Honeywell Bluetooth Headset AP 010 BT User Manual

AP-010-BT and AP-100-BT  
Access Point Device with Bluetooth® Wireless Technology  
Installation Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Introduction  
Product Overview............................................................................................. 1  
Base Kit Components and Optional Accessories ............................................. 1  
Components..................................................................................................... 2  
Mounting Specifications.................................................................................... 3  
Cable Removal................................................................................................. 3  
Product Labels ................................................................................................. 4  
Installation  
Cable to Access Point Connection ................................................................... 5  
RS232 Host Connections ................................................................................. 5  
USB Host Connections..................................................................................... 6  
Keyboard Wedge Host Connections ................................................................ 6  
RS485 Host Connections ................................................................................. 6  
Establishing Communication  
Between the Scanner and the Access Point Device......................................... 7  
Access Point Device Operation  
Page/Disconnect Button................................................................................... 8  
Visual Indicators............................................................................................... 8  
Configuration Procedures  
Metro Protocol Compatibility............................................................................. 9  
CodeXML Protocol Compatibility.................................................................... 10  
Access Point Device Configuration in CodeXML Mode.................................. 11  
Optional Configuration Bar Codes.................................................................. 12  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Upgrading the Firmware..................................................................................... 17  
Upgrading FocusBT Firmware via the Access Point Device........................... 18  
Design Specifications ......................................................................................... 19  
Device Pinout ................................................................................................. 20  
Cable Pinout Connections.............................................................................. 21  
Regulatory Compliance  
Limited Warranty ................................................................................................ 25  
Index .................................................................................................................. 26  
Contact Information and Office Locations........................................................... 27  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
INTRODUCTION  
Honeywell’s access point devices with Bluetooth® wireless technology provide  
customers with a flexible and convenient solution for wireless communication  
in a variety of environments, including retail, healthcare, and manufacturing.  
The access point device separates charging functions from communication  
functions, allowing the user to optimize the available radio range.  
Choose from Class II (10 meters) Bluetooth communication or Class I  
(100 meters) to meet the specific needs of the application.  
ACCESS POINT  
INTERFACE SUPPORT  
Interfaces supported include:  
AP-010-BT  
OR  
RS232  
USB  
Keyboard Wedge  
RS485S  
AP-100-BT  
S Applicable for IBM® Host applications.  
Base Kit Components and Optional Accessories  
BASIC KIT  
Part #  
Description  
AP-010-BT  
OR  
Access Point Device (Class 2 radio: 10 m)  
OR  
AP-100-BT  
Access Point Device (Class 1 radio: 100 m)  
Access Point Device with Bluetooth® Wireless Technology  
Installation Guide*  
70-79035  
OPTIONAL ACCESSORIES  
Part #  
Description  
AC to DC Power Transformer- Regulated 5.2VDC @ 1A output.  
46-00525  
90VAC-255VAC United States, Canada, and Japan  
90VAC-255VAC Continental European  
90VAC-255VAC United Kingdom  
90VAC-255VAC Australia  
46-00526  
46-00527  
46-00528  
46-00529  
90VAC-255VAC China  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
OPTIONAL ACCESSORIES  
Part #  
Description  
55-55500-3  
55-55502-N-3  
55-55512-3  
55-55535-N-3  
RS232 Straight PowerLink Cable, Black  
Keyboard Wedge Straight Cable, Black  
RS485S Applications,Straight PowerLink Cable  
USB Type A Straight Cable, Black  
AUX Cable, Black  
55-55567-3  
Applicable for IBM® host applications.  
S
Other items may be ordered for the specific protocol being used. To order additional items,  
contact the dealer, distributor or call Metrologic’s Customer Service Department at  
1-800-ID-METRO or 1-800-436-3876.  
Components  
ITEM NO.  
DESCRIPTION  
LOCATION  
Page/Disconnect Button &  
Blue LED (see page 8)  
1
2
3
4
5
Mounting Holes, Qty. 2  
10-Pin RJ45, Female Socket  
Pinhole for Cable Release  
(see page 5)  
Figure 1. Components  
Address Bar Code  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Mounting Specifications  
1. Drill two, 1.6 mm pilot holes in the mounting surface. The pilot holes should  
be located on a common centerline and be spaced 68.80 mm (2.70") apart.  
2. Secure the access point device to the mounting surface with the  
M2.5 x 1.1 - 10 mm, Phillips wood screws provided with the access point.  
Figure 2. Mounting Specifications  
Cable Removal  
Turn off power to the host system before removing the cable from the access  
point device. If the cable is a PowerLink cable, disconnect the power supply on  
the cable.  
Figure 3. Cable Removal  
1. Locate the small pinhole on the top of the access point device  
(see figure above).  
2. Bend an ordinary paperclip into the shape shown above.  
3. Insert the paperclip into the pinhole on the device. Apply pressure to  
release the connector’s lock.  
