Hotpoint Washer BS 1400 User Manual

Instructions for Installation and Use  
Washing machine  
Model BS 1400  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instructions for use  
WASHING MACHINE  
Contents  
GB  
Installation, 2-3-4-5  
Unpacking and levelling, 2  
Electric and water connections, 2-3  
The first wash cycle, 4  
GB  
English,1  
Technical details, 5  
Washing machine description, 6-7  
Control panel, 6  
Display, 7  
Starting and Programmes, 8  
Briefly: how to start a programme, 8  
Programme table, 8  
Personalisations, 9  
Setting the spin cycle, 9  
Setting the temperature, 9  
Setting the Delay Start, 9  
Functions, 9  
BS 1400  
Detergents and laundry, 10  
Detergent dispenser, 10  
Bleach cycle, 10  
Preparing your laundry, 10  
Special items, 10  
Woolmark Platinum Care, 10  
Precautions and advice, 11  
General safety, 11  
Disposal, 11  
Saving energy and respecting the environment, 11  
Care and maintenance, 12  
Cutting off the water or electricity supply, 12  
Cleaning your appliance, 12  
Caring for your appliance door and drum, 12  
Cleaning the pump, 12  
Checking the water inlet hose, 12  
Troubleshooting, 13  
Service, 17  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
! Keep this instruction manual in a safe place for  
future reference. Should the appliance be sold,  
transferred or moved, make sure the instruction  
manual accompanies the washing machine to inform  
the new owner as to its operation and features.  
Levelling your appliance correctly will provide it with  
stability and avoid any vibrations, noise and shifting  
during operation. If it is placed on a fitted or loose  
carpet, adjust the feet in such a way as to allow  
enough room for ventilation beneath the washing  
machine.  
GB  
! Read these instructions carefully: they contain  
vital information on installation, use and safety.  
Electric and water connections  
Unpacking and levelling  
Connecting the water inlet hose  
Unpacking  
1. Insert seal A into the  
end of the inlet hose  
and screw the latter  
onto a cold water tap  
with a 3/4 gas threaded  
1. Unpack the washing machine.  
2. Check whether the washing machine has been  
damaged during transport. If this is the case, do  
not install it and contact your retailer.  
A
mouth (see figure).  
Before making the  
3. Remove the 2  
protective screws and  
the rubber washer with  
the respective spacer,  
situated on the rear of  
the appliance (see  
figure).  
connection, allow the  
water to run freely until  
it is perfectly clear.  
2. Connect the other end  
of the water inlet hose to  
the washing machine,  
screwing it onto the  
appliance's cold water  
inlet, situated on the top  
right-hand side on the  
rear of the appliance  
(see figure).  
4. Seal the gaps using the plastic plugs provided.  
5. Keep all the parts: you will need them again if  
the washing machine needs to be moved to  
another location.  
! Packaging materials are not children's toys.  
3. Make sure there are no kinks or bends in the hose.  
Levelling  
! The water pressure at the tap must be within the  
values indicated in the Technical details table  
(on the next page).  
Your machine may make a considerable amount of  
noise if the two front feet have not been adjusted  
correctly.  
! If the water inlet hose is not long enough,  
contact a specialist store or an authorised  
serviceman.  
1. Install the washing machine on a flat sturdy floor,  
without resting it up against walls, furniture cabinets  
or other.  
2. If the floor is not  
perfectly level, compen-  
sate for any unevenness  
by tightening or  
loosening the adjustable  
feet (see figure); the  
angle of inclination,  
measured according to  
the worktop, must not  
exceed 2°.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the drain hose  
Your appliance is now supplied with a 13 amp fused  
plug it can be plugged into a 13 amp socket for  
immediate use. Before using the appliance please  
read the instructions below.  
GB  
Connect the drain  
hose, without bending  
it, to a draining duct or  
a wall drain situated  
between 65 and 100 cm  
from the floor;  
WARNING - THIS APPLIANCE MUST BE EARTHED.  
THE FOLLOWING OPERATIONS SHOULD BE  
CARRIED OUT BY A QUALIFIED ELECTRICIAN.  
