Globalsat Technology GPS Receiver BT 359 User Manual

BT-359 GPS User’s Guide  
Bluetooth GPS Receiver  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BT-359 GPS  
Table of Contents  
PACKAGE CONTENTS..................................................................................................3  
SYSTEM REQUIREMENTS ...........................................................................................3  
WELCOME......................................................................................................................3  
1. GETTING STARTED..................................................................................................4  
2. THE BT-359................................................................................................................4  
3. CHANGING THE BATTERY......................................................................................5  
4. GPS FUNCTIONS......................................................................................................5  
5. INITIALIZING YOUR GPS RECEIVER......................................................................7  
6. USING / TESTING YOUR GPS RECEIVER (WIN / PPC only) ................................7  
7. FAQ’s .........................................................................................................................9  
8. CONTACT INFORMATION .....................................................................................10  
9. SAFETY AND LEGAL NOTICES............................................................................10  
10. LIMITED WARRANTY...........................................................................................11  
11. BT-359 SPECIFICATIONS ....................................................................................12  
PAGE 2 OF 13  
BT359_GPS_v1.2.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BT-359 GPS  
PACKAGE CONTENTS  
- Bluetooth GPS Receiver  
- Driver CD-ROM with User’s Guide and test utility for WIN and Mac O/S*  
- 12VDC vehicle cigarette lighter  
- 110/240 0.2A VAC home/office charger (Euro AC Adapter sold separately #BT338-006A)  
- USB charger interface cable  
SYSTEM REQUIREMENTS  
The GlobalSat Bluetooth GPS receivers requires a Bluetooth enabled device that can accept  
accessory pairing, such as PDA’s, Smartphones, Laptops or Laptops with added Bluetooth USB  
dongles.  
Also a NMEA compatible navigation or map software for your operating system (O/S). Your 3rd party  
mapping/navigation software may have its own system requirements, please check with software  
vendor for details.  
A computer with a CD-ROM drive is only required to view the Users Guide, or load the test utility  
program for either Windows or Mac operating systems. These files and programs are also available for  
download directly from our web-site at: http://www.USGlobalSat.com  
WELCOME  
Thank you for purchasing a GlobalSat Bluetooth GPS receiver! GlobalSat GPS receivers allow for real-time street  
navigation by using your laptop for graphical plotting and positioning of your route. Simply pair the GPS receiver,  
with your Bluetooth enabled device, install your own personal mapping software, and begin to view your position in  
real-time in relation to the surrounding streets in your travel area.  
You’ll find that almost any NMEA compliant mapping/charting software will be compatible with the data from your  
GlobalSat Bluetooth GPS receiver.. Visit our web-site for recommended mapping programs that you can use.  
PAGE 3 OF 13  
BT359_GPS_v1.2.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BT-359 GPS  
1. GETTING STARTED  
GlobalSat Bluetooth GPS receivers utilize a Bluetooth (short distance wireless protocol) and a built-in  
active antenna for high signal tracking sensitivity. Based on the SiRF Star III Low Power chipset, our  
GPS receivers support all functions (single sat updates in reduced visibility, superior urban canyon  
performance, foliage lock for weak signal tracking, etc.). Our Bluetooth GPS receivers are well suited  
for use with PDA’s, Smartphones, tablet PC’s and notebook PC’s and laptops which are already  
Bluetooth enable. GPS receivers can be used in a wide variety of applications from in vehicle  
navigation to and outdoor recreation and commercial applications.  
2. THE BT-359  
The BT-359W shown above and the BT359C (not shown) are models which can be found in North America, while  
the BT-359S can also be found in Europe. There are no differences between these models with exception to the  
cosmetic faceplate used. The “W” is a radio wave patter, the “C” is a glossy black faceplate, while the “S” has the  
appearance of a solar cell graphic. Electronically they are the same device.  
PAGE 4 OF 13  
BT359_GPS_v1.2.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BT-359 GPS  
3. CHANGING THE BATTERY  
1. Slide battery cover lock into the open UNLOCK position and lift up carefully on battery cover from  
lock end at seam where cover meets the main GPS housing.  
2. Use the pull tab to lift out Li-ion battery.  
3. Replace battery making sure that the battery contact on the bottom side of battery touch the  
contacts on the BT-359 within the battery compartment. (Pull tab should at the same end as the  
battery cover lock)  
4. Carefully hook the two catches of the battery cover to the GPS housing and gently close battery  
cover.  
