Golden Technologies Mobility Scooter GB106 User Manual

Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
GB-106 and GB-106XR Buzzaround Lite™  
401 Bridge Street, Old Forge, PA 18518  
Tel: 800-624-6374 Fax: 570-451-7494  
Y O U R L I F E I N M O T I O N  
Page 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
CONTENTS  
________________________________________  
Introduction……………………………………………………….  
Safety……………………………………………………………..  
EMI/RFI……………………………………………………………  
4 - 5  
6 - 8  
9
Your Golden Technologies Buzzaround Lite……………….  
10 - 11  
12 - 16  
Operation………………………………………………………….  
Riding Your Buzzaround Lite…………………………………  
Diagnostics ………………………………………………………  
General Care and Maintenance ……………………………….  
Care and Maintenance of your Buzzaround Lite…………...  
Disassembly of your Buzzaround Lite……………………….  
Assembly of your Buzzaround Lite…………………………..  
Transporting your Buzzaround Lite………………………….  
Buzzaround LiteSpecifications………………………………  
Warranty …………………………………………………………  
Warranty Card ……………………………………………………  
17 - 20  
21  
22 - 26  
27  
28 - 30  
31 - 34  
35  
36  
37  
39  
Page 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
INTRODUCTION  
Congratulations on the purchase of your new Golden Technologies Buzzaround  
Litescooter! The Buzzaround Lite combines cutting edge technology with  
attractive designs that are also highly functional in today’s world. We at Golden  
Technologies know that you have chosen a scooter that will give you years of  
dependable operation and will also enhance the quality of your life by providing  
you with the mobility to experience a more active daily lifestyle.  
Please read, understand and follow all of the instructions and suggestions in this  
manual before you operate your Buzzaround Lite for the first time. The safe use  
of your new scooter is very important and starts with you. Your new Buzzaround  
Lite is user-friendly and designed for maximum maneuverability in even the  
tightest spaces.  
If you feel uncomfortable with your new scooter or do not understand the  
instructions presented in this owner’s manual, or if, for any reason, you do not  
feel capable of performing the activities necessary to assemble, disassemble,  
operate, or maintain your Buzzaround Lite, please contact the home health care  
dealer you purchased this scooter from or contact Golden Technologies technical  
support services at 800-624-6374.  
Golden Technologies, Inc. cannot be held responsible for personal injury or  
property damage resulting from the unsafe or the improper use of any of our  
broad range of health and personal mobility products.  
Please fill out and mail the enclosed warranty registration card. We at Golden  
Technologies, Inc. would appreciate hearing about your experience with your  
new Buzzaround Lite scooter!  
Please mail your warranty card to:  
Golden Technologies, Inc.  
Warranty Registration Office  
401 Bridge Street  
Old Forge, PA 18518  
Phone: 570-451-7477  
Fax: 570-451-7494  
Stop by our website 24 hours a day!!!  
Page 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
INTRODUCTION  
Your Golden Technologies Buzzaround Liteis a battery-operated personal  
mobility vehicle. Please exercise caution and consideration when you are  
operating it. Driving your Buzzaround Lite carefully and thoughtfully will help  
ensure your personal safety and the safety of other people.  
Note: Before learning to operate your Buzzaround Lite, have your Golden  
Technologies, Inc. representative determine if it is advisable for you to practice  
getting on and off your Buzzaround Lite and operating it in the presence of an  
attendant.  
BEFORE GETTING ON YOUR BUZZAROUND LITE  
READ COMPLETELY AND UNDERSTAND THIS OWNER’S MANUAL BEFORE  
ASSEMBLING, OPERATING, TRANSPORTING, OR DISASSEMBLING YOUR  
GOLDEN TECHNOLOGIES BUZZAROUND LITE.  
Check to be certain that the key is removed. See operation section in this  
manual. This will eliminate the possibility of accidentally activating the thumb  
lever controls and causing injury to you or to others.  
Check to be certain that your scooter brake handle is in the engaged position.  
See the “disassembly” section in this manual.  
Flip up the armrests.  
WARNING: WHEN GETTING ON OR OFF YOUR BUZZAROUND LITE, DO NOT PUT  
MOST OR ALL OF YOUR WEIGHT ON THE EDGE OF THE DECK. DOING SO MAY  
CAUSE THE SCOOTER TO TIP.  
GETTING ON YOUR BUZZAROUND LITE  
Make certain that the key is removed!  
Position the seat for safe and easy mounting. See: “Operation” section.  
Carefully place one foot on the approximate center of the deck and seat yourself  
comfortably and securely on the seat.  
Fasten the lap belt, if your scooter is so equipped.  
Flip down the armrests.  
GETTING OFF YOUR BUZZAROUND LITE  
Make certain that the power is turned off and key is removed!  
Flip up the armrest.  
Unfasten the lap belt, if your scooter is so equipped.  
Carefully place one foot on the ground, transfer your weight to that leg, and  
slowly come to a standing position.  
Step away from the scooter.  
MAXIMUM WEIGHT  
Your Buzzaround Lite has been rated to a maximum payload (includes operator and any  
other carry on baggage) of 250 pounds. Exceeding the maximum weight rating will void  
the warranty.  
WARNING: EXCEEDING THE MAXIMUM WEIGHT RATING MAY ALSO RESULT IN  
INJURY TO YOU AND TO OTHERS.  
Page 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
SAFETY  
DRIVING YOUR BUZZAROUND LITE™ ON AN INCLINE  
For maximum stability, lean forward on your seat while proceeding up  
ramps, slopes, curbs, or any low rise.  
Drive with caution when attempting to negotiate any incline, even  
handicap access ramps.  
Always climb or descend a gradient by driving straight up or straight down  
the face of the slope.  
Do not traverse or drive across the face of a gradient.  
Do not attempt to negotiate an incline that is covered with snow, ice, cut  
or wet grass, leaves, or any other potentially hazardous material.  
Do not back down an incline.  
Try to keep your Buzzaround Lite moving when climbing an incline. If you  
do come to a stop, restart and accelerate slowly and carefully.  
Do not try to descend or climb a slope whose gradient is greater than  
recommended. See “Specifications” section.  
