Harman Kardon DVD Player DMC 1000 User Manual

DMC 1000 Digital Media Center

OWNER’S MANUAL

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

you take your music with you in a wide range of

portable players, or in your car.

Movies

Thank you for choosing the

Harman Kardon DMC 1000

I Extensive Programming Capability for

Audio and Video Discs

Additional features of the DMC 1000 include

iPod audio playback through Harman Kardon’s

optional The Bridge accessory, with charging and

navigation available to any zone in your system.

System control options include the unit’s backlit

remote, optional external IR sensor/receivers, RS-

232-based control for popular home automation

systems, custom-programmed home network

control and even wireless control through a

Windows Mobile®-based PDA when an optional

wireless bridge is connected.

The DMC 1000 merges a high-end DVD player,

including upscaling to 1080p with an HDMI™

output, with a media server capable of storing up

to 60,000 songs on its 250Gb hard drive.

Simultaneous playback of different tracks is possi-

ble in up to four zones, or you may link any or all

of the zones to each other.

I Multiple Options for Language,

Soundtrack and Subtitle Selection

I Multiple-Angle Capabilities With

Specially Encoded DVD Discs

I Backlit, Ergonomically Designed

Remote Control

Thanks to Gracenote® MusicID,®* all content

recorded from a CD to the DMC 1000’s hard

drive is identified by album name, artist and

genre, with additional information to show the

title of each track. Even better, for most popular

albums, the DMC 1000 will display the cover art

when connected to the Internet. The content is

automatically organized by the identification

fields and by the cover, and you may select it and

program playlists to suit any mood or occasion.

The graphical presentation of system content is

available in both high-definition and standard-

definition outputs, for crisp, easy-to-read displays

on any video screen.

READ THIS BEFORE OPERATING

YOUR UNIT

Install this DVD-Player in a well ventilated, cool,

dry, clean place with at least 10 cm on the top,

10 cm on the left and right, and 10 cm at the

back – away from direct sunlight, heat sources,

vibration, dust, moisture, and/or cold.

Avoid installing this unit where foreign object

may fall onto this unit and/or this unit may be

exposed to liquid dripping or splashing. On the

top of this unit, do not place:

If you have additional questions about this

product or its installation or operation that are

not answered in this manual, please contact your

dealer, as he is your best source of local infor-

mation.

I Plays a Wide Range of Video and Audio

Formats, Including DVD-Video Discs,

VCD, Standard CD Audio Discs, CD-R/RW,

DVD-R/RW, DVD+R/RW, Audio Discs and

MP3 Discs

– Burning objects (i.e. candles), as they may

cause fire, damage to this unit, and/or personal

injury.

To enable you to get the maximum quality from

DVDs, the DVD is equipped with the latest in

design techniques, including advanced 10-bit

video digital-to-analog converters (DAC) and

Video (composite), S-Video and RGB video (RGB

via SCART) outputs, to ensure that you get all the

quality inherent in today’s DVD medium.

For optimum playback of NTSC and PAL DVD with

compatible high-definition display devices, DVD is

equipped with progressive component video

outputs.

I DVD playback upscaled to 1080p with

HDMI 1.1 output for single-wire

connections

I Front- and rear panel USB input for

playing compatible music or image files

from portable devices and for recording

music files

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the

user and/or damage to this unit.

Do not cover this unit with a newspaper, table-

cloth, curtain, etc. in order not to obstruct heat

radiation. If the temperature inside this unit rises,

it may cause fire, damage to this unit, and/or

personal injury.

I Automatically records from CD to inter-

nal Media Library (250GB HDD, equal to

60.000 songs)

I Streams audio to up to four independ-

ent zones simultaneously, allowing dif-

ferent areas of the home to enjoy

unique programs

When used with an HDMI-compatible

audio/video receiver and video display, the pro-

gram quality is preserved.

By passing an uncompressed signal, degradation

is virtually nonexistent. And the single-cable

connection eliminates the problem of wire

management.

Install this unit near the AC outlet and where the

AC power plug can be reached easily.

I GraceNote music recognition service*

for identification of album name, artist

and genre, as well as displaying cover art

This unit is not disconnected from the AC power

source as long as it is connected to the wall

outlet, even if this unit itself is turned off. This

state is called the standby mode. In this state,

this unit is designed to consume a very small

quantity of power.

I Plays audio and video files from, and

records from a CD to, solid-state media

cards or USB drives

If you have not yet upgraded to an HDMI video

display, you may still enjoy pristine picture quality

with the DMC 1000’s precision video DACs,

which output a Y/Pr/Pb progressive-scan compo-

nent signal and composite and S-video. Thus, no

matter what type of video display used, you will

see images that are the closest thing to the

original film or performance this side of your local

theater.

I High-quality video reproduction with

pixel-by-pixel processing, progressive

scan output and 3/2 pull-down

reconstruction

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

I High-Quality Video Playback 10-Bit

DACs, Progressive Scan and Component

Video Outputs

When playing audio CDs, the playback quality is

state-of-the-art, matching that of the finest play-

ers available.

I Dolby Digital and DTS Data Signal

Output Through Both Optical and

Coaxial Digital Audio Connections

In addition to DVD and CD playback, the DMC

1000 offers audio and still-image playback from

both solid-state media cards and USB drives. You

can even record analog sources such as your old

tapes, cassettes and even vinyl records (with an

optional, external phono preamp) to store virtual-

ly any audio content for instant playback. And the

DMC 1000 allows content to be transferred from

the hard drive to the memory cards or a USB

drive, or even a recordable CD. This flexibility lets

I Audiophile-Grade Output DACs for the

Finest Audio reproduction

I Easy-to-Use On-Screen Navigation

System

I Playback of MP3 and Windows^®

WMA

Audio Discs and JPEG image files

I Parental Lock Controls Prevent

Unauthorized Viewing of Restricted

INTRODUCTION 3

* Music recognition technology and related data are provided by Gracenote. Gracenote is the industry standard

in music recognition technology and related content delivery. For more information, visit www.gracenote.com.

Download from Www.Somanuals.com. All Manuals Search And Download.

Terminology

Multizone: A multizone system is used to dis-

tribute audio to various rooms in the house so

that the occupants of each room may independ-

ently choose different program material. The

DMC 1000 permits up to four different zones to

stream audio simultaneously. Multizone control is

usually set up by the custom installer, using

either control devices connected to a home net-

work, or devices connected to the DMC 1000’s

RS-232 port.

HDCP (High-Bandwidth Digital Content

Protection): HDCP is the specification for

protecting digitally encoded content from

unauthorized copying when it is transmitted from

a DVD player (or other video source) to a video

display using HDMI or DVI connections. In order

to take advantage of the high-resolution output

of the DMC 1000 via its HDMI output, your dis-

play must be HDCP-compliant. Virtually all dis-

plays with HDMI inputs are HDCP-compliant, but

not all DVI-equipped displays are. If you are

using the DMC 1000 with an optional HDMI-to-

DVI cable or adapter, check the owner’s manual

for your display to determine whether it is

HDCP-compliant.

Terminology

Since they share some of the characteristics and

technology of CD players, many of the terms and

operational concepts used in a DVD player are

similar to what you may be familiar with from CD

players and changers, or older video disc formats

such as Laser Disc. However, if this is your first

DVD product, some of the terms used to describe

the features of a DVD player may be unfamiliar.

The following explanations should solve some of

the mysteries of DVD, and help you to enjoy all

the power and flexibility of the DVD format and

the DVD.

Server: A server is a computer device with a

large amount of storage that delivers content to

other devices. The DMC 1000 may be accessed

as a server from a home network when appropri-

ate devices are connected. When placed in Server

Mode, the DMC 1000 may still be used as a serv-

er, even though its four zones are inactive.

With the arrival of DVD, disc data capacity has

increased dramatically. On a DVD Video disc most

of this capacity is taken up by MPEG 2 video and

the multichannel movie soundtrack in Dolby

Digital and/or DTS. This information is

compressed.

HDMI^™

(High-Definition Multimedia

Interface^™): HDMI is a serial-bus form of

communication between the DVD player and the

video display or audio/video receiver. With 5Gbps

of bandwidth, it is capable of passing

Zone: A zone is a section of a multizone system

in which all loudspeakers in the zone play the

same source program. By connecting the DMC

1000’s audio outputs for a specific zone to a

multichannel amplifier, you may include a num-

ber of loudspeakers in a variety of room locations

within the zone. Example: A four-channel amplifi-

er connected to the Zone 2 Outputs may power a

pair of speakers in the living room and a stereo

ceiling speaker in the connected dining room, so

that you and your guests may enjoy the same

program anywhere within the zone.

Aspect Ratio: This is a description of the width

of a video image in relation to its height.

A conventional video screen is four units wide for

every three units of height, that’s why the ratio is

called ”4:3”. Newer wide aspect ratio video

displays are 16 units wide for every nine units of

height, making them more like the screen in a

movie theater. The program material on a DVD

may be recorded in either format and, in

addition, you may configure the DVD to play

back in either format, depending on the features

recorded on a disc.

uncompressed digital audio and high-definition

digital video using a single cable. With HDMI, the

DMC 1000 is capable of outputting high-

resolution (720p or 1080p) video and

5.1-channel Dolby Digital or DTS digital audio,

with the convenience of just a single cable

connection.

JPEG Files: JPEG stands for the Joint

Photographic Experts Group, which developed a

standard for compressing still images, such as

photographs. JPEG files may be created on a

personal computer by importing images from a

digital camera, or scanning printed photographs.

These files may be burned onto a compact disc.

The DMC 1000 is capable of recognizing JPEG

files and enabling you to view them on your

video screen.

Component Video: This form of video signal

eliminates many of the artifacts of traditional

composite video signals by splitting the signal

into a separate luminance channel (the “Y”

signal channel) and two color-difference signals

(the Pr and Pb signal channels). With a

component video connection, you will see

greater picture resolution and eliminate many

picture imperfections such as the moiré patterns

often seen on check-patterned cloth. However, in

order to benefit from component video, you must

have a video display with Y/Pr/Pb component

video inputs. Do not connect the component

video outputs of the DMC 1000 to the standard

composite or S-video inputs of a TV or recorder.

Media Library: The Media Library refers to the

content stored on the DMC 1000’s internal hard-

disc drive. It contains all of the content that you

have transferred to the DMC 1000, including

copies of audio CDs, captures of audio streams

from the Auxiliary Analog Audio Inputs, and MP3

audio and JPEG image files transferred from

memory cards, discs or USB drives. The Media

Library automatically organizes the content so

that you may view it by track name, album, artist,

genre, cover art (when available) or playlists that

you have created. When a multizone system has

been connected, each zone may access different

content stored in the Media Library. When con-

nected to other properly programmed devices in

the home using the Network Jack or the RS-232

Port, the Media Library may be used as a server,

allowing you to enjoy content throughout your

home.

Title: For a DVD, a title is defined as an entire

movie or program. There can be as many chapters

within a title as the producers decide to include.

Most discs include only one title, but some may

have more than one, to give you a “Double

Feature” presentation.

Chapter: DVD programs are divided into

chapters and titles. Chapters are the sub-sections

programmed into a single title on a disc.

Chapters may be compared to the individual

tracks on an audio CD.

4 TERMINOLOGY

Download from Www.Somanuals.com. All Manuals Search And Download.

Terminology

RGB Video: This is a new form of video signal

that eliminates many of the artifacts of

traditional composite video signals by splitting

the signal into the three fundamental colors

Red, Green and Blue (RGB). With an RGB con-

nection (via SCART), you will see greater picture

resolution and eliminate many picture

imperfections such as the moiré patterns often

seen on checkered patterned cloths. However, in

order to benefit from RGB video, you must have

a video display with an RGB compatible SCART

input.

Multiple Angle: DVDs have the capability to

show up to four different views of the same

scene in a program. When a disc is encoded with

multiple-angle information, pressing the Angle

button will enable you to switch between these

different views. Note that at present, few discs

take advantage of this capability and, when they

do, the multiple-angle technology may only be

present for short periods of time within the disc.

Producers will usually insert some sort of icon or

graphic in the picture to alert you to the

availability of multiple viewing angles.

Progressive Scan: Due to the immense data

storage capacity of DVD, images are nowadays

stored progressively (intact, rather than

interlaced). This allow all of the lines in each

frame (odd and even) to be shown at the same

time. DMC 1000 comes with true progressive

scan video output resulting in a 40% greater

light output than a conventional TV and a stun-

ningly detailed, high definition image with

absence of visible scanlines and motion artifacts.

WMA Files: WMA (Windows Media^®Audio) is

an audio compression format that was devel-

oped by the Microsoft^®Corporation for use with

its Windows Media Player. WMA files can be

even smaller in size than MP3 files, while main-

taining similar quality. The DMC 1000 is among

those DVD players capable of playing discs con-

taining WMA files. Note that Windows Media

Player uses other file formats; however, the DMC

1000 is only capable of playing files that end in

the “.wma” extension. See page 27 for more

information on WMA file support.

Reading: This is a message that you will see

after you´ve loaded the disc and the tray has

closed. It refers to the fact that the player must

first examine the contents of the disc to see if it

is a CD or DVD, and then extract the information

about the type of material on the disc, such as

languages, aspect ratios, subtitles, number of

titles and more. The slight delay while the

contents of the disc are read is normal.

Resume: The operation of the Stop Button on

the DVD works differently from what you are

used to on CD players. On a traditional CD

player, when you press the Stop button, the unit

does just that: it stops playback. On a CD player,

when you press the start button again, the disc

starts from the beginning. With the DVD,

however, you have two options when playing

DVD discs. Pressing Stop once will stop play-

back, but it actually puts the unit in the Resume

mode. This means that you can turn the machine

off and, when you press play the next time, the

disc will resume or continue from the point on

the disc where the Stop button was pressed. This

is helpful if you are watching a movie and must

interrupt your viewing session but wish to pick

up where you left off. Pressing the Stop button

twice will stop the machine in a traditional

manner and, when the disc is played again, it

will start from the beginning.

In resume mode, the cover of the DVD will be

displayed, if available. Otherwise, the

Harman Kardon screen will appear.

TERMINOLOGY 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Features

Memory Cards

High quality video

• High Definition Multimedia Interface (HDMI)

for a single wire, digital connection to your

HD-Ready screen.

• Advanced sophisticated 10-bit MPEG-2 video

decoding circuits.

• Direct RGB output via SCART (selectable) for

optimum video performance. SCART connector

also configurable for Composite Video output.

• Pure PAL with NTSC disc due to true NTSC/PAL

conversion.

• Dual-layer compatibility for extended play DVD.

• Progressive Scan component video ouputs

(NTSC and PAL)

Compatible with CD

as well as DVD

• The DMC 1000 will play any conventional Audio

CD or recordable (CD-R) or erasable CD

(CD-RW), MP3, WMA (v9) or any VCD or

DVD/Video with the region code 0 or 2.

• Slot 1 accepts Secure Digital (SD), Multimedia

Card (MMC) and Memory Stick (compatible

with Magic Gate) cards. Other card types may

be used with a compatible adapter, but are not

guaranteed to be recognized by the DMC

1000.

• Slot 2 accepts Compact Flash I (CF) cards, or

cards using a Compact Flash 1-compatible

adapter.

• Cards with more than 1GB memory may not

work correctly.

• Video formats supported: MPEG-2 digital video

files.

Disc formats supported

by this player

The unit can play the following disc formats

(8 cm and 12 cm size):

• DVD

• DVD-R

• DVD-RW

• DVD+R

• DVD+RW

• CD

• CD-R

• CD-RW

• VCD

Recording Capabilities

• Automatically records audio CDs to Media

Library (hard-disc drive)

• Recording sources: Media Library, disc player,

memory cards, USB device, analog audio via

rear-panel Auxiliary Analog Audio Inputs

• Recording destinations:

• Playback of JPEG image files

High quality digital audio

• By connecting a DTS (Digital Theater Systems)

or a Dolby Digital decoder, you can enjoy high

quality 5.1 digital surround sound from DTS or

Dolby Digital discs.

• With linear PCM audio at 16-24 bits and

44-96 kHz (also on digital output, see table

page 16), audio quality exceeding that of CD

becomes possible.

I Media Library (from any source)

• WMA (v9)

I Data CD-R/RW disc, Memory Card installed

in Card Slot 1 or 2 or USB device (only from

playlist programmed in Media Library)

• Recording speeds: CDs: 16x, AUX: 1x only

• Recording quality: lossless (.wav), best (MP3:

320kb/sec), high (MP3: 256kb/sec), medium

(MP3: 192kb/sec), basic (MP3: 128kb/sec)

• Recorded format: data files – original format;

analog audio – .wav files; audio CDs – format

and sampling rate determined by recording

quality setting

NOTE: Due to differences in the format of

certain discs, it is possible that some discs may

include a mix of features that are not compatible

with the DMC 1000. Similarly, although the

DMC 1000 is capable of a wide range of fea-

tures, not all discs include every capability of the

DMC 1000 system. For example, although the

DMC 1000 is compatible with multi-angle discs,

that feature is only possible when the disc is

specially encoded for multipleangle play. In

addition, the DMC 1000 is capable of playing

back both Dolby Digital and DTS soundtracks, but

the number and types of tracks available will vary

from disc to disc. To make certain that a specific

feature or soundtrack option is available, please

check the options noted on the disc jacket.

• Optical and coaxial digital audio output.

Inputs

• Memory Card Slot 1: SD/MMC, Memory Stick

• Memory Card Slot 2: Compact Flash

• USB: Flash drive, client devices only

• Analog Audio: 2-channel

• Remote Control IR

Outputs

• Analog Audio:

Zone 1 (main zone): 6-channel (RCA jacks)

Zones 2, 3 and 4: 2-channels per zone

(RCA jacks)

Many convenient features

• On-Screen Menu lcons for disc information or

player information and access to many major

functions of this unit.

• Subtitles may be displayed in one of numerous

languages*.

• The multi-angle function allows you to choose

the viewing angle of scenes which were shot

from a number of different angles (Limited to

DVD’s recorded with multiple camera angles.)

• Multiple options for dialog language and

soundtrack selection (limited to DVD’s recorded

with multiple dialog languages or sound-

tracks).

• Remote Control IR

• Digital audio: Coaxial and optical

• Digital Audio/Video: HDMI

• Analog Video: Composite, S-video and

component, Scart (RGB)

Data and Control Ports

• Front- and rear-panel USB jacks for flash drives

and external USB hard drives (client only, FAT

or FAT32 formats only)

• Proprietary connection for iPod charging,

audio* playback and navigation through

Harman Kardon’s The Bridge (sold separately)

• RS-232 port for bidirectional system control

• RJ45 Ethernet jack for connection to broad-

band network (required for cover art)

• Remote control IR input and output

*Requires compatible iPod.

• Intuitive menu operating system.

• 4 step Zoom (off, x1, x2, x3) play and pause.

• Still-image rotation in 90-degree increments

• Thumbnail still-image menu

• User-selectable slideshow pace: slow,medium,

fast

• Backlit, ergonomically designed remote control.

