Grandstream Networks, Inc.
GXP1100/1105 Small Business IP Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
GUI INTERFACE EXAMPLES
GXP1100/1105 USER MANUAL
1. Screenshot of Configuration Login Page
2. Screenshot of Status Page
3. Screenshot of Basic Setting Configuration Page
4. Screenshot of Advanced User Configuration Page
5. Screenshot of SIP Account Configuration Page
6. Screenshot of Saved Configuration Changes Page
7. Screenshot of Reboot Page
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 2 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
GXP1100/1105 is a next generation small business IP phone that features up to 2 call appearances with
1 SIP account, 4 programmable keys, single network port, integrated PoE (GXP1105 only). The
GXP1100/1105 delivers superior HD audio quality, leading edge telephony features, automated
provisioning for easy deployment, advanced security protection for privacy, and broad interoperability with
most 3rd party SIP devices and leading SIP/NGN/IMS platforms. It is a perfect choice for small business,
lobby, and hotel applications looking for a high quality, basic IP phone with attractive cost.
Caution: Changes or modifications to this product not expressly approved by Grandstream, or operation
of this product in any way other than as detailed by this User Manual, could void your manufacturer
warranty.
Warning: Please do not use a different power adaptor with the GXP1100/1105 as it may cause damage
to the products and void the manufacturer warranty.
Note:
•
•
This document is subject to change without notice.
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print,
for any purpose without the express written permission is not permitted.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 3 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
EQUIPMENT PACKAGING
Table 1: Equipment Packaging
GXP1100/1105
Main Case
Yes
Handset
Yes
Phone Cord
Power Adaptor
Ethernet Cable
Base Stand
Yes
Yes (GXP1100 only)
Yes
Yes
Yes
Quick Start Guide
CONNECTING YOUR PHONE
The connectors of the GXP1100/1105 are located on the bottom of the device.
Table 2: GXP1100/1105 Connectors
LAN
10/100Mbps RJ-45 port for LAN (uplink) connection, integrated PoE (GXP1105 only)
5V DC power port; UL Certified
RJ9
Power Jack
Handset Jack
SAFETY COMPLIANCES
The GXP1100/1105 phone complies with FCC/CE and various safety standards. The GXP1100/1105 power
adaptor is compliant with the UL standard. Please use the universal power adaptor provided with the
GXP1100/1105 package only. The manufacturer’s warranty does not cover damages to the phone caused by
unsupported power adaptors.
WARRANTY
If you purchased your GXP1100/1105 from a reseller, please contact the company where you purchased
your phone for replacement, repair or refund. If you purchased the product directly from Grandstream,
contact your Grandstream Sales and Service Representative for a RMA (Return Materials Authorization)
number before you return the product. Grandstream reserves the right to remedy warranty policy without
prior notification.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 4 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
Table 3: GXP1100/1105 Feature Guide
Features
GXP1100/1105
Table 4: GXP1100/1105 Key Features in a Glance
Features
Benefits
Table 5: GXP1100/1105 Hardware Specifications
GXP1100/1105
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 5 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit weight: 0.6KG
Weight
Package weight: 1.0KG (GXP1100), 0.9KG (GXP1105)
Table 6: GXP1100/1105 Technical Specifications
Lines
2 call appearance with 1 SIP account
Advanced Digital Signal Processing (DSP)
Dynamic negotiation of codec and voice payload length
Support for G.723,1 (5.3/6.3K), G.729A/B, G.711 a/µ-law, G.726-32,
G.722 (wide-band), and iLBC codecs
In-band and out-of-band DTMF (in audio, RFC2833, SIP INFO)
Silence Suppression, VAD (voice activity detection), CNG (comfort noise
generation), ANG (automatic gain control)
Acoustic Echo Cancellation (AEC) with Acoustic Gain Control (AGC) for
speakerphone mode, Support side tone
Adaptive jitter buffer control (patent-pending) and packet delay and loss
concealment
HD audio handset with HD wideband audio codecs for excellent double-
talk performance
Voicemail indicator, downloadable custom ring-tones, call hold, call
transfer (attended/blind), call forward, call waiting, mute, redial, caller ID
display or block and volume control
Dial plan prefix, dial-plan support, off-hook auto dial and speed dial
Support NAT traversal using IETF STUN and Symmetric RTP
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Firmware version: 1.0.1.80
Page 6 of 29
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Support for IEEE 802.1p/Q tagging (VLAN), Layer 3 QoS
User specific URL for configuration file and firmware files
Mass provisioning using TR-069 or encrypted XML configuration file
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Firmware version: 1.0.1.80
Page 7 of 29
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the GXP1100/1105
GETTING FAMILIAR WITH THE KEYPAD
Table 7: GXP1100/1105 Keypad Buttons
Key Button
Key Button Definitions
Place active call on hold
Call waiting: bring up a new line or answer the second incoming call
Transfer an active call to another number
Enter to retrieve voice mails or other messages
Programmable hard key. It can be used for Multiple Purpose Key: Speed dial, Dial DTMF
or Call Return
Mute an active call
Dial out the number and can be used as SEND or REDIAL
Adjust volume by pressing “– “or “+”
0 - 9, *, #
Standard phone keypad; press # key to send call; press *** key to for IVR functions
MAKING PHONE CALLS
2 Call Appearance with 1 SIP Account
GXP1100/1105 can support up to two lines “virtually” mapped to a SIP account. By picking up the handset,
the GXP1100/1105 will be in off-hook state and the dial tone will be heard. To make a call, dial out the
number with the current line. During the call, users can press the FLASH button to hold the current call and
make/answer another call. Users can switch the two lines by pressing the FLASH button.
Completing Calls
The GXP1100/1105 allows you to make phone calls by picking up the handset. There are four ways to
complete calls.
1. DIAL: To make a phone call.
•
•
•
•
Take handset off hook
The line will have a dial tone
Enter the phone number
Press “#” or SEND button to send
2. REDIAL: To redial the last dialed phone number.
Take handset off-hook
•
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 8 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Press the SEND key.
