LCD TV
46 VLE 8270 BL
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents--------------------------------------------------------------------------------------------------------------------------------------
60- operAtion-usinG-externAl-
DeviCes
60 DIGI LINK
-
60 The DIGI LINK functions on your television
61 Device operation
62 High definition HD ready
62 Connection options
63 Connecting external devices
64 Using a DVD player, DVD recorder,
video recorder or set-top box
64 Headphones
65 Hi-fi System
67- operAtion-As-A-pC-monitor
-
67 Connecting a PC
67 Selecting presets for the PC
67 Settings for PC mode
68- operAtion-witH-A-Common-
interFACe
-
68 What is a Common Interface?
68 Inserting the CA module
68 Access control for CI module and
smart card
69- speCiAl-settinGs
69 Searching for digital television channels
from a satellite automatically
-
70 Searching for digital television channels
from a satellite manually
70 LNB settings
71 Settings for motorised antennas
(DiSEqC 1.2)
74 Searching for digital terrestrial
TV channels automatically
75 Searching for digital terrestrial
TV channels manually
76 Tuning analogue television channels
77 Changing stored analogue channels
79- inFormAtion
-
79 Displaying signal information
80 Technical data
81 Service information for dealers
81 Environmental note
82 Troubleshooting
-3
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
setup-AnD-sAFetY-------------------------------------------------------------------------------------------------------
7
Please note the following instructions when
setting up the television set:
Make sure the power cord or the power sup-
ply unit (if provided) are not damaged.
7
7
7
This television is designed to receive and dis-
Only operate the television with the power
supply/power cord provided.
play video and audio signals.
All other uses are expressly prohibited.
Thunderstorms are a danger to all electrical
devices. Even when the television is switched
off, it can be damaged by a lightning strike to
the mains or the antenna. Always disconnect
the mains and antenna plugs during a storm.
7
The ideal viewing distance is five times the
diagonal screen size.
7
Light falling on the screen impairs picture
quality.
7
7
Use a damp, soft cloth to clean the screen.
Do not use water with soap or detergent.
7
To ensure the device is always adequately
ventilated, make sure there is sufficient space
between the television set and nearby furni-
ture.
Only clean the housing of your television set
with the cloth provided. Do not use water with
soap or detergent.
7
The television is designed for use in dry rooms.
7
If you do use it outdoors, make sure it is pro-
tected from moisture such as rain or splashing
water.
When deciding where to put the device, re-
member that furniture is often coated with
various types of varnish and plastic. Many of
these contain chemicals which can corrode
the feet of the device, leaving marks on the
surface of the furniture which can be difficult
or impossible to remove.
Never expose the television set to moisture.
7
Do not place any vessels such as vases on the
television, as they may spill liquid, thus present-
ing a safety risk.
7
The screen of your LCD/LED television meets
the highest quality standards and has been
checked for pixel faults.
Despite the great care taken in manufacturing,
technological reasons make it impossible to
completely discount the possibility that some
pixels may be faulty.
Provided they are within the thresholds speci-
fied by the DIN norm, pixel faults of this kind
cannot be regarded as a defect as defined by
the warranty.
7
Place the television on a hard, level surface.
7
Do not place any objects such as newspapers
on the television or put cloth or similar items
under it.
7
Do not place the television close to heating
units or in direct sunlight, as this will impair
cooling.
7
Heat build-up can be dangerous and shortens
the service life of the television. For reasons of
safety, have a repairman remove any dirt in
the television from time to time.
7
To ensure fires do not occur,
always keep candles and
other open flames away from
the device.
7
Never open the television under any circum-
stances. Warranty claims are excluded for
damage resulting from improper handling.
-4
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
setup-AnD-sAFetY-------------------------------------------------------------------------------------------------------
7
Do not connect any other equipment while the
device is switched on. Also switch off other
equipment before connecting it.
7
Do not plug in the power cord of the device
until you have connected the external equip-
ment and the antenna.
7
Make sure the mains plug is freely accessible.
7
Do not expose the batteries to excessive heat
such as direct sunlight, fire, etc.
7
Do not use old and unused batteries together.
7
Only replace the exhausted batteries with
those having the same model, value and prop-
erties.
7
By ensuring proper disposal of these batteries,
you will have contributed in prevention of po-
tential hazards on the environment and human
health that may arise from inappropriate dis-
posal of the batteries.
Caution:
7
If you plan on using a wall bracket for your
television, make sure you read the assembly
manual for the wall bracket or have a spe-
cialist assemble it.
7
When purchasing the wall bracket, make
sure that all the fastening points on the televi-
sion are also on the wall bracket and that
they are all used when mounting it.
-5
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
GenerAl-inFormAtion----------------------------------------------------------------------------------
7
You can record any digital TV channels you
special-features-of-your-
choose.
-television-set
The TV channels are converted by the televi-
7
You can receive and watch digital TV chan-
nels using your television set (via DVB-S, DVB-T
sion and saved on an external data medium
which is connected to the USB socket.
and DVB-C) – including High Definition pro-
The saved programmes can be called up and
grammes (HD). However, the reception of digi-
played from the archive on the external data
tal TV channels in HD is currently limited to a
medium at any time.
few countries in Europe.
You can also play a programme from the
archive while recording another.
More information on recording and playing
TV programmes can be found from page 41.
7
Although this television set complies with the
current DVB-S, DVB-T and DVB-C standards
(status: August 2010), the compatibility with
future DVB-S satellite transmissions as well
as terrestrial DVB-T and DVB-C cable pro-
grammes cannot be guaranteed.
7
Your Grundig television and 3D shutter glasses
can provide the reality of the cinema when
you watch 3D movies in your home.
This TV uses state-of-the-art LED technology to
give you the best experience 3D has to offer.
To join the 3D world, you just need to put on
the Grundig 3D glasses.
7
Your television set can receive and process
all analogue and non-encrypted digi-
tal TV channels. The television set is also
equipped with digital and analogue receivers.
7
Smart Inter@ctive TV feature provides your TV
with the Internet services and pages when it is
connected to the Internet. You can visit popu-
lar video and photo sharing sites as well as
social networks. And you can watch TV and
listen to radio on web.
7
The electronic TV guide (for digital channels
only) informs you about any schedule changes
at short notice, and provides an overview of
all the broadcasters' schedules for the next few
days. Detailed information on the individual
television programmes are – when provided
by the broadcasting station – are also avail-
able in the electronic TV guide.
7
DLNA feature allows you to use a wired or
wireless local network to access your content
that were recorded with DLNA compatible de-
vices we use at our daily lives such as a PC,
mobile phone or NAS (Network Attached
Storage) which are operated as DMS (Digital
Medial Server). Thanks to DMR feature, when
DLNA application has been started, you can
automatically start and stop media playing on
devices with DMC feature.
7
You can connect various data media, such as
an external hard drive, a USB memory stick or
a digital camera, to the USB socket. Using the
file browser, you can then select and play the
file formats of your choice (for example, MP4,
MP3 or JPEG data).
7
Using the time shift function, you can quickly
and easily pause a programme using the re-
mote control and resume it at a later stage.
The programme is recorded in an external
data medium.
7
Devices that contain and serve video, music
or image files are called Server. This television
receives video, music and image files from the
server through home network, allowing you to
access and play such media even when your
television is located in a different room then
the server. A DLNA compatible device such as
a PC, mobile phone, NAS or a NAS-like (Net-
work attached storage) device which operates
as a DMS (Digital Media Server) is required
in order to use home network.
-6
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
GenerAl-inFormAtion----------------------------------------------------------------------------------
7
As switching off the television set does not
receiving-digital-channels
completely disconnect it from the mains, pull
7
You require a satellite antenna to receive
out the plug to disconnect it from the mains
digital satellite channels (DVB-S).
completely.
Your TV supports SCR system (Satellite Chan-
7
nel Router). If your antenna installation is
equipped with an Single Cable Distribution
multiswitch, all television sets which are con-
nected on this antenna can receive the televi-
sion channels stand-alone.
If the device is equipped with a power switch,
switching it off using this switch will be suffi-
cient. The energy consumed by the television
set is reduced to virtually 0 W.
7
In standby mode, the television set uses very
little energy. However, it may be necessary
to leave the television set in standby mode
for certain functions (for example automatic
switch-on and switch-off and for timer func-
tions).
7
7
7
You require a digital roof antenna or indoor
antenna (passive or active indoor antenna
with its own power supply) to receive digital
television channels (DVB-T).
If you wish to receive digital television chan-
nels via your cable system (DVB-C), the an-
tenna cable for your cable operator must be
connected to the television set.
7
The television set uses less energy when the
brightness is reduced.
notes-on-still-images
Unlike analogue broadcasting, not every
channel has its own transmission frequency.
Instead, several channels are grouped into
what are known as bouquets on a regional or
national level. You can find the current trans-
mission information on teletext from various
broadcasters, or by consulting a current TV
guide or the Internet.
Watching the same image for a long time on the
screen may cause a still image remains feebly on
the background. Feeble image(s) on the back-
ground is originated from LCD/LED technology
and does not require any action under guaran-
tee. To avoid such cases and/or minimize the
impact, you may observe the tips below.
7
7
Various digital television channels from private
broadcasters are encrypted (DVB-S, DVB-T
and DVB-C). Watching these channels and
the recording and playback functions are only
possible with the appropriate CI module and
a SmartCard. Ask your specialist dealer.
The range of channels available from the pub-
lic broadcasting institutions (ARD with EinsEx-
tra, EinsFestival or ZDF with ZDF Info and all
third party broadcasters) are not encrypted
and can be received without a SmartCard.
Do not allow the same TV channel to stay on
the screen for a very long time. Channel logos
may cause this situation.
7
Do not allow the images, which are not full
screen, to constantly stay on the screen; if not
streamed in full screen format by the broad-
caster, you can convert the images to full
screen by changing picture formats.
7
Higher brightness and/or contrast values will
lead this impact to appear faster; therefore,
you are recommended to watch your TV in the
lowest brightness and contrast levels.
important-notes-on-
environmental-protection
7
The following information will help you to save
resources – and money as well.
7
If you are not using your television set for
several days, you should pull out the mains
plug for environmental and safety reasons.
This way the television does not consume any
electricity.
-7
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ConneCtion-AnD-prepArAtion------------------------------------------------
Connecting-the-antenna-and-power-cord
2
3
1
1
To receive digital satellite channels (DVB-S),
connect the satellite antenna cable to the
antenna socket »sAtellite« on the televi-
sion set.
note:
7
When connecting an indoor antenna you
may have to try it out at different positions
until you get the best reception.
3
Plug the power cord into a wall socket.
And/or:
note:
2a To receive terrestrial digital broadcasters
(DVB-T) connect the cable for the rooftop
or indoor antenna (passive or active indoor
antenna with its own power supply) to the an-
tenna socket »Ant-in« on the television set;
7
Do not plug in the power cord of the device
until you have connected the external equip-
ment and the antenna.
7
Only use the power cord supplied to connect
or
the television set to a suitable earthed safety
socket.
2b To receive digital cable channels (DVB-C)
connect the cable for the rooftop antenna
to the antenna socket »Ant- in« on the
television set;
7
Do not use an adapter plug or extension
lead which does not meet the applicable
safety standards. Do not tamper with the
power cord.
or
2c To receive analogue TV channels, connect
the cable for the rooftop antenna to the an-
tenna socket »Ant-in« on the television set
-8
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ConneCtion-AnD-prepArAtion------------------------------------------------
environmental-note
inserting-batteries-into-the-
-remote-control
7
This symbol on recharge-
able batteries/batteries or
on the packaging indicates
that the rechargeable bat-
tery/battery may not be disposed of with
regular household rubbish. For certain
rechargeable batteries/batteries, this sym-
bol may be supplemented by a chemical
symbol. Symbols for mercury (Hg) or lead
(Pb) are provided if the rechargeable batter-
ies/batteries contain more than 0.0005%
mercury or more than 0.004% lead.
Rechargeable batteries/batteries, including
those which do not contain heavy metal,
may not be disposed of with household
waste. Always dispose of used batteries
in accordance with local environmental
regulations. Make enquiries about the appli-
cable disposal regulations where you live.
1
2
Open the battery compartment by removing
the lid.
Insert the batteries (2 x 1.5 V micro, for
example R03 or AAA). Observe the po-
larity marked in the bottom of the battery
compartment.
3
Close the battery compartment.
note:-
7
If the television no longer reacts properly
to remote control commands, the batteries
may be flat. Always remove used batteries.
7
The manufacturer accepts no liability for
damage caused by leaking batteries.
-9
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
overview-------------------------------------------------------------------------------------------------------------------------------------
Connections-on-the-television-set
Av1-/-s-vHs
SCART socket (CVBS signal,
RGB signal);
Video and sound socket for
S-Video camcorder.
AuDio-out-l-r Sockets for audio output.
Audio
Socket for audio
input for a PC.
pC-in
VGA socket, video input
for PC.
Component
---Y-pb-pr
Sockets for video input
(YUV signal).
Sockets for audio input
(YUV signal).
sAtellite
Ant-in
Antenna socket for the
satellite antenna (DVB-S).
l--r
Antenna socket for a DVB-T,
DVB-C and analogue
antenna.
optic-out
Socket for audio output
(optical) for PCM/AC3
signals.
For connecting digital AV
amplifiers or AV receivers.
-10
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
overview-------------------------------------------------------------------------------------------------------------------------------------
HDmi2-(ArC) HDMI socket,
Controls-on-the-television-set
audio/video input.
8/i-
Switches the television on and
back into standby mode.
HDmi3
HDMI socket,
audio/video input.
v–--v+
menu-
Adjusts the volume;
selects menu functions.
HDmi4
HDMI socket,
audio/video input.
-Opens the menu.
usB2-(HDD)-
-USB socket for external
data media and
PVR function.
Select a menu option with
»p+« or »p–«.
Activate the function with
»v+«.
lAn
Network cable connection
socket.
Confirm the function with
»v+« or »v–«..
Press »menu« to quit the menu.
U
Headphone jack (3.5 mm
jack plug);
Sockets for audio output.
sourCe- Opens the pre-selection for
AV channels.
In the menu, press »p+« or »p–«
to select and press »sourCe« to
confirm.
Av2
---video-
-Video socket for
camcorder
p–--p+
Switches the television on from
standby;
selects channels in steps;
selects function in the menu.
l--r-
Audio socket for
camcorder.
usB1
-USB socket for external
data media without a power
supply of their own and
PVR function.
HDmi1
Ci- -
HDMI socket,
audio/video input.
-Common Interface Slot.
-11
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
overview-------------------------------------------------------------------------------------------------------------------------------------
the-remote-control-–-main-functions
Switches on and off
(Standby).
Switches on from standby;
Selects channel – directly.
Switches between
Selects the channel list
teletext and TV mode;
opens/closes the control
menu when playing a file in
DLNA menu.
(»All«, »FAV 1« to »FAV 4«).
Opens the 3D menu.
Opens the Smart inter@ctive
menu.
Displays information.
Opens the main menu.
Opens the channel list.
-Zapping function;
switches back one menu
level in the menus.
Opens the electronic
TV guide.
Opens the TOOLS menu.
Adjusts the volume.
Opens menu for AV channels
and USB input.
Then select using »
v«, » «,
<
» « or » « and press »oK«
Λ
>
to confirm.
Muting
Switches on from standby;
Selects channel – in steps.
Record, play, pause and
stop (only digital television
channels) on/from an exter-
nal data medium.
Opens the »PRnP« menu.
navigation-in-the-menus
Moves the cursor up
and down in the menus.
-
right in the menus.
-Activates various functions and
save functions/settings.
-12
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
overview-------------------------------------------------------------------------------------------------------------------------------------
!
Freeze frame, if no external data
medium is connected;
the-remote-control-–--
All-functions
Playback pause;
R-
-Switch on button lighting. The light-
ing switches off automatically after
a short time.
Time shift mode (only for digital
television channels and when
an external data medium is con-
nected);
Pauses the file being played in
DLNA and vTuner menu.
@
Opens the Smart inter@ctive menu.
-
-
Selects pages in teletext;
Selects/activates various functions
in the menus.
(red)
(green)
(yellow)
(blue)
7
Ends playback of a programme
from an external data medium;
Ends a recording or
playback in time shift mode;
Splits the screen in teletext;
Ends playing in DLNA and vTuner
menu.
5
Selects different audio settings;
Switches to double character size
in teletext;
Selects the next title/next picture in
the file browser.
Selects different audio languages
(only for digital television chan-
nels)
6
3
4
Selects different picture settings;
Refreshes a teletext page;
Selects the previous track/previous
picture in the file browser.
Selects different subtitles
(only for digital television chan-
nels)
Stops scrolling through pages in
teletext;
Starts a fast reverse search in the
file browser.
note:-
7
Your TV supports remote control feature
for Apple iPhones and Android phones.
Depending on the features of your TV,
you may control your TV by your phone
after downloading the free »GRUNDIG
TV Remote« application from Apple App.
Store or Android Market and install it on the
Apple iPhone/Android phone.
Selects the channel list ( »All«,
»FAV 1« to »FAV 4«);
Reveals answers in teletext;
Starts a fast forward search in the
file browser.
Starts the recording (
tal television channels
only for digi-
, the record-
ing is made on an external data
medium).
8
Starts playing a programme from
an external data medium;
Repeats a recorded programme;
Starts playing in DLNA and vTuner
menu.
-13
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
settinGs------------------------------------------------------------------------------------------------------------------------------------------
selecting-language,-country-and-
operating-mode
initial-set-up-and-tuning-
-television-channels
The television set is equipped with automatic
channel search, which searches for satellite
channels (DVB-S), terrestrial channels (DVB-T),
cable channels (DVB-C) and analogue channels.
1
Switch on the television set from standby with
»8«, »1…0« or »p+« or »p-«.
– During initial set-up, the »Installation Guide«
will be displayed.
You start the search and the television channels
will be stored into the Program Table. Following,
you can sort the television channels in the Pro-
gram Table.
Help:-
7
If this menu is not displayed, restore the
television set to its default settings (see
page 59).
For DVB-S channels there are 6000 presets
available, for DVB-T and DVB-C channels 1000
presets, and 99 presets for analogue channels.
2- Select the menu language with » «, » «,
<
>
»v
« or »
Λ« and press »oK« to confirm.
3- Select the mode with » « or » « and press
<
>
»oK« to confirm.
the-various-settings
– The settings used in »Home Mode« help to
save energy.
– Alternatively, the menu item »Shop Mode«
can be selected which the retailer can use
for demonstrating the device functions.
Depending on the type of antenna connected,
you can decide which channels you would like
the television to search for.
7
Tunes digital television channels from the satel-
lite, from page 15.
note:
You have two options for this search:
– the basic installation which presets a stand-
ard selection, e.g. the satellite Astra 19.2°
East; you need only start the search;
– the professional installation, which allows
you to make all required settings and set pa-
rameters for your receiver system.
7
End the »Shop Mode« by restoring the televi-
sion set to its default settings (see page 59).
4- Select the country in which the television set
is operated with » «, » «, »v« or »Λ« and
<
>
press »oK« to confirm.
– The »Source Setup« menu appears with the
»Connection Type« line marked.
7
Tunes digital terrestrial television channels, on
page 17.
note:
7
You can find a description of how to tune
7
Tunes digital television channels from the
cable provider, on page 17.
the television channel of your choice – de-
pending on the antenna connected – in the
following chapters.
7
Tunes analogue television channels, in the
chapter “Special functions”, starting on
page 76.
7
Further settings for digital television chan-
nels after the initial set-up can also be found
in the chapter “Special Settings”, starting on
page 69.
note:-
7
Make the language and country selection for
all types, then continue reading the respective
chapter.
-14
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
settinGs------------------------------------------------------------------------------------------------------------------------------------------
Advanced-installation
tuning-the-television-channels-
from-satellite-(DvB-s)
You have two options for tuning digital satellite
channels.
1
In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
with » « or » «.