65 - 100 cm  
Replacing the fuse:  
When replacing a faulty fuse, a 13 amp ASTA  
approved fuse to BS 1362 should always be used,  
and the fuse cover re-fitted. If the fuse cover is  
lost, the plug must not be used until a  
replacement is obtained.  
alternatively, place it  
over the edge of a  
basin, sink or tub,  
Replacement fuse covers:  
If a replacement fuse cover is fitted, it must be of  
the correct colour as indicated by the coloured  
marking or the colour that is embossed in words on  
the base of the plug. Replacements can be obtained  
directly from your nearest Service Depot.  
fastening the duct  
supplied to the tap  
(see figure). The free  
end of the hose should  
not be underwater.  
Removing the plug:  
If your appliance has a non-rewireable moulded  
plug and you should wish to re-route the mains  
cable through partitions, units etc., please ensure  
that either:  
! We advise against the use of hose extensions; in  
case of absolute need, the extension must have  
the same diameter as the original hose and must  
not exceed 150 cm in length.  
the plug is replaced by a fused 13 ampere re-  
wearable plug bearing the BSI mark of approval.  
or:  
lectric connection  
the mains cable is wired directly into a 13 amp  
cable outlet, controlled by a switch, (in compliance  
with BS 5733) which is accessible without moving  
the appliance.  
Before plugging the appliance into the mains  
socket, make sure that:  
the socket is earthed and in compliance with  
the applicable law;  
Disposing of the plug:  
Ensure that before disposing of the plug itself,  
you make the pins unusable so that it cannot be  
accidentally inserted into a socket.  
the socket is able to sustain the appliance's  
maximum power load indicated in the Technical  
details table (see page 5);  
Instructions for connecting cable to an alternative plug:  
Important: the wires in the mains lead are  
coloured in accordance with the following code:  
the supply voltage is included within the values  
indicated on the Technical details table  
(see page 5);  
Green & Yellow  
Blue  
Brown  
Earth  
Neutral  
Live  
the socket is compatible with the washing  
machine's plug. If this is not the case, replace  
the socket or the plug.  
As the colours of the wires in the lead may not  
correspond with the coloured markings identifyng  
the terminals in your plug, proceed as follows:  
Connect Green & Yellow wire to terminal marked E  
or  
or coloured Green or Green & Yellow.  
Connect Brown wire to terminal marked L or  
coloured Red.  
Connect Blue wire to terminal marked N or  
coloured Black.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
If a 13 amp plug (BS 1363) is used it must be fitted  
with a  
The first wash cycle  
GB  
13 amp fuse, either in the plug or adaptor or at the  
distribution board.  
Once the appliance has been installed, and before  
you use it for the first time, run a wash cycle with  
detergent and no laundry, setting the 90°C  
programme without a pre-wash cycle.  
If you are in any doubt the electrical supply to your  
machine, consult a qualified electrician before use.  
How to connect an alternative plug:  
The wires in this mains lead are coloured in  
accordance with the following code:  
BLUE  
BROWN  
GREEN & YELLOW  
NEUTRAL (N)  
LIVE (L)  
EARTH (E)  
Disposing of the appliance:  
When disposing of the appliance please remove  
the plug by cutting the mains cable as close as  
possible to the plug body and dispose of it as  
described above.  
GREEN &  
YELLOW  
13 ampere fuse  
BROWN  
CROSS-BAR  
CORD GRIP  
BLUE  
! The washing machine should not be installed in an  
outdoor environment, not even when the area is  
sheltered, because it may be very dangerous to  
leave it exposed to rain and thunderstorms.  
! When the washing machine is installed, the mains  
socket must be within easy reach.  
! Do not use extensions or multiple sockets.  
! The power supply cable must never be bent or  
dangerously compressed.  
! The power supply cable must only be replaced by  
an authorised serviceman.  
Warning! The company denies all liability if and  
when these norms are not respected.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
Technical details  
Model  
BS 1400  
68,6 cm wide  
100 cm high  
72,5 cm deep  
Dimensions  
Capacity  
from 1 to 8,5 kg  
Electric  
connections  
voltage 230/240 Volts 50 Hz  
maximum absorbed power 2500 W  
maximum pressure 1 MPa (10 bar)  
minimum pressure 0.05 MPa (0.5 bar)  
drum capacity 80 litres  
Water  
connections  
Spin speed  
up to 1400 rpm  
Control  
programmes  
according to  
IEC456 directive  
programme C; temperature 60°C;  
run with a load of 8,5 kg.  