Max incline  
GB106:  
6°  
Max incline  
GB106XR:  
7.5°  
WARNING: IF, WHILE YOU ARE DRIVING DOWN A SLOPE, YOUR SCOOTER STARTS TO  
MOVE FASTER THAN YOU FEEL IS SAFE, RELEASE THE THUMB LEVER AND ALLOW  
YOUR BUZZAROUND LITE TO COME TO A STOP. WHEN YOU FEEL THAT YOU AGAIN  
HAVE CONTROL OF YOUR SCOOTER, PUSH THE THUMB LEVER FORWARD AND  
CONTINUE SAFELY DOWN THE REMAINDER OF THE SLOPE.  
DRIVING DOWN AN INCLINE  
Always drive forward down any ramp, low rise, or incline.  
Never drive your scooter in reverse down any incline, ramp, curb, or low  
rise. Backing down any slope may create a very hazardous situation.  
Page 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
SAFETY  
RULES FOR USE AND OTHER SAFETY CONSIDERATIONS  
MEDICATION  
Always check with your physician to determine if any of the medications you are taking  
may affect your judgment and / or your ability to operate your Buzzaround Lite. Also  
check with your physician concerning your physical ability to operate a scooter.  
WARNING: DO NOT CONNECT OR ALLOW ANYONE EXCEPT AN AUTHORIZED GOLDEN  
TECHNOLOGIES REPRESENTATIVE TO CONNECT ANY ELECTRICAL OR MECHANICAL  
DEVICE TO YOUR BUZZAROUND LITE. UNAUTHORIZED ACCESSORIES WILL VOID THE  
WARRANTY AND MAY CAUSE INJURY.  
Note: Please remember that while on your Buzzaround Lite, you are a motorized  
pedestrian. You must observe and obey all pedestrian rules and regulations for the  
locale in which you are riding.  
Please use your Buzzaround Lite scooter often and allow it to expand the horizons of  
your daily life. But as with all things, especially motor operated vehicles, observing a few  
rules and safety considerations will help ensure safe scooter operation. So please follow  
the rules below.  
Do not turn your scooter while on an incline or decline.  
Always keep all your body parts within the confines of the scooter.  
Do not hose down your scooter.  
Always remain properly seated when operating your scooter.  
Do not place your scooter in freewheel mode when on an incline or decline.  
Never sit on your scooter when it is in freewheel mode.  
Always reduce the speed of your scooter when making turns.  
Do not operate or store your scooter where it will be exposed to rain, snow, mist,  
and below freezing temperatures.  
Do not operate your scooter on slippery, icy or salted surfaces.  
Never charge a frozen battery.  
Do not modify your scooter in any way that is not authorized by Golden  
Technologies.  
Page 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
SAFETY  
RULES FOR USE AND OTHER SAFETY CONSIDERATIONS FOR YOUR  
BUZZAROUND LITE™  
Read completely and understand this owner’s manual before assembling,  
operating, transporting, or disassembling your scooter.  
Always operate your Golden Technologies Buzzaround Lite with thought, care  
and safety.  
Do not attempt to use your scooter on an escalator. Always use an elevator.  
Do not carry passengers under any circumstances.  
Do not mount or dismount your scooter unless the brake is engaged.  
Make certain that the key is removed before mounting or dismounting your  
scooter.  
Do not back your scooter down an incline or across an uneven surface.  
Make certain that the seat is locked in the forward position before operating your  
scooter.  
Always come to a full stop before changing direction from forward to reverse or  
from reverse to forward.  
Do not operate your scooter where you could not safely or legally walk.  
Do not climb ramps or curbs that exceed your scooter’s capacity.  
Always approach curbs and inclines straight on.  
Be aware of and careful near mechanical pinch points (for example, when mating  
the rear carriage to the front frame, especially when assembling and  
disassembling your scooter. See Assembly/Disassembly section.  
Never sit on your Buzzaround Lite when it is being transported.  
Do not operate your vehicle if it is not functioning properly.  
Use caution when driving on soft or uneven surfaces such as grass and gravel.  
Also use caution on decks where there is no railing.  
Never drive on the roadway, except when you must cross the street.  
Never back up or down a step or curb.  
Never operate your Buzzaround Lite while you are under the influence of alcohol.  
WARNING: TURNING TOO SHARPLY AROUND A CORNER CAN CAUSE THE SCOOTER TO TIP.  
AVOID THIS DANGER AT ALL TIMES BY STEERING A WIDE ARC AROUND CORNERS AND  
OBSTACLES. ALSO, TO AVOID THE RISK OF TIPPING, REDUCE SPEED BEFORE NEGOTIATING  
ANY TURNS.  
FOR EMERGENCY STOPPING, REMOVE SCOOTER KEY – SCOOTER WILL STOP.  
NEVER OPERATE SCOOTER ON SNOW OR ICE.  
NEVER TRANSFER ONTO OR OFF OF THIS SCOOTER USING THE SEAT BACKREST FOR SUPPORT  
DURING TRANSFER. THE SEAT BACK MAY FOLD DOWN AND MAY CAUSE YOU TO LOSE YOUR  
BALANCE AND COULD RESULT IN PERSONAL INJURY. MAKE SURE THE SEAT SWIVEL IS  
LOCKED.  
DO NOT LEAN ON TILLER FOR SUPPORT DURING TRANSFERS. THE TILLER MIGHT  
UNINTENTIONALLY MOVE AND CAUSE YOU TO LOSE YOUR BALANCE WHICH COULD RESULT IN  
PERSONAL INJURY.  
Page 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
EMI / RFI  
The rapid development of electronics, especially in the area of communications,  
has saturated our environment with electromagnetic (radio) waves that are  
emitted by television transmitters, cellular phones, citizen’s band radios (CBs)  
amateur radios (HAM radios), wireless computers links, microwave transmitters,  
paging transmitters, etc. These electromagnetic (EM) waves are invisible and  
increase in strength the closer one gets to the source of transmission. When  
these energy waves act upon electrical devices and cause them to malfunction or  
to function in an erratic or uncontrolled manner, they are referred to as  
Electromagnetic Interference (EMI) or Radio Frequency Interference (RFI).  
EMI / RFI AND YOUR BUZZAROUND LITE™  
All electrically powered vehicles, including scooters are susceptible to EMI / RFI.  
This interference could result in abnormal or unintended movement of your  
Golden Technologies Buzzaround Lite.  
The FDA has determined that each make and model of scooter can resist EMI /  
RFI to a certain level. The higher the level of resistance, the greater the degree  
of protection from EMI / RFI – measured in volts per meter (V/M). The FDA has  
also determined that current technology is capable of providing 20 V/M of  
resistance to EMI/RFI, which would provide useful protection against common  
sources of interference. The resistance level of the Golden Technologies  
Buzzaround Lite is unknown.  
