Fisher Price Doll W1710 User Manual

W1710  
Please keep this instruction sheet for future reference,  
as it contains important information.  
Requires three “AA” (LR6) alkaline batteries (not included) for operation.  
Adult assembly is required. Required tool: Phillips screwdriver (not included).  
Wipe with a clean, damp cloth. Do not immerse.  
This toy has no consumer serviceable parts. Do not take apart.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Wall  
Screw  
Tree  
Back View  
1
• Fit the tree onto the wall.  
• Lay the assembly face down on a flat surface and insert a screw into the wall and tighten.  
Teeter-totter  
Post  
2
• Turn the assembly over.  
• Fit the post on the teeter-totter into the hole in the wall assembly.  
Hint: You may need to turn the teeter-totter to fit it in place.  
• Push to “snap” in place.  
Download from Www.Somanuals.com2. All Manuals Search And Download.  
Assembly  
3
• Turn the assembly upright.  
• Fit the tabs on to the bottom of the wall assembly into the slots in the base.  
Hint: If the tabs on the wall assembly do not seem to fit, turn it around and try again!  
• Push near each tab to “snap” in place.  
Peek-a-boo Door  
4
• At an angle, fit the peg on one side of the peek-a-boo door into the socket in the wall.  
• Then, push to “snap” the other peg in place.  
Hut Roof  
5
• Fit the tabs on the hut roof into the slots in the tree. Push to “snap” in place.  
Download from Www.Somanuals.com3. All Manuals Search And Download.  
Assembly  
Platform  
A
B
Back View  
Upper Ramp  
• First fit the tab on the platform into the slot in the backside of the wall . Then, fit the upper ramp into  
6
A
B
the slot in the front of the wall  
.
• Push to “snap” the platform and upper ramp into the wall.  
Lower Ramp  
A
Upper Ramp Tabs  
B
Base Slot  
7
Back View  
• From the back of the wall assembly, first fit the top of the lower ramp onto the tabs on the upper  
B
ramp . Then, fit the tab on the bottom of the lower ramp into the slot in the base  
.
A
• Push to “snap” in place.  
Download from Www.Somanuals.com4. All Manuals Search And Download.  
Assembly  
Canopy Swing  
8
• Fit the canopy swing onto the outer tree branch, as shown. Push to “snap” in place.  
Large Tree Canopy  
9
• Fit the large tree canopy onto the remaining tree branch. Push to “snap” in place.  
Download from Www.Somanuals.com5. All Manuals Search And Download.  
Assembly  
Handle  
2 Screws  
10  
• Fit the handle onto the pegs on the wall assembly.  
• Insert two screws into the handle and tighten.  
Gate  
11  
• Fit the gate into the socket in the base, as shown. Push to “snap” in place.  
Download from Www.Somanuals.com6. All Manuals Search And Download.  
Assembly  
Flag  
12  
• Insert the flag into any of the sockets in the assembly.  
Decoration  
• Before applying the labels, wipe the surface with a clean, dry cloth to remove any dust or oils.  
• Place the labels exactly as shown in the illustration and avoid repositioning the labels.  
• After applying a label, rub it firmly with a clean dry cloth, starting at the center, to remove any  
air bubbles.  
3
1
6
2
5
4
9
8
7
Download from Www.Somanuals.com7. All Manuals Search And Download.  
Battery Installation  
1,5V x 3  
“AA” (LR6)  
• Locate the battery compartment door on the bottom of the toy.  
• Loosen the screw in the battery compartment door and remove it.  
• Insert three, new “AA” (LR6) alkaline batteries.  
Hint: We recommend using alkaline batteries for longer battery life.  
• Replace the battery compartment door and tighten the screw. Do not over-tighten.  
• If this toy begins to operate erratically, you may need to reset the electronics. Slide the  
power/volume switch off and then back on.  
• When sounds from this toy become faint or stop, it’s time for an adult to change the batteries.  
• Protect the environment by not disposing of this product with household waste (2002/96/EC).  
Check your local authority for recycling advice and facilities (Europe only).  
Download from Www.Somanuals.com8. All Manuals Search And Download.  
Battery Safety Information  
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury  
or ruin your toy. To avoid battery leakage:  
• Do not mix old and new batteries or batteries of different types: alkaline, standard  
(carbon-zinc) or rechargeable (nickel-cadmium).  
• Insert batteries as indicated inside the battery compartment.  
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the  
toy. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may  
explode or leak.  
• Never short-circuit the battery terminals.  
• Use only batteries of the same or equivalent type, as recommended.  
• Do not charge non-rechargeable batteries.  
• Remove rechargeable batteries from the toy before charging.  
• If removable, rechargeable batteries are used, they are only to be charged under  
adult supervision.  
ICES-003  
• This Class B digital apparatus complies with Canadian ICES-003.  
• Operation is subject to the following two conditions: (1) this device may not cause harmful interference  
and (2) this device must accept any interference received, including interference that may cause  
undesired operation.  
NMB-003  
• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Lutilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire  
de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu,  
même si ce brouillage est susceptible de compromettre le fonctionnement  
du dispositif.  
Download from Www.Somanuals.com9. All Manuals Search And Download.  
Zoo Fun!  
PRESS  
Slide the power/volume  
switch on the bottom  
of the toy ON with low  
PRESS  
volume  
; ON with  
high volume  
or OFF  
;
.
PRESS  
PPRREESSSS  
• Press down on the ticket  
booth and the ticket taker  
will talk to you.  
• Press the lily pad or nest  
for sounds.  
• Fit an animal figure onto  
the button on the base.  
Each animal makes  
different sounds!  
Download from Www.Somanuals.co1m0. All Manuals Search And Download.  
CONSUMER ASSIS
T
A
NCE  
1-800-432-5437 (US & Canada)  
1300 135 312 (Australia)  
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.  
Hearing-impaired consumers: 1-800-382-7470.  
Outside the United States:  
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,  
Great Britain: Mattel UK Ltd, Vanwall Business Park,  
Maidenhead SL6 4UB. Helpline: 01628 500303.  
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.  
Australia: Mattel Australia Pty. Ltd., 658 Church Street,  
Locked Bag #870, Richmond, Victoria 3121 Australia.  
New Zealand: 16-18 William Pickering Drive,  
Albany 1331, Auckland.  
FCC Statement (United States Only)  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following  
measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Consult the dealer or an experienced radio/TV technician for help.  
Note: Changes or modifications not expressly approved by the manufacturer responsible for  
compliance could void the user’s authority to operate the equipment. This device complies with Part  
15 of the FCC Rules.  
Operation is subject to the following two conditions: (1) This device may not cause harmful  
interference and (2) this device must accept any interference received, including interference that  
may cause undesired operation.  
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.  
©2011 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.  
PRINTED IN MEXICO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
W1710a-0920  

Electro Voice Microphone N D 257B User Manual
Essick Air Humidifier EA1407 User Manual
Euro Pro Garbage Disposal GC130HS User Manual
FEIN Power Tools Grinder WSs 12 125 User Manual
Fisher Price Baby Toy G5760 User Manual
Fluke Weather Radio 29 User Manual
Focal Car Speaker 570 CA1 User Manual
FujiFilm Printer 4500N User Manual
Fundex Games Games UNO Diary of a Wimpy Kid User Manual
Generac Power Systems Portable Generator 005221 0 User Manual