3. VIA SPEED DIAL: On the GXP1100/1105, the Multiple Purpose Key (programmable hard key) has to
be configured as Speed Dial and with the correct name and user ID under Web GUI->Basic Settings
configuration.
•
•
Take handset off hook
Press the configured Speed Dial key
4. VIA CALL RETURN: On the GXP1100/1105, the Multiple Purpose Key (programmable hard key) has to
be configured as Call Return under Web GUI->Basic Settings configuration. No user name and user
ID has to be set on the Multiple Purpose Key for Call Return. After pressing the Call Return key, the
last answered number will be dialed out.
•
•
Take handset off hook
Press the configured Call Return key
NOTE:
1. Dial tone occurs after the handset is off-hook. After dialing the number, the phone waits 4 seconds (by
default; No key Entry Timeout) before sending and initiating the call. Press “#” button to override the 4
second delay.
2. If there are digits pressed, the SEND key will work as SEND instead of REDIAL.
Making Calls using IP Addresses
Direct IP Call allows two phones to talk to each other in an ad-hoc fashion without a SIP proxy. VoIP calls
can be made between two phones if:
•
•
•
Both phones have public IP addresses, or
Both phones are on a same LAN/VPN using private or public IP addresses, or
Both phones can be connected through a router using public or private IP addresses (with necessary
port forwarding or DMZ)
To make a direct IP call, please follow these steps:
•
•
•
•
•
Take handset off
After hearing the dial tone, press “***” to enter the IVR menu
Enter “47” for Direct IP Call. After hearing “Direct IP Calling”, the dial tone will be heard again
Enter the target IP address. (Please see example below)
Wait for about 4 seconds and the phone will initiate the call
For example: If the target IP address is 192.168.1.60 and the port is 5062 (e.g. 192.168.1.60:5062), input
the following: 192*168*1*60#5062. The “*” key represents the dot “.”; the “#” key represents colon “:”. Wait
for about 4 seconds and the phone will initiate the call.
The GXP1100/1105 also supports Quick IP Call mode. This enables the phone to make direct IP-calls, using
only the last few digits (last octet) of the target phone’s IP-number. This is possible only if both phones are in
under the same LAN/VPN. This simulates a PBX function using the CMSA/CD without a SIP server.
Controlled static IP usage is recommended.
To enable Quick IP calls, the phone has to be setup first. This is done through the web-setup function. In the
“Advanced Settings” page, set the "Use Quick IP-call mode” to “Yes”. Then take the handset offhook and dial
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 9 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
#xxx where x is 0-9 and xxx <=255. A direct IP call to aaa.bbb.ccc.XXX will be completed. “aaa.bbb.ccc” is
from the local IP address regardless of subnet mask. The numbers #xx or #x are also valid. The leading 0 is
not required (but OK).
For example:
192.168.0.2 calling 192.168.0.3 -- dial #3 followed by #
192.168.0.2 calling 192.168.0.23 -- dial #23 followed by #
192.168.0.2 calling 192.168.0.123 -- dial #123 followed by #
192.168.0.2: dial #3 and #03 and #003 results in the same call -- call 192.168.0.3
NOTE:
1. The “#” will represent colon “:” in Direct IP Call instead of Send key as in normal phone call
2. If you have a SIP Server configured, a Direct IP-IP still works. If you are using STUN, the Direct IP-IP call
will also use STUN. Configure the “Use Random Port” to “No” when completing Direct IP calls.
ANSWERING PHONE CALLS
Receiving Calls
1. Incoming single call: Phone rings with selected ring-tone. Answer call by taking Handset off hook.
2. Incoming multiple calls: When another call comes in while having an active call, the phone will
produce a Call Waiting tone (stutter tone). Answer the incoming call by pressing the FLASH button.
The current active call will be put on hold.
PHONE FUNCTIONS DURING A PHONE CALL
Call Waiting/Call Hold
1. Hold: Place a call on hold by pressing the HOLD button.
2. Resume: Press the HOLD button again to resume.
3. Multiple Calls: Automatically place ACTIVE call on hold or switch between two calls by pressing the
FLASH button. Call Waiting tone (stutter tone) will be audible when line is in use.
Mute
Press the MUTE button to mute/unmute the microphone.
Call Transfer
GXP1100/1105 supports Blind transfer, Attended transfer and Auto-Attended transfer:
1. Blind Transfer: During the call, press TRAN button, then dial the number and press the # button to
complete transfer of active call.
2. Attended Transfer: During the call, press “FLASH” button to make another call and automatically
place the ACTIVE LINE on HOLD. Once the second call is established, press TRAN key then the
FLASH button to transfer the call. Hang up the phone call after the call is transferred.
3. Auto-Attended Transfer: Users need to enable Auto-Attended Transfer under web GUI->Advanced
Settings Page first. During the call, press TRAN button. It will bring up another line and automatically
place the ACTIVE CALL on HOLD. Enter the number and press SEND key to establish the second
call. Once the second call is established, press TRAN button again and the call will be transferred.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 10 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: To transfer calls across SIP domains, SIP service providers must support transfer across SIP
domains.
Voice Messages (Message Waiting Indicator)
A blinking red MWI (Message Waiting Indicator) indicates a message is waiting. Dial into the voicemail box to
retrieve the message by entering the voice mail number of the server or pressing the MSG button (Voice Mail
User ID has to be properly configured as the voice mail number under web GUI->Account 1). An IVR will
prompt the user through the process of message retrieval.
Users can press “***” to the IVR menu and then enter “86” to hear the number of new voice
NOTE:
messages.
CALL FEATURES
The GXP1100/1105 supports traditional and advanced telephony features including caller ID, caller ID
w/name, call forward/transfer and etc.
