hp LaserJet
1150 1300 1300n
use
Download from Www.Somanuals.com. All Manuals Search And Download.
hp LaserJet 1150 and
hp LaserJet 1300 series printer
user guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
Trademark Credits
Copyright Hewlett-Packard Company 2003
Microsoft®, Windows®, and Windows NT®
are U.S. registered trademarks of Microsoft
Corporation.
All Rights Reserved. Reproduction,
adaptation, or translation without prior written
permission is prohibited, except as allowed
under the copyright laws.
Energy Star® and the Energy Star logo® are
U.S. registered marks of the United States
Environmental Protection Agency.
A user of the Hewlett-Packard printer
associated with this user guide is granted a
license to: a) print hard copies of this user
guide for PERSONAL, INTERNAL or
COMPANY use subject to the restriction not to
sell, re-sell or otherwise distribute the hard
copies; and b) place an electronic copy of this
user guide on a network server, provided
access to the electronic copy is limited to
PERSONAL, INTERNAL users of the
Hewlett-Packard printer associated with this
user guide.
Netscape is a U.S. trademark of Netscape
Communications Corporation.
UNIX® is a registered trademark of The Open
Group.
All other products mentioned herein may be
trademarks of their respective companies.
The information contained in this document is
subject to change without notice.
Part number: Q1334-90941
Edition 2: 4/2009
Hewlett-Packard Company
11311 Chinden Boulevard
Boise, Idaho 83714 U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick access to more information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Printer features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Priority input tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Printer media guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Straight-through output path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Print cartridge access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Printer software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Supported operating systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Software for Macintosh computers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
hp LaserJet 1150 printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PostScript Printer Description files (PPDs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Printer connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Parallel connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ENWW
Contents iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing paper and other media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Priority input tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Specific types of media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Printing on transparencies or labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Printing on envelopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Printing one envelope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Printing multiple envelopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Printing on letterhead and preprinted forms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Printing multiple pages on a single sheet of paper (N-up printing). . . . . . . . . . . . . . . . . . . . . 38
Accessing the multiple pages per sheet feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Printing booklets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
HP policy on non-HP print cartridges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Storing print cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Print cartridge life expectancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Redistributing toner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Changing the print cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Cleaning the printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Cleaning the printer media path. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Printer information pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Configuration page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Supported operating systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Supported browsers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
hp toolbox sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Status tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
iv Contents
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Documentation tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Network window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Settings tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Finding the solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Selecting an Alternate PostScript Printer Description (PPD)
for the hp LaserJet 1300 series printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Improving print quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Loose toner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Vertical repetitive defects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Curl or wave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Toner scatter outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Cleaning the pickup roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Changing the printer separation pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
FCC compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Environmental product stewardship program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Protecting the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Material safety data sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Canadian DOC regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
ENWW
Contents v
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported media sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Guidelines for using media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Transparencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Envelopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Hewlett-Packard software license agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Hewlett-Packard limited warranty statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Limited warranty for print cartridge life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Installing a shared printer on Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Installing a memory DIMM (1300 series only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Installing the print server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Using the print server’s embedded Web server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Troubleshooting the print server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
vi Contents
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick access to more information
WWW links for drivers, software, and support
If you need to contact HP for service or support, use one of the following links:
hp LaserJet 1150 printer
●
In the United States, see http://www.hp.com/support/lj1150
In other countries/regions, see http://www.hp.com
●
hp LaserJet 1300 series printer
●
In the United States, see http://www.hp.com/support/lj1300
In other countries/regions, see http://www.hp.com
●
User guide links
●
●
●
●
●
Index
Where to look for more information
●
●
●
CD user guide: Detailed information on using and troubleshooting the printer. Available on
the CD-ROM that came with the printer.
Online Help: Information on printer options that are available from within printer drivers. To
view a Help file, access the online Help through the printer driver.
HTML (online) user guide: Detailed information on using and troubleshooting the printer.
connected, select Manuals.
2 Chapter 1
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer configurations
Below are the standard configurations for the HP LaserJet 1150 and 1300 series printers.
hp LaserJet 1150
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
18 ppm for letter-size paper, 17 ppm for A4-size paper
First page out in less than 10 seconds
600 x 2 dpi (FastRes 1200) resolution
250-sheet enclosed input tray
10-sheet priority input tray
8 MB RAM
2500-page print cartridge
PCL 5e
Host-based printing
USB
1284-B parallel port
Windows 98, Me, 2000, XP
Mac OS 9.x
Mac OS X v10.1 and v10.2
Network and wireless printing options
Power switch
HP toolbox provides printer status information, troubleshooting information, and printer
configuration information
●
26 PCL fonts
ENWW
Printer configurations 3
Download from Www.Somanuals.com. All Manuals Search And Download.
hp LaserJet 1300
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
20 ppm for letter-size paper, 19 ppm for A4-size paper
First page out in less than 10 seconds
1200 dpi (ProRes 1200) resolution
250-sheet enclosed input tray
10-sheet priority feed tray
Optional additional 250-sheet input tray
16 MB RAM
Memory is upgradeable to 80 MB
4000- or 2500-page print cartridge
PCL 6 and PCL 5e and PostScript® 2 emulation
USB
1284-B parallel port (through LIO connectivity card)
Windows 98, Me, 2000, XP
Mac OS 9.x
Mac OS X v10.1 and v10.2
Internal LIO network and wireless printing options
Power switch
45 PCL fonts
35 PS fonts
hp LaserJet 1300n
The HP LaserJet 1300n printer includes all the features of the 1300 model, plus an HP Jetdirect
print server network card.
4 Chapter 1
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer features
Congratulations on the purchase of your new product. The HP LaserJet 1150 and
HP LaserJet 1300 series printers provide the following benefits.
Print with excellent quality
●
●
●
●
Print 1200 dots per inch.
For the HP LaserJet 1150 printer, host-based and PCL 5e drivers are available.
For the HP LaserJet 1300 series printer, PCL 5e, PCL 6, and PS drivers are available.
The printer automatically determines and switches to the appropriate language for the print
job.
Save time
●
Fast printing at up to 18 pages per minute (ppm) for the HP LaserJet 1150 printer and up to
20 ppm for the HP LaserJet 1300 series printer.
●
No waiting. The first page is out in less than 10 seconds.
Save money
●
Use EconoMode to save toner.
●
Print multiple pages on a single sheet of paper (N-up printing).
Create professional documents
●
Use watermarks, such as Confidential, to protect your documents.
●
Print booklets. You can use this feature to easily print the pages in the order required to create
cards or books. Once printed, all you have to do is fold and staple the pages.
●
Print the first page on different media than the rest of the pages.
ENWW
Printer features 5
Download from Www.Somanuals.com. All Manuals Search And Download.
1
7
2
6
3
4
5
1
2
3
4
5
Straight-through output door
On/off switch
Power receptacle
USB port
Parallel port (HP LaserJet 1150 printer)
LIO connectivity slot (HP LaserJet 1300 series)
6
7
HP Jetdirect print server (HP LaserJet 1300n printer only)
Parallel LIO adaptor (HP LaserJet 1300 series only)
ENWW
Walk around 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer control panel
The printer control panel is comprised of two lights and one lighted button. These lights produce
patterns that identify your printer’s status.
1
2
3
1
2
Ready light: Indicates that the printer is ready to print.
Go button and light: To print a demo page or to continue printing while in manual feed mode,
press and release the Go button. To print a configuration page, press and hold the Go button
for 5 seconds.
3
Attention light: Indicates printer media input tray is empty, print cartridge door is open, print
cartridge is missing, or other errors.
Note
8 Chapter 1
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Media paths
Main input tray
The enclosed main input tray, located in front of the printer, holds up to 250 sheets of 20 lb paper,
multiple envelopes, or other media.
Priority input tray
You should use the priority input tray when feeding up to 10 sheets of 20 lb paper or when printing
single envelopes, postcards, labels, or transparencies. You can also use the priority input tray to
print the first page on different media than the rest of the document.
Note
The printer automatically prints from the priority input tray before printing from the main input tray.
Printer media guides
Both input trays have side media guides. The main input tray also has a rear media guide. Media
guides ensure that the media is correctly fed into the printer and that the print is not skewed
(crooked on the media). When loading media, adjust the media guides to match the width and
length of the media that you are using.
ENWW
Media paths 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Straight-through output path
The straight-through output path is useful when you are printing envelopes, transparencies, heavy
media, or any media that tends to curl when printed. Printed media exits in reverse order when the
straight-through output door is open.
Note
Printed media does not stack when you use the straight-through output path. The media drops to
the surface below unless you remove each sheet as it exits the printer.
Output bin
The output bin is located on the top of the printer. Printed media is collected here in the correct
sequence when the straight-through output door is closed. Use the output bin when printing
normal and large, collated documents.
10 Chapter 1
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Print cartridge access
Print cartridge door
The print cartridge door is located on the front of the printer. You must open the print cartridge door
to access the print cartridge, clear jams, and clean the printer. To open the print cartridge door,
firmly grasp the left and right sides and pull the print cartridge door toward you.
Note
You will feel some resistance when opening the print cartridge door. Opening the print cartridge door
conveniently lifts the print cartridge for easy removal.
ENWW
Print cartridge access 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer software
Supported operating systems
For easy printer setup and access to the full range of printer features, HP strongly recommends
that you install the software provided. Not all software is available in all languages. Install the
software before setting up the printer. See the Readme for the latest software information.
The most recent drivers, additional drivers, and other software are available from the Internet and
other sources.
The printer comes with software for the following operating systems:
●
●
●
●
●
●
Windows 98
Windows Me
Windows 2000
Windows XP (32-bit)
Mac OS 9.x
Mac OS X v10.1 and v10.2 (Apple encourages OS X v10.0 users to upgrade to v10.1)
Installing printer software
To install printer software for Windows 95 and Windows NT 4.0
To install the printer software for Windows 95 and Windows NT 4.0, you must use the Add Printer
Wizard.
1
2
3
4
5
6
Click Start, and then point to Settings.
Click Printers.
Double-click Add Printer.
Select the port that the printer is connected to, and click Next.
Click Have Disk. Click Browse.
On the CD-ROM, browse to the driver you want to install as follows:
a
b
c
d
e
f
Select your language from the directory list, and double-click.
Select drivers from the directory list, and double-click.
Select your operating system from the directory list, and double-click.
Select the driver from the directory list, and double-click.
Click OK to select the INF file.
Click the HP LaserJet 1150 or HP LaserJet 1300 series printer, and click OK to begin the
installation.
7
Follow the on-screen instructions to complete the software installation.
To install printer software for all other operating systems
Insert the software CD that came with the printer into the computer CD-ROM drive. Follow the
on-screen installation instructions.
Note
If the Welcome screen does not open, click Start on the Windows task bar, click Run, type Z:\setup
(where Z is your CD drive letter), and click OK.
12 Chapter 1
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer properties (driver)
Printer properties control the printer. You can change the default settings, such as media size
and type, printing multiple pages on a single sheet of media (N-up printing), resolution,
and watermarks. You can access the printer properties in the following ways:
●
Through the software application that you are using to print. This only changes the settings
for the current software application.
®
●
Through the Windows operating system. This changes the default settings for all future
print jobs.
Note
Note
Because many software applications use a different method of accessing the printer properties,
the following section describes the most common methods used in Windows 98, 2000, Millennium,
and Windows XP.
To only change the settings for the current software application
Although the steps can vary between software applications, this is the most common method.
1
2
3
From the File menu in the software application, click Print.
On the Print dialog, click Properties.
Change the settings, and click OK.
To change the default settings for all future print jobs in Windows 98, 2000,
and Millennium
1
2
3
4
In the Windows system tray, click Start, select Settings, and click Printers.
Right-click the HP LaserJet 1150 or HP LaserJet 1300 series printer icon.
Click Properties, (in Windows 2000, you can also click Printing Preferences).
Change the settings, and click OK.
Note
In Windows 2000, many of these features are available from the Printing Preferences menu.
To change the default settings for all future print jobs in Windows XP
1
2
3
4
5
6
In the Windows system tray, click Start, and click Control Panel.
Double-click Printers and Other Hardware.
Click Printers and Faxes.
Right-click the HP LaserJet 1150 or HP LaserJet 1300 series printer icon.
Click Properties, or click Printing Preferences.
Change the settings, and click OK.
ENWW
Printer software 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Print setting priorities
There are three ways to change print settings for this printer: in the software application, in the
printer driver, and in the HP toolbox. For the HP LaserJet 1300 series printer, you can also change
print settings through the embedded Web server. Changes made to print settings are prioritized
according to where the changes are made, as follows:
●
●
●
Changes made in the software application override settings changed anywhere else. Within a
software application, changes made in the Page Setup dialog box override changes made in
the Print dialog box.
Changes made in the printer driver (Printer Properties dialog box) override settings in the
HP toolbox. Changes made in the printer driver do not override settings in the software
application.
Changes made in the HP toolbox and the embedded Web server have the lowest priority.
If a particular print setting can be changed in more than one of the ways listed above, use the
method that has the highest priority.
Printer properties online help
The printer properties (driver) online help includes specific information about the functions in the
printer properties. This online help guides you through the process of changing your printer’s
default settings. For some drivers, online Help gives instructions on using context-sensitive Help.
Context-sensitive Help describes the options for the driver feature you are currently accessing.
To access the printer properties online help
1
2
From the software application, click File, and then click Print.
Click Properties, and then click Help.
14 Chapter 1
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Software for Windows
When you install the software for Windows, you can directly connect the printer to a computer
using a USB cable, parallel cable, or using wireless technology. For the HP LaserJet 1300n printer,
you can connect the printer to the network using an HP Jetdirect print server card.
The following software is available to all users of the printer, whether you connected the printer
directly to a computer using a USB cable, parallel cable, wireless technology, or whether you
connected the printer to the network using an HP Jetdirect print server card.
Printer drivers
A printer driver is the software component that provides access to printer features and provides
the means for the computer to communicate with the printer. Choose a printer driver based on the
way you use the printer.
●
●
Use the host-based printer driver to optimize performance. (HP LaserJet 1150 printer only).
Use the PCL 5e printer driver if you need print results to look consistent with those from older
HP LaserJet printers. Certain features are not available in this printer driver. (Do not use the
PCL 5e driver for this printer with older printers.)
●
●
Use the PCL 6 printer driver to take full advantage of the printer features. Unless complete
backward compatibility with previous PCL drivers or older printers is necessary, the PCL 6
driver is recommended (HP LaserJet 1300 series only).
Use the PS printer driver for compatibility with PostScript® needs. Certain printer features are
not available in this printer driver (HP LaserJet 1300 series only).
The printer automatically switches between PS and PCL printer languages depending on the
driver you have selected.
Available printer drivers
The following printer drivers are included with the printer.
