Hardware Guide
HP Compaq Notebook Series
Document Part Number: 309971-002
October 2003
This guide explains how to identify and use notebook hardware
features, including connectors for external devices. It also
includes power and environmental specifications, which may be
helpful when traveling with the notebook.
Download from Www.Somanuals.com. All Manuals Search And Download.
Left-Side Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4
Front Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–6
Using Hotkeys and Shortcut Keys . . . . . . . . . . . . . . . . . . 2–4
Identifying Fn and Function Keys. . . . . . . . . . . . . . . 2–5
Hotkey and Shortcut Key Quick Reference . . . . . . . 2–5
Hotkey and Shortcut Key Procedures . . . . . . . . . . . . 2–6
Hotkey and Shortcut Key Commands . . . . . . . . . . . . 2–6
Switching the Display (Fn+F4) . . . . . . . . . . . . . . . . . 2–7
Viewing Battery Charge Information (Fn+F8) . . . . . 2–7
Hardware Guide
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Increasing Screen Brightness (Fn+F10) . . . . . . . . . . 2–8
Keyboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8
3 Battery Packs
How to Calibrate . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–19
Conserving Battery Power . . . . . . . . . . . . . . . . . . . . . . . 3–22
Conserving Power as You Work . . . . . . . . . . . . . . . 3–22
Selecting Power Conservation Settings. . . . . . . . . . 3–23
Storing a Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . 3–24
Disposing of a Used Battery Pack . . . . . . . . . . . . . . . . . 3–25
Finding More Power Information . . . . . . . . . . . . . . . . . 3–25
iv
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Hard Drive
Using Audio Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1
Using the Microphone Input Jack . . . . . . . . . . . . . . . 5–2
Using a Country-Specific Adapter Cable . . . . . . . . . 6–4
Linking to an Infrared Device . . . . . . . . . . . . . . . . . . . . . 6–7
7 External Devices
Connecting a Monitor or Projector . . . . . . . . . . . . . . . . . 7–2
Using a USB Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–2
Enabling USB Legacy Support . . . . . . . . . . . . . . . . . 7–3
Connecting an Optional External MultiBay. . . . . . . . . . . 7–4
Connecting an Optional Cable Lock . . . . . . . . . . . . . . . . 7–5
Hardware Guide
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Inserting a PC Card . . . . . . . . . . . . . . . . . . . . . . . . . . 8–2
Inserting an SD Card . . . . . . . . . . . . . . . . . . . . . . . . . 8–4
Adding and Upgrading Memory Modules. . . . . . . . . . . . 8–6
Upgrading the Memory Module in the Primary
Effects of Increasing Memory . . . . . . . . . . . . . . . . . . . . 8–14
9 Specifications
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . 9–1
Rated Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–2
Modem Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–2
Index
vi
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Hardware Features
Pointing Device Components
Component
Pointing stick
Description
Moves the pointer and selects or
activates items on the screen.
1
2
3
Left and right pointing stick
buttons
Function like the left and right buttons
on an external mouse.
TouchPad
Moves the pointer and selects or
activates items on the screen. Can be
set to perform other mouse functions,
such as scrolling and double-clicking.
Left and right TouchPad
buttons
Function like the left and right buttons
on an external mouse.
4
Hardware Guide
1–1
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Features
Top Components
Component
Description
Quick Launch buttons (3)
Enable you to access common
functions with a single keystroke.
1
2
Power button
When the notebook is*
■
■
■
Off, press and release to turn
on the notebook.
In Standby, press and release
to exit Standby.
In Hibernation, press and
release to exit Hibernation.
If the system has stopped
responding and Microsoft®
Windows® shutdown procedures
cannot be used, press and hold for
5 seconds to turn off the notebook.
*This table describes default settings. For information about changing
the functions of the power button and about using Standby and
Hibernation, refer to the “Power” chapter in the Software Guide on the
Documentation Library CD.
(continued)
1–2
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Features
Component
Description
Volume control buttons
Increase, decrease, and mute the
system volume.
3
4
Function keys
Execute frequently used system
functions when pressed in
combination with the Fn key.
Applications key
Displays shortcut menu for items
beneath the pointer.
5
6
Display release latch recess Secures the display when it is
closed.
Windows logo key
Displays the Windows Start menu.
7
8
Fn key
Executes frequently used system
functions when pressed in
combination with another key.
Not
Primary memory
Contains the primary memory slot.
shown compartment (not shown,
located under the keyboard)
Hardware Guide
1–3
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Features
Left-Side Components
Component
Infrared port
Description
Links another IrDA-compliant device
for wireless communication.
1
2
3
4
5
PC Card eject button
PC Card slot
Ejects an optional PC Card from the
PC Card slot.
Supports optional Type I or Type II
32-bit (CardBus) or 16-bit PC Cards.
Secure Digital (SD) Card slot Accepts SD Memory Cards used as
removable storage devices.
Audio line-out jack
Connects optional powered stereo
speakers, headphones, headset, or
television audio.
Microphone input jack
Speaker
Connects an optional microphone.
Produces system sound.
6
7
1–4
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Features
Right-Side Components
Component
Description
Security cable slot
Attaches an optional security cable to
the notebook.
1
The purpose of security
✎
solutions is to act as a
deterrent. These solutions do
not prevent the product from
being mishandled or stolen.
Hard drive bay
Exhaust vent
Holds the primary hard drive.
2
3
Enables airflow to cool internal
components.
To prevent overheating, do
Ä
not obstruct vents. Using the
notebook on a soft surface
such as a pillow, blanket, rug,
or thick clothing can block
airflow.
Hardware Guide
1–5
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Features
Front Components
Component
Description
Antennae
Send and receive wireless LAN
(WLAN) signals.
1
The antennae covers are not
Ä
removable. Removing the
covers can cause damage to
the antennae.
Display release latch
Microphone
Opens the notebook.
2
3
Inputs single-channel sound.
Exposure to Radio Frequency Radiation
Å
The radiated output power of this device is below the FCC radio
frequency exposure limits. Nevertheless, the device should be
used in such a manner that the potential for human contact
during normal operation is minimized. To avoid the possibility of
exceeding the FCC radio frequency exposure limits, human
proximity to the antenna should not be less than 20 cm (8 inches)
during normal operation, including when the notebook display is
closed.
1–6
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Features
Rear Components
Component
Description
S-Video-out jack
Connects an optional S-Video device,
such as a television, VCR, camcorder,
overhead projector, or video capture
card.
1
External monitor connector
USB connector
Connects an optional external monitor
or overhead projector.
2
3
Connects USB 1.1- and 2.0-compliant
devices to the notebook using a
standard USB cable.
Self-powered USB connector Connects USB 1.1- and 2.0-compliant
devices to the notebook using a
4
standard USB cable, or an optional
External MultiBay to the notebook
using the External MultiBay-Powered
USB cable.
AC power connector
Connects an AC adapter or an optional
Automobile Power Adapter/Charger or
Aircraft Power Adapter.
5
RJ-45 network jack
Connects a network cable.
Connects a modem cable.
6
7
RJ-11 telephone jack
Hardware Guide
1–7
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Features
Bottom Components
Component
Description
Travel battery connector
Connects the optional travel battery
caddy. The travel battery connector
has a plastic cover that must be
opened before the travel battery caddy
is connected.
1
2
Docking connector
Connects the notebook to an optional
HP Port Replicator or an HP Advanced
Port Replicator.
(continued)
1–8
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Features
Component
Description
Mini PCI compartment
Contains the Mini PCI wireless card.
3
The FCC does not allow
Ä
unauthorized Mini PCI
devices to be used in this
notebook. Installing an
unauthorized Mini PCI device
can prevent your notebook
from operating properly and
might result in a warning
message. To resume proper
notebook operation, remove
the unauthorized device.
Contact your HP Customer
Care Center if a warning
message about your Mini PCI
device displays in error.
Intake vents
Enable airflow to cool internal
components.
4
To prevent overheating, do
Ä
not obstruct vents. Using the
notebook on a soft surface
such as a pillow, blanket, rug,
or thick clothing can block
airflow.
Battery release latch
Quick Check button
Releases the primary battery pack
from the battery bay.
5
6
Displays the percentage of a full
charge remaining on a battery pack
using the Quick Check lights.
Battery power gauge
Battery bay
Indicates the charge remaining on a
battery pack.
7
Holds the primary battery pack.
8
9
Memory expansion
compartment
Contains 1 memory expansion slot for
optional memory expansion boards.
Hardware Guide
1–9
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Features
Lights
Component
Description
Hard drive activity
Num lock
On: The hard drive is being accessed.
1
2
On: Num lock is on or the embedded
numeric keypad is enabled.
Caps lock
On: Caps lock is on.
On: Scroll lock is on.
3
4
5
Scroll lock
Wireless on/off
On: The wireless Mini PCI card and/or
Bluetooth® are on.
Off: The wireless Mini PCI card and
Bluetooth are off.
Power/Standby
Battery
On: Power is turned on.
Blinking: Notebook is in Standby.
6
7
On: A battery pack is charging.
Blinking: A battery pack that is the only
available power source has reached a
low-battery condition. When the
battery reaches a critical low-battery
condition, the battery light begins
blinking more quickly.
1–10
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Features
Labels
The labels affixed to the bottom of the notebook and to the inside
of the battery compartment provide information you may need
when you troubleshoot system problems or travel abroad with the
notebook.
