to two-slot receptacles. The  
adapter must be properly grounded. DO NOT  
attempt to defeat the purpose of this safely feature.  
18. The rubber feet on this product may interact with  
wood and cause damage to furniture. Do not place  
on fine wood furniture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
GROUNDING  
Grounded  
Plug  
This appliance is for household use only and may be  
plugged into any 120-volt AC electrical outlet (ordinary  
household current). DO NOT use any other type of outlet.  
WARNING  
Grounding Pin  
Grounded Outlet  
Box Cover  
This unit is suitable for grounded receptacle use only.  
The power cord has a grounded plug as shown in  
Figure 1, and must be used with an electrical outlet that  
can accommodate the grounding pin. If your electrical  
outlet can not accommodate the grounding pin, then you  
must purchase and install one of the two types of adapters  
shown in Figure 2.  
Figure 1  
Adapter  
Metal  
Screw  
NOTE: The adapters ARE NOT supplied with this fan.  
Read, follow, and save the instructions that are included  
with the adapter you choose. Do not use an adapter if  
your electrical outlet can accommodate the grounding pin.  
Grounded Outlet  
Box Cover  
Grounding  
Means  
Figure 2  
LINE CORD SAFETY TIPS  
1. NEVER pull or yank on the cord or the appliance.  
2. To insert plug, grasp it firmly and guide it into the outlet.  
3. To disconnect the appliance, grasp the plug and  
remove it from the outlet.  
4. Before each use, inspect the line cord for cuts and/  
or abrasion marks. If any are found, the appliance  
should be serviced and the line cord replaced. Please  
return it to our Service Department or to an authorized  
service representative.  
5. NEVER wrap the cord tightly around the  
appliance, as this could place undue stress on the  
cord where it enters the appliance and could cause  
it to fray and break.  
6. DO NOT operate appliance if the line cord shows any  
damage, if the appliance works intermittently or stops  
working entirely.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
FUSED PLUG  
This plug is a safety feature. It contains a safety device  
(fuse) that should not be removed. Discard product if the  
attachment plug is damaged. To reduce the risk of fire,  
electric shock and personal injury, DO NOT remove,  
replace, repair or tamper with the originally supplied  
plug. If the Fan does not function properly, it may be due  
to the safety device incorporated in this plug.  
If the fuse fails, it is generally due to a short circuit or  
circuit overload. Replace the fuse as per the instructions  
below. If the replacement fuse fails, immediately  
unplug the unit and contact our technical support  
department for assistance.  
Figure 3  
Figure 4  
Figure 5  
Fuse Replacement:  
1. To replace the fuse, first turn the unit it off and unplug  
it from the wall. Locate the door on top of the plug.  
Figure 3.  
2. Slide the door on top of the plug towards the blades.  
Figure 4.  
3. Carefully remove the fuse from the clips holding it on  
the top and bottom. Figure 5.  
Warning! Electrical Hazard! Only replace with a  
fuse type and rating matching what was removed from  
the product.  
4. Gently push the fuse back into the pins that will hold  
it in place.  
Note: If the fuse is not seated properly, the unit will not  
function.  
5. Slide the Door back over the fuse box in the plug.  
6. Plug the fan back in and resume use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
UNPACKING  
As you unpack the fan, save the carton and packing  
materials in case you want to move or ship the unit in the  
future. Carefully remove all items from the box.  
Upper Bolt  
Lower Bolt  
TRIPOD ASSEMBLY  
1. Fully extend the legs and install the three lower bolts  
and the nuts that secure them. Figure 6.  
Figure 6  
2. Tighten all upper and lower screws using two 10 mm  
wrenches.  
3. Remove the setscrew from the plastic package.  
Extend the inner pole and install the setscrew into the  
screw hole on the inner pole. Figure 7.  
Inner Pole  
Setscrew  
ATTACHING ASSEMBLY TO POLE  
1. Press the clip buttons in completely while sliding the  
pole from the motor housing assembly into the inner  
pole until the clip buttons appear through the hole in  
the inner pole. Figure 8.  
Figure 7  
Clip Button  
Figure 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
GRILL ASSEMBLY  
1. Remove the four grill mounting screws from the  
motor housing. Figure 8.  