Available printer drivers
HP LaserJet 1150 printer
HP LaserJet 1300 series printer
●
●
host-based
PCL 5e
●
●
●
PCL 5e
PCL 6
PS
ENWW
Software for Windows 15
Download from Www.Somanuals.com. All Manuals Search And Download.
hp toolbox
You can view the HP toolbox when the printer is directly connected to your computer or when it is
connected to a network. You must have performed a complete software installation to use the
HP toolbox.
The HP toolbox is a Web application that you can use for the following tasks:
●
●
●
●
Check the printer status.
Configure the printer settings.
View troubleshooting information.
View online documentation.
Embedded Web server (hp LaserJet 1300 series only)
The embedded Web server is available for HP LaserJet 1300 series printers with LIO network
connections.
With the embedded Web server, you can gain access to the printer settings and information by
typing an IP address or hostname of the printer in a Web browser (such as Netscape Navigator
or Microsoft Internet Explorer) on any computer. You can use the embedded Web server to
configure the printer, view status information, and obtain troubleshooting information.
TM
The embedded Web server works with the following supported web browsers:
●
●
Internet Explorer 5.0 (and later)
Netscape Navigator 4.75 (and later)
16 Chapter 1
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Software for Macintosh computers
hp LaserJet 1150 printer
Accessing the print driver (Mac OS 9.x)
1
2
3
From the Apple menu, select the Chooser.
Click the HP LaserJet icon in the left side of the Chooser dialog box.
Select either USB or AppleTalk, depending on how the computer and printer are connected.
Note
If you are using AppleTalk, you might also need to select the correct Zone from the second menu list.
4
5
Click the HP LaserJet 1150 printer name in the right side of the Chooser dialog box.
Do one of the following, depending on how the computer and the printer are connected:
• USB: Go to step 6.
• AppleTalk: Click Setup, and then select the correct printer type.
6
Close the Chooser.
Accessing the print driver (Mac OS X v10.1)
1
2
3
4
5
Click the hard drive icon on the desktop.
Click Applications, and then click Utilities.
Click Print Center.
Click Add Printer. The Add Printer List dialog box appears.
Select USB or AppleTalk from the top menu.
Note
If you are using AppleTalk, you might also need to select the correct Zone from the second menu list.
6
7
Select the printer name from the printer list.
Click Add.
Accessing the print driver (Mac OS X v10.2)
Follow the steps for v10.1 above. In step 5, select Directory Services to use the “Rendezvous”
feature.
ENWW
Software for Macintosh computers 17
Download from Www.Somanuals.com. All Manuals Search And Download.
hp LaserJet 1300 series printer
Accessing the print driver (Mac OS 9.x)
1
2
3
4
5
6
7
8
9
Click the hard drive icon on the desktop.
Click Applications, and then click Utilities.
Launch the Desktop Printer utility.
Click Printer (USB).
In the Printer USB section of the dialog box, click Change.
Select the HP LaserJet 1300 printer.
Click Auto Setup.
Click Create at the bottom of the Window.
Click Save.
Accessing the print driver (Mac OS X v10.1)
1
2
3
4
5
Click the hard drive icon on the desktop.
Click Applications, and then click Utilities.
Click Print Center.
Click Add Printer. The Add Printer List dialog box appears.
Select USB or AppleTalk from the top menu.
Note
If you are using AppleTalk, you might also need to select the correct Zone from the second menu list.
6
7
Select the printer name from the printer list.
Click Add.
Accessing the print driver (Mac OS X v10.2)
Follow the steps for v10.1 above. In step 5, select Directory Services to use the “Rendezvous”
feature.
PostScript Printer Description files (PPDs)
PPDs, in combination with the Apple printer driver, access the printer features and allow the
computer to communicate with the printer. An installation program for the PPDs is provided on the
HP LaserJet 1300 series printer CD.
18 Chapter 1
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Software for network installations only
This software is available only when the printer is connected to a network.
hp Web Jetadmin
HP Web Jetadmin is intended for printer management in commercial and enterprise networks.
While the embedded Web server is used to manage a single printer, HP Web Jetadmin is used to
manage groups of printers and other devices. Download this software from the HP website at
http://www.hp.com/go/webjetadmin. The HP Web Jetadmin website provides HP Web Jetadmin
software in many languages.
HP Web Jetadmin is available only if the printer is connected to an IP-based network. This
browser-based software can be installed on one of the following supported platforms:
●
●
●
●
●
Microsoft Windows NT 4.0, XP, or 2000
HP-UX
Sun Solaris
Red Hat Linux
SuSE Linux
Starting hp Web Jetadmin
Once you install the HP Web Jetadmin software, you can start it in a supported Web browser on
any computer by typing one of the following URLs:
●
http://server.domain:port/
where “server.domain” is the server hostname and “port” is the port number that you entered
during installation. (The default port is 8000.) This information is available in the url.txt file,
which is stored in the folder where HP Web Jetadmin is installed.
●
http://ipaddress:port/
where “ipaddress” is the IP address of the computer where HP Web Jetadmin is located.
For settings that appear in both the printer driver and HP Web Jetadmin, changes made in the
printer driver override changes made in HP Web Jetadmin.
ENWW
Software for network installations only 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer connections
USB connections
All HP LaserJet 1150 and HP LaserJet 1300 series printer models support USB connections. The
USB port is on the back of the printer.
Connecting the USB cable
Plug the USB cable into the printer. Plug the other end of the USB cable into the computer.
20 Chapter 1
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Parallel connections
All HP LaserJet 1150 and HP LaserJet 1300 series printer models support parallel connections.
For the HP LaserJet 1300 series printer, the parallel port is in a low-cost input/output (LIO) adaptor
that connects to the back of the printer. Use an IEEE 1284-compliant parallel cable.
Connecting the parallel cable for the hp LaserJet 1150 printer
Connect the parallel cable to the printer. Connect the other end of the parallel cable to the
computer.
Connecting the parallel cable for the hp LaserJet 1300 series printer
1
2
Insert the parallel LIO adaptor into the LIO connectivity slot on the back of the printer.
Connect the parallel cable to the adaptor. Connect the other end of the parallel cable to the
computer.
ENWW
Printer connections 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Network connections
The HP LaserJet 1300n printer also supports network connections with an HP Jetdirect print
server. This print server is optional for the HP LaserJet 1300 printer. To order the print server, see
Connecting to the network
1
2
Insert the HP Jetdirect print server into the LIO connectivity slot on the back of the printer.
Connect one end of a network cable to the print server, and connect the other end to the
network. Be sure to install the printer driver on all computers that connect to the network.
Wireless connections
The HP LaserJet 1150 and HP LaserJet 1300 series printer models also support the
IEEE 802.11b standard for wireless networking and Bluetooth wireless connectivity options. The
available HP Jetdirect wireless print servers and HP Bluetooth printer adaptors attach on the back
of the printer to either the USB port, the parallel port, or the LIO connectivity slot (for the
HP LaserJet 1300 series).
For a complete list of available HP Jetdirect wireless print servers and HP Bluetooth adaptors, see
22 Chapter 1
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing paper and other media
HP LaserJet printers produce excellent print quality documents. You can print on a variety of
media, such as paper (including up to 100% recycled fiber content paper), envelopes, labels,
transparencies, and custom-sized media. The following are the supported media sizes:
●
●
Minimum: 76 by 127 mm (3 by 5 in.)
Maximum: 216 by 356 mm (8.5 by 14 in)
Properties such as weight, grain, and moisture content are important factors that affect printer
performance and quality. To achieve the best possible print quality, only use high-quality media
specifications.
Note
Always test a sample of the media before you purchase large quantities. Your media supplier should
understand the requirements specified in the HP LaserJet printer family print media guide (HP part
24 Chapter 2
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Media to avoid
The HP LaserJet 1150 and 1300 series printers can handle many types of media. Use of media
outside the printer’s specifications will cause a loss of print quality and increase the chance of
paper jams occurring.
●
●
●
●
Do not use paper that is too rough.
Do not use paper with cutouts or perforations other than standard 3-hole punched paper.
Do not use multipart forms.
Do not use paper with a watermark if you are printing solid patterns.
Media that may damage the printer
In rare circumstances media can damage the printer. The following media must be avoided to pre-
vent possible damage:
●
●
Do not use media with staples attached.
Do not use transparencies designed for inkjet printers or other low temperature printers. Use
only transparencies that are specified for use with HP LaserJet printers.
●
●
Do not use photo paper intended for inkjet printers.
Do not use paper that is embossed or coated and is not designed for the temperatures of the
printer’s image fuser. Select media that can tolerate temperatures of 200° C (392° F) for 0.1
second. HP produces a selection of media that is designed for the HP LaserJet 1150 and
1300 series printers.
●
●
Do not use letterhead paper with low temperature dyes or thermography. Preprinted forms or
letterhead must use inks that can tolerate temperatures of 200° C (392° F) for 0.1 second.
Do not use any media that produces hazardous emissions, or that melts, offsets, or discolors
when exposed to 200° C (392° F) for 0.1 second.
ENWW
Choosing paper and other media 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Optimizing print quality for media types
Media type settings control the temperature of your printer’s fuser. You can change the settings for
the media that you are using to optimize the print quality.
You can access the optimizing feature from the Paper tab in your printer driver or from
HP Toolbox.
Printing speeds are automatically reduced when printing special-sized media.
26 Chapter 2
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading media into the input trays
Main input tray
The main input tray holds up to 250 pages of 20 lb paper or fewer pages of heavier media (25 mm
or less stack). Load media with the top forward and the side to be printed facing up. To prevent
jams and skewing, always adjust the side and rear media guides.
Priority input tray
The priority input tray holds up to 10 pages of 20 lb paper or one envelope, transparency, or card.
Load media with the top forward and the side to be printed facing up. To prevent jams and
skewing, always adjust the side media guides.
CAUTION
Note
If you try to print on media that is wrinkled, folded, or damaged in any way, a jam might occur. See
When you add new media, make sure that you remove all of the media from the input tray and
straighten the stack of new media. This helps prevent multiple sheets of media from feeding through
the printer at one time, reducing media jams.
Specific types of media
●
●
●
●
Transparencies and labels: Load transparencies and labels with the top forward and the
Envelopes: Load envelopes with the narrow, stamp side forward and the side to be printed
Letterhead or preprinted forms: Load with the top forward and the side to be printed facing
Cards and custom-sized media: Load with the narrow side forward and the side to be
ENWW
Loading media into the input trays 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing on transparencies or labels
Only use transparencies and labels that are recommended for use in laser printers, such as
information.
CAUTION
CAUTION
Be sure to set the correct media type in the printer settings as instructed below. The printer adjusts
the fuser temperature according to the media type setting. When printing on special media such as
transparencies or labels, this adjustment prevents the fuser from damaging the media as it passes
through the printer.
Inspect the media to make sure that it is not wrinkled or curled and that it does not have any torn
edges or missing labels.
To print transparencies or labels
1
2
Open the straight-through output door.
Load a single page in the priority input tray or load multiple pages in the main input tray. Make
sure that the top of the media is forward and the side to be printed (rough side) is facing up.
3
4
Adjust the media guides.
Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer
5
On the Paper/Quality tab or the Paper tab (the Paper Type/Quality tab for some Mac
drivers), choose the correct media type.
Note
Not all printer features are available from all drivers or operating systems. See the printer properties
(driver) online Help for information about availability of features for that driver.
6
Print the document. Remove the media from the back of the printer as it prints to prevent it
from sticking together and place the printed pages on a flat surface.
28 Chapter 2
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing on envelopes
Printing one envelope
more information.
Note
Use the priority input tray for printing one envelope. Use the main input tray for printing multiple
envelopes.
1
To prevent the envelopes from curling as they print, open the straight-through output door.
2
Before loading the envelopes, slide the media guides outward to slightly wider than the
envelopes.
ENWW
Printing on envelopes 29
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Place the envelope with the side to be printed facing up and the top edge along the left media
guide.
Note
If the envelope has a flap on the short edge, feed that edge into the printer first.
4
Adjust the media guides to the length and width of the envelope.
5
6
Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer
On the Paper/Quality tab or the Paper tab (the Paper Type/Quality tab for some Mac
drivers), select Envelope as the media type.
Note
Not all printer features are available from all drivers or operating systems. See the printer properties
(driver) online Help for information about availability of features for that driver.
30 Chapter 2
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing multiple envelopes
more information.
Note
Use the priority input tray for printing one envelope. Use the main input tray for printing multiple
envelopes.
1
To prevent the envelopes from curling as they print, open the straight-through output door.
2
Before loading the envelopes, slide the media guides outward to slightly wider than the
envelopes.
3
Place the envelopes with the side to be printed facing up and the top edge along the left media
guide. Stack up to 30 envelopes.
Note
If the envelopes have a flap on the short edge, feed that edge into the printer first.
ENWW
Printing on envelopes 31
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Adjust the media guides to the length and width of the envelopes.
5
6
Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer
On the Paper/Quality tab or the Paper tab (the Paper Type/Quality tab for some Mac
drivers), select Envelope as the media type.
Note
Not all printer features are available from all drivers or operating systems. See the printer properties
(driver) online Help for information about availability of features for that driver.
7
Replace the priority input tray.
32 Chapter 2
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing on letterhead and preprinted forms
To print letterhead or preprinted forms
1
Load the paper with the top forward and the side to be printed facing up. Adjust the media
guides to fit the width of the paper.
2
Print the document.
Note
To print a single-page cover letter on letterhead, followed by a multiple-page document, load the
letterhead in the priority input tray and load the standard paper in the main input tray. The printer
automatically prints from the priority input tray first.
ENWW
Printing on letterhead and preprinted forms 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing on custom-sized media and cardstock
The HP LaserJet 1150 and 1300 series printers can print on custom-sized media or cardstock
between 76 by 127 mm (3 by 5 inches) and 216 by 356 mm (8.5 by 14 inches). Depending on the
media, you can print up to 10 sheets from the priority input tray. Use the main input tray for multiple
sheets.
CAUTION
Make sure that the sheets are not stuck together before you load them.
To print on custom-sized media or cardstock
1
2
Open the straight-through output door.
Load the media with the narrow side forward and the side to be printed facing up.
Adjust the side and rear media guides to fit the media.
3
4
5
Select the correct size in the printer settings. (Software settings can override printer
properties.
Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer
On the Paper/Quality tab or the Paper tab (the Paper Type/Quality tab for some Mac
drivers), select the custom size option. Specify the dimensions of the custom-sized media.
Note
Not all printer features are available from all drivers or operating systems. See the printer properties
(driver) online Help for information about availability of features for that driver.
6
Print the document.
34 Chapter 2
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual feed
You can use manual feed when printing mixed media, for example, an envelope, then a letter, then
an envelope, and so on. Load an envelope in the priority input tray and load letterhead in the main
input tray. You can also use manual feed to protect your privacy when printing to a network printer.
To print using manual feed, access the printer properties or printer setup in your software
time to print.