4. Pull on the cable’s strain-relief to remove the cable.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Product Labels  
The serial number label located on the bottom of the access point device  
provides important information including the model number, date of manufacture,  
serial number, address bar code, safety and regulatory information. An  
additional copy of the address bar code is location on the top of the device near  
the Honeywell logo. The figure below provides examples of the labels and their  
locations on the access point device.  
Figure 4. Label Location with Examples  
Caution  
To maintain compliance with applicable standards, all circuits connected to the  
scanner must meet the requirements for SELV (Safety Extra Low Voltage)  
according to EN/IEC 60950-1.  
To maintain compliance with standard CSA C22.2 No. 60950-1/UL 60950-1 and  
norm EN/IEC 60950-1, the power source should meet applicable performance  
requirements for a limited power source.  
The AP-010-BT and AP-100-BT are intended for use with Listed UL computer  
and/or Listed PS with LPS/Class 2 output.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Cable to Access Point Connection  
1. Align the tab on the modular connector with the pinhole on the access point  
device (see figure below).  
2. Insert the modular connector into the device’s socket.  
3. Test the cable’s connection to ensure the connector lock has engaged.  
Important: If the cable is not fully latched, the unit can power intermittently.  
4. Refer to pages 5 – 6 for the appropriate host connections applicable to the  
interface type.  
Figure 5. Cable Installation  
RS232 Host Connections  
1. Turn off power to the host system.  
2. Connect the female, 9-Pin D-type  
connector to a dedicated RS232  
communication port on the host  
system.  
3. Plug the external power supply into  
the power jack on the PowerLink  
cable.  
Figure 6. RS232 Host Connections  
Check the AC input requirements of the power supply verify the  
voltage matches the AC outlet. The outlet must be located near the  
equipment.  
See caution information on page 4.  
4. Connect AC power to the transformer.  
5. Turn on power to the host system.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
USB Host Connections  
1. Turn off power to the host system.  
2. Plug the USB connector into the to  
a dedicated USB serial port.  
3. Turn on power to the host system.  
Figure 7. USB Host Connections  
Keyboard Wedge Host Connections  
1. Turn off power to the host system.  
2. Disconnect the keyboard from the  
host system.  
3. Connect the “Y” ends of the  
communication cable to the  
keyboard and the keyboard port on  
the host system. If necessary, use  
the male/female adapter cable  
supplied with the device for proper  
connections.  
Figure 8. KBW Host Connections  
4. Turn on power to the host system.  
RS485S Host Connections  
1. Turn off power to the host system.  
2. Connect the SDL connector into  
a dedicated Port 9 on the host  
system.  
3. Plug the external power supply  
into the power jack on the  
PowerLink cable  
Figure 9. RS485 Host Connections  
Check the AC input requirements of the power supply verify the voltage  
matches the AC outlet. The outlet must be located near the equipment.  
See caution information on page 4.  
4. Connect AC power to the transformer.  
5. Turn on power to the host system.  
S Applicable for IBM® Host applications.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
ESTABLISHING COMMUNICATION  
Between the Scanner and the Access Point Device  
To establish communication between the scanner and access point device:  
1. Connect the access point device to the host system (see pages 5 - 6).  
2. Scan the address bar code on the access point device to establish a  
communication connection between the scanner and the access point  
device.  
Figure 10. Address Bar Code  
3.  
If successful, the scanner will respond with two beeps and the LED's on  
both the scanner and access point device will stop flashing.  
Important Note:  
The communication link between the scanner and the  
access point device is determined by the last address  
code scanned.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESS POINT DEVICE OPERATION  
Page/Disconnect Button  
The access point has a button located on  
the top of the device that can be used to  
either page the scanner or disconnect the  
communication link between the scanner  
and the access point.  
Figure 11.  
The page and disconnect button features are not supported in  
CodeXML protocol mode. The scanner must be configured for the  
Metro protocol mode for feature functionality. Refer to page 9 for  
more information on Metro Protocol Compatibility.  
To page the scanner:  
1. Press the page button on the top of the access point device.  
2. The scanner will start to beep and alternately flash the LEDs.  
3. Locate the scanner.  
4. Pull the scanner’s trigger or press the page button on the top of the access  
point to stop paging.  
To disconnect communication:  
1. Press and hold down the button on the access point device for  
more than 3 seconds. The blue LED on the access point device will start to  
flash indicating there is no communication link established.  
To re-establish communication:  
1. Scan the address bar code on access point device with the scanner.  
Visual Indicators  
The page/disconnect button is also the blue LED status indicator (see figure  
above). The activity of the blue LED reflects the connection, operation and  
communication status of the access point device.  
