Haier Flat Panel Television P42LV6 T1 User Manual

PLASMA TV  
OWNER`S MANUAL  
MODELS:P42LV6-T1  
P50V6-A8  
Please READ this manual carefully before  
operating your TV, and retain it for future  
reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
Important safeguards for you and your new product  
Your product has been manufactured and tested with your safety in mind. However, improper  
use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have  
been built into your new product, please read and observe the following safety points when  
installing and using your new product, and save them for future reference.  
1. Retain these Instructions ---The safety and operating instructions should be retained for  
Future reference.  
2. Heed Warnings ---All warning on the appliance and in the operating instructions should be  
followed.  
3.Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid cleaners or  
Aerosol cleaners. Use only dry cloth for cleaning.  
4. Attachments --- Do not use attachments  
not recommended by the manufacturer as they may cause Hazards.  
5. Water and moisture -- Do not place this product near water, for example, near a bathtub,  
wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.  
6. Do not place this unit on an unstable cart, stand, tripod, bracket, or table. Use  
only with a cart, stand, tripod, bracket, or table recommend by the manufacture, or sold with  
the unit.  
7. Ventilation ---Slots and openings in the cabinets and the back or bottom are provided for  
Ventilation and to ensure reliable operation of the product and to protect it from overheating,  
and these openings must not be blocked or covered. The openings should never be  
blocked by placing the product on a bed, sofa, rug, or other similar surface. This product  
should not be placed in a built-in installation such as a bookcase or rack unless proper  
ventilation is provided or the manufacturer`s instructions have been adhered to.  
8. Power Source ---This unit should be operated only from the type of power source indicated on  
the rating label. If you are not sure of the type of power supply to your home, consult your  
Appliance dealer or local power company.  
9. Grounding or polarization ---Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades with one wider than the other. A  
grounding type plug has two blades and a third grounding prong. The wide blade or the third  
prong are provided for your safety. If the provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet. To prevent electric shock, ensure the  
Grounding pin on the AC cord power plug is securely connected.  
10. Power cord protection ---Power supply cords should be routed so that they are not likely to  
Be walked on or pinched by items placed upon or against them. Pay particular attention to  
cords or plugs, convenience receptacle, and the point where they exit from the appliance.  
11. Lighting precaution ---For added protection for this product during a lighting storm or when  
it is left unattended for long period of time, unplug it from the wall outlet and disconnect the  
antenna or cable system. This will prevent damage to the product due to lighting and  
power line surges.  
PORTABLE CARTWARNING  
12. Accessories--- Never push objects of anykind into this product through  
(symbol provided by RETAC)  
openings as they may touchdangerous voltage point or shortout parts  
that could result in afire or electric shock.Avoid spilling liquid of any kind  
on the product.  
13. Servicing ---Do not attempt to service the product by yourself, as opening  
or removing covers may expose you to dangerous voltage or other hazards.  
Refer all servicing to authorized service personnel.  
S3126A  
14.Damage Requiring Service ---Unplug this unit from the wall outlet and  
refer servicing to qualified service personnel under the Following conditions:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
a. When the power supply cord or plug is damaged or frayed.  
b. If liquid has been spilled, or objects have been fallen into the unit.  
c. If the unit has been exposed to rain or water.  
d. If the unit does not operate normally by following the operating instructions. Adjust only  
those controls that are covered by the operating instructions, as improper adjustment of  
other controls may result in damage and will often require extensive work by a qualified  
technician to restore the unit to its normal operation.  
e. If the unit has been dropped or damaged in any way.  
f. When the unit exhibits a distinct change in performance; this indicates a need for service.  
15.Heat --- The product should be situated away heat source such as radiators, heat registers,  
stoves, or other products (Including amplifiers) that product heat.  
16.Overloading ---Do not overload wall outlets and extension cord as this can result in a risk of  
Fire or Electric shock.  
17. Outdoor antenna grounding---If an outside antenna or cable system is connected to  
the unit, be sure the antenna or cable system is grounded to provide some protection  
against voltage surges and built-up static charges, Section 810 of the National Electrical  
Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and  
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of  
grounding conductors, location of antenna discharge unit, connection to grounding  
electrodes, and requirements for the grounding electrode.  
GROUND CLAMP  
ANTENNA LEAD IN WIRE  
ANTENNA DISCHARGE UNIT  
(NEC SECTION 810-20)  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
ELECTRIC SERVICE EQUIPMENT  
POWER SERVICE GROUNDING ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
Note: The PDP Manufacturing Process: afew minute coloreddots may be  
present on thePDP screen  
The PDP (Plasma Display Panel), which is thedisplay device ofthis  
product is composedof 0.9 to2.2 million cells. A few cell defectswill normally  
occur in thePDP manufacturing process. Several tiny, minute coloreddots  
visible on thescreen should beacceptable. This alsooccurs in otherPDP  
manufacturers' products. Thetiny dots appearingdoes not meanthat this  
PDP is defective. Thus afew cell defectsare not sufficientcause for thePDP  
to be exchangedor returned. Ourproduction technology minimizesthese cell  
defects during themanufacture and operationof this product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
1
Warning .............................................  
Sound menu..............................................  
To choose sound modes ..........................  
Balance.................................................  
26  
26  
26  
2
Important Safety Instructions................  
5
buttons and interfacelocation..............  
5
Front control panel............................  
Setting Five Equalizer sound ...................  
27  
6
Rear control panel.............................  
Setting the surround sound ......................  
Setting the Auto Volume...........................  
Setting the woofer sound.........................  
How to eliminate sound ...........................  
Timer menu...............................................  
Timer setting .........................................  
On/off time\Timer on Prog\Timer Prog ......  
27  
28  
28  
28  
29  
29  
30  
7
Remote controller................................  
8
Keys of remote controller......................  
8
Function introduction ........................  
9
10  
Effective range ...............................  
External Equipment Connections........  
Operation  
15  
15  
15  
16  
17  
14  
18  
19  
20  
Set up your TV...................................  
Switching ON/OFF theTV set...........  
Choose the MenuLanguage.............  
Select input modes............................  
Tuning menu......................................  
Auto search.....................................  
Program Table ....... ........................  
Manual search................................  
Fine Tuning.....................................  
Function menu...........................................  
31  
Function setup .......................................  
31  
Adjust menu .............................................  
To choose picture aspect ration ...............  
H-Position and V-Position adjust .............  
33  
33  
34  
RGB/Default/Auto Sync ..........................  
35  
Color Temperature .................................  
35  
Black Stretch .........................................  
35  
Lock setup.................................................  
36  
How to select the desired program....... 21  
Picture in Picture .......................................  
Other functions.........................................  
Teletext functions......................................  
Maintenance............................................  
Specifications and functions.......................  
Troubleshooting........................................  
39  
40  
42  
44  
45  
46  
Edit Name.......................................  
Skip...............................................  
Program swap.................................  
Picture menu ....................................  
How to select picture modes............  
Noise Reduction .............................  
22  
23  
23  
24  
24  
24  
Accessories  
MUTE  
STILL  
SCAN  
SLEEP  
PIP  
DISPLAY  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
POR&  
STUV  
*#()  
WXYZ  
TV/AV  
SWAP  
P.STD  
S.STD  
CH+  
MENU  
CH-  
VOL-  
VOL+  
H.LOCK  
EXIT  
CH.LIST  
T
I
M
E
R
Z
O
O
M
Power cable  
User's manual  
Alkaline battery(AA)  
2
Remote controller  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buttons and interface location  
-This is a simplified representation of front panel.  
-Here shown maybe somewhat different from yourTV.  
Front control panel  
P42LV6-HD  
1.EXIT:  
clears all on-screen displays and returns to TV  
viewing from any menu.  
2.INPUT:Source input select  
3.CH- /CH+  
Program plus and minus, menu options  
4.VOL-/VOL+  
Volume increase and decrease, menu  
reset and entry  
5.MENU  
Menu display  
6. Power  
7.Remote control signal receive window.  
8.Remote Indicator  
In red when standby mode, in blue when  
Display.  
P50V6-A8  
1.VIDEO input  
2.L-AUDIO-R left and right audio input.  
3.EXIT: clears all on-screendisplays and  
returns to TV viewing fromany menu.  
4.INPUT: Source input select.  
5. CH- /CH+: Program plus and minus,  
menu options.  
6. VOL-/VOL+: Volume increaseand  
decrease, menu resetand entry  
7.MENU: Menu display  
8. Power  
1
2
4
7
8
3
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buttons and interface location  
Rear Control panel  
P42LV6-HD  
VGA IN  
COMPONENT IN  
DVI IN  
L
R
SWITCH  
AC-INPUT  
SCART2  
SCART1  
VGA  
AUDIO  
Pr/Cr  
Pb/Cb  
Y
L-AUDIO-R  
HDMI/DVI VIDEO  
AUDIO  
ANT IN  
AUDIO OUT  
1. AUDIO OUT: Connect to optionalexternal speaker(s).  
2.VGA IN(PC)  
Connect VGA analog cable from the PC tothe VGA IN. Connect the audio cable from the PC  
to the VGAAUDIO IN.  
