Setting options for Clearview Cordless Caller Display
You may select the LCD contrast level (factory setting as level 2); the call alert tone
either On or Off (factory setting is Off); the clock either 12 or 24 hour format (factory
setting is 24 hour); and the alarm clock either On or Off (factory setting is Off).
In case of difficulty
What to do if “CHECK BASE” is seen on Clearview display
This means that the base is disconnected, or the ID code was not set properly, or the
Clearview display is out of range. Check base is connected to telephone modular
socket, verify ID code, or move the Clearview display closer to the base and press
Page to confirm in range.
1. Press Set for 5 seconds, until you see “--OPTIONS--”.
2. Press Review Forward repeatedly to scroll through current option settings.
3. Any time you wish to change a setting, press Set.
4. The last section in this option mode is name setting. If you want to exit from the
option mode, simply press Review Forward. Press Set to enter name setting for
phone directory (see section below).
Clearview
How to change the base identification code?
Your base comes with a random identification generated at the factory. Shouldyouwant
to change it, pressSet thenPage and keep both keys depressed for 5 seconds until the
new random code is shown. Remember you must then set your Clearview display to
this new code.
Cordless Caller Display Unit
Alarm clock setting
1. Press Timer for 5 seconds, until you see “ALARM ON or OFF”.
2. Press Set to toggle the On/Off setting.
Care of your Clearview Cordless Caller Display
User Guide
3. When Alarm On, press Review Forward or Backward to show the current alarm
time setting and press Set if you want to change it.
The Caller Display should be cleaned with a soft dry cloth. It is important to unplug the
main base unit from the mains supply and telephone socket prior to cleaning. Do not
apply polishes or strong cleaning agents as these could damage the moulding.
4. Use Review Forward or Backward to scroll the hour and Learn to advance to
minute.
THUNDERSTORMS: During thunderstorms, lightning may strike telephone lines, this
can damage any equipment attached to a line, including telephones and telephone
equipment. Ifpossible, unplugyourtelephoneortelephoneequipmentfromthesocketin
the event of a storm.
5. When the alarm time setting is OK, press Set to finish setting and you will hear a
confirmationbeep.
Note - When the alarm has been set to On, a “*” symbol appears at the bottom right
corner of the display. When the alarm is activated it will beep for 1 minute. Press any
key to stop the alarm.
Conditions of use
Your Geemarc Clearview Cordless Caller Display has been approved for use on
private direct exchange lines and business lines. It is also approved for use with
approved compatible PABX’s.
The alarm will operate at the same time the next day unless it is set to off. See setting
options above.
Name setting for Phonebook Directory for name mapping (50 entries)
1. At the last part of the option mode, the display shows “NAME SETTING”. Press
Set.
2. Press Review Forward or Backward to scroll to the record that you want to input.
3. Press Set to select the record. The display will show the record number and “0”
in the telephone number field.
4. Use Review Forward or Backward to select the digit. Learn to advance to next
digit. Delete for correction.
5. When all digits are OK, press Set to jump to the name field.
6. Press Review Forward or Backward to select the character. Press Learn to
advance to next character.
7. When all characters in the name are OK, press Set to finish this record setting and
you will hear the confirmation beep. The display will advance to the next record.
8. Press Timer to quit the name setting mode.
Your exchange line should be a standard exclusive (DEL) and not a shared service or
party line.
Your line should be Multi Frequency (TONE) dialling. If you experience any difficulty
contact your network service provider.
Approval
ThisproductcomplieswiththerequirementsofECdirective89/336EEC. Anymodification
of the unit or connection to non approved accessories may affect this compliance.
Guarantee
FromthemomentyourGeemarcproductispurchased, GeemarcTelecomLtdguarantee
it for one year. During this time, all repairs or replacements at our option are free of
charge. Carriage to Geemarc is payable by the sender.
Theguaranteedoesnotcoveraccidents, negligenceorbreakagestoanyparts. Theunit
parts must not be tampered with or taken apart by anyone who is not an authorised
Geemarc representative.
Note - Phonebook directory entries cannot be deleted but can be changed by editing
them.
Editing a phonebook directory entry
The guarantee of Geemarc Telecom Ltd in no way limits your legal rights.
1. At the last part of the option mode, the display shows “NAME SETTING”. Press
Shouldyouexperienceaproblemthencontactourhelplineortheretailerfromwhomyou
purchased your Geemarc product.
Set.
2. Press Review Forward or Backward to scroll to the record that you want to
change.
If you do have to return the product to Geemarc Telecom Ltd, please enclose a note of
your name and address with details of the problem being experienced. Also, enclose a
copy of your purchase receipt and a cheque for £5 to cover return postage and packing.
YOUR RECEIPT IS YOUR GUARANTEE
3. Press Set to select the record.
4. Press Delete until number is erased.
5. Use Review Forward orBackwards to select the digit. Learn to advance to next
digit.
Please note:The guarantee applies to the United Kingdom only.
6. When all digits are OK, press Set to jump to name field.
7. Press Delete until name is erased.
Geemarc reserve the right to modify the design and specification of the product and
related equipment in line with our policy of continuous product improvement.
8. Use Review Forward or Backwards to select the character. Learn to advance
to next character.
GeemarcTelecom Ltd
5 Swallow Court
Swallowfields
Welwyn Garden City
Hertfordshire AL7 1SB
9. When all characters are OK press Set to select next entry to be edited by using
Review Forward or Backward.
10. Press Timer to quit editing.
Helpline - 01707 384438 Facsimile - 01707 372529
Download from Www.Somanuals.com. All Manuals Search And Download.
|