ge.com
Safety Instructions . . . . . . . . .2–4
Owner’s Manual
Operating Instructions
JT912–30″ Single Wall Oven
JT952–30″ Double Wall Oven
Clock and Timer . . . . . . . . . . . .12
Control Lockout . . . . . . . . . . . .12
Controls . . . . . . . . . . . . . . . . . . . .5
Convection . . . . . . . . . . . . . .15–17
Oven . . . . . . . . . . . . . . . . . .10, 11
Probe . . . . . . . . . . . . . . . . . .14, 17
Sabbath Feature . . . . . . . . . . . . .9
Self-Cleaning Oven . . . . . . .20, 21
Special Features . . . . . . . . . . . .6–8
Thermostat . . . . . . . . . . . . . . . .19
Timed Baking
and Roasting . . . . . . . . . . . .13, 18
Care and Cleaning
Cleaning Oven Door . . . . . . . . .23
Control Panel . . . . . . . . . . . . . .25
Lift-Off Oven Door . . . . . . . . . .23
Light Bulb . . . . . . . . . . . . . . . . .22
Oven Floor . . . . . . . . . . . . . . . .23
Probe . . . . . . . . . . . . . . . . . . . . .24
Removing Packaging Tape . . . .22
Shelves . . . . . . . . . . . . . . . . . . . .24
Stainless Steel Surfaces . . . . . . .25
Troubleshooting Tips . . . . .26–28
Consumer Support
Consumer Support . . .Back Cover
Product Registration . . . . . . 29, 30
Warranty . . . . . . . . . . . . . . . . . .31
Write the model and serial
numbers here:
Model # __________________
Serial #____________________
You can find them on a label
on the front of the oven behind
the oven door on single oven
models, or the front of the lower
oven behind the oven door on
double oven models.
49-80470 07-07 JR
Download from Www.Somanuals.com. All Manuals Search And Download.
ge.com
WARNING!
SAFETY PRECAUTIONS
I Do not store flammable materials in
I Never leave jars or cans of fat drippings in
an oven.
or near your oven.
I Do not store or use combustible materials,
gasoline or other flammable vapors and
liquids in the vicinity of this or any other
appliance.
I
CAUTION: Items of interest to
children should not be stored in cabinets
above an oven; children climbing on the
oven to reach items could be seriously
injured.
I Stand away from the oven when opening
the oven door. Hot air or steam which
escapes can cause burns to hands, face
and/or eyes.
I Never wear loose-fitting or hanging
garments while using the appliance. Be
careful when reaching for items stored in
cabinets over the oven. Flammable material
could be ignited if brought in contact with
hot surfaces or heating elements and may
cause severe burns.
I Do not heat unopened food containers.
Pressure could build up and the container
could burst, causing an injury.
I Keep the oven vent unobstructed.
I Use only dry pot holders—moist or damp
pot holders on hot surfaces may result in
burns from steam. Do not let pot holders
touch hot heating elements. Do not use a
towel or other bulky cloth.
I Keep the oven free from grease buildup.
I Place the oven shelf in the desired position
while the oven is cool. If shelves must be
handled when hot, do not let pot holder
contact the heating elements.
I For your safety, never use your appliance
for warming or heating the room.
I When using cooking or roasting bags in the
oven, follow the manufacturer’s directions.
I Do not let cooking grease or other
flammable materials accumulate in or
near the oven.
I Pulling out the shelf to the stop-lock is a
convenience in lifting heavy foods. It is also
a precaution against burns from touching
hot surfaces of the door or oven walls.
I Do not use water on grease fires. Never pick
up a flaming pan. Turn the controls off.
I Do not use the oven to dry newspapers.
I Flame in the oven can be smothered
completely by closing the oven door and
turning the oven off or by using a multi-
purpose dry chemical or foam-type fire
extinguisher.
If overheated, they can catch on fire.
I Do not use the oven for a storage area.
Items stored in an oven can ignite.
I Do not leave paper products, cooking
utensils or food in the oven when not
in use.
I Do not touch the heating elements or the
interior surface of the oven. These surfaces
may be hot enough to burn even though
they are dark in color. During and after
use, do not touch, or let clothing or other
flammable materials contact any interior
area of the oven; allow sufficient time for
cooling first.
I After broiling, always take any broiler pan
out of the oven and clean it. Leftover
grease in a broiler pan can catch fire next
time you use the pan.
I Clean only parts listed in this Owner’s
Manual.
I Potentially hot surfaces include oven vent
openings, surfaces near the openings,
crevices around the oven door, the edges
of the window and metal trim parts above
the door.
I Do not use aluminum foil to line
oven bottoms. Improper installation
of aluminum foil may result in a risk
of electric shock or fire.
I REMEMBER: The inside surface of the oven
may be hot when the door is opened.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
COOK MEAT AND POULTRY THOROUGHLY…
Cook meat and poultry thoroughly—meat to at least an INTERNAL temperature of 160°F and poultry
to at least an INTERNAL temperature of 180°F. Cooking to these temperatures usually protects against
foodborne illness.
SELF-CLEANING OVEN
I Do not clean the door gasket. The door
gasket is essential for a good seal. Care
should be taken not to rub, damage or
move the gasket.
I Before self-cleaning the oven, remove
shiny, silver-colored oven shelves (on some
models) and all other cookware.
I Be sure to wipe up excess spillage before
I Do not use oven cleaners. No commercial
oven cleaner or oven liner protective
starting the self-cleaning operation.
I If the self-cleaning mode malfunctions,
turn the oven off and disconnect the power
supply. Have it serviced by a qualified
technician.
coating of any kind should be used in or
around any part of the oven. Residue from
oven cleaners will damage the inside of the
oven when the self-clean cycle is used.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the oven controls.
(Throughout this manual, features and appearance may vary from your model.)
ge.com
Double oven control shown.
Oven Control, Clock and Timer Features and Settings
BAKE Pad
Press to select the bake function.
SELF CLEAN STD/LOW Pad
Press to select self-cleaning function. See
the Using the self-cleaning oven section.
BROIL HI/LO Pad
OVEN LIGHT ON/OFF Pad
Press to turn the oven light on or off.
Press to select the broil function.
CONVECTION BAKE Pad
Press to select baking with the convection
function.
DELAY START Pad
Use along with COOKING TIME or
SELF CLEAN STD/LOW pads to set the
oven to start and stop automatically at a
time you set.
CONVECTION ROAST Pad
Press to select roasting with the convection
function.
COOK TIME Pad
START Pad
Must be pressed to start any cooking or
cleaning function.
Press and then press the number pads to set
the amount of time you want your food to
cook. The oven will shut off automatically
when the cooking time has run out, unless
the Cook and Hold feature was set.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for
the timer or automatic oven operations.
CLEAR/OFF Pad
Press to cancel ALL oven operations except
the clock and timer.
If “F– and a number or letter” flash in the display and
the oven control signals, this indicates a function
error code. Press the CLEAR/OFF pad. Allow the oven to
cool for one hour. Put the oven back into operation. If the
function error code repeats, disconnect the power to the
oven and call for service.
CLOCK Pad
Press before setting the clock.
Number Pads
Use to set any function requiring numbers
such as the time of day on the clock, the
timer, the oven temperature, the internal
food temperature, the start time and
length of operation for timed baking
and self-cleaning.
If your oven was set for a timed oven operation
and a power outage occurred, the clock and all
programmed functions must be reset.
The time of day will flash in the display when there
has been a power outage.
KITCHEN TIMER ON/OFF Pad
Press to select the timer feature.
PROBE Pad
Press when using the probe to cook food.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Special features of your oven control.
Your new touch pad control has additional features that you may choose to use. The following are the features
and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain in
the control’s memory until the steps are repeated.
When the display shows your choice, press the START pad. The special features will remain in memory after
a power failure, except for the Sabbath feature, which will have to be reset.
12-Hour Shutoff
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or
after 3 hours during a broil function.
