Fujitsu Network Card FMC 16FX FAMILY User Manual

Fujitsu Microelectronics Europe  
FMEMCU-UG-960011-10  
User Guide  
F²MC-16FX FAMILY  
ADAPTER BOARD  
ADA-16FX-ETHERNET  
USER GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADA-16FX-ETHERNET  
Warranty and Disclaimer  
Warranty and Disclaimer  
To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts  
its warranties and its liability for the ADA-16FX-ETHERNET Board and all its deliverables (eg.  
software include or header files, application examples, target boards, evaluation boards, engineering  
samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in  
accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under  
which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all  
accompanying written materials. In addition, to the maximum extent permitted by applicable law,  
Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of  
the Product and any consequential damages in cases of unauthorised decompiling and/or reverse  
engineering and/or disassembling. Note, the ADA-16FX-ETHERNET Board and all its deliverables  
are intended and must only be used in an evaluation laboratory environment.  
1.  
Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in  
accordance with the accompanying written materials for a period of 90 days form the date of  
receipt by the customer. Concerning the hardware components of the Product, Fujitsu  
Microelectronics Europe GmbH warrants that the Product will be free from defects in material  
and workmanship under use and service as specified in the accompanying written materials  
for a duration of 1 year from the date of receipt by the customer.  
2.  
Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability  
and the customer’s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s  
sole discretion, either return of the purchase price and the license fee, or replacement of the  
Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in  
original packing and without further defects resulting from the customer’s use or the transport.  
However, this warranty is excluded if the defect has resulted from an accident not attributable  
to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the  
customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH.  
3.  
4.  
To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH  
disclaims all other warranties, whether expressed or implied, in particular, but not limited to,  
warranties of merchantability and fitness for a particular purpose for which the Product is not  
designated.  
To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s  
and its supplier’s liability are restricted to intention and gross negligence.  
NO LIABILITY FOR CONSEQUENTIAL DAMAGES  
To the maximum extent permitted by applicable law, in no event shall Fujitsu  
Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever  
(including but without limitation, consequential and/or indirect damages for personal  
injury, assets of substantial value, loss of profits, interruption of business operation,  
loss of information, or any other monetary or pecuniary loss) arising from the use of  
the Product.  
Should one of the above stipulations be or become invalid and/or unenforceable, the remaining  
stipulations shall stay in full effect  
© Fujitsu Microelectronics Europe GmbH  
- 3 -  
UG-960011-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADA-16FX-ETHERNET  
Chapter 1 Contents  
1 Contents  
REVISION HISTORY............................................................................................................ 2  
WARRANTY AND DISCLAIMER ......................................................................................... 3  
1 CONTENTS...................................................................................................................... 4  
2 OVERVIEW...................................................................................................................... 5  
2.1 Abstract................................................................................................................... 5  
2.2 Features of adapter board ADA-16FX-ETHERNET v1.1 ......................................... 5  
2.3 Features supported by base board SK-16FX-EUROSCOPE (SK-16FX-100PMC) .. 5  
3 INSTALLATION............................................................................................................... 6  
3.1 Jumper settings of ADA-16FX-ETHERNET v1.1 ..................................................... 7  
4 JUMPERS AND LED’S.................................................................................................... 8  
4.1 Chip select (JP: 1, 2, 3) ........................................................................................... 8  
4.2 Ethernet jack Select (JP: 4, 5) ................................................................................. 8  
4.3 Link LED, Activity LED (LINK, ACT) ........................................................................ 9  
5 CONNECTORS.............................................................................................................. 10  
5.1 Ethernet connector (X1) ........................................................................................ 10  
5.2 Edge Connectors (X2, X3, X11) ............................................................................ 10  
6 SILK-PLOT OF THE BOARD ........................................................................................ 11  
7 RELATED PRODUCTS ................................................................................................. 12  
8 INFORMATION IN THE WWW....................................................................................... 13  
UG-960011-10  
- 4 -  
© Fujitsu Microelectronics Europe GmbH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADA-16FX-ETHERNET  
Chapter 2 Overview  
2 Overview  
2.1 Abstract  
The ADA-16FX-ETHERNET is an adapter board that can be used together with the  
evaluation board SK-16FX-EUROSCOPE (SK-16FX-100PMC). The ADA-16FX-ETHERNET  
extends the evaluation board with Ethernet connectivity. It can be used for software  
development and testing.  
The board allows the designer immediately to start with the software development before a  
final target system is available.  