<
>
2
Select the line »Advanced Installation« with
A
B
The easy installation,
which pre-configures all antenna settings for
the satellite channels on Astra 19.2° East.
»
v« or »Λ« and press »oK« to confirm.
– The menu appears.
20.07.2011
15:46
The advanced installation
INSTALLATION
ANTENNA SETTINGS
can be used if you wish to receive satellite
channels from various satellites. To do so,
you must make the antenna settings (Satel-
lite, LNB Power, LNB Type, DISEqC Mode,
LNB Selection) for the satellites chosen.
Satellite
ASTRA 2A°,E
10714
Off
Transponder
LNB Power
LNB Type
easy-installation
Universal
Off
1
In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
with » « or » «.
DISEqC Mode
LNB Selection
Off
<
>
2
Select the line »Easy Installation« with »
or » « and press »oK« to confirm.
v«
Low
Normal
Good
Λ
Quality
– Other menu options will be displayed,
the satellite Astra 19.2° East is preset.
Signal strength
Exit
Auto Tuning
Back
3
Start the scan with » « (green).
Manual Tuning
– The »Search results« menu appears, and
the scan for TV channels begins.
– Depending on the number of television
channels received, this can easily take a
few minutes.
3
Select the line »Satellite« with »
v« or »Λ«
and press »oK« to confirm.
– The »SELECT SATELLITE« menu appears.
Select the satellites with »v«, »Λ«, » « or
<
– The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
» « and press »oK« to confirm.
>
note:
note:
7
The setting in the line »Transponder« is not
required for this automatic scan.
7
You can abort the scan by pressing
»menu«.
4
5
Select the line »LNB Power« with »
v« or
»
Λ«.
Depending on the type of LNB, set the LNB
power supply to »13/18 V« or »14/19 V«
with » « or » «.
<
>
Select the line »LNB Type« with »v« or »Λ«.
Select the type of LNB installed with » «
<
or » «.
>
-15
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
settinGs------------------------------------------------------------------------------------------------------------------------------------------
6- Select the line »DISEqC Mode« with »
v
«
11 Start the scan with » « (red).
or »Λ«.
– The »Results« menu appears, and the scan
for TV channels begins.
Select »DiSEqC 1.0« or »DiSEqC 1.1« in
accordance with the existing antenna system
with » « or » «.
– Depending on the number of television
channels received, this can easily take a
few minutes.
– The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
<
>
– DiSEqC 1.0 allows up to four satellites to
be received simultaneously.
– DiSEqC 1.1 allows up to 16 satellites to be
received simultaneously.
note:
7
7- Select the line »LNB Selection« with »
«.
v« or
You can abort the scan by pressing
»menu«.
»Λ
Select the setting for the respective satellites
with » « or » «.
12 Press »menu« to end the setting.
<
>
note:
8- Once the settings for the satellite have been
made, switch to the »AUTOMATIC CHAN-
NEL SEARCH« menu with »« (red).
7
If other television channels are to be tuned
from a second satellite, proceed as follows:
Open the menu with »menu«, select the
20.09.2010
SOURCE SETUP
15:46
line »SOURCE SETUP« with »v« or »Λ«
AUTOMATIC CHANNEL SEARCH
and press »oK« to confirm. Then select the
»Automatic Channel Search« with » « or
« and press »oK« to confirm. Confirm
the line »Select Satellite« with »oK« and
select the preferred satellite with » «, » «,
v
»Λ
Connection Type
Select Satellite
Scan Mode
Satellite
ASTRA 2A , E
Free + Scramble
v
Λ
» « or » «. Start the scan with » « (red).
<
>
Continue the adjustment by step 7 of the
Service Type
All
chapter.
Network Search
Off
note:
7
Before recording HD channels, please
check signal quality and Strength, see
chapter "Displaying signal information" on
page 79. If the level is displayed in green,
you can record HD channels without any
problems.
Exit
Back
Start Search
9
Select the line »Scan Mode« with »
or » «.
Select the scan mode with » « or » «
(for unencrypted channels, for encrypted
channels only, or for both).
v«
Λ
<
>
10 Select the line »Service Type« with »
or » «.
Use » « or » « to select whether you
v«
Λ
<
>
want to search for television channels only
(TV), radio stations only (Radio) or both
(Radio + TV).
-16
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
settinGs------------------------------------------------------------------------------------------------------------------------------------------
tuning-terrestrial-television-
channels-(DvB-t)
tuning-television-channels-from-
the-cable-provider-(DvB-C)
1
In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Cable«
with » « or » «.
1
In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Air« with
» « or » «.
<
>
<
>
2
Select the line »Scan Type« with »v« or »Λ«.
2
Select the line »Scan Type« with »
«.
Use » « or » « to set the required scan
v« or
Use » « or » « to set the required scan type:
<
>
»Λ
– »DTV«, scan for digital television channels;
– »ATV«, scan for analogue television channels;
<
>
type:
–
»ATV & DTV«, scan for analogue and
digital television channels.
– »DTV«, scan for digital television channels;
– »ATV«, scan for analogue television
channels;
3
Select the line »Cabel Scan Type« with »
or » «. Select the preferred option (»Quick«
or »Full«) with » « or » «.
– The search function »Quick« sets up the
channels according to the information pro-
vided by your cable provider in the trans-
mission signal.
v«
Λ
–
»ATV & DTV«, scan for analogue and
digital television channels.
<
>
Caution:
7
The antenna power supply (5V ) may only
be switched on if the antenna is an active
indoor antenna with a signal amplifier and it
is not already supplied with a voltage via a
mains plug (or similar supply). Otherwise
you may cause a short circuit and irrepara-
bly damage your antenna.
– If the option »Full« is selected, the entire
frequency range will be scanned. The
search can take a long time with this op-
tion. This option is recommended if your
cable provider does not support the scan
type
»Quick«.
3
4
Select the line »Active Antenna Power« with
note:
»v«
or »Λ«.
7
You can accelerate the search. To do this,
you need information about the frequency
and network ID. You are usually able to get
this data from your cable operator or find it
in forums on the Internet.
Switch on the antenna power supply for the
antenna with » « or » « (»On«).
<
>
Start the scan with » « (green).
– The »Search Results« menu appears, and
the search for TV channels begins.
– Depending on the number of television
channels received, this can easily take a
few minutes.
4
Start the scan with » « (green).
–
The »Search Results« menu appears, and
the search for TV channels begins.
– Depending on the number of television
channels received, this can easily take a
few minutes.
– The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
– The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
note:
7
You can abort the scan by pressing
»menu«.
note:
7
You can abort the scan by pressing
»menu«.
5
Press »menu« to end the setting.
note:
5
Press »menu« to end the setting.
note:
Before recording HD channels, please check
signal quality and Strength, see chapter
"Displaying signal information" on page 79.
If the level is displayed in green, you can
record HD channels without any problems.
7
Before recording HD channels, please
check signal quality and Strength, see
chapter "Displaying signal information" on
page 79. If the level is displayed in green,
you can record HD channels without any
problems.
7
-17
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
settinGs------------------------------------------------------------------------------------------------------------------------------------------
selecting-channel-lists
Changing-the-program-table-for-
the-digital-channels
1
Open the menu with »menu«.
Channels which are found using the scan are
saved in the »PROGRAM TABLE«.
2
Select the »SOURCE SETUP« menu with »v«
or »Λ« and press »oK« to confirm.
– The »SOURCE SETUP« menu appears.
You can delete channels which are not required
from the programe table, you can change the
order of channels within the programe table and
lock individual channels (Parental control).
3
Select the line »Programe Table« with »v«
or »Λ« and press »oK« to confirm.
– The menu »PROGRAM TABLE« appears.
You can also add channels to the favourites list;
in addition, you can change the order of chan-
nels within the favourites list.
important:
7
Programe table and favourites lists are
saved separately according to the different
input sources (satellite, cable, air).
With » « (green) you can display the channels
which belong to one network.
7
When opening the programme table, the
respective channel list for the current input
signal appears.
Switch to the next page in the programe table
with »p+« and to the previous page with »p-«.
note:
If in the Program Table
to the name of the channel, you need a
CI module and a Smart-Card for watching
these channels.
With »
« (yellow) you can open the »LIST
7
appears added
MANAGEMENT« within the programe table.
In this List Management you can create your
own favourites lists.
With »
« (blue) you can sort the channels ac-
cording different criteria.
INSTALLATION
PROGRAM TABLE
Network ALL
1
Das Erste HD
Service
ALL
2 ZDF HD
3 arte HD
4 N24
5 Einsfestival
DTV
1 Das Erste HD
DTV
DTV
DTV
DTV
6 EinsPlus
7 arte
8 Phoenix
9 Test-R
10 ANIXE HD
DTV
DTV
DTV
DTV
DTV
11 HD 1
12 Life
13 Film
14 Promo
15 Sport1
DTV
DTV
DTV
DTV
DTV
16 TV Sport
17 Sat.8
18 SKY
19 TV6
20 TV5
DTV
DTV
DTV
DTV
DTV
Edit
Network
Add To Fav.
Sort
Exit
Back
Select Favorite
-18
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
settinGs------------------------------------------------------------------------------------------------------------------------------------------
Deleting-channels
skipping-channels
1
In the »PROGRAM TABLE« menu, select the
Edit mode by pressing » « (red)
You can mark television channels which should
be skipped when selecting with »Λ« or »v«.
.
It is still possible to select them using the number
buttons.
2
Select the television channel to be deleted
with
»
v
«, »
Λ
«
,
» « or » « and press
»
«
<
>
1
2
3
In the »PROGRAM TABLE« menu, switch
(yellow) to delete.
over to the list view with » « (yellow).
note:
Select the preferred channel with »
v«
7
You can delete all channels with »
(blue).
«
«
or »Λ«.
Select the column »Skip« with » « or » «
3
4
Confirm the deletion process with »
<
>
and use »oK« to mark the channel.
(green);
or
– The channel is marked by »✔«.
cancel the deletion process with » « (red);
4
Quit the program table with »menu«.
Quit the program table with »menu«.
note:
7
Channels can also be reactivated. Select the
channel with » « or » «, then select the
column »Skip« and reactivate the channel
with »oK«
Change-the-order-of-the-channels-in-
the-program-table
1
v
Λ
In the »PROGRAM TABLE« menu, select the
Edit mode by pressing » « (red)
.
.
Creating-lists-of-favourites
You can save your favourite channels in up to
four favourites lists (FAV 1 to FAV 4).
2- Select the channel which should be moved
with » «, » «, » « or » « and mark it with
» « (red).
v
Λ
<
>
notes:
3
Move the channel to its new position with
7
»
v«, »
Λ
«, » « or » « and press »oK« to
Favourites lists must be created separately
for all input sources (satellite, cable, air).
<
>
confirm.
7
note:
You can select the favourites list by pressing
»FAv«.
7
Repeat steps 2 and 3 if you would like to
change other channels.
1
2
3
In the »PROGRAM TABLE« menu, switch
over to the list view with » « (yellow).
4
Quit the program table with »menu«.
Select the channel of your choice with »
or »Λ«.
v«
sorting-channels-in-the-program-
table
You can sort the order of the channels in the pro-
gram table according different criteria: in order
of Satellite, alphabetical or in order of encryp-
tied/free channels.
“Push” the channel into the favourites
lists 1 to 4 with » « or » « and press »oK«
<
>
to confirm.
– The position in the favourites list is marked
with »✔«.
1
In the »PROGRAM TABLE« menu, select the
Sort mode by pressing « (blue)
– You can enter the same channel in more
than one favourite list.
»
.
2- Select the sort criteria with » « (red), »
«
– Each favourite list can store up to 255
channels.
(green) or
»
« (yellow).
3
Quit the program table with »menu«.
-19
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
settinGs------------------------------------------------------------------------------------------------------------------------------------------
note:
enter-own-names-for-the-favourites-
lists-(max.-6-characters)
You can enter own names for all favourites lists.
7
Channels can also be deleted from the
favourites lists. Select the channel to be
deleted with » «, » «, » « or » « and
press »oK« to delete it.
v
Λ
<
>
1
In the »PROGRAM TABLE« menu, switch over
● ● ●
to the list view with » « (yellow).
7
When deleting a channel from the favourites
list, the order within the favourites list will be
updated.
2
Select the desired favourites list with »1« till
»4«.
– The Favorite Name screen is displayed.
4
Quit the program table with »menu«.
3
4
Delete the „old“ name (FAV1), for this
sorting-channels-in-the-favourite-list
You can change the order of channels in the
favourites list.
purpose select with »v«, »Λ«, » « and
<
» « the push button »x« and delete the
>
character with »oK«.
1
In the »PROGRAM TABLE« menu, select the
favourites list »1« to »4«.
Select the required character/numeric with
»
v
»oK«.
«, »
Λ«, » « and » « and confirm with
<
>
2- Select the channel which should be moved
with » «, » «, » « or » « and mark it with
» « (red).
v
Λ
Repeat the procedure for further characters/
numerics.
<
>
– Select »ABC« for uppercase and »abc«
for lower case and confirm with »oK«.
– Select »?@123« for numbers and
symbols and confirm with »oK«.
3
Move the channel to its new position with
»
v«, »Λ«, » « or » « and press »oK« to
<
>
confirm.
notes:
5
6
Confirm the new name, select the push
7
Repeat steps 2 and 3 if you would like to
change other channels within the same
favourites list.
button »submit« with »
v«, »Λ«, » « or
<
» « and confirm with »oK«.
>
Press »menu« to end the seting.
7
Repeat steps 1 to 3 if you would like to
change channels in a different favourites list.
4
5
Exit the current favourites list with »
(blue).
– The entire programe table will appear
again.
«
Quit the program table with »menu«.
-20
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
settinGs------------------------------------------------------------------------------------------------------------------------------------------
notes:
picture-settings-
7
You can only select the »Mpeg NR« function
1
Open the menu with »menu«.
on digital and AV presets.
2
Select the menu item »PICTURE SETTINGS«
»Mpeg NR« reduces any interference
from artefacts (pixel blocks) from digital
programmes due to MPEG compression
(such as from DVB-T receivers or
DVD players).
with »v« or »Λ« and press »oK« to confirm.
– The »PICTURE SETTINGS« menu appears.
20.09.2010
15:46
PICTURE SETTINGS
7
The »Film Mode« detects and processes
feature films automatically for all channel
sources. This means you will always receive
an optimal picture.
3D Settings
Basic Tuning
Picture Mode
Brightness
Contrast
User
50
This functions in the modi 480i, 576i and
1080i in TV playback and for other channel
sources.
If the »Film mode« is switched on for
programmes without a feature film signal,
minor problems such as picture freeze,
defective subtitles or fine lines in the picture
could occur.
100
Sharpness
Colour
75
65
Colour Temperature
Medium
7
7
7
7
Enhanced picture settings
The function »Dynamic Contrast« adapts the
contrast dynamically and optimally for the
respective picture content.
With »Dynamic Backlight«, the device
optimally adapts the background lighting to
the picture content.
The »Backlight« can only be set manually
when the function »Dynamic Backlight« is
deactivated.
»MEMC« will only appear in menus of LCD
products with 200 Hz PPR Feature and LED
products with 400 Hz PPR feature..
Exit
Back
3
Select the line »Picture Mode«, »Bright-
ness«, »Contrast«, »Sharpness«, »Colour«, or
»Colour Temperature« with »v« or »Λ«.
Select the value with » « or » « and press
<
>
»oK« to confirm.
notes:
7
When changing the values with » « or » «,
<
>
the screen will be split. You can see the
current picture value on the left side, the
new setting on the right side. This feature is
not supported in 3D mode
5
Press »menu« to end the setting.
7
In the »PICTURE SETTINGS« menu you can
also find other additional settings.
4
Select the line »DNR«, »Mpeg NR«, »Vibrant
Colour«, »Perfect Clear«, »Film Mode«,
»Gamma«, »Dynamic Contrast«, »Dynamic
Backlight«, »Backlight« or »MEMC« with
»
v« or »Λ«.
Select the value with » « or » « and press
<
>
»oK« to confirm.
-21
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
settinGs------------------------------------------------------------------------------------------------------------------------------------------
Automatic-volume
sound-settings-
Television stations broadcast at different vol-
umes. The automatic volume limiting (AVL) func-
tion means the volume is kept the same when
you switch between channels.
1
Open the menu with »menu«.
2
Select the menu item »SOUND SETTINGS«
with »v« or »Λ« and press »oK« to confirm.
– The »SOUND SETTINGS« menu appears.
1
Select the line »AVL« with »
v« or »Λ« and
20.09.2010
15:46
select the option »On« with » « or » «.
<
>
SOUND SETTINGS
note:
7
If the »SRS TS HD« setting has been selected
in the »Audio Mode« line, the AVL line
cannot be selected.
Volume
10
Balance
Sound Type
Sound Mode
Stereo
SRS TS HD
Speech
stereo/two-channel-sound,-mono
If the device receives two-channel-sound pro-
grammes, e.g. a film with the original soundtrack
on audio channel B (display: »Dual II«) and
the dubbed version on sound channel A (dis-
play: »Dual I«), you can select the audio channel
you prefer.
SRS Sound Preset
External
Headphone
20
Audio Output Setup
Accessibility Settings
If the device receives stereo or Nicam pro-
grammes, it switches automatically to stereo
sound (display: »Stereo«).
End
Back
You can switch the sound to »Mono« if the stereo
sound quality is poor.
note:
1
Select the line »Audio Type« with »
v« or
7
Additional operations are explained in the
following sections.
»Λ
« and adjust the setting with » « or » «.
<
>
stereo-width
volume
This broadens the sound output for stereo pro-
grammes and improves the sound with mono
reception.
1
Select the line »Volume« with »
v
« or »
>
Λ
«
«
and change the setting with » « or » «.
<
Balance
1
1
Select the line »Audio Mode« with »
or » «.
v«
Select the line »Balance« with »
v
« or »
>
Λ
Λ
and change the setting with » « or » «.
<
2
Select the option »Spatial« with » « or » «.
<
>
-22
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
settinGs------------------------------------------------------------------------------------------------------------------------------------------
soundeffects
equalizer
This menu offers three preset sound effects
(Music, Natural and Speech) and one setting to
be created by you (User).
Equalizer offers a sound setting ”User” that you
can create.
Equaliser appears in the menu when »Sound
mode« is selected as »Spatial« or »Normal«,
and »Sound Medium« as »User«.
1
Select the line »Sound Preset« with »
v« or
»
Λ«.
1
2
Select »Equalizer« with »v« or »Λ« and
2
Select the sound effect »Music«, »Natural«
or »Speech« by pressing » « or » «.
press »oK« to confirm.
<
>
The »EQUALIZER« menu appears.
note:
note:
7
»User« option is active when »Sound mode«
setting is selected as »Normal or »Spatial«.
7
If the »SRS TS HD« setting has been selected
in the »Sound Mode« line, the »Equalizer«
line will not indicate.
srs-trusurround-HD
SRS TruSurround HD is a patented audio tech-
nology which is integrated into the television set
and only requires the built-in speakers to gener-
ate a Surround Sound effect.
Select the frequency bandwidth »120Hz«
with »v« or »Λ«.
Set the preferred value with » « or » «.
<
>
3
4
Set the next frequency bandwidth with »
or » « and repeat the setting.
v«
1
2
3
4
Select the line »Sound Mode« with »
or » «.
v«
Λ
Λ
Press » « to save the setting.
<
Select the option »SRS TS HD« with » « or
<
Audio-description-(Audio-subtitles)
» «.
>
Audio description is an additional audio channel
for visually-impaired persons. Descriptions are
provided of activities, surroundings, changes of
scene, gestures and actors' facial expressions.
Select the line »SRS Sound Preset« with »
v«
or »Λ«.
Select the sound effect »Music«, »Natural«
or »Speech« with » « or » «.
<
>
This audio channel is transmitted simultaneously
with the normal sound on digital channels. Avail-
ability depends on the respective channel and
broadcaster.
1
Select the line »Audio Description« with »
v
«
or »Λ
« and select the option »On« with » «
<
or » «.