If the blue LED is:  
not illuminated, the access point device is not receiving power.  
flashing on and off, the access point device is receiving power but does not  
have a communication link to a scanner.  
always illuminated there is a communication link established between the  
access point device and a scanner.  
After a successful scan, the Blue LED will temporarily turn off while  
data is being sent to the host system. The LED will turn back on  
when data transmission is complete.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONFIGURATION PROCEDURES  
The following information is for replacement applications or situations requiring  
scanner reconfiguration. Some of the configuration procedures require the user  
to scan the recall defaults bar code. If the recall defaults code is scanned, the  
scanner’s factory pre-configurations and custom configurations will be lost.  
The scanner will need to be reconfigured in order to work with the access point  
device.  
Metro Protocol Compatibility  
By default, the Metro protocol is enabled before the access point device and  
scanner leave the factory. The protocol supports page/disconnect functions,  
scanner firmware upgrades through the access point device, and all features  
supported by the Code XML protocol.  
When a scanner is using the Metro protocol, configuration data is stored in the  
access point device. The stored data is automatically sent to the scanner when a  
communication link is established between the scanner and the access point  
device. Scanned data and custom configuration settings will be lost if a  
communication link is not established between the scanner and the access  
point.  
Scanner configuration changes can be done either by scanning configuration bar  
codes in the MetroSelect Single-Line Configuration Guide (MLPN 00-02544x), or  
with the MetroSet2® program, version 3.2.0.16 or higher.  
Metro Protocol Firmware Requirements  
Scanner Model and REV  
FocusBT (A)  
Firmware Version  
40268 or higher  
FocusBT (B)  
Focus BT (F)  
40268 or higher  
all versions are compatible  
To configure a scanner to use the Metro protocol:  
1. Scan the Recall Defaults bar code then the Enable Metro Protocol bar  
code.  
Enable Metro Protocol  
Recall Defaults  
³
1
2
5
6
1
4
³
9
9
9
9
9
8
2. Scan the address bar code located on the top of the access point device  
(see Figure 11, on page 8) to establish a communication link between the  
scanner and access point.  
3. The scanner will beep and the access point’s blue LED will flash once.  
4. The scanner will receive the configuration from the access point device  
automatically.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONFIGURATION PROCEDURES  
CodeXML Protocol Compatibility  
The CodeXML protocol does not support page/disconnect button functions, or  
scanner firmware upgrades through the access point device and Metroset2.  
When a scanner is using the CodeXML protocol, configuration data is stored in  
the scanner. The stored data is not transmitted to the access point device.  
Special configuration steps are required for the customization of system formats  
and protocols. Instructions on how to configure a scanner in the CodeXML  
protocol mode via the access point device are outlined on page 11.  
CodeXML Firmware Requirements  
Scanner Model  
Firmware Version  
15701 or higher  
Focus BT  
To configure a scanner to use the CodeXML protocol:  
1. Scan the Disable Metrologic Protocol bar code.  
Disable Metro Protocol  
³
1
2
5
6
0
4
2. Scan the Recall Defaults bar code.  
Recall Defaults  
³
9
9
9
9
9
8
3. Scan the Enable CodeXML Protocol bar code.  
Enable CodeXML Protocol  
³
1
2
5
6
1
7
4. Scan the address bar code located on the top of the access point device  
(see Figure 11, on page 8) to establish a communication link between the  
scanner and access point.  
5. The scanner will beep to indicate a connection has been established.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONFIGURATION PROCEDURES  
Access Point Device Configuration in CodeXML Mode  
When a scanner is using the CodeXML protocol all configuration data is stored in  
the scanner. Since the data is not transmitted to the access point device, the  
following process is required to configure the device for custom system formats  
or protocol requirements.  
To configure the access point device:  
1. Verify a communication link is established between the scanner and  
access point.  
2. Scan the Disable CodeXML Protocol bar code.  
Disable CodeXML Protocol  
³
1
2
5
6
0
7
3. Scan the Enable Metro Protocol bar code.  
Enable Metro Protocol  
³
1
2
5
6
1
4
4. Scan all configuration bar codes required for the custom configuration (i.e.  
keyboard type, country keyboard type, suffix or prefix settings).  
Country keyboard bar codes are located on page 14. Additional  
configuration bar codes can be found in the MetroSelect Single-  
Line Configuration Guide (PN 00-02544x) and the Area Imaging  
Supplemental Configuration Guide (PN 00-02281x).  
5. Scan the Disable Metro Protocol bar code.  
Disable Metro Protocol  
³
1
2
5
6
0
4
6. Scan the Enable CodeXML Protocol bar code.  
Enable CodeXML Protocol  
³
1
2
5
6
1
7
MetroSet2 (version 3.2.0.16 or higher) can also be used for access point  
configuration if the device is connected to an RS232 com port or a USB  
serial port.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONFIGURATION PROCEDURES  
Optional Configuration Bar Codes  
The following bar codes are for reference only.  