EMI / RFI RECOMMENDATIONS  
Do not turn on or use hand-held personal electronic communication  
devices such as cellular phones, walkie-talkies, or CB radios while your  
scooter is turned on.  
Be aware of any nearby transmitters (radio, television, microwave, etc.) on  
your intended route and avoid operation of your scooter close to any of  
those transmitters.  
Remove the key if your Buzzaround Lite is going to be in a stationary  
position for any length of time.  
Be aware that adding accessories or components or modifying your  
scooter may make it more susceptible to EMI / RFI.  
If unintended movement or brake release occurs, turn your scooter off and  
remove the key as soon as it is safe to do so.  
Report all incidents of unintended movement or brake failure to Golden  
Technologies.  
WARNING: TURN OFF YOUR SCOOTER AND REMOVE THE KEY AS SOON AS IT IS SAFE  
TO DO SO IF UNINTENDED OR UNCONTROLLABLE MOTION OCCURS OR IF  
UNINTENDED BRAKE RELEASE OCCURS.  
Page 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
Scooter Information  
BUZZAROUND  
LITE™  
Drive  
Control  
Lever  
Key  
Freewheel Brake  
Release  
Tiller  
Adjustment  
Knob  
Circuit Breaker  
Page 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
FOR YOUR RECORDS:  
Please fill in your Buzzaround Liteinformation below. This information will be  
useful in the event that you ever need to contact Golden Technologies  
concerning your scooter.  
Model ________  
Serial Number _____________________  
Body Color _____________  
Date of Purchase _________________  
Options______________________________________________________  
Your Golden Technologies representative or dealer  
Name________________________________________________________  
Company _____________________________________________________  
Address ______________________________________________________  
_____________________________________________________________  
Please remember to fill in and return your  
Warranty registration card.  
Page 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
GB-106 Buzzaround LiteOperation  
DC Battery Voltage Meter  
Key (On position)  
Horn Button  
Speed Adjustment Knob  
(Reverse) Drive Control Lever (Forward)  
Hand Controls  
Speed Adjustment Dial  
The speed adjustment dial allows you to pre-select the maximum top speed of  
your Golden Technologies Buzzaround Lite.  
Turn the dial completely counterclockwise to operate your scooter at the  
lowest speed.  
Turn the dial clockwise to operate your scooter at top speed.  
We recommend that you select a speed setting at which you feel comfortable,  
safe, and in control of your scooter.  
Key Switch  
This switch turns the power of your Buzzaround Lite on and off.  
Insert the key into the keyhole and push until fully inserted. Notice a green  
“LED” light illuminate. Once illuminated, your scooter is powered.  
Note: Always make certain that the key is removed from the key switch before  
getting on or off your scooter.  
Page 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
OPERATION  
When the power to your Buzzaround Liteis turned on, an LED (Light Emitting  
Diode) will illuminate. This LED is used in diagnosing operational problems that  
may arise. See “Diagnostics” section on page 21.  
Horn Button  
Press this button to sound the horn.  
Drive Control LEver  
This self-centering drive control lever system controls your Buzzaround Lite  
speed (up to the maximum speed set by the speed adjustment dial) as well as  
the forward and reverse direction. This control system is also called the “Wig-  
wag”.  
To drive forward:  
Place your hands on the handgrips.  
Use your thumbs to operate the drive control lever.  
User your right thumb to press lightly on the “F” (forward motion) lever to  
move your scooter forward.  
Increase the pressure applied by your thumb to increase your forward  
speed.  
To stop your Buzzaround Lite, release all pressure on the lever. The lever  
will automatically return to the center (neutral) position and your scooter  
will come to a gradual stop.  
Note: Always bring your Buzzaround Lite to a full stop before changing direction  
from forward to reverse, or from reverse to forward.  
To drive in reverse:  
Place your hands on the handgrips.  
Use your thumbs to operate the control levers.  
Use your left thumb to press lightly on the “R” (reverse motion) lever to  
move your scooter in reverse.  
Increase the pressure applied by your thumb to increase your reverse  
speed.  
To stop your scooter, release all pressure on the lever. The lever will  
automatically return to the center (neutral) position and your scooter will  
come to a gradual stop.  
Page 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
OPERATION  
DC Battery Voltage Meter  
This meter shows the amount of voltage in your Buzzaround Litebatteries.  
Green indicates a full battery charge  
Yellow indicates caution and approximately one-half charge on the  
batteries.  
Red indicates that the batteries have less than one-half of a charge  
remaining. See “Care and Maintenance” section for instruction concerning  
charging the batteries.  
Note: Your scooter will automatically turn itself off if the battery output falls to 18  
VDC or lower.  
Tiller Adjustment  
The tiller on your Buzzaround Lite scooter employs an adjustment knob to  
provide you with infinite tiller angle settings. To set the tiller to your liking, follow  
these directions:  
Use one hand to grasp a handgrip.  
Use your other hand to loosen the tiller adjustment knob.  
Position the tiller to a comfortable driving position.  
Tighten the tiller adjustment knob.  
Tiller  
Adjustment  
Knob  
Page 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
OPERATION  
Armrest Width Adjustment  
To adjust the armrest width:  
1. Loosen the adjustment knobs at the rear of the seat.  
2. Slide the armrests in or out to the desired width.  
3. Tighten the adjustment knobs.  
Max arm width: 24”  
WARNING: BE SURE ADJUSTMENT KNOBS ARE SECURELY TIGHTENED AGAINST THE  
INSERTED ARM REST TUBE. DO NOT EXCEED MAXIMUM ARM WIDTH.  
Seat Height Adjustment  
To adjust the seat height:  
1. Remove the seat by holding the Seat Rotation Lever up and lifting the seat  
straight up.  
2. Set the seat aside.  
3. Remove ball detent pin or the bolt, nut, and washers that hold the seat  
post in the seat pedestal.  
4. Position the seat post at the desired height while aligning the holes in the  
seat post and the seat pedestal.  
5. Reinstall the ball detent pin or nut, bolt, and washers and  
tighten securely.  
Page 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
OPERATION cont.  
WARNING: THIS SCOOTER WILL TIP EASIER WHEN THE SEAT IS IN ITS HIGHEST  
POSITION.  
Seat Rotation Lever  
The seat can be rotated through 360° and locked at any 45° position.  
1. Pull up on the Seat Rotation Lever and rotate the seat to the desired  
position.  
