Fujitsu Laptop P2110 User Manual

Fujitsu LifeBook

P Series

BIOS Guide

LifeBook P Series Model:

P2110

Document Date: 05/31/02

Document Part Number: FPC58-0680-01

F U J I T S U P C C O R P O R AT I O N

Download from Www.Somanuals.com. All Manuals Search And Download.

M a i n M e n u

MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS

The Main Menu allows you to set or view the current

system parameters. Follow the instructions for

Navigating Through the Setup Utility to make any

changes.

the field’s function and any special information needed

to help understand the field’s use.

P O I N T

The following tables show the names of the menu fields

for the Main menu and its submenus, all of the options

for each field, the default settings and a description of

System Time and System Date can also be set from your

operating system without using the setup utility. Use

the calendar and time icon on your Windows Control

Panel.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power

Boot

Info

Exit

Item Specific Help

System Time:

System Date:

[14:57:01]

[05/26/2002]

Adjust calendar clock.

Primary Master

Secondary Master

[TOSHIBA MK3017GAP-(PM)]

[None]

<Tab>, <Shift-Tab>, or

<Enter> selects field.

Language:

[English (US)]

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

F9 Setup Defaults

F10 Save and Exit

Enter Select

Sub-Menu

Figure 1. Main Menu

Menu Field

Options

Default

Description

System Time:

–—

Sets and displays the current time. Time is in a 24 hour format

of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).

Example: 16:45:57. You may change each segment of the time

separately. Move between the segments with the [Tab] key

and/or [Shift] + [Tab] keys.

System Date:

–—

Sets and displays the current date. Date is in a month/day/year

numeric format with 2 digits each for month and day and 4 dig-

its for year. (MM/DD/YYYY) for example: 03/20/1998. You

may change each segment of the date separately. Move

between the segments with the [Tab] key and/or [Shift] + [Tab]

keys.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Menu Field

Options

Default

Description

Primary Master:

Selects Primary

Master submenu

–—

Displays the type of device on this ATA/ATAPI interface, if there

is one. Pressing the Enter key selects the Primary Master

submenu allowing additional device configuration options for

this interface.

Secondary

Master:

Selects

Secondary

Master submenu

–—

Displays the type of device on this ATA/ATAPI interface, if there

is one. Pressing the Enter key selects the Secondary Master

submenu allowing additional device configuration options for

this interface.

Language:

• English (US)

• Japanese (JP)

[English

(US)]

The default setting differs between the US/European and the

Japanese model. Selects the display language for the BIOS.

Download from Www.Somanuals.com. All Manuals Search And Download.

M a i n M e n u

Note: Actual hard drive label shown may vary. Depending

on the drive type, information such as cylinders, heads and

sectors may also be displayed.

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies which ATA

devices are installed.

PhoenixBIOS Setup Utility

Security Power Boot

Main

Advanced

Info

Exit

Item Specific Help

Primary Master [TOSHIBA MK3017GAP-(PM)]

Select ATA/ATAPI drive

installed here.

Type:

Maximum Capacity:

[Auto]

30006MB

[Auto]

The BIOS auto-types the

drive on boot time.

Multi-Sector Transfers:

LBA Mode Control:

PIO Transfer Mode:

DMA Transfer Mode:

[16 Sectors]

[Enabled]

[FAST PIO 4]

[Ultra DMA 4]

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Setup Defaults

Enter

Select

Sub-Menu

F10 Save and Exit

Figure 2. Primary Master Submenu

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

Default

Description

Type:

• Auto

• None

• CD-ROM

• Hard Disk

[Auto]

Selects the ATA/ATAPI device type. Select Auto to have the type

automatically identified by the BIOS at POST. If None is selected,

all of the following Set-up items do not appear. If Hard Disk is

selected, you must specify the number of Cylinders, Heads, and

Sectors for the drive. Select CD-ROM to select parameters for

CD-ROM drive.

Cylinders:

Heads:

• A number

between 0

and 65,535

–—

This item appears only when the type is identified as Hard Disk.

When Hard Disk is selected, you can change the value. This field

is changed by incrementing (pressing the [Spacebar]) or by typing

in the number.

• A number

between 1

and 16

This item appears only when the type is identified as Hard Disk.

When Hard Disk is selected, you can change the value. This field

is changed by incrementing (pressing the [Spacebar]) or by typing

in the number.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

Default

Description

Sectors:

• A number

between 0

and 63

–—

This item appears only when the type is identified as Hard Disk.

When Hard Disk is selected, you can change the value. This field

is changed by incrementing (pressing the [Spacebar]) or by typing

in the number.

Maximum

Capacity:

• Display only

–—

Displays the maximum capacity of the drive calculated from the

parameters of the hard disk when Hard Disk is selected.

Multi-

Sector

Transfers:

• Disabled

[16 Sectors]

This option cannot be changed when Auto is selected. Specify the

number of sectors per block for multiple sector transfer.