>
2
Select the line »Volume« with »
v
« or »
>
Λ
«
and change the volume with » « or » «.
<
exiting-the-setting
1
Press »menu« to end the setting.
* Under licence from SRS Labs, Inc. TruSurround HD,
SRS and the
symbol are trademarks of
SRS Labs, Inc.
-23
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
television---operAtion--------------------------------------------------------------------------------
Displaying-information
Basic-functions
1- Display information, press »?« repeatedly.
– The display disappears automatically after
a short while.
switching-on-and-off
1
Press »8«, »1…0« or »p+« or »p-« to switch
on the television from standby mode.
Freeze-frame
2
Press »8« to switch the television to standby.
If you wish to view a particular scene for longer,
you can “freeze” the frame of the current pro-
gramme.
selecting-channels
1
Press »1…0« to select presets directly.
1
2
Activate the freeze-frame function with »$«.
End the freeze-frame function with »$«.
note:
2
Select channels step by step with »p+« or
»p-«.
3- Open the channel list with »oK«, select the
preferred television channel with » «, » «,
» « or » « and press »oK« to confirm.
7
v
Λ
If an external data medium is connected
to the television, the time shift function is
activated with »$«. The time shift function is
described on page 44.
<
>
Exit the channel list with »menu«.
selecting-channels-from-lists
You can select channels from various lists (e.g.
all channels, FAV 1 to FAV 4).
picture-settings
Various picture settings are available.
1
Press »FAv« to open an overview of pro-
grame tables.
1
2
Open the Tools menu with »tools«.
Select the menu item »Picture Mode« with
– The overview is displayed.
»v« or »Λ«.
2
3
4
Select a channel list with »
Λ« or »v« and
3- Select »User«, »Eco TV«, »Vivid«, »Natural«,
»Movie«, »Sports« or »Game« by pressing
» « or » «.
open it with »oK«
.
Select a television channel with »
v
«, »Λ«,
<
>
» « or » « and press »oK« to confirm.
– You can change the »User« picture setting;
see “Picture settings” on page 21.
<
>
Press »menu« to exit the channel list.
note:
selecting-a-preset-Av-channel
7
Picture setting »Game« can only be selected
in »HDMI«, »Component« and »PC« modes.
1
Open the »Select Source« menu with »
Select an AV preset with » «, »
» « and press »oK« to confirm.
«.
2
v
Λ«, » « or
<
>
3
Use »1…0« to switch back to the television
channel.
Adjusting-the-volume
o
1
Adjust the volume with »
«.
- -–
+
switching-sound-on/off
1
Press » « to mute the sound or switch it
p
on again.
-24
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
television---operAtion--------------------------------------------------------------------------------
Audio-settings
Various audio settings are available.
Zoom-function
This function allows you to enlarge the picture
as required.
1
2
Open the Tools menu with »tools«.
1
2
Open the Tools menu with »tools«.
Select the menu item »Sound Preset« with
»v« or »Λ«.
Select the menu item »Zoom« with »v« or
»Λ«.
3
Select the audio setting »User«, »Music«,
»Natural« or »Speech« by pressing » « or
3- Press- »oK« repeatedly to enlarge the
<
» «.
display in three steps.
>
– You can change the »User« audio setting
– see the “Soundeffects” chapter on page
23.
note:
7
Zoom feature is not supported in 3D mode.
note:
eco-mode
This function allows you to reduce the power
consumption.
7
»User« option is active when »Sound mode«
setting is selected as »Normal or »Spatial«.
Audio-language
1
2
Open the Tools menu with »tools«.
Various languages are available on digital tele-
vision channels. This depends on the programme
being broadcast.
Select the menu item »Eco TV« with »v« or
»Λ«.
3- Switch on the Eco mode with » « or » «.
<
>
<
1
2
Open the selection menu with »
«.
4
Switch the Eco mode off again with » « or
Select the language by pressing »
and press »oK« to confirm.
v
« or »Λ«
» «.
>
subtitles
Various subtitles are available on digital televi-
sion channels. This depends on the programme
being broadcast.
1
2
Open the selection menu with » «.
Select the subtitles with »v« or »Λ« and
press »oK« to confirm.
note:
7
Subtitles in terrestrial digital broadcasts are
not supported in 3D mode.
-25
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
television---operAtion--------------------------------------------------------------------------------
Zapping-function
This function remembers the channel you are
currently watching while you switch over to other
ones (zapping).
electronic-tv-guide
The electronic TV guide provides an overview of
all programmes that will be broadcast in the next
week (for digital channels only).
1
Press »1…0« or »p+«, »p–« to select the
1
Press »GuiDe« to display channel informa-
channel to be stored in the zapping memory
tion.
and press » « to confirm.
<
notes:
7
2
3
Press »1…0« or »
Λ«, »v« to switch to
Not all channels supply provide a detailed
another television channel.
TV guide.
7
Many broadcasters transmit the current
Press » « to switch between the saved tel-
<
schedule, but do not offer detailed descrip-
tions.
evision channel and the last television chan-
nel viewed.
7
There are broadcasters which do not pro-
vide any information at all.
4- End the function with »menu«.
2
3
Press »
v« or »Λ« to select a television
channel.
– Today's programmes on the television
channel selected are displayed.
Switch to the information about the current
programme with » «.
>
notes:
7
You can open and switch off the extensive
programme information with »?«.
7
You can can added the selected broadcast
to the memory timer by pressing »oK«
.
4
5
6
Press »
v
« to select information on the next
programme and, »
Λ
« to return to the infor-
mation for the current programme.
Select programmes on over the coming days
with » « (green), and switch back to the cur-
rent day with » « (red).
Switch back to the channel selection with
» «.
<
note:
7
Filter for certain programmes with »
«
(blue), select the channel type with » «,
<
» «, »v« or »Λ« and press »oK« to con-
>
firm. Programmes which match the selected
channel type are displayed.
7- Quit the electronic TV guide with »menu«.
-26
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
television---operAtion--------------------------------------------------------------------------------
»panorama«-format-
Changing-the-picture-format
This setting is suitable for films in an especially
wide format.
The television automatically switches to the 16:9
format if this format is detected via the SCART
socket.
During programmes in 4:3 format, the picture is
stretched horizontally if the »Panorama« function
is selected. The picture geometry is stretched
horizontally.
1
2
Open the Tools menu with »tools«.
Select the menu item »Picture Format« with
»
v« or »Λ« and press »oK« to confirm.
3
Select the picture format with » « or » « and
»overscan-off«-format
<
>
press »oK« to confirm.
In this mode, HD pictures are not cropped by the
HDMI sockets or component sockets, and are
displayed in their original size. This only applies
in HDMI mode and for resolutions of 720p or
above.
– You can choose between the following
picture formats:
»Auto«-format
The picture format is automatically switched to
»16:9« for 16:9 programmes.
note:
7
Picture format selection is not supported in
3D mode.
The picture format is automatically switched to
»4:3« for 4:3 programmes.
»16:9«-and-»14:9«-formats
For programmes in 4:3 format, the picture is
stretched horizontally if the »16:9« format or
»14:9« format is selected.
The picture geometry is stretched horizontally.
With actual 16:9 input sources (from a set-
top box on the SCART socket) the picture fills
the screen completely and with the correct
geometry.
»4:3«-format
The picture is shown in 4:3 format.
»letterBox«-format-
The letterbox format is especially suitable for
programmes in 16:9 format.
The black borders which are usually at the top
and bottom of the screen are eliminated, 4:3 pic-
tures fill the screen.
The transmitted pictures are enlarged, but are
slightly cropped at the top and bottom. The pic-
ture geometry remains unchanged.
»subtitle«-format
If you cannot see the subtitles at the bottom of
the screen, select »Subtitle«.
-27
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
3D-FunCtion--------------------------------------------------------------------------------------------------------------------------
important-information-about-the-
3D-function
preparing-the-3D-function
Your Grundig television and 3D shutter glasses
can provide the reality of the cinema when you
watch 3D movies in your home.
7
Keep a sufficient distance from the television.
The optimum distance is three times the
height of the screen. Watching 3D films from
a close distance for a long time could impair
your vision.
This TV uses state-of-the-art LED technology to
give you the best experience 3D has to offer.
To join 3D world, you just need to put on the
Grundig 3D glasses.
7
Never use the 3D function for longer than
3 hours without a break.
notes:
7
It is essential that you supervise children
7
Only use the GRUNDIG AS-3D G glasses.
watching a 3D programme to prevent dam-
age to their health. Children under 6 years
should not watch 3D content because their
spatial vision is not yet completely developed.
Do not use 3D glasses from other manufac-
turers.
7
Grundig AS-3D G glasses are also sold
separately. Please contact your dealer.
7
Watching 3D movies with 3D shutter glasses
7
The infrared transmitter is located at the
for long durations may cause headaches or
fatigue. Stop watching if you get a head-
ache, feel dizzy or generally unwell.
lower left corner of the television and emits
the signals at 90° horizontally and 40°
vertically.
7
Do not use the 3D function if you are anx-
ious, sleepy or overtired.
7
It may not be possible to obtain 3D effects
when there is an obstacle between the infra-
red transmitter and the glasses.
7
If you or a member of your family suffers
with epilepsy, you should consult your doc-
tor before watching 3D films.
7
If, when watching a 3D film, your vision
becomes impaired, you feel dizzy or nau-
seous, your eyes hurt, you have muscle
spasms or have difficulty in concentrating,
you must stop watching immediately.
7
3D images can startle the viewer. We rec-
ommend that elderly persons, pregnant
women and persons with serious physical
complaints avoid watching 3D content.
7
Do not use the 3D glasses for other purpos-
es, for example as sunglasses or protective
glasses, as this may impair your sight.
-28
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
3D-FunCtion--------------------------------------------------------------------------------------------------------------------------
note:
watching-3D-films
notes:
7
Frame Packing appears in the 3D menu only
if a video signal is sent to the »HDmi« input
in HDMI 1.4 format. The »Side by Side«
and »Top Bottom« options do not appear.
7
The 3D function is supported using the »DvB-
t«, »DvB-C«, »DvB-s« and »DlnA« chan-
nel sources or external devices connected to
the »HDmi«, »Ypbpr«, »vGA« or »usB«
inputs.
4
Turn off the 3D function by setting it to »Off«
with »3D« and confirm with »oK«
.
7
With »HDmi«, »Ypbpr« and »vGA«
3D-settings
inputs, 3D mode is only possible with
resolutions at »1280 x 720p 50/60
Hz«, »1920 x 1080i 50/60 Hz« and
»1920 x 1080p 24/30, 50/60 Hz«.
1
Open the menu with »menu«.
Select the line »PICTURE SETTINGS« with
« or » « and confirm with »oK«
– The »PICTURE SETTINGS« menu appears.
Select »3D SETTINGS« with » « and
2
»
v
Λ
.
7
The 3D experience depends on the format
and features of the movie (resolution,
sharpness etc.) being played.
3
Λ
confirm with »oK«
.
7
If 3D mode is activated for a picture which
– The »3D SETTINGS« menu is displayed.
is not in 3D, the picture on the screen may
appear blurry both with or without the 3D
glasses.
dd.mm.yyyy
hh:mm
PICTURE SETTINGS
3D Settings
7
The 3D effect may degrade if you watch
3D images under fluorescent light. In such
cases, either reduce the light or turn off the
lamp.
Off
3D Mode
3D Effects
On
0
Effect mode
3D Perspective
Depth
7
Your TV will switch from 3D mode to 2D
mode for the following: if the program table
or EPG information is displayed, the channel
or the source are changed, playback of a
3D film is completed or the next film starts to
play in USB or PVR mode.
0
3D Options
Left-Right Correction
Off
1
2
Open the »Select Source« menu with »
«.
Select the source (digital channel or suitable
Exit
Back
input) that will be played in 3D with » «,
<
» «, »
v
« or »
Λ
« and confirm with »oK«
.
>
3
Open 3D menu with »3D« button and use
» «, » « button to select »Side by Side«, »Top
Bottom« or »2D → 3D« option according to
the content to be played and confirm with
note:
<
>
7
Additional operations are explained in the
following sections.
»oK«
.
– »2D → 3D«: Changes 2D picture to 3D.
– »Side by Side«: Displays a picture next to
the other one.
– »Top Bottom«: Displays a picture below
the other one.
– »Frame Packing«: Right and left images of
the TV are displayed alternately.
-29
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
3D-FunCtion--------------------------------------------------------------------------------------------------------------------------
Adjusting-2D-→-3D-effects
Formats-supported-by-HDmi-1.4
When you change 2D broadcasting to 3D, you
can adjust the most suitable effect depending on
your personal preferences.
With HDMI 1.4, your TV can recognise and
play 3D content.
The formats supported are shown in the follow-
ing table.
1
Select »Effect mode« with »
v« or »Λ« and
set it to »On« with » « or » «.
<
>
Frame Packing 1080p @
23.98/24Hz
For-Blu-
ray-films
– »3D Perspective« and »Depth« options
are activated.
Frame Packing 720p @ 50 or
59.94/60Hz
2
3
Select »3D Perspective« with »
v
« or »
Λ
«
For-3D-
games
and adjust with » « or » «.
<
>
« or »
Side by Side
Horizontal
1080i @ 50 or
59.94/60Hz
Select »Depth« with »
v
Λ
« and select
For-3D-
the picture setting as »Low«, »Medium« or
»High« with » « or » «.
films-from-
broadcas-
ters
<
>
Top and
Bottom
720p @ 50 or
59.94/60Hz
1080p @
4
Press »menu« to end the setting.
left---right-Correction
23.97/24Hz
When Frame Packing mode is enabled in HDMI
source, 3D perception may disappear in 3D
films or 3D games due to a synchronization shift
arising from HDMI signal. You may correct 3D
perception with this feature.
note:
7
Refer to the user manual of the Grundig AS-
3D G glasses for further information about
usage, cleaning and care of the glasses.
7
»HDmi4« input does not support HDMI1.4.
1
Select »Left-Right Correction« with »
«.
v« or
»
Λ
2
Press » « or » « to switch the function »On«.
<
>
note:
7
Set the function to »Off« with » « or » «.
<
>
3
Press »menu« to end the setting.
-30
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
smArt-inter@Ctive-tv-AnD-Home-networK-
what-is-smart-inter@ctive-tv
Smart Inter@ctive TV provides your television
with internet services and pages when con-
nected to internet.
wired-network
wired-network-connection
1
Connect the output of external modem to the
»lAn« socket with Cat 5 cable.
Through Interactive TV feature you can run many
local and global internet applications. These
applications include video, picture and music
applications, social networks, news and sports,
weather applications and doctor or pharmacy
search, recipes and viewing traffic congestions
depending on your local city.
Also, you can listen to online radio.
Your TV supports remote control feature for
Apple iPhones and Android phones. Depending
on the features of your TV, you may control your
TV by your phone after downloading the free
»GRUNDIG TV Remote« application from Apple
App. Store or Android Market and install it on
the Apple iPhone/Android phone.
The availability of the applications and the con-
tent is dependent on the content provider.
note:
7
Connection cables are not supplied.
network-connection
You can establish a wired or wireless connection
between your television and the local network.
If you want use a wired network connection,
start with the instructions on this page;
if you use a wireless network connection, follow
the instructions in section "Wireless network", on
page 35.
-31
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
smArt-inter@Ctive-tv-AnD-Home-networK-
3
4
5
Select »Connection Type« with »
v
« or »
Λ
«
wired-network-settings
There are two ways of making the wired network
settings.
and then select »Wired« with » « or » «.
<
>
Select »Network Configuration« with »
v
« or
»Λ« and then select »AUTO« with » « or » «.
<
>
A
Automatic wired network connection,
all connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) are ob-
tained from modem automatically.
Start the registration to the home network by
pressing » « (red).
– The mesage »Connecting ... Please Wait«
appears.
B
Manual wired network connection,
all connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) must be
configured manually.
6
Press » « (green) to make sure that the
network connection is established with the
current settings.
– The messages »Testing ... Please Wait«
appears, after successfull announcement
the messages »Connecting To Gateway:
Success« and »Internet Connection:
Success«.
Automatic-wired-network--
connection
Most of the home networks are Dynamic. If
you have a dynamic network, you must use a
DSL modem that supports DHCP. A Television
connected to the same network with a Modem
or IP sharer that support DHCP obtains the
»DNS« values that are required for »IP Address«,
»Netmask«, »Gateway« and internet access
automatically, and thus you are not required to
enter those values manually.
7
Press »menu« to end the setting.
note:
If you do not have a dynamic network,
follow the instructions in manual connection
section.
7
1
2
Open the menu with »menu«.
Select the line »INTER@CTIVE TV« with »
v«
or »Λ« and press »oK« to confirm.
– The »INTER@CTIVE TV« menu appears.
dd.mm.yyyy
hh:mm
INTER@CTIVE TV
OK
inter@ctive Applications
Network Settings
Wired
Connection Type
AUTO
Network Configuration
IP Address
10.134.151.15
10.134.150.8
255.255.255.0
DNS
Netmask
Gateway
MAC Address
10.134.151.254
E1:DF:BF:92:00:11
Connect
Exit
Test Connection
Back
-32
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
smArt-inter@Ctive-tv-AnD-Home-networK-
7
8
9
Select »Netmask« with »
Enter the Netmask with »1…0« and press
« (green) to save the value.
v« and press »oK«.
manual-connection
Certain networks require Static IP address. If your
network requires a Static IP address, you must
enter the »IP Address«, »Netmask«, »Gateway«
and »DNS« values manually. You can obtain
your »IP Address«, »Netmask«, »Gateway«
and »DNS« values from your Internet Service
Provider (ISP).
»
Select »Gateway« with »
Enter the Gateway with »1…0« and press
« (green) to save the value.
v« and press »oK«.
»
Start the registration to the home network by
pressing » « (red).
1
2
Open the menu with »menu«.
– The mesage »Connecting ... Please Wait«
appears.
Select the line »INTER@CTIVE TV« with »
or »Λ« and press »oK« to confirm.
v
«
10 Press » « (green) to make sure that the
– The »INTER@CTIVE TV« menu appears.
Select »Connection Type« with » « or »
and then select »Wired« with » « or » «.
network connection is established with the
current settings.
3
4
v
Λ«
– The messages »Testing ... Please Wait«
appears, after successfull announcement
the messages »Connecting To Gateway:
Success« and »Internet Connection:
Success«.
<
>
Select »Network Configuration« with »
v
« or
»
>
Λ« and then select »Manual« with » « or
<
» «.
– »IP Address«, »Netmask«, »Gateway« and
»DNS« options are active.
11 Press »menu« to end the setting.
dd.mm.yyyy
hh:mm
INTER@CTIVE TV
OK
inter@ctive Applications
Network Settings
Wired
Connection Type
Manual
Network Configuration
IP Address
10.134.151.15
10.134.150.8
255.255.255.0
DNS
Netmask
Gateway
MAC Address
10.134.151.254
E1:DF:BF:92:00:11
Connect
Exit
Test Connection
Back
5
6
Select»IPAddress«with»v«and press»oK«.
Enter the IP address with »1…0« and press
»
« (green) to save the value.
Select »DNS« with »
EntertheDNSaddresswith»1…0«andpress
« (green) to save the value.
v« and press »oK«.
»
-33
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
smArt-inter@Ctive-tv-AnD-Home-networK-
notes:
wireless-network-connection
7
The GRUNDIG Wireless WiFi Adapter sup-
ports IEEE 802.11 B/G and N communica-
tion protocols. We recommend you to use
IEEE 802.11N protocol to obtain the best
performance in HD video playback.
7
If you use a modem that supports IEEE 802.
11B/G, video playback performance may
be poor when compared to a modem that
supports IEEE 802.11N since the data
transfer rate of IEEE 802.11B/G protocol
is lower.
7
Please note that video playback performance
in a DLNA application on a wireless local net-
work and in a smart Inter@ctive TV applica-
tion on a network with internet connection de-
pends on the number of users on the network
as it is the case in every wireless network.
