user guide
hp StorageWorks
network storage router
e1200-160
Product Version: 2.0
Third Edition (April 2003)
Part Number: 325741-001
The HP StorageWorks Network Storage Router provides bidirectional connectivity in a Fibre
Channel Switched Fabric supporting Fibre Channel and SCSI devices.
This user guide provides an overview, instructional information for configuration, and basic
troubleshooting of the router.
Download from Www.Somanuals.com. All Manuals Search And Download.
contents
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Prerequisites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Text Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Equipment Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Rack Stability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
HP Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
HP Storage Website . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
HP Authorized Reseller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
External Features Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Power Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Serial Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Ethernet Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Fibre Channel Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
SCSI Buses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Functional Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Fibre Channel to SCSI Protocol Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SCSI to Fibre Channel Protocol Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
LAN-free Backup and Restore. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Router Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Operating Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Shipping and Storing Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2 Configuration Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Router Default Ethernet Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
UI Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Visual Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Serial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Telnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
FTP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Common Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Controller LUN Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
SCSI Bus Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Fibre Channel Port Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Fibre Channel Switched Fabric Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Discovery Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Host Device Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Logical Unit Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Buffered Tape Writes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3 Visual Manager User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Visual Manager Menu Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Visual Manager Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Visual Manager Best Practices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
System Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Serial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
SNMP Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Active Fabric Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
User Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Real-Time Clock Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Reset Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Ports Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Fibre Channel Port Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
SCSI Bus Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Discovery Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Mapping Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Common Fibre Channel and SCSI Mapping Tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Fibre Channel Mapping Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
SCSI Mapping Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Statistics Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Utilities Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
FTP Utility Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Trace Settings Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Current, Previous, and Last Assert Trace Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Clear Current Traces and Clear Assert Traces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Event Log Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Event Log Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Clear Event Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Report Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Reboot Option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
4 Serial/Telnet User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Serial/Telnet Menu Tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Telnet UI Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Serial UI Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Power up Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Serial/Telnet UI Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Baud Rate Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Ethernet Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Fibre Channel Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Parallel SCSI Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Device Mapping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Trace and Event Settings Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Real-Time Clock Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Active Fabric Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Save Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Restore Last Saved Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Reset and Save Configuration to Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
System Utilities Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
System Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Event Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Trace Dump Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Saving Copies of the Trace Buffers using FTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Reboot Option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Download New Firmware Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
5 FTP User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
Access the FTP User Interface (UI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Backup and Restore Configuration Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Backing up the Router Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Restoring the Router Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Copy Trace Buffers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Upgrade Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
6 Basic Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Basic Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Verifying SCSI Bus Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Verifying Fibre Channel Port Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Verifying SCSI Devices in Windows NT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Verifying the Router Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Verifying Mapping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Verifying Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Verifying the Host Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Verifying HBA Device Driver Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Verifying Serial Port Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Verifying PRLI Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Introducing HP StorageWorks Library and Tape Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Software Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Finding Additional Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Getting Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
A Serial and Ethernet Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
RJ-11 Serial Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
RJ-45 Ethernet Cable Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
B Controller LUN Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
General Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Report LUNs Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Inquiry Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
C Addressing Methods and Table Structures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
SCC (SCSI Controller Command) Addressing Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Auto Assigned Addressing Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Indexed Addressing Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
D Regulatory Compliance Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
Federal Communications Commission Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Class A Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Class B Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Canadian Notice (Avis Canadien) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Class A Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Class B Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
European Union Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
BSMI Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Laser Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Laser Safety Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Compliance with CDRH Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Compliance with International Regulations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Laser Product Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Laser Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Grounding Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
8
Download from Www.Somanuals.com. All Manuals Search And Download.
about this
guide
About this Guide
About this Guide
F
This user guide provides information to help you:
■
■
■
Install the Network Storage Router
Configure the Network Storage Router
Troubleshoot the Network Storage Router
About this Guide topics include:
■
■
■
■
9
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Guide
Overview
This section covers the following topics:
■
■
■
Intended Audience
This guide is intended for administrators with a moderate knowledge level about
network environments.
Prerequisites
Before you install this product, make sure you consider the items below.
■
■
■
Knowledge of operation system
Knowledge of related hardware/software
Previous version of the product/firmware
Related Documentation
In addition to this guide, HP provides corresponding information:
■
Fibre Channel Physical and Signaling Interface (FC-PH), ANSI
X3T9.3/Project 755D/Rev. 4.3, Contact: Global Engineering,
1-800-854-7179
■
■
■
Fibre Channel Protocol for SCSI (FCP) Revision 12
Fibre Channel Private Loop Direct Attach (FC-PLDA)
Fibre Channel Arbitrated Loop (FC-AL), ANSI X3T11/Project
960D/Revision 4.54, Contact: Globe Engineering, 1-800-854-7179
■
■
Gigabit Interface Converter (GBIC), Small Form Factor. SFF-8053,
Revision 5.X
Common FC-PH Feature Sets Profiles, Fibre Channel Systems Initiative,
FCSI-101 Revision 3.1
■
■
SCSI Profile, Fibre Channel System Initiative, FCSI-201-Revision 2.2
FCSI IP Profile, Fibre Channel System Initiative, FCSI-202-Revision 2.1
10
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Guide
Conventions
Conventions consist of the following:
■
■
■
Document Conventions
Table 1: Document Conventions
Element
Convention
Cross-reference links
Figure 1
Key and field names, menu items,
buttons, and dialog box titles
Bold
File names, application names, and text
emphasis
Italics
User input, command and directory
names, and system responses (output
and messages)
Monospace font
COMMAND NAMES are uppercase
monospace font unless they are case
sensitive
Variables
<monospace, italic font>
Features that are “service-mode
restricted access,” or currently not
supported.
(service mode-restricted access)
(settings not supported)
Website addresses
Underlined sans serif font text:
http://www.hp.com
11
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Guide
Text Symbols
The following symbols may be found in the text of this guide. They have the
following meanings.
WARNING: Text set off in this manner indicates that failure to follow
directions in the warning could result in bodily harm or death.
Caution: Text set off in this manner indicates that failure to follow directions
could result in damage to equipment or data.
Note: Text set off in this manner presents commentary, sidelights, or interesting points
of information.
Equipment Symbols
The following equipment symbols may be found on hardware for which this guide
pertains. They have the following meanings.
Any enclosed surface or area of the equipment marked with these
symbols indicates the presence of electrical shock hazards. Enclosed
area contains no operator serviceable parts.
WARNING: To reduce the risk of personal safety from electrical shock
hazards, do not open this enclosure.
Any RJ-45 receptacle marked with these symbols indicates a network
interface connection.
WARNING: To reduce the risk of electrical shock, fire, or damage to
the equipment, do not plug telephone or telecommunications
connectors into this receptacle.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Guide
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. Contact with
this surface could result in injury.
WARNING: To reduce the risk of personal safety from a hot
component, allow the surface to cool before touching.
Power supplies or systems marked with these symbols indicate
the presence of multiple sources of power.
WARNING: To reduce the risk of personal safety from electrical
shock, remove all power cords to completely disconnect power
from the power supplies and systems.
Any product or assembly marked with these symbols indicates that the
component exceeds the recommended weight for one individual to
handle safely.
WARNING: To reduce the risk of personal safety or damage to the
equipment, observe local occupational health and safety requirements
and guidelines for manually handling material.
Rack Stability
Rack stability protects personnel and equipment.
WARNING: To reduce the risk of personal safety or damage to the
equipment, be sure that:
■ The leveling jacks are extended to the floor.
■ The full weight of the rack rests on the leveling jacks.
■ In single rack installations, the stabilizing feet are attached to the rack.
■ In multiple rack installations, the racks are coupled.
■ Only one rack component is extended at any time. A rack may become
unstable if more than one rack component is extended for any reason.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Guide
Getting Help
If you still have a question after reading this guide, contact an HP authorized
service provider or access our website: http://www.hp.com
.
HP Technical Support
In North America, call technical support at 1-800-652-6672, available 24 hours a
day, 7 days a week.
Note: For continuous quality improvement, calls may be recorded or monitored.
Outside North America, call technical support at the nearest location. Telephone
numbers for worldwide technical support are listed on the HP website under
support: http://www.hp.com/support
.
Be sure to have the following information available before calling:
■
■
■
■
■
■
■
Technical support registration number (if applicable)
Product serial numbers
Product model names and numbers
Software application name and version
Applicable error messages
Operating system type and revision level
Detailed, specific questions
HP Storage Website
The HP website has the latest information on this product, as well as the latest
appropriate product or solution.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Guide
HP Authorized Reseller
For the name of your nearest HP authorized reseller:
■
■
■
In the United States, call 1-800-345-1518
In Canada, call 1-800-263-5868
Elsewhere, see the HP website for locations and telephone numbers:
.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Guide
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
1F
The HP StorageWorks Network Storage Router provides bidirectional
connectivity for Narrow/Wide Fast/Ultra-3 SCSI buses in a Fibre Channel
Switched Fabric (FC-SW) environment.
This chapter introduces the following topics:
■
— Power Indicator
— Serial Port
— Ethernet Port
— Fibre Channel Port
— SCSI Buses
■
■
— Fibre Channel to SCSI Protocol Process
— SCSI to Fibre Channel Protocol Process
— LAN-free Backup and Restore
— Operating Environmental Requirements
— Shipping and Storing Environmental Requirements
— Power Requirements
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
External Features Overview
Figure 1 illustrates the I/O panel of the router.
Figure 1: Router illustration
Table 2: Router illustration components
Item
Description
Power LED
1
Serial RJ-11 connector
Ethernet RJ-45 connector
2
3
4
5
6
7
8
9
Fibre Channel activity LED
Fibre Channel link LED
Fibre Channel Port
SCSI bus activity LED (on corresponding port)
SCSI bus activity LED (on corresponding port)
SCSI VHDCI connector (2)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Power Indicator
The router has one power LED. Power indicator LED definition:
Green - Power has been applied to this module
Yellow - Power-On-Self-Test (POST) in process or processor problems
Serial Port
serial port.
The serial port can be used to access the Serial/Telnet user interface, which is used
to locally manage and configure the router.
Ethernet Port
the location of the Ethernet port. Ethernet port LED definition:
Activity - Port activity
Link - Valid Ethernet link
Fibre Channel Port
One Fibre Channel port with LED indicators is included in the router. See
Figure 1 for the location of the Fibre Channel port. Fibre Channel LED definition:
Green (ACT) - Fibre Channel port activity
Green (LINK) - Valid Fibre Channel link
SCSI Buses
the location of the SCSI buses. SCSI bus LED definition:
Green - SCSI bus activity on corresponding port
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Functional Overview
The router translates the Fibre Channel Protocol (FCP) to and from the SCSI
Protocol. It transfers commands, data, and status information to and from Fibre
Channel controllers and SCSI devices.
Supported devices include:
■
■
■
■
Initiator Devices – Fibre Channel and SCSI hosts
Direct Access Devices – RAID Controllers, disk drives, JBODs
Sequential Access Devices – Tape drives
Changer Devices – Tape and Magneto-Optical Libraries
The router provides multiple Fibre Channel to SCSI I/O configurations.
Figure 2: Example configuration
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Fibre Channel to SCSI Protocol Process
This section describes the steps the router uses to convert Fibre Channel host
process.
Figure 3: Converting Fibre Channel to SCSI process
Table 3: Converting Fibre Channel to SCSI
Item
1
Description
A Fibre Channel host issues an encapsulated FCP protocol command
packet to the router.
2
3
4
5
The router Fibre Channel controller interprets the Fibre Channel
information, and places the packet in buffer memory.
The router interprets the Fibre Channel information packet and programs
the router SCSI controller to process the transaction.
The router SCSI controller sends the command to the SCSI device
(target).
The SCSI target interprets the command and executes it.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
SCSI to Fibre Channel Protocol Process
In this example, a SCSI host (initiator) on the SCSI bus issues commands and the
information is passed through the router to a target on the Fibre Channel Storage
defines each step.
FC Device
5
StorageWorks Router
Hub or Switch
SCSI Host
4
3
FC Controller
2
FC Device
SCSI Controller
1
Fibre Channel
SCSI
Figure 4: Converting SCSI to Fibre Channel Protocol Process
Table 4: Converting SCSI to Fibre Channel Protocol
Item
1
Description
A SCSI host issues a command to the router.
2
3
4
5
The SCSI controller in the router interprets the command and places it in
buffer memory.
The router processor interprets data and programs the router Fibre
Channel controller to process the transaction.
The router Fibre Channel controller translates data into an FCP protocol
packet and sends it to the Fibre Channel target.
The Fibre Channel target interprets the FCP protocol packet and executes
the command.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
LAN-free Backup and Restore
The router can enable LAN-free backup/restore to allow the bulk of data traffic to
be moved from the LAN to the storage area network (SAN).
See Figure 5 for an illustration of this process.
Fibre Channel
ETHERNET
SCSI TAPE
UNIT
SCSI
DATA MOVEMENT
SCSI TAPE
UNIT
StorageWorks
Router
Fibre
Channel
Link/
Act
LVD/SE SCSl
0
FIBRE CHANNEL
DISK
Pwr.
1
Serial
Ethernet
Fibre
Channel
Link/
Act
LVD/SE SCSl
0
1
Pwr.
Serial
Ethernet
StorageWorks
Router
SAN
SERVER
SERVER
SERVER
SERVER
LAN
Figure 5: LAN-free backup and restore
Router Specifications
This section lists the environmental requirements of the router.
Operating Environmental Requirements
■
Temperature: 0 to 50°C
■
Relative Humidity: 5 to 80% (non-condensing)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Overview
2
2F
The HP StorageWorks Network Storage Router can be configured and managed
using several user interfaces (UI). Each UI is introduced in this chapter, along
with information about common configuration settings. Included are:
■
■
■
— Controller LUN Commands
— SCSI Bus Configuration
— Default Fibre Channel Port Configuration
— Fibre Channel Switched Fabric Configuration
— Discovery Mode
— Host Device Configuration
— Logical Unit Management
— Buffered Tape Writes
Note: Before attempting to configure the router, a basic understanding of Fibre Channel and
SCSI devices is recommended. For information on SCSI standards, refer to publications from the
X3T10 committee of ANSI (American National Standards Institute). For information on Fibre
Channel standards, refer to publications from the X3T11 committee of ANSI. For those who are
interested in purchasing approved American National Standards and Technical Reports, contact
ANSI at (212) 642-4900.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Overview
Router Default Ethernet Settings
Some of the basic factory default values are:
IP address: http://1.1.1.1/
Subnet mask: 255.255.255.0
■
■
■
■
■
Gateway address: 0.0.0.0
User name: root
Password: password
HP recommends that you change these values from the defaults.
All settings within the router configuration are preset with default values. These
values are set to allow the router to be installed into most HP environments with
little or no configuration changes.
After changing the basic default values listed above, carefully consider any
additional configuration changes.
After the initial configuration of the router is established, HP recommends
backing up the configuration to an external file. If needed, during a recovery
process, this file can then be restored back onto the router.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Overview
UI Overview
The router supports the following user interfaces:
■
■
■
■
Visual Manager
Serial
Telnet
FTP
Visual Manager
Visual Manager lets you view and change router configuration from any standard
Web browser. Information is dynamically generated in an HTML format so that
any Web browser can access it.
Unless the default values are used, the 10/100BaseT Ethernet port must be
configured using the serial port with an appropriate IP address, subnet mask, and
gateway prior to use.
For complete information on accessing and using Visual Manager, see Chapter 3,
Serial
The serial port allows for configuration of device characteristics from a terminal
or terminal emulator. Multiple serial connections cannot be run at the same time.
For complete information on accessing and using the Serial UI, see Chapter 4,
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Overview
Telnet
From most Microsoft® Windows® 9x, Windows NT®, and Windows 2000®
systems, users can start a Telnet session from the DOS (command) shell after the
IP address has been set.
For complete information on accessing and using the Telnet UI, see Chapter 4,
FTP
The router supports the use of the FTP UI to perform several copy procedures
using the putand the getcommands.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Overview
Common Configuration Settings
To provide connectivity between hosts and devices, the router must establish an
address on each connected Fibre Channel network and SCSI bus. The following
paragraphs discuss configuration settings that are commonly modified and are
available in the Visual Manager UI and the Serial/Telnet UI.
For procedural information on accessing and changing these settings, see Chapter
Controller LUN Commands
The router supports a set of SCSI-3 commands that can be received as FCP
commands over the Fibre Channel port. These commands provide support for
value added features such as Extended Copy (a future value added option). When
using these commands, they must be sent to the Controller LUN.
SCSI Bus Configuration
The router can appear on a SCSI bus as a pair of initiators. The primary Initiator
ID can be set to any valid SCSI address (0-15) and is used for most traffic. The
alternate Initiator ID can also be set to any valid SCSI address (0-15) and is for
use with high priority traffic. The Initiator IDs (primary and alternate) should not
be set to the same SCSI address and no other devices on the SCSI bus may use
either of these SCSI addresses.
The router can also appear as one or more Target ID on a SCSI bus. By default, no
Target IDs are set up.
The router provides the capability to reset SCSI buses during the router boot
cycle. This allows devices on a SCSI bus to be in a known state. The reset option
can be enabled/disabled during configuration of the router. The SCSI bus reset
feature is enabled in the default configuration, but should be disabled for
configurations using multiple initiators, tape changers or other devices that have
long reset cycles, or for environments that are adversely affected by bus resets.
The router negotiates the maximum values for transfer rates and bandwidth on a
SCSI bus. If an attached SCSI device does not allow the full rates, the router will
use the best rates it can negotiate for that device. Because negotiation is on a
device-specific basis, the router can support a mix of SCSI device types on the
same SCSI bus.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Overview
Fibre Channel Port Configuration
By default, the configuration of the Fibre Channel ports is set to N_Port, forcing
the router to negotiate a fabric only mode.
Note: By default, the Fibre Channel port speed is set to 2 Gb/s. Changes to the Fibre
Channel port speed must be manually set, such as for 1 Gb/s. If set incorrectly and the
router is plugged into a Loop or Fabric, the unit may receive framing errors, which can be
found in the trace logs, and the fiber link light will be off because of the incorrect Fibre
Channel link speed. For more information on manually setting the Fibre Channel port
Fibre Channel Switched Fabric Configuration
When connected to a Fibre Channel switch, the router is identified to the switch as
a unique device by the factory programmed World Wide Name (WWN).
Discovery Mode
This feature makes it easy to discover attached Fibre Channel and SCSI target
devices and automatically map them on the host side for the bus/port in question.
There are two discovery methods available:
■
Manual discovery
Auto discovery
■
Auto Discovery can be set to occur after reboot events (when the router reboots)
or link-up events (for instance, when cables are attached or a hub is rebooted).