■
■
The Service Tag label affixed to the bottom of the notebook
contains the product name, product number (P/N), and serial
number (S/N). You will need the notebook serial number and
product number if you call customer support.
The Microsoft Certificate of Authenticity label affixed to the
bottom of the notebook contains the Product Key number.
You may need this number to update or troubleshoot
problems with the operating system.
■
■
The System label affixed to the bottom of the notebook
provides regulatory information about the notebook.
The Modem Approval label affixed to the bottom of the
notebook provides regulatory information and lists the
agency markings required by some of the countries in which
the modem has been approved for use. You may need to
use this modem information in order to operate the modem
while traveling internationally.
■
■
The WLAN label affixed to the bottom of the notebook
provides regulatory information and lists the agency
markings required by some of the countries in which the
optional wireless devices have been approved for use. You
may need to use this wireless device information in order to
operate the wireless device while traveling.
The Bluetooth® label affixed to the bottom of the notebook
provides regulatory information and lists the agency
markings required by some of the countries in which the
optional device has been approved for use. You may need
to use this wireless device information in order to operate the
wireless device while traveling internationally. Bluetooth is
not supported in all countries.
Hardware Guide
1–11
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Pointing Devices and Keyboard
Using a Pointing Device
By default, the pointing stick and TouchPad components can be
used interchangeably.
Pointing device components
Component
Pointing stick
Description
Moves the pointer and selects or
activates items on the screen.
1
2
Left and right pointing stick
buttons
Function like the left and right buttons
on an external mouse.
(continued)
Hardware Guide
2–1
Download from Www.Somanuals.com. All Manuals Search And Download.
Pointing Devices and Keyboard
Component
Description
TouchPad
Moves the pointer and selects or
3
4
activates items on the screen. Can be
set to perform other mouse functions,
such as scrolling and double-clicking.
Left and right TouchPad
buttons
Function like the left and right buttons
on an external mouse.
Using the Pointing Stick
To move the pointer, press the pointing stick in the direction you
want to move the pointer. Use the left and right pointing stick
buttons as you would the left and right buttons on an external
mouse.
To change the pointing stick cap:
1. Save your work, exit all applications, and shut down the
notebook. If you are not sure whether the notebook is off or
in Hibernation, briefly press the power button. If your work
returns to the screen, save your work, exit all applications,
and then shut down the notebook.
2. Gently pull off the used pointing stick cap.
2–2
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Pointing Devices and Keyboard
3. Push a replacement cap into place.
Replacing the pointing stick cap
Using the TouchPad
To move the pointer, slide your finger across the TouchPad
surface in the direction you want to move the pointer. Use the left
and right TouchPad buttons as you would the left and right
buttons on an external mouse.
Using an External Mouse
An external USB mouse can be connected to the notebook using
one of the USB connectors on the back panel. An external PS/2 or
USB mouse can be connected to the system using the connectors
on an optional HP Port Replicator or an HP Advanced Port
Replicator.
Hardware Guide
2–3
Download from Www.Somanuals.com. All Manuals Search And Download.
Pointing Devices and Keyboard
Setting Pointing Device Preferences
Mouse Properties in Windows enables you to change custom
settings for pointing devices, including:
■
■
Enabling or disabling a pointing device.
TouchPad tapping, which enables you to tap the TouchPad
once to select an object or twice to double-click an object.
■
■
Edge motion, which enables you to continue to scroll even
though your finger has reached the edge of the TouchPad.
Palm Check, which helps prevent moving the pointer
unintentionally if your palms contact the TouchPad as you
type.
Other features, such as mouse speed preferences and mouse trails,
are also found in the Mouse Properties windows.
To access Mouse Properties:
■
In Windows XP, select Start > Control Panel > Printers and
Other Hardware > Mouse icon.
■
In Windows 2000, select Start > Settings > Control Panel >
Mouse icon.
Using Hotkeys and Shortcut Keys
Hotkeys and shortcut keys are preset combinations of the Fn key
with other keys on the keyboard.
■
A hotkey is a combination of the Fn key and one of the
function keys.The icons on the function keys represent the
hotkey functions available on your notebook.
■
A shortcut key is a combination of the Fn key and a key other
than a function key.
2–4
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Pointing Devices and Keyboard
Identifying Fn and Function Keys
Fn and function keys
Component
Fn key
1
2
Function keys
Hotkey and Shortcut Key Quick Reference
Key Combination to Key Combination to
Function
Activate Function
Deactivate Function
Initiate Standby
Fn+F3
Fn+F4
Fn+F8
Fn+F9
Power button
Fn+F4
Switch display and image
View battery information
Fn+F8
Decrease display
brightness.
N/A
Increase display
brightness.
Fn+F10
N/A
Display system information Fn+esc
Fn+esc
Hardware Guide
2–5
Download from Www.Somanuals.com. All Manuals Search And Download.
Pointing Devices and Keyboard
Hotkey and Shortcut Key Procedures
To use a hotkey or shortcut key command on the notebook
keyboard, use either of the following procedures:
■
Briefly press the Fn key, and then briefly press the second key
of the hotkey command.
■
Press and hold down the Fn key, briefly press the second key
of the hotkey command, and then release both keys at the
same time.
Hotkey and Shortcut Key Commands
Displaying System Information (Fn+esc)
Press Fn+esc to display information about system hardware
components and software version numbers. Press Fn+esc a second
time to remove the system information from the screen.
The system BIOS date is the version number of the system ROM.
The BIOS date may display in a decimal format, for example,
10/19/2002 F.07.
✎
Initiating Standby (Fn+F3)
The Fn+F3 hotkey is set by default to initiate Standby. Standby can
be initiated only while the notebook is on. If the notebook is in
Hibernation, you must restore from Hibernation before you can
initiate Standby.
To restore from Hibernation or resume from Standby, briefly
press the power button. For more information about using
Standby and Hibernation, refer to the “Power” chapter in the
Software Guide on the Documentation Library CD.
2–6
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Pointing Devices and Keyboard
Switching the Display (Fn+F4)
The Fn+F4 hotkey switches the image between display devices
connected to the external monitor connector or the S-Video jack
on the notebook. For example, if an external monitor is connected
to the notebook, pressing the Fn+F4 hotkey multiple times will
toggle the image between the notebook display, the external
monitor display, and a simultaneous display on both the notebook
and the monitor.
Most external monitors receive video information from the
notebook using the external VGA video standard. The Fn+F4
hotkey can also toggle images between other devices receiving
video information from the notebook.
The following five video transmission types, with examples of
devices that use them, are supported by the Fn+F4 hotkey:
■
■
■
LCD (notebook display)
External VGA (most external monitors)
S-Video (televisions, camcorders, VCRs, and video capture
boards with S-Video-in jacks)
Viewing Battery Charge Information (Fn+F8)
Press Fn+F8 to display charge information for all installed battery
packs. The display indicates which battery packs are charging and
reports the amount of charge remaining in each battery pack.
Battery pack locations are indicated by number:
■
■
Location 1 is the primary battery pack.
Location 2 is the travel battery pack.
Decreasing Screen Brightness (Fn+F9)
The Fn+F9 hotkey decreases notebook screen brightness. Hold
down the hotkey to decrease the brightness level incrementally.
Hardware Guide
2–7
Download from Www.Somanuals.com. All Manuals Search And Download.
Pointing Devices and Keyboard
Increasing Screen Brightness (Fn+F10)
The Fn+F10 hotkey increases notebook screen brightness. Hold
down the hotkey to increase the brightness level incrementally.
Using Hotkeys and Shortcut Keys with
External Keyboards
The following hotkeys and shortcut keys can be used as described
with external keyboards:
■
■
Fn+esc
Fn+F8
To use hotkeys or shortcut keys on an external keyboard, press the
scroll lock key twice, and then the other key of the hotkey
combination. For example, to use the Fn+F8 hotkey, press scroll
lock+scroll lock+F8.
2–8
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Pointing Devices and Keyboard
Using Quick Launch Buttons
The 3 Quick Launch buttons enable you to access common
functions with a single keystroke.
Quick Launch buttons
Component
Description
QuickLock button
Disables the keyboard and pointing device and clears
the display. Before you can use QuickLock, you must
set a password and select preferences. For more
information, refer to the “Security” chapter in the
Software Guide on the Documentation Library CD.
1
Wireless On/Off
button
Turns the wireless LAN or optional Bluetooth device
on and off when these devices are enabled in the
software utilities.
2
3
Presentation Mode Sets the notebook to presentation mode, which
button
opens a user-defined application, folder, file, or Web
site. The image simultaneously displays on the
notebook screen and an external device connected to
the external monitor connector or S-Video-out jack on
the rear panel or to connectors on an optional Port
Replicator.
Hardware Guide
2–9
Download from Www.Somanuals.com. All Manuals Search And Download.
Pointing Devices and Keyboard
Using Keypads
The notebook has an internal numeric keypad and supports an
optional external numeric keypad or an optional external
keyboard that includes a numeric keypad.
Using the Embedded Numeric Keypad
The 15 keys of the embedded numeric keypad can be used like
the keys on an external keypad. When the internal keypad is
turned on, each key on the internal keypad performs the functions
indicated by the icon in the upper right corner of the key.