36 Chapter 3
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing watermarks
You can use the watermark option to print text ”underneath” (in the background) of an existing
document. For example, you might want to have large gray letters reading Draft or Confidential
printed diagonally across the first page or all of the pages of a document.
Accessing the watermark feature
1
From your software application, access the printer properties (or printing preferences in
2
On the Effects tab (the Watermark/Overlay tab for some Mac drivers), select the watermark
you want to use.
Note
Not all printer features are available from all drivers or operating systems. See the printer properties
(driver) online Help for information about availability of features for that driver.
ENWW
Printing watermarks 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing multiple pages on a single sheet of paper (N-up printing)
You can select the number of pages that you want to print on a single sheet of paper. If you choose
to print more than one page per sheet, the pages appear smaller and are arranged on the sheet in
the order that they would otherwise be printed.
Accessing the multiple pages per sheet feature
1
From your software application, access the printer properties (or printing preferences in
2
On the Finishing tab (the Layout tab for some Mac drivers), select the correct number of
pages per sheet.
Note
Not all printer features are available from all drivers or operating systems. See the printer properties
(driver) online Help for information about availability of features for that driver.
3
There is also a check box for page borders and a pull-down menu to specify the order of
pages printed on the sheet.
38 Chapter 3
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing on both sides of the paper (manual duplexing)
To print on both sides of the paper (manual duplexing), you must run the paper through the printer
twice. You can print using the media output bin or the straight-through output path.
Hewlett-Packard recommends that you use the media output bin for lightweight paper and use the
straight-through output path for any heavy media or media that curls when printed.
Note
Manual duplex using the top output bin
1
Make sure that the straight-through output door is closed.
2
Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer
3
4
On the Device Settings tab, select the option to allow manual duplexing.
On the Finishing tab (the Paper Type/Quality tab for some Mac drivers), select the option to
Print on Both Sides. Ensure that Straight Paper Path is not checked.
5
Print the document.
Note
Not all printer features are available from all drivers or operating systems. See the printer properties
(driver) online Help for information about availability of features for that driver.
ENWW
Printing on both sides of the paper (manual duplexing) 39
Download from Www.Somanuals.com. All Manuals Search And Download.
6
After side one has printed, remove the remaining paper from the input tray, and set it aside
until after you finish your manual duplexing job.
7
Gather the printed pages, and straighten the stack.
8
Place the stack back in the input tray. Side one should be facing down with the bottom edge
feeding into the printer first. Replace the priority input tray.
Click OK (on screen), and wait for side two to print.
40 Chapter 3
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual duplex on heavy media or card stock
For heavy media, such as card stock, use the straight-through output path.
1
Load the media, and open the straight-through output door.
2
Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer
3
4
On the Device Settings tab, select the option to allow manual duplexing.
On the Finishing tab (the Paper Type/Quality tab for some Mac drivers), select the option to
Print on Both Sides. Ensure that Straight Paper Path is checked.
5
Print the document.
Note
Not all printer features are available from all drivers or operating systems. See the printer properties
(driver) online Help for information about availability of features for that driver.
6
After side one has printed, remove the remaining paper from the input tray and set it aside
until after you finish your manual duplexing job.
7
Gather the printed pages, turn the printed side down, and straighten the stack before placing it
back in the input tray. Side one should be facing down with the bottom edge feeding into the
printer first.
Click OK (on screen), and wait for side two to print.
ENWW
Printing on both sides of the paper (manual duplexing) 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing booklets
You can print booklets on letter, legal, executive, or A4 paper.
1
Load the paper, and make sure that the straight-through output door is closed.
2
Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer
3
4
On the Device Settings tab, select the option to allow manual duplexing.
On the Finishing tab (the Paper Type/Quality tab for some Mac drivers), select the option to
Print on Both Sides. Ensure that Straight Paper Path is not checked.
5
Set the number of pages per sheet to two. Select the appropriate binding option, and click OK.
Print the document.
Note
Not all printer features are available from all drivers or operating systems. See the printer properties
(driver) online Help for information about availability of features for that driver.
6
After side one has been printed, remove the remaining paper from the input tray, and set it
aside until your booklet job is complete.
42 Chapter 3
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Gather the printed pages, turn the printed side down, and straighten the stack of paper.
8
Place the pages from side one back in the input tray. Side one should be facing down with the
bottom edge feeding into the printer first.
Click OK (on screen), and wait for side two to print.
9
Fold and staple the pages.
ENWW
Printing booklets 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Canceling a print job
You can cancel a print job from a software application or a print queue.
To stop the printer immediately, remove the remaining paper from the printer. After the printer
stops, use one of the following options.
●
●
●
Printer control panel: To cancel the print job, press and release the Go button on the printer
control panel.
Software application: Typically, a dialog box appears briefly on your screen, allowing you to
cancel the print job.
Windows print queue: If a print job is waiting in a print queue (computer memory) or print
spooler, delete the job there. Go to the Printer screen in Windows 98, Me, 2000, and XP click
Start, Settings, and Printers. Double-click the HP LaserJet 1150 or the HP LaserJet 1300
icon to open the window, select your print job, and click Delete.
●
Desktop print queue (Mac OS): Open the printer queue by double-clicking on the printer’s
icon in the Finder. Then highlight the print job and click Trash.
If the status lights on the control panel continue to blink after you cancel a print job, the computer
is still sending the job to the printer. Either delete the job from the print queue or wait until the
computer finishes sending data. The printer will return to the Ready state.
44 Chapter 3
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding print quality settings
Print quality settings affect how light or dark the print is on the page and the style that the graphics
are printed. You can also use the print quality settings to optimize the print quality for a specific
You can change the settings in the printer properties to accommodate the types of jobs you are
printing. The following are the settings:
●
●
●
600 dpi: This is the default setting.
FastRes 1200: This setting provides better print quality, but jobs take longer to print.
ProRes 1200: This setting is available for the HP LaserJet 1300 series printer. It provides the
best print quality.
●
EconoMode (Saves Print Cartridges): Text is printed using less toner. This setting is useful
when you are printing drafts. You can turn on this option independently of other print quality
settings.
1
2
Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer
On the Paper/Quality tab or the Finishing tab (the Paper Type/Quality tab for some Mac
drivers), select the print quality setting you want to use.
Note
Note
Not all printer features are available from all drivers or operating systems. See the printer properties
(driver) online Help for information about availability of features for that driver.
To change the print quality settings for all future print jobs, access the properties through the Start
menu in the Windows system tray. To change the print quality settings only for the current software
application’s use, access the properties through the Print Setup menu in the application you are
ENWW
Understanding print quality settings 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using EconoMode (Saves toner)
An excellent way to extend the life of your print cartridge is by using EconoMode. EconoMode
uses substantially less toner than normal printing. The printed image is much lighter, but it is
adequate for printing drafts or proofs.
1
To enable EconoMode, access the printer properties (or printing preferences in
2
On the Paper/Quality tab or the Finishing tab (the Paper Type/Quality tab for some Mac
drivers), select the EconoMode checkbox.
Note
Note
Not all printer features are available from all drivers or operating systems. See the printer properties
(driver) online Help for information about availability of features for that driver.
46 Chapter 3
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Using HP print cartridges
HP policy on non-HP print cartridges
Hewlett-Packard Company cannot recommend the use of non-HP print cartridges, either new,
refilled, or remanufactured. Since they are not HP products, Hewlett-Packard cannot influence
their design or control their quality. Service or repair that is required as a result of using non-HP
print cartridges will not be covered under the printer warranty.
Note
The warranty does not apply to defects resulting from software, interfacing, or parts not supplied by
Hewlett-Packard.
48 Chapter 4
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing print cartridges
Do not remove the print cartridge from its package until you are ready to use it. The shelf life of a
print cartridge in an unopened package is approximately 2.5 years. The shelf life of a print
cartridge in an opened package is approximately 6 months.
CAUTION
To prevent damage to the print cartridge, minimize its exposure to direct light.
ENWW
Storing print cartridges 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Print cartridge life expectancy
The life of the print cartridge depends on the amount of toner that your print jobs require. When
printing text at 5 percent coverage, the print cartridge lasts for the following average amounts:
●
●
HP LaserJet 1150 printer: 2,500 pages
HP LaserJet 1300 series printer: 2,500 pages (a replacement cartridge that lasts for
4,000 pages is also available)
This life expectancy assumes that you set the print density to 3 and turn EconoMode off. (These
are the default settings.)
50 Chapter 4
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Redistributing toner
When toner is low, faded or light areas appear on the printed page. You might be able to
temporarily improve print quality by redistributing the toner, which means that you might be able to
finish the current print job before replacing the print cartridge.
Note
You will feel some resistance when you open the print cartridge door. Opening the print cartridge
door conveniently lifts the print cartridge for removal.
1
Open the print cartridge door, and remove the print cartridge from the printer.
CAUTION
To prevent damage, do not expose the print cartridge to light. Cover it with a sheet of paper.
To redistribute the toner, gently shake the print cartridge from side to side.
2
CAUTION
If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot
water sets toner into the fabric.
3
Reinsert the print cartridge into the printer, and close the print cartridge door.
instructions.
52 Chapter 4
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the print cartridge
Note
You will feel some resistance when you open the print cartridge door. Opening the print cartridge
door conveniently lifts the print cartridge for removal.
1
Open the print cartridge door, and remove the old print cartridge. See the recycling
information inside the print cartridge box.
CAUTION
To prevent damage, do not expose the print cartridge to light. Cover it with a piece of paper.
2
Remove the new print cartridge from the packaging, and gently shake it from side to side to
distribute the toner evenly inside the cartridge.
3
Bend the tab on the right side of the cartridge to break it loose.
ENWW
Changing the print cartridge 53
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Pull the tab until all the tape is removed from the cartridge. Put the tab in the print cartridge
box to return for recycling.
5
Insert the print cartridge in the printer, making sure that the print cartridge is in position. Close
the print cartridge door.
CAUTION
If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot
water sets toner into the fabric.
54 Chapter 4
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the printer
Clean the outside of the printer with a clean, damp cloth when necessary.
CAUTION
Do not use ammonia-based cleaners on or around the printer.
During the printing process, paper, toner, and dust particles can accumulate inside the printer.
Over time, this buildup can cause print quality problems, such as toner specks or smearing. To
correct and prevent these types of problems, you can clean the print cartridge area and the printer
media path.
Cleaning the print cartridge area
You do not need to clean the print cartridge area often. However, cleaning this area can improve
the quality of your printed sheets.
WARNING!
Before cleaning the printer, turn the printer off by unplugging the power cord, and wait for the printer
to cool.
1
Open the print cartridge door, and remove the print cartridge.
CAUTION
To prevent damage, do not expose the print cartridge to light. Cover the print cartridge if necessary.
Also, do not touch the black sponge transfer roller inside the printer. By doing so, you can damage
the printer.
2
With a dry, lint-free cloth, wipe any residue from the media path area and the print cartridge
cavity.
ENWW
Cleaning the printer 55
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Replace the print cartridge, and close the print cartridge door.
4
Plug the power cord back into the printer.
Cleaning the printer media path
If you are experiencing toner specks or dots on the printouts, clean the printer media path. This
process uses a transparency to remove dust and toner from the media path. Do not use bond or
rough paper.
Note
For best results use a sheet of transparency. If you do not have any transparencies, you can use
copier grade media (18 to 24 lb. or 70 to 90 g/m ) with a smooth surface.
2
1
2
3
Make sure that the printer is idle and the Ready light is on.
Load the media in the input tray.
Print a cleaning page using one of the following methods:
Troubleshooting tab, and click Print Quality Tools. Select the cleaning page.
Or
• On the printer control panel, press and hold the Go button until all three lights come on
(about 10 seconds). When all three lights come on, release the Go button.
Note
The cleaning process takes approximately 2 minutes. The cleaning page will stop periodically during
the cleaning process. Do not turn the printer off until the cleaning process has finished. You might
need to repeat the cleaning process several times to thoroughly clean the printer.
56 Chapter 4
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer information pages
Special pages reside within the memory of the printer. These pages help you to diagnose and
solve problems with the printer.
Demo page
To print the Demo page, press GO when the printer is ready (Ready light on) and not printing.
Configuration page
The Configuration page lists current settings and properties of the printer. It also contains a status
log report. You can print a Configuration report from the printer, the embedded web server, or the
HP Toolbox.
To print the Configuration page from the printer, press Go for 5 seconds when the printer is in the
ready state. When the Go light turns on, release the Go button.
Note
You can also get the information contained in the Event log and the Configuration page through the
58 Chapter 5
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the hp toolbox
The HP toolbox is a Web application that you can use for the following tasks:
●
●
●
●
Check the printer status.
Configure the printer settings.
View troubleshooting information.
View online documentation.
You can view the HP toolbox when the printer is directly connected to your computer or when it is
connected to a network. You must have performed a complete software installation to use the
HP toolbox.
Note
You do not have to have Internet access to open and use the HP toolbox. However, if you click a link
in the Other Links area, you must have Internet access in order to go to the site associated with
Supported operating systems
HP toolbox is supported for the following operating systems:
●
●
Windows 98, 2000, Me, and XP
Mac OS X v10.1 and v10.2
Supported browsers
To use the HP toolbox, you must have one of the following browsers:
●
●
Microsoft Internet Explorer 5 or later
Netscape Navigator 6 or later.
All pages can be printed from the browser.
To view hp toolbox
1
On the Start menu, point to Programs, point to HP LaserJet 1150 or HP LaserJet 1300, and
choose the HP toolbox.
2
The HP toolbox opens in a Web browser.
Note
Once you open the URL, you can bookmark it so that you can return to it quickly in the future.
ENWW
Using the hp toolbox 59
Download from Www.Somanuals.com. All Manuals Search And Download.
hp toolbox sections
The HP toolbox software contains these sections:
●
●
●
●
●
●
card is installed)
Other links
Each page in the HP toolbox contains links to the HP website for product registration, product
support, and for ordering supplies. You must have Internet access in order to use any of these
links. If you use a dial-up connection and did not connect when you first opened the HP toolbox,
you must connect before you can visit these websites.
60 Chapter 5
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Status tab
The Status tab has links to these main pages:
●
Device Status. View printer status information. This page will indicate printer conditions such
as a paper jam or an empty tray. After you correct a problem with the printer, click the Refresh
button to update the device status.
●
Supplies Status. This page is available for the HP LaserJet 1300 series printer only. View
detailed supplies status such as the percent of toner remaining in the print cartridge and the
number of pages printed with the current print cartridge. This page also has links to order
supplies and to find recycling information.
●
Print Info pages. Print the configuration page and various other information pages that are
available for the printer.
Troubleshooting tab
The Troubleshooting tab provides links to various printer troubleshooting information. For example,
these pages provide information on how to clear a jam, how to resolve print quality problems, how
to interpret the control panel lights, and how to resolve other problems with the printer.