This appliance is compliant with the  
following European Community  
Directives:  
- 73/23/CEE of 19/02/73 (Low  
Voltage) and subsequent  
amendments - 89/336/CEE of  
03/05/89 (Electromagnetic  
Compatibility) and subsequent  
amendments  
- 2002/96/CE  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing machine description  
Control panel  
GB  
ON/OFF  
button  
FUNCTION  
buttons  
Display  
Control knob  
START/CANCEL  
button  
SPIN  
TEMPERATURE  
DELAYSTART  
KEYBOARD  
LOCK  
Programme key: to  
consult a  
DELAY START button to delay the start of the set  
programme for a maximum period of 24 hours  
(see page 9).  
straightforward chart  
of the different  
programmes available  
turn the lower part  
outwards to open it.  
KEYBOARD LOCK key. To lock all the keys on the  
washing machine during operation or during Stand-  
by mode.  
Display to programme the washing machine and  
follow the wash cycle progress (see opposite page).  
FUNCTION buttons to select the functions  
available. The button corresponding to the  
function selected will remain on.  
ON/OFF button to turn the washing machine on  
and off (see page 8).  
START/CANCEL button to start the programmes  
or cancel any incorrect settings (see page 8).  
N.B.: For safety reasons (eg. to avoid children  
climbing into the drum), if there is no electricity  
for more than two minutes the washing machine  
will not restart unless the START/CANCEL button  
is pressed.  
SPIN button to adjust the spin speed or exclude it  
altogether (see page 9).  
TEMPERATURE button to adjust the wash tempe-  
rature (see page 9).  
Control knob to select the wash programmes.  
The knob stays still during the cycle.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display  
GB  
In addition to being a practical tool to programme your appliance (see page 9), the display provides useful  
information concerning the wash cycle and status.  
Once you have pressed the START/CANCEL button to  
start the programme, the display will indicate the  
amount of time left until the end of the wash cycle. If a  
delayed start has been set (using the Delay Start, see  
page 9), the delay time will be indicated on the display.  
The following information is displayed during the wash  
cycle:  
Cycle phase under way:  
Pre-wash  
Wash cycle  
Rinse  
Spin cycle  
Customised functions and options:  
To select functions and options, see below and on  
page 9.  
Buzzer:  
Your washing machine comes with a buzzer, which will  
inform you of the various functions being carried  
out, or of any malfunctions: incompatibility, option/  
programme keys, start, end of cycle, reset.  
Keyboard lock:  
For your safety and that of your children, you can block all the keys during the machine's operation or  
during waiting position (delayed start - Stand-by) by pressing the function key for 2 seconds.  
To disable this function, hold the same button down for 4 seconds.  
Door lock:  
If the symbol is on, the washing machine door is locked to prevent it from being opened accidentally. To  
avoid any damages, wait for the symbol to switch itself off before you open the appliance door.  
This model is equipped with a device that enables the door to be opened during the course of the wash cycle  
(however, this is only an option in phases where the safety conditions are guaranteed). To carry out this  
task, switch off the machine (by pressing the ON/OFF button), open the door, load the necessary clothes or  
detergent, close it again, switch the machine back on by pressing the ON/OFF button and press the START/  
CANCEL button. The machine will restart the wash cycle from the point at which it was interrupted.  
At the end of the programme, the word END is displayed.  
! In the event of an anomaly, an error code will appear, such as: F-01, (see page 13).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting and Programmes  
5. Select any function (see page 9).  
6. Start he programme by pressing the START/  
CANCEL button.  
To cancel it, keep the START/CANCEL button  
pressed for at least 2 seconds.  
7. When the programme has ended, the word END is  
displayed. Take out your laundry and leave the  
appliance door ajar to allow the drum to dry  
thoroughly.  
Briefly: starting a programme  
GB  
1. Turn the washing machine on by pressing button  
All the icons will light up for a few seconds and  
then go off.  
2. Add the detergent and any fabric softener (see page 10).  
3. Load your laundry into the washing machine (see  
page 10) and shut the appliance door.  
4. Set the knob to the desired programme. The  
estimated duration of the selected programme is  
displayed. The temperature and spin speed are  
automatically set according to the programme  
(to change them, see page 9).  
.
If you wish to start a new wash cycle, the door  
must be opened and shut for safety reasons  
before the START/CANCEL button is pressed again.  
8. Turn the washing machine off by pressing button  
.
Programme table  
Max. Cycle  
Load length  
(Kg.) (minutes)  
Detergent  
Type of fabric and degree of  
soil  
Wash  
temp.  