• 2 Sectors

• 4 Sectors

• 8 Sectors

• 16 Sectors

• 32 Sectors

• 64 Sectors

• 128 Sectors

LBA Mode

Control:

• Disabled

• Enabled

[Enabled]

Enables or disables logical Block Addressing in place of Cylinder,

Head, Sector addressing. This option cannot be changed when

Auto is selected.

PIO

Transfer

Mode:

• Standard

[Fast PI0 4]

Selects the method for moving data to/from the drive. Autotype

the drive to select the optimum transfer mode. This option cannot

be changed when Auto is selected. Multi-word DMA is automati-

cally set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set

to mode 2 for Fast PIO 4 / DMA.

• Fast PIO 1

• Fast PIO 2

• Fast PIO 3

• Fast PIO 4

DMA

Transfer

Mode:

• Disabled

• Multiword

DMA 1

• Multiword

DMA 2

[Ultra

DMA 4]

Selects the method for moving data to/from the drive. Autotype

the drive to select the optimum transfer mode. This option cannot

be changed when Auto is selected.

• Ultra DMA 0

• Ultra DMA 1

• Ultra DMA 2

• Ultra DMA 3

• Ultra DMA 4

Download from Www.Somanuals.com. All Manuals Search And Download.

M a i n M e n u

Note: Actual drive label shown may vary. Depending on the

drive type, information such as cylinders, heads and sectors

may also be displayed.

Secondary Master Submenu of the Main Menu

The Secondary Master submenu identifies which ATA

devices are installed.

PhoenixBIOS Setup Utility

Security Power Boot

Main

Advanced

Info

Exit

Secondary Master [SONY CD-RW CRX800E-(SM)]

Item Specific Help

Select ATA/ATAPI drive

installed here.

Type:

[Auto]]

Multi-Sector Transfers:

LBA Mode Control:

PIO Transfer Mode:

DMA Transfer Mode:

[Disabled]

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Setup Defaults

Enter

Select

Sub-Menu

F10 Save and Exit

Figure 3. Secondary Master Submenu

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field

Options

Default

Description

Type:

• Auto

• None

• Hard Disk

• CD-ROM

[Auto]

Selects the ATA/ATAPI device type. Select Auto to have the type

automatically identified by the BIOS at POST. If None is selected, all

of the following Set-up items do not appear. If Hard Disk is selected,

you must specify the number of Cylinders, Heads, and Sectors for

the drive. Select CD-ROM to select parameters for CD-ROM drive.

Cylinders:

Heads:

• A number

between 0

and 65,535

–—

This item appears only when the type is identified as Hard Disk.

When Hard Disk is selected, you can change the value. This field is

changed by incrementing (pressing the [Spacebar]) or by typing in

the number.

• A number

between 1

and 16

This item appears only when the type is identified as Auto or Hard

Disk. When Hard Disk is selected, you can change the value. This

field is changed by incrementing (pressing the [Spacebar]) or by

typing in the number.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field

Options

Default

Description

Sectors:

• A number

between 0

and 63

–—

This item appears only when the type is identified as Auto or Hard

Disk. When Hard Disk is selected, you can change the value. This

field is changed by incrementing (pressing the [Spacebar]) or by typ-

ing in the number.

Maximum

Capacity:

• Display only

–—

Displays the maximum capacity of the drive calculated from the

parameters of the hard disk when Hard Disk is selected.

Multi-Sector

Transfers:

• Disabled

[Disabled]

This option cannot be changed when Auto is selected. Specify the

number of sectors per block for multiple sector transfer.

• 2 Sectors

• 4 Sectors

• 8 Sectors

• 16 Sectors

• 32 Sectors

• 64 Sectors

• 128 Sectors

LBA Mode

Control:

• Disabled

• Enabled

[Disabled]

Enables or disables logical Block Addressing in place of Cylinder,

Head, Sector addressing. This option cannot be changed when Auto

is selected.

PIO Transfer

Mode:

• Standard

Selects the method for moving data to/from the drive. Autotype the

drive to select the optimum transfer mode. This option cannot be

changed when Auto is selected. Multi-word DMA is automatically

set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to

mode 2 for Fast PIO 4 / DMA.

• Fast PIO 1

• Fast PIO 2

• Fast PIO 3

• Fast PIO 4

DMA

Transfer

Mode:

• Disabled

• Multiword

DMA 1

• Multiword

DMA 2

[Disabled]

Selects the method for moving data to/from the drive. Autotype the

drive to select the optimum transfer mode. This option cannot be

changed when Auto is selected.

• Ultra DMA 0

• Ultra DMA 1

• Ultra DMA 2

• Ultra DMA 3

• Ultra DMA 4

Exiting from Main Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to

another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu.

If you wish to move to another menu, use the cursor keys.

Download from Www.Somanuals.com. All Manuals Search And Download.

A d v a n c e d M e n u

ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS

The Advanced Menu allows you to:

Follow the instructions for Navigating Through the

Setup Utility to make any changes.

• Enable or disable support for Plug & Play

operating systems.

• Select between the display panel and an external

CRT display.

