Humax DVR CXC 2000PVR User Manual
Personal Video Recorder  
Personlig digital videospelare  
CONAX embedded  
Inbyggd CONAX  
CXC-2000PVR  
User's Manual  
Användarhandbok  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Notice  
**  
Copyright (Copyright © 2001 HUMAX Corporation)  
Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except  
approval of ownership of copyright and copyright law.  
**  
Warranty  
The information in this document is subject to change without notice. HUMAX does not have any  
responsibility for direct, indirect, accidental, necessary and other damage due to your offer or use of  
the information contained in this manual.  
**  
Trademarks  
VIACCESS™ is a trademark of France Telecom.  
CryptoWorks (TM) is a trademark of Philips Electronics N.V.  
Irdeto is a trademark of Mindport BV.  
Nagravision is a registered trademark of Kudelski S.A.  
Conax is a trademark of Telenor Conax AS.  
'Dolby' and the double-D symbol are trademarks of Dolby Laboratories.  
Manufactured under license from Dolby Laboratories.  
**  
**  
**  
Thank you for purchasing a HUMAX Personal Video Recorder. Please read this user manual  
carefully to be able to safely install, use and maintain the product at maximum performance. Keep  
this user manual next to your product for future reference.  
**  
**  
**  
**  
GB 1  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Notice  
**  
Read this manual carefully and make sure you understand the provided instructions. For your safety,  
check what the result each action will be.  
Warnings, Cautions and Notes  
Throughout the whole manual, pay special attention to the following marks that indicate hazardous  
situations.  
**  
•
•
•
Warning  
Indicates a hazardous situation which, if not avoided, could result in (serious) injury.  
Caution  
Indicates a situation which, if not avoided, could damage the equipment or other apparatus.  
Note  
Indicates additional information to the user to make the user aware of possible problems and  
information of any importance to help the user to understand, to use and to maintain the  
installation.  
**  
**  
To reduce the risk of electric shock, do not remove cover (or back). No  
user serviceable parts inside. Refer servicing to qualified service  
personnel.  
**  
This symbol indicates dangerous voltage inside the product that  
presents a risk of electric shock or personal injury.  
**  
**  
**  
This symbol indicates important instructions accompanying the product.  
**  
**  
**  
**  
**  
GB 2  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Safety and Warning  
**  
This Personal Video Recorder has been manufactured to comply with international safety standards.  
Please read the following safety precautions carefully.  
Safety Instructions and Precautions  
1. MAINS SUPPLY  
**  
90 - 250V AC 50/60Hz  
Operate your product only from the type of power source indicated on the marking label. If  
you are not sure of the type of power supply to your home, consult your local power  
company. Disconnect the product from the mains before you start any maintenance or  
installation procedures  
**  
2. OVERLOADING  
**  
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or  
shock.  
**  
3. LIQUIDS  
**  
The product should not be exposed to any liquids such as dripping or splashing. In addition,  
no objects filled with liquids, such as vase, should be placed on the apparatus.  
**  
4. CLEANING  
**  
Disconnect the product from the wall outlet before cleaning.  
Use a light damp cloth (no solvents) to dust the product.  
**  
5. VENTILATION  
**  
**  
**  
The slots on top of the product must be left uncovered to allow proper airflow to the unit. Do  
not stand the product on soft furnishings or carpets. Do not stack electronic equipment on top  
of the product.  
**  
6. ATTACHMENTS  
**  
Do not use any unsupported attachments as these may be hazardous or cause damage the  
product.  
**  
7. CONNECTION TO THE CABLE TV SIGNAL AND TV  
**  
Connect all components before plugging any power cords into the wall outlet. Always turn off  
the product, TV and other components before you connect or disconnect any cables.  
8. LOCATION  
**  
Place the product indoors to avoid exposing it to lightning, rain or sun. Do not place it near a  
radiator or heat register.  
Make sure it has more than 10 cm clearance from any appliances susceptible to  
electromagnetic influences, such as a TV or a VCR.  
Do not block these openings with any object, and do not place the product on a bed, sofa,  
rug, or other similar surface.  
If you place the product on a rack or bookcase, ensure that there is adequate ventilation and  
that you have followed the manufacturer's instructions for mounting.  
Do not place the product on an unstable cart, stand, tripod, bracket or table from where it can  
fall. A falling product can cause serious injury to a child or adult, and serious damage to the  
appliance  
**  
**  
**  
**  
**  
GB 3  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Safety and Warning  
**  
9. LIGHTNING, STORM, or NOT IN USE  
**  
Unplug the product from the wall outlet and disconnect the cable during a thunderstorm or  
when left unattended and unused for long periods of time. This will prevent damage to the  
unit due to lightning and power-surges.  
**  
10. EXTRANEOUS OBJECTS  
**  
Do not insert anything through the openings in the unit, where they can touch dangerous  
voltage points or damage parts  
**  
11. REPLACEMENT of PARTS  
**  
When replacement parts are required, be sure the service technician uses replacement parts  
specified by the manufacturer, or those that have the same characteristics as the original  
part.  
Unauthorized substitution may result in additional damage to the unit.  
**  
**  
Warning  
1. Follow these directions in order not to damage the power cord or plug.  
Do not modify or process the power cord or plug arbitrarily.  
Do not bend or twist the power cord too much.  
Make sure to disconnect the power cord with the plug held.  
Keep heating appliances as far as possible from the power cord in order to prevent the cover  
vinyl from melting.  
**  
**  
2. Follow these directions. Failure to follow one of them may cause electrical shock.  
Do not open the main body.  
Do not insert metals or inflammable objects inside the product.  
Do not touch the power plug with wet hands.  
Disconnect the power cord in case of lightning.  
3. Do not use the product when it is out of order. If you continue to use the product when  
defective, a serious damage can be caused toit. Make sure to contact your local product  
distributor if the product is out of order.  
4. Please do not insert metal or alien substance into the slots for the modules and smart cards.  
In doing so can cause damage to the product and reduce its life span.  
5. Hard Disk Drive  
Do not move the product or turn the power off suddenly while the hard disk drive is running.  
The company shall not be liable for any corruption of data on the hard disk drive caused by  
the carelessness or misuse of users.  
Do not separate the hard disk drive from the main body.  
**  
**  
**  
**  
GB 4  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Contents  
**  
1. Before Using the Recorder  
GB8  
**  
1.1 Package Contents  
1.2 Front Panel  
GB8  
GB9  
1.3 Rear Panel  
GB10  
GB11  
GB12  
GB14  
1.4 Conditional Access  
1.5 Remote Control Unit  
2. Setup  
**  
2.1 Connecting the Cable  
2.2 Powering On  
GB14  
GB17  
GB18  
3. Installation Wizard  
**  
3.1 Language  
GB18  
GB18  
GB19  
GB20  
GB20  
GB21  
3.2 Area Setting  
3.3 Channel Search  
3.4 Time Setting  
3.5 Result  
4. Basic Operation  
**  
**  
**  
4.1 Switching Channel  
4.2 Volume Control  
4.3 Teletext  
GB21  
GB21  
GB21  
GB23  
GB23  
GB24  
GB26  
GB28  
4.4 Changing the Subtitle Language  
4.5 Changing an Audio Language  
4.6 Programme Information (I- plate)  
4.7 Option List  
5. Time Shifted Recording  
**  
5.1 Time Bar  
GB28  
GB28  
GB29  
GB29  
GB29  
GB30  
5.2 Pause  
5.3 Rewind to Previous Scene  
5.4 Fast Forward to the Next Scene  
5.5 Recording  
5.6 Additional Time Shift Operations Using Time Bar  
**  
**  
**  
**  
GB 5  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Contents  
**  
6. Recording and Playback  
GB31  
**  
6.1 Instant Recording  
GB31  
GB31  
GB33  
GB33  
GB35  
GB36  
6.2 Recording Reservation  
6.3 Programme Playback  
6.4 Editing Recorded Programmes  
6.5 Checking Hard Disk Drive  
7. Channel List  
**  
7.1 Displaying and Switching Channel List  
7.2 Changing Channel List Group  
7.3 Edit Channels  
GB36  
GB37  
GB38  
GB40  
GB43  
GB44  
7.4 Edit Favourite Channels  
7.5 Channel Change Mode  
8. Programme Guide  
**  
8.1 Viewing Programme Guide Information  
8.2 Finding a Programme  
GB44  
GB46  
GB47  
GB49  
8.3 Viewing Reserved Programme  
**  
**  
9. Setting Preferences  
**  
9.1 Parental Control  
9.2 Language Setting  
9.3 Time Setting  
GB49  
GB51  
GB53  
GB55  
GB57  
GB58  
9.4 A/V Control  
9.5 UHF Tuning  
9.6 Miscellaneous Settings  
**  
**  
**  
**  
GB 6  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
10. Installation  
10.1 Channel Search  
GB59  
**  
GB59  
GB62  
GB64  
GB65  
10.2 Linear Search  
10.3 Default Setting  
11. Software Update  
11.1 OTA (Over the Air)  
12. System Information  
**  
GB65  
GB68  
**  
12.1 Status  
GB68  
GB68  
GB69  
GB70  
GB71  
GB72  
12.2 Signal Detection  
12.3 Conditional Access (for Conax embedded)  
13. Games  
14. Menu Map  
15. Troubleshooting  
**  
15.1 Troubleshooting  
15.2 Error Message  
16. Specification  
GB72  
GB73  
GB74  
GB76  
GB77  
**  
**  
17. Glossary  
18. Service and Support  
**  
**  
**  
**  
GB 7  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1. Before Using the Recorder  
**  
This chapter provides detailed instructions on the product and its accessories.  
1.1 Package Contents  
Please check all package contents before using your product.  
