™
Infant-to-Toddler Rocker
Toddler Seat
Infant Seat
Model Number: 79026
Please keep this instruction sheet, as it contains important information.
Use the upright position only when your child has developed enough upper body control to sit without leaning forward.
Always use the restraint until your child is able to climb in and out of the chair unassisted.
Designed for use with children from birth to 40 lbs (18 kg).
Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).
Requires one “D” (LR20) alkaline battery (not included) for vibrations unit operation.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
IMPORTANT! Before assembly, inspect this product for
damaged hardware, loose joints, missing parts or sharp
edges. DO NOT use if any parts are missing or broken.
Contact Fisher-Price® for replacement parts and instructions
if needed. Never substitute parts.
3
4
#8 x / " Screw
Shown Actual Size
Cross
Brace
CAUTION
This package contains small parts
in its unassembled state.
2
Adult assembly is required.
Side
Rails
• Insert a screw through the hole in the bottom of each side
rail and into the cross brace. Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
Cross Brace
Button
Seat Back Tube
Push
Push
Side Rails
1
• Position each side rail so that the button faces outward.
• Fit the cross brace between the side rails, as shown.
3
• Push the cross brace down to “snap” it into place. This may
require a lot of force.
• Insert the seat back tube into the socket in each side rail.
• While pressing the tabs on the ends of the seat back tube,
continue to insert the seat back tube into the sockets in
each side rail, until the tabs “snap” into place. Make sure
you hear a “snap” on each side.
• Pull the seat back tube up to be sure it is secure in the
side rail sockets.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Side
Rail
Side Rail
Hole
Front Tube
Side
Rail
Front Tube
Vibrations
Unit
Side Rail
Hole
5
4
1
#8 x 1 / " Screw
4
1
4
• Locate the hole in each side rail.
• Insert a #8 x 1 / ” screw
through the outside of
each side rail and into the
ends of the front tube.
Shown Actual Size
• With the vibrations unit facing forward, fit the front tube
to the side rails, as shown. Hold the front tube in place
and proceed to step 5.
IMPORTANT! Please follow the next assembly (step 6)
carefully to completely secure the front tube to the
side rails.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Retainer
with Lock Nut
Kickstand
Press
Tab
Press
Tab
Rounded Side
6
Receptacles
7
M4 Lock Nut - 2
(Inside Retainer)
• Fit a retainer with lock nut
onto the end of the screw
and to the inside of a
side rail.
Shown Actual Size
• Position the assembly face down, as shown.
• While pressing the tab on each end of the kickstand, insert
the kickstand into the receptacle in each side rail, as
shown.
• Push the kickstand into the receptacles until the
tabs “snap” into place. Make sure you hear a “snap” on
each side.
Hint: A lock nut has been factory assembled to the retainer.
During shipment, the lock nut may have fallen out of the
retainer. If it has, please fit it into the hexagonal hole in the
retainer so that the rounded side of the lock nut faces out.
• Pull the kickstand to be sure it is secure in the receptacles.
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
• Repeat this procedure to fasten the screw in the other
end of the front tube and side rail, using the remaining
retainer with lock nut.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Pad
Pad Slot
Press
Seat Back
Seat Back
Tube
Hardboard
8
9
Side
Rail
• Turn the assembly upright.
• Fit the upper pocket on
the pad onto the seat
back tube.
• Fasten the pad buckles
around each side rail.
• Turn the hardboard over
and insert it into the
slot in the front edge of
the pad.
Pad
Buckles
• Fasten the pad buckles on
the front edge of the pad and underneath the seat. Make
sure you hear a “snap” on both sides.
Pad
Buckles
• Press the fasteners together in the seat back portion of
the pad.
Assembly is now complete.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Installation
Battery Tips
1.5V
“D” (LR20)
+
–
SHOWN ACTUAL SIZE
• Remove the battery during long periods of non-use.
Always remove an exhausted battery from the product.
Battery leakage and corrosion can damage this product.
Dispose of the battery safely.
• Do not dispose of the battery in a fire. The battery may
explode or leak.
Battery
Compartment
• Do not dispose of the musical toy in a fire. The battery(ies)
inside the toy may explode or leak.
• Never short circuit the battery terminals.
• Locate the battery compartment on the bottom of the
vibrations unit.
• Loosen the screw in the battery compartment door with a
Phillips screwdriver.
• A non-rechargeable battery should not to be recharged.
• Only a battery of the same or equivalent type as
recommended in the “Battery Installation” instructions
is to be used.
• If a removable rechargeable battery is used, it is only to be
charged under adult supervision.
• Lift to remove the battery compartment door.