Grill  
Mounting  
Screw  
2. Make sure that the grill is positioned so that three  
of the grill lines are completely between the top  
tabs. Then place the Back Grill against the Motor  
Housing, Figure 9., and line up the four tabs on the  
back of the grill to the four screw holes on the front  
of the motor.  
Figure 8  
Figure 9  
Figure 10  
1
3
2
3. To attach the Back Grill to the Motor Housing  
partially install the four grill mounting screws.  
Tighten all four screws. Figure 10.  
Top Tabs  
Grill Lines  
4. Loosen the screw on the back of the Blade assembly.  
Figure 11a. Slide the Blade assembly onto the  
motor shaft. Figure 11.  
5. Tighten the Screw on the Blade assembly to secure it  
to the Motor. Make sure that the end of the screw is  
positioned within the notch on the shaft. Figure 12.  
Notch  
Fan Blade  
11a  
Motor  
Figure 11  
Figure 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Back Grill  
Hunter Logo  
GRILL ASSEMBLY (CONT.)  
6. Remove the grill ring from the front grill by loosening  
the screw holding it.  
7. Place the front grill against the back grill so that the  
Hunter logo faces right side up and push together until  
the tabs on the grills hold them together. Figure 13.  
8. Expand the grill ring by loosening the screw that  
secures it. Figure 14.  
Front Grill  
Figure 13  
9. Slide the grill ring over both front and back grills  
turning the ring so that the screw that secures it, is  
on the bottom. Figure 14.  
10. Tighten the screw to secure the grill ring over both  
the front and back grill. Figure 15.  
Grill  
Ring  
Screw  
Figure 14  
Screw  
Figure 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
OPERATION  
Off / Speed Selection  
High  
Medium  
Low  
To turn the fan on and off or to control the speed, turn the  
speed knob on the top of the motor housing to the proper  
setting. Figure 17.  
Off  
Oscillation  
To allow the fan to oscillate, push the knob beside the fan  
speed control down. Pull up on the knob if oscillation is  
not desired. Figure 18.  
Figure 17  
Oscillation  
Knob  
Figure 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
MAINTENANCE  
This fan is permanently lubricated and will not require  
additional lubrication (oil) for the life of the fan.  
This fan requires little maintenance and contains  
no user serviceable parts. DO NOT try to fix  
it yourself. Contact qualified service personnel  
if servicing is needed.  
Before cleaning, turn fan off and unplug from electrical  
outlet. Wipe off excess dust with a lint-free cloth. To ensure  
adequate air circulation to the motor, keep vents located  
at the rear of the motor free from dust accumulation. A  
vacuum cleaner hose can be used to clean these vents.  
DO NOT immerse the fan in water or any other liquid.  
CLEANING THE GRILL AND BLADE:  
1. Turn the fan off and unplug from the electrical outlet.  
2. Disassemble the grills by loosening the screw holding  
the grill ring and remove it from the grills.  
3. Two tabs hold the front grill and back grill together.  
Pull the front grill from the back.  
4. The blade may be removed by loosening the screw  
holding it in place. Grills and blades may be cleaned  
with mild soap and water only after they have been  
removed from the motor housing.  
5. Use a dry or slightly damp lint free cloth to clean  
the fan. Do not use a furniture polish or any other  
cleaners that leave any residue, as they will damage  
the protective Dust Armor.  
3 Use a soft, slightly damp cloth to wipe the remaining  
fan parts.  
3 DO NOT allow water or any other liquid to get into  
the motor housing or base.  
3 Reassemble the fan after blades and grills have  
dried completely.  
3 DO NOT plug the fan into an electrical outlet until it  
has been fully reassembled.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
TROUBLESHOOTING  
1. Problem  
3 Fan will not oscillate.  
Solution  
3 Push down on the knob on top of motor housing to  
activate oscillation.  
TECHNICAL SUPPORT  
If you have any additional questions or problems with  
your Hunter Portable Fan, please call:  
USA: 1-888-830-1326  
Canada: 1-866-268-1936  
Hours of operation are from 7:00 am to 7:00 pm  
Monday - Friday and 8:00 am to 5:00 pm on Saturday,  
Central Time. You may also contact us on the Internet at  
WARRANTY  
The Hunter Fan Company makes the following limited  
warranty to the user or consumer purchaser of this Hunter  
Portable Fan:  
If your Hunter Portable Fan motor fails at any time  
within one year after the date of sale due to a defect in  
material or workmanship, labor to repair the defect will  
be provided free of charge at our nearest service center  
or our Service Department in Memphis, Tennessee. You  
will be responsible for labor costs after this one-year  
period. The foregoing limited warranty applies only to  
the motor itself, and does not apply to electronic controls  
such as remote controls, remote control receivers or  
transmitters used in conjunction with the motor. These  
electronic control items are included in the one year  
limited warranty below.  