Press the DELAY START pad until
no shdn (no shutoff) appears in
the display.
Press the START pad to activate the
no shutoff and leave the control set
in this special features mode.
If you wish to turn OFF this feature,
follow the steps below.
Press the BAKE and BROIL HI/LO
pads (on double oven models, use
the upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
NOTE: On double oven models, this activates this
special feature for both ovens.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
Press the CLOCK pad again to
change to the 24-hour military time
clock. The display will show 24 hr.
If this is the choice you want, press
the START pad.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Press the BAKE and BROIL HI/LO
pads (on double oven models, use
the upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
Press the CLOCK pad again to black
out the clock display. The display
will show OFF. If this is the choice
you want, press the START pad.
NOTE: If the clock is in the black-out mode, you
will not be able to use the Delay Start function.
Press the CLOCK pad once. The
display will show 12 hr. If this is
the choice you want, press the
START pad.
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections, but you may change this
to use the Celsius selections.
Press the BROIL HI/LO and COOK
TIME pads again at the same time.
The display will show C (Celsius).
Press the BAKE and BROIL HI/LO
pads (on double oven models, use
the upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
Press the START pad.
NOTE: On double oven models, the new setting
will be displayed for both ovens.
Press the BROIL HI/LO and COOK
TIME pads at the same time. The
display will show F (Fahrenheit).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ge.com
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFF pad is pressed. This continuous
6-second beep may be canceled.
Press the KITCHEN TIMER ON/OFF
pad. The display shows CON BEEP
(continuous beep). Press the
KITCHEN TIMER ON/OFF pad
again. The display shows BEEP.
(This cancels the one beep every
6 seconds.)
To cancel the 6-second beep:
Press the BAKE and BROIL HI/LO
pads (on double oven models use
the upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
Press the START pad.
NOTE: On double oven models, this cancels the
end-of-cycle tone for both ovens.
Tone Volume
This feature allows you to adjust the tone
volumes to a more acceptable volume. There are
three possible volume levels.
Press the OVEN LIGHT ON/OFF pad
again. The display will show 1 BEEP.
This is the quietest volume level.
Press the BAKE and BROIL HI/LO pads
(on double oven models, use the
upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Choose the desired sound level
(1 BEEP, 2 BEEP, 3 BEEP).
Press the OVEN LIGHT ON/OFF pad.
The display will show 2 BEEP. This is
the middle volume level.
Press the START pad to activate the
desired level shown.
Press the OVEN LIGHT ON/OFF pad
again. The display will show 3 BEEP.
This is the loudest volume level.
NOTE: On double oven models, this activates this
special feature for both ovens.
Auto Recipe™ Conversion (on some models)
When using convection bake, the Auto Recipe™
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
To deactivate the feature:
Press the BAKE and BROIL HI/LO
pads (on double oven models, use
the upper oven controls) at the
same time for 3 seconds, until the
display shows SF.
This feature is activated so the display
will show the actual converted (reduced)
temperature. For example, if you enter a regular
recipe temperature of 350°F and press the
START pad, the display will show CON
and the converted temperature of 325°F.
Press the CONVECTION BAKE pad.
The display will show CON ON. Press
the CONVECTION BAKE pad again.
The display will show CON OFF.
NOTE: This feature does not convert convection
bake cooking times, only regular baking
temperatures.
Press the START pad.
To reactivate the feature, repeat steps 1–3
above but press the START pad when
CON ON is in the display.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Special features of your oven control.
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
Timed Baking or Roasting is finished.
Press the COOK TIME pad.
The display will show Hld OFF.
Press the COOK TIME pad again
to activate the feature. The display
will show Hld ON.
NOTE: This feature can only be programmed to
work with Timed Baking or Roasting. (See the
Using the timed baking or roasting features
section.) After Timed Baking or Roasting has
automatically stopped, the programmed cook
and hold will automatically start.
Press the START pad to activate
the cook and hold feature and
leave the control set in this special
features mode.
To activate this feature for use after
Timed Baking or Roasting, follow the
steps below.
Press the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Sabbath Feature.
(Designed for use on the Jewish Sabbath and Holidays.) (on some models)
ge.com
The Sabbath feature can be used for baking/roasting only. It cannot be used for convection, broiling, self-cleaning or
Delay Start cooking.
NOTE: The oven light comes on automatically (on some models) when the door is opened and goes off when the door is closed.
The bulb may be removed. See the Oven Light Replacement section. On models with a light switch on the control panel, the oven
light may be turned on and left on.
How to Set for Regular Baking/Roasting
Make sure the clock shows the correct time of day and
the oven is off.
Using the number pads, enter the desired
temperature between 170°F and 550°F.
No signal or temperature will be given.
Press and hold both the BAKE and BROIL
HI/LO pads, at the same time, until the
display shows SF.
Touch the START pad.
After a random delay period of
NOTE: If bake or broil appears in the
display, the BAKE and BROIL HI/LO pads
were not touched at the same time.
Touch the CLEAR/OFF pad and begin
again.
approximately 30 seconds to 1 minute,
⊃
⊃
will appear in the display indicating
that the oven is baking/roasting. If ⊃
doesn’t appear in the display, start
again at Step 4.
⊃
Tap the DELAY START pad until SAb bAtH
appears in the display.
To adjust the oven temperature, touch the
BAKE pad, enter the new temperature using
the number pads, and touch the START pad.
When the display shows ⊃ the
Touch the START pad and ⊃ will appear
oven is set in Sabbath. When the
in the display.
⊃
display shows ⊃
the oven is
NOTE: The CLEAR/OFF and COOK TIME pads are
active during the Sabbath feature.
Touch the BAKE pad. No signal will
be given.
baking/roasting.
How to Set for Timed Baking/Roasting – Immediate Start and Automatic Stop
Make sure the clock shows the correct time of day and
the oven is off.
Touch the BAKE pad. No signal will be
given.
Press and hold both the BAKE and BROIL
HI/LO pads, at the same time, until the
display shows SF.
Using the number pads, enter the
desired temperature. No signal or
temperature will be given.
NOTE: If bake or broil appears in the
display, the BAKE and BROIL HI/LO pads
were not touched at the same time.
Touch the CLEAR/OFF pad and begin
again.
Touch the START pad.
After a random delay period of
approximately 30 seconds to 1 minute,
⊃
⊃ will appear in the display indicating
that the oven is baking/roasting. If ⊃
doesn’t appear in the display, start
again at Step 7.
⊃
Tap the DELAY START pad until SAb bAtH
appears in the display.
Touch the START pad and ⊃ will appear
in the display.
To adjust the oven temperature, touch the
BAKE pad, enter the new temperature using
the number pads and touch the START pad.
Touch the COOK TIME pad.
Touch the number pads to set the
desired length of cooking time between
1 minute and 9 hours and 99 minutes.
The cooking time that you entered will
be displayed.
When the display shows ⊃ the
When cooking is finished, the display will
change from ⊃ ⊃ to ⊃ and 0:00 will appear,
indicating that the oven has turned OFF but is
still set in Sabbath. Remove the cooked food.
oven is set in Sabbath. When the
⊃
display shows ⊃
the oven is
baking/roasting.
Touch the START pad.
How to Exit the Sabbath Feature
Touch the CLEAR/OFF pad.
turn off after 12 hours. no shdn indicates
that the oven will not automatically
turn off.
If the oven is cooking, wait for a random
delay period of approximately 30 seconds
to 1 minute, until only ⊃ is in the display.
Touch the START pad.
Press and hold both the BAKE and BROIL
HI/LO pads, at the same time, until the
display shows SF.
NOTE: If a power outage occurred while
the oven was in Sabbath, the oven will
automatically turn off and stay off even
when the power returns. The oven control
must be reset.
Tap the DELAY START pad until 12 shdn
or no shdn appears in the display. 12 shdn
indicates that the oven will automatically
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the oven.
To avoid possible burns, place the shelves in the desired position before you turn the oven on.