Table 8: GXP1100/1105 Call Features
Key
*30
*31
*67
*82
*70
*71
*72
Call Features
Block Caller ID (for all subsequent calls)
Send Caller ID (for all subsequent calls)
Block Caller ID (per call)
Send Caller ID (per call)
Disable Call Waiting (per Call)
Enable Call Waiting (per Call)
Unconditional Call Forward
Dial “*72” and the forwarding number followed by “#”. Wait for the call to hang up
*73
*90
*91
*92
*93
Cancel Unconditional Call Forward
Dial “*73” and wait for the call to hang up
Busy Call Forward
Dial “*90” and the forwarding number followed by “#”. Wait for the call to hang up
Cancel Busy Call Forward
Dial “*91” and wait for the call to hang up
Delayed Call Forward
Dial “*92” and the forwarding number followed by “#”. Wait for the call to hang up
Cancel Delayed Call Forward
Dial “*93” and wait for the call to hang up
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 11 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Guide
The GXP1100/1105 can be configured in two ways. Firstly, using the IVR MENU by the keypad on the phone;
secondly, through embedded web configuration menu.
CONFIGURATION VIA IVR MENU
GXP1100/1105 has a built-in voice prompt menu for simple device configuration. Pick up the handset and dial
“***” to use the IVR menu.
Table 9: GXP1100/1105 IVR Menu Definitions
Menu
Voice Prompt
Options
Press “*” for the next menu option.
Press “#” to return to the main menu.
Main Menu
“Enter a Menu Option”
Enter 01 – 05, 07,10 - 17, 47, 86 or 99 Menu option.
01
“DHCP Mode”
“PPPoE Mode ”
“Static IP Mode”
Enter “9” to toggle the selection.
If users select “Static IP Mode”, users need configure all the
IP address information through menu 02 to 05 as below.
If users select “Dynamic IP Mode”, the device will retrieve all
IP address information from DHCP server automatically after
user reboots the device.
02
“IP Address “ + IP address
The current WAN IP address is announced.
Enter 12-digit new IP address if in Static IP Mode.
03
04
05
07
“Subnet “ + IP address
“Gateway “ + IP address
“DNS Server “ + IP address
“Preferred Vocoder”
Same as Menu option 02.
Same as Menu option 02.
Same as Menu option 02.
Enter “9” to go to the next selection in the list:
•
•
•
•
•
•
PCM U
PCM A
iLBC
G-726
G-723
G-729
10
13
“MAC Address”
Announces the Mac address of the unit.
“Firmware Server IP Address”
Announces current Firmware Server IP address. Enter 12 digit
new IP address.
14
15
“Configuration Server IP Address”
“Upgrade Protocol”
Announces current Config Server Path IP address. Enter 12
digit new IP address.
Upgrade Protocol for firmware and configuration update. Enter
“9” to toggle between HTTP, TFTP and HTTPS.
16
17
“Firmware Version”
“Firmware Upgrade”
Firmware version information.
Firmware upgrade mode. Enter “9” to toggle among the
following three options:
1. always check
2. check when pre/suffix changes
3. never upgrade
47
“Direct IP Calling”
Enter the target IP address to make a direct IP call, after dial
tone. (See Make a Direct IP Call section.)
86
99
“Voice Mail”
“RESET”
Announces number of voice mails.
Press “9” to reboot the device.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 12 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Enter MAC address to restore factory default setting.
(See Restore Factory Default Setting section)
“Invalid Entry”
Automatically returns to Main Menu
CONFIGURATION VIA WEB BROWSER
The GXP1100/1105 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded
HTML pages allow a user to configure the IP phone through a Web browser such as Microsoft’s IE, Mozilla
Firefox and Google Chrome.
Access the Web Configuration Menu
To access the phone’s Web Configuration Menu
•
•
Connect the computer to the same network as the phone1
Make sure the phone is turned on and wait until the indicator on the top right corner turns from RED
to OFF.
•
•
•
•
Take the handset off hook. Enter “***” and then press “02” to hear the IP address.
Start a Web browser on your computer
Enter the phone’s IP address in the address bar of the browser2
Enter the administrator’s password to access the Web Configuration Menu3
1
2
The Web-enabled computer has to be connected to the same sub-network as the phone. This can easily
be done by connecting the computer to the same hub or switch as the phone is connected to.
If the phone is properly connected to a working Internet connection and dynamic IP mode is selected under
IVR menu option “01”, the phone will get an IP address automatically and the IP address will be
announced under IVR menu option “02”. This address has the format: xxx.xxx.xxx.xxx, where xxx stands
for a number from 0 to 255. You will need this number to access the Web Configuration Menu. For
browser.
3
The default administrator password is “admin”; the default end-user password is “123”.
NOTE: When changing any settings, always SUBMIT them by pressing “UPDATE” button on the bottom of
the page. Reboot the phone to have the changes take effect. If, after having submitted some changes, more
settings have to be changed, press the menu option needed.
Definitions
This section will describe the options in the Web configuration user interface. As mentioned, a user can log in
as an administrator or end-user.
Functions available for the end-user are:
•
Status: Displays the network status, account status, software version and MAC address of the
phone, and service status.
•
Basic Settings: Basic preferences such as network settings, time settings, multi-purpose keys and
etc can be set up here.
Additional functions available to administrators are:
•
•
Advanced Settings: To set advanced network settings, codec settings, language settings and etc.
Account: To configure the SIP account.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 13 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 10: Device Configuration - Status
MAC Address
IP Address
The device ID, in HEXADECIMAL format.
This field shows IP address of GXP1100/1105.
This field contains the product model information.
This field contains the product part number.
Product Model
Part Number
Software Version
• Program: This is the main firmware release number, which is always used for
identifying the software (or firmware) system of the phone.
• Boot: Booting code version number
• Core: Core code version number
• Base: Base code version number
• DSP: DSP code version number
• Aux: Aux code version number
System Up Time
System Time
Registered
This field shows system up time since the last reboot.
This field shows the current time on the phone system.
Indicates whether accounts are registered to the related SIP server.
Indicates whether the PPPoE connection is enabled (connected to a modem).
PPPoE Link Up
Service Status
• GUI: shows the GUI status - running or stopped
• Phone: shows the phone status - running or stopped
Core Dump
Download core dump file for troubleshooting when necessary.
Table 11: Device Configuration – Settings/Basic Settings
End User Password
IP Address
This contains the password to access the Web Configuration Menu. This field is case
sensitive with a maximum length of 25 characters.