ENWW
Using the hp toolbox 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Alerts tab
The Alerts tab allows you to configure the printer to automatically notify you of printer alerts. The
Alerts tab has links to these main pages:
●
●
●
Set up status alerts
Set up e-mail alerts
Administrative settings
Set up status alerts
On the Set up status alerts page you can choose to turn alerts on or off, specify when the printer
should send an alert, and choose from two different types of alerts:
●
●
a pop-up message
a task bar icon
Click Apply to activate the settings.
Set up e-mail alerts
This page allows you to designate up to two e-mail addresses to notify of printer status alerts.
Follow the instructions on the screen to set up e-mail alerts.
Administrative settings
This page allows you to set the frequency of how often the HP toolbox checks for printer alerts.
Three settings are available:
●
●
●
once per minute (every 60 seconds)
twice per minute (every 30 seconds)
twenty times per minute (every 3 seconds)
If you want to reduce network I/O traffic, reduce the frequency that the printer checks for alerts.
Documentation tab
The Documentation tab contains links to these information sources:
●
User Guide. Contains the information about the printer usage, warranty, specifications, and
support that you are currently reading. The user guide is available in both .html and .pdf
format.
●
●
Read Me. Contains information discovered after other documentation such as the user guide
was developed.
Late Breaking News. Contains late-breaking information about the printer. In English only.
62 Chapter 5
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Printer Settings window
When you click the Advanced Printer Settings link, a new window opens. The Advanced Printer
Settings window has two tabs:
●
●
Information tab
Settings tab
Information tab
The Information tab provides quick links to the following information:
●
●
●
●
●
Device status
Configuration
Supplies status (HP LaserJet 1300 series printer only)
Event log
Print Info pages
Settings tab
The Settings tab has links to several pages that allow you to view and change the printer’s
configuration.
Note
Software settings can override settings made in the HP toolbox.
●
●
●
●
●
Device Information. View basic information about the printer.
Paper Handling. View and change the settings for the printer’s input tray.
Printing. View and change the default printer job settings.
PCL. View and change the PCL font information.
PostScript. This page is available for the HP LaserJet 1300 series printer only. View and
change the settings for PS errors and timeout.
●
●
●
●
●
Print Quality. View and change the print quality settings.
Print Modes. View and change the print modes for various media types.
System Setup. View and change system information.
I/O. View and change the I/O timeout setting.
Resets. Change all the printer settings back to the factory default settings.
Network window
Note
This option is only available for the HP LaserJet 1300 series printer and only when an LIO card is
installed.
When you click the Network link on the Advanced Printer Settings page, a new window opens.
Use this section to configure network settings.
ENWW
Using the hp toolbox 63
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the embedded Web server
The embedded Web server is available for HP LaserJet 1300 series printers with LIO network
connections. The embedded Web server provides the same functions as the Advanced Printer
Settings section of the HP toolbox. The main differences between using the embedded Web
server and using the HP toolbox are the following:
●
You do not need to install any software on the computer. You only need to have a supported
Web browser. To use the embedded Web server, you must have Microsoft Internet Explorer
5.0 or later or Netscape Navigator 4.75 or later.
●
●
●
The embedded Web server is available in English only.
The embedded Web server does not provide e-mail or status alerts.
The embedded Web server is supported by more operating systems than the HP toolbox,
®
including Windows 95, Windows NT, Linux, and UNIX .
The embedded Web server allows you to view printer and network status and to manage printing
functions from your computer instead of from the printer control panel. Below are examples of
what you can do using the embedded Web server:
●
●
●
●
●
●
●
view printer status information
view and print internal pages
determine the remaining life on all supplies and order new ones
set the type of paper loaded in each tray
view and change tray configurations
view and change the printer default configuration settings
view and change network configuration
The embedded Web server works when the printer is connected to an IP-based network. The
embedded Web server does not support IPX- or AppleTalk-based printer connections.
Note
You do not have to have Internet access to open and use the embedded Web server. However, if
you click a link in the Other Links area, you must have Internet access in order to go to the site
associated with the link.
To open the embedded Web server
1
In a supported Web browser, type the IP address or hostname for the printer. To find the IP
address, print a Configuration page at the printer by pressing and holding Go for 5 seconds.
Note
Once you open the URL, you can bookmark it so that you can return to it quickly in the future.
2
The embedded Web server has three tabs that contain settings and information about the
printer: the Information tab, the Settings tab, and the Networking tab. Click the tab that you
want to view.
64 Chapter 5
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Information tab
The Information pages group consists of the following pages.
●
Device Status. This page displays the printer status and shows the life remaining of HP
supplies. This page also displays product information such as the network name, network
address, and model information.
●
●
Configuration. This page shows the information found on the printer Configuration page.
Supplies Status. This page shows the life remaining of HP supplies and provides supplies
part numbers. To order new supplies, click Order Supplies in the Other Links area on the left
side of the window. To visit any web site, you must have Internet access.
●
●
Event log. This page shows a list of all printer events and errors.
Print Info Pages. This page has links that allow you to print the various information pages that
reside within the memory of the printer.
Settings tab
This tab allows you to configure the printer from your computer. If this printer is networked, always
consult with the printer administrator before changing settings on this tab.
The Settings tab contains the following pages.
●
●
●
●
●
●
●
●
●
●
Device Information. View and change basic information about the printer.
Paper Handling. View and change the settings for the printer’s input tray.
Printing. View and change the default printer job settings.
PCL. View and change the PCL font information.
PostScript. View and change the settings for PS errors and timeout.
Print Quality. View and change the print quality settings.
Print Modes. View and change the print modes for various media types.
System Setup. View and change system information.
I/O. View and change the I/O timeout setting.
Service. Complete service tasks in the printer, such as changing all the printer settings back
to the factory default settings.
ENWW
Using the embedded Web server 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking tab
This tab allows the network administrator to control network-related settings for the printer when it
is connected to an IP-based network.
Other links
This section contains links that connect you to the Internet. You must have Internet access in order
to use any of these links. If you use a dial-up connection and did not connect when you first
opened the embedded Web server, you must connect before you can visit these web sites.
Connecting might require that you close the embedded Web server and reopen it.
●
●
Product Registration. Connects you to the product registration page on the HP web site.
Order Supplies. Click this link to connect to the HP web site and order genuine HP supplies,
such as print cartridges and paper.
●
Product Support. Connects to the support site for the HP LaserJet 1300 series printer. You
can search for help regarding general topics.
66 Chapter 5
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless printing
Wireless networks offer a safe, secure, and cost-effective alternative to traditional wired network
IEEE 802.11b standard
With the wireless HP Jetdirect 802.11b print server, HP peripherals can be placed anywhere in the
office or home and connected to a wireless network running Microsoft, Apple, Netware, UNIX, or
Linux network operating systems. This wireless technology provides a high-quality printing
solution without the physical constraints of wiring. Peripherals can be conveniently placed
anywhere in an office or home and can be easily moved without changing network cables.
Installation is easy with the HP Install Network Printer Wizard.
HP Jetdirect 802.11b print servers are available for USB and parallel connections.
Bluetooth
Bluetooth™ wireless technology is a low-power, short-range radio technology that can be used to
wirelessly connect computers, printers, personal digital assistants, cell phones, and other devices.
Unlike infra-red technology, Bluetooth's reliance on radio signals means that devices do not have
to be in the same room, office, or cubicle with an unobstructed line of sight in order to
communicate. This wireless technology increases portability and efficiency within business
network applications.
The HP LaserJet 1150 and 1300 series printers have incorporated Bluetooth wireless technology.
Bluetooth adaptors are available for USB and parallel connections.
ENWW
Wireless printing 67
Download from Www.Somanuals.com. All Manuals Search And Download.
68 Chapter 5
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding the solution
You can use this section to find the solution to common printer problems.
Step 1: Is the printer set up correctly?
●
Is the printer plugged into a power outlet that is known to work?
●
Is the on/off switch in the on position?
●
●
Is paper properly loaded in the input tray? See
Step 2: Is the Ready light on?
Do the control panel lights look like this picture?
Step 3: Can you print a demo page?
Press the Go button to print a demo page.
70 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Is the print quality acceptable?
Verify that the print settings are correct for the media you are using.
See the Media chapter for information on adjusting the settings for various types of media.
Step 5: Is the printer communicating with the computer?
Try printing a document from a software application.
Step 6: Does the printed page look like you expected?
Contact HP support
●
●
In other locations, see http://www.hp.com
ENWW
Finding the solution 71
Download from Www.Somanuals.com. All Manuals Search And Download.
Status light patterns
Light status legend
Symbol for “light off”
Symbol for “light on”
Symbol for “light blinking”
Control panel light message
Light status Condition of the printer
Action
Ready
No action is necessary. To print a configuration page,
press and release the Go button on the printer control
panel.
The printer is ready to print.
Processing
Wait for the job to print.
The printer is receiving or
processing data.
Manual feed or out of memory Make sure that you have loaded the correct media. To
The printer is in manual feed
mode or out of memory. You
can continue printing.
continue printing, press and release the Go button.
The software controls manual feed. If you do not want to
be in manual feed mode, change the setting from your
information.
The page being printed might be too complex for the
printer’s memory capacity.
●
●
●
To continue printing, press and release the Go
button.
Lower the resolution. See Understanding print quality
Door open, media out, no print Check the following:
cartridge, or media jam
●
The print cartridge door is completely closed.
●
Media is loaded. See Loading media into the input
The printer is in an error state
that requires operator
intervention or help.
●
●
●
The print cartridge is correctly installed in the printer.
instructions.
The left side panel is completely closed.
72 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel light message (continued)
Light status Condition of the printer
Action
Printer initialization/Cancel
Job/Cleaning Mode
No action is necessary.
A printer initialization is taking
place. If all lights blink for 1/2 of
a second or longer in a
sequence:
●
the printing is initializing
●
all previously sent print jobs
are being purged
●
a cleaning page is being
printed
Fatal error
All lights are on.
●
●
Turn the printer off and then back on.
Unplug the printer for 5 minutes, and then plug it back
in.
●
●
●
Accessory error
All lights are blinking.
Remove the DIMMs and replace if necessary. See
instructions.
ENWW
Status light patterns 73
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Macintosh problems
Choose the item that best describes the problem:
●
●
●
●
Symptom
Possible Cause
Solution
Problems in the Chooser
LaserWriter icon does not Software not installed
The LaserWriter 8 driver should be present as a
part of the Mac OS. Make sure that the
LaserWriter driver is in the Extensions folder
within the systems folder. If not, install the
LaserWriter driver from your Mac OS CD.
appear in the Chooser.
correctly.
(HP LaserJet 1300 series)
The HP LaserJet printer
The software was not
Reinstall the software.
driver icon does not appear installed properly.
in the Chooser.
(HP LaserJet 1150 printer)
Printer name does not
appear in the printer list.
Make sure the cables are connected correctly, the
printer is on, and the Ready light is on.
Verify that the printer driver is installed.
Make sure the correct printer driver has been
selected in the Chooser.
Use the HP LaserJet driver for the HP LaserJet
1150 printer.
Use the LaserWriter 8 driver for the HP LaserJet
1300 series printer.
Make sure AppleTalk is on. (The button next to
Active is selected in the Chooser.)
If the printer resides on a network with multiple
zones, make sure the correct zone is selected in
the “AppleTalk Zones” box in the Chooser.
The printer driver does not
automatically set up your
selected printer even
though you clicked Auto
Setup in the Chooser.
Reinstall the printer software.
Select an alternate PPD.
(HP LaserJet 1300 series)
74 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible Cause
Solution
Printing Errors
A print job was not sent to Another printer with the
Check the AppleTalk name of the printer displayed
your desired printer.
same or similar name may on the configuration page.
have received your print
job.
You cannot use the
Background Printing has LaserWriter 8.3
computer while the printer not been selected.
is printing.
Turn Background Printing on in the Chooser.
Status messages will now be redirected to the
Print Monitor allowing you to continue working
while the computer is processing data to be sent
to the printer.
LaserWriter 8.4 and higher
Turn Background Printing on by selecting File,
Print Desktop, and Background Printing.
An encapsulated
This problem occurs with Try downloading the fonts contained in the EPS
PostScript (EPS) file does some software
file to the printer before printing.
not print with the correct
fonts.
applications.
Send the file in ASCII format instead of binary
encoding.
Your document is not
printing with New York,
Geneva, or Monaco fonts.
Select Options in the Page Setup dialog box to
deselect substituted fonts.
ENWW
Common Macintosh problems 75
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible Cause
Solution
USB Problems
Unable to print from a
third-party USB card.
This error occurs when the When adding a third-party USB card, you might
software for USB printers need Apple's USB Adapter Card Support
is not installed.
software. The most current version of this
software is available from Apple’s web site.
A USB-connected
This problem is caused by Software troubleshooting
HP LaserJet printer does
either a software or
●
Check that your Macintosh supports USB.
not appear in the Chooser. hardware component.
●
Verify if your Macintosh has Mac OS 8.6 or
later.
Hardware troubleshooting
●
Check that the printer is turned on.
●
Verify that the USB cable is properly
connected.
●
●
Check that you are using the appropriate
high-speed USB cable.
Ensure that there are not too many USB
devices drawing power from the chain.
Disconnect all devices from the chain and
connect the cable directly to the USB port on
the host computer.
●
Check to see if there are more than two
non-powered USB hubs in a row on the chain.
Disconnect all devices from the chain and
connect the cable directly to the USB port on
the host computer.
Note
The iMac keyboard is a non-powered USB hub.
The LaserWriter driver
does not display USB
devices in the Chooser.
For the HP LaserJet 1300 series printer, use the
Apple Desktop utility to set up the printer.
76 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible Cause
Solution
OS X problems
Printer features do not
appear.
The wrong PPD is
selected for the printer.
Verify which PPD is selected as follows:
In the Print dialog box, click Summary. Verify that
the “PPD for:” setting is correct.
If the PPD setting is incorrect, delete the printer in
the Print Center and add it again. You might need
to manually select the PPD.
When using OS X v10.2,
the printer is not using
“Rendezvous” (mDNS)
You might need to upgrade your HP Jetdirect card
to a version that supports Rendezvous.
Tray 2 does not appear as
an installed option, even
though it is installed on the
printer.
The ability to manually select installable options is
supported only in Mac OS X v10.2 and later.
(HP LaserJet 1300 series
only)
ENWW
Common Macintosh problems 77
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting an Alternate PostScript Printer Description (PPD) for
the hp LaserJet 1300 series printer
Mac OS 9.x
1
2
3
Open the Chooser from the Apple menu.
Click the LaserWriter icon.
If you are on a network with multiple zones, select the zone in the AppleTalk Zones box where
the printer is located.
4
Click the printer name you want to use in the Select a PostScript Printer box. (Double-clicking
will immediately generate the next few steps.)
5
6
7
Click Setup... (This button may read Create for first-time setup.)
Click Select PPD....
