INSTALL INSTRUCTIONS WGI-D23-1 & 6
INTERIOR WINDOW GUARDS
2006-2007 DODGE CHARGER
TOOLS REQUIRED:
Power drill
Drill bits – 1/8”, 5/32”
T-25 tamperproof torx bit
Phillips screwdriver
HARDWARE:
QTY DESCRIPTION
PART #
2
8
8
4
4
Upper mounting bracket
WGI-MB-12-90
GSM33195
GSM33194
GSM34190
GSM31005
#10 x ¾” Sheet metal screw
#10 x ½” Sheet metal screw
¼” x ½” T-25 Tamperproof bolts
¼” Flat Washers
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit
SUBASSEMBLY:
1. Bend window guard so it contours the door as
shown in photo #1.
2. Determine the proper window guard for each
window.
3. If installing aluminum door panels refer to those
instructions at this time. They will need to be
installed first.
WGI-D23-INST-10-06
Download from Www.Somanuals.com. All Manuals Search And Download.
|