Fabric  
softener  
Progr.  
Description of wash cycle  
Pre-  
wash  
Wash  
Standard  
Extremely soiled whites  
(sheets, tablecloths, etc.)  
Pre-wash, wash cycle, rinse cycles,  
intermediate and final spin cycles  
A
B
C
D
E
F
160  
140  
125  
90  
90°C  
90°C  
60°C  
40°C  
50°C  
40°C  
30°C  
8,5  
8,5  
8,5  
8,5  
4
Extremely soiled whites  
(sheets, tablecloths, etc.)  
Wash cycle, rinse cycles,  
intermediate and final spin cycles  
Heavily soiled whites and fast  
colours  
Wash cycle, rinse cycles,  
intermediate and final spin cycles  
Slightly soiled whites and delicate  
colours (shirts, jumpers, etc.)  
Wash cycle, rinse cycles,  
intermediate and final spin cycles  
Heavily soiled fast colours  
(baby linen, etc.)  
Wash cycle, rinse cycles and delicate  
spin cycle  
90  
Fast colours (all types of  
slightly soiled garments)  
Wash cycle, rinse cycles and delicate  
spin cycle  
4
75  
Delicate colours (all types of  
slightly soiled garments)  
Wash cycle, rinse cycles and delicate  
spin cycle  
G
4
30  
Delicates  
Wash cycle, rinse cycles and delicate  
spin cycle  
Wool  
H
J
40°C  
30°C  
3
3
60  
80  
Very delicate fabrics  
(curtains, silk, viscose, etc.)  
Wash cycle, rinse cycles, anti-crease  
Big Size Load  
Wash cycle, rinse cycles,  
intermediate and final spin cycles  
Bed & Bath  
K
L
60°C  
30°C  
30°C  
40°C  
6,5  
4
90  
75  
65  
70  
Wash cycle, rinse cycles, anti-crease  
intermediate and final spin cycles  
Feather duvets  
Synthetic duvets  
Woollen blankets  
Wash cycle, rinse cycles, anti-crease  
intermediate and final spin cycles  
M
N
4
Wash cycle, rinse cycles,  
intermediate and final spin cycles  
4
Specials  
Rinse  
Rinse cycles and spin cycle  
Draining and spin cycle  
Draining  
Spin  
Drain  
Notes  
- To ensure the machine operates correctly and is able to achieve the best possible washing performance,  
werecommend that the maximum load indicated is not exceeded.  
- For the anti-crease function: see Easy iron, opposite page.The information contained in the table is purely indicative.  
Daily Wash - 30mins.  
Programme G for Synthetics is designed to wash lightly soiled garments in a short amount of time: it only lasts  
30 minutes and allows you to save on both time and energy. By setting this programme (G at 30°C), you can wash  
different fabrics together (except for woollen and silk items), with a maximum load of 4 kg (see page 10).  
We recommend the use of liquid detergent.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Personalisations  
Setting the spin cycle  
If, when the appliance is switched on, the KNOB is positioned  
GB  
on a programme with a spin cycle, a fixed  
appears. Press  
button  
programme set will be displayed, and the  
and the maximum spin speed allowed for the  
icon flashes.  
Press it again and the values lower until they reach OFF, which  
indicates that the spin cycle has been excluded (press it again  
to go back to the maximum value); stop on the desired speed,  
after approximately 2 seconds the setting is accepted: the  
symbol remains fixed. The spin cycle setting is enabled  
with all the programmes except for J and the Draining cycle.  
Option buttons  
Setting the temperature  
If, when the appliance is switched on, the KNOB is positioned on a programme for which the temperature  
needs to be regulated, a fixed  
programme set will be displayed and the  
appears. Press button  
and the maximum temperature allowed for the  
icon flashes. Press it again and the temperature lowers until it  
reaches OFF, which indicates a cold wash cycle (press it again to go back to the maximum value); stop on  
the desired value, after approximately 2 seconds the setting is accepted: the symbol  
The temperature adjustment is enabled with all wash programmes.  
remains fixed.  
Setting the Delay Start  
Press the button  
and you will see the word OFF on the display, while the relative symbol flashes.  
Press the button again and "1h" appears, that is, a delay of one hour (this can reach up to 24h); stop on the  
"desired" delay; after approximately 2 seconds the setting is accepted, following which, the time for the  
set programme appears on the display and the symbol  
remains on.  