• Enable or disable compensation for your display.

• Configure PCI devices in your system.

• Configure CPU and USB features.

The following tables show the names of the menu fields

for the Advanced Menu and its submenus, all of the

options for each field, the default settings and a descrip-

tion of the field’s function and any special information

needed to help understand the field’s use.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power

Boot

Info

Exit

Item Specific Help

Plug & Play O/S:

[No]

Keyboard/Mouse Features

Video Features

The BIOS configures

also non-boot devices.

Select if you are using

a non-Plug & Play OS or

a non-ACPI OS.

Internal Device Configurations

PCI Configurations

CPU Features

USB Features

[Yes]

Event Logging

The BIOS configures

only boot devices.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 4. Advanced Menu

Table 4: Fields, Options and Defaults for the Advanced Menu

Menu Field

Options

Default

Description

Plug & Play O/S:

• No

• Yes

[No]

Select Yes if you are using a Plug & Play capable operating system.

Select No if you need the BIOS to configure non-boot devices.

Keyboard/

Mouse Features

–—

When selected, opens the Keyboard/Mouse Features submenu, which

allows setting NumLock and Internal Pointing Device parameters.

Video Features

When selected, opens the Video Features submenu, which allows setting

of the display parameters, including routing of video signals to different

displays.

Internal Device

Configurations

–—

When selected, opens the Internal Device Configurations submenu, which

allows enabling or disabling the IDE and LAN Controllers.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Table 4: Fields, Options and Defaults for the Advanced Menu

Menu Field

Options

Default

Description

PCI Configura-

tions

–—

When selected, allows you to open the IRQ Reservation window to desig-

nate specific IRQs for use by legacy ISA devices.

CPU Features

–—

Configures Processor Serial Number features of processor. LifeBook note-

books with Intel SpeedStep software pre-installed provide the user the

ability to set the processor performance.

CPU Features

USB Features

Event Logging

–—

When selected, opens the CPU Features submenu, which allows enabling

or disabling of Processor Serial Number feature.

When selected, opens the USB Features submenu, which allows enabling

or disabling USB.

When selected, opens the event logging submenu which lets you view and

enable the event log.

Download from Www.Somanuals.com. All Manuals Search And Download.

A d v a n c e d M e n u

Keyboard/Mouse Features Submenu of the Advanced Menu

The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and

keyboard.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Exit

Keyboard/Mouse Features

Item Specific Help

Select power-on state

for Numlock.

Numlock:

Internal Pointing Device:

[Auto]

[Manual Setting]

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select

F9 Setup Defaults

F10 Save and Exit

Sub-Menu

Figure 5. Keyboard/Mouse Features Submenu

Table 5: Fields, Options and Defaults for the Keyboard/Mouse Features Submenu of the Advanced Menu

Menu Field

Options

Default

Description

Numlock:

• Auto

• On

[Auto]

Sets the NumLock function state when the computer

completes booting.

• Off

Internal

Pointing Device:

• Manual

[Manual

Setting]

Configures the internal pointing device. When Manual

Setting is selected, the internal pointing device can be

enabled or disabled by using the [Fn] + [F4] keys. When

Always Enabled is selected, the internal device is always

selected. When Always Disabled is selected, the internal

pointing device cannot be used.

Setting

• Always

Enabled

• Always

Disabled

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Video Features Submenu of the Advanced Menu

The Video Features Submenu is for setting the display parameters.

PhoenixBIOS Setup Utility

Security Power Savings Exit

Main

Advanced

Video Features

[Internal Flat Panel]

Item Specific Help

Display

Compensation: [Enabled]

Select display terminal.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select

F9 Setup Defaults

F10 Save and Exit

Sub-Menu

Figure 6. Video Features Submenu

Table 6: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu

Menu Field

Options

Default

Description

Display:

• Internal

[Internal

Flat-Panel]

Selects where the video signal will be routed.

Flat-Panel

• External

• Simultaneous

Compensation:

• Disabled

• Enabled

[Enabled]

Enables or disables compensation which controls spacing

on the display. When enabled, displays with less than pixel

resolution 800 x 600 will still cover the entire screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

A d v a n c e d M e n u

Internal Device Configurations Submenu of the Advanced Menu

The Internal Device Configurations submenu allows the user to configure other internal devices.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Exit

Internal Device Configurations

Item Specific Help

IDE Controller:

LAN Controller:

[Both]

[Auto]

[Disabled]

No IDE ports

are enabled.

[Primary]

Only primary IDE

port is enabled.

[Both]

Both primary and

secondary ports are

enabled.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 7. Internal Device Configurations Submenu

Table 7: Fields, Options and Defaults for the Internal Device Configurations Submenu of Advanced Menu

Menu Field

Options

Default

Description

IDE Controller:

• Disabled

• Primary

• Both

[Both]

Enables or disables selected IDE devices.