Embedded numeric keypad components
Component
Num lock light
Num lk key
1
2
3
4
Embedded numeric keypad
Fn key
2–10
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Pointing Devices and Keyboard
Enabling and Disabling the Internal Keypad
Press Fn+num lk to enable the embedded numeric keypad. The num
lock light turns on. Press Fn+num lk again to return the keys to their
standard keyboard functions.
The numeric keypad cannot be enabled while an optional external
keyboard or keypad is connected to the notebook or to an optional
Port Replicator.
✎
Switching Key Functions on the Internal Keypad
You can temporarily switch the functions of keys on the internal
keypad between their standard keyboard functions and their
keypad functions by using the Fn key or the Fn+shift key
combination.
■
To change the functions of a keypad key to keypad functions
while the keypad is off, press and hold the Fn key while
pressing a keypad key.
■
To use the keypad keys temporarily as standard keys while
the keypad is on:
❏
❏
Press and hold the Fn key to type in lowercase.
Press and hold Fn+shift to type in uppercase.
Using an External Keypad
Most keys on most external keypads function differently when
num lock mode is on than when num lock mode is off. For
example:
■
■
When num lock mode is on, most keypad keys type numbers.
When num lock mode is off, most keypad keys function like
arrow, page up, or page down keys.
When num lock mode on an external keypad is turned on, the
num lock light on the notebook turns on. When the num lock
mode on an external keypad is turned off, the num lock light on
the notebook turns off.
Hardware Guide
2–11
Download from Www.Somanuals.com. All Manuals Search And Download.
Pointing Devices and Keyboard
If the external keypad is connected, the internal keypad cannot be
turned on.
Enabling or Disabling Num Lock Mode as You Work
To turn num lock mode on or off on an external keypad as you
work, press the num lk key on the external keypad, not on the
notebook.
Enabling or Disabling Num Lock Mode at Startup
To set the notebook to start up with a connected external keypad
in num lock mode, set your preference in Computer Setup. For
more information about using Computer Setup, refer to the
“Computer Setup” chapter in the Software Guide on the
Documentation Library CD.
To set the notebook to start up with the external keypad enabled:
1. Turn on or restart the notebook.
2. Press F10 while the F10 = ROM Based Setup message is
displayed in the lower left corner of the screen.
❏
❏
To change the language, press F2.
For navigation instructions, press F1.
3. Select Advanced > Device Options, and then press enter.
4. Select or clear the Num Lock State at Boot field:
❏
To start up an external keypad with num lock mode
turned on, select the field.
❏
To start up an external keypad with num lock mode
turned off, clear the field.
5. Press F10.
6. To save your preference and exit Computer Setup, select
File > Save Changes and Exit, and then follow the
instructions on the screen.
Your preference is set as you exit Computer Setup and is in effect
when the notebook restarts.
2–12
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Battery Packs
Running the Notebook on Battery
Power
When the notebook is connected to external AC power, the
notebook runs on AC power.
When a charged battery pack is in the notebook and the notebook
is not connected to external power, the notebook runs on battery
power.
The notebook switches between AC power and battery power
according to the availability of an external AC power source. For
example, if the notebook contains a charged battery pack and is
running on external AC power supplied through the AC adapter,
the notebook will switch to battery power if the AC adapter is
disconnected from the notebook.
You can leave a battery pack in the notebook or in storage,
depending on how you work. Keeping a battery pack in the
notebook enables the battery pack to charge whenever the
notebook is connected to external AC power and also protects
your work in case of a power outage.
On the other hand, battery packs in the notebook slowly discharge
when the notebook is turned off and not connected to external
power. For this reason, the primary battery pack is not shipped
inside the notebook and must be inserted before the notebook can
run on battery power.
Hardware Guide
3–1
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
If the notebook will be unused and not connected to external
power for 2 weeks or more, remove the battery pack and store it
as described in “Storing a Battery Pack” to prolong its life. For
more information about leaving your work, refer to the “Power”
chapter in the Software Guide on the Documentation Library CD.
Only compatible AC adapters and battery packs should be used
with the notebook. For additional information, visit the HP Web
Numbers booklet included with your notebook to contact an HP
Customer Care Center.
✎
This notebook supports up to 2 lithium ion battery packs: the
primary battery pack and an optional travel battery pack. The
same type of battery pack can be used in the notebook battery bay
and in the optional travel battery caddy.
Battery pack
3–2
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
Inserting or Removing the Primary
Battery Pack
The notebook battery bay holds the primary battery pack.
To insert the primary battery pack:
1. Turn the notebook upside-down.
2. Align the battery pack with the notebook battery bay.
3. Insert the battery pack tabs into the battery bay recesses.
Inserting the battery pack tabs into the battery bay recesses
Hardware Guide
3–3
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
4. Snap the battery pack into place.
Inserting the primary battery pack
5. Turn the notebook right-side up and open the display. If the
notebook is in Hibernation, press the power button to resume
operation.
3–4
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
To remove the primary battery pack:
CAUTION: To prevent loss of work when removing a battery pack that
is the sole power source, initiate Hibernation or turn off the notebook
before removing the battery pack.
Ä
1. Close the display and turn the notebook upside down.
2. Slide the battery release latch 1 in the direction shown. The
battery pack tilts upward.
3. Remove the battery pack from the battery bay 2.
Removing the primary battery pack
Hardware Guide
3–5
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
Using the Optional Travel Battery Pack
The optional travel battery pack attaches to the bottom of the
notebook. The optional travel battery kit includes the following
items:
■
■
■
Travel battery caddy
Battery pack
Documentation
Inserting or Removing the Battery Pack
To insert the battery pack into the travel battery caddy:
1. Align the battery pack with the travel battery caddy.
2. Insert the battery pack tabs into the travel battery caddy
recesses.
Inserting the battery pack tabs into the travel battery caddy
recesses
3–6
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
3. Snap the battery pack into place.
Inserting the battery pack into the travel battery caddy
To remove the battery pack from the travel battery caddy:
1. Eject the battery pack from the travel battery caddy by sliding
the battery release latch 1 in the direction shown. The battery
pack tilts upward.
2. Remove the battery pack from the travel battery caddy 2.
Removing a battery pack from the travel battery caddy
Hardware Guide
3–7
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
Attaching or Detaching the Travel Battery
Pack
To attach the optional travel battery pack to the notebook:
1. Open the travel battery connector on the bottom of the
notebook by sliding the cover toward the rear panel of
the notebook.
Opening the optional travel battery connector
3–8
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
2. Insert the tabs on the travel battery caddy into the recesses on
the bottom of the notebook.
Inserting the travel battery caddy tabs into the notebook recesses
3. Press the travel battery caddy onto the notebook until it snaps
into place.
Attaching the optional travel battery caddy
Hardware Guide
3–9
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
To detach an optional travel battery pack from the notebook:
1. Unlock the travel battery caddy from the notebook by sliding
the locking switch 1 in the direction shown.
2. Press the release latch 2.
3. Lift the travel battery caddy up and away from the
notebook 3.
Detaching the travel battery caddy from the notebook
Charging a Battery Pack
Multiple battery packs in the system charge and discharge in a
preset sequence:
■
Charge sequence:
1. Primary battery pack
2. Travel battery pack
■
Discharge sequence:
1. Travel battery pack
2. Primary battery pack
Hardware Guide
3–11
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
The primary battery pack charges when it is inside the battery bay
and the notebook is connected to external power. External power
can be supplied through an AC adapter, an optional Port
Replicator, an optional Advanced Port Replicator, or an optional
Automobile Power Adapter/Charger.
The battery pack in the travel battery caddy charges when it is
attached to the notebook and the notebook is connected to
external power. External power can be supplied through an AC
adapter or an optional Automobile Power Adapter/Charger.
Because the travel battery pack covers the docking connector, the
travel battery pack cannot be used or charged while a Port
Replicator or an Advanced Port Replicator is in use.
Battery packs can also be charged in the optional Universal
Charger. The optional Aircraft Power Adapter can be used to run
the notebook, but it cannot be used to charge a battery pack.
While the battery pack is charging, the battery light on the
notebook is on. The light turns off when the battery pack is fully
charged.
Battery light
3–12
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
To charge the primary battery pack:
1. Insert the battery pack into the notebook.
2. Connect the notebook to AC power. (The battery light turns
on.)
3. Leave the notebook connected to AC power until the battery
light turns off, signaling that the battery pack is fully charged.
To charge the travel battery pack:
1. Insert the battery pack into the travel battery caddy.
2. Attach the travel battery caddy to the notebook.
3. Connect the notebook to AC power. (The battery light turns
on.)
4. Leave the notebook connected to AC power until the battery
light turns off, signaling that the battery pack is fully charged.
Monitoring the Charge of a
Battery Pack
This section explains several ways you can determine the amount
of charge in your battery pack.
Obtaining Accurate Charge Information
To increase the accuracy of all battery charge displays:
■
Allow a battery pack to discharge to less than 5 percent of a
full charge through normal use before charging it.
■
■
When you charge a battery pack, charge it fully.
If a battery pack has been unused for one month or more,
calibrate the battery pack instead of simply charging it. For
calibration instructions, refer to “Calibrating a Battery Pack.”
Hardware Guide
3–13
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
Displaying Charge Information on the
Screen
This section explains how to access and interpret battery charge
information on the screen.
Accessing Charge Information
To access information about the status of any battery pack in the
notebook, do one of the following:
■
■
■
Select the Power icon on the taskbar.
