Healthrider Treadmill HRTL05910 User Manual

®
Model No. HRTL05910  
Serial No.  
Write the serial number in the space  
above for future reference.  
USER'S MANUAL  
Serial Number Decal  
QUESTIONS?  
As a manufacturer, we are  
committed to providing com-  
plete customer satisfaction. If  
you have questions, or if there  
are missing parts, we will guar-  
antee complete satisfaction  
through direct assistance from  
our factory.  
TO AVOID UNNECESSARY  
DELAYS, PLEASE CALL DIRECT  
TO OUR TOLL-FREE CUSTOMER  
HOT LINE. The trained techni-  
cians on our customer hot line  
will provide immediate assis-  
tance, free of charge.  
CUSTOMER HOT LINE:  
1-800-999-3756  
Mon.–Fri., 6 a.m.6 p.m. MST  
CAUTION  
Visit our website at  
Read all precautions and instruc-  
tions in this manual before using  
this equipment. Save this man-  
ual for future reference.  
new products, prizes,  
fitness tips, and much more!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT PRECAUTIONS  
WARNING:  
To reduce the risk of burns, fire, electric shock, or injury to persons, read the  
following important precautions and information before operating the treadmill.  
1. It is the responsibility of the owner to ensure  
that all users of this treadmill are adequately  
informed of all warnings and precautions.  
pation of 450 joules. The surge suppressor  
must be electrically rated for 120 volts AC and  
15 amps. To purchase a surge suppressor,  
see your local HealthRider dealer or call 1-800-  
999-3756 and order part number 146148.  
2. Use the treadmill only as described in this  
manual.  
12. Keep the power cord and the surge suppres-  
sor away from heated surfaces.  
3. Place the treadmill on a level surface, with  
eight feet of clearance behind it. Do not place  
the treadmill on any surface that blocks air  
openings. To protect the floor or carpet from  
damage, place a mat under the treadmill.  
13. Never move the walking belt while the power  
is turned off. Do not operate the treadmill if  
the power cord or plug is damaged, or if the  
treadmill is not working properly. (See  
BEFORE YOU BEGIN on page 5 if the tread-  
mill is not working properly.)  
4. Keep the treadmill indoors, away from mois-  
ture and dust. Do not put the treadmill in a  
garage or covered patio, or near water.  
14. Never start the treadmill while you are stand-  
ing on the walking belt. Always hold the  
handrails while using the treadmill.  
5. Do not operate the treadmill where aerosol  
products are used or where oxygen is being  
administered.  
15. The treadmill is capable of high speeds.  
Adjust the speed in small increments to avoid  
sudden jumps in speed.  
6. Keep children under the age of 12 and pets  
away from the treadmill at all times.  
7. The treadmill should not be used by persons  
weighing more than 250 pounds.  
16. Using hand weights and not holding the  
handrails may compromise your ability to  
maintain your balance. Exercises using hand  
weights should be attempted only by experi-  
enced users.  
8. Never allow more than one person on the  
treadmill at a time.  
9. Wear appropriate exercise clothing when  
using the treadmill. Do not wear loose cloth-  
ing that could become caught in the treadmill.  
Athletic support clothes are recommended  
for both men and women. Always wear ath-  
letic shoes. Never use the treadmill with bare  
feet, wearing only stockings, or in sandals.  
17. The pulse sensor is not a medical device.  
Various factors, including the user's move-  
ment, may affect the accuracy of heart rate  
readings. The pulse sensor is intended only  
as an exercise aid in determining heart rate  
trends in general.  
18. Never leave the treadmill unattended while it  
is running. Always remove the key, unplug  
the power cord and move the on/off switch to  
the off position when the treadmill is not in  
use. (See the drawing on page 5 for the loca-  
tion of the on/off switch.)  
10. When connecting the power cord (see page  
7), plug the power cord into a surge suppres-  
sor (not included) and plug the surge sup-  
pressor into a grounded circuit capable of  
carrying 15 or more amps. No other appliance  
should be on the same circuit.  
19. Do not attempt to raise, lower, or move the  
treadmill until it is properly assembled. (See  
ASSEMBLY on page 6, and HOW TO FOLD  
AND MOVE THE TREADMILL on page 21.)  
You must be able to safely lift 45 pounds (20  
kg) to raise, lower, or move the treadmill.  
11. Use only a single-outlet surge suppressor that  
is UL 1449 listed as a transient voltage surge  
suppressor (TVSS). The surge suppressor  
must have a UL suppressed voltage rating of  
400 volts or less and a minimum surge dissi-  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
20. When folding or moving the treadmill, make  
sure that the storage latch is fully closed.  
24. Inspect and tighten all parts of the treadmill  
regularly.  
21. When using iFIT.com CD’s and videos, an  
electronic “chirping” sound will alert you  
when the speed and/or incline of the treadmill  
is about to change. Always listen for the  
“chirp” and be prepared for speed and/or in-  
cline changes. In some instances, the speed  
and/or incline may change before the per-  
sonal trainer describes the change.  
25. Never insert or drop any object into any  
opening.  
26.  
DANGER:  
Always unplug the power  
cord immediately after use, before cleaning  
the treadmill, and before performing the  
maintenance and adjustment procedures de-  
scribed in this manual. Never remove the  
motor hood unless instructed to do so by an  
authorized service representative. Servicing  
other than the procedures in this manual  
should be performed by an authorized ser-  
vice representative only.  
22. When using iFIT.com CD’s and videos, you  
can manually override the speed and incline  
settings at any time by pressing the speed  
and incline buttons. However, when the next  
“chirp” is heard, the speed and/or incline will  
change to the next settings of the CD or  
video program.  
27. This treadmill is intended for in-home use  
only. Do not use this treadmill in any com-  
mercial, rental, or institutional setting.  
23. Always remove iFIT.com CD’s and videos  
from your CD player or VCR when you are not  
using them.  
WARNING:  
Before beginning this or any exercise program, consult your physician. This  
is especially important for persons over the age of 35 or persons with pre-existing health problems.  
Read all instructions before using. ICON assumes no responsibility for personal injury or property  
damage sustained by or through the use of this product.  
SAVE THESE INSTRUCTIONS  
The decals shown below have been placed on your treadmill. If a decal is missing, or if it is not legible,  
please call our Customer Service Department toll-free at 1-800-999-3756 to order a free replacement decal.  
Apply the decal in the location shown. Note: The large decal is shown at 38% of actual size.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU BEGIN  
Congratulations for purchasing the Softstrider S300i™  
treadmill by HealthRider®. The S300i offers an impres-  
sive array of features to help you achieve your fitness  
goals in the convenience of your home. From the ad-  
vanced console to the cushioned walking platform, the  
S300i is designed to make each workout more effec-  
tive and enjoyable. And when you’re not exercising,  
the S300i can be folded away, taking less than half the  
floor space of conventional treadmills.  
questions, please call our Customer Service  
Department toll-free at 1-800-999-3756, Monday  
through Friday, 6 a.m. until 6 p.m. Mountain Time (ex-  
cluding holidays). To help us assist you, please note  
the product model number and serial number before  
calling. The model number is HRTL05910. The serial  
number can be found on a decal attached to the tread-  
mill (see the front cover of this manual for the  
location).  
For your benefit, read this manual carefully before  
using the S300i treadmill. If you have additional  
Before reading further, please familiarize yourself with  
the parts that are labeled in the drawing below.  
Hand Weight Holder  
Book Holder  
Console  
Chest Pulse Sensor Holder*  
Water Bottle Holder†  
Handgrip  
Pulse Sensor  
Handrail  
Key/Clip  
Latch Knob  
RIGHT SIDE  
On/Off  
Switch  
Walking Belt  
Circuit  
Breaker  
Foot Rail  
Power  
Cord  
Cushioned  
BACK  
Walking Platform  
Rear Roller  
Adjustment Bolts  
*For information about the optional chest pulse  
sensor, see page 20.  