Find the desired PPD in the list and click Select. If the desired PPD is not listed, choose one
of the following options:
• Select a PPD for a printer with similar features.
• Select a PPD from another folder.
• Select the generic PPD by clicking Use Generic. The generic PPD allows you to print, but
limits your access to printer features.
8
In the Setup dialog box, click Select, and then click OK to return to the Chooser.
Note
If you manually select a PPD, an icon might not appear next to the selected printer in the Select a
PostScript Printer box. In the Chooser, click Setup, click Printer Info, and then click Update Info to
bring up the icon.
9
Close the Chooser.
Mac OS X
1
2
Delete the printer from the Print Center.
Add the printer again using the option to manually select the PPD.
Renaming the Printer (hp LaserJet 1300 series only)
If you are going to rename the printer, do this before selecting the printer in the Chooser. If you
rename the printer after selecting it in the Chooser, you will have to go back into the Chooser and
reselect it.
Use the Set Printer Name feature in the HP LaserJet Utility to rename the printer.
78 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting PostScript (PS) errors
The following situations are PS language specific and may occur when several printer languages
are being used.
Note
To receive a printed or screen displayed message when PS errors occur, open the Print Options
dialog box and click the desired selection next to the PS Errors section. You can also access this
from the embedded Web server.
PS Errors
Symptom
Possible Cause
Solution
The job prints in Courier (the The requested typeface is not Download the desired font and send the
printer’s default typeface)
instead of the typeface you
requested.
downloaded. A personality
switch may have been
performed to print a PCL job applicable. Check with the software
just before the PS printing job documentation.
was received.
print job again. Verify the type and location
of the font. Download to printer if
A legal page prints with
clipped margins.
Print job too complex.
You may need to print your job at 600 dots
per inch, reduce the complexity of the
page, or install more memory.
A PS error page prints.
Limit Check Error
Print job may not be PS.
Make sure the print job is a PS job. Check
to see whether the software application
expected a setup or PS header file to be
sent to the printer.
Print job is too complex.
You may need to print your job at 600 dots
per inch, reduce the complexity of the
page, or install more memory.
VM Error
Font Error
Font Error
Select unlimited downloadable fonts from
printer driver.
Range Check
Select unlimited downloadable fonts from
printer driver.
ENWW
Troubleshooting PostScript (PS) errors 79
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper handling problems
Choose the item that best describes the problem:
●
●
●
●
●
●
●
Media handling problems
Problem
Solution
Paper jam
●
●
Make sure that you are printing with media that meets specifications.
●
●
●
Make sure that you are printing with media that is not wrinkled, folded,
or damaged.
information.
If you are printing to the straight-through output path, close and open
the door again to make sure that the green release levers are closed.
Print is skewed (crooked)
●
●
Adjust the media guides to the width and length of the media that you
More than one sheet of media
feeds through the printer at
one time
●
The media input tray might be too full. See Loading media into the input
●
●
Make sure that the media is not wrinkled, folded, or damaged.
The printer separation pad might be worn. See Changing the printer
Printer does not pull media
from the media input tray
●
●
Printer curled the media
●
●
Open the straight-through output door to print straight through.
The printed media does not exit Open or close the straight-through output door to reflect the output path that
80 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Media handling problems (continued)
Problem
Solution
Print job is extremely slow
The maximum speed of the printer is up to 18 pages per minute for the
HP LaserJet 1150 printer and up to 20 pages per minute for the
HP LaserJet 1300 series printer. Your print job might be very complex. Try
the following:
●
Reduce the complexity of your document (for example, reduce the
number of multiple graphics).
●
In the printer driver, set the media type to plain paper.
• This may cause toner to fuse improperly if using heavy
media.
●
●
Narrow media or heavy media will slow printing. Use normal media.
ENWW
Paper handling problems 81
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed page is different than what appeared on screen
Choose the item that best describes the problem:
●
●
●
●
Printed page problems
Problem
Solution
Garbled, incorrect, or
incomplete text
The parallel or USB cable might be loose or defective. Try the
following:
●
●
●
Disconnect the cable and reconnect it at both ends.
Try printing a job that you know works.
If possible, attach the cable and printer to another
computer, and try printing a job that you know works.
●
Try using a new IEEE-1284 compliant parallel or USB
The wrong printer driver might have been selected when the
software was installed. Make sure that the HP LaserJet 1150
or HP LaserJet 1300 is selected in the printer properties.
There might be a problem with your software application. Try
printing from another software application.
Missing graphics or text, or
blank pages
●
●
Make sure that your file does not contain blank pages.
The sealing tape might still be in the print cartridge.
Remove the print cartridge, and pull out the sealing tape.
Reinstall the print cartridge. See Changing the print
demo page by pressing the Go button.
●
●
The graphic settings in the printer properties might not be
correct for the type of job that you are printing. Try a
different graphic setting in the printer properties. See
The printer driver might not work for the type of job that
you are printing. Try using a different printer driver
(software), such as the printer driver for the
HP LaserJet III.
Note
If you use a different printer driver, you will lose access to
some product features.
82 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed page problems (continued)
Problem Solution
Page format is different than on If you used an older or different printer driver (printer software)
another printer
to create the document or the printer properties settings in the
software are different, the page format might change when
you try to print using your new printer driver or settings. To
help eliminate this problem, try the following:
●
Create documents and print them using the same printer
driver (printer software) and printer property settings
regardless of which HP LaserJet printer you use to print
them.
●
Change the resolution, paper size, font settings, and other
information.
Graphics quality
The graphics settings might be unsuitable for your print job.
Try the following:
●
Check the graphic settings, such as resolution, in the
printer properties and adjust them as necessary. See
●
Try using a different printer driver (software), such as the
printer driver for the HP LaserJet III.
Note
If you use a different printer driver, you will lose access to
some product features.
ENWW
Printed page is different than what appeared on screen 83
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer software problems
Printer software problems
Problem
Solution
A printer driver for the
●
Reinstall the printer software. In the Windows system tray, click Start,
HP LaserJet 1150 or the
HP LaserJet 1300 printer is not
visible in the Printer folder
select Programs, and select HP LaserJet 1150 or HP LaserJet 1300
and click Uninstall. Turn the printer off. Install the printer software
from the CD-ROM. Turn the printer back on.
Note
Close any applications that are running. To close an application that
has an icon in the system tray, right-click the icon and select Close or
Disable.
●
●
Try plugging the USB cable into a different USB port on the PC.
If you are trying to print to a shared printer, in the Windows system
tray, click Start, select Settings, and select Printers. Double-click the
Add Printer icon. Follow the instructions in the Add Printer Wizard.
An error message was
displayed during the software
installation
●
Reinstall the printer software. In the Windows system tray, click Start,
select Programs, and select HP LaserJet 1150 or HP LaserJet 1300
and click Uninstall. Turn the printer off. Install the printer software
from the CD-ROM. Turn the printer back on.
Note
Close any applications that are running. To close an application that
has an icon in the system tray, right-click the icon and select Close or
Disable.
●
●
Check the amount of free space on the drive where you are installing
the printer software. If necessary, free up as much space as you can,
and reinstall the printer software.
If necessary, run the Disk Defragmenter, and reinstall the printer
software.
The printer is in Ready mode,
but nothing prints
●
Reinstall the printer software. In the Windows system tray, click Start,
select Programs, and select HP LaserJet 1150 or HP LaserJet 1300
and click Uninstall. Turn the printer off. Install the printer software
from the CD-ROM. Turn the printer back on.
Note
Close any applications that are running. To close an application that
has an icon in the system tray, right-click the icon and select Close or
Disable.
●
Print a Demo page. Press the Go button to print a Demo page.
84 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Improving print quality
This section provides information about identifying and correcting print defects.
Light print or faded
●
●
information.
The media might not meet Hewlett-Packard’s media
specifications (for example, the media is too moist or too rough).
●
If the whole page is light, the print density adjustment is too light
or EconoMode might be turned on. Adjust the print density and
disable EconoMode in the printer properties. See Saving toner
for more information.
Toner specks
●
●
The media might not meet Hewlett-Packard’s media
specifications (for example, the media is too moist or too rough).
Dropouts
●
●
A single sheet of media might be defective. Try reprinting the job.
The media’s moisture content is uneven or the media has moist
●
●
The media lot is bad. The manufacturing processes can cause
some areas to reject toner. Try a different type or brand of media.
The print cartridge might be defective. See Changing the print
Note
If these steps do not correct the problem, contact an HP-authorized dealer or service representative.
Vertical lines
●
●
Make sure that the priority input tray is in place.
The photosensitive drum inside the print cartridge has probably
been scratched. Install a new HP print cartridge. See Changing
ENWW
Improving print quality 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Gray background
●
●
Make sure that the priority input tray is in place.
Decrease the print density setting through HP Toolbox or the
embedded web server. This decreases the amount of
●
●
●
Change the media to a lighter basis weight. See Printer media
Check the printer’s environment. Very dry (low humidity)
conditions can increase the amount of background shading.
for instructions.
Toner smear
●
If toner smears appear on the leading edge of the media, the
media guides might be dirty. Wipe the media guides with a dry,
●
●
Check the media type and quality.
●
The fuser temperature might be too low. In your printer driver,
make sure the appropriate media type is selected.
Loose toner
●
●
●
●
●
instructions.
In your printer driver, make sure the appropriate media type is
selected.
Plug the printer directly into an AC outlet instead of into a power
strip.
Vertical repetitive defects
●
The print cartridge might be damaged. If a repetitive mark
occurs at the same spot on the page, install a new HP print
●
●
the page, the problem will probably correct itself after a few
more printed pages.
In your printer driver, make sure the appropriate media type is
selected.
86 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Misformed characters
●
●
If characters are improperly formed, producing hollow images,
the media stock might be too slick. Try a different media. See
If characters are improperly formed, producing a wavy effect, the
printer might need service. Print a configuration page. If the
characters are improperly formed, contact an HP-authorized
more information.
Page skew
●
Make sure that the media is loaded correctly and the media
guides are not too tight or too loose against the media stack.
●
●
Curl or wave
●
●
Check the media type and quality. Both high temperature and
humidity cause media to curl. See Printer media specifications
for more information.
The media might have been in the input tray too long. Turn over
the stack of media in the tray. Also, try rotating the media 180° in
the input tray.
●
●
Open the straight-through output door and try printing straight
The fuser temperature might be too high. In your printer driver,
make sure the appropriate media type is selected. If the problem
persists, select a media type that uses a lower fuser
temperature, such as transparencies or light media.
Wrinkles or creases
●
●
●
●
Open the straight-through output door and try printing straight
Turn over the stack of media in the tray. Also, try rotating the
media 180° in the input tray.
ENWW
Improving print quality 87
Download from Www.Somanuals.com. All Manuals Search And Download.
Toner scatter outline
●
If large amounts of toner have scattered around the characters,
the media might be resisting the toner. (A small amount of toner
scatter is normal for laser printing.) Try a different media type.
●
●
Turn over the stack of media in the tray.
Use media designed for laser printers. See Printer media
88 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing jams
Occasionally, media becomes jammed during a print job. Some of the causes include the
following:
●
more information.
●
information.
Note
When you add new media, always remove all of the media from the input tray and straighten the
stack of new media. This helps prevent multiple sheets of media from feeding through the printer at
one time, reducing media jams.
You are notified of a media jam by an error in the software and the printer control panel lights. See
Typical media jam locations
●
●
Input tray areas: If the page is still sticking out of the input tray, gently try to remove it from the
instructions.
●
Output paths: If the page is sticking out of the output bin, gently try to remove it without
Note
There might be loose toner in the printer after a media jam. This toner clears up after a few sheets
print.
ENWW
Clearing jams 89
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing a jammed page
CAUTION
Media jams might result in loose toner on the page. If you get any toner on your clothes, wash them
in cold water. Hot water will permanently set the toner into the fabric.
1
Open the print cartridge door and the straight-through output door.
2
Rotate the green pressure release levers downward. If you can remove the media without
removing the print cartridge, do so, and continue with step 4.
CAUTION
To prevent damage to the print cartridge, minimize its exposure to direct light.
3
Remove the print cartridge, and place it aside.
90 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
6
With both hands, grasp the side of the media that is most visible (this includes the middle),
and carefully pull it free from the printer.
If no media is visible, grasp the tab on the right-hand side of the upper media guide and pull it
forward. Carefully pull the media up and out of the printer.
When you have removed the jammed media, replace the print cartridge, and close the print
cartridge door and the straight-through output door.
Note
Note
The pressure release levers automatically close when you close the straight-through output door.
After clearing a media jam, you might need to turn the printer off and turn it back on.
When you add new media, remove all of the media from the input tray and straighten the stack of
new media.
ENWW
Clearing jams 91
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the pickup roller
If the printer regularly mispicks (no media feeds through or more than one sheet feeds through),
order a new pickup roller.
CAUTION
Failure to complete this procedure might damage the printer.
1
Unplug the power cord from the printer, and allow the printer to cool.
2
Open the print cartridge door, and remove the print cartridge.
3
Find the pickup roller.
92 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Release the small, white tabs on either side of the pickup roller, and rotate the pickup roller
toward the front.
5
Gently pull the pickup roller up and out.
6
Position the new or cleaned part in the slot of the previous pickup roller. See Cleaning the
Note
Circular and rectangular pegs on each side prevent you from incorrectly positioning the pickup roller.
ENWW
Changing the pickup roller 93
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Rotate the top of the new pickup roller away from you until both sides snap into place.
8
Reinstall the print cartridge, and close the print cartridge door.
9
Plug the printer in to turn it back on.
94 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the pickup roller
If you want to clean the pickup roller rather than replace it, follow the instructions below:
1
2
Dab a lint-free cloth in isopropyl alcohol, and scrub the roller.
WARNING!
Alcohol is flammable. Keep the alcohol and cloth away from an open flame. Before you close the
printer and plug in the power cord, allow the alcohol to dry completely.
3
Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.
4
Allow the pickup roller to dry completely before you reinstall it in the printer (see steps 6
In certain areas of California, air pollution control regulations restrict the use of
liquid Isopropyl Alcohol (IPA) as a cleaning agent. In those areas of California,
please disregard the previous recommendations and use a dry, lint-free cloth.
The cloth may be moistened with water if desired.
Note
ENWW
Cleaning the pickup roller 95
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the printer separation pad
Note
Before you change the separation pad, clean the pickup roller. Leave the pickup roller out of the
If your input tray feeds more than one page at a time, you might need to change the printer
separation pad. Recurring feed problems indicate that the printer separation pad is worn. See
1
Unplug the power cord from the printer, and allow the printer to cool.
2
Remove the input trays.
3
Find the blue separation pad.
96 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
4
To pry the separation pad up from the spring-loaded base, insert a flat-edged screwdriver in
the slot under the separation pad and twist until the tabs are free.
5
Reach in through the opening, push the spring-loaded base down with one hand, and pull the
separation pad up with the other hand.