1
Television includes a built-in Wireless WiFi
Adapter to connect it to wireless network.
7
7
7
It is recommended to switch off the equip-
ment that are not in use in home network in
order to avoid unnecessary network traffic.
note:
7
Apart from the built-in WiFi adapter on TV,
external WiFi adapter can be connected to
Placing the modem or wireless network shar-
er on an elevated location will increase the
wireless connection reception strength.
»usB1« and »usB2-(HDD)« inputs.
Wireless connection reception strength may
vary depending on the type of the modem,
the distance between the modem and televi-
sion and the distance between the device
used as a DMS for DLNA application and
the modem.
7
Modem must be transmitting its SSID in order
to establish a wireless connection. Television
can not connect to a network without SSID.
-34
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
smArt-inter@Ctive-tv-AnD-Home-networK-
4
Select »Network Configuration« with »
v« or
wireless-network-settings
There are two ways of making the wireless net-
work settings.
»Λ
« and then select »AUTO« with » « or » «.
<
>
5
Select »Select Access Point« with »
v« or
»Λ
« and confirm with »oK«
.
A
Automatic connection,
– »Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu
»Apart from Access Point Selection, all data
regarding the connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
6
7
Select the network that you want to connect
with »
v«, »Λ«, » « or » « and confirm with
<
>
B
Manual connection,
»oK«
.
all connection settings (»IP Address«,
»Netmask«, »Gateway« and »DNS«) must
be configured manually.
– Wireless connection password screen is
displayed.
Select the required character with »
v«, »Λ«,
Automatic-connection
» « and » « and move to the next character
<
>
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. Modems and IP
sharers that support DHCP obtain the »DNS«
values that are required for »IP Address«,
»Netmask«, »Gateway« and internet access
automatically, and thus you are not required to
enter those values manually.
with »oK«
– Select »ABC« for uppercase and »abc«
for lower case and confirm with »oK«
– Select »?@123« for numbers and symbols
and confirm with »oK«
– Enter the password, select »Confirm« with
«, » «, » « or » « and confirm with
»oK«
note:
.
.
.
»v
Λ
<
>
.
1
2
Open the menu with »menu«.
7
In WEP encryption system, more than one
network password can be assigned for the
network. Your television can only connect to
network with level 1 password.
Select the line »INTER@CTIVE TV« with »
v«
or »Λ« and press »oK« to confirm.
– The »INTER@CTIVE TV« menu appears.
dd.mm.yyyy
hh:mm
8
9
Start the registration to the home network by
INTER@CTIVE TV
pressing » « (red).
– The mesage »Connecting ... Please Wait«
appears.
OK
inter@ctive Applications
Press » « (green) to make sure that the
Network Settings
network connection is established with the
current settings.
– The messages »Testing ... Please Wait«
appears, after successfull announcement
the messages »Connecting To Gateway:
Success« and »Internet Connection:
Success«.
Wireless
Connection Type
N/A
Select Access Point
Network Configuration
AUTO
10.134.151.15
10.134.150.8
IP Address
DNS
255.255.255.0
10.134.151.254
Netmask
Gateway
10 Press »menu« to end the setting.
note:
Connect
7
Exit
Back
If you do not have a dynamic network,
Test Connection
follow the instructions in manual connection
section.
3
Select »Connection Type« with »
v« or »Λ«
and then select »Wireless« with » « or » «.
<
>
-35
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
smArt-inter@Ctive-tv-AnD-Home-networK-
7
Select »Network Configuration« with »v« or
manual-connection
»
Λ« and then select »Manual« with » « or
<
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can ob-
tain your »IP Address«, »Netmask«, »Gateway«
and »DNS« values from your Internet Service
Provider (ISP).
» «. »IP Address«, »Netmask«, »Gateway«
>
and »DNS« options are active.
8
9
Select»IPAddress«with»
Enter the IP address with »1…0« and press
« (green) to save the value.
v«andpress»oK«.
»
Select »DNS« with »
EntertheDNSaddresswith»1…0«andpress
« (green) to save the value.
v« and press »oK«.
1
2
Open the menu with »menu«.
»
10 Select »Netmask« with »
Enter the Netmask with »1…0« and press
« (green) to save the value.
Select the line »INTER@CTIVE TV« with »
v«
or »Λ« and press »oK« to confirm.
v« and press »oK«.
– The »INTER@CTIVE TV« menu appears.
»
3
4
Select »Connection Type« with » « or »
v
Λ«
>
« or
11 Select »Gateway« with »
Enter the Gateway with »1…0« and press
« (green) to save the value.
and then select »Wireless« with » « or » «.
<
v« and press »oK«.
Select »Select Access Point« with »
v
»Λ« and confirm with »oK«.
»
– »Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu
12 Start the registration to the home network by
pressing » « (red).
– The mesage »Connecting ... Please Wait«
appears.
5
6
Select the network that you want to connect
with »
v«, »Λ«, » « or » « and confirm with
<
>
13 Press » « (green) to make sure that the
»oK«
.
network connection is established with the
current settings.
– Wireless connection password screen is
displayed.
– The messages »Testing ... Please Wait«
appears, after successfull announcement
the messages »Connecting To Gateway:
Success« and »Internet Connection:
Success«.
Select the required character with »
v«, »Λ«,
» « and » « and move to the next character
<
>
with »oK«
– Select »ABC« for uppercase and »abc«
for lower case and confirm with »oK«
– Select »?@123« for numbers and symbols
and confirm with »oK«
– Enter the password, select »Confirm« with
«, » «, » « or » « and confirm with
»oK«
notes:
.
.
14 Press »menu« to end the setting.
.
»v
Λ
<
>
.
7
In WEP encryption system, more than one
network password can be assigned for the
network. Your television can only connect to
network with level 1 password.
7
For TV to discover the wireless modem on
the network, the network name should
support ASCII characters.
-36
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
smArt-inter@Ctive-tv-AnD-Home-networK-
selecting-internet-applications
smart-inter@ctive-tv-internet-
applications
Smart Inter@active TV applications provide inter-
net services to your television. These applications
are designed according to your television.
1
Open the menu »SMART inter@ctive TV«
with »@«.
With the Smart Inter@active TV feature you can
access many local and global internet applica-
tions. These applications include video, picture
and music applications, social networks, news
and sports, weather applications and doctor or
pharmacy search, recipes and viewing traffic
congestions depending on your local city.
KATEGORIE
Selected Application
All
A
Aplication information
A
Social&Fun
Health&Life
News&Video
3
Press OK to Enter
Exit
Back
KATEGORIE
You can listen to online radios and access many
other entertaining information.
2
Select the application with »v«, »Λ«, » «
and » « and press »oK« to confirm. The
<
notes:
>
7
Availability of Smart Inter@active TV
applications are dependent on the country.
selected application will be started.
notes:
7
Interactive TV internet applications cannot
7
You can advise the applications also by
categories, press » « (blue) and select
download and save files, cannot upload
files to a web site and cannot install add-ins
except Login pages of some applications.
v« or »Λ« the categorie and confirm
with »
with »oK«
.
7
Under no circumstances, Grundig is
responsible for the content and the quality
of content offered by the content providers.
7
If you attempt to start an application without
wire or wireless adapter connected, the
related warning is displayed on the screen.
If your wire or wireless adaptor is connected
but you cannot receive IP or internet is
not connected, the applications cannot
be started. In this case, check Network
connection settings. See page 31 or
34.
7
Grundig has made special agreements
with the application owners which have a
limited duration. Application owners may
update, modify, restrict or entirely remove
those applications with their own decision.
Grundig cannot be held responsible for
such changes.
7
Grundig reserves the right to make all
changes such as modifications, restrictions,
extensions, transfers and removals on
internet applications provided through your
Smart Inter@ctive TV.
7
In Login process of some applications,
it may be required to connect to the web
page of the related application. Subject
web pages may contain links not related to
Login process. When connecting those links,
TV may access open web and view contents
that are not supported by your TV. As you
are on open web, your TV cannot control
those unsupported contents or cannot be
held responsible for them.
-37
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
smArt-inter@Ctive-tv-AnD-Home-networK-
smart-İnter@ctive-browser-main-menu
1
2
3
Application gallery
1
Selected applications
4
2
Description of the
application
KATEGORIE
All
Selected Application
4
5
Live picture from the
current TV channel
A
Aplication information
A
Social&Fun
Health&Life
News&Video
Submenü for selecting
the different categories.
5
3
Press OK to Enter
Exit
KATEGORIE
Back
navigation-in-the-main-menu
playing-and-other-options-in-the-
applications
note:
1
Select the desired application with »
v«,
»Λ
«, » « and » « and press »oK« to con-
<
>
firm.
7
Some applications do not support all
– The main menu of the application appears
after a short time.
playing options, and playing options may
vary among different applications.
note:
1
2
3
4
»8« starts playback in the applications.
»!« pauses playback in the applications.
»7« stops playback in the applications.
7
You can advise the applications also by
categories, press »
with »
with »oK«
« (blue) and select
v« or »Λ« the categorie and confirm
.
Press »3« or »4« during playback, select
different speed backwards and forwards.
2
The further using is dependent of the struc-
ture from the application. See the notes on
the screen.
5
Press »5« or »6« during playback, selects
the previous or the next section.
6- Press-»Λ«, »v«, » «, » « to slide the screen
<
>
up and down, left and right in the virtual key-
board and applications.
7- Press-»oK« to confirm the selections in
virtual keyboard and applications.
8- Press-»1…0«, » « (red), » « (green),
»
« (yellow), »
« (blue) to select/
enable various functions in the applications.
9
Press »@« to end the application.
-38
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
smArt-inter@Ctive-tv-AnD-Home-networK-
3
Press »
« (blue) to discover DMS
playback-the-video,-music-and-
image-files-with-home-network-
connection
devices on home network.
– DMS devices that are discovered appears
in the menu.
With DLNA menu of your television, you can
easily access Video, music and photo files on
server; and thanks to DMR feature, you can au-
tomatically start and stop media playing on de-
vices with DMC feature.
note:
7
If no DMS device appears, check the
network connection. See page 31 or 34.
4
Select the desired DMC device with »
v
«, »
Λ
.
«,
» « or » « and display its content with »oK«
notes:
<
>
7
You can share your videos, music or
notes:
photographs via devices such as a PC,
Mobile Phone or NAS (Network Attached
Storage) functioning as a DLNA compatible
DMS (Digital Media Server).
7
File and folder structure of the DMS device
in menu may vary depending on the Digital
Media Server software in use.
7
7
Subtitles are not supported on video files
that are played through the DMS device.
7
If the DMS device and the television are
connected to the wireless network at the
same time, laggings or freezing can arise
during video playback.
Only the formats with a DLNA certificate
(»MPEG_PS_NTSC«,
»MPEG_PS_PAL«,
»MPEG_TS_SD_EU« and »MPEG_TS_EU_
ISO«) are supported from among the video
files played from DMS device.
7
TV can also operate with DMS software
installed in the computer, however, a full
compatible operation with software without
DMS certificate is not guaranteed.
7
7
With high bitrate videos, distortion can be
seen.
7
When you are using a PC with Windows
Folders that appear as unknown in DLNA
application cannot be played by the TV.
Installing the codec to your computer can
solve this problem.
OS, you can configure the Windows Media
Player (from version 11) as Digital Media
Server.
The required settings are related to the
software version.
7
Only the formats with a DLNA certificate
(»AAC_ADTS_320«, »LPCM«, »MP3«,
»WMABASE« and »WMAFULL«) are
supported from among the audio files
played from DMS device.
select-the-Digital-media-server
1
Open the menu »SMART inter@ctive TV«
with »@«.
7
Only the formats with a DLNA certificate
(»JPEG_LRG«, »JPEG_MED« and »JPEG_
SM«) are supported from among the picture
files played from DMS device.
2
Select the option »dlna« with »
v«, »Λ«,
» « or » « and confirm with »oK«
.
<
>
– »dlna« menu is displayed.
0
Device Found
Page: 1/1
Press BLUE key to search DMS device.
-39
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
smArt-inter@Ctive-tv-AnD-Home-networK-
start-playback
vtuner-internet-radio
1
In the content of the DMC device select the
Many radio stations broadcast through the inter-
net. vTuner allows you to access many popular
radio stations on earth. Thanks to the vTuner
function of your television, you can display a
list that contains many radio stations, and select
and listen to the desired stations based on your
tastes.
required folder with »v«, »Λ«, » « or » «
<
>
and confirm with »oK«
.
– All titels appears.
2
3
Select the required title with »
v
«, »
Λ
«, » «
<
or » «.
>
Start playback with »8«.
note:
7
Internet connection is required to use vTuner
function.
other-playback-functions
1
2
3
Press »!« to pause playback.
1
2
Open the menu »SMART inter@ctive TV«
Press »8« to resume playback.
with »@«.
Press »5« or »6« repeatedly until the
desired file is reached.
Select »vTuner« with »
v
.
«, »
Λ
«, » « or » «
<
>
and confirm with »oK«
– »Internet Radio« menu is displayed.
4
5
6
Press »7« to stop playback.
Press » « to return to the DMS list page.
VTuner
<
1/6
Favorites
Press »GuiDe« to exit the DLNA function.
Added Stations
Location
note:
Genre
New Stations
Most Popular Stations
7
This playback functions and others you can
also select with the function menu:
»FAv« opens/closes playback functions menu;
»8« starts playback;
Exit
Back
»!« pause playback;
»7« stop playback;
3
Select the required category with »
v
« or
»
Λ« and display its content with oK«.
»
»
»
»
3« and »4« search for a passage;
« select the repeat function;
« select the playlist;
– »Select radio station with »v« or »Λ« and
press »oK« or »8«.
– Press »7« to end playback.
« displaying title informations.
note:
7
Sequence and the names of files and folders
in vTuner menu is updated by the vTuner
server. Thus, it may vary.
4
5
Press » « to return to the previous catego-
<
ry.
Press »GuiDe« to exit the vTuner function.
-40
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
usB-reCorDinG---------------------------------------------------------------------------------------------------------------
possible-limitations-when-using-
an-external-data-medium
Depending on the broadcaster, you may experi-
ence various restrictions on some of the functions
from some television channels.
information-on-recording-and-
playing-television-programmes
Recording and playback of television pro-
grammes is only possible with digital television
channels (DVB-S, DVB-T and DVB-C).
■
■
The digital television channels (DVB-S, DVB-T
and DVB-C) you are able to record and play-
back also depends on the broadcaster.
GrunDiG-has-no-influence-on--
these-restrictions.
■
Recording a programme on the external data
■
Recording and playback of programmes,
medium can be disabled by the broadcaster.
If the message »URI* protected! PVR function
is blocked« appears on the screen, then re-
cording or timeshift is restricted (one recording
possible) or disabled (recording not possible)
by the broadcaster.
as well as the time shift function, can only be
carried out using an external data medium
(hard drive or USB stick). The data medium
should have a minimum storage capacity
of 2 GB.
* URI = User right information (Copyright in-
formation).
■
Recordings can be made with most data media
on the market. However, we cannot guarantee
operation for all data media.
■
If you record and save a programme on the
archive of an external data medium, playback
can be restricted.
The broadcaster can allow you to view this
programme one or more times, but it may only
be available for a certain period of time.
■
If a programme was recorded on an external
data medium, it can only be played back on
your television set. The playback of these pro-
grammes is not possible on other devices.
■
If you send your television to be repaired and
■
Programmes not suitable for minors will require
hardware components need to be replaced,
you might not be able to play the recordings
again on the repaired television.
the input of a PIN number immediately before
recording starts. If this authorisation is not
given, the recording may not start.
■
Reception for SKY broadcasting service is cur-
rently only possible in Germany with a suitable
set-top box or suitable CA module.
■
Copying a programme from a digital television
channel onto a video or DVD recorder using
the »Av- 1« socket (analogue picture/
sound signal) can also be restricted by the
broadcaster. Prerequisite is that your device
supports the copying function.
■
Grundig does not accept liability for any loss
of saved data on an external data medium.
-41
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
usB-reCorDinG---------------------------------------------------------------------------------------------------------------
notes:
Connecting-external-data-media-
notes:
7
The »usB1« socket of the television sup-
plies a maximum power of 500 mA in ac-
cordance with USB specifications. External
hard disks which require more power may
therefore only be connected to the »usB2-
(HDD)« of the television.
7
Before connecting the data medium, switch
the television to standby with . Connect
»8«
the device and then switch the television on
again.
7
7
Before removing the external data medium,
the television must be switched to standby,
so that no data loss occurs.
7
If you use a network cable for external hard
disks which have been connected to the
»usB2-(HDD)« socket of the television, this
network cable must also be disconnected
from the power supply when the television is
switched off.
Your television features two USB sockets,
»usB1« and »usB2-(HDD)«.
»usB2-(HDD)«isusedtoconnectdatamedia,
which require an additional power supply
– for example, external hard disks.
7
External data media may not be disconnect-
ed from the television while files on the data
medium are being accessed.
settings-for-usB-recording
selecting-the-menu
1
Open the menu with »menu«.
2
Select the line »USB RECORDING« with
»
v« or »Λ« and press »oK« to confirm.
– The »USB RECORDING« menu appears.
20.09.2010
15:46
USB RECORDING
OK
PRnP
Auto Preview
On
1
2
Connect the »usB2-(HDD)« socket of the
television and the corresponding socket of
the data medium (external hard disk) using
a USB cable;
Manage data medium
Safely Remove Disk
Disk
USB
C:
Partition
or
Capacity Used
%3
1249
Used (MB)
insert the USB plug of the USB memory stick
into the »usB1« socket of the television.
Total (MB)
38145
Remaining SD recording time
Remaining HD recording time
1,008 min
288 min
Confirm the display »
(green).
– The file browser appears.
« with »
«
Exit
Back
-42
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
usB-reCorDinG---------------------------------------------------------------------------------------------------------------
switching-on-automatic-preview
testing-the-external-data-medium
If the automatic preview is switched on, a pre-
view of the selected file appears in the file
browser.
You can subject external data media to a test
and establish whether they are suitable for the
chosen functionality.
1
2
3
Select the line »Auto Preview« with »
«.
v« or
1
2
3
Select the line »Disk« with »v« or »Λ«. If
»Λ
several data media are connected, select the
preferred data medium with » « or » «.
Switch on the function with » « or » «
<
>
« or »
<
>
(»On«).
Select the line »Partition« with »
v
Λ«.
If several partitions are available, select the
partition you wish to use with » « or » «.
Press »menu« to end the setting.
<
>
safely-remove-disk
1
Select the line »Check Disk« with »
v
« or
Select the line »Safely Remove Disk« with
« or » « and press »oK« to confirm.
»
Λ« and press »oK« to confirm.
Information on the data medium is dis-
played.
»v
Λ
–
note:
7
The disk can now be removed from the
socket.
4
Press »menu« to end the setting.
selecting-external-data-media
If several external data media are connected to
the television, you can select the preferred data
medium.
1
2
Select the line »Disk« with »v« or »Λ«
Select the preferred data medium with » «
<
or » «.
>
3
Press »menu« to end the setting.
selecting-a-partition-on-the-external-
data-medium
If the external data medium features several par-
titions, select the partition you would like to use.
1
2
Select the line »Partition« with »v« or »Λ«.
Select the partition you wish to use with » «
<
or » «.
>
3
Press »menu« to end the setting.
-43
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
usB-reCorDinG---------------------------------------------------------------------------------------------------------------
″pausing”-time-shift--
programmes
You can pause the programme you are watch-
ing. This is a useful function, for example if the
telephone rings while you are watching a film
and you do not want to miss anything.
recording-programmes
You can record programmes. The data for these
programmes is recorded on an external data
medium and this archive is administered via the
television.
You need 44 MB till 110 MB of memory
capacity on the external data medium for
1 minute recording time.
A freeze-frame display of the last scene appears
on the screen and the programme is recorded
in the time shift memory of the external data
medium.
While recording, you can watch another pro-
gramme from the archive.