Suffix Characters  
Disable Carriage Return Suffix  
Enable Carriage Return Suffix  
³
1
1
6
6
0
3
³
1
1
6
6
1
3
The scanner transmits a  
carriage return after each  
bar code.  
Disable Line Feed Suffix  
Enable Line Feed Suffix  
³
1
1
6
6
0
2
³
1
1
6
6
1
2
The scanner transmits a line  
feed after each bar code.  
Disabled when keyboard  
wedge defaults are loaded.  
Disable CodeXML New Line Suffix  
Enable CodeXML New Line  
Suffix  
³
1
2
5
6
0
6
³
1
2
5
6
1
6
Disable Protocol  
Disable CodeXML Protocol  
³
1
2
5
6
0
7
Disable Metro Protocol  
³
1
2
5
6
0
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONFIGURATION PROCEDURES  
The following bar codes require an established communication link between the  
access point device and a scanner using the Metro Protocol. Default settings are  
marked with an asterisk ( * ).  
Send Bluetooth® Software Version  
Send Address  
³
9
9
8
0
4
4
³
9
9
8
0
4
5
Communications  
Load RS232 Defaults  
Load Keyboard Wedge Defaults  
³
9
9
9
9
9
2
³
9
9
9
9
9
4
Load USB IBM OEM Defaults  
Load RS485 Defaults  
³
9
9
9
9
7
0
³
9
9
9
9
5
2
LED  
* Enable LED  
Disable LED  
³
1
1
8
3
1
0
³
1
1
8
3
0
0
* Enable LED Flash  
when Disconnected  
Disable LED Flash  
when Disconnected  
³
1
2
3
7
1
2
³
1
2
3
7
0
2
* Bright LED  
Dim LED  
³
1
2
3
9
0
6
³
1
2
3
9
1
6
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONFIGURATION PROCEDURES  
Country/Scan Code Table Selects  
* Enable USA Keyboard  
Enable Swiss Keyboard  
³
4
1
6
2
6
0
³
4
1
6
2
8
0
Enable Spanish Keyboard  
Enable Italian Keyboard  
³
4
1
6
2
5
0
³
4
1
6
2
4
0
Enable German Keyboard  
Enable French Keyboard  
³
4
1
6
2
3
0
³
4
1
6
2
2
0
Enable UK Keyboard  
Enable Belgium Keyboard  
³
4
1
6
2
1
0
³
4
1
6
2
0
0
Enable Japanese Keyboard  
Enable IBM 4700 Financial  
Keyboard  
³
4
1
6
2
1
0
0
³
4
1
6
2
7
0
Enable Sweden/Finland Keyboard  
Enable Russian Keyboard  
³
4
1
6
2
9
0
³
4
1
6
2
1
3
0
Enable Turkish Keyboard  
Enable Slovenian Keyboard  
³
4
1
6
2
1
2
0
³
4
1
6
2
1
1
0
Download from Www.Somanuals.com. All Manuals Search And Download.  
UPLOADING AND DOWNLOADING SETTINGS  
Uploading Settings via MetroSet2  
The uploadfeature in MetroSet2 allows the user to retrieve the current software  
number and configuration settings of an access point device connected to a  
personal computer.  
To upload settings via MetroSet2:  
1. Verify the access point device is  
connected to the host system and a  
communication link has been  
established with a scanner.  
2. Start the MetroSet2 software.  
3. Click on the plus sign (+) next to POS  
Scanners to expand the supported  
scanner list.  
Figure 12. Scanner Communications  
4. Choose the Focus BT with Access  
Pointfrom the list.  
5. Click on the Upload button.  
6. A communications window will open  
displaying the progress of the upload.  
A message will appear in the window  
when the upgrade is complete.  
7. Click on the Tools menu at the top of the  
screen.  
8. Select View Current Settings from the  
drop down list.  
9. The Scanner Settings window will open  
listing the custom settings uploaded  
from the access point device. Default  
settings will not be listed (see example  
in Figure 13).  
Figure 13. Scanner Settings  
All the settings shown in Figure 13 are for illustrative purposes only  
and will differ depending upon the configuration.  
† Minimum system requirements: A personal computer with Microsoft®  
Windows® 95 or greater with an available RS232 serial or USB port and  
MetroSet2 (minimum software version 3.2.016).  
‡ Scanner model is application dependent.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UPLOADING AND DOWNLOADING SETTINGS  
Downloading Settings via MetroSet2  
The downloadfeature in MetroSet2 allows the user to download custom  
configuration settings selected in MetroSet2 to the access point and the linked  
scanner.  
To download settings via MetroSet2:  
1. Verify the access point device is  
connected to the host system and  
a communication link has been  
established with a scanner.  
