23-69
Owner’s Manual
CERTIFIED PHOTOFINISHING SERVICE
● Have your film processed by a Photo Finisher which displays the above sign.
● Different Photo Finishers may provide different services.
Consult them for details of their services.
The “CE” mark certifies that this product satisfies the require-
ments of the EU (European Union) regarding safety, public
health, environment and consumer protection. (“CE” is the
abbreviation of Conformite Euroeepnne.)
This product conforms with Directive 89/336/EEC.
Download from Www.Somanuals.com. All Manuals Search And Download.
(Refer to the illustrations while you read this manual)
PART NAMES
q
!
!
!
!
@
@
@
@
@
@
w
e
r
t
!
@
@
!
!
#
#
y
@
@
!
!
#
u
i
o
!
Liquid Crystal Display
q AE Window
w Flash
e Viewfinder Window
@ Date Display (Type of Film Cartridge/Camera ISO
Display)
@ Liquid Crystal Display (LCD)
r AF (Auto focus) Light Emitter Window
t Red-eye Reduction/Self-timer Lamp
y Fujinon Lens
u AF (Auto focus) Light Sensor Window
! Viewfinder Eye-piece
! AF Lamp (green)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ATTACHING THE STRAP
Attach the strap as illustrated.
✻ When using a commercial strap, check the
Fig. 1
strength and other properties of the strap.
Because straps for cellular telephones, PHS, etc.
are for light devices, be especially careful when
using them.
LOADING THE BATTERY
Lithium battery to be used: CR123A/DL 123A or
equivalent (one)
Fig. 2
Open the Battery Compartment and insert (one) 3V
Lithium battery.
✻ Be sure to reset the date when replacing battery.
✻ Do not load the cartridge before inserting the bat-
tery.
✻ One lithium battery has enough power for taking
approximately 300 shots (Based on our test condi-
tions). If multiple rolls of film are being used such
as for vacation or traveling where batteries may
be difficult to obtain, it is advisable to carry a
spare.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
✻ When inserting battery, lens may move if camera
is in the on position. This is a normal occurrence,
not a problem.
Once the power is on, you can check the battery
capacity display on the LCD.
Fig. 3
q on : Battery capacity is insufficient; provide a
new battery.
w blink: Shutter release will not trip because the
battery has no charge; change the battery.
q
w
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE DATE
(YEAR : MONTH : DAY/HOUR : MINUTE)
q Press the DATE Button for more than 2 seconds, until the year number blinks.
Fig. 4
w Press the SET Button and adjust the numbers that blink.
e Press the SEL. Button to select the position of the blinking sign year → month → day →
hour → minute order, and adjust each figure using the SET Button.
Adjustable items are as follows.
Year : ’99 - ’30 (1999 - 2030)
Month : 1 - 12
Hour : 0 - 23
Day
: 1 - 31
Minute : 00 - 59
r After adjusting the year → month → day → hour → minute, press the DATE Button.
✻ The year, month, and day change together with the hour and minute.
✻ To set the hour or minute by radio, press the DATE Button when the time signal announces
zero.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE DATE MODE
Fig. 5
With the Advanced Photo System
The date (year:month:day / hour:minute) can be
printed on the front and back of the print. Front
printing can be seen when inserted in an album and
back printing is convenient for cataloging.
✻ Changes, such as eliminating the date, are possi-
ble when reprinting (Some photo-finishers may
not support this feature).
✻ With some backgrounds, the date display on the
front may be difficult to see.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
A
E
B
C
D
Each time the DATE Button is pressed, the date for-
mat changes in sequence.
Fig. 6
A Year-Month-Day
B Month-Day-Year
C Day-Month-Year
D Hour-Minute
E No print
The indicated mode is recorded when the picture is
taken, and printed on the front and back of the print
when printed.
✻ Some Print Service shops may not support Front
printing.
✻ Nothing will be printed on the print when the “- - -”
mark is displayed.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TURNING THE POWER ON/OFF
When the slide cover is opened by sliding it fully in
Fig. 7
the arrow direction, the power is turned on, the flash
lamp pops up, the lens advances, and the camera
enters the "Ready-to-Shoot" state. When the slide
cover is closed, the power is turned off.
✻ When turning on the power, do not press the lens
with your finger. The camera may malfunction.