†Water bottle is not included.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
Assembly requires two people. Place the treadmill in a cleared area and remove all packing materials. Do not  
dispose of the packing materials until the treadmill is assembled. No tools are required.  
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a  
small amount of lubricant may be transferred to the top of the walking belt, the sides of the walking platform, or  
the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt or  
on the sides of the walking platform, wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.  
1. With the help of a second person, carefully raise the  
1
Uprights (103) until the Wheels (99) are resting on the  
floor as shown.  
103  
99  
2. Next, make sure that the Latch Knob Sleeve (68) is fully  
2
inserted into the left Upright (103).  
Remove the Latch Knob (67) from the Latch Pin (72).  
Make sure that the Latch Pin Collar (70) and the Spring  
(69) are on the Latch Pin. (Note: If there are two Latch Pin  
Collars, place one on each side of the Spring.) Insert the  
Latch Pin into the left Upright (103) and tighten the Latch  
Knob onto it.  
103  
69  
70  
67  
72  
68  
3. Make sure that all parts are tightened before you use the treadmill. Place a mat beneath the treadmill  
to protect the floor or carpet. For your benefit, we recommend that you familiarize yourself with the  
TROUBLE-SHOOTING AND MAINTENANCE section on pages 22 and 23.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION AND ADJUSTMENT  
THE PERFORMANT LUBETM WALKING BELT  
This product is for use on a nominal 120-volt circuit,  
and has a grounding plug that looks like the plug illus-  
trated in drawing 1 below. A temporary adapter that  
looks like the adapter illustrated in drawing 2 may be  
used to connect the surge suppressor to a 2-pole  
receptacle as shown in drawing 2 if a properly  
grounded outlet is not available.  
Your treadmill features a walking belt coated with  
PERFORMANT LUBETM, a high-performance lubricant.  
IMPORTANT: Never apply silicone spray or other  
substances to the walking belt or the walking plat-  
form. Such substances will deteriorate the walking  
belt and cause excessive wear.  
1
HOW TO PLUG IN THE POWER CORD  
Grounded Outlet Box  
Surge Suppressor  
Grounding Pin  
DANGER:  
Improper connection  
of the equipment-grounding conductor can  
result in an increased risk of electric shock.  
Check with a qualified electrician or service-  
man if you are in doubt as to whether the  
product is properly grounded. Do not modify  
the plug provided with the product—if it will  
not fit the outlet, have a proper outlet  
Grounding Pin  
Grounded Outlet  
Grounding Plug  
installed by a qualified electrician.  
2
Grounded Outlet Box  
Adapter  
Your treadmill, like any other type of sophisticated  
electronic equipment, can be seriously damaged by  
sudden voltage changes in your home’s power.  
Voltage surges, spikes, and noise interference can  
result from weather conditions or from other appliances  
being turned on or off. To decrease the possibility of  
your treadmill being damaged, always use a surge  
suppressor with your treadmill (see drawing 1 at  
the right).  
Surge Suppressor  
Lug  
Metal Screw  
To purchase a surge suppressor, see your local  
HealthRider dealer or call toll-free 1-800-999-3756  
and order part number 146148. Use only a single-  
outlet surge suppressor that is UL 1449 listed as a  
transient voltage surge suppressor (TVSS). The surge  
suppressor must have a UL suppressed voltage rating  
of 400 volts or less and a minimum surge dissipation of  
450 joules. The surge suppressor must be electrically  
rated for 120 volts AC and 15 amps.  
The temporary adapter should be used only until a  
properly grounded outlet (drawing 1) can be installed  
by a qualified electrician.  
The green-colored rigid ear, lug, or the like extending  
from the adapter must be connected to a permanent  
ground such as a properly grounded outlet box cover.  
Whenever the adapter is used it must be held in place  
by a metal screw. Some 2-pole receptacle outlet box  
covers are not grounded. Contact a qualified elec-  
trician to determine if the outlet box cover is  
grounded before using an adapter.  
This product must be grounded. If it should malfunc-  
tion or break down, grounding provides a path of least  
resistance for electric current to reduce the risk of elec-  
tric shock. This product is equipped with a cord having  
an equipment-grounding conductor and a grounding  
plug. Plug the power cord into a surge suppressor,  
and plug the surge suppressor into an appropriate  
outlet that is properly installed and grounded in  
accordance with all local codes and ordinances.  
Important: The treadmill is not compatible with  
GFCI-equipped outlets.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
J
N
K
L
C
B
M
A
Q
D
E
O
P
Note: If there is a thin  
sheet of clear plastic  
on the face of the  
console, remove it.  
H
I
F
G
FEATURES OF THE CONSOLE  
provides added motivation. Each CD features two pro-  
grams designed by certified personal trainers.  
The treadmill console offers an impressive selection of  
features to help you get the most from your exercise.  
In addition, you can connect the treadmill to your VCR  
and TV and play iFIT.com video programs (one video-  
cassette is included). Video programs offer the same  
benefits as iFIT.com CD programs, but add the excite-  
ment of working out with a class and an instructor—the  
hottest new trend at health clubs.  
When the console is in the manual mode, the speed  
and incline of the treadmill can be changed with a  
touch of a button. As you exercise, the four displays  
will show your workout time, the number of calories  
you have burned, the distance you have walked, the  
incline level of the treadmill, and the speed of the walk-  
ing belt. The console will also show your heart rate  
when the handgrip pulse sensor or the optional chest  
pulse sensor is used.  
With the treadmill connected to your computer, you  
and access basic programs that interactively control  
the speed and incline of your treadmill to help you  
achieve your specific exercise goals. Or, use iFIT.com  
audio and video programs directly from our internet  
The console also offers four preset workout programs.  
Each program automatically controls the speed and in-  
cline of the treadmill as it guides you through an effec-  
tive workout. If you purchase the optional chest pulse  
sensor, the console’s two pulse programs can also be  
used. Each program controls the speed and incline of  
the treadmill to keep your heart rate within a preset  
range during your workouts.  
By adding an optional upgrade module to the treadmill,  
you can use virtually endless features from our internet  
features. To purchase iFIT.com CD’s, iFIT.com  
videocassettes, or an optional upgrade module, call  
toll-free 1-800-690-4990. For information about the  
optional chest pulse sensor, see page 20.  
The console also features advanced iFIT.com technol-  
ogy. IFIT.com technology is like having a personal  
trainer right in your home. Using the included audio  
cable, you can connect the treadmill to your home  
stereo, portable stereo, or computer and play special  
iFIT.com CD programs (one CD is included). IFIT.com  
CD programs automatically control the speed and in-  
cline of the treadmill as a personal trainer guides you  
through every step of your workout. High-energy music  
To use the manual mode of the console, follow the  
steps beginning on page 10. To use a preset program,  
see page 12. To use a pulse program, see page 13.  
To use iFIT.com CD or video programs, see page  
17. To use iFIT.com programs directly from our in-  
ternet site, see page 19.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESCRIPTION OF THE CONSOLE  
K. Calories/Pulse display—This display shows the ap-  
proximate number of calories you have burned.  
When the optional chest pulse sensor is worn, the  
display will also show your heart rate. The display  
will alternate between one number and the other  
every seven seconds. If the handgrip pulse sensor  
is used, the display will show your heart rate contin-  
uously while your hands are on the pulse sensor.  
Refer to the drawing on page 8 to identify the features  
described below.  
A. Water bottle holder—This holder keeps your water  
bottle handy during your workouts (no water bottle  
is included).  