2. Start the MetroSet2software.  
3. Click on the plus sign (+) next to  
POS Scanners to expand the  
supported scanner list.  
4. Choose Focus BT with  
Access Pointfrom the list.  
5. Select an interface (i.e. RS232,  
Figure 14. Global Defaults Page  
Keyboard Wedge, USB) then  
click OK.  
6. Select and modify the configuration  
options in the Scanner Functions Menu.  
7. Choose Save As from the File menu to  
save the configuration.  
8. Click on the Down button.  
9. A communications window will open  
displaying the progress of the download.  
The unit will beep and a message will  
appear in the window when the  
download is complete.  
† Minimum system requirements: A personal computer with Microsoft®  
Windows® 95 or greater with an available RS232 serial or USB port and  
MetroSet2 (minimum software version 3.2.016).  
‡ Scanner model is application dependent.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UPGRADING THE FIRMWARE  
Upgrading the Firmware in the Access Point Device  
The access point device is part of Metrologic's product series with flash  
upgradeable firmware. The upgrade process requires, a new firmware file  
supplied to the customer by a customer service representative and Metrologic's  
‹‹  
MetroSet2 software . A personal computer running Windows 95 or greater with  
an available RS232 serial or USB port is required to complete the upgrade.  
Do not use the standard cable supplied with Keyboard Wedge or  
RS485 Access Point interface kits for firmware upgrades. If using USB  
or RS232 for the upgrade process, the standard USB or RS232 cable  
provided with the scanner can be used.  
To upgrade the firmware in the access point device:  
1. Plug the unit into a serial communication port on the host system.  
2. Start the MetroSet2 software.  
3. Click on the plus sign (+) next to POS Scanners to expand the supported  
scanner list.  
4. Choose the Focus BT with Access Point from the list.  
5. Click on the Configure Focus BT with Access Point Scanner button.  
6. Select the interface from the Prompt Window.  
7. Choose AP NEC or AP Silabs from the options list located on the left side  
of the screen to upgrade firmware in Access Point device.  
8. Click on the Select File button in the window.  
9. Locate and open the flash upgrade file supplied by Metrologic.  
10. Select the COM port that the scanner is connected to on the host system.  
11. Verify the settings listed in the Flash Utility window.  
12. Click on the Flash Scanner button to begin the flash upgrade.  
13. A message will appear on the screen when the upgrade is complete.  
Metrologic's customer service department can be reached at  
1-800-ID-METRO or 1-800-436-3876.  
‹‹  
MetroSet2 is available for download, at no additional cost, from  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
UPGRADING THE FIRMWARE  
Upgrading FocusBT Firmware via the Access Point Device  
With MetroSet2, scanner firmware upgrades can be accomplished through the  
communication link between the access point device and scanner. This feature  
is not supported in scanners using the CodeXML protocol. The scanner  
must be in Metro protocol mode.  
Do not use the standard cable supplied with Keyboard Wedge, USB or  
RS485 Access Point interface kits for firmware upgrades. If using  
RS232 for the upgrade process, the standard RS232 cable provided  
with the scanner can be used.  
To upgrade the firmware in FocusBT via the access point device:  
1. Plug the unit into a serial communication port on the host system.  
2. Start the MetroSet2 software.  
3. Click on the plus sign (+) next to POS Scanners to expand the supported  
scanner list.  
4. Choose the Focus BT with Access Point from the list.  
5. Click on the Configure Focus BT with Access Point Scanner button.  
6. Select the interface from the Prompt Window.  
7. Choose FocusBT from the options list located on the left side of the screen  
to upgrade FocusBT firmware.  
8. Click on the Select File button in the window.  
9. Locate and open the flash upgrade file supplied by Metrologic.  
10. Select the COM port that the scanner is connected to on the host system.  
11. Verify the settings listed in the Flash Utility window.  
12. Click on the Flash Scanner button to begin the flash upgrade.  
13. A message will appear on the screen when the upgrade is complete.  
Metrologic's customer service department can be reached at  
1-800-ID-METRO or 1-800-436-3876.  
‹‹  
MetroSet2 is available for download, at no additional cost, from  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESIGN SPECIFICATIONS  
Access Point Device  
OPERATIONAL  
RS232, Keyboard Wedge, RS485S, USB  
System Interfaces:  
S Applicable for IBM® Host applications.  
Indicator: Blue LED  
MECHANICAL  
Length: 111 mm (4.4")  
Width: 77 mm (3.0")  
Height: 16 mm (0.6")  
Weight: 75 g ( 2.7 oz )  
ELECTRICAL  
AP-010-BT  
AP-100-BT  
Input Voltage: 5.0VDC ± 0.25V  
Power: 0.8 W (Maximum)  
5.0VDC ± 0.25V  
0.85 W (Maximum)  
170 mA (Maximum)  
Class II; 5.2VDC@ 1A  
Current: 160 mA (Maximum)  
DC Transformers: Class II; 5.2VDC@ 1A  
Wireless  
Bluetooth V2.0  
Technology:  
Bluetooth V2.0  
100 m (328 ft)  
Radio Range: 10 m (33 ft)  
For regulatory compliance information, see pages 23 –24.  