2. Release the handle to lock the seat at any 45° position.  
WARNING: DO NOT ATTEMPT TO DRIVE YOUR BUZZAROUND LITE IN ANY SEAT  
POSITION OTHER THAN FULLY FORWARD.  
Flip-Up Armrests  
Pull up on the end of either armrest to flip it up for easy transfer on and off your  
scooter.  
Seating  
The Golden Technologies Buzzaround Lite seat is available in black vinyl.  
Page 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
RIDING YOUR BUZZAROUND LITE™  
MOUNTING  
Note: For you first driving sessions, make certain that your Golden Technologies  
Buzzaround Litestarts out on a level surface and that you will continue driving  
on a level surface.  
To Get On Your Buzzaround Lite  
WARNING: BE SURE YOUR SEAT IS LOCKED IN THE FORWARD POSITION BEFORE  
OPERATING.  
Make certain that the seat is positioned for safe and easy  
mounting.  
Position yourself in the seat.  
Use the seat rotate lever to position the seat in the fully forward  
direction.  
Fasten your lap belt, if so equipped.  
BASIC DRIVING  
1. Make certain that you are seated safely and properly on your Buzzaround  
Lite.  
2. Turn the speed control dial fully counterclockwise to its slowest setting.  
RISK OF ACCIDENTS!  
Never touch the freewheel/brake release lever while driving.  
Never switch the scooter to the freewheel mode when somebody is sitting  
on it.  
For proper operation, the freewheel/brake release lever should always be  
securely engaged.  
Do not disengage the motor when on an incline.  
NOTE: Reverse movement of the scooter may not occur when the speed control  
dial is set fully counterclockwise at its slowest setting, especially when the  
batteries are not fully charged.  
3. Insert the key into the keyhole.  
4. Push the key all the way into the key receptacle to power the scooter.  
5. Place your hands on the handgrips.  
If you wish to drive forward, position your right thumb on the drive  
control lever marked “F” and push forward.  
If you wish to drive in reverse, position your left thumb on the drive  
control lever marked “R” and push forward.  
6. Press against the thumb lever to gently accelerate your Buzzaround Lite.  
Page 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
RIDING YOUR BUZZAROUND LITEcont.  
7. Release the lever to allow your Buzzaround Lite to come gently to a full  
stop.  
8. Practice these two basic functions until you feel that you have control of  
your scooter.  
EMERGENCY BRAKING: LET GO OF THE DRIVE LEVER!  
The drive lever automatically returns to the central position if you let go. The scooter  
automatically brakes using the electric regenerative brake.  
Steering  
Steering your Golden Technologies Buzzaround Lite is easy and logical.  
1. With both hands on the handgrips of the tiller, turn the tiller to the right to  
travel to the right.  
2. With both hands on the handgrips of the tiller, turn the tiller to the left to  
travel to the left.  
3. Make certain to maintain sufficient clearance when turning your scooter so  
that the rear wheels will clear any obstacle.  
WARNING: TURNING TOO SHARPLY AROUND A CORNER CAN CAUSE THE SCOOTER  
TO TIP. AVOID THIS DANGER AT ALL TIMES BY STEERING A WIDE ARC AROUND  
CORNERS AND OBSTACLES. ALSO, TO AVOID THE RISK OF TIPPING, REDUCE SPEED  
BEFORE NEGOTIATING ANY TURNS.  
Steering in a tight spot  
If you must steer in a tight spot, such as entering a doorway or when turning  
around:  
1. Bring your Buzzaround Lite to a full stop.  
2. Turn the speed control dial to the slowest setting (Fully counter clockwise)  
3. Turn the tiller to the direction in which you wish to drive.  
4. Press gently on the appropriate thumb lever and slowly turn your  
Buzzaround Lite.  
For more information on dealing with obstacles and tight spots, see “Control  
through tight spots” on the next page.  
Steering in Reverse  
Backing up your Buzzaround Lite requires attention to what you are doing  
1. Use your left thumb to press against the drive control lever marked “R”.  
2. Turn the tiller to the left to drive in reverse to the left.  
3. Turn the tiller to the right to drive in reverse to the right.  
Note: Your Buzzaround Lite speed in reverse is fifty percent of the maximum  
speed set on the speed control dial.  
Page 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
RIDING YOUR BUZZAROUND LITEcont.  
Control through tight spots  
As you use your Buzzaround Liteto increase your mobility, you will  
undoubtedly encounter some obstacles that will require practice to negotiate  
smoothly and safely. Below are some common obstacles that you may meet  
during the daily use of your scooter. Listed with those obstacles are some  
driving tips that should help you conquer those obstacles. Learn and follow  
those tips, and with surprising ease you will soon be in control of your scooter as  
you maneuver it through doors, up and down ramps, up and over curbs, through  
grass and gravel, and up and down inclines.  
Doors  
Approach any unfamiliar door slowly.  
Notice if the door has a knob or a push bar.  
Determine if the door opens towards you or away from you.  
Do not try to use your own strength to open the door. Learn to use the  
power of your scooter to do the majority of the work for you.  
If the door opens away from you:  
1. Use one hand to turn the doorknob or to operate the push bar.  
2. Use your other hand to steer the scooter and to gently press on the thumb  
lever that will move your scooter slowly forward.  
3. Use your arm to push the door gently open.  
4. Drive through the doorway.  
5. If it is a self-closing door, it will close behind you.  
6. If it is not a self-closing door, stop your scooter when it is clear of the door  
and use your hand to push the door closed.  
If the door opens towards you:  
1. Use one hand to turn the doorknob or to pull the handle.  
2. Keep your grip on the knob or on the handle.  
3. Use your other hand to steer your scooter and to gently press the thumb  
lever that will move your scooter slowly in reverse.  
4. Allow the power of your Buzzaround Lite to pull the door completely open.  
5. When the door is completely open, stop your scooter.  
6. Drive through the doorway while keeping your hand on the door to prevent  
it from hitting or blocking your scooter.  
7. If it is a self-closing door, it will close behind you.  
8. If it is not a self-closing door, pull it closed behind you.  
Ramps  
Because of the American Disabilities Act (ADA), many buildings are fitted with  
ramps that provide access for scooters and for other mobility vehicles.  
Page 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
RIDING YOUR BUZZAROUND LITEcont.  
When proceeding up any ramp, curb, or incline:  
Lean forward in your seat to move your center of gravity forward for  
maximum stability and safety.  
RISK OF ACCIDENTS!  
Negotiating curbs requires practice.  