Auto Discovery can be disabled by setting the router to Manual Discovery.
Host Device Configuration
A host system using a Fibre Channel Host Bus Adapter (HBA) will typically map
devices into the existing device-mapping scheme used by that operating system.
Refer to the HBA manual for the mapping table.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Overview
Mapping involves pairing FC_AL_PA to SCSI target address. The HBA will
claim enough SCSI bus entries to allow up to 125 Fibre Channel targets to be
mapped to SCSI Bus: Target entries. This is usually done by a fixed mapping of
AL_PA to Bus: Target. In such a configuration, the router corresponds to a
Bus: Target identifier, with the attached SCSI devices appearing as logical units
(LUNs). Operating systems can extend the available SCSI limit of 15 targets per
bus. Although this is not an issue for the operating system or most applications,
there are cases where older applications can have expectations about what
constitutes a valid SCSI ID, and thus may not correctly handle certain mappings.
In particular, some applications may exhibit difficulties addressing target IDs
greater than 15 (for example, 16 and up). This situation can be resolved by
configuring the router to use hard addressing and setting the AL_PA to a value
less then 16 that the HBA will be able to map.
For example, depending on the Fibre Channel HBA, if the hard AL_PA selection
is 1, then the address is 1. If the selection is 125, the AL_PA address is 0xEF.
Some Fibre Channel HBAs will map devices differently, so verify the AL_PA by
reviewing the documentation for the HBA.
Logical Unit Management
Because SAN resources can be shared, it is possible for multiple hosts to have
access to the same devices on the SAN. To prevent conflicts, the router provides
LUN management as a means to restrict device access to certain hosts. LUN
management goes beyond simple LUN masking, to prevent gaps in the list of
LUNs presented to a host.
LUN management maps can be created for different views of the devices attached
to the router. Each Fibre Channel host is assigned a specific map configuration.
Not only can the administrator control which devices a host may access, but also
which LUNs are used to access these devices.
For a Fibre Channel host, a map is a table of LUNs, where each entry is either
empty or contains device address information needed for host/device
communication.
For a SCSI host, a map contains a list of target IDs, each of which has its own
table of LUNs with address information needed for host/device communication.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Overview
Note: The router can respond to multiple Target IDs on a SCSI bus.
Both Fibre Channel ports and SCSI buses have predefined maps.
There are four predefined maps:
■
■
■
■
Indexed Map
Port 0 Device Map
Auto Assigned Maps
SCC Map
When a host sends a command, the router will select which map to use, based on
the port receiving the command and the ID of the host sending the command. For
Fibre Channel ports, the host ID is the World Wide Name; for SCSI buses, the
host ID is the Initiator ID (0 - 15). When a host is unknown or is not assigned a
specific map, the router will use the default map.
Indexed Map
An indexed map is initially empty.
Port 0 Device Map
The Port 0 Device Map should be used when editing and assigning oncoming
hosts.
Auto Assigned Map
An auto assigned map is built dynamically and contains all of the devices found
during discovery. This map will change automatically any time the discovery
process finds a change in the devices attached. This map cannot be modified by
the user.
SCC Map
An SCC map is only available on Fibre Channel ports and contains only a single
entry for LUN 0. This LUN is a router controller LUN. Access to attached devices
is managed using SCC logical unit addressing.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Overview
Buffered Tape Writes
This option is designed to enhance system performance by returning status on
consecutive write commands prior to the tape device receiving data. If data does
not transfer correctly, the router returns a check condition on a subsequent
command.
Commands other than Write are not issued until status is received for any pending
Write, and status is not returned until the device completes the command. This
sequence is appropriate for tasks such as file backup or restore.
Some applications require confirmation of individual blocks being written to the
medium, such as for audit trail tapes or log tapes. In these instances, the Buffer
Tape Writes option must be disabled.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Overview
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User
Interface
3
3F
The HP StorageWorks Visual Manager user interface (UI) provides a graphical
format that is used to remotely view and change router configurations. Use the
Microsoft Internet Explorer or Netscape (version 6.2 or greater) Web browsers to
access Visual Manager.
Information is presented in HTML format in accordance with the W3C
specification for HTML 3.2. Current W3C recommendations and other technical
documents can be found at www.w3.org/TR/
.
This chapter describes the menus and tasks of the Visual Manager UI and is
organized using the same structure as the Visual Manager UI:
■
■
■
■
■
— Serial Configuration
— Network Configuration
— SNMP Configuration (not supported)
— Active Fabric Configuration
— User Configuration
— Real-Time Clock Configuration
— Reset Menu
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
■
— Fibre Channel Port Configuration
— SCSI Bus Configuration
■
■
— Common Fibre Channel and SCSI Mapping Tasks
— SCSI Mapping Tasks
■
■
— FTP Utility Access
— Trace Settings Configuration
— Current, Previous, and Last Assert Trace Displays
— Clear Current Traces and Clear Assert Traces
— Event Log Configuration
— Event Log Display
— Clear Event Log
■
■
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Visual Manager Access
Visual Manager (VM) can be accessed from any standard Web browser:
1. Connect a 10/100BaseT Ethernet cable to the back of the router.
2. Apply power to the connected SCSI and/or Fibre Channel devices.
3. Apply power to the host computer.
4. Enter the router IP address in the address field of the Web browser of the host
computer.
Note: To access VM, the router must be assigned a valid IP address. The factory default
setting for the IP address allows access on a local area network only. If the factory default
for the IP address is already used by another device on the local network, the IP address
must be changed.
The factory default for the IP address is http://1.1.1.1/
Note: If the IP address of the router is not known or needs to be changed, connect to the
router using a serial connection. The current router IP address is displayed and can be
changed in the serial Ethernet Configuration Menu.
The Visual Manager home page is displayed, showing router status
information. The home page is accessible to anyone who knows the router IP
address.
5. Select the desired menu option to access menus and screens.
Password Dialog box.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
6. Enter the authorized user name and password. The username and password
are case-sensitive.
The default user name is rootand the default password is password.
Figure 7: Password Dialog Box
Note: HP recommends changing the user name and password from the defaults.
Note: To end the current session of VM, the browser window must be closed.
Navigating the browser to another URL does not end the current session.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Visual Manager Best Practices
The following recommendations should be observed:
■
A standard keyboard and mouse must be used to navigate in the VM.
■
The router is shipped with a configuration of default settings that is acceptable
for most system environments. Few changes to the configuration should be
necessary.
■
■
After any configuration changes are made, depending on the menu option,
select Submit or Configure to send changes from the Web browser to the
router.
Changes will take effect during the next router reboot cycle.
If the configuration has been modified to meet specific needs, back up the
configuration to an external file. If necessary, these settings can later be
restored to the router.
■
■
Except for the user name, password, and override access, fields are not
case sensitive.
HP recommends that you not bookmark VM pages with the Web browser.
Because configuration information is transmitted via URLs, it is possible that
the router could be configured with information present at the time a page was
bookmarked.
■
HP recommends navigating using only the Web page links contained in VM
itself.
Depending on the Web browser used, these links will often appear as
highlighted text. By selecting these links, VM can be safely navigated.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Main Menu
The Main Menu home page is displayed whenever VM is accessed.
The home page contains status information, including a physical image of the
router.
Figure 8 is an example of the home page.
Figure 8: Visual Manager Home page
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Home page information includes:
■
example of this portion of the home page screen. If the Internet is accessible
to the host, click the HP logo to open the website.
Figure 9: HP logo
■
An illustration of the router is located near the top of the home page.
Figure 10 is an example of this portion of the home page screen.
Figure 10: Router image
■
The router image is interactive, allowing quick access to configuration menus:
— To display current settings and status for a port, click the corresponding
port shown in the router image.
— To open a menu for making changes to the configuration for that
particular port or bus, click the desired Fibre Channel port or SCSI bus.
— To open the Network Configuration Menu, click the Ethernet port.
■
Router status information is located in the body of the home page and
includes platform information
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
■
Main Menu options:
— Home displays router status information.
— System configures standard system components.
— Ports configures the Fibre Channel port and SCSI buses.
— Discovery displays devices and discovers new devices.
— Mapping displays and configures maps.
— Statistics displays router statistics.
— Utilities configures utility settings.
— Report displays system information.
— Reboot restarts the router.
Each Main Menu option is discussed in the following sections of this chapter.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
System Menu
The System Menu is accessed from the Main Menu and is used to view and
configure serial, network, trap, active fabric, clock, and power supply
components.
Figure 11 is an example of the System page.
Figure 11: System page
System page tasks:
■
■
■
■
■
Serial configures the baud rate.
Network configures Ethernet settings.
SNMP is not supported.
Active Fabric configures Active Fabric settings.
User configures user security settings.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
■
■
Real-Time Clock configures system date and time.
Reset Menu
■
Factory Settings Reset restores factory default settings.
Each menu option is discussed in the following paragraphs.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Serial Configuration
The Serial screen is used to change the baud rate for the serial port.
Figure 12 is an example of the Serial screen.
If the Autobaud feature is being used, it may not be necessary to set the baud rate.
.
Figure 12: Serial screen
The current baud-rate setting is displayed.
Note: HP recommends setting the baud rate to 115200.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Network Configuration
The Network screen is used to enter network settings, including Ethernet settings.
Figure 13 is an example of the Network screen.
Figure 13: Network screen
Network Menu options:
■
Network Settings changes the hostname.
■
Port Configuration changes Ethernet configuration settings.
Each of these Network Menu options is discussed in the following sections.
Network Settings
To change the hostname, enter an alphanumeric entry of one word up to 8
characters in length. Then, select Submit.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Port Configuration - Ethernet Settings (Service Mode - Restricted Access)
To change the Ethernet configuration settings, select the Ethernet port icon. The
Ethernet Configuration dialog box is displayed.
Figure 14: Ethernet Configuration dialog box
Ethernet configuration settings:
■
Ethernet Mode can be set to one of the following options:
— 10Mps Only
— 100Mps (half duplex) Only
— 100Mps (full duplex) Only
— 10/100Mps (Auto-Neg.)
■
MAC address is the Ethernet physical address of the router.
Caution: If this configuration is incorrectly set, processing difficulties may occur.
Before changing this setting, evaluate the need for the change and verify the
desired setting. HP recommends backing up the router configuration to an
external file before making changes to this setting.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
The Ethernet physical address is always assigned by the manufacturer.
■
■
■
IP address (default: 1.1.1.1) is the IP address of the router.
Subnet Mask (default: 255.255.255.0) is the IP subnet mask for the router.
IP Gateway (default: 0.0.0.0) is the IP address of the gateway for the Ethernet
network connected to the router.
■
DHCP enables or disables support for Dynamic Host Configuration Protocol
(DHCP).
When DHCP is enabled, the router requests a dynamic IP address from a
DHCP server on the Ethernet network. The router must be rebooted before an
IP address will be requested from the DHCP server. After the router is
rebooted, the HTTP session must be restarted. The IP address will be different
from the former non-DHCP IP address.
Note: To use the DHCP feature, a DHCP server must be operational on the Ethernet
network. If the DHCP feature is used when there is not DHCP server, the standard for
DHCP requires the router wait thee minutes for a response from a DHCP server before
timing out.
Some DHCP servers allow a lease reservation to be set up for an IP address by
providing the server with the Ethernet MAC address. The DHCP server
always provides the same IP address to the router. This setup can be useful for
remote management of the router via Telnet or VM. Because the method of
setting up a lease reservation varies, depending on the DHCP server being
used contact the Network Administrator for assistance.
SNMP Configuration
SNMP configuration is not supported.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Active Fabric Configuration
The Active Fabric screen allows setup of Active Fabric options.
Figure 15 is an example of the Active Fabric screen.
Figure 15: Active Fabric screen
Active Fabric settings:
■
Number of Controller LUNs (default: 1) sets the number of controller LUNs
reported by the router.
The number must be in the range of 0 through 4.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
User Configuration
The User screen is used to set up router security.
Figure 16 is an example of the User screen.
Figure 16: User screen: security settings
User settings:
■
User Name (default: root) is any alphanumeric combination.
Password (default: password) is any alphanumeric combination.
■
The user name and password should be unique and kept confidential. HP
recommends using a combination of letters and numbers when creating the user
name and password.
Note: These security settings affect all user interfaces of the router.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Real-Time Clock Configuration
The Real Time Clock screen is used to set the system time and date.
Figure 17 is an example of the Real-Time Clock screen.
Figure 17: Real-Time Clock screen
Real-Time Clock settings:
■
Date Settings sets the month, date, and year.
Use a four-digit number to represent the year.
Day of Week sets the day of week.
■
■
Time Settings sets the hours, minutes, and seconds.
The system clock is a 24-hour clock.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Reset Menu
The Reset Menu is used to reset the router to factory default settings.
Figure 18 is an example of the Reset Menu.
Figure 18: Reset to Factory Default screen
Current router activities are disrupted while the unit resets the configuration to the
factory defaults and saves those options to FLASH memory.
Caution: Resetting the router configuration to the factory defaults will delete
custom maps or map changes.
Note: Resetting to factory defaults through VM will not affect Ethernet connectivity.
User-configured values for the IP address and gateway will be retained.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Ports Menu
Accessed from the Main Menu, the Ports Menu is used to view and to modify
configuration settings of the Fibre Channel port and SCSI buses.
Figure 19 is an example of the initial Ports Menu.
Figure 19: Ports menu
The initial screen display of the Ports Menu includes summary information about
each Fibre Channel port and SCSI bus in the router.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Note: To view or change configuration settings of a specific port or bus, select it from
the menu bar on the left side of the screen or select the port or bus from the router
image at the top of the screen.
To make changes, modify the setting and then click Submit.
Ports Menu tasks:
■
Fibre Channel Port configuration changes Fibre Channel port settings.
SCSI Bus configuration changes SCSI bus settings.
■
Each Ports Menu option is discussed in the following subsections.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Fibre Channel Port Configuration
When the Fibre Channel port is selected in Ports Menu, the Fibre Channel
Configuration screen is displayed. Figure 20 is an example of the Fibre Channel
Configuration screen.
Figure 20: Fibre Channel Configuration screen
Fibre Channel port settings:
■
Link Status indicates the port link status.
■
Port Name High sets a new value for the World Wide Port Name High.
(Service Mode - Restricted Access)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Caution: If the following configuration settings are incorrectly set, processing
difficulties may occur. Before changing these settings, evaluate the need for
the change and verify the desired setting. HP recommends backing up the
router configuration to an external file before making changes to these
settings.
■
■
Port Name Low sets a new value for the World Wide Port Name High.
(Service Mode - Restricted Access)
Port Mode (default: N_Port) sets the port mode.
Port Mode settings:
— Auto Sense: In this mode, the Fibre Channel port tries to negotiate as a
loop. If it is not successful, then the Fibre Channel port negotiates as a
fabric. If the port comes up as a loop, it then determines whether it is on a
private or public loop.
— N_Port: (default) This mode allows the router to bypass the loop
negotiation and come up as a fabric only. If the router is on a loop, and
N_Port mode is selected, an error in communication may occur.
■
■
Use Hard AL_PA enables or disables Hard AL_PA usage.
Hard AL_PA Settings displays the AL_PA Lookup Table.
Use the table to find the node number. This unique one-byte valid value
(derived from an Arbitrated Loop Topology defined in ANSI specification
FC_AL version 4.5) is used for the Fibre Channel configuration.
■
Discovery Mode (default: Manual Discovery Only) determines how the
router will discover new Fibre Channel devices.
Discovery mode settings:
— Auto Discovery on Reboot Events allows the router to automatically
discover all Fibre Channel devices when rebooted or when link-up events
occur, such as connecting cables or rebooting network hubs.
— Both the ports and the devices behind the ports are discovered on all
subsequent link-up events.
— Auto Discovery on Link Up Events allows the router to automatically
discover all Fibre Channel devices when rebooted or when link-up events
occur, such as connecting cables or rebooting network hubs.
— Both the ports and the devices behind the ports are discovered for the first
link-up event. Subsequent link-up events will only discover the ports and
not the devices behind the ports.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
— Manual Discovery Only (default) sets discovery of new devices to occur
only after the user selects the Discovery option from the Main Menu or
when a Registered State Change Notification (RSCN) is received from a
fabric.
Note: SCSI devices attached to a Fibre Channel must be mapped as sequential Fibre
Channel LUNs starting at LUN number 00. Skipping LUN numbers is not
recommended when mapping Fibre Channel LUNs because Fibre Channel Discovery
stops the discovery process whenever an empty LUN position is found.
■
Buffered Tape Writes (default: enabled) enables or disables the Buffered
Tape Write option.
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change
and verify the desired setting. HP recommends backing up the router
configuration to an external file before making changes to this setting.
When enabled, to enhance performance, Buffered Tape Writes return status
on consecutive write commands prior to the tape device receiving data.
■
■
Buffered Tape Queue Depth sets the Buffered Tape Queue Depth.
Select a setting of 0 through 10 from the drop-down list.
Default Map (default: indexed) sets the current mapping mode for the
selected port.
The current map can be set to:
— Port 0 Device Map (HP recommends that this map be used to edit and
assign oncoming hosts.)
— Indexed (default) (HP recommends that this map NOT be edited, even
though the user is able to edit the Indexed map.)
— Auto-assigned contains all the SCSI devices that are attached to the
router.
— SCC
later in this chapter.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
■
Performance Mode (default: 2 Gb/s) toggles between 1 Gb/s and 2 Gb/s.
Note: If Performance Mode is set incorrectly and the router is plugged into a Loop or
Fabric, the unit may receive Framing errors due to the incorrect Fibre Channel link
speed.
■
Override Settings (service mode-restricted access) enhances interoperability
with some storage devices that require special consideration during setup of
the router configuration menus.
— Hi-Sup Bit toggles between Set and Clear.
— Force FCP Response Code toggles between Off and On for support of
HP-specific HBA #223180-B21 and #120186-001.
— Initiator Bit toggles between Set and Clear.
When using the router in a router-to-router configuration, this option
should be configured to Set. A router-to-router configuration is a type of
configuration where one router appears as a target to another initiator
router.
— Link Garbage Deletion toggles between Enabled and Disabled.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
SCSI Bus Configuration
When a SCSI bus is selected in the Ports Menu, the SCSI Bus Configuration
screen.
Figure 21: SCSI Bus Configuration screen
SCSI bus configuration settings:
■
Primary Initiator ID (default: 7) must be a unique ID.
■
Alternate Initiator ID (service mode-restricted access) (default: none) will
be used if the primary ID is taken. Must be a unique ID.
