Use and Care for Can Openers
840055600
Download from Www.Somanuals.com. All Manuals Search And Download.
7. The motor will begin turning can and cutting lid. (It is
not necessary to hold the piercing lever down or to
hold the can during the cutting action.)
2. Remove complete cutting
assembly as shown. Push
piercing lever up and to the
left. It will pop out of a
locked position.
8. The motor will automatically stop when the can is open.
3. Wash cutting assembly in
hot, soapy water. Rinse and
dry thoroughly.
4. Wipe body of can opener
with damp cloth. NEVER
immerse the can opener
in water.
5. To reassemble, place knob
on back of cutting assembly
into large end of keyhole as
shown. Push to the right until
it snaps into place.
Hints for Best Use
• The can opener will easily open all standard size cans.
• On some models it will be necessary to position can
opener at edge of counter, allowing for clearance to
open cans taller than the can opener.
• If there is a bump, dent, or heavy seam in the rim of the
can, open the other end of the can or start cutter just
beyond it.
• Cans made with aluminum lids will not adhere to the
magnet.
• The motor of your can opener is permanently lubricated
and will require no oiling.
• To use the cord storage on the back of the opener, push
in or pull out the cord as needed.
Sharpening Knives
This feature on selected models.
Cleaning Your Can Opener
1. Unplug cord from electrical outlet.
1. Place cutting edge of knife in the knife slot located on
the back of the can opener.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Draw the knife blade through
the slot several times.
NOTE: Serrated blades should
never be inserted into this unit.
Warranty
TWO YEAR LIMITED WARRANTY
Hamilton Beach/Proctor-Silex, Inc. warrants this appliance to be free from defects in
material and workmanship for a period of two (2) years from the date of original
purchase, except as noted. There is no warranty with respect to the following, which
may be supplied with this appliance: glass parts, glass containers, cutter/strainer,
nonstick soleplate and/or nonstick cooking surfaces. This warranty extends only to
the original consumer purchaser and does not cover damage from abuse, neglect, use
for commercial purposes, or any other use not found in the printed directions.
HAMILTON BEACH/PROCTOR-SILEX, INC. EXPRESSLY DISCLAIMS ALL RESPONSIBILITY
FOR CONSEQUENTIAL DAMAGES OR INCIDENTAL LOSSES CAUSED BY USE OF
THIS APPLIANCE. Some states or provinces do not allow this exclusion or limitation
of incidental or consequential losses, so the foregoing disclaimer may not apply to
you. If you have a claim under this warranty, DO NOT RETURN THE APPLIANCE TO
THE STORE! Please call our CUSTOMER SERVICE NUMBER. (For faster service
please have model and serial numbers ready for operator to assist you.)
In the U.S. 1-800-851-8900
In Canada 1-800-267-2826
This warranty gives you specific legal rights, and you may also have other legal rights
which vary from state to state, or province to province.
HAMILTON BEACH PROCTOR-SILEX,INC.
Washington, North Carolina 27889
PROCTOR-SILEX CANADA,INC.
Picton, Ontario K0K 2T0
840055600
1/99
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|