✻ If the camera is not operated in the “Shoot” state
for 5 minutes, the power is automatically turned
off. If the slide cover is closed, then reopened in
this state, the camera will be set to the “Ready-to-
Shoot” state.
✻ When the power is turned off, all functions are
canceled except Red-eye reduction modes.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING THE FILM CARTRIDGE
Fig. 8
With the Advanced Photo System
1
2
3
IX240 Cartridge film is used.
✻ Do not load the cartridge before inserting the bat-
tery.
✻ Confirm that the i and j signs on the film car-
tridge are white. Cartridges in which the k and
l signs are white cannot be used. (Optical
Double Exposure Prevention.)
4
(1 unexposed 2 partial 3 exposed 4 processed)
After closing the slide cover, (q)move the Film
Fig. 9
Cartridge Compartment Cover Release Knob in the
arrow direction, open the Film Cartridge
Compartment Cover.
q
10
Download from Www.Somanuals.com. All Manuals Search And Download.
(w) Turn the camera over and drop in the film car-
tridge.
Fig. 10
e
(e) Close the Film Cartridge Compartment Cover.
✻ Do not apply unnecessary force to the Film
Cartridge Compartment Cover.
w
When the Film Cartridge Compartment Cover is
closed, the film is automatically advanced and “H”
is displayed on the LCD. While the film is being
advanced to the first frame, the film type and speed
are displayed.
Fig. 11
A
B
(A: Type of Film Cartridge)
(B: Film speed)
Type of Film Cartridge
Color Negative Positive Black and White Other
No display
m
n
o
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE PRINT FORMAT
Fig. 12
With the Advanced Photo System
The style of print required can be selected from
amongst C, H and P. Use the Format Selector to
select the required print style.
✻ The print format can also be changed when mak-
ing reprints, however the field of view remains the
same.
A C Print (2:3)
B H Print (9:16)
Fig. 13
C P Print (1:3)
( ) represents the aspect ratio.
( A : Parallax correction mark)
A
A
B
C
12
Download from Www.Somanuals.com. All Manuals Search And Download.
A: Viewfinder
Fig. 14
B: Print finishing
●
With taking close-up picture
When pictures are taken at distances closer than
A
about 1.5m, the information within the
shown above is not printed.
range
✻ When taking close ups, the area seen through the
viewfinder and the area actually photographed
will be different. (Because the viewfinder and the
lens are in different locations.) The parallax cor-
rection mark is the criteria for the difference
between the area seen through the viewfinder
and the area actually photographed.
A
B
( A : Parallax correction mark)
No matter what print format of the C/H/P was select-
ed, the size of the photograph on the film may be
the same(16.7 x 30.2mm). Depending on the print
format selected during printing, the image (image of
size in table) photographed within the area above
may be printed.
Fig. 15
H&P
C
H&C
P
C
H
P
about 16 x 23 mm about 16 x 28 mm about 10 x 28 mm
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TAKING PICTURES
Hold the camera firmly with both hands.
Fig. 16
When holding vertically, keep the flash lamp upward.
✻ Be careful not to block the camera lens, flash and
AE and AF Windows with your finger or strap.
The subject will not be focused correctly.
If you want to increase the size of the subject, slide
the zoom lever to the right s for a telephoto shot. If
you want a wider field of view, slide the zoom lever
to the left t for a wide-angle shot.
Fig. 17
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Aim at the subject so that it fills the whole AF frame.
( A : AF (Autofocus) frame)
Fig. 18
A
When the shutter release button is pressed halfway
and the AF lamp (green) turns on, focusing is com-
plete. When the shutter trips, the flash fires and the
film advances to the next frame.
Fig. 19
✻ While the shutter release button is pressed
halfway, the film speed and type of film is indicat-
ed in the LCD.
✻ When the camera is brought within about 1m of
the subject, the AF lamp will blink to warn you that
the subject is not focused. If the camera is
brought about 30cm closer to the subject, the sub-
ject cannot be focused even if the AF lamp may
light.
✻ During the charging time of the flash, the shutter
cannot be released.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
●
In dark places, photos should be taken within the follow-
ing flash lamp ranges.