5. Place battery cover lock into the “locked” position.  
Pull Tab  
Cover Hooks Here  
4. GPS FUNCTIONS  
Turning the BT-359 ON / OFF  
BT-359’s Power Button  
Power ON:  
Press the power button for 1 second until the power LED becomes lit.  
Power OFF:  
Press the power button 1 second until the power LED goes off.  
PAGE 5 OF 13  
BT359_GPS_v1.2.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BT-359 GPS  
Power Jack  
The mini-USB is a power jack that lets allows you to connect to either a DC vehicle charger or an AC  
charger home/office charger for re-charging the internal Lithium-ion (Li-ion) battery. The voltage input  
into the BT-359 must be 5VDC (01.6 A) center positive connector. You can also use the USB  
interface cable to charge directly from your PC’s USB port. (The USB interface can only be used for  
charging the GPS receiver’s battery and cannot be used to transfer data.) Upon powering your new  
BT-359 GPS receiver for the first time it may require as much as 6 hours to fully charge, thereafter  
charging times may be reduced. The built-in regulator will prevent your battery from being  
overcharged, however it is always best to unplug the GPS receiver from the charger after charging has  
completed and not to leave it connected for extended periods of time..  
Status LED Functions  
Mini-USB Power Port  
(not for data transfer)  
Power Status LED (Red/Yellow):  
Red ---- Battery power is critically low. (charge immediately)  
Yellow ---- Battery is currently charging .  
LED off ---- Battery is charged (partial or full).  
GPS Status LED (Green):  
Blinking ---- GPS position is fixed (GPS signal is being received)  
Steady light ---- GPS position is not fixed (no GPS signal)  
Bluetooth Status LED (Blue):  
Blinking (Slowly) ---- Not connected to a Bluetooth device.  
Blinking (Quickly) ---- Connected to a Bluetooth device.  
Auto Shut-Off (Power-Saving Mode)  
To conserve battery life, whenever the GPS receiver does not detect a Bluetooth signal for over 10 minutes, the BT-  
359 will automatically shut off, but only when operating from it’s internal Li-ion battery.  
If connected to an external power source (AC or DC charger), then the BT-359 will remain on.  
We strongly suggest that you first test your USG GPS with the included GPS Info utility program to confirm that the  
GPS receiver if functioning properly on your PC and that you have successfully configured the right COM Port  
setting. Once this has been done, close the GPS Info program and start your application for COM port  
configuration.  
NOTE: By default, your PC will not allow you to run multiple applications from a single COM port. It is important that  
you close any previously opened GPS application before switching to another GPS application as the GPS receiver  
and data will not be found by the new program.  
There are special utilities available to split data into multiple COM ports for use by more than one application  
simultaneously. (see: http://franson.com/gpsgate/ )  
PAGE 6 OF 13  
BT359_GPS_v1.2.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BT-359 GPS  
5. INITIALIZING YOUR GPS RECEIVER  
Before using your Bluetooth GPS receiver for navigation (especially for the first time), the receiver must  
obtain a local GPS fix (coordinates) of the current position. To do this, take your device loaded and  
configured with your mapping software to an open area that has a clear view to the sky. Start your  
software (or the included GPS Info utility program) and wait for initialization of the GPS to complete.  
This may take a few minutes depending on various factors such as the distance of the current  
coordinates from the last time the GPS receiver was activated, GPS signal strength and surrounding  
terrain (tall trees and buildings can block the satellite signals). Once the RAW GPS data is displayed  
onto the screen, if applicable for your software, a fix has been initialized (Green LED on the GPS will  
also start to flash). In some cases initialization can take up to several minutes depending on the  
conditions mentioned above before complete GPS data will be displayed on the screen.  
Coordinates scrolling with zero’s means that the port connection is complete, but the satellite data is not  
being received yet (possibly still initializing or in a bad area for satellite reception).  
6. USING / TESTING YOUR GPS RECEIVER (WIN / PPC only)  
Once your Bluetooth GPS receiver has been paired with your device and your personal mapping  
software have been installed and the COM port configured properly, you can begin to use your  
navigation system. If you don’t have a mapping, or navigation software to try out your new GPS  
receiver, we’ve included a GPS test utilities called “GPS Info” (GPSInfo.exe) for Windows and Pocket  
PC devices located in the Win directory and “GPS Utility” (Mac_GPS_Utiltiy_V2.dmg) is located in the  
.Mac directory of the CD-ROM.  