B. Hand weight holder—These compartments hold the  
hand weights.  
L. Distance/Incline display—This display shows the  
distance you have walked and the incline level of  
the treadmill. The display will alternate between one  
number and the other every seven seconds. Note:  
Each time the Incline buttons are pressed, the dis-  
play will change to show the incline setting.  
C. Book holder—This holder allows you to read a book  
or enjoy your favorite magazine while you get in  
shape.  
D. Incline buttons—These buttons control the incline of  
the treadmill. The incline range is 1.5% to 10%.  
M. Speed display—This display shows the speed of  
the walking belt.  
E. Speed buttons and One Touch Speed buttons—  
These buttons control the speed of the walking belt.  
The speed range is 0.5 mph to 10 mph.  
N. Enter button and  
L
and LLbuttons—These buttons  
are used to enter your age when pulse programs  
are used.  
F. Stop buttons—These buttons are used to stop the  
walking belt. Note: Pressing either button will stop  
the walking belt.  
O. Select Workout button—This button is used to select  
the manual mode, the four preset programs, the two  
pulse programs, and the iFIT.com mode. Note: If  
the walking belt is moving when the Select Workout  
button is pressed, the walking belt will slow to a  
stop and the displays will be reset.  
G. Waistband clip—This clip is designed to be worn on  
the waistband of your clothes. If the key is pulled  
from the console, the walking belt will automatically  
stop.  
P. Mode indicators—These indicators show whether  
the manual mode, a preset program, a pulse pro-  
gram, or the iFIT.com mode is selected.  
H. Key—This key turns the console on and off.  
I. Start button—This button is used to start the walking  
belt.  
Q. Program profiles—These profiles show how the tar-  
get heart rate will change during pulse programs  
and how the speed and incline of the treadmill will  
change during preset programs.  
J. Time/Segment Time display—When the manual  
mode or the iFIT.com mode is selected, this display  
will show the elapsed time. When a preset program  
or a pulse program is selected, the display will show  
both the time remaining in the program and the time  
remaining in the current segment of the program.  
The display will alternate between one number and  
the other every seven seconds.  
Note: The console can display exercise feedback  
in either miles or kilometers (see SPEED DISPLAY  
on page 11). For simplicity, all instructions in this  
section refer to miles.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE MANUAL MODE  
WARNING:  
To reduce the risk of  
serious injury, read the following precautions  
before operating the console.  
Insert the key fully into the console.  
1
• Do not stand on the walking belt when turn-  
ing on the power or starting the walking belt.  
See HOW TO TURN ON THE POWER at the left.  
Select the manual mode.  
2
• Always attach the clip (see “G”on page 8) to  
your waistband when using the treadmill.  
When the key is in-  
serted, the manual  
• The treadmill is capable of high speeds.  
Adjust the speed in small increments.  
mode will be selected  
and the manual indica-  
tor will light. If a pro-  
gram has been se-  
lected, press the Select  
Workout button repeatedly to select the manual  
mode.  
• To reduce the risk of electric shock, keep  
liquids away from the console and place only  
a sealed water bottle in the console.  
HOW TO TURN ON THE POWER  
Press the Start button or the Speed  
to start the walking belt.  
L
button  
3
Attach the clip to the waistband of your clothes.  
1
A moment after the button is pressed, the walking  
belt will begin to move at 1.0 mph. Hold the hand-  
rails and begin walking. As you exercise, adjust  
the speed of the walking  
Stand on the foot  
rails of the treadmill.  
Find the clip at-  
tached to the key,  
and slide the clip  
onto the waistband  
of your clothes. Next,  
insert the key fully into the console. Test the clip  
by carefully taking a few steps backward until  
the key is pulled from the console. If the key is  
not pulled from the console, adjust the posi-  
tion of the clip as needed. Then, remove the key  
from the console.  
belt as desired by press-  
Key  
ing the Speed LLand  
L
Clip  
buttons. Each time a  
button is pressed, the  
speed will change by  
0.1 mph. If a button is  
held down, the speed  
will change in increments of 0.5 mph. To change  
the speed setting quickly, press the One Touch  
Speed buttons.  
Plug in the power cord.  
To stop the walking belt, press either of the Stop  
buttons. The four displays will pause and the  
Time/Segment Time display will begin to flash. To  
restart the walking belt, press the Start button or  
2
See page 7.  
Move the on/off switch to the on position.  
the Speed  
L
button. To stop the walking belt and  
3
reset the displays, press a Stop button, remove  
the key, and then reinsert the key.  
Locate the on/off  
switch on the tread-  
On  
Position  
mill near the power  
cord. Move the  
switch to the on posi-  
tion.  
Adjust the incline of the treadmill.  
4
To vary the intensity of  
your exercise, adjust the  
incline of the treadmill  
as desired with the  
Insert the key fully into the console.  
4
Incline buttons. Each  
time a button is pressed,  
the incline will change  
When the key is inserted, the four displays and  
various indicators on the console will light.  
by 0.5%. The incline range is 1.5% to 10%. Note:  
After the buttons are pressed, it may take a mo-  
ment for the treadmill to reach the selected incline  
setting.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
will alternate between one number and the other  
every seven seconds. Note: Each time the Incline  
buttons are pressed, the display will change to  
show the incline setting.  
Follow your progress with the four displays.  
5
Time/Segment Time  
display—When the  
manual mode or an  
iFIT.com program is  
selected, this display  
will show the elapsed  
Speed display—This  
display shows the speed  
of the walking belt.  
time. When a preset  
program or a pulse program is selected, the display  
will show both the time remaining in the program  
and the time remaining in the current segment of  
the program. The display will alternate between  
one number and the other every seven seconds.  
The console can display  
speed in either miles per  
hour or kilometers per  
Calories/Pulse  
hour. The MPH or Km/H  
display—This display  
indicator below the  
shows the approximate  
Speed display will light  
number of calories you  
have burned. When the  
optional chest pulse  
sensor is worn, the dis-  
play will also show your heart rate. The display  
will alternate between one number and the other  
every seven seconds. If the handgrip pulse sensor  
is used, the display will show your heart rate con-  
tinuously while your hands are on the pulse sensor.  
to show which unit of  
measurement is selected. To change the unit of  
measurement, first hold down one of the Stop but-  
tons while inserting the key into the console. The  
Speed display will show an “E” for English miles  
or an “M” for metric kilometers. Press the Speed  
L
button to change the unit of measurement. When  
the desired unit of measurement is selected, re-  
move and then reinsert the key. Note: If speed is  
shown in miles per hour, distance will be shown in  
miles; if speed is shown in kilometers per hour, dis-  
tance will be shown in kilometers.  
To use the hand-  
grip pulse sensor,  
stand on the foot  
rails and place  
your hands on the  
metal contacts on  
Metal  
Contacts  
When you are finished exercising, stop the  
walking belt and remove the key.  
6
the handrail. Your  
palms must be on  
the upper con-  
tacts, and your fin-  
gers must be touching the lower contacts—avoid  
moving your hands. After a few seconds, one or  
two dashes will appear in the Calories/Pulse dis-  
play and then your heart rate will be shown. For  
the most accurate heart rate reading, hold the  
contacts for about 15 seconds.  
Step onto the foot rails, press one of the Stop but-  
tons, and adjust the incline of the treadmill to 1.5%.  
The incline must be at 1.5% when the treadmill  
is raised to the storage position or the treadmill  
will be damaged. Next, remove the key from the  
console and put it in a safe place. Note: If the dis-  
plays and indicators on the console remain lit  
after the key is removed, the console is in the  
“demo” mode. Refer to page 20 and turn off the  
demo mode.  
