19Inch (Viewable size 18 )
High Resolution Color Monitor
(B19BL)
Printed on the recyclable paper
Printed in Korea
Part No. 942149060001 - 02
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Introduction
Caution
Features
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
19-inch(18 inch visual)high performance display color monitor
Warning
Automatically scans frequencies from
- Horizontal frequency: 30 to 96KHz
- Vertical frequency: 47 to 150Hz
If this equipment has more than one interface connector, do not leave cables connected to
unused interfaces.
Canadian Notice
This Class B digital apparatus meets all requirements of the Cannadian Interference Causing
Equipment Regulations.
Compatible with VGA, SVGA, VESA, MAC Standards and maximum resolution modes up to
1600 1200.
Avis Canadien
Supports VESA flicker free modes including 85Hz refresh rate.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
On Screen menu fingertip control system to visually select and adjust screen images using
6 buttons on front panel and on screen menus.
Notice
The information contained in this document is subject to change without notice.
Power supply operates on AC100~240Volt 60/50Hz for use all over the world.
Equipped with DDC 1/2B for Plug & Play capability.
Package
First, we would like to thank you for your purchase of this monitor. This monitor is 19inch, high
resolution, color display monitor. This manual covers the use, and points of caution, when
operating this monitor.
Please take the time to read this manual so that you will obtain the best performance and most
use from your monitor. After reading the manual, store it in a safe place for future reference.
Equipped with an energy-saving feature.
Power management circuit when signaled by the computer system, will reduce power
consumption when the computer system is not in use.
Monitors with nonglare/antistatic screens are compliant with MPR
1990 Emissions standards and meets requirements for CE Marking.
TCO : (option)
This items illustrated below are contained in the carton.
First, be sure that your carton includes the following items.
If any items are missing or damaged, please contact your local dealer or supplier.
B19AL
- Color Monitor
- AC Power input cable
- User’s Manual (Warranty Registration Card)
- Signal Cable (15pin 3layer D-sub)
4
User’s Manual
User’s Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Introduction
Safety information
Power management system
Provided with this monitor is a detachable power supply cord with IEC320 style terminations.
This monitor meets VESA(Video Electronics Standards Association) DPMS(Display Power
Management Signalling)standards. In order for the monitor s power saving feature to function,
the video board or computer must also meet VESA DPMSTM standards.
It may be suitable for connection to any UL listed personal computer with similar
configuration. Before making the connection ensure that the voltage rating of the computer
convenience outlet is the same as the monitor and that the ampere rating of the computer
convenience outlet is equal to or exceeds the monitor current rating.
For 120Volt applications use only UL listed detachable power cord with NEMA configuration
5-15P type(parallel blades) plug cap.
®
Power management table
Power saving function mode
State
Normal
Operation
Sync
Standby
Inactive
Active
Suspend Mode Power-Off Mode
For 240Volt applications use only UL listed detachable power cord with NEMA configuration
6-15P type(tandem blades) plug cap.
Horizontal
Active
Active
Active
Green
Active
Inactive
Blanked
AMBER
Less than
15W
Inactive
Inactive
Blanked
Vertical
Video
Blanked
LED Color
Power
Consumption
Green/AMBER
Less than
80% of MAX
AMBER Blinking
Less than
8W
Use only a power source and connection appropriate for the monitor as indicated on the
marking label.
120W
Slots and openings in the cabinet are provided for ventilation;
these openings must not be blocked or covered. Never push objects of any kind into cabinet
slots or other openings.
Note : The monitor automatically goes through the DPMS steps when it is idle.
To release the monitor from the DPMS condition, press any key on the keyboard.
Never insert anything metallic into the monitor openings.
Doing so may create a danger of electric shock.
Connection to your computer
CAUTION
To avoid electric shock, never touch the inside of the monitor.
Only a qualified technician should open the monitor s case.
Ensure that both the PC and the display monitor are switched off.
To attach the monitor to your system, as shown in
the following illustrations.
Unplug the monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp, lint-free cloth for cleaning.
1. Connect the signal cable to the 15pin
graphics connector of the system and tighten
the fastening screws.