Always select an area in the vehicle where the GPS unit will be secure and not obstruct normal driving,  
visibility and safety, but still maintaining a “view to the sky” in order to receive satellite data.  
WIN and PPC devices:  
It is recommended that you first load and test your GPS receiver with the GPSinfo.exe. This process  
will confirm you have found correct COM port number and have configured it properly.  
1. Run GPSinfo.exe to load the utility.  
2. Enter the proper COM port for your GPS device (see COM Port Verification above)  
3. Set COM port to Baud rate: 34800  
4. If no errors have been made in configuration, there should be GPS data being displayed in the  
window, which is confirmation that the communication between the GPS device and the “GPSinfo”  
software is working properly.  
5. If there is no GPS data displayed (or data with multiple zeros in them), please exit the software and  
unplug the GPS receiver from the USB port and reinsert it after 10 seconds to reset the device.  
PAGE 7 OF 13  
BT359_GPS_v1.2.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BT-359 GPS  
This screen shows the satellites being received (numbers) and their signal strengths.  
NOTE: Configuration (or selection) of an assigned COM port for the GPS device from within your  
mapping or charting software must be completed whenever using a software for the first time.  
Mac Users: Mac users need to run the Mac_GPS_Utiltiy_V2.dmg located in the .Mac directory of the  
CD-ROM or download the utility file from our web-site: www.USGlobalSat.com/mac  
PAGE 8 OF 13  
BT359_GPS_v1.2.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BT-359 GPS  
7. FAQ’s  
What is the difference between the BT-359W and the BT-359S?  
There is no difference between these two models with exception to the cosmetic faceplate used. The “W” is a radio  
wave patter, while the “S” has the appearance of a solar cell. Internally they are the same device.  
I am not getting GPS data into my application on my Windows PC.  
1. Check your DEVICE MANAGER to confirm the COM Port number assigned to the GPS. Then be sure  
this is the same COM port number configured in your application.  
2. Be sure your Baud rate is configured correctly at:  
Baud Rate: 38400  
Data bit: 8  
Parity: None  
Stop Bit: 1  
Flow Control: None  
3. Configure the GPS Info utility with the correct COM Port and test your GPS receiver first before using it  
in your application.  
Will the GPS work with other Street Mapping software?  
GlobalSat GPS receivers provides standard NMEA data for mapping software to use and convert to coordinates  
and should work well with most any NMEA compliant software on the market today.  
How accurate is the GPS?  
The Gloablsat GPS is WAAS/EGNOS capable, and for units sold in North America through authorized resellers,  
these units are WAAS/EGNOS enabled unless otherwise stated. Accuracy can be between 1~5 meters 2D RMS  
with WAAS enabled and 10-15 meters 2D RMS WAAS disabled  
What is ideal GPS environment?  
The GPS requires an open, clear view of the sky. Buildings, covered parking areas, tunnels and dense foliage can  
cause the GPS receiver to be unable to get a location fix.  
If you are parked in a covered parking lot or near a tall building, it is recommended that you drive away until you  
have a clear view of the sky before using the GPS receiver. You may need to give the GPS a few minutes to find or  
get a fix its location.  
How do I know if the GPS is ON?  
If your PC is on and the COM port was configured properly, the GPS receiver is on and receiving the streaming  
GPS data. This can be verified by opening your mapping software program. In addition, the GlobalSat GPS has a  
built-in LED status indicator that shows the following:  
LED OFF: GPS receiver is off (no power).  
LED ON (solid): No fix, searching for GPS signals.  
LED FLASHING: Position fix established and GPS signals are being received.  
Why does the GPS not work near buildings and other tall objects?  
The GPS uses satellites in the space to find out where it is. Therefore it needs a clear view of the sky. Tall buildings  
and other objects that block the receiver’s view to the sky make it infeasible to determine your location. Sometimes  
the satellites are not overhead but near the horizon. In these cases the GPS must have a clear view of the horizon.  
Other Comments-  
Please allow an adequate amount of time for the GPS receiver’s boot-up (TTF) to complete before contacting  
Technical Support.  
PAGE 9 OF 13  
BT359_GPS_v1.2.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BT-359 GPS  
8. CONTACT INFORMATION  
GlobalSat Technology Corporation (Taiwan)  
USGlobalSat, Inc.  
www.USGlobalSat.com [email protected] (pre-sales GPS product questions only)  
Technical Support (North America)  
See our DOWNLOADS and FAQ section on our web-site for GPS solutions, driver literature updates.  