Distance/Incline  
When you are finished using the treadmill, move  
the on/off switch near the power cord to the off  
position and unplug the power cord.  
display—This display  
shows the distance you  
have walked and the  
incline level of the  
treadmill. The display  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
remaining in the program and the time remaining  
in the current segment. One speed setting and  
one incline setting are programmed for each seg-  
ment. When only three seconds remain in the first  
segment of the program, a series of tones will  
sound and the treadmill will automatically adjust to  
the speed and incline settings for the second seg-  
ment.  
THE PRESET PROGRAMS  
Insert the key fully into the console.  
1
See HOW TO TURN ON THE POWER on page 10.  
Select one of the four preset programs.  
2
The program will continue in this way until the  
Time/Segment Time display counts down to zero.  
The walking belt will then slow to a stop.  
When the key is  
inserted, the  
manual mode  
will be selected  
and the manual  
indicator will  
light. To select  
one of the pre-  
set programs,  
press the Select  
Workout button repeatedly until one of the four  
preset program indicators lights.  
If the speed or incline setting for the current seg-  
ment is too high or too low, you can manually  
override the setting by pressing the Speed or  
Incline buttons on the console. However, when  
the next segment begins, the treadmill will au-  
tomatically adjust to the speed and incline set-  
tings for the next segment.  
To stop the program temporarily, press one of the  
Stop buttons. All displays will pause and the Time/  
Segment Time display will begin to flash. To  
restart the program, press the Start button or the  
The profiles on the console show how the speed  
and incline of the treadmill will change during the  
preset programs—the white profiles show speed  
settings and the green lines show incline settings.  
The numbers at the left ends of the profiles show  
the speed and incline ranges for the programs.  
For example, during the Healthwalk program, the  
speed of the walking belt will be from 2 mph to 4  
mph and the incline will be from 1.5% to 6%. The  
Time/Segment Time display will show how long  
the selected program will last.  
Speed  
L
button. To end the program, press a Stop  
button, remove the key, and then reinsert the key.  
Follow your progress with the four displays.  
4
5
Refer to step 5 on page 11.  
When the program has ended, remove the key.  
Step onto the foot rails and make sure that the in-  
cline of the treadmill is at 1.5%. The incline must  
be at 1.5% when the treadmill is raised to the  
storage position. Next, remove the key from the  
console and put it in a safe place. Note: If the dis-  
plays and indicators on the console remain lit  
after the key is removed, the console is in the  
“demo” mode. Refer to page 20 and turn off the  
demo mode.  
Press the Start button or the Speed  
to start the program.  
L
button  
3
A moment after the button is pressed, the tread-  
mill will automatically adjust to the first speed and  
incline settings for the program. Hold the handrails  
and begin walking.  
Each program is di-  
vided into several time  
segments of different  
lengths. The Time/  
Segment Time display  
will show both the time  
When you are finished using the treadmill, move  
the on/off switch near the power cord to the off  
position and unplug the power cord.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enter a maximum heart rate setting.  
HOW TO USE THE PULSE PROGRAMS  
5
After you have  
entered your  
age, another  
number will  
begin to flash in  
the Calories/  
WARNING:  
If you have heart  
problems, or if you are over 60 years of age  
and have been inactive, do not use the pulse  
programs. If you are taking medication regu-  
larly, consult your physician to find whether  
the medication will affect your exercise heart  
rate. Note: The pulse programs require an  
optional chest pulse sensor.  
Pulse display.  
This number is the maximum heart rate setting for  
the program. If Pulse program 1 is selected, the  
maximum heart rate setting can be from 65% to  
85% of your maximum possible heart rate (your  
maximum possible heart rate is 220 minus your  
age); if Pulse program 2 is selected, the maximum  
heart rate setting can be from 65% to 80% of your  
maximum possible heart rate. Note: Your maxi-  
mum possible heart rate is an estimate only.  
Insert the key fully into the console.  
1
See HOW TO TURN ON THE POWER on page 10.  
Put on the optional chest pulse sensor.  
2
For example, if you are 30 years old, your maxi-  
mum possible heart rate is 190 (220 minus 30  
equals 190). Therefore, if Pulse program 1 is se-  
lected, the maximum heart rate setting can be from  
123 to 161 (65% of 190 is 123; 85% of 190 is 161).  
You must wear the optional chest pulse sensor in  
order to use a pulse program. To put on the chest  
pulse sensor, follow the instructions included with  
the chest pulse sensor.  
If you want to change the maximum heart rate set-  
Select one of the two pulse programs.  
3
ting, press the  
L
and LLbuttons. The buttons can  
be held down to change the setting quickly. When  
the desired setting is shown, press the Enter button.  
When the key is  
inserted, the  
manual mode  
Press the Start button or the Speed  
to start the program.  
L
button  
will be selected  
and the manual  
indicator will  
6
light. To select  
A moment after the button is pressed, the tread-  
mill will automatically adjust to the first speed and  
incline settings for the program. Hold the handrails  
and begin walking.  
one of the pulse programs, press the Select  
Workout button repeatedly until one of the two  
pulse program indicators lights.  
The profiles on the console show how the target  
heart rate will change during the programs. The  
Time/Segment Time display will show how long  
the selected program will last.  
Each program is divided  
into several time seg-  
ments of different  
lengths. The Time/  
Segment Time display  
will show both the time  
remaining in the pro-  
Enter your age.  
4
gram and the time remaining in the current seg-  
ment. One target heart rate setting is programmed  
for each segment. When only three seconds re-  
main in the first segment of the program, a series  
of tones will sound and the next segment will  
begin. As you exercise, the speed and/or incline of  
the treadmill will automatically change as needed  
to keep your heart rate near the current target  
heart rate setting.  
When a pulse  
program is se-  
lected, an age  
setting will begin  
to flash in the  
Calories/Pulse  
display. If you  
have already entered your age, simply press the  
Enter button. To enter your age, press the  
L
and  
L
buttons. The buttons can be held down to enter  
your age quickly. When your age is shown, press  
the Enter button.  
The program will continue until the Time/Segment  
Time display counts down to zero. The walking  
belt will then slow to a stop.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If your heart rate is not detected during the pro-  
gram, the speed and incline of the treadmill may  
automatically decrease until your heart rate is de-  
tected. If this happens, see the instructions in-  
cluded with the chest pulse sensor.  
Follow your progress with the four displays.  
Refer to step 5 on page 11.  
7
8
When the program has ended, remove the key.  
If the speed or incline setting for the current seg-  
ment is too high or too low, you can adjust the set-  
ting with the Speed or Incline buttons. However, if  
you decrease the speed, the incline will automati-  
cally increase; if you increase the speed, the in-  
cline will decrease. If you increase the incline, the  
speed will decrease; if you decrease the incline,  
the speed will increase. The treadmill will always  
attempt to keep your heart rate near the target  
heart rate setting for the current segment. Note:  
When the incline reaches the lowest setting, the  
speed cannot be increased any further. When the  
incline reaches the highest setting, the speed can-  
not be decreased any further.  
Step onto the foot rails and make sure that the in-  
cline of the treadmill is at 1.5%. The incline must  
be at 1.5% when the treadmill is raised to the  
storage position. Next, remove the key from the  
console and put it in a safe place. Note: If the dis-  
plays and indicators on the console remain lit  
after the key is removed, the console is in the  
“demo” mode. Refer to page 20 and turn off the  
demo mode.  
When you are finished using the treadmill, move  
the on/off switch near the power cord to the off  
position and unplug the power cord.  