3.COMPONENT IN  
Connect the component cables from the component output of the video device to  
COMPONENT IN. Connect the audio cable from the video device to the  
COMPONENT AUDIOIN.  
4.DVI IN(HDMI-IN)  
Connect the HDMI cable from the HDMI output of the digital video device to the HDMI/DVI  
VIDEO.(If the PChas DVI only,Connect the audio cable from the digital video device to the  
AUDIO .)  
5-6.SCART2/SCART1  
Used to connect to the DVD/ VCR/ broadcasting receiver or other equipment.  
7.Earphone port  
8.ANT IN: Connect antenna orCATV 75 coaxial cable toreceive TV/CATV signal.  
9. SWITCH and AC INPUT: Power switchand AC power input.  
P50V6-A8  
VGA IN  
COMPONENT IN  
DVI IN  
SWITCH  
SCART2  
SCART1  
VGA  
AUDIO  
Pr/Cr  
Pb/Cb  
Y
L-AUDIO-R  
HDMI/DVI VIDEO  
AUDIO  
ANT IN  
AC-INPUT  
1.VGA IN(PC)  
Connect VGA analog cable from the PC tothe VGA IN. Connect the audio cable from the PC  
to the VGAAUDIO IN.  
2.COMPONENT IN  
Connect the component cables from the component output of the video device to  
COMPONENT IN. Connect the audio cable from the video device to the  
COMPONENT AUDIO IN.  
3.DVI IN(HDMI-IN)  
Connect the HDMI cable from the HDMI output of the digital video device to the HDMI/DVI  
VIDEO.(If the PChas DVI only,Connect the audio cable from the digital video device to the  
AUDIO .)  
4-5.SCART2/SCART1  
Used to connect to the DVD/ VCR/ broadcasting receiver or other equipment.  
6.Earphone port  
7.ANT IN: Connect antenna orCATV 75 coaxial cable toreceive TV/CATV signal.  
8. SWITCH and AC INPUT: Power switchand AC power input.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote controller  
Inserting Batteries  
1.Slide open the  
cover of thebattery  
compartment on the  
back of theremote  
controller.  
2.Load twoAA alkaline  
3.Replace the coverof the  
battery compartment.  
batteries in thecompartment.  
paying attention tothe polarity  
diagram in thebattery  
compartment.(plus and minus  
poles to respectivemark)  
Precautions  
Make sure thattwo AAalkaline batteries  
are loaded. The batteries mustbe of the  
same type. The batteries mustbe located  
properly. The batteries are not  
rechargeable.  
As strong lightmay interfere the  
signals, change yourposition to  
operate the remotecontroller if  
the television cannotbe turned  
on or off as youexpect.  
Make sure thatthere is noobstacle between  
the remote controllerand television set.  
Keep the remotecontroller away from  
heat source orhumid area toensure  
effective performance of the remote  
controller.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Keys of remote controller  
- The remote controller cannot be operated unless the batteries are properly loaded.  
- When using the remote control, aim it at the remote control sensor on the TV.  
Function introduction  
STILL  
Picture static  
I/II (NICAM)  
PIP  
SLEEP  
Displaying sleep time,  
adjustable  
Power Off/Standby  
any other programmed  
equipment off.  
MUTE  
SCAN  
STILL  
MUTE  
Switches the sound on or off  
DISPLAY  
SLEEP  
PIP  
SCAN  
Program scan button  
DISPLAY  
Display ON/OFF  
ABC@  
DEF  
Digits  
GHI$  
MNO  
JKL%  
Program direct option(when edit  
program, every press can set  
different sign by turns among the  
digits and sign on top of them)  
TV/AV  
Input source display  
POR&  
STUV  
*#()  
WXYZ  
P.STD  
(Picture mode option)  
TV/AV  
SWAP  
SWAP  
Switch the current channel to the  
last channel you have viewed.  
P.STD  
S.STD  
sound increase  
and decrease  
CH+  
MENU  
CH-  
S.STD  
(Sound mode option)  
VOL-  
VOL+  
Program up and down  
Or turns your TV  
MENU  
main menu entry, menu exit or  
return to nexthigher level menu.  
Teletext buttons  
buttons which have letters  
on top also can use in TV.  
Lock button  
(enter the Lock Set menu)  
H.LOCK  
EXIT  
CH.LIST  
TIMER ZOOM  
EXIT  
clears all on-screen displays and  
returns to TV viewing from any menu.  
Channel list button  
TIMER  
Time display(only when  
there is teletext in TV)  
ZOOM  
Adjust picture aspect ratio  
Note:  
This User's Manual covers the functions of the remotecontroller, including CH+/-,  
VOL-/+, MENU, TV/AV and POWER keysfor control ofprogram up, program down,  
volume decrease, volume increase, menu, TV/AV and power ON/OFF.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote controller  
Effective range  
right  
front 8m  
45  
45  
left  
right  
front 8m  
45  
45  
left  
DISPLAY  
FA  
V
.
POWER  
-
/-  
-
/-  
-
-
Q.VIEW  
SLEEP  
USB  
DISPLAY  
FA  
V
.
POWER  
-
/-  
-
/-  
-
-
Q.VIEW  
SLEEP  
USB  
PSM  
SSM  
TV/AV  
MUTE  
CH+  
PSM  
SSM  
VOL-  
MENU  
CH-  
VOL+  
TV/AV  
MUTE  
CH+  
UP  
LEFT  
VOL-  
MENU  
CH-  
VOL+  
DOWN  
PREV.  
NEXT  
H.LOCK  
UP  
LEFT  
PAUSE  
ENTER  
EXIT  
SWAP  
DOWN  
PREV.  
NEXT  
H.LOCK  
PAUSE  
ENTER  
EXIT  
above  
SWAP  
20  
20  
below  
Ensure the remote controller is pointed toward the remote  
controller window on the display.  
No obstacles should be placed between the remote controller  
and the remote controller window.  
The effective receiving scope for the signal is 8 meters to the  
front of the remote controller window, and 45O to the left or right  
side and 20O above or below the control window.  
Use of remote controller:  
1. To ensure a normal operation, the remote controller should not  
be dropped or damaged in any way .  
It should alsobe kept dryand away fromall heat sources.  
2. Battery replacement is necessary when the remote controller  
acts inconsistently or stops operating the plasma display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Equipment Connections  
Antenna Connection  
Generally speaking, to enjoy a clearer picture, we recommend that you use a  
CATV system or an outdoor antenna .In different places, the suitable antenna  
type and position are different.  
outdoor  
antenna  
Mixer  
additional  
purchase  
Antenna input  
75 standard  
coaxial type  
SWITCH  
AC-INPUT  
AC power  
socket  
ANT IN  
75 coaxial cable  
300 twin-lead cable  
Plug  
(additional purchase)  
Antenna adapter  
Note  
* It isrecommended that you'dbetter use 75 coaxial cable toremove the  
disturbance caused byairwave.  
* Don't bindantenna cable andelectric wire together.  
If the antennaneeds to besplit for twoTv`s, install a  
2-WaySignal Splitter in the connections.  
If the antennais not installedproperly, contactyour  
dealer for assistance.  
Toimprove picture qualityin a poorsignal area,  
purchase and installa signal amplifier.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Equipment Connection  
NOTE: All cables shown are not included with the TV.  
Choose Your Connection  
There are severalways to connectyour television, dependingon the componentsyou  
want to connectand the qualityof the signalyou want toachieve. The following are  
examples of someways to connectyour TV.  
Choose the connectionwhich is bestfor you.  
VCR connection  
- To avoid picturenoise (interference), leavean adequate distancebetween the VCR  
And TV.  
1. Connect the SCART cables from  
the VCR's outputjacks to theTV`s  
input jacks, asshown in thefigure.  
COMPONENT IN  
2. Insert a videotape into theVCR and  
SCART2  
SCART1  
ANT I
Pr/Cr  
Pb/Cb  
Y
L-AUDIO-R  
press PLAY on the VCR. (Referto the VCR  
owner`s manual.)  
3. Select theinput source  
by the TV/AV button  
on the remotecontrol.  
S-VIDEO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Equipment Connections  
DVD connection  
How toconnect  
1. Connect the DVD video outputs (Y,  
Pb/Cb, Pr/Cr) tothe YUV IN jacks onthe TV  
and connect the DVD audio outputs to the  
AUDIO IN jacks on theTV, as shown inthe  
COMPONENT IN  
figure.  
2. If your DVD only has an SCART output  
SCART2  
SCART1  
ANT IN  
Pr/Cr  
Pb/Cb  
Y
L-AUDIO-R  
jack, connect this to the SCART input on  
the TV. as shown in thefigure.  
NOTE: If your DVD player does not have  
component video output,use S-Video.  
How touse  
1. Turn on the DVD player, insert a DVD.  
2. Use theTV/AVand VOL+/- buttonon the  
remote control toselect SCARTmode.  
3. Press Play buttonon external equipment  
for program play.  
or  
4. Refer to the DVD player's manual for  
operating instructions.  
DVD  
DTV connection  
-To watch digitally broadcast programs,  
purchase and connecta digital set-topbox.  
How toconnect  
VGA IN  
COMPONENT IN  
DVI IN  
Use theTV`s YPbPrIN andAUDIO IN jacks,  
VGA or HDMI/DVI VIDEO port for video  
connections, depending on your set-top  
box connections available.Then, make the  
corresponding audio connections.  
