FEIN Turbo Vac II
9-55-13
9-55-13PE
Operating Instructions
/
ATTENTION: READ BEFORE USING
•
Make sure that the voltage nameplate of the device corresponds to the voltage of
your network. The plug has to be protected with a minimum of 15 Amps.
IMPORTANT! THE VACUUM CLEANER IS SUPPLIED FROM THE
FACTORY WITH A SUPPLY CABLE WITH A GROUNDED PLUG. IT
MUST ONLY BE CONNECTED TO AN APPROVED GROUNDED
SOCKET.
•
•
Before performing any maintenance work, unplug the vacuum from the outlet.
WARNING! EXPLOSIONAND FIRE HAZARD! Never vacuum flammable
fluids or gas, oil, alcohol, solvents, etc. Do not operate near flammable fluids or
gas. Never vacuum warm fluids or materials at more than 140º Fahrenheit
(60º Celsius), such as burning cigarettes, ashes, glowing coals, etc.
WARNING! DO NOT VACUUM HAZARDOUS/CARCINOGENIC DUST
UNLESS THE OPTIONAL HEPA FILTER IS INSTALLED.
Do not pull the vac by the cable and do not damage the insulation on the cable.
If the cable is damaged, it must be replaced immediately.
Always keep the filter cartridge clean so the vacuum cleaner operates properly.
•
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
To attach the wheels, press the wheel posts
into the four holes provided.
a) Connect the vacuum end of hose 2 to
the receptacle Q by pressing in. In order to
remove the hose, press button L on recep-
tacle and pull the hose out simultaneously.
b) Connect the handle 4 with the hose end 3
by pressing in. The handle is provided with a
suction force reducing device. Turn in the
direction of the arrow. In order to get full
suction pressure, keep the regulating device
closed.
c) Tube extension pieces 5 and accessories
can be connected by pressure. For disassem-
bling, slightly turn both parts and draw apart.
d) To use the optional combination attachment
1 for hard floors in PVC, linoleum, stone,
etc. press the switch button with your foot, so
that the bristles emerge d1. For carpets, the
bristles have to be retracted d2 .
1
Download from Www.Somanuals.com. All Manuals Search And Download.
9-55-13 / 9-55-13PE TURBO II VAC
ITEM # DESCRIPTION
PART NUMBER
11
12
13
16
17
18
35
42
44
53
57
73
POWER CORD SET
SCREW
3-07-05-065-99-9
901A11A89
101035K00
901A19A89
901D07AG87
905217000
901A16A89
905391000
920056000
521006K13
905278K15
905331R00
CABLE CLAMP
SCREW
WASHER
TERMINAL BLOCK
SCREW
CABLE
BUNGEE
FACE PLATE
RECEPTACLE COVER
AUTO START SWITCH
AUTO START SWITCH (9-55-13PE) 905490A000
107
111
112
200
201
202
203
205
206
209
210
211
212
213
216
217
218
219
220
222
255
280
286
287
412
420
427
445
500
SWITCH (ON/OFF)
RECEPTACLE
905306000
905398K13
SWITCH (MANUAL /AUTO)(WIDE) 905307A000
TOP HANDLE
521049AK50
521049B50
920021B00
902033000
521002K13
902048000
920042000
920039000
902043000
918M5602U
905317G02
902036000
521003K13
902032A00
920038000
521010K00
521007K13
920060000
920065000
521052K50
524301B15
525002089
521047K41
521016A13
913064AGA6
921049GN1
921159AK30
921047K13
921048K13
919067K13
919066A13
918V01A001
COVER WITH HANDLE
COVER GASKET
COVER SOUNDPROOFING
COVER BAFFLE
SIDE SOUNDPROOFING
MOTOR GASKET - 110 VOLT
CHAMBER MOTOR GASKET
MOTOR SOUNDPROOFING
MOTOR - 110 VOLT
CARBON BRUSHES (2)
MOTOR SOUNDPROOFING
MOTOR COVER
MOTOR FILTER
GASKET - 110 VOLT
FLOAT
FLOAT CAGE
PLUG
PLUG
CONTAINER
BUMPER
LOCK LEVER
SWIVELWHEELS
HOSE RECEPTACLE
CLOTH FILTER
16' HOSE
16' HOSE (9-55-13PE)
SLEEVE - VACUUM END
SLEEVE - TOOL END
CONNECTOR RING
RING - HOSE
501
502
504
505
710
PNEUMATIC VALVE (9-55-13PE)
Download from Www.Somanuals.com. All Manuals Search And Download.
SUCTION OF DRY DUST AND DIRT (continued)
ATTENTION: If suction pressure decreases, replace
the paper dust bag H with a new one. From time to
time the filter cartridge G should be cleaned with a
soft brush, ensuring longer life and higher perfor-
mance.
SUCTION OF FLUIDS
a) First, remove any dirt and dust residue from
previous cleaning operations from the container.
Remove the cloth filter or the cartridge filter G and
replace it with the anti-foam filter R . DO NOT USE
THE CLOTH FILTER, THE CARTRIDGE FILTER
OR THE PAPER DUST BAG DURING THE
SUCTION OF FLUIDS.
b) In order to guarantee enough air flow, it is recom-
mended that accessories not be completely immersed
into the fluids.
c) When the fluids have reached the highest permitted
level in the tank, the float regulator F automatically
blocks suction and the motor gets noisier. Switch the
vacuum off IMMEDIATELY, pull out the plug,
remove the suction head from the tank and empty the
tank.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
9-55-13 / 9-55-13PE TURBO II VAC ACCESSORIES
Item Part Number
Description
1
2
3
4
5
6
7
8
9
919036B94
921067A13
921069A13
921072K13
919001A13
919003K13
919007K13
921051A13
921056000
Extension tube-chrome
Handle
Adaptor
Step adaptor
Brush
Upholstery nozzle
Crevice tool
Wet brush
Rubber strip
10 919064B13
11 919043R14
12 90204200
13 TII1MCRN
TIIHEPA
Floor brush with rollers
Thread pick for brush
Anti-foam filter
1Micron filter
Hepa filter 0.3 microns
Flange filter
14 TII3002
15 TII3001
Turn screw-filter
Cloth filter
16 913064AGA6
17 913036K01
18 921086AA13
19 921087AK13
20 3916054A089
21 526300AA13
Paper dust bag- 3 pack
Y connector with cap
Y cap
Hose cradle
Basket and strap
Kits: FBK
consists
TIIMCRN 1 Micron pleated filter
913036A01 Paper dust bag
TII3002 Filter flange
of 1 each
TII3001 Flange turn screw
FBK-HEPA
consists
of 1 each
TIIHEPA Hepa pleated filter
913049A01 Hepa dust bag
TII3002 Filter flange
TII3001 Flange turn screw
DW1
consists
of 1 each
(2) 919036B94 Extension tube
921067A13 Handle
919007K13 Crevice tool
902042000 Anti-foam filter
919001A13 Brush
921051A13 Wet floor brush
919003K13 Upholstery Nozzle
919064B13 Floor brush
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
After every use:
.
.
.
Empty the tank (dirt, dust, and fluids).
Never leave fluids in the tank. This could cause damage to the tank.
After vacuuming fluids, it is necessary to dry extension pieces, tube
and motor parts by running the vacuum a few minutes, after having
emptied the tank.
.
Always keep a reserve of paper dust bags and filter cartridges, so
that the vacuum is always ready for use.
FEIN Power Tools Inc.
1030 Alcon Street
Pittsburgh, PA 15220
(800) 441-9878
REV. 06-15-06
Download from Www.Somanuals.com. All Manuals Search And Download.
|