• Future software upgrades accessible via

Internet. (See information below.)

* The number of languages recorded depends on

the software.

6 FEATURES

Download from Www.Somanuals.com. All Manuals Search And Download.

Features

I Playback capability for CD-R, CD-RW, WMA,

JPEG, MP3, VCD/SVCD, DVD-R, DVD+R, DVD-

RW and DVD+RW discs may vary due to

variations in the quality of the disc and the

recorder used to create the disc.

USB Device Compatibility

Memory Card Compatibility

The following types of memory cards may be

used with the DMC 1000:

Client USB devices, such as flash drives and most

external or some portable hard disc drives, may

be connected to the DMC 1000’s front or rear

panel's USB port.

I The DMC 1000 is compatible with most discs

recorded with files encoded using MP3 or

Windows Media 8, as well as JPEG still

Many recent-model still cameras may also be

connected directly to the DMC 1000 via USB. In

general, cameras or other USB devices that are

compatible with both Windows® and Macintosh

OS computers may also be used with the DMC

1000.

The DMC 1000 will play most recordable memo-

ry cards, but we cannot guarantee complete

playback compatibility due to the wide variation

in recorders and blank media.We cannot

guarantee playback compatibility with cards

having a memory capacity greater than

1 gigabyte.

images. However, note that variations in the

encoder or codec used and the bit rate of the

encoding may affect the DMC 1000’s ability to

play back a specific disc. As a result, we

cannot guarantee complete compatibility with

all encoders and versions of the codecs. For

best results, we recommend that MP3 files be

encoded at bit rates ranging between 32kbps

and 320kbps. WMA files should be encoded at

bit rates between 64kbps and 320kbps.

Although the DMC 1000 is capable of playing

some WMA 9 files, not all features of

Do not connect a personal computer directly to

the DMC 1000. Due to their software design, the

iPod, most other USB peripheral devices and

accessories – such as card readers, keyboards

and pointing devices – and software-specific dig-

ital media players are not compatible with the

USB ports on the DMC 1000, even when placed

in disc mode. To enjoy audio materials stored on

your compatible iPod, dock it in The Bridge

(optional, and available from your Harman

Kardon dealer).

• Both Secure Digital (SD) and MMC (Multimedia

Card) memory cards may be used in Card Slot

1. The smaller miniSD and microSD cards may

be used in Card Slot 1, but require an adapter

(not included).

version 9 are supported. JPEG files should

contain no more than 5 megapixels, and the

file size should be no larger than 5Mb.

• Memory Stick cards may also be used in Card

Slot 1. Original Memory Stick cards are

compatible as is, but an adapter (not included)

is required for the smaller Memory Stick Duo

cards.

Gently insert the connector end of your USB

device into the USB Port, being careful to align

the device’s plastic tongue to slide into the gap

underneath the port’s plastic tongue. Remove the

device by pulling it out of the port.

The DMC 1000 will NOT play the

following:

• DVD discs with a Region Code other than 2

• DVD-ROM data discs

• DVD-RAM discs

• DVD-Audio discs

• xD-Picture Card may be used in Card Slot 1.

• Compact Flash I cards may be used in Card

Slot 2. Compact Flash II cards and microdrives

are not compatible with the DMC 1000.

Upgradeability via Internet

The ”firmware” controlling the functionality of

the Harman Kardon DMC 1000 is fully

upgradeable. In the event of future

improvements to its operations and features, it

will be possible to download firmware upgrades

from www.harmankardon.com/International/

All you have to do is create a CD-R with the data

and insert it in the DMC 1000 for an automatic

upgrade.

• SACD(TM)-discs

• CD-I discs

• CD-G discs

• SVCD discs

• Card Slot 1 accepts only SD, MMC and Memory

Stick cards. Card Slot 2 accepts only Compact

Flash I cards. Do not attempt to install a card in

a slot other than the one designated for its

card type.

• Kodak Photo CD^™discs (Kodak Picture CD

discs, available to consumers, may be viewed

using the DMC 1000).

• Cards with memory capacity greater than

8 gigabyte are not recommended for use with

the DMC 1000.

• Discs intended for use in video game consoles.

• Discs recorded in the “VR” mode or at any

speed other than “SP”.

Card Slot 1

• High-definition optical discs such as WMVHD,

HD-DVD and Blu-ray.

Packing List

Gently insert an SD, MMC or Memory Stick card,

label-side up, pushing it all the way in until it

clicks. Remove the card by gently pressing it in

again until it unlatches, then you may pull it out

of the slot.

1 Harman Kardon DMC 1000 Player

1 Remote control

2 AAA batteries

1 HDMI cable

Card Slot 2

1 owner's manual

1 Power cord.

Gently insert a Compact Flash I card, label-side

up, pushing it all the way until it is firmly seated

in the slot. Remove the card by pulling it out of

the slot.

FEATURES 7

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Controls

ꢀ

Main Information Display

Power On/Off (Standby)

Open/Close

Disc Drawer

Play/Pause

Skip/Search (Previous)

Skip/Search (Next)

Record

Navigation Buttons

Front Panel Door

Card Slot 1

Card Slot 2

USB Port

Remote IR Sensor

Stop

IMPORTANT NOTE: The DMC 1000’s front-

panel controls use advanced touch-sensitive

technology. To use the front panel, place a finger

over any of the illuminated icons. A gentle tap is

all that is necessary. Wait a few seconds for the

DMC 1000 to process each command. To

remove fingerprints, wipe the front panel with a

dry microfiber cloth.

Main Information Display: This display

7Skip/Search (Next): Press to move forward

delivers messages and status indications to help

you operate the DMC 1000 player.

through the music tracks on a CD or the

chapters on a DVD disc. Keep the button pressed

to search forwards at one of the available

speeds.

Power On/Off (Standby): Press the button

once to turn the DMC 1000 player on, press it

again to put the unit in the Standby mode.

Record: When an audio CD is loaded, or the

Analog Audio Inputs are selected as the source,

press this button to view the Record tab of the

on-screen menu. Pressing this button does not

begin the recording.

Open/Close: Press this button to open or

close the Disc Tray.

Power: When the DMC 1000 is connected to

an AC power source and the rear-panel Master

Power Switch is on, this control will indicate one

of four power states:

Disc Drawer.

Play/Pause: Press to initiate playback or to

NOTE: It is not possible to record from one of

the memory cards or the USB device to any

other media or to the USB device. It is also not

possible to transfer image or video files.

However, an audio signal is always available at

the Analog Audio Outputs. You may make ana-

log recordings from any source by connecting an

analog audio recorder to the rear-panel Analog

Audio Outputs.

resume playback after Pause has been pressed.

Press this button to momentarily pause play-

back. To resume playback, press the button

again. If a DVD is playing, action will freeze and

a still picture will be displayed when the button

is pressed.

• Full-Off Mode (dim blue) – The DMC

1000, including its hard-disc drive, is fully

powered down.

• Sleep (Standby) Mode (amber) – The

DMC 1000 will not respond to any commands

other than to power on.

Stop: Press this button once to place the

disc in the Resume mode, which means that

playback will stop, but as long as the tray is not

opened or the disc changed, DVD playback will

continue from the same point on the disc when

the Play Button is pressed again. Resume will

also work if the unit was turned off. To stop a

disc and have play start from the beginning,

press the button twice.

• Server Mode (amber) – The DMC 1000

may be controlled via the RS-232 Port or the

Network Connection, but the on-screen menu

system is off.

Menu: Press to activate the on-screen

menu system, or to navigate back up one level

in the menu system.

NOTE: It is not possible to select a new source

while the current source is playing or even while

it is paused. Press the Stop Button before select-

ing a new source.

• Full-Power Mode (bright blue) – The DMC

1000 operates normally.

The description of each mode and the DMC

1000’s response to the power controls is shown

in Table A7 in the Appendix.

Skip/Search (Previous): Press this button

to move backward through the music tracks on

a CD disc or the chapters on a DVD disc. Keep

the button pressed to search backwards at one

of the available speeds.

8 FRONT PANEL CONTROLS

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Controls

Navigation and Enter Buttons: Use

these buttons to navigate the on-screen menus,

and press the Enter Button to select an item.

Front-Panel Door: Open this door to

access the two Card Slots and the front-panel

USB Port. To open it, gently press on the triangle

in the center of the door until it unlatches; the

door will drop down. To close the door, remove

all media, then press the door closed at the

same center location until you hear the latch

click. To avoid damaging the door, do not open

or close it by grabbing the edges.

Card Slot 1: Insert an SD, MMC or Memory

Stick memory card into this slot by gently

pushing it all the way in until it clicks. The slot

also accommodates miniSD, microSD and

Memory Stick Duo cards when used with the

appropriate adapter, available in most

electronics and computer stores. Remove a card

from this slot by gently pushing it in until it

unlatches, then pulling it all the way out of the

slot.

Card Slot 2: Insert a Compact Flash I

memory card into this slot by gently pushing it

all the way in until it is firmly seated in the slot.

Remove it by pulling it all the way out of the

slot.

USB Port: Insert a USB client device’s

connector into this port, being careful to

correctly align the device’s plastic tongue with

the gap. Do not connect a computer to this port.

Remote IR Sensor: This sensor receives

infrared commands from the remote control.

Make sure that it is not blocked, although an

optional IR sensor such as the Harman Kardon

HE 1000 may be connected to serve as an exter-

nal sensor when the unit is located in a different

room, installed behind cabinet doors or when

the sensor is otherwise blocked. For best results,

always point your remote control at the DMC

1000’s front panel.

FRONT PANEL CONTROLS 9

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Information Display

K C

G N

M J N

H P

DMC

DVD

SVCD USB 1 USB 2 CARD 1 CARD 2

AUX

LAN

RAND REP 1A-BALL

SEC

420ip 720ip 1080ip TITLE V.OFF TRACK CHAP DOLBY DTS

HOUR

MIN

F G

A Source/Disc Type Indicators

B Playback-Mode Indicators

C Audio Bitstream Indicators

D Chapter/Track Number Indicators

E Time Indicators

G V-OFF Indicator

H Repeat Indicators

I Message Area

J Random Indicator

K Network

M Angle Indicator

N Parental Lock Indicator

F Title Indicators

L Video Output Indicators

A Source Indicators: One of the Disc-Type

Indicators DMC [the Media Library], DVD, VCD,

USB 1 [front], USB 2 [back], Card 1 [SD, MMC,

Memory Stick, xD-Picture Card], Card 2 [CF],

The Bridge or AUX will light to indicate the cur-

rent media source. During a recording both the

source and destination media indicators will

light.

D Chapter/Track Number Indicators: When

a DVD disc is playing, these two positions in the

display will show the current chapter. When a

CD disc is playing they will show the current

track number.

NOTE: The Video Off command will not affect

the HDMI Output because it may be in use for

audio. Avoid leaving the SETUP MENU on screen

for longer than a minute or two when using the

HDMI Output, as the screen saver will not oper-

ate on the SETUP MENUS and there is a danger

of “burning in” the image on plasma or CRT dis-

plays.

E Time Indicators: These positions in the

indicator will show the running time of a DVD in

play. When a CD is playing, these indicators will

show the current track time, time remaining in

the current track, or the total remaining time on

the disc.

Disc-Type Indicators: The DVD, CD, VCD or

SVCD indicator will light to show the type of disc

currently being played.

H Repeat Indicators: These indicators light

when any of the Repeat functions are in use.

I Message Area: Various messages appear in

this two-line area. During media playback, the

track count and time are displayed on the upper

line, while identifying information scrolls on the

lower line, depending on the media type.

B Playback-Mode Indicators: These

indicators light to show the current playback

mode:

NOTE: The Indicators DEF will also display

text messages about the DVD’s status, including

LOADING when a disc is loading,

POWER OFF when the unit is turned off, and

DISC ERROR when a disc not compatible

with the DVD is put into the play position.

Lights when a disc is playing in the normal

mode

J Random Indicator: This indicator lights

when the unit is in the Random Play mode.

Lights when the disc is in the Fast Search

Forward mode. The on-screen banner display

indicates the selected speed (x2, x4, x8, x16)

F Title Indicators: These two positions in the

display will show the current title number when

a DVD disc is playing.

K Network: This indicator lights when the

RJ45 jack is connected to a live network.

Lights when the disc is paused.

G V-OFF Indicator: This indicator lights when

the unit's video output has been turned off by

pressing the V-OFF button on the remote

control.

Lights when the disc is in the Fast Search

Reverse mode. The on-screen banner display

indicates the selected speed (x2, x4, x8, x16)

C Audio Bitstream Indicators: When a

Dolby^®Digital, DTS^®or linear PCM digital audio

signal is present on the disc, one of these

indicators will light.

10 FRONT PANEL INFORMATION DISPLAY

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Information Display

L Video Output Indicators: Either the 576i

or 576p indicator will light to indicate whether

the Component Video Outputs are in progressive

scan mode. When the Composite or S-Video

Outputs are in use, this indicator will always

indicate the default 576i (interlaced scan) set-

ting, even if you attempt to change the Output

Resolution setting in the Video Setup menu to a

higher video resolution. When the HDMI Output

is in use, its video resolution will be indicated.

The HDMI Output will upscale source materials

to the higher resolution, as indicated in the

VIDEO SETUP menu (explained in the Initial

Setup section). You may change the Video Out

Resolution setting to a lower resolution to

improve picture quality using the VIDEO SETUP

menu. As you select a specific HDMI Output

video resolution and the DMC 1000 successfully

determines that the video display is capable of

handling that resolution, its indicator will light

and will appear briefly in the Message Display

and on screen.

M Angle Indicator: This indicator blinks when

alternative viewing angles are available on the

DVD currently playing.

N Parental Lock Indicator: This indicator

lights when the parental-lock system is engaged

in order to prevent anyone from changing the

rating level without a code.

FRONT PANEL INFORMATION DISPLAY 11

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control Functions

POWER ON

POWER OFF

SUBTITLE

TITLE

ANGLE

AUDIO

ENTER

OPEN/CLOSE

SETUP

ARROWS

INFO

DISC MENU

PAUSE

STATUS

SKIP/STEP (PREVIOUS)

SKIP/STEP (NEXT)

PLAY

SEARCH/SLOW REVERSE

STOP

SEARCH/SLOW FORWARD

DIMMER

BACK

ZOOM

FIND

A-B Repeat

V.OFF

LIGHT

NUMERIC KEYS

PLAY MODE

CLEAR

IR EMITTER

VIDEO MODE

RECORD

POWER ON: Turns on the player when it is

TITLE: When a disc is playing, press to

SETUP: Press this button to use the

in standby mode (Harman Kardon logo appears

on screen).

make the player go back to the first section of

the disc.

DMC 1000’s on-screen menu system to adjust

the player’s configuration settings.

POWER OFF: Turns off the player to stand-

ANGLE: Press to access various camera

ARROW buttons (

N/K/L): Use to

by mode.

angles on a DVD (If the DVD contains multiple

camera angles) or to rotate JPEG images.

move the cursor in the OSD. When the Zoom

function is used with still images, use these but-

tons to explore the enlarged image. While view-

SUBTITLE: When a DVD is playing, press to

select a subtitle language or to turn subtitles off.

AUDIO: Press to access various audio

ing a still image, press the

the image 90º clockwise, or the

rotate it 90º counterclockwise.

Button to rotate

Button to

languages on a DVD (If the DVD contains

multiple audio streams).

Note: Due to the variations in how DVD discs

are authored, the subtitle languages displayed

by the DMC 1000 may not accurately reflect the

actual languages available on the disc. It is

recommended that subtitles be selected using

the disc’s menu.

ENTER: Press this button to activate a

INFO: Press for detailed informations on

setting or option

the disc playing

OPEN/CLOSE: Press to open or close the

disc tray.

12 REMOTE CONTROL FUNCTIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control Functions

DISC MENU: Displays the actual DVD Disc

Menu: Press to display the main menu for

IR EMITTER: This small, clear button-like

Menu on the TV screen in play mode. When

playing discs with JPEG images, pressing this

button will access the thumbnails.

media playback and control.

device sends the IR commands from the remote

control to the DMC 1000. To ensure proper

performance of the remote control, be sure to

point it toward the unit and do not cover it with

your fingers when sending remote commands.

Find: When browsing content from the

Media Library, press to search for any audio

track stored on the system’s hard-disc drive.

When the Find Track box opens, use the Numeric

Keys to enter the name of the desired track (see

Numeric Keys description). When a DVD is play-

ing, press this button to display a dialog box

that allows you to directly select a group, title,

track or chapter as appropriate to the disc. With

the correct cell in the dialog box highlighted, use

the Numeric Keys to enter the section of the disc

from which you would like playback to begin (it

is not necessary to press the Enter Button). The

disc will automatically jump to that section. You

may also use the function to begin playback

from a specific time point in the track, chapter or

file, or on the disc (DVDs and CDs), sometimes

called Time Search. With the Time cell

PAUSE: Freezes a picture (with DVD/VCD)

and pauses the playback signal (CD) when a disc

is playing. Press again for normal playback.

Video Mode: Press to cycle through the

available video output settings. If you inadver-

tently change the video setting in the on-screen

menu system and the picture is lost or scram-

bled, press this button to return to a setting

compatible with your video display.

STATUS: Press while a disc is playing to

view banner display. Use the ARROW buttons to

move through the different features in the

Banner Display.

SKIP/STEP (Previous): Press to go to

Record: Press this button to open a menu

beginning of current track. Press again quickly to

go to beginning of previous track. After pressing

the PAUSE button, each press of this button will

move the image in reverse frame by frame.

that allows you to record content from one

media source to another.

• Audio CDs are automatically recorded to the

Media Library when they are inserted.

• Audio sources connected to the Auxiliary

Analog Audio Inputs may only be recorded to

the Media Library. You may later transfer that

content from a playlist to a memory card, a

recordable CD or a USB drive.

• To copy recordings from the Media Library to a

memory card, a USB drive or a CD-R/RW disc,

first create a playlist of the desired content. If

the content was originally imported to

the Media Library from a memory card or USB

device, the DMC 1000 automatically created a

playlist at that time.

• When using the pull-down menus to select a

recording source (“From”) and a destination

(“To”) only those sources with available con-

tent will appear. The Auxiliary Analog Audio

Inputs will always appear, because the DMC

1000 is not capable of detecting the presence

of an audio signal.

SKIP/STEP (Next): Press to go to begin-

ning of next track. After pressing the PAUSE

button, each press of this button will move the

image forwards frame by frame.

highlighted, use the Numeric Keys to enter up to

six digits that indicate the time from which you

would like playback to start. If you enter fewer

than six digits, press the Enter Button to

complete the entry, and the disc will immediately

jump to that point.

PLAY: Begins to play disc (closes disc tray

first, if it is open.)

SEARCH/SLOW (REV): Allows you to

search in reverse through a disc while it is in

play mode. Each time you press this button, the

search speed changes as indicated by a number

of arrows on the right top of your screen.

After pressing the PAUSE button, each press of

this button will change the slow down speed

indicated by a number of arrows in the right top

of the screen.