How touse  
HDMI/DVI VIDEO  
VGA  
AUDIO  
Pr/Cr  
Pb/Cb  
Y
L-AUDIO-R  
AUDIO  
1. Turnon the digitalset-top box. (Referto  
the owner`s manual for the digital set-top  
box.)  
2. Use TV/AV on the remote control to  
select DVI mode.  
3.Press Play buttonon external equipment  
for program play.  
or  
or  
HDMI/DVI OUTPUT  
R
AUDEO  
L
RGB-DTV OUTPUT  
R
AUDEO  
L
R
AUDEO  
Y
Pb  
Pr  
Digital Set-top Box  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Equipment Connections  
PC connection  
How toconnect  
1. To get the best picture quality, adjust the PC  
graphics card to(>1024 x768),60Hz.  
or DVI source.  
4. Check theimage on yourTV.There may  
be noise associated with the resolution,  
vertical pattern, contrast or brightness in  
PC mode. If noise is present, change the  
PC mode to another resolution, change  
the refresh rate to another rate or adjust  
the brightness and contrast on the menu  
until the pictureis clear.If the refreshrate  
of the PCgraphic card cannot be changed,  
change the PCgraphic card orconsult the  
manufacturer of thePC graphic card.  
NOTES:  
2. Use the TV`s VGA IN  
port for video  
connections, depending onyour PC connector.  
If the graphic card on the PC does not output  
analog and digitalRGB simultaneously, connect  
only one ofeitherVGAIN to display thePC on the  
TV.  
If the graphic card on the PC does output  
analog and digital RGB simultaneously, set the  
TV to either VGA; (the othermode is setto Plug  
and Play automaticallyby theTV.)  
1 Use a VGAcable.  
3. Then, make the corresponding audio  
connection. If usinga sound card,adjust the PC  
sound as required.  
How touse  
1. Turnon the PCand theTV.  
2. Turn on the display by pressing the POWER  
button on theTV's remotecontrol.  
3. UseTV/AVon the remotecontrol to select PC.  
2 Avoid keeping afixed image onthe TV's  
screen for along period oftime. The fixed  
image may become permanently  
imprinted on thescreen.  
3 The synchronization input form for  
Horizontal and Vertical frequencies is  
separate.  
VGA IN  
L
R
VGA  
AUDIO  
AUDIO OUT  
Resolution  
Line  
frequency  
(Khz)  
Frame  
frequency  
(Hz)  
Resolution  
Mode  
VGA  
640*480  
800*600  
1024*768  
31.5KHz  
37.9KHz  
48.4KHz  
60Hz  
60Hz  
60Hz  
SVGA  
XGA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Equipment Connections  
Connecting Headphones  
You can connect a set of headphones to your set if you wish to watch a  
TV programme withoutdisturbing the otherpeople in theroom.  
Plug a set of headphones into the 3.5mm  
mini-jack socket on the rear panel of the set.  
Note  
Prolonged use of headphones at a high volume  
may damage your hearing.  
SWITCH  
AC-INPUT  
ANT IN  
You will not receive sound from the speakers  
when you connect headphones to the system.  
Power source  
TO USE AC POWER SOURCE  
Use theAC polarized linecord provided for  
operation onAC. Insert theAC cordplug into  
a standard polarizedAC outlet.  
AC Outlet  
Wider Hole  
and Blade  
NOTES:  
Never connect theAC line cord plug toother  
than the specifiedvoltage. Use the  
attached power cordonly.  
If the polarizedAC corddoes not fitinto a non-  
polarized ACoutlet, do notattempt to fileor cut  
the blade. Itis the user`sresponsibility to have  
an electrician replacethe obsolete outlet.  
If you causea static dischargewhen touching  
the unit andthe unit failsto function, simply  
unplug the unitfrom theAC outlet andplug it  
back in. The unit shouldreturn to normaloperation.  
Polarized AC Cord Plug  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set up your TV  
-There are severaloptions you mightneed to setup in orderfor your TV to work  
properly. Read the instructions that follow.  
-In the manual, the OSD(on screendisplay) may bedifferent from your TV`s,  
because it is just an example to help you with the TV operation.  
Switching ON/OFF the TV set  
1 Please press down the power switch to  
switch on AC power supply and the power  
indicator will light .  
2 If the indicator is lighting in red, press  
button on the remote controller again.  
3 If you want to exchange to standing by  
status, please press down button on the  
remote controller.  
4 Disconnect the power supply or unplug the  
television if it is intended to completely cease  
the television performance.  
Choose the Menu Language  
When you start using your set for the first time,  
you must select the language which will be  
used for displayingmenus and indications.  
CH+  
1 Press the MENU and CH+/-button to select  
the Function menu.  
2 Press VOL+ to enter.  
3 Press CH+/-button to select Language.  
4 Select a particular language by pressing  
VOL+/- button repeatedly.  
VOL-  
MENU  
CH-  
VOL+  
You can choose oneof 13 languages.  
5 When you are satisfied with your choice,  
press MENU button to return to previous or  
press EXIT button to return to TV viewing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select input modes  
Choose the input source  
If you hope to enjoy the picture from the external  
input source, before to select the source, you need  
to connect thedevices, otherwise, whenyou select  
the source, the none or no signal will appears on the  
screen.  
MUTE  
SCAN  
STILL  
Source  
Press INPUT or TV/AV button on  
television or remote controller,  
the menu appears on the screen.  
Then press CH+/- to select the  
TV item, and press VOL+ to  
ensure it.  
DISPLAY  
SLEEP  
PIP  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
POR&  
STUV  
*#()  
WXYZ  
TV/AV  
SWAP  
P.STD  
S.STD  
CH+  
MENU  
CH-  
TV: the inputsource fromANT IN terminal output.  
SCART1: the input source from SCART1 terminal  
output.  
VOL-  
VOL+  
SCART2: the input source from SCART2 terminal  
output.  
HDTV: the inputsource from YPbPr terminal output.  
PC: the input source from VGA IN terminal  
output.  
H.LOCK  
EXIT  
CH.LIST  
TIMER ZOOM  
HDMI/DVI: the input source from DVI IN terminal  
output.  
Before watching TV program, you need to ensure  
your TV in TV mode.  
Memory function  
When menu parameter is to be modified, the set  
picture and sound status and preset program will  
be remembers as menu exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning menu  
This TV set has three methods to set channels, which are respectively full automatic,  
manual search fine tune.  
In this section, how to use the remote control to set channel is explained. You can  
also use buttons on the TV set to set channel.  
Full automatic search mode  
Automatic search  
1 Press MENU button and then CH+/- button, the icon to  
TUNING menu.  
MUTE  
SCAN  
STILL  
2 Press the VOL+/- buttons to enter submenu, and press  
CH+/- button to select "country" first according to yourself  
that means you have selected the sound system, this is  
useful especially for France ), and then press CH+/-  
button to select "Auto Search" item.  
DISPLAY  
SLEEP  
PIP  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
POR&  
STUV  
*#()  
WXYZ  
TV/AV  
SWAP  
P.STD  
S.STD  
CH+  
MENU  
CH-  
MENU  
VOL-  
VOL+  
PICTURE  
Tuning Program  
AUDIO  
Country  
England  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Auto Search  
Program Table  
PIP Source  
PIP Position  
HDMI/DVI  
Center  
H.LOCK  
EXIT  
CH.LIST  
TIMER ZOOM  
Note : the TUNING menu will be only operated in normal  
TV mode.  
3Press the VOL+/- button to ensure automatic search  
with higher level.  
Note:  
If you have set Tuner Lock  
in Lock Set menu. Password  
must be entered when  
VHF-L 188.16 MHz  
operating menu tuning.  
Otherwise there will be Tuner  
Lock display on screen.  
After the search has finished, all channels now playing  
program will be automatically preset in order.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning menu  
Program Table  
1
Press MENU button and then CH+/- button, the icon to  
TUNING menu.  
2
Press VOL+/- button to  
MENU  
enter submenu, and press  
CH+/- button to select  
"Program Table", press  
VOL+ button to enter.  
Or press CH.LIST button  
on remote controller.  
MUTE  
SCAN  
STILL  
PICTURE  
Tuning Program  
Country  
AUDIO  
England  
DISPLAY  
SLEEP  
PIP  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Auto Search  
Program Table  
PIP Source  
HDMI/DVI  
Center  
ABC@  
DEF  
PIP Position  
GHI$  
JKL%  
MNO  
3
Press CH+/- button to  
POR&  
STUV  
*#()  
WXYZ  
select the edited channel,  
and press button  
TV/AV  
SWAP  
Program Table  
corresponding to edit.  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
P.STD  
S.STD  
(Red button: delete channel;  
Green button: copy channel;  
Yellow button: Name channel;  
Blue button: Swap)  
CH+  
MENU  
CH-  
VOL-  
VOL+  
Red: Del; Green: copy; Yellow:Name; Blue: Swap  
delete name  
H.LOCK  
EXIT  
Press CH+/- toselect the channel, and press thered button  
on the remotecontroller to delete, then press MENU button  
to delect name.  