Pulse programs should not be stopped temporar-  
ily and then restarted. To stop the program before  
it is completed, press a Stop button, remove the  
key, and then reinsert the key.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO CONNECT YOUR PORTABLE STEREO  
HOW TO CONNECT THE TREADMILL TO  
YOUR CD PLAYER, VCR, OR COMPUTER  
Note: If your stereo has an RCA-type AUDIO OUT  
jack, see instruction A below. If your stereo has a  
3.5mm LINE OUT jack, see instruction B. If your  
stereo has only a PHONES jack, see instruction C.  
To use iFIT.com CD’s, the treadmill must be con-  
nected to your portable CD player, portable stereo,  
home stereo, or computer with CD player. See pages  
15 and 16 for connecting instructions. To use iFIT.com  
videocassettes, the treadmill must be connected to  
your VCR. See page 17 for connecting instructions. To  
use iFIT.com programs directly from our internet  
site, the treadmill must be connected to your home  
computer. See page 16 for connecting instructions.  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter. Plug  
the adapter into an AUDIO OUT jack on your stereo.  
A
HOW TO CONNECT YOUR PORTABLE CD PLAYER  
AUDIO OUT  
RIGHT  
LEFT  
Note: If your CD player has separate LINE OUT and  
PHONES jacks, see instruction A below. If your CD  
player has only one jack, see instruction B.  
Audio  
Cable  
Adapter  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the LINE OUT jack on  
your CD player. Plug your headphones into the  
PHONES jack.  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the LINE OUT jack on  
your stereo.  
A
PHONES LINE OUT  
LINE OUT  
PHONES  
B
Head-  
phones  
Audio  
Cable  
LINE OUT  
Audio  
Cable  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into a 3.5mm Y-adapter  
(available at electronics stores). Plug the Y-adapter  
into the PHONES jack on your CD player. Plug your  
headphones into the other side of the Y-adapter.  
C. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into a 3.5mm Y-adapter  
(available at electronics stores). Plug the Y-adapter  
into the PHONES jack on your stereo. Plug your  
headphones into the other side of the Y-adapter.  
B
PHONES  
C
PHONES  
3.5mm  
Y-adapter  
Audio  
Cable  
PHONES  
3.5mm  
Y-adapter  
Audio  
Cable  
Headphones  
Headphones  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO CONNECT YOUR HOME STEREO  
HOW TO CONNECT YOUR COMPUTER  
Note: If your stereo has an unused LINE OUT jack,  
see instruction A below. If the LINE OUT jack is  
being used, see instruction B.  
Note: If your computer has a 3.5mm LINE OUT jack,  
see instruction A. If your computer has only a  
PHONES jack, see instruction B.  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter.  
Plug the adapter into the LINE OUT jack on your  
stereo.  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the LINE OUT jack on  
your computer.  
A
A
CD  
LINE OUT  
VCR  
Amp  
LINE OUT  
Audio  
Cable  
LINE OUT  
Audio  
Cable  
Adapter  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into a 3.5mm Y-adapter  
(available at electronics stores). Plug the Y-adapter  
into the PHONES jack on your computer. Plug your  
headphones or speakers into the other side of the  
Y-adapter.  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter.  
Plug the adapter into an RCA adapter (available at  
electronics stores). Next, remove the wire that is  
currently plugged into the LINE OUT jack on your  
stereo and plug the wire into the unused side of the  
RCA adapter. Plug the RCA adapter into the LINE  
OUT jack on your stereo.  
B
PHONES  
B
CD  
Audio  
Cable  
3.5mm  
Y-adapter  
VCR  
Amp  
LINE OUT  
Headphones/Speakers  
RCA  
Adapter  
Audio  
Adapter  
Cable  
Wire removed from  
LINE OUT jack  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO CONNECT YOUR VCR  
HOW TO USE IFIT.COM CD AND VIDEO  
PROGRAMS  
Note: If your VCR has an unused AUDIO OUT jack,  
see instruction A below. If the AUDIO OUT jack is  
being used, see instruction B. If you have a TV  
with a built-in VCR, see instruction B. If your VCR  
is connected to your home stereo, see HOW TO  
CONNECT YOUR HOME STEREO on page 16.  
To use iFIT.com CD’s or videocassettes, the treadmill  
must be connected to your portable CD player, portable  
stereo, home stereo, computer with CD player, or  
VCR. See HOW TO CONNECT THE TREADMILL TO  
YOUR CD PLAYER, VCR, OR COMPUTER on page  
15. One iFIT.com CD and one iFIT.com videocas-  
sette are included. To purchase other CD’s or  
videocassettes, call toll-free 1-800-735-0768.  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter.  
Plug the adapter into the AUDIO OUT jack on your  
VCR.  
Follow the steps below to use an iFIT.com CD or video  
program.  
A
ANT IN  
.
VIDEO AUDIO  
IN  
RF OUT  
CH  
3
4
OUT  
Insert the key fully into the console.  
1
AUDIO OUT  
RIGHT  
LEFT  
See HOW TO TURN ON THE POWER on page 10.  
Select the iFIT.com mode.  
Audio  
Cable  
2
Adapter  
When the key is in-  
serted, the manual  
mode will be selected.  
To use iFIT.com CD’s or  
videocassettes, press  
the Select Workout but-  
ton repeatedly until the  
iFIT.com indicator lights.  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter.  
Plug the adapter into an RCA adapter (available at  
electronics stores). Next, remove the wire that is  
currently plugged into the AUDIO OUT jack on your  
VCR and plug the wire into the unused side of the  
RCA adapter. Plug the RCA adapter into the AUDIO  
OUT jack on your VCR.  
Insert the iFIT.com CD or videocassette.  
3
If you are using an iFIT.com CD, insert it into your  
CD player. If you are using an iFIT.com videocas-  
sette, insert it into your VCR.  
Press the PLAY button on your CD player or  
VCR.  
4
B
ANT IN  
.
VIDEO AUDIO  
IN  
RF OUT  
CH  
3
4
OUT  
A moment after the button is pressed, your per-  
sonal trainer will begin guiding you through your  
workout. Simply follow your personal trainer’s  
RCA Adapter  
Adapter  
instructions.  
Note: If the Time/Segment Time dis-  
play is flashing, press the Start button or the  
Speed button on the console. The treadmill will  
Audio  
Cable  
L
not respond to a CD or video program when the  
Time/Segment Time display is flashing.  
Wire removed from  
AUDIO OUT jack  
During the CD or video program, an electronic  
“chirping” sound will alert you when the speed  
and/or incline of the treadmill is about to change.  
CAUTION: Always listen for the “chirp” and be  
prepared for speed and/or incline changes. In  
some instances, the speed and/or incline may  
change before the personal trainer describes  
the change.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If the speed or incline settings are too high or too  
low, you can manually override the settings at any  
time by pressing the Speed or Incline buttons on  
the console. However, when the next “chirp” is  
heard, the speed and/or incline will change to  
the next settings of the CD or video program.  
• Adjust the volume of your CD player or VCR.  
If the volume is too high or too low, the con-  
sole may not detect the program signals.  
• Make sure that the audio cable is properly  
connected, that it is fully plugged in, and that  
it is not wrapped around a power cord.  
To stop the walking belt at any time, press a Stop  
button on the console. The Time/Segment Time  
display will begin to flash. To restart the program,  
press the Start button. After a moment, the walk-  
ing belt will begin to move at 1.0 mph. When the  
next “chirp” is heard, the speed and incline  
will change to the next settings of the CD or  
video program. The program can also be  
stopped by pressing the stop button on your CD  
player or VCR.  
• If you are using your portable CD player and  
the CD skips, set the CD player on the floor or  
another flat surface instead of on the console.  
Follow your progress with the four displays.  
5
6
See step 5 on page 11.  
When the program is completed, remove the  
key.  