If you now press the START/CANCEL button, the set "delay" appears; this decreases every hour until the  
start of the cycle. In this phase, the "delay" can only be modified by decreasing it.  
The Delay Start regulation is enabled with all programmes.  
For safety reasons (for example: preventing children from climbing into the drum and locking themselves  
in), if the door is opened or closed before the effective start of the cycle, it will be necessary to press the  
START/CANCEL button again.  
Keyboard Lock (see page 7).  
Functions  
To enable a function:  
1. press the button corresponding to the desired function, according to the table below;  
2. the function is enabled when the corresponding button is illuminated.  
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.  
If you set a function that is incompatible with another function you selected previously, only the last one selected will be enabled.  
Enabled with  
programmes:  
Function Effect  
Comments  
Allows for an impeccable  
wash, visibly whiter than a  
standard Class A wash.  
A, B, C, D, E, F, K  
Super  
Wa sh  
Use this function when the laundry that needs to be  
washed is equal to or less than half the recommended  
max. load (see Programme table).  
A, B, C, D, E, F, H,  
K, L, M, Rinse  
cycle.  
Reduces water and  
energy consumption and  
wash cycle times.  
Mini  
Load  
Reduce the amount of detergent accordingly.  
If you set this option, programmes E, F, J, L, M will be  
suspended, leaving the laundry to soak (Anti-crease)  
and EASY IRON button will flash:  
This option reduces the  
amount of creasing on  
fabrics, making them  
easier to iron.  
C, D, E, F, J, K, L, M,  
Rinse cycle.  
- to conclude the cycle, press the START/CANCEL  
button or the EASY IRON button;  
Easy  
Iron  
- to run the draining cycle alone, set the knob to the  
relative symbol  
and press the START/CANCEL button.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detergents and laundry  
Detergent dispenser  
Sturdy fabrics: max 8,5 kg  
GB  
Synthetic fabrics: max 4 kg  
Delicate fabrics: max 3 kg  
Wool (Clothing): max 3 kg  
Wool (Blankets): max 4 kg  
Good washing results also depend on the correct  
dose of detergent: adding too much detergent  
won't necessarily make for a more efficient wash,  
and may in fact cause build up on the interior of  
your appliance and even pollute the environment.  
How much does your laundry weigh?  
1 sheet 400-500 g  
The detergent dispenser is located inside the tub;  
to access it the door must be opened.  
1 pillow case 150-200 g  
1 tablecloth 400-500 g  
1 bathrobe 900-1200 g  
1 towel 150-250 g  
! Do not exceed the  
maximum load level of  
your laundry for each  
type of fabric, as  
indicated on the label in  
the internal part of the  
door (see figure):  
A = Cotton  
Open up the detergent  
dispenser (see figure)  
and pour in the  
B = Wool  
C = Synthetics  
detergent and fabric  
softener, as follows.  
Special items  
Curtains: fold curtains and place them in a pillow  
case or mesh bag. Wash them separately without  
exceeding half the appliance load. Use programme  
J which excludes the spin cycle automatically.  
Trainers: remove any mud. They can be washed  
together with jeans and other tough garments,  
but not with whites.  
1
2
3
compartment 1: Detergent for pre-wash  
(or bleach if carrying out the bleach cycle)  
Woolmark Platinum Care  
compartment 2: Detergent for the wash cycle  
compartment 3: Additives (fabric softeners, etc.)  
As gentle as a hand wash.  
Hotpoint is the only washing machine to have  
obtained the prestigious Woolmark Platinum  
Care Plus mark of recognition (M.0505) from The  
Woolmark Company, the organisation that certifies  
the machine washing of all woollen garments.  
Programme no. H - Wool - can even be used to wash  
! When closing the door, the detergent dispenser  
closes automatically.  
! Do not use hand wash detergent because it may  
form too much foam.  
garments whose labels specify "hand wash only"  
and guarantees optimum performance levels while  
providing complete fabric care.  
,
Preparing your laundry  
Programme no. N - Woollen blankets - can be used to  
wash large items made using pure virgin wool (not  
pile), for example blankets, quilts, etc. The  
programme also enables products of this type  
P
! Unfold all garments completely before placing them  
inside the washing machine.  
Divide your laundry according to:  
whose labels specify "dry clean only"  
to be  
- the type of fabric/the symbol on the label.  