CH.LIST  
TIMER ZOOM  
Copy channel  
Press CH+/- toselect the channel, and press thegreen button  
on the remotecontroller, thenpress CH+/- buttonto select  
the channel tocopy, press again thegreen button thenpress  
MENU button to ensure.  
Name channel  
Press CH+/- toselect the channel, and press theyellow button  
on the remotecontroller, andpress the yellowbutton to display  
the digital andletter list, pressVol+/- orCH+/- to selectthe  
desired digital orletter, pressthe yellow buttonto exit list,  
then press MENU button to ensure.  
Swap channel  
Press CH+/- toselect the channel, and press theblue button  
on the remotecontroller, thenpress CH+/- buttonto select  
the channel toswap, then pressagain the blue button to  
ensure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning menu  
Manual search  
If excessive channel signals of unwanted programs  
are received in local area, manual search function is  
recommended.  
1 Press CH+/- buttons or the NUMBER 0-9 button to  
choose desired searching frequency.  
(regard channel 18 as example).  
MUTE  
SCAN  
STILL  
DISPLAY  
SLEEP  
PIP  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
2 After calling up the  
MENU  
TUNING menu, press  
POR&  
STUV  
*#()  
WXYZ  
PICTURE  
CH+/- button  
TV/AV  
SWAP  
Tuning Program  
AUDIO  
Country  
England  
to select "Tuning  
Program" item.  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Auto Search  
Program Table  
PIP Source  
PIP Position  
P.STD  
S.STD  
HDMI/DVI  
Center  
CH+  
MENU  
CH-  
VOL-  
VOL+  
MENU  
3 Press CH+/- toselect  
Manual Search item,  
Press VOL+ buttonto  
enter the desired  
frequency and press  
the digital button to  
adjust.  
H.LOCK  
EXIT  
PICTURE  
AUDIO  
Tuning Program  
18  
C 28  
Program Number  
CH.LIST  
TIMER ZOOM  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Edit Name  
AUTO  
D/K  
Color System  
Sound System  
Manual Search  
Fine Tuning  
Skip  
62.25MHz  
Off  
4 press MENU button to return to previous or  
press EXIT button to return to TV viewing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning menu  
Fine Tuning  
If the picture and/or sound are poor, try using the FINE  
TUNING feature. Do not use this feature unless reception  
is poor.  
1 Press CH+/- button or  
NUMBER 0-9 button to  
18  
c 28  
AUTO  
BG  
MUTE  
SCAN  
STILL  
DISPLAY  
SLEEP  
PIP  
choose desired channels  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
POR&  
STUV  
*#()  
WXYZ  
2 Press MENU button  
and CH+/- button, till the  
TUNING menu shown on  
TV/AV  
SWAP  
P.STD  
S.STD  
MENU  
CH+  
MENU  
CH-  
the right display on the  
PICTURE  
screen.  
Tuning Program  
AUDIO  
VOL-  
VOL+  
Country  
England  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Auto Search  
Program Table  
PIP Source  
PIP Position  
HDMI/DVI  
Center  
3 Press VOL+ button  
to enter submenu, and  
press CH+/-button  
to select Tuning Program  
item, and then press  
VOL+ to next submenu,  
and press CH+/-button  
again to make the  
H.LOCK  
EXIT  
CH.LIST  
TIMER ZOOM  
MENU  
PICTURE  
AUDIO  
Tuning Program  
18  
C 28  
Program Number  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Edit Name  
Color System  
Sound System  
icon to Fine Tuning.  
AUTO  
D/K  
62.25MHz  
Manual Search  
Fine Tuning  
Skip  
Off  
4 Press VOL-/+ button  
all through to carry out fine  
tune, till the best picture and sound are obtained, then  
loosen the button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning menu  
You can watch TV program in a presetting channel.  
How to select the desired program  
1 Using "Program number" buttons  
Press digit button to select the program.  
If 2-digit or 3-digit programs are selected , press  
digit buttons you needed continuously within 3  
seconds.  
MUTE  
SCAN  
STILL  
If selected channel program is set at Lock on mode  
and no password has been entered after initiation of  
the television, the screen will indicate require password  
entry. If wrong password is entered, channel selection  
will fail and previous program will still stay on the screen.  
The program locking password can be modified in the  
preset menu and previous password will be required.  
DISPLAY  
SLEEP  
PIP  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
POR&  
STUV  
*#()  
WXYZ  
TV/AV  
SWAP  
P.STD  
S.STD  
CH+  
MENU  
CH-  
VOL-  
VOL+  
2 Using the CH+/- button.  
Press the CH+button to selecta channel numberin  
number increasing direction.  
Press the CH-button to selecta channel numberin  
number decreasing direction.  
H.LOCK  
EXIT  
(Note: If Skip is ON on one channel, press CH+/- button,  
the channel will not appear.)  
CH.LIST  
TIMER ZOOM  
How to select the desired sound  
Press the VOL-/+ button on the remote controller or  
the front of the TV set to adjust the volume level.  
The range is0~100. When thevolume buttons are  
pressed the volume level is displayed automatically  
on the TV screen.  
Volume  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning menu  
If the colour of some channel is abnormal  
Usually this shouldbe set inthe auto position.However  
if the colourdisplayed on thescreen are incorrect,you can  
manually select thecorrect colour system.  
MUTE  
SCAN  
STILL  
Press the MENU CH+/-and  
VOL+/- button, till the Tuning  
DISPLAY  
SLEEP  
PIP  
MENU  
Program menu shown on the  
right will display on the screen.  
PICTURE  
ABC@  
DEF  
Tuning Program  
AUDIO  
18  
C 28  
Program Number  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Edit Name  
GHI$  
JKL%  
MNO  
AUTO  
D/K  
Color System  
Sound System  
Manual Search  
POR&  
STUV  
*#()  
WXYZ  
Fine Tuning  
Skip  
Off  
TV/AV  
SWAP  
P.STD  
S.STD  
If picture color is abnormal  
CH+  
MENU  
CH-  
Press the CH+/- button to select"Color System", then press  
the VOL-/+ button to select the correct color system. In  
general, you can set it as"AUTO".  
Press VOL+/- button to select AUTO, NTSC, PAL, SECAM,  
PAL60 and NTSC4.43 in turn.  
VOL-  
VOL+  
If sound is abnormal  
H.LOCK  
EXIT  
Press the CH+/-button to select "Sound System", thenpress  
the VOL-/+ buttonto select thecorrect sound system.  
Press VOL+/- buttonto select D/K, I, B/G, M in turn.  
CH.LIST  
TIMER ZOOM  
Edit Name  
If current program is to be named, press VOL-/+ button to  
select position you want to change and press digits to change,  
press MENU button to ensure it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning menu  
Skip  
After the programs are presetting, you can skip some  
programs so that to select your favorite channels only.  
1. Press CH+/- button or  
Direct-digit Choosing  
button to selecta  
MUTE  
SCAN  
STILL  
MENU  
DISPLAY  
SLEEP  
PIP  
channel directly (take  
PICTURE  
channel 18 forexample).  
Tuning Program  
ABC@  
DEF  
AUDIO  
18  
Program Number  
C 28  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Edit Name  
Color System  
Sound System  
GHI$  
JKL%  
MNO  
AUTO  
D/K  
2.Press MENU CH+/-  
and VOL+/- button,  
till the Tuning Program  
menu shown on the  
right will display on the  
screen.  
Manual Search  
Fine Tuning  
Skip  
POR&  
STUV  
*#()  
WXYZ  
Off  
TV/AV  
SWAP  
P.STD  
S.STD  
CH+  
MENU  
CH-  
VOL-  
VOL+  
3. press VOL-/+ button to set Skip On.  
And press menu exit.  
If you want to recover the skipped channel  
H.LOCK  
EXIT  
1. Use Direct-digit Choosing button to select the number  
of the channel to be recovered.  
2. Do the above steps again.  
CH.LIST  
TIMER ZOOM  
3. Press VOL+/- button to set Skip Off.  
Program swap  
Swap function enables quick swap to the last watched program.  
1
Suppose the channel number you  
used just now is 8 and the channel  
number you areusing is 18(as shown in  
the figure).  
2
If you want to return to the last  
watched program channel 8, you can  
simply press the swap button.  
3
If you want to return to channel 18,  
press the button again. Through this  
function, you can easily change  
between the channelyou are usingand  
the channel youused last time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture menu  
How to select picture modes  
You can quickly select the desired picture mode from  
three preset modes and one customized mode.  
Press the P.STD button to call up  
MUTE  
SCAN  
STILL  
Video Mode  
Video mode menu, and press  
Bright  
CH+/-button to select the  
DISPLAY  
SLEEP  
PIP  
ABC@  
DEF  
Normal  
desired picture quality. Four kinds  
GHI$  
JKL%  
MNO  
of picture modes(i.e., "Normal",  
"Soft","Personal" ,"Bright", ) can  
be selected in turn.  