The GXP1100/1105 operates in two modes:
1. DHCP mode: all the field values for the Static IP mode are not used (even
though they are still saved in the Flash memory.) The GXP1100/1105
acquires its IP address from the first DHCP server it discovers on its LAN.
The DHCP option is reserved for NAT router mode. To use the PPPoE
feature, set the PPPoE account settings. The GXP1100/1105 establishes a
PPPoE session if any of the PPPoE fields is set.
2. PPPoE mode: configure all of the following fields: PPPoE account ID,
PPPoE password and PPPoE service name.
3. Static IP mode: configure all of the following fields: IP address, Subnet
Mask, Default Router IP address, DNS Server 1 (primary), DNS Server 2
(secondary). These fields are set to zero by default.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 14 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
802.1x Mode
This option allows the user to enable/disable 802.1x mode on the phone. The default
value is disabled. To enable 802.1x mode, this field should be set to EAP-MD5.
Once enabled, the user would be required to enter the following information below to
be authenticated on the network:
•
•
Identity
MD5 Password
Multi Purpose Key X
These options are used to assign a function to the corresponding multiple purpose
key. Options available are:
1. Speed Dial
2. Dial DTMF
3. Call Return – Call the last answered number
Time Zone
This parameter controls the date/time display according to the specified time zone.
If “Allow DHCP Option 2 to override Time Zone setting” is checked, the time zone will
be overridden by the DHCP server.
Self-Defined Time
Zone
This parameter allows the users to define their own time zone.
The syntax is: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5,M3.2.0,M11.1.0
MTZ+6MDT+5,
This indicates a time zone with 6 hours offset with 1 hour ahead which is U.S central
time. If it is positive (+) if the local time zone is west of the Prime Meridian (A.K.A:
International or Greenwich Meridian) and negative (-) if it is east.
M3.2.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd
Tuesday…)
The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon, Tues,..,Sat)
Therefore, this example is the DST which starts from the second Sunday of March to
the 1st Sunday of November.
Table 12: Device Configuration – Settings /Advanced Settings
Admin
Administrator password. Only the administrator can access the “Advanced Settings”
Password
and “Account Settings” page. Password field is purposely blank for security reasons
after clicking update and saved. The maximum password length is 25 characters.
Layer 3 QoS
Layer 2 QoS
Local RTP port
This field defines the layer 3 QoS parameter. It is the value used for IP Precedence
or Diff-Serv or MPLS. Default value is 12.
This contains the value used for layer 2 802.1Q/VLAN tag and 802.1p priority value.
Default setting is 0.
This parameter defines the local RTP port pair used to listen and transmit. It is the
base RTP port for channel 0. When configured, channel 0 will use this port _value
for RTP; channel 1 will use port_value+2 for RTP. Local RTP port ranges from 1024
to 65400 and must be even. The default value is 5004.
Use Random Port
This parameter, when set to “Yes”, will force random generation of both the local
SIP and RTP ports. This is usually necessary when multiple GXPs are behind the
same NAT. Default is “No”.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 15 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep-alive interval
This parameter specifies how often the GXP1100/1105 sends a blank UDP packet
to the SIP server in order to keep the “hole” on the NAT open. Default is 20
seconds.
Use NAT IP
NAT IP address used in SIP/SDP message. Default is blank.
STUN Server
IP address or Domain name of the STUN server. STUN resolution result will display
in the STATUS page of the Web UI.
Firmware Upgrade and
Provisioning
Allows the user to select the following options for firmware upgrade:
•
•
•
Always Check for New Firmware
Check New Firmware only when F/W pre/suffix changes
Always Skip the Firmware Check.
Firmware upgrade may take up to 10 minutes depending on network environment.
Do not interrupt the firmware upgrading process.
Note: Grandstream strongly recommends that the user upgrade firmware
locally in a LAN environment if using TFTP to upgrade. Please DO NOT
interrupt the upgrade process (especially the power supply) as this will
damage the device.
XML Config File
Password
The password used for encrypting the XML configuration file using OpenSSL. This
is required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS User Name The user name for the HTTP/HTTPS server.
HTTP/HTTPS Password The password for the HTTP/HTTPS server.
Upgrade Via
This field allows the user to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Firmware Server Path
Defines the server path for the firmware server. It can be different from the
Configuration server which is used for provisioning.
Config Server Path
Defines the server path for provisioning; it can be different from the firmware server.
Firmware File
Prefix/Postfix
Default is blank. If configured, GXP1100/1105 will request the firmware file with the
prefix/postfix and only the firmware with the matching encrypted prefix will be
downloaded and flashed into the phone.
This setting is useful for ITSPs. End user should keep it blank.
Config File
Prefix/Postfix
Default is blank. If configured, GXP1100/1105 will request the config file with the
prefix/postfix and only the file with the matching encrypted prefix will be downloaded
and flashed into the phone.
This setting is useful for ITSPs. End user should keep it blank.
Allow DHCP Option 43
and Option 66 to
override server
Default is “Yes”. This allows device gets provisioned from the server automatically.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 16 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Upgrade
This function is used by ITSP. End user should NOT touch these parameters.
Default is “No”. Choose “Yes” to enable automatic HTTP upgrade and provisioning.
In “Check for upgrade every” field, enter the number of minutes to check the HTTP
server for firmware upgrade or configuration changes. When set to “No”, the phone
will only perform HTTP upgrade and configuration check once at boot up.
Authenticate Conf File
Default is “No”. If set to “Yes”, configuration file would be authenticated before
acceptance. End user should use default setting.
Enable TR-069
Default is “No”.
ACS URL
URL for TR-069 Auto Configuration Servers (ACS).
Enter username for TR-069.
TR-069 Username
TR-069 Password
Periodic Inform Enable
Enter password for TR-069.
Enable periodic inform. Default is “No”.
Periodic Inform Interval When enabling periodic inform, set up the periodic inform interval.
Connection Request
Username
Enter the connection request username.
Connection Request
Password
Enter the connection request password.
