PRINTER
PP-505
(For FE-700)
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING LABEL
A warning label is attached to the
printer. Do not remove the label.
If the label is missing or damaged,
contact your dealer about replacement.
Name: Warning Label (1)
Type: 86-003-1011
Code No.: 100-236-231
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
FOREWORD
A Word to the Owner of the PP-505
Congratulations on your choice of the FURUNO PP-505 Printer.
For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for innovative
and dependable marine electronics equipment. This dedication to excellence is furthered by our
extensive global network of agents and dealers.
Your printer is designed and constructed to meet the rigorous demands of the marine
environment. However, no machine can perform its intended function unless installed, operated
and maintained properly. Please carefully read and follow the recommended procedures for
installation, operation and maintenance.
We would appreciate hearing from you, the end-user, about whether we are achieving our
purposes.
Thank you for considering and purchasing FURUNO equipment.
The PP-505 prints a depth graph or a log consisting of date, time, depth, draft, latitude,
longitude and heading.
You can choose which to print with the [MODE] key.
The main features are
•
•
•
Automatic operation; just turn on the power and the printer readies itself for printing.
Selectable printing interval.
LEDs show equipment status.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1. OPERATION.................................................................................................. 1
1.1 General..............................................................................................................................1
1.2 Panel .................................................................................................................................1
1.3 Turning on the Power.........................................................................................................2
2. REPLACEMENT OF THERMAL PAPER .................................................... 3
3. INSTALLATION ........................................................................................... 4
3.1 Complete Set.....................................................................................................................4
3.2 General Mounting Considerations......................................................................................4
3.3 Tabletop/Bulkhead Mount .................................................................................................5
3.4 Flush Mount .....................................................................................................................5
3.5 Wiring ................................................................................................................................6
4. MAINTENANCE .......................................................................................... 7
APPENDIX REPLACEMENT OF PRINTER ASSEMBLY/THERMAL HEAD AP-1
SPECIFICATIONS........................................................................................... SP-1
PACKING LIST
OUTLINE DRAWING
INTERCONNECTION DIAGRAM
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
1. OPERATION
1.1 General
1.2 Panel
Power Switch
Operation of the PP-505 is simple; just turn
on the power. The depth graph or the log,
whichever is selected for printing, is printed
out at the interval set.
PRINTER
PP-505
GRAPH
LOG
PAPER
MODE
INTERVAL
RANGE
FEED/MARK
Below are example printouts.
POWER
ON
Thermal Paper
Cover
2003/12/01 13:05:00 038.6m/01.0m 35 20.02’N/135 45.15’E 15.1kt 008.0deg
M
GRAPH
LOG
LED
Key
PAPER
13:05:00
20m
40m
60m
80m 100m
MODE
INTERVAL
RANGE
Marker
Depth graph
2003/12/01 13:05:00 038.6m/01.0m 35 20.02’N/135 45.15’E 15.1kt 008.0deg
2003/12/01 13:05:00 038.6m/01.0m 35 20.02’N/135 45.15’E 15.1kt 008.0deg
2003/12/01 13:05:00 038.6m/01.0m 35 20.02’N/135 45.15’E 15.1kt 008.0deg
2003/12/01 13:05:00 038.6m/01.0m 35 20.02’N/135 45.15’E 15.1kt 008.0deg
2003/12/01 13:05:00 038.6m/01.0m 35 20.02’N/135 45.15’E 15.1kt 008.0deg
FEED/MARK
Indicators
M
There are three (red) LEDs on the front
panel which light or blink according to
equipment status.
Heading
Speed
Longitude
Latitude
Depth,
Draft
Time
! GRAPH
Date
Lights while the depth graph is being
printed.
Depth data log
" LOG
Lights while the depth data log is being
printed.
# PAPER
Blinks when the paper has run out, and is
accompanied by the audible alarm. The
audible alarm sounds for five seconds; you
may silence it sooner by hitting any key.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Changing the mode
Feeding the paper/Printing the marker
Press the [MODE] key to change the printing
mode from depth graph to log printing
alternately.