ENVIRONMENTAL  
Operating  
Storage  
0°C to 40°C (32°F to 104°F)  
-20°C to 60°C (-4°F to 140°F)  
Temperature:  
Humidity: 5% to 95% relative humidity, non-condensing  
Shock: Designed to withstand 1.5 m (5 ft.) drops  
Environmental  
Sealing:  
IP54  
Specifications are subject to change without notice.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEVICE AND CABLE TERMINATIONS  
The access point device terminates to a single 10-Pin RJ45, Female Socket.  
The following charts provide the pinout information for each of the available  
interfaces.  
RS232  
10-Pin, RJ45  
Pin  
1
Function  
Ground  
2
3
4
CTS RS232 Input  
Receive RS232 Input  
Reserved  
5
Reserved  
6
7
RTS RS232 Output  
Reserved  
8
9
Transmit RS232 Output  
Adapt +5VDC  
Figure 15  
10  
Shield Ground  
USB  
Keyboard Wedge  
10-Pin, RJ45  
10-Pin, RJ45  
Function  
Ground  
Pin  
1
Function  
Pin  
1
Ground  
2
3
4
5
Tied to Pin4 in Cable  
Reserved  
Tied to Pin2 in Cable  
Reserved  
2
3
4
5
Tied to Pin3 in Cable  
Tied to Pin2 in Cable  
PC Data  
PC Clock  
6
USB D+  
6
KB Clock  
7
8
Tied to Pin9 in Cable  
USB D-  
7
8
Reserved  
KB Data  
9
PC +5VDC  
9
PC +5VDC  
10  
Shield Ground  
10  
Shield Ground  
RS485S  
10-Pin, RJ45  
Function  
Ground  
Pin  
1
S Applicable for IBM® Host applications.  
2
3
Tied to Pin6 in Cable  
Reserved  
4
IBM A+  
5
IBM B-  
6
7
Tied to Pin2 in Cable  
Reserved  
8
Reserved  
9
10  
Adapt +5VDC  
Shield Ground  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEVICE AND CABLE TERMINATIONS  
Cable Pinout Connections  
RS232 PowerLink Cable  
MLPN 55-55500  
Pin  
1
Function  
Shield Ground  
2
CTS  
3
RXD  
4
Reserved  
Reserved  
RTS  
5
6
9-Pin D-Type Connector  
7
Reserved  
TXD  
8
9
+5VDC  
USB Communication Cable  
MLPN 55-55535  
Pin Function  
1
2
3
4
PC +5V/V_USB  
D-  
D+  
Non-Locking, Type A  
Ground  
Shield Shield  
RS485S Cable  
MLPN 55-55512  
Pin  
1
Function  
Ground  
2
IBM A+  
IBM B-  
3
SDL A Key  
4
Reserved  
S Applicable for IBM® Host applications.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEVICE AND CABLE TERMINATIONS  
Cable Pinout Connections  
Keyboard Wedge Cable  
MLPN 55-55502  
Pin  
1
Function  
Keyboard Clock  
2
Keyboard Data  
No Connect  
3
4
Power Ground  
+5 Volts DC  
5-Pin DIN, Female  
5
Pin  
1
Function  
PC Data  
2
No Connect  
Power Ground  
3
4
5
6
+5 Volts DC  
PC Clock  
No Connect  
6-Pin DIN, Male  
Metrologic will supply an adapter cable with a 5-pin DIN male connector on one  
end and a 6-pin mini DIN female connector on the other. According to the  
termination required, connect the appropriate end of the adapter cable to the  
PowerLink cable, leaving the necessary termination exposed for connecting to  
the keyboard and the keyboard port on the PC.  
Keyboard Wedge Adapter Cable  
Pin  
1
Function  
PC Clock  
PC Data  
2
3
No Connect  
Power Ground  
+5VDC  
4
5-Pin DIN, Male  
5
Pin  
1
Function  
Keyboard Data  
No Connect  
Power Ground  
+5VDC  
2
3
4
6-pin Mini DIN, Female  
5
Keyboard Clock  
No Connect  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
REGULATORY COMPLIANCE  
EMC  
Emissions  
FCC Part 15, ICES-003, CISPR 22, EN 55022, EN300 328 V1.6.1, EN310 489-17 V1.2.1  
Immunity  
CISPR 24, EN 55024  
Note: Immunity performance is not guaranteed for scanner cables greater than 3 meters in length  
when fully extended.  
Changes or modifications not expressly approved by the party responsible for compliance could void  
the user’s authority to operate the equipment.  