Please observe the maximum obstacle heights of 2 inches.  
Please start practicing curb climbing with small curbs.  
If the ramp has a switchback, good cornering ability is required.  
Maneuver your scooter so that the front wheels take wide swings around  
the corners of the ramp.  
Doing this will allow your scooter’s back wheels to follow a wide arc  
around the corner, staying clear of obstacles.  
If you must stop your scooter while driving up a ramp:  
Starting up again simply requires that you apply gentle and steady forward  
power (pressure to the right-hand thumb lever).  
Accelerate gently after stopping on any incline.  
Driving down a ramp:  
Keep your Buzzaround Litespeed control dial set fully counterclockwise  
at the slowest speed setting.  
If you must come to a stop, release the thumb control lever slowly and  
smoothly.  
Max incline GB106:  
6°  
Max incline GB106XR:  
7.5°  
Grass and Gravel  
Your Buzzaround Lite performs admirably on grass, gravel, and hills, but you  
must follow the operational parameters presented in this manual. Refer to the  
“Safety” section. If you are unsure about any situation, avoid it. Common sense  
is your best protection  
Feel free to use your Buzzaround Lite on lawns or in park areas.  
Avoid long or high grass, which may wrap around your scooter’s axles.  
Page 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
DIAGNOSTICS SYSTEM  
Any fault condition on the controller or scooter will cause the “Power  
on/diagnostics” LED to flash. The LED light located on the faceplate of the  
scooter will tell you about the problem in how it flashes.  
LED Flashes 1 time pause, 1 time, and pause. Batteries are low scooter still  
operates.  
LED Flashes 2 times, pause, 2 times, pause. Batteries are very low, scooter will  
not drive.  
LED Flashes 3 times, pause, 3 times, pause. Over voltage to controller.  
LED Flashes 5 times, pause, 5 times, pause. Brake in freewheel or brake  
connection problem.  
LED Flashes 6 times, pause, 6 times, pause. Paddle or speed potentiometer  
problem.  
LED Flashes 7 times, pause, 7 times, pause. Paddle or speed potentiometer  
problem.  
LED Flashes 8 times, pause, 8 times, pause. Motor disconnected or faulty.  
LED Flashes 9 times, pause, 9 times, pause. Controller fault.  
WARNING: DO NOT OPERATE THE SCOOTER IF THE BATTERY IS NEARLY  
DISCHARGED. FAILURE TO COMPLY WITH THIS CONDITION MAY LEAVE THE USER  
STRANDED IN AN UNSAFE POSITION.  
This is the  
“LED” light  
that will flash  
in the event  
of a problem.  
Page 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
GENERAL CARE AND MAINTENANCE  
Main Circuit Breaker  
The 35-amp circuit breaker and exposed reset button are located on the front of  
the battery cover. The button is visible through the battery cover. If your  
Buzzaround Litefails to operate, your main circuit breaker may have tripped.  
Circuit Breaker  
WARNING: DO NOT ATTEMPT ELECTRICAL REPAIRS. CONSULT  
GOLDEN TECHNOLOGIES OR YOUR AUTHORIZED GOLDEN  
TECHNOLOGIES DEALER.  
WARNING: NEVER SOAK YOUR SCOOTER IN ANY LIQUID.  
THIS MAY CAUSE PERSONAL INJURY AND/OR DAMAGE TO YOUR  
SCOOTER.  
Page 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
Possible causes for the main circuit breaker to trip  
“Run-down” batteries.  
Over exerting the motor.  
Possible solutions:  
Recharge your batteries.  
If the problem persists, have an authorized Golden Technologies dealer  
“load test” the batteries to assure they are not damaged.  
If the problem persists, assure your battery charger is operating properly.  
Resetting the Main Circuit Breaker  
If the main circuit breaker trips as a result of “run-down” batteries or because of a  
temporary overload, reset the circuit breaker using the following directions:  
1. Wait 5 minutes to allow the motor and electronics board to cool, or return  
to “normal” operating temperature.  
2. Press in on the main circuit breaker reset button.  
WARNING: BE SURE YOU REMOVE THE KEY FROM THE KEY RECEPTACLE BEFORE  
RESETTING YOUR SCOOTER.  
NOTE: If the main circuit breaker continues to trip, there is an underlying  
electrical fault that needs professional attention. Please contact your local  
Golden Technologies Dealer.  
NOTE: Do not reset your main circuit breaker repeatedly. You must correct the  
underlying problem. Failure to correct the problem could cause injury or damage  
and will void the warranty.  
Page 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
GENERAL CARE AND MAINTENANCE  
Wheels and Tires  
Your Buzzaround Litescooter is equipped with “split-rim” wheels and foam-  
filled tires.  
Front Tire  
Rear Tire  
Solid/Foam-filled  
Solid/Foam-filled  
How to change a tire assembly:  
1. Remove the center nut.  
2. Remove the tire assembly from the scooter  
3. Install a new tire assembly onto the axle.  
4. Install and tighten the center nut.  
NOTE: All tires on your Buzzaround Lite are foam-filled. This means that there  
is NO air in any tire. The tires are filled with foam. This means you will never  
have a flat tire even if you puncture the tire.  
IF YOUR BUZZAROUND LITE DOES NOT OPERATE  
Make certain that the brake handle is set to the engaged (forward)  
position.  
Check the main circuit breaker. If necessary, reset the circuit breaker.  
Make certain that the speed adjustment dial is at the desired setting.  
Be sure that the key is all the way in the key receptacle and the scooter is  
“ON” (note the green “LED” light is illuminated)  
WARNING - ONLY START DRIVING IF EVERYTHING IS IN WORKING ORDER! HAVE ANY  
AND ALL DEFECTS REPAIRED IMMEDIATELY!  
IF NONE OF THE ABOVE PROCEDURES SOLVE THE PROBLEM, CONTACT  
YOUR AUTHORIZED GOLDEN TECHNOLOGIES DEALER.  
LUBRICATION All of the bearings on your Golden Technologies Buzzaround  
Lite are permanently lubricated and sealed. No lubrication is required.  
Page 24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
GENERAL CARE AND MAINTENANCE  
WARNING: THE BATTERIES USED ON YOUR SCOOTER HOLD A SUBSTANTIAL AMOUNT  
OF POWER. SHORTING OF THE TERMINALS CAN RESULT IN BURNS OR OTHER  
INJURIES AND IN DAMAGE TO THE BATTERIES AND TO THE ELECTRONIC  
COMPONENTS OF YOUR BUZZAROUND LITE. ALWAYS USE CARE AND CAUTION WHEN  
HANDLING THE BATTERIES.  