**  
**  
Remote Control Unit  
**  
Batteries  
User's Manual  
**  
**  
**  
**  
SCART Cable  
RF Cable  
**  
**  
**  
Note: Since faults may occur if the remote controller is being left without a battery for a long time,  
always keep the battery inserted in the remote controller.  
**  
Warning:  
•
•
•
To install a hard disk drive, contact your product provider.  
The company shall not be liable for problems caused by installing a hard disk drive by user.  
This product provides best performance with Seagate ST380012ACE(80G) or Maxtor  
4R080L0(80G) Hard Disk Drive.  
•
This product provides only 80GB of hard disk drive. The company shall not be liable for  
problems caused by the installation of hard discs bigger than 80GB.  
**  
**  
**  
**  
GB 8  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1.2 Front Panel  
**  
**  
1. STANDBY LED  
**  
Red light is displayed when the product is in the standby mode.  
**  
**  
**  
2. RECORD LED  
**  
Green light is displayed when the product is in recording.  
**  
3. RADIO LED  
**  
Yellow light is displayed when the recorder is in radio mode.  
**  
4. STANDBY Button  
**  
Switches between operation and standby modes.  
**  
5. TV/RADIO Button  
**  
Switches between TV and Radio.  
**  
6. CH - / CH +  
**  
Moves the TV/Radio channel up/down.  
**  
7. SMART CARD SLOT  
**  
Slot for a smart card.  
**  
Note: See 1.4 Conditional Access when you insert the smartcard.  
**  
**  
**  
**  
GB 9  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1. Before Using the Recorder  
**  
1.3 Rear Panel  
**  
**  
1. CABLE IN  
**  
Connects a cable to a CABLE input jack on the Recorder.  
**  
2. TV/VCR  
**  
Connects a RF signal from your recorder to RF(ANT) input jack on your TV or VCR.  
**  
3. TV SCART  
**  
Connects a TV SCART cable.  
**  
4. VCR SCART  
**  
**  
**  
Connects a VCR SCART cable.  
**  
5. S/PDIF  
**  
Outputs the digital audio signals.  
**  
6. VIDEO  
**  
Connects to your TV or VCR and output Video signals.  
**  
7. AUDIO L/R  
**  
Connects to your TV or VCR and output Audio signals.  
**  
8. RS-232C  
**  
Connects to your PC to upgrade product's software programme.  
**  
9. ON/OFF  
**  
Power on/off.  
**  
**  
**  
**  
**  
GB 10  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1.4 Conditional Access  
Although some TV and Radio channels are free to air, most TV and Radio/Music channels are  
available on a subscription basis and can only be enjoyed via Conditional Access component. The  
Conditional Access component is removable Smartcard.  
**  
Inserting Smartcard  
**  
A Smartcard looks similar to a credit card and entitles you to view and listen to all the channels you  
choose to subscribe to. The Smartcard slot on the product can be used for Conax Smartcard only.  
**  
1. Open the right-hand flap on the front panel of the product.  
2. Hold the Smartcard horizontally with the electronic chip (generally small square, gold in  
colour) facing upwards.  
3. Insert the Smartcard into the top slot until the card is completely in.  
**  
**  
**  
**  
**  
**  
**  
GB 11  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1. Before Using the Recorder  
**  
1.5 Remote Control Unit  
**  
**  
**  
**  
**  
**  
GB 12  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1. SOURCE  
11. PLAYBACK CONTROL BUTTONS  
**  
**  
Selects the input source between TV  
Includes fast rewind, play, fast forward,  
and recorder.  
record, stop, pause buttons.  
**  
**  
2. TV/RADIO  
12. STANDBY  
**  
**  
Switches between TV and Radio modes.  
Switches between Operation and  
**  
Standby modes.  
**  
3. NUMERICAL (0~9) BUTTONS  
**  
13. GUIDE  
Enters a TV/Radio channel number or  
**  
menu option number.  
Displays the Programme Guide.  
**  
**  
4. LIST  
14. EXIT  
**  
**  
Displays the channel list.  
Exits the main menu or Guide screen.  
**  
**  
5. BACK  
15. OK  
**  
**  
Returns to the previous menu and  
Selects a menu, or confirms the selected  
operation. And displays the channel list  
screen.  
**  
during watching a programme.  
**  
6. ARROW BUTTONS  
**  
16. G (Game)  
Changes the channel or move the cursor  
to the up, down, left or right menu  
**  
Displays the Game.  
**  
option.  
**  
17. SUBTITLE  
**  
7. OPT+ (OPTION)  
Changes the subtitle language.  
**  
**  
**  
**  
Displays the channel attributes during  
18. V-/V+  
watching a programme.  
**  
**  
Adjusts the audio volume.  
**  
8. AUDIO  
**  
19. i (INFORMATION)  
Displays the Audio list.  
**  
**  
Displays the information about the  
9. CH-/CH+ and PAGE-/PAGE+  
channel and programme.  
**  
**  
Changes the Channel or Page.  
**  
20. MUTE  
**  
10. MENU  
Pauses the audio temporarily. That is,  
**  
Displays the main menu.  
volumes on/off temporarily.  
**  
**  
**  
**  
**  
**  
GB 13  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
2. Setup  
**  
This chapter describes how to set up the Recorder. Select the most appropriate procedure  
depending on your requirements.  
Note: If you encounter any problem when setting up the Recorder, please contact your local  
product distributor.  
2.1 Connecting the Cable  
1. Connecting TV  
This is the most simple setup mode.  
**  
**  
**  
**  
•
Connect your CATV line to the CABLE IN socket on the Recorder for receiving cable  
services.  
•
TV Scart are connected as in the figure above.  
**  
**  
**  
**  
GB 14  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Connecting TV/VCR with 2 SCARTs  
This is the optimal way to connect the Recorder.  
**  
**  
**  
**  
**  
**  
**  
GB 15  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
2. Setup  
**  
3. Connecting Hi-Fi system  
If you wish to connect S/PDIF to the optical S/PDIF terminal and Dolby digital decoder to listen digital  
audio, connect as following.  
**  
**  
**  
**  
**  
**  
**  
GB 16  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2.2 Powering On  
1. Connect the power cord of the recorder to a wall outlet.  
2. Turn on the power switch, located at the left on the back of the recorder.  
Make sure that the Standby LED indicator is turned on Red.  
**  
**  
3. Power on by pressing the STANDBY  
button at Remote Controller.  
**  
**  
**  
**  
**  
**  
**  
GB 17  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
3. Installation Wizard  
**  
When powering on your product for the first time after purchasing, the Installation Wizard is  
automatically started.  
You can easily set-up using simple organisation and options, and watch the broadcasting after  
completing the set-up procedure. You can select items using the NUMERICAL (0-9) button.  
Note: If you press the BACK  
button or select Back and press the OK  
button while  
running the Installation Wizard, you can return to the previous screen.  
3.1 Language  
Select the appropriate language from the list using the  
button and press the OK button to save the selected  
language as a default language for Menu, Subtitle, and Audio.  
3.2 Area Setting  
**  
**  
The country is fixed to Sweden.  
**  
**  
**  
**  
GB 18  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
3.3 Channel Search  
You can set parameters to search channels.  
Select the following item using the  
button, and press the OK  
or button.  
•
Frequency: The default value is set to 362000. If you  
wish to set your desired frequency value, select User  
Define, and enter the value using the NUMERICAL (0~9)  
button.  
•
Symbol Rate: The default value is set to 6875. Select  
your desired symbol rate using the  
button, and  
press the OK or button. If the desired value is not  
listed, then select User Define, and enter the value using  
the NUMERICAL (0~9) button.  
•
•
Network Search: The default value is set to Enable.  
Select Enable or Disable using the OK  
or button.  
When using the network search, select Enable. You can  
also disable the network search by selecting Disable.  
Network ID : Select your desired Network ID using the  
button, and press the OK  
or button. If the  
desired value is not listed, then select User Define , and  
enter the value using the NUMERICAL (0~9) button.  
**  
**  
Select Next and press the OK  
button to start channel  
search.  
Please wait for finishing the Channel Search. If you want to stop  
the operation during search, press the OK button.  
If the Channel Search is stopped or finished, you can edit the  
found channels.  
•
•
•
Select All: Select all the found channels.  
Unselect All: Unselect all the found channels.  
Delete: Delete the selected channels.  
Select Save, and press the OK  
button to save the result and  
go to the next step.  
**  
**  
**  
**  
GB 19  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
3. Installation Wizard  
**  
3.4 Time Setting  
You can set the current time.  
Press the OK  
or button to display the values for GMT  
Offset.  
Select the appropriate GMT Offset value using the  
and press the OK button to set the current time.  
button  
Note: The default item is Auto. If GMT Offset is Auto, it is  
automatically set depending on your country. However, if  
the time is NOT set properly, you can change GMT Offset  
to fit your local time.  
Select Next using the  
button and press the OK  
button  
to go to the next step.  
3.5 Result  
It displays the default language, country, time offset, network id,  
and channel search result.  
**  
**  
Select Finish using the  
button and press the OK  
button to complete the Installation Wizard.  
**  
**  
**  
**  
GB 20  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
This chapter describes functions such as switching channel, volume control, and basic features for  
watching programmes.  
4.1 Switching Channel  
You can switch the current channel using one of the following methods.  
1. Press the CH-/CH+  
or  
buttons.  
2. Enter your desired channel numeric using the NUMERICAL (0-9) buttons to move to the  
channel directly.  
3. Press the TV/RADIO  
button to switch between TV channel and Radio channel.  
Note: You can switch channel using the Channel List or Programme Guide. Please refer to  
Chapter 7 and 8 for more information.  
4.2 Volume Control  
1. Press the V-/V+  
2. Press the MUTE  
or  
buttons to adjust the audio volume.  
button to stop the sound temporarily.  
Note: The mute function keeps enabled while you change the channel.  