When the CD or video program is completed, the  
walking belt will stop and the Time/Segment Time  
display will begin to flash. Note: To use another  
CD or video program, press a Stop button or re-  
move the key and go to step 1 on page 17.  
See step 5 on page 12.  
CAUTION: Always remove iFIT.com CD’s and  
videocassettes from your CD player or VCR  
when you are finished using them.  
Note: If the speed or incline of the treadmill  
does not change when a “chirp” is heard:  
• Make sure that the iFIT.com indicator is lit and  
that the Time/Segment Time display is not  
flashing. If the Time/Segment Time display is  
flashing, press the Start button or the Speed  
L
button on the console.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Return to the treadmill and stand on the foot  
rails. Find the clip attached to the key and slide  
the clip onto the waistband of your clothing.  
HOW TO USE PROGRAMS DIRECTLY FROM  
OUR INTERNET SITE  
7
When the on-screen countdown ends, the program  
will begin and the walking belt will begin to move.  
Hold the handrails, step onto the walking belt, and  
begin walking.  
access a selection of programs that interactively con-  
trol your treadmill to help you achieve your specific ex-  
ercise goals. In addition, you can play iFIT.com audio  
and video programs directly from the internet. By  
adding an optional upgrade module to the console, you  
can use virtually endless features on our internet site.  
grade module, call toll-free 1-800-735-0768.  
During the program, an electronic “chirping” sound  
will alert you when the speed and/or incline of the  
treadmill is about to change. CAUTION: Always  
listen for the “chirp” and be prepared for speed  
and/or incline changes.  
To use programs from our internet site, the treadmill  
must be connected to your home computer. See HOW  
TO CONNECT YOUR COMPUTER on page 16. In  
addition, you must have an internet connection and  
an internet service provider. A list of specific system  
requirements will be found on our internet site.  
If the speed or incline settings are too high or too  
low, you can manually override the settings at any  
time by pressing the Speed or Incline buttons on  
the console. However, when the next “chirp” is  
heard, the speed and/or incline will change to  
the next settings of the program.  
Follow the steps below to use a program from our  
internet site.  
To stop the walking belt at any time, press a Stop  
button on the console. The Time/Segment Time  
display will begin to flash. To restart the program,  
press the Start button. After a moment, the walk-  
ing belt will begin to move at 1.0 mph. When the  
next “chirp” is heard, the speed and incline will  
change to the next settings of the program.  
Insert the key fully into the console.  
1
See HOW TO TURN ON THE POWER on page 10.  
Select the iFIT.com mode.  
2
When the program is completed, the walking belt  
will stop and the Time/Segment Time display will  
begin to flash. Note: To use another program,  
press a Stop button and go to step 5.  
When the key is in-  
serted, the manual  
mode will be selected  
and the manual indica-  
tor will light. To use a  
program from our inter-  
net site, press the  
Note: If the speed or incline of the treadmill  
does not change when a “chirp” is heard, make  
sure that the iFIT.com indicator is lit and that  
the Time/Segment Time display is not flashing.  
In addition, make sure that the audio cable is  
properly connected, that it is fully plugged in,  
and that it is not wrapped around a power cord.  
Program Select button repeatedly until the  
iFIT.com indicator lights.  
Go to your computer and start an internet  
connection.  
3
Follow your progress with the four displays.  
See step 5 on page 11.  
8
9
Start your web browser, if necessary, and go to  
4
Follow the desired links on our internet site to  
select a program.  
When the program has ended, remove the key.  
See step 5 on page 12.  
5
Read and follow the on-line instructions for using a  
program.  
Follow the on-line instructions to start the  
program.  
6
When you start the program, an on-screen count-  
down will begin.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE INFORMATION MODE/DEMO MODE  
THE OPTIONAL CHEST PULSE SENSOR  
The console features an information mode that keeps  
track of the total number of hours that the treadmill has  
been operated and the total number of miles that the  
walking belt has moved. The information mode also al-  
lows you to switch the console from miles per hour to  
kilometers per hour. In addition, the information mode  
allows you to turn on and turn off the demo mode.  
An optional chest pulse sensor adds even more  
features to the console. The chest pulse sensor contin-  
uously monitors your heart rate during your workouts  
and allows you to use the console’s two pulse pro-  
grams. To purchase the optional chest pulse sen-  
sor, call toll-free 1-800-201-2172.  
To select the information mode, hold down one of the  
Stop buttons while inserting the key into the console.  
When the information mode is selected, the following  
information will be shown:  
The Time/Segment Time  
display will show the total  
number of hours that the  
treadmill has been used.  
THE OPTIONAL IFIT.COM MODULE  
The Distance/Incline display  
will show the total number of  
miles that the walking belt  
has moved.  
By adding an optional  
iFIT.com module to the  
treadmill, you can use  
virtually endless features  
from our internet site.  
Imagine on-line competi-  
An “E,” for English miles, or  
an “M,” for metric kilometers,  
will appear in the Speed dis-  
tions, personal training  
sessions via the internet,  
and the ability to use  
play. Press the Speed  
button to change the unit of  
measurement.  
L
your computer to track your workouts. For information  
about purchasing the optional iFIT.com module,  
call toll-free 1-800-690-4990.  
IMPORTANT: The  
Calories/Pulse display  
should be blank. If a “d”  
appears in the display, the  
console is in the “demo”  
mode. This mode is in-  
tended to be used only  
when a treadmill is displayed in a store. When the con-  
sole is in the demo mode, the power cord can be  
plugged in, the key can be removed from the console,  
and the displays and indicators on the console will au-  
tomatically light in a preset sequence, although the but-  
tons on the console will not operate. If a “d” appears  
in the Calories/Pulse display when the information  
mode is selected, press the Speed  
Calories/Pulse display is blank.  
L
button so the  
To exit the information mode, remove the key from the  
console.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO FOLD AND MOVE THE TREADMILL  
HOW TO FOLD THE TREADMILL FOR STORAGE  
Before folding the treadmill, adjust the incline to the  
lowest position. If this is not done, the treadmill may be  
permanently damaged. Next, unplug the power cord.  
Caution: You must be able to safely lift 45 pounds (20  
kg) in order to raise, lower, or move the treadmill.  
1. Hold the treadmill in the locations shown at the right. To  
decrease the possibility of injury, bend your legs and  
keep your back straight. As you raise the treadmill,  
make sure to lift with your legs rather than your back.  
Raise the treadmill about halfway to the vertical position.  
2. Move your right hand to the position shown and hold the  
treadmill firmly. Using your left hand, pull the latch knob  
to the left and hold it. Raise the treadmill until all parts of  
the treadmill are past the latch pin. Release the latch  
knob. Make sure that the latch knob is fully released  
so the latch pin is securely holding the catch.  
Latch  
Pin  
To protect the floor or carpet from damage, place a  
mat under the treadmill. Keep the treadmill out of  
direct sunlight. Do not leave the treadmill in the stor-  
age position in temperatures above 85° Fahrenheit.  
Latch  
Knob  
Catch  
HOW TO MOVE THE TREADMILL  
Before moving the treadmill, convert the treadmill to the  
storage position as described above. Make sure that the  
latch pin is securely holding the catch.  
1. Hold the handrails and place one foot on the base.  
2. Tilt the treadmill back until it rolls freely on the wheels.  
Carefully move the treadmill to the desired location. To  
reduce the risk of injury, use extreme caution while  
moving the treadmill. Do not attempt to move the  
treadmill over an uneven surface.  
3. Place one foot on the base, and carefully lower the tread-  
mill until it is resting in the storage position.  
Base  
Front Wheels  
HOW TO LOWER THE TREADMILL FOR USE  
1. Hold the treadmill with your right hand as shown. Using  
your left hand, pull the latch knob to the left and hold it.  