Class A Devices  
The following is applicable when the cable is greater in length than 3 meters (9.8 feet) when  
fully extended:  
Les instructions ci-dessous s’appliquent aux cables de dépassant 3 métres (9.8 pieds) de  
long en extension maximale:  
Folgendes trifft zu, wenn das kabel länger als 3 Meter ist:  
This equipment has been tested and found to comply with limits for a Class A digital device,  
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference when the equipment is operated in a commercial environment. This  
equipment generates, uses and can radiate radio frequency energy and, if not installed and used  
in accordance with the instruction manual, may cause harmful interference to radio  
communications. Operation of this equipment in a residential area is likely to cause harmful  
interference, in which case the user will be required to correct the interference at their own  
expense. Any unauthorized changes or modifications to this equipment could void the user’s  
authority to operate this device.  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) This device may not cause harmful interference, and (2) this device must accept  
any interference received, including interference that may cause undesired operation.  
Notice  
This Class A digital apparatus complies with Canadian ICES-003.  
Remarque  
Cet appareil numérique de classe A est conforme à la norme canadienne NMB-003.  
European Standard  
Warning  
This is a class A product. In a domestic environment this product may cause radio interference  
in which case the user may be required to take adequate measures.  
Funkstöreigenschaften nach EN55022:1998  
Warnung!  
Dies ist eine Einrichtung der Klasse A. Diese Einrichtung kann im Wohnbereich Funkstörungen  
verursachen. In diesem Fall kann vom Betreiber verlangt werden, angemessene Massnahmen  
durchzuführen.  
Standard Europeo  
Attenzione  
Questo e’ un prodotto di classe A. Se usato in vicinanza di residenze private potrebbe causare  
interferenze radio che potrebbero richiedere all’utilizzatore opportune misure.  
Attention  
Ce produit est de classe “A”. Dans un environnement domestique, ce produit peut être la cause  
d’interférences radio. Dans ce cas l’utiliseteur peut être amené à predre les mesures  
adéquates.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REGULATORY COMPLIANCE  
Changes or modifications not expressly approved by the party responsible for compliance could void the  
user’s authority to operate the equipment.  
Class B Devices  
The following is applicable when the cable is less than 3 meters  
(9.8 feet) in length when fully extended:  
Les instructions ci-dessous s’appliquent aux cables de ne dépassant pas 3 métres (9.8  
pieds) de long en extension maximale:  
Folgendes trifft zu, wenn das kabel kürzer als 3 Meter ist:  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) This device may not cause harmful interference, and (2) this device must accept  
any interference received, including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected  
Consult the dealer or an experienced radio/TV technician for help  
Notice  
This Class B digital apparatus complies with Canadian ICES-003.  
Remarque  
Cet appareil numérique de classe B est conforme à la norme canadienne NMB-003.  
Exposure to Radio Frequency Energy  
The radiated output power of this intentional wireless radio is far below the FCC radio frequency  
exposure limits. The internal wireless radio operates within guidelines found in radio frequency  
safety standards and recommendations, which reflect the consensus of the scientific community.  
The level of energy emitted is far less than the electromagnetic energy emitted by wireless devices  
such as mobile phones. However, the use of wireless radios may be restricted in some situations  
or environments, such as aboard airplanes. If you are unsure of restrictions, you are encouraged  
to ask for authorization before turning on the wireless radio.  
For more information from the US FCC about exposure to RF energy, see:  
For information about the scientific research related to RF energy exposure, see the EMF  
Research Database maintained by the World Health Organization at:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
The AP-010-BT and AP-100-BT access point devices are manufactured by Metrologic at its Suzhou,  
China facility. The AP-010-BT and AP-100-BT access point devices have a two (2) year limited warranty  
from the date of manufacture. Metrologic warrants and represents that allAP-010-BT and AP-100-BT  
access point devices are free of all defects in material, workmanship and design, and have been  
produced and labeled in compliance with all applicable U.S. Federal, state and local laws, regulations  
and ordinances pertaining to their production and labeling.  
This warranty is limited to repair, replacement of product or refund of product price at the sole discretion  
of Metrologic. Faulty equipment must be returned to one of the following Metrologic repair facilities:  
Blackwood, New Jersey, USA; Madrid, Spain; or Suzhou, China. To do this, contact the appropriate  
Metrologic Customer Service/Repair Department to obtain a Returned Material Authorization (RMA)  
number.  
In the event that it is determined the equipment failure is covered under this warranty, Metrologic  
shall, at its sole option, repair the Product or replace the Product with a functionally equivalent unit  
and return such repaired or replaced Product without charge for service or return freight, whether  
distributor, dealer/reseller, or retail consumer, or refund an amount equal to the original purchase  
price.  