LAN Controller:

• Disabled

• Enabled

• Auto

[Auto]

Enables or disables LAN controller.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

PCI Configurations Submenu of the Advanced Menu

The PCI Configurations submenu allows the user to reserve specific interrupts (IRQs) for legacy ISA devices, and to

enable or disable built in PCI device modules.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Exit

PCI Configurations

IRQ Reservation

Item Specific Help

Reserve specific IRQs

for use by legacy ISA

devices.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

F9 Setup Defaults

F10 Save and Exit

Enter Select

Sub-Menu

Figure 8. PCI Configurations Submenu

Table 8: Fields, Options and Defaults for the PCI Configurations Submenu of the Advanced Menu

Menu Field

Options

Default

Description

IRQ Reservation

–—

Reserve specific IRQs for use by legacy ISA devices.

Download from Www.Somanuals.com. All Manuals Search And Download.

A d v a n c e d M e n u

IRQ Reservation Submenu of the PCI Configurations Submenu

The IRQ Reservation submenu of the PCI Configurations submenu allows the user to mark various IRQs as reserved for

use by legacy ISA devices. When an IRQ is reserved, the BIOS does not use it for embedded PCI or ISA devices.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Exit

IRQ Reservation

Item Specific Help

IRQ 3:

IRQ 4:

IRQ 5:

IRQ 7:

IRQ 9:

IRQ 10:

IRQ 11:

[Available]

Reserve the specified

IRQ for use by legacy

ISA devices.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

F9 Setup Defaults

F10 Save and Exit

Enter Select

Sub-Menu

Figure 9. IRQ Reservation Submenu

Table 9: Fields, Options and Defaults for the IRQ Reservation Submenu of the PCI Configurations Submenu

Menu Field

Options

Default

Description

IRQ 3:

• Available

• Reserved

[Available]

Reserves IRQ 3. If Reserved is selected, BIOS reserves IRQ 3 for use by

legacy ISA devices and does not use it for embedded PCI/ISA devices.

IRQ 3 is removed from the IRQ bitmap in the PCI IRQ routing table.

IRQ 4:

IRQ 5:

IRQ 7:

IRQ 9:

IRQ 10:

IRQ 11:

• Available

• Reserved

[Available]

Reserves IRQ 4.

Reserves IRQ 5.

Reserves IRQ 7.

Reserves IRQ 9.

Reserves IRQ 10.

Reserves IRQ 11.

• Available

• Reserved

• Available

• Reserved

• Available

• Reserved

• Available

• Reserved

• Available

• Reserved

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

CPU Features Submenu of the Advanced Menu

The CPU Features submenu configures certain features of the CPU in the system.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

[Disabled]

Exit

CPU Features

Item Specific Help

Processor Serial Number:

Configures Processor

Serial Number feature.

[Disabled]

Processor Serial Number

feature is disabled.

[Enabled]

Processor Serial Number

feature is enabled.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

F9 Setup Defaults

F10 Save and Exit

Enter Select

Sub-Menu

Figure 10. CPU Features Submenu

Table 10: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu

Menu Field

Options

Default

Description

Processor Serial

Number:

• Enabled

• Disabled

[Disabled]

Enables or disables the Processor Serial Number feature of

the processor.

Download from Www.Somanuals.com. All Manuals Search And Download.

A d v a n c e d M e n u

USB Features Submenu of the Advanced Menu

The USB Features submenu configures the USB capabilities of the system.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Exit

USB Features

Item Specific Help

USB Floppy Disk:

[Enabled]

[Disabled]

Legacy Floppy Emulation

is disabled.

[Enabled]

Legacy Floppy Emulation

is enabled and USB

floppy is available

without USB aware OS.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select

F9 Setup Defaults

F10 Save and Exit

Sub-Menu

Figure 11. USB Features Submenu

Table 11: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu

Menu Field

Options

Default

Description

USB Floppy

Disk:

• Disabled

• Enabled

[Enabled]

When enabled, Legacy Floppy Emulation is enabled.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Event Logging Submenu of the Advanced Menu

The Event Logging submenu is for setting up the logs for DMI event logging.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Exit

Event Logging

Item Specific Help

Event Log Capacity:

Event Log Validity:

Space Available

Valid

Press <Enter> key to

view the contents of

the event log.

View Event Log:

[Enter]

Event Logging:

[Enabled]

System Boot Event:

[Disabled]

Clear All Event Logs:

Mark Events as Read:

[No]

[Enter]

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select

F9 Setup Defaults

F10 Save and Exit

Sub-Menu

Figure 12. Event Logging Submenu

Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu

Menu Field

Options

Default

Description

Event Log Capacity:

Space

Display only

Available

Event Log Validity:

View Event Log:

Event Logging:

Valid

Display only

• Enter

[Enter]

[Enabled]

Allows you to view content of event log.

Turns event logging on and off for all DMI events.

• Disabled

• Enabled

System Boot Event:

Clear All Event Logs:

Mark Events as Read:

• Disabled

• Enabled

[Disabled]

[No]

Turns event logging on and off for DMI system boot events.

When set to [Yes] all event logs will be cleared at next boot.

Allows you to mark events currently in the event log as read.