Pre-registration is required before receiving any type of technical support. Support issues submitted via  
phone, fax or e-mail (any means outside of the recognized “Support Ticket” generated from your own  
USGlobalSat registered account) may not be answered as quickly as with a “Support Ticket”.  
Create your account and register your products at: www.USGlobalSat.com/support/custadminlogin.asp  
9. SAFETY AND LEGAL NOTICES  
Please read this section carefully before using the GPS receiver.  
GlobalSat Technology Corporation / USGlobalSat, Inc. will not accept any responsibility whatsoever for  
accidents resulting from failure to observe common sense precautions. Your personal judgment, traffic  
regulations, and common sense must always take precedence over any directions produced by GPS  
receiver or the mapping software  
WARNING: Make sure that the GPS receiver is secure and does not interfere with driving visibility and  
safety.  
It is your responsibility as the vehicle operator to securely place the GPS unit and antenna so that they will not  
interfere with driving and prevent operations of any safety device (such as the Airbag) in your vehicle. Do not  
mount the devices in a place where the driver or passengers may receive injury during vehicle operation or collision.  
For your safety, take care to route all cables away from shifters, pedals, accessory controls and mechanisms.  
WARNING: Drive safely and use common sense.  
It is your responsibility as the vehicle operator to drive safely, observe all traffic rules and above all use your own  
personal judgment while driving. If you feel that a route suggested by the navigation software instructs you to  
perform an unsafe or illegal maneuver, places you in an unsafe situation, or routes you into an area which you  
consider unsafe, do not follow the instructions.  
WARNING: Keep your eyes on the road.  
It is your responsibility as the vehicle operator to keep your eyes on the road and be an alert driver at all times,  
especially when the vehicle is moving. The vehicle’s operator should not be distracted by the navigation equipment  
or software. Should there be a distraction with the ability to drive responsibly, please turn off the device. Should  
you want to look at the display for a prolonged time, park the car safely, while following all traffic regulations before  
looking at the display.  
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. Do  
not remove covers or open housings, there are no user serviceable parts inside. Refer servicing to  
qualified personnel only.  
PAGE 10 OF 13  
BT359_GPS_v1.2.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BT-359 GPS  
10. LIMITED WARRANTY  
GlobalSat/USGlobalSat warrants product hardware against manufacturing defects in material and workmanship  
under normal use for a period of one (1) year from the original date of purchase (unless the product states  
otherwise), and only when purchased from a recognized “authorized dealer”. Products purchased from any  
unauthorized source, such as unauthorized e-Bay resellers, will not qualify for free warranty service/support and  
may require the end-user to pre-pay fees associated with, but not limited to the support, repair, replacement and  
shipping of the product to and from the service center.  
Except as provided herein, GlobalSat/USGlobalSat makes no express warranties’, including but not limited to any  
warranties of merchantability or fitness for particular use, or non-infringement. You acknowledge that your use of  
the product or service is at your sole risk and you agree that the information provided are without warranty of any  
kind by GlobalSat/USGlobalSat.  
Under no circumstances, including negligence, will GlobalSat/USGlobalSat or any of its affiliates, directors, officers  
or employees, or any third party be liable for any direct, indirect, incidental, special or consequential damages that  
results from your use, or your inability to use, or the performance of the product(s) with respect to any liability, loss,  
or arising out of any breach of this warranty, including, but not limited to any damages resulting from inconvenience,  
loss of time, data, property, revenue, or profit or any indirect, special incidental or consequential damages. You  
acknowledge that this limitation applies to all content information or other services available from  
GlobalSat/USGlobalSat, and whether or not GlobalSat/USGlobalSat has notice of the possibility of such damages,  
and whether or not to circumstances giving rise to such damages may have been within the control of  
GlobalSat/USGlobalSat.  
Some states do not allow the exclusion of certain warranties, so some of the above exclusions may not apply to  
you. In those states, liability is limited to the fullest extent allowed by law By using the product(s), you agree to  
indemnify GlobalSat/USGlobalSat and its parents, subsidiaries, affiliates, officers and employees and hold them  
harmless from any and all claims and expenses, including reasonable attorney’s fees, asserted third party due to, or  
arising out of your use of the service and the site.  
In the event of a product defect during the first 30-days of the warranty period, you may return product and the sales  
receipt as proof of purchase date to place of original purchase, or you may contact GlobalSat/USGlobalSat’s  
Technical support via our web-site for a Return Merchandise Authorization (RMA) number for return to  
manufacturer.  