Effective Flash Lamp Ranges
Film speed Wide angle (23mm) Telephoto (69mm)
ISO 100
ISO 200
ISO 400
1.0 - 2.5
1.0 - 3.5
1.0 - 5.0
1.0 - 1.7
1.0 - 2.5
1.0 - 3.5
(Using color negative film; units; m)
●
In the following cases, the camera may not be able to focus
on the subject. Such subjects must be shot using the “Auto-
q A bright light source such as the sun is near the subject or
there is reflected light (from the windscreen of a vehicle,
waves, etc.) near the subject.
w A mirror or light-reflecting surfaces such as metals are near
the center of the picture.
e When shooting black light-absorbing subjects such as hair.
r There are gaseous substances such as flame or smoke.
t Taking pictures through glass.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE AUTO-FOCUS LOCK
In the composition shown above, the AF frame is off
the subject (in this case, the people). In this state,
the Lens will not focus on the subject.
Fig. 20
Move the camera slightly so that the subject is inside
the AF frame.
Fig. 21
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the Shutter Release Button halfway down (AF
lock) without moving the camera and confirm that
the AF lamp (Green) lights.
Fig. 22
While holding the Shutter Release Button halfway
down to keep the Auto-Focus lock on, move the
camera back to the original position to recompose
your picture, then press the Shutter Release Button
all the way down to take picture.
✻ The Auto-Focus lock operation can be repeated
any number of times before the shutter trips.
UNLOADING THE FILM CARTRIDGE
When the last frame has been exposed, and film is
rewound. The Exposure Counter shows the number
of frames remaining after subtracting the exposed
frames from the specified number of frames. When
rewinding of the film is finished, the “B” sign will
appear on the Exposure Counter.
Fig. 23
18
Download from Www.Somanuals.com. All Manuals Search And Download.
After “B” sign appears in the Exposure Counter and
the motor stops, move the Film Cartridge
Compartment Cover Release Knob in the arrow
direction, open the Film Cartridge Compartment
Cover, and take out the cartridge.
Fig. 24
✻ Confirm the “B” sign in the Exposure Counter
before opening the Film Cartridge Compartment
Cover. Otherwise, camera trouble or accidental
exposure of the film may occur.
✻ Do not apply unnecessary force to the Film
Cartridge Compartment Cover.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
FILM CARTRIDGE MID-ROLL CHANGE FUNCTION
When taking out the cartridge in mid-roll, turn on the
Fig. 25
power, by opening the Slide Cover, and then rewind
the film by pressing the MRC (Mid-Roll Change)
Button. When “B” is displayed on the Exposure
Counter and the motor stops, take out the cartridge.
Confirm that j 2 sign on the cartridge is white.
✻ If the MRC button is pressed when the power is
off, the film may not be rewound. Turn on the
power before rewinding the film.
2
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Load a new film cartridge (with a white i cartridge
status mark). The film will be advanced to the first
frame, and the number of exposures specified on the
film cartridge will appear on the LCD.
Fig. 26
When the film cartridge unloaded in a mid-roll (with
j cartridge status mark) is loaded again, the film will
be advanced automatically to the first unexposed
frame allowing you to use the film continuously.
✻ Even if you forget how many frames you have
exposed in the film cartridge changed in mid-roll,
there is no problem. Load the film cartridge again.
Your camera will automatically set the film to the
first unexposed frame, and the LCD will tell you
how many more frames you can take pictures.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
●
Cautions Concerning the Mid-roll Change Function
✻ When a cartridge that has been removed in mid-roll (j is dis-
played) is reloaded into the camera, if “B” blinks in the
Exposure Counter, reload the cartridge once more, avoiding
the following locations.
• Anywhere near a drier, fan, vacuum cleaner, etc., which has
a rotating motor.
• Near an active TV or personal computer display.
✻ If a cartridge is removed in mid-roll j and then loaded into a
camera which does not have the MRC function, the cartridge
will be set to exposed k and can no longer be used.
✻ A cartridge removed in mid-roll k from a camera which does
not have the MRC function cannot be used even if loaded
into this camera.
✻ If a cartridge is removed in mid-roll j and sent to the proces-
sor, all frames on the entire roll will be developed. Expose all
frames on the roll before sending the cartridge to the proces-
sor for development.
✻ Mid-Roll change of cartridge is guaranteed only among our
FOTONEX/ENDEAVOR series and nexia series of cameras
with MRC functions. If a cartridge exposed with another
make of camera with an MRC function is used, operation
may not be normal.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE EXPOSURE MODE
Display the desired Exposure Mode or Self-timer
Mode by pressing the Mode Button.