In time shift mode you can record a maximum of
20 minutes of the current programme.
You cannot change presets.
one-touch-programme-recording
1
Press »!« to pause the current programme.
– The picture is frozen, the time shift and the
remaining recording time are displayed.
1
Select the television channel to be recorded
with » »1…0« or »p+«, »p–« and press
»
« to start the recording.
2
Press »8« to resume the programme.
– Information on the recording is displayed:
the recording symbol, the channel name,
the programme, the recording time and the
available memory space.
– After a short time this information disap-
pears.
–
The programme will continue to be
recorded.
note:
7
The following functions are possible when in
time shift mode:
– Rewind, press »3« several times accord-
ing to speed (the picture freezes while
rewinding);
– Fast forward, press »4« several times
according to speed;
– Select pause with »!«.
2
3
End the recording with »7«.
Confirm the display with » « (green);
or
press » « (red) to continue the recording.
notes:
3
Press »7« to quit the time shift function.
– The message »Live programme« appears,
and you will see the current programme
without time shift.
– The scenes in the “time shift memory” are
deleted.
7
After the recording is complete, the record-
ing will be automatically saved on the exter-
nal data medium.
7
The »RECORDED FILES« menu, with the ar-
chived programmes, can be opened with
»reC.list«.
7
If the external data medium is disconnected
from the USB socket during recording, the
recording will be stopped automatically
and will not be saved.
7
Play your recordings, that you have record-
ed with your FAT32 formatted HDDs, in USB
mode.
-44
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
usB-reCorDinG---------------------------------------------------------------------------------------------------------------
recording-a-programme-from-the-
channel-list
presetting-programmes-to-be-
recorded
1
Open the »CHANNEL LIST« with »oK«
Select a television channel with » «, »
» « or » « and press »oK« to confirm.
.
...-using-the-electronic-tv-guide
You can use data from the electronic TV guide
for recording.
2
v
Λ«,
<
>
3
4
Press »menu« to exit the channel list.
25 programmes can be preset for the timer
recording or as a reminder.
Press » « to start recording.
– Information on the recording is displayed:
the recording symbol, the channel name,
the programme, the recording time and the
available memory space.
– After a short time this information disap-
pears.
1
Press »GuiDe« to display channel informa-
tion.
– The electronic TV guide appears.
2
3
4
5
Select the preferred channel with »
v«
or »Λ«.
Switch to the information about the current
5
6
Press »7« to stop recording.
programme with » «.
>
Confirm the display with » « (green);
Select the programme of your choice with
or
»
v« or »Λ«.
press » « (red) to continue the recording.
Confirm the programme with »
«.
– The symbol » « appears after the name
of the programme, and the data has been
added to the timer.
note:
7
If the data for the recording is to be changed,
use
»
« (yellow) and
»
« (blue) to
switch to the »SCHEDULED EVENTS«, press
»
»
«(green),changethedataandsaveitwith
« (green)
.
6
Press »menu« to exit the menu.
notes:
7
Before the timer recording begins, a warn-
ing message appears with a 20-second
countdown. You can switch over to the pro-
grammed television channel.
7
If the timer recording starts during playback,
playback is not interrupted: Recording takes
place automatically in the background as
long as you do not select »Yes« when the
timer countdown message is shown.
-45
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
usB-reCorDinG---------------------------------------------------------------------------------------------------------------
...-by-manual-data-entry
You can preset up to 25 programmes for timer
recording.
editing-recording-data-in-the--
timer-menu
You can edit the data for programmed timer
recordings.
1
Press »GuiDe« to display channel informa-
tion.
– The electronic TV guide appears.
1
Select the timer menu by pressing »GuiDe«
sion.
,
»
« (yellow) and « (blue) in succes-
»
2
3
Open the »MAKE SCHEDULE« menu by
– The »SCHEDULED EVENTS« menu ap-
pears.
pressing » « (yellow) twice.
Select the line »Type« with »v« or »Λ«
2
3
Select the title of the programme to be
and select the option »Recording« with » «
<
changed with »
v« or »Λ« and activate the
or » «.
>
timer position with
»
« (green).
4
5
Select the line »Channel« with »
v
« or »
>
Λ
«
– The input menu is displayed.
and select the channel with » « or » «.
<
Select the required option with »
« and edit the data with »1…0« and
» « or » «.
v« or
Select the line »Mode« with »v« or »Λ« and
»Λ
select the preferred mode (»Once«, »Every
Day« or »Weekly«) with » « or » «.
<
>
<
>
4- Save the changes with » « (green).
6
7
Select the line »Start« (Start recording) with
« or » « and enter the date/time with
»1…0«.
– The timer has been changed.
»
v
Λ
5
Press »menu« to close the menu.
Deleting-recording-data-in-the-timer-
menu
You can delete the data for programmed timer
recordings.
Select the line »End« (Stop recording) with
« or » « and enter the date/time with
»1…0«.
»v
Λ
8- Save the data with » « (green).
1
Select the timer menu by pressing »GuiDe«
sion.
,
– The programme is preset.
»
« (yellow) and « (blue) in succes-
»
9
Press »menu« to exit the menu.
notes:
Before the timer recording begins, a warn-
– The »SCHEDULED EVENTS« menu ap-
pears.
7
ing message appears with a 20-second
countdown. You can switch over to the pro-
grammed television channel.
2
3
Select the title of the programme to be deleted
with »
with
v« or »
Λ« and delete the timer position
»
« (yellow)
.
7
If the timer recording starts during playback,
Press »menu« to close the menu.
playback is not interrupted: recording takes
place automatically in the background as
long as you do not select »Yes« when the
timer countdown message is shown.
-46
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
usB-reCorDinG---------------------------------------------------------------------------------------------------------------
playback
The recorded programmes – whether started
playback-during-a-recording
During a recording, you can either watch the
manually or using the timer function – are stored
programme you are currently recording or watch
on the external data medium. You can open the
a different one that you have already recorded.
archive on the external data medium by pressing
1
Select the channel to be recorded with
»1…0« or »p+«, »p–« and press »
start the recording.
»reC.list«.
« to
selecting-a-programme-from--
the-archive
2
Select the »Recorded Event« menu by press-
ing »reC.list«.
1
Open the »Recorded Event« menu with
»reC.list«
.
3- Select the programme you want with »
v
« or
– The menu appears.
»
Λ
« and press »8« to start playback.
2
3
Select the programme of your choice with
–
The recording continues in the background.
»
v« or »Λ« and start playback with »8«.
4
5
Press »7« to end playback.
Press »7« to end playback.
– The television switches over to the current
television channel.
Press »7« to stop recording.
Deleting-programmes-in-the-
recording-list
You can delete programmes from the record-
ing list.
Forward/reverse-picture-search
1
During playback, select the fast forward
speed (2x, 4x, 8x, 16x or 32x) with »4«;
or
1
2
Open the »Recorded Event« menu with »reC.
list«
.
during playback, select the rewind speed
(2x, 4x, 8x, 16x or 32x) with »3« (the pic-
ture freezes when rewinding).
– The menu appears.
Select the programme to be deleted with
»
v« or »Λ«.
repeating-a-scene-(A-B)
You can mark the starting and ending point of a
scene. The scene is then repeated continuously.
3
4
Press »« (blue) to delete the programme.
Confirm the security query with
»
«
(green)
.
1
Mark the starting point A by pressing »8« at
the required scene during playback.
–
note:
This scene is marked as the starting
point A.
7
You cannot delete programmes in the
»Recorded Event« menu which are currently
being recorded or played back.
2
Mark the end point B by pressing »8«
once again at the required scene during
playback.
5
Press »menu« to close the menu.
– This scene is marked as the end point B.
– The television repeats the programme be-
tween these two points.
3
Quit the repeat function with »7«.
-47
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
usB-operAtion----------------------------------------------------------------------------------------------------------------
image-data
File-formats
Your television can display pictures in the formats
JPEG, PNG and BMP.
Your television can work with the following file
formats using the USB sockets:
JPEG stands for Joint Picture Experts Group.
It denotes a process for compressing picture files.
PNG and BMP are process used to save image
data with no, or very little, losses.
Picture files can be stored with other types of files
on one medium.
These files can be organised into folders and
subfolders.
video-data
Special codecs for video compression and
decompression provide more memory space
without compromising the picture quality exces-
sively.
Your television plays video files in the formats
DIVS, XVID, H.264/MPEG-4 AVC (L4.1, 4 ref-
erence pictures), MPEG-4, MPEG-2, MPEG-1,
MJPEG and MOV.
The following file name extensions are also sup-
ported: AVI, MKV, MP4, TS, MOV, MPG, DAT,
VOB. These files can also contain audio files
compressed using MP3, AAC or Dolby Digital©.
Audio-data
Your television can play audio data in the for-
mats MP3, AAC, WMA.
MP3 is the abbreviation for MPEG-1 Level 3 and
is based on the MPEG-1 standard, which was
developed by the MPEG (Motion Picture Expert
Group).
AAC stands for Advanced Audio Coding and
was also developed by MPEG. AAC provides
better sound quality at an identical data rate.
WMA (Windows Media Audio) is a compres-
sion standard for audio data developed by
Microsoft.
These formats allow audio files to be recorded
and played which sound as good as a CD, while
taking up only a fraction of the memory space.
File name extensions which are supported: MP3,
MP2, WMA, M4A, AAC.
MP3 files can be organised into folders and
subfolders, as on the computer.
-48
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
usB-operAtion----------------------------------------------------------------------------------------------------------------
Connecting-external--
data-media-
Before connecting the data medium, switch the
television to standby using »8«. Connect the
device and then switch the television on again.
Before removing the external data medium,
the television set must be switched to standby,
so that no data loss occurs.
notes:
7
The »usB1« socket of the television set
supplies a maximum power of 500 mA in
accordance with USB specifications. Exter-
nal hard disks which require more power
may therefore only be connected to the
»usB2-(HDD)« of the television set.
7
1
2
Connect the »usB2-(HDD)« socket of the
television and the corresponding socket on
the data device (external hard drive, digital
camera, card reader or MP3 player) using a
USB cable;
If you use a network cable for external hard
disks which are connected to the »usB2-
(HDD)« socket on the television, this net-
work cable must also be disconnected from
the power supply when the television is
switched off.
or
7
7
External data media may not be disconnect-
ed from the television set while files on the
data medium are being accessed.
insert the USB plug of the USB memory stick
into the »usB1« socket of the television set.
Confirm the display »
(green)
– The file browser appears.
« with
»
«
A bi-directional data transfer as defined for
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
.
7
USB transfer is not in itself an operating
mode. It is only an additional function.
-49
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
usB-operAtion----------------------------------------------------------------------------------------------------------------
the-file-browser-
The file browser displays video, audio and
picture files stored on external data media.
settings-in-the-usB-setup-menu
selecting-the-menu
1
Press »
«, use »v«, »Λ«, » « or » « to
<
>
If an external data medium contains files in
different formats, you can, when necessary, filter
out the formats not required.
select the preset »USB« and press »oK« to
confirm.
2
3
Open the menu with »menu«.
main-menu-of-the-file-browser
Select the »SOURCE SETUP« menu item with
»
v« or »Λ« and press »oK« to confirm.
1
4
3
–
The »SOURCE SETUP« menu appears.
note:
7
Additional functions are explained in the
following sections.
VIDEO FILES
ROOT
Photo
Music
Film
switching-on-automatic-preview
If this function is switched on, a preview of the
selected file then appears in the file browser.
USB DRIVE
Used (MB)
Total (MB)
%3
475
45
1
Select the line »Auto Preview« with »
v«
or »Λ«.
Use Control
Buttons
x1
Speed
All
Repeat
Now
Total
2
Switch on the function with » « or » « (»On«).
<
>
note:
6
2
5
7
Viewing mode can not be change while 3D
mode is active.
1
2
3
Selected data format.
Name of the data medium.
Total number of folders on the data medium.
3
Press »menu« to end the setting.
selecting-the-display-mode
1
Select »View Mode« with »v« or »Λ«.
4- Preview of the selected file.
2- Select the preferred option with » « or » «.
<
>
5- Information on the external data medium.
3
Press »menu« to end the setting.
6
Menu navigation.
setting-the-display-duration-for-
pictures-in-a-slideshow
1
Select »Slide Show Interval« with »v« or »Λ«.
2
Selectthedisplayduration(3, 5, 10 seconds)
with » « or » «.
<
>
3
Press »menu« to end the setting.
-50
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
usB-operAtion----------------------------------------------------------------------------------------------------------------
Divx®-voD
Basic-playback-functions-
You must have your device registered in order to
play the protected video that you will buy from
DivX®.
1
Select the data medium by pressing »
«,
use » «, » «, » « or » « to select the option
v
Λ
<
>
»USB« and press »oK« to confirm.
– The file browser appears.
1
Select »DivX® VOD« with »
confirm with »oK«
– Registration Code appears.
v« or »Λ« and
.
2
3
Select the file format (video files, audio files,
picture files) with » « or » «.
v
Λ
2
3
device with the registration code.
Switch to the folder/file list with »oK«.
note:
Press »menu« to end the setting.
7
USB data medium with several partitions is
connected to the USB sockets, the letter for
the respective drive (e.g. C) appears behind
the folder symbol. Select the letter of the
DivX Certified® to play DivX® and DivX
Plus™ HD (H.264/MKV) video up to
1080p HD including premium content.
drive with »
confirm.
v« or »Λ« and press »oK« to
ABOUT DIVX VIDEO: DivX® is a digital video format created
by DivX, Inc. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software
tools to convert your files into DivX video.
4
5
Select the folder or file with »v« or »Λ« and
press »oK« to open it.
– A list of subdirectories appears.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® de-
vice must be registered in order to play purchased DivX Video-
on-Demand (VOD) movies. To obtain your registration code,
locate the DivX VOD section in your device USB setup menu.
Go to vod.divx.com for more information on how to complete
your registration.
note:
7
Switch back to the main folder with » «.
<
Select the track or picture with »
and press »8« to start playing.
You can view information on the film data by
pressing »?«.
v« or »Λ«
–
– When playing MP3 or WMA data, infor-
mation on the album, track and singer is
displayed at the left of the menu.
– When playing picture files, you can use
»?« to display information about the reso-
lution and size.
– When playing picture data, press »
?«
®
twice to enter the DivX Settings menu.
note:
7
When playing picture data, the file browser
7
switches off. Press » « to display the file
browser again.
6
Press »!« to pause playback.
7- Press »8« to resume normal playback.
7
8
Press » « to end playback.
The file browser appears.
-51
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
usB-operAtion----------------------------------------------------------------------------------------------------------------
notes:
Additional-playback--
functions
Depending on the file format, the following
additional functions are available:
7
Use »Λ« to select »Up Folder«, when you
would like to return to the last folder. Use
»Root« (and then press »oK«) to return to
the main folder.
selecting-chapters-on-Divx®-files
(only video files)
7
It is possible that files which are actually
supported do not function correctly in USB
mode. This is because certain files are not
recorded with standardised compression
processes, although they feature the “right”
file ending.
1
During playback, select the next chapter
with » «.
>
2
During playback, select the previous
chapter with » «.
<
7
7
7
If a video file features several audio tracks
(audio streams), you can switch these over
dFuring playback in full screen mode with
» «.
note:
7
You can also select chapters by entering the
chapter number with »1...0«.
When playing music files, you can use other
options in the USB mode at the same time.
This way, you can, for example, enhance a
slideshow with music.
selecting-titles-on-Divx®-files
(only video files)
1
During playback, select the next title with
«.
»Λ
For films, only subtitles in the .SRT,
.ASS, .SSA, .SMI format are sup-
ported. The names of the subtitle and
film files must be identical. Otherwise,
no subtitles will be shown.
2
During playback, select the previous title
with » «.
v
playing-selected-titles
Only the marked tracks are played.
Subtitle function is only supported in movies
that you will watch in 3D mode.
1
Select the titles with »
»oK« to mark it.
v« or »
Λ
« and press
2
Select the next title with »
v
« or » « and
Λ
press »oK« to mark it.
3
4
Start playback with »8«.
7
Press » « to end playback.
note:
7
To remove the marking, select the title with
« or » « and press »oK« to remove the
marking.
»v
Λ
-52
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
usB-operAtion----------------------------------------------------------------------------------------------------------------
selecting-a-track-or-picture-in-steps- repeat-functions
(sKip)
Options:
– »One Repeat«: the current track will be
1
During playback, select the next track/
picture with »6«.
repeated.
– »All Repeat«: all tracks will be repeated.
2
During playback, select the previous track/
picture with »5«.
1
Switch off the repeat function before play-
back with »tools«.
– Playback begins with the track or picture
you selected.
2
3
Start playback with »8«.
Deactivate the repeat function with
»tools«.
– The display changes to »None Repeat«.
selecting-a-certain-passage-for-
playback-
(video files only)
1
2
During playback, press »oK«
Enter the passage (time) with »1-...-0« and
press » « (green) or »oK« to confirm.
.
Fast-forward
(for video and audio files only)
You can select different speeds (2-fold, 4-fold,
8-fold,16-fold and 32-fold forwards and back-
wards).
1
Select the playback speed during playback
with »3« or »4«.
2- Press »8« to resume normal playback.
rotating-pictures-
(picture files only)
You can rotate pictures by 90°.
1
During playback, press » « or « to rotate
the pictures by 90°.
<
>
-53
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
teletext-operAtion-----------------------------------------------------------------------------------------------
enlarging-the-character-height
If you have difficulty reading the text on the
screen, you can increase the character height.
top-text-or-FloF-text-mode
1
Press »txt« to switch on teletext.
2
Select teletext pages directly with »1...0«
1
To enlarge the character height of a teletext
page, keep pressing »5«.
or step by step with »v« and »Λ«.
Return to teletext page 100 with »?«.
note:
page-hold
7
At the bottom of the screen there is an info
A multiple page may contain several sub-pages,
which are automatically scrolled by the broad-
casting station.
bar with red, green and – depending on the
channel – yellow and blue panels. Similarly,
the remote control also features buttons with
different colours with which these pages can
be selected.
1
Stop the automatic scrolling of the sub-pages
with »3«.
2- Quit the function with »3«.
3
4
5
Go back a page with » « (red).
Go to the next page with » « (green).
opening-a-sub-page-directly
Select a particular chapter with
»
«
If the selected teletext page contains additional
pages, the number of the current sub-page and
the total number of pages are displayed.
(yellow)
.
6- Select a particular subject with »
« (blue).
1- Press » « to open the sub-page function.
2- Use » « or » « to select the sub-page.
7
Quit teletext with »txt«.
<
>
normal-text-mode
1
3- Quit the function with » «.
Press »txt« to switch on teletext.
revealing-answers
Certain teletext pages contain hidden answers
or information.
2
Press »1…0« to select teletext pages directly.
Return to teletext page 100 with »?«.
3
4
5
Go back a page with »v«.
1
Display information with »4«.
Go to the next page with »Λ«.
2- Press »4« to conceal the information.
Quit teletext with »txt«.
note:
split-screen
7
Teletext feature is not supported in 3D mode.
This functions allows you to display the televi-
sion channel on the left side, the teletext on the
right side.
Additional-functions
1
Switch the function on with »7«.
– The television channel and teletext are dis-
played next to each other.
skipping-the-waiting-time
While a page search is progressing, you can
switch to the TV programme.
2
Switch the function off with »7«.
1
Enter the teletext page number with »1…0«
and then press »6«.
– As soon as the page is found, the page
number is displayed.
2
Press »6« to switch to the teletext page.
-54
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
interACtive-portAl-(HBBtv)---------------------------------------------------------------
what-is-Hbbtv?
The ARD offering includes, for example, a de-
tailed programme overview, the full offering of
"Das Erste1Mediathek” as well as graphical re-
structured teletext with high-definition pictures.
The ZDF offering includes the "ZDF mediathek"
and other programme information (as of Septem-
ber 2011).
To put it simply, HbbTV provides next-generation
interactive teletext with modern structured con-
tent, high-definition pictures and video sequenc-
es, and interactivity.