Before you begin…
The shelves have stop-locks, so that when
placed correctly on the supports, they will
stop before coming completely out, and
will not tilt.
To remove a shelf, pull it toward you,
tilt the front end up and pull it out.
To replace, place the end of the shelf
(stop-locks) on the support, tilt up the
front and push the shelf in.
When placing and removing cookware,
pull the shelf out to the bump on the
shelf support.
The oven has 7 shelf positions.
How to Set the Oven for Baking or Roasting
Press the BAKE pad.
Type of Food
Shelf Position
Press the number pads to set the
desired temperature.
Frozen pies
(on cookie sheet)
C or D
Press the START pad.
Angel food cake
B
B
Check food for doneness at
minimum time on recipe. Cook
longer if necessary.
Bundt or pound cakes
Biscuits, muffins,
brownies, cookies,
cupcakes, layer
cakes, pies
C or D
Press the CLEAR/OFF pad when
cooking is complete.
NOTE: A cooling fan may automatically turn on
and off to cool internal parts. This is normal, and
the fan may continue to run even after the oven is
turned off.
Casseroles
C or D
Preheating and Pan Placement
Preheat the oven if the recipe calls for it.
To preheat, set the oven at the correct
temperature. Preheating is necessary for
good results when baking cakes, cookies,
pastry and breads.
Baking results will be better if baking pans
are centered in the oven as much as
possible. Pans should not touch each
other or the walls of the oven. If you need
to use two shelves, stagger the pans so one
is not directly above the other, and leave
approximately 11⁄2″ between pans, from
the front, back and sides of the wall.
For ovens without a preheat indicator light or
tone, preheat 10 minutes.
Aluminum Foil
A smaller sheet of foil may be used to
catch a spillover by placing it on a lower
shelf several inches below the food.
Do not use aluminum foil on the bottom
of the oven.
Never entirely cover a shelf with
aluminum foil. This will disturb the heat
circulation and result in poor baking.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ge.com
How to Set the Oven for Broiling
Leave the door open to the broil stop position.
The door stays open by itself, yet the proper
temperature is maintained in the oven.
NOTE: Food can be broiled with the door
closed but it may not brown as well because
the oven heating element will cycle on and off.
broiling times. This guide is based on meats at
refrigerator temperature.
Press the BROIL HI/LO pad once for
HI Broil.
To change to LO Broil, press the
BROIL HI/LO pad again.
Place the meat or fish on a broiler
grid in a broiler pan designed
for broiling.
Press the START pad.
If your oven is connected to 208
volts, rare steaks may be broiled by
preheating the broiler and positioning
the oven shelf one position higher.
When broiling is finished, press the
CLEAR/OFF pad.
Follow suggested shelf positions in
the Broiling Guide.
The size, weight, thickness, starting temperature
and your preference for doneness will affect
NOTE: Broil will not work if the temperature
probe is plugged in.
Broiling Guide
†
The U.S. Department of Agriculture says
“Rare beef is popular, but you should
know that cooking it to only 140°F means
some food poisoning organisms may
survive.” (Source: Safe Food Book. Your
Kitchen Guide. USDA Rev. June 1985.)
Quantity and/
or Thickness
Shelf
First Side Second Side
Food
Position Time (min.) Time (min.)
Comments
Ground Beef 1 lb. (4 patties)
E
E
10
10
7
9
Space evenly. Up
to 8 patties take
about the same
time.
Well Done
1/2 to 3/4″ thick
Beef Steaks
Rare†
1″ thick
E
E
E
8
10
12
6
8
Steaks less than
1″ thick cook
through before
browning.
Pan frying is
recommended.
Slash fat.
Medium
1 to 11⁄2 lbs.
Well Done
10
Rare†
Medium
Well Done
11⁄2″ thick
E
E
E
10
15
25
8
2 to 21⁄2 lbs.
14–16
20–25
Chicken
1 whole
C
25
10
Reduce time about
5 to 10 minutes
per side for cut-up
chicken. Brush
each side with
melted butter.
Broil skin-side-
down first.
2 to 21⁄2 lbs.,
split lengthwise
Lobster Tails 2–4
6 to 8 oz. each
C
E
13–16
Do not
Cut through back of
shell. Spread open.
Brush with melted
butter before
broiling and after
half of broiling
time.
turn over.
Fish Fillets
1/4 to 1/2″ thick
5
5
8
Handle and turn
very carefully.
Brush with lemon
butter before and
during cooking, if
desired. Preheat
broiler to increase
browning.
Ham Slices
(precooked)
1″ thick
D
8
Increase time 5 to
10 minutes per
side for 11⁄2″ thick
or home-cured ham.
Pork Chops
Well Done
2 (1/2″ thick)
2 (1″ thick) about 1 lb.
E
D
10
15
10
15
Slash fat.
Lamb Chops
Medium
Well Done
Medium
Well Done
2 (1″ thick) about 10
to 12 oz.
E
E
E
E
10
12
14
17
9
10
Slash fat.
2 (11⁄2″ thick) about 1 lb.
12
12–14
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the clock, timer and control lockout.
To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of
day cannot be changed during a timed
baking or self-cleaning cycle.
Press the CLOCK pad.
Press the number pads.
Press the START pad.
Make sure the clock is set to the
correct time of day.
To Set the Timer
Press the KITCHEN TIMER ON/OFF
When the timer reaches :00,
the control will beep 3 times
followed by one beep every
6 seconds until the KITCHEN TIMER
ON/OFF pad is pressed.
pad.
Press the number pads until the
amount of time you want shows
in the display. For example, to set
2 hours and 45 minutes, press 2, 4
and 5 in that order. If you make a
mistake, press the KITCHEN TIMER
ON/OFF pad and begin again.
The timer is a minute timer only.
The timer does not control oven
operations. The maximum setting on
the timer is 9 hours and 59 minutes.
The 6-second tone can be canceled by
following the steps in the Special features
of your oven control section under Tones
at the End of a Timed Cycle.
Press the START pad.
After pressing the START pad, SET disappears;
this tells you the time is counting down, although
the display does not change until one minute has
passed. Seconds will not be shown in the display
until the last minute is counting down.
To Reset the Timer
If the display is still showing the time
If the remaining time is not in the display
remaining, you may change it by pressing (clock, delay start or cooking time are in
the KITCHEN TIMER ON/OFF pad, then
press the number pads until the time
you want appears in the display.
the display), recall the remaining time by
pressing the KITCHEN TIMER ON/OFF pad
and then pressing the number pads to
enter the new time you want.
To Cancel the Timer
Press KITCHEN TIMER ON/OFF pad twice.
Control Lockout
When this feature is on and the touch
pads are pressed, the control will beep
and the display will show LOC ON.
Your control will allow you to lock out the touch
pads so they cannot be activated when pressed.
NOTE: On double oven models, this activates this
feature for both ovens.
NOTES:
I The control lockout mode affects all touch
pads. No touch pads will work when this
feature is activated.
To lock/unlock the controls:
Press the 9 and 0 pads at the same
time for 3 seconds, until the display
shows LOC ON.
I The adjustment will be retained in memory
after a power failure.
To unlock the control, press the 9
and 0 pads at the same time for 3
seconds, until the display shows
LOC OFF.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timed baking and roasting features. (on some models)
ge.com
On double oven models, you can use timed baking in one oven while using self-clean in the other; you can also use
timed baking in both ovens at the same time.
NOTE: Foods that spoil easily—such as milk, eggs, fish, stuffings, poultry and pork—should not be allowed to sit for
more than 1 hour before or after cooking. Room temperature promotes the growth of harmful bacteria. Be sure that
the oven light is off because heat from the bulb will speed harmful bacteria growth.
How to Set an Immediate Start and Automatic Stop
The oven will turn on immediately and cook for a
selected length of time. At the end of the cooking
time, the oven will turn off automatically.
Press the START pad.