A-B: Press to select section A-B and to play

repeatedly.

V.OFF: Press to turn off video output for

improved performance from audio-only discs.

Press again to restore video output.

LIGHT: Press to illuminate remote

controller.

STOP: Stops playing a disc. When a disc is

playing, if you press STOP and PLAY, the disc will

resume play, i.e. it will start from the same point

on the disc where the unit was stopped. If you

press STOP twice and the PLAY button, the disc

will start play from the beginning.

NUMERIC KEYS: Select numbers by

pressing these buttons. While managing the

Media Library, these buttons may also be used

to enter letters and punctuation when naming

playlists or content. A character-entry dialog box

will appear to guide you, as shown in Figure 35

SEARCH/SLOW (FWD): Allows you to

on page 28. You may use the

N/K/L

search forward through a disc while it is in play

mode. Each time you press this button, the

search speed changes as indicated by a number

of arrows on the right top of your screen.

After pressing the PAUSE button, each press of

this button will change the slow down speed as

indicated by a number of arrows in the right top

of the screen.

Navigation Buttons to highlight the desired

character key and press the Enter Button repeat-

edly until the desired character is displayed in

the text bar at the top of the character-entry dia-

log box. You may find it easier to press the corre-

sponding Numeric Key to directly select charac-

ters. Each press of a Numeric Key cycles through

the upper- and lowercase letters or symbols

shown on the remote and on screen.

DIMMER: Press to change the brightness

of the front panel display or to turn the display

off completely in the following order: FULL

BRIGHTNESS Í HALF BRIGHTNESS Í OFF Í FULL

BRIGHTNESS

Use the alphabetic keys to jump to desired areas

of the Media Library content. Example: While

displaying the Media Library organized by artist,

press any letter key to jump to the first artist

whose name begins with that letter.

BACK: Press this button while viewing the

DMC 1000’s Setup menus or Status Display to

exit a drop down menu without making a

selection. It has no effect on a disc’s menus.

Play Mode: Press this button while a disc

is playing to display the Play Mode dialog box,

which allows you to program Random or Repeat

playback and play lists.

ZOOM: When a DVD or VCD is playing,

press this button to zoom the picture so that it is

enlarged. There are 4 steps to the zoom

function, each progressively larger. Press through

each of the zoom stages to return to a normal

picture.

CLEAR: Press to remove the Banner menu

from the screen.

REMOTE CONTROL FUNCTIONS 13

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel Connections

C 8

Manufactured under license under U.S.

Patent #’s: 5,451,942; 5,956,674; 5,974,380;

5,978,762; 6,487,535

worldwide patents issued

is registered trademark

other U.S. and

pending. DTS

the DTS logos

and Symbol are trademarks of DTS, Inc.

A 4

0 6

D F E 7 ꢀ

Optical Digital Output

Coaxial Digital Output

AC Power Cord

Composite Video Output

S-Video Output

Remote Control Output

Remote Control Input

Zone 2/3/4 Analog Audio Outputs

HDMI Output

Zone 1 Analog Audio Outputs

Analog Audio Input

ꢀ

Network Jack

USB Port

RS-232 Port

Master Power Switch

Fan Vent

Component Video Outputs

Scart TV Output

The Bridge Connection

Optical Digital Output: Connect this jack

Component Video Outputs: These out-

8Remote Control Input: Connect the

to the optical digital input of an A/V receiver or

surround processor for Dolby Digital, DTS or

PCM audio playback.

puts carry the component video signals for

connection to display monitors with component

video inputs. For standard analog TV's or

output of a remote infrared sensor, or the

remote control output of another compatible

Harman Kardon product, to this jack. This will

enable the remote control to operate even when

the front panel Remote Sensor on the

DMC 1000 is blocked. This jack may also be

used with compatible IR remote control-based

automation systems.

projectors with inputs marked Y/Pr/Pb or

Coaxial Digital Output: Connect this jack

Y/Cr/Cb, connect these outputs to the correspon-

ding inputs. If you have a high-definition televi-

sion or projector that is compatible with high

scan rate progressive video, connect these jacks

to the “HD Component” inputs. Note that if you

are using a progressive scan display device, then

”Progressive” must be selected in the Video

Set-up Menu in order to take advantage of the

progressive scan circuitry. See page 22 for more

information on progressive scan video.

to the coaxial digital input of an A/V receiver or

surround processor for Dolby Digital, DTS or

PCM audio playback.

NOTE: The coaxial digital output should only be

connected to a digital input. Even though it is

the same RCA-type connector as standard

analog audio connections, DO NOT connect it to

a conventional analog input jack.

Zone 2/3/4 Analog Audio Outputs:

When the DMC 1000 is being used for multi-

zone operation, connect these jacks to the sepa-

rate Zone inputs on your multiroom controller or

hub, or the amplifiers feeding the multizone sys-

tem.

Connect either the Optical Digital Audio

Output

or the Coaxial Digital Audio

to a corresponding digital audio

IMPORTANT: These jacks should NOT be

connected to standard composite video inputs.

HDMI Output: If you have an HDMI-com-

patible receiver or video display device, connect

this output to an HDMI input on the receiver or

video display for the highest-quality uncom-

pressed digital audio and video available. Even if

your receiver is not capable of processing audio

in the HDMI format, you may still experience the

superb reproduction of HDMI video.

input on your receiver or processor, but not both.

SCART OUT (TV): If your TV has a SCART

AC Power Cord: Connect this plug to an

socket, you can connect a SCART cable to your

TV and to your DMC 1000 Player for improved

video quality. The SCART cable carries both

audio and video. You can select Composite Video

or RGB video for that SCART connector’s video

output signal.

AC outlet. If the outlet is controlled by a switch,

make certain that it is in the ON position.

Composite Video Output: Connect this

jack to the video input on a television or video

projector, or to a video input on an A/V receiver

or processor if you are using that type of device

for video input switching.

If your video display has a DVI input, you may

use an optional HDMI-to-DVI cable or adapter

for the connection to the display. In all cases, the

video display must be HDCP-compliant in order

to use the HDMI output. For best results, we do

not recommend HDMI connections in excess of 3

meters..

Remote Control Output: Connect this

jack to the infrared (IR) input jack of another

compatible Harman Kardon remote controlled

product to have the built-in Remote Sensor on

the DMC 1000 provide IR signals to other com-

patible products.

S-Video Output: Connect this jack to the

S-Video input on a television or video projector,

or to an S-Video input on an A/V receiver or

processor if you are using that type of device for

S-Video input switching.

The following audio formats may be output via

the HDMI connection:

Audio CD – 2-Channel PCM or 5.1-channel DTS

DVD-Video – Up to 5.1-channel Dolby Digital or

DTS

14 REAR PANEL CONNECTIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

Zone 1 Analog Audio Outputs: If you are

not using either HDMI or a separate optical or

coaxial digital audio connection for the Zone 1

(Main Room) audio, connect these jacks to the

matching inputs on your A/V receiver or sur-

round processor. Connect the left- and right-

channel jacks to the receiver to monitor an ana-

log source connected to the Auxiliary Inputs dur-

ing recording.

Note: You’ll find more details about all

Audio/Video connections under Setup and

Connections on the following pages.

Analog Audio Inputs: Connect these jacks

to an audio output on a source player like a tape

deck or record player for analog audio recording.

The Bridge Connection: To use an iPod*

as a source for the DMC 1000, enabling you to

select and listen to audio content and charge

the iPod, connect an optional Harman Kardon

The Bridge here.

*For iPod models with a dock connector.

Network Jack: Connect this standard RJ45

jack to a broadband network (Ethernet) connec-

tion so that you may take full advantage of

Gracenote MusicID, including obtaining cover art

for stored albums, updating both the database

of album information and the system software,

and connecting the DMC 1000 to a home net-

work. When the network connection is “live,”

the lights on either side of the jack will flash to

indicate network activity.

USB Port: This USB port is primarily intend-

ed to connect an optional, external USB hard

drive to back up the DMC 1000’s Media Library,

although it may be used for content playback.

DO NOT connect a computer or other host

device directly to the DMC 1000.

ꢀ

RS-232 Port: Connect the DMC 1000 to

compatible system control and automation prod-

ucts, using a standard RS-232 cable. As pro-

gramming a control and automation system is a

complex task, requiring specific information and

training, we recommend that you consult a

trained installer.

Master Power Switch: Push this switch

to the line position (I) to apply power to the

DMC 1000, placing it in the “Full-Off” power

mode. When the unit will not be used for an

extended period of time, or whenever it is neces-

sary to remove the unit from the AC power lines,

push the switch to the circle position (0) to turn

the unit off.

Fan Vent: This area contains vents used by

the DMC 1000’s fans to cool the system.

Maintain a clearance of at least three inches to

the nearest surface, to avoid overheating the

unit.

REAR PANEL CONNECTIONS 15

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup and Connections

Before connecting your DMC 1000,

please:

I Ensure that the power switch of this unit and

other equipment to be connected is set to off

before commencing connection.

STEP THREE – Connect Media Sources

• Auxiliary Analog Audio Inputs : Connect the

line-level or “Tape” outputs of an analog

device to these inputs. Do not connect a

turntable without a phono preamp. Contact

the Harman Kardon Parts Department to pur-

chase one.

STEP SEVEN – Plug In AC Power

To avoid possible damage from a transient

power surge at plug-in, switch the Master Power

Switch to the circle position (0). Plug the female

end of the AC Power cord into the receptacle,

and the male end into an unswitched AC outlet.

Due to the DMC 1000’s power requirements, do

not plug it into an accessory outlet on another

component.

I Do not block ventilation holes of any of the

equipment and arrange them so that air can

circulate freely.

• The Bridge

: Connect Harman Kardon’s The

Bridge (sold separately) here to enjoy content

stored on a compatible iPod (not included).

I Read through the instructions before

connecting other equipment.

Connecting to a TV Only (Optional)

When using the DMC 1000 with a television but

no audio receiver or processor, connect it as

follows. Make the Analog Audio Connection

• USB Devices EF: Connect a compatible USB

client device to either the front- or rear-panel

USB Port. The front-panel port is located

behind the dropdown door.

I Ensure that you observe the color coding

when connecting audio and video cables.

STEP ONE – Placement

and one of the Video Connections

STEP FOUR – Connect the DMC 1000 to a

Multizone System (Optional)

(Composite Video

Component Video

, S-Video

Due to the heat generated by other system com-

ponents, place the DMC 1000 on its own shelf

rather than stacking it directly on another com-

ponent. We do not recommend stacking other

components on top of the DMC 1000.

5). If your television or

video display is HDMI-capable, you only need to

make the HDMI connection, as it handles

The DMC 1000 may be used with up to four

zones simultaneously, with any or all zones

linked to each other. Zones 2, 3 and 4 are used

to distribute 2-channel audio to other locations.

Zone BC1 is the main listening area. The sys-

tem may be controlled remotely using the

Remote IR Input, the RS-232 Port or a network

connection.

both audio and video. Remember to plug in the

power cord.

STEP TWO – Connect the DMC 1000

to an A/V Receiver or Processor

(Preferred)

If the receiver is HDMI-capable and HDCP-com-

Connect the Analog Audio Outputs for each

zone in the system to a receiver, processor, multi-

zone controller or amplifier.

pliant, connect the HDMI Output

to the

receiver’s HDMI Input to carry both audio and

video.

Connect the RS-232 Port

ꢀ

to a compatible

If the receiver has only a DVI input, use an

HDMI-to-DVI adapter, and make a separate

audio connection.

control device using a standard null modem

cable or adapter.

STEP FIVE – Connect the Remote IR Input

and Output

If the receiver does not have an HDMI or DVI

input, select one video connection, in order of

Connect the DMC 1000’s Remote IR Input

preference: component video

composite video

, S-video

to the compatible IR output of another product,

or to an IR receiver or controller, such as the

optional Harman Kardon HE 1000. When daisy-

chaining devices to allow for remote control up

and down the chain, connect the Remote IR

For non-HDMI products, a separate audio conne-

ction is also required. If available, connect either

the Optical

or Coaxial Digital Audio Output

to the corresponding input on the receiver.

Output

to the next product’s IR input. The

DMC 1000 is compatible with “stripped carrier”

IR signals.

The DMC 1000 is capable of outputting up to

four separate analog audio streams for use in

multizone systems. Zone 1 is used for the main

listening room, and includes six channels.

STEP SIX – Network Connection

Connect the Network Jack

to a router or

Connect the Zone 1 Analog Audio Outputs

Ethernet-compatible controller. The network con-

nection is used by Gracenote MusicID

a receiver that does not have an available digital

audio input. If digital audio connections have

been made to the receiver, make an additional

connection from the FL and FR jacks to the

receiver to monitor an analog source connected

to the Auxiliary Inputs during recording.

to obtain cover art and database updates via the

Internet. When the Network connection is not

used, Gracenote MusicID obtains the tags from a

database stored internally on the DMC 1000’s

hard-disc drive.To use the DMC 1000 as a server

on a home network, use the Setup menu to look

up the settings automatically generated when

the DMC 1000 is booted, and program your

home network devices accordingly.

16 SETUP AND CONNECTIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

Battery installation

Remote control operation range

Insert the batteries supplied while observing the

correct (+) and (–) polarities.

Point the remote control unit from no more than

about 7 m from the remote control sensor and

within about 60 degrees of the front of the unit.

Service life of batteries

I The batteries normally last for about one year,

although this depends on how often, and for

what operations, the remote control is used.

I If the remote control unit fails to work even

when it is operated near the player, replace

the batteries.

I Use size “AAA” batteries.

Notes:

I Do not attempt to recharge, short-circuit,

disassemble, heat or throw the batteries into

fire.

I The operating distance may vary according to

the brightness of the room.

I Do not drop, step on or otherwise impact the

remote control unit. This may damage the

parts or lead to malfunction.

Notes:

I Do not point bright lights at the remote

control sensor.

I Do not mix old and new batteries.

I Wipe away any leakage inside the remote

control unit, and install new batteries.

I Do not place objects between the remote

control unit and the remote control sensor.

I If leakage should come into contact with

parts of your body, wash it off thoroughly

with water.

I Do not use this remote control unit while

simultaneously operating the remote control

unit of any other equipment.

I Batteries contain chemical substances and we

recommend that you dispose of them properly

and in compliance with any local regulations.

Do not simply throw them away but return to

your dealer or special battery disposal centers.

REMOTE CONTROL 17

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Audio Connections

Audio output from the unit’s

optical/coaxial digital audio

output connector

Gently push the cable plug through the built-in

shutter that covers the optical digital audio

output and connect the cable firmly so that the

configurations of both the cable and the

connector match.

For your reference:

Caution for the optical/coaxial

digital audio outputs:

I Dolby Digital (AC-3) is a digital sound

compression technique developed by the

Dolby Laboratories Licensing Corporation,

supporting 5.1-channel surround sound, as

well as stereo (2-channel) sound, this

I When connecting an amplifier (with an

optical/coaxial digital input ) which does not

contain a Dolby Digital (AC-3) or DTS

decoder, be sure to select ”PCM” as initial

setting in the ”Digital Output” menu (see

also page 19).

technique enables a large quantity of sound

data to be efficiently recorded on a disc.

Otherwise, any attempt to play a DVD may

cause such a high level of noise that it may

be harmful to your ears and damage your

speakers.

I Linear PCM is a signal recording format used

in CDs. While CDs are recorded in

44.1kHz/16 bit, DVDs are recorded in

48kHz/16 bit up to 96kHz /24 bit.

Disc

Sound recording

format

Optical/coaxial digital

audio output

DVD

Dolby Digital

Dolby Digital bitstream

(2-5.1ch) or PCM

(2ch, 48kHz, 16-bit)††

I CD’s can be played as they would normally

be played.

I If you have a Dolby Pro Logic Surround

decoder connected to the DVD’s analog

AUDIO OUT connectors, thanks to the

”Downmix” function of the DVD you will

obtain the full benefit of Pro Logic from the

same DVD movies that provide full 5.1-chan-

nel Dolby Digital soundtracks, as well as from

titles encoded with Dolby Surround.

Linear PCM

(48/96kHz,

16/20/24-bit)

Linear PCM (2ch)

(48/96kHz,

16/20/24-bit)

Note:

I Some first generation DTS decoders which do

not support DVD-DTS interface may not work

properly with the DMC 1000 player.

DTS

Bitstream or no

output*

I Dolby Digital, DTS and PCM signals are

MPEG (2.0)

MPEG

passed through the HDMI Output

bitstream (2ch)

or linear PCM

(2ch, 48kHz)

I The DVD is designed to digitally output

96kHz-PCM audio with a 96kHz sampling

rate. However, some 96kHz DVD's may

include copy protection codes that do not

permit digital output. For full 96kHz fidelity

from these discs, use the analog outputs of

the DVD.

Audio materials.

Notes when connecting the

optical digital audio cable

(optional)

I Gently push the cable plug through the

built-in shutter that covers the optical digital

audio output and connect the cable firmly so

that the configurations of both the cable and

the connector match.

VCD

MPEG-1

CD-DA

Linear PCM*

Linear PCM

(44.1kHz sampling)

MP3

MPEG-1

Audio

Linear PCM

IMPORTANT: If your surround processor/D/A

converter does not support 96kHz PCM audio,

you must use the DVD analog outputs for full

96kHz fidelity with these discs.

(44.1–48kHz,

depending on

source, if digital

output format

selected as

“Bitstream”).

(48kHz if digital

output format

selected as

Layer 3)

Dolby Digital and DTS

Both Dolby Digital and DTS are audio formats

used to record 5.1-channel audio signals onto

the digital track of film. Both of these formats

provide six separate channels: left, right, center,

left rear, right rear, and common subwoofer.

The latest 6.1-formats, Dolby Digital EX and

DTS ES, even one (or two) additional "Surround

Back" channel for a center between the rears.

“PCM”)

Linear PCM

(32–48kHz)

WMA

(Windows

Media

Audio)

* Digital Format must be selected as

Remember, that Dolby Digital or DTS will only

play 5.1-channel sound if you’ve connected the

optical or coaxial output of the DMC 1000 play-

er to a DTS or Dolby Digital receiver or decoder

and if the disc was recorded in the Dolby Digital

or DTS format.

“BITSTREAM“ or ”PCM” respectively in Menu

18 DIGITAL AUDIO CONNECTIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback Basics

2. Press PLAY at any time to resume normal

playback.

Basic Play

Preparation

Note that there will be no audio playback during

fast-forward or -reverse play of DVD discs. This is

normal for DVD, as A/V receivers and surround

processors cannot process the digital audio

streams during fast-play modes; audio will be

heard during fast-play of conventional CD’s.

1. Switch the TV ON and select its video input

connected to the DMC 1000.

2. Press POWER to turn on the unit, the

DMC 1000 harman/kardon logo should appear

now on the screen. If that logo appears

distorted on the screen or without any color,

change the appropriate settings at the Video

Setting Submenu according to your TV set and

to the connection used between the DMC

1000 and your TV.

Freeze Frame and Frame Advance

(with DVD only)

1. Press PAUSE when a DVD is playing to freeze

the picture.