• No

• Yes

• Enter

[Enter]

Download from Www.Somanuals.com. All Manuals Search And Download.

S e c u r i t y M e n u

SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security

features of your notebook to fit your operating needs and

to view the current data security configuration. Follow

the instructions for Navigating Through the Setup Utility

to make any changes.

P O I N T S

• If you make an error when re-entering the password

a [Warning] will be displayed on the screen. To try

again, press the Enter key and then retype the pass-

word. Press the Esc key to abort the password setting

process.

• Entering a password incorrectly three times in a row

will cause the keyboard and mouse to be locked out

and the warning [System Disabled] to be displayed. If

this happens, restart the computer by turning off and

on the power with the power switch and use the

correct password on reboot.

The following tables show the names of the menu fields

for the Security menu and its submenus, all the options

for each field, the default settings and a description of the

field's function and any special information needed to

help understand the field's use. The default condition is

no passwords required and no write protection.

• If the Password on Resume is Enabled and the Pass-

word on Boot is Disabled you will not have to type

your password upon resuming the system from the

Suspend or Save-to-Disk modes. Power Management

Security will work only if Password on Boot is

enabled.

P O I N T

If you set a password, write it down and keep it in a

safe place. If you forget the password you will have to

contact your support representative to regain access to

your secured functions and data.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power

Boot

Info

Exit

Item Specific Help

Supervisor Password Is:

User Password Is:

Clear

Press <Enter> key to

set Supervisor password

to enable any password

features.

Set Supervisor Password

Set User Password

Minimum User Password Length

[Enter]

[0]

Then password entry is

required to enter BIOS

Setup.

Password on Boot:

[Disabled]

[All]

Password on Resume:

Boot from Removable Media:

Floppy Disk Access:

Hard Disk Security

Owner Information

[All]

Hard Disk Boot Sector:

[Normal]

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 13. Security Menu

Table 13: Fields, Options and Defaults for the Security Menu

Menu Field

Options

Default

Description

Supervisor

Password is:

–—

Clear

A display-only field. Set is displayed when the system supervisor

password is set and Clear when it is not.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Table 13: Fields, Options and Defaults for the Security Menu

Menu Field

Options

Default

Description

User Password is:

–—

Clear

A display-only field. Set is displayed when the general user pass-

word is set, and Clear when it is not.

Set Supervisor

Password

–—

[Enter]

Sets, changes or cancels the Supervisor Password. The Supervi-

sor Password may be up to seven characters long and must

include only letters or numbers (no symbols). Passwords are

NOT case-sensitive. To cancel a password press the Enter key

instead of entering characters in the Enter New Password field

and in the Re-enter New Password field. When a Supervisor

Password is set it must be used to access the BIOS setup utility.

Set User Password

Can only be accessed if Supervisor Password is set. Sets, changes

or cancels User Password. User Password may be up to seven

characters long and must include only letters or numbers (no

symbols). Passwords are NOT case-sensitive. To cancel a pass-

word press the Enter key instead of entering characters in the

Enter New Password and Re-enter New Password fields. When a

User Password is set it must be used to access the BIOS utility.

Minimum User

[0]

–—

Password Length:

Password on Boot:

• Disabled

• First Boot

• Every Boot

[Disabled]

When set to Disabled, no password is required. When set to First

Boot, password entry required only before first boot. When

Every Boot is selected, password required whenever the system

is booted.

Password On

Resume:

• Disabled

• Enabled

[Disabled]

[All]

When Enabled, PS/2 keyboard or mouse inputs are locked out at

Resume From Suspend or Save-to-Disk until entering password.

Boot from

Removable Media:

• All

• Supervisor

only

When Supervisor Only is selected, only the Supervisor can boot

from removable media. Only the user who enters the Supervisor

Password before OS boot is treated as the Supervisor. When All

is selected, boot from removable media is not restricted.

Floppy Disk Access:

• All

• Supervisor

only

[All]

When Supervisor Only is selected, only the Supervisor can

access the floppy disk. Only the user who enters the Supervisor

Password before OS boot is treated as the Supervisor. When All

is selected, floppy disk access is not restricted.

Hard Disk Security:

Owner Information:

–—

Configures hard disk security features.

Sets Owner information.

–—

Hard Disk

• Normal

[Normal]

Sets protection mode for hard disk drive.

Boot Sector:

• Write

Protected

Exiting from the Security Menu

When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to

another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to

another menu, use the cursor keys.

Download from Www.Somanuals.com. All Manuals Search And Download.

S e c u r i t y M e n u

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard disk security features.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Exit

Hard Disk Security

Item Specific Help

Primary Master:

[Disabled]

Secondary Master:

[Disabled]

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 14. Hard Disk Security Submenu

Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Menu Field

Options

Default

Description

Primary Master:

• Disabled

• Enabled

[Disabled]

Disabled: No password protection.

Enabled: Hard drive is locked with the password. Data in

the locked disk cannot be read on any systems other than

the original system on which it was locked, or on systems

that have the identical password setting.