■
Target ID(s) adds or removes Target IDs.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change
and verify the desired setting. HP recommends backing up the router
configuration to an external file before making changes to this setting.
Note: Target IDs must be setup before mapping devices on the SCSI bus.
Note: Do not enable Target IDs unless there is a SCSI initiator on the bus that wants to
use Fibre Channel devices. This type of configuration is known as a Target Mode
configuration.
■
■
Discovery toggles between Enabled and Disabled.
Discovery Delay is the wait time after a power-up or reboot before
discovering SCSI devices.
Note: HP recommends setting the value to at least 30 seconds to ensure all SCSI
devices complete their individual power-ups.
■
Bus Reset on Boot toggles between Enabled and Disabled.
When enabled, the router will automatically reset SCSI buses during a power
up or reboot of the router.
■
Internal Termination toggles between Enabled and Disabled.
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change
and verify the desired setting. HP recommends backing up the router
configuration to an external file before making changes to this setting.
When enabled, internal termination of the selected SCSI bus is allowed.
When disabled, the SCSI Bus, not the router handles SCSI termination.
■
Buffered Tape Writes (default: Enabled) toggles between Enabled and
Disabled.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
When enabled, Buffered Tape Writes enhance system performance. Buffered
Tape Writes return status on consecutive write commands prior to the tape
device receiving data.
■
Default Map (default: auto-assigned) sets the current mapping mode for the
selected bus.
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change
and verify the desired setting. HP recommends backing up the router
configuration to an external file before making changes to this setting.
The current map can be set to:
— Auto-assigned (default) contains all the devices attached to the router.
— Indexed
— SCC
— Custom
later in this chapter.
■
Override Settings (Service mode-restricted access) To override the settings
of a SCSI target, select a Target ID icon with the appropriate Target ID
number.
After a specific Target is selected, the SCSI Override sub-screen is displayed
and is used to enter the Override settings.
SCSI bus override settings:
— CDB Length Override enables or disables the override of default CDB
lengths.
— CDB Group 6 Length Default (default: 0) can be set to 0, 6, 10, or 12.
— CDB Group 7 Length Default (default: 0) can be set to 0, 6, 10, or 12.
— Wide Negotiation enables or disables negotiation on a wide SCSI bus.
— Synchronous Negotiation enables or disables synchronous negotiation
on the SCSI bus.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
— Synchronous Parameter Override enables or disables parameters for
synchronous negotiation.
— Synchronous Period (default: 40) sets the maximum number of seconds
allowed for negotiation.
— Synchronous Offset (default: 16) sets the maximum variation in transfer
rate that can be negotiated in megabytes per seconds (MB/s).
— Ultra SCSI-3 Negotiation enables or disables Ultra SCSI-3 support for
the selected Target ID.
When enabled, Ultra SCSI-3 Negotiation helps solve certain
compatibility issues in mixed vendor environments where there may be a
device that cannot handle automatic negotiation of the bus speed or where
there is a device that negotiates to use Ultra SCSI-3 but cannot handle the
speed.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Discovery Menu
Accessed from the Main Menu, the Discovery Menu is used to view Target
devices and discover new Target devices.
Figure 22 is an example of the Discovery page.
Figure 22: Discovery page
To perform a manual discovery:
1. Select the Fibre Channel port or SCSI bus from the menu bar or the router
image.
2. Select Go.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Mapping Menu
Each physical port/bus on the router can have the following maps:
Table 5: Device Map Types
Map Type
Auto Assigned
Indexed (default)
Port <0> Device
SCC
System/User Generated
Fibre Channel or SCSI
Fibre Channel and SCSI
Fibre Channel and SCSI
Fibre Channel
System
System
System
System
Fibre Channel
Note: Port 0 Device Map is the HP recommended map to be used for editing and
assigning oncoming hosts. The Indexed (default) map should not be used for editing,
even though the user is able to edit this map.
Each map has a unique name and map ID; one of the maps must be identified as
the “current” map for the router to use.
Accessed from the Main Menu, the Mapping Menu is used to view and modify
host and map information for a Fibre Channel port or SCSI bus. Maps and hosts
can be added, edited, or deleted.
To view or change map settings of a specific port or bus:
1. Select the port or bus from the menu bar on the left side of the screen or from
the router image at the top of the screen.
Specific mapping information is displayed, including the name of the port, the
selected host, and the assigned map.
2. To make changes to the configuration, enter the new value and then select
Submit.
Because some mapping configuration settings are the same for Fibre Channel and
SCSI maps and some settings are unique, this mapping section is subdivided as
follows:
■
■
■
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Common Fibre Channel and SCSI Mapping Tasks
Although the initial screen display for Fibre Channel and SCSI maps differs
slightly, the available actions are the same.
Figure 23 is an illustration of the Fibre Channel mapping screen.
Figure 23: Initial Mapping screen
Mapping screen options:
■
■
■
Select Host adds a known host.
To select a previously set up host, expand the Select Host drop-down box and
select the host from the list.
Edit/View Host displays or changes host information.
Viewing and changing host information is discussed in the following
paragraphs.
Delete Host deletes the current host.
Note: Host lists built during POST cannot be deleted.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
■
■
■
■
Add Map adds a new map.
To add an undefined map, type the name of the map in the Add Map field and
then click Add.
Select Map adds a known map.
To select a previously set up map, expand the Select Map drop-down box and
select the map from this list.
Edit/View Map displays or changes map information.
Viewing and changing map information is discussed in the following
paragraphs.
Delete Map deletes the current map.
Note: ‘Indexed,’ ‘Auto Assigned,’ and ‘SCC’ maps cannot be deleted or renamed.
Fibre Channel Mapping Tasks
Configuration tasks for Fibre Channel mapping includes:
■
■
Each task is discussed in the following paragraphs.
Note: Port 0 Device Map is the HP recommended map to be used for editing and
assigning oncoming hosts. The Indexed (default) map should not be used for editing,
even though the user is able to edit this map.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Viewing and Changing Fibre Channel Host Information
To view or change current host information:
1. In the Mapping Menu screen, select the desired Fibre Channel port.
2. Click Edit/View in the Host section of the screen.
The Fibre Channel Host Name dialog box is displayed. Current host
information is shown at the top of the dialog box.
3. Enter the new settings and then select Modify.
Fibre Channel Host Name settings:
■
■
■
■
■
■
■
Host Name
Host ID (hexadecimal)
Port WWN Hi (hexadecimal) (service mode-restricted access)
Port WWN Lo (hexadecimal) (service mode-restricted access)
Node WWN Hi (hexadecimal) (service mode-restricted access)
Node WWN Lo (hexadecimal) (service mode-restricted access)
Map Name
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Viewing and Changing Fibre Channel Map Information
Note: Port 0 Device Map is the HP recommended map to be used for editing and
assigning oncoming hosts. The Indexed (default) map should not be used for editing,
even though the user is able to edit this map.
To view or change current Fibre Channel map information:
1. In the Mapping Menu screen, select the Fibre Channel port.
2. Select Edit/View in the Map section of the screen.
The Fibre Channel Map dialog box is displayed. Current map information is
shown at the top of the dialog box.
3. Enter the new settings and then select the appropriate action button.
Note: Auto-Assigned and SCC maps cannot be modified, cleared, filled, or have
entries removed.
Note: Map settings are saved to memory when any button within the page is selected.
Fibre Channel map settings:
■
Clear Map clears all entries from the current map.
■
Remove Gaps removes any incremental gaps in the sequence of LUNs listed
in the table.
When the system removes gaps from the table, the LUNs are renumbered in
sequential order, starting with LUN 0.
Note: Some operating systems require gaps be removed in the mapping table in
order to detect all devices.
■
Fill Map fills in the current map.
To use the Fill Map option, expand the Fill Map Priority drop-down box,
select the fill option, and then click Fill Map.
When the map is filled, the display shows the current devices.
■
Delete deletes map entries.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
To delete map entries, expand the Delete Map Item LUN drop-down box,
select the LUN, and then click Delete.
To delete a range of LUNs, select the beginning LUN to delete from the
“from” drop-down box and select the last LUN to delete from the “to”
drop-down box.
■
■
Discovered Device Entry adds a discovered device to the map.
To add a discovered device to the map, use the drop-down boxes to enter the
settings, and then click Create Entry in the Discovered Device Entry section
of the screen.
Manual Device Entry creates a map entry for a device that is not yet
discovered or installed.
To add a new device to the map, use the drop-down boxes to enter the
settings, and then click Create Entry in the Manual Device Entry section of
the screen.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
SCSI Mapping Tasks
Configuration tasks for SCSI mapping include:
■
Viewing and Changing SCSI Host Information
Viewing and Changing SCSI Map Information
■
Each task is discussed in the following paragraphs.
Viewing and Changing SCSI Host Information
To view or change current SCSI host information:
1. In the Mapping Menu screen, select the desired SCSI bus.
2. Click Edit/View in the Host section of the screen.
The SCSI Host Name dialog box is displayed. Current host information is
shown at the top of the dialog box.
3. Enter the new settings and then click Modify.
Figure 24 is an example of the SCSI Host Name configuration dialog box.
Figure 24: SCSI Host Name dialog box
SCSI Host Name settings:
■
■
■
Host Name
Initiator ID
Map Name
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Viewing and Changing SCSI Map Information
To view or change current SCSI map information:
1. In the Mapping Menu screen, select the desired SCSI bus.
2. Select Edit/View in the Map section of the screen.
The SCSI Map dialog box is displayed. Current map information is shown at
the top of the dialog box.
3. Enter the new settings and then click the appropriate action button.
Figure 25 is an example of the SCSI Map dialog box.
Figure 25: SCSI Map Dialog box
Note: To map Fibre Channel devices to any SCSI initiator on the selected bus, a
Target ID must be enabled from the SCSI Bus Configuration Menu. A Target ID should
only be added if there is a SCSI initiator that needs to address Fibre Channel devices.
Each Target ID can be used to store up to 32 Fibre Channel devices.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Note: Auto-Assigned and SCC maps cannot be modified, cleared, filled, or have
entries deleted.
Note: Map settings are saved to memory when any button within the page is selected.
Note: SCSI maps can be filled or devices can be added to them only when at least
one SCSI Target ID has been enabled in the SCSI Bus Configuration Menu.
SCSI Map settings:
■
Clear Map clears all entries from the current map.
Fill Map fills in the current map.
■
When the map is filled, the display shows the current devices.
■
Remove Gaps removes any incremental gaps in the sequence of LUNs listed
in the table.
When the system removes gaps from the table, the LUNs are renumbered in
sequential order, starting with LUN 0.
Note: Some operating systems require gaps be removed in the mapping table to
detect all devices.
■
■
■
Delete deletes map entries.
To delete a range of LUNs, select the beginning LUN to delete from the
‘from’ drop-down box and select the last LUN to delete from the ‘to’
drop-down box.
Discovered Device Entry adds a discovered device to the map.
To add a discovered device to the map, use the drop-down boxes to enter the
settings, and then click Create Entry in the Discovered Device Entry section
of the screen.
Manual Device Entry creates a map entry for a device that is not yet
discovered or installed. To add a new device to the map, use the drop-down
boxes to enter the settings, and then click Create Entry in the Manual Device
Entry section of the screen.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Statistics Menu
Accessed from the Main Menu, the Statistics Menu is used to display Fibre
Menu.
Figure 26: Statistics menu
To view information for a specific port or bus, click the component on the menu
bar or the router image. To refresh the display, select Reset SCSI system
statistics.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Utilities Menu
Accessed from the Main Menu, the Utilities Menu is used to view and configure
utility options.
Figure 27 is an example of the Utilities Menu.
Figure 27: Utilities menu
Utility Menu tasks:
■
■
■
■
■
■
■
FTP Utility access opens an FTP session.
Trace Settings configuration configures trace settings.
Current Traces display displays current trace information.
Previous Traces display displays previous trace information.
Last Assert Traces display displays last assert trace information.
Clear Current Traces clears current trace information.
Clear Assert Traces clear current trace information.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
■
■
■
Event Log Settings configures Event Log settings.
Event Log display displays the Event Log.
Clear Event Log clears the Event Log.
Each Utility Menu option is discussed in the following sections.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
FTP Utility Access
The FTP utility screen is used to open an FTP session.
Figure 28 is an example of the FTP utility screen.
Figure 28: FTP Utility screen
The FTP utility requires the use of a JAVA applet and prompts for permission to
install the applet, if needed. If the prompt is displayed, follow the onscreen
instructions to complete the installation. The FTP utility then prompts for
permission to run the applet.
Note: Internet access is required to verify the signature for the HP FTP applet and to
download the JAVA applet plug-in for your browser.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
To open an FTP session:
1. Enter the User Name, Password, and the IP address of the router.
2. Click Connect.
3. Select the local file to upload or download. If necessary, click Browse to
scroll through a file list.
The following file types can be uploaded to the router:
■
Configuration (.cfg)
Firmware (.dlx)
■
The following file types can be downloaded from the router:
■
■
■
Configuration (.cfg)
Traces for the current boot cycle (curtrace.txt)
Traces from the previous boot cycle (prvtrace.txt)
4. Click Binary Transfer mode.
5. Choose the desired task:
■
To download a file, click Get.
To upload a file, click Put.
■
Note: If a valid firmware or configuration file is uploaded to the router, an automatic
reboot will occur once the file has been received. The router cannot be accessed from
the Visual Manager UI during the time that the reboot is in process, which is
approximately 30 seconds.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Trace Settings Configuration
The Trace Settings screen is used to configure the trace settings.
Figure 29 is an example of the Trace Settings screen.
Figure 29: Trace Settings screen
Current Trace settings are displayed.
To change the settings, use the drop-down boxes and choose the desired setting.
After all changes are completed, select Submit.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Table 6 is a brief description list of the trace settings.
Table 6: Trace Settings
Setting
Description
General Errors
FCP Transport
Displays the most serious errors and exception conditions.
Fibre Channel Protocol transport functionality will be
monitored and recorded.
PS Transport
PS Driver
Parallel SCSI transport functionality will be monitored and
recorded.
Parallel SCSI driver functionality will be monitored and
recorded.
Timing
AF
Timer functions will be monitored and recorded.
Active Fabric firmware will be monitored and recorded.
FCP Driver
Fibre Channel Protocol driver functionality will be monitored
and recorded.
FCP Management
Fibre Channel Protocol management functionality will be
monitored and recorded.
PS Management
SG List
Parallel SCSI functionality will be monitored and recorded.
Scatter/gather list will be monitored and recorded
FCP/RMI
Fibre Channel Protocol routing layer will be monitored and
recorded.
INBAND
Controller management functionality will be monitored and
recorded.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Current, Previous, and Last Assert Trace Displays
These three Utilities Menu screens show trace information. The Current Traces
screen shows data since the router was last booted. The Previous Traces screen
shows data from the last boot cycle. The Last Assert Traces screen shows data
since the last assertion.
Figure 30 is an example of the Current Traces screen.
Figure 30: Current Traces screen
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Clear Current Traces and Clear Assert Traces
These Utilities Menu screens are used to clear the current trace buffer or the assert
trace buffer.
Current router activities will not be disrupted while the buffer is cleared.
Figure 31 is an example of the Clear Current Trace Buffer screen.
Figure 31: Clear Current Trace Buffer screen
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Event Log Configuration
an example of the Event Log Filter configuration screen.
Figure 32: Event Log Settings screen
Event Log settings:
■
■
■
■
Log All Events
Disable/Enable Event Logging
Log Error Events
Log Notify Events
Event logging captures the last 215 events and then starts overwriting the log.
Note: To ensure accurate event logging, correctly set the clock and date in the Real
Time Clock Configuration Menu.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Event Log Display
The Event Log screen is used to view the Event Log.
Figure 33 is an example of the Event Log display screen.
Figure 33: Event Log Display screen
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Clear Event Log
The Clear Event Log screen is used to clear the Event Log.
Figure 34 is an example of the Clear Event Log screen.
Current router activities will not be disrupted.
Figure 34: Clear Event Log screen
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
Reboot Option
example of the Reboot screen.
When the router is rebooted, current router activities will be disrupted. All
submitted configuration changes will be activated during the boot-up process.
Caution: Confirm there is no activity, such as a backup in progress, before
initiating a reboot as router activities will be disrupted.
Figure 36: Reboot screen
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Visual Manager User Interface
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
4
4F
The Serial/Telnet User Interface (UI) is used to configure and manage the HP
StorageWorks Network Storage Router. This chapter describes the configuration
menus and option tasks available in the Serial/Telnet UI.
Note: Unless otherwise indicated, configuration changes take effect when the router
reboots.
During the router start up process, the Serial/Telnet UI displays initial power-up
messages. After the power-up process is completed, the Main Menu of the UI is
displayed. Within the router Main Menu, several configuration menus and tasks
are listed. All configuration and management tasks are performed from these
menus.
This chapter is organized using the same structure as the router Main Menu and its
associated sub-menus. The sections are:
■
■
■
■
■
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
■
— Baud Rate Configuration
— Ethernet Configuration
— Fibre Channel Configuration
— Parallel SCSI Configuration
— Device Mapping
— Trace and Event Settings Configuration
— Real-Time Clock Configuration
— Active Fabric Configuration
— Save Configuration
— Restore Last Saved Configuration
— Reset and Save Configuration to Factory Defaults
— System Statistics
■
■
— Event Log
— Saving Copies of the Trace Buffers using FTP
■
■
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Telnet UI Access
To open a Telnet session, the IP address of the router and a Telnet client utility are
required.
Note: After each reboot, a new Telnet session must be started. If the router is reset to
factory settings, the Ethernet port will have to be re-configured using the serial
interface.
From most Windows 9x, Windows NT, and Windows 2000 systems, a Telnet
session can be started from the Command (DOS) shell using the following steps:
1. From the Windows Start Menu, open the Command Prompt (DOS) window.
2. At the ‘>’ prompt, enter:
> TELNET <IP ADDRESS>
where <IP ADDRESS>is the IP address of the router
3. Enter the user name and password.
The default user name is rootand the default password is password.
HP recommends that the user name and password be changed from the default
values. The Configuration Menu is displayed.
Serial UI Access
To open a serial session, a terminal emulator utility is required.