Battery Charging Information  
Note: Your scooter may be equipped with either “GEL”, “Lead Acid”, or “AGM”  
batteries. These batteries do NOT have “memory”. It is not necessary to  
completely discharge the batteries before charging them.  
Note: If you are not going to use your Buzzaround Lite for an extended time,  
fully charge the batteries before storing your scooter. The batteries can be left  
unmaintained for up to 6 months if they are first fully charged and kept at room  
temperature (approximately 72° F).  
Note: if you have not used your scooter for more then three days, make certain  
that you charge the batteries on the night before you are going to use your  
scooter. This will ensure that you start operating your scooter with a full charge  
on the batteries.  
Note: If you use your scooter during the day, charge the batteries as soon as  
you are finished using it. The charger is fully automatic. Following this  
procedure will prepare you scooter for a full day’s service each day.  
Note: If you use your scooter sparingly over the course of the day, and have not  
reduced the charge on the batteries by any great amount, it may not be  
necessary to charge the batteries every night.  
Battery Maintenance  
Lead Acid, Gel-cell or AGM deep-cycle batteries are used for operating your  
Buzzaround Lite  
These batteries are maintenance-free.  
There is no danger of spillage or leakage, so these batteries are safe to  
transport on aircraft, busses, trains, etc.  
By following the procedures set out in this manual, you can expect  
extended life from your batteries.  
Page 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
GENERAL CARE AND MAINTENANCE  
If the battery terminals become corroded:  
Corrosion can cause a poor electrical connection and operational  
problems.  
Clean corroded battery terminals with a stiff brush and a solution of baking  
soda and water.  
CLEANING YOUR BUZZAROUND LITE™  
Tires  
Clean the tires with ordinary kitchen-type cleaners and a damp cloth.  
Do not use solvents on tires. Solvent can cause the tire material break to  
down or become too soft.  
Body  
The body (rear shroud, deck shroud) of your scooter is formed ABS plastic and is  
painted for style and durability. Each Buzzaround Lite comes standard with three  
sets of quick-snap color shrouds in Red, Blue and Sahara. Colors can be  
changed by gently snapping off the pieces.  
Do not use a sharp object when removing shroud pieces.  
Clean the body of your scooter with a damp cloth. Do not hose down your  
scooter! Dry with a clean soft cloth.  
Use cool water mixed with a mild soap to remove dirt and oils.  
Use a non-abrasive car wax on the ABS body parts.  
Buff by hand with a soft cloth.  
Seat  
Vinyl Seat:  
Clean with a mild soap or mild detergent and a damp cloth.  
A vinyl cleaner may also be used.  
Page 26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
CARE AND MAINTENANCE OF YOUR  
BUZZAROUND LITE™  
Charger and Batteries  
The Buzzaround Lite scooter comes equipped with a 24 Volt rechargeable  
battery pack.  
FIRE HAZARD!!  
Do not cover the battery charger and ventilation slot while charging batteries.  
Only use the battery charger in well-ventilated areas.  
To Charge the Battery Pack:  
1. Make certain your key is in the “OFF”  
position.  
2. Remove charger and AC cord from back of seat.  
3. Plug the charger into the charger port on the battery pack and into a  
working electrical outlet.  
Note: A red “LED” light should now illuminate, showing the batteries  
are charging.  
4. When the charging cycle is complete a green “LED” light will illuminate,  
indicating a complete charge.  
5. Unplug and stow the charger and cord into the AC cord pack.  
Troubleshooting Tips:  
If batteries fail to charge within 12 hours  
Check the battery connections.  
It may be necessary to have the batteries “load tested” by your dealer.  
It may be necessary to have the charger tested.  
Note: The battery pack can be charged while it is installed on the scooter or  
when it is detached from the scooter.  
WARNING: Do not leave the battery pack and charger plugged in for more  
than 12 hours. Damage to the battery pack and a hazardous condition may  
result.  
Page 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
DISASSEMBLING AND TRANSPORTING YOUR  
BUZZAROUND LITE™  
Your Buzzaround Litescooter is designed to be disassembled easily in order  
be transported. When disassembling your scooter, please be sure to follow  
these simple instructions.  
Step 1 - Place your scooter on a level surface.  
WARNING: BE SURE YOUR KEY IS OUT OF THE KEYHOLE BEFORE YOU BEGIN  
DISASSEMBLING YOUR BUZZAROUND LITE.  
Step 2 - (Optional) Remove the arms from the seat. This will reduce the weight  
of the seat making it easier to lift.  
Step 3 - While holding the seat rotation lever up, grip the seat and remove from  
the scooter – Your seat will pull out of the post. Grip the seat on opposite sides  
and, with a firm grip, pull the seat straight up towards you to remove.  
“Pop” the seat.  
Page 28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
DISASSEMBLY OF YOUR  
BUZZAROUND LITE™ cont.  
Step 4 - Lift the battery box from the scooter. This will unlock the frame latch  
automatically.  
“Pull” the battery box.  
Step 5 - Loosen tiller adjustment knob and fold the tiller down flat. Then tighten  
the adjustment knob to secure the tiller in its new position. Once the tiller is flat,  
you may use it as a handle for easy transportation.  
Loosen this knob to lay tiller flat.  
Turn this knob to lock the front wheel  
Step 6 - Lock tiller lock – This knob is found just above the front wheel. Push in  
and turn clockwise 90 degrees. You should lock the front wheel to keep it from  
turning side to side to help control while carrying.  
Page 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
DISASSEMBLY OF YOUR  
BUZZAROUND LITE Cont.  
Tighten the knob fully before lifting!  
WARNING – BE CAREFULL NOT TO PINCH YOUR FINGER BETWEEN THE FRAMES. THIS  
AREA IS A PINCH POINT AND REQUIRES YOUR FULL ATTENTION.  
Step 7 - Hold seat post with one hand and push the rear section apart as shown  
below to disconnect the front and rear frame sections.  
“Push” the rear down to separate connections and front from rear.  
Page 30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
ASSEMBLY OF YOUR BUZZAROUND LITE™  
WARNING: DO NOT SIT ON OR OPERATE YOUR SCOOTER UNLESS BATTERY BOX IS IN  
PLACE AND THE LOCKING MECHANISM IS ENGAGED.  