Press Fn+F8.
Access the Power Meter tab:
❏
In Windows XP, select Start > Control Panel >
Performance and Maintenance > Power Options icon >
Power Meter tab.
❏
In Windows 2000, select Start > Settings > Control
Panel > Power Options icon > Power Meter tab.
Interpreting Charge Information
Most charge information reports battery status as both a
percentage and the number of minutes of charge remaining.
■
The percent indicates the amount of charge remaining in the
battery pack.
■
The time indicates the approximate running time remaining
on the battery pack if the battery pack continues to provide
power at the current level. For example, the time remaining
will decrease if you start playing a DVD and will increase if
you stop playing a DVD.
Most charge displays identify battery packs by location:
■
■
Location 1 is the notebook battery bay.
Location 2 is the optional travel battery caddy.
3–14
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
In some charge information, a lightning bolt icon might be
displayed beside a battery pack location. The icon indicates that
the battery pack in that location is charging.
Displaying Charge Information on a Battery
Pack
The battery Quick Check feature enables you to check the battery
pack charge information without having to turn on the notebook.
You do not have to remove a battery pack from the notebook
battery bay or from the travel battery caddy to check the charge
information. However, you must detach the travel battery caddy
from the notebook to check the charge of the travel battery pack.
To display the percentage of a full charge remaining on a battery
pack, press the Quick Check button 1 on the battery pack. The
Quick Check lights 2 on the battery pack indicate the charge
remaining, as shown in the following table.
Battery pack Quick Check button and lights
Hardware Guide
3–15
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
Percent of a Full Charge
Remaining
Indication
4 lights on
3 lights on
2 lights on
1 light on
76% to 100%
51% to 75%
26% to 50%
11% to 25%
1% to 10%
1 light blinking
Managing Low-Battery Conditions
Some low-battery condition alerts and system responses can be
changed in the Power Options window of the operating system.
The information in this section describes the alerts and system
responses set at the factory. Preferences set in the Power Options
window do not affect lights.
Identifying Low-Battery Conditions
This section explains how to identify low-battery and critical
low-battery conditions.
Low-Battery Condition
When a battery pack that is the only power source available
reaches a low-battery condition, the battery light blinks.
3–16
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
Critical Low-Battery Condition
If a low-battery condition is not resolved, the notebook enters a
critical low-battery condition. In a critical low-battery condition:
■
If Hibernation is enabled and the notebook is on or in
Standby, the notebook initiates Hibernation.
■
If Hibernation is disabled and the notebook is on or in
Standby, the notebook remains in Standby until there is no
power, then shuts down and loses your unsaved work.
To verify that Hibernation is enabled, be sure that the Enable
Hibernate Support check box on the Hibernate tab is selected. To
access the tab:
■
In Windows XP, select Start > Control Panel > Performance
and Maintenance > Power Options icon.
■
In Windows 2000, select Start > Settings > Control Panel >
Power Options icon.
Resolving Low-Battery Conditions
CAUTION: If the notebook has reached a critical low-battery condition
Ä
and has initiated Hibernation, do not press the power button until
Hibernation is complete. Hibernation is complete when the power light
turns off.
When External Power Is Available
To resolve a low-battery condition when external power is
available, select one of the following options:
■
■
Connect the AC adapter.
Plug an optional Automobile Power Adapter/Charger into the
notebook and into a vehicle cigarette lighter receptacle.
Hardware Guide
3–17
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
■
Plug an optional Aircraft Power Adapter into the notebook
and into the in-seat power supply available on some
commercial aircraft. (The optional Aircraft Power Adapter
can run the notebook but cannot charge a battery pack.)
■
Dock the notebook in an optional Port Replicator.
When a Charged Battery Pack Is Available
To resolve a low-battery condition when a charged battery pack is
available, turn off the notebook or initiate Hibernation, insert a
charged battery pack, and then turn on the notebook.
When No Power Source Is Available
To resolve a low-battery condition when no power source is
available, initiate Hibernation, or save your work and shut down
the notebook.
When the Notebook Cannot Exit Hibernation
To resolve a low-battery condition if the notebook lacks the
power to exit Hibernation:
1. Insert a charged battery pack or connect external power.
2. Exit Hibernation by briefly pressing the power button.
Calibrating a Battery Pack
To calibrate a battery pack manually, follow the instructions in
the following sections. To initiate an unattended calibration in an
optional Universal Charger, follow the instructions included with
the charger.
3–18
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
When to Calibrate
Even if a battery pack is heavily used, it should not be necessary
to calibrate it more than once a month. It is not necessary to
calibrate a new battery pack before first use. Calibrate the battery
pack under the following conditions:
■
■
■
When battery charge displays seem inaccurate.
When you observe a significant change in battery run time.
When the battery pack has been unused for 1 month or more.
How to Calibrate
To calibrate a battery pack, you must fully charge, fully
discharge, then fully recharge the battery pack.
Charging the Battery Pack
A battery pack can charge whether the notebook is off or in use,
but it will charge faster when the notebook is off.
To charge the battery pack:
1. Insert the battery pack into the notebook.
2. Connect the notebook to an AC outlet or an optional
Automobile Power Adapter/Charger. The battery light on the
notebook turns on.
3. Leave the notebook connected to external power until the
battery pack is fully charged. The battery light on the
notebook turns off.
Hardware Guide
3–19
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
Discharging the Battery Pack
Before you begin a full discharge, disable Hibernation. To disable
Hibernation:
1. Open the Power Options window:
❏
In Windows XP, select Start > Control Panel >
Performance and Maintenance > Power Options >
Hibernate tab.
❏
In Windows 2000, select Start > Settings > Control
Panel > Power Options > Hibernate tab.
2. Clear the Enable Hibernation check box.
The notebook must remain on while the battery pack is being
discharged. The battery pack can discharge whether or not you
are using the notebook, but it will discharge faster while the
notebook is in use.
■
If you plan to leave the notebook unattended during the
discharge, save your work before beginning the discharge
procedure.
■
If you use the notebook occasionally during the discharge
procedure and have set energy-saving timeouts, expect the
following performance from your system during the
discharge process:
❏
❏
The monitor will not turn off automatically.
Hard drive speed will not decrease automatically while
the notebook is idle.
❏
System-initiated Standby will not occur.
3–20
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
To fully discharge a battery pack:
1. Select the Power icon on the taskbar, or access the Power
Schemes tab:
❏
In Windows XP, select Start > Control Panel >
Performance and Maintenance > Power Options icon >
Power Schemes tab.
❏
In Windows 2000, select Start > Settings > Control
Panel > Power Management icon > Power Schemes tab.
2. Make a note of the 2 settings in the Plugged In column and
the 2 settings in the Running on Batteries column so that you
can reset them after the calibration.
3. Use the drop-down lists to set the 4 options (2 in each
column) to Never.
4. Select the OK button.
5. Disconnect the notebook from the external power source, but
do not turn off the notebook.
6. Run the notebook on battery power until the battery pack is
fully discharged. The battery light begins to blink when the
battery pack has discharged to a low-battery condition. When
the battery pack is fully discharged, the battery light turns off
and the notebook shuts down.
Recharging the Battery Pack
1. Connect the notebook to external power and maintain the
connection until the battery pack is fully recharged. The
battery light on the notebook turns off.
You can use the notebook while the battery pack is recharging
but the battery pack will charge faster if the notebook is off.
2. If the notebook is off, turn it on after the battery pack is fully
charged and the battery light turns off.
Hardware Guide
3–21
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
3. Access the Power Schemes tab:
❏
In Windows XP, select Start > Control Panel >
Performance and Maintenance > Power Options icon >
Power Schemes tab.
❏
In Windows 2000, select Start > Settings > Control
Panel > Power Management icon > Power Schemes tab.
4. Refer to the settings you recorded earlier. Re-enter the
settings that you recorded for the items in the Plugged In
column and the Running on Batteries column.
5. Click the OK button.
CAUTION: After calibrating the battery pack, re-enable Hibernation.
Failure to re-enable Hibernation can result in a complete battery drain and
potential data loss.
Ä
To re-enable Hibernation:
■
In Windows XP, select Start > Control Panel > Performance and
Maintenance > Power Options icon > Hibernate tab. Select the
Enable Hibernation check box.
■
In Windows 2000, select Start > Settings > Control Panel >
Power Options > Hibernate tab. Select the Enable Hibernation
check box.
Conserving Battery Power
Using the following battery conservation procedures and settings
extends the time that a battery pack can run the notebook from a
single charge.
Conserving Power as You Work
To conserve power as you use the notebook:
■
■
Turn off wireless and LAN connections and exit modem
applications when you are not using them.
Disconnect external devices you are not using that are not
connected to an external power source.
3–22
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
■
■
■
Stop or remove a PC Card or SD Memory Card that you are
not using.
Use the Fn+F9 and Fn+F10 hotkeys to quickly lower and raise
screen brightness as you need it.
Use optional powered speakers instead of the internal
speakers, or use the volume buttons to quickly raise and
lower system volume as needed.
■
Turn off a device connected to the S-Video connector by
using the Fn+F4 hotkey or by turning off support for the device
in Windows.
■
■
Run the notebook on external power while formatting a
diskette.
If the notebook will be idle for several minutes, initiate
Standby or Hibernation or shut down the notebook.