To receive HbbTV, the television must be con-
nected to the internet.
ARD is currently offering this new service with its
"third programmes", as is ZDF.
The HBBTV Service is only available in some
countries.
Das Erste Mediathek
Alle Mediatheken
Impressum
3
4
l 15:11 Uhr 08.08.2011
Neueste Clips
Sendungen A - Z
?Sendung verpasst
5 / 5
A
Heute 08.08.2011
ABC
5
Alina
ARD-Mittagsmagazin
Tagesschau
Tagesschau
Tagesschau
Tagesschau
01:43
04:47
14:00
14:10
06.08.11
.min 18
ARD-Ratgeber: Auto + Verkehr
ARD-Ratgeber: Bauen + Wohnen
ARD-Ratgeber: Geld
nachtmagazin
ARD-Ratgeber: Gesundheit
ARD-Ratgeber: Heim + Garten
ARD-Ratgeber: Recht
aus:Nachtmagazin
ARD-Ratgeber: Reise
ARD-Sondersendung
Ausblenden
0
Hilfe
1
Ausblenden
Programm
Mediathek
Videotext
2- Select your required subject area with »
«
Hbbtv-operation
When you switch to a TV programme that sup-
ports HbbTV, an information message is dis-
played if HbbTV is available.
(green), » « (yellow) or »
« (blue).
3- In your selected subject area, choose the re-
quired option using »
v
«, »
Λ«
,
» « or » «
<
>
and confirm with »oK«
.
1
Switch on HbbTV with » « (red).
4- Switch on HbbTV with » « (red).
– Information about the service is displayed
on the screen. In addition, the coloured
keys required for navigation are also dis-
played.
Additional-functions-for-video-
sequences
1- Start playback with »8«
.
note:
2- Pause playback with »!«.
7
The range of subject areas and the selection
of the individual subject areas is dependent
on the each programme provider.
3- Continue playback with »8«.
4- Rewind with »3« or forward with »4«.
7
The number buttons »1« to »0« are used for
additional functions.
7
5- Stop playback with » «.
-55
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ConvenienCe-FunCtions-------------------------------------------------------------------------
Changing-the-audio-language
(only for digital television channels)
opening-the-settinGs-menu
1
Open the menu with »menu«.
You can define a primary and a secondary
audio language.
2
Select the »SETTINGS« menu with »v« or
»
Λ« and press »oK« to confirm.
– The »SETTINGS« menu appears.
1
Select the line »Audio« with »v« or »Λ« and
press »oK« to confirm.
20.09.2010
15:46
–
The »Select Audio Language« menu
SETTINGS
appears.
2
Select the audio language with » «, » «,
<
>
Language settings
»v« or »
Λ« and then use » « (red) to set
it as the primary audio language, or use
English
English
Menu
»
« (green) to set it as the secondary audio
Audio
Subtitle
language.
English
Off
– The primary and secondary language is
display at the top right in the menu.
Subtitle Mode
Date and time settings
3
Press »menu« to end the setting.
Date & Time
Changing-the-subtitle-language-
and-subtitle-mode
(only for digital television channels)
Time Adjustment
Time Zone
Auto
GMT +1
You can switch the subtitles on and off, select the
subtitle language and allocate a second subtitle
language.
Exit
Back
note:
1
Select the line »Subtitle« with »v« or »Λ«
and press »oK« to confirm.
7
Additional operations are explained in the
following sections.
– The »Select Subtitle Language« menu ap-
pears.
language-settings
2
Select the subtitle language with »
v«,
»Λ
«, » « or » «, then use » « (red) to set
<
>
Changing-the-menu-language
it as the primary subtitle language, or use
1
Select the line »Menu« with »v« or »Λ« and
»
« (green) to set it as the secondary subti-
press »oK« to confirm.
tle language.
–
The »Select Menu Language« menu
appears.
– The primary and secondary language is
displayed at the top right in the menu.
2- Select the menu language with » «, » «,
<
>
3
4
To go back one menu level, press » «.
<
»v« or »Λ« and press »oK« to confirm.
Select the line »Subtitle Mode« with »v« or
3
Press »menu« to finish the setting.
»
Λ« and then set the preferred option »Off«,
»Hard of Hearing« or »Basic« with » « or
<
» «.
>
5
Press »menu« to end the setting.
-56
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ConvenienCe-FunCtions-------------------------------------------------------------------------
setting-the-date-and-time
Automatic-setting
Your television set detects the difference in time to
Greenwich Mean Time (GMT) automatically, as
long as the channel selected transmits a time signal.
timer-settings
entering-the-switch-off-time--
(sleep-timer)
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
1
Select the line »Date & Time« with »
« and press »oK« to confirm.
v
« or
»
Λ
1
Select the line »Sleep Timer« with »
»Λ«.
v« or
2
Select the line »Auto« with »v« or »Λ
« and
press »oK« to confirm.
– Date and Time will be updated automatically;
2
Enter the switch-off time with » « or » «.
<
>
or
note:
7
To switch off the function, use » « or » « to
set the switch-off time to »Off«.
<
>
3
Select the input box with »v« or »Λ«, enter
the data for Date and Time with »1...0«
and press »oK« to confirm.
3
Press »menu« to end the set-up.
manual-setting
switch-on-timer
You can also set the difference in time manually
– for example, when the correct time is not de-
tected automatically or does not correspond to
local time for other reasons
In the »Auto On« menu you can enter a switch-on
time for the television. After the preset time has
elapsed, the television switches on from standby
– at the preselected volume and the preselected
television channel.
1
2
Select the line »Time Adjustment« with »v«,
then select the option »Manual« with » «
1
Select the line »Auto On« with
»v
« or »
Λ«
<
or » «.
and press »oK« to confirm
.
>
– The lines »Time Zone« and »Daylight Sav-
ing« are active.
2
Select the line »Mode« with
»
v
« or » and
Λ«
use » « or » « to select when the television
<
>
Select the line »Time Zone« with »v« and
should switch on.
press »oK« to confirm.
3
4
Select the line »Input Source« with
»v« or »Λ«
– The »Select Time Zone« menu appears.
and use » « or » « to select the input source.
<
>
3- Select the appropriate time zone with » «,
<
Select the line »Service Type« with
»v« or »Λ«
» «, »
v
« or »
Λ
« and press »oK« to con-
>
and use » « or » « to select the preferred op-
<
>
firm.
tion (ATV, DTV, Radio or DATA).
Select the line »Channel« with
4
5
Select the line »Daylight Saving« with »
v«
5
»v« or »Λ«
and use » « or » « to set the option »Auto«,
<
>
and use » « or » « to select the preferred
<
>
»Off« or »On«.
channel.
Press »menu« to finish the setting.
note:
note:
7
The line »Channel« is only active when the in-
put signal currently in use has been set. If no
entry has been made, then the first channel of
the selected input source will be used.
7
If the option »Auto« is selected in the line
»Time Adjustment«, the television set auto-
matically adapts the time to the time signal
from the respective broadcaster. However,
different channels may also use time bases
which are different to those of your country;
e.g. foreign broadcasters. In these cases,
reminders and planned recordings may be
annulled due to the time difference.
-57
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ConvenienCe-FunCtions-------------------------------------------------------------------------
6
Select the line »Volume« with
»
v
« or »
Λ
«
and
parental-control-settings
Authorising-programmes
There are films which may be wholly or partially
unsuitable for children.
use » « or » « to set the volume.
<
>
7
Select the line »Set Hour« with
»
v« or »Λ«
and enter the time with »1…0«.
8- Save the data with » « (green).
These programmes contain information which
marks the content or scenes with access levels of
4 to 18. You can select one of the access levels,
thereby authorising playback.
note:
7
You can abort the entry by pressing » « (red)
.
9
Press »menu« to end the setting.
1
Select the line »Parental Guidance« with
« or » « and press »oK« to confirm.
switch-off-timer
»v
Λ
In the »Auto Off« menu, you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
2
3
4
Enter the PIN code »1234« with »1-...-0«.
Select the access level with » « or » «.
<
>
Press »menu« to end the setting.
1
2
3
Select the line »Auto Off« with
»
v
« or »
Λ«
locking-menus
and press »oK« to confirm
.
This function allows you to lock the »Automatic
Channel Search«, »Digital Manual Tuning«, »An-
alogue Manual Tuning« and »Program Table«
menus so that they can be only accessed by
entering a PIN code.
Select the line »Mode« with
»
v
« or » and
Λ«
use » « or » « to set the preferred mode.
<
>
Select the line »Set Hour« with
»v« or »Λ«
and enter the time with »1…0«.
4- Save the data with » « (green).
1
2
3
Select »Menu Lock« with »v« or »Λ«.
note:
Enter the PIN code »1234« with »1-...-0«.
7
You can abort the entry by pressing » «
(red).
Activate the lock with » « or » « (»On«).
<
>
note:
5
Press »menu« to end the setting.
7
To switch off the menu lock, use » « or » «
to select the setting (»Off«).
<
>
Automatic-switch-off-(Auto-sleep)
If this function is activated, the television switches
automatically to standby after 5 minutes if no
video signal is broadcast or in accordance with
the according to European regulations, the tel-
evision switches automatically to standby after 4
hours provided that none of the buttons on the
remote control or on the television is operated
during this period.
4
Press »menu« to end the setting.
locking-keys-(parental-lock)
When the key lock is activated, the buttons on
the television set do not function.
1
Select the line »Keypad Lock« with »
«.
v« or
»Λ
2
Enter the PIN code »1234« with »1-...-0«.
1
Select the line »Auto Sleep« with »
v« or
3- Activate (On) or deactivate (Off) the key lock
»Λ«.
with » « or » «.
<
>
2
Activate the function with » « or » «
<
>
4
Press »menu« to end the setting.
(»On«).
note:
7
To switch off the function, use » « or » « to
<
>
select the setting »Off«.
3
Press »menu« to end the setting.
-58
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ConvenienCe-FunCtions-------------------------------------------------------------------------
Changing-the-pin-code
updating-software-(oAD)
You can also enter a personal PIN code instead
of the default code »1234«. Please take note of
your own PIN code.
(from satellite, for digital channels only)
1
In the »SETTINGS« menu, select the line
»Check For OAD Updates updates« with
»v« or »Λ« and press »oK« to confirm.
1
2
3
4
5
Select »Set PIN« with »v« or »Λ« and press
»oK« to confirm.
– A search for new software will be made
and – if available – it will be installed.
Enter the current PIN code 1 2 3 4 with
»1-...-0«.
note:
7
If a search for software updates should be
Enter your new four digit PIN code with
»1-...-0«.
made automatically, select the line »Auto-
matic OAD Update« with »v« or »Λ« and
Enter your new four digit PIN code with
»1-...-0« again.
use » « or » « to select the option »On«.
<
>
– The software will be updated automati-
cally as far as possible.
Press »menu« to end the setting.
2
Press »menu« to end the setting.
locking-television-channels-
You can lock individual television channels, for
example channels unsuitable for children, using
a personal PIN code.
updating-software-(online)
(from the internet, for digital channels only)
1
In the »SETTINGS« menu, select the line
»Check For Online Updates updates« with
1
2
Open the menu with »menu«.
Select the »SOURCE SETUP« menu with »
or »Λ« and press »oK« to confirm.
v«
»
v« or »Λ« and press »oK« to confirm.
– A search for new software will be made
and – if available – it will be installed.
3
Select the line »Program Table« with »
v« or
»Λ« and press »oK« to confirm.
note:
– The »PROGRAM TABLE« menu is dis-
played.
7
If a search for software updates should be
made automatically, select the line »Auto-
4
5
6
7
In the »PROGRAM TABLE« menu, switch
matic Online Update« with »v« or »Λ« and
over to the list view with » « (yellow).
use » « or » « to select the option »On«.
<
>
– The software will be updated automati-
cally as far as possible.
Select the channel to be locked with »
or »Λ«.
v«
2
Press »menu« to end the setting.
Select the column »Lock« with » « or » «
and press »oK« to lock the channel.
<
>
restoring-the-television-to-the-
default-settings
Enter the PIN code »1234« with »1-...-0«.
– The channel is marked using »✔«.
This function allows you to delete the channel
lists and all custom settings.
note:
7
To remove the lock, select the channel again
1
2
3
In the »SETTINGS« menu, select the line
with »v« or »Λ«, press »oK« to confirm
»Restore Factory Defaults« with »v« or »Λ«
and then enter the PIN code 1 2 3 4 using
and press »oK« to confirm.
»1-...-0«.
Press » « (green) to confirm the warning
8
Press »menu« to end the setting.
message.
– The »Source Setup« menu appears.
Continue the settings with the chapter “Initial
set-up and tuning television channels” on
page 14.
-59
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
operAtion-usinG-externAl-DeviCes------------------------------
searching-for-and-activating--
external-devices
You can connect up to 11 devices with DIGI LINK
functions to your television.
DiGi-linK
Your television is equipped with
the DIGI LINK function.
This function uses the CEC
(Consumer Electronics Control)
protocol.
1
2
Open the Tools menu with »tools«.
Select the menu item »CEC« with »v« or
CEC allows external devices which are connect-
ed to the »HDmi« sockets by an HDMI cable
(e.g. DVD player) to be operated with a remote
control.
Prerequisite is that the devices connected support
CEC. Read the operating manual for the external
device to find out how to activate the correspond-
ing function.
»
Λ« and press »oK« to confirm.
– The »HDMI CEC Device List« appears.
2
Start the device search with » « (red).
The devices found are displayed in the
menu.
–
3- Select the device for operation with »
v«,
»
Λ
«, » « or » « and press »oK« to mark it.
<
>
– If the selected device is connected to a
different input to the current one, a switch
to the respective input will occur auto-
matically.
the-DiGi-linK-functions-on-your-
television
switching-on-the-television--
automatically-from-standby
4
Press »menu« to end the setting.
If the »Autom. switch-on TV« function is activated
(»On«), then once the external device (e.g.
DVD player) is switched on, the television also
switches on and the appropriate HDMI preset is
selected.
Automatic-selection-of-the-HDmi-
preset-on-the-television
If your television is switched on and you then
switch on the external device (e.g. DVD player),
the appropriate HDMI preset on the television
will be selected.
selecting-the-menu-language
The television menu language is automatically
selected on the external device (e.g. DVD player).
The external device must support this function.
switching-off-the-external-device-
automatically
If you switch your television to standby, the ex-
ternal device (if it is switched on) will also be
switched to standby.
DIGI LINK is always active on your television set.
-60
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
operAtion-usinG-externAl-DeviCes------------------------------
switching-the-device-to-standby
This option switches the external device to
standby.
Device-operation
You can decide whether external devices should
react to your television's remote control.
1
Press »
«, use »v«, »Λ«, » « or » « to
1
Press »
«, use »v«, »Λ«, » « or » « to
<
>
<
>
select the preset »HDMI1« to »HDMI4« and
press »oK« to confirm.
select the preset »HDMI1« to »HDMI4« and
press »oK« to confirm.
2
3
Open the menu with »menu«.
2
3
Open the menu with »menu«.
Select the menu item »SOURCE SETUP« with
Select the menu item »SOURCE SETUP« with
»
v« or »Λ« and press »oK« to confirm.
»
v« or »Λ« and press »oK« to confirm.
– The »SOURCE SETUP« menu appears.
– The »SOURCE SETUP« menu appears.
4
Select »Device Standby« with »v« or »Λ«
20.09.2010
15:46
and press »oK« to confirm.
SOURCE SETUP
– The external device switches itself off.
Source
HDMI1
DIGILINK
GRUNDIG DVD
RC Passthrough
Device Selection
Remote Control
Device Standby
Exit
Back
4
Select the line »Remote Control« with »
or » «.
v«
Λ
5- Select the type of operation (»RC Pass-
through«, »Deck« or »Tuner« with » « or
<
» «.
>
notes:
7
»RC Passthrough« can be used for all devices.
»Deck« and »Tuner« can be selected in ac-
cordance with the external device which
has been connected.
7
Try out which type of remote control opera-
tion the external device reacts to the best.
7
Read about the scope of functions of the
DIGILINK-compatible device in the respec-
tive operating manual.
6
Press »menu« to end the setting.
-61
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
operAtion-usinG-externAl-DeviCes------------------------------
High-definition--HD-ready
Connection-options
7
Which television socket(s) you connect your
Connect the corre-
external devices to depends on the sockets
the external device is equipped with and the
signals which are available.
sponding input sources
(e.g. HDTV receiver or
HD-DVD player) to the
»HDmi« sockets (for
digital HDTV sources).
7
Please note: With many external devices,
the resolution of the video signal must be
adjusted to the input sockets of the television
(see the operating manual of the external
device). You can find out which values you
need to set by referring to the guidelines in
the sections about the various connection
options.
This ensures that you can view digital HDTV
programmes, even if they are copy-protected
(HDCP High Bandwidth Digital Content Protec-
tion), without encountering problems.
7
Do not connect any other equipment while
the device is switched on. Also switch off the
other equipment before connecting it.
7
Do not plug in the power cord of the device
until you have connected the external equip-
ment and the antenna.
-62
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
operAtion-usinG-externAl-DeviCes------------------------------
...-using-the-sCArt-socket--
(CvBs/rGB-signal)
Connecting-external-devices
...-with-digital-audio/video-signals
7
Suitable devices: Digital satellite receiver,
7
Suitable devices: Digital satellite receivers,
DVD player/recorder, set-top box, games con-
sole, video recorder, decoder.
Playstation, BluRay player, DVD player/
recorder, set-top box, notebook, PCs.
7
Video signal: CVBS/RGB.
7
Video signal: Digital video; resolution: stand-
7
Audio signal: stereo, analogue.
ard 576p; HDTV 720p, 1080i, 1080p.
7
»AV1« preset.
7
Audio signal: digital audio (stereo, multi-chan-
nel compression, uncompressed).
1
Connect the »Av1/s-vHs« socket on the
television and the corresponding socket on
the external device using a SCART cable
(video and audio signal).
7
Presets »HDMI 1«, »HDMI 2«, »HDMI 3« or
»HDMI4«.
1
Connectthe»HDmi1«,»HDmi2«,»HDmi3«
or »HDmi4« socket on the television and the
corresponding HDMI socket on the external
device using a standard HDMI cable (digital
video and audio signal).
Activating-a-decoder
If a decoder is connected to the »Av1/s-vHs«
socket, this must be activated to provide an
unencrypted video/audio signal.
1
2
Open the menu with »menu«.
...-with-analogue-video-signal-
(progressive)
Select »SETTINGS« with »v« or »Λ« and
press »oK« to confirm.
– The »SETTINGS« menu appears.
7
Suitable devices: DVD recorders/players,
games consoles.
3
4
Select the »Decoder« with »
v« or »Λ«.
7
Video signal: YUV; resolution: standard 576p;
HDTV 720p, 1080i, 1080p.
Activate the function with » « or » «
(»On«).
Press »menu« to end the setting.
<
>
7
Audio signal: stereo, analogue.
7
5
»Component« preset.
1
2
Connect the »Component- Y- pb- pr«
sockets on the television to the correspond-
ing sockets of the external device with RCA
cables (video signal).
...-with-s-video-signal
7
Suitable devices: DVD player/recorder, video
recorder, camera recorder, notebook, PC.
7
7
7
Video signal: Y/C.
Connect the »Component-l-r« sockets
on the television to the corresponding sock-
ets of the external device with RCA cables
(audio signal).
Audio signal: stereo, analogue.
»S-VHS« preset.
1- Connect the » Av1/s-vHs« socket on the
television and the corresponding socket on
the external device using an EURO/AV ca-
ble (video and audio signal).
-63
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
operAtion-usinG-externAl-DeviCes------------------------------
...-with-an-analogue-tv-signal
using-a-DvD-player,-
DvD--recorder,-video-recorder--
or-set-top-box
7
Suitable devices: Digital satellite receiver,
DVD player/recorder, set-top box, camera
recorder.
1
Switch on the external device and select the
function you wish to use.
7
Video signal: CVBS.