To feed the paper, press and hold down the
[FEED/MARK] key.
Press the [FEED/MARK] key momentarily to
print the marker.
The printing interval setting is printed
whenever the [MODE] key is pressed.
1.3 Turning on the Power
Changing the printing interval
Flip down the thermal paper cover and turn
on the [POWER] switch. The PP-505 then
carries out the diagnostic test. After the test
has been completed, the printer is ready to
print depth data.
Press the [INTERVAL] key to choose printing
interval.
Depth graph: 9 s → 45 s → 90 s → 450 s
Log: 10 s → 30 s → 1 m → 10 m
Note: “Disconnect” is printed if data from the
navigation echo sounder is not being
received during printing or the
The latest data of the printing interval is
printed.
navigation echo sounder is displaying
the system menu.
When the printing interval is changed, the
printing interval setting is printed and marked
with an asterisk.
To turn off the power, press the [POWER]
switch.
Note: You can skip over setting(s) by
pressing the key consecutively within
one second.
Changing the depth range
Press the [RANGE] key to change the depth
range.
When the depth range is changed, the depth
is printed and marked with an asterisk.
Range: 5 m → 10 m → 20 m → 40 m →
100 m → 200 m → 400 m→ 800 m
Note1: Depth range automatically changes
depending on the depth range on the
navigational echo sounder.
Note2: You can skip over setting(s) by
pressing the key consecutively within
one second.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
2. REPLACEMENT OF THERMAL
PAPER
When the thermal paper runs out, the PAPER
LED blinks, printing stops automatically and
the audible alarm sounds for five seconds.
Adhesive may
remain on the paper
Tape
With 1 m of paper remaining, a red paper end
mark appears on the paper. When the red
mark appears, replace the thermal paper as
shown in the procedure below.
after tape is removed.
This may cause a
paper jam, so cut
paper to remove
adhesive.
Adhesive
REQUIRED THERMAL PAPER
Type: TP0340 (112 mm × 40 m)
Code No.: 000-801-765
4. Insert the paper into the paper insertion
slot just above the paper container and
press the [FEED/MARK] key to feed out
the paper.
(One roll supplied.)
1. Press the [FEED/MARK] key to draw out
the remaining thermal paper.
5. Set the paper in the paper container.
2. Pull the thermal paper cover forward and
take out the paper spool.
3. Curve the leading edge of the new roll
paper to ensure smooth feeding, and set
the paper spool to the new roll paper.
Confirm that
paper is fed out
through the slot.
Insertion slot
6. Press the [FEED/MARK] key to confirm
that the paper is properly aligned.
If the paper comes out with its edges
wrinkled, continue to press the
[FEED/MARK] key. Correct alignment will
be made automatically.
Red mark
7. Close the thermal paper cover.
8. Press the [MODE] key to complete the
replacement of thermal paper. (The
PAPER LED goes off.)
Reel
Note: If the PP-505 receives data when there
is no paper it doesn’t print them out
after replacing the thermal paper.
Thermal paper cover
Remedy for paper jam
If the paper is jammed cut it off at the front
panel and rewind it into the paper container.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3. INSTALLATION
3.1 Complete Set
Name
Main Unit
Type
PP-505
Mass
3.1 kg
Qty
1
Remark
(with hanger)
Spare Parts
SP08-01600
CP16-00800
1
Installation
Materials
1
Accessories
FP08-00500
OP08-4
1
1
Flush Mount Kit
Option (004-511-330)
Heat accumulation
3.2 General Mounting
Considerations
The PP-505 consumes very little power, so
there is no need for forced air ventilation.
However, it is recommended to provide at
least some space around the unit to allow for
circulation of cooling air.
This equipment can perform its intended
functions only if it is installed properly. Keep
in mind the following when selecting a
mounting location.
The unit should be kept out of direct sunlight
because of heat that can build up inside the
cabinet. Excessive heat can darken the
thermal paper.