If any part of your Hunter Portable Fan other than the  
motor fails at any time within one year after the date of  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
sale due to a defect in material or workmanship, we  
will repair or, at our option, replace the defective part  
free of charge for parts and labor performed at our  
nearest service center or at our Service Department in  
Memphis, Tennessee.  
IF THE USER OR CONSUMER PURCHASER CEASES TO  
OWN THE FAN, THIS WARRANTY AND ANY IMPLIED  
WARRANTY WHICH THEN REMAINS IN EFFECT,  
INCLUDING BUT NOT LIMITED TO ANY IMPLIED  
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, ARE VOIDED. NO WARRANTY,  
EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY  
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE, IS MADE IN RESPECT TO THE GLASS GLOBES  
OR LIGHT BULBS OR THE FINISH ON ANY METAL  
PORTION OF THE FAN. THIS WARRANTY IS IN LIEU  
OF ALL OTHER EXPRESS WARRANTIES. THE DURATION  
OF ANY IMPLIED WARRANTY, INCLUDING, BUT  
NOT LIMITED TO ANY IMPLIED WARRANTY OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE, IN RESPECT TO ANY HUNTER FAN MOTOR  
OR OTHER FAN PART, IS EXPRESSLY LIMITED TO THE  
PERIOD OF THE EXPRESS WARRANTY SET FORTH  
ABOVE FOR SUCH MOTORS AND OTHER PARTS.  
This warranty is voided if your Hunter Fan is not  
purchased and used in the USA.  
This warranty excludes and does not cover defects,  
malfunctions or failures of any Hunter Portable fan  
which were caused by repairs by persons not authorized  
by us, use of parts or accessories not authorized by  
us, mishandling, improper installation, modifications,  
or damage to the Hunter Portable fan while in your  
possession, or unreasonable use, including failure to  
provide reasonable and necessary maintenance.  
To obtain servicing, contact the nearest Hunter  
authorized service center or the Hunter Fan Company  
Service Department, 7130 Goodlett Farms Pkwy. Suite  
400, Memphis, Tennessee 38016. Please contact us  
before shipping your fan to us. If we authorize you to  
ship it to us, you will be responsible for all insurance  
and freight or other transportation charges to our factory  
service center. We will return your Hunter Fan freight  
prepaid. Your portable fan should be properly packed to  
avoid damage in transit since we will not be responsible  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
for any such damage. Proof of purchase is required  
when requesting warranty service. The purchaser must  
present sales receipt or other document that establishes  
proof of purchase.  
IN NO EVENT SHALL HUNTER FAN COMPANY BE LIABLE  
FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES.  
SOME STATES DO NOT ALLOW LIMITATIONS ON  
HOW LONG AN IMPLIED WARRANTY LASTS OR  
THE EXCLUSION OR LIMITATION OF INCIDENTAL  
OR CONSEQUENTIAL DAMAGES SO THE ABOVE  
LIMITATION MAY NOT APPLY TO YOU.  
THE WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS  
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH  
VARY FROM STATE TO STATE.  
Company  
7130 Goodlett Farms Pkwy., Suite 400  
Memphis, Tennessee 38016  
Printed in China and Taiwan  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  

Grizzly Power Hammer T10828 User Manual
Hasbro Motorized Toy Car 09392 User Manual
Hayter Mowers Lawn Mower 48ST User Manual
Honeywell Car Stereo System 63 1332 02 User Manual
Honeywell Home Security System VISTA 128FBP User Manual
Honeywell Photo Scanner Xenon 1500 User Manual
HP Hewlett Packard Barcode Reader xw460c blade workstation User Manual
Husqvarna Chainsaw T425 User Manual
Image Home Gym IMTL139050 User Manual
Imperial Range Boiler 24BR XB User Manual