Fig. 27
✻ Back Light Compensation Flash Mode, Flash Off
Mode, Landscape Mode and Self-timer Mode are
cancelled automatically when the power is turned.
✻ The Landscape Mode and Self-timer Mode are
canceled each time a picture is taken.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
(
:no display) Automatic Flash at low
Fig. 28
Brightness Mode
Used when taking ordinary pictures
The flash lamp fires automatically when the bright-
ness of the subject is lower than the predetermined
level.
✻ When the Power Switch is turned on, the camera
is automatically set to this mode.
(b) Red-eye Reduction Flash Mode
Fig. 29
Used when you want to take your object’s pupils
naturally in a dark place
The Red-eye Reduction Lamp turns on for about 1
second, then the camera takes a picture when the
flash fires.
✻ Do not move the camera between pressing of the
shutter release button and firing of the flash.
✻ The flash fires without regard to the brightness of
the subject.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
●
A word on red-eye
When you photograph a person’s face in dim light with flash, the
eye will sometimes turn out red in the picture. This happens as
the light from the flash enters the eyes and is reflected back into
the camera lens. In the Red-eye Reduction Flash Mode, the
subject’s pupils are closed down before the flash fires.
In addition to using this mode, take the following actions:
• Ask the person being photographed to look directly at the
camera.
• Take pictures by approaching as close as possible to the per-
son.
(c) Back Light Compensation Flash Mode
Fig. 30
Used when taking against-the-light pictures of a
person standing by a window or under the shade
of a tree
Flash pictures taken even in a bright place.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
(d) Flash Off Mode
Fig. 31
Used when taking pictures with the room illumina-
tion being utilized, or taking pictures of a remote
subject to which the flash light does not reach, for
example, in a theater or a stadium
The flash stops firing.
✻ When taking pictures in a dark place, we recom-
mend the use of a tripod to prevent the camera
from shaking.
(e) Landscape Mode
Fig. 32
Used when taking landscape pictures clearly or
photographing remote (night) scenes through win-
dow glass
The lens is focused for the remote subjects. The
flash does not fire under this mode.
✻ This mode is automatically cancelled per shot.
✻ When taking pictures in a dark place, we recom-
mend the use of a tripod to prevent the camera
from shaking.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING SELF-TIMER MODE
Press the Mode Button to display the self-timer sym-
bol “r” on the LCD.
Fig. 33
✻ In self-timer shooting, the “Automatic Flash at low
Brightness Mode” or “Back Light Compensation
Flash Mode” can be selected.
Press the Shutter Release Button, and the Self-timer
Lamp will turn on. Lamp lights steadily for 7 sec-
onds, then blinks for remaining 3 seconds before
flash the fires and the shutter is released. At the
same time, the flash lamp fires in response to the
brightness of the subject.
Fig. 34
✻ Do not stand in front of the camera and press the
shutter release button. It could cause poor focus
or underexposure.
✻ The self timer mode is cancelled automatically
when a photo is taken, or the power is turned off.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
ERRORS, POSSIBLE CAUSES, AND REMEDIES
During operation
Error
Possible Causes
Remedies
●
●
Exposure counter shows blinking
“B G” sign though film cartridge
has been loaded and film cartridge
compartment cover has been
closed.
Open the film cartridge compart-
ment cover and check the film car-
tridge status mark. Are you using a
film cartridge with a white i (1)
or j(2) cartridge status mark ?
Unload the film cartridge and load an
unused film cartridge or a film cartridge
with unexposed frames remaining.
●
●
A cartridge has been inserted, but
the counter is not displayed on the
LCD.
Check to ascertain that the batter-
ies have been inserted after the
cartridge.
The shot will not be taken if the shutter
was operated in this condition. Remove
the cartridge without rewinding, and then
reload it again.
The film will not wind.
The shutter release won’t trip.
q “D” symbol is blinking.
w The power is not on.
q Replace the battery with a new one.
w Turn on the power by opening the slide
cover and set the camera to the ready-
to-shoot state.
e “B” is lit on the exposure counter.
e Unload the film cartridge and load an
unused film cartridge or a film cartridge
with unexposed frames remaining.
●
●
●
●
The film cartridge compartment
cover cannot be opened.
Are you attempting to unload the
film carriage in the middle of a roll ?
Rewind the film with the MRC Button.