Soft  
POR&  
STUV  
*#()  
WXYZ  
Personal  
TV/AV  
SWAP  
P.STD  
S.STD  
A sparesetting that canbe adjusted topersonal status  
Personal  
Normal  
Soft  
CH+  
MENU  
CH-  
Designed for roomsthat have goodall round lighting  
Designed for nighttime low lightviewing  
VOL-  
VOL+  
Bright  
Designed for roomswith high ambientlighting such  
as daytime sport;  
How to customize your own picture status  
1
Press MEUN button and  
H.LOCK  
EXIT  
then CH+/- button , till the  
PICTURE menu shown on  
the right display on the  
screen. Press VOL+/- to  
enter.  
CH.LIST  
TIMER ZOOM  
MENU  
PICTURE  
Video Mode  
Contrast  
Personal  
AUDIO  
50  
50  
0
ADJUST  
TUNING  
FUNCTION  
TIMER  
Brightness  
Saturation  
Hue  
0
0
Sharpness  
Noise Reduction  
Auto  
2
Press the CH+/- button  
to select the item to  
adjusted, then press the  
VOL-/+ buttons to obtain  
the desired effect.  
Note: 1. thehue item isavailable only in  
NTSC system.  
2.the video mode, the saturation,  
the hue and the sharpness items are no  
available in VGAand DVI mode.  
Press VOL-  
Press VOL+  
Bright  
Brightness  
Dark  
Contrast  
Weak  
Strong  
Sharpness  
Soft  
Sharp  
Shallow color  
More purple  
Saturation  
Deep color  
More green  
Hue(only in NTSCmode)  
NOTE these items areadjustable only whenthe "video mode" is  
set as "personal".  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture menu  
Noise Reduction  
Automatically filters out and reduces the image noise  
and improves picture quality when receiving weak  
video signals.  
MUTE  
SCAN  
STILL  
1 After calling up the  
Picture menu, press  
CH+/- button to select  
DISPLAY  
SLEEP  
PIP  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
"Noise Reduction" item.  
MENU  
POR&  
STUV  
*#()  
WXYZ  
PICTURE  
Video Mode  
Contrast  
Personal  
AUDIO  
TV/AV  
SWAP  
50  
50  
0
2 Press VOL+ to enter  
the list. Select Off, Auto  
Weak, Medium or  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Brightness  
Saturation  
Hue  
P.STD  
S.STD  
0
0
Sharpness  
Noise Reduction  
CH+  
MENU  
CH-  
Auto  
Strong according  
VOL-  
VOL+  
to the image noise.  
3 Press MENU return  
to the picture menu.  
H.LOCK  
EXIT  
CH.LIST  
TIMER ZOOM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound menu  
To choose sound modes  
You can quickly select the desired sound mode from  
three preset modes and one customized mode.  
Press the S.STD button to call up  
Audio mode menu, and press  
CH+/- button to select the  
Audio Mode  
Music  
MUTE  
SCAN  
STILL  
DISPLAY  
SLEEP  
PIP  
desired sound quality. Four kinds  
Standard  
Hall  
ABC@  
DEF  
of sound models (i.e., Music  
Personal Standard and  
Hall ) can be selected in turn.  
,
GHI$  
JKL%  
MNO  
,
Personal  
POR&  
STUV  
*#()  
WXYZ  
TV/AV  
SWAP  
P.STD  
S.STD  
Sound quality  
Sound mode  
Personal  
A sparesetting that canbe adjusted topersonal tastes  
CH+  
MENU  
CH-  
Normal sound withmoderate bass andtreble setting  
Standard  
Hall  
VOL-  
VOL+  
Designed to reducethe bass andtreble which  
enhances the voicefor news programs  
Enables extra bassand treble toenhance the movie  
experience  
Music  
H.LOCK  
EXIT  
CH.LIST  
TIMER ZOOM  
Balance  
To balance right and left sound of the television.  
The intermediate value is 0. When indication value of Balance  
increases toward+50, sound of the right and left speaker  
becomes stronger and weaker, respectively. When indication  
value of Balance decreases toward -50, sound of the right and  
left speaker becomes weaker and stronger.  
1
Press MENU button and  
then CH+/- button to select  
AUDIO menu.  
MENU  
2
Press VOL+ to enter the  
PICTURE  
0
0
Volume  
AUDIO  
submenu. Press CH+/- button  
to select Balance item. Press  
VOL+/- to adjust the desired  
level.  
Balance  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Audio Mode  
Five Equalizer  
Surround  
Auto Volume  
Woofer  
Music  
0
Off  
0
3 Press MENU return  
to the picture menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound menu  
Setting Five Equalizer sound  
The sound settings can be adjusted to suit your  
personal preferences.  
1 Press MENU button and  
then CH+/- button to select  
AUDIO menu.  
MUTE  
SCAN  
STILL  
DISPLAY  
SLEEP  
PIP  
MENU  
ABC@  
DEF  
PICTURE  
2 Press CH+/- button to  
select "Five Equalizer", then  
press VOL+ buttons to enter  
the submenu.  
0
0
Volume  
AUDIO  
Balance  
GHI$  
JKL%  
MNO  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Audio Mode  
Five Equalizer  
Surround  
Auto Volume  
Woofer  
Music  
POR&  
STUV  
*#()  
WXYZ  
0
Off  
0
TV/AV  
SWAP  
P.STD  
S.STD  
3 Press CH+/- button to  
select frequency to adjust,  
then press VOL+/- buttons to  
adjust the value data.  
CH+  
MENU  
CH-  
VOL-  
VOL+  
MENU  
PICTURE  
AUDIO  
Five Equalizer  
4 When you are satisfied with  
the setting, press MENU button  
to return to the previous menu.  
0
120Hz  
ADJUST  
TUNING  
FUNCTION  
TIMER  
0
500Hz  
0
0
1500Hz  
5000Hz  
10000Hz  
H.LOCK  
EXIT  
0
CH.LIST  
TIMER ZOOM  
Setting the surround sound  
The surround soundfeature expands theaudio listening  
field wider anddeeper to createexceptional sound  
quality from theTV`s speakers.  
Select Surround from -50 to+50 . Whenintermediate value  
toward +50, theeffect will be distinctness.  
Repeated step 1-2, and press CH+/-to select surround, and  
then press VOL+/- toset the desiredvalue.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound menu  
Setting the Auto Volume  
Each broadcasting stationhas its ownsignal conditions,  
and so itis not easyfor you toadjust the volumeevery time  
the channel ischanged. This featurelets you automatically  
adjust the volumeof the desiredchannel and reducesthe  
volume differences betweenchannels and programs,  
providing a moreconstant overall level. This will alsoreduce  
the dynamics ofsound.  
MUTE  
SCAN  
STILL  
DISPLAY  
SLEEP  
PIP  
Repeated step 1-2, and press CH+/-to select Auto Volume,  
and then press VOL+/- toset as Off or On.  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
POR&  
STUV  
*#()  
WXYZ  
Setting the woofer sound  
TV/AV  
SWAP  
Woofer is aspeaker that complements frontspeaker`s  
reproduction capability of low-pitchedsound.  
Select Woofer toset the valueof woofer from0 to 100.  
P.STD  
S.STD  
CH+  
MENU  
CH-  
Repeated step 1-2, and press CH+/-to select Woofer,  
and then press VOL+/- toadjust the desiredlevel.  
VOL-  
VOL+  
How to eliminate sound  
H.LOCK  
EXIT  
CH.LIST  
TIMER ZOOM  
When you need to pay attention to surrounded sounds, or  
there is a telephone calling you or there are some guests  
visiting you, the sound elimination (mute) function is very  
convenient.  
1
Press the MUTEbutton on  
the remote controland "Mute"  
type face willdisplay on the  
lower part ofthe screen. At this  
time, the soundof the TV set  
is turned off.  
Mute  
2
If you wantto recover the  
sound, press theMUTE  
button again ordirectly press  
the VOL-/+ buttons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer menu  
Timer setting  
The clock will only work if the TV set is turned  
on or in standby. When the set is disconnect  
from the power supply or is turned off by the  
main power on the rear panel, the clock loses  
power and will need to be reset when the power  
MUTE  
SCAN  
STILL  
DISPLAY  
SLEEP  
PIP  
1 Press the MENU button and CH+/- button, till the TIMER  
menu display on the screen.  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
POR&  
STUV  
*#()  
WXYZ  
TV/AV  
SWAP  
MENU  
P.STD  
S.STD  
PICTURE  
CH+  
MENU  
CH-  
Timer  
AUDIO  
Time Off  
ADJUST  
TUNING  
FUNCTION  
TIMER  
VOL-  
VOL+  
Time On  
TimerOn Prog  
Timer Prog  
Prog Num  
H.LOCK  
EXIT  
2 Press CH+/- button select "Timer", press VOL -/+  
buttons to select hour or minute position; then press  
digits buttonsto setthe valueof houror minute;  
CH.LIST  
TIMER ZOOM  
3Press MENU button toreturn theprevious menu.  
NOTE:  
Indication will appear on the screen 1 minute prior to  
expiry of set time.  
Suppose Time Off is set, and indication is as follows:  
1.If Timeroption is setting,  
the time you set for Time  
Off/Time Onwill be a point of  
time. Otherwise, if Timer is  
not set, the time you set for  
Time Off/Time On will be a  
period of time.  
Time Off  
2.Sleep Off/ Time Offcan  
not be set at simultaneously.  