2. Each time you press one of the STEP (FWD or

REV) buttons, the picture advances one frame.

3. When you see no video at all, not even the

harman/kardon logo, check the setting of the

video input used on your TV (most SCART

inputs on TVs can be configured in the TV´s

menu). When you don´t succeed, connect your

TV with different cables to the DMC 1000, e.g.

via Composite (yellow jacks) or S-Video cables,

rather than per SCART to view the setup

menus until all appropriate ”Video menu”

settings are made properly.

3. Press PLAY to resume normal playback.

Slow Motion Playback (with DVD only)

1. When a DVD disc is in pause or freeze frame

mode, you may move slowly forward or back-

ward through the program being played at one

of the speeds by pressing the Slow Buttons on

the remote. Each press of the buttons will

move to the next speed, indicated by a number

of arrow indicators on the right top of the

screen.

4. Switch on your A/V system’s power, if the

player has been connected to such a system.

5. Press OPEN/CLOSE to open the disc tray.

6. Place a disc on the disc tray.

2. Press PLAY to resume normal playback.

Note that there will be no audio playback during

slow-forward or -reverse play of DVD discs. This is

normal for DVD, as A/V receivers and surround

processors cannot process the digital audio

streams during slow modes. Slow play is not

available for CD.

Hold the disc without touching either of its

surfaces, position it with the side you wish to play

facing down, align it with the guides, and place it

in its proper position.

I 3" (8 cm) discs or 5" (12 cm) discs can be

Notes: Playback features may not be available

during the opening credits of a movie. This is

intended by the disc author and is not a failure of

the DMC 1000.

used.

7. Press PLAY. The disc tray is automatically closed

and play begins.

I When the disc tray is closed by pressing

OPEN/CLOSE, play will start automatically.

Playback of a DVD with 96kHz/24-bit audio

requires the use of circuitry normally used for

other features. Accordingly, Slow Play Reverse

and Step Advance features are not available with

these discs.

I With most DVD’s, a Disc Menu appears on the

screen. Select specific menu item by using

ARROW buttons on the remote, then press

ENTER.

Depending on the structure of a VCD disc, the

functions Slow Reverse and Step Reverse may be

prohibited or have no function and Fast Playback

(Search) may not function.

Disc Playback Features

Skipping tracks or titles/chapters

To move forward or backward through the tracks

on a CD or the titles or chapters on a DVD, press

skip on the front panel or Previous/Next on the

remote.

Fast Motion Playback/Fast Search

1. To move forward or backward through the

DVD or CD disc being played at fast speed,

press SEARCH on the remote. Once one of

these buttons is pressed, the fast search will

continue until PLAY is pressed.

There are four fast-play speeds. Each press of the

SEARCH Buttons will cycle to the next speed in

the following order: x2, x4, x8, x16, x32,

indicated by a number of arrow indicators on the

right top of the screen.

PLAYBACK BASICS 19

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup

Turn On the DMC 1000

Display the Setup Menu

Media Library Setup

The DMC 1000 has four power states, each

designed to minimize unnecessary power con-

sumption.

The first time the system is used, the Setup Menu

should be configured. After Initial Setup is com-

pleted, unless the user’s requirements change,

it is usually not necessary to revisit the Setup

Menu. Press the Setup Button to display the Setup

Menu (see Figure 3).

The Media Library Setup Menu determines what

action the DMC 1000 takes when an audio disc is

loaded. Any time an audio CD is loaded, it is auto-

matically copied at high speed to the Media

Library. The DMC 1000 does not play audio CDs

directly from the disc; playback is from the Media

Library.

The description of each mode and the DMC

1000’s response to the power controls is shown

in Table A7 in the Appendix.

IMPORTANT NOTE: When the HDMI Output is

used, turn on the system components in reverse

order, starting with the video display, then any

receiver or processor, and finally turn on the DMC

1000.

Audio Disc Insert Preferences: Select Record

Only to copy the disc to the Media Library without

playing it, or Play and Record to begin playback

from the Media Library after recording com-

mences.

The first time the system is used, turn it on as fol-

lows:

Audio Encoding Quality: Select the format to

be used for recording audio CDs to the Media

Library.

Switch the Master Power Switch to the line posi-

tion (I), placing the DMC 1000 in Full-Off power

mode.

• Basic (MP3: 128kb/sec)

• Medium (MP3: 192kb/sec)

• High (MP3: 256kb/sec)

• Best (MP3: 320kb/sec)

• Lossless (.wav)

Figure 3 – Media Library Setup Menu

The “Start DMC 1000” message will appear on

the front panel, and the “Starting . . . ” message

will appear on screen. Allow the system a few

minutes to fully start up.

The Setup Menu, as with all menus on the DMC

1000, is navigated using the F/G/D/E Navigation

Buttons. Press the Enter Button to select an item

highlighted on screen.

The first time the DMC 1000 is turned on, the

End User License Agreement (EULA) will appear.

See Figure 1. The unit will not respond to any

other commands until you have scrolled through

the entire agreement, and accepted its terms. A

copy of the complete EULA appears in the back

of this manual, starting on page 37.

There are six Setup Menus: Media Library, DVD

Player, Audio, Video, General and Advanced.

Figure 1 – End User Agreement

After you have accepted the EULA, the Main

Menu will be displayed.

Figure 2 – Main Menu

The Main Menu is the usual starting point for

each listening or viewing session.

20 SYSTEM SETUP

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup

Preferred Audio Language: Defines your

preferred audio language. Every time a disc is

played that contains this audio language, it will

be activated automatically. If you do not find your

preferred language in the list of options, you can

select your preferred language by highlighting

OTHER. Press ENTER and use the Navigation

Buttons to select your preferred language from

the list shown on the screen. Note that only

those languages will be available that are actual-

ly on the DVD you would like to play.

Dynamic Range Compression: When playing

specially encoded Dolby Digital DVDs, turn on

Dynamic Range Compression to reduce the levels

of louder passages while maintaining the intelli-

gibility of dialog and softer passages. This feature

is useful to avoid disturbing others while watch-

ing action-packed DVDs. This is similar to the

“Night Mode” function on many DVD players

and A/V receivers.

DVD Player Setup

DVD Bass Management: If all six of the Zone

1 Analog Audio Outputs are connected to a

receiver or processor that does not perform bass

management on its 6-channel audio inputs, turn

this setting on and configure the speaker settings

in the Audio Setup menu.

Parental Control: Defines a password used to

control viewing of restricted programs. The five

standard US rating symbols are ”G” (General,

level 2), ”PG” (Parental Guidance, level 4),

”PG13” (Parental Guidance and 13 years old,

level 4), ”R” (Restricted, level 6) and ”NC 17”

(from 17 years old, level 7). The DVD will accom-

modate a total of eight rating steps, as set by the

DVD creators. These additional steps allow for

more critical control of program playback for all

audiences. Level 8: All DVDs can be played. Levels

7 to 2: DVDs for general audiences/ children can

be played. Level 1: DVDs for children can be

played; DVDs for adults/general audiences are

prohibited. Follow the explanations on the screen

to set a new password.

Figure 4

The DVD Player Setup menu (shown in Figure 4)

contains settings that affect DVD playback. The

other media sources are not affected by these

settings.

If the receiver is capable of analog bass manage-

ment, leave this setting in the default Bypass

mode and configure the receiver’s speaker set-

tings. When this setting is off, the DMC 1000

speaker settings will have no effect.

The DMC 1000’s Setup menu screens follow the

same basic format.

Select a menu by highlighting its tab on the left

side of the screen. The menu’s settings will be

previewed, but you will not be able to make any

changes. See Figure 2. Press the Enter Button to

make adjustments to the menu.

Select the Stereo/LtRt setting to output a 2-chan-

nel recording, or a downmix of a surround-encod-

ed program, through the Left- and Right-Channel

jacks of the Zone 1 Analog Audio Outputs. When

the Bass Management setting is set to either of

the other settings, these jacks will only output the

front left- and right-channel information, omitting

the center and surround information.

The first setting in the menu will automatically be

selected. If you wish to change its value, press

the Enter Button to view the available options in

a dropdown menu.

Use the KLButtons to highlight the desired

option, and press the Enter Button to select it.

Video Presentation Mode: Select Original to

display videos and pictures in their native aspect

ratio, or Full when the DMC 1000 is connected to

a 4:3 aspect ratio display.

NOTE: The Stereo setting is required when either

the Digital Audio Out Format or HDMI Audio Out

settings in the Audio Setup menu are set to

Uncompressed (i.e., output a 2-channel PCM sig-

nal).

If you wish to close the dropdown menu without

changing the setting, press the Back Button.

When Full is selected, 16:9 materials will appear

on 4:3 displays in “letterbox” format, with black

bars at the top and bottom of the screen. On

16:9 displays, 16:9 materials will fill the screen,

but 4:3 materials will appear with black or gray

bars on the left and right sides of the screen.

The DVD Player Setup Menu contains the

following settings.

Content Play Mode: This setting compensates

for disc authoring errors that occur when the

frame rate is not properly maintained during the

conversion from film to video. It only affects pro-

gressive scan display using the HDMI Output or

the Component Video Outputs. Three choices are

available:

Preferred Subtitle Language: Defines your

preferred subtitle language. Every time a disc will

be played that contains this subtitle language, it

will be shown automatically. If you do not find

your preferred language in the list of options, you

can select your preferred language by highlight-

ing OTHER. Press ENTER and use the Navigation

Buttons to select your preferred language from

the list shown on the screen. Note that only

those languages will be available that are actual-

ly on the DVD you would like to play. You can

also set the preferred subtitle language to OFF. In

that case no subtitles will be shown.

NOTE: The DMC 1000’s own menu screens are

always output in widescreen (16:9) mode at a

maximum resolution of 720p, depending on the

display’s capabilities. When viewed on a 4:3 dis-

play, the menu screens will appear in letterbox

format.

• Auto: This is the recommended setting. The

DMC 1000 analyzes the signals from the DVD,

determines whether it was originally recorded

on video or shot on film, and adjusts the output

accordingly.

• Film: Choose this option for material that was

originally shot on film, even though you are

viewing it on video via a DVD.

• Video: Choose this option for material that

was shot directly to video, such as concerts and

sports programming.

SYSTEM SETUP 21

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup

• DVD Bass Management Stereo/LtRt: Use

this setting to output a 2-channel signal with-

out a separate low-frequency channel for the

subwoofer. The front left and right speakers

default to the Large (full-range) setting, with

the center, surround and subwoofer speakers

all disabled. These settings may not be

changed.

Audio Setup

Video Setup

Each setting applies to a certain type of audio

output, but only for Zone 1. The audio output to

Zones 2, 3 and 4 is always full-range, 2-channel

analog line level.

The Video Setting Submenu contains the

following settings. Follow the explanations in the

Instruction Line on the bottom of your screen to

change the settings.

These settings are usually set automatically by

the DMC 1000, depending on which video out-

put is in use. See Figure 6.

Select Save when you have finished your adjust-

ments, or Cancel to return to the Audio Setup

Menu without making any changes.

Digital Audio Out Format: If your system

includes 5.1 digital audio surround decoding

(Dolby Digital and/or DTS), select Compressed as

the digital output. In that case all audio signals

will be output with their original format. If your

system only includes stereo and/or Dolby Pro

Logic, select Uncompressed. Then all audio sig-

nals will be output in PCM format only (DTS will

output no signal).

Figure 5 – Audio Setup Menu

Speaker Setup: A dialog box appears, allowing

you to program the Speaker Size settings used

with the Zone 1 (6-Channel) Analog Audio

Outputs. The settings are dependent on the DVD

Bass Management setting in the DVD Player

Setup menu.

Figure 6 – Video Setup Menu

HDMI Audio Out: This setting determines the

format of the audio output via the HDMI Output.

It is dependent upon the capabilities of your

receiver or video display (if the DMC 1000 is

connected directly to a display). We recommend

that you leave it at the Auto setting, in which

case the DMC 1000 will communicate with the

device it’s connected to and automatically select

a setting that is compatible with that device.

Video Output: When both the analog video

outputs and the HDMI Output are connected,

select the desired video output. Both HDMI and

the analog video outputs are not available simul-

taneously. Example: The HDMI Output is connect-

ed to a display in the main listening room and

the Composite Video Output is being distributed

to a multizone system.

• DVD Bass Management Bypass: This is the

default system setting, and should be used

when the receiver or processor is capable of

performing bass management. Configure the

speaker settings on the receiver. All main

speakers default to the Large (full-range) set-

ting, and the subwoofer is on. These settings

may not be changed.

• Auto: This is the default setting, and it is

recommended that you leave the HDMI Audio

Out line at this setting. The DMC 1000 will

automatically select the correct setting, based

on the capabilities of your receiver or video dis-

play.

• DVD Bass Management On: Use this setting

if the receiver is not capable of performing bass

management, to ensure that the low frequen-

cies steered to each channel match the fre-

quency-response capabilities of the speakers.

• Uncompressed: At this setting, all digital

audio is decoded and output as PCM streams.

For example, a DVD with a Dolby Digital sound-

track will be decoded, and 5.1 PCM streams

(one per channel) will be output through the

HDMI Output for playback by your receiver.

I The default settings are Small (only fre-

quencies of 200Hz and higher are passed)

for all of the main speakers, and the sub-

woofer is on.

I With the left and right speakers set to

Large, the center speaker may be set to

Small or None, but not Large. Change the

Center and Surround settings to None for

stereo mode when listening to 2-channel

recordings. The subwoofer will remain on.

Use this configuration when you desire the

added power of a separate subwoofer for

the low frequencies.

I Change the left and right speaker setting

to Small when using a speaker system con-

sisting of small satellites and a subwoofer.

The Center and Surround settings will

automatically change to Small, and the

Subwoofer setting will remain on; neither

setting may be changed.

• Compressed: This setting may be used with

receivers that are capable of decoding digital

multichannel formats from the HDMI stream.

• Off: Use this setting if your receiver is not

capable of processing the audio portion of the

HDMI stream and you have made a separate

digital audio connection from the DMC 1000 to

the receiver. No audio will be passed to the

HDMI Output.

IMPORTANT NOTE: When the HDMI Output is

active for audio, the Optical and Coaxial Digital

Audio Outputs are muted. If the HDMI Output is

being used for video only and the S/P-DIF outputs

are required for audio, turn the HDMI Audio Out

setting Off.

22 SYSTEM SETUP

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup

Output Resolution: This setting may be used to

change the video output resolution. It affects the

Component Video Outputs and the HDMI Output,

but with different allowed settings depending

upon whether the HDMI Output is in use. This

setting may also be changed by pressing the

Video Mode Button on the remote repeatedly to

cycle through the available settings options.

Restore: This setting is used to restore a backup

copy of the system settings and Media Library

contents. The existing contents of the Media

Library will be erased. Use this feature only in the

unlikely event that the hard-disc drive in your

DMC 1000 has been replaced.

General Setup

These general system settings should be accessed

with caution. See Figure 7. If you are uncertain

about the proper setting for any of these options,

consult with your dealer or installer, or contact

Harman Kardon Customer Service at

Reset Factory Defaults: This setting is used to

return all of the Setup Menu settings to their fac-

tory defaults. They will then have to be reconfig-

ured as required for your application. The con-

tents of the Media Library are not affected by this

command.

www.harmankardon.com.

• HDMI Output In Use: With the HDMI Output

connected to another device, this setting

defaults to Auto, but you may change it to

576p, 720p, 1080i or 1080p. We recommend

leaving the setting at Auto, in which the

DMC 1000 sets the video output based on the

capabilities of the device it is connected to. If

you attempt to select a video output resolution

that your video display is not capable of han-

dling, such as 1080p for a display that is only

1080i-capable, you will not see a picture.

Network: When the DMC 1000 is connected to

a network, the network settings are identified

here. These settings may be used with other

devices when the DMC 1000 is to be used as a

media server as part of a home network. This fea-

ture also allows you to test the network connec-

tion to make certain that Internet access is avail-

able. Press the “9” key on the remote twice, to

display the Internet Protocol (IP) address on the

front panel.

Figure 7 – General Setup Menu

• HDMI Output Not In Use: When no device is

connected to the HDMI Output, this setting

only applies to the Component Video Outputs.

Only two values are available: 576i (the

default) and 576p. Select 576p only if your

video display’s component video inputs are

capable of handling a progressive scan signal.

If it isn’t, you will see no picture or a distorted

picture when this setting is changed to 576p. In

that case, press the Video Mode Button on the

remote to correct it.

Software Update: When system software

updates are released, this setting will be used

during the installation process. Do not make any

changes here unless instructed to do so.

Language Selected: Select the display lan-

guage for the DMC 1000’s menus here. Choose

from the default English, or Spanish, French,

German or Italian.

Date & Time: The first time the DMC 1000 is

used, set the local time and date here.

System Information: This setting displays the

software version number and the amount of

hard-disc space available. It is informational only.

Format USB: This command allows you to refor-

mat a USB device, which completely erases the

contents of the drive. Exercise great caution

before reformatting a drive.

Picture Mode: Select from the Normal, Vivid,

Sport and Nature picture settings to optimize

viewing of various types of programs. This setting

is a matter of taste, and there is no incorrect set-

ting.

Advanced Setup

Now that your DMC 1000 has been installed and

configured, it’s easy to enjoy your favorite audio

and video programs from a variety of media,

including DVDs, CDs, memory cards, USB drives

and the DMC 1000’s own Media Library.

The settings shown in Figure 8 should be used

with caution. If you have any doubts about

whether it is appropriate to change these set-

tings, consult with your Harman Kardon dealer or

custom installer.

Video Noise Reduction: We recommend that

you leave this setting at the default “Off”. If

video signal noise is observed when using

theanalog video outputs, turn this setting on to

reduce the noise and improve the picture quality.

Figure 8 – Advanced Setup Menu

Backup: This setting is used to back up the sys-

tem and Media Library contents to a USB storage

device.

SYSTEM SETUP 23

Download from Www.Somanuals.com. All Manuals Search And Download.

DMC Basics

Turning On the DMC 1000

playback. You may program a Play Queue of

items for immediate playback, or a Playlist that is

stored for later retrieval. Record an audio stream

from a device connected to the Auxiliary Inputs,

or copy a playlist to any of the portable media,

including a recordable CD, a memory card or a

USB drive. You may also control audio playback

in up to four separate zones at a time. The DMC

1000’s sophisticated yet easy-to-use on-screen

menus will guide you at every stage.

or in rare instances when there is a gap in the

database.

The DMC 1000 has four power states, each

designed to minimize unnecessary power con-

sumption.

DVD Playback

The DMC 1000 supports all of the features and

options of standard DVDs. However, not all discs

offer each option at all times. If the “Function

Prohibited” icon (Ø) appears, then you are

attempting a function that is not available at that

time or with that media, and it does not indicate

a problem with the DMC 1000.

• Full-Off Mode (Dim Blue) – The DMC 1000,

including its hard-disc drive, is fully powered

down, but is ready to be turned on using the

front panel or remote control.