This limited warranty does not extend to any Product, which in the sole judgment of Metrologic,  
has been subjected to abuse, misuse, neglect, improper installation, or accident, nor any damage  
due to use or misuse produced from integration of the Product into any mechanical, electrical or  
computer system. The warranty is void if: (i) the case of the Product is opened by anyone other  
than Metrologic's repair department or authorized repair centers; or (ii) any software is installed on  
the Product other than a software program approved by Metrologic.  
THIS LIMITED WARRANTY, EXCEPT AS TO TITLE, IS IN LIEU OF ALL OTHER WARRANTIES  
OR GUARANTEES, EITHER EXPRESS OR IMPLIED, AND SPECIFICALLY EXCLUDES,  
WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE UNDER THE UNIFORM COMMERCIAL CODE, OR ARISING OUT OF  
CUSTOM OR CONDUCT. THE RIGHTS AND REMEDIES PROVIDED HEREIN ARE  
EXCLUSIVE AND IN LIEU OF ANY OTHER RIGHTS OR REMEDIES. IN NO EVENT SHALL  
METROLOGIC BE LIABLE FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGES,  
INCIDENTAL DAMAGES, DAMAGES TO PERSON OR PROPERTY, OR EFFECT ON  
BUSINESS OR PROPERTY, OR OTHER DAMAGES OR EXPENSES DUE DIRECTLY OR  
INDIRECTLY TO THE PRODUCT, EXCEPT AS STATED IN THIS WARRANTY. IN NO EVENT  
SHALL ANY LIABILITY OF METROLOGIC EXCEED THE ACTUAL AMOUNT PAID TO  
METROLOGIC FOR THE PRODUCT. METROLOGIC RESERVES THE RIGHT TO MAKE ANY  
CHANGES TO THE PRODUCT DESCRIBED HEREIN.  
NORTH AMERICA  
Metrologic Instruments, Inc.  
METROLOGIC EUROPEAN REPAIR CENTER  
(MERC)  
90 Coles Rd.  
Metrologic Eria Ibérica, SL  
C/Alfonso Gomez, 38-40, 1D  
28037 Madrid  
Tel: +34 913 751 249  
Fax: +34 913 270 437  
Blackwood, NJ 08012-4683  
Customer Service Department  
Tel: 1-800-ID-METRO  
Fax: 856-228-6673  
MTLG AUTO ID INSTRUMENTS (SHANGHAI) CO., LTD  
Suzhou Sales Office  
BLK A, Room# 03/03-04  
No.5 Xinghan Street, Xinsu Industrial Square  
China-Singapore Suahou Industrial Park, Suzhou, PRC  
Tel: 86-512-67622550  
Fax: 86-512-67622560  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX  
Interface ..................................19  
Keyboard Wedge.........1, 2, 6, 22  
RS232 .........................1, 2, 5, 21  
RS485 .........................1, 2, 6, 21  
USB.................................1, 2, 21  
A
AC ..................................see power  
Accessories.................................. 2  
Address Bar Code........................ 2  
B
K
Blue............................see indicator  
Button................................... 17, 18  
Keyboard Wedge .......see Interface  
L
C
Labels ...........................................4  
LED............................ see indicator  
Cable  
AUX .......................................... 2  
Keyboard Wedge.................. 2, 6  
PowerLink............................. 2, 5  
RS232....................................... 5  
RS485................................... 2, 6  
USB ...................................... 2, 6  
Caution  
compliance................................ 4  
SELV......................................... 4  
CE ................................................ 4  
Compliance ............................ 4, 23  
Configuration........................ 17, 18  
Customer Service................... 2, 25  
M
Manual ..........................................2  
Mounting hole ...............................2  
P
Page/Disconnect Button ...............2  
Power........................................2, 5  
R
RMA............................................25  
RS232........................see Interface  
RS485........................see Interface  
D
DC..................................see power  
T
E
terminations ..........................21–22  
EMC ........................................... 23  
Emissions................................... 23  
transformer.....................see power  
U
F
UL .................................................4  
Upgrade ................................17, 18  
USB ...........................see Interface  
Firmware .............................. 17, 18  
I
W
Immunity..................................... 23  
Indicator...................................... 19  
Visual........................................ 2  
Warranty .....................................25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
70-79035A  
October 2008  
Printed in China  
© 2008 Honeywell International Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Inc Paint Sprayer 222625 User Manual
Grizzly Drill G0484 User Manual
Grizzly Power Hammer H8210 User Manual
Groupe SEB USA T FAL Iron FV5210 User Manual
Harbor Freight Tools Automobile Parts 96549 User Manual
Harbor Freight Tools Cordless Sander 93742 User Manual
Hasbro Games 59757 User Manual
Honeywell Security Camera HZC 855NX User Manual
Huffy Fitness Equipment N5 101 User Manual
Hypertec Carrying Case TAN3706HY User Manual