The display will show the changing
temperature (starting at 100°F) and the
cooking time. The display starts changing
once the temperature reaches 100°F.
Make sure the clock shows the correct
time of day.
Press the BAKE pad.
NOTE: On double oven models, when using both
ovens at the same time, the times showing in the
display will be for the last oven set. To display the
time set for the first oven set, press the COOK
TIME pad for that oven.
Using the number pads, enter the
desired temperature.
Press the COOK TIME pad.
The oven will continue to cook for the
programmed amount of time, then shut
off automatically, unless the Cook and
Hold feature was set. See the Special
features of your oven control section.
NOTE: If your recipe requires preheating, you
may need to add additional time to the length of
the cooking time.
Using the number pads, enter the
desired baking time. The oven
temperature and the cooking time
that you entered will be displayed.
Press the CLEAR/OFF pad to clear
the display.
How to Set a Delayed Start and Automatic Stop
If you would like to check the times you
You can set the oven control to delay-start the
oven, cook for a specific length of time and then
turn off automatically.
have set, press the DELAY START pad to
check the start time you have set or press
the COOK TIME pad to check the length
of cooking time you have set.
Make sure the clock shows the correct
time of day.
When the oven turns on at the time
of day you have set, the display will
show the changing temperature
(starting at 100°F) and the cooking
time. The display starts changing once
the temperature reaches 100°F.
Press the BAKE pad.
Using the number pads, enter the
desired temperature.
Press the COOK TIME pad.
NOTE: On double oven models, when using both
ovens at the same time, the times showing in the
display will be for the last oven set. To display the
time set for the first oven set, press the DELAY
START or the COOK TIME pad for that oven.
NOTE: If your recipe requires preheating, you
may need to add additional time to the length of
the cooking time.
Using the number pads, enter the
desired baking time.
The oven will continue to cook for the
programmed amount of time, then shut
off automatically, unless the Cook and
Hold feature was set. See the Special
features of your oven control section.
Press the DELAY START pad.
Using the number pads, enter the
time of day you want the oven to
turn on and start cooking.
Press the CLEAR/OFF pad to clear
the display.
Press the START pad.
NOTE: An attention tone will sound if you are
using timed baking and do not press the START
pad after entering the baking temperature.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the probe.
For many foods, especially roasts and poultry, internal food temperature is the best test for doneness. The
temperature probe takes the guesswork out of roasting by cooking foods to the exact doneness you want.
NOTE: Double oven models have a probe in the
Cable
upper oven only.
Plug
Use of probes other than the one
provided with this product may result in
damage to the probe.
Probe
Handles
Use the handles of the probe and plug
when inserting and removing them from
the meat and outlet.
I To prevent possible burns, do not unplug
the probe from the outlet until the oven
has cooled.
I To avoid damaging your probe, do not use
tongs to pull on the cable when removing it.
The temperature probe has a
skewer-like probe at one end and a
plug at the other end that goes into
the outlet in the oven.
I Never leave your probe inside the oven during
a self-cleaning cycle.
I To avoid breaking the probe, make sure food is
completely defrosted before inserting.
I Do not store the probe in the oven.
After preparing the meat and placing it
on a trivet or a broiler pan grid designed
for broiling, follow these directions for
proper probe placement.
For roasts with no bone, insert the probe
into the meatiest part of the roast. For
bone-in ham or lamb, insert the probe
into the center of the lowest large muscle
or joint.
Lay the probe on the outside of the
meat along the top or side and mark Insert the probe into the center of dishes
with your finger where the edge of
the meat comes to on the probe.
The point should rest in the center
of the thickest meaty part of the
roast.
such as meat loaf or casseroles. When
cooking fish, insert the probe from just
above the gill into the meatiest area,
parallel to the backbone.
Insert the probe into the meatiest part of
Insert the probe completely into the the inner thigh from below and parallel
meat, up to the handle. It should
not touch bone, fat or gristle.
to the leg of a whole turkey.
How to Set the Oven For Roasting When Using the Probe
Insert the probe into the meat.
After the internal temperature of the
meat reaches 100°F, the changing
internal temperature will be shown
in the display.
Plug the probe into the outlet in the
oven. Make sure it’s pushed all the
way in. Close the oven door.
When the internal temperature of
the meat reaches the number you
have set, the probe and the oven
turn off and the oven control
signals. To stop the signal, press the
CLEAR/OFF pad. Use hot pads to
remove the probe from the food.
Do not use tongs to pull on it—they
might damage it.
Press the PROBE pad.
Press the number pads to set the
desired internal food or meat
temperature. The maximum
internal temperature for the food
that you can set is 200°F.
Press the BAKE pad.
To change the oven temperature during
the Roast cycle, press the BAKE pad and
then the number pads to set the new
temperature.
Press the number pads to set the
desired oven temperature.
Press the START pad.
IIf the probe is removed from the food before
the final temperature is reached, a tone will
sound and the display will flash until the probe
is removed from the oven.
The display will flash if the probe is inserted
into the outlet and you have not set a probe
temperature and pressed the START pad.
When the oven starts to heat, the word
LO will be in the display.
IYou can use the timer even though you cannot
14
use timed oven operations.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the convection oven.
ge.com
Convection Bake
NOTE: The convection fan will cycle on and off
while cooking to best distribute hot air in the
oven.
IIdeal for evenly browned baked foods cooked
on multiple shelves.
IGood for large quantities of baked foods.
IGood results with cookies, biscuits, muffins,
brownies, cupcakes, cream puffs, sweet rolls,
angel food cake and bread.
The convection fan circulates the heated
air evenly over and around the food.
The convection oven fan shuts off when the oven
door is opened. DO NOT leave the door open for
long periods of time while using convection
cooking or you may shorten the life of the
convection heating element.
In a convection oven, a fan circulates hot air
over, under and around the food.
This circulating hot air is evenly distributed
throughout the oven cavity. As a result, foods
are evenly cooked and browned—often in less
time with convection heat.
Multi-Shelf Convection Baking
When baking on 3 shelves, place one
shelf in the second (B) position, one
in the fourth (D) position and one in
the 6th (F) position.
When convection baking with only 1 shelf,
follow the shelf positions recommended in
the Using the oven section.
Because heated air is circulated evenly
throughout the oven, foods can be
baked with excellent results using
multiple shelves.
Multi-shelf baking may increase cook
times slightly for some foods but the
overall result is time saved. Cookies,
muffins, biscuits and other quickbreads
give very good results with multi-shelf
baking.
Multi-shelf position
Adapting Recipes…
You can use your favorite recipes in the
convection oven.
When convection baking, the Auto
Recipe™ Conversion feature automatically
reduces the set regular baking
temperature by the recommended 25°F.
See Auto Recipe™ Conversion in the Special
features of your oven control section.
I Use pan size recommended.
I Some package instructions for frozen
casseroles or main dishes have been
developed using commercial convection ovens.
For best results in this oven, preheat the oven
and use the temperature on the package.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the convection oven.
Convection Roast
IGood for large tender cuts of meat, uncovered.
When you are convection roasting, it is
important that you use a broiler pan and
grid designed for broiling for best
convection roasting results. The pan is
used to catch grease spills and the grid is
used to prevent grease spatters.
The convection fan circulates the heated
air evenly over and around the food.
Meat and poultry are browned on all
sides as if they were cooked on a
rotisserie. Heated air will be circulated
over, under and around the food being
roasted. The heated air seals in juices
quickly for a moist and tender product
while, at the same time, creating a rich
golden brown exterior.
When baking cookies, you will
get the best results if you use a
flat cookie sheet instead of a
pan with low sides.
Cookware for Convection Cooking
Before using your convection oven,
check to see if your cookware leaves
room for air circulation in the oven.
If you are baking with several pans, leave
space between them. Also, be sure the
pans do not touch each other or the
walls of the oven.
Metal and Glass
Any type of cookware will work in your
convection oven. However, metal pans
heat the fastest and are recommended
for convection baking.