2.2 Features of adapter board ADA-16FX-ETHERNET  
< 10BaseT Ethernet connectivity  
< Software example including openTCP stack is available  
< Multiplexed bus interface  
< Selectable chip select via Jumper  
< Pin header for SK-16FX-EUROSCOPE (SK-16FX-100PMC) base board  
(Note: SK-16FX-EUROSCOPE has to be ordered separately)  
2.3 Features of base board SK-16FX-EUROSCOPE (SK-16FX-100PMC)  
< 1x UART-Transceiver (SUB-D9 connector)  
< 1x USB to serial converter (Type-B connector)  
< 1x High-speed CAN-Transceiver (SUB-D9 connector)  
< 2x LED-Display (7-Segment)  
< 2x User-button  
< 1x Reset-button, Reset-LED  
< All 100 pins routed to pin-header  
< On-board 5V and 3V voltage regulators, Power-LED  
< USB power-supply (external power supply possible)  
This board must only be used for test applications  
in an evaluation laboratory environment.  
© Fujitsu Microelectronics Europe GmbH  
- 5 -  
UG-960011-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADA-16FX-ETHERNET  
Chapter 3 Installation  
3 Installation  
Remove carefully the board from the shipping box and check for any damages.  
Disconnect your SK-16FX-EUROSCOPE (SK-16FX-100PMC) evaluation board from USB  
and external power supply. Select the correct Voltage supply:  
ADA-16FX-ETHERNET is designed for 5V power supply.  
Jumper  
Setting  
1-2  
Description  
VCC is set to 5V (ADA-16FX-ETHERNET)  
VCC is set to 3.3V  
JP10 (5V/3V3)  
2-3  
Attach the adapter board to the evaluation board as shown below. The Ethernet jack has to  
face to the outer edge.  
Ethernet jack  
Note:  
Make sure to jumper the board to 5V before connecting the ADA-16FX-ETHERNET.  
UG-960011-10  
- 6 -  
© Fujitsu Microelectronics Europe GmbH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADA-16FX-ETHERNET  
Chapter 3 Installation  
3.1 Jumper settings of ADA-16FX-ETHERNET  
The following jumper settings are set by default:  
Jumper  
Description / Function  
Type  
Default  
JP1  
JP2  
JP3  
JP4  
JP5  
Use chip select line 2  
Use chip select line 3  
solder JP 2pol. Closed  
solder JP 2pol.  
solder JP 2pol.  
solder JP 3pol.  
solder JP 3pol.  
Open  
Open  
1-2  
Use chip select line 4  
Select center tap A of Ethernet jack  
Select center tap B of Ethernet jack  
1-2  
Please refer to the documentation of the evaluation board for detailed information about the  
jumper settings for the SK-16FX-EUROSCOPE (SK-16FX-100PMC).  
© Fujitsu Microelectronics Europe GmbH  
- 7 -  
UG-960011-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADA-16FX-ETHERNET  
Chapter 4 Jumpers and LED’s  
4 Jumpers and LED’s  
This chapter describes all jumpers that can be modified and all LED’s on the adapter board.  
The default setting is shown with a grey shaded area.  
4.1 Chip select (JP: 1, 2, 3)  
One out of the three chip select signals CS2, CS3 or CS4 can be selected:  
JP1, JP2, JP3 connect chip select signal of MCU to chip select signal of Ethernet chip  
Jumper  
Setting  
Description  
ON (closed)  
OFF (open)  
ON (closed)  
OFF (open)  
ON (closed)  
OFF (open)  
CS2 is connected to CHIPSEL of CS8900A  
CS2 is not connected  
JP1 (CS2)  
CS3 is connected to CHIPSEL of CS8900A  
CS3 is not connected  
JP2 (CS3)  
JP3 (CS4)  
CS4 is connected to CHIPSEL of CS8900A  
CS4 is not connected  
Default: JP1 is closed  
By default, the chip select signal CS2 of the MB96F348HS is connected to the Ethernet chip.  
4.2 Ethernet jack select (JP: 4, 5)  
The board layout is designed to be used with different Ethernet jacks.  
JP4, JP5  
Select center tap pin of Ethernet jack  
Jumper  
Setting  
Description  
1-2  
Capacitor 9 is connected to pin 4 of the  
Ethernet jack  
JP4 (AVss)  
2-3  
1-2  
2-3  
Capacitor 9 is connected to pin 7 of the  
Ethernet jack  
Capacitor 10 is connected to pin 5 of the  
Ethernet jack  
JP5 (AVcc)  
Capacitor 10 is connected to pin 8 of the  
Ethernet jack  
Default: JP4 and JP5 are set to 1-2  
By default the pins 4 and 5 of the assembled Ethernet jack are used as center tap pin. This  
setting depends on the type and manufacturer of the used Ethernet jack (see chapter 5.1).  