Install the monitor near an outlet that you can reach easily. Disconnect the product by
grasping the plug firmly and pulling in from the outlet.
Never disconnect it by pulling the cord.
2. Insert the AC power cord into monitor and
then into an AC power outlet.
3. To turn on the monitor, push the power switch.
Note : To attach the monitor to the Macintosh system, please contact an authorized
dealer.(Need to use a special adaptor)
6
User’s Manual
User’s Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Controls
Additional up front controls
Power Switch : Turns the monitor power on or off, When the power is on, the LED is lit.
Pin assignment table D-Sub Mini 15pin connector
1
5
Pin No.
15 Pin D-Sub
Red Video
Green Video
Blue Video
Frame Ground
N.C
Macintosh
Red Ground
Red Video
H/V Sync
Sense (0)
Green Video
Green Ground
Sense (1)
N.C
1
2
Accessing on screen menu
Press DO Button.
10
6
3
Controls
Controls
: Direct Brightness access.
: Direct Contrast access.
4
5
11
15
6
Red Ground
Green Ground
Blue Ground
N.C
Turning off on screen menu
(15 Pin D-Sub)
7
When in the main menu, press exit button.
When in submenus, press the exit button twice.
8
1
8
9
Blue Video
Sense (2)
Ground
10
11
12
13
14
15
Sync. Ground
Ground
OSD Menus
Main Menu
SDA
V-Sync.
H-Sync.
Blue Ground
Ground
9
15
V-Sync.
“ON SCREEN MENU”s Main Menu of Controls gives you an overview of the selection of controls
available.
SCL
H-Sync.
(Macintosh Adaptor)
CONTRAST
Function of controls
OSD Controls
“ON SCREEN MENU” controls include the following extended controls such as Size, Position,
Geometry Distortion, Color temp, Degauss, Moire on & off, Language, OSD-Position, Recall,
Cont & Brt, etc.
OSD
EXIT
DO
50 %
Use the
or
: Control buttons to scroll through all of the menus.
Function of OSD buttons on the front of the monitor
DO : In the main menu, proceeds to the selected menu .
In a submenu, proceeds to the control in that sub-menu.
Main Menu control guide
EXIT : Exit the OSD controls.
Controls
Controls
: Move the function to select one of the controls.
: In the main menu, moves the fuction to select one of the controls.
In a submenu, moves the bar in the or direction to increase or
decrease the adjustment.
Controls
Controls
: Move the function to choose.
: Move the function to choose.
DO : Proceed to the selected menu choice.
EXIT : In the main menu, exit the OSD controls. In a submenu, exit to the OSD main menu.
8
User’s Manual
User’s Manual
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Controls
Geometry Controls Menu
Contrast & Brightness Menu
31.5KHz
60Hz
31.5KHz
60Hz
PP
PP
GEOMETRY
PINCUSHION
PARALLELOGRAM
TRAPEZOID
CONTRAST
BRIGHTNESS
The Geometry controls allow you to adjust the
curvature or angle of displayed image.
PINBALANCE
TOP CORNER
BOTTOM CORNER
ROTATION
50%
50%
50%
EXIT : Exit the Brightness or Contrast menu.
Cursor
Cursor
: Increase or decrease the Brightness
: Increase or decrease the Contrast.
Pincushion : Increase or decrease the curvature of the sides either inward or outward.
Parallelogram : Increase or decrease the tilt of the sides either to the left or right.
Trapezoid : Increase or decreases the bottom of the screen to be the same as the top.
Pin Balance : Increase or decrease the curvature of the sides.
Position Menu
Top Corner : Increase or decreases the curvature of the top sides.
POSITION
Bottom Corner : Increase or decrease the curvature of the bottom sides.
Rotation : Rotate the entire display clockwise or counterclockwise.
: Move the image vertically up or down.
: Move the image horizontally left or right.
Geometry Menu Control Guide
PRESS
KEY
EXIT : Exite to the main menu.
Controls
Controls
: Move the function to choose.
: Move the bar in the or direction to increase or decrease the
adjustment.
Size Menu
SIZE
Language Menu
: Increase or decrease the vertical size of the
image.