**  
**  
4.3 Teletext  
When the channel supports teletext, the teletext icon ( ) is displayed on the I-plate. To enter  
Teletext mode, press the SUBTITLE  
button to display teletext.  
1. Using Teletext Menu  
1. Press the MENU  
button to display teletext menu in  
teletext mode.  
2. Select your desired teletext function using the  
3. Press the OK button.  
button.  
**  
**  
**  
**  
GB 21  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
Teletext Functions  
Index  
Return to index page. If there is no index page, jump to page 100.  
Sub-page  
Search the sub-page using the sub-code written by users. If it’s not  
in the teletext mode, display the current time.  
MIX  
Adjusts transparency of teletext screen.  
Hides the teletext except page number.  
Displays the concealed information.  
Cancel  
Reveal  
Double Size Displays the text size as double size.  
Page Hold Holds the current page not updating it.  
2. Viewing Teletext Page  
1. Enter your desired page number using the NUMERICAL  
(0~9) buttons to move to the page directly.  
2. Press the  
number.  
button to move to the next page in increased  
3. Press the  
button to move to the previous page in  
decreased number.  
4. Press the CH-/CH+  
buttons to move to  
**  
**  
previous/next page.  
5. Press the BACK  
button to move back up to 7 recently  
viewed pages in sequence.  
**  
**  
**  
**  
GB 22  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
4.4 Changing the Subtitle Language  
If the current programme provides Subtitle information, you can select the language for the Subtitle.  
1. Press the SUBTITLE  
button to display the subtitle  
language list.  
2. Select your desired subtitle language using the  
button, and press the OK  
button. Then the subtitle will  
be displayed in the selected language at the bottom of the  
screen.  
3. Select OFF from the subtitle language list not to display  
subtitle from the screen.  
Note: You can select a default subtitle language by selecting MENU - Preferences - Language  
Setting - Subtitle Language.  
4.5 Changing an Audio Language  
If the current programme is available in multiple audio languages, you can select the language that  
you wish to listen in.  
1. Press the AUDIO  
button to display Audio list.  
**  
**  
2. Select your desired audio language using the  
to change Audio immediately.  
button  
3. Select Audio Direction(left, right, stereo) using the  
button.  
Note: You can select your desired default audio language by selecting MENU - Preferences -  
Language Setting - Audio Language.  
**  
**  
**  
**  
GB 23  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
4.6 Programme Information (I- plate)  
Programme information is displayed for a specific period of time whenever you switch channels. You  
can view the programme information by pressing the i button while watching a programme.  
Press the EXIT button to hide the I-plate.  
1. General Information  
General Information is displayed as follows on the screen.  
**  
**  
**  
1. Channel number and channel name  
2. Programme name  
3. Icons  
Displayed only if this programme is recording.  
Displayed only if this programme is reserved.  
Represents parental level. It indicates the minimum level of ages that the  
programme is targeted at.  
Displayed only when the channel is a locked channel.  
Displayed only when the channel is a scrambled channel.  
Displayed only when subtitle information is available.  
Displayed only when there is any teletext information.  
Displayed only when the programme is a dolby digital one.  
**  
**  
**  
**  
GB 24  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
4. Current time  
5. Detail programme information: displayed if detailed programme information is provided.  
6. Channel looping mode and Channel List Name : if you select Within the current channel  
list by selecting MENU - Edit Channels - Channel Change Mode, the Icon of Channel  
looping mode is displayed. And channel list, which you selected, is displayed.  
7. Programme broadcasting time and progress bar: displays programme playing time and  
progress bar.  
8. Next programme Information : displayed if next programme information is provided. Press the  
button to display the next programme information.  
Note: If there is no available programme information, programme information is not displayed.  
2. Detailed Programme Information  
You can see detailed information about the current programme.  
Press the i  
button where I-plate is displayed to view detailed  
information.  
Note:  
•
•
Press the i  
button again to hide the information box.  
If the Detailed programme information is more than one  
**  
page, use the  
next page.  
button to move to the previous or  
**  
**  
**  
**  
**  
GB 25  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
4.7 Option List  
You can view and confirm detailed information about the current channel and change the  
information.  
Note: Press the OPT+  
button when the channel list is displayed to view Option List. Then the  
following functions in the option list are performed to the current channel where cursor is  
located.  
1. Add a channel to favourite group  
You can add current channels to the favourite group immediately. Also, you can add a channel to  
multiple Favourite groups.  
1. Press the OPT+  
2. Select Favourite using the  
or OK button.  
3. Select favourite group using the  
button.  
button, and press the  
button and press  
the OK  
button to register for Favourite Group.  
4. Press the OK  
button again on the selected Favourite  
Group to release the registered channel.  
**  
**  
5. Move to the parent menu using the button to save the  
changes automatically.  
Note: For detailed information about how to change Favourite  
Group's name and how to register Favourite Channel for  
the whole channels, refer to Chapter 7.  
**  
**  
**  
**  
GB 26  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Lock/Unlock a Channel  
You can lock or unlock the current channel while watching a programme.  
1. Press the OPT+ button.  
2. Select Lock using the  
OK button.  
3. Select Lock option using the  
OK button.  
4. Select Unlock option using the  
the OK button.  
button, and press the or  
button, and press the  
button, and press  
5. You will be prompted to enter your Password. Enter your  
password to unlock the channel.  
6. Move to the parent menu using the button to save the  
changes automatically.  
Note: When switching to the Locked Channel, you must enter  
the password to watch a programme.The Default  
Password is ‘0000’.  
**  
**  
3. Delete a Channel  
You can delete the current channel while watching a programme.  
1. Press the OPT+  
button.  
2. Select Delete using the  
button, and press the OK  
or button.  
3. Select Yes in the confirmation message and press the OK  
button.  
4. Enter password using the NUMERICAL (0-9) button to  
delete the current channel and move to the next channel.  
**  
Note:  
•
The Default Password is ‘0000’.  
•
The channel will be permanently deleted. If you would like  
to get it back, you should search channels again using the  
Installation menu.  
**  
**  
**  
**  
GB 27  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Time Shifted Recording  
**  
This unit automatically saves the programme on air so that users can watch programmes as they  
watch a video tape using functions such as rewind, fast forward, replay and pause.  
5.1 Time Bar  
If you press playback control buttons while watching TV, the Time bar appears on the bottom of the  
screen.  
**  
**  
**  
**  
Time bar displays the current operation status, the time difference between the broadcasting point  
and watching point, and an amount of temporarily saved programme. Time bar also provides 5  
operation buttons on the right side for additional time shift operations.  
5.2 Pause  
If you press the PAUSE  
button on the remote controller,  
the current programme is paused. If you press the PLAY  
or  
PAUSE  
button once again, the programme is resumed  
from that point.  
Note:  
Pause makes the time difference or delay between the  
broadcasting point and watching point. The time difference is  
equal to the paused time period. You can check the time  
difference in the Time bar. Other operations such as slow motion  
and rewind also make the time difference.  
Press the STOP  
button to remove the time difference, and  
watch the programme on air presently.  
**  
**  
**  
**  
GB 28  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
5.3 Rewind to Previous Scene  
Press the REWIND  
button on the remote controller to  
watch the scene passed by. Whenever you press the REWIND  
button, the rewind speed increases by 3 steps.  
If you press the PLAY  
button, the rewinding operation  
stops, and the programme is played at normal speed.  
Note: You can rewind to the point when you have changed to  
the current channel. If the watching point reaches the  
start point during rewinding, the programme is played at  
normal speed from the point.  
5.4 Fast Forward to the Next Scene  
Press the FORWARD  
fast forward the programme. Whenever you press the  
FORWARD button, the speed increases by 3 steps.  
button on the remote controller to  
If you press the PLAY button, the fast forward operation  
stops, and the programme is played at normal speed.  
**  
**  
Note: You can use the fast forward operation only when there  
is a time difference between the current watching and the  
broadcasting point caused by some previous operations  
such as pause, slow motion, and rewind. You can fast  
forward to the current broadcasting point. If the watching  
point reaches to the broadcasting point, the programme  
is played at normal speed.  
**  
5.5 Recording  
Press the REC  
button on the remote controller to start recording the current programme. While  
the time shift operation records the programme temporarily, record operation records the programme  
permanently so you can playback the recorded programme at any time. For more information about  
recording, refer to Chapter 6.  
**  
**  
**  
**  
GB 29  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Time Shifted Recording  
**  
5.6 Additional Time Shift Operations Using Time Bar  
You can perform additional time shift operations using the 5 operation buttons on the right side of the  
time bar.  
1. Slow Motion  
Select SLOW MOTION  
and then press the OK  
button to play the current programme in  
slow motion. Press SLOW MOTION  
once again to play the programme at normal speed.  
**  
2. Direct Jump  
Select DIRECT JUMP  
bar. Move this arrow to a desired time point using the  
and then press the OK  
button. A moving arrow appears in progress  
button, and then press the OK button  
to play the programme from the specified time point.  
**  
3. Replay  
Select REPLAY  
and press the OK  
button, to replay the current programme from the 7  
**  
**  
seconds before. When the replay has been completed, the programme is normally played from the  
point.  
**  
4. Skip  
Select SKIP  
and then press the OK  
button to play the programme from the time point 30  
seconds forward from the current watching point.  
You can use the skip operation only when there is a time difference between the current watching  
and the broadcasting point while you use the fast forward operation. If the time difference is less than  
30 seconds, the programme is played from the current broadcasting point.  
**  
5. Displaying a Playlist  
Select PLAYLIST  
and press the OK  
button to display  
the currently saved programme list.  
Select desired programme and then press the OK  
button to  
playback the programme.  
You can perform the time shift operations like VCR functions  
using the Playback control buttons while playing a programme.  
Press the STOP  
button to stop playing the current saved  
programme, and watch the current programme on air.  