• Sleep (Standby) Mode (Amber) – The DMC

1000 will not respond to any commands other

than to power on.

Playing DVDs and CDs

Disc Playback Features

With the DMC 1000 turned on, press the

Open/Close Button on the front panel or remote.

Gently place the disc in the tray, making sure to

seat it properly. Refer to the Media Compatibility

section for details on which disc types may be

played in the DMC 1000. Other disc types will

not play. The DMC 1000 will take a few moments

to read and identify the disc.

• Server Mode (Amber) – The DMC 1000

may be controlled via the RS-232 Port or the

Network Connection, but the on-screen menu

system is off.

Skipping tracks or titles/chapters

To move forward or backward through the tracks

on a CD or the titles or chapters on a DVD, press

skip on the front panel or Previous/Next on the

remote.

• Full-Power Mode (Bright Blue) – The DMC

1000 operates normally.

Fast Motion Playback/Fast Search

See Table A7 in the Appendix for a description of

each mode and the DMC 1000’s response to the

power controls.

1. To move forward or backward through the

DVD or CD disc being played at fast speed,

press Search on the remote. Once one of these

buttons is pressed, the fast search will contin-

ue until Play is pressed.

If the disc is a DVD, it will automatically begin

playing. Although we recommend using the disc’s

own menu system for navigation, audio track

selection and subtitle language selection, see the

DVD Playback section for instructions on using

the DMC 1000’s commands for these functions.

NOTE: There is technically a fifth state of “no

power,” in which the power cord is unplugged

and/or the rear-panel Master Power Switch is

turned off in the circle position (0). However,

it is unlikely you will see this situation in normal

use.

There are four fast-play speeds. Each press of the

Search Buttons will cycle to the next speed in the

following order: x2, x4, x8, x16, indicated by a

number of arrow indicators on the right top of

the screen.

If the disc is an audio CD, the DMC 1000 will

automatically copy it to the Media Library at high

speed, displaying the progress of the recording

as a percentage. The DMC 1000 is capable of

playing back the recording almost as it is being

made (if your unit has been set up for Play and

Record operation). Once the recording is com-

pleted, you may remove the disc and continue to

listen to the content as it is played from the

Media Library.

Press the front-panel Power Control or remote

Power On Button to turn on the DMC 1000

when the Power Indicator is dim blue or amber.

2. Press PLAY at any time to resume normal

playback.

When the Power Indicator is bright blue, press

the front-panel Power Control or remote Power

Off Button to switch to Server Mode (Power

Indicator turns amber), or press and hold either

control to turn the DMC 1000 fully off (Power

Indicator turns dim blue).

Note that there will be no audio playback during

fast-forward or -reverse play of DVD discs. This is

normal for DVD, as A/V receivers and surround

processors cannot process the digital audio

streams during fast-play modes; audio will be

heard during fast-play of conventional CD’s.

When a CD or other music content is added to

the Media Library, the DMC 1000 accesses

Gracenote MusicID, which includes a vast online

database containing identifying information for

almost every commercial CD in existence, as well

as cover art for the vast majority of CDs. This

powerful service enhances the listening experi-

ence, as the user is able to view album, artist and

track information and the cover art during play-

back. This information is then stored in the

Media Library. A copy of the database resides in

the DMC 1000 so that even when it is not con-

nected to the Internet, the identifying informa-

tion for most popular CDs (except for cover art) is

retrieved and stored with the audio in the Media

Library. However, for the latest and most com-

plete version of the database, we recommend

connecting the DMC 1000 to a high-speed

Internet access point. Music recognition technol-

ogy and related data are provided by Gracenote.

Gracenote is the industry standard in music

recognition technology and related content deliv-

ery. For more information, visit

When the DMC 1000 is in Server Mode (Power

Indicator is amber and Server Mode message is

displayed), press the Power Off Button on the

remote to switch to Sleep Mode (Power Indicator

remains amber).

Freeze Frame and Frame Advance

(with DVD only)

1. Press PAUSE when a DVD is playing to freeze

the picture.

2. Each time you press one of the STEP (FWD or

REV) buttons, the picture advances one frame.

Using the DMC 1000

After turn-on, the DMC 1000 will display its

Main Menu (see Figure 9). If the Media Library is

loaded with content, any cover art will appear in

a mosaic in the background.

3. Press PLAY to resume normal playback.

Slow Motion Playback (with DVD only)

1. When a DVD disc is in pause or freeze frame

mode, you may move slowly forward or back-

ward through the program being played at

one of the speeds by pressing the Slow

Buttons on the remote. Each press of the

buttons will move to the next speed, indicated

by a number of arrow indicators on the right

top of the screen.

2. Press PLAY to resume normal playback.

Note that there will be no audio playback during

slow-forward or -reverse play of DVD discs. This

is normal for DVD, as A/V receivers and surround

processors cannot process the digital audio

streams during slow modes. Slow play is not

available for CD.

www.gracenote.com.

NOTE: When no cover art is available, the DMC

1000 will display a generic musical-note icon.

This may occur if the DMC 1000 is not connected

to the Internet, if a noncommercial disc is loaded,

Figure 9 – Main Menu

From the Main Menu, you may play content from

the Media Library or select another source for

24 DMC BASICS

Download from Www.Somanuals.com. All Manuals Search And Download.

DMC Basics

Notes: Playback features may not be available

during the opening credits of a movie. This is

intended by the disc author and is not a failure of

the DMC 1000.

Using the On-Screen Status

Display

When a DVD is playing, you may press the

A-B Repeat Play

The Repeat A-B function allows you to select any

portion of a CD and have it repeat continually

until the unit is manually stopped.

Status Button

at any time to view a quick

Playback of a DVD with 96kHz/24-bit audio

requires the use of circuitry normally used for

other features. Accordingly, Slow Play Reverse

and Step Advance features are not available with

these discs.

summary of the disc’s playback status. The Status

Bar not only gives you a snapshot of the unit’s

current state; it also provides an easy way to

select a different title, chapter or track, or use the

time search feature.

Depending on the structure of a VCD disc, the

functions Slow Reverse and Step Reverse may be

prohibited or have no function and Fast Playback

(Search) may not function.

Figure 13 – A-B Repeat Display

To initiate a Repeat A-B playback sequence,

follow these steps while a disc is playing:

1. Press the A-B Repeat Button

on the

Chapters and Titles

Figure 11 – Status Display

remote when you want to choose the begin-

ning point; the Repeat icon appears in the

upper right corner of the screen, followed by

A- to indicate the beginning of the passage

to be repeated.

DVDs contain one or more features organized as

titles. We recommend selecting titles using the

disc’s menu system, where they are identified

by name.

• Title: This displays the current title on the

left, and the total number of titles on the disc

on the right.

• Chapter: This displays the current chapter on

the left, and the total number of chapters on

the disc on the right.

Because titles can run for several hours, they are

generally divided into chapters, each of which is

typically no more than a few minutes long,

encompassing one or more scenes. Chapter

selection allows you to go straight to your

favorite section of the movie, or to easily skip

past sections you’ve already viewed. Most discs

offer a chapter selection menu that includes

thumbnail images for easy identification.

2. Press the A-B Repeat Button

again to

choose the end point. Repeat A-B has been

set, and the A-B section will be played

continuously.

• Time Display: This section of the display

shows the time corresponding to the type of

display indicated in the Time Display Type.

The Time Search function enables you to start

playback at any point in the program. Use the

3. Press the A-B Repeat Button

remote again to cancel Repeat A-B mode.

on the

Video Off Feature

M NNavigation Buttons

to highlight

this display, and the numbers will change to

dashes. You may then use the Numeric Keys

to enter the numbers corresponding to the

time on the disc at which you wish play to

During CD playback, some listeners may prefer to

turn off the DMC 1000’s video circuitry. Although

the video section is electrically isolated from the

audio section, some users may prefer to turn the

video displays off during audio playback to

prevent any possibility of interference between

audio and video. You may also wish to turn the

video display off if you find the menu system

distracting or unnecessary during CD playback.

To select a chapter or title by number, press the

Find Button on the remote to display the Find

Menu. See Figure 10. Pressing any Numeric Key

will also display the Find Menu, with the number

shown in the Chapter cell. Press the Enter Button

commence. Press the Enter Button

6, and

play will immediately begin at the selected

time position.

• Time Bar: This display is a graphic

representation of the time elapsed for the title

being played. As the disc plays, the number of

bars will increase to reflect approximately what

percentage of the title has been played thus

far.

IMPORTANT NOTE: It is strongly recommended

that plasma video display owners use the Video

Off feature to avoid burn-in.

To turn the video displays off while a CD is

Repeat Play: This setting controls whether the

tracks are repeated.

playing, simply press the Video Off Button

Q. Press the button again to restore the video

to jump directly to that chapter.

Figure 10 – Find Menu

output. The V-Off Indicator G will light to

remind you that the video displays have been

turned off. Note that the video output will

automatically be restored each time the

DMC 1000 is turned on.

To select a title by number, navigate to the Title

cell, enter the title number and press the Enter

Button.

Figure 12 – Play Mode Menu

To begin play from a specific time location within

the title, also known as “Time Search,” navigate

to the Time cell and enter the desired starting

point. Press the Enter Button, and play will

immediately begin at the selected time.

• Track: Repeats the track currently playing until

play is manually stopped. The “Repeat”

Indicators will light in the front-panel display.

• All: Repeats all tracks on the disc until play is

manually stopped.

You may also select a title or chapter, using the

Status Display.

The “Repeat” and “All” Indicators will light in

the front-panel display.

• Off: Normal playback of the current track

followed by all remaining tracks on the disc,

unless the Random or Programmed play

functions have been selected.

DMC BASICS 25

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

Audio Playback From the Media Library

Genres: Displays your library organized into

genres. Select a genre and press the Enter Button

to view all artists tagged with that genre.

• Play Now: The current selection is played

immediately, replacing other content in the

Play Queue. The Play Queue is a list of content

in line to be played. It is saved until the DMC

1000 is powered down to Full-Off mode (dim

blue).

The DMC 1000’s Media Library makes it easy to

store all of your audio content in one place for

convenient playback in your main home theater

Navigate to the desired sorting option and press

room, in three remote “zones” (if you have set up the Enter Button to view the Media Library (see

the DMC 1000 as part of a multizone system), on

a device connected to a home network, or any-

where else when you transfer the content to

portable media.

Figure 15).

• Add to Queue: The current selection is added

to the end of the Play Queue, and the media

currently playing continues until it is finished.

The Play Queue may be accessed from the

Main Menu.

When you first turn on the DMC 1000, the

assumption is that you will most likely want to

listen to content stored in your Media Library, and

the Main Menu (see Figure 14) is configured that

way.

• Add to Playlist: The current selection is

added to a new or existing playlist. A dialog

box will pop up, asking you to select from the

existing playlists or create a new one (see

Figure 17). The DMC 1000 is programmed with

several empty playlists named to fit different

moods or occasions, including Dance and

Dinner. Up to four playlists are shown at a

time. The playlists may be accessed from the

Main Menu.

Figure 15 – Media Library

The Media Library lists the items (in this case,

albums) in your collection, with the current selec-

tion highlighted by a magnifying bar. The cover

art, or an icon if the cover art could not be

found, is highlighted. Press the Enter Button to

expand the album into a track view.

NOTE: You may have noticed that letters appear

above the Numeric Keys on the remote. The DMC

1000 is capable of using alphabetic characters as

well as numbers, which allows you to search the

Media Library by entering the Numeric Key corre-

sponding to the first letter of your selection. Each

Numeric Key represents three letters. The first

press jumps to the selections beginning with the

first letter in the group, and the character-entry

dialog box appears. You may enter additional let-

ters to refine your search or change the first let-

ter by navigating to the Clear command and

repeatedly pressing the Numeric Key until the

desired letter appears in the text bar. Navigate to

the Done command when you have finished

entering a search term. Alphanumeric entry is

also used to edit content tags and to name

playlists. See Figure 16.

Figure 14 – Main Menu

Press the Enter Button to select the highlighted

“Play” option, and the DMC 1000 will offer you

a variety of sorting options. Large music collec-

tions may be easier to manage when sorted by

artist or album. As shown in Figure 14, you may

select from one of six possible sorts, or views, of

the Media Library.

Figure 17 – Select a Playlist

• View Artists: Available when the Media

Library is sorted by genre, this command dis-

plays all artists within the selected genre.

Cover Art: Displays a mosaic of album covers

retrieved by Gracenote MusicID when the DMC

1000 is connected to the Internet. Cover art

may be organized alphabetically by name, by

artist or in the order added, starting with the

most recent additions. As described below, use

• View Albums: Available when the Media

Library is sorted by artist, this command

expands the current artist to view all of his or

her albums in the library.

the

/K/LNavigation Buttons to move

the “magnifying glass” to the desired album,

and press the Enter Button to see the playback

options.

• View All Tracks: Expands the current album

into a track view.

• Open Playlist: Available when the Media

Library is sorted by playlists, this command

opens the list.

Tracks: Displays all tracks individually in alpha-

betical order. The tracks may be organized alpha-

betically by name, artist, album or in the order

added, starting with the most recent additions.

• Edit Name: Available when the Media Library

is sorted by playlists, this command allows you

to rename the playlist if you no longer want to

use the name selected when the playlist was

created.

Artists: Displays all artists in alphabetical order.

Select an artist and press the Enter Button to

view his or her albums.

Albums: Displays all albums in alphabetical

order. Select an album and press the Enter Button

to display its tracks.

Figure 16 – Character-Entry Dialog Box

Playlists: Displays all playlists you have pro-

Use the

Navigation Buttons to scroll

grammed.

through the playback options described below.

The availability of each of these options and

commands depends on how the Media Library is

sorted.

26 OPERATION

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

• Edit Info: This command is available for

tracks and albums only. A dialog box appears,

allowing you to edit the identifying informa-

tion, including renaming tracks. See Figure 18.

The box is slightly different when the Media

Library is sorted by tracks. A character-entry

dialog box appears when you select any field

for editing. See Figure 16 and the note on the

previous page. Select the Find Info command

to activate Gracenote MusicID.

NOTE: When no cover art is available (e.g., if

the DMC 1000 was not connected to the

Internet when the CD was loaded, if the disc is

noncommercial or if there is a gap in the data-

base), the album will not appear in the Cover Art

sort, although you may select it when viewing

the Media Library by Tracks, Artists, Albums,

Playlists or Genres. A musical note icon, such as

the one shown in Figure 18, will appear in place

of the missing cover art.

Data Media

Figure 20 – Data CD

The DMC 1000 recognizes media containing

data files in the MP3, JPEG and WAV formats.

Press the Enter Button to expand a folder, or

select the Go Up command to collapse it. The

other commands function as usual, and the Add

to Library command allows you to import the

content to the Media Library for playback after

the media has been removed from the DMC

1000.

Load a data CD in the disc player, or insert a

memory card in the appropriate card slot, or

connect a USB drive to either USB Port, and the

device will be available for selection as a media

source in the Main Menu. See Figure 19.

The Play Queue and Playlists

The DMC 1000 allows you to program playlists

that are saved for future playback, plus a play

queue of items for immediate play.

Figure 18 – Edit Info Dialog Box

The Play Queue

• Delete: Select this command if you wish to

remove the content from the Media Library. Be

aware that the DMC 1000 does not play audio

CD content directly from the disc. If you load

the CD again, it will be recopied to the Media

Library.

The Play Queue is simply a list of all items that

are queued up to be played. There are two ways

to add an item to the play queue:

1. Display the desired content on screen by

selecting the correct source (the Media

Library, a card slot, a data CD or a USB

device) and selecting the audio or still-image

content. Scroll to the desired content, e.g., a

Figure 19 – Source Selection

When a data source is selected, the only sorting

options are Audio and Photos. Select one, and

the regular Media Library will appear, except

that unlike audio CDs, which are organized as

albums containing individual tracks for each

song, data sources are organized as folders con-

taining individual files for each song or still

image. However, navigation of the content is

similar to audio. See Figure 20.

Cover Art Sort

You may have noticed the cover art mosaic that

appears in the background of the Main Menu

when you turn on the DMC 1000. With the Main

Menu on screen, select the Cover Art sorting

option for the Media Library and the focus shifts

to this mosaic. Use the Navigation Buttons

to move the “magnifying glass” to the desired

album cover, identifying the artist and album.

F/G Navigation

song track or file, use the

Buttons to highlight the Play Now command,

and press the Enter Button. The existing Play

Queue will stop and add the selected item,

which will begin playing immediately. The pre-

vious Play Queue items will be deleted.

2. With the desired content on screen and the

item selected, use the F/G Navigation

Buttons to highlight the Add to Queue com-

mand. Press the Enter Button to add the item

to the end of the Play Queue.

Press the Enter Button to display the playback

options: Play, Add to Queue, Add to Playlist,

View Album, Edit Info and Delete Album. Select

View Album to switch to the regular Media

Library view with the album expanded to view

the tracks. The other playback commands func-

tion in the same way as in the Media Library

view.

OPERATION 27

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

To view the play queue, press the Menu Button

to display the Main Menu, and navigate to the

Play Queue line. Press the Enter Button. The Play

Queue is preserved unless the DMC 1000 is

powered down to Full-Off mode (by pressing

and holding the Power Off Button on the remote

so that the front-panel Power Indicator turns

dim blue). If the Play Queue line in the Main

Menu is dimmed, the Play Queue has been

erased.

Using

The Bridge is an optional dock that may be used

with a compatible iPod (not included). When The

Bridge is connected to its proprietary input on

the DMC 1000 and the iPod is docked, you may

enjoy the audio and still-image materials stored

on your iPod.

When an iPod is docked in The Bridge, the IPOD

FOUND message will appear on the front panel,

and a banner with The Bridge icon and the

Detected message will appear on screen. The

iPod will be in “disc mode,” and its screen will

display the “OK to disconnect” message. Do not

physically undock the iPod while its content is

playing. However, you may select the Undock

command at any time.

The Play Queue is not available during DVD

playback, or when The Bridge is the media

source.

Figure 21 – Select a Playlist

Playlists may be edited by selecting the Playlist

View from the Media Library. Press the Menu

Button to view the Main Menu, and navigate to

the Playlists view in the Media Library. Press the

Enter Button, and scroll to the desired playlist.

The commands function as expected:

You may create playlists that are permanently

saved by name for future playback.

Programming a Playlist

Playlists are not only a convenient way to store a

queue of your favorite songs, but they are

required to transfer audio from the Media

Library to any of the portable media. See the

Content Transfer section for more information.

Select The Bridge as the media source from the

Main Menu. The menu shown in Figure 22 will

• Play Now: Plays the selected playlist immedi-

ately, adding it to the Play Queue.

• Add to Queue: Adds the selected playlist to

the end of the Play Queue.

To program a playlist, display the desired con-

tent on screen by selecting the correct source

(the Media Library, a card slot, a data CD or a

USB device) and selecting the audio or still-

image content. Scroll to the desired content,

e.g., a song track or file, use the F/G

• Add to Playlist: Adds the selected playlist to

a new or existing playlist.