Selecting Power Conservation Settings
To set the notebook to conserve power:
■
Select a short wait for the screen saver and select a screen
saver with minimal graphics and motion. To access screen
saver settings:
❏
In Windows XP, select Start > Control Panel >
Appearance and Themes > Display icon > Screen
Saver tab.
❏
In Windows 2000, select Start > Settings > Control
Panel > Display > Screen Saver tab.
■
■
Select a Power Scheme with low-power-use settings through
the operating system. Refer to the “Power” chapter in the
Software Guide on the Documentation Library CD.
Select Battery Optimized or Maximum Battery Mode in
Intel® SpeedStep (Windows 2000 only). Refer to the
“Power” chapter in the Software Guide on the Documentation
Library CD.
Hardware Guide
3–23
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
Storing a Battery Pack
If a notebook will be unused and not connected to external power
for 2 weeks or more, remove and store the battery pack.
CAUTION: To prevent damage to a battery pack, do not expose it to
high temperatures for an extended time.
Ä
High temperatures accelerate the self-discharge rate of a stored
battery pack. To prolong the charge of a stored battery pack, place
it in a cool, dry place.
Use the following table to estimate how long you can safely store
a battery pack. The storage times provided are based on a battery
pack that contains 50 percent of a full charge. A fully charged
battery pack can be safely stored for longer times; a battery pack
containing a lower charge can be safely stored for less time.
Calibrate a battery pack that has been stored for 1 month or more
before using it.
Temperature
Range (°F)
Temperature
Range (°C)
Safe Storage Time
Less than 1 month
No more than 3 months
1 year
115° to 140°
79° to 113°
32° to 77°
46° to 60°
26° to 45°
0° to 25°
3–24
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Packs
Disposing of a Used Battery Pack
ÅWARNING: There is a risk of fire and chemical burn if a battery pack
is handled improperly. Do not disassemble, crush, or puncture a battery
pack, or short the contacts on it. Do not expose a battery pack to
temperatures higher than 60°C (140°F) or dispose of a battery pack in
water or fire.
When a battery pack has reached the end of its useful life, do not
dispose of it in general household waste.
■
In Europe, dispose of or recycle battery packs by using the
public collection system or by returning them to HP, your
authorized HP partners, or their agents.
■
In other regions, refer to the Worldwide Telephone Numbers
booklet included with the notebook to contact an HP
Customer Care Center and request information about battery
pack disposal.
For more information about battery pack precautions and
disposal, and the complete text of governmental agency notices,
refer to the Regulatory and Safety Notices guide on the
Documentation Library CD.
Finding More Power Information
For more information about using Standby and Hibernation,
conserving power, setting power preferences, and using other
power management features, refer to the “Power” chapter in the
Software Guide on the Documentation Library CD.
Hardware Guide
3–25
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Hard Drive
Caring for Drives
Drives are fragile notebook components that must be handled
with care. The following cautions apply to all drives. Additional
cautions are included in the procedures to which they apply.
Ä■CAUTION: To prevent loss or damage to the notebook or a drive:
Handle a drive carefully. Do not drop it.
■
■
■
■
Excessive force can damage drive connectors. When you insert a
drive, use only enough force to seat the drive.
Do not spray a drive with cleaning fluid or other liquid or expose it
to temperature extremes.
Do not remove the primary hard drive (the hard drive in the hard
drive bay) except for repair or replacement.
Electrostatic discharge can damage electronic components. To
prevent electrostatic damage to the notebook or a drive:
❏
Before handling a drive, discharge yourself from static
electricity by touching a grounded metal object.
❏
❏
Avoid touching the connectors on a drive.
Refer to the Regulatory and Safety Notices on the
Documentation Library CD.
■
■
Avoid exposing a drive or a diskette to devices with magnetic
fields. Security devices with magnetic fields include airport
walk-through devices and security wands. The airport security
devices that check carry-on luggage, usually while it is placed
on a conveyor belt, use x-rays instead of magnetism and will not
damage a drive or a diskette.
If you mail a drive, ship it in packaging that protects it from shock,
vibration, temperature, and high humidity. Label the package
“FRAGILE.”
Hardware Guide
4–1
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard Drive
Hard Drive
This section discusses the primary hard drive of the notebook.
Identifying the Hard Drive Activity Light
The hard drive activity light turns on when the hard drive is
being accessed.
Hard drive activity light
4–2
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard Drive
Replacing the Primary Hard Drive
The hard drive in the hard drive bay is the primary hard drive.
To replace the primary hard drive:
1. Save your work, exit all applications, and shut down the
notebook. If you are not sure whether the notebook is off or
in Hibernation, briefly press the power button. If your work
returns to the screen, save your work, exit all applications,
and then shut down the notebook.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord and remove any battery packs.
4. Close the display and turn the notebook upside down.
5. Remove the hard drive retaining screw.
Removing the hard drive retaining screw
Hardware Guide
4–3
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard Drive
6. Slide the bottom half of the front bezel upward to create a
handle.
Extending the front bezel to create a handle
7. Pull the drive out of the bay.
Removing the hard drive from the hard drive bay
4–4
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard Drive
8. Insert a hard drive by sliding the hard drive into the bay until
the drive is seated.
Inserting the hard drive into the hard drive bay
9. Close the front bezel of the hard drive.
Closing the hard drive bezel
Hardware Guide
4–5
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Audio and Video
Using Audio Features
The notebook includes the audio components described in the
following table.
Audio components
Component
Description
Mute button
Mutes system volume.
1
2
Volume buttons
Adjust the system volume.
(continued)
Hardware Guide
5–1
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio and Video
Component
Description
Audio line-out jack
Connects optional, powered stereo
speakers, headphones, headset, or
television audio.
3
4
Microphone input jack
Connects an optional monaural
microphone.
Speaker
Produces system sound.
5
6
Microphone
Inputs single-channel sound.
Using the Audio Line-Out Jack
ÅWARNING: To reduce the risk of personal injury, adjust the volume
before putting on headphones or a headset.
CAUTION: To prevent possible damage to an external device, do not
plug a single-sound channel (monaural) connector into the audio
line-out jack.
Ä
The audio line-out jack is also used to connect the audio function
of an audio/video device such as a television or VCR.
When connecting a device to the audio line-out jack:
■
■
Use only a 3.5-mm stereo plug.
For best sound quality, use 24-ohm to 32-ohm headphones.
The internal speakers are disabled when a device is connected to
the audio line-out jack.
✎
Using the Microphone Input Jack
When an external microphone is connected to the notebook, the
notebook microphone is disabled.
When connecting a microphone to the microphone input jack, use
a monaural microphone with a 3.5-mm plug.
5–2
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio and Video
Adjusting the Volume
To adjust the volume, use any of the following controls:
■
Notebook volume buttons
❏
To mute or restore volume, press the mute button. You
can also mute or restore volume by simultaneously
pressing the volume up and volume down buttons.
❏
❏
To decrease the volume, press the volume down button.
To increase the volume, press the volume up button.
■
Windows Volume Control
❏
In Windows XP:
a. Select Start > Control Panel > Sounds, Speech and
Audio Devices > Sounds and Audio Devices.
b. Select the Volume tab.
c. Select the check box for Place Volume Icon in the
Taskbar.
d. Select the OK button.
❏
In Windows 2000: the Windows Volume Control icon is
displayed on the taskbar.
Volume can also be adjusted within some applications.
✎
Using Video Features
The notebook features an S-Video-out jack which connects the
notebook to an optional S-Video device, such as a television or
overhead projector.
The notebook can support one S-video device connected to the
S-video out jack while simultaneously supporting an image on
the notebook display or an external display attached to the
external monitor connector. The S-video-out connection usually
provides a higher quality image than a composite-video
connection.
Hardware Guide
5–3
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio and Video
To transmit video signals through the S-Video-out jack, you need
an S-Video cable, available from most electronics retailers. If you
are combining audio and video functions, such as playing a movie
from a DVD in an optional External MultiBay drive to a
television, you also need a standard audio cable, available from
most electronics retailers. Connect the audio cable to the external
device and to the audio line-out jack.
Using the S-Video-Out Jack
To connect a video device to the S-Video-out jack:
1. Plug either end of the S-Video cable 1 into the S-Video-out
jack on the notebook.
2. Connect the other end of the cable 2 to the video device as
instructed in the documentation included with the device.
Connecting a device to the S-Video-out jack
If the S-Video-out jack on the notebook is not accessible while
the notebook is docked, you can connect the device to the
S-Video-out jack on the optional Port Replicator.
✎
5–4
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio and Video
Changing the Video Mode
The default color television standard mode of the notebook is
NTSC. Color television standard modes vary even within regions.
However, NTSC is common in North America; PAL is common
in Europe, China, Africa, and the Middle East; NTSC-J is
common in Japan; and PAL-M is common in Brazil. Other South
and Central American regions may use NTSC, PAL, or PAL-M.
To change the color television standard mode from NTSC:
1. Access the ATI Display tab:
❏
In Windows XP, select Start > Control Panel.
Double-click the Display icon. Select the Settings tab,
select the Advanced button, and then select the ATI
Displays tab.
❏
In Windows 2000, select Start > Settings > Control
Panel. Double-click the Display icon, select the Settings
tab, select the Advanced button, and then select the ATI
Displays tab.