Secondary

Master:

• Disabled

• Enabled

[Disabled]

Disabled: No password protection.

Enabled: Secondary Master device is locked with the pass-

word. Data in the device cannot be read on any systems

other than the original system on which it was locked, or

on systems that have the identical password setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Owner Information Submenu of the Security Menu

The Owner Information submenu is for setting owner information.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power

Boot

Info

Exit

Item Specific Help

Owner Information Is:

Set Owner Information

Clear

[Enter]

Foreground Color:

Background Color:

[Gray]

[Black]

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 15. Owner Information Submenu

Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu

Menu Field

Options

Default

Description

Owner Information

Is:

–—

Clear

Display only.

Set Owner

Information:

–—

[Enter]

[Gray]

Field to write owner

information, i.e. name.

Foreground Color:

• Black

• Blue

• Green

• Cyan

• Red

• Brown

• White

• Gray

• Light Blue

• Light

Green

• Light Cyan

• Light Red

• Light

Magenta

• Light Yellow

• Bright White

• Magenta

Background Color:

• Black

• Blue

• Green

• Cyan

• Red

• Brown

• White

• Gray

• Light Blue

• Light

Green

• Light Cyan

• Light Red

• Light

Magenta

• Light Yellow

• Bright White

[Black]

• Magenta

Download from Www.Somanuals.com. All Manuals Search And Download.

P o w e r M e n u

POWER MENU – SETTING POWER MANAGEMENT FEATURES

The Power menu allows you to set and change the power management parameters. Follow the instructions for Navi-

gating Through the Setup Utility to make any changes. The tables show the names of the menu fields for the Power

menu and its submenus, the options for each field, the default settings and a description of the field's function and any

special information needed to help understand the field's use.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power

Boot

Info

Exit

Item Specific Help

Power Savings:

[Customized]

[Off]

[4 Minutes]

[15 Minutes]

Hard Disk Timeout:

Display Timeout:

Standby Timeout:

Auto Suspend Timeout:

Select Power Management

Mode. Choosing modes

changes system power

management settings.

Maximum Power Savings

conserves the greatest

amount of system power

while Maximum

Suspend Mode:

Auto Save To Disk:

[Suspend]

[Off]

Resume On Modem Ring:

Resume On Time:

Resume Time:

[Off]

[00:00:00]

Performance conserves

power but allows

greatest system

performance. To alter

these setting, choose

Customize. To turn off

power management,

Advanced Features

choose Disabled.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 16. Power Menu

Table 16: Fields, Options and Defaults for the Power Menu

Menu field

Options

Default

Description

Power

Savings:

• Disabled

• Customized

• Maximum

Power Savings

[Customized]

Sets the power savings parameters to a factory installed

combination of parameters, a custom set of parameters set by you

or no power saving features.

• Maximum

Performance

Hard Disk

Timeout:

• Off

• 30 seconds to

20 Minutes

[Off]

Sets the length of time the hard drive can be inactive before the

system automatically turns off power to the hard drive controller

and drive motor. If you choose factory installed parameters, this

field will display the setting. If you choose to customize the param-

eters you will be able to set this yourself. The options available vary

from Off, which has no inactivity shutoff, to 20 minutes.

Display

Timeout:

• Off

• 2 to 20

Minutes

Sets the length of time without user input activity before the dis-

play is turned off. If you choose factory parameters, this field will

display the setting. If you choose to customize the parameters, you

will be able to set this yourself. Off has no inactivity shutoff.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Table 16: Fields, Options and Defaults for the Power Menu

Menu field

Options

Default

Description

Standby

Timeout:

• Off

• 1 to 16

Minutes

[4 Minutes]

Sets the length of time without any user input device activity

before the CPU is set to half speed and the display and the hard

drive are turned off. If you choose a factory combination of param-

eters this field will display the setting. If you choose to customize

the parameters you will be able to set it yourself.

Auto

Suspend

Timeout:

• Off

• 5 to 60

minutes

[15 Minutes]

[Suspend]

Sets the length of time without any I/O activity before your note-

book goes into Suspend mode. If you choose a factory combina-

tion of parameters this field will display that setting. If you choose

to customize the parameters you will be able to set this yourself.

Off has no inactivity suspension.

Suspend

Mode:

• Suspend

• Save to Disk

Sets the form of suspension state. If you choose Suspend, you will

suspend operation with power to system memory, and everything

else powered down or in a very low power state. If you choose

Save-to-Disk your notebook will save all of system memory and

the operating parameters to the hard drive before turning your

notebook to the pseudo-off condition.

Auto Save

to Disk:

• Off

• After 1 Hour

[Off]

When set to “After 1 Hour”, your notebook will

automatically save all system memory and the operating

parameters to the hard drive and go to pseudo-off if the notebook

is left in Suspend mode for more than an hour.

Resume

Modem

Ring:

• Off

• On

Sets whether or not to Resume from a suspension state when a

message is received by telephone line. This feature will not operate

if the Save-to-Disk mode is enabled. This feature applies to internal

and external modems.