GlobalSat/USGlobalSat will, at its option, unless otherwise provided by law:  
a.) Correct the defect by product repair without charge for parts and labor;  
b.) Replace the product with one of the same or similar design; or  
Refund the purchase price (only if purchased directly from USGlobalSat). All replaced parts and products, and  
products on which a refund is made, become the property of GlobalSat/USGlobalSat. New or reconditioned parts  
may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for  
the remainder of the original warranty period. You will be charged for repair or replacement of the product made  
after the expiration of the warranty period.  
This warranty does not cover:  
a.) Damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or  
abnormal usage, failure to follow the instructions, improper installation or maintenance, alteration, lighting  
or other incidence of excess voltage or current;  
b.) Any repairs other than those provided by GlobalSat/USGlobalSat;  
c.) Consumables such as fuses or batteries;  
d.) Cosmetic damage;  
e.) Transportation, shipping or insurance costs;  
f.) Costs of product removal, installation, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to  
state. Additional products bundled in this package not manufactured by GlobalSat/USGlobalSat will hold separate  
warranties as expressed by the individual manufacturer of that product(s). Product specifications, functions and  
features are subject to change without notice.  
PAGE 11 OF 13  
BT359_GPS_v1.2.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BT-359 GPS  
11. BT-359 SPECIFICATIONS  
Electrical Characteristics (Receiver)  
GPS Chipset  
Frequency  
C/A Code  
Channels  
Sensitivity  
Accuracy  
SiRF Star III e/LP  
L1, 1575.42 MHZ  
1.023 MHz chip rate  
20 all-in-view tracking  
-159 dBm  
1~ 5m 2D RMS WAAS enabled  
10m 2D RMS WAAS disabled  
0.1m/sec 95% (SA off),  
Position Horizontal  
Velocity  
Time  
1 micro-second synchronized to GPS time  
WAAS  
Enabled for North America product s (USGlobalSat, Inc)  
Datum  
Datum  
WGS-84  
Acquisition Rate  
Hot start  
1 sec., average (with ephemeris and almanac valid)  
38 sec., average (with almanac but not ephemeris)  
42 sec., average (neither almanac nor ephemeris)  
0.1 sec. average (interruption recovery time)  
Warm start  
Cold start  
Reacquisition  
Protocol  
GPS Protocol  
Default: NMEA 0183 (Secondary: SiRF binary)  
SiRF binary >> position, velocity, altitude, status and control  
NMEA 0183 MEA0183 V2.2 protocol, and supports  
command: GGA, GSA, GSV, RMC, VTG, GLL v2.2 (VTG  
and GLL are optional)  
GPS Output Data  
GPS transfer rate  
Connection  
Software command setting (Default : 38400,n,8,1 for NMEA )  
Communication with host platform via Bluetooth Serial Port  
Profile  
Dynamic Condition  
Acceleration Limit  
Altitude Limit  
Velocity Limit  
Jerk Limit  
Less than 4g  
18,000 meters (60,000 feet) max.  
515 meters/sec. (1,000 knots) max.  
20 m/sec3  
Temperature  
Operating  
Storage  
Humidity  
14°~ 140°F (-10°~ 60°C)  
-4°~ 158°F (-20°~ 70°C)  
Up to 95% non-condensing  
Power  
Voltage  
5V ±5%  
Battery capacity  
Battery Life  
1100mAH  
11 hours continuous use  
Physical Characteristics  
Dimension  
3.23" x 1.61" x 0.53" (82 mm x 41 mm x 13.4 mm)  
Due to continuous product improvements, all specifications are subject to change without notice.  
FCC NOTICE  
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that may cause undesired operation.  
FCC RF Exposure requirements:  
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.  
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY  
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S  
AUTHORITY TO OPERATE THE EQUIPMENT.  
PAGE 12 OF 13  
BT359_GPS_v1.2.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Clarion CD Player DRX9675z User Manual
Conair Refrigerator UGH031 0209 User Manual
Continental Electric Portable CD Player CEPD64381 User Manual
Delta Electronics Network Card VFD PU06 User Manual
Delta Electronics Power Supply SIWC1365 User Manual
Dymo Label Maker Rhino 5200 User Manual
Dynex Switch DX ESW5 User Manual
Extron electronic Stereo Amplifier MPA 401 100V User Manual
Fellowes Paper Shredder PS 12Cs User Manual
Gefen Switch DL User Manual