**  
**  
**  
**  
GB 30  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
6. Recording and Playback  
**  
You can record a programme without an external media device such as a VCR.  
6.1 Instant Recording  
Press the REC  
Press the STOP  
Note:  
button on the remote controller to record the current programme instantly.  
button to stop recording.  
•
•
You cannot change channels during the recording operation.  
Ensure that there is enough free space before recording, because if the free space on the  
hard disk drive is insufficient, recording will stop. Recording 1 hour of programme may require  
up to 3GB of free space of hard disk space. The space for recording 1 hour of programme  
may be different depending on the programme recorded.  
6.2 Recording Reservation  
You can reserve recording to record your desired programme automatically. You can reserve  
recording of a programme using Menu - Record - Recording Schedule and Guide. For detailed  
information on recording reservation using Guide, refer to Chapter 8 .  
1. Press the MENU  
button.  
2. Select Record using the  
button and press the OK  
**  
**  
or button.  
3. Select Recording Schedule using the  
button and  
press the OK  
or button to display the reserved  
recording list on the screen.  
4. Select a blank list and press the OK  
button to add a  
button to  
new recording reservation.  
5. Select the reserved list and press the OK  
edit the existing reservation information.  
1. Adding Recording Reservations  
1. Enter Channel Number using the NUMERICAL (0~9)  
buttons. The channel name changes automatically  
according to the input channel number  
2. Enter Recording Start Time using the  
NUMERICAL (0~9) buttons.  
button, and  
3. Enter Recording End Time using the  
NUMERICAL (0~9) buttons.  
button, and  
4. Select Repeat mode from Once/Daily/Weekly using the  
button.  
**  
**  
**  
**  
GB 31  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
6. Recording and Playback  
**  
5. Select Programme Lock mode using the  
button.  
6. When you have finished, select Save, and then press the OK  
7. Select Cancel, and then press the OK button to cancel the reservation.  
Note:  
button.  
•
You can reserve 20 programmes for recording.  
•
If the programme to reserve overlaps with the existing one, adjust the reservation so as not to  
overlap.  
•
If the target channel is locked, restricted by watching time or parental control, you have to  
enter a password for reservation.  
2. Editing Recording Reservations  
1. Change Recording Start Time using the  
Numerical (0~9) buttons.  
button, and  
button, and  
2. Change Recording End Time using the  
Numerical (0~9) buttons.  
3. Change Repeat mode using the  
button. You can  
select from Once, Daily, and Weekly.  
4. Change Programme Lock mode using the  
button.  
**  
**  
5. Select Delete, and then press the OK  
button to delete  
a reservation.  
6. Select Cancel, and then press the OK  
7. Select Save, and then press the OK  
button to cancel an edit operation.  
button to finish editing operation.  
Note: If you have configured Lock on a recording reservation, you have to enter a password to  
playback the recorded programme.  
**  
**  
**  
**  
GB 32  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
6.3 Programme Playback  
Select your desired programme from the recorded programme list, and then press the PLAY  
button to playback the recorded programme.  
You can view the programme list recorded by instant recording or recording reservation by selecting  
Menu - Record - Recorded Programme. Otherwise, you can easily view the recorded programme  
list using PLAYLIST  
on the right side of the Time bar while you are watching a programme.  
1. Press the MENU  
button.  
2. Select Record using the  
button, and press the OK  
or button.  
3. Select Recorded Programme using the  
button,  
and press the OK  
or button to display the record  
programme list.  
4. Select the desired programme to playback using the  
button, and then press the PLAY  
button to playback  
the programme.  
5. Press the STOP  
button to stop the current  
programme, and watch the current programme on air.  
6. You can perform time shift operations like VCR functions such as rewind, forward, slow  
motion, pause, skip, and replay using the Playback control buttons on the remote controller or  
the additional buttons on the right side of the time bar while you are playing back a  
programme.  
**  
**  
Note: For more information on the time shift operations like VCR functions, refer to Chapter 5 .  
6.4 Editing Recorded Programmes  
Select Menu - Record - Recorded Programme, and then select the desired recorded programme to  
edit the information of the programme.  
1. Press the MENU  
button.  
2. Select Record using the  
button, and press the OK  
or button.  
3. Select Recorded Programme using the  
button,  
and press the OK  
or button. The recorded  
programme list appears.  
4. Select the desired programme, and then press OK  
to  
display the edit screen.  
Note: If you press the i  
button while playing a programme, a screen appears showing the  
information on the recorded programme.  
**  
**  
**  
**  
GB 33  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
6. Recording and Playback  
**  
1. Deleting a Recorded Programme  
Select Delete in the edit screen, and then press the OK  
button.  
2. Changing The Name of a Recorded Programme  
1. Select Programme in the edit screen, and then press the  
OK  
button to display a keyboard on the screen.  
2. Enter the desired programme name on the screen  
keyboard using the  
, and OK  
button.  
3. Select OK, and then press the OK  
button to  
complete.  
3. Protecting Recorded Programmes from Deletion  
1. Select Protect in the edit screen, and then press the OK  
or Disable.  
or button to change Enable  
**  
**  
2. You have to enter a password to change the status from Enable to Disable.  
Note: If the protect option of the programme is configured to Enable, you cannot delete the  
programme. Therefore, you have to change the protect option to Disable to delete a  
protected programme.  
4. Locking a Recorded programme  
1. Select Lock in the edit screen, and then press the OK  
or button to change Enable or  
Disable.  
2. You have to enter a password to change the status from Enable to Disable.  
Note: If the Lock option of a programme is configured to Enable, you have to enter a password to  
playback the programme.  
**  
**  
**  
**  
GB 34  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
6.5 Checking Hard Disk Drive  
You can check the free space of the hard disk drive, and can format the disk drive if necessary.  
1. Press the MENU button.  
2. Select Record using the  
button, and press the OK  
or button.  
3. Select HDD Control using the  
button, and press the  
OK  
or button.  
4. You can check the used and free space of the HDD.  
5. Select Format and press the OK  
the recorded programmes saved on the HDD, and  
initialise the HDD.  
button to remove all  
**  
6. Select OK for the format confirm message, and enter a  
password to start formatting the HDD.  
**  
**  
Note:  
•
You have to be careful because performing format deletes all the recorded programmes  
saved on the HDD.  
•
Even if you have removed the HDD because it is out of order, you can still watch  
programmes.  
**  
**  
**  
**  
GB 35  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Channel List  
**  
Three types of channel lists are provided for easy and quick channel searching.  
TV  
The list of all TV channels with 2 sub-groups: one is sorted by channel number, the  
other is sorted by channel name.  
Radio  
The list of all Radio channels with 2 sub-groups: one is sorted by channel number,  
the other is sorted by channel name.  
Favourite  
The list of the favourite channels with 5 sub-groups that you can organise channels  
by your private taste.  
**  
7.1 Displaying and Switching Channel List  
You can display channel list using the LIST  
button and switch into other channel on the  
channel list.  
1. Press the LIST  
button while watching a programme  
to display the selected channel list.  
2. Select your desired channel using the  
button and  
press the OK  
button to change the channel.  
3. Enter the channel numeric directly using the NUMERICAL  
(0~9) buttons to move cursor into your desired channel.  
And then press the OK  
selected channel.  
button to change into the  
**  
**  
Note:  
•
If there are multiple channels, press the PAGE-/PAGE+  
button to move by channel.  
•
Whenever you press the TV/RADIO button while the channel list is displayed, the  
channel list will be switched between TV and Radio channel list.  
•
To display scramble icon ( ) in the channel list, select ON by going to MENU - Preferences  
– Miscellaneous Settings - Option in CH List.  
**  
**  
**  
**  
GB 36  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
7.2 Changing Channel List Group  
You can select channel list by group.  
1. Press the button while the channel list is displayed to  
view the group list.  
2. Select your desired channel group using the  
to display its sub-groups.  
button  
3. Press the OK  
or button, select your desired  
button, and then press the OK  
sub-group using the  
button.  
4. The channel list for the selected sub-group is displayed.  
**  
**  
Note:  
•
•
The sub-group of Favourite channel list may exist or not depending on your configuration.  
If Within the Current Channel List option is selected from MENU - Edit channels -  
Channel Change Mode menu, you can only change programme within the selected channel  
list using the CH-/CH+  
while your watching a programme.  
**  
**  
**  
**  
GB 37  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Channel List  
**  
7.3 Edit Channels  
You can edit all channels or each channel by channel list group.  
1. Press the MENU button.  
2. Select Edit Channels using the  
the OK or button.  
3. Select Edit Channel Lists using the  
press the OK or button.  
button, and press  
button, and  
4. You will be prompted to enter your password. Enter your  
password using NUMERICAL (0~9) button.  
Note:  
•
Press the BACK  
the MENU or EXIT  
or button to save the changes and return to the previous menu. Press  
button to exit the Menu screen.  
•
You can easily navigate all menus using the assigned numeric for each menu. Press the  
NUMERICAL (0~9) buttons for each menu. Press the MENU - 3 - 1 in that order on the  
remote controller to select the Edit Channel Lists menu.  
1. Select a Channel Group  
**  
**  
You can select the channel list group to edit. TV and Radio are included as Channel List Groups.  
1. Press the OK  
or button in group to display Channel  
List Group.  
2. Select your desired Channel List Group using the  
button, and press the OK  
button.  
Note:  
•
Press the TV/RADIO  
button to move to TV or RADIO channel list directly.  
•
For editing Favourite channel list, move to MENU - Edit Channels - Edit Favourite  
Channels menu.  
**  
**  
**  
**  
GB 38  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Delete Channels  
You can delete one or more channels.  
1. Move the cursor to the channel list using the  
button.  
2. Select your desired channel, and then press the OK  
button to delete the channel(s). You can select multiple  
channels.  
3. Select Delete on the right using the button, and press  
the OK  
button.  