Authentication Method
Select the authentication method among “No authentication”, “Basic” or Digest.
Enter the connection request port.
Connection Request
Port
Offhook Auto Dial
To configure a User ID/extension to dial automatically when the phone is taken
offhook.
Syslog Server
The IP address or URL of System log server. This feature is especially useful for
ITSPs.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 17 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Syslog Level
Select the ATA to report the log level. Default is NONE. The level is one of DEBUG,
INFO, WARNING or ERROR. Syslog messages are sent based on the following
events:
•
•
•
•
•
•
•
•
•
•
product model/version on boot up (INFO level)
NAT related info (INFO level)
sent or received SIP message (DEBUG level)
SIP message summary (INFO level)
inbound and outbound calls (INFO level)
registration status change (INFO level)
negotiated codec (INFO level)
Ethernet link up (INFO level)
SLIC chip exception (WARNING and ERROR levels)
memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains
the following components: GS_LOG: [device MAC address][error code] error
message.
For example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000].
Ethernet link is up.
Send SIP Log
NTP server
When setting the “Yes”, phone will send out SIP Log to syslog server. Default
setting is “No”.
This parameter defines the URI or IP address of the NTP (Network Time Protocol)
serve. It is used to display the current date/time.
Allow DHCP Option 42
to override NTP server
Default is “Yes”. This allows device gets provisioned for DHCP Option 42 from the
server automatically.
SSL Certificate
SSL Private Key
This defines the SSL certificate needed to access certain websites.
This defines the SSL Private key.
SSL Private Key
Password
This defines the SSL private key password.
Distinctive Ring Tone
Caller ID must be configured. Select a Distinctive Ring Tone 1 through 3 for a
particular Caller ID. The GXP1100/1105 will ONLY use selected ring tones for
particular Caller IDs. For all other calls, the GXP1100/1105 will use System Ring
Tone. When selected and no Caller ID is configured, the selected ring tone will be
used for all incoming calls.
System Ring Tone
System ring tone. Default is North American standard.
Adjust system ring tone frequencies and cadences based on local telecom
standard.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 18 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Progress Tones
Using these settings, users can configure ring or tone frequencies based on
parameters from local telecom. By default, they are set to North American standard.
Frequencies should be configured with known values to avoid uncomfortable high
pitch sounds.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing (“On time” in ‘ms’) while OFF is the period of silence. In
order to set a continuous ring, OFF should be zero. Otherwise it will ring ON ms
and a pause of OFF ms and then repeat the pattern. Up to three cadences are
supported.
Disable Call Waiting
Default is “No”. If set to “Yes”, the call waiting feature will be disabled.
Default is “No”. If set to “Yes”, the call waiting tone will be disabled.
Disable Call
Waiting Tone
Disable Direct IP Calls
Default is “No”. If set to “Yes”, direct IP calls will be disabled.
Use Quick IP Call Mode Dial an IP address under the same LAN/VPN segment by entering the last octet in
the IP address.
In the Advanced Settings page there is an option “Use Quick IP-call mode”. Default
setting is “No”. When set to “Yes”, and #XXX is dialed, where X is 0-9 and XXX
<=255, phone will make direct IP call to aaa.bbb.ccc.XXX where aaa.bbb.ccc
comes from the local IP address REGARDLESS of subnet mask.
#XX or #X are also valid so leading 0 is not required (but OK). See Quick IP Call
Mode for details.
Disable Transfer
Default is “No”. If set to “Yes”, transfer will be disabled.
Auto-Attended Transfer Default is “No”. If set to “Yes”, the phone will use attended transfer by default.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 19 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Language
Allows user to choose preferred display language in web UI and key pad UI
Currently, the phone supports these languages: English, Simplified Chinese,
Traditional Chinese, Korean, Japanese, Italian, Spanish, French, German,
Portuguese, Russian, Croatian, Hungarian, Polish, Slovenian, Arabic, Hebrew and
Dutch.
Note: The “Automatic” setting in language refers to Grandstream’s IP2Location
client which when connected to Internet would attempt to lookup a database
(driven by Grandstream) with the IP address for its geographical location.
Language file postfix allows the language file to have different postfixes so the
phone can request a particular file. It will append an underscore "_" plus the string
in the language file postfix.
The default language file name is "gxp.txt". If the field “Language File postfix “has
"NL" string in it, then the phone will request "gxp_NL.txt" instead of "gxp.txt".
User can only load one secondary language.
Supported downloadable language: Czech, Dutch, Estonian, French, German,
Italian, Polish, Portuguese, Slovak, Slovenian and Spanish.
How to set up Download Language:
This is similar to updating firmware in your local network environment.
1. Get the language file gxp.txt ready. Make sure the file is using UTF-8 encoding.
2. Copy gxp.txt to the firmware server directory using your local TFTP or HTTP
server.
3. Access the advanced settings of the Web GUI, set “Display Language” to
“Download Language” and enter the server path in Firmware Server Path. Select
TFTP or HTTP for firmware upgrade.
4. Update and reboot the phone.
Table 13: SIP Account Settings
Account Name
SIP Server
The name associated with each account - displayed on LCD.
SIP Server’s IP address or Domain name provided by VoIP service provider.
This field allows administrator to configure a backup SIP Server.
Secondary SIP Server
Outbound Proxy
IP address or Domain name of Outbound Proxy, Media Gateway, or Session Border
Controller. Used for firewall or NAT penetration in different network environment. If
the system detects symmetric NAT, STUN will not work. ONLY outbound proxy can
provide solution for symmetric NAT.
SIP User ID
User account information provided by VoIP service provider (ITSP); either an actual
phone number or formatted like one.
Authenticate ID
SIP service subscriber’s Authenticate ID used for authentication. It can be identical
to or different from SIP User ID.
Authenticate Password SIP service subscriber’s account password for GXP1100/1105 to register to (SIP)
servers of ITSP.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 20 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
SIP service subscriber’s name that is used for Caller ID display.