6
With one hand, position the new separation pad in the slot of the previous separation pad (A).
With the other hand, reach through the input tray opening, and push the spring-loaded base
down (B).
Note
The tab on the right is larger to help you position it correctly.
ENWW
Changing the printer separation pad 97
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Snap both sides of the separation pad firmly into place.
CAUTION
Make sure that the separation pad is straight and that there is no space between the separation pad
and the spring-loaded base. If the separation pad is not straight or you see space on one side,
remove the separation pad, make sure that the larger tab is on the right, reinsert the separation pad,
and snap both sides into place.
8
Reinsert the pickup roller, print cartridge, and input trays. Plug the printer in to turn it back on.
98 Chapter 6
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Printer specifications
Environmental specifications
Operating environment
Printer plugged into an AC outlet:
●
Temperature: 10° C to 32.5° C (50° F to 90.5° F)
●
Humidity: 20 to 80 percent (no condensation)
Storage environment
Printer unplugged from an AC outlet:
●
Temperature: 0° C to 40° C (32° F to 104° F)
●
Humidity: 10 to 80 percent (no condensation)
Acoustic emissions1
Declared per ISO 9296
HP LaserJet 1150
Sound power level
Printing (18 ppm): L
= 6.3 Bels (A) [63 dB (A)]
WAd
PowerSave: essentially inaudible
Sound power level
bystander position
Printing (18 ppm): L
PowerSave: essentially inaudible
= 6.3 Bels (A) [63 dB (A)]
WAd
HP LaserJet 1300
Sound power level
Printing (20 ppm): L
= 6.3 Bels (A) [63 dB (A)]
WAd
PowerSave: essentially inaudible
Sound power level
bystander position
Printing (20 ppm): L
PowerSave: essentially inaudible
= 6.3 Bels (A) [63 dB (A)]
WAd
HP LaserJet 1300n
Sound power level
Printing (20 ppm): L
= 6.3 Bels (A) [63 dB (A)]
WAd
PowerSave: essentially inaudible
Sound power level
bystander position
Printing (20 ppm): L
PowerSave: essentially inaudible
= 6.3 Bels (A) [63 dB (A)]
WAd
100 Appendix A
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer specifications (continued)
Electrical specifications1
Warning! Power requirements are based on the country/region where the printer is sold. Do not convert
operating voltages. Doing so might damage the printer and void the product warranty.
HP LaserJet 1150
Power requirements
●
110-127v (+/-10%), 50/60 Hz (+/-2)
or
●
220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
●
During printing (18 ppm): 320 watts (average)
During standby and PowerSave*: 7 Watts
* Instant on fuser technology
●
Off: 0 watts
Minimum recommended circuit
capacity for typical product
●
●
4.5 amps at 115 volts
2.4 amps at 230 volts
HP LaserJet 1300
Power requirements
●
110-127v (+/-10%), 50/60 Hz (+/-2)
or
●
220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
●
During printing (20 ppm): 320 watts (average)
During standby and PowerSave*: 7 Watts
* Instant on fuser technology
●
Off: 0 watts
Minimum recommended circuit
capacity for typical product
●
●
4.5 amps at 115 volts
2.4 amps at 230 volts
HP LaserJet 1300n
Power requirements
●
110-127v (+/-10%), 50/60 Hz (+/-2)
or
●
220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
●
During printing (20 ppm): 320 watts (average)
During standby and PowerSave*: 7 Watts
* Instant on fuser technology
●
Off: 0 watts
Minimum recommended circuit
capacity for typical product
●
●
4.5 amps at 115 volts
2.4 amps at 230 volts
ENWW
Specifications 101
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer specifications (continued)
Physical specifications
Dimensions
●
●
●
Width: 415 mm (16.3 inches)
Depth: 486 mm (19.1 inches)
Height: 253 mm (10.0 inches)
Weight (cartridge installed)
8.5 kg (18.6 lb)
Printer capacities and ratings
Print speed
HP LaserJet 1150 printer:
●
17 ppm for A4, 18 ppm for letter
●
First page out in less than 10 seconds
HP LaserJet 1300 series printer:
●
19 ppm for A4, 20 ppm for letter
●
First page out in less than 8 seconds
2
Main input tray capacity
Priority input tray capacity
Output bin capacity
Minimum paper size
Maximum paper size
Media weight
250 sheets of regular weight 20 lb (75 g/m ) paper or up to 30 envelopes
2
10 sheets of regular weight 20 lb (75 g/m ) paper or 1 envelope
2
125 sheets of regular weight 20 lb (75 g/m ) paper
76 by 127 mm (3 by 5 inches)
216 by 356 mm (8.5 by 14 inches)
2
●
●
Output bin – 60 to 105 g/m (16 to 28 lbs)
2
Straight through media path – 60 to 163 g/m (16 to 43 lbs)
Base memory
8 MB of RAM (16 MB RAM on HP LaserJet 1300 series)
Upgrade memory expansion
HP LaserJet 1300 series printer only
One DIMM slot available for an 8, 16, 32, or 64 MB RAM DIMM
Print resolution
Duty cycle
1,200 dots per inch (dpi)
●
●
10,000 single-sided pages per month (maximum)
1,000 single-sided pages per month (average)
PCL
PS
Level 5e
PostScript 2 emulation
102 Appendix A
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer specifications (continued)
Memory specifications
DIMMs
100 pin, 66 MHz minimum speed
Port availability
USB
Compatible with the USB 2.0 specification
Parallel
●
●
IEEE 1284 level 2 device with an IEEE 1284-B receptacle
Set host computer to ECP
1 Values are subject to change. For current information see
ENWW
Specifications 103
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC compliance
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. If it is not installed and used in accordance with the instructions, it
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
●
●
●
●
Reorient or relocate the receiving antenna.
Increase separation between equipment and receiver.
Connect equipment to an outlet on a circuit different from that to which the receiver is located.
Consult your dealer or an experienced radio/TV technician.
Note
Any changes or modifications to the printer that are not expressly approved by Hewlett-Packard
could void the user’s authority to operate this equipment.
Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules.
104 Appendix A
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Environmental product stewardship program
Protecting the environment
Hewlett-Packard Company is committed to providing quality products in an environmentally sound
manner. This product has been designed with several attributes to minimize the impact on our
environment.
Ozone production
This product generates no appreciable ozone gas (O ).
3
Energy consumption
Energy usage drops significantly while in PowerSave mode, which saves money without affecting
the high performance of this product. This product qualifies for ENERGY STAR, which is a voluntary
program to encourage the development of energy-efficient office products.
ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR partner,
Hewlett-Packard Company has determined that this product meets ENERGY STAR guidelines for
Toner consumption
EconoMode uses significantly less toner, which might extend the life of the print cartridge.
Paper use
This product’s manual duplex (two-sided printing) and N-up printing (multiple pages printed on one
page) features can reduce paper usage and the resulting demands on natural resources.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the
ability to identify plastics for recycling purposes at the end of the product’s life.
HP LaserJet printing supplies
In many countries/regions, this product’s printing supplies (such as print cartridge, drum, and
fuser) can be returned to Hewlett-Packard through the HP printing supplies returns and recycling
program. This easy-to-use, free takeback program is available in over 48 countries/regions.
Multilingual program information and instructions are included in every new HP print cartridge and
consumables package.
HP printing supplies returns and recycling program information
Since 1990, the HP printing supplies returns and recycling program has collected millions of used
print cartridges that otherwise might have been discarded in the world’s landfills. The HP LaserJet
print cartridges and consumables are collected and bulk-shipped to our resource and recovery
partners who disassemble the print cartridge. After a thorough quality inspection, selected parts
are reclaimed for use in new print cartridges. Remaining materials are separated and converted
into raw materials for use by other industries to make a variety of useful products.
ENWW
Environmental product stewardship program 105
Download from Www.Somanuals.com. All Manuals Search And Download.
U.S. recycling returns
For a more environmentally responsible return of used print cartridges and consumables,
Hewlett-Packard encourages you to use bulk returns. Simply bundle two or more print cartridges
together and use the single, prepaid, pre-addressed label that is supplied in the package. For
more information in the U.S., call (800) 340-2445 or visit the HP LaserJet supplies Web site at
Non-U.S. recycling returns
Non-U.S. customers should call the local HP sales and service office or visit the
http://www.hp.com/recycle website more information regarding availability of the HP printing
supplies returns and recycle program.
Paper
This printer is suited for the use of recycled papers when the paper meets the guidelines in the
information. This product is suitable for the use of recycled paper according to DIN 19309.
Material restrictions
This product does not contain added mercury (except lamps containing less than 10 mg).
This product does not contain added lead.
This product does not contain batteries.
Spare parts and supplies availability
Spare parts and consumable supplies for this product will be available for at least five years after
production has stopped.
For more information
For more information on the following HP environmental programs, see
●
●
●
●
●
Product environmental profile sheet for this and many related HP products
HP's commitment to the environment
HP's environmental management system
HP's end-of-life product return and recycling program
Material safety data sheets
106 Appendix A
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory statements
Declaration of Conformity
according to ISO/IEC Guide 22 and EN45014
Manufacturer's Name:
Hewlett-Packard Company
Manufacturer's Address:
11311 Chinden Boulevard
Boise, Idaho 83714-1021, USA
declares that the product
Product Name:
HP LaserJet 1150 printer
Q1336A
Product Number:
Regulatory Model Number3
BOISB-0208-01
ALL
Product Options:
conforms to the following Product Specifications:
Safety:
IEC 60950:1999 / EN 60950:2000
IEC 825-1:1993 +A1/ EN 60825-1:1994+A11 (Class 1 Laser/LED Product)
GB4943:1995
EMC:
CISPR 22:1997/ EN 55022:1998 Class B1
EN 61000-3-2:1995/A14
EN 61000-3-3:1995
EN 55024:1998
FCC Title 47 CFR, Part 15 Class B2 / ICES-003, Issue 3
)
AS / NZS 3548:1995 +A1 +A2 / GB9254:1998
Supplementary Information:
The product herewith complies with the requirements of the following EMC Directive 89/336/EEC and the
Low Voltage Directive 73/23/EEC, and carries the CE-marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
3) For regulatory purposes, this product is assigned a Regulatory model number. This number should not
be confused with the marketing name (HP LaserJet 1150 printer) or the product numbers (Q1336A).
Boise, Idaho USA
April 1, 2003
For Regulatory Topics ONLY, contact:
Australia Contact:
Product Regulations Manager, Hewlett-Packard Australia Ltd.,
31-41 Joseph Street, Blackburn, Victoria 3130, Australia
European Contact:
Your Local Hewlett-Packard Sales and Service Office or
Hewlett-Packard GmbH, Department HQ-TRE / Standards
Europe, Herrenberger Straße 140, D-71034 Böblingen
(FAX: +49-7031-14-3143)
USA Contact:
Product Regulations Manager, Hewlett-Packard Company,
PO Box 15 Mail Stop 160, Boise, ID 83707-0015
(Phone: 208-396-6000)
108 Appendix A
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of Conformity
according to ISO/IEC Guide 22 and EN45014
Manufacturer's Name:
Hewlett-Packard Company
Manufacturer's Address:
11311 Chinden Boulevard
Boise, Idaho 83714-1021, USA
declares that the product
Product Name:
HP LaserJet 1300 series
Q1334A, Q1335A, Q2484A
BOISB-0208-00
Product Number:
Regulatory Model Number3
Product Options:
ALL
conforms to the following Product Specifications:
Safety:
IEC 60950:1999 / EN 60950:2000
IEC 825-1:1993 +A1/ EN 60825-1:1994+A11 (Class 1 Laser/LED Product)
GB4943:1995
EMC:
CISPR 22:1997/ EN 55022:1998 Class B1
EN 61000-3-2:1995/A14
EN 61000-3-3:1995
EN 55024:1998
FCC Title 47 CFR, Part 15 Class B2 / ICES-003, Issue 3
)
AS / NZS 3548:1995 +A1 +A2 / GB9254:1998
Supplementary Information:
The product herewith complies with the requirements of the following EMC Directive 89/336/EEC and the
Low Voltage Directive 73/23/EEC, and carries the CE-marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
3) For regulatory purposes, this product is assigned a Regulatory model number. This number should not
be confused with the marketing name (HP LaserJet 1300 series) or the product numbers (Q1334A, Q1335A,
Q2484A).
Boise, Idaho USA
April 1, 2003
For Regulatory Topics ONLY, contact:
Australia Contact:
Product Regulations Manager, Hewlett-Packard Australia Ltd.,
31-41 Joseph Street, Blackburn, Victoria 3130, Australia
European Contact:
Your Local Hewlett-Packard Sales and Service Office or
Hewlett-Packard GmbH, Department HQ-TRE / Standards
Europe, Herrenberger Straße 140, D-71034 Böblingen
(FAX: +49-7031-14-3143)
USA Contact:
Product Regulations Manager, Hewlett-Packard Company,
PO Box 15 Mail Stop 160, Boise, ID 83707-0015
(Phone: 208-396-6000)
ENWW
Regulatory statements 109
Download from Www.Somanuals.com. All Manuals Search And Download.
Laser safety statement
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
has implemented regulations for laser products manufactured since August 1, 1976. Compliance
is mandatory for products marketed in the United States. The printer is certified as a “Class 1”
laser product under the U.S. Department of Health and Human Services (DHHS) Radiation
Performance Standard according to the Radiation Control for Health and Safety Act of 1968.
Since radiation emitted inside the printer is completely confined within protective housings and
external covers, the laser beam cannot escape during any phase of normal user operation.
WARNING!
Using controls, making adjustments, or performing procedures other than those specified in this user
guide could result in exposure to hazardous radiation.
Canadian DOC regulations
Complies with Canadian EMC Class B requirements.
«Conforme á la classe B des normes canadiennes de compatibilité électromagnétiques. «CEM».»
Korean EMI statement
VCCI statement (Japan)
110 Appendix A
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Laser statement for Finland
LASERTURVALLISUUS
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
HP LaserJet 1150, 1300 -laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite.
Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen ulkopuolelle.
Laitteen turvallisuusluokka on määritetty standardin EN 60825-1 (1993) mukaisesti.
VAROITUS!
Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
VARNING!
Om apparaten används på annat sätt än i bruksanvisning specificerats, kan användaren utsättas
för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
HUOLTO
HP LaserJet 1150, 1300 -kirjoittimen sisällä ei ole käyttäjän huollettavissa olevia kohteita. Laitteen
saa avata ja huoltaa ainoastaan sen huoltamiseen koulutettu henkilö. Tällaiseksi
huoltotoimenpiteeksi ei katsota väriainekasetin vaihtamista, paperiradan puhdistusta tai muita
käyttäjän käsikirjassa lueteltuja, käyttäjän tehtäväksi tarkoitettuja ylläpitotoimia, jotka voidaan
suorittaa ilman erikoistyökaluja.
VARO!