WARNING: BE AWARE OF ANY POSSIBLE PINCH POINTS WHEN CONNECTING THE  
REAR FRAME TO THE FRONT FRAME. PLEASE NOTE WARNING LABLES AT PINCH  
POINTS WHEN ASSEMBLING.  
Pinching and crushing hazard!  
Increased hazards due to pinching or crushing result due to the component  
weight (such as batteries) during preparation for transport and maintenance  
work.  
-
-
Always carry out any work to be done with great care.  
Always try to get help from a second person, especially when stowing  
parts for transport.  
Pinch Point : A pinch point is an area where you MUST consider your fingers to  
be sure your fingers DO NOT become pinched between two metal areas. The  
greatest chance of pinch points become possible during the assembly of the  
Buzzaround Litescooter. See photo below to become knowledgeable with this  
area.  
WARNING!!!  
Be sure not to position a finger between  
the metal frames! This can cause  
injury. Look very carefully before  
assembling!  
Page 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
ASSEMBLING YOUR GB-106 BUZZAROUND LITE™  
WARNING -- INJURY HAZARD DUE TO IMPROPER ASSEMBLY!  
Ensure that all components in the scooter have been correctly assembled.  
After assembly, check that all locking devices are holding correctly.  
BE SURE YOU HAVE ALL THE IMPORTANT PARTS!  
1.  
Line up the front and rear components.  
WARNING: WATCH FINGER PLACEMENT! BE CAREFUL NOT TO PINCH YOUR  
FINGERS!  
2.  
Connect the front and rear frame sections and connect the  
components!  
WARNING: WATCH YOUR FINGERS!  
Notice how the front component connects to the rear component.  
Page 32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
ASSEMBLING YOUR BUZZAROUND LITE™  
1.  
2.  
3.  
4.  
Make certain both the front and rear frames are locked.  
Install battery pack.  
Install your seat.  
Position your tiller  
WARNING – MAKE SURE YOU TIGHTEN YOUR TILLER TO BE SURE IT IS LOCKED!  
5.  
Unlock your front wheel lock knob.  
WARNING – IF YOU DON’T UNLOCK YOUR TILLER LOCK KNOB, YOUR TILLER WILL NOT  
TURN! THIS COULD CAUSE INJURY.  
Set your Tiller angle  
using the tiller lock  
knob.  
Install your Seat  
Unlock front wheel lock knob.  
Engage your brake!  
Page 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
INSTALLING THE SEAT  
1. Hold the seat on an angle so you can see the seat swivel post  
underneath  
2. Place the seat swivel post into the seat post as shown below.  
WARNING: Pinch Point! Keep hands and clothing clear of the seat swivel post and  
seat post.  
Seat  
Swivel  
Post  
Seat  
Post  
Accident hazard due to non-engaged seat!  
Ensure that the seat is properly engaged after getting on by turning the seat slightly left  
and right.  
Accident hazard due to incorrect seat position!  
Always turn the seat to face forwards and engage it before driving.  
If the seat is in any other position, the possibility of tipping is increased.  
Before turning the seat, always ensure that the scooter is on an even and solid surface.  
Page 34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
Transporting Your GB-106 Buzzaround Lite™  
Note: Buzzaround Litescooters can be equipped with docking devices for  
loading into/onto a vehicle by means of mechanical lift or hoist. Golden  
Technologies does not sell this lifting equipment, however you may contact your  
local home health care dealer for more information.  
To Transport your Buzzaround Lite  
You will want to consider the best way for transportation. Do you own a van?  
Do you own a SUV? Do you own a compact car? Depending on what type of  
vehicle you transport the Buzzaround Lite in, you will want to plan where you  
will store your scooter while driving.  
Disassemble or fold down the seat and tiller to easily load into your  
vehicle.  
Do not lift your Buzzaround Lite by its plastic body parts. These parts are  
not designed to be used as handles. Also, damage to these parts is NOT  
covered in any warranty.  
Do not use tires or wheels to lift the rear carriage. The carriage may  
rotate and cause injury or damage.  
Use moving blankets or other forms of padding to protect your GB-106  
Buzzaround Lite during transportation.  
WARNING: IF YOUR SCOOTER AND ITS COMPONENTS ARE NOT PROPERLY  
AND SECURELY STOWED, THE SCOOTER OR COMPONENTS MAY SHIFT WHILE  
DRIVING CAUSING INJURY OR DAMAGE.  
If the scooter is transported in the vehicle when fully assembled:  
-
-
no one should sit on the scooter during loading.  
no one should sit on the scooter during transport.  
WARNING: If you use an outside lift system, be sure to secure your  
Buzzaround Lite as it could fall off the lift. Also, if any electronics are  
exposed to moisture they may fail.  
Page 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
BUZZAROUND LITE™ SPECIFICATIONS  
Model  
Length  
Width  
Tires  
GB106  
36.5”  
21.25”  
Foam Filled NON-  
GB106XR  
36.5”  
21.25”  
Foam Filled NON-  
PNUEMATIC  
PNUEMATIC  
Front  
Rear  
8”  
8”  
8”  
8”  
Weight Capacity  
Maximum Speed  
Ground Clearance  
Operating Range  
(standard pack)  
Operating Range  
(extended range pack)  
Batteries  
250 pounds  
4 mph  
2”  
250 pounds  
4 mph  
2”  
8 miles*  
10 miles*  
12 VDC – 12Ahx2 Standard 12 VDC – 15Ahx2  
Extended Range  
Turning Radius  
3-Point Turn  
31” (ANSI/RESNA)  
39”  
90 Degree Corridor Turn 28”  
31” (ANSI/RESNA)  
39”  
28”  
Weight  
Seat 15”x15”  
Seat 16”x16”  
18 pounds  
27.7 pounds  
18 pounds  
27.7 pounds  
Standard battery 21 pounds  
pack  
Extended range  
battery pack  
25 pounds  
Front half  
Rear half  
Freewheel mode  
Maximum incline  
Electronic speed  
control  
32 pounds  
24 pounds  
Yes  
6 degrees  
Yes  
32 pounds  
24 pounds  
Yes  
7.5 degrees  
Yes  
Brakes  
Charger  
Electro-mechanical  
Off board  
Electro-mechanical  
Off board  
Rear wheel drive  
Sealed transaxle, motor 24  
VDC  
45 amp/programmable  
Sealed transaxle,  
motor 24 VDC  
45  
Controller  
amp/programmable  
Page 36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
Consumer Limited Warranty  
Scooters  
Effective June 1, 2008  
The following warranty is granted only to the INITIAL Consumer who has purchased  
our product and commences on the Date of Purchase by the Consumer from an  
Authorized Golden Technologies’ Provider. The Consumer must have a warranty  
registration card filed with Golden Technologies to receive service. This warranty  
supersedes all previous warranties for all scooter models effective June 1, 2008.  