From most Windows 9x, Windows NT, and Windows 2000 systems, a
HyperTerminal session can be started using the following steps:
1. From the Windows Start Menu, open HyperTerminal.
2. Name the new terminal session.
3. Indicate the appropriate COM port.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
4. Configure the serial port settings, as listed in Table 7.
Table 7: Terminal Configuration Settings
BAUD Rate
Autobaud, 9600, 19200, 38400, 57600, 115200
Data Bits
Stop Bit
8
1
Parity
None
Flow Control
XON/XOFF
Note: HP recommends setting the baud rate to 115200.
5. After completing the serial port configuration, select OK to start a serial
session.
6. After the serial session has started, press Enter several times to initiate router
communication and display the Configuration Menu.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Power up Messages
When power is applied to the router, a series of messages is displayed on the serial
terminal or terminal emulation program.
Figure 37 is an example of these power-up messages.
Figure 37: Power Up messages
Note: Throughout this chapter, XX represents value fields.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Serial/Telnet UI Main Menu
The Main Menu is the starting point for all configuration sub-menus and tasks.
Figure 38 is an illustration of the router Main Menu.
Note: If the power up messages and the Main Menu are not displayed, check the
serial port settings.
Figure 38: Serial/Telnet main menu
Main Menu options:
■
■
■
1) Perform Configuration enters router configuration settings.
2) System Utilities displays system statistics and perform diagnostic tests.
3) Display Trace and Assertion History displays trace information and clear
the trace buffer.
■
■
4) Reboot reboots the router.
5) Download a New Revision of the Firmware replaces the current revision
of the router firmware with a different copy of firmware.
Each Main Menu option is discussed in a separate section of this chapter.
Note: Except for the login process, uppercase and lowercase characters can be used
interchangeably in all of the menus.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Configuration Menu
The Configuration Menu is used to configure the router.
Figure 39 is an illustration of the Configuration Menu.
Figure 39: Configuration menu
Note: The router is shipped with a configuration of default settings that is acceptable
for most system environments. Few changes to the configuration should be necessary.
After any configuration changes are made, select A) Save Configuration to record the
changes.
If the configuration has been modified to meet company-specific needs, back up the
company-specific configuration to an external file. If necessary, these settings can later
be restored to the router.
Configuration Menu options:
■
1) Baud Rate Configuration changes the baud rate on the serial port.
■
2) Ethernet and SNMP (SNMP not supported) Configuration enters
Ethernet network settings.
■
■
3) Fibre Channel Configuration configures the settings for the Fibre
Channel port.
4) Parallel SCSI Configuration configures the settings for the SCSI buses.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
■
■
5) Device Mapping modifies map and host settings.
6) Trace and Event Settings Configuration modifies trace and event filter
settings.
■
■
7) Real-Time Clock Configuration sets the system clock.
8) Active Fabric Configuration enables and disables server-free backup and
changes the number of controller LUNs.
■
■
■
A) Save Configuration saves changes to memory.
B) Restore Last Saved Configuration reverts to the previous configuration.
C) Reset and Save Configuration to Factory Defaults resets all
configuration options to the factory defaults.
■
X) Return to Main Menu goes back to the previous screen.
Because the Configuration Menu is the primary menu in the UI, each
Configuration Menu option is discussed in a separate section.
Baud Rate Configuration
In the Configuration Menu, choose 1) Baud Rate configuration to change the
baud rate used on the serial port.
Figure 40 is an illustration of the Baud Rate Configuration Menu.
Figure 40: Baud Rate Configuration menu
Options include:
■
■
■
■
■
1) 9600
2) 19200
3) 38400
4) 57600
5) 115200
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Note: The asterisk (*) symbol indicates the current setting for the baud rate.
Note: If the Autobaud feature is being used, it is not necessary to set a baud rate.
Ethernet Configuration
In the Configuration Menu, choose 2) Ethernet and SNMP (SNMP not
supported) Configuration to set up the Ethernet network. When this option is
selected, the Ethernet Configuration Menu is displayed.
Current Ethernet settings are displayed, along with available Ethernet
Menu.
Figure 41: Ethernet Configuration menu
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
To view or change configuration settings:
1. Select a menu option
2. Make the configuration changes
3. Select X) Return to previous menu
4. Select A) Save Configuration to record the changes.
Ethernet Configuration Menu options:
■
1) Change IP address (default: 1.1.1.1) changes the router IP address.
■
2) Change IP Subnet Mask (default: 255.255.255.0) changes the router
Subnet mask.
■
■
3) Change IP Gateway (default: 0.0.0.0) changes the IP gateway for the
Ethernet network.
4) Change Ethernet Physical Address changes the Ethernet physical
address (MAC address).
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change
and verify the desired setting. HP recommends backing up the router
configuration to an external file before making changes to this setting.
The manufacturer always assigns Ethernet physical addresses to the Ethernet
adapters.
■
5) Toggle Ethernet Mode changes the Ethernet mode.
Options include:
— 10 Mb/s only
— 100 Mb/s (half duplex) only
— 100 Mb/s (full duplex) only
— 10/100 MPS (Auto-Neg.)
■
6) Change Hostname changes the name of the host server.
The name can be any combination of alphanumeric characters, up to eight
characters.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
■
7) Toggle DHCP Configuration enables or disables support for Dynamic
Configuration Protocol.
When DHCP is enabled, the router will request a dynamic IP address from the
DHCP server on the Ethernet network.
Some DHCP servers allow a lease reservation to be set up for an IP address by
providing the server with the Ethernet MAC address. The DHCP server will
then always provide the same IP address to the router. This setup can be
useful for remote management of the router such as Telnet or Visual Manager
Because the method of setting up a lease reservation varies depending on the
DHCP server being used, contact your Network Administrator for assistance.
Note: To use the DHCP feature, a DHCP server must be operational on the Ethernet
network. If the DHCP feature is used when there is no DHCP server, DHCP standards
require the router wait three minutes for a response from a DHCP server before timing
out.
■
■
8) Change SNMP Settings is not supported.
9) Change Security Settings changes security settings, including the user
name and password.
The default user name is rootand the default password is password.
Caution: To ensure security, change the user name and password from the
default settings.
Note: The security settings entered here affect all user interfaces.
User names and passwords should be unique and kept confidential. HP
recommends using a combination of letters and numbers when creating user
names and passwords.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Fibre Channel Configuration
In the Configuration Menu, choose 3) Fibre Channel Configuration to configure
the Fibre Channel port. The Fibre Channel Configuration Menu allows the
configuration of ALPA settings, discovery mode, tape backup settings, port mode,
default map, and override settings.
Figure 42 is an illustration of the Fibre Channel Configuration Menu.
Figure 42: Fibre Channel Configuration menu
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Fibre Channel Configuration Menu options:
Caution: If these configuration settings are incorrectly set, processing
difficulties may occur. Before changing these settings, evaluate the need for
the change and verify the desired setting. HP recommends backing up the
router configuration to an external file before making changes to these
settings.
■
■
■
1) Change World Wide Name High (service mode-restricted access)
changes the World Wide Port Name High.
2) Change World Wide Name Low (service mode-restricted access)
changes the World Wide Port Name Low.
3) Toggle Hard AL_PA Usage changes the Hard AL_PA usage to either Yes
or No.
— If set to Yes, a unique one-byte valid value (derived from an Arbitrated
Loop Topology as defined in ANSI specification FC_AL version 4.5) is
used for the Fibre Channel configuration.
— When configuring the Fibre Channel AL_PA, the router presents a list of
loop addresses along with the corresponding AL_PA. The user can select
a loop address.
■
■
4) Change AL_PA Value changes the AL_PA value. The AL_PA lookup
table is displayed. Enter a node number from the table.
5) Toggle Discovery Mode (default: Manual Discovery Only) determines
how the router will discover new Fibre Channel devices.
Options include:
— Auto Discovery on Reboot Events allows the router to automatically
discover all Fibre Channel devices during reboots, including both the
ports and the devices.
— Auto Discovery on Link-up Events allows the router to automatically
discover all Fibre Channel devices during reboots, including both the
ports and the devices for the first link-up event. Subsequent link-up
events will only discover the ports and not attached devices.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Note: SCSI devices attached to a Fibre Channel port must be mapped as sequential
Fibre Channel LUNs starting at LUN number 00. Skipping LUN numbers is not
recommended when mapping Fibre Channel LUNs because Fibre Channel Discovery
stops the discovery process whenever an empty LUN position is found.
Caution: If these configuration settings are incorrectly set, processing
difficulties may occur. Before changing these settings, evaluate the need for
the change and verify the desired setting. HP recommends backing up the
router configuration to an external file before making changes to these
settings.
— Manual Discovery Only (default) sets discovery of new devices to only
occur after the user selects the Refresh Device Display option. The
Refresh Device Display option is accessed from the System Utilities
Menu.
■
■
■
6) Toggle Buffered Tape Writes (default: Enabled) changes the tape backup
mode to either Enabled or Disabled.
7) Change Buffered Tape Queue Depth changes the tape backup queue
depth. Select a value from 0 through 10.
8) Toggle Port Mode (default: N_Port) changes the port mode to either Auto
Sense or N_Port:
— Auto Sense: In this mode, the Fibre Channel port tries to negotiate as a
loop. If it is not successful, then the Fibre Channel port negotiates as a
fabric. If the port comes up as a loop, it then determines whether it is on a
private or public loop.
— N_Port (default): This mode allows the router to bypass the loop
negotiation and come up as a fabric only. Use this setting if a HP switch is
being used. If the router is on a loop and N_Port mode is selected, an error
in communication may occur.
■
9) Change Default Map Value (default: Indexed) changes and displays the
default current map for the port.
Mapping modes can be Auto-Assigned, Indexed (default), or SCC.
For more information about addressing methods, see Appendix C,
■
A) Edit FC Override Settings (service mode-restricted access) enters Fibre
Channel override settings.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
A sub-screen is displayed, listing the following options:
— 1) Toggle Hi-Sup Bit Settings changes the Hi-Sup Bit settings.
Options include Set and Clear.
— 2) Toggle Forcing FCP Response Code for HP HBA #223180-B21 and
#120186-001, changes the forcing of the FCP response code.
Options include Off and On.
— 3) Toggle Initiator Bit Setting in PRLI_ACC changes the Initiator bit
setting. Options include Set and Clear.
If the router is deployed in a router-to-router configuration where at least
one router appears as target and another as initiator, set this option to Set.
— 4) Toggle FC Link Garbage Deletion changes the Fibre Channel Link
garbage deletion.
Options include Enabled and Disabled.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Parallel SCSI Configuration
In the Configuration Menu, choose 4) Parallel SCSI Configuration to configure
the SCSI buses. The Parallel SCSI Configuration Menu allows the configuration
of the SCSI discovery mode, SCSI bus reset, termination mode, tape backup
settings, and default current map.
Figure 43 is an illustration of the Parallel SCSI Configuration Menu.
Figure 43: SCSI Configuration menu
Current settings for the selected SCSI bus are displayed.
Caution: If these configuration settings are incorrectly set, processing
difficulties may occur. Before changing these settings, evaluate the need for
the change and verify the desired setting. HP recommends backing up the
router configuration to an external file before making changes to these
settings.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
SCSI Configuration Menu options:
■
1) Edit Initiator and Target Settings changes the SCSI Initiator and Target
settings.
The SCSI Initiator and Target Menu sub-screen is displayed, listing the following
options:
— 1) Enable/Disable SCSI Initiator enables or disables the SCSI Initiator.
Options are Enabled and Disabled.
— 2) Select primary and select/enable alternate SCSI ID sets the primary
and alternate initiator SCSI IDs (defaults: primary = 7; alternate = none).
These should be unique IDs on the bus.
— 3) Add Target ID or
— 4) Remove Target ID adds or removes a Target ID.
This adds an ID for a Fibre Channel device that responds to operation
requests from the SCSI initiator.
Note: Target IDs must be setup prior to mapping devices on the SCSI bus.
Note: Do not enable Target IDs unless a SCSI initiator on the bus wants to use Fibre
Channel devices. This type of configuration is known as a Target Mode configuration.
■
■
2) Enable/Disable SCSI Discovery enables or disables the Discovery Mode.
3) Enable/Disable SCSI Reset on Boot enables or disables automatic bus
resets after a reboot.
When enabled, the router will automatically reset SCSI buses during initial
power ups and reboots.
Caution: If these configuration settings are incorrectly set, processing
difficulties may occur. Before changing these settings, evaluate the need for
the change and verify the desired setting. HP recommends backing up the
router configuration to an external file before making changes to these
settings.
■
4) Set Discovery Delay Time sets the length of time the router waits after a
power-up or reboot before discovering SCSI devices.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Note: This value should be set to no less than 250ms, according to the SCSI standard
for Reset-to-Selection Time. HP recommends setting the value to at least 30 seconds to
ensure all SCSI devices complete their individual POST.
■
■
5) Set SCSI Termination Mode enables or disables the SCSI termination
mode.
6) Edit SCSI Target Override Settings changes the SCSI Target overrides.
SCSI Parameter Override Configuration Menu options:
— 1) Toggle CDB Length Override: enabled or disabled.
If enabled, the following configuration options are displayed:
CDB Group 6 Length Default (default = 0) can be set to 0, 6, 10, or 12.
CDB Group 7 Length Default (default = 0) can be set to 0, 6, 10, or 12.
— 2) Toggle Wide Negotiation: enabled or disabled.
— 3) Toggle Synchronous Negotiation: enabled or disabled.
If enabled, the following configuration options are displayed:
Synchronous Period (default = 40) is the maximum number of seconds
allowed for negotiation.
Synchronous Offset (default =16) is the maximum variation in transfer
rate that can be negotiated in MB/s.
— 4) Toggle Synchronous Parameter Override: enabled or disabled.
■
■
7) Enable/Disable Buffered Tape Writes (default: Enabled) enables or
disables Buffered Tape Writes.
Buffered Tape Writes return status on consecutive write commands before the
tape device receives data, to enhance performance.
8) Change Default Map Value sets the default map to use for the bus.
Mapping modes can be Auto-Assigned (default), Indexed, or SCC.
For more information about addressing methods, see Appendix C,
■
X) Return to previous menu returns to previous menu.
■ Command <Enter>scrolls to the next SCSI bus.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Device Mapping
Each physical port/bus on the router can have the following maps:
Table 8: Device Map Types
System/User
Generated
Map Type
Auto Assigned
Indexed (default)
Port <0> Device
SCC
Fibre Channel or SCSI
Fibre Channel and SCSI
Fibre Channel and SCSI
Fibre Channel
System
System
System
System
Fibre Channel
Each map has a unique name and map ID; one of the maps must be identified as
the “current” map for the router to use.
In the Configuration Menu, choose 5) Device Mapping to manipulate maps and
associate the selected hosts with a particular map. Maps are viewed, edited, and
deleted, in the Device Mapping Menu.
Figure 44 is an example of the Device Mapping Configuration Menu.
Figure 44: Device Mapping Configuration menu
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Device Mapping Configuration Menu options:
■
■
■
■
1) Select Current Map indicates which map is to be the current map.
2) Display Current Map displays the current map.
3) Edit Current Map changes current map settings.
4) Edit Host List for Current Map changes the host information for the
current map.
■
■
■
5) Display Device List displays the device list.
X) Return to previous menu returns to previous menu.
Command, <Enter> for next port/bus to scroll to the next SCSI bus, press
Enter.
Because each menu option includes a menu or sample screen display, each menu
option is discussed in the following separate sections.
Selecting the Current Map
In the Device Mapping Configuration Menu, choose 1) Select Current Map to
select the current map for each port or bus.
When this option is selected, the Select Current Map screen is displayed. The
illustration of the Select Current Map screen for a Fibre Channel port.
Figure 45: Select Current Map screen
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change
and verify the desired setting. HP recommends backing up the router
configuration to an external file before making changes to this setting.
To indicate which map is to be the current map, type the number that corresponds
to the desired map.
Displaying the Current Map
In the Device Mapping Configuration Menu, choose 2) Display Current Map to
view the entries for the current Map.
The Current Map Display screen is displayed.
Depending on whether a Fibre Channel map or a SCSI map was selected, the
screen display will differ.
Channel maps and SCSI maps.
Figure 46: FCP Current Map Display screen
Note: The entire list may not fit on one screen. Press N or P to go back and forth
between screens.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Figure 47: SCSI Current Map Display screen
Editing the Current Map
In the Device Mapping Configuration Menu, choose 5) Edit Current Map to edit
the current map.
The Map Edit Menu subscreen is displayed.
Figure 48 is an illustration of the Map Edit Menu.
Figure 48: Map Edit menu
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Note: Auto-Assigned and SCC Maps cannot be edited.
Map Edit Menu options:
■
■
■
■
1) Edit Name changes the name of the current map.
2) Edit Map Entries changes the content of the current map.
3) Clear Map erases all entries from the current map.
4) Fill Map automatically completes the entries for the current map.
Each editing option is discussed in the following sections.
Changing the Name of the Current Map
To change the name of the current map, in the Map Edit Menu, select 1) Edit
Name. Enter the new name at the prompt.
Note: Only user-defined map names can be changed.
Editing the Map Entries of the Current Map
To edit the details of the current map, in the Map Edit Menu, choose 2) Edit Map
Entries. This editing screen allows the user to navigate up and down the map
entries and create or remove entries. Device lists are also available to make it
easier to identify the device to be mapped.
Note: Mapping a device to its native port/bus is not allowed. The information needed
to create entries is protocol/port dependent.
Although the options are the same for editing Fibre Channel and SCSI maps, the
screen displays differ.
an example screen display for a SCSI map.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Figure 49: Edit Map Entries for a Fibre Channel map
Figure 50: Edit Map Entries for a SCSI map
Edit Map Entries options:
■
■
■
Next (N) scrolls down the list of map entries.
Previous (P) scrolls up the list of map entries.
Add (A) adds new map entries.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
■
■
■
■
Create (C) creates a new map entry for a newly added device.
Remove Gaps (R) removes gaps in the listed sequence of LUNs.
Delete (D) deletes a map entry.
Exit (X) returns to the previous menu.
Scrolling between Display Pages of the Edit Map Entries Screen
To scroll up and down the map entries, select P or N.
Adding a Map Entry to a Fibre Channel Map
To add a new entry to a Fibre Channel map:
1. In the Map Edit Entries screen, select Add (A).
2. Enter the desired LUN ID.
If the selected LUN is already present in the map, a prompt is displayed that
asks to either confirm the override or enter different address information.
A device selection list is automatically generated.
Note: Devices cannot be mapped to their native port.
3. To select the map entry to edit, enter the number from the left-hand column of
the Port Map Edit Display screen.
A Device List is displayed.