IDarkened or matte-finished pans will bake
faster than shiny pans.
Paper and Plastic
IGlass or ceramic pans cook more slowly.
Heat-resistant paper and plastic
containers that are recommended for
use in regular ovens can be used in
convection ovens. Plastic cookware that
is heat-resistant to temperatures of
400°F can also be used.
For recipes like oven-baked chicken,
use a pan with low sides. Hot air cannot
circulate well around food in a pan with
high sides.
How to Set the Oven for Convection Baking or Roasting
When the oven starts to heat, the
Press the CONVECTION BAKE pad
or the CONVECTION ROAST pad.
changing temperature, starting at 100°F,
will be displayed. When the oven reaches
the temperature you set, 3 beeps will
sound.
Press the number pads to set the
desired oven temperature.
Press the START pad.
Press the CLEAR/OFF pad when
finished.
To change the oven temperature, press
the CONVECTION BAKE or CONVECTION
ROAST pad and then the number pads
to set the new temperature.
IYou will hear a fan while cooking with
convection. The fan will stop when the door is
opened, but the heat will not turn off.
IYou may hear the oven clicking during baking.
This is normal.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ge.com
How to Set the Oven for Convection Roasting when Using the Probe
When the internal temperature of
the meat reaches the number you
have set, the probe and the oven
turn off and the oven control
signals. To stop the signal, press the
CLEAR/OFF pad. Use hot pads to
remove the probe from the food.
Do not use tongs to pull on it—they
might damage it.
The display will flash PROBE and the
oven control will signal if the probe is
inserted into the outlet, and you have not
set a probe temperature and pressed the
START pad.
For best results when roasting large
turkeys and roasts, we recommend
using the probe included in the
convection oven.
Place the shelf in the lowest position
(A). Insert the probe into the meat.
Plug the probe into the outlet in the
oven. Make sure it is pushed all the
way in. Close the oven door.
CAUTION: To prevent possible burns, do not
unplug the probe from the oven outlet until the
oven has cooled. Do not store the probe in
the oven.
Press the CONVECTION ROAST pad.
Press the number pads to set the
desired oven temperature.
NOTE:
IIf the probe is removed from the food before
the final temperature is reached, a tone will
sound and the display will flash until the probe
is removed from the oven.
Press the PROBE pad.
Press the number pads to set the
desired internal meat temperature.
IYou will hear a fan while cooking with this
feature. The fan will stop when the door is
opened, but the heat will not turn off.
Press the START pad.
When the oven starts to heat, the word
LO will be in the display.
IYou can use the timer even though you cannot
use timed oven operations.
IOn double oven models, you will not be able to
use the probe in the upper oven during timed
oven operations. This is because, with the
probe, you are cooking by temperature rather
than time.
After the internal temperature of the meat
reaches 100°F, the changing internal
temperature will be shown in the display.
Convection Roasting Guide
To change the oven temperature
during the Convection Roast cycle,
press the CONVECTION ROAST pad
and then press the number pads to
set the new desired temperature.
Meats
Beef
Minutes/Lb. Oven Temp. Internal Temp.
Rib, Boneless Rib,
Top Sirloin
Rare
Medium
Well
Rare
Medium
20–24
24–28
28–32
325°F
325°F
325°F
140°F†
160°F
170°F
(3 to 5 lbs.)
Beef Tenderloin
10–14
14–18
325°F
325°F
140°F†
160°F
Pork
Bone-in, Boneless (3 to 5 lbs.)
23–27
325°F
170°F
Chops (1/2 to 1″ thick)
2 chops
4 chops
6 chops
30–35 total
35–40 total
40–45 total
325°F
325°F
325°F
170°F
170°F
170°F
Ham
Canned, Butt, Shank (3 to 5 lbs. fully cooked)
14–18
325°F
140°F
Lamb
Bone-in, Boneless (3 to 5 lbs.)
Medium
Well
17–20
20–24
325°F
325°F
160°F
170°F
Seafood
Poultry
Fish, whole (3 to 5 lbs.)
30–40 total
400°F
Lobster Tails (6 to 8 oz. each)
Whole Chicken (21⁄2 to 31⁄2 lbs.)
20–25 total
24–26
50–55 total
55–60 total
350°F
350°F
350°F
350°F
180°–185°F
180°–185°F
180°–185°F
Cornish Hens Unstuffed (1 to 11⁄2 lbs.)
Stuffed (1 to 11⁄2 lbs.)
Duckling (4 to 5 lbs.)
24–26
325°F
180°–185°F
Turkey, whole*
Unstuffed (10 to 16 lbs.)
Unstuffed (18 to 24 lbs.)
8–11
7–10
325°F
325°F
180°–185°F
180°–185°F
Turkey Breast (4 to 6 lbs.)
16–19
325°F
170°F
* Stuffed birds generally require 30–45 minutes additional roasting time. Shield legs and breast with foil to prevent
overbrowning and drying of skin.
† The U.S. Department of Agriculture says “Rare beef is popular, but you should know that cooking it to only 140°F means
some food poisoning organisms may survive.” (Source: Safe Food Book. Your Kitchen Guide. USDA Rev. June 1985.)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timed features for convection cooking.
On double oven models, you can use timed baking or roasting in one oven while using self-clean in the other; you can
also use timed baking or roasting in both ovens at the same time.
You will hear a fan while cooking with these features. The fan will stop when the door is opened, but the heat will not
turn off.
NOTE: Foods that spoil easily—such as milk, eggs, fish, stuffings, poultry and pork—should not be allowed to sit for
more than 1 hour before or after cooking. Room temperature promotes the growth of harmful bacteria. Be sure
that the oven light is off because heat from the bulb will speed harmful bacteria growth.
How to Set an Immediate Start and Automatic Stop
The oven will turn on immediately and cook for a
selected length of time. At the end of the cooking time,
the oven will turn off automatically.
Make sure the clock shows the correct time
of day.
Press the START pad.
The display will show the changing
temperature (starting at 100°F) and the
cooking time. The display starts changing
once the temperature reaches 100°F.
Press the CONVECTION BAKE or
CONVECTION ROAST pad.
NOTE: On double oven models, when using both ovens
at the same time, the times showing in the display will
be for the last oven set. To display the time set for the
first oven set, press the COOK TIME pad for that oven.
The oven will continue to cook for the
programmed amount of time, then shut
off automatically, unless the Cook and Hold
feature was set. See the Special features of your
oven control section.
Press the number pads to set the desired
oven temperature.
Press the COOK TIME pad.
NOTE: If your recipe requires preheating, you may
need to add additional time to the length of the
cooking time.
Press the number pads to set the desired
length of cooking time. The minimum
cooking time you can set is 1 minute.
The oven temperature that you set and
the cooking time that you entered will be
in the display.
Press the CLEAR/OFF pad to clear the
display if necessary. Remove the food
from the oven. Remember, even though
the oven shuts off automatically, food left
in the oven will continue cooking after
the oven turns off.
How to Set a Delayed Start and Automatic Stop
You can set the oven control to delay-start the oven,
cook for a specific length of time and then turn off
automatically.
Make sure the clock shows the correct time of
day.
Press the START pad.
NOTE: An attention tone will sound if you are using
timed baking or roasting and do not press the START
pad after entering the baking or roasting temperature.
When the oven turns on at the time of day
you have set, the display will show the
changing temperature (starting at 100°F) and
the cooking time. The display starts changing
once the temperature reaches 100°F.
NOTE: On double oven models, when using both ovens
at the same time, the times showing in the display will
be for the last oven set. To display the time set for the
first oven set, press the DELAY START or COOK
TIME pad for that oven.
Press the CONVECTION BAKE or
CONVECTION ROAST pad.
Press the number pads to set the desired
oven temperature.
Press the COOK TIME pad.
NOTE: If your recipe requires preheating, you may
need to add additional time to the length of the
cooking time.
Press the number pads to set the desired
cooking time.
Press the DELAY START pad.