The warranty covers the following scooter models:  

Buzzaround  
GB106/106XR/106XP3  
Liteway GL100  
 Companion GC222/223  
 Avenger GA531/541  
 Companion  
GC322/323/325  


Companion GC422  
Lifetime Limited Warranty:  
For the life of the scooter, from the date of purchase from an authorized Golden  
Technologies’ dealer, in the event of defective materials or workmanship, Golden  
Technologies will repair or replace at our option any of the following structural frame  
components found to be defective by an authorized Golden Technologies representative:  


Steel Frame  
Frame Welds  
 Tiller Frame  
 Front Fork  
 Seat Post  
Two-Year Warranty:  
For the period of two years from the date of purchase, in the event of defective materials or  
workmanship, Golden Technologies will repair or replace at our option with any new or  
reconditioned components any of the following drive train components found to be defective  
by an authorized Golden Technologies representative:  

Transaxle  
 Motor/Brake Assembly (electrical function  
only)  
Note: An increase in operating noise of the transaxle DOES NOT constitute a defect.  
With normal wear and tear, operating noise is expected to increase.  
For the period of two years from the date of purchase, in the event of defective materials or  
workmanship, Golden Technologies will repair or replace at our option any of the following  
electronic assemblies found to be defective by an authorized Golden Technologies  
representative:  


Electronic Controller  
Battery Charger  
 Dash Assembly  
 Potentiometer Assembly  
 Wire Harness(es)  
Note: While charging batteries, it is normal for the battery charger to heat up. Heat  
coming from the battery charger does not constitute a defect.  
Page 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
One-Year Limited Warranty:  
For the period of one year from the date of purchase, in the event of defective materials or  
workmanship, Golden Technologies will repair or replace at our option any of the following  
parts found to be defective by an authorized Golden Technologies representative:  



Bearings  
Bushings  
Seat Swivel  
 Rubber Components  
(excludes tires)  
 Armrests  
 Plastic  
Components  
(excludes body)  
Mechanism  
Items not listed are covered at the discretion of Golden Technologies. Any accessories,  
standard or optional, supplied by Golden Technologies, are covered for a period of one year  
from the date of purchase with the particular unit.  
Warranty Exclusions:  
Golden Technologies does not provide warranty on any of the following items which may  
require replacement due to the normal wear and tear of day to day usage:  



Tires and Tubes  
ABS Plastic Shrouds  
Armrest Pads  
 Motor Brushes  
 Bulbs/Fuses  
 Brake Pads  
 Upholstery  
This warranty also excludes the following:  



Batteries (Please consult battery manufacturer for any implied warranty)  
Loss or theft of components (ie: keys, baskets, etc.)  
Damage caused by:  
¾
¾
¾
¾
¾
Battery fluid spillage or leakage  
Abuse, misuse, accident or negligence.  
Improper operation, maintenance or storage.  
Commercial use or use other than normal.  
Repairs and/or modifications made to any part without the specific  
consent of Golden Technologies.  
¾
¾
Exceeding the specified weight capacity of the unit.  
Accessories other than those supplied or approved by Golden  
Technologies.  
¾
¾
¾
Failure to adhere to the product instructions  
Acts of Nature, such as lightning strikes, earthquakes, etc……  
Circumstances beyond the control of Golden Technologies.  

ANY PARTS ALTERED OR REPAIRED BY UNAUTHORIZED PERSON.  
Warranty Service:  
Warranty Service must be performed by an authorized Golden Technologies representative.  
Golden Technologies reserves the right to replace warranted part(s) with refurbished or new  
part(s) at our discretion. All labor charges, service calls, transportation costs or any other  
charge(s) associated with the installation of any warranted part(s) are the responsibility of the  
consumer. Warranty is for the replacement of the parts only and does not include freight for  
the replacement parts. Consumers are not to return any item(s) to Golden Technologies  
without prior written authorization. Any damages incurred while warranted part(s) are in  
transport are the sole responsibility of the consumer.  
There is no other express warranty.  
Implied warranties, including those of merchantability and fitness for a particular purpose are excluded. Liabilities  
for consequential damages are excluded. This warranty gives you specific rights and you may also have other rights  
which may vary from state to state.  
Page 38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
Scooter Warranty Card  
Please mail this document to:  
Golden Technologies, Inc.  
Warranty Registration Office  
401 Bridge Street  
Old Forge, PA 18518  
Please fill in your Buzzaround Liteinformation below. This information will be  
useful in the event that you ever need to contact Golden Technologies  
concerning your scooter.  
Model __________  
Serial Number _____________________  
Body Color _____________  
Date of Purchase _________________  
Options______________________________________________________  
Your Golden Technologies representative or dealer  
Name________________________________________________________  
Company _____________________________________________________  
Address ______________________________________________________  
_____________________________________________________________  
I have read and fully understand:  
____ My Golden Technologies Buzzaround Lite owner’s manual,  
including the sections on operating instructions, safety guidelines,  
maintenance and battery instructions.  
____ Golden Technologies Buzzaround Lite Warranty  
____ My Golden Technologies Buzzaround Lite dealer has instructed me  
on how to operate my scooter.  
Signature____________________________________  
Telephone (_____) ________ - __________________  
Page 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR  
Updated 07/08  
Golden Technologies GB106 and  
GB106 XR Buzzaround Lite™  
401 Bridge Street, Old Forge, PA 18518  
Tel: 800-624-6374 Fax: 570-451-7494  
Y O U R L I F E I N M O T I O N  
BuzzLite GB106/GB106XR-OWN-0708  
Page 40  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Echo Blower PB 410 User Manual
Fender Musical Instrument Amplifier PR 524 User Manual
Fisher Price Baby Toy B1836 User Manual
Ford Automobile Accessories HM02 E 10712484 User Manual
Furman Sound Stereo Amplifier SP 20AB User Manual
Gaggenau Cooktop KG 291 110 CA User Manual
Garland Range GXHP11 User Manual
GarrettCom Switch 6K25e User Manual
Generac Portable Generator 5747 User Manual
Generac Power Systems Portable Generator 9592 3 User Manual