7
Audio signal: stereo, analogue.
2
Press
»
«, use »v«, »Λ«, » « or » « to
<
>
7
»AV2« preset.
select the preset for the input signal (»AV1«,
»AV2«, »S-VHS«, »HDMI1«, »HDMI2«,
»HDMI3«, »HDMI4« or »Component«)
and press »oK« to confirm.
1
2
Connect the »video« socket on the
television to the corresponding socket of the
external device with an RCA cable (video
signal).
Headphones
Connect the »l--r« sockets on the television
to the corresponding sockets of the external
device with RCA cables (audio signal).
Connecting-the-headphones
1
Plug the headphone jack (3.5 mm ø jack
plug) into the headphone socket on the tel-
evision.
note:
7
There must not be a video signal at the »Av2«
and »Av1/s-vHs« socket at the same time.
Changing-the-headphone-volume
1
This could lead to picture disturbances.
Open the menu with »menu«.
2
Select the menu item »SOUND SETTINGS«
with »v« or »Λ« and press »oK« to confirm.
– The »SOUND SETTINGS« menu appears.
Select the line »Headphone« with » « or
«.
4
v
»Λ
5
6
Set the preferred volume with » « and » «.
<
>
Press »menu« to end the setting.
note:
7
Prolonged listening with headphones at loud
volumes can damage your hearing.
-64
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
operAtion-usinG-externAl-DeviCes------------------------------
notes:
Hi-fi-system
7
If the audio system also has a playing
Connecting-digital-multi-channel-
function (e.g. Home theater system, DVD
amplifier/Av-receiver
player), two devices will be listed on the
HDMI CEC list. The first one is the player,
and the second one is the audio playback.
With this connection, you can playback the
audio signal of the television channel via the
HDMI cable sur the multi-channel amplifier or
the AV receiver.
7
If a Blu-ray Player is connected to the AV
receiver, please remove the Disc from the
Player during the registration.
1- Connect the »HDmi2-(ArC)« (HDMI 1.4
Audio Return Channel) socket to the relevant
socket on the HDMI ARC compliant Digital
multichannel amplifier / AV receiver with a
standard HDMI cable (digital audio signal);
5
Press »menu« button to exit the HDMI
CEC device list.
6
7
Open the menu with »menu« button.
Select the menu item »SOUND SETTINGS«
or
with »v« or »Λ« and confirm with »oK«.
2- Connect the »optic-out« socket on the
television to the corresponding socket on the
AV receiver using a standard optic digital
cable (digital audio signal).
– The menu appears.
8
9
Select the line »Audio Output Setup« with
»
v« or »Λ« and confirm with »oK«.
– The menu appears.
important:
7
Do not use a HDMI cable longer than 5 m
for HDMI ARC connection.
Select the line »ARC« with
v« or »Λ«.
10 Select the setting »On« with » « or » «.
<
>
Apply-the-device--with-HDmi-ArC-
function-and-activate-HDmi-ArC
notes:
7
The internal speakers of the television are
switching off automaticaly.
1
Switch on the the multi-channel amplifier
or the AV receiver. If a Blu-ray Player is
connected on the AV receiver, the player
must be switched on, too.
7
7
For switching off the HDMI ARC function
select »Off« with » « or » «.
<
>
The ARC function will be deactivated while
switching off the television and the internal
speakers are active again.
2
3
Open the Tools menu with »tools«
button.
11 Press »menu« to end the setting.
Select the menu item »CEC« with »
« and confirm with »oK«.
– The »HDMI CEC Device List« appears.
v« or
»
Λ
4
Start device search with » « (red) button.
– Audio device connected to the »HDmi2-
(ArC)« source shall be displayed in the
list.
“Dolby” and the double-D logo are trademarks of
Dolby Laboratories.
Manufactured under licence from Dolby Laboratories.
-65
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
operAtion-usinG-externAl-DeviCes------------------------------
playing-the-audio-signal-via-the--
HiFi-system
1- Connect the »AuDio-out-l-r« sockets on
the television to the corresponding socket of
the AV receiver with an RCA cable (digital
audio signal).
note:
7
If this function is not activated, the audio sig-
nal is transmitted to the HiFi system/AV re-
ceiver (connected to »AuDio-out-l-r«).
1
2
Open the menu with »menu«.
Select the menu item »SOUND SETTINGS«
with »v« or »Λ« and press »oK« to confirm.
– The »SOUND SETTINGS« menu appears.
3
4
5
Select »Audio Output Setup« with » « or
v
»
Λ« and press »oK« to confirm.
– The menu appears.
Select the line »Audio Out« with »v« or »Λ«
and press » « or » « to activate the audio
<
>
output (»Line Out«).
Select the line » Audio Out Status« with »
or » « and select the option »Fixed« or »Ad-
justable« with » « or » «.
v«
Λ
<
>
notes:
7
If you select »Adjustable«, the volume can
be changed in the menu option » Audio Out
Volume«.
7
If the audio should only be output via the
HiFi system/AV receiver, select the option
»Off« in the line »TV Speaker with » « or
<
» «.
>
6
Press »menu« to end the setting.
-66
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
operAtion-As-A-pC-monitor-----------------------------------------------------------
Connecting-a-pC
20.09.2010
15:46
SOURCE SETUP
1
Connect the »pC-in« socket on the television
to the corresponding socket on the PC using
a VGA cable (video signal).
Source
PC
2
Connect the »Audio« socket on the televi-
sion to the corresponding socket on the PC
using a suitable cable (audio signal).
Auto Ajust
Extended settings
Auto Ajust Mode
On
50H - 50V
0
note:
7
Position
Size
Adjust your PC to the monitor (for example,
picture resolution 1280 x 768, picture fre-
quency 60 Hz).
Phase
30
selecting-presets-for-the-pC
Exit
Back
1
Press »
« and use »v«, »Λ«, » « or » «
<
>
to select the preset »PC« and press »oK« to
confirm.
Options:
settings-for-pC-mode
–
»Auto Ajust« for automatic PC configura-
tion.
1
Open the menu with »menu«.
– »Auto Ajust Mode«, select the option
»On« if the configuration should be imple-
mented automatically in PC mode.
– »Position« to configure the horizontal and
vertical picture position.
– »Size« to set the cycle frequency.
– »Phase« to eliminate flicker, unfocused
pictures or horizontal interference.
2
Select the »SOURCE SETUP« menu item with
»
v« or »Λ« and press »oK« to confirm.
– The »SOURCE SETUP« menu appears.
3- Select the function or setting with » « or
«, and then use » «, » « or » «, » « to
implement it.
v
»
Λ
v
Λ
<
>
4
Press »menu« to end the setting.
-67
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
operAtion-witH-A-Common-interFACe-------------------
what-is-a-Common-interface?
Access-control-for-Ci-module-and-
smart-card
7
Common Interface (CI) is an interface for
DVB receivers.
Encrypted channels can only be viewed
1
Open the menu with »menu«.
7
2
Select the line »SOURCE SETUP« with »
or »Λ« and press »oK« to confirm.
v«
with a CA module suitable for the encryp-
tion system and in conjunction with the
corresponding smart card.
The television set is equipped with a Com-
mon Interface slot into which CI modules
from various providers can be inserted.
You can insert the provider’s smart card into
the CA module in order to enable the en-
crypted channels you wish to view.
– The »SOURCE SETUP« menu appears.
Select the line »CA-Module« with » « or
« and press »oK« to confirm.
7
3
v
»
Λ
notes:
7
7
This menu provides operating instructions
and – after you enter your PIN code – ac-
cess to the PAY-TV provider's channels.
inserting-the-CA-module
note:
7
7
The remaining settings are described in the
operating manuals for your CI module and
smart card.
7
Switch the device off before you insert a CA
module into the »Ci« slot.
The CA modul is not supported in certain
countries and regions; please consult your
authorised dealer.
1
2
Insert the corresponding smart card into the
CI module.
Insert the CI module with the smart card into
the »Ci« slot on the television.
4
Press »menu« to end the setting.
note:
7
In the »CA Module« sub-menu you can see
which CA module has been inserted in the
CI slot.
7
If you are inserting a CA module into the
CI slot of the television for the first time,
you will need to wait a moment until the
CA module is detected.
-68
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------
7
Select the line »Scan Mode« with »
«.
Select the scan mode with » « or » «
(for unencrypted channels, for encrypted
channels only, or both).
v« or
searching-for-digital-television-
channels-from-a-satellite-
automatically
»Λ
<
>
Satellite data changes frequently, new channels
are constantly being added. You should
therefore perform an automatic search from time
to time.
8
Select the line »Service Type« with »
«.
Use » « or » « to select whether you
v« or
»Λ
<
>
This searches all transponders for new channels.
want to search for television channels (TV)
only, radio stations only (Radio) or both
(Radio + TV).
1
2
Open the menu with »menu«.
Select the line »SOURCE SETUP« with »v«
or »Λ« and press »oK« to confirm.
9
Select the line »Network Search« with »
or » «.
Select the option »On« with » « or » «
– If the »Network Search« is set to »On«,
the data will be accessed via the new tran-
sponder of the network which has been
set.
v«
– The »SOURCE SETUP« menu appears.
Λ
<
>
20.09.2010
15:46
SOURCE SETUP
Source
Satellite
OK
Automatic Channel Search
Digital Manual Tuning
Antenna Settings
10 Start the scan with » « (red).
note:
7
If the previously stored channels should be
retained in the channel list and the new
channels found be added to it, then press
Program Table
Signal Information
»
« (green).
Automatic Service Update
Off
Not Inserted
If » « (red) is pressed, the saved channels
will be deleted from the current channel list.
– The »Results« menu appears, and the scan
for TV channels begins.
CA -Module
Positioner settings
Exit
Back
– Depending on the number of television
channels received, this can easily take a
few minutes.
– The search is complete as soon as the
»PROGRAM TABLE« appears.
3
Select the line »Source« with »v« or »Λ«
and press »oK« to confirm.
Select the input source »Satellite« with » «,
<
note:
» «, »v« or »Λ« and press »oK« to con-
>
7
You can abort the search by pressing
»menu«.
firm.
4
5
6
Select the line »Automatic Channel Search«
11 Press »menu« to end the setting.
with »v« or »Λ« and press »oK« to confirm.
– The menu appears.
Select the line »Select Satellites« with »v« or
»
Λ« and press »oK« to confirm.
– The »SELECT SATELLITE« menu appears.
Select a satellite with »v« or »Λ« and press
»oK« to confirm.
-69
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------
searching-for-digital-television--
channels-from-a-satellite-manu-
ally
If you know the parameters of a new television
channel, you can also search for it manually.
Current transponder data can be found in the
teletext, in satellite TV magazines or on the
Internet.
lnB-settings
notes:
7
The following description about the LNB
settings premise a substantial expertise
about the satellite systems. Ask your
specialist dealer.
7
Your TV supports SCR system (Satellite
Channel Router). If you are using SCR
satellite system, follow the steps described
1
2
Open the menu with »menu«.
in »LNB Type« section.
Select the line »SOURCE SETUP« with »
or »Λ« and press »oK« to confirm.
v«
1
2
Open the menu with »menu«.
– The »SOURCE SETUP« menu appears.
Select »Digital Manual Tuning « with » « or
« and press »oK« to confirm.
– The menu appears.
Select the line required for the parameters
with » « or » «.
Select the line »SOURCE SETUP« with »
or » « and press »oK« to confirm.
– The »SOURCE SETUP« menu appears.
v
«
Λ
3
4
v
»Λ
3
4
Select »Antenna Settings« with »v« or »Λ
«
and press »oK« to confirm.
– The »ANTENNA SETTINGS« menu ap-
pears.
v
Λ
– »Frequency (MHz)«: Enter the five-digit
frequency with »1-...-0« .
Select the line required for the parameters
with »v« or »Λ«.
– »Symbol Rate (kS/s)«: Enter the five-digit
symbol rate with »1-...-0« .
– »Satellite«: »Press oK«, select a satellite
with » «, » «, » « or » « and press
– »Polarization«: Use » « or » « to set the
v
Λ
<
>
<
>
polarisation to »Horizontal« or »Vertical«.
– »Network Search«: use » « or » « to se-
»oK« to confirm.
– »Transponder«: »Press oK«, select a tran-
sponder with » «, » «, » « or » « and
press »oK« to confirm. Use » « (red) to
<
>
lect the option »On« or »Off«.
– »Scan Mode«: Use » « or » « to select
v
Λ
<
>
<
>
whether you want to search for unencrypt-
ed (Unencrypted) channels only, encrypt-
ed (Encrypted) channels only, or for both
(Unencrypted + Encrypted).
add a transponder, use » « (green) to
delete it, or use » « (yellow) to change
transponder data.
– »LNB Power«: Set the LNB power supply
(depending on the type of LNB) to »Off«
»13/18 V« or »14/19 V« with » « or » «.
– »Service Type«: Use » « or » « to select
<
>
whether you want to search for television
channels only (TV), radio stations only
(Radio), or both (Radio + TV).
<
>
– »LNB Type«: Select the LNB type used
in the satellite system with » « or » «. If
you are using a satellite antenna with an
Single Cable Distribution multiswitch, select
the setting »Grundig SCR«. After it, please
perform the »User Band«, »KB Frequency«
and »LNB Selection« settings in the
<
>
5
6
Start the scan with » « (red).
– The »Results« menu appears, and the scan
for TV channels begins.
note:
7
You can abort the search by pressing
»menu«.
submenus. The necessary parameters you
will get from the operator of the satellite
antenna. Use only this specification!
»User Band«: Select the user band
Press »menu« to end the setting.
number assigned to the user with » «
<
or » «.
>
-70
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------
»KB Frequency (MHz)«: Enter the user
settings-for-motorised-antennas-
band frequency assigned to the user
(DiseqC-1.2)
band with »1...0« buttons.
Your television set supports motorised satellite
»LNB Selection«: If more than one
satellites are used in the current SCR
system, select »1/2« to»2/2« for the
satellite corresponding to the relevant
positions using » « or » « buttons.
systems in compliance with DiSEqC 1.2. This
function allows the satellite antenna to be oper-
ated via the television set.
1
2
Open the menu with »menu«.
<
>
Select the line »SOURCE SETUP« with »
v«
notes:
or »Λ« and press »oK« to confirm.
7
Use installation equipment supported /
suggested by your Multiswitch.
– The »SOURCE SETUP« menu appears.
3
Select the line »DiSEqC 1.2« with »
v
«
7
7
7
Other users / receivers connected to the
system may be affected if the specified user
band number and frequency is changed
during installation.
or »
Λ«. Select the option »On« with » «
<
or » «
>
– The line »User Mode« is active.
note:
User band and User band frequency is
specified on the Multiswitch used; and
each user / receiver uses a specified user
band and user band frequency.
7
Additional operations are explained in the
following sections.
With SCR satellite system, auto search by
several users / receivers at the same time
may cause problems.
– »22 KHz«: Depending on the LNB type,
22 kHz audio is selected. For a univer-
sal LNB, this option is set to »Auto« and
cannot be changed.
– »DISEqC mode« and »LNB selection«:
depending on the type of antenna used,
use » « or » « select the option »Off«,
<
>
»DiSEqC 1.0« or »DiSEqC 1.1«.
»Off«: for a satellite system with only
one antenna.
»DiSEqC 1.0«: allows up to four satel-
lites to be received simultaneously.
Under »LNB selection«, use » « or
<
» « to select the option »1/4«, »2/4«,
>
»3/4« or »4/4«.
»DiSEqC 1.1«: allows up to 16 satel-
lites to be received simultaneously.
Under »LNB selection«, use » « or
<
» « to select the option »1/16« to
>
»16/16«.
5
Press »menu« to end the setting.
-71
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------
user-mode
expert-mode
You can adjust the alignment of the satellite an-
tenna to each individual satellite. These settings
will be saved so that the antenna can later be
easily guided to each saved alignment.
You can restrict the antenna's range or reset
the antenna.
1
Select the line »Installer Mode« with »
« and press »oK« to confirm.
– The »INSTALLER MODE« menu appears.
v« or
»Λ
1
Select the line »User mode« with »
v«
or » « and press »oK« to confirm.
Λ
2
Select the preferred option with
or » «.
»v«
– The »USER MODE« menu appears.
Λ
2
Select the preferred option with
»
v
«
– »Limit Position«: Defines the range in
or »
– »Satellite«: »Press oK«, select a satellite
with » «, » «, » « or » « and press
Λ«.
which the antenna may move. Use » «
<
to set the western limit, use » « to set the
>
v
Λ
eastern limit.
<
>
»oK« to confirm.
– »Move Motor«: Aligns the antenna with
– »Transponder«: »Press oK«, select the
transponder from which the signal is being
the selected satellite. Use » « to align the
<
antenna to »west«, use » « to align the
>
received with » «, » «, »
v« or »
Λ« and
antenna to »east«.
<
>
press »oK« to confirm.
– »Go To Stored Position«: Press »oK« to
save the current antenna alignment.
– »Store Stored Position«: Aligns the antenna
with the reference point of the positioner.
– »Reset DiSEqC 1.2 Limit«: Resets the limit
position of the antenna.
– »Moving Mode«: Use » « or » « to select
<
>
the option »Discrete« or »Continuous«.
– »Discrete«: Moves the antenna in
defined steps to the west and the east.
– »Continuous«: Moves the antenna to the
west or east continuously.
– »Step Size«: Use » « or » « to select the
<
>
number of steps with which the antenna
should turn. »Step Size« is only active
when the »Transport Mode« was set to
»Discrete«.
– »Move Motor«: Aligns the antenna with
the selected satellite. Use » « to align it to
<
»West«, use » « to align it to »East«.
>
– »Go To Stored Position«: Aligns the antenna
to a saved satellite position. Up to 50 posi-
tions can be saved. »Press oK« and then
select the saved position with » « or » «.
Press » « (green) to confirm – the anten-
na will be aligned with the saved position.
<
>
– »Store Stored Position«: The current anten-
na alignment is saved.
3
Press »menu« to end the setting.
-72
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------
note:
searching-for-television-chan-
7
You can accelerate the search. To do this,
you need information about the frequency
and network ID. You are usually able to get
this data from your cable operator or find it
in forums on the Internet. For example, the
frequency 402MHz and network ID 61441
can be entered for Germany.
nels-from-the-cable-provider-
automatically
1
2
Open the menu with »menu«.
Select the line »SOURCE SETUP« with »
or »Λ« and press »oK« to confirm.
v
«
«
– The »SOURCE SETUP« menu appears.
Select the line »Source« with
or » « and press »oK« to confirm.
Select the option »Cable« with » «, » «,
7
Start the scan with » « (red).
– All channel and favourites lists will be
deleted and compiled anew.
3
4
»
v
Λ
<
>
»v
« or »
Select the line »Automatic Channel Search«
with » « or » « and press »oK« to confirm.
– The menu appears.
Λ« and press »oK« to confirm.
note:
7
After starting the scan, a security query will
appear. Press » « (green) to confirm the
v
Λ
option »Yes«.
– The »Results« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
20.09.2010
15:46
SOURCE SETUP
AUTOMATIC CHANNEL SEARCH
– The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
Connection Type
Cabel
U.K.
Country
note:
ATV & DTV
Quick
Scan Type
7
You can abort the search by pressing
»menu«.
Cable Scan Type
Frequency (MHz)
Network ID
Auto
8
Press »menu« to end the setting.
Auto
Exit
Back
Start Search
5
6
Select the line »Scan Typ« with »
v
« or »
Λ
«
and set the option »DTV« with » « or » «.
<
>
Select the line »Cable Scan Type« with »
or »
with » « or » «.
v«
Λ« and set the option »Quick« or »Full«
<
>
– The search function »Quick« sets the channels
according to the information provided by your
cable provide in the transmission signal.
– If the option »Full« is selected, the entire fre-
quency range will be scanned. The search can
take a long time with this option. This option is
recommended if your cable provider does not
support the search type »Quick«
.