2. Enable the TV by selecting the Enable button, indicated by a
red triangle.
3. Select the TV Header, and then select the Format tab.
4. Select a television format either by name or by
Country/Region:
❏
To select a format by name, select Format, select a format
in the drop-down list, and then select OK.
❏
To select the default format for a region or country, select
Country/Region, select a location in the drop-down list,
and then select OK.
5. Select the Close button to close all opened dialog boxes.
6. At the prompt, restart the notebook.
Hardware Guide
5–5
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Communication Devices
Connecting a Modem Cable
A modem cable, which has a 6-pin RJ-11 connector at each end,
must be connected to an analog telephone line with, in some
countries, the use of a country-specific modem adapter. Modem
cables are provided with most notebooks, but they may also be
purchased separately from most electronics retailers. Some
notebooks may have been purchased without an internal modem.
WARNING: Connecting the notebook to a digital line can
permanently damage the modem. Immediately disconnect your modem
cable if it is accidentally connected to a digital line.
Å
CAUTION: Jacks for digital PBX systems might resemble analog
Ä
Ä
telephone jacks but are not compatible with the modem.
CAUTION: Built-in modems may not work with multiple phone lines
or a private branch exchange (PBX). They cannot be connected to a
coin-operated telephone, and they do not work with party lines. Some
of these connections may result in excess electrical voltage and could
cause a malfunction in the internal modem. Check your telephone line
type before connecting your phone line.
Hardware Guide
6–1
Download from Www.Somanuals.com. All Manuals Search And Download.
Communication Devices
If the modem cable contains noise suppression circuitry, which
prevents interference from TV and radio transmissions, orient the
circuitry end of the cable toward the notebook.
RJ-11 modem cable with noise suppression circuitry
6–2
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Communication Devices
Connecting the RJ-11 Modem Cable
To connect an RJ-11 modem cable:
1. Plug the modem cable 1 into the RJ-11 jack on the notebook.
To reduce the risk of electrical shock, fire, or damage to the
Å
equipment, do not plug a telephone cable into the RJ-45
network jack.
2. Plug the other end of the cable 2 into the RJ-11 telephone
jack.
Connecting the RJ-11 modem cable
For more information about using the modem or about using AT
commands and dial modifiers, refer to the Modem and
Networking guide or the Modem Command Guidelines
(Advanced Users Only), provided in English on the
Documentation Library CD.
Hardware Guide
6–3
Download from Www.Somanuals.com. All Manuals Search And Download.
Communication Devices
Using a Country-Specific Adapter Cable
Telephone jacks vary by country. To use the modem and the
RJ-11 cable outside the country in which you purchased the
notebook, you must obtain a country-specific modem adapter.
Refer to the Modem and Networking guide on the Documentation
Library CD for more details about using your notebook
internationally.
To connect the modem to an analog telephone line that does not
have an RJ-11 telephone jack:
1. Plug the modem cable into the RJ-11 jack on the notebook 1.
To reduce the risk of electrical shock, fire, or damage to the
Å
equipment, do not plug a telephone cable into the RJ-45
network jack.
2. Plug the modem cable 2 into the country-specific
modem adapter.
3. Plug the country-specific modem adapter 3 into the
telephone jack.
Connecting a modem cable using a modem adapter
6–4
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Communication Devices
Connecting a Network Cable
A network cable has an 8-pin RJ-45 connector at each end. A
network cable is provided with most notebooks, but may also be
purchased separately from most electronics retailers. If the
network cable contains noise suppression circuitry, which
prevents interference from TV and radio transmissions, orient the
circuitry end of the cable toward the notebook.
RJ-45 network cable with noise suppression circuitry
Hardware Guide
6–5
Download from Www.Somanuals.com. All Manuals Search And Download.
Communication Devices
To connect the network cable:
1. Plug the network cable 1 into the RJ-45 jack on
the notebook.
2. Plug the other end of the cable 2 into a network jack.
Connecting a network cable
3. Start or restart the notebook.
See Windows Help for information about setting up and using
LAN connections. Select Start > Help and Support. Contact your
network administrator for network information.
✎
6–6
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Communication Devices
Linking to an Infrared Device
The notebook is IrDA-compliant—4-Mbps standard—and can
communicate with another infrared-equipped device that is also
IrDA compliant.
The infrared port supports both low-speed connections of up to
115 Kbps and high-speed connections of up to 4 Mbps. Infrared
performance may vary depending on the performance of infrared
peripherals, distance between infrared devices, and applications
used.
Infrared signals are sent through an invisible beam of infrared
light and require an unobstructed line-of-sight path.
Linking to an infrared device
Hardware Guide
6–7
Download from Www.Somanuals.com. All Manuals Search And Download.
Communication Devices
Setting Up an Infrared Transmission
For information about using infrared software, refer to your
operating system Help file.
To set up infrared devices for optimal transmission:
■
■
Prepare the infrared ports on both devices for transmission.
Position the devices so that their infrared ports face one
another at a distance no greater than 1 meter (3.3 feet).
■
Position the ports so that they face one another directly.
Because the maximum capture angle is 30 degrees, the ports
must be aligned no more than 15 degrees off-center.
■
■
■
Shield the ports from direct sunlight, flashing incandescent
light, and energy-saving fluorescent light.
Be sure that no signals from remote control or other wireless
devices, such as headphones or audio devices, aim at a port.
During the transmission, do not move either device and do
not allow objects or movement to disrupt the beam.
Avoiding Standby with Infrared
Standby is not compatible with infrared transmission. If the
notebook is in Standby, an infrared transmission cannot be
initiated. If Standby is initiated during an infrared transmission,
the transmission stops. To resume from Standby, press the power
button. The transmission resumes when the notebook resumes
from Standby. However, any program that was using the infrared
transmission when Standby was initiated may not continue at the
point it was stopped. For example, if a program was printing
when Standby was initiated, the program resumes transmission
after the notebook resumes, but the print job may not resume.
6–8
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Communication Devices
Using Wireless LAN
The notebook provides internal wireless LAN supported through
an optional Mini PCI device. For more information on using your
internal wireless LAN, refer to the wireless LAN documentation
included with the notebook.
Using Bluetooth
The notebook provides internal wireless Bluetooth connectivity
supported through an optional integrated module. For more
information on using your internal Bluetooth module, refer to the
wireless Bluetooth documentation included with the notebook.
Hardware Guide
6–9
Download from Www.Somanuals.com. All Manuals Search And Download.
7
External Devices
The jacks and connectors described in this guide support standard
external devices.
■
For information about which jack or connector to use, refer to
the documentation included with the device.
■
For information about installing or loading any software,
such as drivers, that are required by the device, refer to the
documentation included with the device.
To connect a standard external device to the notebook:
1. Turn off the notebook.
2. If you are connecting a powered device, turn off the device.
3. Connect the device to the connector on the notebook.
4. If you are connecting a powered device, plug the device
power cord into a grounded electrical outlet.
5. Turn on the device.
6. Turn on the notebook.
To disconnect a standard external device from the notebook, turn
off the device, then disconnect the device from the notebook.
Hardware Guide
7–1
Download from Www.Somanuals.com. All Manuals Search And Download.
External Devices
Connecting a Monitor or Projector
To connect an external monitor or projector to the notebook,
insert the monitor cable into the external monitor connector on
the back of the notebook.
If a properly connected external monitor or projector does not
display an image, try pressing the Fn+F4 hotkey to switch the
image to the monitor.
✎
Using a USB Device
Two Universal Serial Bus (USB) connectors can be used to
connect external USB 2.0 and USB 1.1 devices, such as a USB
keyboard, mouse, drive, printer, scanner, hub, or External
MultiBay to the notebook.
The notebook has a USB connector 1 and a USB connector that
also connects an optional powered External MultiBay 2. The
USB connectors support USB 2.0 and USB 1.1 devices.
USB connectors on the rear panel
7–2
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
External Devices
USB hubs can be connected to a USB connector on the notebook
or on an optional Port Replicator or to other USB devices. Hubs
support varying numbers of USB devices and are used to increase
the number of USB devices in the system. Powered hubs must be
connected to external power. Unpowered hubs must be connected
either to a USB connector on the notebook or to a port on a
powered hub.
A USB device functions in the same way as a comparable
non-USB device, with one exception. By default, USB devices do
not function unless an operating system that supports USB is
loaded.
Some USB devices may require additional support software,
which is usually included with the device. For more information
and software installation instructions, refer to the documentation
included with the device.
Enabling USB Legacy Support
You must enable USB legacy support to:
■
■
■
Use a USB keyboard, mouse, or hub connected to a USB
connector on the notebook during startup.
Use a USB keyboard, mouse, or hub that is used in a
non-Windows application or utility.
Boot from an optional External MultiBay.
To enable USB legacy support:
1. Turn on or restart the notebook.
2. Press F10 while the F10 = ROM Based Setup message is
displayed in the lower left corner of the screen.
❏
❏
To change the language, press F2.
For navigation instructions, press F1.
3. Select Advanced menu > Device Options.
Hardware Guide
7–3
Download from Www.Somanuals.com. All Manuals Search And Download.
External Devices
4. Select Enable USB legacy support.
5. To save your preference and exit Computer Setup, select
File > Save Changes and Exit, and then follow the
instructions on the screen.