UG-960011-10  
- 8 -  
© Fujitsu Microelectronics Europe GmbH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADA-16FX-ETHERNET  
Chapter 4 Jumpers and LED’s  
4.3 Link LED, Activity LED (LINK, ACT)  
These LEDs display the status of the Ethernet interface.  
LED  
LINK  
ACT  
Colour  
Green  
Yellow  
Description  
Indicates that a link is established  
Indicates activity on the Ethernet  
By default the LINK LED should light directly after connected to a network.  
© Fujitsu Microelectronics Europe GmbH  
- 9 -  
UG-960011-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADA-16FX-ETHERNET  
Chapter 5 Connectors  
5 Connectors  
5.1 Ethernet connector (X1)  
This is the Ethernet jack for connecting the ADA-16FX-ETHERNET to the Ethernet. The  
connector complies with the 10BaseT standard. The used connector has integrated  
transformers for transmit and receive lines.  
The Ethernet jack and the Ethernet controller depends on the power supply voltage:  
Rx  
Tx  
Supply Voltage  
Used jack  
Ethernet Chip Adapter Board  
Transitions Transitions  
Halo HFJ11-  
1043E  
ADA-16FX-  
CS8900CQZ  
5V  
1:1  
1:1  
1:1.41  
1:2.5  
ETHERNET  
Halo HFJ11-  
1041E  
3V3  
CS8900CQ3Z  
-
5.2 Edge Connectors (X2, X3, X11)  
The edge connectors are assembled on the bottom side of the adapter board. They are used  
to attach the ADA-16FX-ETHERNET adapter board to the SK-16FX-EUROSCOPE (SK-  
16FX-100PMC) evaluation board. All used signals are provided by the edge connectors.  
Connector  
X2 (1 – 20)  
MCU Pins  
1 – 20  
X3 (71 – 100)  
X11 (51 – 70)  
71 – 100  
51 – 70  
The adapter board is powered via the edge connectors.  
UG-960011-10  
- 10 -  
© Fujitsu Microelectronics Europe GmbH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADA-16FX-ETHERNET  
Chapter 6 Silk-Plot of the Board  
6 Silk-Plot of the Board  
X2  
Ethernet  
connector  
X1  
X3  
Latch  
Latch  
Cirrus  
CS8900A  
X11  
© Fujitsu Microelectronics Europe GmbH  
- 11 -  
UG-960011-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADA-16FX-ETHERNET  
Chapter 7 Related Products  
7 Related Products  
<
<
<
SK-16FX-EUROSCOPE  
ADA-16FX-ETHERNET  
MB96F348HS  
Evaluation board with MB96F348HS  
FPT-100P-M20 package  
Adapterboard for SK-16FX-EUROSCOPE  
(SK-16FX-100PMC)  
MB96340 Series Flash MCU  
UG-960011-10  
- 12 -  
© Fujitsu Microelectronics Europe GmbH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADA-16FX-ETHERNET  
Chapter 8 Information in the WWW  
8 Information in the WWW  
Information about FUJITSU MICROELECTRONICS Products  
can be found on the following Internet pages:  
Microcontrollers (8-, 16-, and 32bit), Graphics Controllers  
Datasheets and Hardware Manuals, Support Tools (Hard- and Software)  
Linear Products: Power Management, A/D and D/A Converters  
Media Products: SAW filters, acoustic resonators and VCOs  
For more information about FUJITSU MICROELECTRONICS  
© Fujitsu Microelectronics Europe GmbH  
- 13 -  
UG-960011-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADA-16FX-ETHERNET  
Chapter 8 Information in the WWW  
Recycling  
Gültig für EU-Länder:  
Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische  
Gesetze nehmen wir dieses Gerät wieder zurück.  
Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse:  
Fujitsu Microelectronics Europe GmbH  
Warehouse/Disposal  
Monzastraße 4a  
63225 Langen  
Valid for European Union Countries:  
According to the European WEEE-Directive and its implementation into national laws we  
take this device back.  
For disposal please send the device to the following address:  
Fujitsu Microelectronics Europe GmbH  
Warehouse/Disposal  
Monzastraße 4a  
D-63225 Langen  
Germany  
UG-960011-10  
- 14 -  
© Fujitsu Microelectronics Europe GmbH  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Edelbrock Automobile Parts 1926 User Manual
Everpure Water System CG53 10 User Manual
Extron electronic Speaker System SI 3 Black User Manual
Extron electronic Switch FLS 101 User Manual
Fedders Humidifier AC1A Series User Manual
Fisher Price Building Set C5792 User Manual
FujiFilm Camera Lens YF4A SA2B User Manual
Gardena Trimmer THS 400 User Manual
GE Air Conditioner ASW18 User Manual
Gianni Industries Door Electromagnetic Lock User Manual