If both of the two are set, the  
later setup will be operation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer menu  
You can set the On/Off timers so that the set will :  
Switch on automaticallyand tune tothe channel ofyour choice atthe time  
you select.  
Switch off automatically at thetime you select.  
On/off timer \Timer on Prog\ Timer Prog  
1 Press MENU andVOL+/- button tocall up theTIMER menu  
on the screen.  
MUTE  
SCAN  
STILL  
DISPLAY  
SLEEP  
PIP  
MENU  
PICTURE  
ABC@  
DEF  
Timer  
AUDIO  
Time Off  
GHI$  
JKL%  
MNO  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Time On  
TimerOn Prog  
Timer Prog  
Prog Num  
POR&  
STUV  
*#()  
WXYZ  
TV/AV  
SWAP  
P.STD  
S.STD  
CH+  
MENU  
C-  
2
Press CH+/- buttonto select "Time On", press VOL-/+  
buttons to selecthour or minuteposition; then pressdigits  
buttons to setthe value ofhours or minutes.  
(take 19:00 asan example)  
VOL-  
VOL+  
H.LOCK  
EXIT  
MENU  
CH.LIST  
TIMER ZOOM  
PICTURE  
Timer  
AUDIO  
Time Off  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Time On  
TimerOn Prog  
Timer Prog  
Prog Num  
3 Press CH+/- buttonto select "Timer On Prog", then  
press VOL-/+ andprogram direct numberbuttons to select  
your desired channel(take 8 asan example).  
4press CH+/- buttonto select "Timer Prog", press VOL-/+  
buttons to selecthour or minuteposition; then pressdigits  
buttons to setthe value ofhours or minutes.  
5
Repeat step 1-2to set Time Off .(Take22:30 as an  
example)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function menu  
It is possible to select language, OSD transparent, position and screen display  
of the menuas follows:  
Function setup  
1. Press MENU buttononce, and theCH+/- button untilthe  
following menu appearson the screen:  
MUTE  
SCAN  
STILL  
MENU  
DISPLAY  
SLEEP  
PIP  
PICTURE  
English  
Language  
AUDIO  
Menu Timeout  
Menu Backgroud  
BlueScreen  
15 seconds  
Transparent  
Off  
ABC@  
DEF  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Calendar  
GHI$  
JKL%  
MNO  
West Europe  
TeleText Language  
Restore Default Value  
POR&  
STUV  
*#()  
WXYZ  
TV/AV  
SWAP  
P.STD  
S.STD  
2. Press VOL+ buttonon the remotecontroller to callup the  
FUNCTION menu.  
CH+  
MENU  
CH-  
3. Press CH+/- toselect desired itemon the menu.  
4.Press VOL+/- to adjust the itemyou have selected.  
VOL-  
VOL+  
OSD language option  
Repeat step 3and 4 toselect the languageyou wanted from  
the 13 kindsof languages.  
H.LOCK  
EXIT  
CH.LIST  
TIMER ZOOM  
Menu Timeout  
Repeat step 3and 4 toselect the timeof the OSDdisplay in  
sequence as follows:5 seconds,15 seconds, 10seconds,  
20seconds, 25seconds, 30seconds and 40seconds.  
Menu Background  
Repeat step 3and 4 toselect Transparent/ Opaque  
background of OSD.  
Blue Screen  
Repeat step 3 and 4 to select Blue Screen On/Off.If you  
select ON, when no signal, the background is blue; if you  
select OFF, when no signal, the background is dark.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function menu  
Function setup (continue)  
Calendar display and check  
Repeat step 3 and 4 to enter Calendar menu as follows:  
2005-01-01  
MUTE  
SCAN  
STILL  
Sun. Mon. Tue. Wed. Thu. Fri.  
Sat.  
1
DISPLAY  
SLEEP  
PIP  
2
9
16  
23  
30  
3
10  
17  
24  
31  
4
5
6
13  
20  
27  
7
8
11 12  
18 19  
25 26  
14 15  
21 22  
28 29  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
POR&  
STUV  
*#()  
WXYZ  
Press VOL+/- toselect among year, month and day,  
and then CH+/- to adjust them.  
TV/AV  
SWAP  
P.STD  
S.STD  
Teletext Language  
Repeat step 3 and 4 to select from 6 kinds of languages.  
(West Europe/East Europe/Cyrillic/Greek/Arabic/Persian.)  
CH+  
MENU  
CH-  
VOL-  
VOL+  
Restore Default Value  
Repeat step 3and 4 toreturn the factorymode.  
H.LOCK  
EXIT  
CH.LIST  
TIMER ZOOM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjust menu  
To choose picture aspect ratio  
1 Using ZOOM button.  
Press ZOOM button to select the  
Normal  
desired picture ratio. Three kinds  
MUTE  
SCAN  
STILL  
of aspect ratio models (i.e.,  
Wide screen  
4:3 mode  
DISPLAY  
SLEEP  
PIP  
"Normal", "Wide screen" and "4:3  
mode") can be selected in turn.  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
POR&  
STUV  
*#()  
WXYZ  
Aspect ratio  
Normal  
Picture effect  
TV/AV  
SWAP  
no cut outon input signal picture with un-changed  
scale displayed onthe screen(to keepthe scale,  
maybe only thecenter area ofthe screen isactive)  
P.STD  
S.STD  
CH+  
MENU  
CH-  
input signal isvertically cut outby 10% andpicture's  
center area isnon-linear zoomed tofill the whole  
screen  
Widescreen  
4:3 mode  
VOL-  
VOL+  
Choose 4:3 when you wantto view apicture with an  
original 4:3 aspectratio, with blackbars appearing at  
both the leftand right sides.  
H.LOCK  
EXIT  
CH.LIST  
TIMER ZOOM  
2 Using the MENU button.  
1 Press MENU buttonand then CH+/-button , tillthe ADJUST  
menu shown onthe right displayon the screen.  
MENU  
PICTURE  
Display Mode  
Adjust  
Normal  
AUDIO  
It does not  
work on  
the TV  
ADJUST  
TUNING  
FUNCTION  
TIMER  
RGB  
Note: Under the HDTV  
VGA and DVI signal,  
there are only Normal  
and 4:3 mode to adjust.  
Default  
Auto Sync  
Color Temperature  
Black Stretch  
Normal  
Off  
mode.  
2 Press CH+/- buttonto select Display Mode option,  
then press VOL+button to selectthe desired option.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjust menu  
In PC and HDMI/DVI input mode, H-Position and V-Position can be adjusted to eliminate  
transverse line interference and decentered picture as follows:  
H-Position and V-Position adjust  
Adjust is opted for adjusting H-Position and V-Position  
as well asrelative parameters inVGA andDVI modes.  
1. Press MENU button and CH+/- to call up the ADJUST  
menu. as follows:  
MUTE  
SCAN  
STILL  
DISPLAY  
SLEEP  
PIP  
PC, HDMI/DVI:  
ABC@  
DEF  
MENU  
GHI$  
JKL%  
MNO  
PICTURE  
Display Mode  
Adjust  
Normal  
POR&  
STUV  
*#()  
WXYZ  
AUDIO  
Only be adjustable  
in the PC,HDMI/DVI  
mode.  
ADJUST  
TUNING  
FUNCTION  
TIMER  
RGB  
TV/AV  
SWAP  
Default  
Auto Sync  
Color Temperature  
Black Stretch  
P.STD  
S.STD  
Normal  
Off  
CH+  
MENU  
CH-  
VOL-  
VOL+  
2. Press VOL+ button on television or remote controller  
to enter theadjust menu ofpicture position setup.  
H.LOCK  
EXIT  
MENU  
CH.LIST  
TIMER ZOOM  
PICTURE  
Adjust  
AUDIO  
H Size  
ADJUST  
H Position  
TUNING  
V Size  
V Position  
FUNCTION  
Fine Tune  
TIMER  
Smoothing  
3. Press CH+/- buttonfor desired adjustparameter option.  
4. Press VOL+/- fordesired adjust parameteroption until  
satisfactory value isachieved. When VGAsignals are received,  
the automatic modeis used forparameter adjustment.  
H Size Horizontal size of picture can be adjusted in this item.  
H Position: Horizontal position of picture can be adjusted in this item.  
V Size: Vertical size of picture can be adjusted in this item.  
V Position: Vertical position of picture can be adjusted in this item.  
Fine Tune: Adjust phase to the best effect suiting for VGA signal.  
Smoothing: make the line of the picture smooth.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjust menu  
RGB/Default/Auto Sync  
1) RGB is opted for adjustment of the numerical value of red,  
green and bluein PC,HDMI/DVI mode.  
2) Default is opted for adjustment of parameters to delivery  
setup in PC mode.(After the operation, complete will be on the  
right of theoperation)  
MUTE  
SCAN  
STILL  
3) Auto Sync is opted for adjustment of picture location  
frequency and phase parameters in PC mode.(After the  
operation, complete willbe on theright of theoperation)  
DISPLAY  
SLEEP  
PIP  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
POR&  
STUV  
*#()  
WXYZ  
Color Temperature  
TV/AV  
SWAP  
Press CH+/- to make the icon to Color Temperature,  
and press VOL+/- button to select.  