Figure 51: Device List generated for a Fibre Channel port
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
4. In the Device List, to add a listed device to the map, enter the number from
the “Num” column.
If the selected device is already mapped, an error message will appear,
warning the user about adding a duplicate device.
Adding a Map Entry to a SCSI Map
To add a new entry to a SCSI map:
1. In the Edit Map Entries screen, select Add (A).
2. Enter a Target/LUN ID combination.
If the selected Target/LUN is already present in the map, a prompt is
displayed that asks to either confirm the override or enter different address
information.
A device selection list is automatically generated.
Note: Devices cannot be mapped to their native port.
Note: A target ID must be defined in the SCSI Configuration to add devices.
3. In the Device List, to add a device to the map, enter the number from the
“Num” column. If the selected device is already mapped, an error message
will appear, warning about adding a duplicate device.
Note: If a device with LUN = “-‘ is selected, all LUNs for this Target will be added to
the map.
Creating a Map Entry for a Fibre Channel Map
To pre-enter a map entry for devices that are not yet online, select Create (C).
Note: All essential information about the device must be known.
A series of questions is displayed. The questions will vary based on the “current”
map protocol. Required information includes the LUN address, protocol, port,
device name, and device type.
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Figure 52 is an example of the screen display when creating an entry for a Fibre
Channel map.
Figure 52: Creating a map entry for a Fibre Channel map
Note: If the device being added is a SCSI device, the Target ID and LUN ID must be
entered. The Target ID must already be defined in the SCSI configuration.
Creating an Entry for a SCSI Map
To pre-enter a map entry for devices that are not yet online, select Create (C).
Note: All essential information about the device must be known.
A series of questions is displayed. The questions will vary based on the “Current”
map protocol. Required information includes the Target ID and LUN address,
protocol, port, device name, and device type must be entered.
Figure 53 is an example of the screen display when creating an entry for a SCSI
map.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Figure 53: Creating an entry for a SCSI map
Note: If the device being added is a Fibre Channel device, the Node WWN, Port
WWN, and LUN ID must be entered.
Note: If this device is a duplicate of a device currently present in the device list, an
error message will be displayed.
Removing Gaps in the Map
To remove any incremental gaps in the sequence of LUNs listed in the table, in
the Edit Map Entries screen, select Remove (R).
As the system removes any gaps from the table, the LUNs are renumbered in
sequential order, starting with LUN 0.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Note: Some operating systems require gaps be removed in the mapping table in
order to detect all devices.
Deleting a Map Entry
To delete an entry from a map, in the Edit Map Entries screen, select Delete (D).
For Fibre Channel maps, at the prompt, either enter the LUN ID of the LUN to
delete or enter D to delete multiple LUNs.
For SCSI maps, at the prompt, enter the Target ID and LUN ID of the LUN to
delete or enter D to delete multiple LUNs.
Clearing the Entries from the Current Map
To remove all entries from the current map, in the Edit Map Entries screen, select
3) Clear Map. A confirmation prompt is displayed.
Filling in the Current Map
To instruct the system to automatically fill in the current map, in the Edit Map
Entries screen, select 4) Fill Map.
All new devices are added to the end of the current map. After this operation is
completed, the Edit Map Entries Menu is redisplayed.
Note: Devices marked DOWN are not mapped.
Editing the Host List for the Current Map
In the Device Mapping Configuration Menu, choose 7) Edit Host List for
Current Map to edit the host list for the current map.
The current map can be associated with hosts available in the host list on the same
port where the map is defined. Initially all hosts are associated with an Auto
Assigned map. These are built at runtime hosts and cannot be edited or deleted.
Although the options are the same for FCP maps and SCSI maps, the screen
screens for FCP and SCSI maps.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Figure 54: Host List Display for Fibre Channel maps
Figure 55: Host List Display for SCSI maps
Host List Edit Display options:
■
■
■
■
■
■
Next (N) scrolls down the Host List.
Previous (P) scrolls up the Host List.
Add (A) adds a new host to the Host List.
Delete (D) deletes a host from the Host List.
Edit (E) edits host information.
Exit (X) returns to the previous menu.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Each of the options is discussed in the following paragraphs.
Scrolling between the Display Pages of the Host List Edit Screen
To scroll up and down the host entries, select P or N.
Selecting a Host
To select a host from the list, enter the number displayed in the “N#” or the
“Num” column at the left of the screen.
Adding a Host to the Host List
To add a host to the Host List, select Add (A).
If the host is an FCP host, the Host Name, Host ID, port WWN, and Node WWN
for FCP host must be entered. (WWN values are hexidecimal.)
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Figure 56 is an example of the screen display when adding a host to the Host List
of an FCP host.
Figure 56: Adding a host to the host list - FCP host
If the host is a SCSI host, the host name and the initiator ID must be entered.
Deleting a Host from the Host List
To remove a host from the Host List, select Delete (D). After entering the number
of the host to delete, a confirmation prompt is displayed.
Editing Host information
To change host information, select Edit (E).
Current host information is displayed on the screen. The system will display a
series of prompts, allowing changes to be entered.
Note: To retain the current information for a prompt, press Enter at the prompt.
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Figure 57 is an example of editing host information for a Fibre Channel port.
Figure 57: Editing host information on a Fibre Channel port
122
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Figure 58 is an example of editing host information for a SCSI bus.
Figure 58: Editing host information for a SCSI bus
Displaying the Entire Device List
In the Device Mapping Configuration Menu, choose 8) Display Device List to
view the entire device list for all buses and ports.
The Entire Device List screen is displayed.
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Figure 59 is an illustration of the Entire Device screen.
Figure 59: Entire Device List screen
Note: The entire list of maps may not fit on one screen. Select N or P to go back and
forth between screens displaying more maps. Select X to return to the previous menu.
Trace and Event Settings Configuration
In the Configuration Menu, choose 5) Trace and Event Settings Configuration
to view and change Trace and Event settings. When this option is selected, the
following menu is displayed.
Figure 60: Utility Settings (trace settings) menu
124
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Trace Settings Menu options:
■
1) Trace Settings Configuration configures the trace settings.
2) Event Settings Configuration configures the event settings.
■
Each of these options is discussed in the following sections.
Configuring Trace Settings
In the Utility Trace Settings Menu, 1) Trace Setting Configuration is used to
modify trace levels. Two pages of trace level settings are displayed.
Note: Trace settings should not be modified in normal operation; performance
degradation may result.
1. To change any of the settings in these screens, enter the number that
corresponds to the option that needs to be changed.
The current setting is toggled to either On or Off.
2. Repeat Step 2 for each setting that needs to be changed in the page.
3. Before leaving the page, activate the new setting by entering U) Update
Current Operating Trace Levels.
This option forces the currently displayed trace settings to become effective
immediately, without requiring a reboot or power cycle.
Figure 61: Trace Settings screen
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
4. Press Enter to display the second Trace Settings page.
Figure 62 is an illustration of the second Trace Settings page.
5. If needed, change the settings in the second Trace Settings page.
Note: Be sure to set the clock and date in the Real Time Clock Configuration Menu so
that event logging is accurate.
Figure 62: Trace Settings screen, continued
Configuring Event Settings
In the Utility Trace Settings Menu, 2) Event Setting Configuration is used to
modify event filters:
The following Event Filter Settings screen is displayed.
Figure 63: Event Filter settings
Note: The asterisk in the screen display denotes the current setting.
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
1. To change any of the settings in this screen, enter the number of the desired
setting (1, 2, 3, or 4) that corresponds to the option that needs to be changed.
Settings include:
■
■
■
■
1) Log All Events (default)
2) Disable Event Logging
3) Error Events
4) Notify Events
2. Before leaving the page, activate the new setting by entering U) Update
Current Operating Trace levels.
3. This option forces the currently displayed trace settings to become effective
immediately, without requiring a reboot or power cycle.
Note: Set the clock and date in the Real Time Clock Configuration Menu so that event
logging is accurate.
Real-Time Clock Configuration
In the Configuration Menu, choose 7) Real-time Clock Configuration to change
the system time and date.
Figure 64 is an illustration of the System Clock Setup Menu.
Figure 64: Clock Setup menu
1. To change the date or time, select 1) Set Clock.
2. A series of prompts are displayed, allowing setup of:
■
■
■
24-hour time
Current date
Current day of the week
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Active Fabric Configuration
In the Configuration Menu, select 8) Active Fabric Configuration to enter
Active Fabric options.
Figure 65 is an illustration of the Active Fabric Configuration Menu.
Figure 65: Active Fabric Configuration menu
Active Fabric Configuration Menu options:
■
1) Change the number of controller LUNs (default: 1) changes the
number of controller LUNs.
This setting is a number in the range of 0 through 4.
For more information on controller LUN commands, see Appendix B,
Save Configuration
In the Configuration Menu, A) Save Configuration is used to save any
configuration changes.
The current configuration state is saved in FLASH, which updates the previous
configuration. This configuration is retained across future device resets or power
cycles.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Restore Last Saved Configuration
In the Configuration Menu, B) Restore Last Saved Configuration is used to
revert to the previous configuration. This can be useful when configuration
changes have been made, and the user wishes to return to the previous
configuration.
Reset and Save Configuration to Factory Defaults
In the Configuration Menu, choose C) Reset and Save Configuration to reset the
router configuration to its initial settings (factory default).
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
System Utilities Menu
Accessed from the router Main Menu, the System Utilities Menu is primarily
used to view system information.
To access the System Utilities Menu, in the router Main Menu, choose 2) System
Utilities.
Figure 66 is an illustration of the System Utility Menu.
Figure 66: System Utility menu
System Utility Menu options:
■
■
■
1) System Statistics Menu displays a variety of system status information.
2) Event Log displays the system Event Log.
3) Enter System Diagnostics Mode performs Ethernet, SCSI, and Fibre
Channel connection tests.
Note: This option is reserved for service personnel and is not documented.
■
4) Special Fibre Channel Link States performs special diagnostics.
This option is reserved for service personnel and is not documented.
The System Statistics Menu and the Event Log options are discussed in the
following separate sections.
130
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
System Statistics
In the System Utility Menu, select 1) System Statistics Menu to view system
status information.
Figure 67 is an illustration of the System Status/Statistics Menu.
Figure 67: System Statistics menu
System Statistics Menu options:
■
1) Display System Status displays router status information.
■
2) Display Fibre Channel Protocol Status displays Fibre Channel status
information.
■
3) Display Parallel SCSI Protocol Status displays SCSI status information.
Because each option offers a variety of display screens, each of these menu
options is discussed in the following separate subsections.
Viewing System Status Information
In the System Statistics Menu, choose 1) Display System Status to view a variety
of status information, including memory statistics, current active tasks, and stack
usage.
The System Status Menu is displayed.
Figure 68 is an illustration of the System Status Menu.
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Figure 68: System Status menu
System Status Menu options:
■
■
■
■
1) Display memory statistics displays memory usage information
2) Display active tasks displays a list of current tasks.
3) Display stack usage displays current stack information.
4) Display SCSI Protocol Resources displays SCSI protocol information.
Viewing Fibre Channel Status Information
To display Fibre Channel status information, in the System Statistics Menu,
choose 2) Display Fibre Channel Protocol Status. The Fibre Channel Status
Figure 69: Fibre Channel Status menu
The Fibre Channel Status Menu lists the following options:
■
1) Display Fibre Channel Link Status displays Fibre Channel link
information.
132
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
■
■
■
2) Display Attached Fibre Channel Devices displays a list of devices
attached to this Fibre Channel port.
3) Display Fibre Channel Resource Status displays Fibre Channel resource
transport information.
4) Display Fibre Channel Driver Resource Status displays Fibre Channel
driver information.
Each menu option and example screen displays are discussed in the following
subsections.
Viewing Fibre Channel Link Information
To see link statistics for the Fibre Channel port:
■
1) In the Fibre Channel Status Menu, choose Display Fibre Channel Link
Status.
The following page is displayed.
Figure 70: Fibre Channel Link Status screen
■
A) To refresh the screen display, select Autorepeat.
133
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Table 9: Link Status Definitions
Link Status Field
Definition
LinkState
Current Fibre Channel link status.
AL_PA
Arbitrated loop physical address. (not supported)
Number of Device Data sequences received by this port.
InDevDataSeqs
OutDevDataSeq
Number of Device Data sequences transmitted by this
port.
InLnkDataSeqs
InP_BSYFrames
OutP_BSYFrms
InF_BSYFrames
InP_RJTFrames
OutP_RJTFrame
LinkDowns
Number of Link Data frames received by this port.
Number of P_BSY frames received by this port.
Number of P_BSY frames transmitted by this port.
Number of F_BSY frames received by this port.
Number of P_RJT frames received by this port.
Number of P_RJT frames transmitted by this port.
Number of Link Down conditions detected.
Number of ABTS frames received.
InABTSs
OutABTSs
Number of ABTS frames transmitted.
LaserFaults
Number of laser faults detected.
SignalLosses
SyncLosses
Number of times Loss of Signal was detected.
Number of times Loss of Sync was detected.
Number of bad characters received.
BadRxChars
LinkFailures
Number of Link Failure conditions.
BadCRCFrames
ProtocolErrs
BadSCSIFrames
Number of frames received with a bad CRC.
Number of protocol errors detected.
Number of BAD SCSI frames detected.
134
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Viewing Attached Fibre Channel Devices
To view a list of the devices attached to this port:
1. In the Fibre Channel Status Menu, choose 2) Display Attached Fibre
Channel Devices.
The Fibre Channel Device Display page is displayed.
Figure 71 is an illustration of the Fibre Channel Device Display page when it
is first displayed.
Figure 71: Fibre Channel Device Display page
2. To refresh the display, select R) Refresh Device Display.
Note: In Router-to-Router (R2R) configurations, only the first device of all the attached
devices will be shown. To see all of the devices in R2R configurations, use Visual
Manage.
3. To view device details, select D) Display Device Details.
135
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Viewing Fibre Channel Resource Transport Information
To view FCP transport information, in the Fibre Channel Status Menu, choose
3) Display Fibre Channel Resource Status.
The FCP Transport Queues page is displayed.
The FCP Transport Queue page has no options. It is used only for viewing
resource status.
Figure 72 is an illustration of the FCP Transport Queue page.
Figure 72: FCP Transport Queues screen
Viewing Fibre Channel Driver Status Information
To display Fibre Channel Driver Queue information, in the Fibre Channel Status
Menu, select 4) Display Fibre Channel Driver Resource Status.
The Fibre Channel Driver Queues page is displayed.
The Fibre Channel Driver Queues page has no options. It is used only for viewing
Fibre Channel driver resources.
Figure 73: Fibre Channel Driver Queues screen
136
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Viewing SCSI Status Information
To display SCSI status information, in the System Statistics Menu, choose
3) Display Parallel SCSI Protocol Status.
The Parallel SCSI Protocol Status Menu is displayed.
Figure 74 is an illustration of the SCSI Status Menu.
Figure 74: SCSI Status menu
SCSI Status Menu options:
■
■
■
1) Display SCSI Statistics displays SCSI statistics.
2) Display Attached SCSI Devices displays attached SCSI devices.
3) Display SCSI Resource Status displays SCSI resource status.
Each option is discussed in the following paragraphs.
Viewing SCSI Statistics
To view the SCSI status page, in the SCSI Status Menu, choose 1) Display SCSI
Statistics. There are no options in this display screen.
Viewing Attached SCSI Devices
To see a list of the devices attached to this SCSI bus in the SCSI Status Menu,
choose 2) Display Attached SCSI Devices.
The SCSI Device Display Menu is displayed.
137
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Figure 75 is an illustration of the SCSI Device Display Menu.
Figure 75: SCSI Device Display menu
SCSI Device Display Menu options:
■
1) Issue discovery for all buses issues a discovery command for all SCSI
buses.
■
2) Issue discovery for selected bus issues a discovery command for the
selected bus.
■
■
■
3) Issue boot discovery issues a boot discovery command.
4) Display all local devices displays a list of local devices for all buses.
5) Display local devices on specified bus displays a list of local devices for
the selected bus.
Viewing SCSI Resource Information
To display SCSI resource information, in the SCSI Status Menu, choose
3) Display SCSI Resource Status.
The SCSI Resource Display page is displayed. There are no options in the SCSI
Resource Display. It is used only for viewing SCSI resource status.
138
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Figure 76 is an illustration of the SCSI Resource Display page.
Figure 76: SCSI Resource Display screen
Event Log
In the System Utilities Menu, 2) Event Log is used to view and clear the system
Event Log.
Figure 77 is an illustration of the Event Log Menu.
Figure 77: Event Log menu
Event Log Menu options:
■
1) Display event log displays the Event Log.
■
2) Clear event log deletes all entries from the Event Log.
139
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Trace Dump Menu
In the router Main Menu, 3) Display Trace and Assertion History is used to
manage trace history information.
Figure 78 is an illustration of the Trace Dump Menu.
Figure 78: Trace Dump menu
Trace Dump Menu options:
■
■
■
1) Display trace for current boot cycle displays current boot cycle trace
history information.
2) Display trace from previous boot cycle displays previous boot cycle trace
history information.
3) Display trace from the last assertion failure displays trace history
information from the last assertion failure.
■
■
■
4) Clear current trace buffer clears the current trace buffer.
5) Clear (flash) assert trace buffer clears the assertion failure trace buffer.
X) Return to previous menu
Saving Copies of the Trace Buffers using FTP
Using an FTP session, the trace buffers from the router can be copied and saved.
1. Verify the router is connected to the Ethernet network.
2. Start an FTP session.
3. Enter the router IP address at the FTP prompt:
ftp <IP address>
140
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Note: Initially, the factory default router IP address is 1.1.1.1. To view the current IP
address, navigate to the Ethernet Configuration Menu and view the screen display.
See the “Configuration Menu” section for information on viewing and changing the
router IP address.
4. Specify the directory location on the computer or network where the FTP
program will store the trace file.
5. Enter the user name and password.
The factory default user name is rootand the default password is password.
6. Specify Bin mode:
bin
7. Enter the appropriate command to copy the current or previous trace buffer:
■
To copy the current trace buffer:
get curtrace.txt
■
■
The file will transfer from the router.
To copy the previous trace buffer:
get prvtrace.txt
■
The file will transfer from the router.
141
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Reboot Option
To reboot the router, in the Main Menu, select 4) Reboot.
After this option is selected, a confirmation prompt is displayed. If a positive
response is given to the confirmation message, the router is restarted.
Note: Current router activities will be disrupted during a reboot.
Download New Firmware Option
To download a new version of the firmware:
1. Select 5) Download a New Revision of the Firmware in the router Main
Menu.