• Open Playlist: Opens the playlist to allow

editing of individual tracks, including removing

a track from the playlist, changing the track’s

order within the list, selecting the track for

immediate play, adding the track

Navigation Buttons to highlight the Add to

Playlist command, and press the Enter Button.

appear.

to the Play Queue or a playlist, editing the

track’s identifying information or deleting the

track from the Media Library.

A pop-up screen will prompt you to select from

an existing playlist, to name a new playlist, or to

select an empty prenamed playlist, such as

Dance or Chill. See Figure 21. If you select one

of the prenamed playlists and have already used

that name, a number will be added to the end to

differentiate the new playlist. The pop-up dialog

box displays up to four playlists at a time. Scroll

up or down to view the remaining playlists.

Figure 22 – The Bridge menu

Navigate the contents of the iPod in a similar

manner to other data media sources. Select

between the audio (music) and still-image

(photo) content. When Music is selected, you

may sort it using views similar to those in the

iPod’s own menu: Playlists, Artists, Albums,

Songs, Podcasts, Genres, Composers or Audio

Books.

• Edit Name: Opens the character-entry dialog

box to rename the playlist.

• Delete Playlist: Deletes the playlist (but not

its contents) from the Media Library.

Only three options are available for iPod con-

tent:

Play Now: Begins play of the selected item

immediately. The Play Queue is erased.

Open: If an individual track is selected, it begins

play immediately. If the selected item is in any

other category, e.g., an artist or album, this com-

mand opens the item so you may view its con-

tents.

28 OPERATION

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

Undock iPod: This command ends play of any

content on the iPod and returns to the Media

Library view of the Main Menu. The iPod’s own

menu appears on its screen. To resume playback,

physically undock the iPod from The Bridge and

redock it.

Audio CDs

Auxiliary Inputs

As soon as an audio CD is loaded, the DMC

1000 begins the process of copying it to the

Media Library at high speed. It displays the

progress of the recording as a percentage record-

ed.

With the analog audio device connected to the

Auxiliary Inputs and the media loaded, either

press the Record Button, or press the Menu

Button to view the Main Menu. Scroll to the

Record line and press the Enter Button.

Press the Back Button to return to the previous

menu level, similar to pressing the Menu button

on the iPod itself.

At the same time, the DMC 1000 automatically

begins playing the copy of the CD from the

Media Library, if you have programmed the DMC

1000’s Setup Menu to do so.

Select “Auxiliary” from the dropdown menu as

the recording source. See Figure 23.

You may not import content from the iPod to the

Media Library, and you may not add the iPod’s

content to the Play Queue or a playlist. You may

not record from the Media Library to an iPod

docked in The Bridge. These are limitations of the

iPod’s design, and do not reflect a problem with

the DMC 1000.

The DMC 1000 uses Gracenote MusicID to iden-

tify the CD, tag it with the correct information

and import the album cover art, if available. If the

DMC 1000 is not connected to the Internet,

Gracenote MusicID will tag the content using the

offline database stored on the DMC 1000’s hard-

disc drive; however, it will not display any cover

art. For homemade discs, the service will attempt

to identify the content based on any tags that

were created when the disc was recorded.

NOTE: The Bridge may not be compatible with

some iPod models, particularly the iPhone and

the iPod touch. To enjoy content stored on these

devices, connect a cable from the device's head-

phone output to the DMC 1000's Auxiliary

Analog Audio Inputs.

Figure 23 – Select a Recording Source

Next, select the Media Library (the only option)

as the recording destination. The screen shown in

Figure 24 will appear.

After the DMC 1000 has finished copying the CD

to the Media Library, you may remove the disc

and store it.

Auxiliary Analog Audio Inputs

In addition to digital media, the DMC 1000 also

accommodates analog source devices, such as

cassette decks and turntables, but mainly as a

recording source. Connect the device to the rear-

panel Auxiliary Inputs.

NOTE: The DMC 1000 initially copies the CD to

.wav files. If you have adjusted the Audio

Encoding Quality setting in the Media Library

Setup menu to one of the MP3 formats, the DMC

1000 will then encode the .wav files as MP3 files

at the specified sampling rate. If you attempt to

transfer the CD from the Media Library to a

memory card, recordable CD or USB drive before

the encoding is completed, the files will be trans-

ferred as .wav files. Since .wav files are much

larger than MP3 files, depending on your desti-

nation media, you may not have enough space to

complete the transfer.

IMPORTANT NOTE: Do not connect a turntable

directly to the DMC 1000 unless it includes an

onboard phono preamp or is connected to an

external phono preamp which is then plugged

into the Auxiliary Inputs. Phono preamps may be

available from specialty audio shops or electron-

ics stores.

Figure 24 – Record From the Auxiliary Inputs

Select the Listen to Aux In option to monitor the

analog device. Begin playing the device, and cue

it up to the desired starting point. Example: most

cassette tapes include about five seconds of

blank leader tape, plus additional blank tape at

the beginning. Play until the audio begins so as

to minimize the amount of dead air in the

recording.

The device connected to the Auxiliary Inputs is

not available for source selection in the usual

manner. It is selected as a recording source, as

described in the Content Transfer section,

although it is possible to monitor the source

without making a recording.

Data CDs

Data CDs are discs that contain sound and image

files. They are recognized when loaded, but oper-

ation is handled differently.

To transfer the CD’s content to the Media Library:

Content Transfer

1. Select it as a playback source, and view the

audio files. Still-image files may not be added

to the Media Library.

One of the DMC 1000’s most exciting features is

its ability to transfer content from one type of

media to another, and to store your library

of music on its internal hard-disc drive.

2. The CD is listed as a single folder, which you

may expand as usual. Select the Add to Library

option to import it to the Media Library. Audio

files are transferred in their original format,

e.g., as MP3 files.

The method for making recordings varies slightly,

depending on the source media.

OPERATION 29

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

NOTE: The DMC 1000 does not detect the pres-

ence or absence of an audio signal at the

Auxiliary Inputs.

To locate the newly recorded tracks, view the

Media Library by Track and by Last Added. The

track will be displayed at the top of the list. You

may also sort the Track view by Name, looking

for tracks starting with “AUX.” You may wish to

view the Tracks by Artist, as all tracks with artist

“Unknown” will be listed first, and the record-

ings will appear here.

NOTE: If recordings made from the Auxiliary

Analog Audio Inputs were tagged by Gracenote

MusicID, the DMC 1000 will generate new file

names in the format of [artist] – [three-digit track

number].wav. The tags will be transferred to the

portable media with the file. Thus, if you upload

the file from the media to your PC using software

that is capable of recognizing the tags, the track

will appear with its correct song title and other

information.

When you are ready to begin the recording,

select the Start Recording option and begin play-

back of the analog device. You may experiment

by making several recordings and deleting those

you don’t want.

Select the Edit Info option to rename the tracks

and add other identifying information. Enter as

much information as possible about the track to

enable Gracenote MusicID to locate any cover art

and properly tag the track. This is particularly

useful when you have recorded commercial

albums from cassette, vinyl or other analog

media.

While the recording is in progress, a screen simi-

lar to the one shown in Figure 25 will appear.

Solid-State Media

You may transfer content from any of the solid-

state media (memory cards or USB device) to the

Media Library in a similar fashion to recording

from the Media Library. However, it is not neces-

sary to create a playlist, since the data media are

already organized as file folders.

Media Library

You may transfer audio content from the Media

Library to any of the portable media – memory

cards installed in the card slots, a USB device

connected to one of the USB Ports, or a record-

able CD loaded in the Disc Player.

1. Press the Record Button, or select the Record

command from the Main Menu, and select the

solid-state media as the source, with the

Media Library (the only option) as the destina-

tion.

Figure 25 – Recording in Progress

1. Create a playlist of the desired content. The

Play Queue may not be used for this purpose.

2. The DMC 1000 will display the folders and

files stored on the media. Select one or more

items for recording.

Make a note of the file name automatically gen-

erated by the DMC 1000 to easily locate the

recording later. The DMC 1000 also displays the

elapsed time, and a graphic and numeric display

of the space available on the hard-disc drive.

2. Press the Record Button, or select the Record

command from the Main Menu, and select the

Media Library as the source, with the other

media as the destination.

3. When all selections have been made, select

the “Record Selected” option to begin the

transfer.

Select the Pause Recording option to pause the

recording without starting a new file when

recording is resumed. This feature is useful if you

wish to record a series of audio tracks as one file

while skipping breaks in between, such as when

recording an entire side of a cassette tape into

one file.

NOTES:

NOTE: Content may only be transferred from one

of the solid-state media to the Media Library, not

from one of the solid-state media to the other. If

you wish to transfer content from one type of

media to another, first add the content to the

Media Library, and then record it to the other

type of media.

• When a blank recordable CD has been loaded,

you will be presented with the options of

recording it as an audio disc or as an MP3 disc.

Audio discs conform to the “red book” stan-

dard and may be played in any standard CD

player. Many CD players are not capable of

playing MP3 discs. Check with the manufactur-

er of the player for more information.

Select the Stop Recording option to end record-

ing of the file. The screen shown in Figure 26 will

appear.

• Any standard CD-R disc may be used. Special

Music/Audio Recordable CDs are not required.

3. The DMC 1000 will display the playlists in the

Media Library.

Select one or more playlists for recording.

4. When all selections have been made, select

the “Record Selected” option to begin the

transfer.

Selections are transferred in the same format in

which they are stored in the Media Library. Thus,

if your CDs are automatically recorded to the

Media Library in the MP3 format, they will be

transferred to the portable media as MP3s.

Analog audio streams are recorded from the

Auxiliary Inputs as lossless WAV files, and are

transferred in that format to the portable media.

Figure 26 – Recording Complete

Select Done if you are finished, or Record Next to

record another track, which returns to the screen

shown in Figure 25, allowing you to cue up the

next track.

30 OPERATION

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

Multizone Operation

To begin playback in any zone, navigate to its

line, make sure the colored box to the left of the

zone name is highlighted and press the Enter

Button. A checkmark will appear in the box. Press

the Menu Button to display the Main Menu, and

the current zone, along with any other zones

linked to it, will be identified in the upper right

corner of the video display.

The DMC 1000 is capable of streaming audio to

up to four independent zones simultaneously,

allowing users in different areas of the home to

enjoy unique programs. The zones may easily be

linked or unlinked to each other, to play the same

program in more than one zone. Manage the

zones by displaying the Main Menu and selecting

the Zones command. The screen shown in Figure

27 will appear.

Select content for playback in that zone as usual.

When you return to the Zones menu, the cover

art for the current selection, or a generic icon

when no cover art was found, appears to the left

of the line for each active zone.

Interrupt playback to any zone by navigating to it

and selecting the Pause Playback option. The

DMC 1000 will remember its location in the cur-

rent selection when the Play Button is pressed to

resume playback. When the Stop Playback option

is selected, the DMC 1000 will not remember the

location, and when the Play Button is pressed,

playback will start from the beginning of the

selection.

Figure 27 – Zones Menu

Zone 1 is the current zone, as indicated by the

checkmark in the box to its left. Each zone is

assigned a different color box, indicating none of

the zones are linked to other zones.

To rename a zone, highlight the button contain-

ing its name and press the Enter Button. Select

one of the default names, such as Den or Dining

Room, or create a new name. The DMC 1000’s

character-entry dialog box will appear to guide

you. (See Figure 16.)

To link zones together, highlight the line for what

will be the “master” zone.

If other zones are linked to the master zone, con-

tent playing in the master zone is streamed to

any zones linked to it. Select the Zone Links

option, and then select one or more of the other

three zones to link to the master zone.

To unlink zones, highlight the master zone and

select the Zone Links option. Click on a linked

zone to select it for unlinking.

OPERATION 31

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting Guide

TroubleShooting Guide

Symptom

Possible Cause

Solution

Unit does not turn on

• No AC power

• Check AC power plug and make certain any switched

outlet is turned on.

• Make sure Master Power Switch on rear panel is

turned on to the “1” position.

• If DMC 1000 was in “Full-Off” Power Mode

(Power Indicator dim blue), wait for system to reboot.

Disc does not play

• Disc loaded improperly

• Incorrect disc type

• Load disc label-side up; align the disc with the guides and place

it in its proper position.

• Check to see that disc is CD, CD-R, CD-RW, VCD, MP3, WMA,

JPEG, DVD-R, DVD-RW, DVD+R, DVD+RW (standard conforming),

or DVD-Video; other types will not play.

• Invalid Region Code

• Use Region 2 or Open Region (0) disc only.

• Rating is above parental preset

• Enter password to override or change rating settings.

No picture

• Intermittent connections

• Wrong input

• Check all video connections.

• Check input selection of TV or receiver.

• Progressive Scan output selected

• Use Progressive Scan mode only with compatible TV. If needed, press

the Progressive Scan/Interlaced Button

to toggle to the

correct mode.

• Video Off feature active

• Press Video Off Button

to reactivate video circuitry (see page 26)

• HDMI Output A is connected to a

video display that is not HDCP-compliant.

• The HDMI Output A may not be used with video displays that are not

HDCP-compliant. Unplug the cable and select another audio and video

connection (see pages 13 through 14).

• HDMI communications need to be reset

• Turn off all HDMI devices (DMC 1000, receiver, TV). Turn on

devices in this order: TV, then receiver, then DMC 1000.

No sound

• Intermittent connections

• Check all audio connections.

• Incorrect digital audio selection

• DVD disc is in fast or slow mode

• Surround receiver not compatible

with 96kHz PCM audio

• Check digital audio settings.

• There is no audio playback on DVD discs during fast or slow modes.

• Use analog audio outputs.

• Incorrect zone selection

• Use the Zones command in the Main Menu to select the

desired zone for playback.

• Zone not linked to active zone

• Use the Zones command in the Main Menu to link or unlink

zones to each other.

• Attempting to use Coaxial or Optical

Digital Audio Output with HDMI

Output active

• The HDMI and other digital audio outputs are not available at

the same time. To use the Coaxial or Optical Digital Audio Outputs,

change the HDMI Audio Out setting in the Audio Setup menu to Off.

Picture is distorted or jumps during

fast forward or reverse play

• MPEG-2 decoding

• It is a normal artifact of DVD playback for pictures to jump or show

some distortion during rapid play.

• DTS decoding

• Due to the format of DTS recordings, fast-play may overshoot

or undershoot desired place.

Some remote buttons do not operate

during DVD play; prohibited symbol

appears (see below)

• Function not permitted at this time

• Incorrect OSD language

• With most discs, some functions are not permitted at certain

times (e.g., Track Skip) or at all (e.g., direct audio track selection).

The OSD menu is in a foreign language

• Change the display language selection.

The

symbol appears

• Requested function not available at

this time

• Certain functions may be disabled by the DVD itself during

passages of a disc.

Picture is displayed in the

wrong aspect ratio

• Incorrect match of aspect ratio settings • Change aspect ratio settings.

to disc

Remote control inoperative

Disc will not copy to VCR

Password not accepted.

• Weak batteries

• Sensor is blocked

• Change both batteries.

• Clear path to sensor or use optional outboard remote sensor.

• Copy protection

• Many DVDs are encoded with copy protection to prevent

copying to VCR.

• Incorrect password being used or

password has been forgotten.

• Factory default password “1234” always remains active.

32 TROUBLESHOOTING GUIDE

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen saver not activated

Cannot program playlist

• Screen saver will not activate when

Setup menus are displayed

• Clear Setup menus or press Video Off Button to avoid

burn-in on plasma and CRT displays.

• Current source is other than

Media Library

• Playlists may only be programmed from content stored

in the Media Library. Transfer the other source’s content

to the Media Library, view it from within the Media Library

and then create a playlist.

Unable to select desired media

• No media is present

• Insert the appropriate memory card into one of the card

source slots, or a USB flash drive into the USB Port

• Only USB flash drives that do not function as stand alone

MP3 players are compatible

• Wrong type of USB drive was inserted

in USB Port

• Media was not inserted correctly

• Remove media and carefully insert according to the

instructions on page 7

TROUBLESHOOTING GUIDE 33

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical Specifications

Applicable Disc:

Disc formats: 5 inch (12 cm) or 3 inch (8 cm) DVD Video, Standard conforming DVD+RW, DVD+R, DVD-R,

DVD-RW, VCD, CD, CD-R, MP3, WMA, JPEG or CD-RW discs,

Region code: DVD Movie disc with Code 2 or 0 only.

DVD-Layers: Single Side/Single Layer, Single Side/Dual Layer, Dual Side/Single Layer, Dual Side/Dual Layer

Audio formats: Linear PCM, MPEG, Windows Media^®9,

Dolby Digital or DTS Audio discs

Still-image format: JPEG

Memory cards

Slot 1: Secure Digital (SD), Multimedia Card (MMC) and Memory Stick (compatible with Magic Gate) cards. Other card

types may be used with a compatible adapter, but are not guaranteed to be recognized by the DMC 1000 Slot 2: Compact

Flash I (CF) cards, or cards using a Compact Flash 1-compatible adapter Card Capacity: Up to 1 GB

USB Port:

Up to USB 2.0-compatible solid-state flash drives

PAL/NTSC

Video Signal System:

HDMI^™Output:

Video: 576p, 720p, 1080i, 1080p

HDMI Version 1.1a-compliant

HDCP Version 1.1-compliant

Composite Video Output:

S Video Output:

1 Vp-p/75 Ohms, sync negative polarity

Y/Luminance: 1 Vp-p/75 Ohms, sync negative polarity

C/Chrominance: 0.286 Vp-p

Component Video Output:

Y: 1 Vp-p/75 Ohms, sync negative polarity

Cr: 0.7 Vp-p/75 Ohms

Cb: 0.7 Vp-p/75 Ohms

2 Vrms max

Analog Audio Output:

Frequency Response:

DVD (Linear PCM):

2Hz - 22kHz (48kHz sampling)

2Hz - 44kHz (96kHz sampling)

CD:

2Hz - 20kHz

Signal/Noise Ratio (SNR):

Dynamic Range:

105 dB (A-weighted)

DVD: 100dB (18 Bit) / 105dB (20 Bit)

CD/DVD: 96dB (16 Bit)

THD/1kHz:

DVD/CD: 0.0025 %

Wow & Flutter:

AC Power:

Below Measurable Limits

100 - 240 V/50 ~ 60 Hz

12 Watts (Standby)/60 Watts (Max)

440 x 103 x 405 mm

8.7 kg

Power Consumption:

Dimensions (WxHxD):

Weight:

Depth measurement includes knobs and connectors.

Height measurement includes feet and chassis.

All specifications subject to change without notice.

Harman Kardon and Logic 7 are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries.

Designed to Entertain and Guide+Play are trademark of Harman International Industries, Incorporated.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Digital, ProLogic and the double-D symbol are trademarks of Dolby Laboratories.

Blu-ray Disc is a trademark of the Blu-ray Disc Association.