Mikäli kirjoittimen suojakotelo avataan, olet alttiina näkymättömälle lasersäteilylle laitteen ollessa
toiminnassa. Älä katso säteeseen.
VARNING!
Om laserprinterns skyddshölje öppnas då apparaten är i funktion, utsättas användaren för osynlig
laserstrålning. Betrakta ej strålen.
Tiedot laitteessa käytettävän laserdiodin säteilyominaisuuksista:
Aallonpituus 770-795 nm
Teho 5 mW
Luokan 3B laser
ENWW
Regulatory statements 111
Download from Www.Somanuals.com. All Manuals Search And Download.
112 Appendix A
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer media specifications
HP LaserJet printers produce excellent print quality. The printer accepts a variety of media, such
as cut-sheet paper (including recycled paper), envelopes, labels, transparencies, vellum, and
custom-sized paper. Properties such as weight, grain, and moisture content are important factors
affecting printer performance and output quality.
The printer can use a variety of paper and other print media in accordance with the guidelines in
this user guide. Media that does not meet these guidelines might cause the following problems:
●
●
●
Poor print quality
Increased media jams
Premature wear on the printer, requiring repair
For best results, use only HP brand paper and print media. Hewlett-Packard Company cannot
recommend the use of other brands. Because they are not HP products, HP cannot influence or
control their quality.
It is possible for media to meet all of the guidelines in this user guide and still not produce
satisfactory results. This might be the result of improper handling, unacceptable temperature and
humidity levels, or other variables over which Hewlett-Packard has no control.
Before you purchase a large quantity of media, make sure that it meets the requirements specified
purchase a large quantity.
CAUTION
Using media that does not meet Hewlett-Packard’s specifications might cause problems for the printer,
requiring repair. This repair is not covered by the Hewlett-Packard warranty or service agreements.
114 Appendix B
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Guidelines for using media
Paper
2
For best results, use conventional 20 lb (75 g/m ) paper. Make sure that the paper is of good
quality and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or
bent edges.
If you are unsure about what type of paper you are loading (such as bond or recycled), check the
label on the package of paper.
Some paper causes print quality problems, jamming, or damage to the printer.
Paper usage
Symptom
Problem with paper
Solution
Poor print quality or toner
adhesion.
Problems with feeding.
Too moist, too rough, too
smooth, or embossed.
Faulty paper lot.
Try another kind of paper:
between 100-250 Sheffield
and 4-6 percent moisture
content.
Dropouts, jamming, or curl.
Stored improperly.
Might be too heavy.
Store paper flat in its
moisture-proof wrapping.
Increased gray background
shading.
Use lighter paper.
Excessive curl.
Problems with feeding.
Too moist, wrong grain
direction, or short-grain
construction.
Use long-grain paper.
Print using the
straight-through output path.
Jamming or damage to printer. Cutouts or perforations.
Do not use paper with cutouts
or perforations.
Problems with feeding.
Ragged edges.
Use good quality paper.
Note
The printer uses heat and pressure to fuse toner to the paper. Make sure that any colored paper or
preprinted forms use inks that are compatible with the printer temperature (200° C or 392° F for
0.1 second).
Do not use letterhead that is printed with low-temperature inks, such as those used in some types
of thermography.
Do not use raised letterhead.
Do not use transparencies designed for inkjet printers or other low temperature printers. Use only
transparencies that are specified for use with HP LaserJet printers.
116 Appendix B
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Labels
Label construction
When selecting labels, consider the quality of the following components:
●
●
●
●
Adhesives: The adhesive material should be stable at 200° C (392° F), the printer’s
maximum temperature.
Arrangement: Only use labels with no exposed backing between them. Labels can peel off
sheets that have spaces between the labels, causing serious jams.
Curl: Prior to printing, labels must lie flat with no more than 13 mm (0.5 in.) of curl in any
direction.
Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.
Transparencies
Transparencies must be able to withstand 200° C (392° F), the printer’s maximum temperature.
ENWW
Guidelines for using media 117
Download from Www.Somanuals.com. All Manuals Search And Download.
Envelopes
Envelope construction
Envelope construction is critical. Envelope fold lines can vary considerably, not only between
manufacturers, but also within a box from the same manufacturer. Successful printing on
envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the
following components:
2
●
Weight: The weight of the envelope paper should not exceed 28 lb (105 g/m ), or jamming
might result.
●
Construction: Prior to printing, envelopes should lie flat with less than 6 mm (0.25 in.) curl
and should not contain air. Envelopes that trap air may cause problems.
●
●
Condition: Make sure that the envelopes are not wrinkled, nicked, or otherwise damaged.
Sizes: From 90 x 160 mm (3.5 x 6.3 in.) to 178 x 254 mm (7 x 10 in.).
Envelopes with double-side seams
An envelope with double-side-seam construction has vertical seams at both ends of the envelope
rather than diagonal seams. This style might be more likely to wrinkle. Make sure that the seam
extends all the way to the corner of the envelope as shown in the following illustration:
1
2
1
2
acceptable envelope construction
unacceptable envelope construction
Envelopes with adhesive strips or flaps
Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use
adhesives compatible with the heat and pressure in the printer: 200° C (392° F). The extra flaps
and strips might cause wrinkling, creasing, or jams.
Envelope storage
Proper storage of envelopes contributes to good print quality. You should store envelopes flat. If
air is trapped in an envelope, creating an air bubble, the envelope might wrinkle during printing.
118 Appendix B
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Card stock and heavy media
You can print many types of card stock from the paper input tray, including index cards and
postcards. Some card stock performs better than others because its construction is better suited
for feeding through a laser printer.
2
For optimum printer performance, do not use paper heavier than 42 lb (157 g/m ). Paper that is
too heavy might cause misfeeds, stacking problems, paper jams, poor toner fusing, poor print
quality, or excessive mechanical wear.
Note
You might be able to print on heavier paper if you do not fill the input tray to capacity and if you use
paper with a smoothness rating of 100-180 Sheffield.
Card stock construction
2
●
Smoothness: 36-42 lb (135-157 g/m ) card stock should have a smoothness rating of
2
100-180 Sheffield. 16-36 lb (60-135 g/m ) card stock should have a smoothness rating of
100-250 Sheffield.
●
●
●
Construction: Card stock should lie flat with less than 5 mm (0.2 in.) of curl.
Condition: Make sure that the card stock is not wrinkled, nicked, or otherwise damaged.
Sizes: Only use card stock within the following size ranges:
• Minimum: 76 x 127 mm (3 x 5 in.)
• Maximum: 216 x 356 mm (8.5 x 14.0 in.)
Card stock guidelines
Set margins at least 2 mm (0.08 in.) away from the edges.
ENWW
Guidelines for using media 119
Download from Www.Somanuals.com. All Manuals Search And Download.
120 Appendix B
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Hewlett-Packard software license agreement
ATTENTION: USE OF THE SOFTWARE IS SUBJECT TO THE HP SOFTWARE LICENSE
TERMS SET FORTH BELOW. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF
THESE LICENSE TERMS.
HP SOFTWARE LICENSE TERMS
The following License Terms govern your use of the accompanying Software unless you have a
separate signed agreement with Hewlett-Packard.
License Grant. Hewlett-Packard grants you a license to use one copy of the Software. “Use”
means storing, loading, installing, executing, or displaying the Software. You may not modify the
Software or disable any licensing or control features of the Software. If the Software is licensed for
“concurrent use,” you may not allow more than the maximum number of authorized users to Use
the Software concurrently.
Ownership. The Software is owned and copyrighted by Hewlett-Packard or its third-party
suppliers. Your license confers no title to, or ownership in, the Software and is not a sale of any
rights in the Software. Hewlett-Packard’s third-party suppliers may protect their rights in the event
of any violation of these License Terms.
Copies and Adaptations. You may only make copies or adaptations of the Software for archival
purposes or when copying or adaptation is an essential step in the authorized Use of the
Software. You must reproduce all copyright notices in the original Software on all copies or
adaptations. You may not copy the Software onto any public network.
No Disassembly or Decryption. You may not disassemble or decompile the Software unless HP’s
prior written consent is obtained. In some jurisdictions, HP's consent may not be required for
limited disassembly or decompilation. Upon request, you will provide HP with reasonably detailed
information regarding any disassembly or decompilation. You may not decrypt the Software
unless decryption is a necessary part of the operation of the Software.
Transfer. Your license will automatically terminate upon any transfer of the Software. Upon
transfer, you must deliver the Software, including any copies and related documentation, to the
transferee. The transferee must accept these License Terms as a condition to the transfer.
Termination. HP may terminate your license upon notice for failure to comply with any of these
License Terms. Upon termination, you must immediately destroy the Software, together with all
copies, adaptations, and merged portions in any form.
Export Requirements. You may not export or re-export the Software or any copy or adaptation in
violation of any applicable laws or regulations.
U.S. Government Restricted Rights. The Software and any accompanying documentation have
been developed entirely at private expense. They are delivered and licensed as “commercial
computer software” as defined in DFARS 252.227-7013 (Oct 1988), DFARS 252.211-7015 (May
1991), or DFARS 252.227-7014 (Jun 1995), as a “commercial item” as defined in FAR 2.101(a)
(Jun 1987), or as “Restricted computer software” as defined in FAR 52.227-19 (Jun 1987) (or any
equivalent agency regulation or contract clause), whichever is applicable. You have only those
rights provided for such Software and any accompanying documentation by the applicable DFARs
or FAR clause or the HP standard software agreement for the product involved.
122 Appendix C
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Hewlett-Packard limited warranty statement
DURATION OF WARRANTY:
One year from date of purchase.
1. HP warrants to you, the end-user customer, that HP hardware, accessories, and supplies, will be free from defects
in materials and workmanship after the date of purchase, for the period specified above. If HP receives notice of
such defects during the warranty period, HP will, at its option, either repair or replace products which prove to be
defective. Replacement products may be either new or like-new.
2. HP warrants to you that HP software will not fail to execute its programming instructions after the date of purchase,
for the period specified above, due to defects in material and workmanship when properly installed and used. If
HP receives notice of such defects during the warranty period, HP will replace software media which does not
execute its programming instructions due to such defects.
3. HP does not warrant that the operation of HP products will be uninterrupted or error free. If HP is unable, within a
reasonable time, to repair or replace any product to a condition as warranted, you will be entitled to a refund of the
purchase price upon prompt return of the product.
4. HP products may contain remanufactured parts equivalent to a new in performance or may have been subject to
incidental use.
5. Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or calibration, (b)
software, interfacing, parts or supplies not supplied by HP, (c) unauthorized modification or misuse, (d) operation
outside of the published environmental specifications for the product, or (d) improper site preparation or
maintenance.
6. HP MAKES NO OTHER EXPRESS WARRANTY OR CONDITION WHETHER WRITTEN OR ORAL. TO THE
EXTENT ALLOWED BY LOCAL LAW, ANY IMPLIED WARRANTY OR CONDITION OR MERCHANTABILITY,
SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO THE DURATION OF
THE EXPRESS WARRANTY SET FORTH ABOVE. Some countries/regions, states, or provinces do not allow
limitations on the duration of an implied warranty, so the above limitation or exclusion might not apply to you. This
warranty gives you specific legal rights and you might also have other rights that vary from country/region to
country/region, state to state, or province to province.
7. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR
SOLE AND EXCLUSIVE REMEDIES. EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL HP OR ITS
SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL
(INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR
OTHERWISE. Some countries/regions, states, or provinces do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND; THE WARRANTY TERMS
CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE,
RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO
THE SALE OF THIS PRODUCT TO YOU.
ENWW
Hewlett-Packard limited warranty statement 123
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited warranty for print cartridge life
Note
The following warranty applies to the print cartridge that came with this printer.
HP print cartridges are warranted to be free from defects in materials and workmanship until the
HP toner is depleted. The warranty covers any defects or malfunctions in a new HP print cartridge.
Frequently asked questions
How long does the coverage last?
The coverage lasts until the HP toner is depleted, at which time the warranty expires.
How do I know when the HP toner is running out?
The HP toner is depleted and the print cartridge has reached the end of its useful life when faded
or light type appears on the printed page or when a print cartridge life-low message appears on
the computer screen.
What will Hewlett-Packard do?
Hewlett-Packard will, at its option, either replace products that prove to be defective or refund the
purchase price. If possible, please attach a printout sample illustrating what the defective print
cartridge is printing.
What does this warranty not cover?
The warranty does not cover print cartridges that have been refilled or are emptied, abused,
misused, or tampered with in any way.
How do I return the faulty print cartridge?
In the event that the print cartridge proves to be defective, complete the Service Information Form
and attach a print sample illustrating the defect. Return the form and print cartridge to the place of
purchase, where the print cartridge will be replaced.
How does State, Province, or Country/Region Law apply?
This limited warranty gives you specific legal rights, and you may also have other rights which vary
from state to state, province to province, or country/region to country/region. This limited warranty
is the sole warranty on the HP print cartridge and supersedes any other warranty relating to this
product.
IN NO EVENT SHALL HEWLETT-PACKARD COMPANY BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, SPECIAL, INDIRECT, PUNITIVE, OR EXEMPLARY DAMAGES OR LOST
PROFITS FROM ANY BREACH OF THIS WARRANTY OR OTHERWISE.
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND; THE WARRANTY
TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY
PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO THE
MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO
YOU.
124 Appendix C
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware service
If your hardware fails during the warranty period, Hewlett-Packard offers the following support
options:
●
Hewlett-Packard repair services: Hewlett-Packard will arrange to pick up the unit, repair it,
and return it to you within 5 to 10 days, depending on your location.
●
Hewlett-Packard authorized service provider: You can return the unit to a local authorized
service dealer.
ENWW
Hardware service 125
Download from Www.Somanuals.com. All Manuals Search And Download.
Extended warranty
HP SupportPack provides coverage for the HP product and all HP-supplied internal components.
The hardware maintenance covers a three-year period from date of the HP product purchase. The
customer must purchase HP SupportPack within 180 days of the HP product purchase. For more
126 Appendix C
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Guidelines for repacking the printer
Use the following guidelines when repacking the printer:
●
If possible, include print samples and 5 to 10 sheets of paper or other media that did not print
correctly.
●
CAUTION
CAUTION
Static electricity can damage DIMMs. When handling DIMMs, either wear a grounded antistatic wrist
strap or frequently touch the surface of the DIMMs’ antistatic package before touching bare metal
on the printer.
●
●
Remove and keep any cables, trays, and optional accessories installed in the printer.
Remove and keep the print cartridge.
To prevent damage to the print cartridge, store the print cartridge in its original packing material, or
store it so that it is not exposed to light.
●
If possible, use the original shipping container and packing material. Shipping damage as a
result of inadequate packing is your responsibility. If you have already disposed of the printer’s
packing material, contact a local mailing service for information on repacking the printer.
●
●
Include a completed copy of the service information form.
Hewlett-Packard recommends that you insure the equipment for shipment.