DNS Mode
The default is set to A Record. If user wishes to locate the server by DNS SRV,
the user may select SRV or NATPTR/SRV. When "Use Configured IP" option is
selected, if SIP server is configured as domain name, phone will not send DNS
query, but use "Primary IP" or "Secondary IP" to send sip message if at least one
of them are not empty.
Primary IP
This option applies only if “Use Configured IP” is selected, the phone will send DNS
query to the Primary IP. Insert IP address here.
Backup IP 1
Backup IP 2
TEL URL
Insert the first back up IP here.
Insert the second back up IP here.
Select Tel URI as “Disabled”, “User=Phone” or “Enabled”. Default is “Disabled”.
SIP Registration
This parameter controls sending REGISTER messages to the proxy server. The
default setting is “Yes”.
Unregister on Reboot
Register Expiration
Default is “No”. If set to “Yes”, the SIP user’s registration information will be cleared
on reboot.
This parameter allows user to specify the time frequency (in minutes) that
GXP1100/1105 refreshes its registration with the specified registrar. The default
interval is 60 minutes. The maximum interval is 65,535 minutes (about 45 days).
Local SIP Port
This parameter defines the local SIP port used to listen and transmit. The default
value for Account 1 is 5060. It is 5062, 5064, 5066 for Account 2, Account 3 and
Account 4 respectively.
SIP Registration Failure Retry registration if the process failed. Default is 20 seconds.
Retry Wait Time
SIP T1 Timeout
SIP T2 Interval
SIP Transport
RFC 3261 SIP T1 timer. Default is 0.5 second.
RFC 3261 SIP T2 timer. Default is 4 seconds.
Choose SIP Transport between UDP and TCP. Default is UDP.
Enable to check the domain certificate. Default is “No”.
Check Domain
Certificate
Remove OBP from
Route
The SIP Extension notifies the SIP server that it is behind a NAT/firewall.
Validate Incoming
Messages
This configuration selects whether or not the incoming messages should be
validated.
Support SIP Instance ID Selects whether or not SIP Instance ID is supported.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 21 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
NAT Traversal
This parameter activates the NAT traversal mechanism. It has options: No, STUN,
Keep-Alive, UPnP, Auto, VPN.
If selecting STUN and a STUN server is also specified, the phone performs
according to the STUN client specification. Using this mode, the embedded STUN
client detects if and what type of NAT/Firewall configuration is used. If the detected
NAT is a Full Cone, Restricted Cone, or a Port-Restricted Cone, the phone will use
its mapped public IP address and port in all of its SIP and SDP messages.
If selecting Keep-Alive with no specified STUN server, the GXP1100/1105 will
periodically (every 20 seconds or so) send a blank UDP packet (with no payload
data) to the SIP server to keep the “hole” on the NAT open.
SUBSCRIBE for MWI:
Default is “No”. When set to “Yes” a SUBSCRIBE for Message Waiting Indication
will be sent periodically.
SUBSCRIBE for
Registration
Default is “No”. When set to “Yes” a SUBSCRIBE for Registration will be sent
periodically.
PUBLISH for Presence Enable Presence feature.
Proxy-Require
SIP Extension to notify SIP server that the unit is behind the NAT/Firewall.
Voice Mail UserID
When configured, user can access messages by pressing “MSG” button. This ID is
usually the VM portal access number.
Send DTMF
This parameter specifies the mechanism to transmit DTMF digit. There are 3
supported modes: in audio which means DTMF is combined in audio signal (not
very reliable with low-bit-rate codec), via RTP (RFC2833), or via SIP INFO.
DTMF Payload Type
Early Dial
Sends DTMF using RFC2833. The default is 101.
Default is “No”. Use only if proxy supports 484 responses.
Sets the prefix added to each dialed number.
Dial Plan Prefix
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 22 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Dial Plan
Dial Plan Rules:
1. Accepted Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d
2. Grammar: x - any digit from 0-9;
a) xx+ - at least 2 digit numbers
b) xx. - only 2 digit numbers
c) ^ - exclude
d) [3-5] - any digit of 3, 4, or 5
e) [147] - any digit of 1, 4, or 7
f) <2=011> - replace digit 2 with 011 when dialing
g) | - the OR operand
• Example 1: {[369]11 | 1617xxxxxxx}
Allow 311, 611, and 911 or any 10 digit numbers with leading digits 1617
• Example 2: {^1900x+ | <=1617>xxxxxxx}
Block any number of leading digits 1900 or add prefix 1617 for any dialed 7 digit
numbers
• Example 3: {1xxx[2-9]xxxxxx | <2=011>x+}
Allows any number with leading digit 1 followed by a 3 digit number, followed by any
number between 2 and 9, followed by any 7 digit number OR Allows any length of
numbers with leading digit 2, replacing the 2 with 011 when dialed.
3. Default: Outgoing – {x+}
Allow any length of numbers.
Example of a simple dial plan used in a Home/Office in the US:
{ ^1900x. | <=1617>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011[2-9]x. | [3469]11 }
Explanation of example rule (reading from left to right):
• ^1900x. - prevents dialing any number started with 1900
• <=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers by dialing
7 numbers and 1617 area code will be added automatically
• 1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11 digits
length
• 011[2-9]x. - allows international calls starting with 011
• [3469]11 - allow dialing special and emergency numbers 311, 411, 611 and 911
Note: In some cases where the user wishes to dial strings such as *123 to activate
voice mail or other applications provided by their service provider, the * should be
predefined inside the dial plan feature. An example dial plan will be: { *x+ } which
allows the user to dial * followed by any length of numbers.
Delayed Call Forward
Wait Time
Time waited before the call is forward to a number or VM.
Default is 20 seconds.
Enable Call Features
Default is “Yes”. If set to “No”, Call transfer, Call Forwarding are supported locally
provided ITSP support those features. In addition, “ForwardAll” softkey will be
hidden if call feature code is disabled for Account 1.
Call Log
User can choose to disable Call Log and what kind of calls to log.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 23 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Session Expiration
The SIP Session Timer extension enables SIP sessions to be periodically
“refreshed” via a SIP request (UPDATE, or re-INVITE. Once the session interval
expires, if there is no refresh via a UPDATE or re-INVITE message, the session is
terminated.