HD-DVD is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC).

iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

Muze is a registered trademark of Muze Inc.

xD-Picture Card is a trademark of Olympus Optical Co. Ltd.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision

Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses

only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos

Microsoft, Windows and WMA are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Kodak is a registered trademark, and Photo CD is a trademark, of Eastman Kodak Company.

DivX, DivX Certified, and associated logos are trademarks of DivX Networks, Inc and are used under license.

Memory Stick, MagicGate, Memory Stick Duo and SACD are trademarks or registered trademarks of Sony Corporation.

CompactFlash is a trademark of the CompactFlash Association.

Guide + Play is a trademark of Harman International Industries, Incorporated.

The SD logo is a trademark. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights

owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and

other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

34 TECHNICAL SPECIFICATIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Appendix – Default settings and worksheets

Table A1 – Media Library Setup Menu

Setting

Default

Your Settings

Auto Disc Insert Preferences

Audio Encoding Quality

Play & Record

MP3 192kbps (Medium)

Table A2 – DVD Player Setup Menu

Setting

Default

Off

Preferred Subtitle Language

Preferred Audio Language

Parental Control Level

English

Off

Video Presentation Mode

Dynamic Range Compression

DVD Bass Management

Original

Off

Table A3 – Audio Setup Menu

Setting

Default

Your Settings

Speaker Setup

Front L & R: Large

Surround L & R: Large

Center: Large

Front L & R:

Surround L & R:

Center:

Subwoofer: Yes

Subwoofer:

Digital Audio Out Format

HDMI Audio Out

Compressed

Auto

Table A4 – Video Setup Menu

Setting

Default

Your Settings

Video Output

Depends on physical connections.

Output Resolution

Depends on physical connections:

Analog (composite or S-video): 480i

Analog (component): 480p

HDMI: Auto

Table A5 – General Setup Menu

NOTE: These settings are not adjusted in normal use.

Setting

Purpose

Your Settings

Software Update

If a system software upgrade

becomes available in the future,

download it to a CD and follow the

instructions here.

Not used.

Date & Time

Set system date and time after a reset.

Adjusted only after a reset.

Not used.

System Information

Displays software version and

hard-disc drive usage.

APPENDIX 35

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Table A6 – Advanced Setup Menu

Setting

Purpose

Your Settings

Backup

Backs up hard-disc drive as a

precaution.

After your custom installer transfers your

music collection to the Media Library, he

or she should back it up as a precaution.

Restore

In case the hard-disc drive is replaced,

restores the Media Library from

Keep your backup of the Media Library

updated.

the last version that was backed up.

Reset Factory Defaults

System reset.

Use only as a last resort. Requires

reconfiguring all system settings.

The Media Library’s contents are

not affected.

Network

Displays network identification

Ethernet:

parameters. IP Address:

Subnet Mask:

Gateway Address:

DNS 1:

DNS 2:

Proxy Address:

Proxy Port Number:

Language Selected

Format USB

Sets system display language.

Default is English.

Reformats a USB device,

erasing all content.

Exercise extreme caution before using

this command.

Table A7 – Power Modes

Power

Mode

Indicator

Dim blue

Amber

Functionality

Front-Panel

Power Control

Remote Control

Power On

Remote Control

Power Off

Full-Off Mode

Sleep Mode

Server Mode

System powered down

System boots and goes

to Full-Power Mode

System boots and goes

to Full-Power Mode

No action

Standby; unit is ready

for quick turn-on

Full-Power Mode

No action

Amber

Remote-zone and

network control

available; on-screen

menus off

Full-Power Mode

Sleep Mode

Full-Power

Bright blue

Operates normally

Single press ›

Server Mode

No action

Single press ›

Server Mode

Press and hold ›

Full-Off Mode

Press and hold ›

Full-Off Mode

36 APPENDIX

Download from Www.Somanuals.com. All Manuals Search And Download.

Eula

END-USER LICENSE AGREEMENT (EULA)

IMPORTANT. READ CAREFULLY. THIS END-USER LICENSE AGREEMENT (“AGREEMENT”) DEFINES THE LEGAL

AGREEMENT BETWEEN YOU (INDIVIDUAL OR ENTITY) AND HARMAN CONSUMER GROUP, INC. (“HARMAN”).

YOU ARE PERMITTED TO USE THE DMC1000 (“PRODUCT”) AND THE SOFTWARE CONTAINED AND EMBEDDED

IN THE PRODUCT (“SOFTWARE”) ONLY IF YOU ACCEPT ALL OF THE TERMS AND CONDITIONS CONTAINED IN

THIS AGREEMENT. BY USING THE PRODUCT AND SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE TERMS

AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO BE BOUND, YOU MUST STOP USING THE

PRODUCT AND SOFTWARE. YOU AND HARMAN AGREE AS FOLLOWS:

8. Irreparable Harm. You agree that Your breach or

threatened breach of any provision of this

SOFTWARE AND DOES NOT MODIFY OR EXTEND

THE LIMITED WARRANTY. THIS AGREEMENT DOES

NOT: (I) PROVIDE YOU ANY ADDITIONAL REME-

DIES; OR (II) CONSTITUTE A MODIFICATION OR

EXTENSION OF THE REMEDIES AVAILABLE TO YOU

AS SET FORTH IN THE LIMITED WARRANTY.

1. Grant of License. Subject to the restrictions defined

in this Agreement, You are permitted to use the

Software solely as a part of and in connection with

your use of the Product for personal entertainment

and enjoyment purposes.

Agreement will cause irreparable harm to Harman

for which a remedy at law would be inadequate.

Harman is entitled to seek all available remedies at

law and in equity, including injunctive relief, to

enforce any provision of this Agreement and to

restrain You from adapting, disclosing, distributing,

modifying, publishing, transferring, using or other-

wise disposing of the Software, in whole or in part,

directly or indirectly, in breach of this Agreement.

2. License Restrictions. You will not, or assist or direct

any third person to: (i) extract, separate, remove or

otherwise copy the Software; (ii) disassemble,

decompile, reverse engineer or otherwise convert

any part of the Software to source code or a

6. DISCLAIMER OF WARRANTIES. TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE LAW, HAR-

MAN PROVIDES THE SOFTWARE “AS IS” AND

WITHOUT WARRANTY. HARMAN DISCLAIMS ALL

COMMON LAW AND STATUTORY WARRANTIES AS

TO THE CONDITION, QUALITY, FITNESS, MAINTE-

NANCE AND USE OF THE SOFTWARE, INCLUDING

AND WITHOUT LIMITATION, THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR ANY PARTICU-

LAR PURPOSE OR NON-INFRINGEMENT OF THIRD

PARTY INTELLECTUAL PROPERTY RIGHTS. NO HAR-

MAN DEALER, AGENT OR EMPLOYEE IS AUTHOR-

IZED TO CREATE, MODIFY, EXTEND OR OTHERWISE

MAKE ANY WARRANTY ON BEHALF OF HARMAN.

human-perceivable form; (iii) adapt, modify or cre-

ate a derivative work of the Software; (iv) distrib-

ute, encumber, lease, rent, sell, transmit, transfer, or

otherwise dispose of the Software, in whole or in

part, except You may transfer the Software upon

and as an intact part of a permanent and permissi-

ble transfer of the Product; or (v) use the Software

with any other product or for any other purpose.

9. U.S. Government Restricted Rights. Use, duplication

and disclosure by the U.S. Government is subject to

restrictions set forth in this Agreement.

10. Export Restrictions. You will obey the laws and reg-

ulations of the United States governing exports and

re-exports of the Product and/or Software.

11. Governing Law. This Agreement shall be governed

by and construed in accordance with the substan-

tive laws of the state of New York, excluding all

applicable laws pertaining to conflicts of law and

the United Nations Convention on Contracts for the

International Sale of Goods.

3. Ownership of Software. The Software consists of

Harman’s proprietary software and software

obtained from third-party licensors. You acknowl-

edge that the Software is the sole property of

Harman and its licensors. Harman and its licensors

retain all rights, title and interest in and to the

Software, including any and all modifications,

updates, derivative works and all associated intel-

lectual property rights therein. Except as expressly

granted to You under the terms of this Agreement,

Harman does not grant You any right, title or inter-

est in or to the Software. You will not delete,

remove or otherwise alter any copyright, trade-

mark, confidentiality or other proprietary notice

appearing in the Software. You will not take any

action to jeopardize, limit or interfere in any man-

ner with Harman’s or its licensors’ ownership of the

Software. Harman reserves the sole and exclusive

right at its discretion to assert claims against third

parties for infringement or misappropriation of its

intellectual property rights in the Software.

7. LIMITATION OF LIABILITY. TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE LAW, IN NO

EVENT WILL HARMAN, INCLUDING ITS PARENT

COMPANY, AFFILIATES, EQUITY HOLDERS, DIREC-

TORS, OFFICERS, EMPLOYEES AND AGENTS, OR ITS

SUPPLIERS BE LIABLE TO YOU OR ANY THIRD-

PARTY FOR ANY INCIDENTAL, INDIRECT, SPECIAL,

REMOTE, EXEMPLARY, PUNITIVE OR CONSEQUEN-

TIAL DAMAGES, INCLUDING AND WITHOUT LIMI-

TATION, COSTS OF PROCUREMENT OF SUBSTI-

TUTE OR REPLACEMENT PRODUCTS, LOSS OF

INFORMATION, DATA OR CONTENT, LOSS OF REV-

ENUE OR PROFITS OR ATTORNEY’S FEES, ARISING

FROM OR CAUSED BY, DIRECTLY OR INDIRECTLY,

THE SALE OR USE OF OR INABILITY TO USE THE

SOFTWARE OR PRODUCT, REGARDLESS OF THE

FORM OF ACTION, WHETHER IN CONTRACT, TORT,

STRICT LIABILITY OR OTHERWISE AT LAW OR IN

EQUITY, EVEN IF HARMAN HAS BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITA-

TION SHALL BE EFFECTIVE EVEN IF ANY REMEDY

IN THIS AGREEMENT OR OTHERWISE PROVIDED BY

HARMAN FAILS OF ITS ESSENTIAL PURPOSE. TO

THE EXTENT PERMITTED BY APPLICABLE LAW, IN

NO EVENT WILL HARMAN’S TOTAL AND AGGRE-

GATE LIABILITY FOR ANY AND ALL CLAIMS UNDER

THIS AGREEMENT OR ARISING FROM THE SOFT-

WARE, REGARDLESS OF THE FORM OF ACTION,

WHETHER IN CONTRACT, TORT, STRICT LIABILITY

OR OTHERWISE, AT LAW OR IN EQUITY, EXCEED

THE PURCHASE PRICE OF THE PRODUCT.

12. Limitation of Transfer. The Software and this license

to use the Software is transferable, provided that:

(i) all Software updates are included in the transfer;

(ii) You do not retain

a copy of the Software; (iii) You transfer the

Software upon and as an intact part of a perma-

nent and permissible transfer of the Product; and

(iv) the transferee agrees to be bound by the terms

and conditions of this Agreement in connection

with the use of the Product. The terms and condi-

tions of this Agreement will bind and inure to the

benefit of such permitted transferees.

13. Survival. Sections 3, 4, 6, 7, 11 and 13 will survive

the termination and expiration of

this Agreement.

4. Termination. This Agreement is effective until termi-

nated by Harman. Your rights to use the Product

and Software will automatically terminate, with or

without notice, upon any violation or breach of this

Agreement by You, in which case you will immedi-

ately stop all use of the Product and Software..

14. Entire Agreement. This Agreement is the complete

and final agreement between You and Harman with

respect to the subject matter of this Agreement. To

the extent that any terms of any Harman policies or

programs for support services conflict with the

terms of this Agreement, the terms of this

Agreement shall control.

5. SEPARATE LIMITED WARRANTY. HARMAN OFFERS A

LIMITED WARRANTY TO YOU FOR YOUR USE OF

THE PRODUCT AS DEFINED BY THE HARMAN LIM-

ITED WARRANTY INCLUDED WITH THE PRODUCT

(“LIMITED WARRANTY”). THIS AGREEMENT DOES

NOT CONTAIN OR CONSTITUTE A NEW OR SEPA-

RATE WARRANTY REGARDING THE PRODUCT OR

15. Severability. If any court or other tribunal of compe-

tent jurisdiction finds or holds any

provision of this Agreement to be void, invalid, ille-

gal or otherwise unenforceable the remaining pro-

visions of this Agreement will remain in full force

and effect.

EULA 37

Download from Www.Somanuals.com. All Manuals Search And Download.

Eula

THE GRACENOTE SOFTWARE, EACH ITEM OF GRA-

CENOTE DATA AND THE MUZE CONTENT ARE

LICENSED TO YOU “AS IS.” NEITHER GRACENOTE

NOR MUZE MAKES ANY REPRESENTATIONS OR

WARRANTIES, EXPRESS OR IMPLIED, REGARDING

THE ACCURACY OF ANY GRACENOTE DATA FROM

THE GRACENOTE SERVERS OR MUZE CONTENT.

GRACENOTE AND MUZE COLLECTIVELY AND SEPA-

RATELY RESERVE THE RIGHT TO DELETE DATA

AND/OR CONTENT FROM THE COMPANIES’

RESPECTIVE SERVERS OR, IN THE CASE OF GRA-

CENOTE, CHANGE DATA CATEGORIES FOR ANY

CAUSE THAT GRACENOTE DEEMS SUFFICIENT. NO

WARRANTY IS MADE THAT EITHER MUZE CON-

TENT OR THE GRACENOTE SOFTWARE OR GRA-

CENOTE SERVERS ARE ERROR-FREE OR THAT THE

FUNCTIONING OF THE GRACENOTE SOFTWARE OR

GRACENOTE SERVERS WILL BE UNINTERRUPTED.

GRACENOTE IS NOT OBLIGATED TO PROVIDE YOU

WITH ANY ENHANCED OR ADDITIONAL DATA

TYPES THAT GRACENOTE MAY CHOOSE TO PRO-

VIDE IN THE FUTURE AND IS FREE TO DISCONTIN-

UE ITS ONLINE SERVICES AT ANY TIME. GRA-

CENOTE AND MUZE DISCLAIM ALL WARRANTIES

EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMIT-

ED TO, IMPLIED WARRANTIES OF MERCHANTABILI-

TY, FITNESS FOR A PARTICULAR PURPOSE, TITLE,

AND NON-INFRINGEMENT. NEITHER GRACENOTE

NOR MUZE WARRANTS THE RESULTS THAT WILL

BE OBTAINED BY YOUR USE OF THE GRACENOTE

SOFTWARE OR ANY GRACENOTE SERVER. IN NO

CASE WILL GRACENOTE OR MUZE BE LIABLE FOR

ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES

OR FOR ANY LOST PROFITS OR LOST REVENUES

2006

RANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE AND NONINFRINGEMENT.

IN NO EVENT SHALL THE AUTHORS OR COPY-

RIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAM-

AGES OR OTHER LIABILITY, WHETHER IN AN

ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION

WITH THE SOFTWARE OR THE USE OR OTHER

DEALINGS IN THE SOFTWARE.

16. Copyright Notices, Attributions and Licenses. Some

of Harman’s licensors require the reproduction of

certain copyright notices and authorship attribution

in Harman’s documentation. Such notices, attribu-

tions and licenses are as follows:

[email protected] The Software contained in

the Product uses the LAME software. LAME is

licensed to Harman and You under the GNU Lesser

General Public License – Version 2.1, see below for

license terms. Harman does not modify the LAME

software. For more information visit

Gracenote EULA

Gracenote and Muze® Terms of Use

This device contains software from Gracenote, Inc.

of 2000 Powell St. Emeryville, California 94608

(“Gracenote”) and may include portions of content

belonging to or licensed from Muze Inc. of 304

Hudson Street, New York, New York 10013

(“Muze”).

http://www.mp3dev.org.

Redistribution and use in source and binary forms,

with or without modification, are permitted provid-

ed that the following conditions are met: (1)

Redistributions of source code must retain the

above copyright notice, this list of conditions and

the following disclaimer; (2) Redistributions in bina-

ry form must reproduce the above copyright notice,

this list of conditions and the following disclaimer

in the documentation and/or other materials pro-

vided with the distribution; and (3) Neither the

name of the <ORGANIZATION> nor the names of

its contributors may be used to endorse or promote

products derived from this software without specific

prior written permission. THIS SOFTWARE IS PRO-

VIDED BY THE COPYRIGHT HOLDERS AND CON-

TRIBUTORS "AS IS" AND ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, BUT NOT LIM-

ITED TO, THE IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL

THE COPYRIGHT OWNER OR CONTRIBUTORS BE

LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAM-

AGES (INCLUDING, BUT NOT LIMITED TO, PRO-

CUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLI-

GENCE OR OTHERWISE) ARISING IN ANY WAY OUT

OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED

OF THE POSSIBILITY OF SUCH DAMAGE.

The software from Gracenote (the “Gracenote

Software”) enables this device to do disc and music

file identification and obtain music-related informa-

tion, including name, artist, track, and title informa-

tion (“Gracenote Data”) from online servers

(“Gracenote Servers”), and to perform other func-

tions. You may use Gracenote Data only by means

of the intended End User functions of this device.

You agree that you will use the content from Muze

(“Muze Content”), Gracenote Data, the Gracenote

Software, and Gracenote Servers for your own per-

sonal, non-commercial use only. You agree not to

assign, copy, transfer or transmit the Muze Content,

Gracenote Software or any Gracenote Data (except

in a Tag associated with a music file) to any third

party. YOU AGREE NOT TO USE OR EXPLOIT MUZE

CONTENT, GRACENOTE DATA, THE GRACENOTE

SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS

EXPRESSLY PERMITTED HEREIN.

17. Open Source. Certain libraries are licensed to You

under the terms of the GNU Lesser General Public

License, Version 2.1 (“GNU LGPL”). Harman is not

allowed to sub-license the GNU LGPL libraries to

You as You are deemed to have Your own direct

license from the original licensee. Harman does not

modify these libraries in any way. Harman hereby

offers to You, upon Your request and for the actual

costs of materials and shipping, all source code and

object code files for all GNU LGPL libraries con-

tained in the Software.

You agree that your non-exclusive licenses to use

the Muze Content, Gracenote Data, the Gracenote

Software, and Gracenote Servers will terminate if

you violate these restrictions. If your licenses termi-

nate, you agree to cease any and all use of the

Muze Content, Gracenote Data, the Gracenote

Software, and Gracenote Servers. Gracenote and

Muze, respectively, reserve all rights in Gracenote

Data, the Gracenote Software, and the Gracenote

Servers and Muze Content, including all ownership

rights. Under no circumstances will either

Gracenote or Muze become liable for any payment

to you for any information that you provide, includ-

ing any copyrighted material or music file informa-

tion. You agree that Gracenote and/or Muze may

enforce its respective rights, collectively or sepa-

rately, under this agreement against you, directly in

each company's own name.

18. GNU Lesser General Public License, Version 2.1,

February 1999

more information visit http://xmlsoft.org/.