LANGUAGE
: Increase or decrease the horizontal size of the
image.
ENGLISH
: Select the language using
key.
DEUTSCH
FRANCAIS
ESPAÑOL
PORTUGUÊS
PRESS
KEY
PRESS DO KEY
Position and Size Menu control guide
EXIT : Exit to the main menu.
Moire Control
Controls
Controls
: Refer to Tall/Short (or
)
: Refer to Narrow/Wide (or
)
MOIRE CONTROL
DO : Toggle position and size menu directly.
: Select the H.Moire or V.Moire Adjust.
: Adjust the Moire
H. MOIRE ADJUST
V. MOIRE ADJUST
50%
10
User’s Manual
User’s Manual
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Troubleshooting
OSD Position Menu
Troubleshooting guide
POSITION
: Moves the OSD Position vertically up or down.
: Moves the OSD Position horizontally left or
right.
If your monitor is not performing properly, please use the following troubleshooting chart for
quick solutions to common problems.
PRESS
KEY
Problem
Possible cause
Remedy
Is the power cord connected?
Connect power cord.
Color Adjust Controls Menu
Is the power switch on?
Turn on power switch.
COLOR - TEMP
Is the signal cable properly
connected?
Connect signal cable properly
No Picture
RB GB BB RG GG BG
OSD
USER
50%
Is the monitor in the power save
mode?
Press any key on the keyboard or
move the mouse.
USER
6500K
9300K
EXIT : Exit to the main menu.
Is the signal cable properly
connected?
Connect signal cable properly
Controls
Controls
: Increase or decrease the Selected color adjustment.
: Move the bar in the or direction to select the color setting
(USER, 6500K, 9300K).
Are there signals which are
outside of the required frequency
range?
Input signals which are within the
range of the monitor.
Picture is
unstable
DO : Proceed to the selected Submenu choice (Press DO button for 5 seconds).
Presetting : Select the desired color setting. The bar is replaced by the color setting choice
“USER, 6500K or 9300K” Each color setting is adjusted at user mode to choose
degree or Kelvin.
Is the signal connector pin
assigments correct?
Use correct signal connector.
Are there signals which are
outside of the required frequency
range?
Use correct signal which within the
frequency range of the monitor(If
the signal is correct, adjust the
controls to desired image.)
Controls
ICON
Function
The display
image is not
centered, too
small or large.
Information
This control shows the Factory and user mode
information.
This control allows the video input level selection applied
by signal source. (0.7Vp-p/1.0Vp-p)
This control allows the video input type selection.
(BNC/D-SUB)
This control removes the build-up of magnetic fields that
can affect color purity and convergence.
Note : The picture shakes while degaussing is taking
place. After internal degaussing the circuitry takes about
30 minutes to regain its maximum power.
This controls recalls certain factory setting such as size,
position, geometry and color by pressing DO button.
If the monitor is operation in a user mode, this controls
has no effect.
Video Level
D-Sub/BNC
Degauss
Is the magnetic object nearby?
Move object far away.
The color of
image on screen
is abnormal.
Is the pin arrangement of the
signal connector correct?
Use correct signal cable.
Use degauss control.
Recall
Zoom Menu
: Increase or decrease the Vertical and Horizontal size
of image at the same time.
12
User’s Manual
User’s Manual
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Appendix
Preset Timings
Electrical Specifications
ITEM
B19AL
This Monitor B19AL has preset modes for the 14 most popular industry standards for Plug and
Play capability.
CRT Type
19 , 90 deflection, FST
0.26mm (0.22 in Hor.)
CRT Dot pitch
CRT Surface
Horizontal
Vertical
Non-glare, ARASC
H/V Separate, TTL, positive/negative
H/V Composite, TTL, positive/negative
RGB Analog (0.7Vp-p), positive
75 Terminated
Video
Sync
Video
Sync
Sync
Input
Signal
Video
Horizontal
Scanning
30KHz~96KHz (Automatically)
47Hz~150Hz (Automatically)
1600Dots 1200Lines (Non-interlace)
202.5 MHz
frequency
Vertical
Maximum Resolution
Pixel Clock(Max.)