Unload the film cartridge after “B ”
appears in the exposure counter and the
motor stops.
The film is not rewound even if the
MRC Button is pressed.
Were pictures taken with the slide
cover closed?
Open the slide cover, then press the MRC
Button again.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed pictures
Error
Possible Causes
Remedies
Picture is not sharp.
q Was your finger on the AF win-
q When shooting a picture, hold your cam-
era correctly so that your finger is not on
the AF windows.
dows when shooting?
w Did you focus on the subject cor-
w Make sure that the AF frame is on your
subject or the use Auto-Focus lock tech-
nique.
rectly ?
e Is the lens dirty ?
e Clean the lens.
r Was the camera shaking ?
r Hold the camera firmly and press the
shutter release button gently. When using
slow shutter speeds, we recommend the
use of a tripod.
t Did you select e mode when tak-
t Take pictures in other than e mode.
ing a close-up picture ?
Picture is dark.
q Was the subject too far from the
camera for flash photography in a
dark place ?
q Take pictures within the specified cover-
age distance of the flash.
w Was your finger over the flash ?
w Be careful not to cover the flash with your
finger.
●
●
Printed date (time) is incorrect.
Did you correct the date (time)
after loading or replacing the bat-
tery ?
Correct the date (time) after loading or
replacing the battery.
The date is not printed on the front.
q Wasn’t “- - -” selected before tak-
ing pictures?
q Select a date mode other than “- - - ”
before taking pictures.
w Some photo finishers may not sup-
port printing on the front.
w Consult your nearest photo finisher.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Film Advance
Flash
Automatic motorized wind and rewind
system, provisions for mid-roll rewinding
and Cartridge Mid-Roll Replacement
Pop-up Auto flash,6 sec. recycle time. Au-
tomatic flash at low brightness mode/Red-
eye Reduction flash mode/Back Light
Compensation mode/Flash off mode
Electronically controlled, 10 seconds de-
lay, self-timer on lamp
Film
IX240 cartridge film
Picture Size
Print Format
Lens
16.7 x 30.2 mm
C/H/P switchable
Fujinon Lens, 5 components, 5 elements,
f=23 – 69 mm / 1:6.7 – 1:12.5
Viewfinder
Focusing
Shutter
Real image zoom finder, 0.33 – 0.87 x
magnification, with AF frame (C, H, and P
formats switchable), parallax correction
mark, AF lamp
Active infrared auto focus 1m – ∞ with AF
lock, landscape mode (long distance lens
position setting, flash off setting), AF lamp
(turns on when focusing completes)
Programmed electronic shutter (1/8 –
1/300 sec.)
Self-timer
Liquid Crystal Display Exposure Mode Sign, Self-timer Mode
Sign, Battery Capacity Sign, Film Ca-
rtridge Mark, Date, Exposure Counter,
Type of Film Cartridge, Film Sensitivity
Date Recording
Magnetic recording system. Recordable
on each frame. Date, print type, and PQI
(Picture Quality Improvement) information
One lithium battery, CR 123A /DL 123A or
equivalent
Exposure Control Automatic,
interlocking range (ISO 200)
Power Supply
Others
Dimensions & Weight 113.5 x 62.0 x 42.5 mm
175 g (without battery)
W: EV11 – 14
✻
Built-in lens cover; with tripod socket
T: EV13 ( 11) – 14
✻
( is when the flash is disabled.)
Film Speed Setting Automatic (Date Disc System), ISO 100,
200, 400
✻ Specifications are subject to change without notice.
Film Loading
Single touch drop-in loading system, Film
safety lock system with optical erroneous
loading prevention system
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CAMERA CARE AND CAUTIONS
1. Your camera is a precision instrument which requires care-
ful handling. Do not expose it to shock, liquid, or drop it on
the floor.
7. Remove soil and dust from the lens, the AF window and
the finder with an air blower and by wiping lightly with a
piece of soft cloth. If that is not enough, wipe off gently with
Lens Cleaning Paper, moistened slightly with Lens
Cleaning Liquid. Do not use organic solvents such as alco-
hol and benzene.
1) If you use the camera at the seaside or in light rain, be
careful not to get it wet. Also be careful not to put the
camera in places where it will be easily exposed to
sand.
2) Dropping the camera on the floor or striking it against
hard objects sometimes causes trouble even though it
may be in the camera case. Also do not put the cam-
era in places where it is exposed to vibrations (such as
the trunk of a car).