The oven will continue to cook for the
programmed amount of time, then shut
off automatically, unless the Cook and Hold
feature was set. See the Special features of your
oven control section.
Press the number pads to set the time of
day you want the oven to turn on and
start cooking.
Press the CLEAR/OFF pad to clear the
display if necessary. Remove the food
from the oven. Remember, even though
the oven shuts off automatically, food left
in the oven will continue cooking after
If you would like to check the times you have set, press
the DELAY START pad to check the start time you have
set, or press the COOK TIME pad to check the length
of cooking time you have set.
the oven turns off
.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust the oven thermostat—Do it yourself!
ge.com
You may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks
to become more familiar with it. If you still think your new oven is too hot or too cold, you can adjust the
thermostat yourself.
Do not use thermometers, such as those found in grocery stores, to check the temperature setting of your oven.
These thermometers may vary 20–40 degrees.
NOTE: This adjustment will only affect baking and roasting temperatures; it does not affect broiling, convection or
self-cleaning temperatures. The adjustment will be retained in memory after a power failure.
To Adjust the Thermostat
The oven temperature can be
adjusted up to (+) 35°F hotter or (-)
35°F cooler. Press the number pads
the same way you read them. For
example, to change the oven
Press the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Press the BAKE pad for the oven
which you want to use. A two-digit
number shows in the display.
temperature 15°F, press 1 and 5.
When you have made the
adjustment, press the START
pad to go back to the time of
day display. Use your oven as
you would normally.
Press BAKE again to alternate
between increasing and decreasing
the oven temperature.
The type of margarine will affect baking performance!
Most recipes for baking have been developed using high-fat products such as butter or margarine (80% fat). If you
decrease the fat, the recipe may not give the same results as with a higher-fat product.
Recipe failure can result if cakes, pies, pastries, cookies or candies are made with low-fat spreads. The lower the fat
content of a spread product, the more noticeable these differences become.
Federal standards require products labeled “margarine” to contain at least 80% fat by weight. Low-fat spreads, on the
other hand, contain less fat and more water. The high-moisture content of these spreads affect the texture and flavor
of baked goods. For best results with your old favorite recipes, use margarine, butter or stick spreads containing at least
70% vegetable oil.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the self-cleaning oven.
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
Before a Clean Cycle
We recommend venting your kitchen
with an open window or using a
ventilation fan or hood during
the first self-clean cycle.
IMPORTANT: The health of some birds
is extremely sensitive to the fumes given
off during the self-cleaning cycle of
any oven. Move birds to another
well-ventilated room.
Remove broiler pan, broiler grid, probe,
all cookware and any aluminum foil
from the oven.
I On double oven models, you can
set a clean cycle in both ovens at the
same time. The last oven set will
automatically delay its start until the
end of the first oven’s clean cycle.
The shiny, silver-colored oven shelves
(on some models) can be self-cleaned,
but they will darken, lose their luster
and become hard to slide.
Wipe up heavy soil on the oven
bottom. (appearance may vary)
I On double oven models, you can
use timed baking in one oven and
self-clean the other at the same time.
Do not use abrasives or oven cleaners.
Clean the top, sides and outside of the
oven door with soap and water.
Make sure the oven light bulb cover
is in place and the oven light is off.
How to Set the Oven for Cleaning
Press the SELF CLEAN STD/LOW pad
once for a 4-hour clean time or
twice for a 3-hour clean time.
When the LOCKED light goes off, you will
be able to open the door.
I The words LOCKED will flash and the
oven control will signal if you set the
clean cycle and forget to close the
oven door.
A 3-hour self-clean time is
recommended for use when
cleaning small, contained spills. A
self-clean time of 4 hours or longer
is recommended for a dirtier oven.
I To stop a clean cycle, press the
CLEAR/OFF pad. When the LOCKED
light goes off indicating the oven has
cooled below the locking temperature,
you will be able to open the door.
If a time other than 4 hours or
3 hours is needed, use the number
pads and enter the desired clean
time.
You can change the clean time to any
time between 3 hours and 5 hours,
depending on how dirty your oven is.
Press the START pad.
The door locks automatically. The display
will show the clean time remaining. It will
not be possible to open the oven door
until the temperature drops below the
lock temperature and the LOCKED light
goes off.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
ge.com
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
How to Delay the Start of Cleaning
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the LOCKED light
goes off.
Press the SELF CLEAN STD/LOW pad
once for a 4-hour clean time or
twice for a 3-hour clean time.
A 3-hour self-clean time is
recommended for use when
cleaning small, contained spills. A
self-clean time of 4 hours or longer
is recommended for a dirtier oven.
When the LOCKED light goes off, you will
be able to open the door.
If a time other than 4 hours or
3 hours is needed, use the number
pads and enter the desired clean
time.
NOTE: On double oven models, you can set a
delay clean in both ovens at the same time.
The second oven set will automatically delay
the start of cleaning until the end of the first
oven’s clean cycle.
You can change the clean time to any
time between 3 hours and 5 hours,
depending on how dirty your oven is.
To recall the start time of the second oven set,
press the DELAY START pad on the controls for
the second oven.
Press the DELAY START pad.
Using the number pads, enter the
time of day you want the clean cycle
to start.
Press the START pad.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
I You cannot set the oven for cooking
until the oven is cool enough for the
door to unlock.
If white spots remain, remove them with a
soap-filled steel-wool pad and rinse thoroughly
with a vinegar and water mixture.
I While the oven is self-cleaning, you
can press the CLOCK pad to display
the time of day. To return to the
clean countdown, press the SELF
CLEAN STD/LOW pad.
These deposits are usually a salt residue
that cannot be removed by the clean
cycle.
I If the shelves become hard to slide, wipe
the shelf supports with cooking oil.
If the oven is not clean after one clean
cycle, repeat the cycle.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and cleaning of the oven.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective To assure no damage is done to the
shipping film with your fingers and slowly finish of the product, the safest way to
peel it from the appliance surface. Do
not use any sharp items to remove the
film. Remove all of the film before using
the appliance for the first time.
remove the adhesive from packaging
tape on new appliances is an application
of a household liquid dishwashing
detergent. Apply with a soft cloth and
allow to soak.
NOTE: The adhesive must be removed from all
parts. It cannot be removed if it is baked on.
Oven Light Bulb
NOTE: The glass cover (on some models) should
be removed only when cold. Wearing latex gloves
may offer a better grip.
To replace:
Socket
Put in a new 40-watt appliance bulb.
Place the tabs of the glass cover into the
grooves of the socket. Turn the glass
cover clockwise 1/4 turn.
Before replacing the bulb, disconnect
electrical power to the oven at the main
fuse or circuit breaker panel. Let the
bulb cool completely before removing it.
For your safety, do not touch a hot bulb
with a damp cloth. If you do, the bulb
will break.
31⁄2”
Maximum
length
NOTE:
Bulb
IA 40-watt appliance bulb is smaller than a
standard 40-watt household bulb.
Tab
IInstall and tighten the cover clockwise.
IReconnect electrical power to the oven.
To remove:
Glass cover
Turn the glass cover counterclockwise
1/4 turn until the tabs of the glass cover
clear the grooves of the socket. Remove
the bulb.
IFor improved lighting inside the oven, clean
the glass cover frequently using a wet cloth.
This should be done when the oven is
completely cool.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
ge.com
Cleaning the Oven Door
on the outside of the door. Do not let
To clean the inside of the door:
water drip into the vent openings.
I Because the area inside the gasket is
cleaned during the self-clean cycle, you
do not need to clean this by hand.
I The area outside the gasket and
the door liner can be cleaned with a
soap-filled or plastic scouring pad,
hot water and detergent. Rinse well
with a vinegar and water solution.
I If any stain on the door vent trim is
persistent, use a soft abrasive cleaner
and a sponge-scrubber for best results.