Display Size (Standard)
Power Consumption
Power Supply
Resolution
IBM
VESA
800/75Hz
VGA/70Hz VGA/60Hz
640/75Hz
640/85Hz
800/85Hz 1024/75Hz
800 600 1024 768
Horizontal 350mm, Vertical 262mm
120 W
Timing
720 400
31.469
31.777
3.813
1.907
25.422
0.636
70.09
14.268
0.064
1.08
12.711
0.413
640 480 640 480 640 480 800 600
H-Freq
A sec
B sec
C sec
D sec
E sec
V-Freq
Omsec
Pmsec
Qmsec
Rmsec
Smsec
Pixel rate
H-Polarity
V-Polarity
31.469
31.777
3.813
1.907
25.422
0.636
59.94
16.684
0.064
1.048
15.253
0.318
37.5
26.667
2.032
3.81
20.317
0.508
75
13.333
0.08
0.427
12.8
43.269
23.111
1.556
2.222
17.778
1.556
85.008
11.764
0.069
0.578
11.093
0.023
46.875
21.333
1.616
3.232
16.162
0.323
75
13.333
0.064
0.448
12.8
53.674
18.631
1.138
60.023
16.660
1.219
AC 100~240Volt 50/60Hz 3Hz
D-Sub, 15Pin Connectors
Unlimited
Input Connector
2.702
2.235
14.222
0.569
13.003
0.203
Display Colors
85.061
11.756
0.056
75.029
13.328
0.050
Mechanical Specifications
0.503
0.466
ITEM
B19AL
11.179
0.019
12.795
0.017
18.5 (W) 18.9 (D) 18.5 (H)
470mm(W) 487mm(D) 470mm(H)
21.6 (W) 22.6 (D) 22.4 (H)
548mm(W) 574mm(D) 568mm(H)
23.1Kg (50.9Ibs)
0.027
31.500
Negative
Negative
0.021
49.5
Unit
Dimension
28.322
Negative
Positive
25.175
Negative
Negative
36
Negative
Negative
56.25
Positive
Positive
78.750
Positive
Positive
Positive
Positive
Carton
Resolution
VESA
MACINTOSH
832/75Hz 1152/75Hz
832 624 1152 870
49.726
20.11
Net
1024/85Hz 1280/75Hz 1280/85Hz 1600/75Hz 640/67Hz
1024 768 1280 1024 1280 1024 1600 1200 640 480
Weight
Gross
Timing
28.1Kg (61.9Ibs)
H-Freq
A sec
B sec
C sec
D sec
E sec
V-Freq
Omsec
Pmsec
Qmsec
Rmsec
Smsec
Pixel rate
H-Polarity
V-Polarity
68.677
14.561
1.016
2.201
10.836
0.508
84.997
11.765
0.044
0.524
11.183
0.015
79.976
12.504
1.067
1.837
9.481
91.146
10.971
1.016
93.75
10.667
0.948
1.501
7.901
35
68.681
14.560
1.280
1.440
11.520
0.320
75.062
13.322
0.044
0.568
12.667
0.044
28.571
2.116
3.175
21.164
2.116
66.667
15
0.086
1.114
13.714
0.086
30.24
Negative
Negative
1.117
3.91
Environmental Specifications
1.422
8.127
0.406
14.524
0.559
74.551
13.414
0.06
0.784
12.549
0.02
ITEM
B19AL
0.119
0.316
75.025
13.329
0.038
0.475
12.804
0.013
135
Positive
Positive
85.024
11.761
0.033
75.000
13.333
0.032
0.491
12.800
0.011
202.5
Positive
Positive
Operating
Temperature
32 F to 104 F (0 C to 40 C)
-4 F to 140 F (-20 C to 60 C)
10% to 85% R.H. Non-condensing
Storage
Humidity
0.579
11.235
0.011
94.5
Positive
Positive
157.5
57.284
Negative
Negative
100
Negative
Negative
Positive
Positive
14
User’s Manual
User’s Manual
15
Download from Www.Somanuals.com. All Manuals Search And Download.
|