HDA3600/3640N – Hotpoint Built-In Dishwasher
Dishwasher Dimensions (in inches)
Countertop
90°
25-3/4
24
This wall area
must be free of
pipes or wires
Panel Thickness
MAX.
23-3/8
Door insert
A
C
90°
3/4
24"
Electrical
4
5
4
5
MIN.
Front
of
Panel
wiring is
3" from
cabinet
4
Hot
water
line on
left
Electrical
wiring on
right
34" to 34-3/4"
Underside
of countertop
to floor
Access insert
B
6
6
1-1/2
1/2
24-3/4
Plumbing and electrical
service must enter
inside shaded area
2
1/4
34 MIN.
adj. to 35
19" MIN. from wall
24" From wall
When using GPF325
24" MIN.
1/4" custom dishwasher
door and access panel kit.
21-1/2
When using GPF375
3/4" custom dishwasher
door and access panel kit.
3-1/4
Note: Dishwasher must not be installed more than
10 feet from sink for proper drainage. All plumbing
and electrical work must be in accordance with
local codes. Dishwasher includes drain hose and
leveling legs.
4 (Adjustable)
Panel
Thickness
Kit
A
B
C
GPF325
GPF375
18-7/8"
18-15/16"
23-9/16"
23-5/8"*
3-11/16"
1/4"
3/4"
Electrical Rating
Voltage AC............................................... 120
Hertz........................................................ 60
Total connected load amperage............. 8.6
Calrod® heater watts max................... 500
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
4-1/4" to
3-3/4"**
*
Bottom of panel must be notched 1-1/2" x 1/2" to clear across panel
** Adjustment required to match adjacent cabinet fronts due
to leveling leg adjustment, 4" nominal
For use on adequately wired 120-volt, 15-amp circuit
having 2-wire service with a separate ground wire.
This appliance must be grounded for safe operation.
As an EnErgy STAr®
partner, gE has determined
that this product meets the
EnErgy STAr guidelines
for energy efficiency.
Listed by
Underwriters
Laboratories
Specification Created 4/07
450152
Download from Www.Somanuals.com. All Manuals Search And Download.
|