P.STD  
S.STD  
CH+  
MENU  
There are four kinds of  
modes (i.e., "Normal",  
"Cold" ,"Green","Warm" )  
can be selected in turn.  
VOL-  
VOL+  
MENU  
PICTURE  
Display Mode  
Adjust  
Normal  
AUDIO  
ADJUST  
TUNING  
FUNCTION  
TIMER  
RGB  
Default  
H.LOCK  
EXIT  
Auto Sync  
Color Temperature  
Black Stretch  
Normal  
Off  
CH.LIST  
TIMER ZOOM  
This will increaseor decrease Warm (red) and Cold  
(blue) colors to suit personal preferences. Select Cold  
to give the white colors a blue tint, Normal to give the  
white colors a neutral tint, Warm to give the white colors  
a red tint. Green to give the white colors a green tint.  
Black Stretch  
Black Stretch-(Automatically Increases the Contrast  
Rage)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lock setup  
How to use the password function  
Press H.LOCK button, Password will appearon the screen.  
The television has the  
function of security  
default lock. Password  
needs to be entered  
when the program  
lock mode is to be  
set.  
The initial password of thetelevision is 0000and security  
default password is9443. then enterLock Set menu.(as  
follow)  
LOCK SET  
Password  
Off  
Off  
1
Tuner Lock  
Prog Set  
MUTE  
SCAN  
STILL  
Prog Num  
Source Lock  
Child Lock  
Max Volume  
Clear Lock  
DISPLAY  
SLEEP  
PIP  
Off  
100  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
The television hasthe function ofsecurity default lock.  
Password needs tobe entered whenthe program lockmode  
is to beset.  
POR&  
STUV  
*#()  
WXYZ  
TV/AV  
SWAP  
P.STD  
S.STD  
Note: If thepassword is notcorrectly entered, youwill be  
required to reenterthe password andthe cursor willstay at  
the first place.  
The security default password is9443.  
Press EXIT to cancel thewindow.  
CH+  
MENU  
CH-  
VOL-  
VOL+  
To set new Password  
H.LOCK  
EXIT  
The password canbe changed.  
After entering the Lock set menu, Press CH+/- to select  
password, Press vol+/-, the screen willdisplay the follow.  
CH.LIST  
TIMER ZOOM  
Old ----  
If correct password is entered, the screen will display the  
follow.  
New ----  
Press digital button to set the new desired password, and  
the screen willdisplay the follow.  
Note:  
If Clear Lockis activated,  
the password setup  
cannot be changed.  
Repeat ----  
If the desired password is entered correctly twice, the old  
password will be changed. If the desired password is not  
correctly entered twice, the screen will display New ----, then  
you have toreenter the password.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lock setup  
Tuner Lock  
Press CH+/- to select Tuner Lock and VOL+/- to set On/  
Off. (To set On, some operation such as search will be  
not available. Whenenter theTUNING menu,Tuner Lockwill be  
on the screen,and the timewill be thesame with themain menu if  
no operation. Ifyou want tooperate TUNINGmenu, you needto  
enter the Lockmenu to setTuner LockOff oroperate Clear Lock.  
MUTE  
SCAN  
STILL  
DISPLAY  
SLEEP  
PIP  
Prog Set  
ABC@  
DEF  
Prog Set is opted for setting up start channel. Press CH+/- button  
to select Prog Set. Press VOL+/- button, sources can be  
swapped in TV/SCART1/SCART2/HDTV/PC/HDMI/DVI mode.  
After setup, the set mode will be entered if the television is  
switched off and on again. To set Off, the television will memory  
the off-channel.  
GHI$  
JKL%  
MNO  
POR&  
STUV  
*#()  
WXYZ  
TV/AV  
SWAP  
P.STD  
S.STD  
CH+  
MENU  
CH-  
Prog Num  
VOL-  
VOL+  
Prog Num is opted for setting up preset channel. Press CH+/-  
button to select Prog Num. Press VOL /- button, to select  
channel number.(The item is not available except TV signal.)  
Source Lock  
H.LOCK  
EXIT  
Source Lock isopted to hinderexternal input modes, such as  
AV, Scart andVGA. Press CH+/- button to selectthe option,  
and press VOL+/- button to displaySource Lock menuas  
follows:  
CH.LIST  
TIMER ZOOM  
Source Lock  
Off  
Off  
SCART1  
SCART2  
HDTV  
Off  
Off  
PC  
Off  
HDMI/DVI  
Press CH+/- button to select desired option. Press VOL+/-  
button to set up the mode of Source Lock. If some Source Lock  
is set ON, the mode will be entered and the screen will display  
blue background with the mute mode activated and Lock. In  
lock on mode, when screen is blank, icon Lock will be always  
displayed on the screen. If lock mode is to be verified, enter  
Source Lock submenu and set relative mode off, or select Clear  
Lock in the Lock Set Menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lock setup  
Child Lock  
Press CH+/- button to select Child Lock.  
Press VOL+/- button to set On or Off mode. If lock on  
mode is set, Child Lock is in activated automatically.  
In such case, if Child Lock button (button on the  
television) is pressed, the screen will display Child  
Lock, which can be erased by press of EXIT button. 5  
seconds later after the latest press, the screen  
display will disappear automatically. The Child Lock  
mode can be resumed by entering Lock Set menu, set  
Child Lock On or Off.  
MUTE  
SCAN  
STILL  
DISPLAY  
SLEEP  
PIP  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
POR&  
STUV  
*#()  
WXYZ  
TV/AV  
SWAP  
Max Volume  
P.STD  
S.STD  
Press CH+/- button to select Max Volume. Press  
VOL+/- button for adjustment between 0 100. If a  
certain value is set, when volume is being adjusted,  
the sound value can not exceed maximum volume  
value. If current volume is over Max Volume, when  
Lock Set menu is set, current volume will become set  
maximum volume. If current volume is below  
maximum volume, customer set volume will stay  
unchanged.  
CH+  
MENU  
CH-  
VOL-  
VOL+  
H.LOCK  
EXIT  
CH.LIST  
TIMER ZOOM  
Clear Lock  
Press CH+/- button to select Unlock mode. Press  
VOL+/- button to unlock all set modes, setting all lock  
options to off, and the maximum volume returns to 100.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture in Picture  
Preparation  
Press the PIPbutton on the remote control to swicth to PIP  
function.  
PIP position  
1 Press MENU button and then  
press CH+/- button, till the  
TUNING menu shown on the  
MUTE  
SCAN  
STILL  
DISPLAY  
SLEEP  
PIP  
ABC@  
right display on the screen.  
DEF  
MENU  
PICTURE  
GHI$  
JKL%  
MNO  
Tuning Program  
AUDIO  
Country  
England  
2 Press the CH+/- button to select  
PIP Position item.  
ADJUST  
TUNING  
FUNCTION  
TIMER  
Auto Search  
Program Table  
PIP Source  
PIP Position  
POR&  
STUV  
*#()  
WXYZ  
HDMI/DVI  
Center  
TV/AV  
SWAP  
3 Press the VOL+ button repeatedly  
until desired position is achieved.  
The sub picture moves  
P.STD  
S.STD  
CH+  
MENU  
CH-  
Left Top/Right Top / Right Bottom/  
Left Bottom /Center.  
VOL-  
VOL+  
Selecting an Input Signal Source for PIP  
H.LOCK  
EXIT  
1 Press MENU button and then  
press CH+/- button, till the  
CH.LIST  
TIMER ZOOM  
MENU  
TUNING menu shown on the  
PICTURE  
right display on the screen.  
Tuning Program  
AUDIO  
Country  
England  
ADJUST  
Auto Search  
TUNING  
FUNCTION  
TIMER  
Program Table  
PIP Source  
2 Press the CH+/- button to select  
PIP Source item.  
HDMI/DVI  
Center  
PIP Position  
3 Press the VOL+ button repeatedly  
until desired source is achieved.  
NOTE:  
If to use PIP function, you  
need to select one of two in  
main picture source and  
available sub picture source;  
When the VGA is be sub picture,  
the resolution must be more  
800x600 dot;  
Each press ofVOL+/- button changes themain source.  
Main Picture Sources  
Available SubPicture Sources  
When the HDMI/DVI is be sub  
picture, the DVI to HDMI is  
no useful.  
TV, SCART1, SCART2,  
HDTV,PC  
HDMI/DVI  
HDMI/DVI/SCART(RGB)  
TV,HDTV,PC  
SCART(RGB)  
HDMI/DVI  
TV,HDTV,PC  
TV, SCART1, SCART2, HDTV,PC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others functions  
NICAM  
If the broadcasteris transmitting  
Bilingual sound service. The  
/
button on theremote controller will  
allow up to2 separate languages  
to be selected.  
You can press the  
/
MUTE  
SCAN  
STILL  
button to makea choice.  
DISPLAY  
SLEEP  
PIP  
ABC@  
DEF  
Display function  
GHI$  
JKL%  
MNO  
If current programnumber, color  
system and soundsystem are tobe  
displayed on thescreen, press  
POR&  
STUV  
*#()  
WXYZ  
3
AUTO  
BG  
TV/AV  
SWAP  
DISPLAY button, and allthe related  
information will appearat right up  
corner of thescreen.  