8. The operating temperature range of the camera is from
–10°C to +40°C.
2. If you are not using your camera for a long time, keep it
where it will be safe from heat, moisture, dust, and harmful
gases (such as naphthalene which is used in drawers).
3. Since this camera is computer-controlled, it almost never
operates erroneously. If erroneous operation should occur,
remove and then reload the battery.
4. This advanced photo system magnetically records the
information on the film. Therefore, do not expose film car-
tridges or a film cartridge loaded camera to strong magnet-
ic fields.
5. Do not put the camera in a closed car for a long time.
6. It is recommended that undeveloped film and cameras con-
taining film are carried as hand luggage when using air-
craft. If included in checked-in baggage, X-ray inspections
may cause overprinting or other effects.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
26-30, Nishiazabu 2-chom e, Minato- ku, Tokyo 106-8620, J apan.
<FUJIFILM ABROAD>
In North America
FUJI PHOTO FILM U.S.A., INC.
555 Taxter Road, Elmsford, N.Y. 10523, U.S.A.
FUJI PHOTO FILM CANADA INC.
275 Britannia Road East, Mississauga, Ontario , L4Z 2E7, Canada
FUJI PHOTO FILM HAWAII, INC.
1650 Kalakaua Avenue, Honolulu, Hawaii 96826, U.S.A.
FUJI PHOTO FILM (EUROPE) G.m.b.H.
In Europe
Heesenstrasse 31, 40549 Dusseldorf, Germany
FUJI PHOTO FILM (U.K.) LTD.
Fuji Film House, 125 Finchley Road, Swiss Cottage, London NW3 6JH, England
FUJI FILM ESPAÑA, S.A.
Aragon, 180, 08011-Barcelona, Spain
FUJI PHOTO FILM DO BRAZIL LTDA.
In South America
Avenida Vereador Jose Diniz No. 3.400, Campo Belo- CEP 04.604
Cx. Postal 9.959., Sao Paulo-SP, Brazil
FUJI PHOTO FILM CO., LTD., HONG KONG OFFICE
Room 916, Sun Plaza, 28 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong
FUJI PHOTO FILM (SINGAPORE) PTE. LTD.
In Asia
10 New Industrial Road, Singapore 536201
FUJI PHOTO FILM (THAILAND) LTD.
S.P. Building, 8th Floor, 388 Phaholyothin Road, Bangkok 10400, Thailand
FUJI PHOTO FILM (MALAYSIA) SDN. BHD.
Letter Box 3, 3rd Floor Office Block 1, Crystal Plaza Lot 4, Jalan 51A/223, 46100 Petaling Jaya Selangor Darul Ehsan Malaysia
FUJI PHOTO FILM CO., LTD., TAIPEI OFFICE
Rm. 601, Hung Chong Bldg., No.38, Sec. 6, Min Chuan E. Road, Taipei 11412, Taiwan, Republic of China
FUJI PHOTO FILM CO., LTD., SEOUL OFFICE
Samduck Bldg. 6F., 144-1, Samsung-Dong, Kang Nam-ku, Seoul 135-090, Korea
FUJI PHOTO FILM CO., LTD., BEIJING REPRESENTATIVE OFFICE
Beijing Fortune Bldg. No. 817, 5, Dong Sanhuan Bei-lu, Chaoyang District, Beijing, China 100004
FUJI PHOTO FILM CO., LTD., HO CHI MINH OFFICE
29-31 Ton That Thiep St., Q.I Ho Chi Minh City, Vietnam
FUJI PHOTO FILM CO., LTD., NEW DELHI OFFICE
Le Meridian Commercial Tower 8F Janpath, New Delhi 110001, India
FUJI PHOTO FILM CO., LTD., SYDNEY REPRESENTATIVE OFFICE
c/o Hanimex Pty. Limited, Old Pittwater Road, Brookvale, N.S.W. 2100, Australia
FUJI PHOTO FILM CO., LTD., DUBAI OFFICE
In Oceania
In Middle East
No. 4G-17, L.O.B. No. 4, P.O. BOX 17212, Jebel Ali, Dubai, U.A.E.
BB10890-100
Printed in China
FGS-991111-Ni-01
Download from Www.Somanuals.com. All Manuals Search And Download.
|