Session Expiration is the time (in seconds) at which the session is considered timed
out, provided no successful session refresh transaction occurs beforehand. The
default value is 180 seconds.
Min-SE
Defines the minimum session expiration (in seconds). Default is 90 seconds.
Caller Request Timer
If set to “Yes”, the phone will use session timer when it makes outbound calls if
remote party supports session timer.
Callee Request Timer
Force Timer
If selecting “Yes”, the phone will use session timer when it receives inbound calls
with session timer request.
If set to “Yes”, the phone will use session timer even if the remote party does not
support this feature. If set to “No”, the session timer is enabled only when the
remote party supports this feature. To turn off Session Timer, select “No” for Caller
Request Timer, Callee Request Timer, and Force Timer.
UAC Specify Refresher As a Caller, select UAC to use the phone as the refresher, or UAS to use the Callee
or proxy server as the refresher.
UAS Specify Refresher As a Callee, select UAC to use caller or proxy server as the refresher, or UAS to
use the phone as the refresher.
Force INVITE
Session Timer can be refreshed using INVITE method or UPDATE method. Select
“Yes” to use INVITE method to refresh the session timer.
Enable 100rel
PRACK (Provisional Acknowledgment) method enables reliability to SIP provisional
responses (1xx series). This is required to support PSTN inter-networking.
Account Ring Tone
There are 4 uniquely defined ring tones:
•
One (1) System Ring Tone: when selected, all calls will ring with system
ring tone.
•
Three (3) Customer Ring Tones: when selected, incoming calls from
designated account will play selected ring tone.
Ring Timeout
Defines how long ring will ring when receiving a call. Default is 60 seconds.
Send Anonymous
If this parameter is set to “Yes”, the “From” header in outgoing INVITE message will
be set to anonymous, essentially blocking the Caller ID from displaying.
Anonymous Call
Rejection
Default is “No”. If set to “Yes”, anonymous call will be rejected.
Refer-To Use Target
Contact
Default is “No”. If set to “Yes”, then for Attended Transfer, the “Refer-To” header
uses the transferred target’s Contact header information.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 24 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Preferred Vocoder
GXP1100/1105 supports up to 7 different Vocoder types including G.711(a/µ) (also
known as PCMU/PCMA), G.723.1, G.729A/B, G.726-32, iLBC, G.722 (wide-band).
Configure Vocoders in a preference list that is included with the same preference
order in SDP message. Enter the first Vocoder in this list by choosing the
appropriate option in “Choice 1”. Similarly, enter the last Vocoder in this list by
choosing the appropriate option in “Choice 8”.
SRTP Mode
Enable SRTP mode based on selection. Default is “No”.
Selects whether or not symmetric RTP is supported.
Symmetric RTP
Silence Suppression
This controls the silence suppression/VAD feature of the audio codec G.723 and
G.729. If set to “Yes”, when silence is detected, a small quantity of VAD packets
(instead of audio packets) will be sent during the period of no talking. If set to “No”,
this feature is disabled.
Voice Frames per TX
This field contains the number of voice frames to be transmitted in a single Ethernet
packet (be advised the IS limit is based on the maximum size of Ethernet packet is
1500 byte (or 120kbps)).
When setting this value, be aware of the requested packet time (ptime, used in SDP
message) is a result of configuring this parameter. This parameter is associated
with the first codec in the above codec Preference List or the actual used payload
type negotiated between the 2 conversation parties at run time. E.g., if the first
codec is configured as G.723 and the “Voice Frames per TX” is set to 2, then the
“ptime” value in the SDP message of an INVITE request will be 60ms because each
G.723 voice frame contains 30ms of audio. Similarly, if this field is set to 2 and the
first codec is G.729 or G.711 or G.726, then the “ptime” value in the SDP message
of an INVITE request will be 20ms.
If the configured voice frames per TX exceeds the maximum allowed value, the IP
phone will use and save the maximum allowed value for the corresponding first
codec choice. The maximum value for PCM is 10 (x10ms) frames; for G.726, it is 20
(x10ms) frames; for G.723, it is 32 (x30ms) frames; for G.729/G.728, 64 (x10ms)
and 64 (x2.5ms) frames respectively.
Please be careful when editing these parameters. Adjusting these parameters will
also change the dynamic jitter buffer. The GXP1100/1105 has a patent dynamic
jitter buffer handling algorithm. The jitter buffer range is 20 ~ 200 ms.
We recommend using the default settings provided. We do not recommend
adjusting these parameters if you are an average user. Incorrect settings will affect
the voice quality.
No Key Entry Timeout
Use # as Dial Key
Default is 4 seconds.
This parameter allows users to configure the “#” key as the “Send” (or “Dial”) key. If
set to “Yes”, the “#” key will immediately send the call. In this case, this key is
essentially equivalent to the “(Re)Dial” key. If set to “No”, the “#” key is included as
part of the dial string.
G723 Rate
Encoding rate for G723 codec. By default, 6.3kbps rate is set.
G726-32 Packing Mode Select “ITU” or “IETF” for G726-32 packing mode.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 25 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
iLBC Frame Size
iLBC packet frame size. Default is 20ms. For Asterisk PBX, 30ms might be
required.
iLBC Payload Type
Special Feature
Payload type for iLBC. Default value is 97. The valid range is between 96 and 127.
Default is Standard. Choose the selection to meet special requirements from Soft
Switch vendors.
SAVING THE CONFIGURATION CHANGES
After the user makes a change to the configuration, press the “Update” button in the Configuration Menu. We
recommend rebooting or powering cycle the IP phone after saving changes.
REBOOTING THE PHONE REMOTELY
Press the “Reboot” button at the bottom of the configuration menu to reboot the phone remotely. The
indicator on the top right corner will first turn orange and then red. Wait until the indicator is off. Then log in
again.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 26 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Upgrade & Customization
Software (or firmware) upgrades are completed via either TFTP or HTTP. The corresponding configuration
settings are in the ADVANCED SETTINGS configuration page.