P.STD  
S.STD  
CH+  
MENU  
CH-  
If the DISPLAY button is pressed  
again, the displayedinformation will disappear.  
(If the programis named, itsname will alsoappear ).  
VOL-  
VOL+  
Auto program scan  
H.LOCK  
EXIT  
CH.LIST  
TIMER ZOOM  
1 If you want to select a  
desirable program, you may  
scan all the TV programs in  
memory. You can simply press  
SCAN button to do this.  
Press scan button once, there  
are nicepictures onthe screen.  
Press scan button again, there  
are sixteen pictures on the  
screen.  
2 If you want to stop the  
function during auto tunning,  
simply press SCAN button  
again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others functions  
Sleep  
Note:  
The TV set will switch automatically to standby at the  
preset time with the SLEEP time on. You may set the  
sleep time, Operateas follows:  
The ON TIME setup and  
the SLEEP setup is  
absolute one another.  
1. Press SLEEP button repeatedly to select the number  
of preset minutes, the timer will be set in sequence:  
0Min 15Min 30Min 60Min 120Min  
240Min 0Min  
MUTE  
SCAN  
STILL  
2. After the sleep time is set, the Indication will appear  
on the screen 1minute prior to expiry of set time.  
DISPLAY  
SLEEP  
PIP  
ABC@  
DEF  
Time off  
GHI$  
JKL%  
MNO  
POR&  
STUV  
*#()  
WXYZ  
TV/AV  
SWAP  
3 If remaining timeof set timer is tobe displayed, press  
SLEEP button again.  
P.STD  
S.STD  
The TV set will switch off automatically at the preset time,  
press CH+/- button to turn on again.  
CH+  
MENU  
CH-  
VOL-  
VOL+  
4 If to cancelsleep time, pressSLEEP button repeatedly to  
set as 0.  
H.LOCK  
EXIT  
Picture Still  
CH.LIST  
TIMER ZOOM  
Press Still button, the picturewill be still;if to cancel, press Still  
button again, thepicture will resume.  
Auto switch-off function  
If an empty channel isselected or the TVprograms are  
ended forthe day, thepower willbe switchedoff 5minutes  
later automatically. If the "OFF TIME" is setting, it will be  
switched off according to the presetting time. The auto  
power offfunction does notwork undervideo input.  
Under PC state, if no signals input, the television will  
enter standbystatus 1minuteslater automatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Teletext functions  
Teletext is an information system, broadcast by certain channels,  
which can be read like a newspaper . It also provides subtitles for  
people with hearing difficulties or those who are unfamiliar with the  
language in which a particular programme is being broadcast (cable  
networks, satellite channels, etc.).  
Teletext function operation  
You can press  
button into TEXT mode,  
press again to leave TEXT mode. All menu  
related functions are not available in TEXT  
mode. Only a few direct button control  
functions are available in TEXT mode, they  
MUTE  
SCAN  
STILL  
DISPLAY  
SLEEP  
PIP  
ABC@  
DEF  
GHI$  
JKL%  
MNO  
1 Page up/down  
POR&  
STUV  
*#()  
WXYZ  
Result: Use the CH+/- buttons to browse next  
or previous page.  
TV/AV  
SWAP  
P.STD  
S.STD  
CH+  
MENU  
CH-  
VOL-  
VOL+  
2 Page number entering  
Result: To select a teletext page either directly  
enter the page number using the  
numeric button pad on the remote  
control or use CH+/- buttons, or the  
colored Fast Text buttons.  
H.LOCK  
EXIT  
CH.LIST  
TIMER ZOOM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Teletext functions  
(MIX)  
While in Teletext mode press the  
button will show the teletext data  
superimposed on top of the TV picture. Press the button again to revert  
back to Full text.  
(HOLD)  
Pressing the  
button will stop the teletext page automatically updating.  
This feature is very useful where there are several teletext pages or  
data on the same page number.  
(ZOOM)  
Pressing the  
button to change from different screen display size.  
This feature is very useful as it magnifies the image making the characters  
easier to read.  
(REVEAL)  
Pressing the  
button will reveal hidden text. This feature is used to reveal  
information such as answers to Teletext on-line interactive puzzles.  
TIMER  
While in normal TV mode only, pressing the button TIMER will display the  
teletext time in the top right corner for a few seconds.  
(TEXT)  
Press the  
button on the remote control to turn teletext On/Off.  
button will get the teletext decoder to automatically  
search for the subtitle page. In NZ the subtitle is usually page 801.  
(SUBTITLE)  
Pressing the  
(CH.LIST)  
Press the button to show the list of teletext contents  
(Fast text colored buttons)  
Fast text automatically displays the four most commonly used pages that  
the broadcaster thinks that you may want to choose next. Press the same  
coloured button on the remote control as the coloured link at the bottom  
of the teletext page to go directly to that page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
- Early malfunctions can be prevented. Careful and regular cleaning can  
extend the amount of time you will have your new TV. Be sure to turn the power  
off and unplug the power cord before you begin any cleaning.  
Cleaning the Screen  
1. Here`s agreat way tokeep the dustoff your screen for awhile. Wet a soft clothin a  
mixture of lukewarmwater and alittle fabric softeneror dish washingdetergent. Wring  
the cloth untilit`s almost dry, and thenuse it towipe the screen.  
2. Make surethe excess wateris off the screen, andthen let itair-dry before youturn on  
your TV.  
Cleaning the Cabinet  
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure  
not to use a wet cloth.  
Extended Absence  
If you expectto leave yourTV dormant for a longtime (such asa vacation), it`sa good  
idea to unplugthe power cordto protect againstpossible damage fromlightning or  
power surges.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications and functions  
P42LV6-T1  
P50V6-A8  
Type  
PLASMA DISPLAY PANEL  
Viewing angle  
Diagonal  
Screen  
>170 (H)/170 (V)  
42  
50  
PAL, SECAM, NTSC-M  
D/K B/G  
Color system  
Sound system  
Video input  
I
M
TV/VIDEO  
SCART (CVBS, Y/C, RGB), YCbCr  
480i/p, 576i/p, 720p, 1080i  
YPbPr  
DTV YCbCr  
Sound UPO  
Power  
2x7W  
2x10W  
~ 150-240V 50/60Hz  
Dimensions (WxHxD)mm  
(With stand  
1050X320X750  
Max.320W  
1495X440X895  
Max.450W  
Power consumption  
Standby consumption  
3W  
Working temperature: 5 ~35  
Working humidity: 20%-80%  
Store temperature: -15 ~45  
Store humidity: 5%~90%  
Condition  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
For the sake of time and cost, it is strongly recommended that you check out  
the problem by yourself according to the instructions listed hereunder before  
contacting the after-sales service for technical assistance.  
Verify if the television is properly plugged.  
Verify if the television is properly supplied power.  
Verify if electricity is available.  
No picture, no sound  
Blank screen  
Verify if correct signals are input.  
Press TV/AV button to change signal input to TV input.  
Restart the television of power supply is interrupted.  
Press Mute button and verify if Mute mode is set.  
Switch to other channel and verify if the same problem  
happens.  
No sound  
Press VOL+ button to see if the problem can be solved.  
Verify if sound system is correct. Refer to some chapter  
for adjust.  
Poor sound  
Verify if correct channel is selected.  
Adjust the antenna.  
Make adjustments by Fine Tune and Manual Search.  
No picture in some  
channel  
Verify if the same problem exists in other channels.  
Check out of picture and sound systems.  
Refer to relative instructions in the Manual for color  
adjust.  
No color for some  
channel program  
(black and white)  
Verify if the antenna is correctly connected.  
Verify if the antenna is in good condition.  
Make fine adjustment of channel.  
Spots with some or  
all pictures  
Check for local interference such as an electrical  
appliance or power tool.  
Horizontal/vertical bars  
or picture shaking  
Disconnect the television from power supply and, 10  
seconds later, connect the television to the power supply.  
If the problem still exists, contact authorized after-sales  
service for technical assistance.  
Television out of control  
Note: Do not leave the television with static picture in an extended period as it may result in  
residual image on your television screen.  
Note: Production of the plasma screen requires high and precision technologies. However,  
there might be some dark or bright (red, blue or green) spots, or some anomalistic stripes or  
spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where the air  
pressure is below 750hpa, the picture on the plasma screen may be affected and a muffled sound might  
be produced. These phenomena might happen in the area 1,500 meters above the sea level. This is  
resulted from difference between air pressures inside and outside the display. This is not a defect covered by  
the limited warranty.  
NOTE: Design and specifications are subject to change without notice.  
The dimension in this manual is a approximation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
0090506971G 02  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grindmaster Coffee Grinder AT 3WR User Manual
Grizzly DVD VCR Combo G0615 G0616 User Manual
Grizzly Planer G9979 User Manual
Grizzly Saw G0502 User Manual
Haier Saw 1407 User Manual
Hotpoint Dishwasher HDA3500NBB User Manual
Hotpoint Range SBS 51 X User Manual
HP Hewlett Packard Computer Drive MSL6000 series User Manual
HP Hewlett Packard Stereo System 8654A User Manual
IBM Network Card DAS16 User Manual