ENWW
Guidelines for repacking the printer 127
Download from Www.Somanuals.com. All Manuals Search And Download.
How to contact HP
If you need to contact HP for service or support, use one of the following links:
●
●
In other locations, see http://www.hp.com
128 Appendix C
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Ordering supplies and
Daccessories
Ordering supplies and accessories
You can increase the printer’s capabilities with optional accessories and supplies.
Use accessories and supplies specifically designed for the HP LaserJet 1150 and
HP LaserJet 1300 series printers to ensure optimum performance.
The HP LaserJet 1300 series printer features Smart Printing Supplies. When you print a
Configuration page by pressing and holding the Go button for 5 seconds, a Supplies Status page
prints after the Configuraton page. The Supplies Status page has information on the amount of
toner remaining in the print cartridge, part numbers for ordering supplies, and whether the
installed print cartridge is a genuine HP supply item.
Supplies and accessories
Ordering information
Item
Description or use
Order number
Printing supplies
HP Multipurpose paper HP brand paper for a variety of uses
(1 box of 10 reams, 500 sheets each).
To order a sample, in the U.S.,
HPM1120
call 1-800-471-4701.
HP LaserJet paper
Premium HP brand paper for use with HPJ1124
HP LaserJet printers (1 box of
10 reams, 500 sheets each). To order
a sample, in the U.S., call
1-800-471-4701.
HP LaserJet
transparency film
HP brand transparency film for use
with HP LaserJet monochrome
printers.
92296T (letter)
92296U (A4)
ENWW
Ordering supplies and accessories 129
Download from Www.Somanuals.com. All Manuals Search And Download.
Ordering information (continued)
Item
Description or use
Order number
Print cartridge for
the HP LaserJet
1150 printer
UltraPrecise print
cartridge
Replacement print cartridges for the
HP LaserJet 1300 series printers.
Q2624A
Print cartridges for UltraPrecise print
Replacement print cartridges for the
HP LaserJet 1300 series printers.
Q2613A(2,500-page
cartridge
the HP LaserJet
cartridges
1300 series printer
Q2613X(4,000-page
cartridge)
Supplementary
documentation
HP LaserJet family
print media guide
A guide to using paper and other print 5963-7863
media with HP LaserJet printers.
Replacement parts Media pickup roller
Used to pick the media from the input RF0-1008CN
tray and advance it through the printer.
Input tray
Used to hold media for the printer.
RM1-0553-000CN
Input tray cover
Used to cover the media in the input
tray.
RM1-0554-000CN
RF0-1007CN
Q2485A
Separation pad for the Used to keep multiple sheets from
printer
feeding through the printer path.
Accessories
250-sheet
paper feeder
This is an accessory for the
HP LaserJet 1300 series printer. It
provides an additional 250-sheet input
tray.
130 Appendix D Ordering supplies and accessories
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
10/100 networking and wireless print servers
Ordering information
hp LaserJet 1150 printer
Item and description
Order number
J6035B
HP Jetdirect 175x fast-ethernet external print server (value line, USB port)
HP Jetdirect 310x fast-ethernet external print server (full featured, USB port)
HP Jetdirect 380x 802.11b wireless external print server (full featured, USB port)
HP Jetdirect WP110 802.11b wireless print server (value line, parallel port)
Bluetooth wireless printer adaptor for parallel port printers
J6038A
J6061A
J6062A
MPIPA330
hp LaserJet 1300 series printer
Item and description
Order number
J6039B
HP Jetdirect 200m fast-ethernet print server for LIO peripherals (value line)
HP Jetdirect 250m fast-ethernet LIO print server (full featured)
HP Jetdirect 280m 802.11b wireless LIO print server (full featured)
HP Jetdirect 175x fast-ethernet external print server (value line, USB port)
HP Jetdirect 310x fast-ethernet external print server (full featured, USB port)
HP Jetdirect 380x 802.11b wireless external print server (full featured, USB port)
HP Jetdirect WP110 802.11b wireless print server (value line, parallel port)
Bluetooth wireless printer adaptor for parallel port printers
J6042B
J6044A
J6035B
J6038A
J6061A
J6062A
MPIPA330
ENWW
Ordering supplies and accessories 131
Download from Www.Somanuals.com. All Manuals Search And Download.
132 Appendix D Ordering supplies and accessories
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Network configuration
E
Installing a shared printer on Windows 98 and Millennium
1
2
3
4
5
6
Quit all programs.
From the Windows system tray, click Start, select Settings, and click Printers.
Double-click the Add Printer icon.
In the Add Printer Wizard, click Next.
Select Network printer, and click Next.
Type the network share name in Network path or queue name (for example,
\\computer_name\printer_share_name), and click Next.
7
8
9
Click Have Disk.
Click Browse.
In the Open dialog, select the CD-ROM drive, select the appropriate .inf file, and click OK.
10 Select the HP LaserJet 1150 or HP LaserJet 1300 printer driver from the list, and click Next.
11 If you want to change the default printer name, type the new name in Printer name.
12 Click Next.
13 Select Yes, and click Finish. A test page prints verifying that the printer is set up properly.
ENWW
Network configuration 133
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing a shared printer on Windows 2000
1
2
3
4
5
Quit all programs.
From the Windows system tray, click Start, select Settings, and click Printers.
Double-click the Add Printer icon.
In the Add Printer Wizard, click Next.
Select Local printer, clear the Automatically detect and install my Plug and Play printer
check box, and click Next.
6
7
Select Create a new port, select Local Port from the Type drop-down list, and click Next.
In the dialog displayed, type the new port name (for example,
\\computer_name\printer_share_name), and click OK.
8
Select Use the following port, select the port name that you just created from the list,
and click Next.
9
Click Have Disk.
10 Click Browse.
11 In the Open dialog, select the CD-ROM drive, select the appropriate .inf file, and click Open.
12 Click OK.
13 Select the HP LaserJet 1150 or HP LaserJet 1300 printer driver from the list, and click Next.
14 If you want to change the default printer name, type the new name in Printer name.
15 Click Next.
16 Click Next.
17 Select Yes, and click Next.
18 Click Finish. A test page prints verifying that the printer is set up properly.
134 Appendix E Network configuration
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing a shared printer on Windows XP
1
2
3
4
5
6
Quit all programs.
From the Windows system tray, click Start, and select Control Panel.
Double-click Printers and Other Hardware.
Click Add a printer.
In the Add Printer Wizard, click Next.
Select Local printer, clear the Automatically detect and install my Plug and Play printer
check box, and click Next.
7
8
Select Create a new port, select Local Port from the Type drop-down list, and click Next.
In the dialog displayed, type the new port name (for example,
\\computer_name\printer_share_name), and click OK.
9
Select Use the following port, select the port name that you just created from the list, and
click Next.
10 Click Have Disk.
11 Click Browse.
12 In the Open dialog, select the CD-ROM drive, select the appropriate .inf file, and click Open.
13 Click OK.
14 Select the HP LaserJet 1150 or HP LaserJet 1300 printer driver from the list, and click Next.
15 If you want to change the default printer name, type the new name in Printer name.
16 Click Next.
17 Click Next.
18 Select Yes, and click Next.
19 Click Finish. A test page prints verifying that the printer is set up properly.
ENWW
Network configuration 135
Download from Www.Somanuals.com. All Manuals Search And Download.
136 Appendix E Network configuration
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing a memory DIMM (1300 series only)
If you add memory (RAM only) to the HP LaserJet 1300 series printer, you can print more complex
print jobs.
To install a DIMM, follow the instructions below:
CAUTION
Handling a DIMM chip (memory) without wearing a grounded, antistatic device might damage the
DIMM chip. Touch the printer or a piece of sheet metal before touching the DIMM.
1
Turn off the power switch, and unplug the printer.
2
Remove the parallel adaptor or the print server from the LIO connetivity slot.
3
Open the print cartridge door. To open the left side panel, gently pull it out.
138 Appendix F Memory
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Remove the DIMM chip from the antistatic bag it came in, grasping the chip on the top edge.
5
Position the DIMM chip in front of the slot located inside the I/O door. The gold contacts should
be pointing toward the printer and the cutouts should be at the top and bottom.
6
Carefully press the DIMM chip into the slot, making sure that it is straight and all the way
in (A). The cam latches, located at the top and bottom, should rotate inward. To snap the cam
latches into place, press the handles toward each other (B).
ENWW
Installing a memory DIMM (1300 series only) 139
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Close the left side panel and the print cartridge door. Reinstall the parallel adaptor or the print
server.
8
Plug the printer back in, and turn on the power switch.
Testing the DIMM installation
To test the DIMM installation, print a configuration page, and check the Total Memory specified on
If all lights on the control panel are blinking, the DIMM installation was unsuccessful. Remove the
DIMM and reinstall it.
140 Appendix F Memory
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing a DIMM
To remove a DIMM, follow the instructions below:
CAUTION
Handling a DIMM chip (memory) without wearing a grounded, antistatic device might damage the
DIMM chip. Touch the printer or a piece of sheet metal before touching the DIMM.
1
Turn off the power switch, and unplug the printer.
2
Remove the parallel adaptor or the print server from the LIO connetivity slot.
3
Open the print cartridge door. To open the left side panel, gently pull it out.
ENWW
Removing a DIMM 141
Download from Www.Somanuals.com. All Manuals Search And Download.
4
To unlock the cam latches, press them outward (A). Grasp the DIMM chip on the edge, gently
pull straight out, and remove the chip from the printer (B).
Note
Store the DIMM chip in an antistatic bag.
5
Close the left side panel and the print cartridge door. Reinstall the parallel adaptor or the print
server.
6
Plug the printer back in, and turn on the power switch.
142 Appendix F Memory
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Working with the print server
G
The HP LaserJet 1300n printer comes with an HP Jetdirect 200m print server. If you have an
HP LaserJet 1150 printer or an HP LaserJet 1300 printer, you can order a variety of print servers
The information in this appendix is based on the HP Jetdirect 200m print server. Be aware that if
you order a different print server, some of the following information might not apply.
This appendix provides information on the following topics:
●
●
●
●
●
●
ENWW
Working with the print server 143
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the print server
Insert the HP Jetdirect 200m print server into the LIO connectivity slot on the back of the printer.
Push the print server into the slot until it seats firmly and the latches click into place. See Network
The software for the print server is on the CD-ROM that comes with the HP LaserJet 1300n
printer. If you ordered the print server separately from the printer, the print server comes with a
CD-ROM containing the softare.
To install the print server software
1
2
Insert the CD into the computer’s CD-ROM drive.
The setup program should start automatically. If the setup program does not start, browse to
the CD-ROM drive and double-click SETUP.EXE.
3
Click Install to start the installation, and follow the on-screen instructions.
Printing a configuration page
The print server configuration page contains messages, network statistics, and status for the print
server. The configuration page also lists the print server’s IP address.
You can print the configuration page by pressing the Test button on the back of the print server.
You can also view the configuration page through the print server’s embedded Web server.
144 G Working with the print server
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the print server’s embedded Web server
The HP Jetdirect 200m print server has an embedded Web server that allows you to configure
various print server parameters in a standard Web browser. The print server’s supported Web
browsers are Internet Explorer version 5.0 or later and Netscape Navigator version 4.75 or later.
To use the print server’s embedded Web server, open the browser and type the print server’s IP
address as the URL. Print a configuration page to find the IP address. See Printing a configuration
Changing the IP address
The easiest way to change the print server’s IP address is to use the embedded Web server.
Note
Consult your network administrator before changing the print server’s IP address. Be sure to notify
other users of any changes.
1
2
3
4
Open a Web browser and type the print server’s current IP address as the URL.
Click the Networking tab.
In the TCP/IP section, change the configuration method to Manual.
Type a new IP address in the IP address box.
Note
You will lose your connection to the embedded Web server when you change the IP address. To
re-establish the connection, type the new IP address in the browser’s URL field.
ENWW
Using the print server’s embedded Web server 145
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting the print server
Installed print server stops working
If you have successfully installed a network printer and you are no longer able to print to it, the
problem might be related to Dynamic Host Configuration Protocol (DHCP).
In a DHCP environment, a DHCP server allocates IP addresses as computers and printers on the
network need them. DHCP-supplied addresses are dynamic and might cause problems for
computers and printers, which expect IP addresses to be static.
If your print server acquired its IP address via DHCP, the IP address might have changed after you
set up the printer. In this case, the printer is no longer available to the network. HP recommends
configuring the print server with a static IP address.
To assign a static IP address
Note
Consult your network administrator before changing the print server’s IP address. Be sure to notify
other users of any changes.
1
2
3
4
Open a Web browser and type the print server’s current IP address as the URL.
Click the Networking tab.
In the TCP/IP section, change the configuration method to Manual.
Type a new IP address in the IP address box.
Note
You will lose your connection to the embedded Web server when you change the IP address. To
re-establish the connection, type the new IP address in the browser’s URL field.
146 G Working with the print server
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Print server status light
The status light on the back of the print server can indicate problems with the print server. Use the
table below to interpret the print server status light.
Print server status light
Light behavior
Off
Description
The print server is not receiving power.
The print server is on and ready.
On (solid green)
Blinking slowly (amber)
An error occurred during a self-test or operation. Disconnect and reconnect
the print server. If the problem still exists, reinstall the print server software.
Blinking slowly (green)
The print server is receiving power, but it is not ready, or a self-test might be
in progress. Wait for the light to turn solid green.
The print server might have lost its connection to the network. Check the
10/100 link lights, which are located near the network connection. If the 10
and 100 link lights are both off, there is no network connection.
Blinking quickly (green)
The print server is processing the configuration page. Wait until the
configuration page finishes.
Flashing intermittently (green) The print server is on and ready, and there is activity on the network.
ENWW
Troubleshooting the print server 147
Download from Www.Somanuals.com. All Manuals Search And Download.
Restoring the factory default settings
Once you configure the HP print server, the configuration settings are retained in memory unless
you manually reset them to factory defaults using the following procedure.
1
2
3
Make sure the printer is turned on.
Unplug the print server from the printer.
While holding down the Test button on the print server, plug the print server back into the
printer. Continue to hold down the Test button for approximately 3 seconds.
148 G Working with the print server
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
memory
I
input tray
installing
IP address
N
network
J
jams
O
L
labels
lights
P
paper
pickup roller
port
loading media
M
Macintosh
media
print cartridge
print driver
print quality
150 Index
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
R
recycling
registration
print server
regulatory statements
repair
printer
S
selecting
service
settings
software
printer drivers
printer information pages
printer properties
printer settings
printing
ENWW
Index 151
Download from Www.Somanuals.com. All Manuals Search And Download.
T
text
U
USB
toner
transparencies
tray
W
warranty
wireless printing
troubleshooting
152 Index
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
copyright © 2003
Hewlett-Packard Company
www.hp.com
*Q1334-90941*
*Q1334-90941*
Q1334-90941
Download from Www.Somanuals.com. All Manuals Search And Download.
|