Resume

On Time:

• Off

• On

[Off]

Sets whether or not to resume from a suspension state at a

designated time. This feature is available from either the Suspend

or Save-to-Disk modes.

Resume

Time:

–—

[00:00:00]

Sets the designated time, on a 24-hour clock, when the notebook

is to automatically resume operation from the Suspend state. The

format of the clock setting is hours:minutes:seconds. Each segment

of the time is set separately, either by incrementing or by typing in

the numbers. You move between the segments with the [Tab] key

or the [Shift]+[Tab] keys. This only applies when Resume on Time is

set to On.

Advanced

Features:

–—

When selected, opens the Advanced Features submenu which

allows setting additional power saving parameters.

Download from Www.Somanuals.com. All Manuals Search And Download.

P o w e r M e n u

Factory Installed Values for Power Saving Profiles

Hard Disk

Timeout

Video

Timeout

Standby

Timeout

Auto Suspend

Timeout

Customized:

Off

4 Minutes

1 Minute

Off

15 Minutes

5 Minutes

15 Minutes

Off

Maximum Power Savings:

Maximum Performance:

Disabled:

30 Seconds

Off

2 Minutes

Off

Sample Customized Profile: (To get even better

battery life keep the display and volume settings as

low as possible and use the sample customized

profile.)

2 Minutes

1 Minute

5 Minutes

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Advanced Features Submenu of the Power Menu

The Advanced Features submenu is for setting some non-time related power saving parameters.

PhoenixBIOS Setup Utility

Power

Advanced Features

Item Specific Help

Suspend/Resume Switch:

[Enabled]

Configures the

Lid Closure Suspend:

Lid Open Resume:

Resume on LAN:

[On]

[Off]

Suspend/Resume switch.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 17. Advanced Features Submenu

Table 17: Fields, Options and Defaults for the Advanced Features Submenu of the Power Menu

Menu Field

Options

Default

Description

Suspend/

Resume Switch:

• Disabled

• Enabled

[Enabled]

Sets the function of the Suspend/Resume button when your note-

book is in an active state. The resume function can not be disabled

as it works regardless of any other settings.

Lid Closure

Suspend:

• Off

• On

[On]

[Off]

Enables and disables having closure of the Display panel put your

notebook in Suspend mode.

Lid Open

Resume:

• Off

• On

Enables and disables having opening the Display panel acting as an

automatic resume.

Resume On

LAN:

• Off

• On

When this feature is set to On, the system will wake when the inter-

nal LAN device receives a Magic Packet while in Suspend Mode.

Exiting from Power Menu

When you have finished setting the boot parameters with the Power menu, you can either exit from the setup utility or

move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish to

move to another menu, use the cursor keys.

Download from Www.Somanuals.com. All Manuals Search And Download.

B o o t M e n u

BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE

The Boot Menu is used to select the order in which the BIOS searches sources for the operating system. Follow the

instructions for Navigating Through the Setup Utility to make any changes. The tables show the names of the menu

fields for the Boot menu and its submenu, all of the options for each field, the default settings and a description of the

field's function and any special information needed to help understand the field's use.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Boot

Item Specific Help

Quick Boot:

[Enabled]

Boot Time Diagnostic Screen:

[Disabled]

All diagnostic tests

will be done.

Preboot Execution Environment

Boot Device Priority

[Disabled]

[Enabled]

Some diagnostic tests

may be skipped while

booting to speed up.

[Auto]

Diagnostic tests will

be automatically

skipped or done

according to the order

of the ACPI OS.

F1 Help

ESC Exit

Select Item -/Space Change Values

Select Menu

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 18. Boot Menu

Table 18: Fields, Options and Defaults for the Boot Menu

Menu Field

Options

Default

Description

QuickBoot

Mode:

• Disabled

• Enabled

• Auto

[Enabled]

Turns on and off booting with a truncated set of Power On Self

Test. (Fewer tests mean faster turn on.)

Boot-time

Diagnostic

Screen:

• Disabled

• Enabled

[Disabled]

—

Turns on and off display of test results instead of Fujitsu logo

screen during Power On Self Test.

Preboot

Execution

Environment

• Disabled

• Enabled

Turns off and on the preboot execution environment feature.

Boot Device

Priority

• Selects Boot

Device Priority

submenu

This menu allows setting up the source for the operating

system.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Boot Device Priority Submenu of the Boot Menu

The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Boot

Boot Device Priority

Item Specific Help

The top device has the

highest priority.

Floppy Disk Drive

+Hard Disk Drive

ATAPI CD-ROM Drive

<Enter> expands or

collapses devices with

a + or -.

<Ctrl+Enter> expands

all.

< > or < > selects a

device.

<+>/<Space> or <->

moves the device up or

down.