3. Lock/Unlock Channels  
You can lock or unlock one or more channels.  
1. Move the cursor to the channel list using the  
button.  
2. Select your desired channel, and then press the OK  
button to lock/unlock the channel(s). You can select  
multiple channels.  
**  
**  
3. Select Lock in the right using the button, and press the  
OK  
button.  
Note:  
•
Only if locked channel(s) is selected or all channels are  
locked, Lock is switched into Unlock. When you press  
Unlock, locked channel is switched into unlocked  
channel.  
•
Enter password using the NUMERICAL (0~9) button to  
watch locked channel.  
**  
4. Select/Unselect All Channels  
You can select/unselect all channels at a time.  
1. Select Select All in the right and press the OK  
button to select all channels.  
2. Select Unselect All in the right and press the OK  
button to unselect all the selected  
channels.  
**  
**  
**  
**  
GB 39  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Channel List  
**  
7.4 Edit Favourite Channels  
You can edit Favourite channel or Favourite channel list.  
1. Press the MENU button.  
2. Select Edit Channels using the  
the OK button.  
3. Select Edit Favourite Channels using the  
button, and press  
button,  
and press the OK  
or button.  
Note:  
•
Press the BACK  
the MENU  
or button to save the changes and return to the previous menu. Press  
or EXIT button to exit the Menu screen.  
•
You can easily navigate all menu items using the assigned numerical button for each menu.  
Press the MENU - 3 - 2 in order on the remote controller to select the Edit Favourite  
Channels menu.  
**  
The buttons for editing the Favourite channel list are described in the following table.  
**  
**  
**  
**  
Add  
Adds Favourite channel.  
**  
**  
Remove  
Removes from the Favourite channel.  
**  
**  
TV/Radio  
Switches between TV and Radio channel list.  
**  
**  
Fav.Group  
Changes Favourite channel list group.  
**  
**  
Move  
Moves the order of channel list within the Favourite channel list.  
**  
**  
Rename  
Renames the name of Favourite channel list.  
**  
**  
Sort  
Sorts channels by number or name in all TV/Radio channel list.  
**  
**  
Unselect All  
Unselect all the selected channel.  
**  
**  
**  
**  
GB 40  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1. Add/Remove favourite channels  
You can add favourite channel(s) to a specific Favourite channel  
list or remove the added favourite channel(s) from the list.  
1. Select Favourite Group using  
2. Select your desired channel(s) in all TV/Radio channel list,  
and press to add Favourite channel(s).  
3. Select your desired channel(s) in Favourite channel list,  
and press to remove Favourite channel(s).  
.
Note: You can switch between TV and Radio channel list using  
TV/RADIO button or  
.
**  
**  
2. Move favourite channels  
You can move favourite channel(s) to your desired location within the Favourite channel list.  
1. Select Favourite Group using  
2. Select your desired channel to move within the Favourite  
.
channel list and press the OK  
button.  
3. Select , and press the OK  
button.  
4. Move the cursor to your desired location using the  
button, and press the OK button.  
5. The selected channel(s) is moved to the desired location  
you selected.  
**  
**  
**  
**  
GB 41  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Channel List  
**  
3. Rename a favourite channel list  
You can rename Favourite channel list.  
1. Select Favourite group to rename using  
.
2. Select  
, and press the OK  
button.  
3. Enter the Favourite channel list name using the  
keyboard displayed on the screen.  
4. When finishing entering the Favourite channel list name,  
select OK, and press the OK  
button.  
**  
**  
4. Additional Features  
Additional Features provides many useful functions which are necessary to add Favourite Channel.  
**  
Change between TV and Radio channel list  
You can add not only TV channel(s) but also Radio channel(s) to Favourite channel list. Press  
switch all channel list into TV or Radio channels.  
to  
Note: You can also change into TV or Radio channel by pressing TV/RADIO  
button at remote  
controller.  
**  
Select a favourite channel list  
You can select your desired Favourite channel list to edit. Press  
to display the Favourite channel list. Then select your desired  
channel list using the  
button, and press the OK  
button.  
**  
**  
**  
**  
GB 42  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Sort a channel list  
You can sort all TV or Radio channel lists by channel number or name for easy Favourite channel  
searching. If channel lists are sorted by channel number, is displayed. When you press this  
button, all the channel lists are sorted by name. Or, if channel lists are sorted by channel name,  
is switched into  
. Press this button to order channels by number.  
**  
Unselect all the selected channels  
Press  
button to unselect all the selected channel.  
**  
7.5 Channel Change Mode  
You can change the channel either in the group or in the entire groups while watching a programme.  
1. Press the MENU  
2. Select Edit Channels using the  
the OK button.  
3. Select Channel Change Mode using the  
and press the OK or button.  
4. Select All Channels or Within the Current Channel List  
using the button, and press the OK button.  
button.  
button, and press  
button,  
**  
**  
Note: When Within the current channel list in Favourite Group option is selected, you can  
only change the channel within the current channel list. To change the channel in  
another channel list in which the current channel list is not located, change the channel  
list or select All channels option.  
**  
**  
**  
**  
GB 43  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Programme Guide  
**  
The Programme Guide displays programme information about each channel, based on the date and  
time.You can also schedule your watching using the information given.  
8.1 Viewing Programme Guide Information  
You can view programme information for all channels.  
1. Press the GUIDE  
2. Move to previous or next programme within the same  
channel using the button.  
button.  
3. Move to another desired channel using the  
button. If  
there are multiple channels, use PAGE-/PAGE+  
button to move to channels by page. Also, you can enter  
your desired channel number using the NUMERICAL  
(0~9) button on the remote controller to move to the  
channel directly.  
4. Select your desired programme, and press the OK  
button. Then you can watch the  
programme if it is on air, or you can reserve it if it is the following programme.  
5. Press the i button in the selected programme to view Extended Information for the  
selected channel.  
**  
**  
**  
1. Viewing Guide Information by Groups  
You can view programme information for desired channel list by groups.  
1. Press the GUIDE  
button.  
2. Press the Red button to display the channel list group.  
3. Select your desired channel list group using the  
button to display the appropriate sub-group.  
4. Move the cursor to the sub-group using the button,  
select your desired sub-group using the  
then press the OK button.  
button, and  
5. The Programme Guide for selected channel list is  
displayed.  
**  
**  
**  
**  
GB 44  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Viewing Programme Information Using Time Bar  
You can quickly search for your desired time zone using the Time bar.  
1. Press the GUIDE  
2. Press the Green button to display Time Bar.  
3. Select the Time Bar button using the button, and  
button to move as your desired amount  
button.  
press the OK  
of time. If you press the button repeatedly, the same  
operation is repeated.  
4. Each button functions as follows.  
Now Moves to the current programme where the cursor is located.  
Moves to the previous programme or 30 minutes before.  
Moves to the next programme or 30 minutes after.  
Moves to 2 hours before.  
Moves to 2 hours after.  
Day Moves to one day before.  
Day Moves to one day after.  
**  
**  
5. Select  
button and press the OK  
button to exit the Time Bar.  
Note: Guide provides programme information from the previous day up to 7 days depending on the  
broadcasting company.  
3. Reserving a Recording  
You can automatically reserve your desired programme by selecting the scheduled programme and  
pressing the OK  
button.  
1. Select the desired programme and press the OK  
button. The following message will be displayed.  
2. Select OK and press the OK  
button to reserve the  
programme. When a reservation has been completed, the  
icon is displayed on the reserved programme.  
3. Select CANCEL and press the OK  
button to not  
reserve the programme.  
4. If the channel is locked, parental controlled or restricted by  
watching time, you will be prompted to enter your  
Password. Enter your Password to complete the  
reservation.  
**  
**  
**  
**  
GB 45  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Programme Guide  
**  
8.2 Finding a Programme  
You can find your desired programme by programme name or genre easily.  
1. Press the GUIDE button.  
2. Press the Blue button to display Find screen.  
3. Enter the programme name directly using the keyboard  
displayed on the screen.  
Note: If you press Previous or Next button on the  
Keyboard displayed on the screen, the  
keyboard layout is switched.  
4. When completing entering programme name, select the  
Find button, and press the OK  
5. If you select your desired programme from the results of  
finding programme screen and press the OK button,  
button.  
you can watch the programme if it is on air, or you can  
reserve your programme if it is scheduled(the following  
programme).  
**  
**  
6. Select By Genre and press the OK  
button to search  
button.  
programme by genre.  
7. Select your desired genre and press the OK  
8. As the result screen of Find programme by Name, select  
your desired programme from the Results of Finding  
Programme screen and press the OK  
button to watch  
the programme immediately or reserve the programme.  
Note: The results of the finding programme may differ depending on the provided programme  
information.  
**  
**  
**  
**  
GB 46  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
8.3 Viewing Reserved Programme  
You can add or edit reserved programmes by viewing the reserved programme list.  
1. Press the GUIDE button.  
2. Press the Yellow button to display the Schedule screen.  
3. Select the scheduled programme and press the OK  
button to edit the reservation information.  
4. Select blank list and press the OK  
button to add a  
new reservation schedule.  
**  
**  
1. Editing a Reserved Programme  
1. Change reserved Start Time using the  
the NUMERICAL (0~9) buttons.  
button and  
2. Change reserved End Time using the  
NUMERICAL (0~9) buttons.  
button and the  
3. Change Repeat mode using the  
button. The options  
are Once, Daily, and Weekly.  
4. Change Programme Lock mode using the  
button.  
5. Select Delete and press the OK  
button to delete the  
reserved programme.  
6. Select Cancel and press the OK  
7. Select Save and press the OK  
button to cancel the editing.  
button to complete the editing.  
Note: If the Lock option of a programme is configured to Enable, you have to enter a password to  
playback the programme.  