I Spillage of marinades, fruit juices,
tomato sauces and basting materials
containing acids may cause
discoloration and should be wiped
up immediately. When surface is cool,
clean and rinse.
I Do not use oven cleaners, cleaning
powders or harsh abrasives on the
outside of the door.
Do not rub or clean the door gasket—
it has an extremely low resistance to
abrasion.
If you notice the gasket becoming worn,
frayed or damaged in any way or if it has
become displaced on the door, you should
have it replaced.
To clean the outside of the door:
I Use soap and water to thoroughly
clean the top, sides and front of the
oven door. Rinse well. You may also
use a glass cleaner to clean the glass
Lift-Off Oven Door
The door is very heavy. Be careful when
removing and lifting the door.
With the
Bottom
edge
of slot
Hinge arm
door at the
same angle as
the removal
position, seat the
indentation of
the hinge arm
into the bottom
edge of the hinge slot. The notch in
the hinge arm must be fully seated
into the bottom of the slot.
Do not lift the door by the handle.
To remove the door:
Slot
Fully open the door.
Indentation
Pull the hinge locks down toward
the door frame, to the unlocked
position. A tool, such as a small flat-
blade screwdriver, may be required.
Hinge lock
Fully open the door. If the door will
not fully open, the indentation is
not seated correctly in the bottom
edge of the slot.
Firmly grasp both sides of the door
at the top.
Pull hinge locks down to unlock
Close door to the door removal
position, which is halfway between
the broil stop position and fully
closed.
Push the hinge locks up against the
front frame of the oven cavity, to the
locked position.
Lift door up and out until the hinge
arm is clear of the slot.
Hinge
arm
Removal position
To replace the door:
Hinge
lock
Firmly grasp both sides of the door
at the top.
Push hinge locks up to lock
Close the oven door.
Removable Oven Floor
Clean the oven floor with warm
soapy water.
To remove the oven floor:
Remove the oven door using the
instructions in the Lift-Off Oven Door
section.
When reinstalling the oven floor, be
sure to slide it all the way to the back
of the oven.
Press down and pull out the
removable oven floor.
IMPORTANT: Always replace the
removable floor before the next use.
23
Press down and pull out.
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and cleaning of the oven.
Probe
The temperature probe may be cleaned
IDo not immerse the temperature probe
in water.
with soap and water or a soap-filled
scouring pad. Cool the temperature
probe before cleaning. Scour stubborn
spots with a soap-filled scouring pad,
rinse and dry.
IDo not store the temperature probe in
the oven.
Oven Shelves
Oven shelf
Clean the oven shelves with an abrasive
cleanser or steel wool. After cleaning,
To make the shelves slide more easily,
apply a small amount of vegetable oil
rinse the shelves with clean water and dry or cooking oil to a paper towel and wipe
with a clean cloth.
the edges of the oven shelves with the
paper towel.
NOTE: The shiny, silver-colored oven shelves
(on some models) may be cleaned in the self-
cleaning oven. However, the shelves will darken
in color, lose their luster and become hard to slide
if cleaned during the self-cleaning cycle.
Oven Heating Elements
Do not clean the broil element. Any soil
To clean the bake element area, take out
will burn off when the element is heated. the removable floor (see the Removable
Oven Floor section) and gently lift the
The bake element is not exposed and
bake element. Clean with warm soapy
is under the removable oven floor. If
water. Always replace the removable floor
spillovers, residue or ash accumulate
before next use.
on the removable oven floor, wipe up
before self-cleaning.
NOTE: Failure to replace the removable floor will
adversely affect the cooking performance.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
ge.com
Control Panel
It’s a good idea to wipe the control
panel after each use. Clean with mild
soap and water or vinegar and water,
rinse with clean water and polish dry
with a soft cloth.
Do not use abrasive cleansers, strong
liquid cleansers, plastic scouring pads or
oven cleaners on the control panel—they
will damage the finish. A 50/50 solution
of vinegar and hot water works well.
Stainless Steel Surfaces (on some models)
To inquire about purchasing stainless
steel appliance cleaner or polish, or to
find the location of a dealer nearest you,
please call our toll-free number:
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the
stainless steel surface.
National Parts Center
1.800.626.2002
ge.com
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Call For Service…
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem
Possible Causes
What To Do
Control signals after
entering cooking time
or delay start
You forgot to enter a bake
temperature or cleaning
time.
• Press the BAKE pad and desired temperature or the
SELF CLEAN STD/LOW pad and desired clean time.
Food does not bake
or roast properly
Oven controls improperly set. • See the Using the oven section.
Shelf position is incorrect
or the shelf is not level.
• See the Using the oven section.
Incorrect cookware or
cookware of improper size
being used.
• See the Using the oven section.
Oven floor not in place.
• Replace the oven floor.
Oven thermostat needs
adjustment.
• See the Adjust the oven thermostat—Do it yourself!
section.
Food does not
broil properly
Oven controls improperly set. • Make sure you press the BROIL HI/LO pad.
Improper shelf position
being used.
• See the Broiling Guide.
Food being cooked
in a hot pan.
• For best results, use a pan designed for broiling.
Make sure it is cool.
Cookware not suited
for broiling.
• For best results, use a pan designed for broiling.
The probe is plugged into the • Unplug and remove the probe from the oven.
outlet in the oven.
In some areas the power
(voltage) may be low.
• Preheat the broil element for 10 minutes.
• Broil for the longest period of time recommended in
the Broiling Guide.
Clock and timer
do not work
A fuse in your home may be
blown or the circuit breaker
tripped.
• Replace the fuse or reset the circuit breaker.
Oven controls improperly set. • See the Using the clock, timer and control lockout
section.
Oven light does
not work
Light bulb is loose or defective. • Tighten or replace the bulb.
Pad operating light is broken. • Call for service.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
ge.com
Problem
Possible Causes
What To Do
Oven temperature too
hot or too cold
Oven thermostat
needs adjustment.
• See the Adjust the oven thermostat—Do it yourself!
section.
Oven will not work
A fuse in your home may
be blown or the circuit
breaker tripped.
• Replace the fuse or reset the circuit breaker.
Oven controls improperly set. • See the Using the oven section.
Oven will not self-clean
The oven temperature
is too high to set a
self-clean operation.
• Allow the oven to cool and reset the controls.
Oven controls improperly set. • See the Using the self-cleaning oven section.
The probe is plugged into
the outlet in the oven.
• Remove the probe from the oven.
“Crackling” or
“popping” sound
This is the sound of the
metal heating and cooling
during both the cooking and
cleaning functions.
• This is normal.
Excessive smoking
during clean cycle
Excessive soil.
• Press the CLEAR/OFF pad. Open the windows to rid
the room of smoke. Wait until the LOCKED light goes
off. Wipe up the excess soil and reset the clean cycle.
Oven door will
not open after a
clean cycle
Oven too hot.
• Allow the oven to cool below locking temperature.
Oven not clean after a
clean cycle
Oven controls not properly set. • See the Using the self-cleaning oven section.
Oven was heavily soiled.
• Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
“LOCKED” flashes
in the display
The self-clean cycle has
been selected but the
door is not closed.
• Close the oven door.
LOCKED light is on
The oven door is locked
when you want to cook because the temperature
inside the oven has not
• Press the CLEAR/OFF pad. Allow the oven to cool.
dropped below the
locking temperature.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Call For Service…
Troubleshooting Tips
Problem
Possible Causes
What To Do
“F— and a number
or letter” flash
in the display
You have a function
error code.
• Press the CLEAR/OFF pad. Allow the oven to cool for
one hour. Put the oven back into operation.
If the function code repeats. • Disconnect all power to the oven for at least 30
seconds and then reconnect power. If the function
error code repeats, call for service.
Display goes blank
A fuse in your home may
be blown or the circuit
breaker tripped.
• Replace the fuse or reset the circuit breaker.
The clock is in the
black-out mode.
• See the Special features of your oven control section.
• Reset the clock.
Display flashes
Power failure.