Water spray
The PP-505 is designed and constructed to
be able to withstand the humidity and
corrosive atmosphere common to the
pilothouse, but it is not designed to be used
outside, directly exposed to the environment.
Salt water spray will most assuredly cause
damage to the sensitive components inside.
Onboard noise
To avoid mutual interference with other power
equipment, do not install this unit near a
power cable or equipment having a motor.
Mechanical shock and vibration
Compass safe distance
The PP-505 is constructed to withstand minor
shocks and engine vibration, but excessive
and continued shock can shorten the life of
the precision printer mechanism. Shock may
also degrade the print quality due to uneven
contact between the printer head and the
thermal paper.
A magnetic compass will be affected if the
printer is placed too close to the compass.
Observe the following compass safe
distances to prevent deviation to the
compass.
Standard: 1.1 m
Steering: 0.8 m
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3. INSTALLATION
3.3 Tabletop/Bulkhead
Mount
3.4 Flush Mount
Flush mount panel kit is optionally supplied.
The main unit can be mounted on a desktop,
bulkhead, or in a panel. Make sure the
selected location is strong enough to support
the main unit against possible vibration and
shock. If necessary, appropriate
Flush mount kit OP08-4
(Code No.: 004-511-330)
Name
Flush
Type
Code No.
Qty
1
reinforcement measures should be made on
the mounting area.
22-008-0125 100-103-351
mount
panel
Tabletop mount
Tapping
screw
Nylon
washer
5X20
000-800-488
000-800-728
000-861-495
4
4
4
1. Drill four pilot holes for the hanger.
2. Fix the hanger with the tapping screws
(5×20) supplied.
3. Place the unit in the hanger and tighten
knobs.
2.8X7X0.5
Pan head M3X8
screw
Hex. bolt M8X16
000-862-145
000-864-128
2
4
268
Flat
M5
M8
M8
M3
2.9 kg
107
washer
Flat
000-864-130
000-864-262
000-864-900
2
2
4
2
141
washer
Spring
washer
Rosette
washer
Flush
Knob bolt
Tapping screw
Hanger
Flat washer
Hanger washer
22-008-0126 100-103-361
22-008-0127 100-103-371
mount
angle
0.2 kg
90
60
Liner
2
120
200
480
Bulkhead mount
When the unit is installed on the bulkhead, fix
the hanger as shown below.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. INSTALLATION
1. Referring to the illustration below, prepare
a cutout in the mounting area and drill four
pilot holes for the flush mount angles.
Refer to the outline drawing at end of manual.
2. Fix the liner and the flush mount angles to
the main unit.
3.5 Wiring
Refer to the interconnection diagram at end
of manual for connection.
3. Connect the cables at the rear of main
unit.
4. Fix the main unit to the panel cutout with
four tapping screws.
5. Fix the flush mount panel to the flush
mount angles with the screws and
washers supplied.
295
280
156 Liner
116
Flush mount angle
Flush mount
panel
7
10
Flat
washer
Spring
washer
Hex. bolt
Flat washer
Tapping screws
Rosette washer
Pan head screw
Nylon washer
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. MAINTENANCE
Checking the power connector
Fuse Replacement
Check for loosened or disconnected power
connector.
To protect the equipment from serious
damage, a 3A fuse is provided on the rear
cabinet of the main unit. The fuse protects
against overvoltage/reverse polarity of the
ship’s mains or internal fault of the equipment.
If the fuse has blown, first find out the cause
of the trouble before replacing it. A fuse rated
for more than 3 A should not be used, since it
may permanently damage the equipment.
Damage due to overfusing is not covered by
the warranty.
WARNING
Do not open the cover of
the equipment.
This equipment uses high
voltage electricity which
can shock or burn.
Only qualified personnel
should work inside the
equipment.
CAUTION
Do not disassemble or modify the
equipment.
Use the correct fuse.
Fire, electrical shock or serious injury
can result.
Use of the wrong fuse can cause fire
or damage the equipment.