Preamble: The licenses for most software are

designed to take away your freedom to share and

change it. By contrast, the GNU General Public

Licenses are intended to guarantee your freedom to

share and change free software – to make sure the

software is free for all its users. This license, the

Lesser General Public License, applies to some spe-

cially designated software packages – typically

libraries – of the Free Software Foundation and

other authors who decide to use it. You can use it

too, but we suggest you first think carefully about

whether this license or the ordinary General Public

License is the better strategy to use

Permission is hereby granted, free of charge, to any

person obtaining a copy of this software and asso-

ciated documentation files (the “Software”), to

deal in the Software without restriction, including

without limitation the rights to use, copy, modify,

merge, publish, distribute, sublicense, and/or sell

copies of the Software, and to permit persons to

whom the Software is furnished to do so, subject to

the following conditions: The above copyright

notice and this permission notice shall be included

in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS,” WITHOUT

WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO THE WAR-

Gracenote uses a unique identifier to track queries

for statistical purposes. The purpose of a randomly

assigned numeric identifier is to allow Gracenote to

count queries without knowing anything about

who you are. For more information, see the web

page at www.gracenote.com for the Gracenote

in any particular case, based on the explanations

below.

38 EULA

Download from Www.Somanuals.com. All Manuals Search And Download.

Eula

stitute a work based on the Library (independent of

the use of the Library in a tool for writing it).

Whether that is true depends on what the Library

does and what the program that uses the Library

does.

many libraries. However, the Lesser license provides

advantages in certain special circumstances. For

example, on rare occasions, there may be a special

need to encourage the widest possible use of a cer-

tain library, so that it becomes a de-facto standard.

To achieve this, non-free programs must be allowed

to use the library. A more frequent case is that a

free library does the same job as widely used non-

free libraries. In this case, there is little to gain by

limiting the free library to free software only, so we

use the Lesser General Public License. In other

cases, permission to use a particular library in non-

free programs enables a greater number of people

to use a large body of free software. For example,

permission to use the GNU C Library in non-free

programs enables many more people to use the

whole GNU operating system, as well as its variant,

the GNU/Linux operating system. Although the

Lesser General Public License is Less protective of

the users’ freedom, it does ensure that the user of

a program that is linked with the Library has the

freedom and the wherewithal to run that program

using a modified version of the Library. The precise

terms and conditions for copying, distribution and

modification follow. Pay close attention to the dif-

ference between a “work based on the library” and

a “work that uses the library.” The former contains

code derived from the library, whereas the latter

must be combined with the library in order to run.

When we speak of free software, we are referring

to freedom of use, not price. Our General Public

Licenses are designed to make sure that you have

the freedom to distribute copies of free software

(and charge for this service if you wish); that you

receive source code or can get it if you want it; that

you can change the software and use pieces of it in

new free programs; and that you are informed that

you can do these things.

1. You may copy and distribute verbatim copies of the

Library’s complete source code as you receive it, in

any medium, provided that you conspicuously and

appropriately publish on each copy an appropriate

intact all the notices that refer to this License and

to the absence of any warranty; and distribute a

copy of this License along with the Library.

To protect your rights, we need to make restrictions

that forbid distributors to deny you these rights or

to ask you to surrender these rights. These restric-

tions translate to certain responsibilities for you if

you distribute copies of the library or if you modify

it. For example, if you distribute copies of the

library, whether gratis or for a fee, you must give

the recipients all the rights that we gave you. You

must make sure that they, too, receive or can get

the source code. If you link other code with the

library, you must provide complete object files to

the recipients, so that they can relink them with the

library after making changes to the library and

recompiling it. And you must show them these

terms so they know their rights. We protect your

rights with a two-step method: (1) we copyright the

library, and (2) we offer you this license, which

gives you legal permission to copy, distribute

and/or modify the library. To protect each distribu-

tor, we want to make it very clear that there is no

warranty for the free library. Also, if the library is

modified by someone else and passed on, the

recipients should know that what they have is not

the original version, so that the original author’s

reputation will not be affected by problems that

might be introduced by others. Finally, software

patents pose a constant threat to the existence of

any free program. We wish to make sure that a

company cannot effectively restrict the users of a

free program by obtaining a restrictive license from

a patent holder. Therefore, we insist that any patent

license obtained for a version of the library must be

consistent with the full freedom of use specified in

this license. Most GNU software, including some

libraries, is covered by the ordinary GNU General

Public License. This license, the GNU Lesser General

Public License, applies to certain designated

libraries, and is quite different from the ordinary

General Public License. We use this license for cer-

tain libraries in order to permit linking those

libraries into non-free programs. When a program is

linked with a library, whether statically or using a

shared library, the combination of the two is legally

speaking a combined work,

a derivative of the original library. The ordinary

General Public License therefore permits such link-

ing only if the entire combination fits its criteria of

freedom. The Lesser General Public License permits

more lax criteria for linking other code with the

library. We call this license the “Lesser” General

Public License because it does Less to protect the

user’s freedom than the ordinary General Public

License. It also provides other free software devel-

opers Less of an advantage over competing non-

free programs. These disadvantages are the reason

we use the ordinary General Public License for

You may charge a fee for the physical act of trans-

ferring a copy, and you may at your option offer

warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Library or

any portion of it, thus forming a work based on the

Library, and copy and distribute such modifications

or work under the terms of Section 1 above, provid-

ed that you also meet all of these conditions:

a) The modified work must itself be a software

library; b) You must cause the files modified to carry

prominent notices stating that you changed the

files and the date of any change; and c) You must

cause the whole of the work to be licensed at no

charge to all third parties under the terms of this

License; and d) If a facility in the modified Library

refers to a function or a table of data to be sup-

plied by an application program that uses the facili-

ty, other than as an argument passed when the

facility is invoked, then you must make a good faith

effort to ensure that, in the event an application

does not supply such function or table, the facility

still operates, and performs whatever part of its

purpose remains meaningful. (For example, a func-

tion in a library to compute square roots has a pur-

pose that is entirely well-defined independent of

the application. Therefore, Subsection 2d requires

that any application-supplied function or table used

by this function must be optional: if the application

does not supply it, the square root function must

still compute square roots.)

Terms and Conditions for Copying, Distribution and

modification

0. This License Agreement applies to any software

library or other program which contains a notice

placed by the copyright holder or other authorized

party saying it may be

distributed under the terms of this Lesser General

Public License (also called “this License”). Each

licensee is addressed as “You.”

A “library” means a collection of software functions

and/or data prepared so as to be conveniently

linked with application programs (which use some

of those functions and data) to form executables.

The “Library,” below, refers to any such software

library or work which has been distributed under

these terms. A “work based on the Library” means

either the Library or any derivative work under

Library or a portion of it, either verbatim or with

modifications and/or translated straightforwardly

into another language. (Hereinafter, translation is

included without limitation in the term “modifica-

tion.”)

These requirements apply to the modified work as a

whole. If identifiable sections of that work are not

derived from the Library, and can be reasonably

considered independent and separate works in

themselves, then this License, and its terms, do not

apply to those sections when you distribute them

as separate works. But when you

distribute the same sections as part of a whole

which is a work based on the Library, the distribu-

tion of the whole must be on the terms of this

License, whose permissions for other licensees

extend to the entire whole, and thus to each and

every part regardless of who wrote it.

“Source code” for a work means the preferred form

of the work for making modifications to it. For a

library, complete source code means all the source

code for all modules it contains, plus any associat-

ed interface definition files, plus the scripts used to

control compilation and installation of the library.

Thus, it is not the intent of this section to claim

rights or contest your rights to work written entirely

by you; rather, the intent is to exercise the right to

control the distribution of derivative or collective

works based on the Library.

Activities other than copying, distribution and mod-

ification are not covered by this License; they are

outside its scope. The act of running a program

using the Library is not restricted, and output from

such a program is covered only if its contents con-

EULA 39

Download from Www.Somanuals.com. All Manuals Search And Download.

Eula

cutable from it. However, as a special exception,

the materials to be distributed need not include

anything that is normally distributed (in either

source or binary form) with the major components

(compiler, kernel, and so on) of the operating sys-

tem on which the executable runs, unless that com-

ponent itself accompanies the executable.

less in length), then the use of the object file is

unrestricted, regardless of whether it is legally a

derivative work. (Executables containing this object

code plus portions of the Library will still fall under

Section 6.)

In addition, mere aggregation of another work not

based on the Library with the Library (or with a

work based on the Library) on a volume of a stor-

age or distribution medium does not bring the

other work under the scope of this License.

Otherwise, if the work is a derivative of the Library,

you may distribute the object code for the work

under the terms of Section 6. Any executables con-

taining that work also fall under Section 6, whether

or not they are linked directly with the Library itself.

3. You may opt to apply the terms of the ordinary

GNU General Public License instead of this License

to a given copy of the Library. To do this, you must

alter all the notices that refer to this License, so

that they refer to the ordinary GNU General Public

License, version 2, instead of to this License. (If a

newer version than version 2 of the ordinary GNU

General Public License has appeared, then you can

specify that version instead if you wish.) Do not

make any other change in these notices.

It may happen that this requirement contradicts the

license restrictions of other proprietary libraries that

do not normally accompany the operating system.

Such a contradiction means you cannot use both

them and the Library together in an executable that

you distribute.

6. As an exception to the Sections above, you may

also combine or link a “work that uses the Library”

with the Library to produce a work containing por-

tions of the Library, and distribute that work under

terms of your choice, provided that the terms per-

mit modification of the work for the customer's

own use and reverse engineering for debugging

such modifications.

7. You may place library facilities that are a work

based on the Library side-by-side in a single library

together with other library facilities not covered by

this License, and

Once this change is made in a given copy, it is irre-

versible for that copy, so the ordinary GNU General

Public License applies to all subsequent copies and

derivative works made from that copy.

distribute such a combined library, provided that

the separate distribution of the work based on the

Library and of the other library facilities is otherwise

permitted, and

provided that you do these two things: a)

Accompany the combined library with a copy of the

same work based on the Library, uncombined with

any other library facilities.

This must be distributed under the terms of the

Sections above; and b) Give prominent notice with

the combined library of the fact that part of it is a

work based on the Library, and explaining where to

find the accompanying uncombined form of the

same work.

You must give prominent notice with each copy of

the work that the Library is used in it and that the

Library and its use are covered by this License. You

must supply a copy of this License. If the work dur-

ing execution displays copyright notices, you must

include the copyright notice for the Library among

them, as well as a reference directing the user to

the copy of this License. Also, you must do one of

these things: a) Accompany the work with the com-

plete corresponding machine-readable source code

for the Library including whatever changes were

used in the work (which must be distributed under

Sections 1 and 2 above); and, if the work is an exe-

cutable linked with the Library, with the complete

machine-readable “work that uses the Library,” as

object code and/or source code, so that the user

can modify the Library and then relink to produce a

modified executable containing the modified

Library. (It is understood that the user who changes

the contents of definitions files in the Library will

not necessarily be able to recompile the application

to use the modified definitions.); b) Use a suitable

shared library mechanism for linking with the

Library. A suitable mechanism is one that (1) uses

at run time a copy of the library already present on

the user's computer system, rather than copying

library functions into the executable, and (2) will

operate properly with a modified version of the

library, if the user installs one, as long as the modi-

fied version is interface-compatible with the version

that the work was made with; c) Accompany the

work with a written offer, valid for at least three

years, to give the same user the materials specified

in Subsection 6a, above, for a charge no more than

the cost of

This option is useful when you wish to copy part of

the code of the Library into a program that is not a

library.

4. You may copy and distribute the Library (or a por-

tion or derivative of it, under Section 2) in object

code or executable form under the terms of

Sections 1 and 2 above provided that you accom-

pany it with the complete corresponding machine-

readable source code, which must be distributed

under the terms of Sections 1 and 2 above on a

medium customarily used for software interchange.

If distribution of object code is made by offering

access to copy from a designated place, then offer-

ing equivalent access to copy the source code from

the same place satisfies the requirement to distrib-

ute the source code, even though third parties are

not compelled to copy the source along with the

object code.

8. You may not copy, modify, sublicense, link with, or

distribute the Library except as expressly provided

under this License. Any attempt otherwise to copy,

modify, sublicense, link with, or distribute the

Library is void, and will automatically terminate

your rights under this License. However, parties

who have received copies, or rights, from you under

this License will not have their licenses terminated

so long as such parties remain in full compliance.

5. A program that contains no derivative of any por-

tion of the Library, but is designed to work with the

Library by being compiled or linked with it, is called

a “work that uses the Library.” Such a work, in iso-

lation, is not a derivative work of the Library, and

therefore falls outside the scope of this License.

9. You are not required to accept this License, since

you have not signed it. However, nothing else

grants you permission to modify or distribute the

Library or its derivative works. These actions are

prohibited by law if you do not accept this License.

Therefore, by modifying or distributing the Library

(or any work based on the Library), you indicate

your acceptance of this License to do so, and all its

terms and conditions for copying, distributing or

modifying the Library or works based on it.

However, linking a “work that uses the Library”

with the Library creates an executable that is a

derivative of the Library (because it contains por-

tions of the Library), rather than a “work that uses

the library.” The executable is therefore covered by

this License. Section 6 states terms for distribution

of such executables.

10. Each time you redistribute the Library (or any work

based on the Library), the recipient automatically

receives a license from the original licensor to copy,

distribute, link with

When a “work that uses the Library” uses material

from a header file that is part of the Library, the

object code for the work may be a derivative work

of the Library even though the source code is not.

Whether this is true is especially significant if the

work can be linked without the Library, or if the

work is itself a library. The threshold for this to be

true is not precisely defined by law.

performing this distribution; d) If distribution of the

work is made by offering access to copy from a

designated place, offer equivalent access to copy

the above specified materials from the same place;

and e) Verify that the user has already received a

copy of these materials or that you have already

sent this user a copy.

or modify the Library subject to these terms and

conditions. You may not impose any

further restrictions on the recipients’ exercise of the

rights granted herein. You are not responsible for

enforcing compliance by third parties with this

License.

For an executable, the required form of the “work

that uses the Library” must include any data and

utility programs needed for reproducing the exe-

If such an object file uses only numerical parame-

ters, data structure layouts and accessors, and

small macros and small inline functions (ten lines or

40 EULA

Download from Www.Somanuals.com. All Manuals Search And Download.

Eula

14. If you wish to incorporate parts of the Library into

other free programs whose distribution conditions

are incompatible with these, write to the author to

ask for permission. For software which is copyright-

ed by the Free Software Foundation, write to the

Free Software Foundation; we sometimes make

exceptions for this. Our decision will be guided by

the two goals of preserving the free status of all

derivatives of our free software and of promoting

the sharing and reuse of software generally.

11. If, as a consequence of a court judgment or allega-

tion of patent infringement or for any other reason

(not limited to patent issues), conditions are

imposed on you (whether by court order, agree-

ment or otherwise) that contradict the conditions of

this License, they do not excuse you from the condi-

tions of this License. If you cannot distribute so as

to satisfy simultaneously your obligations under this

License and any other pertinent obligations, then as

a consequence you may not distribute the Library at

all. For example, if a patent license would not per-

mit royalty-free redistribution of the Library by all

those who receive copies directly or indirectly

through you, then the only way you could satisfy

both it and this License would be to refrain entirely

from distribution of the Library.

NO WARRANTY

15. BECAUSE THE LIBRARY IS LICENSED FREE OF

CHARGE, THERE IS NO WARRANTY FOR THE

LIBRARY, TO THE EXTENT PERMITTED BY APPLICA-

BLE LAW. EXCEPT WHEN OTHERWISE STATED IN

WRITING THE COPYRIGHT HOLDERS AND/OR

OTHER PARTIES PROVIDE THE LIBRARY “AS IS”

WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESSED OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. THE ENTIRE RISK AS TO THE QUALITY

AND PERFORMANCE OF THE LIBRARY IS WITH

YOU. SHOULD THE LIBRARY PROVE DEFECTIVE,

YOU ASSUME THE COST OF ALL NECESSARY SERV-

ICING, REPAIR OR CORRECTION.

If any portion of this section is held invalid or unen-

forceable under any particular

circumstance, the balance of the section is intended

to apply, and the section as a whole is intended to

apply in other circumstances.

It is not the purpose of this section to induce you to

infringe any patents or other property right claims

or to contest validity of any such claims; this section

has the sole purpose of protecting the integrity of

the free software distribution system which is

implemented by public license practices. Many peo-

ple have made generous contributions to the wide

range of software distributed through that system

in reliance on consistent application of that system;

it is up to the author/donor to decide if he or she is

willing to distribute software through any other sys-

tem and a licensee cannot impose that choice.

16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE

LAW OR AGREED TO IN WRITING WILL ANY COPY-

RIGHT HOLDER, OR ANY OTHER PARTY WHO MAY

MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS

PERMITTED ABOVE, BE LIABLE TO YOU FOR DAM-

AGES, INCLUDING ANY GENERAL, SPECIAL, INCI-

DENTAL OR CONSEQUENTIAL DAMAGES ARISING

OUT OF THE USE OR INABILITY TO USE THE

This section is intended to make thoroughly clear

what is believed to be a consequence of the rest of

this License.

LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS

OF DATA OR DATA BEING RENDERED INACCU-

RATE OR LOSSES SUSTAINED BY YOU OR THIRD

PARTIES OR A FAILURE OF THE LIBRARY TO OPER-

ATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH

HOLDER OR OTHER PARTY HAS BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES.

12. If the distribution and/or use of the Library is

restricted in certain countries either by patents or

by copyrighted interfaces, the original copyright

holder who places the Library under this License

may add an explicit geographical distribution limi-

tation excluding those countries, so that distribu-

tion is permitted only in or among countries not

thus excluded. In such case, this License incorpo-

rates the limitation as if written

in the body of this License.

13. The Free Software Foundation may publish revised

and/or new versions of the Lesser General Public

License from time to time. Such new versions will

be similar in spirit to the present version, but may

differ in detail to address new problems or con-

cerns.

Each version is given a distinguishing version num-

ber. If the Library specifies a version number of this

License which applies to it and “any later version,”

you have the option of following the terms and

conditions either of that version or of any later ver-

sion published by the Free Software Foundation. If

the Library does not specify a license version num-

ber, you may choose any version ever published by

the Free Software Foundation.

EULA 41

Download from Www.Somanuals.com. All Manuals Search And Download.

250 Crossways Park Drive, Woodbury, New York 11797

www.harmankardon.com

Harman Consumer Group, Inc.:

2, Route de Tours, 72500 Château-du-Loir, France

Partnumber: 25A08G-0DMC0-Q00

Download from Www.Somanuals.com. All Manuals Search And Download.

Graco High Chair 1762138 User Manual
Grundig Radio Sonoclock 890 WEB User Manual
Harbor Freight Tools Air Compressor 92720 User Manual
Harbor Freight Tools Log Splitter 65761 User Manual
Hotpoint Dishwasher HDA130S User Manual
Hotpoint Dishwasher HDA3700G User Manual
HP Hewlett Packard Network Card 8753ES User Manual
HP Hewlett Packard Personal Computer DC7100 User Manual
IBM Laptop T21 User Manual
Impex Home Gym TR 2 User Manual