A confirmation prompt is displayed.
2. Respond to the confirmation prompt.
3. Select Transfer, Send File in the terminal emulator utility.
4. Select the location of the firmware.
If necessary, use Browse to search for the file.
5. Select XMODEM as the transfer protocol.
6. Press the Send button.
The firmware will begin downloading to the router.
When the download process is complete, the system verifies that the firmware
image was successfully written to the FLASH memory and reboots. When the
router is rebooted, it detects that there is a newly downloaded firmware
image, copies that image to the boot sector of the FLASH, and boots using the
new image.
142
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
Figure 79 is an illustration of the Download Firmware Menu after a new version
of the firmware has been loaded.
Figure 79: Download Firmware menu
143
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial/Telnet User Interface
144
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP User Interface
Access the FTP User Interface (UI)
To access the router using an FTP UI:
1. Connect the router to the Ethernet network used by the host computer.
2. Start an FTP session using the router IP address:
ftp <IP address>
where IP address is the IP address of the router.
The default router IP address is 1.1.1.1.
Note: You may also need to specify the external directory location where your FTP
utility will store the backup configuration file.
3. Enter the user name and password.
The default user name is rootand the default password is password.
Backup and Restore Configuration Settings
The router supports the backup and restore of configuration settings over FTP.
This allows multiple configuration files to be maintained in a location external to
the router. When backing up a configuration, the settings are saved from the flash
memory on the router to a binary file in an external location determined by the
user.
146
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP User Interface
Backing up the Router Configuration
To backup the router configuration settings:
1. Connect the router to the Ethernet network used by the host computer.
2. Start an FTP session using the router IP address:
ftp <IP address>
where IP address is the IP address of the router.
The default router IP address is 1.1.1.1.
Note: You will need to specify the external directory location where your FTP utility is
to store the backup configuration file.
3. Enter the user name and password.
The default user name is rootand the default password is password.
HP recommends that the user name and password be changed from the default
values.
4. Specify binary mode:
bin
5. Specify the filename (with the extension .cfg) using the get command:
get filename.cfg
The file will transfer to the user-specified location.
Note: When backing up a configuration file, the World Wide Name (WWN) values
and Ethernet physical address (MAC address) values are not saved in the
configuration file. All other configuration settings are saved.
147
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP User Interface
Restoring the Router Configuration
To restore a configuration to the router:
1. Connect the router to the Ethernet network used by the host computer.
2. Start an FTP session using the router IP address:
ftp <IP address>
where IP address is the address of the router.
The default IP address of the router is 1.1.1.1.
3. Enter the user name and password.
The default user name is rootand the default password is password.
HP recommends that the user name and password be changed from the default
values.
4. Specify binary mode:
bin
5. Specify the configuration’s path and filename (with the filename extension
.cfg) using the put command:
put <path:filename.cfg>
The file is transferred to the router. After the file transfer is complete, the
router will automatically reboot. When the router completes the POST
process, it will use the restored configuration.
Note: When restoring a configuration, World Wide Name (WWN) values and
Ethernet physical address (MAC address) values revert to the factory default settings.
User defined values for these settings are not retained and must be re-entered after the
restoration of the configuration is complete.
Confirm the restored configuration by verifying that the settings are correct.
148
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP User Interface
Copy Trace Buffers
Use the following procedure to save copies of the trace buffers:
1. Connect the router to the Ethernet network used by the host computer.
2. Start an FTP session using the router IP address:
ftp <IP address>
where IP address is the address of the router.
The default router IP address is 1.1.1.1.
Note: You will need to specify the directory location where your FTP utility will store
the trace file.
3. Enter the user name and password.
The default user name is rootand the default password is password.
HP recommends that the user name and password be changed from the default
values.
4. Specify binary mode:
bin
5. Specify the filename (with the extension .txt) using the get command.
For the current trace buffer, use the following command:
get curtrace.txt
For the previous trace buffer, use the following command:
get prvtrace.txt
149
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP User Interface
Upgrade Firmware
Use the following procedure for Windows-based systems to upgrade the router
firmware.
Note: A JAVA applet-based FTP utility is also accessible from the UI.
1. Connect the router to the Ethernet network used by the host computer.
2. Start an FTP session using the router IP address:
ftp <IP address>
where IP address is the IP address of the router.
The default router IP address is 1.1.1.1.
3. Enter the user name and password.
The default user name is rootand the default password is password.
HP recommends that the user name and password be changed from the default
values.
4. Specify binary mode:
bin
5. Specify the path and filename (extension.dlx) of the firmware file to be
transferred by using the put command as shown:
put <path:filename.dlx>
The firmware file will be transferred and the router automatically reboots. The
firmware upgrade will be effective after POST process completes.
Note: Confirm the firmware level by checking the reboot messages through the serial
interface.
150
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Troubleshooting
6
6F
This chapter discusses some basic methods of identifying problems in the setup
and configuration of the HP StorageWorks Network Storage Router.
Most problems occur during the initial installation of the router. Before
proceeding with advanced troubleshooting techniques, verify all connections and
review the configuration.
The following topics are discussed in this chapter:
■
■
— Verifying SCSI bus configuration
— Verifying Fibre Channel Port Connection
— Verifying SCSI devices in Windows NT
— Verifying the router configuration
— Verifying mapping
— Verifying devices
— Verifying host configuration
— Verifying HBA device driver information
— Verifying serial port configuration
— Verifying PRLI data
151
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Troubleshooting
■
— Software Features
— Finding Additional Information
— Getting Support
152
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Troubleshooting
LED Indicators
The LED indicators on the router are useful for diagnosing various problems:
■
The Fibre Channel port LEDs indicates Fibre Channel activity and link
status. If one of these indicators does not light or stays continually lit without
any corresponding SCSI bus activity, it may indicate a problem with the Fibre
Channel link. Verify the Fibre Channel configuration.
■
The SCSI bus LEDs indicates SCSI activity. These indicators are lit during
power up, configuration, and when the unit is transferring data. If the SCSI
indicator stays continually lit without any corresponding Fibre Channel LED
activity, it may indicate a problem with the SCSI bus configuration. Verify
the SCSI bus configuration.
■
The Ethernet LEDs indicates activity and link status. If one of these indicators
does not light or stays continuously lit, it may indicate a problem with the
network connection. Verify the network connection. The port must be
connected to a 10/100BaseT Ethernet network to function properly.
For an illustration of the router components and LED locations, see Figure 80.
Figure 80: Router illustration
Table 10: Router illustration components
Item
1
Description
Power LED
Serial RJ-11 connector
Ethernet RJ-45 connector
Fibre Channel activity LED
Fibre Channel link LED
Fibre Channel Port
2
3
4
5
6
153
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Troubleshooting
Table 10: Router illustration components
Item
7
Description
SCSI bus activity LED (on corresponding port)
SCSI bus activity LED (on corresponding port)
SCSI VHDCI connector (2)
8
9
154
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Troubleshooting
Basic Troubleshooting
If possible, simplify the installation by reducing it to the most basic configuration.
Then, add elements one at a time, verifying the operation after each step.
Basic troubleshooting includes verifying the setup and the connections, including:
■
■
■
■
■
■
■
■
■
■
Verifying SCSI bus configuration
Verifying Fibre Channel port connection
Verifying SCSI devices in Windows NT
Verifying the router configuration
Verifying mapping
Verifying devices
Verifying host configuration
Verifying HBS device driver information
Verifying serial port configuration
Verifying PRLI data
Each of these topics is discussed in the following sections.
Verifying SCSI Bus Configuration
Items to check include:
■
Termination — Problems with termination can cause intermittent or hard
failures. A SCSI bus must be terminated on both ends. Termination problems
are common when both narrow and wide devices are on the same bus.
■
Bus Type — On an LVD SCSI bus, SE and LVD devices can be connected to
the same bus. However, if one SE device is detected during power up,
communication to all devices will convert to SE mode.
■
■
Device ID — Each device on a SCSI bus must have a unique ID. Verify
configured IDs are not in use by other devices on the same SCSI bus.
Cabling — Check SCSI cables to verify they are functional. SCSI rules for
total length, distance between devices, and stub length must be followed.
Connections should also be checked and reseated if necessary.
■
SCSI Devices — Verify that the SCSI devices on a particular SCSI bus can
be seen in the Configuration Menu of the router. If the router cannot see the
devices, verify SCSI configuration, cabling, and termination.
155
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Troubleshooting
Verifying Fibre Channel Port Connection
If SCSI devices are recognized on the SCSI buses, but do not appear to the Fibre
Channel host, it may be that the Fibre Channel link is not properly established.
Most hubs and switches have link indicators showing link status. When the router
is connected and powered on, this link indicator should be solid. If it is not, check
the cabling or connections.
One method of verifying link integrity when connected to a functional host,
involves disconnecting and then reconnecting the Fibre Channel cable. This
procedure should cause momentary activity of this indicator as the link
reinitializes.
Additionally, verify that the cable type of the router and the attached hub, HBA,
or switch is of corresponding types. When using optical media, verify that the
attached device is using non-OFC type optical devices.
Note: By default, the Fibre Channel port speed is set to 2 Gb/s. Changes to the Fibre
Channel port speed must be manually set, such as for 1 Gb/s. If set incorrectly and the
router is plugged into a Loop or Fabric, the unit may receive framing errors, which can be
found in the trace logs, and the fiber link light will be off because of the incorrect Fibre
Channel link speed. For more information on manually setting the Fibre Channel port
156
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Troubleshooting
Verifying SCSI Devices in Windows NT
If running Fibre Channel-to-SCSI mapping mode, verify the Fibre Channel and
the SCSI devices are recognized by the router.
Sometimes Windows NT may need to be rebooted with all SCSI devices and the
router powered up before recognizing the devices.
To verify the Fibre Channel and SCSI devices:
1. Navigate to the Windows NT Control Panel, and select SCSI Adapters.
2. Double click the Fibre Channel HBA.
The SCSI devices should be listed.
If no devices are listed, verify the router configuration, Fibre Channel HBA
configuration, and cabling.
If devices are listed, verify the Fibre Channel HBA mapping mode or the
AL_PA addresses.
Verifying the Router Configuration
If you are in doubt about the configuration or about the location of the error,
restore the router to the factory default configuration and proceed to configure the
unit one step at a time, verifying the functionality of the configuration after each
change is made.
Caution: Restoring factory defaults overwrites user configurations. In the
Serial/Telnet interface, use the save configuration option before resetting
factory defaults to allow recovery of user configuration.
Verifying Mapping
If the router is working in Fibre Channel-to-SCSI Initiator mode and is using
Indexed or SCC mapping, try changing to Auto-assigned mapping.
Verifying Devices
It may be useful to connect the SCSI target devices directly to a SCSI interface
(for example, a host SCSI bus) to verify that the devices are functional.
157
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Troubleshooting
Verifying the Host Configuration
In some cases, the Fibre Channel HBA or host device driver may not be working
properly. Check the configuration of these elements.
It may be useful to check the release notes for the device driver to see if there are
any specific issues or a required configuration. It may also be useful to ensure that
the current version of the HBA driver is being used.
There are cases where older applications can have expectations about what
constitutes a valid SCSI ID, and thus may not correctly handle certain mappings.
This is not an issue for the operating system or most applications. However, some
applications may exhibit difficulties addressing target IDs greater than 15 (16 and
higher.) To resolve this situation, configure the router to use hard addressing and
set the AL_PA to a value that the HBA will be able to map with an ID less than
16.
Verifying HBA Device Driver Information
Review the HBA device driver Readme.txt file for configuration specifics. An
HBA may require a different configuration. HBAs typically come with utility
programs to view or change their configurations.
Verifying Serial Port Configuration
If you are having problems connecting via the serial interface, verify the
configuration of the terminal or terminal emulation program.
Table 11: Terminal Configuration Settings
BAUD Rate
Autobaud, 9600, 19200, 38400, 57600, 115200
Data Bits
8
Stop Bit
1
Parity
None
Flow Control
XON/XOFF
If problems persist, verify the cabling.
If a valid Ethernet IP address is configured, serial configuration settings can also
be set via Telnet.
158
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Troubleshooting
Verifying PRLI Data
The router returns the PRLI (preliminary login) response data as specified in
Table 12.
In the default configuration, the router returns PRLI Data (PRLI Accept Payload)
with the Target bit SET and the Initiator bit CLEAR. However, some
configurations require the Initiator bit be SET, such as in router-to-router
configurations. See the Fibre Channel Overrides Menu for more information
about changing the initiator bit.
Table 12: PRLI
Item
PRLI Command Code
Page Length
Value
0x20
0x10
0x10
0x8
0x0
0x0
0x0
0x1
0x1
0x0
0x0
0x1
0x1
0x0
0x0
0x1
0x0
Payload Length
Type Code
Type Code Extension
OPA
RPA
IPE
Response Code
Originator Process Associator
Responder Process Associator
Initiator Function
Target Function
Command/Data Mixed Allowed
Data/Response Mixed Allowed
Read XFER_RDY Disabled
Write XFER_RDY Disabled
159
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Troubleshooting
Introducing HP StorageWorks Library and Tape Tools
To provide continued service to our customers, HP provides the HP
StorageWorks Library and Tape Tools (L&TT) software application. L&TT is a
diagnostic tool that is designed to aid in the installation and maintenance of both
HP tape devices and tape libraries. L&TT includes several features designed for
use by both HP storage customers and trained service personnel. The key features
include:
■
Diagnostic tools for tape drive and tape automation devices designed for
simple troubleshooting.
■
Multiple options for retrieving and updating both the latest firmware and the
most current version of L&TT.
Frequent firmware image updates are released on the Internet. For optimal
performance, HP recommends that you update your system periodically with the
latest device firmware.
L&TT is available for download at no cost from the HP website at:
Software Features
L&TT offers the following features:
■
Installation Check-L&TT guides the user through a basic installation check
of your product. The software assists the user in choosing an appropriate HBA
and SCSI ID(s), ensuring that the device is detected by the system, and
verifying key device functionality. This feature is essentially HTML
documentation that helps with the most common generic installation issues
while also describing how to use L&TT to verify the device installation.
■
■
Device Identification-L&TT clearly identifies the storage products
connected to the system, along with key information on product configuration
and status.
Troubleshooting Tests-L&TT provides various tests to verify product
functionality or to isolate product issues. Tests include device self-tests,
read/write tests on drives, exerciser tests for autoloaders and libraries, and
specific device utilities.
160
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Troubleshooting
■
Firmware Upgrades-L&TT provides a convenient way of updating product
firmware, enabling users with an Internet connection to take advantage of
ongoing enhancements. The software can be configured to check the Web
automatically for firmware updates for connected devices, or you can
manually check the Web for updates if the automatic update feature is not
desired. If updated firmware is available, the program notifies the user, and
the updates can easily be copied to the system. With libraries, users can
upgrade the library and the embedded drive firmware in the same operation.
Wherever possible, the embedded drives are updated in parallel to reduce
time.
■
■
■
Support Ticket Generation-If users experience a problem with a storage
product, L&TT can generate a support ticket that includes essential
information for troubleshooting the problem. As an alternative to phone
support, users can E-mail the support ticket to a support center for assistance.
This information streamlines the support process and enables the support staff
to better serve the user if a support call is made later.
Device Analysis-When you generate a support ticket for a device, L&TT
performs a Device Analysis test on the device. The support ticket contains
generic information about a device, as well as the results of the Device
Analysis test. You can perform the Device Analysis test by itself, but HP
recommends generating a support ticket because the resulting data is
presented in a more useful format.
Automatic Notification of Web Updates-If you have an Internet connection
and web updates are enabled in the tool preferences, you are automatically
informed of the following updates, if available, each time the program is
started:
— New versions of L&TT
— New firmware files for connected devices
— New device-specific functionality (such as new or updated tests) for
connected devices
161
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Troubleshooting
Finding Additional Information
The HP website provides the current version of L&TT for download, and general
information about the tool. Access the website at:
Getting Support
within 24 hours (usually sooner) during a normal business week.
Use this address to obtain support for L&TT, to report bugs, to report any issues
with the L&TT Website, or to provide enhancement suggestions. HP appreciates
feedback on how to make improvements for future versions of L&TT.
Note: This address is intended to provide support for L&TT software. This address is
NOT for assistance in troubleshooting hardware products. Refer to the documentation
that comes with your hardware for support options for that product.
162
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial and Ethernet Pin Assignments
RJ-11 Serial Pin Assignments
The layout of the pin assignments for the serial receptacle on the router is
6
5
4
3
2
1
Fibre
Channel
Link/
Act
1
Pwr.
Serial
Ethernet
Figure 81: RJ-11 Serial pin assignments
Table 13: RJ-11 Serial Pin Assignments
Item
1
Description
No connection
2
3
4
5
6
Serial common (ground)
Transmit data
Receive data
CTS (clear to send)
RTS (request to send)
Note: To connect the router to a host system, use a RS-232 null modem cable.
164
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial and Ethernet Pin Assignments
RJ-45 Ethernet Cable Pin Assignments
The layout of the pin assignments for RJ-45 Ethernet receptacle is illustrated in
1
2
3
4
5
6
7
8
Fibre
Channel
Link/
Act
Pwr.
1
Serial
Ethernet
Figure 82: RJ-45 Ethernet pin assignments
The router Ethernet connection supports the IEEE specifications for 10BASE-T
and 100BASE-TX Ethernet standards.
Table 14: RJ-45 Ethernet Pin Assignments
Item
1
Description
Transmit Out +
2
3
4
5
6
7
8
Transmit Out -
Receive in +
No Connection
No Connection
Receive in -
No Connection
No Connection
165
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial and Ethernet Pin Assignments
166
Download from Www.Somanuals.com. All Manuals Search And Download.
Controller LUN Commands
B
BF
The HP StorageWorks Network Storage Router supports and executes the set of
SCSI-3 commands listed in this Appendix. These commands can be received as
FCP commands over the Fibre Channel bus and are supported by the Controller
LUNs. This document refers to these commands as Controller LUN commands.
Complete definitions of SCSI-3 commands can be found in the SCSI-3 standard
available from the American National Standards Institute (ANSI).
This Appendix explains general Controller LUN commands.
To first determine which router LUNs are controller LUNs and which are device
LUNs, the host software must use the Inquiry general command.
Controller LUNs are addressable in all addressing modes. In SCC mode, there is
one controller LUN. In Auto-Assigned and Indexed modes, there can be up to four
configurable controller LUNs.