**  
**  
**  
**  
GB 47  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Programme Guide  
**  
2. Adding a Reservation  
1. Enter your desired Channel Number using the  
NUMERICAL (0~9) button. The channel name is  
automatically displayed by channel number.  
2. Enter your desired Start Time using the  
the NUMERICAL (0~9) button.  
button and  
3. Enter your desired End Time using the  
the NUMERICAL (0~9) button.  
button and  
4. Select one of repeat mode options among Once, Daily,  
and Weekly using the button.  
5. Select Programme Lock mode using the  
button.  
6. Select Save and press the OK  
7. Select Cancel and press the OK  
button to complete entering.  
button to cancel the reservation.  
Note:  
•
You can reserve up to 20 programmes.  
•
•
If your desired programmed is already reserved, adjust the reservation appropriately.  
If the channel is locked, restricted by watching time, you will be prompted to enter your  
Password to complete the reservation.  
**  
**  
**  
**  
**  
**  
GB 48  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Setting Preferences  
**  
You can set censorship, watching time, and all other items suitable for your environment.  
Note:  
•
•
Press the BACK  
the MENU or EXIT  
or button to save the changes and return to the previous menu. Press  
button to exit the Menu screen.  
You can easily select any item from the menu using the NUMERICAL (0-9) buttons.  
**  
9.1 Parental Control  
You can set parental control for each programme and watching  
time. You can also change your Password.  
1. Press the MENU  
2. Select Preferences using the  
OK or button.  
3. Select Parental Control using the  
press the OK or button.  
button.  
button, and press the  
button, and  
4. When a prompting message is displayed to request your  
password, enter the password using the NUMERICAL  
(0-9) button.  
**  
**  
**  
1. Set Censorship  
Censorship Classification allows you to block programmes  
according to the age level you have set.  
1. Select Censorship Classification using the  
and press the OK or button.  
2. Select your desired age level using the  
press the OK button.  
button,  
button, and  
**  
**  
**  
**  
GB 49  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Setting Preferences  
**  
View All  
All programmes can be watched because there is no age limitation.  
Programmes are blocked for children under the age of 7.  
Programmes are blocked for children under the age of 12.  
Programmes are blocked for children under the age of 15.  
Programmes are blocked for children under the age of 18.  
Programmes are blocked without considering the age level.  
7
12  
15  
18  
Lock All  
**  
Note:  
•
•
You have to enter Password to watch the programme which is blocked by the age level.  
Some broadcasting companies do not broadcast the censorship classification information.  
**  
2. Set Allow Watch Time  
You can block programmes according to the watching time for all the channels.  
1. Select Allow Time Control using the  
2. Select Enable or Disable Allow Time Control using the  
or OK button.  
button.  
**  
**  
**  
Disable You can watch a programme whenever you want  
regardless of Allow Time.  
Enable You can watch a programme only while the time  
specified by Allow Time.  
3. When you have selected Enable, set the Start and End  
Time using the NUMERICAL (0-9) buttons, and press the  
OK  
4. If you wish to cancel the entered time, select Cancel  
button, and press the OK button.  
button.  
Note: Once the setting has been completed, you can watch  
programme only during the time specified by Allow Time.  
Otherwise you will need to enter the Password to watch  
any programme during unspecified time.  
**  
**  
**  
**  
GB 50  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
3. Change Password  
You can change the existing password into new one.  
1. Select Change Password using the button, and  
press the or OK button.  
2. Enter New Password using the NUMERICAL (0-9)  
button, and select OK and press the OK button.  
3. Enter New Password again to confirm Verify Password,  
and press the OK button.  
Note: The Default Password is "0000". If you have forgotten  
your Password, please contact your local product  
distributor.  
9.2 Language Setting  
You can set Language for Menu, Audio, and Subtitle.  
1. Press the MENU  
2. Select Preferences using the  
OK or button.  
3. Select Language Setting using the  
press the OK or button.  
button.  
button, and press the  
button, and  
**  
**  
1. Menu/Audio/Subtitle Language  
You can set the language for Menu, Audio and Subtitle.  
1. Select Menu/Audio/Subtitle Language using the  
button.  
2. Press the or OK  
button to display the available Language List.  
button, and press the OK  
3. Select your desired language using the  
button.  
**  
**  
**  
**  
GB 51  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Setting Preferences  
**  
2. Audio Priority  
You can select the priority of audio.  
1. Select Audio Priority using the  
button.  
2. Select one option from Dolby Digital or PCM using the or OK  
button.  
**  
Dolby Digital  
PCM  
This is used when the audio output is connected to 5.1-channel  
digital audio system.  
**  
This is used when the audio output is connected to general audio  
system including TV.  
3. Subtitle Display  
You can select whether or not to display the Subtitle automatically if provided.  
1. Select Subtitle Display using the button.  
2. Select one option from Auto or Manual using the or OK  
button.  
Auto  
Subtitles are displayed automatically in the predefined subtitle language.  
Subtitles are displayed in the language when you select the subtitle language by  
pressing the SUBTITLE button on the remote controller.  
Manual  
**  
**  
4. Subtitle Font  
You can select the Subtitle font.  
1. Select Subtitle Font using the  
button.  
2. Select one option from Variable or Fixed using the or OK  
button.  
**  
Variable  
Fixed  
Uses the horizontally variable Subtitle Font.  
Uses the fixed Subtitle Font.  
**  
**  
**  
**  
GB 52  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
9.3 Time Setting  
You can specify the current time and Power On/Off time.  
1. Press the MENU button.  
2. Select Preferences using the  
OK or button.  
3. Select Time Setting using the  
OK or button.  
button, and press the  
button, and press the  
1. Set Current Time  
You can set the GMT Offset for current time.  
1. Select GMT Offset using the button.  
button to display GMT list. GMT is  
2. Press the or OK  
changed by from 30 minutes to 1 hour.  
3. Select your GMT offset using the  
buttons, and press  
the OK  
button.  
**  
**  
Note: The current time is set automatically whenever GMT  
Offset changes.  
The default item is Auto.  
If GMT offset is Auto, it is automatically set depending on  
your country. However, if the time is NOT set properly,  
you can change GMT Offset to fit your local time.  
**  
**  
**  
**  
GB 53  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Setting Preferences  
**  
2. Power On  
You can set the time when the product is automatically  
powered on.  
1. Select Power On using the  
button.  
2. Select either Enable or Disable the Power On using  
the or OK  
button.  
**  
Enable  
Uses the Power On and sets the  
Power On time.  
Disable  
Does not use the Power On.  
3. When you have selected Enable, enter Channel No  
and Time using the NUMERICAL (0~9) buttons, and  
press the OK  
button.  
**  
**  
3. Power Off  
You can set the time when the product is automatically powered off.  
1. Select Power Off using the button.  
2. Select either Enable or Disable Power Off using the or OK  
button.  
**  
Enable  
Disable  
Uses the Power Off and sets the Power Off time.  
Does not use the Power Off.  
3. When you have selected Enable, enter the Time using the NUMERICAL (0-9) button, and  
press the OK button.  
Note: Once Power On/Off is specified, it is repeated everyday.  
**  
**  
**  
**  
GB 54  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
9.4 A/V Control  
You can set Audio or Video Output Control.  
1. Press the MENU  
2. Select Preferences using the  
OK or button.  
3. Select A/V Control using the  
button.  
button, and press the  
button, and press the  
OK  
or button.  
1. TV-SCART  
You can set TV SCART Output.  
1. Select TV-SCART using the  
button.  
2. Select one option among CVBS/RGB/S-Video using the OK  
or button.  
2. VCR SCART  
**  
**  
You can set VCR-SCART Output.  
1. Select VCR-SCART using the  
button, and press the OK  
or button.  
2. Select one option from CVBS/S-Video using the OK  
or button.  
3. Audio Output  
You can set the Audio Output.  
1. Select Audio Output using the  
button.  
2. Select one option from Stereo or Mono using the or OK  
button.  
**  
**  
**  
**  
GB 55  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Setting Preferences  
**  
4. Screen Ratio  
You can set the aspect ratio of your TV.  
1. Select Screen Ratio using the  
button.  
2. Select one option from 4:3 or 16:9 using the or OK  
button.  
5. Display Format  
You can select the Display Format according to TV Screen Ratio.  
1. Select Display Format using the  
2. If the Screen Ratio is set to '4:3', you can select one among Auto/Letter box/Center Mode  
using the button, and press the OK button.  
3. If the Screen Ratio is set to '16:9', you can select one among Auto/Pillar box/Full mode  
using the button, and press the OK button.  
button, and press the OK  
or button.  
**  
**  
**  
**  
**  
**  
GB 56  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
9.5 UHF Tuning  
You can set the UHF channel.  
1. Press the MENU  
button.  
2. Select Preferences using the  
button, and press the  
button, and press the  
OK  
3. Select UHF Tuning using the  
OK or button.  
or button.  
1. UHF Channel  
You can select UHF Channels for the TV. The Channel range and Frequency change according to  
PAL Standard.  
1. Select UHF Channel using the  
button, and press the OK  
or button.  
button, and  
2. Select channel range based on the following channel criteria using the  
press the OK  
button.  
**  
**  
**  
CH21-CH69  
CH28-CH69  
PAL I/G for Europe  
PAL B for Europe/Australia  
2. PAL  
You can select the PAL standard.  
1. Select PAL using the  
button, and press the OK  
or button.  
2. Select one option among PAL I / PAL G / PAL B using the  
button, and press the OK  
button.  
3. UHF Offset  
You can adjust fine tuning setting.  
1. Select UHF Offset using the  
button, and press the OK  
or button.  
2. Select a range between -4 ~ +4 using the  
button, and press the OK  
button.  
**  
**  
**  
**  
GB 57  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Setting Preferences  
**  
9.6 Miscellaneous Settings  
1. Press the MENU  
2. Select Preferences using the  
OK or button.  