Connecting an Optional External
MultiBay
An External MultiBay connects to the notebook by way of the
self-powered USB connector and enables you to use MultiBay
drives. For more information about the External MultiBay, refer
to the documentation that is included with the device.
Connecting an External MultiBay
7–4
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
External Devices
Connecting an Optional Cable Lock
The purpose of security solutions is to act as a deterrent. These
solutions do not prevent the product from being mishandled or
stolen.
✎
To install a security cable:
1. Loop the security cable around a secured object.
2. Insert the cable lock key into the cable lock.
3. Insert the cable lock into the security cable slot.
4. Turn the key and remove it from the cable lock.
Connecting a security cable
Hardware Guide
7–5
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Hardware Upgrades
To order hardware or learn more about upgrades and accessories,
Telephone Numbers booklet included with the notebook to
contact an HP Customer Care Center.
For information about obtaining and installing software updates
and upgrades, refer to the “Software Updates and Restorations”
chapter in the Software Guide on the Documentation Library CD.
Using Optional PC Cards
A PC Card is a credit card-sized accessory designed to conform
to the standard specifications of the Personal Computer Memory
Card International Association (PCMCIA).
■
The notebook supports 32-bit (CardBus) and 16-bit
PC Cards.
■
■
The notebook supports one Type I card or one Type II card.
Zoomed video PC Cards are not supported.
CAUTION: If you install all of the software or any of the enablers
provided by a PC Card manufacturer, you may not be able to use other PC
Cards. If you are instructed by the documentation included with your PC
Card to install device drivers:
Ä
■
■
Install only the device drivers for your operating system.
Do not install other software, such as card services, socket services,
or enablers, that may also be supplied by the PC Card
manufacturer.
Hardware Guide
8–1
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Upgrades
Inserting a PC Card
Ä■CAUTION: To prevent damage to the connectors:
Use minimal pressure when inserting a PC Card into a
PC Card slot.
■
Do not move or transport the notebook while a PC Card
is inserted.
To insert a PC Card:
1. Hold the PC Card label-side up with the connector facing the
notebook.
2. Gently slide the card into the slot until the card is seated.
Inserting a PC Card into the PC Card slot
8–2
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Upgrades
Removing a PC Card
CAUTION: To prevent loss of work or system lockup, stop the PC Card,
according to the instructions that follow, before removing it.
Ä
1. Stop the PC Card:
❏
❏
In Windows XP, select the Safely Remove Hardware
icon on the taskbar, then select the PC Card. (To display
the Safely Remove Hardware icon, right-click the taskbar
and select Show Hidden Icons.)
In Windows 2000, select the Unplug or Eject icon on the
taskbar, then select the PC Card you plan to remove. A
message is displayed when the card can be safely
removed.
2. Press the PC Card eject button 1.
3. Gently pull out the card 2.
Removing a PC Card
An inserted PC Card uses power even when not in use. To
conserve power, stop or remove a PC Card when you are not
using it.
✎
Hardware Guide
8–3
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Upgrades
Using Optional SD Cards
Secure Digital (SD) Cards are removable postage stamp-sized
compact flash storage devices that provide a convenient method
of storing data and sharing it with other devices such as PDAs,
cameras, and other notebooks and PCs that use SD Cards.
Inserting an SD Card
Ä■CAUTION: To prevent damage to the connectors:
Use minimal pressure when inserting an SD Card into an SD Card
slot.
■
Do not move or transport the notebook while an SD Card is
inserted.
To insert an SD Card:
1. Insert the SD Card into the SD slot.
2. Slide the card firmly into the slot until the card clicks into
place.
Inserting an SD Card into the SD slot
8–4
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Upgrades
Removing an SD Card
CAUTION: To prevent loss of work or system lockup, stop the SD Card
before removing it.
Ä
To remove an SD Card:
1. Close all files and applications that are using the SD Card.
2. Stop the SD Card:
❏
In Windows XP, select the Safely Remove Hardware
icon in the taskbar, then select the SD Card. (To display
the Safely Remove Hardware icon, right-click the taskbar
and select Show Hidden Icons.)
❏
In Windows 2000, select the Unplug or Eject icon in the
task bar, then select the SD Card you plan to remove.
A message is displayed when the card can be safely
removed.
CAUTION: Attempting to remove the SD Card without pressing in to
unseat it first might damage the connectors in the SD Card slot.
Ä
3. Gently press in on the SD Card 1 to release it.
4. Pull the SD Card 2 from the slot.
Ejecting an SD Card from the SD slot
Hardware Guide
8–5
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Upgrades
Adding and Upgrading Memory
Modules
ÅWARNING: The memory compartments are the only user-accessible
internal compartments on the notebook. All other areas that require a
tool to access should be opened only by an HP authorized service
provider.
ÅWARNING: Failure to unplug the power cord and remove all battery
packs before installing a memory expansion board can damage the
equipment and expose you to the risk of electrical shock.
CAUTION: Electrostatic discharge (ESD) can damage electronic
components. Before beginning any procedure, ensure that you are
discharged of static electricity by touching a grounded metal object. For
more information, refer to the Regulatory and Safety Notices guide on
the Documentation Library CD.
Ä
The notebook has 2 memory slots. The primary memory slot is
located under the keyboard. The primary memory slot is
populated at the factory. The memory expansion slot is located on
the bottom of the notebook.
The memory capacity of the notebook can be upgraded first by
adding a memory module to the expansion slot and then by
upgrading the memory module in the primary memory slot.
Adding a Memory Expansion Module
To add a memory expansion module:
1. Save your work, exit all applications, and shut down the
notebook. If you are not sure whether the notebook is off or
in Hibernation, briefly press the power button. If your work
returns to the screen, save your work, exit all applications,
and then shut down the notebook.
2. Disconnect all external devices connected to the notebook.
8–6
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Upgrades
3. Disconnect the power cord.
4. Turn the notebook upside down.
5. Remove any battery packs from the notebook.
6. Remove the screw 1 from the memory expansion slot cover.
7. Tilt the expansion slot cover 2 away from the notebook.
Removing the expansion slot cover
8. Remove the memory expansion slot cover.
Hardware Guide
8–7
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Upgrades
9. Insert the memory expansion module:
a. Align the keyed (notched) edge of the module 1 with the
keyed area in the expansion slot.
b. Press the module into the slot from a 45-degree angle
until it is seated, then push the board downward 2 until
the retention clips snap into place.
Inserting a memory expansion module
8–8
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Upgrades
10. Insert the tabs on the expansion slot cover into the recesses in
the expansion slot.
11. Replace the expansion slot cover over the expansion module
compartment 1.
12. Replace the expansion slot cover screw 2.
Replace the expansion slot cover
13. Replace the battery packs.
14. Reconnect AC power and external devices.
15. Restart the notebook.
Hardware Guide
8–9
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Upgrades
Upgrading the Memory Module in the
Primary Memory Slot
To upgrade the memory module in the primary memory slot:
1. Save your work, exit all applications, and shut down the
notebook. If you are not sure whether the notebook is off or
in Hibernation, briefly press the power button. If your work
returns to the screen, save your work, exit all applications,
and then shut down the notebook.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Remove any battery packs from the notebook.
5. Remove the keyboard screw 1 from the bottom of the
notebook. A keyboard icon is located next to the keyboard
screw.
6. Remove the two Quick Launch button bezel screws 2.
Removing the keyboard and Quick Launch button bezel screws
8–10
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Upgrades
7. Using a fingernail or small flat tool, remove the Quick
Launch button bezel located above the keyboard.
Removing the Quick Launch button bezel
8. Remove the keyboard.
Removing the keyboard
Hardware Guide
8–11
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Upgrades
9. Remove the existing memory module:
a. Pull away the retention clips 1 on each side of the
module. (The module tilts upward.)
b. Lift the edge of the memory expansion module, then
gently pull it out of the slot 2.
Removing the existing memory module
To protect a memory module after it has been removed, place it in
a static-safe container.
✎
8–12
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Upgrades
10. Insert the new memory module:
a. Align the keyed (notched) edge of the module with the
keyed area in the expansion slot.
b. Press the module 1 into the slot from a 45-degree angle
until it is seated, then push the module 2 downward until
the retention clips snap into place.
Inserting the new memory module
11. Replace the keyboard.
12. Replace the Quick Launch button bezel.
13. Replace the keyboard and Quick Launch button bezel screws
located on the bottom of the notebook.
14. Replace the battery packs.
15. Reconnect external AC power and external devices.
16. Restart the notebook.
Hardware Guide
8–13
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Upgrades
Effects of Increasing Memory
When memory increases, the operating system increases the hard
drive space reserved for the Hibernation file.
If you experience problems with Hibernation after memory has
been increased, verify that your hard drive has enough free space
to accommodate a larger Hibernation file.
■
To display the amount of RAM in the system:
❏
❏
Press Fn+esc.
In Windows XP, select Start > Control Panel >
Performance and Maintenance > System > General tab.
❏
In Windows 2000, select Start > Settings > Control
Panel > System > General tab.
■
■
To display the amount of free space on your hard drive,
double-click the My Computer icon on the desktop, then
select your hard drive. Information about the space on the
drive is displayed in a status bar at the bottom of the window.
To display the amount of space required by the Hibernation
file:
❏
In Windows XP, select Start > Control Panel >
Performance and Maintenance > Power Options icon >
Hibernate tab.