Pivot the treadmill down until all parts of the treadmill are  
past the pin. Slowly release the latch knob.  
Latch  
Knob  
2. See the drawing at the top of this page. Hold the tread-  
mill firmly with both hands, and lower the treadmill to the  
floor. To decrease the possibility of injury, bend your  
legs and keep your back straight.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLE-SHOOTING AND MAINTENANCE  
Most treadmill problems can be solved by following the instructions below. If further assistance is  
needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday,  
6 a.m. until 6 p.m. Mountain Time (excluding holidays).  
PROBLEM  
SOLUTION  
1. The power does not  
turn on  
a. Make sure that the power cord is plugged into a surge suppressor, and that the  
surge suppressor is plugged into a properly grounded outlet (see page 7). Use  
only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage  
surge suppressor (TVSS). The surge suppressor must have a UL suppressed  
voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules.  
The surge suppressor must be electrically rated for 120 volts AC and 15 amps.  
Important: The treadmill is not compatible with GFCI-equipped outlets.  
b. Make sure that the key is fully inserted into the console.  
c. Check the circuit breaker located on the frame near  
c
the power cord. If the switch protrudes as shown, the  
circuit breaker has tripped. To reset the circuit  
breaker, wait for five minutes and then press the  
switch back in.  
Tripped  
Reset  
d. Check the on/off switch located on the frame near  
the power cord. The switch must be in the on posi-  
tion.  
d
On  
Position  
2. The power turns off  
during use  
a. Check the circuit breaker located on the treadmill frame near the power cord (see  
1. c. above). If the circuit breaker has tripped, wait for five minutes and then press  
the switch back in.  
b. Make sure that the power cord is plugged in.  
c. Remove the key from the console and then reinsert it.  
d. Make sure that the on/off switch is in the on position (see 1. d. above).  
3. The walking belt  
slows when walked  
on  
a. Make sure that only an appropriate surge suppressor is used (see 1. a. above).  
b. If the walking belt is overtightened, tread-  
b
mill performance may decrease and the  
walking belt may become damaged.  
3–4”  
Remove the key and UNPLUG THE  
POWER CORD. Using the allen wrench,  
turn both rear roller adjustment bolts  
counterclockwise, 1/4 of a turn. When the  
walking belt is properly tightened, you  
should be able to lift each side of the  
walking belt 3 to 4 inches off the walking  
Rear Roller Adjustment Bolts  
platform. Be careful to keep the walking  
belt centered. Plug in the power cord, insert the key and run the treadmill for a few  
minutes. Repeat until the walking belt is properly tightened.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROBLEM  
SOLUTION  
4. The walking belt is  
off-center or slips  
when walked on  
a. Remove the key and UNPLUG THE  
POWER CORD. If the walking belt has  
shifted to the left, use the allen wrench to  
turn the left rear roller bolt clockwise 1/2 of  
a turn. Be careful not to overtighten the  
walking belt. If the walking belt has  
a
shifted to the right, turn the left rear roller  
bolt counterclockwise 1/2 of a turn. Plug in  
the power cord, insert the key and run the  
treadmill for a few minutes. Repeat until the walking belt is centered.  
b. If the walking belt slips when walked on,  
b
first remove the key and UNPLUG THE  
POWER CORD. Using the allen wrench,  
turn both rear roller bolts clockwise 1/4 of a  
turn. When the walking belt is correctly  
tightened, you should be able to lift each  
side of the walking belt 3 to 4 inches off the  
walking platform. Be careful to keep the  
walking belt centered. Plug in the power  
cord, insert the key and carefully walk on the treadmill for a few minutes. Repeat  
until the walking belt is properly tightened.  
a. Remove the key from the console and UN-  
5. The displays of the  
console do not func-  
tion properly  
a
PLUG THE POWER CORD. Next, remove  
the screws from the hood and carefully re-  
1/8”  
11  
20  
26  
move the hood. Locate the Reed Switch  
(26) and the Magnet (85) on the left side of  
the Pulley (11). Turn the Pulley until the  
Magnet is aligned with the Reed Switch.  
Make sure that the gap between the  
Magnet and the Reed Switch is about  
1/8”. If necessary, loosen the Reed Switch  
85  
Top  
View  
Screw (20) and move the Reed Switch slightly. Retighten the Screw. Re-attach the  
hood, and run the treadmill for a few minutes to check for a correct speed reading.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONDITIONING GUIDELINES  
is to burn fat, adjust the speed and incline of the tread-  
mill until your heart rate is near the lowest number in  
your training zone.  
WARNING:  
Before beginning this  
or any exercise program, consult your physi-  
cian. This is especially important for individu-  
als over the age of 35 or individuals with pre-  
existing health problems.  
For maximum fat burning, adjust the speed and incline  
of the treadmill until your heart rate is near the middle  
number in your training zone.  
The pulse sensor is not a medical device.  
Various factors, including your movement,  
may affect the accuracy of heart rate readings.  
The sensor is intended only as an exercise aid  
in determining heart rate trends in general.  
Aerobic Exercise  
If your goal is to strengthen your cardiovascular sys-  
tem, your exercise must be “aerobic.” Aerobic exercise  
is activity that requires large amounts of oxygen for  
prolonged periods of time. This increases the demand  
on the heart to pump blood to the muscles, and on the  
lungs to oxygenate the blood. For aerobic exercise,  
adjust the speed and incline of the treadmill until your  
heart rate is near the highest number in your training  
zone.  
The following guidelines will help you to plan your ex-  
ercise program. For more detailed exercise informa-  
tion, obtain a reputable book or consult your physician.  
EXERCISE INTENSITY  
WORKOUT GUIDELINES  
Whether your goal is to burn fat or to strengthen your  
cardiovascular system, the key to achieving the  
desired results is to exercise with the proper intensity.  
The proper intensity level can be found by using your  
heart rate as a guide. The chart below shows recom-  
mended heart rates for fat burning and aerobic exercise.  
Each workout should include the following three parts:  
A Warm-up—Start each workout with 5 to 10 minutes  
of stretching and light exercise. A proper warm-up in-  
creases your body temperature, heart rate and circula-  
tion in preparation for exercise.  
Training Zone Exercise—After warming up, increase  
the intensity of your exercise until your pulse is in your  
training zone for 20 to 60 minutes. (During the first few  
weeks of your exercise program, do not keep your  
pulse in your training zone for longer than 20 minutes.)  
Breathe regularly and deeply as you exercise—never  
hold your breath.  
To find the proper heart rate for you, first find your age  
near the bottom of the chart (ages are rounded off to  
the nearest ten years). Next, find the three numbers  
above your age. The three numbers define your “train-  
ing zone.” The lower two numbers are recommended  
heart rates for fat burning; the higher number is the  
recommended heart rate for aerobic exercise.  
A Cool-down—Finish each workout with 5 to 10 min-  
utes of stretching to cool down. This will increase the  
flexibility of your muscles and will help prevent post-ex-  
ercise problems.  
EXERCISE FREQUENCY  
Fat Burning  
To maintain or improve your condition, complete three  
workouts each week, with at least one day of rest be-  
tween workouts. After a few months, you may com-  
plete up to five workouts each week if desired.  
To burn fat effectively, you must exercise at a relatively  
low intensity level for a sustained period of time.  
During the first few minutes of exercise, your body  
uses easily accessible carbohydrate calories for en-  
ergy. Only after the first few minutes does your body  
begin to use stored fat calories for energy. If your goal  
The key to success is to make exercise a regular and  
enjoyable part of your everyday life.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUGGESTED STRETCHES  
The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce.  