- the colours: separate coloured garments from whites.  
Empty all pockets and check for loose buttons.  
Do not exceed the weight limits stated below,  
which refer to the weight when dry:  
washed, and offers the best performance levels  
while guaranteeing complete fabric care. You should,  
however, check that the description "machine  
40  
washable" is present on the label of any items  
made using pile before washing them in the machine.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions and advice  
! The washing machine was designed and built in  
compliance with the applicable international safety  
regulations. The following information is provided for  
your safety and should consequently be read carefully.  
bin" symbol on the product reminds you of your  
obligation, that when you dispose of the  
appliance it must be separately collected.  
GB  
Consumers should contact their local authority  
or retailer for information concerning the  
correct disposal of their old appliance.  
General safety  
This washing machine should only be used by  
adults and in accordance with the instructions  
provided in this manual.  
Saving energy and respecting the  
environment  
Never touch the washing machine when  
barefoot or with wet or damp hands or feet.  
Environmentally-friendly technology  
If you only see a little water through your  
appliance door, this is because thanks to the  
latest Ariston technology, your washing machine  
only needs less than half the amount of water to  
get the best results: an objective reached to  
respect the environment.  
Do not pull on the power supply cable to unplug  
the appliance from the electricity socket. Pull  
the plug out yourself.  
Do not touch the drain water as it could reach  
very high temperatures.  
Never force the washing machine door: this  
could damage the safety lock mechanism  
designed to prevent any accidental openings.  
Saving on detergent, water, energy and time  
To avoid wasting resources, the washing  
machine should be used with a full load. A full  
load instead of two half loads allows you to save  
up to 50% on energy.  
In the event of a malfunction, do not under any  
circumstances touch internal parts in order to  
attempt repairs.  
The pre-wash cycle is only necessary on  
extremely soiled garments. Avoiding it will save  
on detergent, time, water and between 5 and  
15% energy.  
Always keep children well away from the  
appliance while in operation.  
The appliance door tends to get quite hot during  
the wash cycle.  
Treating stains with a stain remover or leaving  
them to soak before washing will cut down the  
need to wash them at high temperatures. A  
programme at 60°C instead of 90°C or one at  
40°C instead of 60°C will save up to 50% on energy.  
Should it have to be moved, proceed with the  
help of two or three people and handle it with  
the utmost care. Never try to do this alone,  
because the appliance is very heavy.  
Before loading your laundry into the washing  
machine, make sure the drum is empty.  
Use the correct quantity of detergent  
depending on the water hardness, how soiled  
the garments are and the amount of laundry  
you have, to avoid wastage and to protect the  
environment: despite being biodegradable,  
detergents do contain ingredients that alter  
the natural balance of the environment. In  
addition, avoid using fabric softener as much as  
possible.  
Before starting the cycle, make sure the level  
of maximum load of your laundry is respected.  
Before starting the cycle, make sure the level  
of maximum load of your laundry is respected.  
Disposal  
Disposing of the packaging material:  
observe local regulations, so the packaging can  
be re-used.  
If you use your washing machine from late in the  
afternoon until the early hours of the morning,  
you will help reduce the electricity board's peak  
load. The Delay Start option (see page 9) helps  
to organise your wash cycles accordingly.  
The European Directive 2002/96/EC on Waste  
Electrical and Electronic Equipment,  
requires that old household electrical appliances  
must not be disposed of in the normal unsorted  
municipal waste stream. Old appliances must be  
collected separately in order to optimise the  
recovery and recycling of the materials they  
contain and reduce the impact on human health  
and the environment. The crossed out "wheeled  
If your laundry has to be dried in a tumble dryer,  
select a high spin speed. Having the least water  
possible in your laundry will save you time and  
energy in the drying process.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and maintenance  
Cutting off the water or electricity  
supply  
5. reposition the panel, making sure the hooks are  
securely in place before you push it onto the  
appliance.  
GB  
Turn off the water tap after every wash. This  
will limit the wear of your appliance's water  
system and also prevent leaks.  
Checking the water inlet hose  
Unplug your appliance when cleaning it and  
during all maintenance operations.  
Check the water inlet hose at least once a year. If  
you see any cracks, replace it immediately: during  
the wash cycles, water pressure is very strong  
and a cracked hose could easily split open.  
Cleaning your appliance  
The exterior and rubber parts of your appliance can  
be cleaned with a soft cloth soaked in lukewarm  
soapy water. Do not use solvents or abrasives.  