Diagnostic test
When turning on the power, if any fault is
detected, the appropriate LED lights.
GRAPH: ROM error
LOG: RAM1 error
PAPER: RAM2 error
If any LEDs light, contact your dealer.
Cleaning
Accumulated dust should be regularly
removed from both exterior surfaces and the
interior. The only recommended cleaning
material for exterior surfaces is a soft cloth.
For the interior, use a handheld vacuum. BE
SURE TO TURN OFF THE POWER
BEFORE CLEANING THE INSIDE OF THE
UNIT. Do not use chemical-based cleaners to
clean the display unit-they can remove paint
and markings.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX REPLACEMENT OF
PRINTER ASSEMBLY/TERMAL HEAD
A
1. Loosen the four M4 × 15 screws fixing the
rear cabinet to the main unit assembly.
2. Disconnect the connectors connected to
the rear cabinet to detach the rear
cabinet.
4. Move the carriage to position
by
rotating the carriage shaft by fingers, as
shown below, where the thermal head
assembly can be replaced easily.
Carriage Shaft
Carriage
Rear
Cabinet
A
P1
NH
4P
P5
NH
6P
M4 × 15
screw
(4 pcs.)
Main Unit Assembly
5. Remove the flexible cable support from
the carriage by lifting it toward direction
3. Separate the panel assembly from the
main unit assembly by removing the
B
as in the figure below.
recording paper from the paper container.
Flexible Cable Support
Printer
Assembly
Main Unit
Assembly
Carriage
PANEL CPU Board
P4
PH
12P
P8
PH
10P
M4 × 8
screw
(4 pcs.)
P10
PH12P
Do not
Disconnect.
Panel
Assembly
AP-1
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Pull out the connector end of the flexible
cable from the connector. Take care not to
damage the flexible cable.
9. Hold the flexible cable end with a
tweezers and pull it out until it is
positioned as shown below.
Head Holder
End of Flexible
Cable (Connector)
180°
90°
Thermal
Head
7. Remove the thermal head from the head
holder with a screwdriver as shown below,
and then take the thermal head assembly
out of the printer assembly.
10. Turn the head by 90° so that it is parallel
with the head holder as shown below.
While pulling the head holder toward you,
insert the head into the head holder.
Thermal Head
Head Holder
Screwdriver
Head
Head Holder
Carriage
Projection
Hole
Flexible Cable
8. As shown below, pass the flexible cable
(connector side) of a new thermal head
assembly beneath the guide pins.
End of Flexible
Cable
Guide Pin
AP-2
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Fix the flexible cable to the carriage with
the flexible cable support, inserting the
projection on the carriage into the hole of
the cable.
12. Fold back the end of the cable and insert
it into the connector.
180°
End of Flexible
Cable
Flexible Cable Support
Carriage
Projection
AP-3
Download from Www.Somanuals.com. All Manuals Search And Download.
FURUNO
SPECIFICATIONS OF PRINTER
PP-505
1
DATA FORMAT
1.1 Receiving System
1.2 Speed
RS-232C
9600 bps
8 bits
1.3 Data Length
1.4 Parity
Non
1.5 Stop Bit
1 bit
2
PRINTER SECTION
2.1 Printing System
2.2 Character
9 dots serial thermal head printing system
Alphanumeric
0.28 mm/ dot
300 dots
2.3 Dot Pitch
2.4 Number of Dot in Line
2.5 Number of Characters Max. 80 characters/ line
2.6 Print Speed
2.7 Roll Paper
31 characters/second
TP-0340, 112 mm (W) x 40 m (L)
3
RATED VOLTAGE/CURRENT
12-32 VDC, 0.72-0.28 A
4
ENVIRONMENTAL CONDITION
4.1 Ambient Temperature
4.2 Relative Humidity
4.3 Waterproofing
4.4 Vibration
-15°C to +55°C
95% at 40°C
IPX0
IEC 60945
5
COATING COLOR
Chassis: 2.5GY5/1.5, Panel: N3.0
SP - 1
E5540S03-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|