1. Toe Touch Stretch  
1
Stand with your knees bent slightly and slowly bend forward from  
your hips. Allow your back and shoulders to relax as you reach  
down toward your toes as far as possible. Hold for 15 counts,  
then relax. Repeat 3 times. Stretches: Hamstrings, back of knees  
and back.  
2. Hamstring Stretch  
Sit with one leg extended. Bring the sole of the opposite foot to-  
ward you and rest it against the inner thigh of your extended leg.  
Reach toward your toes as far as possible. Hold for 15 counts,  
then relax. Repeat 3 times for each leg. Stretches: Hamstrings,  
lower back and groin.  
2
3. Calf/Achilles Stretch  
With one leg in front of the other, reach forward and place your  
hands against a wall. Keep your back leg straight and your back  
foot flat on the floor. Bend your front leg, lean forward and move  
your hips toward the wall. Hold for 15 counts, then relax. Repeat  
3 times for each leg. To cause further stretching of the achilles  
tendons, bend your back leg as well. Stretches: Calves, achilles  
tendons and ankles.  
3
4
4. Quadriceps Stretch  
With one hand against a wall for balance, reach back and grasp  
one foot with your other hand. Bring your heel as close to your  
buttocks as possible. Hold for 15 counts, then relax. Repeat 3  
times for each leg. Stretches: Quadriceps and hip muscles.  
5. Inner Thigh Stretch  
Sit with the soles of your feet together and your knees outward.  
Pull your feet toward your groin area as far as possible. Hold for  
15 counts, then relax. Repeat 3 times. Stretches: Quadriceps and  
hip muscles.  
5
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART LIST—Model No. HRTL05910  
R0801A  
To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual.  
Key  
Key  
No. Qty. Description  
No. Qty. Description  
1
2
3
4
5
6
7
8
1
4
6
3
1
6
4
2
2
2
1
2
2
2
1
4
1
1
2
21  
2
1
1
1
1
1
1
1
1
2
1
1
1
1
16  
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
Motor Hood  
Hood Screw  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
100  
1
2
2
2
2
1
1
1
2
1
1
1
2
1
2
2
1
1
1
1
1
1
1
3
1
8
1
2
1
1
1
1
1
1
1
1
1
1
1
1
2
2
7
5
1
2
3
2
2
2
Frame  
Rear Wheel  
Platform Screw  
Roller Adjustment Washer  
Latch Catch  
Latch Catch Screw/Hand Grip Screw  
Isolator  
Rear Wheel Bolt  
Rear Roller Guard  
Rear Wheel Nut  
Rear Roller  
Right Endcap  
iFIT.com Videocassette  
Rear Roller Adj.Bolt  
Left Endcap  
Allen Wrench  
Walking Platform  
Handrail Grip  
Stop Bracket  
Crossbar Bolt  
Crossbar Washer  
Latch Knob  
Latch Knob Sleeve  
Latch Spring  
Latch Knob Collar  
Pin Clip  
Latch Pin  
Pulse Bar  
Console Base Screw  
Console Base Cover  
Cover Screw  
Pulse Sensor Cover  
Sensor Cover Screw  
Key/Clip  
Console Base  
Book Holder Lens  
Console  
Power Bracket Washer  
Belt Guide  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34*  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
Frame Pivot Bolt  
Front Roller/Pulley  
Incline Motor Spacer  
Incline Motor Bolt  
Incline Motor Nut  
Incline Motor  
Lift Frame Bushing  
Pulse Mounting Plate  
Front Roller Adj. Bolt  
Side Hood Tab  
Utility Screw  
Wheel Spacer  
Front Hood Tab  
Reed Switch Clip  
Motor  
2-lb. Hand Weight  
Reed Switch  
Motor Belt  
Pulley/Flywheel/Fan  
Motor Tension Bolt  
Motor Tension Washer  
Motor Star Washer  
Motor Tension Nut  
Motor Pivot Bolt  
Motor/Pulley/Flywheel/Fan  
Screw  
Lift Frame  
Releasable Tie  
Magnet  
Cable Tie Clamp  
8” Power Wire  
8” Cable Tie  
Choke  
Chest Pulse Sensor  
Circuit Breaker  
On/Off Switch  
Power Cord  
Power Cord Grommet  
Outlet Bracket  
Jack  
iFIT.com Wire  
Console Screw  
Endcap Spacer  
Lift Frame Nut/Wheel Nut  
Base Pad  
Left Foot Grip  
Upright Base Cap  
Warning Decal  
Wheel Bolt  
Controller  
Power Supply  
Plastic Stand-Off  
Electronics Bracket  
Belly Pan  
Upright Wire Harness  
Right Foot Grip  
Walking Belt  
Base Wheel  
Wheel Insert  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key  
Key  
No. Qty. Description  
No. Qty. Description  
101  
102  
103  
104  
105  
106  
107  
108  
1
1
1
1
2
2
1
1
12” Audio Wire  
Large Warning Decal  
Upright Base  
Shock  
Lift Frame Spacer  
Static Decal  
#
#
#
#
1
1
1
1
4” Blue Wire, 2 Female  
8” White Wire, M/F  
14” Blue Wire, 2 Female  
User's Manual  
*Includes all parts shown in the box.  
Latch Assembly  
iFIT.com CD  
**These parts are optional. For information about the  
iFIT.com module, call toll-free 1-800-690-4990. For  
information about the optional chest pulse sensor,  
see page 20.  
109** 1  
iFIT.com Module  
8” Green Wire, F/Ring  
7” Green Wire, M/Ring  
4” Black Wire, 2 Female  
8” White Wire, 2 Female  
8” Red Wire, M/F  
8” Blue Wire, M/F  
8” Black Wire, 2 Ring  
#
#
#
#
#
#
#
1
1
1
1
1
1
1
#These parts are not illustrated  
Specifications are subject to change without notice.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLODED DRAWING—Model No. HRTL05910  
R0801A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLODED DRAWING—Model No. HRTL05910  
R0801A  
.
G R O U P  
L I T  
K i r k N P i R  
e
O b D e U r g C T l l  
a
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO ORDER REPLACEMENT PARTS  
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through  
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). Before calling, please note the following  
information:  
• The MODEL NUMBER of the product (HRTL05910)  
• The NAME of the product (HealthRider® Softstrider S300i™ treadmill)  
• The SERIAL NUMBER of the product (see the front cover of this manual)  
• The KEY NUMBER and DESCRIPTION of the replacement part(s) (see the PART LIST on pages 26 and 27  
and the EXPLODED DRAWING attached in the center of this manual).  
HealthRider® is a registered trademark of ICON Health & Fitness, Inc.  
LIMITED WARRANTY  
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and  
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-  
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-  
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.  
All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not  
extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,  
improper or abnormal usage or repairs not provided by an ICON authorized service center, products used  
for commercial or rental purposes, or products used as store display models. No other warranty beyond  
that specifically set forth above is authorized by ICON.  
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-  
nection with the use or performance of the product or damages with respect to any economic loss, loss of  
property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other con-  
sequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-  
dental or consequential damages. Accordingly, the above limitation may not apply to you.  
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of  
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth  
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the  
above limitation may not apply to you.  
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.  
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813  
Part No. 175890 R0801A  
Printed in USA © 2001 ICON Health & Fitness, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Haier Freezer HF 130 User Manual
Hamilton Beach Microwave Oven 87106 User Manual
Harbor Freight Tools Saw 41453 User Manual
Harbor Freight Tools Thermometer 94233 User Manual
Harman Kardon Stereo Receiver AVR 360 User Manual
Honeywell Thermostat 72838 User Manual
Hotpoint Cooktop EC604 User Manual
HP Hewlett Packard Tablet TC1100 User Manual
Hunter Fan Air Cleaner 30059 User Manual
Impex Home Gym WM 343 User Manual