! Never use hoses that have already been used.  
Caring for your appliance door and drum  
Always leave the appliance door ajar to prevent  
unpleasant odours from forming.  
Cleaning the pump  
The washing machine is fitted with a self-cleaning  
pump that does not require any maintenance.  
Sometimes, small items (such as coins and buttons)  
may fall into the pre-chamber that protects the  
pump, situated in the lower part of the same.  
! Make sure that the wash cycle has ended and  
unplug the appliance.  
To access the pre-chamber:  
1. remove the cover  
panel (in the lower  
front of the washing  
machine), prizing it on  
both sides with a  
screwdriver. Do not  
force it.  
2. unscrew the lid  
rotating it in anti-  
clockwise. A little  
water may trickle out  
(about 1 liter). Put a  
little container under  
the hole.  
3. clean the interior  
thoroughly.  
4. screw the lid back on.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Your washing machine could fail to work. Before calling for Assistance (see pages 17-18), make sure the  
problem can't easily be solved by consulting the following list.  
GB  
Possible causes/Solution:  
Problem  
The appliance is not plugged into the socket, or not enough to  
make contact.  
There has been a power failure.  
The washing machine won't start.  
The appliance door is not shut properly (the word DOOR is displayed).  
The  
The wash cycle won't start.  
button has not been pressed.  
The START/CANCEL button has not been pressed.  
The water tap is not turned on.  
A delayed start has been set (using the Delay Start, see page 9).  
The water inlet hose is not connected to the tap.  
The hose is bent.  
The water tap is not turned on.  
The washing machine fails to load  
water (The wording H2O is  
displayed).  
There is a water shortage.  
The water pressure is insufficient.  
The START/CANCEL button has not been pressed.  
The drain hose is not fitted between 65 and 100 cm from the floor (see page 3).  
The free end of the hose is underwater (see page 3).  
The wall drainage system doesn't have a breather pipe.  
The washing machine continuously  
loads and unloads water.  
If the problem persists even after these checks, turn off the water tap, switch  
the appliance off and call for Assistance. If the dwelling is on one of the upper  
floors of a building, there may be drain trap problems causing the washing  
machine to load and unload water continuously. In order to avoid such an  
inconvenience, special anti-drain trap valves are available in shops.  
The programme does not foresee the draining: some programmes  
require enabling the draining manually (see page 8).  
The Easy iron option is enabled: to complete the programme, press  
the START/CANCEL button (see page 9).  
The washing machine does not  
drain or spin.  
The drain hose is bent (see page 3).  
The drain duct is clogged.  
When the machine is installed, the locking screws for the oscillating  
assembly are still in place. Remove the screws (see page 2).  
The washing machine is not level (see page 2).  
The washing machine is closed in between furniture cabinets and  
the wall (see page 2).  
The washing machine vibrates too  
much during the spin cycle.  
The water inlet hose is not screwed on correctly (see page 2).  
The detergent dispenser is obstructed.  
The drain hose is not secured properly (see page 3).  
The washing machine leaks.  
This means there is a problem with the machine. Before calling  
Assistance, please follow the set of instructions below:  
1. Switch off the machine;  
The machine is locked and the display  
flashes, indicating an error code (e.g.  
F-01, F-..).  
2. Remove the plug connecting the appliance to the mains supply  
and wait for at least 40 seconds.;  
3. Place the plug back into the socket;  
4. Switch on the machine;  
5. If the problem is still evident after this process has been carried out,  
contact Assistance.  
The detergent is not suitable for machine washing (it should bear the  
definition "for washing machines" or "hand and machine wash", or the like).  
You used too much detergent.  
There is too much foam.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION - Please Read Carefully  
This appliance is designed for domestic use only.  
GB  
We may be able to offer service cover under our 12-month guarantee for this appliance provided  
that we are satisfied that it has:  
-
-
-
-
-
Not been used to generate revenue.  
Not been used on premises where the total number of rooms serviced by it exceeds 15.  
Only been installed and operated in accordance with the manufacturer's handbook.  
Been properly connected to a suitable electrical supply as stated on the rating plate on the appliance.  
Only been used in premises situated within the United Kingdom or Republic of Ireland.  
The availability of the 12-month guarantee where the appliance is being used in a non-domestic  
situation is entirely at our discretion.  