Unable to get the
display to show “SF”
Oven control pads were
not pressed properly.
• The BAKE and BROIL HI/LO pads (on double oven
models, use the upper oven controls) must be
pressed at the same time and held for 3 seconds.
“PROBE” appears in
the display
This is reminding you to
enter a probe temperature
after plugging in the probe.
• Enter a probe temperature.
Power outage,
clock flashes
Power outage or surge.
• Reset the clock. If the oven was in use, you must reset
it by pressing the CLEAR/OFF pad, setting the clock
and resetting any cooking function.
Steam from the vent
When using the convection
feature, it is normal to see
steam coming out of the
oven vent. As the number
of shelves or amount of
food being cooked increases,
the amount of visible steam
will increase.
• This is normal.
“Burning” or “oily”
odor emitting from
the vent
This is normal in a new oven • To speed the process, set a self-clean cycle for a
and will disappear in time.
minimum of 3 hours. See the Using the self-cleaning
oven section.
Strong odor
An odor from the insulation • This is temporary.
around the inside of the
oven is normal for the first
few times the oven is used.
Fan noise
A cooling fan or a convection • This is normal. The cooling fan will turn on
fan (depending on the
function you are using)
may automatically turn on.
to cool internal parts. It may run for up to 1-1/2
hours after the oven is turned off. The convection
fan will cycle on and off until the function is over
or the door is opened.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
™
GE Service Protection Plus
GE, a name recognized worldwide for quality and dependability, offers you
™
Service Protection Plus —comprehensive protection on all your appliances—
No Matter What Brand!
Benefits Include:
• Backed by GE
• All brands covered
• Unlimited service calls
• All parts and labor costs included
• No out-of-pocket expenses
• No hidden deductibles
• One 800 number to call
We’ll Cover Any Appliance.
Anywhere. Anytime.*
You will be completely satisfied with our service protection or you may request your money back
on the remaining value of your contract. No questions asked. It’s that simple.
Protect your refrigerator, dishwasher, washer and dryer, range, TV, VCR and much more—any brand!
Plus there’s no extra charge for emergency service and low monthly financing is available. Even icemaker
coverage and food spoilage protection is offered. You can rest easy, knowing that all your valuable
household products are protected against expensive repairs.
Place your confidence in GE and call us in the U.S. toll-free at 800.626.2224
for more information.
*All brands covered, up to 20 years old, in the continental U.S.
Cut here
✁
Please place in envelope and mail to:
General Electric Company
Warranty Registration Department
P.O. Box 32150
Louisville, KY 40232-2150
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Product Ownership Registration
Dear Customer:
Thank you for purchasing our product and thank you for placing your confidence in us.
We are proud to have you as a customer!
Follow these three steps to protect your new appliance investment:
Complete and mail
your Consumer
After mailing the
registration below,
store this document
in a safe place. It
contains information
you will need should
you require service.
Our service number is
Read your Owner’s
Manual carefully.
It will help you
operate your new
appliance properly.
Product Ownership
Registration today.
Have the peace of
mind of knowing we
can contact you in
the unlikely event of
safety modification.
a
1
800.GE.CARES
2 3
(800.432.2737).
Model Number
Serial Number
Important: If you did not get a registration card with your
product, detach and return the form below to
ensure that your product is registered, or register
online at ge.com.
Cut here
✁
Consumer Product Ownership Registration
Model Number
Serial Number
Mr. I Ms. I
Mrs. I
Miss I
First
Name
Last
Name
Street
Address
Apt. #
City
E-mail Address*
Zip
Code
State
Date Placed
In Use
Month
Phone
Number
_
_
Day
Year
* Please provide your e-mail address to receive, via e-mail, discounts, special offers and other important
communications from GE Appliances (GEA).
GE Consumer & Industrial
Appliances
General Electric Company
Louisville, KY 40225
ge.com
I Check here if you do not want to receive communications from GEA’s carefully selected partners.
FAILURE TO COMPLETE AND RETURN THIS CARD DOES NOT DIMINISH YOUR
WARRANTY RIGHTS.
For more information about GEA’s privacy and data usage policy, go to ge.com and click on
“Privacy Policy” or call 800.626.2224.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
GE Built-In Electric Oven Warranty.
All warranty service provided by our Factory Service Centers, or
an authorized Customer Care® technician. To schedule service,
on-line, 24 hours a day, visit us at ge.com, or call 800.GE.CARES
(800.432.2737). Please have serial number and model number
available when calling for service.
Staple your receipt here.
Proof of the original purchase
date is needed to obtain service
under the warranty.
For The Period Of: GE Will Replace:
One Year
From the date of the
original purchase
Any part of the oven which fails due to a defect in materials or workmanship.
During this limited one-year warranty, GE will also provide, free of charge, all labor
and in-home service to replace the defective part.
What GE Will Not Cover:
IService trips to your home to teach you how to
use the product.
IDamage to the product caused by accident, fire, floods
or acts of God.
IImproper installation, delivery or maintenance.
IIncidental or consequential damage caused by possible
defects with this appliance.
IFailure of the product if it is abused, misused,
or used for other than the intended purpose
or used commercially.
IDamage caused after delivery.
IProduct not accessible to provide required service.
IReplacement of house fuses or resetting of circuit
breakers.
EXCLUSION OF IMPLIED WARRANTIES—Your sole and exclusive remedy is product repair as provided in this Limited
Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose,
are limited to one year or the shortest period allowed by law.
This warranty is extended to the original purchaser and any succeeding owner for products purchased for
home use within the USA. If the product is located in an area where service by a GE Authorized Servicer is not
available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE
Service location for service. In Alaska, the warranty excludes the cost of shipping or service calls to your home.
Some states do not allow the exclusion or limitation of incidental or consequential damages. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state. To know
what your legal rights are, consult your local or state consumer affairs office or your state’s Attorney General.
Warrantor: General Electric Company. Louisville, KY 40225
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Support.
GE Appliances Website
ge.com
ge.com
ge.com
Have a question or need assistance with your appliance? Try the GE Appliances Website 24 hours a day,
any day of the year! For greater convenience and faster service, you can now download Owner’s Manuals,
order parts or even schedule service on-line.
Schedule Service
Expert GE repair service is only one step away from your door. Get on-line and schedule your service at
your convenience 24 hours any day of the year! Or call 800.GE.CARES (800.432.2737) during normal
business hours.
Real Life Design Studio
GE supports the Universal Design concept—products, services, and environments that can be used by
people of all ages, sizes and capabilities. We recognize the need to design for a wide range of physical and
mental abilities and impairments. For details of GE’s Universal Design applications, including kitchen
design ideas for people with disabilities, check out our Website today. For the hearing impaired, please call
800.TDD.GEAC (800.833.4322).
Extended Warranties
ge.com
Purchase a GE extended warranty and learn about special discounts that are available while your warranty
is still in effect. You can purchase it on-line anytime, or call 800.626.2224 during normal business hours.
GE Consumer Home Services will still be there after your warranty expires.
Parts and Accessories
ge.com
Individuals qualified to service their own appliances can have parts or accessories sent directly to their
homes (VISA, MasterCard, and Discover cards are accepted). Order on-line today, 24 hours every day or by
phone at 800.626.2002 during normal business hours.
Instructions contained in this manual cover procedures to be performed by any user. Other servicing generally
should be referred to qualified service personnel. Caution must be exercised, since improper servicing may cause
unsafe operation.
Contact Us
ge.com
If you are not satisfied with the service you receive from GE, contact us on our Website with all the details
including your phone number, or write to: General Manager, Customer Relations
GE Appliances, Appliance Park
Louisville, KY 40225
Register Your Appliance
ge.com
Register your new appliance on-line—at your convenience! Timely product registration will allow for
enhanced communication and prompt service under the terms of your warranty, should the need arise.
You may also mail in the preprinted registration card included in the packing material.
Printed in the United States
Download from Www.Somanuals.com. All Manuals Search And Download.
|