3. Select Miscellaneous Settings using the  
button.  
button, and press the  
button,  
and press the OK  
or button.  
1. i-Plate Display Time  
You can set the duration during which the Information box is to be displayed when you switch the  
channel.  
1. Select i-Plate Display Time using the  
button, and press the OK  
or button.  
button.  
2. Select a value between 1~20 seconds using the  
button, and press the OK  
Note: When it is set to Disable, the i-Plate will not be displayed when you switch the channel.  
**  
**  
2. OSD Transparency  
You can set the transparency of On Screen Display (OSD).  
1. Select OSD Transparency using the  
button, and press the OK  
or button.  
2. Select one option among Disable / 25 / 50 / 75 using the  
button, and press the OK  
button.  
**  
Disable  
25, 50, 75  
Fully opaque screen  
As the number is bigger, the screen is more transparent.  
3. Option in CH List  
You can set whether or not to display the scrambled icon in channel list.  
1. Select Option in CH List using the button.  
2. Select one option from On/Off using the or OK  
button.  
Scramble icon displays in the channel list.  
**  
On  
Off  
Scramble icon disappears in the channel list.  
**  
**  
**  
**  
GB 58  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
10. Installation  
**  
This chapter describes how to search for channels and a series of procedures.  
10.1. Channel Search  
If your product is connected to the cable and television, you can search channels manually by  
searching parameters, if you know the MUX information.  
1. Press the MENU  
button.  
2. Select Installation using the  
button, and press the  
OK  
button. You will be prompted to enter your  
password.  
3. Select Channel Search using the  
button, and press  
the OK  
or button.  
1. Frequency  
1. Select Frequency using the  
OK or button.  
2. Select frequency value using the  
the OK button.  
button, and press the  
button, and press  
**  
**  
3. When you select User Define to set frequency manually,  
enter frequency value using the NUMERICAL (0~9 )  
button.  
2. Symbol Rate  
1. Select Symbol Rate using the  
the OK or button.  
2. Select desired symbol rate value using the  
and press the OK button.  
3. When you select User Define to set symbol rate  
button, and press  
button,  
manually, enter symbol rate value using the NUMERICAL  
(0~9 ) button.  
**  
**  
**  
**  
GB 59  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
10. Installation  
**  
3. Network Search  
1. Select Network Search using the  
button, and press  
or button.  
the OK  
or button.  
2. Select Disable or Enable using the OK  
Note: Enable allows you to use Network ID.  
4. Network ID  
1. Select Network ID using the  
OK or button.  
2. Select desired Network ID using the  
press the OK or button.  
button, and press the  
button, and  
3. If the desired value is not listed, then select User Define,  
and enter the value using the NUMERICAL (0~9) button.  
**  
**  
**  
**  
**  
**  
GB 60  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
5. Search  
You can complete the setting and start searching.  
1. Select Search and press the OK  
button to start  
Channel Search.  
2. Wait while the recorder searches for the channels, this  
may take a few minutes.  
3. During operating search, the cursor is located at Stop.  
Therefore, if you press the OK  
button during  
searching, the operation is stopped and only the channels  
found so far will be displayed.  
4. If the search operation is successfully completed, and no  
channels are found, press the OK  
button and try to  
reset the search operation again if necessary.  
5. You can delete unnecessary channels from the searched  
channels. Select your desired channels to delete and  
press the OK  
button. Then select Delete and press  
the OK button. To delete all channels, select Select  
All to select all channels, select Delete, and press the OK  
button.  
**  
**  
6. When completing channel search and deleting  
unnecessary channels, select Save, and press the OK  
button to save the changes.  
**  
**  
**  
**  
GB 61  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
10. Installation  
**  
10.2 Linear Search  
You can search channels by setting the range of frequencies and other parameters.  
1. Start Frequency and End Frequency  
1. Select Start / End Frequency using the  
press the OK or button.  
button, and  
2. Set the Start/End Frequency which the Linear Search start  
from/to in order to set the frequency range to seek.  
2. Step  
1. Select Step using the  
or button.  
button, and press the OK  
**  
**  
2. Set the step frequency that will be added start frequency.  
Your product will search channels at the increasing  
frequency by step frequency. If you don't know the value,  
please select Auto  
**  
**  
**  
**  
GB 62  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
3. Append Symbol Rate  
1. Select Append Symbol Rate using the  
button, and  
press the OK  
2. Select the symbol rate using the  
the OK button.  
or button.  
button, and press  
3. It will be displayed symbol rates that you selected.  
Product will search channels by all of symbol rates that  
you selected.  
4. Search  
You can complete the setting and start searching.  
1. Select Search and press the OK  
button to start Linear Search.  
2. The next procedures are the same as those for Channel Search. Please refer to Channel  
Search.  
**  
**  
**  
**  
**  
**  
GB 63  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
10. Installation  
**  
10.3 Default Setting  
Default Setting restores the product to the default settings  
Warning:  
Please note that once you perform Default Setting, all data such as Channel List and  
User Configured data are deleted.  
To perform Factory Default:  
1. Press the MENU  
button.  
2. Select Installation using the  
OK or button.  
3. Enter Password using the NUMERICAL (0~9) button.  
button, and press the  
4. Select Default Setting using the  
OK or button.  
5. Select Yes and press the OK  
button, press the  
button to restore all  
setting to Factory Default. Select No and press the OK  
or BACK button to return to the previous menu.  
6. Confirm again to start loading default setting. Enter  
Password using the NUMERICAL (0~9) button to  
perform restoring.  
**  
**  
7. When completing the default setting, the Installation  
Wizard will run automatically. For detailed information  
about Installation Wizard, refer to 3. Installation Wizard.  
**  
**  
**  
**  
GB 64  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
11. Software Update  
**  
In order to maintain proper performance of this product, it is essential to have the most up-to-date  
software.  
Whenever new software is released, com hem will upgrade your product via OTA.  
11.1 OTA (Over the Air)  
OTA, an abbreviation of "over-the-air" , means that the software can be downloaded where the  
manufacturer reserves the right to decide when and where to release through cable.  
Over the Air (OTA) is simply an alternative method for downloading software versions. However, the  
manufacturer reserves the right to decide when and where this software update can take place by  
latest software versions over the cable. The software update will only occur under the following  
circumstances.  
1. The equipment should have appropriate loader software.  
Caution: Please note that if you don't have normal loader software, the equipment may not be  
updated or work after software update.  
2. The manufacturer decides to release software downloading.  
**  
Caution:  
•
Please be careful to keep the power on and the power cord plugged in during software  
update. If the power is off during software update, it may cause fatal damage to the product.  
**  
**  
•
Please be careful not to pull out the Signal line during software update. Update may be  
interrupted and the product may not work.  
Note:  
•
The product cannot work at all during software update.  
It may take 5-10 minutes to update software.  
•
•
Scheduling operation cannot work during software update.  
**  
**  
**  
**  
GB 65  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
11. Software Update  
**  
1. If new software is found when powering on  
1. A message will be displayed to notify that new software is found.  
2. Select Yes and press the OK  
button to update the software.  
3. Starts downloading new software. Please wait until the update is completed.  
4. When completing the software update, the equipment is automatically powered off and on  
again.  
2. If a new version of software is detected during watching a  
programme  
1. A message will be displayed to notify that new software is  
found.  
2. Select Yes and press the OK  
button to start  
upgrading. Select No and press the OK  
button to  
return to the previous screen.  
**  
**  
**  
**  
**  
**  
GB 66  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
3. If using Software Update  
You can perform Software Update only if you know MUX information of software update correctly.  
1. Press the MENU button.  
2. Select Installation using the  
OK or button.  
3. Enter Password using the NUMERICAL (0~9) buttons.  
4. Select Software Update using the button, and  
press the OK or button.  
button, and press the  
5. Set the Frequency which provides update software.  
6. Select the Symbol Rate. You can enter the specific value  
by selecting User Define  
Note: How to setting parameters in Software  
Update is the same as how to set  
parameters in Channel Search. Refer  
to Channel Search.  
7. Select Search and press the OK  
button to search  
software.  
8. It is displayed whether or not New Software exist.  
If new software does not exist, press the OK  
return to the Software Update Menu.  
**  
**  
button to  
9. Select Yes and press the OK  
Select No and press the OK  
previous menu.  
button to start updating.  
button to return to the  
10. Performs Software Update. Please wait until it is  
completed.  
11. When completing the software update, the product is  
automatically powered off and on again.  
**  
**  
**  
**  
GB 67  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
12. System Information  
**  
You can view all system information, signal strength, and smart card information.  
1. Press the MENU  
button.  
2. Select System using the  
button, and press the OK  
or button.  
12.1 Status  
You can view System information  
1. Select Status using the  
button, and press the OK  
or button.  
2. Confirm the information about Hardware version,  
Software version, Loader version, System ID, Update  
Date.  
**  
**  
12.2 Signal Detection  
You can view the signal strength and signal quality.  
1. Select Signal Detection using the  
press the OK or button.  
button, and  
2. Display information about the graphs and percentage of  
Signal Strength and Quality of the channel.  
**  
**  
**  
**  
GB 68  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
12.3 Conditional Access (for Conax embedded)  
1. Product Ordering  
This item is for IPPV and it will be reserved until software is  
updated. When the cursor is located in this menu, there will be no  
action even after selecting.  
**  
2. Subscription Status  
This shows the authorised list of Conax channels in the smart card.  
3. Event Status  
**  
**  
This menu shows the channel ordered using PPV.  
4. Change CA PIN  
This lets you change the Smart Card PIN code.  
5. Maturity Rating  
This menu lets you set the level of authorization to watch the Conax scrambled channel.  
To watch the event beyond the set level, you should enter the Smart Card PIN code.  