-73
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------
searching-for-television-channels- searching-for-digital-terrestrial-
from-the-cable-provider-manu-
ally
tv-channels-automatically
1
Open the menu with »menu«.
1
Open the menu with »menu«.
2
Select the line »SOURCE SETUP« with »
v
«
«
or »Λ« and press »oK« to confirm.
2
Select the line »SOURCE SETUP« with »
v
«
«
– The »SOURCE SETUP« menu appears.
Select the line »Source« with
or » « and press »oK« to confirm.
Select the option »Air« with » «, » «, »
or »Λ« and press »oK« to confirm.
– The »SOURCE SETUP« menu appears.
3
»
v
Λ
3
Select the line »Source« with »v« or »
Λ
v« or
and press »oK« to confirm.
<
>
»
Λ« and press »oK« to confirm.
Select the option »Cable« with » «, » «,
<
>
»v« or »Λ« and press »oK« to confirm.
Caution:
4
5
Select » Digital Manual Tuning« with »
v
« or
7
The antenna power supply (line »Active
Antenna Power«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
supplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably dam-
age your antenna.
»
Λ
« and press »oK« to confirm.
– The menu appears.
Enter the four-digit frequency with »1-...-0«
and press »oK« to confirm.
–
The search starts after confirming, the
channels found are displayed in the »Re-
sults« menu.
4
5
Select the »Active Antenna Power« with »
or » «. Switch on the antenna power supply
for the antenna with » « or » « (»On«).
v«
6
Press »menu« to finish the setting.
Λ
<
>
Select the line »Automatic Channel Search«
with » « or » « and press »oK« to confirm.
– The menu appears.
v
Λ
20.09.2010
15:46
SOURCE SETUP
AUTOMATIC CHANNEL SEARCH
Connection Type
Air
U.K.
Country
DTV & ATV
Scan Type
Exit
Back
Start Search
-74
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------
6
Select the line »Scan Typ« with »
v« or »Λ«
searching-for-digital-terrestrial-
tv-channels-manually
and set the option »DTV« with » « or » «.
<
>
7
Start the scan with » « (red).
1
Open the menu with »menu«.
– All channel and favourites lists will be
deleted and compiled anew.
2
Select the line »SOURCE SETUP« with »
v
«
«
or »Λ« and press »oK« to confirm.
note:
– The »SOURCE SETUP« menu appears.
7
After starting the scan, a security query will
3
Select the line »Source« with »v« or »
Λ
appear. Press » « (green) to confirm the
and press »oK« to confirm.
option »Yes«.
Select the option »Air« with » «, » «, »v« or
<
>
– The »Reults« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– The scan is complete as soon as the
»PROGRAM TABLE« appears.
»Λ
« and press »oK« to confirm.
Caution:
7
The antenna power supply (line »Active
Antenna Power«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
supplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably dam-
age your antenna.
note:
7
You can abort the search by pressing
»menu«.
8
Press »menu« to end the setting.
4
Select the »Active Antenna Power«« with
Automatic-service-update-
If this function is activated, possible changes of
network operators are updated automatically.
»
v« or »Λ«. Switch on the antenna pow-
er supply for the antenna with » « or » «
<
>
(»On«).
Select » Digital Manual Tuning« with »
« and press »oK« to confirm.
– The menu appears.
Enter the channel number directly with
1-...-0« and press »oK« to confirm.
The unit must be located in stand-by mode.
5
6
v« or
»Λ
1
2
Open the menu with »menu«.
Select the line »SOURCE SETUP with »v«
or »Λ« and press »oK« to confirm.
«
»
3
4
5
Select the line »Automatic Service Update«
with » « or » «.
–After the search is complete, the channels
found are displayed in the »Results« menu.
v
Λ
Select the automatic update with » « or » «
(»On«).
<
>
7
Press »menu« to finish the setting.
Press »menu« to end setting.
-75
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------
4
Select the line »Automatic Channel Search«
with »
firm.
tuning-analogue-television-
-channels
This setting is only necessary if you cannot re-
ceive any digital channels and you have not car-
ried out an analogue search during initial setup.
The television channels can be set directly or
using the scan.
v« or »
Λ
« and press »oK« to con-
20.09.2010
15:46
SOURECE SETUP
Source
Air
OK
Automativ Channel Search
Digital Manual Tuning
Analogue Manual Tuning
Program Table
switching-the-television-to-
-analogue-reception
note:
7
Analogue channels can be selected if the
option »Air« or »Cable« has been selected.
Signal Information
1
2
Open the »Select input source« menu with
«.
Automatic Service Update
On
»
CA - Modul
Not inserted
Off
Depending on the antenna system, select the
Active Antenna Power
option »Air« or »Cable« with »v«, »Λ«, » «
<
or » « as the input source and press »oK«
Exit
>
Back
to confirm.
note:
7
Additional operations are explained in the
following sections.
5
6
Select the line »Scan Typ« with »
v« or »Λ«
and set the option »ATV« with » « or » «.
<
>
Start the scan with » « (red).
setting-all-analogue-television-
channels
Analogue channels are displayed in the channel
list after the digital channels.
note:
7
After starting the scan, a security query will
appear. Press » « (green) to confirm the
option »Yes«.
note:
– All channel and favourites lists for the ana-
logue channels will be deleted and com-
piled anew.
– The »Results« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– The search is complete as soon as the »PRO-
GRAM TABLE« appears.
7
Plug the rooftop antenna cable (for analogue
television channels) into the »Ant-in«
socket on the television.
1
2
Open the menu with »menu«.
Select the line »SOURCE SETUP« with »
v
«
«
or »Λ« and press »oK« to confirm.
– The »SOURCE SETUP« menu appears.
3
Select the line »Source« with »v« or »
Λ
note:
and press »oK« to confirm.
7
You can abort the search by pressing
»menu«.
Select the option »Air« or »Cable« with » «,
<
» «, »
firm.
v« or »
Λ
« and press »oK« to con-
>
7
Press »menu« to end the setting.
-76
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------
note:
tuning-the-television-channels-by-
entering-the-channel-numbers
7
If you wish to remedy other television
channels, repeat steps 4 to 7.
1
Open the menu with »menu«.
8- Press »menu« to end the setting.
2
Select the line »SOURCE SETUP« with »
v«
or »Λ« and press »oK« to confirm.
Changing-stored-analogue-
-channels
If channels were stored with the automatic chan-
nel search while tuning the television channels,
you can delete them. You can also store chan-
nels in a different preset, change or enter the
name of a channel as well as skip channels.
– The »SOURCE SETUP« menu appears.
3
Select the line » Analogue Manual Tuning«
with »v« or »Λ« and press »oK« to confirm.
– The menu appears.
INSTALLATION
ANALOGUE MANUAL TUNING
selecting-a-channel-list
Program No
TSystem
Band
1
BG
C
1
Open the menu with »menu«.
2
Select the line »SOURCE SETUP« with »
v«
or »Λ« and press »oK« to confirm.
Channel
2
– The »SOURCE SETUP« menu appears.
Fine Tuning
0
3
Select the line »Program Table« with » « or
v
48.25 MHz
»
Λ« and press »oK« to confirm.
– The »PROGRAME TABLE« menu appears.
note:
Auto Previous
Auto Next
Store
7
Additional operations are explained in the
following sections.
4
5
Select the line »Program No« by pressing »
v«
or » « and use » « or » « to save the preset.
Λ
Deleting-channels
<
>
Select »Band« by pressing »
v
« or »
(special channel) or »C« (normal channel).
Select the line »Channel« with » « or » « and
Λ« and
1
In the »PROGRAME TABLE« menu, select the
television channel to be deleted with «,
«, » « or » « and press » « (red) to con-
use »» « or » « to choose between »S«
<
>
»v
»
Λ
<
>
6
v
<
Λ
firm.
Delete the selected channel by pressing
« (yellow).
enter the channel number with » « or » « step
>
2
by step, or use »1…0« to enter the channel
»
number directly, or
start a automatic scan with
(green) oder
»
«
note:
(yellow)
.
»
«
7
»
« (blue) allows all television channels
notes:
to be deleted.
7
The current system is displayed in the
»System« line. If the colour or sound is
not functioning properly, select the line
3
Press » « (green) to confirm the deletion
process.
»System« with »
v« or »Λ«. Use » « or » «
<
>
to select the preferred setting.
7
If fine tuning is necessary, select the line
»Fine Tuning« with » « or » « and use » «
or » « to make the setting.
v
Λ
<
>
7
Press » « (blue) to save the setting.
-77
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------
entering-channel-names-(8-digit-
maximum)
Creating-lists-of-favourites
You can select your favourite channels and save
them in up to four favourites lists (Fav 1 to Fav 4).
1
In the »PROGRAME TABLE« menu, select the
television channel with » «, » «, » « or
» « and press » « (red) to confirm.
v
Λ
<
1
2
3
In the »PROGRAME TABLE« menu, switch
>
over to the list view with » « (yellow).
2
Open the input keyboard with » « (green).
Select the preferred channel with »
or »Λ«.
v«
note:
7
If necessary, delete the current channel
Use » « or » « to ”push“ the channel into
<
>
name. To do this, select the »
« button
one of the favourites lists 1 to 4 and press
»oK« to confirm.
with » « or » « and delete repeatedly using
<
>
»oK«
Select the required letters or numbers with
«, » «, » « or » « and confirm with
»oK«
.
– The position in the favourites list is marked
with »✔«.
– You can enter the same channel in more
than one favourite list.
– Each favourite list can store up to
255 channels.
3
4
»
v
Λ
<
>
.
Repeat the entry for further letters/numbers.
note:
note:
7
Use the »ABC« button to switch to upper
7
Channels can also be deleted from favour-
case letters and use the »?@123« button to
switch to symbols and numbers.
ites lists. Select the channel to be deleted
with »
v«, »Λ«, » « or » « and delete it with
<
>
»oK«
.
Save the channel name by using »v«, »Λ«,
» « or » « to select »Submit« and confirm
<
>
exiting-the-settings
with »oK«
.
1
Press »menu« to end the setting.
note:
7
If you wish to enter other channel names,
repeat steps 1 to 4.
skipping-television-channels
You can highlight television channels to be
skipped when you select with »Λ« or »v«.
Selection is still possible using the number
buttons.
1
2
3
In the »PROGRAMETABLE« menu, switch over
to the list view with » « (yellow).
Select the preferred channel with »
v«
or »Λ«.
Select the column »Skip« with » « or » «
<
>
and use »oK« to mark the channel.
– The channel is marked using »✔«.
note:
7
Channels can also be reactivated. Select the
channel with » « or » «, then select the
column »Skip« and reactivate the channel
v
Λ
with »oK«
.
-78
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
inFormAtion----------------------------------------------------------------------------------------------------------------------
Displaying-signal-information
(for digital channels only)
1
2
Open the menu with »menu«.
Select the line »SOURCE SETUP« with »
or »Λ« and press »oK« to confirm.
v«
3
Select the line »Signal Information« with
« or » « and press »oK« to confirm.
»v
Λ
– Information on the channel, network,
modulation, symbol rate, quality and
signal strength is displayed.
notes:
7
The signal information changes in accord-
ance with the current input source.
7
The signal properties are displayed in the
lower section of the menu. The further the
bars for »Quality« and »Signal Strenght«
extend to the right, the better the reception
signal.
7
The signal level not only depends on your
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna based upon
the signal level display.
4
Press »menu« to close the menu.
-79
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
inFormAtion----------------------------------------------------------------------------------------------------------------------
terrestrial-(DvB-t):
VHF/UHF band, Bandwidth 7 MHz
and 8 MHz
GrunDiG-46-vle-8270-Bl
technical-data
FFT Size:
2k, 8k
operating-voltage:-
Modulation:
16QAM, 64QAM, QPSK
220–240 V, , 50–60 Hz
~
Guard Interval: 1/4, 1/8, 1/16, 1/32
power-consumption:
On mode 82 W
Standby <0.50 W
terrestrial-(DvB-t2):
VHF/UHF band, Bandwidth 7 MHz
and 8 MHz
energy-efficiency-class:
A
FFT Size:
Modulation:
1k, 2k, 4k, 8k, 16k, 32k
16QAM, 64QAM,
256QAM, QPSK
maximum-power-consumption
On mode 180 W
Guard Interval: 1/4, 19/256, 1/8, 19/128,
1/16, 1/32, 1/128
Annual-power-consumption
120 kWh
As this feature is optional, it is not available in
all products.
Audio-output:-
2 x 20 W music power output
2 x 10 W Sine wave power
Analogue-reception-ranges:
C02 ... C80, special channels S01 ... S41
preset-channels:-
rohs-limits: Pb (Lead)/Hg (Mercury)
All Channels 6000 (Satellite – DVB-S),
1000 (Cable – DVB-C) or
99 (Analogue)
Pb meets ROHS directive / 0 mg
peak-luminance-ratio:
65 %
1000 (Terrestrial – DVB-T) or
99 (Analogue)
9 AV, 2 USB
Default-satellite:
20
screen-(dm²):
58 dm²
screen-size:
117 cm/46 inch
lnB-power-supply:
13/18 V, 14/19 V optional, maximum 500 mA
lnB-switching-signal:
0/22 kHz 650mV +/- 250mVpp
maximum-resolution:
WUXGA, 1920 x 1080
DiseqC:
1.0-operation, 1.1-operation, 1.2-operation
weight:
approx. 20 kg
Digital-reception-ranges
satellite:
Dimensions:
W H D 108,3 cm x 66,6 cm x 4,3 cm
Ku band:
10,700 MHz – 12,750 MHz
Modulation: DVBS QPSK, DVBS2 QPSK,
8 PSK
IF band:
950 MHz – 2,150 MHz
Signal level: -25dBm to -65 dBm
Cable:
Overall band: 110 MHz – 862 MHz
Modulation:
16QAM, 32QAM, 64QAM,
128QAM and 256QAM
Symbol rate: 4.0 Msym/s to 7.4 Msym/s
Technical changes and errors reserved.
-80
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
inFormAtion----------------------------------------------------------------------------------------------------------------------
For-customers-in-russian
1.-srD-with-FHss-modulation
service-information-for-dealers
Only operate the
television with the
power supply/power
cord provided.
7
Maximum 2.5 mW e.i.r.p.
7
Maximum 100 mW e.i.r.p. Permitted for use
SRD for outdoor applications without restric-
tion on installation height only for purposes of
gathering telemetry information for automated
monitoring and resources accounting systems.
Permitted to use SRD for other purposes for
outdoor applications only when the installa-
tion height is not exceeding 10 m above the
ground surface.
The product complies with the following EU di-
rectives:
Power consumption values and classes are speci-
fied according to the regulations 2009/642 and
2010/1062 and the standards EN62087 and
EN62301 as per European Union framework di-
rectives 2009/125/EC and 2010/30/EU.
7
Maximum 100 mW e.i.r.p. Indoor applica-
tions.
With this note, Grundig declares that this appli-
ance is in conformity with the main and other rel-
evant terms of the 1999/5/EC directive.
2.-srD-with-Dsss-and-other-than-FHss-
wideband-modulation-
To obtain a copy of the Declaration of Confor-
mity (Doc), please submit your request by using
download/doc
7
Maximum mean e.i.r.p. density is 2 mW/
MHz. Maximum 100 mW e.i.r.p.
7
Maximum mean e.i.r.p. density is 20 mW/
MHz. Maximum 100 mW e.i.r.p. Permitted to
use SRD for outdoor applications only for pur-
poses of gathering telemetry information for
automated monitoring and resources account-
ing systems or security systems.
Maximum mean e.i.r.p. density is 10 mW/
MHz. Maximum 100 mW e.i.r.p. Indoor ap-
plications.
This appliance can be operated in the following
European countries.
AT BE BG CH CY CZ DE DK
EE ES FI
IS IT LI
FR GB GR HU IE
LT LU LV MT NL
7
NO PL PT RO SE SI SK TR
For-customers-in-ukraine
e.i.r.p. ≤100 mW with built-in antenna with am-
plification factor up to 6 dBi.
This appliance can also be operated in countries
outside Europe.
Please observance the restrictions for the follow-
ing countries:
environmental-note
This product has been made
from high-quality parts and
For-customers-in-France
Outdoor use limited to 10 mW e.i.r.p. within the
band 2454-2483.5 MHz. Military Radioloca-
tion use. Refarming of the 2.4 GHz has been
ongoing in recent years to allow current relaxed
regulation. Full implementation planned 2012.
materials which can be re-used
and recycled.
Therefore, do not dispose of the product along
with normal household waste at the end of its
service life. Take it to a collection point for the
recycling of electrical and electronic equipment.
Dispose of the used device at a collection point
for electrical and electronic equipment. The sym-
bol on the product, in the operating manual or on
the packaging indicates that recycling is possible.
Information on collection points is available from
your local authorities.
For-customers-in-italy
For private use, a general authorisation is re-
quired if WAS/RLAN’s are used outside own
premises. For public use, a general authorisation
is required.
For-customers-in-norway
This subsection does not apply for the geograph-
ical area within a radius of 20 km from the cen-
tre of Ny-Ålesund.
Help protect the environment by recycling used
products.
-81
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
inFormAtion----------------------------------------------------------------------------------------------------------------------
troubleshooting
If the information provided below does not help, please consult an authorised GRUNDIG dealer.
Please bear in mind that malfunctions can also be caused by external devices such as video recorders
or satellite receivers.
problem
possible-cause
remedy
Screen lit (snow), but no station
visible
Antenna cable
Is the antenna cable connected?
No TV channel tuned
Start a channel scan
Insufficient contrast in picture
The picture settings are not correct
Adjust the brightness, contrast or colour
setting
Problem at station
Try another channel
Picture and/or sound distorted
Ghosting, reflection
Interference from other devices
Place the device in a different position
Channel setting
Antenna
Automatic or manual tuning/fine tuning
Have antenna cable or system checked
Turn up the colour
No colour
Colour intensity too low
Adjust TV standard (if setting option is
available)
Select the correct colour standard
Problem at station
Try a different channel
Picture but no sound
Volume is set to a minimum
Turn up or switch on the volume
Teletext impaired or absent
Problem at station
Try a different channel
Television channel (no teletext)
or antenna system
Try with a different TV channel,
carry out fine tuning
Station signal too weak
Check antenna
The remote control does
not work
Obstacle between remote control and
device.
Point remote control at television
Battery problem
Check batteries and replace if
necessary
Operating mode undefined
Switch off the television at the mains
switch for two minutes
Picture too dark in PC mode
Incorrect setting for picture resolution
and picture frequency on the PC
Change settings on the PC
(e.g. 1280 x 768 resolution,
refresh rate 60 Hz)
DMS device cannot be found DMS device is not switched on or
not started
Make sure that the DMS device is on
and operating.
Network connection settings are not
made.
Check the network settings.
-82
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
inFormAtion----------------------------------------------------------------------------------------------------------------------
problem
possible-cause
remedy
Low image quality (pixel) in
WLAN mode
Signal is lost based on structural
conditions.
Place the modem so that the signal to
the television is not interrupted.
Internet connection speed low.
Low Internet speed is a problem that
is related with the speed of your sub-
scription or a failure in the Internet in-
frastructure. Contact with your service
provided (ISP).
DMS (for example PC) is connected
to the wireless network and away
from the modem
Bring your DMS closer to the modem
Warnings about the connec-
tion problems on the display
Network Cable or wireless USB net-
work device may be disconnected
Check network cable or wireless USB
network device
Modem does not have Internet con-
nection or has problems
Make sure that your modem has In-
ternet connection
Videos in video aplications
are lagging during playback
in wired connection
Internet connection speed low
Low Internet speed is a problem that
is related with the speed of your sub-
scription or a failure in the Internet in-
frastructure. Contact with your service
provided (ISP).
There are connection prob-
lems in inter@ctive applica-
tions
This may occur due to temporary
problems in servers of these applica- again
tions
Try connecting to the applications
note:
7
This is a Class A product. During operation the device can cause radio interference. In this case
the user may have to remedy this. Please contact your specialist dealer.
-83
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
|