<Shift + 1> enables or

disables a device.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

F9 Setup Defaults

F10 Save and Exit

Enter Select

Sub-Menu

Figure 19. Boot Device Priority Submenu

Table 19: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu

Menu Field

Options

Description

Floppy Disk

Drive

–—

The boot selections determine the order in which the BIOS

searches for the operating system during a startup sequence. To

change the order highlight one source by using the [up] or

[down] cursor keys and then press the [+] or [-] key to change

the order number for that source. Be sure to save your changed

order when you exit the BIOS setup utility.

Hard Disk Drive

• TOSHIBA

MHK3017GAP-(PM)

• Bootable Add-in Cards

ATAPI CD-ROM

Drive

–—

Exiting from Boot Menu

When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or

move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish to

move to another menu, use the cursor keys.

Download from Www.Somanuals.com. All Manuals Search And Download.

I n f o M e n u

INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION

The Info menu is a display-only screen that provides the

configuration information for your notebook.

P O I N T

The information displayed on this screen is variable

according to the unit you purchased.

The following table shows the names of the menu fields

for the Info menu and the information displayed in those

fields. These fields are for information purposes only, and

are not editable.

PhoenixBIOS Setup Utility

Security Power Savings

Main

Advanced

Boot

Info

Item Specific Help

BIOS Version:

BIOS Date:

1.03

04/15/2002

BIOS Area:

E400h - FFFFh

CPU Type:

CPU Speed:

L1 Cache:

L2 Cache:

Transmeta TM5800 processor

867 MHz

128 KB

512 KB

Total Memory:

240 MB

CMS Mode:

CMS Revision:

OEM ID:

Normal

4.3.0-9-197

FJCFG-0104020100

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 20. Info Menu

Table 20: Fields, Options and Defaults for the Info Menu

Menu Field

BIOS Version:

BIOS Date:

BIOS Area:

CPU Type:

CPU Speed:

L1 Cache:

Default

Menu Field

Total Memory:

CMS Mode:

CMS Revision:

OEM ID:

Default

1.xx

*240 MB

mm/dd/yyyy

E400h – FFFFh

Normal

4.3.0-9-197

FJCFG-0104020100

Transmeta TM5800 processor

867 MHz

128 KB

* Note that Transmeta CPU uses 16MB of RAM for Code

Morphing Software (CMS). As a result, the amount reflected here

reflects memory less the 16MB used by CMS. For more

information on CMS, refer to the Transmeta web site at:

www.transmeta.com

L2 Cache:

512 KB

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

EXIT MENU – LEAVING THE SETUP UTILITY

The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through The Setup Utility to

make any changes. The table shows the names of the menu fields for the Exit menu and a description of the field's func-

tion and any special information needed to help understand the field's use.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Boot

Exit

Item Specific Help

Exit Saving Changes

Exit Discarding Changes

Load Setup Defaults

Discard Changes

Exit System Setup and

save your changes to

CMOS.

Save Changes

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

F9 Setup Defaults

F10 Save and Exit

Enter Select

Sub-Menu

Figure 21. Exit Menu

Table 21: Fields, Options and Defaults for the Exit Menu

Menu Field

Shortcut

Description

Exit Saving

Changes

Press the

F10 key

Exit Saving Changes and Exit will store all the entries on every menu of the setup utility

to the BIOS memory and then exit the setup utility. A confirmation message Save

Configuration changes and exit now? [Yes] [No] will be displayed.

Exit

Discarding

Changes

–—

Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to

the BIOS memory. When the BIOS recognizes this selection it will load the operating

system and begin operation.

Load Setup

Defaults

Press the

F9 key

Selecting Load Setup Defaults will load the factory preset default values for all menu

fields, then display the message Load default configuration now? [Yes]

[No]. When confirmed the setup utility will return to the Exit Menu. To return to

another menu follow the directions in the Navigating Through The Setup Utility section.

Download from Www.Somanuals.com. All Manuals Search And Download.

E x i t M e n u

Table 21: Fields, Options and Defaults for the Exit Menu

Menu Field

Shortcut

Description

Discard

Changes

–—

Selecting Discard Changes will load the previous values in BIOS memory for all menu

fields. The message Load previous now? [Yes] [No] will be displayed. When

confirmed the setup utility will return to the Exit menu. To return to another menu, fol-

low the directions in the Navigating Through The Setup Utility section.

Save

Changes

–—

Selecting Save Changes will cause the new settings in all menus to be written to the

BIOS memory. The message Save configuration changes now? [Yes]

[No] will be displayed. When confirmed, the setup utility will return to the Exit menu.

To return to another menu, follow the directions in the Navigating Through The Setup Util-

ity section.

Download from Www.Somanuals.com. All Manuals Search And Download.

EchoStar Satellite TV System MT2 User Manual
Edirol Portable Speaker MA 5A User Manual
Eiki Projection Television EIP 3500 User Manual
Electro Voice Speaker System MTL 2 User Manual
Everpure Water System EV3112 81 User Manual
Fujitsu Power Supply MB39A104 User Manual
GE Camcorder PNRQ20F User Manual
Geemarc Telephone Jupiter 10 User Manual
GE Gas Grill ZGG300LCPSS User Manual
GE Refrigerator 162D3907P004 User Manual