6. About Conax CA  
It displays information about Conax CA - software version, interface version, card number, number of  
session, language, and conditional access system identification.  
Note: The supported functions vary depending on CAS version.  
**  
**  
**  
**  
GB 69  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
13. Games  
**  
This product provides various games for user's entertainment.  
**  
1. Press the GAME  
2. According to the instruction displayed on screen, you can enjoy the game using using the  
button, and OK button.  
button.  
**  
Note: Press the EXIT  
or BACK  
button to exit the game.  
**  
**  
**  
**  
**  
**  
GB 70  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
14. Menu Map  
**  
**  
**  
**  
This recorder doesn't support a gray item.  
**  
**  
**  
**  
GB 71  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
15. Troubleshooting  
**  
15.1 Troubleshooting  
Before contacting your local service, please read the following instructions. If the product does not  
work normally after completing the following troubleshooting, please contact your local product  
distributor or service centre.  
**  
1. The LED on the front panel does not light.  
**  
- Check the main power cable and check that it is plugged into a suitable power outlet.  
2. No picture  
**  
- Make sure that the product is in Operation Mode.  
- Make sure that the AV Cable is firmly connected to the TV.  
- Make sure that Cable line is correctly connected to the equipment.  
- Check the brightness level of TV.  
- Check the channel is on air.  
3. Poor picture & sound quality  
**  
- Make sure there is no mobile phone or microwave oven near the equipment.  
4. No or poor sound  
**  
- Check the volume level of the TV and product.  
- Check the Mute status of the TV and product.  
- Press the Audio button to change the audio type.  
5. Remote controller does not operate  
**  
**  
**  
- To manipulate the equipment with remote controller, the remote controller's emitting part  
should directly point towards the receiving part of product's remote controller.  
- Check the battery of Remote controller.  
6. Reservation is unavailable  
**  
- Check whether it is not overlapped with other reservation.  
- Check whether the power switch is off.  
7. Watching scrambled channel is not available  
**  
- Check the correct Smart Card is plugged in.  
- Check the correct smart card is plugged in, and correctly plug the smart card again.  
- Check whether the Smart Card is damaged.  
- Make sure you subscribe to the channel.  
- If the recorder has been turned off for a longer time (standby or power off), please wait for  
authorization, up to 60 minutes.  
**  
**  
**  
**  
GB 72  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
15.2 Error Message  
Error message  
Possible causes  
The cable is not connected.  
What to do  
No or bad signal  
Make sure the cable is connected  
properly.  
The cable may be damaged or  
defective.  
Exchange the cable.  
The channel is not broadcasting.  
The channel is  
scrambled or not  
available.  
The channel has signal, but no  
video.  
Confirm if the channel is currently on  
air.  
The channel is deleted by  
broadcasting company.  
The channel is for data  
broadcasting.  
Cannot watch the channel in usual  
way.  
The audio is not  
available.  
The channel has signal, but no  
Audio.  
Press the AUDIO button to confirm if  
the channel has Audio.  
No access  
No subscription to this channel.  
Make sure you subscribe to the  
channel.  
**  
**  
No authorization.  
If the recorder has been turned off  
for a longer time (standby or power  
off), please wait for authorization, up  
to 60 minutes.  
No card inserted.  
Incorrect card  
Smart card is not plugged in.  
Plug in Smart Card.  
Wrong Smart Card is plugged in.  
Plug in suitable Smart Card.  
Smart Card is not correctly plugged  
in.  
Pull out the Smart Card, and plug it  
in again.  
Smart Card is broken.  
Replace the Smart Card.  
**  
**  
**  
**  
GB 73  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
16. Specification  
**  
Tuner and Channel  
Input Connector  
Frequency Range  
Input Impedance  
Signal Level  
IEC-type, IEC-169-2, Female  
47MHz to 862MHz  
75  
-13 to +15 dBm  
Demodulation  
QAM  
Input Symbol Rate  
Constellation  
1.5-7Ms/s  
16-QAM, 32-QAM, 64-QAM, 128-QAM, 256-QAM  
MPEG Transport Stream  
A/V Decoding  
Transport Stream  
MPEG-2 ISO/IEC 13818  
Transport Stream Specification  
MPEG2 MP@ML  
Profile Level  
15 Mbit/s Max  
Input Rate  
Aspect Ratio  
Video Resolution  
Audio Decoding  
Audio Mode  
4:3, 16:9, Letter Box  
720 x 576  
**  
**  
MPEG/MusiCam Layer I and II  
Single channel/Dual channel/Joint Stereo/Stereo  
RF Modulator  
RF/Loop-through Output  
Connector  
75 , IEC 169-2  
Output Channel  
TV standard  
CH 21 ~ 69  
PAL I/G/B  
CH 36  
Preset Channel  
Memory / HDD  
Flash Memory  
Graphic (MPEG) DRAM  
EEPROM  
2M bytes  
24M bytes  
8K bytes  
80G bytes  
HDD  
**  
**  
**  
**  
GB 74  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
A/V and Data In/Out  
Video  
RCA/SCART Video Output (CVBS, S-Video, RGB)  
RCA/SCART Volume and Mute Control  
Audio R/L  
(Resolution: 20 bits DAC, MAX, 2Vrms)  
S/PDIF  
Digital Audio Output, Fiber-Optic (Resolution: 20 bits)  
Transfer Rate : 115,200bps, 9 pin Socket type  
RS-232C  
Power Supply  
Input Voltage  
Type  
90~250V AC, 50/60Hz  
SMPS  
Max. 20 W  
Power Consumption  
Standby Power  
Protection  
Max. 10W  
Separate Internal Fuse.  
The input should be protected against lightning  
Physical Specifications  
Size  
370 mm x 60 mm x 262 mm  
Around 3.5Kg  
Weight (Net)  
Operating Temp  
Storage Humidity  
**  
**  
0
to + 45  
5% ~ 95% RH(Non-Condensing)  
**  
**  
**  
**  
GB 75  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
17. Glossary  
**  
Frequency  
The number of cycles or events per one second, which is expressed in the unit of hertz  
**  
FTA (Free-To-Air)  
An unscrambled broadcast, which you can view without additional payments to a service provider.  
**  
Hi-Fi (High Fidelity)  
The characteristics of audio devices that can play back all the audio frequencies of the human, which  
is the range of 16Hz~20KHz, uniformly from the low frequency to high frequency. Sometimes it is  
used to indicate good quality of an audio device such as stereo tape recorder.  
**  
OSD (On Screen Display)  
The function that displays the information about the monitor that the user needs or has to know on  
the screen directly. OSD information includes brightness, contrast, tuning, RGB adjustment, and  
screen size and positions (top, left, width, and height), and so on.  
**  
OTA (Over The Air)  
Means that software downloads where the manufacturer reserves the right to decide when and  
where to release them.  
**  
Programme Guide (Electronic Programme Guide, EPG)  
An electronic programme guide provides on-screen listing of current and scheduled programmes.  
Multi-functional Set Top Box such as Personal Video Recorder allows the viewer to record an  
**  
**  
upcoming programme.  
**  
SCART  
A 21-pin connector used for connection of this product, VCR and TV. Also called Euroconnector or  
Peritel connector.  
**  
S/PDIF (Sony/Philips Digital Interface format)  
Standard format for digital audio output. It outputs audio signals directly as digital audio signals  
without changing into analog signals because conversion into analog signals can degrade signal  
quality.  
**  
**  
**  
**  
GB 76  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
18. Service and Support  
**  
You can get information such as a troubleshooting guide, software upgrades and product support  
guide from the following web sites and call center (Hotline).  
Please try to contact to your local dealers first when you have any problem.  
Web site and e-mail  
Homepage  
http://www.humaxdigital.com  
English  
Deutsch  
Arabic  
http://www.humaxdigital.com/Deutsch/  
http://www.humaxarabia.com  
**  
HCSA (Humax Customer Service Area)  
Software Download, Information and Technical Q&A  
http://www.humaxdigital.com/hcsa/  
English  
http://www.humaxdigital.com/Deutsch/hcsa/  
Deutsch  
**  
E-mail (Technical Q&A)  
**  
**  
[email protected]  
[email protected]  
Europe & North Africa  
Germany  
[email protected]  
[email protected]  
Middle East  
Asia & Other area  
**  
**  
**  
**  
GB 77  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
18. Service and Support  
**  
Call Center  
Humax Middle East Call Center (Dubai, UAE)  
Tel:  
+971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday)  
[email protected]  
E-mail:  
Open:  
Local Time in Dubai (GMT+4)  
9:00 - 20:00 (Saturday - Thursday, close on Friday)  
Support Language: English/Arabic  
**  
Humax Hotline (Germany)  
Germany:  
Other Countries:  
Open:  
01805 778 870 ( 0,12/Min)  
+ 49 1805 778 870 ( 0,12/Min+ International Call Charge)  
Local Time in Germany (GMT+1)  
8:00 - 20:00 (Monday - Friday)  
8:00 - 18:00 (Saturday)  
Support Language: Deutsch/English  
**  
**  
**  
Humax BTCI Hotline (Premiere Model)  
Germany:  
Austria:  
01805-778900 ( 0,12/Min)  
0900-900633 ( 0,33/Min)  
**  
For hardware repair, please refer to support website. (Homepage or HCSA)  
**  
**  
**  
**  
GB 78  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Car Stereo System G4014 User Manual
Harbor Freight Tools Lawn Mower 96156 User Manual
Hawking Technology Network Card 202 10248 01 User Manual
Hotpoint Freezer RSA 21 User Manual
Hotpoint Microwave Oven BS42 BS52 User Manual
HP Hewlett Packard Tablet E0H92AA#ABA User Manual
Hyundai Automobile PDF Ebook Library User Manual
IBM Computer Drive 7214 User Manual
IBM Switch DS3000 Series User Manual
Iiyama Car Video System E2001WS User Manual