• Insert one “D” (LR20) alkaline battery as indicated inside
the battery compartment.
Hint: We recommend using an alkaline battery for
longer battery life.
• A rechargeable battery is to be removed from the product
before it is charged.
• If you use a battery charger, it should be examined
regularly for damage to the cord, plug, enclosure and
other parts. Do not use a damaged battery charger until
it has been properly repaired.
• Replace the battery compartment door and tighten the
screw with a Phillips screwdriver. Do not over-tighten.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Set-Up & Use
Securing your Infant
IMPORTANT! Before each use, inspect this product for
damaged hardware, loose joints, missing parts or sharp
edges. DO NOT use if any parts are missing or broken.
Contact Fisher-Price® for replacement parts and instructions
if needed. Never substitute parts.
WARNING
To prevent serious injury and/or falls:
• Always use the restraint until child
is able to climb in and out of the
chair unassisted.
WARNING
To prevent serious injury and/or falls:
Use the upright position only when
child has developed enough upper body
control to sit without leaning forward.
• Never use on any elevated surface.
• Never leave child unattended.
Seat Position
Restraint
Restraint
Belt
Lower
Belt
Lift
Press
Button
Press
Button
Restraint
Pad
1
Recline
Upright
Select a seat position for your child’s comfort:
Upright or Recline.
2
Upright
While pressing the button on each side rail, lift the seat back.
• Place your child in the seat. Position the restraint pad
between your child’s legs.
Recline
While pressing the button on each side rail, lower the
seat back.
• Fasten the restraint belts to each side of the restraint pad.
Make sure you hear a “click” on both sides.
• Check to be sure the restraint system is securely attached
by pulling it away from your child. The restraint system
should remain attached.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing your Infant
Toys
Anchored End
Anchored End
Strap
B
Strap
Strap
B
Toy
Free End
Toy
Free End
3
Loosen
Tighten
To tighten the belts:
• Feed the anchored end of the restraint belt up through the
buckle to form a loop
• Pull the free end of the restraint belt
• Repeat this procedure to tighten the other restraint belt.
.
4
B
Toy
.
To loosen the belts:
• Fit the pad straps through
the slot in the toy rings.
Fasten the straps.
• Or, attach the toys to the
toy bar straps (please see
Step 5).
• Feed the free end of the restraint belt up through the
buckle to form a loop . Enlarge the loop by pulling on
the end of the loop toward the buckle.
• Pull the anchored end of the restraint belt to shorten the
free end of the restraint belt
B
.
• Repeat this procedure to loosen the other restraint belt.
Hint: Pull the monkey’s head for a short tune.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Toy Bar
Calming Vibrations
Toy Bar
Plug
Plug
6
Toys
Power Switch
• Make sure your child is properly secured in the seat.
• Slide the power switch to the on position for
calming vibrations.
• Slide the power switch to the off position to turn
vibrations off.
5
• Fit the plugs on each end
of the toy bar into the
sockets in each side rail.
• Fit the toy bar straps
through the slot in the toy
rings. Fasten the straps.
• Or, attach the toys to the
pad straps (see Step 4).
Hint: Pull the monkey’s head for a short tune.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Kickstand
Storing the Restraint
System for Toddler Use
Small Slot
Small
Slot
Large
Slot
7
Kickstand
8
• Rotate the kickstand out.
• Push down on the seat bottom to be sure the kickstand
is in position.
• Insert the restraint belts back through the small slots in
the pad.
• Insert the restraint pad down through the large slot in
the pad.
9
• Turn the rocker face down.
• Tuck the ends of the restraint pad underneath the buckles,
as shown.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
(United States Only)
FCC Note
Care
Note:This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
• The pad is machine washable. Wash the pad separately in
cold water on the gentle cycle. Do not use bleach. Tumble
dry separately on low heat and remove promptly.
• The frame, toy bar and toys may be wiped clean using
a mild cleaning solution and a damp cloth. Do not use
bleach. Do not use harsh or abrasive cleaners. Rinse clean
with water to remove residue.
To remove the pad:
• Unfasten the buckles around each side rail.
• Turn the seat face down on a flat surface. Unfasten the
buckles on the pad.
• Turn the seat upright. Remove the hardboard from the
slot in the front edge of the pad.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Pull the front and back of the seat back area of the
pad apart.
• Lift the pad off the seat.
• Consult the dealer or an experienced radio/TV technician
for help.
To replace the pad, refer to Assembly steps 8 and 9.
Note: Changes or modifications not expressly approved by
the manufacturer responsible for compliance could void the
user‘s authority to operate the equipment.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2002 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China
79026pr-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
|