FIRMWARE UPGRADE THROUGH TFTP/HTTP
To upgrade via TFTP or HTTP, select TFTP or HTTP upgrade method. “Upgrade Server” needs to be set to
a valid URL of a HTTP server. Server name can be in either FQDN or IP address format. Here are examples
of some valid URLs.
•
•
firmware.mycompany.com:6688/Grandstream/1.2.3.5
72.172.83.110
There are two ways to set up the Upgrade Server to upgrade firmware: via IVR Menu and Web Configuration
Interface.
IVR Menu
To configure the Upgrade Server via IVR
•
•
•
•
Pick up the handset, press “***”.
Input menu option “15”-“Upgrade Protocol”. Press “9” to toggle between different upgrade methods.
Press “#” to return to the main menu and input menu option “13”-“Firmware Server IP Address”.
Input the 12 digit firmware upgrade IP address. For example: If the firmware upgrade IP address is
10.0.50.191, 010000050191 should be the input.
Web Configuration Interface
To configure the Upgrade Server via the Web configuration interface, open the web browser. Enter the
GXP1100/1105 IP address. Enter the admin password to access the web configuration interface. In the
ADVANCED SETTINGS page, enter the Upgrade Server’s IP address or FQDN in the “Firmware Server
Path” field. Select TFTP or HTTP upgrade method. Update the change by clicking the “Update” button.
“Reboot” or power cycle the phone to update the new firmware.
The indicator on the top right corner will turn orange and red and then turn off which indicates the phone has
restarted. After a while the indicator will blink in red meaning the download is in process. When download is
done you will see the phone restarts again. Please do NOT disrupt or power down the unit. If a firmware
upgrade fails for any reason (e.g., TFTP/HTTP server is not responding, there are no code image files
available for upgrade, or checksum test fails, etc), the phone will stop the upgrading process and re-boot
using the existing firmware/software.
Firmware upgrades take around 60 seconds in a controlled LAN or 5-10 minutes over the Internet. We
recommend completing firmware upgrades in a controlled LAN environment whenever possible.
No Local TFTP/HTTP Server
For users who do not have a local TFTP/HTTP server, we provide a HTTP server on the public Internet for
users to download the latest firmware upgrade automatically. Please check the Support/Download section of
Alternatively, download and install a free TFTP or HTTP server to the LAN to perform firmware upgrades. A
free Windows version TFTP server is available:
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 27 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions for Local TFTP Upgrade
1. Unzip the file and put all of them under the root directory of the TFTP server.
2. The PC running the TFTP server and the GXP1100/1105 should be in the same LAN
segment.
3. Go to File -> Configure -> Security to change the TFTP server's default setting from
"Receive Only" to "Transmit Only" for the firmware upgrade.
4. Start the TFTP server.
5. Configure the Firmware Server Path with the IP address of the PC
6. Update the change and reboot the unit
User can also choose to download the free HTTP server from http://httpd.apache.org/ or use Microsoft IIS
web server.
NOTE:
•
When GXP1100/1105 phone boots up, it will send TFTP or HTTP request to download configuration
file “cfg000b82xxxxxx”, where “000b82xxxxxx” is the MAC address of the GXP1100/1105 phone.
This file is for provisioning purpose. For normal TFTP or HTTP firmware upgrades, the following
error messages in a TFTP or HTTP server log can be ignored: “TFTP Error from [IP ADRESS]
requesting cfg000b82023dd4: File does not exist. Configuration File Download”
CONFIGURATION FILE DOWNLOAD
The GXP1100/1105 can be configured via Web Interface as well as via Configuration File (binary or XML)
through TFTP or HTTP/HTTPS. The “Config Server Path” is the TFTP or HTTP server path for the
configuration file. It needs to be set to a valid URL, either in FQDN or IP address format. The “Config Server
Path” can be the same or different from the “Firmware Server Path”.
A configuration parameter is associated with each particular field in the web configuration page. A parameter
consists of a Capital letter P and 2 to 4 digit numeric numbers. i.e., P2 is associated with “Admin Password”
in the ADVANCED SETTINGS page. For a detailed parameter list, please refer to the corresponding
configuration template of the firmware.
Once the GXP1100/1105 boots up (or re-booted), it will request a configuration file named “cfgxxxxxxxxxxxx”
followed by a request for configuration XML file named “cfgxxxxxxxxxxxx.xml”, where “xxxxxxxxxxxx” is the
MAC address of the device, i.e., “cfg000b820102ab”. The configuration file name should be in lower cases.
Managing Firmware and Configuration File Download
When “Automatic Upgrade” is set to “Yes”, a Service Provider can use P193 (Auto Check Interval, in
minutes, default and minimum is 60 minutes) to have the devices periodically check for upgrades at pre-
scheduled time intervals. By defining different intervals in P193 for different devices, a Server Provider can
manage and reduce the Firmware or Provisioning Server load at any given time.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 28 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Restore Factory Default Setting
WARNING: Restoring the Factory Default Setting will delete all configuration information of the phone.
Please backup or print all the settings before you restoring factory default settings. We are not responsible
for restoring lost parameters and cannot connect your device to your VoIP service provider.
INSTRUCTIONS FOR RESTORATION:
Step 1: Press “***” to enter the IVR menu. Input “99” to for factory reset.
Step 2: Enter the MAC address printed on the bottom of the sticker. Please use the following mapping:
0-9: 0-9
A:
B:
22 (press the “2” key twice, “A” will show on the LCD)
222
C: 2222
D: 33 (press the “3” key twice, “D” will show on the LCD)
E: 333
F: 3333
Example: if the MAC address is 000b8200e395, it should be key in as “0002228200333395”.
NOTE: If there are digits like “22” in the MAC, you need to wait for 4 seconds to continue to key in
another “2”.
Step 3: Once the MAC address is correctly input, the phone will reboot. Otherwise, it will announce
“Invalid Entry” and exit to the main menu.
Grandstream Networks, Inc.
GXP1100/1105 User Manual
Page 29 of 29
Firmware version: 1.0.1.80
Last Updated: 07/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
|