❏
In Windows 2000, select Start > Settings > Control
Panel > HP Power > Hibernation tab.
The free space on your hard drive and the size of the Hibernation
file should match or exceed the amount of memory in your
system.
8–14
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Specifications
The information in this chapter might be helpful if you plan to use
or transport the notebook internationally or in extreme
environments.
Use only compatible AC adapters and battery packs with the
notebook. For additional information, visit the HP Web site at
booklet included with your notebook to contact an HP Customer
Care Center.
✎
Operating Environment
Factor
Metric
U.S.
Temperature
Operating (not writing optical)
Operating (writing optical)
Nonoperating
0°C to 35°C
5°C to 35°C
–20°C to 60°C
32°F to 95°F
41°F to 95°F
–4°F to 140°F
Relative humidity (noncondensing)
Operating
10% to 90%
5% to 95%
10% to 90%
5% to 95%
Nonoperating
Maximum altitude (unpressurized)
Operating
–15 m to 3,048 m
–50 ft to 10,000 ft
Nonoperating
–15 m to 12,190 m –50 ft to 40,000 ft
Hardware Guide
9–1
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Rated Input Power
Input Power
Rating
Operating voltage
100 to 120/220 to 240 V ac RMS
1.6/0.8 A RMS
Operating current
Operating frequency range
When powered by a DC source
50 to 60 Hz AC
18.5V MAX
This product is designed for IT power systems in Norway
with phase-to-phase voltage not exceeding 240 Vrms.
✎
Modem Specifications
This notebook has been tested and found to comply with the
limits for a Class B digital device. For additional governmental
agency information, refer to the Regulatory and Safety Notices
guide on the Documentation Library CD.
Factor
Specification
Temperature
Operating
0°C to 75°C (32°F to 167°F)
Storage
–40°C to 75°C (–40°F to 167°F)
Relative humidity (noncondensing)
Operating
10% to 90%
Nonoperating
Interfaces
5% to 95% @ 39°C (5% to 95% @ 102°F)
Communications
connector
Standard RJ-11
connector
+3.3 volts 5%, +5 volts 5%
Power
Requirements
9–2
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
AC adapter, disconnecting 3–1
AC power connector 1–7
adapter, modem 6–4
Aircraft Power Adapter (optional)
3–12, 3–18
conserving power 3–22
low-battery condition 3–16
monitoring charge of 3–13
airport security devices 4–1
analog vs. digital line 6–1
antennae 1–6
storing 3–1, 3–24
type 3–2
battery pack, primary
inserting 3–3
applications key 1–3
audio devices, connecting external
5–2
audio line-out jack 1–4, 5–2
Automobile Power
Adapter/Charger (optional)
3–12, 3–17
B
battery bay, primary 1–9
battery charge information
displays
hotkey 2–5
conserving 3–22
in Windows 3–14
increasing accuracy 3–13
interpreting 3–14
running notebook on 3–1, 3–2
See also battery pack
battery power gauge 1–9
battery Quick Check 3–15
battery release latch 1–9
on battery pack 3–15
battery connector, travel 1–8
battery light 1–10, 3–12, 3–16
Hardware Guide
Index–1
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Bluetooth 2–9, 6–9
Bluetooth label, location 1–11
bottom components 1–8
buttons
mute 2–9, 5–1
external monitor 1–7
USB 1–7
PC Card eject 1–4, 8–3
pointing stick 1–1, 2–1
power 1–2
Presentation Mode 2–9
Quick Launch 1–2, 2–9
Quick Lock 2–9
country-specific modem cable
critical low-battery condition 3–17
TouchPad 1–1, 2–2
volume control 5–1
Wireless On/Off 2–9
display
C
cable slot, security 1–5
cable, modem 6–1, 6–3
cables
7–2
modem 6–1
drive media affected by airport
security 4–1
calibration, battery pack 3–18
caps lock light 1–10
charge sequence 3–11
compartments
memory expansion 1–9
Mini PCI (Peripheral
Component Interconnect) 1–9
primary memory 1–3
Computer Setup
affected by airport security 4–1
connectors 4–1
shipping 4–1
E
enabling USB legacy support
7–3
navigating 2–12
electrostatic discharge (ESD) 4–1
environmental specifications 9–1
ESD (electrostatic discharge) 4–1
exhaust vent 1–5
external devices (optional) 7–1
external monitor connector 1–7
navigating in 7–3
connecting external devices 7–1
Index–2
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
External MultiBay (optional) 7–4
External MultiBay connector 1–7
humidity specifications 9–1
I
F
Fn key 1–3
linking to a device 6–7
front components 1–6
function keys 1–3
H
hard drive
J
jacks
caring for 4–1
inserting 4–5
removing 4–3
replacing 4–3
retaining screw 4–3, 4–6
hard drive activity light 1–10, 4–2
hard drive bay 1–5
Hibernation
S-Video-out 5–3
and low-battery conditions
3–17
disabling 3–20
enabling 3–17, 3–22
exiting 1–2
file space requirements for
8–14
initiating for battery removal
3–5
keyboard, USB 7–2
using embedded 2–10
keys
applications 1–3
function 1–3
initiating to conserve power
3–23
L
labels 1–11
hotkeys
LAN, wireless 6–9
latches
quick reference to commands
2–5
battery release 1–9
display release 1–6
left-side components 1–4
using with external keyboard
2–8
hub, USB 7–3
Hardware Guide
Index–3
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
lights
battery 1–10, 3–12
monitor connector, external
mute button 5–1
caps lock 1–10
hard drive activity 1–10, 4–2
num lock 1–10
power/Standby 1–10
scroll lock 1–10
N
wireless on/off 1–10
low-battery conditions, identifying
3–16
noise suppression circuitry 6–2,
6–5
num lock light 1–10
disabling 2–12
M
magnetic fields, protecting drives
from 4–1
maximum altitude 9–1
memory
O
adding memory expansion
board 8–6
expansion compartment 8–6
primary slot 1–3, 8–6
upgrading primary board 8–10
memory expansion compartment
1–9
microphone, internal 1–6, 5–2
Mini PCI (Peripheral Component
Interconnect), compartment 1–9
Modem and Networking guide
6–3, 6–4
operating frequency range 9–2
overhead projector (optional)
external monitor connector 1–7
P
5–5
modem approval label, location
PC Card
1–11
inserting 8–2
stopping 8–3
zoomed video 8–1
PC Card eject button 1–4
PC Card slot 1–4
modem cable 6–1, 6–3
Modem Command Guidelines
(Advanced Users Only) 6–3
modem country-specific adapter
6–4
Index–4
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
peripherals, connecting and
disconnecting 7–1
Q
Quick Check, battery 3–15
pointing stick
QuickLock button 2–9
buttons 1–1, 2–2
location 1–1, 2–1
pointing stick cap, changing 2–2
Port Replicator (optional)
charging a battery pack with
3–12
RAM (random access memory)
See memory
rated input power 9–2
release latches
docking connecter 1–8
using the travel battery with
3–12
power
RJ-11 jack 1–7
rated input 9–2
switching between AC and
battery 3–1
S
See also battery power
power button 1–2
power connector 1–7
Power Meter (Windows) 3–14
power/Standby light 1–10
powered USB 1–7
powered USB hubs 7–3
preferences
shortcut keys
quick reference 2–5
using on external keyboard 2–8
slots
external keypad 2–12
pointing device 2–4
power 3–16, 3–23
security 2–9
Presentation Mode button 2–9
primary battery pack 3–3
Product Key, location 1–11
product number, location 1–11
projector (optional), connecting
7–1
PC Card 1–4, 8–2
SD Card 1–4, 8–4
security cable 1–5
speaker, internal
audio line-out jack 1–4
identifying 1–4, 5–2
protecting the notebook from
damage 4–1
Hardware Guide
Index–5
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
speakers, external (optional)
audio line-out jack 5–2
connecting 5–2
travel battery pack
Standby
and low-battery conditions
3–17
exiting 1–2
initiating to conserve power
3–23
3–8
3–10
traveling with the notebook
Aircraft Power Adapter
(optional) 3–12, 3–18
Adapter/Charger (optional)
initiating with hotkey 2–5
using with infrared 6–8
Standby light 1–10
S-Video, connecting cable 5–4
switching display and image 2–5,
7–2
system information 2–5
8–2, 8–4
T
telephone (RJ-11) jack, location
1–7
television (optional)
changing color mode 5–5
connecting audio 5–4
connecting video 5–4
S-Video-out jack 1–7, 5–4
switching image to or from 2–5
temperature, storage for battery
packs 3–24
U
USB
USB devices 7–3
USB hubs 7–3
top components 1–2
TouchPad
location 1–1, 2–2
using 2–3
TouchPad buttons 1–1, 2–2
V
VCR (optional)
connecting audio 5–4
connecting video 1–7, 5–3
switching image to or from 2–5,
7–2
Index–6
Hardware Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
vents
exhaust 1–5
Windows applications key 1–3
Windows logo key 1–3
intake 1–9
video devices (optional)
S-Video-out jack 1–7, 5–4
switching image to or from 2–5,
7–2
wireless LAN, using 6–9
Wireless On/Off button 1–2, 2–9
wireless on/off light 1–10
WLAN label, location 1–11
volume controls 5–1
Hardware Guide
Index–7
Download from Www.Somanuals.com. All Manuals Search And Download.
|