Note: Controller LUNs are numbered in sequence following the last device LUN,
without any gaps. A controller LUN may be placed anywhere in custom tables.
167
Download from Www.Somanuals.com. All Manuals Search And Download.
Controller LUN Commands
General Commands
■
Report LUNs
■
Inquiry
Each of these commands is discussed in the following paragraphs.
Report LUNs Command
The Report LUNs command returns a list of LUNs that can receive commands.
Table 15: Format of Report LUNs Command
Bit/
Byte
0
7
6
5
4
3
2
1
0
Operation Code (Example: 0xA0)
Reserved
1
2
Reserved
3
Reserved
4
Reserved
5
Reserved
6
Most Significant Byte (MSB)
Allocation Length
7
8
9
Least Significant Byte (LSB)
Reserved
10
11
Control Byte
168
Download from Www.Somanuals.com. All Manuals Search And Download.
Controller LUN Commands
Table 16: Report LUNs Data
Bit/
Byte
0
7
6
5
4
3
2
1
0
Most Significant Byte (MSB)
LUNs Length List
1
2
3
Least Significant Byte (LSB)
Reserved
4
5
Reserved
6
Reserved
7
Reserved
All LUNs are reported and will appear in the host map.
Note: In addition to the device LUNs, controller LUNs are also included in the report.
Controller LUN values are displayed at the end of the list. Controller LUN Inquiries
report peripheral device types as 0x0c.
Inquiry Command
Table 17: Format of LUN Inquiry Command
Bit/
Byte
7
6
5
4
3
2
1
0
0
Operation Code (Example: 0x12)
Reserved
1
EVPD
2
Page Code or Operation Code
Reserved
3
4
Allocation Length
Control
5
169
Download from Www.Somanuals.com. All Manuals Search And Download.
Controller LUN Commands
EVPD Page 0x80
If the EVPD bit (bit 0 of byte 1) is set and the Page Code is 0x80, the unit serial
Table 18: Format of EVPD Page 0X80
Bit/
Byte
0
7
6
5
4
3
2
1
0
Device Type (Example: 0x0c)
Page Code (80h)
Reserved
1
3
4
Page Length
5
Serial Number
The router returns the LUN Inquiry Data as defined in Table 19
Table 19: LUN Inquiry Data
Item
Value
Peripheral Qualifier
Peripheral Device Type
RMB
0x00
0x0C – Indicates Router/Router function
0x00
Device Type Qualifier
ISO Version
AENC
0x00
0x00
0x00
TrmIOP
0x00
Response Data Format
Additional Length
RelAdr
0x02 – SCSI-2 Inquiry Data Format
0x20
0x00
0x00
0x00
0x00
0x00
0x00
Wbus32
Sync
Linked
CmdQue
SftRe
170
Download from Www.Somanuals.com. All Manuals Search And Download.
Controller LUN Commands
Table 19: LUN Inquiry Data
Item
Value
Vendor ID
Product ID
Revision Level
“HP”
“router”
“XXXXXX”
The router will only reply to a SCSI Inquiry using 8-byte LUN field of 0x00.
Note: The Revision Level comes from the last four characters of the build string, which
appears in the headings for most menu screens.
171
Download from Www.Somanuals.com. All Manuals Search And Download.
Controller LUN Commands
172
Download from Www.Somanuals.com. All Manuals Search And Download.
Addressing Methods and
Table Structures
C
CF
Fibre Channel and SCSI systems use different methods of addressing devices. The
router has a method of translating device IDs so each SCSI device is mapped to
the appropriate Fibre Channel LUN. The SCSI buses establish the bus connections
between devices. Targets on a SCSI bus may internally address LUNs. The
addressing of a specific SCSI device is represented by the BUS:TARGET:LUN
triplet.
When a Fibre Channel Initiator initializes on a loop, the host must first determine
what devices exist on the loop. Device discovery is performed and an FCP target
device list is built. Each device is queried for FCP LUNs (the LUNs are the actual
devices that the operating system will address.) The addressing used is the SCC
Logical Unit Addressing and Peripheral Device Addressing method, shown in
Table 20 through Table 23. First level addressing is supported, so only the first
two bits of the 8-bit FCP LUN are used.
173
Download from Www.Somanuals.com. All Manuals Search And Download.
Addressing Methods and Table Structures
Table 20: Addressing Sequence
Bit/Byte
N
7
6
5
4
3
2
1
0
Address Method
Address Method Specific
N+1
Address Method Specific
Table 21: Address Method Definitions
Code
Description
00
01
10
11
Peripheral Device Addressing Method
Volume Set Addressing Method
Logical Unit Addressing Method
Reserved
Table 22: SCSI Logical Unit Addressing
Bit/Byte
N
7
6
5
4
4
3
3
2
2
1
1
0
0
1
0
Target
Table 23: Peripheral Device Addressing
Bit/Byte
N
7
6
5
0
0
Bus
N+1
Target/LUN
174
Download from Www.Somanuals.com. All Manuals Search And Download.
Addressing Methods and Table Structures
Depending on the configuration, the router supports the Peripheral Device
Addressing method and the Logical Unit Addressing method.
The data shown in Table 24 comes from the Fibre Channel Configuration Menu.
The administrator enters the node number (number to the left of the colon in
Table 24) and the router translates the node number into the corresponding
AL_PA value (number to the right of the colon in Table 24).
Table 24: Arbitrated Loop Node-Number to AL-PA Lookup Table
0:0x01
1:0x02
2:0x04
3:0x08
4:0x0F
21:0x2E
22:0x31
23:0x32
24:0x33
25:0x34
26:0x35
27:0x36
28:0x39
29:0x3A
30:0x3C
31:0x43
32:0x45
33:0x46
34:0x47
35:0x49
36:0x4A
37:0x4B
38:0x4C
39:0x4D
40:0x4E
41:0x51
42:0x52
43:0x53
44:0x54
45:0x55
46:0x56
47:0x59
48:0x5A
49:0x5C
50:0x63
51:0x65
52:0x66
53:0x67
54:0x69
55:0x6A
56:0x6B
57:0x6C
58:0x6D
59:0x6E
60:0x71
61:0x72
62:0x73
63:0x74
64:0x75
65:0x76
66:0x79
67:0x7A
68:0x7C
69:0x80
70:0x81
71:0x82
72:0x84
73:0x88
74:0x8F
75:0x90
76:0x97
77:0x98
78:0x9B
79:0x9D
80:0x9E
81:0x9F
82:0xA3
83:0xA5
84:0xA6
85:0xA7
86:0xA9
87:0xAA
88:0xAB
89:0xAC
90:0xAD
91:0xAE
92:0xB1
93:0xB2
94:0xB3
95:0xB4
96:0xB5
97:0xB6
98:0xB9
99:0xBA
100:0xBC
101:0xC3
102:0xC5
103:0xC6
104:0xC7
105:0xC9
106:0xCA
107:0xCB
108:0xCC
109:0xCD
110:0xCE
111:0xD1
112:0xD2
113:0xD3
114:0xD4
115:0xD5
116:0xD6
117:0xD9
118:0xDA
119:0xDC
120:0xE0
121:0xE1
122:0xE2
123:0xE4
124:0xE8
125:0xEF
5:0x10
6:0x17
7:0x18
8:0x1B
9:0x1D
10:0x1E
11:0x1F
12:0x23
13:0x25
14:0x26
15:0x27
16:0x29
17:0x2A
18:0x2B
19:0x2C
20:0x2D
175
Download from Www.Somanuals.com. All Manuals Search And Download.
Addressing Methods and Table Structures
SCC (SCSI Controller Command) Addressing Method
When a router is configured to use SCSI Controller Command addressing (SCC)
and a command is received, the router either will respond as a controller device to
the FCP Initiator or will route the FCP request to a specified BUS:TARGET:LUN.
If a request using the Peripheral Device Addressing method is received (an FCP
command with the LUN field bits 7 and 6 of byte 0 set to 0), the router routes the
request to the internal processor, which acts on the command directly. If a request
using the Logical Unit Addressing method is received (bits 7 and 6 set to 00x10),
the request is routed to the BUS:TARGET:LUN as specified in the defined field
Host systems using SCC addressing will typically do initial device discovery
using the Peripheral Device Addressing method. On issuing an Inquiry command
to the router, the host will receive the router Inquiry data, indicating the device
type as a controller device (Inquiry data indicates device type is 0xC). The host
will then know that subsequent commands to router-attached devices will use the
Logical Unit Addressing method.
The host can perform discovery by either progressing through the
BUS:TARGET:LUN values, as would a standard SCSI driver, or by issuing a
Report LUNs command. This command is sent to the router (using the Peripheral
Device Addressing method). The router returns a table indicating the attached
devices. The host can then perform actions on these devices directly without
performing further discovery processing.
Auto Assigned Addressing Method
The Auto Assigned addressing method is created through SCSI device discovery
on power up or reset. As the router performs device discovery on the SCSI bus,
the index table FCP LUN values are filled with adjacent FCP LUN referencing
each subsequent SCSI device. The index table generated by the Auto Assigned
option cannot be manually edited.
When the Auto Assigned option is used, the host system will detect every attached
SCSI device without voids, allowing full device access to the host. This method
allows easy configuration in environments where SCSI device ordering is not
important and where hot plugging of SCSI devices will not occur. For example,
tape libraries are excellent candidates for using Auto Assigned Addressing.
Configuration options provide for the SCSI discovery to be performed in order of
bus, target, or LUN as desired for the specific environment.
176
Download from Www.Somanuals.com. All Manuals Search And Download.
Addressing Methods and Table Structures
Indexed Addressing Method
Indexed addressing allows for host bus adapter (HBA) drivers that use only
Peripheral Device Addressing to access SCSI devices attached to the router. This
addressing is done by use of a table, which is indexed by sequential LUN values,
indicating the selected BUS:TARGET:LUN devices. In this mode, it is not
possible to address the router as a controller unit directly.
The maximum size of the table is equal to the number of buses multiplied by the
number of targets per bus less one Initiator ID per bus, multiplied by the number
of LUNs per target. The index table can be manually edited. A method is also
provided to perform SCSI device discovery and fill the index table.
See Table 25 for the Indexed addressing table.
Table 25: Indexed Addressing Table
FCP LUN Value
SCSI BUS:TARGET:LUN
0
1
2
3
4
5
6
0:0:0
0:1:0
0:2:0
0:3:0
0:4:0
0:5:0
0:6:0
(0:7:0 occupied by Initiator ID)
7
0:8:0
(...)
(...)
13
14
15
16
17
(...)
0:14:0
0:15:0
1:0:0
1:1:0
1:2:0
(...)
177
Download from Www.Somanuals.com. All Manuals Search And Download.
Addressing Methods and Table Structures
178
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance
Notices
D
DE
Federal Communications Commission Notice
Part 15 of the Federal Communications Commission (FCC) Rules and
Regulations has established Radio Frequency (RF) emission limits to provide an
interference-free radio frequency spectrum. Many electronic devices, including
computers, generate RF energy incidental to their intended function and are,
therefore, covered by these rules. These rules place computers and related
peripheral devices into two classes, A and B, depending upon their intended
installation. Class A devices are those that may reasonably be expected to be
installed in a business or commercial environment. Class B devices are those that
may reasonably be expected to be installed in a residential environment (for
example, personal computers). The FCC requires devices in both classes to bear a
label indicating the interference potential of the device as well as additional
operating instructions for the user.
The rating label on the device shows the classification (A or B) of the equipment.
Class B devices have an FCC logo or FCC ID on the label. Class A devices do not
have an FCC logo or FCC ID on the label. After the Class of the device is
determined, refer to the corresponding statement in the following sections.
179
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance Notices
Class A Equipment
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at
personal expense.
Class B Equipment
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
■
■
■
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit that is different from that to
which the receiver is connected
■
Consult the dealer or an experienced radio or television technician for help
Designation Clarification
MSL libraries are Class A devices with the HP StorageWorks Network Storage Router
e1200-160 installed.
180
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance Notices
Declaration of Conformity for Products Marked with the FCC Logo,
United States Only
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
For questions regarding this FCC declaration, contact us by mail or telephone:
Hewlett-Packard Company
Network Storage Solutions - Automation Business Segment
Regulatory Engineering
825 14th Street S.W., Bldg. E, MS E200
Loveland, CO 80537
(970) 898-1738
To identify this product, refer to the part, series, or model number found on the
product.
181
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance Notices
Canadian Notice (Avis Canadien)
Class A Equipment
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.
Class B Equipment
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.
European Union Notice
Products with the CE Marking comply with both the EMC Directive
(89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the
Commission of the European Community.
Compliance with these directives implies conformity to the following European
Norms (the equivalent international standards are in parenthesis):
■
■
■
■
■
EN55022 (CISPR 22) – Electromagnetic Interference
EN55024 (IEC61000-4-2, 3, 4, 5, 6, 8, 11) – Electromagnetic Immunity
EN61000-3-2 (IEC61000-3-2) – Power Line Harmonics
EN61000-3-3 (IEC61000-3-3) – Power Line Flicker
EN60950 (IEC950) – Product Safety
182
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance Notices
BSMI Notice
Laser Device
All HP systems equipped with a laser device comply with safety standards,
including International Electrotechnical Commission (IEC) 825. With specific
regard to the laser, the equipment complies with laser product performance
standards set by government agencies as a Class 1 laser product. The product does
not emit hazardous light; the beam is totally enclosed during all modes of
customer operation and maintenance.
Laser Safety Warnings
WARNING: To reduce the risk of exposure to hazardous radiation:
■ Do not try to open the laser device enclosure. There are no user-serviceable
components inside.
■ Do not operate controls, make adjustments, or perform procedures to the
laser device other than those specified herein.
■ Allow only HP authorized service technicians to repair the laser device.
Compliance with CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and
Drug Administration implemented regulations for laser products on August 2,
1976. These regulations apply to laser products manufactured from August 1,
1976. Compliance is mandatory for products marketed in the United States.
184
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance Notices
Compliance with International Regulations
All HP systems equipped with laser devices comply with appropriate safety
standards including IEC 825.
Laser Product Label
A label is located on the surface of the HP supplied laser device.
Laser Information
Table 26: Laser Information
Feature
Description
Laser type
Semiconductor GaAIAs
Wave length
Divergence angle
Output power
Polarization
780 nm +/- 35 nm
53.5 degrees +/- 0.5 degrees
Less than 0.2 mW or 10,869 W m-2 sr-1
Circular 0.25
Numerical aperture
0.45 inches +/- 0.04 inches
185
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance Notices
186
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrostatic Discharge
E
EF
To avoid damaging equipment, be aware of the precautions you need to follow
when setting up the system or handling parts. A discharge of static electricity from
a finger or other conductor may damage system boards or other static-sensitive
devices. This type of damage may reduce the life expectancy of the device.
To prevent electrostatic damage, observe the following precautions:
■
■
■
Avoid hand contact by transporting and storing products in static-safe
containers.
Keep electrostatic-sensitive parts in their containers until they arrive at
static-free workstations.
Place parts on a grounded surface before removing them from their
containers.
■
■
Avoid touching pins, leads, or circuitry.
Always be properly grounded when touching a static-sensitive component or
assembly.
187
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrostatic Discharge
Grounding Methods
There are several methods for grounding. Use one or more of the following
methods when handling or installing electrostatic-sensitive parts:
■
Use a wrist strap connected by a ground cord to a grounded workstation or
computer chassis. Wrist straps are flexible straps with a minimum of
1 megohm ± 10 percent resistance in the ground cords. To provide proper
ground, wear the strap snug against the skin.
■
Use heel straps, toe straps, or boot straps at standing workstations. Wear the
straps on both feet when standing on conductive floors or dissipating floor
mats.
■
■
Use conductive field service tools.
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have a
HP authorized reseller install the part.
Note: For more information on static electricity, or assistance with product installation,
contact your HP authorized reseller.