This appliance is heavier than most domestic washing machines. Our service engineers will use their best  
endeavours to avoid damage to property or flooring when carrying out either service or repairs. If our  
engineer is of the opinion that the appliance cannot be moved without damage being caused, then he will only  
proceed to move the appliance upon your acceptance that we cannot be responsible for any such damage.  
We would also remind you of the general exclusions of our guarantee. It does not cover the following:  
1) No fault found / customer advice given on engineer visit. 2) Misuse. 3) Accidental damage.  
4) Malicious damage. 5) Rectification of faulty repairs by non authorised personnel.  
6) Modifications to equipment. 7) Connections to gas, electricity, water supplies.  
8) Moving or re-siting appliances. 9) Rectifying problems due to gas, electricity, water supplies.  
10) Rectifying cosmetic problems - e.g. scratches, dents, surface marks (if these have not been  
notified to us within 72 hours of delivery). 11) Rectifying damage caused by water, fire, frost.  
12) Trapped or kinked fill and drain hoses. 13) Rectifying faulty installations. 14) Faults caused by  
failure to remove all packaging materials - e.g. transit bolts. 15) Pumps blocked by extraneous  
objects - e.g. coins. 16) Replacement of consumables. 17) Degradation to glass, ceramic and steel  
surfaces due to normal wear and tear. 18) Damage caused by limescale or detergents.  
19) Routine maintenance and cleaning.  
5 Year Parts Guarantee  
Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on  
you registering your appliance with us and the parts being fitted by one of our authorised  
engineers. There will be a charge for our engineer's time. To activate the extra parts warranty on  
your appliance, simply call our registration line on 0870 6092094 (ROI 01 230 0800).  
Extended Guarantees  
We offer a selection of repair protection plans that enable you to fully cover yourself against the  
expense of repair bills for the life of your policy. To find the ideal plan for you please call our advice  
line on 08709 088 088 (ROI 01 230 0233).  
Free Helpdesk Service  
We have a dedicated team who can provide free advice and assistance with your appliance if you  
experience any technical difficulties within the first 90 days of ownership. Simply call our Hotpoint  
Service Hotline on 08709 066 066 (ROI 0818 313 413) for telephone assistance, or, where  
necessary, to arrange for an engineer to call. If we cannot resolve the technical problem we will  
replace your machine or, if you prefer, give you your money back.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After Sales Service  
No one is better placed to care for your Hotpoint appliance during the course of its working life  
than us - the manufacturer.  
Essential Contact Information  
Hotpoint Service  
We are the largest service team in Europe offering you access to 400 skilled telephone advisors  
and 1100 fully qualified engineers on call to ensure you receive fast, reliable, local service.  
UK: 08709 066 066  
Republic of Ireland: 0818 313 413  
Please note: Our advisors will require the following information:  
Model number:  
Serial number:  
Parts and Accessories  
We supply a full range of genuine replacement parts as well as accessory products that protect and  
hygienically clean your appliance to keep it looking good and functioning efficiently throughout its life.  
UK: 08709 077 077  
Republic of Ireland: 0818 313 413  
Appliance Registration  
We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts  
guarantee you must register your appliance with us.  
UK: 0870 6092094  
Republic of Ireland: 01 230 0800  
Indesit Company UK Ltd. Morley Way, Peterborough, PE2 9JB  
Indesit Company Unit 49 Airways Industrial Estate,Dublin 17  
Recycling & Disposal Information  
As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right to  
use quality, recycled components to keep down customer costs and minimise material wastage.  
Please dispose of packaging and old appliances carefully. To minimise the risk of injury to children,  
remove the door, plug and cut the mains cable off flush with the appliance. Dispose of these parts  
separately to ensure that the appliance can no longer be plugged into a mains socket, and the door  
cannot be locked shut.  
June 2006  
195.052.642.02  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Baby Playpen 1750167 User Manual
Greenway Home Products Indoor Fireplace GEF252AEE User Manual
Grizzly Air Compressor H6310 User Manual
HANNspree Flat Panel Television 1506 0B86000 User Manual
Harman Kardon Speaker System SoundSticks III User Manual
Harman Kardon Stereo Receiver AVR 2000 User Manual
HP Hewlett Packard Fish Finder 5345A User Manual
Huawei Cordless Telephone ETS5623 User Manual
IBM Welding System X41 User Manual
IKEA Indoor Furnishings AA 219968 3 User Manual