188
Download from Www.Somanuals.com. All Manuals Search And Download.
index
A
C
Active Fabric configuration
Serial/Telnet UI 128
Visual Manager UI 50
addressing, defined 173
audience 10
clock configuration
Serial/Telnet UI 127
Visual Manager UI 52
configuration settings
backing up 147
authorized reseller, HP 15
auto-assigned addressing
described 176
common 29
auto-assigned maps, defined 32
restoring 148
troubleshooting 157
configurations, Fibre Channel to SCSI,
illustrated 20
controller LUN commands
general commands, listed 168
conventions
B
backing up the configuration, FTP UI 147
backup and restore, LAN-free, illustrated 23
baud rate configuration
Serial/Telnet UI 97
document 11
equipment symbols 12
text symbols 12
Visual Manager UI 46
buffered tape writes
Fibre Channel
conversion process, FCP to SCSI protocol,
illustrated 21
copying trace buffers, FTP UI 149
current map, default
Fibre Channel
Serial/Telnet UI 103
Visual Manager UI 58
overview of 33
SCSI
Serial/Telnet UI 107
Visual Manager UI 61
bus reset on boot
Serial/Telnet UI 103
Visual Manager UI 58
SCSI
overview of 29
Serial/Telnet UI 106
Visual Manager UI 61
Serial/Telnet UI 107
Visual Manager UI 62
D
date configuration
189
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Serial/Telnet UI 127
location of 19
event log
clearing
Serial/Telnet UI 139
Visual Manager UI 52
DB-9 pin assignments 164
DB-9 pin layout 164
DB-9 serial pin assignments, illustrated 164
default settings, Ethernet 26
default settings, router 26
devices
Visual Manager UI 85
configuration of
Serial/Telnet UI 127
Visual Manager UI 83
viewing
supported 20
troubleshooting 157
DHCP setup
Serial/Telnet UI 139
Visual Manager UI 84
external features, overview 18
Serial/Telnet UI 100
Visual Manager UI 49
discovery mode
F
Fibre Channel
factory settings, resetting
Serial/Telnet UI 129
Serial/Telnet UI 102
Visual Manager UI 57
overview of 30
Visual Manager UI 53
FCC notices
SCSI
Class A Equipment 180
Class B Equipment 180
classification label 179
Declaration of Conformity 181
FCP to SCSI protocol conversion process,
illustrated 21
Serial/Telnet UI 106
Visual Manager UI 61
document
conventions 11
prerequisites 10
related documentation 10
features of router, external 18
Fibre Channel
E
LED indicators 19
environmental requirements
operating 23
port configuration, overview 30
Fibre Channel connection, troubleshooting 156
Fibre Channel hosts
shipping and storing 24
equipment symbols 12
ESD (electrostatic discharge)
obtaining additional information 188
precautions 187
viewing and changing
Serial/Telnet UI 118
Visual Manager UI 68
Fibre Channel maps
preventing 187
adding entries
transporting products 187
Ethernet configuration
default settings 26
Serial/Telnet UI 114
Visual Manager UI 70
clearing entries
Serial/Telnet UI 99
Visual Manager UI 69
creating entries
Visual Manager UI 48
Ethernet port
Serial/Telnet UI 115
Visual Manager UI 70
LED indicators 19
190
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
deleting entries
firmware versions, upgrading
FTP UI 150
Serial/Telnet UI 118
Visual Manager UI 69
editing entries
Serial/Telnet UI 142
FTP UI
Serial/Telnet UI 112
Visual Manager 69
filling entries
Serial/Telnet UI 118
Visual Manager UI 69
removing gaps in
accessing 146
Visual Manager UI 77
configuration, backing up 147
configuration, restoring 148
firmware, upgrading 150
overview of the UI 28
tasks 145
Serial/Telnet UI 117
Visual Manager UI 69
viewing and changing
Serial/Telnet UI 110
Visual Manager UI 69
Fibre Channel port
buffered tape writes
Serial/Telnet UI 103
Visual Manager UI 58
configuration
trace buffers, copying 149
functional overview, of router 20
G
getting help 14
grounding methods 188
grounding, suggested equipment for 188
H
Serial/Telnet UI 101
Visual Manager UI 56
Configuration screen, illustrated 56
default map
Serial/Telnet UI 103
Visual Manager UI 58
discovery mode
Serial/Telnet UI 102
Visual Manager UI 57
override settings
Serial/Telnet UI 103
Visual Manager UI 59
performance mode
Visual Manager UI 59
port mode
HBA device driver, troubleshooting 158
heel straps, using 188
help, obtaining 14
host configuration, troubleshooting 158
host lists
adding to
Serial/Telnet UI 120
deleting from
Serial/Telnet UI 121
editing, Fibre Channel
Serial/Telnet UI 120
Visual Manager UI 68
editing, SCSI
Serial/Telnet UI 121
Visual Manager UI 71
selecting a host for the current map
Serial/Telnet UI 120
Visual Manager UI 66
hostname
Serial/Telnet UI 103
Visual Manager UI 57
port name
Serial/Telnet UI 102
Visual Manager UI 56
Fibre Channel to SCSI configurations, illustrated
Serial/Telnet UI 99
Visual Manager UI 47
191
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
HP
Library and Tape Tools, Getting support 162
Library and Tape Tools, Key features 160
Library and Tape Tools, Software features 160
link status, Fibre Channel
authorized reseller 15
storage website 14
technical support 14
Serial/Telnet UI 133
I
Visual Manager UI 56
LUN management
I/O configuration
Visual Manager UI 54
indexed addressing
described 177
overview 31
M
indexed maps, defined 32
initiator IDs, SCSI
Serial/Telnet UI 106
Visual Manager UI 60
interfaces
mapping tasks, Fibre Channel
adding entries
Serial/Telnet UI 114
Visual Manager 70
changing the name of the host
Visual Manager 68
clearing entries
Visual Manager 69
creating entries
user, listed 27
internal termination, SCSI
Visual Manager UI 61
IP address
Serial/Telnet UI 99
Visual Manager UI 49
IP gateway
Serial/Telnet UI 115
Visual Manager 70
default current map
Serial/Telnet UI 103
Visual Manager UI 58
deleting entries
Serial/Telnet UI 118
Visual Manager 69
filling entries
Serial/Telnet UI 99
Visual Manager UI 49
L
LAN-free backup and restore, illustrated 23
laser device
Serial/Telnet UI 118
Visual Manager 69
removing gaps in
product classification label 185
radiation warning 184
regulatory compliance notice 184
LED indicators
Serial/Telnet UI 117
Visual Manager 69
viewing and changing 108
Visual Manager UI 69
mapping tasks, Fibre Channel and SCSI
adding (creating) a map
Visual Manager UI 67
adding a host to the host list
Serial/Telnet UI 120
changing the name of
Serial/Telnet UI 112
defined 153
Ethernet port 19
Fibre Channel 19
power supply 19
SCSI bus 19
types of 153
Library and Tape Tools 160
Library and Tape Tools, Additional information
192
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
deleting (removing) the current map
Visual Manager UI 67
deleting a host from the host list
Serial/Telnet UI 121
Visual Manager UI 66
displaying the entire device list
Serial/Telnet UI 123
editing entries
Serial/Telnet UI 112
editing host information
Serial/Telnet UI 121
editing the current map
Serial/Telnet UI 111
editing the host list of the current map
Serial/Telnet UI 118
overview of
Serial/Telnet UI 118
Visual Manager UI 73
removing gaps in
Serial/Telnet UI 117
Visual Manager UI 73
viewing and changing 108
Visual Manager UI 72
maps
auto-assigned, defined 32
indexed, defined 32
overview 31
predefined maps 32
SCC, defined 32
troubleshooting 157
N
Visual Manager UI 65
selecting a host for the current map
Serial/Telnet UI 120
Visual Manager UI 66
selecting the current map
Serial/Telnet UI 109
Visual Manager UI 67
viewing and changing
Serial/Telnet UI 110
Visual Manager UI 66
mapping tasks, SCSI
adding entries
network configuration
Serial/Telnet UI 98
Visual Manager UI 47
O
override settings
Fibre Channel
Serial/Telnet UI 103
Visual Manager UI 59
SCSI
Serial/Telnet UI 107
Visual Manager UI 62
Serial/Telnet UI 115
Visual Manager UI 73
clearing entries
Visual Manager UI 73
creating entries
Serial/Telnet UI 116
Visual Manager UI 73
default current map
Serial/Telnet UI 107
Visual Manager UI 62
deleting entries
P
parts
proper handling 187
storing 187
performance mode, Fibre Channel
Visual Manager UI 59
pin assignments
DB-9 serial 164
RJ-45 Ethernet 165
pin layout
Serial/Telnet UI 118
Visual Manager UI 73
filling entries
DB-9 serial 164
RJ-45 Ethernet 165
193
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
port configuration
S
Serial/Telnet UI 101
SCC addressing, described 176
SCC maps, defined 32
SCSI bus
port mode, Fibre Channel
Serial/Telnet UI 103
Visual Manager UI 57
port name, Fibre Channel
Serial/Telnet UI 102
Visual Manager UI 56
power requirements, of router 24
power supply
LED indicators 19
power-up messages, illustrated 94
prerequisites 10
PRLI data, troubleshooting 159
process, converting Fibre Channel to SCSI,
illustrated 21
process, converting SCSI to Fibre Channel,
illustrated 22
buffered tape writes
Serial/Telnet UI 107
Visual Manager UI 61
bus reset on boot
Serial/Telnet UI 106
Visual Manager UI 61
configuration of
Serial/Telnet UI 105
Visual Manager UI 60
configuration overview 29
configuration, troubleshooting 155
default map
Serial/Telnet UI 107
Visual Manager UI 62
discovery settings
Serial/Telnet UI 106
Visual Manager UI 61
Initiator and Target settings
Serial/Telnet UI 106
Visual Manager UI 60
LED indicators 19
override settings 107
Visual Manager UI 62
termination mode
R
rack stability, warning 13
rebooting
Serial/Telnet UI 142
Visual Manager UI 87
regulatory compliance notices
Canadian 182
European Union 182
related documentation 10
report option
Visual Manager UI 61
SCSI devices, troubleshooting 157
SCSI hosts
Visual Manager UI 86
requirements of router, physical 23
resetting to factory settings
Serial/Telnet UI 129
viewing and changing
Serial/Telnet UI 118
Visual Manager UI 71
SCSI maps
Visual Manager UI 53
restoring the configuration, FTP UI 148
RJ-45 Ethernet pin assignments 165
RJ-45 Ethernet pin layout 165
RJ-45 Ethernet pin layout, illustrated 165
adding entries
Serial/Telnet UI 115
Visual Manager UI 73
clearing entries
Visual Manager UI 73
creating entries
194
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Serial/Telnet UI 116
Visual Manager UI 73
deleting entries
Serial/Telnet UI 118
Visual Manager UI 73
editing entries
Serial/Telnet UI 112
Visual Manager 72
filling entries
MAC address 99
subnet mask 99
event filter setting options, listed 127
event log
clearing 139
configuration of 126
viewing 139
event settings, configuration of 126
factory settings, resetting 129
Fibre Channel devices, viewing 135
Fibre Channel driver status information,
viewing 136
Serial/Telnet UI 118
Visual Manager UI 73
removing gaps in
Serial/Telnet UI 117
Visual Manager UI 73
viewing and changing
Serial/Telnet UI 110
Visual Manager UI 72
SCSI to Fibre Channel conversion process,
illustrated 22
security configuration
Serial/Telnet UI 100
Visual Manager UI 51
serial port
Fibre Channel link information, viewing 133
Fibre Channel port
buffered tape writes 103
configuration of 101
discovery mode 102
override settings 103
port mode 103
port name 102
Fibre Channel status information, viewing
main menu, described 95
mapping tasks, Fibre Channel
adding entries 114
location of 19
Serial UI, accessing 92
Serial/Telnet main menu, illustrated 95
Serial/Telnet UI
creating entries 115
deleting entries 118
filling entries in 118
accessing 92
removing gaps in 117
Active Fabric configuration 128
baud rate, changing 97
Configuration Menu, options, listed 96
DHCP setup 100
download new firmware option, described
mapping tasks, Fibre Channel and SCSI
adding a host to the host list 120
changing the name of the current map 112
deleting a host from the host list 121
displaying the entire device list 123
editing entries of the current map 112
editing host information 121
editing options, listed 112
editing the current map 111
editing the entries of the current map,
options, listed 113
editing host information on a Fibre Channel
port, illustrated 122
Ethernet configuration 98
DHCP 100
Ethernet mode 99
I/P address 99
editing the host list of the current map 118
I/P gateway 99
195
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
editing the host list of the current map, edit
options, listed 119
trace settings, configuring 125
Serial/Telnet UI Active Fabric Configuration
Menu, illustrated 128
Serial/Telnet UI adding a host to the host list -
FCP host, illustrated 121
initial access 108
listed 109
screen navigation 109
selecting the current map 109
selecting the host for the current map 120
viewing the current map 110
Serial/Telnet UI Baud Rate Configuration
screen, illustrated 97
Serial/Telnet UI Configuration Menu, illustrated
Serial/Telnet UI creating an entry for a SCSI
map, illustrated 117
Serial/Telnet UI creating an map entry for a
Fibre Channel map, illustrated 116
Serial/Telnet UI device list generated for a Fibre
Channel port, illustrated 114
Serial/Telnet UI Device Mapping Configuration
Menu, illustrated 108
Serial/Telnet UI Download New Firmware
Menu, illustrated 143
Serial/Telnet UI Edit Map Entries for a Fibre
Channel Map, illustrated 113
mapping tasks,SCSI
adding entries 115
creating map entries 116
deleting entries 118
filling entries 118
removing gaps in 117
overview of the UI 27
port configuration 101
reboot option, described 142
Reset and Save Configuration to Factory
defaults option, described 129
Restore Last Saved Configuration option,
described 129
Save Configuration option, described 128
SCSI attached devices 137
SCSI bus, configuration
Serial/Telnet UI Edit Map Entries for a SCSI
Map, illustrated 113
Serial/Telnet UI editing host information on a
SCSI bus, illustrated 123
Serial/Telnet UI entire device list, illustrated 124
Serial/Telnet UI event filter settings, illustrated
Serial/Telnet UI Event Log Menu, illustrated 139
Serial/Telnet UI FCP Current Map display,
illustrated 110
buffered tape writes 107
bus reset on boot 106
discovery settings 106
Initiator and Target settings 106
Target override settings 107
SCSI resource information 138
SCSI statistics 137
SCSI status information 137
SCSI Status Menu, options, listed 137
system statistics information, described 131
System Statistics Menu, options, listed 131
system status information 131
System Utilities Menu, options, listed 130
System Utility Menu, described 130
trace and event settings configuration,
described 124
Serial/Telnet UI Fibre Channel configuration
screen, illustrated 101
Serial/Telnet UI Fibre Channel Devices Display
page, illustrated 135
Serial/Telnet UI Fibre Channel Driver resource
status screen, illustrated 136
Serial/Telnet UI Fibre Channel link status
screen, illustrated 133
Serial/Telnet UI Fibre Channel Status Menu,
illustrated 132
trace buffers, saving copies 140
Trace Dump menu, described 140
196
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Serial/Telnet UI Fibre Channel Transport
Queues page, illustrated 136
Serial/Telnet UI host list display for Fibre
Channel maps, illustrated 119
Serial/Telnet UI host list display for SCSI maps,
illustrated 119
Serial/Telnet UI RealTime Clock Configuration
Menu, described 127
Serial/Telnet UI SCSI bus configuration menu,
illustrated 105
Serial/Telnet UI SCSI Current Map display,
illustrated 111
Serial/Telnet UI SCSI Device Display Menu,
illustrated 138
Serial/Telnet UI SCSI Resource Display screen,
illustrated 139
Serial/Telnet UI SCSI Status Menu, illustrated
Serial/Telnet UI Select Current Map screen,
illustrated 109
Serial/Telnet UI System Statistics Menu,
illustrated 131
Serial/Telnet UI System Status screen, illustrated
Serial/Telnet UI Trace Dump menu, illustrated
T
tables
peripheral device addressing 174
SCSI addressing sequence 174
SCSI logical unit addressing 174
target override settings
Serial/Telnet UI 107
Visual Manager 62
technical support, HP 14
Telnet UI, accessing 92
text symbols 12
tools
conductive field service type 188
traces
clearing buffers
Serial/Telnet UI 140
Visual Manager UI 82
configuration
Serial/Telnet UI 140
configuration of
Serial/Telnet UI 125
Visual Manager UI 79
copying buffers 149
viewing
Serial/Telnet UI 140
troubleshooting
Serial/Telnet UI trace settings menu, illustrated
basic steps, listed 155
devices, verifying 157
Fibre Channel connection, verifying 156
HBA device driver, verifying 158
host configuration, verifying 158
mapping, verifying 157
PRLI data, verifying 159
router configuration, verifying 157
SCSI bus configuration 155
SCSI devices, verifying 157
Serial/Telnet UI trace settings screen,
continued, illustrated 126
settings, common configuration 29
standby power button
location of 19
statistics information, viewing
Serial/Telnet UI 131
Visual Manager UI 74
subnet mask
Serial/Telnet UI 99
Visual Manager UI 49
U
symbols in text 12
upgrading the firmware
FTP UI 150
symbols on equipment 12
197
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Serial/Telnet UI 142
Active Fabric configuration 50
number of controller LUNs 50
options 50
baud rate configuration 46
best practices 40
clock configuration 52
discovery 64
user configuration
Serial/Telnet UI 100
Visual Manager UI 51
user interfaces, listed 27
utilities configuration
Serial/Telnet UI 130
Visual Manager UI 75
Ethernet configuration 48
DHCP 49
V
Ethernet mode 48
IP address 49
Visual Manager Clear Current Trace Buffer
screen, illustrated 82
Visual Manager Current traces screen,
illustrated 81
Visual Manager Discovery screen, illustrated 64
Visual Manager Ethernet Configuration dialog
box, illustrated 48
Visual Manager Event Log settings screen,
illustrated 83
Visual Manager FTP Utility screen, illustrated 77
Visual Manager Home page, illustrated 41
Visual Manager main menu, illustrated 41
Visual Manager Network screen, illustrated 47
Visual Manager Ports menu, illustrated 54
Visual Manager Reboot screen, illustrated 87
Visual Manager Report screen, illustrated 86
Visual Manager Reset to Factory Default screen,
illustrated 53
Visual Manager router image, illustrated 42
Visual Manager SCSI bus configuration screen,
illustrated 60
Visual Manager SCSI Host Name dialog box,
illustrated 71
IP gateway 49
subnet mask 49
event log
clearing 85
configuration 83
display 84
factory settings, resetting 53
Fibre Channel
buffered tape writes 58
configuration of 56
default map 58
discovery mode 57
hard AL_PA 57
link status 56
override settings 59
performance mode 59
port mode 57
port name 56
Fibre Channel hosts, viewing and changing
FTP access 77
home page 41
host name, changing 47
I/O configuration 54
main menu 41
mapping tasks 65
overview of 65
mapping tasks, Fibre Channel
adding entries 70
clearing maps 69
creating entries 70
Visual Manager SCSI Map dialog box,
illustrated 72
Visual Manager Serial screen, illustrated 46
Visual Manager Statistics menu, illustrated 74
Visual Manager System Menu, illustrated 44
Visual Manager Trace Settings screen,
illustrated 79
Visual Manager UI
accessing 38
198
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
deleting entries 69
filling maps 69
removing gaps in 69
viewing and changing 69
mapping tasks, Fibre Channel and SCSI
adding a new map 67
deleting a host 66
deleting a map 67
selecting a host 66
selecting a map 67
mapping tasks, SCSI
adding entries 73
discovery mode 61
initiator IDs 60
internal termination 61
override settings 62
settings 60
Target IDs 60
SCSI hosts
viewing and changing 71
serial configuration 46
statistics information,viewing 74
System Menu 44
traces
clearing map entries 73
creating entries 73
clearing buffers 82
configuration 79
deleting entries 73
filling maps 73
user configuration 51
utilities configuration 75
options 75
removing gaps in 73
viewing and changing 72
network configuration 47
Network Menu options, listed 47
overview of the UI 27
reboot option 87
Visual Manager Utilities menu, illustrated 75
W
warning
report options 86
resetting to factory settings 53
SCSI
rack stability 13
symbols on equipment 12
websites
buffered tape writes 61
bus reset on boot 61
configuration of 60
default map 62
HP storage 14
wrist straps
using 188
199
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
200
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Graco Baby Accessories PD167532A User Manual
Graco Inc Pressure Washer 1840 User Manual
Graco Marine Heating System 309525G User Manual
Grandstream Networks IP Phone GXP1100 1105 User Manual
Greenheck Fan Ventilation Hood DFD Series User Manual
Greenheck Fan Ventilation Hood KFD Series User Manual
Groupe SEB USA T FAL Iron PRO EXPRESS User Manual
GTO Safety Gate RB923 rev User Manual
Havis Shields Automobile Parts C VS 1100 F150 User Manual
Hunter Fan Fan 22561 User Manual